Age | Commit message (Collapse) | Author | Files | Lines |
|
ChangeLog:
* configure.ac: Add --enable-default-compressed-debug-sections-algorithm.
* configure: Regenerate.
gas/ChangeLog:
* NEWS: Document the new option.
* as.c (flag_compress_debug): Set default algorithm based
on the configure option.
* configure.ac: Add --enable-default-compressed-debug-sections-algorithm.
* configure: Regenerate.
* config.in: Likewise.
ld/ChangeLog:
* NEWS: Document the new option.
* configure.ac: Add --enable-default-compressed-debug-sections-algorithm.
* configure: Regenerate.
* config.in: Likewise.
* ldmain.c: Set default algorithm based
on the configure option.
|
|
PR29397 PR29563: Add new configure option --with-zstd which defaults to
auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
zstd compressed debug sections for most tools.
* bfd: for addr2line, objdump --dwarf, gdb, etc
* gas: support --compress-debug-sections=zstd
* ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
* objcopy: support ELFCOMPRESS_ZSTD input for
--decompress-debug-sections and --compress-debug-sections=zstd
* gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd
symbols, so gdb has to link against -lzstd in this patch.
If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We
can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
is too heavyweight, so don't do it for now.
```
% ld/ld-new a.o
ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
% ld/ld-new a.o --compress-debug-sections=zstd
ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support
% binutils/objcopy --compress-debug-sections=zstd a.o b.o
binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support
% binutils/objcopy b.o --decompress-debug-sections
binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
```
|
|
sbrk hasn't been used in binutils/ or ld/ for quite some time (so the
PR was fixed a while ago). Tidy up configury.
PR 17122
binutils/
* configure.ac: Don't check for sbrk.
* sysdep.h (sbrk): Don't supply fallback declaration.
* config.in: Regenerate.
* configure: Regenerate.
ld/
* configure.ac: Don't check for sbrk.
* config.in: Regenerate.
* configure: Regenerate.
|
|
Generate a .note.package FDO package metadata ELF note, following
the spec: https://systemd.io/ELF_PACKAGE_METADATA/
If the jansson library is available at build time (and it is explicitly
enabled), link ld to it, and use it to validate that the input is
correct JSON, to avoid writing garbage to the file. The
configure option --enable-jansson has to be used to explicitly enable
it (error out when not found). This allows bootstrappers (or others who
are not interested) to seamlessly skip it without issues.
|
|
segments. Add tests, options to disabke and configure switches to choose defaults.
|
|
gas already has this. Here it enables checking hash table type passed
to elf_link_hash_lookup and elf_link_hash_traverse.
bfd/
* elf-bfd.h (ENABLE_CHECKING): Define.
(elf_link_hash_lookup): Abort if wrong type of hash table.
(elf_link_hash_traverse): Likewise.
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
binutils/
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
ld/
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
opcodes/
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
|
|
* configure.ac: Move initfini-array arg handling earlier. Don't
check for string.h, strings.h, stdlib.h, or locale.h. Do check
for inttypes.h, stdint.h, sys/types.h. Don't check for
setlocale, free, getev or strstr.
(AC_ISC_POSIX): Don't invoke.
* sysdep.h: Include string.h and stdlib.h unconditionally. Test
HAVE_SYS_TYPE_H and HAVE_SYS_STAT_H. Remove strstr, free and
getenv fallback declarations.
* ld.h: Don't test HAVE_LOCALE_H.
* ldmain.c: Don't test HAVE_SETLOCALE.
* config.in: Regenerate.
* configure: Regenerate.
|
|
script <NAME> if an undefined symbol or unfound library error is encountered.
PR 26626
* ldmain.c (undefined_symbol): If an error handlign script is
available, call it.
* ldfile.c (error_handling_script): Declare.
(ldfile_open_file): If a library cannot be found and an error
handling script is available, call it.
* ldmain.h (error_handling_script): Prototype.
* ldlex.h (OPTION_ERROR_HANDLING_SCRIPT): Define.
* lexsup.c (ld_options): Add --error-handling-script.
(parse_args): Add support for --errror-handling-script.
* ld.texi: Document the new feature.
* configure.ac: Add --error-handling-script option to disable
support for the new feature.
* NEWS: Mention the new feature.
* config.in: Regenerate.
* configure: Regenerate.
|
|
PR 26328
* configure.ac: AC_CHECK_DECLS asprintf.
* configure: Regenerate.
* config.in: Regenerate.
|
|
This unfortunately means conditionalizing out all the libctf code, but
the result is not too unbearably ugly, if a bit repetitive. I have
stubbed out code in the !ENABLE_LIBCTF path to avoid extra redundant
ifdefs where it seems that might be helpful. (The stubs are not too
disruptive, but I've tried to keep them on one line where possible to
avoid filling up the screen with stubs that nobody would care about.
If this is too much of a coding style violation I can change it.)
Changes since v2: use GCC_ENABLE rather than repeating all the
AC_ARG_ENABLE stuff over and over again.
ld/
* configure.ac [--enable-libctf]: New, default yes.
Set ENABLE_LIBCTF accordingly.
* Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* ldlang.c (ctf_output): Conditionalize on ENABLE_LIBCTF.
(ldlang_open_ctf): Likewise.
(lang_merge_ctf): Likewise.
(ldlang_ctf_apply_strsym): Likewise.
(lang_write_ctf): Likewise.
(ldlang_write_ctf_late): Likewise.
(ldlang_open_ctf) [!ENABLE_LIBCTF]: Warn about the presence of CTF
sections.
(lang_merge_ctf) [!ENABLE_LIBCTF]: New stub.
(ldlang_ctf_apply_strsym) [!ENABLE_LIBCTF]: Likewise.
(lang_write_ctf) [!ENABLE_LIBCTF]: Likewise.
(ldlang_write_ctf_late) [!ENABLE_LIBCTF]: Likewise.
* ldelfgen.c (ldelf_emit_ctf_early): Conditionalize on
ENABLE_LIBCTF.
(struct ctf_strsym_iter_cb_arg): Likewise.
(ldelf_ctf_strtab_iter_cb): Likewise.
(ldelf_ctf_symbols_iter_cb): Likewise.
(ldelf_examine_strtab_for_ctf): Likewise.
(ldelf_emit_ctf_early) [!ENABLE_LIBCTF]: New stub.
(ldelf_examine_strtab_for_ctf) [!ENABLE_LIBCTF]: New stub.
binutils/
* configure.ac [--enable-libctf]: New, default yes.
Set ENABLE_LIBCTF accordingly.
* Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF and LIBCTF_NOBFD.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* objdump.c (usage): Conditionalize portions on ENABLE_LIBCTF.
(option_values): Likewise.
(long_options): Likewise.
(main): Likewise.
(dump_ctf_indent_lines): Conditionalize out when !ENABLE_LIBCTF.
(make_ctfsect): Likewise.
(dump_ctf_archive_member): Likewise.
(dump_ctf) [ENABLE_LIBCTF]: Likewise.
(dump_ctf) [!ENABLE_LIBCTF]: New empty stub.
* readelf.c (options): Conditionalize portions on ENABLE_LIBCTF.
(usage): Likewise.
(process_section_contents): Likewise.
(shdr_to_ctf_sect): Conditionalize out when !ENABLE_LIBCTF.
(dump_ctf_indent_lines): Likewise.
(dump_section_as_ctf) [ENABLE_LIBCTF]: Likewise.
|
|
Add a configure option, --enable-textrel-check=[no|yes|warning|error],
to decide what ELF linker should do by default with DT_TEXTREL in an
executable or shared library.
PR ld/20824
* NEWS: Mention --enable-textrel-check=[no|yes|warning|error].
* configure.ac: Add --enable-textrel-check=[no|yes|warning|error].
(DEFAULT_LD_TEXTREL_CHECK): New AC_DEFINE_UNQUOTED.
(DEFAULT_LD_TEXTREL_CHECK_WARNING): Likewise.
* ldmain.c (main): Initialize link_info.textrel_check to
DEFAULT_LD_TEXTREL_CHECK.
* lexsup.c (ld_options): Check DEFAULT_LD_TEXTREL_CHECK_WARNING.
* config.in: Regenerated.
* configure: Likewise.
|
|
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
|
|
This patch adds --enable-separate-code to ld configure to turn on
-z separate-code by default and enables it by default for Linux/x86.
This avoids mixing code pages with data to improve cache performance
as well as security.
To reduce x86-64 executable and shared object sizes, the maximum page
size is reduced from 2MB to 4KB when -z separate-code is turned on by
default. Note: -z max-page-size= can be used to set the maximum page
size.
We compared SPEC CPU 2017 performance before and after this change on
Skylake server. There are no any significant performance changes.
Everything is mostly below +/-1%.
bfd/
* config.in: Regenerated.
* configure: Likewise.
* configure.ac: Add --enable-separate-code.
(DEFAULT_LD_Z_SEPARATE_CODE): New AC_DEFINE_UNQUOTED. Default
to 1 for Linux/x86 targets,
* elf64-x86-64.c (ELF_MAXPAGESIZE): Set to 0x1000 if
DEFAULT_LD_Z_SEPARATE_CODE is 1.
ld/
* NEWS: Mention --enable-separate-code.
* configure.ac: Add --enable-separate-code.
(DEFAULT_LD_Z_SEPARATE_CODE): New AC_DEFINE_UNQUOTED.
* configure.tgt: Default ac_default_ld_z_separate_code to 1 for
Linux/x86 targets.
* config.in: Regenerated.
* configure: Likewise.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse): Set
link_info.separate_code DEFAULT_LD_Z_SEPARATE_CODE.
|
|
ld/
* configure.ac: Add --enable-default-hash-style option.
* ldmain.c (main): Set link_info.emit_hash to DEFAULT_EMIT_SYSV_HASH.
Set link_info.emit_gnu_hash to DEFAULT_EMIT_GNU_HASH.
* configure: Regenerate.
* config.in: Regenerate.
gold/
* configure.ac: Add --enable-default-hash-style option.
* options.h (hash_style): Use DEFAULT_HASH_STYLE as default value.
* configure: Regenerate.
* config.in: Regenerate.
|
|
This option switches on ld.bfd --enable-new-dtags by default.
* configure.ac: Add --enable-new-dtags option.
* ldmain.c: Set link_info.new_dtags to 1 if when --enable-new-dtags is
switched on.
* configure: Regenerate.
* config.in: Regenerate.
|
|
* emultempl/elf32.em (search_needed): Remove use of getauxval and
inclusion of <sys/auxv.h>. Replace support for $PLATFORM with a
warning message.
* configure.ac (AC_CHECK_FUNCS): Remove getauxval.
* configure: Regenerate.
* config.in: Regenerate.
|
|
linker when resolving search paths.
PR ld/20535
* emultempl/elf32.em (_search_needed): Add support for pseudo
environment variables supported by ld.so. Namely $ORIGIN, $LIB
and $PLATFORM.
* configure.ac: Add getauxval to list AC_CHECK_FUNCS list.
* config.in: Regenerate.
* configure: Regenerate.
|
|
Add a configure option --enable-relro to decide whether -z relro should
be enabled in ELF linker by default. Default to yes for all Linux
targets, except FRV, HPPA, IA64 and MIPS, since many relro tests fail
on these targets.
PR ld/20283
* NEWS: Mention --enable-relro.
* configure.ac: Add --enable-relro.
(DEFAULT_LD_Z_RELRO): New. Set by --enable-relro.
* configure.tgt (ac_default_ld_z_relro): Default it to 1 for
some Linux targets.
* config.in: Regenerated.
* configure: Likewise.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse): Set
link_info.relro to DEFAULT_LD_Z_RELRO.
* testsuite/config/default.exp (ld_elf_shared_opt): New.
* testsuite/lib/ld-lib.exp (run_dump_test): Pass
$ld_elf_shared_opt to ld for ELF targets with shared object
support.
(run_ld_link_tests): Likewise.
|
|
Enable compression of debug sections by default in the linker, if so configured.
PR gas/19109
. * configure.ac: Note the 'none' is an acceptable argument to
--enable-compressed-debug-sections.
* configure: Regenerate.
gas * configure.ac: Restore --enable-compressed-debug-sections.
Do not enable compressed debug sections by default for x86 Linux
targets.
* configure: Regenerate.
ld * configure.ac: Add --enable-compressed-debug-sections.
* configure: Regenerate.
* config.in: Regenerate.
* ld.texinfo: Document how to determine the default action for
debug sections.
* ldmain.c (main): If DEFAULT_FLAG_COMPRESS_DEBUG is defined then
set the compress_debug field of the link_info structure to
zlib-gabi.
* lexsup.c (elf_static_list_options): Output the default setting
for the --compress-debug-sections option.
* NEWS: Mention the new configure option.
|
|
This patch removes --with-zlib from ld.
ld/
* configure.ac (AM_ZLIB): Removed.
* Makefile.in: Regenerated.
* config.in: Likewise.
* configure: Likewise.
ld/testsuite/
* ld-bootstrap/bootstrap.exp (extralibs): Add -lz.
|
|
This patch uses mmap if it is available and works. It also caches the
view buffer for get_view.
* configure.ac: Add AC_FUNC_MMAP.
* config.in: Regenerated.
* configure: Likewise.
* plugin.c: Include <sys/mman.h>.
(MAP_FAILED): New. Defined if not defined.
(PROT_READ): Likewise.
(MAP_PRIVATE): Likewise.
(view_buffer_t): New.
(plugin_input_file_t): Add view_buffer.
(get_view): Try mmap and cache the view buffer.
(plugin_maybe_claim): Initialize view_buffer.
|
|
This also makes --enable-plugins default to on for hosts that can
support plugins, so we have consistent lto toolchain support. The
ACX_LARGEFILE moves aren't strictly necessary, but are harmless and
will be necessary if plugin support is extended to more hosts via
libtool's dlopen support. I started down that path then decided it
was more work than I was interested in doing. (ACX_LARGEFILE invokes
AC_PLUGINS.)
config/
* plugins.m4: Test for dlfcn.h or windows.h here to set default
for --enable-plugins. Report error if someone tries to enable
plugins on a host we don't support.
bfd/
* configure.ac: Delete redundant plugin related checks.
* configure: Regenerate.
binutils/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gas/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gprof/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* configure: Regenerate.
* gconfig.in: Regenerate.
ld/
* configure.ac: Move AC_PROG_CC and other macros earlier. Delete
plugin checks now done in config/plugins.m4.
* config.in: Regenerate.
* configure: Regenerate.
|
|
bfd/
* configure.ac: Rename from configure.in.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* doc/Makefile.in: Regenerate.
opcodes/
* configure.ac: Rename from configure.in.
* Makefile.in: Regenerate.
* config.in: Regenerate.
binutils/
* configure.ac: Rename from configure.in.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* configure.ac: Rename from configure.in.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof/
* configure.ac: Rename from configure.in.
* configure.ac: Rename from configure.in.
* Makefile.in: Regenerate.
* gconfig.in: Regenerate.
ld/
* configure.ac: Rename from configure.in.
* Makefile.in: Regenerate.
* config.in: Regenerate.
|
|
|
|
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* alpha-opc.c: Include sysdep.h before any other header file.
* alpha-dis.c: Likewise.
* avr-dis.c: Likewise.
* cgen-opc.c: Likewise.
* cr16-dis.c: Likewise.
* cris-dis.c: Likewise.
* crx-dis.c: Likewise.
* d10v-dis.c: Likewise.
* d10v-opc.c: Likewise.
* d30v-dis.c: Likewise.
* d30v-opc.c: Likewise.
* h8500-dis.c: Likewise.
* i370-dis.c: Likewise.
* i370-opc.c: Likewise.
* m10200-dis.c: Likewise.
* m10300-dis.c: Likewise.
* micromips-opc.c: Likewise.
* mips-opc.c: Likewise.
* mips61-opc.c: Likewise.
* moxie-dis.c: Likewise.
* or32-opc.c: Likewise.
* pj-dis.c: Likewise.
* ppc-dis.c: Likewise.
* ppc-opc.c: Likewise.
* s390-dis.c: Likewise.
* sh-dis.c: Likewise.
* sh64-dis.c: Likewise.
* sparc-dis.c: Likewise.
* sparc-opc.c: Likewise.
* spu-dis.c: Likewise.
* tic30-dis.c: Likewise.
* tic54x-dis.c: Likewise.
* tic80-dis.c: Likewise.
* tic80-opc.c: Likewise.
* tilegx-dis.c: Likewise.
* tilepro-dis.c: Likewise.
* v850-dis.c: Likewise.
* v850-opc.c: Likewise.
* vax-dis.c: Likewise.
* w65-dis.c: Likewise.
* xgate-dis.c: Likewise.
* xtensa-dis.c: Likewise.
* rl78-decode.opc: Likewise.
* rl78-decode.c: Regenerate.
* rx-decode.opc: Likewise.
* rx-decode.c: Regenerate.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* bfd-in.h: Generate an error if included before config.h.
* sysdep.h: Likewise.
* bfd-in2.h: Regenerate.
* compress.c: Remove #include "config.h".
* plugin.c: Likewise.
* elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h.
* elf64-hppa.c: Likewise.
* som.c: Likewise.
* xsymc.c: Likewise.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* Makefile.am: Use wrappers around C files generated by flex.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* itbl-lex-wrapper.c: New file.
* config/bfin-lex-wrapper.c: New file.
* cgen.c: Include as.h before setjmp.h.
* config/tc-dlx.c: Include as.h before any other header.
* config/tc-h8300.c: Likewise.
* config/tc-lm32.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mmix.c: Likewise.
* config/tc-msp430.c: Likewise.
* config/tc-or32.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c: Likewise.
* config/tc-xtensa.c: Likewise.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* unwind-ia64.h: Include config.h.
|
|
* configure.in: Invoke ACX_HEADER_STRING.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: If STRINGS_WITH_STRING is defined then include both
string.h and strings.h.
|
|
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
gas/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
gold/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
ld/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
|
|
(AM_LC_MESSAGES): Add.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
|
|
|
|
bfd/
2010-12-15 H.J. Lu <hongjiu.lu@intel.com>
* elf.c (_bfd_elf_new_section_hook): Special handling for
.init_array/.fini_array output sections.
ld/
2010-12-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (GENSCRIPTS): Add @enable_initfini_array@.
* NEWS: Mention SORT_BY_INIT_PRIORITY.
* configure.in: Add AC_CANONICAL_BUILD.
Add --enable-initfini-array.
* genscripts.sh (ENABLE_INITFINI_ARRAY): New.
* ld.h (sort_type): Add by_init_priority.
* ld.texinfo: Document SORT_BY_INIT_PRIORITY.
* ldgram.y (SORT_BY_INIT_PRIORITY): New.
(wildcard_spec): Handle SORT_BY_INIT_PRIORITY.
* ldlang.c (get_init_priority): New.
(compare_section): Use get_init_priority for by_init_priority.
* ldlex.l (SORT_BY_INIT_PRIORITY): New.
* scripttempl/elf.sc: Support ENABLE_INITFINI_ARRAY.
* Makefile.in: Regenerated.
* aclocal.m4: Regenerated.
* config.in: Likewise.
* configure: Likewise.
ld/testsuite/
2010-12-15 H.J. Lu <hongjiu.lu@intel.com>
* ld-elf/elf.exp (array_tests): Add init-mixed.
(array_tests_static): Likewise.
Also delete tmpdir/init-mixed.
* ld-elf/init-mixed.c: New.
* ld-elf/init-mixed.out: Likewise.
|
|
ld/ChangeLog:
* configure.in: If <dlfcn.h> can't be found, try for <Windows.h>
* configure: Regenerate.
* config.in: Likewise.
* plugin.c [!HAVE_DLFCN_H && HAVE_WINDOWS_H] (dlopen): Provide
trival LoadLibrary-based replacement for Windows systems.
[!HAVE_DLFCN_H && HAVE_WINDOWS_H] (dlsym): Likewise trivial
replacement based on GetProcAddress.
[!HAVE_DLFCN_H && HAVE_WINDOWS_H] (dlsym): Likewise FreeLibrary.
* sysdep.h: Don't infer presence of <dlfcn.h> from ENABLE_PLUGINS
anymore, use its own guard.
|
|
[PATCH] Add infrastructure for plugin API; functionality to follow.
include/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 1/6).
* plugin-api.h (LDPT_GNU_LD_VERSION): New ld_plugin_tag enum member.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 1/6).
* configure.in: Add AC_CHECKs for file io and dlfcn headers and
functions and AC_SEARCH for -ldl.
(enable_plugins): New shell variable set if above tests find dlopen
functionality.
(ENABLE_PLUGINS): Add related automake conditional.
* configure: Regenerate.
* config.in: Likewise.
* Makefile.am (PLUGIN_C): Declare plugin C source file, conditional
on ENABLE_PLUGINS being defined.
(PLUGIN_H): Likewise for header file.
(PLUGIN_OBJECT): Likewise for object file.
(PLUGIN_CFLAGS): Likewise -D flag required to compile plugin support.
(AM_CPPFLAGS): Use PLUGIN_CFLAGS.
(CFILES): Use PLUGIN_C.
(HFILES): Use PLUGIN_H.
(OFILES): Use PLUGIN_OBJECT.
(ld_new_SOURCES): Use PLUGIN_C.
(noinst_LTLIBRARIES)[ENABLE_PLUGINS]: Declare test plugin.
(libldtestplug_la_SOURCES)[ENABLE_PLUGINS]: Add automake definition
for test plugin.
(libldtestplug_la_CFLAGS)[ENABLE_PLUGINS]: Likewise.
(libldtestplug_la_LDFLAGS)[ENABLE_PLUGINS]: Likewise.
* Makefile.in: Regenerate.
* sysdep.h: Include stdarg.h, unistd.h and one of fcntl.h or
sys/file.h where available. Include dlfcn.h when ENABLE_PLUGINS.
(O_RDONLY): Supply default definition likewise to bfd's sysdep.h
(O_WRONLY): Likewise.
(O_RDWR): Likewise.
(O_ACCMODE): Likewise.
(O_BINARY): Likewise.
(SEEK_SET): Likewise.
(SEEK_CUR): Likewise.
(SEEK_END): Likewise.
* ldmisc.c (vfinfo): Make non-static. Add %p format char.
* ldmisc.h (vfinfo): Declare extern prototype.
* lexsup.c (enum option_values)[ENABLE_PLUGINS]: Add new entries for
OPTION_PLUGIN and OPTION_PLUGIN_OPT.
(ld_options[])[ENABLE_PLUGINS]: Add option data for the above two.
(parse_args)[ENABLE_PLUGINS]: Handle them, and load all plugins once
option parsing is complete.
* ldmain.c (main)[ENABLE_PLUGINS]: Call plugin cleanup hooks just
after lang_finish.
* plugin.c: New source file.
* plugin.h: Likewise new header.
* testplug.c: New source file.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 1/6).
* ld-bootstrap/bootstrap.exp: Skip static tests also if LD plugins
are enabled.
* lib/ld-lib.exp (proc regexp_diff): Extend verbose debug output.
(proc set_file_contents): Write a file with the supplied content.
(run_ld_link_tests): Add new 'ld' action to test linker output.
(proc check_plugin_api_available): Return true if linker under test
supports the plugin API.
* ld-plugin/func.c: New test source file.
* ld-plugin/main.c: Likewise.
* ld-plugin/text.c: Likewise.
* ld-plugin/plugin-1.d: New dump test output pattern script.
* ld-plugin/plugin-2.d: Likewise.
* ld-plugin/plugin-3.d: Likewise.
* ld-plugin/plugin-4.d: Likewise.
* ld-plugin/plugin-5.d: Likewise.
* ld-plugin/plugin.exp: New test control script.
---
[PATCH] Implement claim file and all symbols read hooks and add symbols callback.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 2/6).
* ldfile.c (ldfile_try_open_bfd)[ENABLE_PLUGINS]: Don't return early
during compat checks if they pass, instead offer any successfully
opened and accepted file to the plugin claim file hooks chain. Create
a dummy bfd to accept symbols added by the plugin, if the plugin
claims the file.
* ldlang.c (lang_process)[ENABLE_PLUGINS]: Call plugin all symbols
read hook chain before ldemul_after_open.
* ldlang.h (struct lang_input_statement_struct): Add new single-bit
'claimed' flag.
* plugin.c (IRONLY_SUFFIX): New macro for dummy bfd file suffix.
(IRONLY_SUFFIX_LEN): Length of the above string.
(plugin_get_ir_dummy_bfd): New function to create the dummy bfd used
to store symbols for ir-only files.
(is_ir_dummy_bfd): New function to check if a bfd is ir-only.
(asymbol_from_plugin_symbol): New function converts symbol formats.
(add_symbols): Call it to convert plugin syms to bfd syms and add
them to the dummy bfd.
* plugin.h: Add missing include guards.
(plugin_get_ir_dummy_bfd): Add prototype.
(is_ir_dummy_bfd): Likewise.
* testplug.c (TV_MESSAGE): New helper macro.
(struct claim_file): New struct.
(claim_file_t): New typedef.
(tag_names[]): Make static and const.
(claimfiles_list): New variable.
(claimfiles_tail_chain_ptr): Likewise.
(last_claimfile): Likewise.
(record_claim_file): Record a file to claim on a singly-linked list.
(parse_symdefstr): Parse an ASCII representation of a symbol from a
plugin option into the fields of a struct ld_plugin_symbol.
(record_claimed_file_symbol): Use it to parse plugin option for
adding a symbol.
(parse_option): Parse claim file and add symbol options.
(dump_tv_tag): Use TV_MESSAGE.
(onload): Likewise.
(onclaim_file): Make static. Use TV_MESSAGE. Scan list of files to
claim and claim this file if required, adding any symbols specified.
(onall_symbols_read): Make static and use TV_MESSAGE.
(oncleanup): Likewise.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 2/6).
* ld-plugin/plugin-3.d: Enable regexes for new functionality.
* ld-plugin/plugin-5.d: Likewise.
* ld-plugin/plugin-6.d: New testcase.
* ld-plugin/plugin-7.d: Likewise.
* ld-plugin/plugin.exp: Use 'nm' on compiled test objects to determine
whether symbols in plugin arguments need an underscore prefix. Add
new plugin-6.d and plugin-7.d testcases.
---
[PATCH] Implement get symbols callback.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 3/6).
* ldmain.c (notice)[ENABLE_PLUGINS]: Call plugin_notice.
* plugin.c (non_ironly_hash): Add new bfd hash table.
(plugin_load_plugins): Exit early if no plugins to load. If plugins
do load successfully, set notice_all flag in link info.
(get_symbols): Implement.
(plugin_load_plugins): Exit early if no plugins to load, else after
loading plugins successfully enable notice_all mode.
(init_non_ironly_hash): Lazily init non_ironly_hash table.
(plugin_notice): Record symbols referenced from non-IR files in the
non_ironly_hash. Suppress tracing, cref generation and nocrossrefs
tracking for symbols from dummy IR bfds.
* plugin.h: Fix formatting.
(plugin_notice): Add prototype.
* testplug.c (dumpresolutions): New global var.
(parse_options): Accept "dumpresolutions".
(onall_symbols_read): Get syms and dump resolutions if it was given.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 3/6).
* ld-plugin/plugin-8.d: New testcase.
* ld-plugin/plugin.exp: Invoke it.
---
[PATCH] Implement add input file, add input lib and set extra lib path callbacks.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 4/6).
* ldlang.c (lang_process)[ENABLE_PLUGINS]: Move invocation of
plugin_call_all_symbols_read to before setting of gc_sym_list, and
open any new input files that may have been added during it.
* ldmain.c (multiple_definition)[ENABLE_PLUGINS]: Call out to
plugin_multiple_definition and let it have first say over what to do
with the clashing definitions.
* plugin.c (no_more_claiming): New boolean variable.
(plugin_cached_allow_multiple_defs): Likewise.
(add_input_file): Implement.
(add_input_library): Likewise.
(set_extra_library_path): Likewise.
(plugin_call_claim_file): Don't do anything when no_more_claiming set.
(plugin_call_all_symbols_read): Set it. Disable link info
"allow_multiple_definition" flag, but cache its value.
(plugin_multiple_definition): New function.
* plugin.h (plugin_multiple_definition): Add prototype.
* testplug.c (addfile_enum_t): New enumerated typedef.
(add_file_t): New struct typedef.
(addfiles_list): New variable.
(addfiles_tail_chain_ptr): Likewise.
(record_add_file): New function.
(parse_option): Parse "add:", "lib:" and "dir:" options and call it.
(onall_symbols_read): Iterate the list of new files, libs and dirs,
adding them.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 4/6).
* ld-plugin/plugin-9.d: New testcase.
* ld-plugin/plugin.exp: Invoke it.
---
[PATCH] Add ELF symbol visibility support to plugin interface.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 5/6).
* plugin.c (asymbol_from_plugin_symbol): If the bfd is an ELF bfd,
find the elf symbol data and set the visibility in the st_other field.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 5/6).
* ld-plugin/plugin-ignore.d: New dump test control script.
* ld-plugin/plugin-vis-1.d: Likewise.
* ld-plugin/plugin.exp: Add list of ELF-only tests and run them if
testing on an ELF target.
---
[PATCH] Add archive support to plugin interface.
bfd/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* aoutx.h (aout_link_check_ar_symbols): Take new "subsbfd" reference
parameter and pass it when invoking add_archive_element callback.
(aout_link_check_archive_element): Handle substitute bfd if it
was set during add_archive_element callback in the above.
* cofflink.c (coff_link_check_ar_symbols): Take new "subsbfd" reference
parameter and pass it when invoking add_archive_element callback.
(coff_link_check_archive_element): Handle substitute bfd if it
was set during add_archive_element callback in the above.
* ecoff.c (read_ext_syms_and_strs): New function holds symbol-reading
code factored-out from ecoff_link_check_archive_element.
(reread_ext_syms_and_strs): Clear old symbols and call it.
(ecoff_link_check_archive_element): Use the above. Handle substitute
BFD if one is set by add_archive_element callback.
(ecoff_link_add_archive_symbols): Likewise allow bfd substitution.
* elflink.c (elf_link_add_archive_symbols): Likewise.
* linker.c (generic_link_check_archive_element): Likewise.
* pdp11.c (aout_link_check_ar_symbols): Take new "subsbfd" reference
parameter and pass it when invoking add_archive_element callback.
(aout_link_check_archive_element): Handle substitute bfd if it was
set during add_archive_element callback in the above.
* vms-alpha.c (alpha_vms_link_add_archive_symbols): Handle substitute
BFD if one is set by add_archive_element callback.
* xcofflink.c (xcoff_link_check_dynamic_ar_symbols): Take new "subsbfd"
reference parameter and pass it when invoking add_archive_element
callback.
(xcoff_link_check_ar_symbols): Likewise.
(xcoff_link_check_archive_element): Handle bfd substitution if it was
set by callback in the above.
include/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* bfdlink.h (struct_bfd_link_callbacks): Document new argument
to add_archive_element callback used to return a replacement bfd which
is to be added to the hash table in place of the original element.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* ldlang.c (load_symbols): Handle bfd subsitution when calling the
add_archive_element callback.
* ldmain.c (add_archive_element)[ENABLE_PLUGINS]: Offer the archive
member to the plugins and if claimed set "subsbfd" output parameter to
point to the dummy IR-only BFD.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* ld-plugin/plugin-10.d: New dump test control script.
* ld-plugin/plugin-11.d: Likewise.
* ld-plugin/plugin.exp: Run them.
---
|
|
config/:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64.
/:
* configure: Regenerate.
etc/:
* configure: Regenerate.
sim/common/:
* config.in: Regenerate.
* configure: Likewise.
sim/iq2000/:
* config.in: Regenerate.
* configure: Likewise.
sim/d10v/:
* config.in: Regenerate.
* configure: Likewise.
sim/igen/:
* config.in: Regenerate.
* configure: Likewise.
sim/m32r/:
* config.in: Regenerate.
* configure: Likewise.
sim/frv/:
* config.in: Regenerate.
* configure: Likewise.
sim/:
* avr/config.in: Regenerate.
* avr/configure: Likewise.
* configure: Likewise.
* cris/config.in: Likewise.
* cris/configure: Likewise.
sim/h8300/:
* config.in: Regenerate.
* configure: Likewise.
sim/mn10300/:
* config.in: Regenerate.
* configure: Likewise.
sim/ppc/:
* config.in: Regenerate.
* configure: Likewise.
sim/erc32/:
* config.in: Regenerate.
* configure: Likewise.
sim/arm/:
* config.in: Regenerate.
* configure: Likewise.
sim/m68hc11/:
* config.in: Regenerate.
* configure: Likewise.
sim/lm32/:
* config.in: Regenerate.
* configure: Likewise.
sim/sh64/:
* config.in: Regenerate.
* configure: Likewise.
sim/v850/:
* config.in: Regenerate.
* configure: Likewise.
sim/cr16/:
* config.in: Regenerate.
* configure: Likewise.
sim/moxie/:
* config.in: Regenerate.
* configure: Likewise.
sim/m32c/:
* config.in: Regenerate.
* configure: Likewise.
sim/mips/:
* config.in: Regenerate.
* configure: Likewise.
sim/mcore/:
* config.in: Regenerate.
* configure: Likewise.
sim/testsuite/d10v-elf/:
* configure: Regenerate.
sim/testsuite/:
* configure: Regenerate.
sim/testsuite/frv-elf/:
* configure: Regenerate.
sim/testsuite/m32r-elf/:
* configure: Regenerate.
sim/testsuite/mips64el-elf/:
* configure: Regenerate.
sim/sh/:
* config.in: Regenerate.
* configure: Likewise.
gold/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* testsuite/Makefile.in: Likewise.
gprof/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* configure: Likewise.
* gconfig.in: Likewise.
opcodes/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
gas/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
ld/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
gdb/:
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
* gnulib/Makefile.in: Likewise.
gdb/doc/:
* configure: Regenerate.
gdb/gdbserver/:
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
gdb/testsuite/:
* configure: Regenerate.
* gdb.hp/configure: Likewise.
* gdb.hp/gdb.aCC/configure: Likewise.
* gdb.hp/gdb.base-hp/configure: Likewise.
* gdb.hp/gdb.compat/configure: Likewise.
* gdb.hp/gdb.defects/configure: Likewise.
* gdb.hp/gdb.objdbg/configure: Likewise.
* gdb.stabs/configure: Likewise.
binutils/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
bfd/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
bfd/doc/:
* Makefile.in: Regenerate.
readline/:
* configure: Regenerate.
readline/examples/rlfe/:
* configure: Regenerate.
|
|
Fix loading large elf64 binaries on 32bit hosts.
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.
binutils/
Fix loading large elf64 binaries on 32bit hosts.
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.
gas/
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.
gprof/
* configure.in: Call AC_SYS_LARGEFILE.
* gconfig.in: Regenerate.
* configure: Regenerate.
ld/
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.
libiberty/
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.
|
|
* configure.in: Invoke AC_USE_SYSTEM_EXTENSIONS.
|
|
* configure.in: Check for, and include, libz.a if it is
present.
* configure: Regenerate.
* config.in: Regenerate.
|
|
config/
* override.m4: Use m4_version_prereq throughout.
(_AC_ARG_VAR_VALIDATE, AC_MSG_FAILURE): Backport from git
Autoconf: output pwd along with fatal errors, so the right
config.log file is hinted at more prominently.
(PARSE_ARGS): Push setting of ac_pwd in this diversion.
(_GCC_AUTOCONF_VERSION): New, define to 2.59 if not defined.
(_GCC_AUTOCONF_VERSION_CHECK): New macro, require use of Autoconf
version _GCC_AUTOCONF_VERSION throughout the tree.
(m4_wrap): New override, fix for Posix semantics of m4wrap.
binutils/
* configure: Regenerate.
opcodes/
* configure: Regenerate.
bfd/
* configure: Regenerate.
gas/
* configure: Regenerate.
gprof/
* configure: Regenerate.
ld/
* config.in: Regenerate.
* configure: Regenerate.
|
|
bfd/
* elf32-m68k.c (struct elf_m68k_link_hash_entry: got_entry_key,
glist): New fields.
(struct elf_m68k_got_entry_key, struct elf_m68k_got_entry,
struct elf_m68k_got, struct elf_m68k_bfd2got_entry,
struct elf_m68k_multi_got): New data structures.
(struct elf_m68k_link_hash_table: local_gp_p, use_neg_got_offsets_p,
allow_multigot_p, multi_got_): New fields.
(elf_m68k_multi_got): New macro.
(elf_m68k_link_hash_newfunc): Initialize new fields of
struct elf_m68k_link_hash_entry.
(elf_m68k_link_hash_table_create): Initialize new fields of
struct elf_m68k_link_hash_table.
(elf_m68k_link_hash_table_free): New static function implementing hook.
(elf_m68k_init_got, elf_m68k_clear_got, elf_m68k_create_empty_got): New
static functions for struct elf_m68k_got.
(elf_m68k_init_got_entry_key, elf_m68k_got_entry_hash,
elf_m68k_got_entry_eq): New static functions for
struct elf_m68k_got_entry.
(ELF_M68K_REL_8O_MAX_N_ENTRIES_IN_GOT,
ELF_M68K_REL_8O_16O_MAX_N_ENTRIES_IN_GOT): New macros.
(enum elf_m68k_get_entry_howto): New enum.
(elf_m68k_get_got_entry, elf_m68k_update_got_entry_type,
elf_m68k_remove_got_entry_type): New static functions for
struct elf_m68k_got_entry.
(elf_m68k_add_entry_to_got): New static function.
(elf_m68k_bfd2got_entry_hash, elf_m68k_bfd2got_entry_eq,
elf_m68k_bfd2got_entry_del, elf_m68k_get_bfd2got_entry): New static
functions for struct elf_m68k_bfd2got_entry.
(struct elf_m68k_can_merge_gots_arg, elf_m68k_can_merge_gots_1,
elf_m68k_can_merge_gots): New traversal.
(struct elf_m68k_merge_gots_arg, elf_m68k_merge_gots_1,
elf_m68k_merge_gots): Ditto.
(struct elf_m68k_finalize_got_offsets_arg,
elf_m68k_finalize_got_offsets_1, elf_m68k_finalize_got_offsets): Ditto.
(struct elf_m68k_partition_multi_got_arg,
elf_m68k_partition_multi_got_1, elf_m68k_init_symndx2h_1,
elf_m68k_partition_multi_got): Ditto.
(elf_m68k_find_got_entry_ptr, elf_m68k_remove_got_entry): New static
functions.
(elf_m68k_copy_indirect_symbol): New static function implementing
a hook.
(elf_m68k_check_relocs): Update to add entries to multi-GOT.
(elf_m68k_gc_sweep_hook): Update to remove entries from multi-GOT.
(elf_m68k_always_size_sections): Assign BFDs to GOTs.
(elf_m68k_relocate_section): Update to properly handle GOT relocations.
(elf_m68k_finish_dynamic_symbol): Update to traverse all GOT entries
of a global symbol.
(bfd_elf_m68k_set_target_options): New function.
(bfd_elf32_bfd_link_hash_table_free): Define hook.
(bfd_elf32_bfd_final_link): Change expansion to bfd_elf_final_link
to skip generic calculation of GOT offsets.
(elf_backend_copy_indirect_symbol): Define hook.
* bfd-in.h (bfd_elf_m68k_set_target_options): Declare function.
* bfd-in2.h: Regenerate.
ld/
* configure.in (--enable-got): New option. Handle it.
* configure: Regenerate.
* config.in: Regenerate.
* emultempl/m68kelf.em: (got_handling_target_default): New shell
variable.
(GOT_HANDLING_TARGET_DEFAULT): New macro.
(GOT_HANDLING_DEFAULT): New macro. Initialize it from configure
option if one was given.
(got_handling): New static variable.
(elf_m68k_create_output_section_statements): New static function
implementing hook.
(PARSE_AND_LIST_PROLOGUE): Define shell variable.
(OPTION_GOT): New macro.
(PARSE_AND_LIST_LONGOPTS): Define shell variable. Specify
--got option.
(got): New linker option.
(PARSE_AND_LIST_OPTIONS): Define shell variable. Print help string
for --got option.
(PARSE_AND_LIST_ARGS_CASES): Define shell variable. Handle --got
option.
* ld.texinfo: Document --got=<type> option.
* gen-doc.texi: Add M68K.
* NEWS: Mention the new feature.
ld/testsuite/
* ld-m68k/got-12.s: New file.
* ld-m68k/got-13.s: New file.
* ld-m68k/got-14.s: New file.
* ld-m68k/got-15.s: New file.
* ld-m68k/got-34.s: New file.
* ld-m68k/got-35.s: New file.
* ld-m68k/got-single-12-ok.d: New dump test.
* ld-m68k/got-single-13-er.d: New dump test.
* ld-m68k/got-negative-14-ok.d: New dump test.
* ld-m68k/got-negative-15-er.d: New dump test.
* ld-m68k/got-negative-12-13-14-34-ok.d: New dump test.
* ld-m68k/got-negative-12-13-14-35-er.d: New dump test.
* ld-m68k/got-multigot-14-ok.d: New dump test.
* ld-m68k/got-multigot-15-er.d: New dump test.
* ld-m68k/got-multigot-12-13-14-34-35-ok.d: New dump test.
* ld-m68k/xgot-15.s: New source.
* ld-m68k/got-xgot-15-ok.d: New test.
* ld-m68k/got-xgot-12-13-14-15-34-35-ok.d: New test.
* ld-m68k/m68k.exp: Run new tests.
|
|
* configure.in: Invoke AC_GNU_SOURCE.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
|
|
|
|
spu target emul files.
* configure.in: Check for mkstemp and waitpid.
* Makefile.in: Regenerate.
* configure: Regenerate.
* config.in: Regenerate.
* ldlang.c (input_file_chain): Make global.
(lang_add_input_file): Don't set lang_has_input_file here.
* ldlang.h (input_file_chain): Declare.
* emultempl/ppc32elf.em (ppc_recognized_file): New function.
(LDEMUL_RECOGNIZED_FILE): Define.
* emultempl/ppc64elf.em (ppc64_recognized_file): New function.
(LDEMUL_RECOGNIZED_FILE): Define.
* emultempl/spuelf.em (struct tflist): New.
(tmp_file_list): New var.
|
|
* configure.in (AC_CHECK_HEADERS): Add limits.h and sys/param.h.
* configure: Regenerated.
* config.in: Likewise.
|
|
|
|
|
|
* configure.in (AM_BINUTILS_WARNINGS): Add.
(BFD_NEED_DECLARATION) Replace with AC_CHECK_DECLS.
* config.in: Regenerate.
* configure: Regenerate.
* sysdep.h (NEED_DECLARATION_*): Replace with HAVE_DECL_*
* ldmain.c: Ditto.
|
|
* ylwrap: Import from Automake 1.9.5.
binutils/
* acinclude.m4: Remove obsolete code.
* configure.in: Update AC_PREREQ.
* doc/Makefile.am (binutils_TEXINFOS): Define.
(config.texi): Depend on distributed files instead of built
files.
(binutils.dvi, binutils.info): Remove unnecessary rules.
(DISTCLEANFILES): Remove.
(install-data-local): Renamed from install.
(info-local): Renamed from info.
* Makefile.in, aclocal.m4, config.in, configure,
doc/Makefile.in: Regenerated.
gas/
* Makefile.am (m68k-parse.c, itbl-parse.c): Update ylwrap
invocation.
* Makefile.in: Regenerated.
ld/
* Makefile.am (AM_MAKEINFOFLAGS): Define.
(TEXI2DVI): Define.
(ldver.texi): Depend on distributed files instead of built files.
(ld.info): Include $(srcdir) in the rule target. Remove actions.
(ld.dvi): Remove actions.
(MAINTAINERCLEANFILES): Add configdoc.texi.
(CONFIG_STATUS_DEPENDENCIES): Add bfd/configure.in.
(install-data-local): Renamed from install.
(Makefile): Remove explicit dependency.
* acinclude.m4: Remove obsolete code.
* configure.in: Update AC_PREREQ. Remove extra $CONFIG_SHELL.
* Makefile.in, aclocal.m4, config.in, configure: Regenerated.
gdb/
* Makefile.in (.y.c): Update ylwrap invocation.
|
|
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* libcoff.h: Regenerate.
bfd/doc/
* Makefile.in: Regenerate.
binutils/
* Makefile.am: Run "make dep-am".
(syslex.o, sysinfo.o, arparse.o, arlex.o): Add -Wno-error to command.
(sysroff.o, defparse.o, deflex.o): Likewise.
(nlmheader.o, rcparse.o, rclex.o): Likewise.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
gas/
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
ld/
* Makefile.am: Run "make dep-am".
(ldgram.o, ldlex.o, deffilep.o): Add -Wno-error to command.
* Makefile.in: Regenerate.
* config.in: Regenerate.
|
|
compatible
with the one in include/getopt.h. If so then define HAVE_DECL_GETOPT.
|
|
* configure: Regenerate.
|
|
* Makefile.in: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* aclocal.m4: Regenerate.
* po/ld.pot: Regenerate.
|