aboutsummaryrefslogtreecommitdiff
path: root/ld/configure.tgt
AgeCommit message (Collapse)AuthorFilesLines
2024-07-25Add /usr/lib32 to the native search paths for FreeBSD systems.Nick Clifton1-1/+1
PR 31395
2024-07-13Revert "MIPS: Use N64 by default for mips*64*-*-linux-gnuabi64"Maciej W. Rozycki1-2/+2
This reverts commit d49f2dd78b08efa4e1ee51f5df5058846c2eb4fa. It was applied unapproved.
2024-07-12MIPS: Use N64 by default for mips*64*-*-linux-gnuabi64YunQiang Su1-2/+2
the ABI section of the triple explicitly asks for N64, and in fact GCC also does so. It can fix the test failure: FAIL: libdep test: did not get expected output from the linker with Debian's mipsisa64r6el-linux-gnuabi64 toolchain.
2024-01-08Add support for the aarch64-gnu target (GNU/Hurd on AArch64)Sergey Bugaev1-0/+5
Also recognized are aarch64-*-gnu tagrets, e.g. aarch64-pc-gnu or aarch64-unknown-gnu. The ld/emulparams/aarch64gnu.sh file is (for now) identical to aarch64fbsd.sh, or to aarch64linux.sh with Linux-specific logic removed; and mainly different from the generic aarch64elf.sh in that it does not set EMBEDDED=yes. Coupled with a corresponding GCC patch, this produces a toolchain that can sucessfully build working binaries targeting aarch64-gnu. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
2024-01-04Update year range in copyright notice of binutils filesAlan Modra1-1/+1
Adds two new external authors to etc/update-copyright.py to cover bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then updates copyright messages as follows: 1) Update cgen/utils.scm emitted copyrights. 2) Run "etc/update-copyright.py --this-year" with an extra external author I haven't committed, 'Kalray SA.', to cover gas testsuite files (which should have their copyright message removed). 3) Build with --enable-maintainer-mode --enable-cgen-maint=yes. 4) Check out */po/*.pot which we don't update frequently.
2023-12-12Support rodata in flash for more AVR devicesGeorg-Johann Lay1-1/+1
PR 31124 * Makefile.am (ALL_EMULATION_SOURCES): Add eavrxmega2_flmap.c and eavrxmega4_flmap.c. * Makefile.in: Regenerate. * configure.tgt: Add eavrxmega2_flmap and eavrxmega4_flmap to avr's targ_extra_emuls list. * emulparams/avrxmega2.sh (MAYBE_FLMAP): Define. * emulparams/avrxmega2_flmap.sh: New file. * emulparams/avrxmega4.sh (MAYBE_FLMAP): Define. * emulparams/avrxmega4_flmap.sh: New file. * scripttempl/avr.sc: Add support for HAVE_FLMAP.
2023-10-04ld: microblaze: ignore rwx segmentsNeal Frager1-0/+1
The linker will generate warnings if it is creating an executable stack or a segment with all three read, write and execute permissions. These settings are not appropriate for all targets including MicroBlaze. Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Michael J. Eager <eager@eagercon.com>
2023-09-25Revert "arc: Add new linker emulation and scripts for ARCv3 ISA."Claudiu Zissulescu1-19/+2
This reverts commit 4deb1ee57fdb711cac6f36fed75b3c8cb5112d99.
2023-09-25arc: Add new linker emulation and scripts for ARCv3 ISA.Claudiu Zissulescu1-2/+19
Add ARCv3's linker bits. Remove obsolete tests. ld/ xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com> * ld/Makefile.am: Add ARC64 targets. * ld/configure.tgt: Likewise. * ld/Makefile.in: Regenerate. * ld/emulparams/arc64elf32.sh: New file. * ld/emulparams/arc64elf64.sh: Likewise. * ld/emulparams/arc64linux32.sh: Likewise. * ld/emulparams/arc64linux64.sh: Likewise. * ld/scripttempl/elfarc.sc: Update stack and heap definitions. * ld/testsuite/ld-arc/got-weak.d: Deleted file. * ld/testsuite/ld-arc/got-weak.s: Likewise. Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
2023-08-30Revert "MIPS: Use 64-bit a ABI by default for `mipsisa64*-*-linux*' targets"Maciej W. Rozycki1-6/+4
This reverts commit 025e84f93566c8ced594ef48ddee1dec7e5b4cdd. It was applied unapproved.
2023-08-27MIPS: Use 64-bit a ABI by default for `mipsisa64*-*-linux*' targetsYunQiang Su1-4/+6
Following the arrangement in GCC select a 64-bit ABI by default, either n32 or n64, rather than o32 for `mipsisa64*-*-linux*' targets, just as with the corresponding `mips64*-*-linux*' targets.
2023-08-24kvx: bfd/config.bfd & ld/configure.tgtPaul Iannetta1-1/+2
bfd/ * config.bfd: Remove kvx_elf64_vec from targ_selvecs as it is already in targ_defvec. ld/ * configure.tgt: Split long line.
2023-08-16kvx: New port.Paul Iannetta1-0/+5
2023-07-28MIPS: Support `-gnuabi64' target triplet suffix for 64-bit Linux targetsYunQiang Su1-0/+10
Make the n64 ABI the default for 64-bit Linux targets specified with `-gnuabi64' suffix included in the target triplet, for configurations such as the Debian mips64el and mips64r6el ports. Adjust testsuite configuration accordingly. There are the following regressions with the new target triplet: mips64-linux-gnuabi64 +FAIL: readelf -S bintest mips64-linux-gnuabi64 +FAIL: MIPS reloc estimation 1 mips64el-linux-gnuabi64 +FAIL: readelf -S bintest mips64el-linux-gnuabi64 +FAIL: MIPS reloc estimation 1 The `readelf' issue comes from a difference in section headers produced that the `binutils/testsuite/binutils-all/readelf.s-64' pattern template does not match. While there has been a precedent it does not appear to me that there is a clear advantage from adding more and more variations to the template rather than forking the existing template into multiple ones for a more exact match. So this is best deferred to a separate discussion. The MIPS reloc estimation issue is an actual bug in `objdump', which discards a number of trailing entries from output here for n64 composed relocations: DYNAMIC RELOCATION RECORDS OFFSET TYPE VALUE 0000000000000000 R_MIPS_NONE *ABS* 0000000000000000 R_MIPS_NONE *ABS* and consequently `ld/testsuite/ld-mips-elf/reloc-estimate-1.d' does not match even though ELF output produced is correct according to `readelf': Relocation section '.rel.dyn' at offset 0x10400 contains 2 entries: Offset Info Type Sym. Value Sym. Name 000000000000 000000000000 R_MIPS_NONE Type2: R_MIPS_NONE Type3: R_MIPS_NONE 000000010000 000300001203 R_MIPS_REL32 0000000000010010 foo@@V2 Type2: R_MIPS_64 Type3: R_MIPS_NONE As a genuine bug this has to be handled separately. Co-Authored by: Maciej W. Rozycki <macro@orcam.me.uk> bfd/ * config.bfd: Add `mips64*el-*-linux*-gnuabi64' and `mips64*-*-linux*-gnuabi64' targets. binutils/ * testsuite/binutils-all/mips/mips.exp: Handle `*-*-*-gnuabi64' targets. * testsuite/binutils-all/objcopy.exp: Handle `mips64*-*-*-gnuabi64' targets. * testsuite/binutils-all/remove-relocs-01.d: Likewise. * testsuite/binutils-all/remove-relocs-04.d: Likewise. * testsuite/binutils-all/remove-relocs-05.d: Likewise. * testsuite/binutils-all/remove-relocs-06.d: Likewise. gas/ * configure.ac: Handle `mips64*-linux-gnuabi64' targets. * configure: Regenerate. * testsuite/gas/mips/compact-eh-eb-7.d: Handle `mips64*-*-*-gnuabi64' targets. * testsuite/gas/mips/compact-eh-el-7.d: Likewise. ld/ * configure.tgt: Add `mips64*el-*-linux-gnuabi64' and `mips64*-*-linux-gnuabi64' targets. * testsuite/ld-undefined/undefined.exp: Handle `mips64*-*-*-gnuabi64' targets. * testsuite/ld-mips-elf/attr-gnu-4-10.d: Likewise. * testsuite/ld-mips-elf/compact-eh6.d: Likewise. * testsuite/ld-mips-elf/mips-elf.exp: Handle `*-*-*-gnuabi64' targets.
2023-07-28Revert "MIPS: support mips*64 as CPU and gnuabi64 as ABI"Maciej W. Rozycki1-10/+2
This reverts commit 32f1c80375ebe8ad25d9805ee5889f0006c51e59. It had two unrelated changes lumped together, one of which changed the meaning of the `mipsisa64*-*-linux*' target triplets, which was not properly evaluated.
2023-04-23MIPS: support mips*64 as CPU and gnuabi64 as ABIYunQiang Su1-2/+10
For MIPS64r6 ports, Debian as an example, `mipsisa64r6el` is used as the cpu name in triple. Let's recognize them by `mips*64*(el)`. For 64bit Ports, like Debian's mips64el and mips64r6el ports, `gnuabi64` is used as the abi section. Let's use N64 abi by default for the triple with gnuabi64.
2023-03-16configure: add new target aarch64-*-nto*Clément Chigot1-0/+3
This target has its own ld emulation based on aarch64elf.em.
2023-01-25ld: Add pdb support to aarch64-w64-mingw32Mark Harmstone1-1/+1
This extends PDB support to the aarch64 PE targets. The changes to the test files are just to make it so they can be assembled as either x86, x86_64, or aarch64, mainly by changing the comment style. The only actual code change here is in adding the architecture constants to pdb.c.
2023-01-10Add aarch64-w64-mingw32 targetMark Harmstone1-2/+2
This adds a mingw target for aarch64, including windres and dlltool. Note that the old value of jmp_aarch64_bytes was wrong, and this does the same thing as MSVC does.
2023-01-05Add an extra emulation called arm64pe to the aarch64pe emulation.Nick Clifton1-0/+1
2023-01-02obsolete target tidyAlan Modra1-15/+0
Delete a few files only used for obsolete targets, and tidy config, xfails and other pieces of support specific to those targets. And since I was editing target triplets in test files, fix the nm alpha-linuxecoff fails.
2023-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
2022-12-26Add support for x86_64-*-gnu-* targets to build x86_64 gnumach/hurdFlavio Cruz1-0/+5
2022-12-23pdb build fixesAlan Modra1-7/+7
Enable compilation of ld/pdb.c just for x86, as is done for bfd/pdb.c. This reduces the size of ld and is necessary with the following patches that call a COFF-only bfd function from ld/pdb.c. Without it we'd break every non-COFF target build.
2022-11-03V850 Linker: do not complain about RWX segments.Nick Clifton1-2/+3
PR 29748 * configure.tgt (ac_default_ld_warn_rwx_segments): Set to 0 for the V850.
2022-10-19aarch64-pe support for LD, GAS and BFDJedidiah Thompson1-1/+5
Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE. Based on initial work by Jedidiah Thompson Co-authored-by: Jedidiah Thompson <wej22007@outlook.com> Co-authored-by: Zac Walker <zac.walker@linaro.org>
2022-07-29ld: Extend ac_default_ld_warn_rwx_segments to all SPARC targets [PR29411]Rainer Orth1-3/+3
As discussed in PR ld/29411, the ld warning [...] has a LOAD segment with RWX permissions needs to be disabled on all SPARC targets, not just Solaris/SPARC: the .plt section is required to be RWX by the 32-bit SPARC ELF psABI and the 64-bit SPARC Compliance Definition 2.4.1. Given that ld only supports SPARC ELF targets, this patch implements this. Tested on sparc64-unknown-linux-gnu and sparc-sun-solaris2.11. 2022-07-28 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> ld: PR ld/29411 * configure.tgt (ac_default_ld_warn_rwx_segments): Extend to all sparc targets. Expand comment.
2022-07-26Stop the linker from complaining about RWX segments in sparc-solaris targets.Nick Clifton1-0/+1
PR 29411 * configure.tgt (ac_default_ld_warn_rwx_segments): Disable for sparc-solaris configurations.
2022-06-27Disable execstack and rwx segments warnings for MIPS targets.Nick Clifton1-5/+36
PR 29263 * configure.ac: Move HPPA specific code from here... * configure.tgt: ... to here. Add similar code for MIPS. Move code for CRIS, MIPS and HPPA to block at start of file. * configure: Regenerate.
2022-06-27drop XC16x bitsJan Beulich1-3/+0
Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved the architecture from the "obsolete but still available" to the "obsolete / support removed" list in config.bfd, making the architecture impossible to enable (except maybe via "enable everything" options"). Note that I didn't touch */po/*.po{,t} on the assumption that these would be updated by some (half)automatic means.
2022-05-27ld: cris*-elf: Default to --no-warn-rwx-segmentHans-Peter Nilsson1-0/+5
ld: configure.tgt (cris-*-*, crisv32-*-* sans *-aout and *-linux): Unless specified through the --enable-* -option, default to --no-warn-rwx-segment. Change-Id: I846bcd3e6762da807b17215a9fe337461ea0d710
2022-03-24x86: drop L1OM/K1OM support from ldJan Beulich1-12/+12
This was only rudimentary support anyway; none of the sub-architecture specific insns were ever supported.
2022-01-22Adjust default page sizes for haiku arm.Alexander von Gluck IV1-1/+1
* configure.tgt (arm-haiku): Fix typo. * emulparams/armelf_haiku.su (MAXPAGESIZE): Use the default value. (COMMONPAGESIZE): Likewise.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-12-21Obsolete m32c-rtems and m32r-rtemsJoel Sherrill1-2/+2
2020-12-20 Joel Sherrill <joel@rtems.org> bfd/ * config.bfd (m32c-*-rtems*): Remove target. ld/ * configure.tgt (m32c-*-rtems*): Remove target. * configure.tgt (m32r-*-rtems*): Remove target.
2021-10-24LoongArch ld supportliuzhensong1-0/+4
2021-10-22 Chenghua Xu <xuchenghua@loongson.cn> Zhensong Liu <liuzhensong@loongson.cn> Weinan Liu <liuweinan@loongson.cn> Xiaolin Tang <tangxiaolin@loongson.cn> ld/ * Makefile.am: Add LoongArch. * NEWS: Mention LoongArch support. * configure.tgt: Add LoongArch. * emulparams/elf32loongarch-defs.sh: New. * emulparams/elf32loongarch.sh: Likewise. * emulparams/elf64loongarch-defs.sh: Likewise. * emulparams/elf64loongarch.sh: Likewise. * emultempl/loongarchelf.em: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. ld/testsuite/ * ld-loongarch-elf/disas-jirl.d: New. * ld-loongarch-elf/disas-jirl.s: Likewise. * ld-loongarch-elf/jmp_op.d: Likewise. * ld-loongarch-elf/jmp_op.s: Likewise. * ld-loongarch-elf/ld-loongarch-elf.exp: Likewise. * ld-loongarch-elf/macro_op.d: Likewise. * ld-loongarch-elf/macro_op.s: Likewise. * ld-loongarch-elf/syscall-0.s: Likewise. * ld-loongarch-elf/syscall-1.s: Likewise. * ld-loongarch-elf/syscall.d: Likewise. * ld-srec/srec.exp: Add LoongArch. * ld-unique/pr21529.d: Likewise.
2021-09-02Add support for the haiku operating system. These are the os support ↵Alexander von Gluck IV1-0/+20
patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time.
2021-08-13ns32k configuryAlan Modra1-1/+1
Since ns32k-netbsd is as yet not removed, just marked obsolete, the target should still be accepted with --enable-obsolete. I also enabled ns32k-openbsd in ld since there doesn't seem to be a good reason why that target is not supported there but is elsewhere. bfd/ * config.bfd: Allow ns32k-netbsd. ld/ * configure.tgt: Allow ns32k-openbsd.
2021-08-11Deprecate a.out support for NetBSD targets.John Ericson1-23/+21
As discussed previously, a.out support is now quite deprecated, and in some cases removed, in both Binutils itself and NetBSD, so this legacy default makes little sense. `netbsdelf*` and `netbsdaout*` still work allowing the user to be explicit about there choice. Additionally, the configure script warns about the change as Nick Clifton requested. One possible concern was the status of NetBSD on NS32K, where only a.out was supported. But per [1] NetBSD has removed support, and if it were to come back, it would be with ELF. The binutils implementation is therefore marked obsolete, per the instructions in the last message. With that patch and this one applied, I have confirmed the following: --target=i686-unknown-netbsd --target=i686-unknown-netbsdelf builds completely --target=i686-unknown-netbsdaout properly fails because target is deprecated. --target=vax-unknown-netbsdaout builds completely except for gas, where the target is deprecated. [1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html --- bfd/config.bfd | 43 +++++++++++++-------- bfd/configure.ac | 5 +-- binutils/testsuite/binutils-all/nm.exp | 2 +- binutils/testsuite/lib/binutils-common.exp | 7 +--- config/picflag.m4 | 4 +- gas/configure.tgt | 9 +++-- gas/testsuite/gas/arm/blx-bl-convert.d | 2 +- gas/testsuite/gas/arm/blx-local-thumb.d | 2 +- gas/testsuite/gas/sh/basic.exp | 2 +- gdb/configure.host | 34 +++++++---------- gdb/configure.tgt | 2 +- gdb/testsuite/gdb.asm/asm-source.exp | 6 +-- intl/configure | 2 +- ld/configure.tgt | 44 +++++++++++----------- ld/testsuite/ld-arm/arm-elf.exp | 4 +- ld/testsuite/ld-elf/elf.exp | 2 +- ld/testsuite/ld-elf/shared.exp | 4 +- libiberty/configure | 4 +-
2021-07-21Remove `netbsdpe` supportJohn Ericson1-3/+0
netbsdpe was deprecated in c2ce831330e10dab4703094491f80b6b9a5c2289. Since then, a release has passed (2.37), and it was marked obselete in 5c9cbf07f3f972ecffe13d858010b3179df17b32. Unless I am mistaken, that means we can now remove support altogether. All branches in the "active" code are remove, and the target is additionally marked as obsolete next to the other removed ones for libbfd and gdb. Per [1] from the NetBSD toolchain list, PE/COFF support was removed a decade ago. Furthermore, the sole mention of this target in the binutils commit history was in 2002. Together, I'm led to believe this target hasn't seen much attention in quite a while. [1]: https://mail-index.netbsd.org/tech-toolchain/2021/06/16/msg003996.html bfd/ * config.bfd: Remove netbsdpe entry. binutils/ * configure.ac: Remove netbsdpe entry. * testsuite/lib/binutils-common.exp (is_pecoff_format): Likewise. * configure: Regenerate. gas/ * configure.tgt: Remove netbsdpe entry. gdb/ * configure.tgt: Add netbsdpe to removed targets. ld/ * configure.tgt: Remove netbsdpe entry. * testsuite/ld-bootstrap/bootstrap.exp: Likewise.
2021-02-09Remove arm-symbianelfAlan Modra1-1/+0
* configure.ac: Delete arm*-*-symbianelf* entry. * configure: Regenerate. bfd/ * config.bfd (arm*-*-symbianelf*): Move from obsolete to removed. * configure.ac: Delete symbian entries. * elf-bfd.h (enum elf_target_os): Delete is_symbian. * elf32-arm.c: Remove symbian support. Formatting. * targets.c: Delete symbian entries. * configure: Regenerate. binutils/ * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Remove symbianelf. gas/ * Makefile.am (TARG_ENV_HFILES): Remove config/te-symbian.h. * config/tc-arm.c (elf32_arm_target_format): Remove TE_SYMBIAN support. * config/te-symbian.h: Delete. * configure.tgt: Remove arm-*-symbianelf*. * testsuite/gas/arm/arch4t-eabi.d: Don't mention symbianelf in target selection. * testsuite/gas/arm/arch4t.d: Likewise. * testsuite/gas/arm/got_prel.d: Likewise. * testsuite/gas/arm/mapdir.d: Likewise. * testsuite/gas/arm/mapmisc.d: Likewise. * testsuite/gas/arm/mapsecs.d: Likewise. * testsuite/gas/arm/mapshort-eabi.d: Likewise. * testsuite/gas/arm/thumb-eabi.d: Likewise. * testsuite/gas/arm/thumb.d: Likewise. * testsuite/gas/arm/thumbrel.d: Likewise. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove earmsymbian.c. Don't include symbian dep file. * configure.tgt: Remove arm*-*-symbianelf* entry. * emulparams/armsymbian.sh: Delete. * ld.texi: Don't mention symbian. * scripttempl/armbpabi.sc: Delete. * testsuite/ld-arm/symbian-seg1.d: Delete. * testsuite/ld-arm/symbian-seg1.s: Delete. * testsuite/ld-arm/arm-elf.exp: Don't run symbian-seg1. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2021-02-01Add Genode target supportEmery Hemingway1-4/+4
* configure.tgt: Add *-*-genode* as a target for AArch64 and x86.
2021-01-06RISC-V: Implement support for big endian targets.Marcus Comstedt1-4/+21
RISC-V instruction/code is always little endian, but data might be big-endian. Therefore, we can not use the original bfd_get/bfd_put to get/put the code for big endian targets. Add new riscv_get_insn and riscv_put_insn to always get/put code as little endian can resolve the problem. Just remember to update them once we have supported the 48-bit/128-bit instructions in the future patches. bfd/ * config.bfd: Added targets riscv64be*-*-*, riscv32be*-*-* and riscvbe*-*-*. Also added riscv_elf[32|64]_be_vec. * configure.ac: Handle riscv_elf[32|64]_be_vec. * configure: Regenerate. * elfnn-riscv.c: Include <limits.h> and define CHAR_BIT for riscv_is_insn_reloc. (riscv_get_insn): RISC-V instructions are always little endian, but bfd_get may be used for big-endian, so add new riscv_get_insn to handle the insturctions. (riscv_put_insn): Likewsie. (riscv_is_insn_reloc): Check if we are relocaing an instruction. (perform_relocation): Call riscv_is_insn_reloc to decide if we should use riscv_[get|put]_insn or bfd_[get|put]. (riscv_zero_pcrel_hi_reloc): Use riscv_[get|put]_insn, bfd_[get|put]l32 or bfd_[get|put]l16 for code. (riscv_elf_relocate_section): Likewise. (riscv_elf_finish_dynamic_symbol): Likewise. (riscv_elf_finish_dynamic_sections): Likewise. (_bfd_riscv_relax_call): Likewise. (_bfd_riscv_relax_lui): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_pc): Likewise. (riscv_elf_object_p): Handled for big endian. (TARGET_BIG_SYM, TARGET_BIG_NAME): Defined. * targets.c: Add riscv_elf[32|64]_be_vec. (_bfd_target_vector): Likewise. gas/ * config/tc-riscv.c (riscv_target_format): Add elf64-bigriscv and elf32-bigriscv. (install_insn): Always write instructions as little endian. (riscv_make_nops): Likewise. (md_convert_frag_branch): Likewise. (md_number_to_chars): Write data in target endianness. (options, md_longopts): Add -mbig-endian and -mlittle-endian options. (md_parse_option): Handle the endian options. * config/tc-riscv.h: Only define TARGET_BYTES_BIG_ENDIAN if not already defined. * configure.tgt: Added riscv64be*, riscv32be*, riscvbe*. ld/ * configure.tgt: Added riscvbe-*-*, riscv32be*-*-*, riscv64be*-*-*, riscv32be*-*-linux*, and riscv64be*-*-linux*. * Makefile.am: Added eelf32briscv.c, eelf32briscv_ilp32f.c and eelf32briscv_ilp32.c. * Makefile.in: Regenerate. * emulparams/elf32briscv.sh: Added. * emulparams/elf32briscv_ilp32.sh: Likewise. * emulparams/elf32briscv_ilp32f.sh: Likewise. * emulparams/elf64briscv.sh: Likewise. * emulparams/elf64briscv_lp64.sh: Likewise. * emulparams/elf64briscv_lp64f.sh: Likewise.
2021-01-01PR27116, Spelling errors found by Debian style checkerAlan Modra1-1/+1
PR 27116 bfd/ * xcofflink.c: Correct spelling in comments. binutils/ * coffgrok.c (do_type): Correct spelling of auxiliary in errors. * doc/binutils.texi: Correct grammar. * readelf.c (process_version_sections): Correct spelling of auxiliary in warning. * testsuite/binutils-all/vax/objdump.exp: Comment grammar fix. config/ * override.m4: Correct comment grammar. gas/ * config/tc-i386.c: Correct comment spelling. * config/tc-riscv.c: Likewise. * config/tc-s390.c: Correct comment grammar. * doc/c-i386.texi: Correct spelling. * doc/c-s390.texi: Correct grammar. gold/ * tilegx.cc: Correct comment spelling. gprof/ * README: Correct grammar. * gprof.texi: Likewise. include/ * coff/internal.h: Correct comment spelling. * coff/sym.h: Likewise. * opcode/aarch64.h: Likewise. ld/ * configure.tgt: Correct comment grammar. * emultempl/m68hc1xelf.em: Likewise. * ld.texi: Correct grammar.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-10-06PR26667, Add powerpc64le-*-freebsd* supportBrandon Bergren1-0/+4
PR 26667 bfd/ * config.bfd: Add powerpc64le-*-freebsd*. * configure.ac: Add powerpc_elf64_fbsd_le_vec. * elf64-ppc.c (TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Define for freebsd. * targets.c (powerpc_elf64_fbsd_le_vec): Declare. (_bfd_target_vector): Add it. * configure: Regenerate. ld/ * Makefile.am (ALL_64_EMULATION_SOURCES): Add eelf64lppc_fbsd.c. Include $(DEPDIR)/eelf64lppc_fbsd.Pc. * configure.tgt: Add powerpc64le-*-freebsd*. * emulparams/elf64lppc_fbsd.sh: New file. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2020-07-09Remove powerpc PE supportAlan Modra1-6/+0
Plus some leftover powerpc lynxos support. bfd/ * coff-ppc.c: Delete. * pe-ppc.c: Delete. * pei-ppc.c: Delete. * Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Remove PE PPC. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags): Remove PPCMAGIC code. (coff_write_object_contents): Remove PPC_PE code. * config.bfd: Move powerpcle-pe to removed targets. * configure.ac: Remove powerpc PE entries. * libcoff-in.h (ppc_allocate_toc_section): Delete. (ppc_process_before_allocation): Delete. * peXXigen.c: Remove POWERPC_LE_PE code and comments. * targets.c: Remove powerpc PE vectors. * po/SRC-POTFILES.in: Regenerate. * libcoff.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils/ * dlltool.c: Remove powerpc PE support and comments. * configure.ac: Remove powerpc PE dlltool config. * configure: Regenerate. gas/ * config/obj-coff.h: Remove TE_PE support. * config/tc-ppc.c: Likewise. * config/tc-ppc.h: Likewise. * configure.tgt: Remove powerpc PE and powerpc lynxos. * testsuite/gas/cfi/cfi.exp (cfi-common-6): Remove powerpc PE condition. * testsuite/gas/macros/macros.exp: Don't xfail powerpc PE. include/ * coff/powerpc.h: Delete. ld/ * emulparams/ppcpe.sh: Delete. * scripttempl/ppcpe.sc: Delete. * emulparams/ppclynx.sh: Delete. * Makefile.am (ALL_EMULATION_SOURCES): Remove ppc PE and lynxos. * configure.tgt: Likewise. * emultempl/beos.em: Remove powerpc PE support. * emultempl/pe.em: Likewise. * po/BLD-POTFILES.in: Regenerate. * Makefile.in: Regenerate.
2020-06-30Remove x86 NaCl target supportH.J. Lu1-17/+2
NaCl has been deprecated: https://developer.chrome.com/native-client/migration and NaCl will completely disappear in 2021: https://lists.llvm.org/pipermail/llvm-dev/2020-April/141107.html Remove x86 NaCl target support from bfd, binutils, gas and ld. bfd/ * archures.c (bfd_mach_i386_nacl): Removed. (bfd_mach_i386_i386_nacl): Likewise. (bfd_mach_x86_64_nacl): Likewise. (bfd_mach_x64_32_nacl): Likewise. * config.bfd: Remove *-*-nacl* targets. * configure.ac: Remove x86 NaCl target vectors. * cpu-i386.c (bfd_arch_i386_onebyte_nop_fill): Removed. (bfd_x64_32_nacl_arch): Likewise. (bfd_x86_64_nacl_arch): Likewise. (bfd_i386_nacl_arch): Likewise. (bfd_x64_32_arch_intel_syntax): Updated. * elf32-i386.c: Don't include "elf-nacl.h". (elf_i386_nacl_plt): Removed. (elf_i386_nacl_plt0_entry): Likewise. (elf_i386_nacl_plt_entry): Likewise. (elf_i386_nacl_pic_plt0_entry): Likewise. (elf_i386_nacl_pic_plt_entry): Likewise. (elf_i386_nacl_eh_frame_plt): Likewise. (elf_i386_nacl_plt): Likewise. (elf32_i386_nacl_elf_object_p): Likewise. (elf_i386_get_synthetic_symtab): Updated. (elf_i386_link_setup_gnu_properties): Likewise. * elf64-x86-64.c: Don't include "elf-nacl.h". (elf_x86_64_nacl_plt): Removed. (elf64_x86_64_nacl_elf_object_p): Likewise. (elf_x86_64_nacl_plt0_entry): Likewise. (elf_x86_64_nacl_plt_entry): Likewise. (elf_x86_64_nacl_eh_frame_plt): Likewise. (elf_x86_64_nacl_plt): Likewise. (elf32_x86_64_nacl_elf_object_p): Likewise. (elf_x86_64_get_synthetic_symtab): Updated. (elf_x86_64_link_setup_gnu_properties): Likewise. * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Likewise. * targets.c: Remove x86 NaCl target vectors. * bfd-in2.h: Regenerated. * configure: Likewise. binutils/ * NEWS: Mention x86 NaCl target support removal. * dwarf.c (init_dwarf_regnames_by_bfd_arch_and_mach): Remove x86 NaCl target support. * testsuite/binutils-all/elfedit-1.d: Likewise. * testsuite/binutils-all/i386/i386.exp: Likewise. * testsuite/binutils-all/x86-64/objects.exp: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/x86-64.exp: Likewise. gas/ * NEWS: Mention x86 NaCl target support removal. * config/tc-i386.c: Remove x86 NaCl target support. * config/tc-i386.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/i386/i386.exp: Likewise. * testsuite/gas/i386/iamcu-1.d: Likewise. * testsuite/gas/i386/iamcu-2.d: Likewise. * testsuite/gas/i386/iamcu-3.d: Likewise. * testsuite/gas/i386/iamcu-4.d: Likewise. * testsuite/gas/i386/iamcu-5.d: Likewise. * testsuite/gas/i386/k1om.d: Likewise. * testsuite/gas/i386/l1om.d: Likewise. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c. Remove x86 NaCl dep files. * NEWS: Mention x86 NaCl target support removal. * configure.tgt: Remove x86 NaCl target support. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/elf.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-i386/align-branch-1.d: Likewise. * testsuite/ld-i386/export-class.exp: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-i386/load1.d: Likewise. * testsuite/ld-i386/pie1.d: Likewise. * testsuite/ld-i386/pr12570a.d: Likewise. * testsuite/ld-i386/pr12570b.d: Likewise. * testsuite/ld-i386/pr19636-1d.d: Likewise. * testsuite/ld-i386/pr19636-1l.d: Likewise. * testsuite/ld-i386/pr19636-2c.d: Likewise. * testsuite/ld-i386/pr19636-2d.d: Likewise. * testsuite/ld-i386/pr19636-2e.d: Likewise. * testsuite/ld-i386/pr20244-1a.d: Likewise. * testsuite/ld-i386/pr20244-1b.d: Likewise. * testsuite/ld-i386/pr20244-2a.d: Likewise. * testsuite/ld-i386/pr20244-2b.d: Likewise. * testsuite/ld-i386/pr20244-2c.d: Likewise. * testsuite/ld-i386/pr20244-4a.d: Likewise. * testsuite/ld-i386/pr20244-4b.d: Likewise. * testsuite/ld-i386/pr21884.d: Likewise. * testsuite/ld-ifunc/binutils.exp: Likewise. * testsuite/ld-ifunc/ifunc-10-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-10-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-11-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-11-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-12-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-12-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-13-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-13-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14c-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14c-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14d-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14d-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14e-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14e-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14f-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14f-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-15-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-15-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-16-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-16-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-16-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-17a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-17a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-17b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-17b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-19a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-19a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-19b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-19b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-20-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-20-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-21-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-6a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-6a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-6b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-6b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-7a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-7a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-7b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-7b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-8-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-8-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-9-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-9-x86-64.d: Likewise. * testsuite/ld-ifunc/pr17154-i386-now.d: Likewise. * testsuite/ld-ifunc/pr17154-i386.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64.d: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-x86-64/align-branch-1.d: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Likewise. * testsuite/ld-x86-64/line.exp: Likewise. * testsuite/ld-x86-64/load1a.d: Likewise. * testsuite/ld-x86-64/load1b.d: Likewise. * testsuite/ld-x86-64/load1c.d: Likewise. * testsuite/ld-x86-64/load1d.d: Likewise. * testsuite/ld-x86-64/pie3.d: Likewise. * testsuite/ld-x86-64/pr18160.d: Likewise. * testsuite/ld-x86-64/pr19013-x32.d: Likewise. * testsuite/ld-x86-64/pr19013.d: Likewise. * testsuite/ld-x86-64/pr19636-2d.d: Likewise. * testsuite/ld-x86-64/pr19636-2l.d: Likewise. * testsuite/ld-x86-64/pr20253-1b.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1f.d: Likewise. * testsuite/ld-x86-64/pr20253-1h.d: Likewise. * testsuite/ld-x86-64/pr20253-1j.d: Likewise. * testsuite/ld-x86-64/pr20253-1l.d: Likewise. * testsuite/ld-x86-64/pr21884.d: Likewise. * testsuite/ld-x86-64/pr22393-3a.rd: Likewise. * testsuite/ld-x86-64/pr22393-3b.rd: Likewise. * testsuite/ld-x86-64/tlsgd10.dd: Likewise. * testsuite/ld-x86-64/tlsgd5.dd: Likewise. * testsuite/ld-x86-64/tlsgd8.dd: Likewise. * testsuite/ld-x86-64/x86-64.exp: Likewise. * emulparams/elf32_x86_64_nacl.sh: Removed. * emulparams/elf_i386_nacl.sh: Likewise. * emulparams/elf_x86_64_nacl.sh: Likewise. * testsuite/ld-i386/emit-relocs-nacl.rd: Likewise. * testsuite/ld-i386/load1-nacl.d: Likewise. * testsuite/ld-i386/pie1-nacl.d: Likewise. * testsuite/ld-i386/plt-nacl.pd: Likewise. * testsuite/ld-i386/plt-pic-nacl.pd: Likewise. * testsuite/ld-i386/pr17709-nacl.rd: Likewise. * testsuite/ld-i386/pr19636-1d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2c-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2e-nacl.d: Likewise. * testsuite/ld-i386/pr19827-nacl.rd: Likewise. * testsuite/ld-i386/pr21884-nacl.d: Likewise. * testsuite/ld-i386/pr21884-nacl.t: Likewise. * testsuite/ld-i386/tlsbin-nacl.rd: Likewise. * testsuite/ld-i386/tlsbin2-nacl.rd: Likewise. * testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsnopic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic2-nacl.rd: Likewise. * testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise. * testsuite/ld-x86-64/load1a-nacl.d: Likewise. * testsuite/ld-x86-64/load1b-nacl.d: Likewise. * testsuite/ld-x86-64/load1c-nacl.d: Likewise. * testsuite/ld-x86-64/load1d-nacl.d: Likewise. * testsuite/ld-x86-64/pie3-nacl.d: Likewise. * testsuite/ld-x86-64/plt-nacl.pd: Likewise. * testsuite/ld-x86-64/pr17709-nacl.rd: Likewise. * testsuite/ld-x86-64/pr19013-nacl.d: Likewise. * testsuite/ld-x86-64/pr19636-2d-nacl.d: Likewise. * testsuite/ld-x86-64/pr19827-nacl.rd: Likewise. * testsuite/ld-x86-64/pr21884-nacl.d: Likewise. * testsuite/ld-x86-64/pr21884-nacl.t: Likewise. * testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin2-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.pd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic2-nacl.rd: Likewise. * Makefile.in: Regenerated. * po/BLD-POTFILES.in: Likewise.
2020-06-16Really remove tic30-aout supportAlan Modra1-3/+0
bfd/ * aout-tic30.c: Delete file. * Makefile.am (BFD32_BACKENDS): Remove aout-tic30.lo. (BFD32_BACKENDS_CFILES): Remove aout-tic30.c. * config.bfd (c30-*-*aout*, tic30-*-*aout*): Remove entry. (xc16x-*-elf): Sort properly. * configure.ac: Remove tic30_aout_vec. * targets.c: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. gas/ * config/tc-tic30.h: Remove OBJ_AOUT support. * configure.tgt: Delete tic30-*-*aout* entry. ld/ * emulparams/tic30aout.sh: Delete file. * scripttempl/tic30aout.sc: Delete file. * Makefile.am: Remove etic30aout.c from ALL_EMULATION_SOURCES and delete dependency. * configure.tgt: Delete tic30-*-*aout* entry. * testsuite/ld-scripts/sane1.d: Delete tic30-*-aout mention. * testsuite/ld-scripts/segment-start.d: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2020-05-28ld: Enable --warn-textrel by default for Linux/x86 targetsH.J. Lu1-1/+4
* configure.tgt (ac_default_ld_textrel_check): Set to if unset for Linux/x86 targets.
generated by cgit v1.1 at 2025-02-19 14:03:02 +0000