aboutsummaryrefslogtreecommitdiff
path: root/ld/testsuite/ld-srec
AgeCommit message (Collapse)AuthorFilesLines
2013-05-02 * archures.c: Add some more MSP430 machine numbers.Nick Clifton1-2/+6
* config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2012-08-13Add support for 64-bit ARM architecture: AArch64Nick Clifton1-2/+5
2012-05-26ld/Alan Modra1-5/+1
* ldlex.h (enum option_values): Move from.. * lexsup.c: ..here. * emultempl/ppc32elf.em: Include ldlex.h. (PARSE_AND_LIST_ARGS_CASES): Disable optimisations when --traditional-format. * emultempl/ppc64elf.em: Likewise. ld/testsuite/ * ld-srec/srec.exp: Remove powerpc64 flag setting.
2012-05-15 * config/tc-m68hc11.c: Add S12X and XGATE co-processor support.Nick Clifton1-0/+15
Add option to offset S12 addresses into XGATE memory space. Tweak target flags to match other tools. (i.e. -m m68hc11). * doc/as.texinfo: Mention new options. * doc/c-m68hc11.texi: Document new options. * NEWS: Mention new support. * archures.c: Add bfd_arch_m9s12x and bfd_arch_m9s12xg. * config.bfd: Likewise. * cpu-m9s12x.c: New. * cpu-m9s12xg.c: New. * elf32-m68hc12.c: Add S12X and XGATE co-processor support. Add option to offset S12 addresses into XGATE memory space. Fix carry bug in IMM16 (IMM8 low/high) relocate. * Makefile.am (ALL_MACHINES): Add cpu-m9s12x and cpu-m9s12xg. (ALL_MACHINES_CFILES): Likewise. * reloc.c: Add S12X relocs. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * gas/m68hc11/insns9s12x.s: New * gas/m68hc11/insns9s12x.d: New * gas/m68hc11/hexprefix.s: New * gas/m68hc11/hexprefix.d: New * gas/m68hc11/9s12x-exg-sex-tfr.s: New * gas/m68hc11/9s12x-exg-sex-tfr.d: New * gas/m68hc11/insns9s12xg.s: New * gas/m68hc11/insns9s12xg.d: New * gas/m68hc11/9s12x-mov.s: New * gas/m68hc11/9s12x-mov.d: New * gas/m68hc11/m68hc11.exp: Updated * gas/m68hc11/*.d: Brought in line with changed objdump output. * gas/all/gas.exp: XFAIL all hc11/12 targets for redef2,3. * gas/elf/elf.exp: XFAIL all hc11/12 targets for redef. * gas/elf/dwarf2-1.d: Skip for hc11/12 targets. * gas/elf/dwarf2-2.d: Likewise. * ld-m68hc11/xgate-link.s: New. * ld-m68hc11/xgate-link.d: New. * ld-m68hc11/xgate-offset.s: New. * ld-m68hc11/xgate-offset.d: New. * ld-m68hc11/xgate1.s: New. * ld-m68hc11/xgate1.d: New. * ld-m68hc11/xgate2.s: New. * ld-m68hc11/m68hc11.exp: Updated. * ld-m68hc11/*.d: Brought in line with changed objdump output. * ld-gc/gc.exp: Update CFLAGS for m68hc11. * ld-plugin/plugin.exp: Likewise. * ld-srec/srec.exp: XFAIL for m68hc11 and m68hc12. * configure.in: Add S12X and XGATE co-processor support to m68hc11 target. * disassemble.c: Likewise. * configure: Regenerate. * m68hc11-dis.c: Make objdump output more consistent, use hex instead of decimal and use 0x prefix for hex. * m68hc11-opc.c: Add S12X and XGATE opcodes. * dis-asm.h (print_insn_m9s12x): Prototype. (print_insn_m9s12xg): Prototype. * m68hc11.h (R_M68HC12_16B, R_M68HC12_PCREL_9, R_M68HC12_PCREL_10) R_M68HC12_HI8XG, R_M68HC12_LO8XG): New relocations. (E_M68HC11_XGATE_RAMOFFSET): Define. * m68hc11.h: Add XGate definitions. (struct m68hc11_opcode): Add xg_mask field.
2011-10-25bfd:Nick Clifton1-0/+6
* Makefile.am (ALL_MACHINES): Add cpu-epiphany.lo . (ALL_MACHINES_CFILES): Add cpu-epiphany.c . (BFD32_BACKENDS): Add elf32-epiphany.lo . (BFD32_BACKENDS_CFILES): Add elf32-epiphany.c . * Makefile.in, bfd-in2.h, configure, libbfd.h: Regenerate. * archures.c (bfd_arch_epiphany): Add. (bfd_mach_epiphany16, bfd_mach_epiphany32): Define. (bfd_epiphany_arch): Declare. (bfd_archures_list): Add &bfd_epiphany_arch. * config.bfd (epiphany-*-elf): New target case. * configure.in (bfd_elf32_epiphany_vec): New target vector case. * reloc.c (BFD_RELOC_EPIPHANY_SIMM8): New relocation. (BFD_RELOC_EPIPHANY_SIMM24, BFD_RELOC_EPIPHANY_HIGH): Likewise. (BFD_RELOC_EPIPHANY_LOW, BFD_RELOC_EPIPHANY_SIMM11): Likewise. (BFD_RELOC_EPIPHANY_IMM11, BFD_RELOC_EPIPHANY_IMM8): Likewise. * targets.c (bfd_elf32_epiphany_vec): Declare. (_bfd_target_vector): Add bfd_elf32_epiphany_vec. * po/SRC-POTFILES.in, po/bfd.pot: Regenerate. * cpu-epiphany.c, elf32-epiphany.c: New files. binutils: * readelf.c (include "elf/epiphany.h") (guess_is_rela, dump_relocation): Handle EM_ADAPTEVA_EPIPHANY. (get_machine_name, is_32bit_abs_reloc, is_32bit_pcrel_reloc): Likewise. (is_16bit_abs_reloc, is_none_reloc): Likewise. * po/binutils.pot: Regenerate. cpu: * cpu/epiphany.cpu, cpu/epiphany.opc: New files. gas: * NEWS: Mention addition of Adapteva Epiphany support. * config/tc-epiphany.c, config/tc-epiphany.h: New files. * Makefile.am (TARGET_CPU_CFILES): Add config/tc-epiphany.c . (TARGET_CPU_HFILES): Add config/tc-epiphany.h . * Makefile.in, configure, doc/Makefile.in, po/POTFILES.in: Regenerate. * configure.in: Also set using_cgen for epiphany. * configure.tgt: Handle epiphany. * doc/Makefile.am (CPU_DOCS): Add c-epiphany.texi . * doc/all.texi: Set EPIPHANY. * doc/as.texinfo: Add EPIPHANY-specific text. * doc/c-epiphany.texi: New file. * po/gas.pot: Regenerate. gas/testsuite: * gas/epiphany: New directory. include: * dis-asm.h (print_insn_epiphany): Declare. * elf/epiphany.h: New file. * elf/common.h (EM_ADAPTEVA_EPIPHANY): Define. ld: * NEWS: Mention addition of Adapteva Epiphany support. * Makefile.am (ALL_EMULATION_SOURCES): Add eelf32epiphany.c . (eelf32epiphany.c): New rule. * Makefile.in: Regenerate. * configure.tgt: Handle epiphany-*-elf. * po/ld.pot: Regenerate. * testsuite/ld-srec/srec.exp: xfail epiphany. * emulparams/elf32epiphany.sh: New file. opcodes: * Makefile.am (HFILES): Add epiphany-desc.h and epiphany-opc.h . (TARGET_LIBOPCODES_CFILES): Add epiphany-asm.c, epiphany-desc.c, epiphany-dis.c, epiphany-ibld.c and epiphany-opc.c . (CLEANFILES): Add stamp-epiphany. (EPIPHANY_DEPS): Set. Make CGEN-generated Epiphany files depend on it. (stamp-epiphany): New rule. * Makefile.in, configure, po/POTFILES.in, po/opcodes.pot: Regenerate. * configure.in: Handle bfd_epiphany_arch. * disassemble.c (ARCH_epiphany): Define. (disassembler): Handle bfd_arch_epiphany. * epiphany-asm.c, epiphany-desc.c, epiphany-desc.h: New files. * epiphany-dis.c, epiphany-ibld.c, epiphany-opc.c: Likewise. * epiphany-opc.h: Likewise.
2011-06-13 * Makefile.am (ALL_MACHINES): Add cpu-tilegx.lo and cpu-tilepro.lo.Nick Clifton1-0/+8
(ALL_MACHINE_CFILES): Add cpu-tilegx.c and cpu-tilepro.c. (BFD32_BACKENDS): Add elf32-tilegx.lo, elf32-tilepro.lo, and elfxx-tilegx.lo. (BFD32_BACKENDS_CFILES): Add elf32-tilegx.c elf32-tilepro.c, and elfxx-tilegx.c. (BFD64_BACKENDS): Add elf64-tilegx.lo. (BFD64_BACKENDS_CFILES): Add elf64-tilegx.c. * Makefile.in: Regenerate. * arctures.c (bfd_architecture): Define bfd_arch_tilepro, bfd_arch_tilegx, bfd_mach_tilepro, bfd_mach_tilegx. (bfd_arch_info): Add bfd_tilegx_arch, bfd_tilepro_arch. (bfd_archures_list): Add bfd_tilegx_arch, bfd_tilepro_arch. bfd-in2.h: Regenerate. * config.bfd: Handle tilegx-*-* and tilepro-*-*. * configure.in: Handle bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec, and bfd_elf64_tilegx_vec. * configure: Regenerate. * elf-bfd.h (enum elf_target_id): Define TILEGX_ELF_DATA and TILEPRO_ELF_DATA. * libbfd.h: Regenerate. * reloc.c: Add BFD_RELOC_TILEPRO_{COPY, GLOB_DAT, JMP_SLOT, RELATIVE, BROFF_X1, JOFFLONG_X1, JOFFLONG_X1_PLT, IMM8_X0, IMM8_Y0, IMM8_X1, IMM8_Y1, DEST_IMM8_X1, MT_IMM15_X1, MF_IMM15_X1, IMM16_X0, IMM16_X1, IMM16_X0_LO, IMM16_X1_LO, IMM16_X0_HI, IMM16_X1_HI, IMM16_X0_HA, IMM16_X1_HA, IMM16_X0_PCREL, IMM16_X1_PCREL, IMM16_X0_LO_PCREL, IMM16_X1_LO_PCREL, IMM16_X0_HI_PCREL, IMM16_X1_HI_PCREL, IMM16_X0_HA_PCREL, IMM16_X1_HA_PCREL, IMM16_X0_GOT, IMM16_X1_GOT, IMM16_X0_GOT_LO, IMM16_X1_GOT_LO, IMM16_X0_GOT_HI, IMM16_X1_GOT_HI, IMM16_X0_GOT_HA, IMM16_X1_GOT_HA, MMSTART_X0, MMEND_X0, MMSTART_X1, MMEND_X1, SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1, IMM16_X0_TLS_GD, IMM16_X1_TLS_GD, IMM16_X0_TLS_GD_LO, IMM16_X1_TLS_GD_LO, IMM16_X0_TLS_GD_HI, IMM16_X1_TLS_GD_HI, IMM16_X0_TLS_GD_HA, IMM16_X1_TLS_GD_HA, IMM16_X0_TLS_IE, IMM16_X1_TLS_IE, IMM16_X0_TLS_IE_LO, IMM16_X1_TLS_IE_LO, IMM16_X0_TLS_IE_HI, IMM16_X1_TLS_IE_HI, IMM16_X0_TLS_IE_HA, IMM16_X1_TLS_IE_HA, TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32} Add BFD_RELOC_TILEGX_{HW0, HW1, HW2, HW3, HW0_LAST, HW1_LAST, HW2_LAST, COPY, GLOB_DAT, JMP_SLOT, RELATIVE, BROFF_X1, JUMPOFF_X1, JUMPOFF_X1_PLT, IMM8_X0, IMM8_Y0, IMM8_X1, IMM8_Y1, DEST_IMM8_X1, MT_IMM14_X1, MF_IMM14_X1, MMSTART_X0, MMEND_X0, SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1, IMM16_X0_HW0, IMM16_X1_HW0, IMM16_X0_HW1, IMM16_X1_HW1, IMM16_X0_HW2, IMM16_X1_HW2, IMM16_X0_HW3, IMM16_X1_HW3, IMM16_X0_HW0_LAST, IMM16_X1_HW0_LAST, IMM16_X0_HW1_LAST, IMM16_X1_HW1_LAST, IMM16_X0_HW2_LAST, IMM16_X1_HW2_LAST, IMM16_X0_HW0_PCREL, IMM16_X1_HW0_PCREL, IMM16_X0_HW1_PCREL, IMM16_X1_HW1_PCREL, IMM16_X0_HW2_PCREL, IMM16_X1_HW2_PCREL, IMM16_X0_HW3_PCREL, IMM16_X1_HW3_PCREL, IMM16_X0_HW0_LAST_PCREL, IMM16_X1_HW0_LAST_PCREL, IMM16_X0_HW1_LAST_PCREL, IMM16_X1_HW1_LAST_PCREL, IMM16_X0_HW2_LAST_PCREL, IMM16_X1_HW2_LAST_PCREL, IMM16_X0_HW0_GOT, IMM16_X1_HW0_GOT, IMM16_X0_HW1_GOT, IMM16_X1_HW1_GOT, IMM16_X0_HW2_GOT, IMM16_X1_HW2_GOT, IMM16_X0_HW3_GOT, IMM16_X1_HW3_GOT, IMM16_X0_HW0_LAST_GOT, IMM16_X1_HW0_LAST_GOT, IMM16_X0_HW1_LAST_GOT, IMM16_X1_HW1_LAST_GOT, IMM16_X0_HW2_LAST_GOT, IMM16_X1_HW2_LAST_GOT, IMM16_X0_HW0_TLS_GD, IMM16_X1_HW0_TLS_GD, IMM16_X0_HW1_TLS_GD, IMM16_X1_HW1_TLS_GD, IMM16_X0_HW2_TLS_GD, IMM16_X1_HW2_TLS_GD, IMM16_X0_HW3_TLS_GD, IMM16_X1_HW3_TLS_GD, IMM16_X0_HW0_LAST_TLS_GD, IMM16_X1_HW0_LAST_TLS_GD, IMM16_X0_HW1_LAST_TLS_GD, IMM16_X1_HW1_LAST_TLS_GD, IMM16_X0_HW2_LAST_TLS_GD, IMM16_X1_HW2_LAST_TLS_GD, IMM16_X0_HW0_TLS_IE, IMM16_X1_HW0_TLS_IE, IMM16_X0_HW1_TLS_IE, IMM16_X1_HW1_TLS_IE, IMM16_X0_HW2_TLS_IE, IMM16_X1_HW2_TLS_IE, IMM16_X0_HW3_TLS_IE, IMM16_X1_HW3_TLS_IE, IMM16_X0_HW0_LAST_TLS_IE, IMM16_X1_HW0_LAST_TLS_IE, IMM16_X0_HW1_LAST_TLS_IE, IMM16_X1_HW1_LAST_TLS_IE, IMM16_X0_HW2_LAST_TLS_IE, IMM16_X1_HW2_LAST_TLS_IE, TLS_DTPMOD64, TLS_DTPOFF64, TLS_TPOFF64, TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32} * targets.c (bfd_elf32_tilegx_vec): Declare. (bfd_elf32_tilepro_vec): Declare. (bfd_elf64_tilegx_vec): Declare. (bfd_target_vector): Add bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec, and bfd_elf64_tilegx_vec. * cpu-tilegx.c: New file. * cpu-tilepro.c: New file. * elf32-tilepro.h: New file. * elf32-tilepro.c: New file. * elf32-tilegx.c: New file. * elf32-tilegx.h: New file. * elf64-tilegx.c: New file. * elf64-tilegx.h: New file. * elfxx-tilegx.c: New file. * elfxx-tilegx.h: New file. * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and config/tc-tilepro.c. (TARGET_CPU_HFILES): Add config/tc-tilegx.h and config/tc-tilepro.h. * Makefile.in: Regenerate. * configure.tgt (tilepro-*-*): New. (tilegx-*-*): Likewise. * config/tc-tilegx.c: New file. * config/tc-tilegx.h: Likewise. * config/tc-tilepro.h: Likewise. * config/tc-tilepro.c: Likewise. * doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and c-tilepro.texi. * doc/Makefile.in: Regenerate. * doc/all.texi (TILEGX): Define. (TILEPRO): Define. * doc/as.texinfo: Add Tile-Gx and TILEPro documentation. Include c-tilegx.texi and c-tilepro.texi. * doc/c-tilegx.texi: New. * doc/c-tilepro.texi: New. * gas/tilepro/t_constants.s: New file. * gas/tilepro/t_constants.d: Likewise. * gas/tilepro/t_insns.s: Likewise. * gas/tilepro/tilepro.exp: Likewise. * gas/tilepro/t_insns.d: Likewise. * gas/tilegx/tilegx.exp: Likewise. * gas/tilegx/t_insns.d: Likewise. * gas/tilegx/t_insns.s: Likewise. * dis-asm.h (print_insn_tilegx): Declare. (print_insn_tilepro): Likewise. * tilegx.h: New file. * tilepro.h: New file. * common.h: Add EM_TILEGX. * tilegx.h: New file. * tilepro.h: New file. * Makefile.am (ALL_EMULATION_SOURCES): Add eelf32tilegx.c and eelf32tilepro.c. (ALL_64_EMULATION_SOURCES): Add eelf64tilegx.c. (eelf32tilegx.c): New target. (eelf32tilepro.c): Likewise. (eelf64tilegx.c): Likewise. * Makefile.in: Regenerate. * configure.tgt: Handle tilegx-*-* and tilepro-*-*. * emulparams/elf32tilegx.sh: New file. * emulparams/elf64tilegx.sh: New file. * emulparams/elf32tilepro.sh: New file. * ld-elf/eh5.d: Don't run on tile*. * ld-srec/srec.exp: xfail on tile*. * ld-tilegx/external.s: New file. * ld-tilegx/reloc.d: New file. * ld-tilegx/reloc.s: New file. * ld-tilegx/tilegx.exp: New file. * ld-tilepro/external.s: New file. * ld-tilepro/reloc.d: New file. * ld-tilepro/reloc.s: New file. * ld-tilepro/tilepro.exp: New file. * Makefile.am (TARGET_LIBOPCODES_CFILES): Add tilegx-dis.c, tilegx-opc.c, tilepro-dis.c, and tilepro-opc.c. * Makefile.in: Regenerate. * configure.in: Handle bfd_tilegx_arch and bfd_tilepro_arch. * configure: Regenerate. * disassemble.c (disassembler): Add ARCH_tilegx and ARCH_tilepro. * po/POTFILES.in: Regenerate. * tilegx-dis.c: New file. * tilegx-opc.c: New file. * tilepro-dis.c: New file. * tilepro-opc.c: New file.
2011-04-06bfd:Joseph Myers1-15/+3
* config.bfd (thumb-*-oabi): Don't handle in list of obsolete targets. (strongarm*, thumb*, xscale*): Remove architectures. (strongarm-*-kaos*, thumb-*-coff, thumb-*-elf, thumb-epoc-pe*, thumb-*-pe*, strongarm-*-elf, strongarm-*-coff, xscale-*-elf, xscale-*-coff): Remove targets. binutils: * configure.in (thumb-*-pe*): Remove. * configure: Regenerate. binutils/testsuite: * binutils-all/objcopy.exp (*arm*-*-coff): Change to arm*-*-coff. (xscale-*-coff, thumb*-*-coff, thumb*-*-pe): Don't handle. gas: * configure.tgt (strongarm*be, strongarm*b, strongarm*, xscale*be|xscale*b, xscale*): Remove architectures. (thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe, thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets. gas/testsuite: * gas/all/gas.exp (*arm*-*-coff): Change to arm*-*-coff. (thumb*-*-coff, thumb*-*-pe*): Don;t handle. * gas/arm/arm.exp (*arm*-*-*): Change to arm*-*-*. (*xscale*-*-*): Don't handle. * gas/cfi/cfi.exp (xscale*-*): Don't handle. * gas/elf/elf.exp (*arm*-*-*): Change to arm*-*-*. (xscale*-*-*): Don't handle. ld: * configure.tgt (thumb-*-linux-* | thumb-*-uclinux*, strongarm-*-coff, strongarm-*-elf, strongarm-*-kaos*, thumb-*-coff, thumb-*-elf, thumb-epoc-pe, thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets. ld/testsuite: * ld-selective/selective.exp (xscale-*-*): Don't handle. * ld-srec/srec.exp (strongarm*-*-*, xscale*-*-*, thumb-*-*): Don't handle. (*arm*-*-*): Change to arm*-*-*. (strongarm*-*-coff, xscale*-*-coff, thumb-*-coff*, thumb-*-pe*, thumb-*-elf*, strongarm*-*-*, thumb-*-*): Remove xfails. * ld-undefined/undefined.exp (thumb*-*-pe*, thumb*-*-pe*): Remove commented-out xfails. (thumb-elf): Remove reference in comment. * lib/ld-lib.exp (strongarm*-*-*, xscale*-*-*, thumb-*-*): Don't handle.
2011-02-09 * ld-elfvsb/elfvsb.exp: Don't run any non-PIC tests on powerpc*-linux.Alan Modra1-0/+4
* ld-gc/gc.exp: Ensure powerpc64 test continues to fail. * ld-srec/srec.exp: Don't edit toc on powerpc64.
2009-10-01 * lib/ld-lib.exp (ld_simple_link_defsyms): New proc, addingAlan Modra1-32/+4
powerpc-*-rtems to code setting symbols, extracted from.. * ld-srec/srec.exp (run_srec_test): ..here. Correct flags for sh64. * ld-gc/gc.exp (test_gc): Use ld_simple_link_defsyms.
2009-09-23 * ld-srec/srec.exp: Add xfails for bfin-*-linux-uclibc.Jie Zhang1-0/+4
2009-09-02update copyright datesAlan Modra1-1/+1
2009-01-29 * config/tc-mep.h (DIFF_EXPR_OK): Do not define.Nick Clifton1-3/+4
* gas/all/gas.exp: Expect forward test to fail for MeP. Expect relax test to fail for MeP. * gas/mep/relocs.d: Update expected disassembly. * lib/ld-lib.exp (check_gc_sections_available): Add MeP to list of targets which do not support garbage collection. * ld-srec/srec.exp (run_srec_test): Expect tests to fail for MeP. * ld-elf/group8a.d: Likewise. * ld-elf/group8b.d: Likewise. * ld-elf/group9a.d: Likewise. * ld-elf/group9b.d: Likewise. * binutils-all/objdump.W: Do not assume that high and low PC addresses will have been computed.
2007-10-12 * ld-srec/srec.exp: Define __stack_chk_fail sym.Alan Modra1-2/+3
2007-08-28bfd:Joseph Myers1-5/+4
2007-08-28 Mark Shinwell <shinwell@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * elf32-arm.c (elf32_arm_compare_mapping): Compare first on vma, then on type. binutils/testsuite: 2007-08-28 Mark Shinwell <shinwell@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * binutils-all/ar.exp (long_filenames): Delete temporary files on the host. * binutils-all/arm/objdump.exp: Only check "which $OBJDUMP" if host is local. * binutils-all/objcopy.exp: Use ${srecfile} to get the name of the srec file to be passed to binutils_run. (objcopy_test_readelf): Use remote_exec. * binutils-all/readelf.exp (readelf_find_size): Use remote_exec. (readelf_test): Likewise. (readelf_wi_test): Likewise. * lib/utils-lib.exp (run_dump_test): Only check "which $binary" if host is local. Use remote_exec. Use $tempfile not tmpdir/bintest.o. gas: 2007-08-28 Mark Shinwell <shinwell@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * as.c (main): Flush stderr before printing listings to ensure consistent output order across platforms. gas/testsuite: 2007-08-28 Mark Shinwell <shinwell@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * lib/gas-defs.exp (gas_version): Use remote_* functions instead of exec. (gas_host_run): New. (gas_run): Use gas_host_run. (gas_start): Likewise. (run_dump_test): Likewise. (objdump): Use gas_host_run. (objdump_start_no_subdir): Likewise. * lib/gas-dg.exp (gas-dg-test): Use "remote_file host delete". * lib/run: Remove. * gas/macros/macros.exp: Download app4b.s to host. * gas/i386/i386.exp (gas_64_check): Use gas_host_run. (gas_32_check): Likewise. * gas/maxq10/maxq10.exp (gas_64_check): Likewise (gas_32_check): Likewise. * gas/maxq20/maxq20.exp (gas_64_check): Likewise (gas_32_check): Likewise. * gas/sparc/sparc.exp (gas_64_check): Likewise. * gas/cfi/cfi.exp: Likewise. * gas/elf/elf.exp (run_list_test): Likewise. Use temporary file for readelf output in place of pipe. * gas/all/gas.exp: Download incbin.dat to host. (do_comment): Allow \r\r\n. ld: 2007-08-28 Mark Shinwell <shinwell@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * ldlang.c (sort_sections_by_lma): Sort by internal id after lma for stable sort. ld/testsuite: 2007-08-28 Mark Shinwell <shinwell@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * ld-elfcomm/elfcomm.exp: Use run_host_cmd. Only check "which $CC" if host is local. * ld-checks/checks.exp: Use run_host_cmd. * ld-elf/exclude.exp: Likewise. * ld-elf/elf.exp: Download merge.ld if host is remote. * ld-elf/binutils.exp (binutils_test): Use remote_exec. * ld-elf/tls_common.exp: Use run_host_cmd. * lib/ld-lib.exp (ld_version): Only check "which $ld" if host is local. Use remote_exec. (run_host_cmd): New. (run_host_cmd_yesno): New. (default_ld_relocate): Use run_host_cmd_yesno. (default_ld_link): Likewise. (default_ld_simple_link): Use run_host_cmd. (default_ld_compile): Only check "which $ccprog" if host is local. Use remote_file and remote_exec. (default_ld_assemble): Only check "which $as" if host is local. Use run_host_cmd. (default_ld_nm): Use remote_exec, remote_upload and remote_file. (run_dump_test): Use remote_exec, remote_upload and remote_file. Only check "which $binary" if host is local. (run_ld_link_tests): Use remote_exec, remote_upload and remote_file. * ld-selective/selective.exp: Only check "which $CXX" if host is local. Use remote_exec. * ld-scripts/phdrs.exp: Only check "which $objdump" if host is local. Use run_host_cmd. * ld-scripts/phdrs2.exp: Likewise. * ld-scripts/weak.exp: Likewise. * ld-undefined/weak-undef.exp: Likewise. * ld-scripts/crossref.exp: Only check "which $CC" if host is local. Use run_host_cmd. * ld-scripts/map-address.exp: Upload map_address.map if host is remote. * ld-srec/srec.exp (run_srec_tests): Use run_host_cmd. Only check "which $CC" and "which $CXX" if host is local. * ld-undefined/undefined.exp: Only check "which $CC" if host is local. Use remote_file and run_host_cmd. * config/default.exp: Use remote_exec to create tmpdir.
2007-08-16 * ld-srec/srec.exp: Always pass "-G 0". Remove all powerpcAlan Modra1-7/+3
xfails.
2007-08-03 * ld-srec/srec.exp: XFAIL for powerpc*-*-*.Daniel Jacobowitz1-2/+3
2007-07-06Update sources to GPLv3Nick Clifton1-6/+9
2006-09-16Add support for Score target.Nick Clifton1-1/+3
2006-05-022006-05-02 H.J. Lu <hongjiu.lu@intel.com>H.J. Lu1-2/+2
* ld-cdtest/cdtest-foo.cc (Foo::Foo): Add const to char *. * ld-cdtest/cdtest-foo.h (Foo::Foo): Likewise. * ld-srec/sr3.cc (Foo::Foo): Likewise.
2005-08-18Remove a29k support.Alan Modra1-7/+0
2005-05-05Replace linux-gnu with linux-* to allow for versions of Linux which do not useNick Clifton1-3/+3
glibc.
2005-04-26* ld-srec/srec.exp (run_srec_test): Deal with ProPolice onMark Kettenis1-1/+8
*-*-openbsd*.
2005-03-03update copyright datesAlan Modra1-1/+1
2003-12-30 * ld-srec/srec.exp (run_srec_test): Remove -fgnu-linker, since GCCMark Mitchell1-1/+1
3.4 does not support it.
2003-07-23 * ld-srec/srec.exp: For m6811/m6812 use --defsym to define _.z softStephane Carrez1-1/+1
register.
2003-07-222003-07-22 H.J. Lu <hongjiu.lu@intel.com>H.J. Lu1-0/+4
* ld-selective/selective.exp: Skip "ia64-*-*". * ld-srec/srec.exp: Make xfail on "ia64-*-*".
2003-06-11 * ld-srec/srec.exp (run_srec_test): Remove powerpc64 xfails, andAlan Modra1-4/+0
xfail for hppa duplicated elsewhere.
2003-04-01Add Xtensa portNick Clifton1-0/+5
2003-01-20 * ld-srec/srec.exp (run_srec_test): Pass --traditional-format to ld.Alan Modra1-2/+3
2002-12-03Fix the merging of .PPC.EMB.apuinfo sections. Add a test to make sure thatNick Clifton1-1/+1
the fix continues to work.
2002-06-032005-06-02 H.J. Lu <hjl@gnu.org>H.J. Lu1-0/+9
* ld-srec/sr3.cc (__dso_handle): Added for gcc 3.1 with -fuse-cxa-atexit. (__cxa_atexit): Likewise.
2002-02-08Contribute sh64-elf.Alexandre Oliva1-0/+8
2002-02-02 Alexandre Oliva <aoliva@redhat.com> * ld-sh/sh64/crange3-cmpct.rd: Adjust offsets. * ld-sh/sh64/crange3-media.rd: Likewise. * ld-sh/sh64/crange3.rd: Likewise. * ld-sh/sh64/crangerel1.rd: Likewise. * ld-sh/sh64/crangerel2.rd: Likewise. * ld-sh/sh64/reldl32.rd: Likewise. * ld-sh/sh64/reldl64.rd: Likewise. 2002-01-28 Alexandre Oliva <aoliva@redhat.com> * ld-sh/sh64/abi32.xd: Formatting changes to match the current output of objdump. * ld-sh/sh64/cmpct1.xd: Likewise. * ld-sh/sh64/crange1.rd: Likewise. * ld-sh/sh64/crange2.rd: Likewise. * ld-sh/sh64/crange3-cmpct.rd: Likewise. * ld-sh/sh64/crange3-media.rd: Likewise. * ld-sh/sh64/crange3.rd: Likewise. * ld-sh/sh64/crangerel1.rd: Likewise. * ld-sh/sh64/crangerel2.rd: Likewise. * ld-sh/sh64/mix1.xd: Likewise. * ld-sh/sh64/mix2.xd: Likewise. * ld-sh/sh64/rel32.xd: Likewise. * ld-sh/sh64/reldl32.rd: Likewise. * ld-sh/sh64/reldl64.rd: Likewise. * ld-sh/sh64/sh64.exp: Likewise. Reordered cranges and stack sessions, to match changes in the linker script. 2001-06-14 Alexandre Oliva <aoliva@redhat.com> * ld-sh/sh64/reldl32.rd, ld-sh/sh64/reldl64.rd: Adjust relocation info to reflect renumbering of relocation types. 2001-03-14 DJ Delorie <dj@redhat.com> * ld-sh/sh64/endian.dbd: New file, endian tests. * ld-sh/sh64/endian.dld: Ditto. * ld-sh/sh64/endian.ld: Ditto. * ld-sh/sh64/endian.s: Ditto. * ld-sh/sh64/endian.sbd: Ditto. * ld-sh/sh64/endian.sld: Ditto. * ld-sh/sh64/sh64.exp: Add above tests. Add -L option to ld. 2001-03-12 DJ Delorie <dj@redhat.com> * ld-sh/sh64/relax.exp: New file, test disabling relaxing. * ld-sh/sh64/relax1.s: Ditto. * ld-sh/sh64/relax2.s: Ditto. * ld-sh/sh64/relax3.s: Ditto. * ld-sh/sh64/relax4.s: Ditto. * ld-sh/sh64/relfail.exp: New file, test for bogus relocs. * ld-sh/sh64/relfail.s: Ditto. 2001-03-12 DJ Delorie <dj@redhat.com> * ld-sh/sh.exp: This test isn't appropriate for SH64 since it uses SH32 assembler files. 2001-03-07 DJ Delorie <dj@redhat.com> * ld-selective/selective.exp: Pass "-e _start" for sh64 to accomodate expected start symbol in test. 2001-03-06 DJ Delorie <dj@redhat.com> * ld-scripts/crossref.exp: Pass -mshelf32 to the linker for sh64, to match what gcc passes to the linker by default. * ld-selective/selective.exp: Ditto. * ld-srec/srec.exp: Ditto, plus XFAIL for sh64. * ld-undefined/undefined.exp: Add XFAIL for sh64 (it's dwarf2). 2001-03-06 DJ Delorie <dj@redhat.com> * ld-sh/sh64/abi32.xd (stack): Adjust for new default stack layout. * ld-sh/sh64/abi64.xd (stack): Ditto. * ld-sh/sh64/cmpct1.xd (stack): Ditto. * ld-sh/sh64/crange1.rd (stack): Ditto. * ld-sh/sh64/crange2.rd (stack): Ditto. * ld-sh/sh64/crange3-cmpct.rd (stack): Ditto. * ld-sh/sh64/crange3-media.rd (stack): Ditto. * ld-sh/sh64/crange3.rd (stack): Ditto. * ld-sh/sh64/mix1.xd (stack): Ditto. * ld-sh/sh64/mix2.xd (stack): Ditto. * ld-sh/sh64/shdl32.xd (stack): Ditto. * ld-sh/sh64/shdl64.xd (stack): Ditto. 2001-01-14 Hans-Peter Nilsson <hpn@cygnus.com> * ld-sh/sh64/mix1.xd: Add SORT_ENTRIES for .cranges section. * ld-sh/sh64/mix2.xd: Ditto. 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com> * ld-sh/sh64/abi32.xd: Adjust for bit 0 set on an entry address being SHmedia. * ld-sh/sh64/shdl64.xd: Ditto. * ld-sh/sh64/shdl32.xd: Ditto. * ld-sh/sh64/mix2.xd: Ditto. * ld-sh/sh64/crange3-media.rd: Ditto. * ld-sh/sh64/abi64.xd: Ditto. 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com> * ld-sh/sh64/crange-2a.s (diversion2): New global symbol. * ld-sh/sh64/crange1.rd: Adjust to presence of new symbol. Adjust section type for .cranges; expect sorted contents. * ld-sh/sh64/crange2.rd: Ditto. * ld-sh/sh64/crange3.dd, ld-sh/sh64/crange3.rd: Ditto. * ld-sh/sh64/crangerel1.rd: Adjust to presence of new symbol. * ld-sh/sh64/crangerel2.rd: Ditto. * ld-sh/sh64/mix1.xd: Adjust to DEBUGGING being set for .cranges. * ld-sh/sh64/mix2.xd: Ditto. * ld-sh/sh64/crange3-cmpct.rd, ld-sh/sh64/crange3-media.rd: New tests. * ld-sh/sh64/sh64.exp: Tweak test message. Run new tests. 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com> * ld-sh/sh64/shmix-1.s (start2): Add a NOP to provide a valid target for (unexpanded) PTB. Add an .align 2 to SHmedia code to keep properly aligned. * ld-sh/sh64/mix1.sd, ld-sh/sh64/mix1.xd: Adjust accordingly. * ld-sh/sh64/mix1-noexp.sd, ld-sh/sh64/mix2-noexp.sd, ld-sh/sh64/abixx-noexp.sd: New tests for GAS -no-expand and R_SH_PT_16 relocation. * ld-sh/sh64/sh64.exp: Run new tests. 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com> * ld-sh/sh64/crange-2f.s, ld-sh/sh64/crange-2g.s, ld-sh/sh64/crange-2h.s, ld-sh/sh64/crange-2i.s, ld-sh/sh64/crange3.dd, ld-sh/sh64/crange3.rd: New tests. * ld-sh/sh64/sh64.exp: Run new tests. * ld-sh/sh64/crange1.rd: Correct section flags. * ld-sh/sh64/crange2.rd: Ditto. * ld-sh/sh64/crangerel1.rd: Ditto. 2000-12-18 Hans-Peter Nilsson <hpn@cygnus.com> * ld-sh/sh64/crange-1.s, ld-sh/sh64/crange-2a.s, ld-sh/sh64/crange-2b.s, ld-sh/sh64/crange-2c.s, ld-sh/sh64/crange-2d.s, ld-sh/sh64/crange-2e.s, ld-sh/sh64/crange1.rd, ld-sh/sh64/crange2.rd, ld-sh/sh64/crangerel1.rd, ld-sh/sh64/crangerel2.rd: New tests for handling .cranges section. * ld-sh/sh64/sh64.exp: Run new tests. * ld-sh/sh64/mix1.sd, ld-sh/sh64/mix1.xd, ld-sh/sh64/mix2.sd, ld-sh/sh64/mix2.xd: Adjust for .cranges section. 2000-12-15 Hans-Peter Nilsson <hpn@cygnus.com> * ld-sh/sh64/abi32.sd, ld-sh/sh64/abi32.xd, ld-sh/sh64/abi64.sd, ld-sh/sh64/abi64.xd, ld-sh/sh64/cmpct1.xd, ld-sh/sh64/mix1.sd, ld-sh/sh64/mix1.xd, ld-sh/sh64/mix2.sd, ld-sh/sh64/mix2.xd, ld-sh/sh64/shdl32.xd, ld-sh/sh64/shdl64.xd: Adjust to .bss and .data individually 8-byte aligned. 2000-12-09 Hans-Peter Nilsson <hpn@cygnus.com> * ld-sh/sh64/rel-1.s, ld-sh/sh64/rel-2.s, ld-sh/sh64/rel32.xd, ld-sh/sh64/rel64.xd, ld-sh/sh64/reldl-1.s, ld-sh/sh64/reldl-2.s, ld-sh/sh64/reldl32.rd, ld-sh/sh64/reldl64.rd: New tests. * ld-sh/sh64/sh64.exp: Make it possible to use readelf as inspection tool. Run new tests. 2000-12-07 Hans-Peter Nilsson <hpn@cygnus.com> * ld-sh/sh64/abi64.sd, ld-sh/sh64/abi32.sd, ld-sh/sh64/mix1.sd, ld-sh/sh64/mix2.sd: Correct offsets in PT/PTA/PTB expansions. * ld-sh/sh64/shdl-1.s, ld-sh/sh64/shdl-2.s, ld-sh/sh64/shdl64.sd, ld-sh/sh64/shdl64.xd, ld-sh/sh64/shdl32.xd: New tests. * ld-sh/sh64/sh64.exp: Run new tests. 2000-12-01 Hans-Peter Nilsson <hpn@cygnus.com> * ld-sh/sh64/cmpct1.sd, ld-sh/sh64/cmpct1.xd, ld-sh/sh64/shcmp-1.s: New test. * ld-sh/sh64/sh64.exp: Add new test to sh64tests. Reformat. 2000-11-30 Hans-Peter Nilsson <hpn@cygnus.com> * ld-sh/sh64/sh64.exp: Use linker option -mshelf64 for 64-bit ABI test. * ld-sh/sh64/abi64.xd: Tweak for 64-bit ELF. 2000-11-29 Hans-Peter Nilsson <hpn@cygnus.com> * ld-sh/sh64/sh64.exp (sh64tests): Use linker option -mshelf32 for tests. 2000-11-27 Hans-Peter Nilsson <hpn@cygnus.com> * ld-sh/sh64/abi32.sd, ld-sh/sh64/abi64.sd: Correct MOVI registers. * ld-sh/sh64/mix1.sd, ld-sh/sh64/mix1.xd, ld-sh/sh64/shmix-1.s: New test. * ld-sh/sh64/mix2.sd, ld-sh/sh64/mix2.xd, ld-sh/sh64/shmix-2.s, ld-sh/sh64/shmix-3.s: New test. * ld-sh/sh64/sh64.exp: Add new tests to sh64tests. 2000-11-26 Hans-Peter Nilsson <hpn@cygnus.com> * ld-sh/sh64: New testsuite.
2001-08-27 * ld-checks/checks.exp: .lcomm is incompatible with ppc coff.Alan Modra1-0/+3
* ld-scripts/cross1.t: Add .toc section. * ld-scripts/cross2.t: Likewise. * ld-scripts/phdrs.exp: powerpc64 is 64 bit. * ld-srec/srec.exp: xfail powerpc64
2001-08-01Do not require any exception support library.Nick Clifton1-1/+1
2001-06-062001-06-06 H.J. Lu <hjl@gnu.org>H.J. Lu1-2/+2
* ld-bootstrap/bootstrap.exp: Rebuild tmpdir/ld2 with tmpdir/ld3 on Linux/mips. * ld-elfvers/vers.exp: Also run on istarget Linux/mips. * ld-elfvsb/elfvsb.exp: Likewise. * ld-shared/shared.exp: Likewise. * ld-selective/selective.exp: Mark selective2, selective3, selective4 and selective5 xfail on Linux/mips. * ld-shared/main.c: Skip invalid -Bsymbolic tests on Linux/mips. * symbolic.dat: Remove invalid -Bsymbolic tests on Linux/mips. * ld-srec/srec.exp: Add Linux/mips to xfail.
2001-03-13Fixtypos in ChangeLogs, fix copyright dates in filesNick Clifton1-1/+16
2001-02-08 * ld-srec/srec.exp (run_srec_test): m6811 code has referencesStephane Carrez1-0/+7
to soft registers, define them with --defsym. * ld-selective/selective.exp: Likewise.
2000-12-31Fix problems with new EXACTLY_TWO_DASHES command line switch option.Nick Clifton1-2/+2
2000-12-09Expect the srec_test to fail for ARM targets because the -oformat linkerNick Clifton1-12/+14
command switch cannot be used.
2000-07-10Even more hppa testsuite patches.Alan Modra1-0/+4
2000-01-22To satisfy latest CVS gcc:Alan Modra1-0/+5
* emultempl/*.em (ld_emulation_xfer_struct): Add missing NULL initialisers, and comments. * testsuite/ld-srec/sr3.cc (__rethrow): New.
1999-10-28Fix testsuite failures for arm -linuxNick Clifton1-5/+6
1999-07-221999-07-21 H.J. Lu <hjl@gnu.org>Ian Lance Taylor1-1/+1
* ld-elfvers/vers1.c: Add missing prototypes and include <stdio.h> if necessary. * ld-elfvers/vers15.c: Likewise. * ld-elfvers/vers19.c: Likewise. * ld-elfvers/vers2.c: Likewise. * ld-elfvers/vers3.c: Likewise. * ld-elfvers/vers4.c: Likewise. * ld-elfvers/vers6.c: Likewise. * ld-elfvers/vers7.c: Likewise. * ld-elfvers/vers9.c: Likewise. * ld-shared/main.c: Likewise. * ld-srec/sr3.cc (Foo::Foo): Remove arg name.
1999-05-11* ld-srec/srec.exp: Do not run tests for PE based ports.DJ Delorie1-0/+6
1999-05-0319990502 sourceware importbinu_ss_19990502Richard Henderson4-0/+530
generated by cgit v1.1 at 2024-12-26 07:47:26 +0000