aboutsummaryrefslogtreecommitdiff
path: root/ld/testsuite/ld-powerpc
AgeCommit message (Collapse)AuthorFilesLines
2020-01-01Update year range in copyright notice of binutils filesAlan Modra3-3/+3
2019-10-09PowerPC local got testAlan Modra3-0/+14
This is the one that causes ld segfaults between 2019-10-04 and 2019-10-07. Bug introduced with f749f26eea, fixed by 93370e8e7b. * testsuite/ld-powerpc/localgot.s, * testsuite/ld-powerpc/localgot.d: New test. * testsuite/ld-powerpc/powerpc.exp: Run it.
2019-10-07PowerPC TLS testsAlan Modra19-1/+715
This patch adds some --no-tls-optimize tests and performs some of the existing dynamic tests with tls markers in order to catch any regression in PLT counting. * testsuite/ld-powerpc/tlsexe.r: Adjust for added TLSMARK symbol. * testsuite/ld-powerpc/tlsexe32.r: Likewise. * testsuite/ld-powerpc/tlsso.r: Likewise. * testsuite/ld-powerpc/tlsso32.r: Likewise. * testsuite/ld-powerpc/tls32no.d, * testsuite/ld-powerpc/tls32no.g: New test files. * testsuite/ld-powerpc/tlsexe32no.d, * testsuite/ld-powerpc/tlsexe32no.g, * testsuite/ld-powerpc/tlsexe32no.r: New test files. * testsuite/ld-powerpc/tlsexeno.d, * testsuite/ld-powerpc/tlsexeno.g, * testsuite/ld-powerpc/tlsexeno.r: New test files. * testsuite/ld-powerpc/tlsexetocno.d, * testsuite/ld-powerpc/tlsexetocno.g: New test files. * testsuite/ld-powerpc/tlsno.d, * testsuite/ld-powerpc/tlsno.g: New test files. * testsuite/ld-powerpc/tlstocno.d, * testsuite/ld-powerpc/tlstocno.g: New test files. * testsuite/ld-powerpc/powerpc.exp: Run new tests.
2019-10-04PowerPC PIC vs. DLL TLS issuesAlan Modra6-21/+28
1) GOT entries generated for any of the GOT TLS relocations don't need dynamic relocations for locally defined symbols in PIEs. In the case of a tls_index doubleword, the dtpmod entry is known to be 1, and the dtprel entry is also known at link time and relative. Similarly, dtprel and tprel words are known at link time and relative. (GOT entries for other than TLS symbols are not relative and thus need dynamic relocations in PIEs.) 2) Local dynamic TLS code is really only meant for accesses local to the current binary. There was a cheapskate test for this before using the common tlsld_got slot, but the test wasn't exactly correct and might confuse anyone looking at the code. The proper test, SYMBOL_REFERENCES_LOCAL isn't so expensive that it should be avoided. 3) The same cheap test for local syms when optimising TLS sequences should be SYMBOL_REFERENCES_LOCAL too. bfd/ * elf64-ppc.c (ppc64_elf_check_relocs): Move initialisation of vars. (ppc64_elf_tls_optimize): Correct is_local condition. (allocate_got): Don't reserve dynamic relocations for any of the tls got relocs in PIEs when the symbol is local. (allocate_dynrelocs): Correct validity test for local sym using tlsld_got slot. (ppc64_elf_size_dynamic_sections): Don't reserve dynamic relocations for any of the tls got relocs in PIEs. (ppc64_elf_layout_multitoc): Likewise. (ppc64_elf_relocate_section): Correct validity test for local sym using tlsld_got slot. Don't emit dynamic relocations for any of the tls got relocs in PIEs when the symbol is local. * elf32-ppc.c (ppc_elf_tls_optimize): Correct is_local condition. (got_relocs_needed): Delete. (allocate_dynrelocs): Correct validity test for local sym using tlsld_got slot. Don't reserve dynamic relocations for any of the tls got relocs in PIEs when the symbol is local. (ppc_elf_size_dynamic_sections): Don't reserve dynamic relocations for any of the tls got relocs in PIEs. (ppc_elf_relocate_section): Correct validity test for local sym using tlsld_got slot. Don't emit dynamic relocations for any of the tls got relocs in PIEs when the symbol is local. ld/ * testsuite/ld-powerpc/tlsso.d: Adjust to suit tlsld_got usage change. * testsuite/ld-powerpc/tlsso.g: Likewise. * testsuite/ld-powerpc/tlsso.r: Likewise. * testsuite/ld-powerpc/tlsso32.d: Likewise. * testsuite/ld-powerpc/tlsso32.g: Likewise. * testsuite/ld-powerpc/tlsso32.r: Likewise.
2019-09-05R_PPC64_PCREL_OPTAlan Modra2-5/+24
The loads and stores handled in the second instruction of a sequence marked by R_PPC64_PCREL_OPT may be a prefix instruction. For example: pld ra,symbol@got@pcrel 0: pld rt,off(ra) .reloc 0b-8,R_PPC64_PCREL_OPT,(.-8)-(0b-8) can be optimised to pld rt,symbol+off@pcrel pnop * elf64-ppc.c (xlate_pcrel_opt): Handle prefix loads and stores in second instruction. (ppc64_elf_relocate_section): Likewise.
2019-08-02PowerPC tlsie test fixAlan Modra1-2/+2
* testsuite/ld-powerpc/tlsie.s: Correct medium model ELF sequence.
2019-07-19[PowerPC64] pc-relative TLS relocationsAlan Modra7-0/+311
This patch supports using pcrel instructions in TLS code sequences. A number of new relocations are needed, gas operand modifiers to generate those relocations, and new TLS optimisation. For optimisation it turns out that the new pcrel GD and LD sequences can be distinguished from the non-pcrel GD and LD sequences by there being different relocations on the new sequence. The final "add ra,rb,13" on IE sequences similarly needs a new relocation, or as I chose, a modification of R_PPC64_TLS. On pcrel IE code, the R_PPC64_TLS points one byte into the "add" instruction rather than being on the instruction boundary. GD: pla 3,z@got@tlsgd@pcrel # R_PPC64_GOT_TLSGD34 bl __tls_get_addr@notoc(z@tlsgd) # R_PPC64_TLSGD and R_PPC64_REL24_NOTOC edited to IE pld 3,z@got@tprel@pcrel add 3,3,13 edited to LE paddi 3,13,z@tprel nop LD: pla 3,z@got@tlsld@pcrel # R_PPC64_GOT_TLSLD34 bl __tls_get_addr@notoc(z@tlsld) # R_PPC64_TLSLD and R_PPC64_REL24_NOTOC .. paddi 9,3,z2@dtprel pld 10,z3@got@dtprel@pcrel add 10,10,3 edited to LE paddi 3,13,0x1000 nop IE: pld 9,z@got@tprel@pcrel # R_PPC64_GOT_TPREL34 add 3,9,z@tls@pcrel # R_PPC64_TLS at insn+1 ldx 4,9,z@tls@pcrel lwax 5,9,z@tls@pcrel stdx 5,9,z@tls@pcrel edited to LE paddi 9,13,z@tprel nop ld 4,0(9) lwa 5,0(9) std 5,0(9) LE: paddi 10,13,z@tprel include/ * elf/ppc64.h (R_PPC64_TPREL34, R_PPC64_DTPREL34), (R_PPC64_GOT_TLSGD34, R_PPC64_GOT_TLSLD34), (R_PPC64_GOT_TPREL34, R_PPC64_GOT_DTPREL34): Define. (IS_PPC64_TLS_RELOC): Include new tls relocs. bfd/ * reloc.c (BFD_RELOC_PPC64_TPREL34, BFD_RELOC_PPC64_DTPREL34), (BFD_RELOC_PPC64_GOT_TLSGD34, BFD_RELOC_PPC64_GOT_TLSLD34), (BFD_RELOC_PPC64_GOT_TPREL34, BFD_RELOC_PPC64_GOT_DTPREL34), (BFD_RELOC_PPC64_TLS_PCREL): New pcrel tls relocs. * elf64-ppc.c (ppc64_elf_howto_raw): Add howtos for pcrel tls relocs. (ppc64_elf_reloc_type_lookup): Translate pcrel tls relocs. (must_be_dyn_reloc, dec_dynrel_count): Add R_PPC64_TPREL64. (ppc64_elf_check_relocs): Support pcrel tls relocs. (ppc64_elf_tls_optimize, ppc64_elf_relocate_section): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Map "tls@pcrel", "got@tlsgd@pcrel", "got@tlsld@pcrel", "got@tprel@pcrel", and "got@dtprel@pcrel". (fixup_size, md_assemble): Handle pcrel tls relocs. (ppc_force_relocation, ppc_fix_adjustable): Likewise. (md_apply_fix, tc_gen_reloc): Likewise. ld/ * testsuite/ld-powerpc/tlsgd.d, * testsuite/ld-powerpc/tlsgd.s, * testsuite/ld-powerpc/tlsie.d, * testsuite/ld-powerpc/tlsie.s, * testsuite/ld-powerpc/tlsld.d, * testsuite/ld-powerpc/tlsld.s: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.
2019-07-19[PowerPC] Rename testcaseAlan Modra5-4/+4
Just making room for a new tlsld test. * testsuite/ld-powerpc/tlsldopt.d: Rename from tlsld.d. * testsuite/ld-powerpc/tlsldopt.s: Rename from tlsld.s. * testsuite/ld-powerpc/tlsldopt32.d: Rename from tlsld32.d. * testsuite/ld-powerpc/tlsldopt32.s: Rename from tlsld32.s. * testsuite/ld-powerpc/powerpc.exp: Update.
2019-07-13Dynamic TLS section symbolsAlan Modra4-10/+9
It is possible to create shared libraries on PowerPC using -ftls-model=inital-exec or -ftls-model=local-exec. The first is half reasonable, getting you a shared library that can't be dlopen'd but otherwise is reasonable. The second is quite bad. Not only do you lose being able to dlopen, the library also has dynamic text relocations. Worse, the TPREL16_LO, TPREL16_HA and other TPREL16 dynamic relocs emitted were wrong, resulting in wrong values being applied by ld.so. Using the first TLS section symbol in dynamic relocations for local TLS symbols doesn't work. It's wrong because TLS symbols used by TLS relocs have values relative to the TLS segment, whereas the TLS section symbols are addresses. This patch instead uses a symbol index of zero which is used elsewhere by PowerPC on dynamic TLS relocs. It's not strictly ABI compliant to use a non-TLS symbol with TLS relocs but symbol index zero can be interpreted as "no symbol". Not using the first TLS section symbol means it doesn't need to be dynamic. The patch also fixes a further problem with PowerPC32 dynamic TPREL16* relocs, which shouldn't have the symbol value in the addend as we do for non-TLS symbols. bfd/ * elflink.c (_bfd_elf_omit_section_dynsym_default): Don't keep tls_sec. (_bfd_elf_init_1_index_section): Prefer not using TLS sections. (_bfd_elf_init_2_index_sections): Likewise. * elf64-ppc.c (ppc64_elf_relocate_section): When emitting dynamic relocations for local TLS symbols, use STN_UNDEF as the relocation symbol. * elf32-ppc.c (ppc_elf_relocate_section): Likewise, and don't leave TLS symbol value in the addend. ld/ * testsuite/ld-powerpc/tlsso.r: Update. * testsuite/ld-powerpc/tlsso32.g: Update. * testsuite/ld-powerpc/tlsso32.r: Update. * testsuite/ld-powerpc/tlstocso.r: Update. * testsuite/ld-cris/tls-dso-dtpoffd2.d: Update. * testsuite/ld-cris/tls-dso-dtpoffd4.d: Update. * testsuite/ld-cris/tls-dso-tpoffgotcomm1.d: Update. * testsuite/ld-cris/tls-gd-1.d: Update. * testsuite/ld-cris/tls-gd-1h.d: Update. * testsuite/ld-cris/tls-gd-2.d: Update. * testsuite/ld-cris/tls-gd-2h.d: Update. * testsuite/ld-cris/tls-ie-10.d: Update. * testsuite/ld-cris/tls-ie-11.d: Update. * testsuite/ld-cris/tls-ie-8.d: Update. * testsuite/ld-cris/tls-ie-9.d: Update. * testsuite/ld-cris/tls-js1.d: Update. * testsuite/ld-cris/tls-ld-4.d: Update. * testsuite/ld-cris/tls-ld-5.d: Update. * testsuite/ld-cris/tls-ld-6.d: Update. * testsuite/ld-cris/tls-ld-7.d: Update. * testsuite/ld-cris/tls-ldgd-14.d: Update. * testsuite/ld-cris/tls-ldgd-15.d: Update. * testsuite/ld-cris/tls-ldgdx-14.d: Update. * testsuite/ld-cris/tls-ldgdx-15.d: Update. * testsuite/ld-cris/tls-local-54.d: Update. * testsuite/ld-cris/tls-local-60.d: Update. * testsuite/ld-cris/tls-local-61.d: Update. * testsuite/ld-cris/tls-local-63.d: Update. * testsuite/ld-cris/tls-local-64.d: Update. * testsuite/ld-cris/tls-ok-30.d: Update. * testsuite/ld-cris/tls-ok-32.d: Update. * testsuite/ld-cris/tls-ok-34.d: Update. * testsuite/ld-mips-elf/tls-multi-got-1.got: Update. * testsuite/ld-mips-elf/tls-multi-got-1.r: Update. * testsuite/ld-mips-elf/tlsdyn-pie-o32.d: Update. * testsuite/ld-mips-elf/tlsdyn-pie-o32.got: Update. * testsuite/ld-mips-elf/tlslib-o32-hidden.got: Update. * testsuite/ld-mips-elf/tlslib-o32-ver.got: Update. * testsuite/ld-mips-elf/tlslib-o32.got: Update. * testsuite/ld-s390/tlspic.rd: Update. * testsuite/ld-s390/tlspic_64.rd: Update. * testsuite/ld-sparc/tlssunnopic32.rd: Update. * testsuite/ld-sparc/tlssunnopic64.rd: Update. * testsuite/ld-sparc/tlssunpic32.rd: Update. * testsuite/ld-sparc/tlssunpic64.rd: Update.
2019-07-08Re: PowerPC notoc call stub testsAlan Modra2-2/+2
Correct the tests for powerpc 32-bit targets. * testsuite/ld-powerpc/callstub-1.d: Pass -melf64ppc to ld. * testsuite/ld-powerpc/callstub-2.d: Likewise.
2019-06-28PowerPC notoc call stub testsAlan Modra5-0/+83
* testsuite/ld-powerpc/callstub-1.d, * testsuite/ld-powerpc/callstub-1.s: New test. * testsuite/ld-powerpc/callstub-2.d, * testsuite/ld-powerpc/callstub-2.s: New test. * testsuite/ld-powerpc/powerpc.exp: Run them.
2019-06-23PR24704, Internal error building skiboot for powerpc64-linux-gnuAlan Modra2-7/+7
While the skiboot linker script bears some culpability in this PR, it's also true that the GOT indirect to GOT relative optimisation for 16-bit offsets isn't safe. At least, it isn't safe to remove the GOT entry based on distance between the GOT pointer and symbol calculated from the preliminary layout. So this patch removes that optimisation, and reduces the range allowed for 32-bit and 34-bit offsets. PR 24704 bfd/ * elf64-ppc.c (R_PPC64_GOT16_DS): Don't set has_gotrel. (ppc64_elf_edit_toc): Don't remove R_PPC64_GOT16_DS got entries. Reduce range of offsets allowed for other GOT relocs. ld/ * testsuite/ld-powerpc/elfv2exe.d: Update. * testsuite/ld-powerpc/elfv2so.d: Update.
2019-05-24PowerPC notoc linkage stubsAlan Modra3-0/+44
Use pcrel addressing instructions in linkage stubs. bfd/ * elf64-ppc.c: Comment on powerxx _notoc stub variants. (LI_R11_0, LIS_R11, ORI_R11_R11_0, SLDI_R11_R11_34): Define. (PADDI_R12_PC, PLD_R12_PC, D34, HA34): Define. (struct ppc_link_hash_table): Add powerxx_stubs. (ppc64_elf_check_relocs): Set powerxx_stubs. (build_powerxx_offset, size_powerxx_offset), (num_relocs_for_powerxx_offset), (emit_relocs_for_powerxx_offset): New functions. (plt_stub_size): Size powerxx stubs. (ppc_build_one_stub): Emit powerxx stubs. (ppc_size_one_stub): Size powerxx stubs. Omit .eh_frame for powerxx stubs. ld/ * testsuite/ld-powerpc/notoc2.d, * testsuite/ld-powerpc/notoc2.s: New test. * testsuite/ld-powerpc/powerpc.exp: Run it.
2019-05-24PowerPC GOT_PCREL34 optimisationAlan Modra4-0/+218
bfd/ * elf64-ppc.c (ppc64_elf_check_relocs): Set has_gotrel for R_PPC64_GOT_PCREL34. (xlate_pcrel_opt): New function. (ppc64_elf_edit_toc): Handle R_PPC64_GOT_PCREL34. (ppc64_elf_relocate_section): Edit GOT indirect to GOT relative for R_PPC64_GOT_PCREL34. Implement R_PPC64_PCREL_OPT optimisation. ld/ * testsuite/ld-powerpc/pcrelopt.s, * testsuite/ld-powerpc/pcrelopt.d, * testsuite/ld-powerpc/pcrelopt.sec: New test. * testsuite/ld-powerpc/powerpc.exp: Run it.
2019-04-30PowerPC64 GOT indirect to GOT relative optimisationAlan Modra10-37/+34
This implements an optimisation that converts sequences like addis r9,r2,sym@got@ha ld r3,sym@got@l(r9) to addis r9,r2,sym@toc@ha addi r3,r9,sym@toc@l when "sym" is locally defined and can't be overridden. bfd/ * elf64-ppc.c (struct ppc64_elf_obj_tdata): Add has_gotrel. (struct _ppc64_elf_section_data): Likewise. (ppc64_elf_check_relocs): Set above fields. (ppc64_elf_edit_toc): Add a pass over GOT relocs. (ppc64_elf_relocate_section): Edit GOT indirect to GOT relative when possible. ld/ * testsuite/ld-powerpc/elfv2exe.d: Update. * testsuite/ld-powerpc/elfv2so.d: Update. * testsuite/ld-powerpc/tocopt.d: Update. * testsuite/ld-powerpc/tocopt.s: Update. * testsuite/ld-powerpc/tocopt5.d: Update. * testsuite/ld-powerpc/tocopt5.s: Update. * testsuite/ld-powerpc/tocopt7.d: Update. * testsuite/ld-powerpc/tocopt7.s: Update. * testsuite/ld-powerpc/tocopt8.d: Update. * testsuite/ld-powerpc/tocopt8.s: Update.
2019-04-05PowerPC disassembler: Don't emit trailing spacesAlan Modra3-3/+3
When an instruction has operands, the PowerPC disassembler prints spaces after the opcode so as to line up operands. If the operands are all optional and all default value, then no operands are printed, leaving trailing spaces. This patch fixes that. opcodes/ * ppc-dis.c (print_insn_powerpc): Delay printing spaces after opcode until first operand is output. gas/ * testsuite/gas/ppc/476.d: Remove trailing spaces. * testsuite/gas/ppc/a2.d: Likewise. * testsuite/gas/ppc/booke.d: Likewise. * testsuite/gas/ppc/booke_xcoff.d: Likewise. * testsuite/gas/ppc/e500.d: Likewise. * testsuite/gas/ppc/e500mc.d: Likewise. * testsuite/gas/ppc/e6500.d: Likewise. * testsuite/gas/ppc/htm.d: Likewise. * testsuite/gas/ppc/power6.d: Likewise. * testsuite/gas/ppc/power8.d: Likewise. * testsuite/gas/ppc/power9.d: Likewise. * testsuite/gas/ppc/vle.d: Likewise. ld/ * testsuite/ld-powerpc/tlsexe32.d: Remove trailing spaces. * testsuite/ld-powerpc/tlsopt5.d: Likewise. * testsuite/ld-powerpc/tlsopt5_32.d: Likewise.
2019-02-21PowerPC __tls_get_addr arg parsingAlan Modra1-1/+2
The syntax we ended up with for -m32 -fPIC calls to __tls_get_addr is rather weird. bl __tls_get_addr+0x8000(gd0@tlsgd)@plt This came about by accident, probably due to requiring the arg reloc before the call reloc. Of course the @plt really belongs with __tls_get_addr since it affects the call rather than the call arg, and it isn't a great deal of trouble to ensure the relocs are emitted in the correct order. This patch supports a newer syntax, like so: bl __tls_get_addr+0x8000@plt(gd0@tlsgd) gas/ * config/tc-ppc.c (parse_tls_arg): New function, extracted.. (md_assembler): ..from here. Call it after parsing other suffix modifiers too. ld/ * testsuite/ld-powerpc/tls32.s: Test new @plt syntax.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra3-3/+3
2018-11-30PR23937, powerpc64le local ifunc IRELATIVE relocs are wrongAlan Modra3-0/+76
IFUNC resolvers must always be called via their global entry point. They will be called from ld.so rather than from the local executable. PR 23937 bfd/ * elf64-ppc.c (write_plt_relocs_for_local_syms): Don't add local entry offset for ifuncs. ld/ * testsuite/ld-powerpc/pr23937.d, * testsuite/ld-powerpc/pr23937.s: New test. * testsuite/ld-powerpc/powerpc.exp: Run it.
2018-10-08Separate header PT_LOAD for -z separate-codeAlan Modra1-5/+0
This patch, along with previous patches in the series, supports putting the ELF file header and program headers in a PT_LOAD without sections. Logic governing whether headers a loaded has changed a little: The primary reason to include headers is now the presence of SIZEOF_HEADERS in a linker script. However, to support scripts that may have reserved space for headers by hand, we continue to add headers whenever the first section address is past the end of headers modulo page size. include/ * bfdlink.h (struct bfd_link_info): Add load_phdrs field. bfd/ * elf-nacl.c (nacl_modify_segment_map): Cope with header PT_LOAD lacking sections. * elf.c (_bfd_elf_map_sections_to_segments): Assume file and program headers are required when info->load_phdrs. Reorganize code handling program headers. Generate a mapping without sections just for file and program headers when -z separate-code would indicate they should be on a different page to the first section. ld/ * ldexp.c (fold_name <SIZEOF_HEADERS>): Set link_info.load_phdrs. * testsuite/ld-elf/loadaddr1.d: Pass -z noseparate-code. * testsuite/ld-elf/loadaddr2.d: Likewise. * testsuite/ld-i386/vxworks2.sd: Adjust expected output. * testsuite/ld-powerpc/vxworks2.sd: Likewise. * testsuite/ld-elf/overlay.d: Remove spu xfail. * testsuite/ld-spu/ovl.lnk: Don't use SIZEOF_HEADERS. * testsuite/ld-tic6x/dsbt-be.ld: Likewise. * testsuite/ld-tic6x/dsbt-inrange.ld: Likewise. * testsuite/ld-tic6x/dsbt-overflow.ld: Likewise. * testsuite/ld-tic6x/dsbt.ld: Likewise.
2018-08-07PowerPC64 EH info for _notoc linkage stubsAlan Modra4-9/+45
This patch generates EH info for the new _notoc linkage stubs, to support unwinding from asynchronous signal handlers. Unwinding through the __tls_get_addr_opt stub was already supported, but that was just a single stub. With multiple stubs the EH opcodes need to be emitted and sized when iterating over stubs, so this is done when emitting and sizing the stub code. Emitting the CIEs and FDEs is done when sizing the stubs, as we did before in order to have the linker generated FDEs indexed in .eh_frame_hdr. I moved the final tweaks to FDEs from ppc64_elf_finish_dynamic_sections to ppc64_elf_build_stubs simply because it's tidier to be done with them at that point. bfd/ * elf64-ppc.c (struct map_stub): Delete tls_get_addr_opt_bctrl. Add lr_restore, eh_size and eh_base. (eh_advance, eh_advance_size): New functions. (build_tls_get_addr_stub): Emit EH info for stub. (ppc_build_one_stub): Likewise for _notoc stubs. (ppc_size_one_stub): Size EH info for stub. (group_sections): Init new map_stub fields. (stub_eh_frame_size): Delete. (ppc64_elf_size_stubs): Size EH info for stubs. Set up dummy EH program for stubs. (ppc64_elf_build_stubs): Reinit new map_stub fields. Set FDE offset to stub section here.. (ppc64_elf_finish_dynamic_sections): ..rather than here. ld/ * testsuite/ld-powerpc/notoc.s: Generate some cfi. * testsuite/ld-powerpc/notoc.d: Adjust. * testsuite/ld-powerpc/notoc.wf: New file. * testsuite/ld-powerpc/powerpc.exp: Run "ext" and "notoc" tests as run_ld_link_tests rather than run_dump_test.
2018-08-05R_PPC64_REL24_NOTOC supportAlan Modra6-0/+192
R_PPC64_REL24_NOTOC is used on calls like "bl foo@notoc" to tell the linker that linkage stubs for PLT calls or long branches can't use r2 for pic addressing. Instead, new stubs that generate pc-relative addresses are used. One complication is that pc-relative offsets to the PLT may need to be 64-bit in large programs, in contrast to the toc-relative addressing used by older PLT linkage stubs where a 32-bit offset is sufficient until the PLT itself exceeds 2G in size. .eh_frame info to cover the _notoc stubs is yet to be implemented. bfd/ * elf64-ppc.c (ADDI_R12_R11, ADDI_R12_R12, LIS_R12), (ADDIS_R12_R11, ORIS_R12_R12_0, ORI_R12_R12_0), (SLDI_R12_R12_32, LDX_R12_R11_R12, ADD_R12_R11_R12): Define. (ppc64_elf_howto_raw): Add R_PPC64_REL24_NOTOC entry. (ppc64_elf_reloc_type_lookup): Support R_PPC64_REL24_NOTOC. (ppc_stub_type): Add ppc_stub_long_branch_notoc, ppc_stub_long_branch_both, ppc_stub_plt_branch_notoc, ppc_stub_plt_branch_both, ppc_stub_plt_call_notoc, and ppc_stub_plt_call_both. (is_branch_reloc): Add R_PPC64_REL24_NOTOC. (build_offset, size_offset): New functions. (plt_stub_size): Support plt_call_notoc and plt_call_both. (ppc_build_one_stub, ppc_size_one_stub): Support new stubs. (toc_adjusting_stub_needed): Handle R_PPC64_REL24_NOTOC. (ppc64_elf_size_stubs): Likewise, and new stubs. (ppc64_elf_build_stubs, ppc64_elf_relocate_section): Likewise. * reloc.c: Add BFD_RELOC_PPC64_REL24_NOTOC. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Support @notoc. (ppc_force_relocation, ppc_fix_adjustable): Handle REL24_NOTOC. ld/ * testsuite/ld-powerpc/ext.d, * testsuite/ld-powerpc/ext.s, * testsuite/ld-powerpc/ext.lnk, * testsuite/ld-powerpc/notoc.d, * testsuite/ld-powerpc/notoc.s: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.
2018-08-05Lose _r2off in powerpc64 stub namesAlan Modra2-6/+6
Not a lot is conveyed by putting _r2off in a stub symbol that can't be seen by inspecting the stub code or the toc restoring instruction immediately after a call via such a stub. Also, we don't distinguish plt_call stub symbols from plt_call_r2save stub symbols, so this patch makes long branch and plt branch stub symbols consistent with that decision. bfd/ * elf64-ppc.c (ppc_build_one_stub): Lose "_r2off" in stub symbols. ld/ * testsuite/ld-powerpc/elfv2exe.d: Adjust for stub symbol change. * testsuite/ld-powerpc/tocopt6.d: Likewise.
2018-08-01Re: PowerPC64 __tls_get_addr_opt stub .eh_frame fixAlan Modra1-1/+1
The modified test failed on some powerpc targets due to differences in default hash style. If the default hash style is both, then more sections are created, bumping section ids. Section id is used in stub symbols and although the test is careful to not depend on id in labels, the stub hash traversal order changes when stub names change. That lead to the stubs being emitted in a different order and thus not matching expected output. * testsuite/ld-powerpc/powerpc.exp: Run tlsopt5 with hash-style specified.
2018-08-01PowerPC64 __tls_get_addr_opt stub .eh_frame fixAlan Modra4-6/+22
This patch sets stub_offset in ppc_size_one_stub rather than in ppc_build_one_stub. That allows the plt stub alignment to be done in just ppc_size_one_stub rather than both functions. The patch also corrects the place where the alignment was done, fixing a possible error in .eh_frame data, and tidies some offset calculations. bfd/ * elf64-ppc.c (plt_stub_pad): Delay plt_stub_size call until needed. (ppc_build_one_stub): Don't set stub_offset, instead assert that it is sane. Don't adjust stub_offset for alignment. Adjust size calculation. Use "targ" temp when calculating offsets. (ppc_size_one_stub): Set stub_offset here. Use "targ" temp when calculating offsets. Adjust for alignment before setting tls_get_addr_opt_bctrl. ld/ * testsuite/ld-powerpc/powerpc.exp: Run tlsopt5 with plt alignment. * testsuite/ld-powerpc/tlsopt5.s: Add extra call. * testsuite/ld-powerpc/tlsopt5.wf: Adjust expected output. * testsuite/ld-powerpc/tlsopt5.d: Likewise.
2018-07-26Re: Enhance powerpc ld -r --relaxAlan Modra1-3/+2
git commit 491993044ba6 broke the powerpc vxworks testsuite. * testsuite/ld-powerpc/vxworks-relax-2.rd: Update for 2018-07-25 ppc_elf_relax_section changes.
2018-07-26Implement PowerPC64 .localentry for value 1Alan Modra3-17/+52
This adds support for ".localentry 1", a new st_other STO_PPC64_LOCAL_MASK encoding that signifies a function with a single entry point like ".localentry 0", but unlike a ".localentry 0" function does not preserve r2. include/ * elf/ppc64.h: Specify byte offset to local entry for values of two to six in STO_PPC64_LOCAL_MASK. Clarify r2 return value for such functions when entering via global entry point. Specify meaning of a value of one in STO_PPC64_LOCAL_MASK. bfd/ * elf64-ppc.c (ppc64_elf_size_stubs): Use a ppc_stub_long_branch_r2off for calls to symbols with STO_PPC64_LOCAL_MASK bits set to 1. gas/ * config/tc-ppc.c (ppc_elf_localentry): Allow .localentry values of 1 and 7 to directly set value into STO_PPC64_LOCAL_MASK bits. ld/testsuite/ * ld-powerpc/elfv2.s: Add .localentry f5,1 testcase. * ld-powerpc/elfv2exe.d: Update. * ld-powerpc/elfv2so.d: Update.
2018-07-25Enhance powerpc ld -r --relaxAlan Modra4-18/+40
One of the ill effects of ld -r is to mash together sections. That can result in reduced icache performance at runtime due to unexpected movement of code. Another problem is that sections can become too large to link on targets that have limited relative addressing. ld -r --relax attempts to overcome the large section problem for branches by inserting trampolines, but the powerpc support added lots of unnecessary trampolines. This patch trims them somewhat. bfd/ * elf32-ppc.c (ppc_elf_relax_section): Ignore common or undef locals. Avoid trashing toff with added when used as a symbol index. Ignore R_PPC_PLTREL24 addends in unused example code. Avoid creating unnecessary fixups when relocatable. ld/ * testsuite/ld-powerpc/big.s: New file. * testsuite/ld-powerpc/relaxrl.d: New test. * testsuite/ld-powerpc/powerpc.exp: Run new test. * testsuite/ld-powerpc/relaxr.d: Adjust.
2018-07-05Error for mismatched powerpc ABI tagsAlan Modra8-8/+8
And report the two input files that are incompatible rather than reporting that an input file is incompatible with the output. bfd/ * elf-bfd.h (_bfd_elf_ppc_merge_fp_attributes): Update prototype. * elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Return error on mismatch. Remove "warning: " from messages. Track last bfd used to set tags. (ppc_elf_merge_obj_attributes): Likewise. Handle status from _bfd_elf_ppc_merge_fp_attributes. * elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Handle status from _bfd_elf_ppc_merge_fp_attributes. ld/ * testsuite/ld-powerpc/attr-gnu-4-12.d: Update expected output. * testsuite/ld-powerpc/attr-gnu-4-13.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-21.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-23.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-31.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-32.d: Likewise. * testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise. * testsuite/ld-powerpc/attr-gnu-12-21.d: Likewise.
2018-06-08Define various symbols conditionally in shared librariesAlan Modra18-56/+25
The values of symbols in shared libraries like _end, _edata, and __bss_start are generally not that useful outside of the shared library. This patch defines them conditionally with PROVIDE, since a shared library might need the local value. An example is glibc ld.so local access to "_begin", "_etext" and "_end". (ld.so gains access to the local values by making the references using hidden visibility. That makes the definitions hidden too.) We can't use PROVIDE_HIDDEN in the linker scripts because the shared library might need the value of the symbol in the executable. An example is freebsd libc dynamic access to "_end". PR ld/23161 * emulparams/aarch64cloudabi.sh: PROVIDE __bss_start__, _bss_end__, and __end__ in shared libraries. * emulparams/aarch64fbsd.sh: Likewise. * emulparams/aarch64linux.sh: Likewise. * emulparams/aarch64linux32.sh: Likewise. * emulparams/armelf_fuchsia.sh: Likewise. * emulparams/armelf_linux.sh: Likewise. * emulparams/armelf_phoenix.sh: Likewise. * emulparams/aarch64elf.sh: Likewise, and __data_start * emulparams/aarch64elf32.sh: Likewise. * emulparams/armelf.sh: Likewise. * emulparams/armnto.sh: Likewise. * emulparams/elf32bmip.sh: Remove duplicate ". = ." from OTHER_GOT_SYMBOLS. PROVIDE _ftext, _fdata, and _fbss in shared libs. * emulparams/elf32bmipn32-defs.sh: Likewise. * emulparams/elf32frv.sh: PROVIDE __end and __data_start in shared libs. * emulparams/elf32lriscv-defs.sh: Tidy. * emulparams/elf32mcore.sh: PROVIDE __bss_start and _bss_end in shared libs * emulparams/elf32ppccommon.sh: PROVIDE __end in shared libs. * emulparams/elf32rl78.sh: Tidy. * emulparams/i386nto.sh: PROVIDE _btext in shared libs. * emulparams/shelf_nto.sh: Likewise. * emulparams/shlelf_nto.sh: Likewise. * emulparams/score3_elf.sh: PROVIDE _gp, _bss_start__, _bss_end__, __bss_end__, __end__, _fdata, _sdata_begin, and _bss_start in shared libs. * scripttempl/elf.sc: Don't use EXECUTABLE_SYMBOLS for shared libraries. PROVIDE _edata, edata, __bss_start, and _end in shared libraries. * testsuite/ld-elf/pr23161.map, * testsuite/ld-elf/pr23161a.c, * testsuite/ld-elf/pr23161b.c, * testsuite/ld-elf/pr23161c.c, * testsuite/ld-elf/pr23161a.rd, * testsuite/ld-elf/pr23161b.rd, * testsuite/ld-elf/pr23161c.rd, * testsuite/ld-elf/pr23161d.rd: New tests. * testsuite/ld-elf/shared.exp: Run ld/23161 tests. * testsuite/ld-elf/pr23162.rd, * testsuite/ld-aarch64/ifunc-1-local.d, * testsuite/ld-aarch64/ifunc-1.d, * testsuite/ld-aarch64/ifunc-2-local.d, * testsuite/ld-aarch64/ifunc-2.d, * testsuite/ld-aarch64/ifunc-21.d, * testsuite/ld-aarch64/ifunc-3a.d, * testsuite/ld-alpha/tlsbin.rd, * testsuite/ld-alpha/tlsbin.sd, * testsuite/ld-alpha/tlsbinr.rd, * testsuite/ld-alpha/tlspic.rd, * testsuite/ld-alpha/tlspic.sd, * testsuite/ld-cris/dso-pltdis1.d, * testsuite/ld-cris/dso-pltdis2.d, * testsuite/ld-cris/dso12-pltdis.d, * testsuite/ld-cris/gotplt1.d, * testsuite/ld-cris/gotplt2.d, * testsuite/ld-cris/gotplt3.d, * testsuite/ld-cris/hiddef1.d, * testsuite/ld-cris/libdso-1.d, * testsuite/ld-cris/libdso-10.d, * testsuite/ld-cris/libdso-11.d, * testsuite/ld-cris/libdso-12.d, * testsuite/ld-cris/libdso-12b.d, * testsuite/ld-cris/libdso-12c.d, * testsuite/ld-cris/libdso-13.d, * testsuite/ld-cris/libdso-13b.d, * testsuite/ld-cris/libdso-14.d, * testsuite/ld-cris/libdso-15.d, * testsuite/ld-cris/libdso-15b.d, * testsuite/ld-cris/libdso-1c.d, * testsuite/ld-cris/libdso-1d.d, * testsuite/ld-cris/libdso-2.d, * testsuite/ld-cris/pic-gc-72.d, * testsuite/ld-cris/pic-gc-73.d, * testsuite/ld-cris/pr16044.d, * testsuite/ld-cris/pv32-1.d, * testsuite/ld-cris/tls-dso-dtpoffd2.d, * testsuite/ld-cris/tls-dso-dtpoffd4.d, * testsuite/ld-cris/tls-dso-tpoffgotcomm1.d, * testsuite/ld-cris/tls-gc-71.d, * testsuite/ld-cris/tls-gd-1.d, * testsuite/ld-cris/tls-gd-1h.d, * testsuite/ld-cris/tls-gd-2.d, * testsuite/ld-cris/tls-gd-2h.d, * testsuite/ld-cris/tls-ie-10.d, * testsuite/ld-cris/tls-ie-11.d, * testsuite/ld-cris/tls-ie-78.d, * testsuite/ld-cris/tls-ie-8.d, * testsuite/ld-cris/tls-ie-9.d, * testsuite/ld-cris/tls-js1.d, * testsuite/ld-cris/tls-ld-4.d, * testsuite/ld-cris/tls-ld-5.d, * testsuite/ld-cris/tls-ld-6.d, * testsuite/ld-cris/tls-ld-7.d, * testsuite/ld-cris/tls-ldgd-14.d, * testsuite/ld-cris/tls-ldgd-15.d, * testsuite/ld-cris/tls-ldgdex-14.d, * testsuite/ld-cris/tls-ldgdex-15.d, * testsuite/ld-cris/tls-ldgdx-14.d, * testsuite/ld-cris/tls-ldgdx-15.d, * testsuite/ld-cris/tls-legdx-16.d, * testsuite/ld-cris/tls-legdx-17.d, * testsuite/ld-cris/tls-local-54.d, * testsuite/ld-cris/tls-local-60.d, * testsuite/ld-cris/tls-local-61.d, * testsuite/ld-cris/tls-local-63.d, * testsuite/ld-cris/tls-local-64.d, * testsuite/ld-cris/tls-ok-30.d, * testsuite/ld-cris/tls-ok-32.d, * testsuite/ld-cris/tls-ok-34.d, * testsuite/ld-cris/tls-und-38.d, * testsuite/ld-cris/tls-und-42.d, * testsuite/ld-cris/tls-und-46.d, * testsuite/ld-cris/tls-und-50.d, * testsuite/ld-cris/weakhiddso.d, * testsuite/ld-cris/weakref2.d, * testsuite/ld-frv/fdpic-shared-1.d, * testsuite/ld-frv/fdpic-shared-2.d, * testsuite/ld-frv/fdpic-shared-3.d, * testsuite/ld-frv/fdpic-shared-4.d, * testsuite/ld-frv/fdpic-shared-5.d, * testsuite/ld-frv/fdpic-shared-7.d, * testsuite/ld-frv/fdpic-shared-8.d, * testsuite/ld-frv/tls-dynamic-2.d, * testsuite/ld-i386/ibt-plt-1.d, * testsuite/ld-i386/ibt-plt-2a.d, * testsuite/ld-i386/ibt-plt-2b.d, * testsuite/ld-i386/ibt-plt-2c.d, * testsuite/ld-i386/ibt-plt-2d.d, * testsuite/ld-i386/ibt-plt-3a.d, * testsuite/ld-i386/ibt-plt-3b.d, * testsuite/ld-i386/ibt-plt-3c.d, * testsuite/ld-i386/ibt-plt-3d.d, * testsuite/ld-i386/plt2.dd, * testsuite/ld-i386/pr20830.d, * testsuite/ld-i386/tlsbin-nacl.rd, * testsuite/ld-i386/tlsbin.rd, * testsuite/ld-i386/tlsbin2-nacl.rd, * testsuite/ld-i386/tlsbin2.rd, * testsuite/ld-i386/tlsbindesc-nacl.rd, * testsuite/ld-i386/tlsbindesc.rd, * testsuite/ld-i386/tlsdesc-nacl.rd, * testsuite/ld-i386/tlsdesc.rd, * testsuite/ld-i386/tlsgdesc-nacl.rd, * testsuite/ld-i386/tlsgdesc.rd, * testsuite/ld-i386/tlsnopic-nacl.rd, * testsuite/ld-i386/tlsnopic.dd, * testsuite/ld-i386/tlsnopic.rd, * testsuite/ld-i386/tlsnopic.sd, * testsuite/ld-i386/tlspic-nacl.rd, * testsuite/ld-i386/tlspic.rd, * testsuite/ld-i386/tlspic2-nacl.rd, * testsuite/ld-i386/tlspic2.rd, * testsuite/ld-ia64/merge1.d, * testsuite/ld-ia64/merge2.d, * testsuite/ld-ia64/merge3.d, * testsuite/ld-ia64/merge4.d, * testsuite/ld-ia64/merge5.d, * testsuite/ld-ia64/tlsbin.rd, * testsuite/ld-ia64/tlspic.rd, * testsuite/ld-ifunc/ifunc-2-i386-now.d, * testsuite/ld-ifunc/ifunc-2-local-i386-now.d, * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d, * testsuite/ld-ifunc/ifunc-2-local-x86-64.d, * testsuite/ld-ifunc/ifunc-2-x86-64-now.d, * testsuite/ld-ifunc/ifunc-2-x86-64.d, * testsuite/ld-ifunc/pr17154-i386-now.d, * testsuite/ld-ifunc/pr17154-i386.d, * testsuite/ld-ifunc/pr17154-x86-64-now.d, * testsuite/ld-ifunc/pr17154-x86-64.d, * testsuite/ld-m68k/tls-def-1.d, * testsuite/ld-m68k/tls-gd-1.d2, * testsuite/ld-metag/shared.d, * testsuite/ld-metag/stub_pic_app.d, * testsuite/ld-mips-elf/rel32-n32.d, * testsuite/ld-mips-elf/rel32-o32.d, * testsuite/ld-mips-elf/rel64.d, * testsuite/ld-powerpc/ambiguousv1.d, * testsuite/ld-powerpc/ambiguousv1b.d, * testsuite/ld-powerpc/ambiguousv2.d, * testsuite/ld-powerpc/ambiguousv2b.d, * testsuite/ld-powerpc/tlsexe.d, * testsuite/ld-powerpc/tlsexe.r, * testsuite/ld-powerpc/tlsexe32.d, * testsuite/ld-powerpc/tlsexe32.g, * testsuite/ld-powerpc/tlsexe32.r, * testsuite/ld-powerpc/tlsexetoc.d, * testsuite/ld-powerpc/tlsexetoc.r, * testsuite/ld-powerpc/tlsso.d, * testsuite/ld-powerpc/tlsso.r, * testsuite/ld-powerpc/tlsso32.g, * testsuite/ld-powerpc/tlsso32.r, * testsuite/ld-powerpc/tlstocso.d, * testsuite/ld-powerpc/tlstocso.g, * testsuite/ld-powerpc/tlstocso.r, * testsuite/ld-s390/gotreloc_31-1.dd, * testsuite/ld-s390/tlsbin.dd, * testsuite/ld-s390/tlsbin.rd, * testsuite/ld-s390/tlsbin_64.dd, * testsuite/ld-s390/tlsbin_64.rd, * testsuite/ld-s390/tlspic.rd, * testsuite/ld-s390/tlspic_64.rd, * testsuite/ld-sh/tlsbin-2.d, * testsuite/ld-sh/tlspic-2.d, * testsuite/ld-sparc/gotop32.rd, * testsuite/ld-sparc/gotop64.rd, * testsuite/ld-sparc/tlssunbin32.rd, * testsuite/ld-sparc/tlssunbin64.rd, * testsuite/ld-sparc/tlssunnopic32.rd, * testsuite/ld-sparc/tlssunnopic64.rd, * testsuite/ld-sparc/tlssunpic32.rd, * testsuite/ld-sparc/tlssunpic64.rd, * testsuite/ld-x86-64/bnd-branch-1-now.d, * testsuite/ld-x86-64/bnd-ifunc-1-now.d, * testsuite/ld-x86-64/bnd-ifunc-2-now.d, * testsuite/ld-x86-64/bnd-ifunc-2.d, * testsuite/ld-x86-64/bnd-plt-1-now.d, * testsuite/ld-x86-64/bnd-plt-1.d, * testsuite/ld-x86-64/ibt-plt-1-x32.d, * testsuite/ld-x86-64/ibt-plt-1.d, * testsuite/ld-x86-64/ibt-plt-2a-x32.d, * testsuite/ld-x86-64/ibt-plt-2a.d, * testsuite/ld-x86-64/ibt-plt-2b-x32.d, * testsuite/ld-x86-64/ibt-plt-2b.d, * testsuite/ld-x86-64/ibt-plt-2c-x32.d, * testsuite/ld-x86-64/ibt-plt-2c.d, * testsuite/ld-x86-64/ibt-plt-2d-x32.d, * testsuite/ld-x86-64/ibt-plt-2d.d, * testsuite/ld-x86-64/ibt-plt-3a-x32.d, * testsuite/ld-x86-64/ibt-plt-3a.d, * testsuite/ld-x86-64/ibt-plt-3b-x32.d, * testsuite/ld-x86-64/ibt-plt-3b.d, * testsuite/ld-x86-64/ibt-plt-3c-x32.d, * testsuite/ld-x86-64/ibt-plt-3c.d, * testsuite/ld-x86-64/ibt-plt-3d-x32.d, * testsuite/ld-x86-64/ibt-plt-3d.d, * testsuite/ld-x86-64/ilp32-4-nacl.d, * testsuite/ld-x86-64/ilp32-4.d, * testsuite/ld-x86-64/load1c-nacl.d, * testsuite/ld-x86-64/load1c.d, * testsuite/ld-x86-64/load1d-nacl.d, * testsuite/ld-x86-64/load1d.d, * testsuite/ld-x86-64/mpx3n.dd, * testsuite/ld-x86-64/mpx4.dd, * testsuite/ld-x86-64/mpx4n.dd, * testsuite/ld-x86-64/plt2.dd, * testsuite/ld-x86-64/pr14207.d, * testsuite/ld-x86-64/pr19162.d, * testsuite/ld-x86-64/pr20253-1f.d, * testsuite/ld-x86-64/pr20253-1l.d, * testsuite/ld-x86-64/pr20830a-now.d, * testsuite/ld-x86-64/pr20830a.d, * testsuite/ld-x86-64/pr20830b-now.d, * testsuite/ld-x86-64/pr20830b.d, * testsuite/ld-x86-64/pr21038a-now.d, * testsuite/ld-x86-64/pr21038a.d, * testsuite/ld-x86-64/pr21038b-now.d, * testsuite/ld-x86-64/pr21038b.d, * testsuite/ld-x86-64/pr21038c-now.d, * testsuite/ld-x86-64/pr21038c.d, * testsuite/ld-x86-64/tlsbin-nacl.rd, * testsuite/ld-x86-64/tlsbin.rd, * testsuite/ld-x86-64/tlsbin2-nacl.rd, * testsuite/ld-x86-64/tlsbin2.rd, * testsuite/ld-x86-64/tlsbindesc-nacl.rd, * testsuite/ld-x86-64/tlsbindesc.rd, * testsuite/ld-x86-64/tlsdesc-nacl.rd, * testsuite/ld-x86-64/tlsdesc.rd, * testsuite/ld-x86-64/tlsgdesc-nacl.rd, * testsuite/ld-x86-64/tlsgdesc.rd, * testsuite/ld-x86-64/tlspic-nacl.rd, * testsuite/ld-x86-64/tlspic.rd, * testsuite/ld-x86-64/tlspic2-nacl.rd, * testsuite/ld-x86-64/tlspic2.rd: Update.
2018-04-16Remove netware supportAlan Modra1-1/+1
include/ * nlm/ChangeLog-9315: Delete. * nlm/alpha-ext.h: Delete. * nlm/common.h: Delete. * nlm/external.h: Delete. * nlm/i386-ext.h: Delete. * nlm/internal.h: Delete. * nlm/ppc-ext.h: Delete. * nlm/sparc32-ext.h: Delete. bfd/ * Makefile.am: Remove netware support. * bfd-in.h: Likewise. * bfd.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfdint.texi: Likewise. * ecoff.c: Likewise. * targets.c: Likewise. * libnlm.h: Delete. * nlm-target.h: Delete. * nlm.c: Delete. * nlm32-alpha.c: Delete. * nlm32-i386.c: Delete. * nlm32-ppc.c: Delete. * nlm32-sparc.c: Delete. * nlm32.c: Delete. * nlm64.c: Delete. * nlmcode.h: Delete. * nlmswap.h: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * .gitignore: Remove netware support. * Makefile.am: Likewise. * configure.ac: Likewise. * doc/Makefile.am: Likewise. * doc/binutils.texi: Likewise. * testsuite/binutils-all/nm.exp: Likewise. * nlmconv.c: Delete. * nlmconv.h: Delete. * nlmheader.y: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/ * Makefile.am: Remove netware support. * config/tc-i386.c: Likewise. * configure.tgt: Likewise. * config/te-netware.h: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gprof/ * corefile.c: Remove netware support. ld/ * Makefile.am: Remove netware support. * configure.tgt: Likewise. * testsuite/ld-powerpc/powerpc.exp: Likewise. * emulparams/i386nw.sh: Delete. * emulparams/ppcnw.sh: Delete. * scripttempl/nw.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-14powerpc common-page-sizeAlan Modra2-2/+2
max-page-size only matters for demand paged executables or shared libraries, and the ideal size is the largest value used by your operating system. Values larger than necessary just waste file space and memory. common-page-size also affects file and memory size, trading a possible small increase in file size for a decrease in memory size when the operating system is using a common-page-size page. With a powerpc max-page-size of 64k and common-page-size of 4k many executables will use no more memory pages when the system page size is 4k than an executable linked with -z max-page-size=0x1000, yet will still run on a system using 64k pages. However, when running on a system using 64k pages relro protection will not be completely effective. Due to the relro problem, powerpc binutils has been using a default common-page-size of 64k since 2014-12-18 (git commit 04c6a44c7), leading to complaints about increased file and memory sizes. People not using relro do have a valid reason to complain.. So this patch introduces an extra back-end value to use as the default for common-page-size when generating relro executables, and enables the support for powerpc. Non relro executables will now be generated with a default common-page-size of 4k. bfd/ * elf-bfd.h (struct elf_backend_data): Add relropagesize. * elfxx-target.h (ELF_RELROPAGESIZE): Provide default and sanity test. (elfNN_bed): Init relropagesize. * bfd.c (bfd_emul_get_commonpagesize): Add boolean param to select relropagesize. * elf32-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000. (ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE. (ELF_MINPAGESIZE): Don't define. * elf64-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000. (ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE. * bfd-in2.h: Regenerate. ld/ * ldmain.c (main): Move config.maxpagesize and config.commonpagesize initialization to.. * ldemul.c (after_parse_default): ..here. * testsuite/ld-powerpc/ppc476-shared.d: Pass -z common-page-size. * testsuite/ld-powerpc/ppc476-shared2.d: Likewise.
2018-04-09Support PLT16 relocs against local symbolsAlan Modra5-30/+30
Necessary if gcc is to use PLT16 relocs to implement -mlongcall, and there isn't a good technical reason why local symbols should be excluded from PLT16 support. Non-ifunc local symbol PLT entries go in a separate section to other PLT entries. In a fixed position executable they won't need to be relocated, and in a PIE or shared library I chose to not implement lazy relocation. bfd/ * elf64-ppc.c (LOCAL_PLT_ENTRY_SIZE): Define. (struct ppc_stub_hash_entry): Add symtype field. (PLT_KEEP): Define. (struct ppc_link_hash_table): Add pltlocal and relpltlocal. (create_linkage_sections): Create pltlocal and relpltlocal. (ppc64_elf_check_relocs): Allow PLT relocs on local symbols. Set PLT_KEEP. (ppc64_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls. (allocate_dynrelocs): Allocate pltlocal and relpltlocal. (ppc64_elf_size_dynamic_sections): Size pltlocal and relpltlocal. Keep PLT entries for inline calls against locals. (ppc_build_one_stub): Use pltlocal as appropriate. (ppc_size_one_stub): Likewise. (ppc64_elf_size_stubs): Set symtype. (build_global_entry_stubs_and_plt): Init pltlocal and write relpltlocal for globals. (write_plt_relocs_for_local_syms): Likewise for local syms. (ppc64_elf_relocate_section): Support PLT for local syms. * elf32-ppc.c (PLT_KEEP): Define. (struct ppc_elf_link_hash_table): Add pltlocal and relpltlocal. (ppc_elf_create_glink): Create pltlocal and relpltlocal. (ppc_elf_check_relocs): Allow PLT relocs on local symbols. Set PLT_KEEP. Adjust update_local_sym_info call. (ppc_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls. (allocate_dynrelocs): Allocate pltlocal and relpltlocal. (ppc_elf_size_dynamic_sections): Size pltlocal and relpltlocal. (ppc_elf_relocate_section): Support PLT16 relocs for local syms. (write_global_sym_plt): Init pltlocal and write relpltlocal. (ppc_finish_symbols): Likewise for locals. ld/ * emulparams/elf32ppc.sh (OTHER_RELRO_SECTIONS_2): Add .branch_lt. (OTHER_GOT_RELOC_SECTIONS): Add .rela.branch_lt. * testsuite/ld-powerpc/elfv2so.d: Update for symbol/stub reordering. * testsuite/ld-powerpc/relbrlt.d: Likewise. * testsuite/ld-powerpc/relbrlt.s: Likewise. * testsuite/ld-powerpc/tlsso.r: Likewise. * testsuite/ld-powerpc/tlstocso.r: Likewise. gold/ * powerpc.cc (Target_powerpc::lplt_): New variable. (Target_powerpc::lplt_section): Associated accessor. (Target_powerpc::plt_off): Handle local non-ifunc symbols. (Target_powerpc::make_lplt_section): New function. (Target_powerpc::make_local_plt_entry): New function. (Powerpc_relobj::do_relocate_sections): Write out lplt. (Output_data_plt_powerpc::first_plt_entry_offset): Zero for lplt. (Output_data_plt_powerpc::add_local_entry): New function. (Output_data_plt_powerpc::do_write): Ignore lplt. (Target_powerpc::make_iplt_section): Make lplt first. (Target_powerpc::make_brlt_section): Make .branch_lt relro. (Target_powerpc::Scan::local): Handle PLT16 relocs.
2018-02-26ld error/warning messagesAlan Modra3-3/+3
This patch standardizes messages in ld, to better conform to the GNU coding standard. Besides issues of capitalization and full-stops, I've - Split up help messages for target options, so that adding a new option does not mean loss of translation for all the others. - Embedded tabs have been removed, since a user might have tab stops set at other than 8 char intervals. - Added missing program name (%P). ld isn't the compiler. - Put %F and %X first (and removed %X if %F was present). These can go anywhere, but look silly in the m%Fiddle of a message, and choosing "%P%F:" in some messages but "%F%P:" in others leads to the likelihood of duplication in ld.pot. Besides, the colon belongs with %P. * emulparams/call_nop.sh, * emulparams/cet.sh, * emulparams/elf32mcore.sh, * emultempl/aarch64elf.em * emultempl/aix.em, * emultempl/alphaelf.em, * emultempl/armcoff.em, * emultempl/armelf.em, * emultempl/avrelf.em, * emultempl/beos.em, * emultempl/bfin.em, * emultempl/cr16elf.em, * emultempl/elf32.em, * emultempl/elf-generic.em, * emultempl/hppaelf.em, * emultempl/linux.em, * emultempl/lnk960.em, * emultempl/m68hc1xelf.em, * emultempl/m68kcoff.em, * emultempl/m68kelf.em, * emultempl/metagelf.em, * emultempl/mipself.em, * emultempl/mmix-elfnmmo.em, * emultempl/mmo.em, * emultempl/msp430.em, * emultempl/nds32elf.em, * emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em, * emultempl/ppc32elf.em, * emultempl/ppc64elf.em, * emultempl/scoreelf.em, * emultempl/sh64elf.em, * emultempl/spuelf.em, * emultempl/sunos.em, * emultempl/tic6xdsbt.em, * emultempl/ticoff.em, * emultempl/v850elf.em, * emultempl/vms.em, * emultempl/vxworks.em, * emultempl/xtensaelf.em, * ldcref.c, * ldctor.c, * ldexp.c, * ldfile.c, * ldgram.y, * ldlang.c, * ldmain.c, * ldmisc.c, * ldwrite.c, * lexsup.c, * mri.c, * pe-dll.c, * plugin.c: Standardize error/warning messages. * testsuite/ld-arc/jli-overflow.err, * testsuite/ld-arm/cmse-implib-errors.out, * testsuite/ld-arm/cmse-new-earlier-later-implib.out, * testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out, * testsuite/ld-arm/cmse-new-wrong-implib.out, * testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out, * testsuite/ld-arm/cmse-veneers-wrong-entryfct.out, * testsuite/ld-arm/vxworks1-static.d, * testsuite/ld-cris/tls-err-20x.d, * testsuite/ld-cris/tls-err-29.d, * testsuite/ld-cris/tls-err-31.d, * testsuite/ld-cris/tls-err-33.d, * testsuite/ld-cris/tls-err-35.d, * testsuite/ld-cris/tls-err-37.d, * testsuite/ld-cris/tls-err-39.d, * testsuite/ld-cris/tls-err-41.d, * testsuite/ld-cris/tls-err-43.d, * testsuite/ld-cris/tls-err-45.d, * testsuite/ld-cris/tls-err-47.d, * testsuite/ld-cris/tls-err-49.d, * testsuite/ld-cris/tls-err-51.d, * testsuite/ld-cris/tls-err-67.d, * testsuite/ld-elf/dwarf2.err, * testsuite/ld-elf/dwarf3.err, * testsuite/ld-elf/orphan-5.l, * testsuite/ld-elf/orphan-6.l, * testsuite/ld-i386/vxworks1-static.d, * testsuite/ld-mips-elf/bal-jalx-pic-micromips-n32.d, * testsuite/ld-mips-elf/bal-jalx-pic-micromips-n64.d, * testsuite/ld-mips-elf/bal-jalx-pic-micromips.d, * testsuite/ld-mips-elf/bal-jalx-pic-n32.d, * testsuite/ld-mips-elf/bal-jalx-pic-n64.d, * testsuite/ld-mips-elf/bal-jalx-pic.d, * testsuite/ld-mips-elf/jal-global-overflow-1.d, * testsuite/ld-mips-elf/jal-local-overflow-1.d, * testsuite/ld-mips-elf/mode-change-error-1.d, * testsuite/ld-mips-elf/unaligned-branch-2.d, * testsuite/ld-mips-elf/unaligned-branch-ignore-2.d, * testsuite/ld-mips-elf/unaligned-branch-ignore-micromips.d, * testsuite/ld-mips-elf/unaligned-branch-ignore-mips16.d, * testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1.d, * testsuite/ld-mips-elf/unaligned-branch-micromips.d, * testsuite/ld-mips-elf/unaligned-branch-mips16.d, * testsuite/ld-mips-elf/unaligned-branch-r6-1.d, * testsuite/ld-mips-elf/unaligned-branch-r6-2.d, * testsuite/ld-mips-elf/unaligned-branch.d, * testsuite/ld-mips-elf/unaligned-jalx-1.d, * testsuite/ld-mips-elf/unaligned-jalx-3.d, * testsuite/ld-mips-elf/unaligned-jalx-addend-1.d, * testsuite/ld-mips-elf/unaligned-jalx-addend-3.d, * testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-1.d, * testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d, * testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d, * testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d, * testsuite/ld-mips-elf/unaligned-jump-micromips.d, * testsuite/ld-mips-elf/unaligned-jump-mips16.d, * testsuite/ld-mips-elf/unaligned-jump.d, * testsuite/ld-mips-elf/unaligned-ldpc-1.d, * testsuite/ld-mips-elf/unaligned-lwpc-1.d, * testsuite/ld-mips-elf/undefined.d, * testsuite/ld-mips-elf/vxworks1-static.d, * testsuite/ld-mmix/bpo-20.d, * testsuite/ld-mmix/bpo-20m.d, * testsuite/ld-mmix/bpo-7.d, * testsuite/ld-mmix/bpo-7m.d, * testsuite/ld-mmix/bpo-8.d, * testsuite/ld-mmix/bpo-8m.d, * testsuite/ld-mmix/greg-17.d, * testsuite/ld-mmix/greg-18.d, * testsuite/ld-mmix/greg-8.d, * testsuite/ld-mmix/greg-9.d, * testsuite/ld-plugin/plugin-14.d, * testsuite/ld-plugin/plugin-15.d, * testsuite/ld-plugin/plugin-16.d, * testsuite/ld-plugin/plugin-20.d, * testsuite/ld-plugin/plugin-21.d, * testsuite/ld-plugin/plugin-22.d, * testsuite/ld-plugin/plugin-23.d, * testsuite/ld-plugin/plugin-6.d, * testsuite/ld-plugin/plugin-7.d, * testsuite/ld-plugin/plugin-8.d, * testsuite/ld-powerpc/aix-weak-3-32.d, * testsuite/ld-powerpc/aix-weak-3-64.d, * testsuite/ld-powerpc/vxworks1-static.d, * testsuite/ld-sh/vxworks1-static.d, * testsuite/ld-sparc/vxworks1-static.d, * testsuite/ld-undefined/undefined.exp, * testsuite/ld-x86-64/pie1.d: Update for changed errors and warnings. * testsuite/ld-elf/warn1.d, * testsuite/ld-elf/warn2.d: Correct regex.
2018-02-26PPC error/warning messagesAlan Modra8-8/+8
The GNU coding standard says error messages should be of the form program:sourcefile:lineno: message or program: message and "The string message should not begin with a capital letter when it follows a program name and/or file name, because that isn’t the beginning of a sentence. (The sentence conceptually starts at the beginning of the line.) Also, it should not end with a period." This patch does that for ppc, and removes some British spelling. I've also switched some error output from using the linker callback einfo to _bfd_error_handler, due to improved compilation time argument checking now done for the latter function. bfd/ * elf32-ppc.c: Standardize error/warning messages. Use _bfd_error_handler rather than einfo when einfo features not used. * elf64-ppc.c: Likewise. ld/ * testsuite/ld-powerpc/attr-gnu-12-21.d: Update. * testsuite/ld-powerpc/attr-gnu-4-12.d: Update. * testsuite/ld-powerpc/attr-gnu-4-13.d: Update. * testsuite/ld-powerpc/attr-gnu-4-21.d: Update. * testsuite/ld-powerpc/attr-gnu-4-23.d: Update. * testsuite/ld-powerpc/attr-gnu-4-31.d: Update. * testsuite/ld-powerpc/attr-gnu-4-32.d: Update. * testsuite/ld-powerpc/attr-gnu-8-23.d: Update.
2018-02-07Revert "PowerPC PLT speculative execution barriers"Alan Modra4-13/+13
This reverts most of commit 1be5d8d3bb. Left in place are addition of --no-plt-align to some ppc32 ld tests and the ld.texinfo --no-plt-thread-safe fix.
2018-01-17PowerPC PLT speculative execution barriersAlan Modra4-13/+13
Spectre variant 2 mitigation for PowerPC and PowerPC64. bfd/ * elf32-ppc.c (GLINK_ENTRY_SIZE): Handle speculation barrier. (CRSETEQ, BEQCTRM): Define. (is_nonpic_glink_stub): Don't check bctr. (ppc_elf_link_hash_table_create): Init new ppc_elf_params field. (ppc_elf_relax_section): Size speculation barrier. (output_bctr): New function. (write_glink_stub): Use output_bctr. (ppc_elf_relocate_section): Use output_bctr for long branch stub. (ppc_elf_finish_dynamic_symbol): Likewise. (ppc_elf_finish_dynamic_sections): Use output_bctr. * elf32-ppc.h (struct ppc_elf_params): Add speculate_indirect_jumps. * elf64-ppc.c (CRSETEQ, BEQCTRM, BEQCTRLM): Define. (GLINK_PLTRESOLVE_SIZE): Size speculation barrier. (size_global_entry_stubs): Handle speculation barrier sizing. (plt_stub_size): Likewise. (output_bctr): New function. (build_plt_stub, build_tls_get_addr_stub): Output speculation barrier. (ppc_build_one_stub): Likewise for ppc_stub_plt_branch. (ppc_size_one_stub): Size speculation barrier in ppc_stub_plt_branch. (build_global_entry_stubs): Output speculation barrier. (ppc64_elf_build_stubs): Likewise in __glink_PLTresolve stub. * elf64-ppc.h (struct ppc64_elf_params): Add speculate_indirect_jumps. gold/ * options.h (speculate_indirect_jumps): New option. * powerpc.cc (beqctrm, beqctrlm, crseteq): New insn constants. (output_bctr): New function. (Stub_table::plt_call_size): Add space for speculation barrier. (Stub_table::branch_stub_size): Likewise. (Output_data_glink::pltresolve_size): Likewise. (Stub_table::do_write): Output speculation barriers. ld/ * emultempl/ppc32elf.em (params): Init new field. (OPTION_SPECULATE_INDIRECT_JUMPS): Define. (OPTION_NO_SPECULATE_INDIRECT_JUMPS): Define. (PARSE_AND_LIST_LONGOPTS): Handle new options. (PARSE_AND_LIST_ARGS_CASES): Likewise. (PARSE_AND_LIST_OPTIONS): Likewise. * emultempl/ppc64elf.em (params): Init new field. (OPTION_SPECULATE_INDIRECT_JUMPS): Define. (OPTION_NO_SPECULATE_INDIRECT_JUMPS): Define. (PARSE_AND_LIST_LONGOPTS): Handle --speculate-indirect-jumps. (PARSE_AND_LIST_OPTIONS): Likewise. (PARSE_AND_LIST_ARGS_CASES): Likewise. * ld.texinfo (--no-plt-thread-safe): Correct itemx. (--speculate-indirect-jumps): Document. * testsuite/ld-powerpc/elfv2exe.d, * testsuite/ld-powerpc/elfv2so.d, * testsuite/ld-powerpc/relbrlt.d, * testsuite/ld-powerpc/powerpc.exp: Disable plt alignment and speculation barriers on various tests.
2018-01-17PowerPC PLT stub tidyAlan Modra14-74/+50
This is in preparation for the next patch adding Spectre variant 2 mitigation for PowerPC and PowerPC64. Besides tidying code involved in stub output (to reduce the number of places where bctr is output), the patch adds some user visible features: 1) PowerPC64 ELFv2 global entry stubs now are aligned under the control of --plt-align, with a default alignment of 32 bytes. 2) PowerPC64 __glink_PLTresolve is no longer padded out with nops. 3) PowerPC32 PLT stubs are aligned under the control of --plt-align, with the default alignment being 16 bytes as before. 4) The PowerPC32 branch/nop table emitted before __glink_PLTresolve is now smaller in many cases. It was sized incorrectly when the __tls_get_addr_opt stub was used, and unnecessarily included space for local ifuncs. bfd/ * elf32-ppc.c (GLINK_ENTRY_SIZE): Add parameters, handle __tls_get_addr_opt, and alignment sizing. (TLS_GET_ADDR_GLINK_SIZE): Delete. (is_nonpic_glink_stub): Don't use GLINK_ENTRY_SIZE. (ppc_elf_get_synthetic_symtab): Recognize stubs spaced at 4, 6, or 8 insns. (ppc_elf_link_hash_table_create): Init new ppc_elf_params field. (allocate_dynrelocs): Use new GLINK_ENTRY_SIZE. (ppc_elf_size_dynamic_sections): Likewise. Size branch table by PLT reloc count. (write_glink_stub): Handle __tls_get_addr_opt stub. Pad out to size given by GLINK_ENTRY_SIZE. (ppc_elf_relocate_section): Adjust write_glink_stub call. (ppc_elf_finish_dynamic_symbol): Likewise. (ppc_elf_finish_dynamic_sections): Write PLTresolve without using insn array since so many need rewriting. * elf32-ppc.h (struct ppc_elf_params): Add plt_stub_align. * elf64-ppc.c (GLINK_PLTRESOLVE_SIZE): Rename from GLINK_CALL_STUB_SIZE. Add htab param and evaluate to size without nops. Adjust all uses. (ppc64_elf_get_synthetic_symtab): Don't use GLINK_CALL_STUB_SIZE in glink_vma calculation. (struct ppc_link_hash_table): Add global_entry section pointer. (create_linkage_sections): Create separate section for global entry stubs. (PPC_LO, PPC_HI, PPC_HA): Move earlier. (size_global_entry_stubs): Handle sizing for aligned stubs. (ppc64_elf_size_dynamic_sections): Handle global_entry alloc, and don't stash end of glink branch table in rawsize. (ppc_build_one_stub): Rewrite stub size calculations. (build_global_entry_stubs): Use new section. (ppc64_elf_build_stubs): Don't pad __glink_PLTresolve with nops. Build lazy link stubs out to end of section. Build global entry stubs in new section. gold/ * options.h (plt_align): Support for PowerPC32 too. * powerpc.cc (Stub_table::stub_align): Heed --plt-align for 32-bit. (Stub_table::plt_call_size, branch_stub_size): Tidy. (Stub_table::plt_call_align): Implement using stub_align. (Output_data_glink::global_entry_align): New function. (Output_data_glink::global_entry_off): New function. (Output_data_glink::global_entry_address): Use global_entry_off. (Output_data_glink::pltresolve_size): New function, replacing pltresolve_size_ constant. Update all uses. (Output_data_glink::add_global_entry): Align offset. (Output_data_glink::set_final_data_size): Use global_entry_align. (Stub_table::do_write): Don't pad __glink_PLTrelsolve with nops. Tidy stub output. Use global_entry_off. ld/ * emultempl/ppc32elf.em (params): Init new field. (enum ppc32_opt): New enum to define OPTION_* values. Add OPTION_PLT_ALIGN and OPTION_NO_PLT_ALIGN. (PARSE_AND_LIST_LONGOPTS): Handle new options. (PARSE_AND_LIST_ARGS_CASES): Likewise. (PARSE_AND_LIST_OPTIONS): Likewise. Break up help output. * emultempl/ppc64elf.em (ppc_add_stub_section): Init alignment correctly for negative --plt-stub-align. * testsuite/ld-powerpc/elfv2exe.d, * testsuite/ld-powerpc/elfv2so.d, * testsuite/ld-powerpc/relbrlt.d, * testsuite/ld-powerpc/relbrlt.s, * testsuite/ld-powerpc/tlsexe.d, * testsuite/ld-powerpc/tlsexe.r, * testsuite/ld-powerpc/tlsexe32.d, * testsuite/ld-powerpc/tlsexe32.g, * testsuite/ld-powerpc/tlsexe32.r, * testsuite/ld-powerpc/tlsexetoc.d, * testsuite/ld-powerpc/tlsexetoc.r, * testsuite/ld-powerpc/tlsopt5_32.d, * testsuite/ld-powerpc/tlsso.d, * testsuite/ld-powerpc/tlstocso.d: Update for changed stub order.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra3-3/+3
2017-12-04Modify ppceabi ld tests to run on all powerpc ELF targetsAlan Modra1-19/+17
* testsuite/ld-powerpc/powerpc.exp (ppceabitests): Add -a32 -mbig to assembler options, and -melf32ppc to linker options. Always run these tests.
2017-11-12ld: Remove PF_X from PT_PHDR segmentH.J. Lu3-3/+3
It was reasonable to mark PT_PHDR segment with PF_X for compatibility with UnixWare and Solaris linkers 20 years ago. But it is inappropriate today when the primary OS of GNU ld is Linux. This patch removes PF_X from PT_PHDR segment as gold does. Tested natively on Linux/x86 as well as crosss-binutils for alpha-linux, ia64-linux, powerpc64-linux, powerpc-linux, s390-linux, s390x-linux, sparc64-linux and sparc-linux. bfd/ PR ld/22423 * elf.c (_bfd_elf_map_sections_to_segments): Remove PF_X from PT_PHDR segment. ld/ PR ld/22423 * testsuite/ld-alpha/tlsbin.rd: Replace "R E " with "R +" for PT_PHDR segment. * testsuite/ld-alpha/tlsbinr.rd: Likewise. * testsuite/ld-ia64/tlsbin.rd: Likewise. * testsuite/ld-powerpc/tlsexe.r: Likewise. * testsuite/ld-powerpc/tlsexe32.r: Likewise. * testsuite/ld-powerpc/tlsexetoc.r: Likewise. * testsuite/ld-s390/tlsbin.rd: Likewise. * testsuite/ld-s390/tlsbin_64.rd: Likewise. * testsuite/ld-sparc/tlssunbin32.rd: Likewise. * testsuite/ld-sparc/tlssunbin64.rd: Likewise. * testsuite/ld-elf/pr22423.d: New test.
2017-11-07readelf ngettext fixesAlan Modra13-13/+13
This patch is a first pass at fixing readelf message pluralization. I've deliberately not fixed the "out of memory" errors since it's very unlikely that they will ever be complaining about not being able to allocate for a single entry, and a few others where the size is very unlikely to be 1 byte. Then there are messages like this one: "Out of %lu items there are %zu bucket clashes (longest of %zu entries).\n" I suppose this could be split into three parts, "Of %lu items ", "there are %zu bucket clashes ", and "(longest of %zu entries).\n", each part being printed separately, but that might not be ideal for sentence construction in other languages. For now I'm punting on this one. Changes to readelf output require lots of testsuite adjustment.. binutils/ * dwarf.c (read_uleb128): Properly pluralize messages. (display_debug_lines_raw, display_debug_loc): Likewise. (display_debug_names, process_cu_tu_index): Likewise. * od-macho.c (dump_code_signature_superblob): Likewise. * readelf.c (process_program_headers): Likewise. (process_section_header, process_relocs): Likewise. (hppa_process_unwind, arm_process_unwind): Likewise. (process_dynamic_section, process_version_sections): Likewise. (process_symbol_table, process_syminfo): Likewise. (apply_relocations, process_mips_specific): Likewise. (process_gnu_liblist, process_notes_at): Likewise. (process_archive): Likewise. * testsuite/binutils-all/dw2-1.W, * testsuite/binutils-all/dw2-3.W, * testsuite/binutils-all/dw2-3gabi.W, * testsuite/binutils-all/dw5.S, * testsuite/binutils-all/dw5.W, * testsuite/binutils-all/i386/compressed-1a.d, * testsuite/binutils-all/libdw2-compressedgabi.out, * testsuite/binutils-all/objdump.W, * testsuite/binutils-all/readelf.r, * testsuite/binutils-all/readelf.r-64, * testsuite/binutils-all/x86-64/compressed-1a.d: Update for pluralization fixes. gas/ * testsuite/gas/arm/got_prel.d, * testsuite/gas/elf/dwarf2-1.d, * testsuite/gas/elf/dwarf2-2.d, * testsuite/gas/elf/dwarf2-3.d, * testsuite/gas/elf/dwarf2-5.d, * testsuite/gas/elf/dwarf2-6.d, * testsuite/gas/i386/debug1.d, * testsuite/gas/i386/dw2-compress-1.d, * testsuite/gas/i386/dw2-compress-3a.d, * testsuite/gas/i386/dw2-compress-3b.d, * testsuite/gas/i386/dw2-compressed-1.d, * testsuite/gas/i386/dw2-compressed-3a.d, * testsuite/gas/i386/dw2-compressed-3b.d, * testsuite/gas/i386/ilp32/x86-64-localpic.d, * testsuite/gas/i386/localpic.d, * testsuite/gas/i386/x86-64-localpic.d, * testsuite/gas/ia64/pr13167.d, * testsuite/gas/mips/loc-swap-2.d, * testsuite/gas/mips/loc-swap.d, * testsuite/gas/mips/micromips@loc-swap-2.d, * testsuite/gas/mips/micromips@loc-swap.d, * testsuite/gas/mips/mips16-dwarf2-n32.d, * testsuite/gas/mips/mips16-dwarf2.d, * testsuite/gas/mips/mips16@loc-swap-2.d, * testsuite/gas/mips/mips16@loc-swap.d, * testsuite/gas/mips/mips16e@loc-swap.d, * testsuite/gas/mmix/bspec-1.d, * testsuite/gas/mmix/bspec-2.d, * testsuite/gas/tic6x/unwind-1.d, * testsuite/gas/tic6x/unwind-2.d, * testsuite/gas/tic6x/unwind-3.d: Update for pluralization fixes. ld/ * testsuite/ld-aarch64/ifunc-13.d, * testsuite/ld-aarch64/ifunc-15.d, * testsuite/ld-aarch64/ifunc-20.d, * testsuite/ld-alpha/tlsbin.rd, * testsuite/ld-alpha/tlspic.rd, * testsuite/ld-arm/ifunc-3.rd, * testsuite/ld-arm/ifunc-9.rd, * testsuite/ld-arm/unwind-mix.d, * testsuite/ld-arm/unwind-rel.d, * testsuite/ld-cris/hiddef1.d, * testsuite/ld-cris/libdso-13.d, * testsuite/ld-cris/libdso-2.d, * testsuite/ld-cris/pr16044.d, * testsuite/ld-cris/tls-local-63.d, * testsuite/ld-cris/tls-local-64.d, * testsuite/ld-cris/tls-und-38.d, * testsuite/ld-cris/tls-und-42.d, * testsuite/ld-cris/tls-und-46.d, * testsuite/ld-cris/tls-und-50.d, * testsuite/ld-cris/weakref3.d, * testsuite/ld-cris/weakref4.d, * testsuite/ld-elf/comm-data2r.rd, * testsuite/ld-elf/discard1.d, * testsuite/ld-elf/discard2.d, * testsuite/ld-elf/pr19539.d, * testsuite/ld-elf/pr22374-1.r, * testsuite/ld-elf/pr22374-2.r, * testsuite/ld-i386/combreloc.d, * testsuite/ld-i386/emit-relocs-nacl.rd, * testsuite/ld-i386/emit-relocs.rd, * testsuite/ld-i386/pr13302.d, * testsuite/ld-i386/pr17709-nacl.rd, * testsuite/ld-i386/pr17709.rd, * testsuite/ld-i386/pr19539.d, * testsuite/ld-i386/pr19615.d, * testsuite/ld-i386/pr19636-1a.d, * testsuite/ld-i386/pr19636-1e.d, * testsuite/ld-i386/pr19636-1f.d, * testsuite/ld-i386/pr19636-2a.d, * testsuite/ld-i386/pr19636-2b.d, * testsuite/ld-i386/pr19636-2d-nacl.d, * testsuite/ld-i386/pr19636-2e-nacl.d, * testsuite/ld-i386/pr19636-3a.d, * testsuite/ld-i386/pr19636-3d.d, * testsuite/ld-i386/pr19636-3e.d, * testsuite/ld-i386/pr19636-4a.d, * testsuite/ld-i386/pr19645.d, * testsuite/ld-i386/pr19827-nacl.rd, * testsuite/ld-i386/pr19827.rd, * testsuite/ld-i386/pr20253-4a.d, * testsuite/ld-i386/pr20253-4b.d, * testsuite/ld-i386/pr20253-5.d, * testsuite/ld-i386/tlsbin-nacl.rd, * testsuite/ld-i386/tlsbin.rd, * testsuite/ld-i386/tlspic-nacl.rd, * testsuite/ld-i386/tlspic.rd, * testsuite/ld-i386/undefweakb.d, * testsuite/ld-ia64/tlsbin.rd, * testsuite/ld-ia64/tlspic.rd, * testsuite/ld-ifunc/ifunc-13-i386.d, * testsuite/ld-ifunc/ifunc-13-x86-64.d, * testsuite/ld-ifunc/ifunc-15-i386.d, * testsuite/ld-ifunc/ifunc-15-x86-64.d, * testsuite/ld-ifunc/ifunc-20-i386.d, * testsuite/ld-ifunc/ifunc-20-x86-64.d, * testsuite/ld-ifunc/ifunc-23a-x86.d, * testsuite/ld-ifunc/ifunc-23b-x86.d, * testsuite/ld-ifunc/ifunc-23c-x86.d, * testsuite/ld-ifunc/ifunc-24a-x86.d, * testsuite/ld-ifunc/ifunc-24b-x86.d, * testsuite/ld-ifunc/ifunc-24c-x86.d, * testsuite/ld-ifunc/ifunc-25a-x86.d, * testsuite/ld-ifunc/ifunc-25b-x86.d, * testsuite/ld-ifunc/ifunc-25c-x86.d, * testsuite/ld-m68k/got-1.d, * testsuite/ld-mips-elf/vxworks1.rd, * testsuite/ld-powerpc/ambiguousv1.d, * testsuite/ld-powerpc/ambiguousv1b.d, * testsuite/ld-powerpc/ambiguousv2.d, * testsuite/ld-powerpc/ambiguousv2b.d, * testsuite/ld-powerpc/tlsexe.r, * testsuite/ld-powerpc/tlsexe32.r, * testsuite/ld-powerpc/tlsexetoc.r, * testsuite/ld-powerpc/tlsso.r, * testsuite/ld-powerpc/tlsso32.r, * testsuite/ld-powerpc/tlstocso.r, * testsuite/ld-powerpc/vle-multiseg-1.d, * testsuite/ld-powerpc/vle-multiseg-2.d, * testsuite/ld-powerpc/vle-multiseg-3.d, * testsuite/ld-s390/tlsbin.rd, * testsuite/ld-s390/tlsbin_64.rd, * testsuite/ld-s390/tlspic.rd, * testsuite/ld-s390/tlspic_64.rd, * testsuite/ld-sh/ld-r-1.d, * testsuite/ld-sh/sh64/gotplt.d, * testsuite/ld-sh/shared-1.d, * testsuite/ld-sh/tlsbin-2.d, * testsuite/ld-sh/tlspic-2.d, * testsuite/ld-sparc/gotop32.rd, * testsuite/ld-sparc/gotop64.rd, * testsuite/ld-sparc/tlssunpic32.rd, * testsuite/ld-sparc/tlssunpic64.rd, * testsuite/ld-sparc/vxworks1-lib.rd, * testsuite/ld-tic6x/shlib-app-1.rd, * testsuite/ld-tic6x/shlib-app-1b.rd, * testsuite/ld-tic6x/shlib-app-1r.rd, * testsuite/ld-tic6x/shlib-app-1rb.rd, * testsuite/ld-tic6x/shlib-noindex.rd, * testsuite/ld-vax-elf/export-class-data.rd, * testsuite/ld-x86-64/pr13082-1a.d, * testsuite/ld-x86-64/pr13082-1b.d, * testsuite/ld-x86-64/pr13082-2a.d, * testsuite/ld-x86-64/pr13082-2b.d, * testsuite/ld-x86-64/pr13082-3a.d, * testsuite/ld-x86-64/pr13082-3c.d, * testsuite/ld-x86-64/pr13082-4a.d, * testsuite/ld-x86-64/pr13082-5a.d, * testsuite/ld-x86-64/pr13082-5b.d, * testsuite/ld-x86-64/pr13082-6a.d, * testsuite/ld-x86-64/pr13082-6b.d, * testsuite/ld-x86-64/pr17709-nacl.rd, * testsuite/ld-x86-64/pr17709.rd, * testsuite/ld-x86-64/pr19539a.d, * testsuite/ld-x86-64/pr19539b.d, * testsuite/ld-x86-64/pr19615.d, * testsuite/ld-x86-64/pr19636-1a.d, * testsuite/ld-x86-64/pr19636-1d.d, * testsuite/ld-x86-64/pr19636-1e.d, * testsuite/ld-x86-64/pr19636-2a.d, * testsuite/ld-x86-64/pr19636-2e.d, * testsuite/ld-x86-64/pr19636-2f.d, * testsuite/ld-x86-64/pr19636-3a.d, * testsuite/ld-x86-64/pr19645.d, * testsuite/ld-x86-64/pr19807-2b.d, * testsuite/ld-x86-64/pr19807-2d.d, * testsuite/ld-x86-64/pr19827-nacl.rd, * testsuite/ld-x86-64/pr19827.rd, * testsuite/ld-x86-64/pr20253-4a.d, * testsuite/ld-x86-64/pr20253-4b.d, * testsuite/ld-x86-64/pr20253-4d.d, * testsuite/ld-x86-64/pr20253-4e.d, * testsuite/ld-x86-64/pr20253-5a.d, * testsuite/ld-x86-64/pr20253-5b.d, * testsuite/ld-x86-64/tlsbin-nacl.rd, * testsuite/ld-x86-64/tlsbin.rd, * testsuite/ld-x86-64/tlspic-nacl.rd, * testsuite/ld-x86-64/tlspic.rd, * testsuite/ld-x86-64/tlspic2-nacl.rd: Update for pluralization fixes.
2017-11-01PR22374, PowerPC unnecessary PLT entriesAlan Modra1-5/+0
We don't need a PLT entry when function pointer initialization in a read/write section is the only reference to a given function symbol. This patch prevents the unnecessary PLT entry, and ensures no dynamic relocs are emitted when UNDEFWEAK_NO_DYNAMIC_RELOC says so. bfd/ PR 22374 * elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Don't create a plt entry when just a dynamic reloc can serve. Ensure no dynamic relocations when UNDEFWEAK_NO_DYNAMIC_RELOC by setting non_got_ref. Expand and move the non_got_ref comment. * elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol): Likewise. ld/ * testsuite/ld-powerpc/ambiguousv2.d: Remove FIXME.
2017-10-05Change readelf so that when --wide is active a relocation's full name is ↵Nick Clifton1-1/+1
displayed. PR 22262 binutils* readelf.c (dump_relocations): Do not truncate reloc names when displaying output in wide mode. ld * testsuite/ld-powerpc/relocsort.d: Update expected output (for longer reloc names).
2017-09-21Reduce excessive .eh_frame alignment for powerpcAlan Modra1-6/+2
PowerPC64 .cfi directives use DW_EH_PE_sdata4 encoding for .eh_frame, so there is no real reason why .eh_frame should be 8 byte aligned. gas/ * config/tc-ppc.h (EH_FRAME_ALIGNMENT): Define. ld/ * testsuite/ld-powerpc/tlsopt5.wf: Update for reduced alignment.
2017-09-10PowerPC64 --plt-alignAlan Modra3-14/+18
This changes the PowerPC64 --plt-align option to perform the usual alignment of code as suggested by its name, as well as the previous behaviour of padding so as to reduce boundary crossing. The old behaviour is had by using a negative parameter. The default is also changed to align plt stub code by default to 32 byte boundaries, the point being to get better bctr branch prediction on power8 and power9 hardware. bfd/ * elf64-ppp.c (plt_stub_pad): Handle positive and negative plt_stub_align. ld/ * ld.texinfo (--plt-align): Describe new behaviour of option. * emultempl/ppc64elf.em (params): Default plt_stub_align to 5. * testsuite/ld-powerpc/powerpc.exp: Pass --no-plt-align for selected tests. * testsuite/ld-powerpc/relbrlt.d: Pass --no-plt-align. * testsuite/ld-powerpc/elfv2so.d: Adjust expected output.
2017-08-30PowerPC TPREL16_HA/LO reloc optimizationAlan Modra10-109/+178
In the TLS GD/LD to LE optimization, ld replaces a sequence like addi 3,2,x@got@tlsgd R_PPC64_GOT_TLSGD16 x bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x R_PPC64_REL24 __tls_get_addr nop with addis 3,13,x@tprel@ha R_PPC64_TPREL16_HA x addi 3,3,x@tprel@l R_PPC64_TPREL16_LO x nop When the tprel offset is small, this can be further optimized to nop addi 3,13,x@tprel nop bfd/ * elf64-ppc.c (struct ppc_link_hash_table): Add do_tls_opt. (ppc64_elf_tls_optimize): Set it. (ppc64_elf_relocate_section): Nop addis on TPREL16_HA, and convert insn on TPREL16_LO and TPREL16_LO_DS relocs to use r13 when addis would add zero. * elf32-ppc.c (struct ppc_elf_link_hash_table): Add do_tls_opt. (ppc_elf_tls_optimize): Set it. (ppc_elf_relocate_section): Nop addis on TPREL16_HA, and convert insn on TPREL16_LO relocs to use r2 when addis would add zero. gold/ * powerpc.cc (Target_powerpc::Relocate::relocate): Nop addis on TPREL16_HA, and convert insn on TPREL16_LO and TPREL16_LO_DS relocs to use r2/r13 when addis would add zero. ld/ * testsuite/ld-powerpc/tls.s: Add calls with tls markers. * testsuite/ld-powerpc/tls32.s: Likewise. * testsuite/ld-powerpc/powerpc.exp: Run tls marker tests. * testsuite/ld-powerpc/tls.d: Adjust for TPREL16_HA/LO optimization. * testsuite/ld-powerpc/tlsexe.d: Likewise. * testsuite/ld-powerpc/tlsexetoc.d: Likewise. * testsuite/ld-powerpc/tlsld.d: Likewise. * testsuite/ld-powerpc/tlsmark.d: Likewise. * testsuite/ld-powerpc/tlsopt4.d: Likewise. * testsuite/ld-powerpc/tlstoc.d: Likewise.
2017-08-30PowerPC64 __tls_get_addr sequence optimizationAlan Modra7-30/+30
There isn't a good reason for ld.bfd to behave differently from gold in the code generated by TLS GD/LD to LE optimization. bfd/ * elf64-ppc.c (ppc64_elf_relocate_section): When optimizing __tls_get_addr call sequences to LE, don't move the addi down to the nop. Replace the bl with addi and leave the nop alone. ld/ * testsuite/ld-powerpc/tls.d: Update. * testsuite/ld-powerpc/tlsexe.d: Update. * testsuite/ld-powerpc/tlsexetoc.d: Update. * testsuite/ld-powerpc/tlsld.d: Update. * testsuite/ld-powerpc/tlsmark.d: Update. * testsuite/ld-powerpc/tlsopt4.d: Update. * testsuite/ld-powerpc/tlstoc.d: Update.
2017-08-07Support different ld --hash-style in the ld testsuiteAlan Modra9-58/+57
When ld is running with something other than --hash-style=sysv by default, numerous tests need tweaking. Most of the changes just add --hash-style=sysv. I didn't want to make --hash-style=sysv global as that means --hash-style=gnu isn't well tested. * testsuite/ld-alpha/alpha.exp: Add --hash-style=sysv to various test's ld options. * testsuite/ld-arm/arm-elf.exp: Likewise. * testsuite/ld-elf/elf.exp: Likewise. * testsuite/ld-elf/readelf.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-ia64/ia64.exp: Likewise. * testsuite/ld-m68k/m68k.exp: Likewise. * testsuite/ld-metag/metag.exp: Likewise. * testsuite/ld-powerpc/powerpc.exp: Likewise. * testsuite/ld-s390/s390.exp: Likewise. * testsuite/ld-sh/sh-vxworks.exp: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * testsuite/ld-sparc/sparc.exp: Likewise. * testsuite/ld-tic6x/tic6x.exp: Likewise. * testsuite/ld-vax-elf/vax-elf.exp: Likewise. * testsuite/ld-x86-64/mpx.exp: Likewise. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-xtensa/xtensa.exp: Likewise. * testsuite/ld-elf/comm-data2.ld: Add .gnu.hash output section. * testsuite/ld-elf/pr20828-v.ld: Likewise. * testsuite/ld-elf/pr20828.ld: Likewise. * testsuite/ld-elf/pr21233.ld: Likewise. * testsuite/ld-elf/pr21384.ld: Likewise. * testsuite/ld-elf/provide-hidden-1.ld: Likewise. * testsuite/ld-elf/provide-hidden-2.ld: Likewise. * testsuite/ld-elf/provide-hidden-s.ld: Likewise. * testsuite/ld-scripts/cross1.t: Likewise. * testsuite/ld-elf/stab.d: Adjust allowed section indices. * testsuite/ld-i386/pie1.d: Don't match addresses. * testsuite/ld-i386/plt-pic2.dd: Likewise. * testsuite/ld-i386/pr19636-1d.d: Likewise. * testsuite/ld-i386/pr19636-2c.d: Likewise. * testsuite/ld-powerpc/elfv2so.d: Likewise. * testsuite/ld-powerpc/tlsopt5.d: Likewise. * testsuite/ld-powerpc/tlsopt5.wf: Likewise. * testsuite/ld-powerpc/tlsopt5_32.d: Likewise. * testsuite/ld-i386/pr19636-2b.d: Don't match _start. * testsuite/ld-powerpc/ambiguousv1.d: Relax symbol count, index and address match. * testsuite/ld-powerpc/ambiguousv1b.d: Likewise. * testsuite/ld-powerpc/ambiguousv2.d: Likewise. * testsuite/ld-powerpc/ambiguousv2b.d: Likewise. * testsuite/ld-aarch64/gc-plt-relocs.d: Run ld with --hash-style=sysv. * testsuite/ld-aarch64/ifunc-1.d: Likewise. * testsuite/ld-aarch64/ifunc-2.d: Likewise. * testsuite/ld-aarch64/ifunc-21.d: Likewise. * testsuite/ld-aarch64/relasz.d: Likewise. * testsuite/ld-aarch64/tls-small-ld.d: Likewise. * testsuite/ld-aarch64/tls-tiny-ld.d: Likewise. * testsuite/ld-arc/tls_gd-01.d: Likewise. * testsuite/ld-cris/libdso-10.d: Likewise. * testsuite/ld-cris/libdso-2.d: Likewise. * testsuite/ld-cris/pic-gc-72.d: Likewise. * testsuite/ld-cris/pic-gc-73.d: Likewise. * testsuite/ld-cris/tls-gd-1.d: Likewise. * testsuite/ld-cris/tls-gd-1h.d: Likewise. * testsuite/ld-cris/tls-gd-2.d: Likewise. * testsuite/ld-cris/tls-gd-2h.d: Likewise. * testsuite/ld-cris/tls-ie-10.d: Likewise. * testsuite/ld-cris/tls-ie-11.d: Likewise. * testsuite/ld-cris/tls-ie-8.d: Likewise. * testsuite/ld-cris/tls-ie-9.d: Likewise. * testsuite/ld-cris/tls-ld-4.d: Likewise. * testsuite/ld-cris/tls-ld-5.d: Likewise. * testsuite/ld-cris/tls-ld-6.d: Likewise. * testsuite/ld-cris/tls-ld-7.d: Likewise. * testsuite/ld-cris/tls-ldgd-14.d: Likewise. * testsuite/ld-cris/tls-ldgd-15.d: Likewise. * testsuite/ld-cris/tls-ldgdx-14.d: Likewise. * testsuite/ld-cris/tls-ldgdx-15.d: Likewise. * testsuite/ld-cris/tls-local-54.d: Likewise. * testsuite/ld-cris/tls-local-60.d: Likewise. * testsuite/ld-cris/tls-local-61.d: Likewise. * testsuite/ld-cris/weakhiddso.d: Likewise. * testsuite/ld-elf/linkinfo1a.d: Likewise. * testsuite/ld-elf/linkinfo1b.d: Likewise. * testsuite/ld-elf/pr19617a.d: Likewise. * testsuite/ld-elfvsb/hidden2.d: Likewise. * testsuite/ld-frv/fdpic-pie-6.d: Likewise. * testsuite/ld-frv/fdpic-shared-2.d: Likewise. * testsuite/ld-frv/fdpic-shared-5.d: Likewise. * testsuite/ld-frv/fdpic-shared-6.d: Likewise. * testsuite/ld-frv/fdpic-shared-8.d: Likewise. * testsuite/ld-frv/fdpic-shared-local-2.d: Likewise. * testsuite/ld-frv/fdpic-shared-local-8.d: Likewise. * testsuite/ld-frv/tls-dynamic-2.d: Likewise. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/pr20830.d: Likewise. * testsuite/ld-ia64/merge1.d: Likewise. * testsuite/ld-ia64/merge2.d: Likewise. * testsuite/ld-ia64/merge3.d: Likewise. * testsuite/ld-ia64/merge4.d: Likewise. * testsuite/ld-ia64/merge5.d: Likewise. * testsuite/ld-ifunc/ifunc-1-local-x86.d: Likewise. * testsuite/ld-ifunc/ifunc-1-x86.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-3a-x86.d: Likewise. * testsuite/ld-ifunc/pr17154-i386-now.d: Likewise. * testsuite/ld-ifunc/pr17154-i386.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64.d: Likewise. * testsuite/ld-m68k/got-1.d: Likewise. * testsuite/ld-m68k/got-multigot-12-13-14-34-35-ok.d: Likewise. * testsuite/ld-m68k/got-multigot-14-ok.d: Likewise. * testsuite/ld-m68k/got-multigot-15-er.d: Likewise. * testsuite/ld-m68k/got-negative-12-13-14-34-ok.d: Likewise. * testsuite/ld-m68k/got-negative-12-13-14-35-er.d: Likewise. * testsuite/ld-m68k/got-negative-14-ok.d: Likewise. * testsuite/ld-m68k/got-negative-15-er.d: Likewise. * testsuite/ld-m68k/got-single-12-ok.d: Likewise. * testsuite/ld-m68k/got-single-13-er.d: Likewise. * testsuite/ld-m68k/got-xgot-12-13-14-15-34-35-ok.d: Likewise. * testsuite/ld-m68k/got-xgot-15-ok.d: Likewise. * testsuite/ld-m68k/tls-gd-1.d: Likewise. * testsuite/ld-m68k/tls-gd-2.d: Likewise. * testsuite/ld-m68k/tls-gd-ie-1.d: Likewise. * testsuite/ld-m68k/tls-ie-1.d: Likewise. * testsuite/ld-m68k/tls-ld-1.d: Likewise. * testsuite/ld-m68k/tls-ld-2.d: Likewise. * testsuite/ld-sh/shared-2.d: Likewise. * testsuite/ld-sh/tlsbin-2.d: Likewise. * testsuite/ld-sh/tlspic-2.d: Likewise. * testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-1.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise. * testsuite/ld-x86-64/ilp32-4.d: Likewise. * testsuite/ld-x86-64/load1c-nacl.d: Likewise. * testsuite/ld-x86-64/load1c.d: Likewise. * testsuite/ld-x86-64/load1d-nacl.d: Likewise. * testsuite/ld-x86-64/load1d.d: Likewise. * testsuite/ld-x86-64/pie3-nacl.d: Likewise. * testsuite/ld-x86-64/pie3.d: Likewise. * testsuite/ld-x86-64/pr14207.d: Likewise. * testsuite/ld-x86-64/pr19162.d: Likewise. * testsuite/ld-x86-64/pr19636-2d-nacl.d: Likewise. * testsuite/ld-x86-64/pr19636-2d.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1f.d: Likewise. * testsuite/ld-x86-64/pr20253-1j.d: Likewise. * testsuite/ld-x86-64/pr20253-1l.d: Likewise. * testsuite/ld-x86-64/pr20830a-now.d: Likewise. * testsuite/ld-x86-64/pr20830a.d: Likewise. * testsuite/ld-x86-64/pr20830b-now.d: Likewise. * testsuite/ld-x86-64/pr20830b.d: Likewise. * testsuite/ld-x86-64/pr21038a-now.d: Likewise. * testsuite/ld-x86-64/pr21038a.d: Likewise. * testsuite/ld-x86-64/pr21038b-now.d: Likewise. * testsuite/ld-x86-64/pr21038b.d: Likewise. * testsuite/ld-x86-64/pr21038c-now.d: Likewise. * testsuite/ld-x86-64/pr21038c.d: Likewise.
2017-07-25__tls_get_addr_opt stub eh_frame infoAlan Modra4-3/+37
Since the __tls_get_addr_opt stub saves LR and makes a call, eh_frame info should be generated to describe how to unwind through the stub. The patch also changes the way the backend iterates over stubs, from looking at all sections in stub_bfd to which all dynamic sections are attached as well, to iterating over the group list, which gets just the stub sections. Most binaries will have just one or two stub groups, so this is a little faster. bfd/ * elf64-ppc.c (struct map_stub): Add tls_get_addr_opt_bctrl. (stub_eh_frame_size): New function. (ppc_size_one_stub): Set group tls_get_addr_opt_bctrl. (group_sections): Init group tls_get_addr_opt_bctrl. (ppc64_elf_size_stubs): Update sizing and initialization of .eh_frame. Iteration over stubs via group list. (ppc64_elf_build_stubs): Iterate over stubs via group list. (ppc64_elf_finish_dynamic_sections): Update finalization of .eh_frame. ld/ * testsuite/ld-powerpc/tlsopt5.s: Add cfi. * testsuite/ld-powerpc/tlsopt5.d: Update. * testsuite/ld-powerpc/tlsopt5.wf: New file. * testsuite/ld-powerpc/powerpc.exp: Perform new tlsopt5 test.
generated by cgit v1.1 at 2024-11-22 21:08:45 +0000