aboutsummaryrefslogtreecommitdiff
path: root/ld/testsuite
AgeCommit message (Collapse)AuthorFilesLines
2021-04-21Adjust readelf's output so that section symbols without a name as shown with ↵Nick Clifton51-485/+485
their section name. binutils* readelf.c (print_dynamic_symbol): Print the section name for section symbols without a name of their own. * testsuite/binutils-all/mips/global-local-symtab-sort-n64t.d: Adjust expected output to allow for named section symbols. * testsuite/binutils-all/mips/global-local-symtab-sort-o32t.d: Likewise. * testsuite/binutils-all/readelf.s-64: Likewise. * testsuite/binutils-all/readelf.ss-64-unused: Likewise. * testsuite/binutils-all/readelf.ss-tmips: Likewise. * testsuite/binutils-all/readelf.ss-unused: Likewise. ld * testsuite/ld-aarch64/variant_pcs-now.d: Adjust expected output to allow for named section symbols. * testsuite/ld-aarch64/variant_pcs-r.d: Likewise. * testsuite/ld-aarch64/variant_pcs-shared.d: Likewise. * testsuite/ld-alpha/tlsbin.rd: Likewise. * testsuite/ld-alpha/tlsbinr.rd: Likewise. * testsuite/ld-alpha/tlspic.rd: Likewise. * testsuite/ld-arm/rodata-merge-map.sym: Likewise. * testsuite/ld-arm/script-type.sym: Likewise. * testsuite/ld-cris/libdso-2.d: Likewise. * testsuite/ld-cris/pr16044.d: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-ia64/tlsbin.rd: Likewise. * testsuite/ld-ia64/tlspic.rd: Likewise. * testsuite/ld-mips-elf/global-local-symtab-sort-n64t.d: Likewise. * testsuite/ld-mips-elf/global-local-symtab-sort-o32t.d: Likewise. * testsuite/ld-mmix/bspec1.d: Likewise. * testsuite/ld-mmix/bspec2.d: Likewise. * testsuite/ld-mmix/local1.d: Likewise. * testsuite/ld-mmix/local3.d: Likewise. * testsuite/ld-mmix/local5.d: Likewise. * testsuite/ld-mmix/local7.d: Likewise. * testsuite/ld-mmix/undef-3.d: Likewise. * testsuite/ld-powerpc/tlsso.r: Likewise. * testsuite/ld-powerpc/tlsso32.r: Likewise. * testsuite/ld-powerpc/tlstocso.r: Likewise. * testsuite/ld-s390/tlsbin.rd: Likewise. * testsuite/ld-s390/tlsbin_64.rd: Likewise. * testsuite/ld-s390/tlspic.rd: Likewise. * testsuite/ld-s390/tlspic_64.rd: Likewise. * testsuite/ld-sparc/gotop32.rd: Likewise. * testsuite/ld-sparc/gotop64.rd: Likewise. * testsuite/ld-sparc/tlssunbin32.rd: Likewise. * testsuite/ld-sparc/tlssunbin64.rd: Likewise. * testsuite/ld-sparc/tlssunnopic32.rd: Likewise. * testsuite/ld-sparc/tlssunnopic64.rd: Likewise. * testsuite/ld-sparc/tlssunpic32.rd: Likewise. * testsuite/ld-sparc/tlssunpic64.rd: Likewise. * testsuite/ld-tic6x/common.d: Likewise. * testsuite/ld-tic6x/shlib-1.rd: Likewise. * testsuite/ld-tic6x/shlib-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-noindex.rd: Likewise. * testsuite/ld-tic6x/static-app-1.rd: Likewise. * testsuite/ld-tic6x/static-app-1b.rd: Likewise. * testsuite/ld-tic6x/static-app-1r.rd: Likewise. * testsuite/ld-tic6x/static-app-1rb.rd: Likewise. gas * testsuite/gas/aarch64/dwarf.d: Adjust expected output to allow for named section symbols. * testsuite/gas/arm/thumbver.d: Likewise. * testsuite/gas/bfin/loop_temps.d: Likewise. * testsuite/gas/elf/section2.e-arc: Likewise. * testsuite/gas/elf/section2.e-arm: Likewise. * testsuite/gas/elf/section2.e-csky: Likewise. * testsuite/gas/elf/section2.e-m32r: Likewise. * testsuite/gas/elf/section2.e-mips: Likewise. * testsuite/gas/elf/section2.e-msp430: Likewise. * testsuite/gas/elf/section2.e-riscv: Likewise. * testsuite/gas/elf/section2.e-rl78: Likewise. * testsuite/gas/elf/section2.e-rx: Likewise. * testsuite/gas/elf/section2.e-score: Likewise. * testsuite/gas/elf/section2.e-tic6x: Likewise. * testsuite/gas/elf/section2.e-unused: Likewise. * testsuite/gas/elf/section2.e-v850: Likewise. * testsuite/gas/elf/section2.e-xtensa: Likewise. * testsuite/gas/ia64/alias-ilp32.d: Likewise. * testsuite/gas/ia64/alias.d: Likewise. * testsuite/gas/ia64/global.d: Likewise. * testsuite/gas/microblaze/relax_size.elf: Likewise. * testsuite/gas/microblaze/relax_size2.elf: Likewise. * testsuite/gas/mips/global-local-symtab-sort-n64t.d: Likewise. * testsuite/gas/mips/global-local-symtab-sort-o32t.d: Likewise. * testsuite/gas/mmix/bspec-1.d: Likewise. * testsuite/gas/mmix/byte-1.d: Likewise. * testsuite/gas/mmix/comment-1.d: Likewise. * testsuite/gas/mmix/loc-1.d: Likewise. * testsuite/gas/mmix/loc-2.d: Likewise. * testsuite/gas/mmix/loc-3.d: Likewise. * testsuite/gas/mmix/loc-4.d: Likewise. * testsuite/gas/mmix/loc-5.d: Likewise. * testsuite/gas/tic6x/scomm-directive-4.d: Likewise.
2021-04-20Rework the R_NEG support on both gas and ld for the PowerPC AIX targets, in ↵Cl?ment Chigot5-0/+83
order to manage C++ exceptions built with GCC. bfd PR binutils/21700 * reloc.c (BFD_RELOC_PPC_NEG): New relocation. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * coff-rs6000.c (_bfd_xcoff_reloc_type_lookup): Add BFD_RELOC_PPC_NEG handler. (xcoff_reloc_type_neg): Correctly substract addend. * coff64-rs6000.c (xcoff64_howto_table): Add R_NEG_32 howto. (xcoff64_rtype2howto): Add handler for R_NEG_32. (xcoff64_reloc_type_lookup): Add BFD_RELOC_PPC_NEG handler. * xcofflink.c (xcoff_need_ldrel_p): Check output section for R_POS-like relocations. New argument added. (xcoff_mark): Adapt to new xcoff_need_ldrel_p argument. (xcoff_link_input_bfd): Likewise. gas * config/tc-ppc.c (ppc_get_csect_to_adjust): New function. (ppc_fix_adjustable): Manage fx_subsy part. (tc_gen_reloc): Create second relocation when both fx_addsy and fx_subsy are provided. * config/tc-ppc.h (RELOC_EXPANSION_POSSIBLE): New define. (MAX_RELOC_EXPANSION): Likewise. (TC_FORCE_RELOCATION_SUB_SAME): Likewise (UNDEFINED_DIFFERENCE_OK): Likewise * testsuite/gas/all/gas.exp: Skip difference between two undefined symbols test. ld * testsuite/ld-powerpc/aix52.exp: Add new test. * testsuite/ld-powerpc/aix-neg-reloc-32.d: New test. * testsuite/ld-powerpc/aix-neg-reloc-64.d: New test. * testsuite/ld-powerpc/aix-neg-reloc.ex: New test. * testsuite/ld-powerpc/aix-neg-reloc.s: New test.
2021-04-09PowerPC disassembly of pcrel referencesAlan Modra11-56/+56
This adds some annotation to Power10 pcrel instructions, displaying the target address (ie. pc + D34 field) plus a symbol if there is one at exactly that target address. pld from the .got or .plt will also look up the entry and display it, symbolically if there is a dynamic relocation on the entry. include/ * dis-asm.h (struct disassemble_info): Add dynrelbuf and dynrelcount. binutils/ * objdump.c (struct objdump_disasm_info): Delete dynrelbuf and dynrelcount. (find_symbol_for_address): Adjust for dynrelbuf and dynrelcount move. (disassemble_section, disassemble_data): Likewise. opcodes/ * ppc-dis.c (struct dis_private): Add "special". (POWERPC_DIALECT): Delete. Replace uses with.. (private_data): ..this. New inline function. (disassemble_init_powerpc): Init "special" names. (skip_optional_operands): Add is_pcrel arg, set when detecting R field of prefix instructions. (bsearch_reloc, print_got_plt): New functions. (print_insn_powerpc): For pcrel instructions, print target address and symbol if known, and decode plt and got loads too. gas/ * testsuite/gas/ppc/prefix-pcrel.d: Update expected output. * testsuite/gas/ppc/prefix-reloc.d: Likewise. * gas/testsuite/gas/ppc/vsx_32byte.d: Likewise. ld/ * testsuite/ld-powerpc/inlinepcrel-1.d: Update expected output. * testsuite/ld-powerpc/inlinepcrel-2.d: Likewise. * testsuite/ld-powerpc/notoc2.d: Likewise. * testsuite/ld-powerpc/notoc3.d: Likewise. * testsuite/ld-powerpc/pcrelopt.d: Likewise. * testsuite/ld-powerpc/startstop.d: Likewise. * testsuite/ld-powerpc/tlsget.d: Likewise. * testsuite/ld-powerpc/tlsget2.d: Likewise. * testsuite/ld-powerpc/tlsld.d: Likewise. * testsuite/ld-powerpc/weak1.d: Likewise. * testsuite/ld-powerpc/weak1so.d: Likewise.
2021-04-01PE/Windows x86_64: Fix weak undef symbols after image base changeTamar Christina3-0/+71
The change in PR19011 changed the image load address from being in the lower 32-bit address space to the higher 64-bit address space. However when you have a weak undef symbol which stays undef at the end of linking the linker has to resolve this (Windows loader does not support undef symbols). As such typically these would resolve to 0. The relocation used for these weak symbols are the normal 32-bit PC_REL call relocs. So when doing the overflow check LD checks if the distance between the symbol and the call is within range. However now that the load address is > 32-bits and the symbol val is 0 this overflow check will always fail. As such the linker gives a bogus error. This patch makes the linker not emit the overflow failure but chooses to still let the check be performed (as it's mid-end code). One down side of this is that it does break the common convention that the call be to sym at 0x0. i.e. before you'd get 401015: 74 05 je 40101c 401017: e8 e4 ef bf ff callq 0 and now you get 140001015: 74 05 je 14000101c 140001017: e8 e4 ef ff bf call 100000000 since the call is PC_REL there's no way to get the range large enough to resolve to 0. As such I have chosen to leave it as the furthest simple range that we can still represent. By only ignoring the error we leave the symbol value itself to still be 0 such that the if(<symbol>) checks still work correctly. bfd/ChangeLog: 2021-04-01 Tamar Christina <tamar.christina@arm.com> PR ld/26659 * cofflink.c (_bfd_coff_generic_relocate_section): Ignore overflow. ld/ChangeLog: 2021-04-01 Tamar Christina <tamar.christina@arm.com> PR ld/26659 * testsuite/ld-pe/pe.exp: Add test. * testsuite/ld-pe/pr26659-weak-undef-sym.d: New test. * testsuite/ld-pe/pr26659-weak-undef-sym.s: New test.
2021-03-31Remove bfd_stdint.hAlan Modra15-17/+17
If we require C99 for binutils then stdint.h is available. bfd/ * .gitignore: Delete bfd_stdint.h entry. * Makefile.am (bfdinclude_HEADERS): Delete bfd_stdint.h. (BUILD_HFILES, LOCAL_H_DEPS): Likewise. * bfd-in.h: Include stdint.h in place of bfd_stdint.h. * configure.ac: Don't invoke GCC_HEADER_STDINT. * configure.com: Don't create bfd_stdint.h. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * bfd-in2.h: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. binutils/ * coffdump.c: Include stdint.h in place of bfd_stdint.h. * dwarf.c: Likewise. gas/ * config/tc-aarch64.c: Include stdint.h in place of bfd_stdint.h. * config/tc-crx.c: Likewise. * config/tc-nds32.h: Likewise. include/ * cgen/basic-modes.h: Include stdint.h in place of bfd_stdint.h. * elf/nfp.h: Likewise. * opcode/aarch64.h: Likewise. * opcode/cgen.h: Likewise. * opcode/nfp.h: Likewise. * opcode/ppc.h: Likewise. ld/ * elf-hints-local.h: Include stdint.h in place of bfd_stdint.h. * emultempl/nds32elf.em: Likewise. * testsuite/ld-elf/mbind2b.c: Likewise. * testsuite/ld-elf/pr18718.c: Likewise. * testsuite/ld-elf/pr18720a.c: Likewise. * testsuite/ld-elf/pr25749-1.c: Likewise. * testsuite/ld-elf/pr25749-1a.c: Likewise. * testsuite/ld-elf/pr25749-1b.c: Likewise. * testsuite/ld-elf/pr25749-1c.c: Likewise. * testsuite/ld-elf/pr25749-1d.c: Likewise. * testsuite/ld-elf/pr25749-2.c: Likewise. * testsuite/ld-elf/pr25754-1a.c: Likewise. * testsuite/ld-elf/pr25754-2a.c: Likewise. * testsuite/ld-elf/pr25754-3a.c: Likewise. * testsuite/ld-elf/pr25754-4a.c: Likewise. * testsuite/ld-elf/pr25754-5a.c: Likewise. * testsuite/ld-elf/pr25754-6a.c: Likewise. opcodes/ * aarch64-dis.c: Include stdint.h in place of bfd_stdint.h. * aarch64-dis.h: Likewise. * aarch64-opc.c: Likewise. * avr-dis.c: Likewise. * csky-dis.c: Likewise. * nds32-asm.c: Likewise. * nds32-dis.c: Likewise. * nfp-dis.c: Likewise. * riscv-dis.c: Likewise. * s12z-dis.c: Likewise. * wasm32-dis.c: Likewise.
2021-03-25ld: do not rely on the exact size of the CTF symtypetabs in test resultsNick Alcock5-8/+8
The data object and function info sections (collectively "symtypetabs") usually (i.e. if non-indexed) have sizes defined by the size of the ELF dynamic symbol table in the object they are linked to. This means test results should not depend on the exact sizes of these sections, because adding entirely irrelevant symbols to the dynsym can cause spurious test failures. (This also means we should not match the offset of sections that follow them, since those too depend on the exact size of the symtypetab sections.) Spotted by turning the sanitizer on, which introduced new dynsym entries and expanded the symtypetab sizes to match. ld/ChangeLog 2021-03-25 Nick Alcock <nick.alcock@oracle.com> * testsuite/ld-ctf/array.d: Only check that the data object section is nonempty: do not check its exact size. * testsuite/ld-ctf/diag-parlabel.d: Likewise. * testsuite/ld-ctf/slice.d: Likewise. * testsuite/ld-ctf/data-func-conflicted.d: Likewise, and for the func info section too. * testsuite/ld-ctf/function.d: Likewise, for the func info section.
2021-03-19x86-64: Add a testcase for PR ld/27590H.J. Lu4-0/+16
PR ld/27590 * testsuite/ld-x86-64/pr27590.rd: New file. * testsuite/ld-x86-64/pr27590a.obj.bz2: Likewise. * testsuite/ld-x86-64/pr27590b.obj.bz2: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run ld/27590 test.
2021-03-19pr27590 testcase fixesAlan Modra2-4/+8
PR 27590 * testsuite/ld-elf/pr27590a.d: Match relocs using label, and R_MIPS_NONE. * testsuite/ld-elf/pr27590b.d: Likewise.
2021-03-18elf: Handle .gnu.debuglto_.debug_* sectionsH.J. Lu4-2/+33
commit 994b25132814f4c2be93ce53a616a74139c4cf3c Author: H.J. Lu <hjl.tools@gmail.com> Date: Sun Jan 17 20:01:16 2021 -0800 ld/elf: Ignore section symbols when matching linkonce with comdat ignored section symbols when comparing symbols in 2 sections. Since all references to debugging sections are done with section symbols, symbols in debugging sections are ignored and we fail to match symbols in comdat debugging sections. Also .gnu.debuglto_.debug_* sections aren't treated as debugging sections. 1. Treate .gnu.debuglto_.debug_ section as debugging section unless it is marked with SHF_EXCLUDE. 2. Revert commit 994b2513281 in elf_create_symbuf. 3. Ignore section symbols only when matching non-debugging sections or linkonce section with comdat section. bfd/ PR ld/27590 * elf.c (_bfd_elf_make_section_from_shdr): Treate .gnu.debuglto_.debug_ section as debugging section unless it is marked with SHF_EXCLUDE. * elflink.c (elf_create_symbuf): Revert commit 994b2513281. (bfd_elf_match_symbols_in_sections): Ignore section symbols when matching non-debugging sections or linkonce section with comdat section. ld/ PR ld/27590 * testsuite/ld-elf/pr27590.s: New file. * testsuite/ld-elf/pr27590a.d: Likewise. * testsuite/ld-elf/pr27590b.d: Likewise. * testsuite/ld-i386/i386.exp: Also run ld/27193 test with --reduce-memory-overheads.
2021-03-18DWARF: Check version >= 3 for DW_FORM_ref_addrH.J. Lu4-0/+8
Check version >= 3, instead of version == 3 || version == 4, for DW_FORM_ref_addr. bfd/ PR ld/27587 * dwarf2.c (read_attribute_value): Check version >= 3 for DW_FORM_ref_addr. ld/ PR ld/27587 * testsuite/ld-x86-64/pr27587.err: New file. * testsuite/ld-x86-64/pr27587a.obj.bz2: Likewise. * testsuite/ld-x86-64/pr27587b.obj.bz2: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run PR ld/27587 test.
2021-03-18libctf: support encodings for enumsNick Alcock2-2/+5
The previous commit started to error-check the lookup of ctf_type_encoding for the underlying type that is internally done when carrying out a ctf_type_encoding on a slice. Unfortunately, enums have no encoding, so this has historically been returning an error (which is ignored) and then populating the cte_format with uninitialized data. Now the error is not ignored, this is returning an error, which breaks linking of CTF containing bitfields of enumerated type. CTF format v3 does not record the actual underlying type of a enum, but we can mock up something that is not *too* wrong, and that is at any rate better than uninitialized data. ld/ChangeLog 2021-03-18 Nick Alcock <nick.alcock@oracle.com> * testsuite/ld-ctf/slice.c: Check slices of enums too. * testsuite/ld-ctf/slice.d: Results adjusted. libctf/ChangeLog 2021-03-18 Nick Alcock <nick.alcock@oracle.com> * ctf-types.c (ctf_type_encoding): Support, after a fashion, for enums. * ctf-dump.c (ctf_dump_format_type): Do not report enums' degenerate encoding.
2021-03-12aix: implement TLS relocation for gas and ldClément Chigot9-0/+182
Add support for TLS in XCOFF. Amongst the things done by this commit: - Update XCOFF auxialiary header to match new version and allow TLS sections. - Add TLS sections (.tdata and .tbss) support in gas and ld. - Add support for the TLS relocations in gas and ld. Two different types BFD_RELOC are created for PPC and PPC64 as the size is a pointer, thus distinct in 32 or 64bit. The addresses given by ld to .tdata and .tbss is a bit special. In XCOFF, these addresses are actually offsets from the TLS pointer computed at runtime. AIX assembly and linker does the same. In top of that, the .tdata must be before .data (this is mandatory for AIX loader). Thus, the aix ld script is recomputing "." before .data to restore its original value. There might be a simpler way, but this one is working. Optimisation linked to TLS relocations aren't yet implemented. bfd/ * reloc.c (BFD_RELOC_PPC_TLS_LE, BFD_RELOC_PPC_TLS_IE, BFD_RELOC_PPC_TLS_M, BFD_RELOC_PPC_TLS_ML, BFD_RELOC_PPC64_TLS_GD, BFD_RELOC_PPC64_TLS_LD, BFD_RELOC_PPC64_TLS_LE, BFD_RELOC_PPC64_TLS_IE, BFD_RELOC_PPC64_TLS_M, BFD_RELOC_PPC64_TLS_ML): New relocations. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * coff-rs6000.c (xcoff_calculate_relocation): Call xcoff_reloc_type_tls for TLS relocations. (xcoff_howto_table): Implement TLS relocations. (_bfd_xcoff_reloc_type_lookup): Add cases TLS relocations. (xcoff_reloc_type_tls): New function. * coff64-rs6000.c (xcoff_calculate_relocation): Likewise. (xcoff_howto_table): Likewise. (_bfd_xcoff_reloc_type_lookup): Likewise. * coffcode.h (sec_to_styp_flags): Handle TLS sections. (styp_to_sec_flags): Likewise. (coff_compute_section_file_positions): Avoid file offset optimisation for .data when the previous section is .tdata. (coff_write_object_contents): Handle TLS sections. * coffswap.h (coff_swap_aouthdr_out): Add support for new fields in aouthdr. * libxcoff.h (xcoff_reloc_type_tls): Add prototype. * xcofflink.c (xcoff_link_add_symbols): Handle XMC_UL. (xcoff_need_ldrel_p): Add cases for TLS relocations. (xcoff_create_ldrel): Add l_symndx for TLS sections. gas/ * config/tc-ppc.c (ppc_xcoff_text_section, ppc_xcoff_data_section, (ppc_xcoff_bss_section, ppc_xcoff_tdata_section, (ppc_xcoff_tbss_section): New variables. (ppc_text_subsegment, ppc_text_csects, ppc_data_subgments, (ppc_data_csects): Removed. (ppc_xcoff_section_is_initialized, ppc_init_xcoff_section, ppc_xcoff_parse_cons): New functions. (md_being): Initialize XCOFF sections. (ppc_xcoff_suffix): Add support for TLS relocations (fixup_size, md_apply_fix): Add support for new BFD_RELOC. (ppc_change_csect): Handle XMC_TL, XMC_UL. Correctly, add XMC_BS to .bss section. Handle new XCOFF section variables. (ppc_comm): Likewise. (ppc_toc): Likewise. (ppc_symbol_new_hook): Likewise. (ppc_frob_symbol): Likewise. (ppc_fix_adjustable): Add tbss support. * config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): New define. (ppc_xcoff_parse_cons): Add prototype. (struct ppc_xcoff_section): New structure. ld/ * emultempl/aix.em: Ensure .tdata section is removed if empty, even with -r flag. * scripttempl/aix.sc: Handle TLS sections. * testsuite/ld-powerpc/aix52.exp: Add new tests. * testsuite/ld-powerpc/aix-tls-reloc-32.d: New test. * testsuite/ld-powerpc/aix-tls-reloc-64.d: New test. * testsuite/ld-powerpc/aix-tls-reloc.ex: New test. * testsuite/ld-powerpc/aix-tls-reloc.s: New test. * testsuite/ld-powerpc/aix-tls-section-32.d: New test. * testsuite/ld-powerpc/aix-tls-section-64.d: New test. * testsuite/ld-powerpc/aix-tls-section.ex: New test. * testsuite/ld-powerpc/aix-tls-section.s: New test. include/ * coff/internal.h (struct internal_aouthdr): Add new fields. * coff/rs6000.h (AOUTHDRÃ): Add new fields. * coff/rs6k64.h (struct external_filehdr): Likewise. * coff/xcoff.h (_TDATA), _TBSS): New defines (RS6K_AOUTHDR_TLS_LE, RS6K_AOUTHDR_RAS, RS6K_AOUTHDR_ALGNTDATA, RS6K_AOUTHDR_SHR_SYMTAB, RS6K_AOUTHDR_FORK_POLICY, RS6K_AOUTHDR_FORK_COR): New defines. (XMC_TU): Removed. (XMC_UL): New define.
2021-03-12aix: implement R_TOCU and R_TOCL relocationsClément Chigot5-0/+83
Implement support for largetoc on XCOFF. R_TOCU and R_TOCL are referenced by the new BFD defines: BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO. A new toc storage class is added XMC_TE. In order to correctly handle R_TOCU, the logic behind xcoff_reloc_type_toc is changed to compute the whole TOC offset instead of just the difference between the "link" offset and the "assembly" offset. In gas, add a function to transform addis format used by AIX "addis RT, D(RA)" into the ELF format "addis RT, RA, SI". bfd/ * reloc.c (BFD_RELOC_PPC_TOC16_HI, BFD_RELOC_PPC_TOC16_LO): New relocations. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * coff-rs6000.c (xcoff_calculate_relocation): Call xcoff_reloc_type_toc for R_TOCU and R_TOCL. (xcoff_howto_table): Remove src_mask for TOC relocations. Add R_TOCU and R_TOCL howtos. (_bfd_xcoff_reloc_type_lookup): Add cases for BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO. (xcoff_reloc_type_toc): Compute the whole offset. Implement R_TOCU and R_TOCL. * coff64-rs6000.c (xcoff64_calculate_relocation): Likewise. (xcoff64_howto_table): Likewise. (xcoff64_reloc_type_lookup): Likewise. gas/ * config/tc-ppc.c (ppc_xcoff_suffix): New function. (MAP, MAP32, MAP64): New macros for XCOFF. (ppc_xcoff_fixup_addis): New function. (ppc_is_toc_sym): Handle XMC_TE. (fixup_size): Add cases for BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO. (md_assemble): Call ppc_xcoff_fixup_addis for XCOFF. (ppc_change_csect): Handle XMC_TE. (ppc_tc): Enable .tc symbols to have only a XMC_TC or XMC_TE storage class. (ppc_symbol_new_hook): Handle XMC_TE. (ppc_frob_symbol): Likewise. (ppc_fix_adjustable): Likewise. (md_apply_fix): Handle BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO. ld/ * scripttempl/aix.sc: Add .te to .data section. * testsuite/ld-powerpc/aix52.exp: Add test structure for AIX7+. Add aix-largetoc-1 test. * testsuite/ld-powerpc/aix-largetoc-1-32.d: New test. * testsuite/ld-powerpc/aix-largetoc-1-64.d: New test. * testsuite/ld-powerpc/aix-largetoc-1.ex: New test. * testsuite/ld-powerpc/aix-largetoc-1.s: New test.
2021-03-12PE image base falloutAlan Modra6-21/+43
Fixes x86_64-w64-mingw32 tests that failed with the recent diagnosis for out of range RVA, and a couple of other gc-sections tests that failed for other reasons. * testsuite/ld-gc/gc.exp: Pass "-image-base 0" to ld for PE, and arrange to define __main for some run_dump_test tests. * testsuite/ld-gc/pr13683.d: Accept more symbols. * testsuite/ld-gc/pr14265.d: Likewise, and ordering. * testsuite/ld-scripts/crossref.exp: Pass "-image-base 0" to ld for PE. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/lib/ld-lib.exp (ld_link_defsyms): Use is_pecoff_format.
2021-03-11RISC-V: Improve multiple relax passes problem.Nelson Chu3-0/+32
According to the commit abd20cb637008da9d32018b4b03973e119388a0a, an intersting thing is that - the more relax passes, the more chances of relaxations are reduced [1]. Originally, we set the boolean `again` to TRUE once the code is actually deleted, and then we run the relaxations repeatedly if `again` is still TRUE. But `again` only works for the relax pass itself, and won't affect others. That is - we can not use `again` to re-run the relax pass when we already enter into the following passes (can not run the relax passes backwards). Besides, we must seperate the PCREL relaxations into two relax passes for some reasons [2], it make us lose some relax opportunities. This patch try to fix the problem, and the basic idea was come from Jim Wilson - we use a new boolean, restart_relax, to determine if we need to run the whole relax passes again from 0 to 2. Once we have deleted the code between relax pass 0 to 2, the restart_relax will be set to TRUE, we should run the whole relaxations again to give them more chances to shorten the code. We will only enter into the relax pass 3 when the restart_relax is FALSE, since we can't relax anything else once we start to handle the alignments. I have passed the gcc/binutils regressions by riscv-gnu-toolchain, and looks fine for now. [1] https://sourceware.org/pipermail/binutils/2020-November/114223.html [2] https://sourceware.org/pipermail/binutils/2020-November/114235.html bfd/ * elfnn-riscv.c (riscv_elf_link_hash_table): New boolean restart_relax, used to check if we need to run the whole relaxations from relax pass 0 to 2 again. (riscv_elf_link_hash_table_create): Init restart_relax to FALSE. (_bfd_riscv_relax_align): Remove obsolete sec_flg0 set. (_bfd_riscv_relax_delete): Set again to TRUE if we do delete the code. (bfd_elfNN_riscv_restart_relax_sections): New function. Called by after_allocation to check if we need to run the whole relaxations again. (_bfd_riscv_relax_section): We will only enter into the relax pass 3 when the restart_relax is FALSE; At last set restart_relax to TRUE if again is TRUE, too. * elfxx-riscv.h (bfd_elf32_riscv_restart_relax_sections): Declaration. (bfd_elf64_riscv_restart_relax_sections): Likewise. ld/ * emultempl/riscvelf.em (after_allocation): Run ldelf_map_segments many times if riscv_restart_relax_sections returns TRUE. * testsuite/ld-riscv-elf/restart-relax.d: New testcase. Before applying this patch, the call won't be relaxed to jal; But now we have more chances to do relaxations. * testsuite/ld-riscv-elf/restart-relax.s: Likewise. * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
2021-03-10bfd: strip symbols not representable in COFF/PE symbol tableJan Beulich2-3/+2
The offset-within-section field in the symbol table entry is only 32 bits wide, so rather than emitting bogus entries omit them, and issue a diagnostic identifying the issue. This requires adjusting the PR/22267 test to no longer produce symbols with out of range values on 64-bit BFD. This also depends on adjustments to testsuite/ld-scripts/map-address.* made by an earlier patch. The purpose of the test can very well be achieved nevertheless.
2021-03-09ld: adjust PE base relocations testcaseJan Beulich2-1/+9
mcore-pe and sh-pe pointed out that the testcase added by 6fa7408d72b3 ("ld: don't generate base relocations in PE output for absolute symbols") wasn't quite generic enough yet. Copy entry point stuff from another test and increase alignment to also cover targets with a page size lower than 4k. Despite all of this the test needs to be xfail-ed for mcore, as this target isn't included in the set getting DLL_SUPPORT enabled in emultempl/pe.em, and hence no base relocations get generated there (yet).
2021-03-09bfd: don't silently wrap or truncate PE image section RVAsJan Beulich11-14/+43
In PE images section addresses get expressed as addresses relative to the image base. Therefore the VA of a section must be no less than the image base, and after subtraction of the image base the resulting value should fit in 32 bits. (The issue is particularly obvious to notice when sections, perhaps because of ELF assumptions, get placed at VA 0 by default. Debugging info sections as well as .comment, when input files are ELF, are a good example. All such sections need proper mentioning in the linker script to avoid this warning.) There are a number of test cases which previously produced bogus images, yet still declared the test a success. Like done for other tests already, force a zero image base for these. This then also allows (and requires) dropping again xfail-s which 39a7b38fac0e ("Fix linker tests to work with 16-bit targets") had added to ld-scripts/default-script*.d (originally as skip-s). This also depends on similar adjustments to testsuite/ld-scripts/map-address.* made by an earlier patch. For ld-scripts/print-memory-usage.* I suppose xcoff could be dropped from the exclusion list by suppressing garbage collection, just like already done in e.g. (as seen in the diff here) ld-scripts/data.*, but I didn't want to make unrelated adjustments.
2021-03-05elf/x86-64: Subtract __ImageBase for R_AMD64_IMAGEBASEH.J. Lu9-1/+107
When linking Windows x86-64 relocatable object files to generate x86-64 ELF executable, we need to subtract __ImageBase, aka __executable_start, for R_AMD64_IMAGEBASE relocation: 1. Add link_info to struct output_elf_obj_tdata to store linker info and _bfd_get_link_info() to retrieve it. 2. Add ldelf_set_output_arch to set up link_info. 3. Add pex64_link_add_symbols to create an indirect reference to __executable_start for __ImageBase to support R_AMD64_IMAGEBASE relocation when adding symbols from Windows x86-64 relocatable object files to generate x86-64 ELF executable. 4. Also subtract __ImageBase for R_AMD64_IMAGEBASE when generating x86-64 ELF executable. bfd/ PR ld/27425 PR ld/27432 * bfd.c (_bfd_get_link_info): New function. * elf-bfd.h (output_elf_obj_tdata): Add link_info. (elf_link_info): New. * libbfd-in.h (_bfd_get_link_info): New prototype. * coff-x86_64.c (coff_amd64_reloc): Also subtract __ImageBase for R_AMD64_IMAGEBASE when generating x86-64 ELF executable. * pe-x86_64.c: Include "coff/internal.h" and "libcoff.h". (pex64_link_add_symbols): New function. (coff_bfd_link_add_symbols): New macro. * libbfd.h: Regenerated. ld/ PR ld/27425 PR ld/27432 * ldelf.c (ldelf_set_output_arch): New function. * ldelf.h (ldelf_set_output_arch): New prototype. * emultempl/elf.em (LDEMUL_SET_OUTPUT_ARCH): Default to ldelf_set_output_arch. * ld-x86-64/pe-x86-64-1.od: Expect __executable_start. * testsuite/ld-x86-64/pe-x86-64-2.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-3.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-4.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-5.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-5.rd: Likewise. * testsuite/ld-x86-64/pe-x86-64-6.obj.bz2: New file. * testsuite/ld-x86-64/pe-x86-64-6.od: Likewise. * testsuite/ld-x86-64/pe-x86-64.exp: Run ld/27425 test.
2021-03-04ld: adjust ld-scripts/map-address.*Jan Beulich2-4/+13
Without setting an image base address and without naming at least .text, this test produces entirely bogus PE output. To be honest, even the ELF output looks odd: .text gets placed at 0x10204, and both foo and bar get associated with .text despite living below its start address. Since neither image base nor .text placement are the subject of this test, specify .text placement explicitly and in the PE case force the image base to zero.
2021-03-04ld: don't generate base relocations in PE output for absolute symbolsJan Beulich3-0/+29
It is the very nature of absolute symbols that they don't change even if the loader decides to put the image at other than its link-time base address. Of the linker-defined (and PE-specific) symbols __image_base__ (and its alias) needs special casing, as it'll still appear to be absolute at this point. A new inquiry function in ldexp.c is needed because PE base relocations get generated before ldexp_finalize_syms() runs, yet whether a relocation is needed depends on the ultimate property of a symbol.
2021-03-03--gc-sections with groups and start/stop symsAlan Modra5-0/+68
The testcases added here show situations where synthesized start/stop symbols don't cause their associated input sections to be marked. Fixed with the elflink.c and ldlang.c changes. bfd/ PR 27500 * elflink.c (_bfd_elf_gc_mark_rsec): Do special start/stop processing not when start/stop symbol section is unmarked but on first time a start/stop symbol is processed. ld/ * ldlang.c (insert_undefined): Don't mark symbols here. (lang_mark_undefineds): Do so here instead, new function. (lang_process): Call lang_mark_undefineds. * testsuite/ld-gc/start3.d, * testsuite/ld-gc/start3.s: New test. * testsuite/ld-gc/start4.d, * testsuite/ld-gc/start4.s: New test. * testsuite/ld-gc/gc.exp: Run them.
2021-03-03ld-gc tests on underscore targetsAlan Modra9-18/+35
Adjust tests to reference __start and __stop syms with an extra leading underscore when appropriate, and run tests on more targets. * testsuite/ld-gc/gc.exp: Define UNDERSCORE in ASFLAGS. Move tests with ELF section directives to is_elf_format block. * testsuite/ld-gc/abi-note.d: Run on more targets. * testsuite/ld-gc/pr19167.d: Likewise and adjust xfails. * testsuite/ld-gc/start.d: Likewise. * testsuite/ld-gc/start2.d: Likewise. * testsuite/ld-gc/stop.d: Likewise. * testsuite/ld-gc/pr19167a.s: Add support for underscore targets. * testsuite/ld-gc/start.s: Likewise. * testsuite/ld-gc/start2.s: Likewise.
2021-03-02PR27451, -z start_stop_gc for powerpc64Alan Modra4-0/+31
PowerPC64 has its own gc_mark_dynamic_ref. bfd/ PR 27451 * elf64-ppc.c (ppc64_elf_gc_mark_dynamic_ref): Ignore synthesized linker defined start/stop symbols when start_stop_gc. ld/ * testsuite/ld-powerpc/startstop.d, * testsuite/ld-powerpc/startstop.r, * testsuite/ld-powerpc/startstop.s: New test. * testsuite/ld-powerpc/powerpc.exp: Run it.
2021-03-02PowerPC64 undefined weak visibility vs GOT optimisationAlan Modra6-0/+92
Undefined weak symbols with non-default visibility are seen as local by SYMBOL_REFERENCES_LOCAL. This stops a got indirect to relative optimisation for them, so that pies and dlls don't get non-zero values when loading somewhere other than the address they are linked at (which always happens). The optimisation could be allowed for pdes, but I thought it best not to allow it there too. bfd/ * elf64-ppc.c (ppc64_elf_relocate_section): Don't optimise got indirect to pc-relative or toc-relative for undefined symbols. ld/ * testsuite/ld-powerpc/weak1.d, * testsuite/ld-powerpc/weak1.r, * testsuite/ld-powerpc/weak1.s, * testsuite/ld-powerpc/weak1so.d, * testsuite/ld-powerpc/weak1so.r: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.
2021-03-01PR27451, -z start_stop_gcAlan Modra3-0/+18
When --gc-sections is in effect, a reference from a retained section to __start_SECNAME or __stop_SECNAME causes all input sections named SECNAME to also be retained, if SECNAME is representable as a C identifier and either __start_SECNAME or __stop_SECNAME is synthesized by the linker. Add an option to disable that feature, effectively ignoring any relocation that references a synthesized linker defined __start_ or __stop_ symbol. PR 27451 include/ * bfdlink.h (struct bfd_link_info): Add start_stop_gc. bfd/ * elflink.c (_bfd_elf_gc_mark_rsec): Ignore synthesized linker defined start/stop symbols when start_stop_gc. (bfd_elf_gc_mark_dynamic_ref_symbol): Likewise. (bfd_elf_define_start_stop): Don't modify ldscript_def syms. * linker.c (bfd_generic_define_start_stop): Likewise. ld/ * emultempl/elf.em: Handle -z start-stop-gc and -z nostart-stop-gc. * lexsup.c (elf_static_list_options): Display help for them. Move help for -z stack-size to here from elf_shlib_list_options. Add help for -z start-stop-visibility and -z undefs. * ld.texi: Document -z start-stop-gc and -z nostart-stop-gc. * NEWS: Mention -z start-stop-gc. * testsuite/ld-gc/start2.s, * testsuite/ld-gc/start2.d: New test. * testsuite/ld-gc/gc.exp: Run it.
2021-03-01PR27128, nm -P portable output format regressionAlan Modra6-6/+6
Add nm --without-symbol-versions. binutils/ PR 27128 * doc/binutils.texi: Add nm --with-symbol-versions and --without-symbol-versions documentation. * nm.c (with_symbol_versions): New variable. (enum long_option_values): Delete OPTION_WITH_SYMBOL_VERSIONS. (long_options): Make --with-symbol-versions entry twiddle the flag. Add --without-symbol-versions. (print_symname): Strip version when !with_symbol_versions. Add dynamic version info under control of with_symbol_versions. (main): Remove OPTION_WITH_SYMBOL_VERSIONS case. ld/ * testsuite/ld-elf/pr25708.d: Add --with-symbol-versions to nm. * testsuite/ld-elf/pr27128a.d: Likewise. * testsuite/ld-elf/pr27128b.d: Likewise. * testsuite/ld-elf/pr27128c.d: Likewise. * testsuite/ld-elf/pr27128d.d: Likewise. * testsuite/ld-elf/pr27128e.d: Likewise.
2021-02-26Add PR27441 testcaseAlan Modra5-0/+27
PR 27441 * testsuite/ld-plugin/pr27441a.c, * testsuite/ld-plugin/pr27441b.c, * testsuite/ld-plugin/pr27441c.c, * testsuite/ld-plugin/pr27441c.d: New test. * testsuite/ld-plugin/lto.exp: Run it.
2021-02-21Warn when a script redefines a symbolAlan Modra1-2/+3
Note that we don't even warn if scripts adjust a symbol as in ld-elf/var1 and ld-scripts/pr14962. include/ * bfdlink.h (struct bfd_link_info): Add warn_multiple_definition. ld/ * ldexp.c (exp_fold_tree_1): Warn on script defining a symbol defined in an object file. * ldmain.c (multiple_definition): Heed info->warn_multiple_definition. * testsuite/ld-scripts/defined5.d: Expect a warning.
2021-02-20readelf: Replace procesor with processorH.J. Lu3-3/+3
binutils/ PR binutils/27445 * readelf.c (print_gnu_property_note): Replace procesor with processor. ld/ PR binutils/27445 * testsuite/ld-i386/property-x86-isa1.d: Replace procesor with processor. * testsuite/ld-x86-64/property-x86-isa1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa1.d: Likewise.
2021-02-19Wrong ELF class plugin vs. gcc ld versionAlan Modra1-72/+72
When building 32-bit binutils with CC="gcc -m32" CXX="g++ -m32" we can fail the gcc ld version test due to an error attempting to load a 64-bit plugin into 32-bit ld-new. This results in bogus errors about "Your compiler driver ignores -B when choosing ld." * testsuite/lib/ld-lib.exp: Whitespace. (load_common_lib): Expand single use and delete this proc. (run_host_cmd): Use -fno-lto when getting gcc's ld version. Use -B for clang too.
2021-02-14ld testsuite: change unresolved to unsupported/failAlan Modra42-209/+174
"unresolved" as a test result means runtest returns an error, which can be confusing when there is no apparent error unless you look in .log files. In particular many tests are skipped without reporting an error if no target C compiler is found, but if a target C compiler is found but won't compile a testcase for some reason we used to mark the test as unresolved. Which is no more worthy of an error than when lacking a C compiler entirely. * testsuite/ld-cdtest/cdtest.exp, * testsuite/ld-checks/checks.exp, * testsuite/ld-elf/binutils.exp, * testsuite/ld-elf/compress.exp, * testsuite/ld-elf/dwarf.exp, * testsuite/ld-elf/exclude.exp, * testsuite/ld-elf/frame.exp, * testsuite/ld-elf/indirect.exp, * testsuite/ld-elf/linux-x86.exp, * testsuite/ld-elf/sec-to-seg.exp, * testsuite/ld-elf/tls_common.exp, * testsuite/ld-elfcomm/elfcomm.exp, * testsuite/ld-elfvers/vers.exp, * testsuite/ld-elfvsb/elfvsb.exp, * testsuite/ld-elfweak/elfweak.exp, * testsuite/ld-ifunc/binutils.exp, * testsuite/ld-mips-elf/mips-elf-flags.exp, * testsuite/ld-misc/defsym.exp, * testsuite/ld-mn10300/mn10300.exp, * testsuite/ld-plugin/lto.exp, * testsuite/ld-plugin/plugin.exp, * testsuite/ld-scripts/align.exp, * testsuite/ld-scripts/assert.exp, * testsuite/ld-scripts/crossref.exp, * testsuite/ld-scripts/defined.exp, * testsuite/ld-scripts/extern.exp, * testsuite/ld-scripts/log2.exp, * testsuite/ld-scripts/map-address.exp, * testsuite/ld-scripts/phdrs.exp, * testsuite/ld-scripts/phdrs2.exp, * testsuite/ld-scripts/script.exp, * testsuite/ld-scripts/section-flags.exp, * testsuite/ld-scripts/sizeof.exp, * testsuite/ld-scripts/weak.exp, * testsuite/ld-selective/selective.exp, * testsuite/ld-sh/sh.exp, * testsuite/ld-shared/shared.exp, * testsuite/ld-srec/srec.exp, * testsuite/ld-tic6x/tic6x.exp, * testsuite/ld-undefined/undefined.exp, * testsuite/ld-undefined/weak-undef.exp, * testsuite/lib/ld-lib.exp: Don't use unresolved except after perror. Instead report "unsupported" or "fail".
2021-02-12Change the readelf and objdump programs so that they will automatically ↵Nick Clifton1-2/+2
follow links to separate debug info files. * configure.ac (follow-debug-links): Add option to enable or disable the following of debug links by default. Set the default for the option to be 'follow'. * dwarf.c (do_follow_links): Initialise with DEFAULT_FOR_FOLLOW_LINKS. (dwarf_select_sections_by_names): Add no-follow-links option. (dwarf_select_sections_by_letter): Add 'N' option. * objdump.c (usage): Add conditional text describing the follow links option. (slurp_symtab): Ensure that there is a NULL entry at the end of the symbol table. (slurp_dynamic_symtab): Likewise. (dump_bfd): When extending the symbol table, ensure that there is still a NULL entry at the end. * readelf.c (usage): Add conditional text describing the follow links option. * doc/binutils.texi: Update documentation for objcopy and readelf. * doc/debug.options.texi: Update documentation of the follow-links option. * config.in: Regenerate. * configure: Regenerate. * testsuite/binutils-all/compress.exp: Add the -WN option to objdump command lines that are not expecting to follow links. * testsuite/binutils-all/readelf.exp: Add the --debug-dump=no-follow-links option to tests that are not expecting to follow debug links. gas * testsuite/gas/mach-o/sections-1.d: Stop automatic debug link following. * testsuite/gas/xgate/insns-dwarf2.d: Likewise. ld * testsuite/ld-elf/sec64k.exp: Stop readelf from automatically following debug links.
2021-02-09Remove arm-symbianelfAlan Modra3-25/+0
* configure.ac: Delete arm*-*-symbianelf* entry. * configure: Regenerate. bfd/ * config.bfd (arm*-*-symbianelf*): Move from obsolete to removed. * configure.ac: Delete symbian entries. * elf-bfd.h (enum elf_target_os): Delete is_symbian. * elf32-arm.c: Remove symbian support. Formatting. * targets.c: Delete symbian entries. * configure: Regenerate. binutils/ * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Remove symbianelf. gas/ * Makefile.am (TARG_ENV_HFILES): Remove config/te-symbian.h. * config/tc-arm.c (elf32_arm_target_format): Remove TE_SYMBIAN support. * config/te-symbian.h: Delete. * configure.tgt: Remove arm-*-symbianelf*. * testsuite/gas/arm/arch4t-eabi.d: Don't mention symbianelf in target selection. * testsuite/gas/arm/arch4t.d: Likewise. * testsuite/gas/arm/got_prel.d: Likewise. * testsuite/gas/arm/mapdir.d: Likewise. * testsuite/gas/arm/mapmisc.d: Likewise. * testsuite/gas/arm/mapsecs.d: Likewise. * testsuite/gas/arm/mapshort-eabi.d: Likewise. * testsuite/gas/arm/thumb-eabi.d: Likewise. * testsuite/gas/arm/thumb.d: Likewise. * testsuite/gas/arm/thumbrel.d: Likewise. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove earmsymbian.c. Don't include symbian dep file. * configure.tgt: Remove arm*-*-symbianelf* entry. * emulparams/armsymbian.sh: Delete. * ld.texi: Don't mention symbian. * scripttempl/armbpabi.sc: Delete. * testsuite/ld-arm/symbian-seg1.d: Delete. * testsuite/ld-arm/symbian-seg1.s: Delete. * testsuite/ld-arm/arm-elf.exp: Don't run symbian-seg1. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2021-02-07ld: Remove x86 ISA level run-time testsH.J. Lu2-126/+0
Remove x86 ISA level run-time tests since with glibc 2.33, they will fail to run on machines with lesser x86 ISA level: tmpdir/property-5-pie: CPU ISA level is lower than required PR ld/27358 * testsuite/ld-i386/i386.exp: Remove property 3/4/5 run-time tests. * testsuite/ld-x86-64/x86-64.exp: Likewise.
2021-02-04x86-64: Provide more info when failed to convert GOTPCRELH.J. Lu7-7/+7
Provide [hjl@gnu-cfl-2 ld]$ ./ld-new -z norelro -L/export/gnu/import/git/gitlab/x86-binutils/ld/testsuite/ld-x86-64 -melf32_x86_64 -Ttext=0x80000000 -o tmpdir/dump tmpdir/pr19609-7.o tmpdir/pr19609-7.o: in function `_start': (.text+0x2): failed to convert GOTPCREL relocation against 'foobar'; relink with --no-relax [hjl@gnu-cfl-2 ld]$ instead of [hjl@gnu-cfl-2 ld]$ ld -z norelro -L/export/gnu/import/git/gitlab/x86-binutils/ld/testsuite/ld-x86-64 -melf32_x86_64 -Ttext=0x80000000 -o tmpdir/dump tmpdir/pr19609-7.o ld: failed to convert GOTPCREL relocation; relink with --no-relax [hjl@gnu-cfl-2 ld]$ bfd/ PR ld/19609 * elf64-x86-64.c (elf_x86_64_relocate_section): Provide more info when failed to convert GOTPCREL relocation. ld/ PR ld/19609 * testsuite/ld-x86-64/pr19609-2a.d: Updated. * testsuite/ld-x86-64/pr19609-2b.d: Likewise. * testsuite/ld-x86-64/pr19609-4a.d: Likewise. * testsuite/ld-x86-64/pr19609-4c.d: Likewise. * testsuite/ld-x86-64/pr19609-5d.d: Likewise. * testsuite/ld-x86-64/pr19609-7a.d: Likewise. * testsuite/ld-x86-64/pr19609-7c.d: Likewise.
2021-02-04ld: Restore PR ld/15146 testsH.J. Lu6-0/+47
commit 7d409ac001cce916661d345bff01ed589991e762 Author: Alan Modra <amodra@gmail.com> Date: Thu Feb 4 13:56:34 2021 +1030 PR27311, (symbol from plugin): undefined reference, hidden sym fixed PR ld/15146. Restore PR ld/15146 tests. PR ld/15146 * testsuite/ld-plugin/lto.exp: Run PR ld/15146 tests. * testsuite/ld-plugin/pr15146.d: Restored. * testsuite/ld-plugin/pr15146a.c: Likewise. * testsuite/ld-plugin/pr15146b.c: Likewise. * testsuite/ld-plugin/pr15146c.c: Likewise. * testsuite/ld-plugin/pr15146d.c: Likewise.
2021-02-04PR27311, (symbol from plugin): undefined reference, hidden symAlan Modra2-2/+13
bfd/ PR 27311 * elflink.c (elf_link_add_object_symbols): Don't pull in as-needed libraries for IR references on pass over libraries after LTO recompilation. ld/ * testsuite/ld-plugin/pr27311d.c: New test. * testsuite/ld-plugin/lto.exp: Rename pr27311 to pr27311-1, compile and link new test as pr27311-2.
2021-02-03PR27311 again, ld.bfd (symbol from plugin): undefined referenceAlan Modra1-2/+2
bfd/ PR 27311 * elflink.c (_bfd_elf_add_default_symbol): Clear override when undecorated symbol will have a different version. ld/ * testsuite/ld-ifunc/ifunc.exp (libpr16467b.so, libpr16467bn.so): Link with --as-needed.
2021-02-02PR27311, ld.bfd (symbol from plugin): undefined referenceAlan Modra6-6/+30
A default versioned symbol definition in a shared library is overridden by an unversioned definition in a regular object file, and thus should not be reason to make an as-needed library needed. bfd/ PR 27311 * elflink.c (_bfd_elf_add_default_symbol): Add override parameter. Use when handling default versioned symbol. Rename existing override variable to nondef_override and use for non-default versioned symbol. (elf_link_add_object_symbols): Adjust call to suit. Don't pull in as-needed libraries when override is set. ld/ * testsuite/ld-plugin/pr27311.d, * testsuite/ld-plugin/pr27311.ver, * testsuite/ld-plugin/pr27311a.c, * testsuite/ld-plugin/pr27311b.c, * testsuite/ld-plugin/pr27311c.c: New testcase. * testsuite/ld-plugin/lto.exp: Run it. Correct PR14918 and PR12982 entries.
2021-02-01Re: ld: Add a test for PR ld/27259Alan Modra1-1/+1
* testsuite/ld-elf/pr27259.d: Correct sh_link match.
2021-01-29PR27271, c6x-uclinux-ld segfaults linking ld-uClibc-1.0.37.soAlan Modra1-0/+5
bfd/ PR 27271 * elflink.c (bfd_elf_link_record_dynamic_symbol): Don't segfault on symbols defined in absolute or other special sections. ld/ * testsuite/ld-tic6x/tic6x.exp: Add pr27271 test.
2021-01-28ld: Add a test for PR ld/27259H.J. Lu2-0/+21
PR ld/27259 * testsuite/ld-elf/pr27259.d: New file. * testsuite/ld-elf/pr27259.s: Likewise.
2021-01-26ld: Fix a typo in testsuite/ld-x86-64/bnd-plt-1.dH.J. Lu1-2/+2
Pass -mx86-used-note=no to assembler. * testsuite/ld-x86-64/bnd-plt-1.d: Fix a typo.
2021-01-26PR27226, ld.bfd contains huge .rodata sectionAlan Modra1-0/+1
This makes it possible to build ld without any compiled-in scripts, by setting COMPILE_IN=no in the environment. pe, beos and pdp11 targets didn't support scripts from the file system, with pdp11 nastily editing the ld/ldscripts file so that the built-in script didn't match. PR 27226 * emulparams/alphavms.sh: Don't set COMPILE_IN. * emulparams/elf64_ia64_vms.sh: Likewise. * emulparams/elf64mmix.sh: Likewise. * emulparams/elf_iamcu.sh: Likewise. * emulparams/elf_k1om.sh: Likewise. * emulparams/elf_l1om.sh: Likewise. * emulparams/mmo.sh: Likewise. * emulparams/pdp11.sh: Set DATA_SEG_ADDR. * scripttempl/pdp11.sc: Use it. * emultempl/pdp11.em: Don't edit .xn script for separate_code, instead use .xe script. Support scripts from file system. * emultempl/beos.em: Support scripts from file system. * emultempl/pe.em: Likewise. * emultempl/pep.em: Likewise. * testsuite/ld-bootstrap/bootstrap.exp: Make tmpdir/ldscripts link.
2021-01-21mips XPASS pr26936Alan Modra1-5/+3
git commit 994b25132814 "Ignore section symbols when matching linkonce with comdat" cured the reason why this test used to fail on mips. * testsuite/ld-elf/pr26936.d: No longer xfail mips.
2021-01-20PowerPC: Don't generate unused section symbolsAlan Modra17-183/+50
PowerPC version of git commit d1bcae833b. bfd/ * elf32-ppc.c: Delete outdated comment. (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): Define. * elf64-ppc.c (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): Define. gas/ * testsuite/gas/ppc/power4.d: Adjust for removal of section sym. * testsuite/gas/ppc/test1elf32.d: Likewise. * testsuite/gas/ppc/test1elf64.d: Likewise. ld/ * testsuite/ld-powerpc/relbrlt.s: Make symbols global. * testsuite/ld-powerpc/relbrlt.d: Adjust to suit. * testsuite/ld-powerpc/tlsget.d: Adjust for reordered stubs. * testsuite/ld-powerpc/tlsget.wf: Likewise. * testsuite/ld-powerpc/tlsget2.d: Likewise. * testsuite/ld-powerpc/tlsget2.wf: Likewise. * testsuite/ld-powerpc/tlsexe.r: Adjust for removed section syms. * testsuite/ld-powerpc/tlsexe32.r: Likewise. * testsuite/ld-powerpc/tlsexe32no.r: Likewise. * testsuite/ld-powerpc/tlsexeno.r: Likewise. * testsuite/ld-powerpc/tlsexenors.r: Likewise. * testsuite/ld-powerpc/tlsexers.r: Likewise. * testsuite/ld-powerpc/tlsexetoc.r: Likewise. * testsuite/ld-powerpc/tlsexetocrs.r: Likewise. * testsuite/ld-powerpc/tlsso.r: Likewise. * testsuite/ld-powerpc/tlsso32.r: Likewise. * testsuite/ld-powerpc/tlstocso.r: Likewise.
2021-01-19libctf, ld: fix data symbol test with newer GCCNick Alcock2-2/+6
GCC 11+ spots that the extern var_1 and var_666 declarations in this test are unused, and removes them, thus stopping them from appearing as conflicted data symbols and rendering the test pointless. Use them in a function unique to this TU to prevent them from being eliminated. ld/ChangeLog 2021-01-19 Nick Alcock <nick.alcock@oracle.com> * testsuite/ld-ctf/data-func-2.c: Stop removal of the extern foo_t symbols by the optimizer. * testsuite/ld-ctf/data-func-conflicted.d: Adjust accordingly.
2021-01-19ld: Just xfail riscv little endian targets for compressed1d.d test.Nelson Chu2-2/+16
The sizes of compressed and uncompressed .debug_aranges are the same for the riscv big endian targets, but different for the little endian targets. The compress rule is fine and isn't broken by riscv, just the original compressed1d.d fails by accident. Ideally, we should fill the R_RISCV_ADD/SUB relocations when disabling relaxations in the assembler. But before that, Jim already had written an alternative test compressed1d-alt to relpace compressed1d.d for riscv, so we can only xfail the riscv little endian targets in the short-term. ld/ * testsuite/ld-elf/elf.exp (riscv_little_endian): Added. Return true if target is riscv little endian. Otherwise, return false. * testsuite/ld-elf/compressed1d.d: Only xfail the riscv little endian targets by [riscv_little_endian].
2021-01-18PR26378, sections initialised only by linker scripts are always read/writeAlan Modra1-1/+1
This changes the initialisation of output sections so that it is possible to create read-only sections fed only from linker script BYTE, SHORT, LONG or QUAD. That currently isn't possible even for one of the well-known ELF sections like .rodata, because once a section is marked read/write that sticks. On the other hand if we start read-only, well-known ELF sections end up read/write as appropriate. For example .tdata will still be SHF_ALLOC + SHF_WRITE + SHF_TLS. PR 26378 * ldlang.c (map_input_to_output_sections): Start with a read-only section for data statements. * testsuite/ld-elf/size-2.d: Adjust to suit.
generated by cgit v1.1 at 2024-11-27 01:55:19 +0000