| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Makefile.in is generated.
* Makefile.am (eelf64_s390.c): Depend on emultempl/s390.em.
|
|
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
|
|
PR ld/21569
* scripttempl/avrtiny.sc: Remove file.
* Makefile.am (eavrtiny.c): Depend on avr.sc, no more on avrtiny.sc.
* Makefile.in: Regenerate.
* emulparams/avrtiny.sh (SCRIPT_NAME): Set var to "avr".
(TEXT_ORIGIN): Remove var.
(FUSE_NAME, FUSE_LENGTH, LOCK_LENGTH, SIGNATURE_LENGTH)
(RODATA_PM_OFFSET): Set new vars.
* emulparams/avr1.sh (FUSE_NAME, EEPROM_LENGTH, FUSE_LENGTH)
(LOCK_LENGTH, SIGNATURE_LENGTH, USER_SIGNATURE_LENGTH): Set new vars.
* emulparams/avr2.sh: Same.
* emulparams/avr25.sh: Same.
* emulparams/avr3.sh: Same.
* emulparams/avr31.sh: Same.
* emulparams/avr35.sh: Same.
* emulparams/avr4.sh: Same.
* emulparams/avr5.sh: Same.
* emulparams/avr51.sh: Same.
* emulparams/avr6.sh: Same.
* emulparams/avrxmega1.sh: Same.
* emulparams/avrxmega2.sh: Same.
* emulparams/avrxmega3.sh: Same.
* emulparams/avrxmega4.sh: Same.
* emulparams/avrxmega5.sh: Same.
* emulparams/avrxmega6.sh: Same.
* emulparams/avrxmega7.sh: Same.
* scripttempl/avr.sc (__EEPROM_REGION_LENGTH__): Only define
if EEPROM_LENGTH is set.
(MEMORY) [eeprom]: Same.
(SECTIONS) [.eeprom]: Same for output section.
(__USER_SIGNATURE_REGION_LENGTH__): Only define if
USER_SIGNATURE_LENGTH is set.
(MEMORY) [user_signatures]: Same.
(SECTIONS) [.fuse]: Only define output section if FUSE_NAME = fuse.
(SECTIONS) [.config]: Only define output section if FUSE_NAME = config.
|
|
-z nodynamic-undefined-weak is only implemented for x86. (The sparc
backend has some support code but doesn't enable the option by
including ld/emulparams/dynamic_undefined_weak.sh, and since the
support looks like it may be broken I haven't enabled it.) This patch
adds the complementary -z dynamic-undefined-weak, extends both options
to affect building of shared libraries as well as executables, and
adds support for the option on powerpc.
include/
* bfdlink.h (struct bfd_link_info <dynamic_undefined_weak>):
Revise comment.
bfd/
* elflink.c (_bfd_elf_adjust_dynamic_symbol): Hide undefweak
or make dynamic for info->dynamic_undefined_weak 0 and 1.
* elf32-ppc.c:Formatting.
(ensure_undefweak_dynamic): Don't make dynamic when
info->dynamic_undefined_weak is zero.
(allocate_dynrelocs): Discard undefweak dyn_relocs for
info->dynamic_undefined_weak. Discard undef dyn_relocs when
not default visibility. Discard undef and undefweak
dyn_relocs earlier.
(ppc_elf_relocate_section): Adjust to suit.
* elf64-ppc.c: Formatting.
(ensure_undefweak_dynamic): Don't make dynamic when
info->dynamic_undefined_weak is zero.
(allocate_dynrelocs): Discard undefweak dyn_relocs for
info->dynamic_undefined_weak. Discard them earlier.
ld/
* ld.texinfo (dynamic-undefined-weak): Document.
(nodynamic-undefined-weak): Document that this option now can
be used with shared libs.
* emulparams/dynamic_undefined_weak.sh: Support -z
dynamic-undefined-weak.
* emulparams/elf32ppccommon.sh: Include dynamic_undefined_weak.sh.
* testsuite/ld-undefined/weak-undef.exp (undef_weak_so),
(undef_weak_exe): New. Use them. Add -z dynamic-undefined-weak
and -z nodynamic-undefined-weak tests.
* Makefile.am: Update powerpc dependencies.
* Makefile.in: Regenerate.
|
|
The arc700 nps variant uses some specific named sections to
facilitate its CMEM based instructions, which operate on memory
regions fixed at specific addresses.
This commit adds the arclinux_nps emulation, which is based on the
arclinux emulation. The new emulation uses the OTHER_SECTIONS
variable in the emulation parameters script to provide symbols
mapping to various locations in the CMEM space on nps.
The accompanying test ensures that all symbols are provided at the
correct address in the linker script.
ld/ChangeLog:
* Makefile.am: Add earclinux_nps.c target and add to
ALL_EMULATION_SOURCES.
* Makefile.in: Likewise, regenerated.
* configure.tgt: Add arclinux_nps as an extra emulation for
arc*-*-elf* and arc*-*-linux*.
* emulparams/arc-nps.sh: New file.
* emulparams/arclinux_nps.sh: New file.
* testsuite/ld-arc/arclinux-nps.d,
* testsuite/ld-arc/arclinux-nps.s: New test.
|
|
I noticed that PRU LD is broken when BFD is configured
with --enable-targets=all. This patch fixes it, and takes the
opportunity to clean the epruelf.c dependencies.
* Makefile.am (ALL_EMULATION_SOURCES): Add epruelf.c.
(epruelf.c): Remove unneeded dependencies.
* Makefile.in: Regenerate
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
|
|
Many of the ld tests are not run for cross builds, in some cases
because the test needs to run a newly linked executable, and in others
simply because it was easier to write the test for native only. Even
when a test needs to run, it's good to compile and link to exercise
the linker. So that's what this patch does. I've also rid us of
the old ld_link procedure with all the HOSTING_CRT0 etc. setup. It's
much simpler to just link with $CC.
This does mean that a cross build with cross-compiler installed but
no cross C-library will give lots of failures. If that turns out to
be too annoying, I guess we can write a tcl procedure to detect it and
not run all the extra tests.
* Makefile.am (bootstrap): Delete rule.
(ld-partial, ld1, ld1-full, ld2, ld3): Likewise.
(HOSTING_CRT0, HOSTING_SCRT0): Don't define.
(HOSTING_LIBS, HOSTING_SLIBS, HOSTING_EMU): Likewise.
* configure.ac (HOSTING_CRT0, HOSTING_SCRT0): Don't define.
(HOSTING_LIBS, HOSTING_SLIBS): Likewise.
* configure.host (HOSTING_CRT0, HOSTING_LIBS): Don't define.
* Makefile.in: Regenerate.
* configure: Regenerate.
* testsuite/config/default.exp (get_link_files): Delete.
(HOSTING_CRT0, HOSTING_SCRT0, HOSTING_LIBS, HOSTING_SLIBS): Don't
define.
(ld_simple_link): Delete.
* testsuite/lib/ld-lib.exp (default_ld_link): Delete
(default_ld_simple_link): Rename to default_ld_link.
(ld_simple_link_defsyms): Rename to ld_link_defsyms.
(run_ld_link_tests): Use ld_link, not ld_simple_link.
(run_cc_link_tests): Likewise.
(run_ld_link_exec_tests): Use $CC or $CXX to link, not $ld.
Don't run exe when not native, and return unsupported.
* testsuite/ld-bootstrap/bootstrap.exp: Create gccld1 etc. dirs.
Link ld1 etc. using $CC.
* testsuite/ld-cdtest/cdtest.exp: Link cdtest using $CC.
* testsuite/ld-checks/checks.exp: Use ld_link, not ld_simple_link.
* testsuite/ld-cygwin/exe-export.exp: Likewise.
* testsuite/ld-elf/binutils.exp: Likewise.
* testsuite/ld-elf/eh-group.exp: Likewise.
* testsuite/ld-elf/exclude.exp: Likewise.
* testsuite/ld-elf/frame.exp: Likewise.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* testsuite/ld-elf/tls_common.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-fastcall/fastcall.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-ifunc/binutils.exp: Likewise.
* testsuite/ld-mep/mep.exp: Likewise.
* testsuite/ld-mips-elf/mips-elf-flags.exp: Likewise.
* testsuite/ld-mn10300/mn10300.exp: Likewise.
* testsuite/ld-nios2/nios2.exp: Likewise.
* testsuite/ld-pe/pe-compile.exp: Likewise.
* testsuite/ld-pe/pe-run.exp: Likewise.
* testsuite/ld-pe/pe-run2.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-scripts/align.exp: Likewise.
* testsuite/ld-scripts/alignof.exp: Likewise.
* testsuite/ld-scripts/assert.exp: Likewise.
* testsuite/ld-scripts/defined.exp: Likewise.
* testsuite/ld-scripts/extern.exp: Likewise.
* testsuite/ld-scripts/log2.exp: Likewise.
* testsuite/ld-scripts/map-address.exp: Likewise.
* testsuite/ld-scripts/phdrs.exp: Likewise.
* testsuite/ld-scripts/phdrs2.exp: Likewise.
* testsuite/ld-scripts/script.exp: Likewise.
* testsuite/ld-scripts/section-flags.exp: Likewise.
* testsuite/ld-scripts/sizeof.exp: Likewise.
* testsuite/ld-scripts/sysroot-prefix.exp: Likewise.
* testsuite/ld-scripts/weak.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-sh/sh.exp: Likewise.
* testsuite/ld-sh/sh64/relax.exp: Likewise.
* testsuite/ld-sh/sh64/relfail.exp: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/ld-tic6x/tic6x.exp: Likewise.
* testsuite/ld-undefined/weak-undef.exp: Likewise.
* testsuite/ld-versados/versados.exp: Likewise.
* testsuite/ld-x86-64/dwarfreloc.exp: Likewise.
* testsuite/ld-xtensa/coalesce.exp: Likewise.
* testsuite/ld-xtensa/diff_overflow.exp: Likewise.
* testsuite/ld-xtensa/lcall.exp: Likewise.
* testsuite/ld-elf/audit.exp: Run non-native too.
* testsuite/ld-elf/compress.exp: Likewise. Replace ld options with
gcc -Wl, options.
* testsuite/ld-elf/dwarf.exp: Run non-native too. Use ld_link,
not ld_simple_link. Add -Wl,--no-as-needed to some tests.
* testsuite/ld-elf/elf.exp: Run non-native too. Formatting.
* testsuite/ld-elf/indirect.exp: Run non-native too. Add
-Wl,--no-as-needed to most tests.
* testsuite/ld-elf/shared.exp: Run non-native too. Use braces
to simplify quoting. Set run_tests using [list] rather than
brace assignment to expand $extralibs. Add -Wl,--no-as-needed
to many test. Prefix ld options with -Wl,.
(mix_pic_and_non_pic): Don't run exe if not native.
* testsuite/ld-elf/wrap.exp: Run non-native too. Add
-Wl,--no-as-needed and prefix ld options with -Wl,.
* testsuite/ld-elfvers/vers.exp: Run non-native too. Use ld_link,
not ld_simple_link.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
(visibility_test): Don't run exe if not native.
* testsuite/ld-elfweak/elfweak.exp: Run non-native too. Use ld_link,
not ld_simple_link.
(build_exec): Don't run exe if not native.
* testsuite/ld-ifunc/ifunc.exp: Run non-native too. Use ld_link,
not ld_simple_link. Link using $CC. Add -Wl,--no-as-needed
to some tests and prefix ld options with -Wl,. Expect GNU
for hppa-linux even when no ifuncs. Delete cleanup.
* testsuite/ld-pie/pie.exp: Run non-native too.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise. Use ld_link,
not ld_simple_link.
(shared_test): Don't run exe if not native.
* testsuite/ld-size/size.exp: Run non-native too. Add
-Wl,--no-as-needed to some tests. Prefix ld options with -Wl,.
* testsuite/ld-unique/unique.exp: Run non-native too. Use ld_link,
not ld_simple_link. Link using $CC. Add -Wl,--no-as-needed
to some tests and prefix ld options with -Wl,. Expect GNU
for hppa-linux even when no unique syms. Delete cleanup.
* testsuite/ld-x86-64/tls.exp: Add -Wl,--no-as-needed to some
tests and prefix ld options with -Wl,.
* testsuite/ld-x86-64/x86-64.exp: Use ld_link, not ld_simple_link.
Add -Wl,--no-as-needed to some tests. Prefix ld options with -Wl,.
|
|
|
|
* NEWS: Mention new PRU target.
* Makefile.am: Add PRU target.
* configure.tgt: Ditto.
* emulparams/pruelf.sh: New file.
* emultempl/pruelf.em: New file.
* scripttempl/pru.sc: New file.
* Makefile.in: Regenerate.
* testsuite/ld-pru/emit-relocs-1.d: New PRU testcase file.
* testsuite/ld-pru/emit-relocs-1.ld: Ditto.
* testsuite/ld-pru/emit-relocs-1a.s: Ditto.
* testsuite/ld-pru/emit-relocs-1b.s
* testsuite/ld-pru/ldi32.d: Ditto.
* testsuite/ld-pru/ldi32.s: Ditto.
* testsuite/ld-pru/ldi32_symbol.s: Ditto.
* testsuite/ld-pru/norelax_ldi32-data.d: Ditto.
* testsuite/ld-pru/norelax_ldi32-dis.d: Ditto.
* testsuite/ld-pru/pcrel_s10.d: Ditto.
* testsuite/ld-pru/pcrel_s10.s: Ditto.
* testsuite/ld-pru/pcrel_s10_label.s: Ditto.
* testsuite/ld-pru/pcrel_u8-illegal.d: Ditto.
* testsuite/ld-pru/pcrel_u8-illegal.s: Ditto.
* testsuite/ld-pru/pcrel_u8-illegal2.d: Ditto.
* testsuite/ld-pru/pcrel_u8-illegal2.s: Ditto.
* testsuite/ld-pru/pcrel_u8-illegal3.d: Ditto.
* testsuite/ld-pru/pcrel_u8-illegal3.s: Ditto.
* testsuite/ld-pru/pcrel_u8.d: Ditto.
* testsuite/ld-pru/pcrel_u8.s: Ditto.
* testsuite/ld-pru/pcrel_u8_label.s: Ditto.
* testsuite/ld-pru/pmem.d: Ditto.
* testsuite/ld-pru/pmem.s: Ditto.
* testsuite/ld-pru/pmem_symbol.s: Ditto.
* testsuite/ld-pru/pru.exp: Ditto.
* testsuite/ld-pru/relax_ldi32-data.d: Ditto.
* testsuite/ld-pru/relax_ldi32-dis.d: Ditto.
* testsuite/ld-pru/relax_ldi32.s: Ditto.
* testsuite/ld-pru/relax_ldi32_symbol.s: Ditto.
* testsuite/ld-pru/reloc.d: Ditto.
* testsuite/ld-pru/reloc.s: Ditto.
* testsuite/ld-pru/reloc_symbol.s: Ditto.
* testsuite/ld-pru/u16.d: Ditto.
* testsuite/ld-pru/u16.s: Ditto.
* testsuite/ld-pru/u16_symbol.s: Ditto.
PRU does not export __end symbol because it is ambiguous for it.
Users are expected to use instead the section markers __text_end,
__data_end, __bss_end or __noinit_end.
* testsuite/lib/ld-lib.exp (check_shared_lib_support): No shared
libraries are supported for PRU.
(check_gc_sections_available): Mark PRU as not supported.
* testsuite/ld-elf/eh-frame-hdr.d: Disable for PRU.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/group8a.d: Likewise.
* testsuite/ld-elf/group8b.d: Likewise.
* testsuite/ld-elf/group9a.d: Likewise.
* testsuite/ld-elf/group9b.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr12851.d: Likewise.
* testsuite/ld-elf/pr14926.d: Likewise.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* testsuite/ld-elf/sec64k.exp: Mark sec64k case as too big for PRU.
* testsuite/ld-srec/srec.exp (run_srec_test): Add setup for PRU.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
|
|
* configure.ac: Add fuchsia to targets that use ELF.
* configure: Regenerated.
bfd * configure.tgt: Add support for fuchsia (OS).
gas * configure.tgt: Add support for fuchsia (OS).
ld * Makefile.am: Add dependency information for earmelf_fuchsia.c.
* Makefile.in: Regenerate.
* configure.tgt: Add support for aarch64-*-fuchsia, arm*-*-fuchsia*, and
x86_64-*-fuchsia* targets.
* emulparams/armelf_fuchsia.sh: New file.
* emulparams/armelfb_fuchsia.sh: New file.
|
|
bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf.
* config.bdf: Likewise.
* configure.ac: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* archures.c: Add bfd_riscv_arch.
* reloc.c: Add riscv relocs.
* targets.c: Add riscv_elf32_vec and riscv_elf64_vec.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id.
* elfnn-riscv.c: New file.
* elfxx-riscv.c: New file.
* elfxx-riscv.h: New file.
binutils* readelf.c (guess_is_rela): Add EM_RISCV.
(get_machine_name): Likewise.
(dump_relocations): Add support for riscv relocations.
(get_machine_flags): Add support for riscv flags.
(is_32bit_abs_reloc): Add R_RISCV_32.
(is_64bit_abs_reloc): Add R_RISCV_64.
(is_none_reloc): Add R_RISCV_NONE.
* testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv.
Expect the debug_ranges test to fail.
gas * Makefile.am: Add riscv files.
* Makefile.in: Regenerate.
* NEWS: Mention the support for this architecture.
* configure.in: Define a default architecture.
* configure: Regenerate.
* configure.tgt: Add entries for riscv.
* doc/as.texinfo: Likewise.
* testsuite/gas/all/gas.exp: Expect the redef tests to fail.
* testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail.
* config/tc-riscv.c: New file.
* config/tc-riscv.h: New file.
* doc/c-riscv.texi: New file.
* testsuite/gas/riscv: New directory.
* testsuite/gas/riscv/riscv.exp: New file.
* testsuite/gas/riscv/t_insns.d: New file.
* testsuite/gas/riscv/t_insns.s: New file.
ld * Makefile.am: Add riscv files.
* Makefile.in: Regenerate.
* NEWS: Mention the support for this target.
* configure.tgt: Add riscv entries.
* emulparams/elf32lriscv-defs.sh: New file.
* emulparams/elf32lriscv.sh: New file.
* emulparams/elf64lriscv-defs.sh: New file.
* emulparams/elf64lriscv.sh: New file.
* emultempl/riscvelf.em: New file.
opcodes * configure.ac: Add entry for bfd_riscv_arch.
* configure: Regenerate.
* disassemble.c (disassembler): Add support for riscv.
(disassembler_usage): Likewise.
* riscv-dis.c: New file.
* riscv-opc.c: New file.
include * dis-asm.h: Add prototypes for print_insn_riscv and
print_riscv_disassembler_options.
* elf/riscv.h: New file.
* opcode/riscv-opc.h: New file.
* opcode/riscv.h: New file.
|
|
* Makefile.am (CFLAGS_FOR_TARGET): Define as a copy of CFLAGS but
without any sanitization options.
(CXXFLAGS_FOR_TARGET): Define as a copy of CXXFLAGS but without
any sanitization options.
(check-DEJAGNU): Pass CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET
as CFLAGS and CXXFLAGS respectively.
|
|
Make BFD_ALIGN available to objcopy. Fix assertions. Don't use
bfd_log2 in ppc32elf.em or bfd_malloc in xtensaelf.em and bucomm.c.
bfd/
* libbfd-in.h (BFD_ALIGN): Move to..
* bfd-in.h: ..here.
* elf32-ppc.h (struct ppc_elf_params): Add pagesize.
* elf32-ppc.c (default_params): Adjust init.
(ppc_elf_link_params): Set pagesize_p2.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
binutils/
* ar.c: Don't include libbfd.h.
* objcopy.c: Likewise.
* bucomm.c (bfd_get_archive_filename): Use xmalloc rather than
bfd_malloc.
gas/
* config/bfin-parse.y: Don't include libbfd.h.
* config/tc-bfin.c: Likewise.
* config/tc-rl78.c: Likewise.
* config/tc-rx.c: Likewise.
* config/tc-metag.c: Likewise.
(create_dspreg_htabs, create_scond_htab): Use gas_assert not BFD_ASSERT.
* Makefile.am: Update dependencies.
* Makefile.in: Regenerate.
ld/
* ldlang.c: Don't include libbfd.h.
* emultempl/nds32elf.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/ppc32elf.em: Likewise.
(pagesize): Delete.
(params): Update init.
(ppc_after_open_output): Use params.pagesize. Don't call bfd_log2.
(PARSE_AND_LIST_ARGS_CASES): Use params.pagesize.
* emultempl/sh64elf.em: Don't include libbfd.h.
(after_allocation): Use ASSERT, not BFD_ASSERT.
* emultempl/xtensaelf.em: Don't include libbfd.h.
(replace_insn_sec_with_prop_sec): Use xmalloc, not bfd_malloc.
* Makefile.am: Update dependencies.
* Makefile.in: Regenerate.
|
|
bfd * config.bfd: Add entry for arm-phoenix.
gas * configuse.tgt: Add entry for arm-phoenix.
ld * Makefile.am: Add earmelf_phoenix.c.
* Makefile.in: Regenerate.
* configure.tgt: Add entry for arm-phoenix.
* emulparams/armelf_phoenix.sh: New file.
|
|
The plugin is called to claim symbols in an archive element from
plugin_object_p. But those symbols aren't needed to create output.
They are defined and referenced only within IR. get_symbols should
return resolution based on IR symbol kinds.
PR ld/20070
* Makefile.am (noinst_LTLIBRARIES): Add libldtestplug4.la.
(libldtestplug4_la_SOURCES): New.
(libldtestplug4_la_CFLAGS): Likewise.
(libldtestplug4_la_LDFLAGS): Likewise.
* Makefile.in: Regenerated.
* plugin.c (get_symbols): Return resolution based on IR symbol
kinds for symbols defined/referenced only within IR.
* testplug4.c: New file.
* ld/testsuite/ld-plugin/pr20070.d: Likewise.
* ld/testsuite/ld-plugin/pr20070a.c: Likewise.
* ld/testsuite/ld-plugin/pr20070b.c: Likewise.
* testsuite/ld-plugin/plugin.exp (plugin4_name): New.
(plugin4_path): Likewise.
Add a test for ld/20070.
|
|
* Makefile.am (ealphavms.c, eelf64_ia64_vms): Correct .em deps.
* Makefile.in: Regenerate.
|
|
Add -z noreloc-overflow command-line option to the x86-64 ELF linker to
disable relocation overflow check. This can be used to avoid relocation
overflow check if there will be no dynamic relocation overflow at
run-time.
bfd/
PR ld/19807
* elf64-x86-64.c (elf_x86_64_relocate_section): Check
no_reloc_overflow_check to diable R_X86_64_32/R_X86_64_32S
relocation overflow check.
include/
PR ld/19807
* bfdlink.h (bfd_link_info): Add no_reloc_overflow_check.
ld/
PR ld/19807
* Makefile.am (ELF_X86_DEPS): Add
$(srcdir)/emulparams/reloc_overflow.sh.
* Makefile.in: Regenerated.
* NEWS: Mention -z noreloc-overflow.
* ld.texinfo: Document -z noreloc-overflow.
* emulparams/elf32_x86_64.sh: Source
${srcdir}/emulparams/reloc_overflow.sh.
* emulparams/elf_x86_64.sh: Likewise.
* emulparams/reloc_overflow.sh: New file.
* testsuite/ld-x86-64/pr19807-1.s: New file.
* testsuite/ld-x86-64/pr19807-1a.d: Likewise.
* testsuite/ld-x86-64/pr19807-1b.d: Likewise.
* testsuite/ld-x86-64/pr19807-2.s: Likewise.
* testsuite/ld-x86-64/pr19807-2a.d: Likewise.
* testsuite/ld-x86-64/pr19807-2b.d: Likewise.
* testsuite/ld-x86-64/pr19807-2c.d: Likewise.
* testsuite/ld-x86-64/pr19807-2d.d: Likewise.
* testsuite/ld-x86-64/pr19807-2e.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/19807 tests.
|
|
For i386 and x86-64, non-PIC references to undefined weak symbols are
resolved without dynamic relocation when creating executable. Resolved
undefined weak symbols are removed from the dynamic symbol table in
executable. One exception is on i386, we need resolved undefined weak
symbols in the dynamic symbol table in PIE if input relocatable files
contain branchs without PLT so that we can branch to 0 with dynamic
relocation in text section.
This makes behaviors of dynamic executable and position independent
executable predictable with mixed PIC and non-PIC references to undefined
weak symbols. If all references to undefined weak symbols are PIC,
dynamic relocations against undefined weak symbols will be generated
in executable unless -z nodynamic-undefined-weak is passed to linker.
bfd/
PR ld/19636
PR ld/19704
PR ld/19719
* elf32-i386.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): New.
(elf_i386_link_hash_entry): Add has_got_reloc and
has_non_got_reloc.
(elf_i386_link_hash_table): Add interp.
(elf_i386_link_hash_newfunc): Initialize has_got_reloc and
has_non_got_reloc.
(elf_i386_copy_indirect_symbol): Copy has_got_reloc and
has_non_got_reloc.
(elf_i386_check_relocs): Set has_got_reloc and has_non_got_reloc.
(elf_i386_fixup_symbol): New function.
(elf_i386_pie_finish_undefweak_symbol): Likewise.
(elf_i386_allocate_dynrelocs): Don't allocate space for dynamic
relocations and discard relocations against resolved undefined
weak symbols in executable. Don't make resolved undefined weak
symbols in executable dynamic. Keep dynamic non-GOT/non-PLT
relocation against undefined weak symbols in PIE.
(elf_i386_size_dynamic_sections): Set interp to .interp section.
(elf_i386_relocate_section): Don't generate dynamic relocations
against resolved undefined weak symbols in PIE, except for
R_386_PC32.
(elf_i386_finish_dynamic_symbol): Keep PLT/GOT entries without
dynamic PLT/GOT relocations for resolved undefined weak symbols.
Don't generate dynamic relocation against resolved undefined weak
symbol in executable.
(elf_i386_finish_dynamic_sections): Call
elf_i386_pie_finish_undefweak_symbol on all symbols in PIE.
(elf_backend_fixup_symbol): New.
* elf64-x86-64.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): New.
(elf_x86_64_link_hash_entry): Add has_got_reloc and
has_non_got_reloc.
(elf_x86_64_link_hash_table): Add interp.
(elf_x86_64_link_hash_newfunc): Initialize has_got_reloc and
has_non_got_reloc.
(elf_x86_64_copy_indirect_symbol): Copy has_got_reloc and
has_non_got_reloc.
(elf_x86_64_check_relocs): Set has_got_reloc and
has_non_got_reloc.
(elf_x86_64_fixup_symbol): New function.
(elf_x86_64_pie_finish_undefweak_symbol): Likewise.
(elf_x86_64_allocate_dynrelocs): Don't allocate space for dynamic
relocations and discard relocations against resolved undefined
weak symbols in executable. Don't make resolved undefined weak
symbols in executable dynamic.
(elf_x86_64_size_dynamic_sections): Set interp to .interp section.
(elf_x86_64_relocate_section): Check relocation overflow for
dynamic relocations against unresolved weak undefined symbols.
Don't generate dynamic relocations against resolved weak
undefined symbols in PIE.
(elf_x86_64_finish_dynamic_symbol): Keep PLT/GOT entries without
dynamic PLT/GOT relocations for resolved undefined weak symbols.
Don't generate dynamic relocation against resolved undefined weak
symbol in executable.
(elf_x86_64_finish_dynamic_sections): Call
elf_x86_64_pie_finish_undefweak_symbol on all symbols in PIE.
(elf_backend_fixup_symbol): New.
include/
PR ld/19636
PR ld/19704
PR ld/19719
* bfdlink.h (bfd_link_info): Add dynamic_undefined_weak.
ld/
PR ld/19636
PR ld/19704
PR ld/19719
* Makefile.am (ELF_X86_DEPS): Add dynamic_undefined_weak.sh.
* Makefile.in: Regenerated.
* NEWS: Mention -z nodynamic-undefined-weak.
* ld.texinfo: Document -z nodynamic-undefined-weak.
* ldmain.c (main): Initialize dynamic_undefined_weak to -1.
* emulparams/dynamic_undefined_weak.sh: New file.
* emulparams/elf32_x86_64.sh: Source dynamic_undefined_weak.sh.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_i386_be.sh: Likewise.
* emulparams/elf_i386_chaos.sh: Likewise.
* emulparams/elf_i386_ldso.sh: Likewise.
* emulparams/elf_i386_vxworks.sh: Likewise.
* emulparams/elf_iamcu.sh: Likewise.
* emulparams/elf_k1om.sh: Likewise.
* emulparams/elf_l1om.sh: Likewise.
* emulparams/elf_x86_64.sh: Likewise.
* emulparams/extern_protected_data.sh (PARSE_AND_LIST_OPTIONS):
Append.
(PARSE_AND_LIST_ARGS_CASE_Z): Likewise.
* testsuite/ld-elf/pr19719a.c: New file.
* testsuite/ld-elf/pr19719b.c: Likewise.
* testsuite/ld-elf/pr19719c.c: Likewise.
* testsuite/ld-elf/pr19719d.c: Likewise.
* testsuite/ld-i386/pr19636-1.s: Likewise.
* testsuite/ld-i386/pr19636-1a.d: Likewise.
* testsuite/ld-i386/pr19636-1b.d: Likewise.
* testsuite/ld-i386/pr19636-1c.d: Likewise.
* testsuite/ld-i386/pr19636-1d-nacl.d: Likewise.
* testsuite/ld-i386/pr19636-1d.d: Likewise.
* testsuite/ld-i386/pr19636-1e.d: Likewise.
* testsuite/ld-i386/pr19636-1f.d: Likewise.
* testsuite/ld-i386/pr19636-1g.d: Likewise.
* testsuite/ld-i386/pr19636-1h.d: Likewise.
* testsuite/ld-i386/pr19636-1i.d: Likewise.
* testsuite/ld-i386/pr19636-2.s: Likewise.
* testsuite/ld-i386/pr19636-2a.d: Likewise.
* testsuite/ld-i386/pr19636-2b.d: Likewise.
* testsuite/ld-i386/pr19636-2c-nacl.d: Likewise.
* testsuite/ld-i386/pr19636-2c.d: Likewise.
* testsuite/ld-i386/pr19636-2d-nacl.d: Likewise.
* testsuite/ld-i386/pr19636-2d.d: Likewise.
* testsuite/ld-i386/pr19636-2e-nacl.d: Likewise.
* testsuite/ld-i386/pr19636-2e.d: Likewise.
* testsuite/ld-i386/pr19636-3.s: Likewise.
* testsuite/ld-i386/pr19636-3a.d: Likewise.
* testsuite/ld-i386/pr19636-3b.d: Likewise.
* testsuite/ld-i386/pr19636-3c.d: Likewise.
* testsuite/ld-i386/pr19636-3d.d: Likewise.
* testsuite/ld-i386/pr19636-3e.d: Likewise.
* testsuite/ld-i386/pr19636-3f.d: Likewise.
* testsuite/ld-i386/pr19636-3g.d: Likewise.
* testsuite/ld-i386/pr19636-4.s: Likewise.
* testsuite/ld-i386/pr19636-4a.d: Likewise.
* testsuite/ld-i386/pr19636-4b.d: Likewise.
* testsuite/ld-i386/pr19636-4c.d: Likewise.
* testsuite/ld-i386/pr19636-4d.d: Likewise.
* testsuite/ld-i386/pr19704.out: Likewise.
* testsuite/ld-i386/pr19704a.c: Likewise.
* testsuite/ld-i386/pr19704b.c: Likewise.
* testsuite/ld-x86-64/pr19636-1.s: Likewise.
* testsuite/ld-x86-64/pr19636-1a.d: Likewise.
* testsuite/ld-x86-64/pr19636-1b.d: Likewise.
* testsuite/ld-x86-64/pr19636-1c.d: Likewise.
* testsuite/ld-x86-64/pr19636-1d.d: Likewise.
* testsuite/ld-x86-64/pr19636-1e.d: Likewise.
* testsuite/ld-x86-64/pr19636-1f.d: Likewise.
* testsuite/ld-x86-64/pr19636-1g.d: Likewise.
* testsuite/ld-x86-64/pr19636-2.s: Likewise.
* testsuite/ld-x86-64/pr19636-2a.d: Likewise.
* testsuite/ld-x86-64/pr19636-2b.d: Likewise.
* testsuite/ld-x86-64/pr19636-2c.d: Likewise.
* testsuite/ld-x86-64/pr19636-2d-nacl.d: Likewise.
* testsuite/ld-x86-64/pr19636-2d.d: Likewise.
* testsuite/ld-x86-64/pr19636-2e.d: Likewise.
* testsuite/ld-x86-64/pr19636-2f.d: Likewise.
* testsuite/ld-x86-64/pr19636-2g.d: Likewise.
* testsuite/ld-x86-64/pr19636-2h.d: Likewise.
* testsuite/ld-x86-64/pr19636-2i.d: Likewise.
* testsuite/ld-x86-64/pr19636-3.s: Likewise.
* testsuite/ld-x86-64/pr19636-3a.d: Likewise.
* testsuite/ld-x86-64/pr19636-3b.d: Likewise.
* testsuite/ld-x86-64/pr19636-3c.d: Likewise.
* testsuite/ld-x86-64/pr19636-3d.d: Likewise.
* testsuite/ld-x86-64/pr19704.out: Likewise.
* testsuite/ld-x86-64/pr19704a.c: Likewise.
* testsuite/ld-x86-64/pr19704b.c: Likewise.
* testsuite/ld-elf/shared.exp (mix_pic_and_non_pic): New.
Run mix_pic_and_non_pic.
* testsuite/ld-i386/i386.exp (undefined_weak): New.
Run undefined_weak and PR ld/19636 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr13082-3b.d: Updated.
* testsuite/ld-x86-64/pr13082-4b.d: Likewise.
|
|
Define ELF_X86_DEPS with $(ELF_DEPS) plus emulparams/plt_unwind.sh,
extern_protected_data.sh and call_nop.sh.
* Makefile.am (ELF_X86_DEPS): New.
(eelf_i386.c): Replace $(ELF_DEPS) with $(ELF_X86_DEPS).
(eelf_i386_chaos.c): Likewise.
(eelf_i386_fbsd.c): Likewise.
(eelf_i386_ldso.c): Likewise.
(eelf_i386_nacl.c): Likewise.
(eelf_i386_sol2.c): Likewise.
(eelf_iamcu.c): Likewise.
(eelf32_x86_64.c): Likewise.
(eelf32_x86_64_nacl.c): Likewise.
(eelf_l1om.c): Likewise.
(eelf_l1om_fbsd.c): Likewise.
(eelf_k1om.c): Likewise.
(eelf_k1om_fbsd.c): Likewise.
(eelf_x86_64.c): Likewise.
(eelf_x86_64_cloudabi.c): Likewise.
(eelf_x86_64_fbsd.c): Likewise.
(eelf_x86_64_sol2.c): Likewise.
* Makefile.in: Regenerated.
|
|
executable.
* Makefile.am (CXX_FOR_TARGET): Check for the presence of an
in-tree xg++ executable after checking for the presence of an
in-tree g++ executable.
* Makefile.in: Regenerate.
|
|
|
|
ld * Makefile.am (ALL_64_EMULATION_SOURCES): Add support for
CloudABI on aarch64. For this target we have to make sure we use
ELFOSABI_CLOUDABI instead of ELFOSABI_NONE.
* configure.tgt (targ_emul): Likewise.
* emulparams/aarch64cloudabi.sh: New file.
* emulparams/aarch64cloudabib.sh: New file.
* Makefile.in: Regenerate.
bfd * config.bfd (targ_defvec): Add support for CloudABI on aarch64.
For this target we have to make sure we use ELFOSABI_CLOUDABI
instead of ELFOSABI_NONE.
* configure.ac (tb): Likewise.
* elfnn-aarch64.c: Likewise.
* targets.c (_bfd_target_vector): Likewise.
* configure: Regenerate.
gas * config/tc-aarch64.c (elf64_aarch64_target_format): Select the
cloudabi format if the TARGET_OS is cloudabi.
|
|
bfd * archures.c: Remove support for older ARC. Added support for new
ARC cpus (ARC600, ARC601, ARC700, ARCV2).
* bfd-in2.h: Likewise.
* config.bfd: Likewise.
* cpu-arc.c: Likewise.
* elf32-arc.c: Totally changed file with a refactored
inplementation of the ARC port.
* libbfd.h: Added ARC specific relocation types.
* reloc.c: Likewise.
gas * config/tc-arc.c: Revamped file for ARC support.
* config/tc-arc.h: Likewise.
* doc/as.texinfo: Add new ARC options.
* doc/c-arc.texi: Likewise.
ld * configure.tgt: Added target arc-*-elf* and arc*-*-linux-uclibc*.
* emulparams/arcebelf_prof.sh: New file
* emulparams/arcebelf.sh: Likewise.
* emulparams/arceblinux_prof.sh: Likewise.
* emulparams/arceblinux.sh: Likewise.
* emulparams/arcelf_prof.sh: Likewise.
* emulparams/arcelf.sh: Likewise.
* emulparams/arclinux_prof.sh: Likewise.
* emulparams/arclinux.sh: Likewise.
* emulparams/arcv2elfx.sh: Likewise.
* emulparams/arcv2elf.sh: Likewise.
* emultempl/arclinux.em: Likewise.
* scripttempl/arclinux.sc: Likewise.
* scripttempl/elfarc.sc: Likewise.
* scripttempl/elfarcv2.sc: Likewise
* Makefile.am: Add new ARC emulations.
* Makefile.in: Regenerate.
* NEWS: Mention the new feature.
opcodes * arc-dis.c: Revamped file for ARC support
* arc-dis.h: Likewise.
* arc-ext.c: Likewise.
* arc-ext.h: Likewise.
* arc-opc.c: Likewise.
* arc-fxi.h: New file.
* arc-regs.h: Likewise.
* arc-tbl.h: Likewise.
binutils * readelf.c (get_machine_name): Remove A5 reference. Add ARCompact
and ARCv2.
(get_machine_flags): Handle EM_ARCV2 and EM_ARCOMPACT.
(guess_is_rela): Likewise.
(dump_relocations): Likewise.
(is_32bit_abs_reloc): Likewise.
(is_16bit_abs_reloc): Likewise.
(is_none_reloc): Likewise.
* NEWS: Mention the new feature.
include * dis-asm.h (arc_get_disassembler): Correct declaration.
* arc-reloc.def: Macro file with definition of all relocation
types.
* arc.h: Changed macros for the newly supported ARC cpus. Altered
enum defining the supported relocations.
* common.h: Changed EM_ARC_A5 definition to EM_ARC_COMPACT. Added
macro for EM_ARC_COMPACT2.
* arc-func.h: New file.
* arc.h: Likewise.
|
|
* Makefile.am (eelf32or1k.c, eelf32or1k_linux.c): Depend on ELF_DEPS.
* Makefile.in: Regenerate.
|
|
-m elf_iamcu must be passed to i386 linker to generate Intel MCU binary.
ld/
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf_iamcu.c.
(eelf_iamcu.c): New.
* configure.tgt (targ_extra_emuls): Add elf_iamcu if elf_i386 is
enabled in BFD.
* Makefile.in: Regenerated.
* emulparams/elf_iamcu.sh: New file.
ld/testsuite/
* ld-i386/abs-iamcu.d: New file.
* ld-i386/dummy.s: Likewise.
* ld-i386/foo.s: Likewise.
* ld-i386/iamcu-1.d: Likewise.
* ld-i386/iamcu-2.d: Likewise.
* ld-i386/iamcu-3.d: Likewise.
* ld-i386/start.s: Likewise.
* ld-i386/i386.exp (iamcu_tests): New.
Run iamcu_tests.
|
|
data into either low or high memory regions.
gas * config/tc-msp430.c (MAX_OP_LEN): Increase to 4096.
(msp430_make_init_symbols): New function.
(msp430_section): Call it.
(msp430_frob_section): Likewise.
ld * emulparams/msp430elf.sh (TEMPLATE_NAME): Change to msp430.
* scripttempl/msp430.sc (.text): Add .lower.text and .either.text.
(.data): Add .lower.data and .either.data.
(.bss): Add .lower.bss and .either.bss.
(.rodata): Add .lower.rodata and .either.rodata.
* emultempl/msp430.em: New file. Implements a new orphan
placement algorithm that divides sections between lower and upper
memory regions.
* Makefile.am (emsp430elf.c): Depend upon msp430.em.
*emsp430X.c): Likewise.
* Makefine.in: Regenerate.
|
|
* Makefile.am (msp430): Rename primary emulation to msp430elf.
(emsp430.c): Rename to emsp430elf.c, update dependencies
(emsp430X.c): Update dependencies.
* Makefile.in: Likewise.
* configure.tgt (msp430-*-*): Rename primary emulation to msp430elf.
* emulparame/msp430.sh: Rename to msp430elf.sh.
* emulparams/msp430X.sh: Update.
|
|
This patch adds ld_list_options for ELF targets to avoid duplicated
outputs from ld --help.
* Makefile.am (ELF_CLFAGS): New.
(AM_CFLAGS): Add $(ELF_CLFAGS).
* configure.ac (elf_list_options): New. AC_SUBST.
(elf_shlib_list_options): Likewise.
(elf_plt_unwind_list_options): Likewise.
* lexsup.c (elf_shlib_list_options): New.
(elf_static_list_options): Likewise.
(elf_plt_unwind_list_options): Likewise.
(ld_list_options): Likewise.
(help): Call ld_list_options.
* Makefile.in: Regenerated.
* configure: Likewise.
* emulparams/plt_unwind.sh (PLT_UNWIND): New.
(PARSE_AND_LIST_OPTIONS): Removed.
* emultempl/elf32.em (gld_list_options): New.
(gld${EMULATION_NAME}_list_options): Define only if BNDPLT or
PARSE_AND_LIST_OPTIONS is defined.
(ld_${EMULATION_NAME}_emulation): Replace
gld${EMULATION_NAME}_list_options with ${gld_list_options.
|
|
ld * Makefile.am: Add FreeBSD aarch64 files.
* Makefile.in: Regenerate.
* configure.tgt: Add aarch64-*-freebsd* target triple.
* emulparams/aarch64fbsd.sh: New file.
* emulparams/aarch64fbsdb.sh: New file.
bfd * config.bfd: Add aarch64-*-freebsd* target triple.
|
|
* Makefile.am (eelf32ppcvxworks.c): Depend on ppc32elf.em and
ldemul-list.h.
(eelf32lppc.c, eelf32lppclinux.c, eelf32lppcnto.c, eelf32lppcsim.c,
eelf32ppc.c, eelf32ppc_fbsd.c, eelf32ppclinux.c, eelf32ppcnto.c,
eelf32ppcsim.c): Rearrange deps for consistency.
* Makefile.in: Regenerate.
|
|
bfd/
* config.bfd (targ_defvec): Set to x86_64_elf64_cloudabi_vec
for x86_64-*-cloudabi*.
* configure.ac: Handle x86_64_elf64_cloudabi_vec.
* configure: Regenerated.
* elf64-x86-64.c (TARGET_LITTLE_SYM): Support x86_64-*-cloudabi*.
(TARGET_LITTLE_NAME): Likewise.
(ELF_OSABI): Likewise.
(elf64_bed): Likewise.
* targets.c (x86_64_elf64_cloudabi_vec): New.
(_bfd_target_vector): Add x86_64_elf64_cloudabi_vec.
gas/
* configure.tgt (fmt): Set to elf for *-*-cloudabi*.
ld/
* Makefile.am (ALL_64_EMULATION_SOURCES): Add
eelf_x86_64_cloudabi.c.
(eelf_x86_64_cloudabi.c): New.
* configure.tgt (targ_emul): Set to elf_x86_64_cloudabi for
x86_64-*-cloudabi*.
* Makefile.in: Regenerated.
* emulparams/elf_x86_64_cloudabi.sh: New file.
|
|
* Makefile.am (ALL_EMULATION_SOURCES): Sort new h8300 entries.
(eh8300elf_linux.c, eh8300helf_linux.c, eh8300self_linux.c,
eh8300sxelf_linux.c): Do not invoke genscripts here.
* Makefile.in: Regenerate.
|
|
bfd * elf32-v850.c (v850_set_note): New function. Creates a Renesas
style note entry.
(v850_elf_make_note_section): New function. Creates a note
section.
(v850_elf_create_sections): New function. Create a note section
if one is not already present.
(v850_elf_set_note): New function. Adds a note to a bfd.
(v850_elf_copy_private_bfd_data): New function. Copies V850
notes.
(v850_elf_merge_notes): New function. Merges V850 notes.
(print_v850_note): New function. Displays a V850 note.
(v850_elf_print_notes): New function. Displays all notes attached
to a bfd.
(v850_elf_merge_private_bfd_data): Call v850_elf_merge_notes.
(v850_elf_print_private_bfd_data): Call v850_elf_print_notes.
(v850_elf_fake_sections): Set the type of the V850 note section.
* bfd-in.h (v850_elf_create_sections): Add prototype.
(v850_elf_set_note): Add prototype.
* bfd-in2.h: Regenerate.
binutils* readelf.c (get_machine_flags): Remove deprecated V850 machine
flags.
(get_v850_section_type_name): New function. Handles V850 special
sections.
(get_section_type_name): Add support for V850.
(get_v850_elf_note_type): New function. Returns the name of a
V850 note.
(print_v850_note): New function. Prints a V850 note.
(process_v850_notes): New function. Prints V850 notes.
(process_note_sections): Add support for V850.
binutils/testsute
* binutils-all/objcopy.exp: Skip the strip-10 test for the V850.
gas * config/tc-v850.c (soft_float): New variable.
(v850_data_8): New variable.
(md_show_usage): Add -msoft-float/-mhard-float.
(md_parse_option): Likewise.
(md_begin): Set the default value of soft_float.
(v850_md_end): New function. Creates a note section.
* config/tc-v850.h (md_end): Define.
* doc/c-v850.texi: Document -msoft-float/-mhard-float.
gas/testsuite
* gas/elf/elf.exp: Add special version of the section2 test for
the V850.
* gas/elf/section2.e-v850: New file.
include/elf
* v850.h (EF_RH850_SIMD): Delete deprecated flag.
(EF_RH850_CACHE): Likewise.
(EF_RH850_MMU): Likewise.
(EF_RH850_DATA_ALIGN8): Likewise.
(SHT_RENESAS_IOP): Fix typo in name.
(SHT_RENESAS_INFO): Define.
(V850_NOTE_SECNAME): Define.
(SIZEOF_V850_NOTE): Define.
(V850_NOTE_NAME): Define.
(enum v850_notes): New enum.
(NUM_V850_NOTES): Define.
ld/ChangeLog
2015-02-24 Nick Clifton <nickc@redhat.com>
* Makefile.am (ev850.c): Add dependency upon
$(srcdir)/emultempl/v850elf.em.
(ev850_rh850.c): Likewise.
* Makefile.in: Regenerate.
* emultempl/v850elf.em: New file.
* emulparams/v850.sh (EXTRA_EM_FILE): Define.
* emulparams/v850_rh850.sh (EXTRA_EM_FILE): Define.
* scripttempl/v850.sc: Add .note.renesas section.
* scripttempl/v850_rh850.sc: Likewise.
ld/testsuite
* ld-elf/extract-symbol-1sec.d: Expect to fail on the V850.
|
|
ld * Makefile.am: (ALL_EMULATION_SOURCES): Add new emulations.
* Makefile.in: Regenerate.
* configure.tgt: Add h8300-*-linux
* emulparams/h8300elf_linux.sh: Add new emulation.
* emulparams/h8300helf_linux.sh: Likewise.
* emulparams/h8300self_linux.sh: Likewise.
* emulparams/h8300sxelf_linux.sh: Likewise.
bfd * config.bfd: Add h8300-*-linux.
* configure.ac: Add h8300_elf32_linux_vec.
* configure: Regenerate.
* elf32-h8300.c: Likewise.
* targets.c(_bfd_target_vector): Likewise.
gas * config/tc-h8300.c (line_separater_chars): Add a version for
h8300-linux that includes a separator.
(default_mach): New variable.
(md_main): Use it.
(md_longopts): Add '--march' option.
(md_parse_option): Parse the new option.
* config/tc-h8300.h (TARGET_FORMAT): Add elf32-h8300-linux.
* configure.tgt: Add h8300-*-linux
* doc/c-h8300.texi: Document --march.
|
|
This patch adds linker, nm and ar tests for non-object IR file, including
archive with non-object IR member.
ld/
PR ld/17878
* Makefile.am (noinst_LTLIBRARIES): Add libldtestplug2.la and
libldtestplug3.la.
(libldtestplug2_la_SOURCES): New.
(libldtestplug2_la_CFLAGS): Likewise.
(libldtestplug2_la_LDFLAGS): Likewise.
(libldtestplug3_la_SOURCES): New.
(libldtestplug3_la_CFLAGS): Likewise.
(libldtestplug3_la_LDFLAGS): Likewise.
* Makefile.in: Regenerated.
* testplug2.c: New file.
* testplug3.c: Likewise.
ld/testsuite/
PR ld/17878
* ld-plugin/func.c: Add some comments.
* ld-plugin/plugin-13.d: New file.
* ld-plugin/plugin-14.d: Likewise.
* ld-plugin/plugin-15.d: Likewise.
* ld-plugin/plugin-16.d: Likewise.
* ld-plugin/plugin-17.d: Likewise.
* ld-plugin/plugin-18.d: Likewise.
* ld-plugin/plugin-19.d: Likewise.
* ld-plugin/plugin-20.d: Likewise.
* ld-plugin/plugin-21.d: Likewise.
* ld-plugin/plugin-22.d: Likewise.
* ld-plugin/plugin-23.d: Likewise.
* ld-plugin/plugin-24.d: Likewise.
* ld-plugin/plugin-25.d: Likewise.
* ld-plugin/plugin-26.d: Likewise.
* ld-plugin/plugin.exp (plugin2_name): New.
(plugin3_name): Likewise.
(plugin2_path): Likewise.
(plugin3_path): Likewise.
(testsrcfiles): Likewise.
(testsrcfiles_notext): Likewise.
(plugin_tests): Add tests for non-object IR file.
(plugin_lib_tests): Likewise.
(plugin_extra_elf_tests): Likewise.
(plugin_src_tests): New tests for non-object IR file.
Run nm --plugin test.
Run ar --plugin test.
Run plugin_src_tests.
|
|
FT32 is a new 32-bit RISC core developed by FTDI for embedded applications.
* configure.ac: Add FT32 support.
* configure: Regenerate.
bfd/
* Makefile.am: Add FT32 files.
* archures.c (enum bfd_architecture): Add bfd_arch_ft32.
(bfd_mach_ft32): Define.
(bfd_ft32_arch): Declare.
(bfd_archures_list): Add bfd_ft32_arch.
* config.bfd: Handle FT32.
* configure.ac: Likewise.
* cpu-ft32.c: New file.
* elf32-ft32.c: New file.
* reloc.c (BFD_RELOC_FT32_10, BFD_RELOC_FT32_20, BFD_RELOC_FT32_17,
BFD_RELOC_FT32_18): Define.
* targets.c (_bfd_target_vector): Add ft32_elf32_vec.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* readelf.c: Add FT32 support.
gas/
* Makefile.am: Add FT32 files.
* config/tc-ft32.c: New file.
* config/tc-ft32.h: New file.
* configure.tgt: Add FT32 support.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
gas/testsuite/
* gas/ft32/ft32.exp: New file.
* gas/ft32/insn.d: New file.
* gas/ft32/insn.s: New file.
include/
* dis-asm.h (print_insn_ft32): Declare.
include/elf/
* common.h (EM_FT32): Define.
* ft32.h: New file.
include/opcode/
* ft32.h: New file.
ld/
* Makefile.am: Add FT32 files.
* configure.tgt: Handle FT32 target.
* emulparams/elf32ft32.sh: New file.
* scripttempl/ft32.sc: New file.
* Makefile.in: Regenerate.
opcodes/
* Makefile.am: Add FT32 files.
* configure.ac: Handle FT32.
* disassemble.c (disassembler): Call print_insn_ft32.
* ft32-dis.c: New file.
* ft32-opc.c: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
|
|
|
|
ld/
* configure.tgt: Add Visium support.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32visium.c.
(eelf32visium.c): New rule.
* Makefile.in: Regenerate.
* emulparams/elf32visium.sh: New file.
* scripttempl/visium.sc: Likewise.
ld/testsuite/
* lib/ld-lib.exp (check_shared_lib_support): Return 0 for Visium.
* ld-visium/: New directory.
|
|
|
|
This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all
binutils configure.in files. The BFD version is now in bfd/version.m4
rather than bfd/configure.in, which allows automake to automatically
track this dependency.
bfd/
* version.m4: New file.
* configure.in: Include version.m4.
(AC_INIT): Update.
* Makefile.am (RELEASE): Delete.
(bfdver.h): Depend on development.sh, use instead of RELEASE.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
opcodes/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
binutils/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* configure.com: Get bfd version from bfd/version.m4.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
ld/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
|
|
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
|
|
host.
* Makefile.am (ALL_EMULATION_SOURCES): Move ei386pep.c from
here...
(ALL_64_EMULATION_SOURCES): ... to here.
(ALL_EMUL_EXTRA_OFILES): Move pep-dll.o from here...
(ALL_64_EMUL_EXTRA_OFILES): New. ... to here.
* configure.in (EMUL_EXTRA_OFILES): Include
ALL_64_EMUL_EXTRA_OFILES when making a 64-bit enabled build.
* Makefile.in: Regenerate.
* configure: Regenerate.
|
|
ld/ChangeLog:
2014-06-18 Andreas Tobler <andreast@fgznet.ch>
* configure.tgt (arm*-*-freebsd*): Update targ_extra_emuls.
(arm*b-*-freebsd*): Add target.
* emulparams/armelfb_fbsd.sh: Added.
* emulparams/armelf_fbsd.sh: Updated.
* Makefile.am (ALL_EMULATION_SOURCES): Add earmelfb_fbsd.c.
* Makefile.in: Regenerate.
|
|
and fix more nds32 dependencies.
* scripttempl/elf.sc: Edit out __rela_iplt symbol assignments from
.rel sections, and __rel_iplt from .rela sections.
* scripttempl/nds32elf.sc: Likewise.
* Makefile.am (ends32*.c): Depend on nds32elf.sc.
* Makefile.in: Regenerate.
|
|
* Makefile.am (ALL_EMULATION_SOURCES): Add enios2elf.c, enios2linux.c.
* Makefile.in: Regenerate.
|
|
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
|
|
bfin, msp, and score all used an extra parameter to genscripts.sh
to select a "customizer_script" different from the standard one
named from the emulation. This patch renames the scripts to avoid
the need, tidying them in the process.
* emulparams/elf32bfin.sh: Rename from bfin.sh.
* emulparams/elf32bfinfd.sh: Update to suit.
* emulparams/: Delete.
* emulparams/msp430.sh: Rename from msp430all.sh. Remove
MSP430_NAME and msp430X vars.
* emulparams/msp430X.sh: New.
* emulparams/: Delete.
* emulparams/score3_elf.sh: Rename from scoreelf.sh. Remove
SCORE_NAME and score7_elf ARCH setting.
* emulparams/score7_elf.sh: New.
* Makefile.am (eelf32bfin.c, eelf32bfinfd.c): Update dependencies.
(emsp430.c, emsp430X.c, escore3_elf.c, escore7_elf.c): Likewise.
* Makefile.in: Regenerate.
* genscripts.sh: Delete customizer_script param.
|
|
* Makefile.am: Change all rules with ${GENSCRIPTS}
invocations to be just dependencies.
($(ALL_EMULATION_SOURCES) $(ALL_64_EMULATION_SOURCES))
(run-genscripts): New rules.
* Makefile.in: Regenerate.
|
|
ld:
* Makefile.am (ALL_EMULATION_SOURCES): Add missing eelf32mbel_linux.c.
* Makefile.in: Regenerate.
|
|
with support for the new or1k configuration.
|
