aboutsummaryrefslogtreecommitdiff
path: root/ld/ChangeLog
AgeCommit message (Collapse)AuthorFilesLines
2019-09-18bfd_asymbol_* macrosAlan Modra1-0/+5
The main point of this patch is to give bfd_get_section a better name, bfd_asymbol_section. bfd/ * bfd-in.h (bfd_asymbol_section): Rename from bfd_get_section. (bfd_get_output_section): Delete. (bfd_asymbol_base): Delete. (bfd_asymbol_section, bfd_asymbol_value, bfd_asymbol_name), (bfd_asymbol_bfd, bfd_asymbol_flavour): Tidy. (bfd_set_asymbol_name): New macro. * bfd-in2.h: Regenerate. * aout-cris.c: Update throughout to use bfd_asymbol_section. * aoutx.h: Likewise. * cofflink.c: Likewise. * dwarf2.c: Likewise. * ecoff.c: Likewise. * elf.c: Likewise. * elf32-arm.c: Likewise. * elf32-mips.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elfn32-mips.c: Likewise. * elfnn-aarch64.c: Likewise. * elfxx-mips.c: Likewise. * linker.c: Likewise. * pdp11.c: Likewise. * elf64-mmix.c (mmix_elf_reloc): Expand bfd_get_output_section. binutils/ * nm.c: Update bfd_get_section to bfd_asymbol_section throughout. * objcopy.c: Likewise. * objdump.c: Likewise. * rdcoff.c: Likewise. * objcopy.c (create_new_symbol): Use bfd_set_asymbol_name. (filter_symbols): Likewise. gas/ * symbols.c (S_IS_LOCAL): Update bfd_get_section to bfd_asymbol_section. gdb/ * arm-tdep.c (arm_record_special_symbol): Update bfd_get_section to bfd_asymbol_section. ld/ * ldcref.c (check_reloc_refs): Update bfd_get_section to bfd_asymbol_section.
2019-09-18Re-generate many configure and Makefile.in filesSimon Marchi1-0/+5
I get some spurious changes when running autoconf/automake for various projects in the tree. This is likely because they were generated using distro-patched tools last time. I ran `autoreconf -f` in the various automake projects of the binutils-gdb tree, and this is the result. The tools I am using have been compiled from source, from the upstream release. bfd/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gas/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gold/ChangeLog: * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. ld/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. opcodes/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate.
2019-09-18Constify target name, reloc name, and carsym nameAlan Modra1-0/+5
bfd/ * bfd-in.h (carsym.name): Make const. * reloc.c (struct reloc_howto_struct.name): Likewise. * targets.c (bfd_target.name): Likewise.! * bfd.c (bfd_get_sign_extend_vma): Make variable const. * som.c (som_bfd_fill_in_ar_symbols): Use an intermediary variable when setting carsym.name. * bfd-in2.h: Regenerate. gdb/ * amd64-dicos-tdep.c (amd64_dicos_osabi_sniffer): Constify target. * i386-cygwin-tdep.c (i386_cygwin_init_abi): Likewise. * i386-dicos-tdep.c (i386_dicos_osabi_sniffer): Likewise. ld/ * ldlang.c (stricpy, strcut, name_compare): Constify params. (get_first_input_target): Make return and "target" const.
2019-09-18Use bfd_set_filename moreAlan Modra1-0/+5
Fixes a few leaks in bfd and ld. bfd/ * mach-o.c (bfd_mach_o_fat_member_init): Likewise. Replace xstrdup and xmalloc with bfd_strdup and bfd_malloc. Return an error status. Adjust calls. * vms-lib.c (_bfd_vms_lib_get_module): Test mhd->id earlier. Close bfd on failure. Replace xstrdup/bfd_alloc use with bfd_malloc. Use bfd_set_filename. gdb/ * solib-spu.c (spu_bfd_open): Use bfd_set_filename. * spu-linux-nat.c (spu_bfd_open): Likewise. ld/ * emultempl/pe.em (after_open): Use bfd_set_filename. * emultempl/pep.em (after_open): Use bfd_set_filename.
2019-09-16PR25002, ld/ldelf.c missing safe-ctype.h includeAlan Modra1-0/+5
PR 25002 * ldelf.c: Include safe-ctype.h.
2019-09-16Update version to 2.33.50 and regenerate configure scripts.Phil Blundell1-0/+4
2019-09-13Always add input_statement to statement_listAlan Modra1-0/+8
I think this is safer than leaving an input_statement added during open_input_bfds off the list. There are a number of places that fiddle with various lists and might be confused by an off-list statement, eg. orphan handling. * ldlang.c (new_afile): Remove add_to_list parameter. (lang_add_input_file): Update new_afile calls. (lookup_name): Splice input_statement added by new_afile into statement_list after current input_file_chain entry. (lang_process): Update comment.
2019-09-12LOAD in linker map fileAlan Modra1-0/+5
For some reason, commit 906e58cab5 2008-05-15 excluded input statements with BFD_LINKER_CREATED BFDs from being printed to map files. This isn't ideal since it loses claimed plugin BFDs. * ldlang.c (print_input_statement): Do not exclude linker created BFDs.
2019-09-12PR24981, Hit assertion failure in ld/ldlang.c:7504Alan Modra1-0/+5
This fixes a problem with commit 128bf1fe608, a patch I made 2019-08-06. Apparently it is possible to trigger the assertion I added during an LTO bootstrap, something I haven't reproduced. However, I did find a case triggered by an odd linker script feature that allows a file to be loaded from the script without specifying that file on the command line. Regarding input sections: "When you use a file name which is not an archive:file specifier and does not contain any wild card characters, the linker will first see if you also specified the file name on the linker command line or in an INPUT command. If you did not, the linker will attempt to open the file as an input file, as though it appeared on the command line." So putting .foo : { foo.a(*) } into a script supposedly extracts foo.a into .foo. Except it doesn't, since this feature is meant for object files only. Well anyway, assuming --whole-archive was given on the command line, foo.a contains a -flto object and no other objects involved were -flto then we'll hit the assert due to files added like foo.a here *not* having their input statement put on the general statement list. Why these are not put on the statement list isn't obvious but it has been that way since commit 193c5f93a17 in 1994. PR 24981 * ldlang.c (lang_process): Remove assertion. Comment.
2019-09-11Rename elf32.em to elf.emAlan Modra1-0/+206
* emultempl/elf32.em: Remove "misnamed" comment. Rename to.. * emultempl/elf.em: ..this. * configure.ac (elf_list_options): Adjust TEMPLATE_NAME grep. * emulparams/aarch64cloudabi.sh (TEMPLATE_NAME): Set to elf. * emulparams/aarch64elf.sh: Likewise. * emulparams/aarch64elf32.sh: Likewise. * emulparams/aarch64fbsd.sh: Likewise. * emulparams/aarch64linux.sh: Likewise. * emulparams/aarch64linux32.sh: Likewise. * emulparams/arcelf.sh: Likewise. * emulparams/arcelf_prof.sh: Likewise. * emulparams/arclinux.sh: Likewise. * emulparams/arclinux_prof.sh: Likewise. * emulparams/arcv2elf.sh: Likewise. * emulparams/arcv2elfx.sh: Likewise. * emulparams/armelf.sh: Likewise. * emulparams/armelf_fuchsia.sh: Likewise. * emulparams/armelf_linux.sh: Likewise. * emulparams/armelf_phoenix.sh: Likewise. * emulparams/armnto.sh: Likewise. * emulparams/avr1.sh: Likewise. * emulparams/avr2.sh: Likewise. * emulparams/avr25.sh: Likewise. * emulparams/avr3.sh: Likewise. * emulparams/avr31.sh: Likewise. * emulparams/avr35.sh: Likewise. * emulparams/avr4.sh: Likewise. * emulparams/avr5.sh: Likewise. * emulparams/avr51.sh: Likewise. * emulparams/avr6.sh: Likewise. * emulparams/avrtiny.sh: Likewise. * emulparams/avrxmega1.sh: Likewise. * emulparams/avrxmega2.sh: Likewise. * emulparams/avrxmega3.sh: Likewise. * emulparams/avrxmega4.sh: Likewise. * emulparams/avrxmega5.sh: Likewise. * emulparams/avrxmega6.sh: Likewise. * emulparams/avrxmega7.sh: Likewise. * emulparams/criself.sh: Likewise. * emulparams/crislinux.sh: Likewise. * emulparams/cskyelf.sh: Likewise. * emulparams/d10velf.sh: Likewise. * emulparams/elf32_sparc.sh: Likewise. * emulparams/elf32_spu.sh: Likewise. * emulparams/elf32_tic6x_le.sh: Likewise. * emulparams/elf32_x86_64.sh: Likewise. * emulparams/elf32am33lin.sh: Likewise. * emulparams/elf32bfin.sh: Likewise. * emulparams/elf32bfinfd.sh: Likewise. * emulparams/elf32bmip.sh: Likewise. * emulparams/elf32bmipn32-defs.sh: Likewise. * emulparams/elf32cr16.sh: Likewise. * emulparams/elf32cr16c.sh: Likewise. * emulparams/elf32crx.sh: Likewise. * emulparams/elf32epiphany.sh: Likewise. * emulparams/elf32epiphany_4x4.sh: Likewise. * emulparams/elf32frvfd.sh: Likewise. * emulparams/elf32ip2k.sh: Likewise. * emulparams/elf32lm32.sh: Likewise. * emulparams/elf32lm32fd.sh: Likewise. * emulparams/elf32lriscv-defs.sh: Likewise. * emulparams/elf32m32c.sh: Likewise. * emulparams/elf32mb_linux.sh: Likewise. * emulparams/elf32mbel_linux.sh: Likewise. * emulparams/elf32mcore.sh: Likewise. * emulparams/elf32mep.sh: Likewise. * emulparams/elf32metag.sh: Likewise. * emulparams/elf32microblaze.sh: Likewise. * emulparams/elf32mipswindiss.sh: Likewise. * emulparams/elf32or1k.sh: Likewise. * emulparams/elf32ppccommon.sh: Likewise. * emulparams/elf32rl78.sh: Likewise. * emulparams/elf32rx.sh: Likewise. * emulparams/elf32tilegx.sh: Likewise. * emulparams/elf32tilepro.sh: Likewise. * emulparams/elf32vax.sh: Likewise. * emulparams/elf32visium.sh: Likewise. * emulparams/elf32xc16x.sh: Likewise. * emulparams/elf32xc16xl.sh: Likewise. * emulparams/elf32xc16xs.sh: Likewise. * emulparams/elf32xstormy16.sh: Likewise. * emulparams/elf32xtensa.sh: Likewise. * emulparams/elf64_aix.sh: Likewise. * emulparams/elf64_ia64.sh: Likewise. * emulparams/elf64_s390.sh: Likewise. * emulparams/elf64_sparc.sh: Likewise. * emulparams/elf64alpha.sh: Likewise. * emulparams/elf64bpf.sh: Likewise. * emulparams/elf64hppa.sh: Likewise. * emulparams/elf64mmix.sh: Likewise. * emulparams/elf64rdos.sh: Likewise. * emulparams/elf64tilegx.sh: Likewise. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_i386_be.sh: Likewise. * emulparams/elf_i386_ldso.sh: Likewise. * emulparams/elf_i386_vxworks.sh: Likewise. * emulparams/elf_iamcu.sh: Likewise. * emulparams/elf_k1om.sh: Likewise. * emulparams/elf_l1om.sh: Likewise. * emulparams/elf_s390.sh: Likewise. * emulparams/elf_x86_64.sh: Likewise. * emulparams/h8300elf.sh: Likewise. * emulparams/h8300elf_linux.sh: Likewise. * emulparams/hppa64linux.sh: Likewise. * emulparams/hppaelf.sh: Likewise. * emulparams/hppalinux.sh: Likewise. * emulparams/i386lynx.sh: Likewise. * emulparams/i386moss.sh: Likewise. * emulparams/i386nto.sh: Likewise. * emulparams/m32relf.sh: Likewise. * emulparams/m32relf_linux.sh: Likewise. * emulparams/m68hc11elf.sh: Likewise. * emulparams/m68hc11elfb.sh: Likewise. * emulparams/m68hc12elf.sh: Likewise. * emulparams/m68hc12elfb.sh: Likewise. * emulparams/m68kelf.sh: Likewise. * emulparams/mn10300.sh: Likewise. * emulparams/nds32elf.sh: Likewise. * emulparams/nds32elf16m.sh: Likewise. * emulparams/nds32elf_linux.sh: Likewise. * emulparams/nios2elf.sh: Likewise. * emulparams/nios2linux.sh: Likewise. * emulparams/pruelf.sh: Likewise. * emulparams/score3_elf.sh: Likewise. * emulparams/shelf.sh: Likewise. * emulparams/shelf_nto.sh: Likewise. * emulparams/shelf_vxworks.sh: Likewise. * emulparams/shlelf_linux.sh: Likewise. * emulparams/shlelf_nto.sh: Likewise. * emulparams/v850.sh: Likewise. * emulparams/v850_rh850.sh: Likewise. * ldelf.c: Update comment. * ldelf.h: Likewise. * emultempl/aarch64elf.em: Likewise. * emultempl/alphaelf.em: Likewise. * emultempl/arclinux.em: Likewise. * emultempl/armelf.em: Likewise. * emultempl/avrelf.em: Likewise. * emultempl/bfin.em: Likewise. * emultempl/cr16elf.em: Likewise. * emultempl/crxelf.em: Likewise. * emultempl/cskyelf.em: Likewise. * emultempl/elf-generic.em: Likewise. * emultempl/elf-x86.em: Likewise. * emultempl/epiphanyelf_4x4.em: Likewise. * emultempl/hppaelf.em: Likewise. * emultempl/ia64elf.em: Likewise. * emultempl/m68hc1xelf.em: Likewise. * emultempl/m68kelf.em: Likewise. * emultempl/metagelf.em: Likewise. * emultempl/mmix-elfnmmo.em: Likewise. * emultempl/mmixelf.em: Likewise. * emultempl/mmo.em: Likewise. * emultempl/needrelax.em: Likewise. * emultempl/nios2elf.em: Likewise. * emultempl/ppc32elf.em: Likewise. * emultempl/ppc64elf.em: Likewise. * emultempl/pruelf.em: Likewise. * emultempl/rxelf.em: Likewise. * emultempl/scoreelf.em: Likewise. * emultempl/spuelf.em: Likewise. * emultempl/tic6xdsbt.em: Likewise. * emultempl/v850elf.em: Likewise. * emultempl/vms.em: Likewise. * emultempl/vxworks.em: Likewise. * emultempl/xtensaelf.em: Likewise. * scripttempl/arclinux.sc: Likewise. * scripttempl/armbpabi.sc: Likewise. * scripttempl/elf.sc: Likewise. * scripttempl/elf64bpf.sc: Likewise. * scripttempl/elf64hppa.sc: Likewise. * scripttempl/elf_chaos.sc: Likewise. * scripttempl/elfarc.sc: Likewise. * scripttempl/elfarcv2.sc: Likewise. * scripttempl/elfd10v.sc: Likewise. * scripttempl/elfm68hc11.sc: Likewise. * scripttempl/elfm68hc12.sc: Likewise. * scripttempl/elfm9s12z.sc: Likewise. * scripttempl/elfxgate.sc: Likewise. * scripttempl/elfxtensa.sc: Likewise. * scripttempl/epiphany_4x4.sc: Likewise. * scripttempl/iq2000.sc: Likewise. * scripttempl/mep.sc: Likewise. * scripttempl/nds32elf.sc: Likewise. * scripttempl/v850.sc: Likewise. * scripttempl/v850_rh850.sc: Likewise. * scripttempl/xstormy16.sc: Likewise. * testsuite/ld-arm/arm-dyn.ld: Likewise. * testsuite/ld-arm/arm-lib.ld: Likewise. * testsuite/ld-arm/arm-no-rel-plt.ld: Likewise. * testsuite/ld-arm/fdpic-main.ld: Likewise. * testsuite/ld-arm/fdpic-shared.ld: Likewise. * testsuite/ld-elf/elf.exp: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elfvsb/elf-offset.ld: Likewise. * testsuite/ld-mips-elf/mips-dyn.ld: Likewise. * testsuite/ld-mips-elf/mips-lib.ld: Likewise. * testsuite/ld-scripts/dynamic-sections.t: Likewise. * testsuite/ld-shared/elf-offset.ld: Likewise. * configure: Regenerate.
2019-09-11Move elf32.em and elf-generic.em functionsAlan Modra1-0/+92
Many ELF linker targets support multiple "emulations" and thus have multiple copies of elf32.em being compiled and linked into ld. This patch moves much of elf32.em and elf-generic.em into files which will be compiled just once, resulting in a 20% decrease in ld size for --enable-targets=all. * Makefile.am (ALL_EMUL_EXTRA_OFILES): Add ldelf and ldelfgen. (CFILES, HFILES, EXTRA_ld_new_SOURCES): Likewise. * configure.tgt: Formatting. (targ_extra_ofiles): Init to ldelf.o ldelfgen.o, reset to just ldelfgen.o for generic ELF targets, and empty for non-ELF. * emultempl/aarch64elf.em (gldaarch64_layout_sections_again): Use ldelf_map_segments. (gld${EMULATION_NAME}_after_allocation): Likewise. (real_func, aarch64_for_each_input_file_wrapper), (aarch64_lang_for_each_input_file): Delete. (lang_for_each_input_file): Don't define. * emultempl/alphaelf.em (alpha_after_parse): Use ldelf_map_segments. * emultempl/armelf.em (gldarm_layout_sections_again): Likewise. (gld${EMULATION_NAME}_after_allocation): Likewise. (real_func, arm_for_each_input_file_wrapper), (arm_lang_for_each_input_file): Delete. (lang_for_each_input_file): Don't define. * emultempl/cr16elf.em (cr16elf_after_parse): Use ldelf_map_segments. * emultempl/crxelf.em (crxelf_after_parse): Likewise. Delete declaration. * emultempl/cskyelf.em (gldcsky_layout_sections_again): Use ldelf_map_segments. (gld${EMULATION_NAME}_after_allocation): Likewise. (real_func, csky_for_each_input_file_wrapper), (csky_lang_for_each_input_file): Delete. (lang_for_each_input_file): Don't define. * emultempl/genelf.em: Include ldelfgen.h. (gld${EMULATION_NAME}_before_allocation): Use ldelf_map_segments. * emultempl/hppaelf.em (hppaelf_after_parse): Likewise. (hppaelf_layout_sections_again): Likewise. (gld${EMULATION_NAME}_after_allocation): Likewise. (real_func, hppa_for_each_input_file_wrapper), (hppa_lang_for_each_input_file): Delete. (lang_for_each_input_file): Don't define. * emultempl/ia64elf.em (ia64elf_after_parse): Use ldelf_map_segments. * emultempl/m68hc1xelf.em (real_func), (m68hc11_for_each_input_file_wrapper), (m68hc11_lang_for_each_input_file): Delete. (lang_for_each_input_file): Don't define. * emultempl/metagelf.em (metagelf_layout_sections_again): Use ldelf_map_segments. (gld${EMULATION_NAME}_after_allocation): Likewise. (real_func, metag_for_each_input_file_wrapper), (metag_lang_for_each_input_file): Delete. (lang_for_each_input_file): Don't define. * emultempl/mipself.em (real_func), (mips_for_each_input_file_wrapper), (mips_lang_for_each_input_file): Delete. (lang_for_each_input_file): Don't define. * emultempl/mmo.em: Don't include elf-bfd.h, do include ldelfgen.h. (gld${EMULATION_NAME}_after_allocation): Use ldelf_map_segments. * emultempl/nds32elf.em (nds32_elf_after_parse): Use ldelf_after_parse. (nds32_elf_after_allocation): Comment fix. * emultempl/nios2elf.em (nios2elf_layout_sections_again): Use ldelf_map_segments. (gld${EMULATION_NAME}_after_allocation): Likewise. (real_func, nios2_for_each_input_file_wrapper), (nios2_lang_for_each_input_file): Delete. (lang_for_each_input_file): Don't define. * emultempl/ppc32elf.em (gld${EMULATION_NAME}_load_symbols): Delete declaration. (ppc_recognized_file): Call ldelf_load_symbols. * emultempl/ppc64elf.em (ppc_layout_sections_again): Likewise. (gld${EMULATION_NAME}_after_allocation): Likewise. (real_func, ppc_for_each_input_file_wrapper), (ppc_lang_for_each_input_file): Delete. (lang_for_each_input_file): Don't define. (gld${EMULATION_NAME}_load_symbols): Don't declare. (ppc64_recognized_file): Call ldelf_load_symbols. * emultempl/riscvelf.em (gld${EMULATION_NAME}_after_allocation): Use ldelf_map_segments. * emultempl/spuelf.em (spu_place_special_section): Use ldelf_place_orphan. * emultempl/tic6xdsbt.em (gld${EMULATION_NAME}_after_allocation): Use ldelf_map_segments. * emultempl/vms.em: Include ldelfgen.h. (gld${EMULATION_NAME}_after_allocation): Use ldelf_map_segments. * emultempl/elf32.em: Remove unnecessary headers, include ldelf.h and ldelfgen.h. Move much of file content to.. * ldelf.c: ..here. New file. * ldelf.h: New file. * emultempl/elf-generic.em: Move gld${EMULATION_NAME}_map_segments.. * ldelfgen.c: ..to here. * ldelfgen.h: New file. * ldlang.c (lang_for_each_input_file): Adjust to only call func on real files. (lang_for_each_file): Likewise. * po/SRC-POTFILES.in: Regenerate. * Makefile.in: Regenerate.
2019-09-11Tidy ld/ldmisc.cAlan Modra1-0/+5
The idea here is to not use elf-bfd.h and coff-bfd.h in generic linker code. bfd/ * targets.c (struct bfd_target): Add _bfd_group_name. (BFD_JUMP_TABLE): Likewise. * coffgen.c (bfd_coff_group_name): New function. * elf.c (bfd_elf_group_name): New function. * linker.c (_bfd_nolink_bfd_group_name): New function. * section.c (bfd_generic_group_name): New function. * elf-bfd.h (bfd_elf_group_name): Declare. * libbfd-in.h (_bfd_nolink_bfd_group_name): Declare. * libcoff-in.h (bfd_coff_group_name): Declare. * aout-target.h (MY_bfd_group_name): Define. * aout-tic30.c (MY_bfd_group_name): Define. * bfd.c (bfd_group_name): Define. * binary.c (binary_bfd_group_name): Define. * coff-alpha.c (_bfd_ecoff_bfd_group_name): Define. * coff-mips.c (_bfd_ecoff_bfd_group_name): Define. * coff-rs6000.c (_bfd_xcoff_bfd_group_name): Define. * coffcode.h (coff_bfd_group_name): Define. * elfxx-target.h (bfd_elfNN_bfd_group_name): Define. * i386msdos.c (msdos_bfd_group_name): Define. * ihex.c (ihex_bfd_group_name): Define. * mach-o-target.c (bfd_mach_o_bfd_group_name): Define. * mmo.c (mmo_bfd_group_name): Define. * pef.c (bfd_pef_bfd_group_name): Define. * plugin.c (bfd_plugin_bfd_group_name): Define. * ppcboot.c (ppcboot_bfd_group_name): Define. * som.c (som_bfd_group_name): Define. * srec.c (srec_bfd_group_name): Define. * tekhex.c (tekhex_bfd_group_name): Define. * verilog.c (verilog_bfd_group_name): Define. * vms-alpha.c (vms_bfd_group_name, alpha_vms_bfd_group_name): Define. * xsym.c (bfd_sym_bfd_group_name): Define. * coff64-rs6000.c (rs6000_xcoff64_vec): Init new field. (rs6000_xcoff64_aix_vec): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * libcoff.h: Regenerate. ld/ * ldmisc.c: Don't #include elf-bfd.h or coff-bfd.h. (vfinfo): Use bfd_group_name.
2019-09-11Tidy ld/plugin.cAlan Modra1-0/+6
* plugin.c (asymbol_from_plugin_symbol): Move code handling ELF common symbols to block handling ELF visibility. Simplify visibility setting.
2019-09-09i386: Adjust for new output format from readelfH.J. Lu1-0/+31
PR binutils/24887 * testsuite/ld-i386/property-1.r: Adjust for new output format from readelf. * testsuite/ld-i386/property-1a.r: Likewise. * testsuite/ld-i386/property-2.r: Likewise. * testsuite/ld-i386/property-2a.r: Likewise. * testsuite/ld-i386/property-3.r: Likewise. * testsuite/ld-i386/property-3a.r: Likewise. * testsuite/ld-i386/property-4.r: Likewise. * testsuite/ld-i386/property-4a.r: Likewise. * testsuite/ld-i386/property-5.r: Likewise. * testsuite/ld-i386/property-5a.r: Likewise. * testsuite/ld-i386/property-6.r: Likewise. * testsuite/ld-i386/property-7.r: Likewise. * testsuite/ld-i386/property-7a.r: Likewise. * testsuite/ld-i386/property-1.r: Likewise. * testsuite/ld-i386/property-1a.r: Likewise. * testsuite/ld-i386/property-2.r: Likewise. * testsuite/ld-i386/property-2a.r: Likewise. * testsuite/ld-i386/property-3.r: Likewise. * testsuite/ld-i386/property-3a.r: Likewise. * testsuite/ld-i386/property-4.r: Likewise. * testsuite/ld-i386/property-4a.r: Likewise. * testsuite/ld-i386/property-5.r: Likewise. * testsuite/ld-i386/property-5a.r: Likewise. * testsuite/ld-i386/property-6.r: Likewise. * testsuite/ld-i386/property-7.r: Likewise. * testsuite/ld-i386/property-7a.r: Likewise.
2019-09-09Add markers for 2.33 branch to NEWS and ChangeLog files.Phil Blundell1-0/+4
2019-09-06beos.em qsort predicate tidyAlan Modra1-0/+6
lang_input_section_type** is better than lang_statement_union_type** here since that is in fact the type passed to the qsort predicate, and I think it's worth factoring out the common indirections. * emultempl/beos.em (sort_by_file_name): Use appropriate intermediary variables. (sort_by_section_name): Likewise.
2019-09-06bfd_get_filenameAlan Modra1-0/+7
This macro says: /* Cast from const char * to char * so that caller can assign to a char * without a warning. */ I reckon that isn't such a good idea since it can result in char* variables where const char* is appropriate. Not very many places need the char* cast. bfd/ * aout-target.h (object_p): Formatting. * bfd-in.h (bfd_get_filename): Don't cast to char*. * corefile.c (generic_core_file_matches_executable_p): Constify variables and remove cast. * bfd-in2.h: Regenerate. binutils/ * nm.c (print_object_filename_bsd, print_object_filename_sysv), (print_object_filename_posix, print_archive_filename_bsd), (print_archive_filename_sysv, print_archive_filename_posix), (print_archive_member_bsd, print_archive_member_sysv), (print_archive_member_posix): Constify parameter. (struct output_fns <print_object_filename, print_archive_filename>), (<print_archive_member>): Likewise. * objcopy.c (copy_archive): Add cast for make_tempdir. ld/ * emultempl/elf32.em (gld${EMULATION_NAME}_search_needed): Constify variable. * emultempl/pe.em (gld_${EMULATION_NAME}_after_open): Likewise. * emultempl/pep.em (gld_${EMULATION_NAME}_after_open): Likewise. gdb/ * coffread.c (coff_symfile_read): Constify filename variable. * dbxread.c (dbx_symfile_init, coffstab_build_psymtabs), (elfstab_build_psymtabs, stabsect_build_psymtabs): Likewise. * gdb_bfd.c (gdb_bfd_close_or_warn): Likewise. * solib.c (reload_shared_libraries_1): Likewise. * symfile.c (reread_symbols): Likewise. * solib-aix.c (solib_aix_bfd_open): Add cast for xfree of filename. * solib-darwin.c (darwin_bfd_open): Likewise. * symfile-mem.c (symbol_file_add_from_memory): Likewise. sim/cris/ * sim-if.c (sim_open): Constify filename variable.
2019-09-05Fix PR ld/24574Eric Botcazou1-0/+6
This restores a line that has been dropped when the auto-import feature of the PE-COFF linker was overhauled about one year. It is necessary for GDB to properly resolve extern symbol in DLLs. ld/ChangeLog * pe-dll.c (pe_find_data_imports): Replace again the original name of the undefined symbol with the __imp_ prefixed one after it is resolved.
2019-09-05R_PPC64_PCREL_OPTAlan Modra1-0/+6
The loads and stores handled in the second instruction of a sequence marked by R_PPC64_PCREL_OPT may be a prefix instruction. For example: pld ra,symbol@got@pcrel 0: pld rt,off(ra) .reloc 0b-8,R_PPC64_PCREL_OPT,(.-8)-(0b-8) can be optimised to pld rt,symbol+off@pcrel pnop * elf64-ppc.c (xlate_pcrel_opt): Handle prefix loads and stores in second instruction. (ppc64_elf_relocate_section): Likewise.
2019-08-29Segfault in ld building SPEC CPU2017 527.cam4_r with -fltoAlan Modra1-0/+6
Caused by the PR24406 fix. unwrap_hash_lookup shouldn't be called with link_info.wrap_hash NULL. PR ld/24406 * plugin.c (get_symbols): Test link_info.wrap_hash before calling unwrap_hash_lookup.
2019-08-22AArch64: Fix LD crash on weak and undefined TLS symbols. (PR/24602).Tamar Christina1-0/+9
This patch fixes a few linker crashes due to TLS code reaching an assert when it shouldn't. The first scenario is with weak TLS symbols that remain weak during linking. In this case the mid-end would not have seen a TLS symbol and so wouldn't have allocated the TLS section. We currently assert here and the linker crashes with a not very useful message. This patch changes this to return the value 0 for the TLS symbol in question emulating what lld and gold and other BFD targets do. However because weak TLS is implementation defined and we don't define any behavior for it I also emit a warning to the user to inform them of such. Secondly when a strong TLS reference is undefined. The linker crashes even after it correctly reported that there is an undefined reference. This changes it so that it gracefully exits and reports a useful error. bfd/ChangeLog: PR ld/24601 * elfnn-aarch64.c (aarch64_relocate): Handle weak TLS and undefined TLS. Also Pass input_bfd to _bfd_aarch64_elf_resolve_relocation. * elfxx-aarch64.c (_bfd_aarch64_elf_resolve_relocation): Use it. * elfxx-aarch64.h (_bfd_aarch64_elf_resolve_relocation): Emit warning for weak TLS. ld/ChangeLog: PR ld/24601 * testsuite/ld-aarch64/aarch64-elf.exp (undef-tls, weak-tls): New. * testsuite/ld-aarch64/undef-tls.d: New test. * testsuite/ld-aarch64/undef-tls.s: New test. * testsuite/ld-aarch64/weak-tls.d: New test. * testsuite/ld-aarch64/weak-tls.s: New test.
2019-08-20Arm: Fix performance issue with thumb-2 tailcallsTamar Christina1-0/+26
We currently use a padding NOP after a Thumb to Arm interworking veneer (BX pc). The NOP is never executed but may result in a performance penalty on some cores. For this reason this patch changes the NOPs after Thumb to Arm veneers into B .-2 and adds a note to this in the source code for future reference. bfd/ChangeLog: * elf32-arm.c (elf32_thumb2_plt_entry, elf32_arm_plt_thumb_stub, elf32_arm_stub_long_branch_v4t_thumb_thumb, elf32_arm_stub_long_branch_v4t_thumb_arm, elf32_arm_stub_short_branch_v4t_thumb_arm, elf32_arm_stub_long_branch_v4t_thumb_arm_pic, elf32_arm_stub_long_branch_v4t_thumb_thumb_pic, elf32_arm_stub_long_branch_v4t_thumb_tls_pic): Change nop to branch to previous instruction. ld/ChangeLog: * testsuite/ld-arm/cortex-a8-fix-b-plt.d: Update Testcase. * testsuite/ld-arm/cortex-a8-fix-b-rel-arm.d: Likewise. * testsuite/ld-arm/cortex-a8-fix-bcc-plt.d: Likewise. * testsuite/ld-arm/farcall-cond-thumb-arm.d: Likewise. * testsuite/ld-arm/farcall-mixed-app.d: Likewise. * testsuite/ld-arm/farcall-mixed-app2.d: Likewise. * testsuite/ld-arm/farcall-mixed-lib-v4t.d: Likewise. * testsuite/ld-arm/farcall-thumb-arm-pic-veneer.d: Likewise. * testsuite/ld-arm/farcall-thumb-arm-short.d: Likewise. * testsuite/ld-arm/farcall-thumb-arm.d: Likewise. * testsuite/ld-arm/farcall-thumb-thumb-pic-veneer.d: Likewise. * testsuite/ld-arm/farcall-thumb-thumb.d: Likewise. * testsuite/ld-arm/fix-arm1176-on.d: Likewise. * testsuite/ld-arm/ifunc-10.dd: Likewise. * testsuite/ld-arm/ifunc-2.dd: Likewise. * testsuite/ld-arm/ifunc-4.dd: Likewise. * testsuite/ld-arm/ifunc-6.dd: Likewise. * testsuite/ld-arm/ifunc-8.dd: Likewise. * testsuite/ld-arm/jump-reloc-veneers-long.d: Likewise. * testsuite/ld-arm/mixed-app.d: Likewise. * testsuite/ld-arm/thumb2-b-interwork.d: Likewise. * testsuite/ld-arm/tls-longplt.d: Likewise. * testsuite/ld-arm/tls-thumb1.d: Likewise.
2019-08-16x86-64: Move PIC check for PC-relative relocations backH.J. Lu1-0/+9
commit 83924b3846361f2f76f9a6e7b5afa01c0eebbd4f Author: H.J. Lu <hjl.tools@gmail.com> Date: Tue Feb 5 18:45:23 2019 -0800 x86-64: Restore PIC check for PCREL reloc against protected symbol moved PIC check for PC-relative relocations to elf_x86_64_check_relocs. Since linker defined symbols may not be processed at the time, we need to move the check back to elf_x86_64_relocate_section. bfd/ PR ld/24905 * elf64-x86-64.c (elf_x86_64_check_relocs): Move PIC check for PC-relative relocations back to ... (elf_x86_64_relocate_section): Here. ld/ PR ld/24905 * testsuite/ld-x86-64/pr24905-x32.d: New file. * testsuite/ld-x86-64/pr24905.d: Likewise. * testsuite/ld-x86-64/pr24905.s: Likewise. * testsuite/ld-x86-64/pr24905.t: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run pr24905 and pr24905-x32.
2019-08-16[ld] [arm] Add support for noinit sectionChristophe Lyon1-0/+5
2019-08-16 Christophe Lyon <christophe.lyon@linaro.org> * emulparams/armelf.sh (OTHER_SECTIONS): Add support for noinit section. Change-Id: Ib293f28cc5f21e9e9a13abf4d4e37f0a0eec41c0
2019-08-16PowerPC gcc bootstrap fail with bss-pltAlan Modra1-0/+6
git commit 3e04d7655b introduced a bug by sizing output sections earlier in ppc_before_allocation. That meant PLT (and GOT) sizes were not included when calculating total executable section sizes. * emultempl/ppc32elf.em (ppc_before_allocation): Force running prelim_size_sections before deciding whether branch trampolines might be needed.
2019-08-15RISC-V: Fix lui relaxation issue with code at address 0.Jim Wilson1-0/+7
This fixes a problem originally reported at https://github.com/riscv/riscv-binutils-gdb/issues/173 If you have code linked at address zero, you can have a lui instruction loading a value 0x800 which gets relaxed to a c.lui which is valid (c.lui 0x1 followed by addi -0x800). Relaxation can reduce the value below 0x800 at which point the c.lui 0x0 is no longer valid. We can fix this by converting the c.lui to a c.li which can load 0. bfd/ * elfnn-riscv.c (perform_relocation) <R_RISCV_RVC_LUI>: If RISCV_CONST_HIGH_PART (value) is zero, then convert c.lui instruction to c.li instruction, and use ENCODE_RVC_IMM to set value. ld/ * testsuite/ld-riscv-elf/c-lui-2.d: New. * testsuite/ld-riscv-elf/c-lui-2.ld: New. * testsuite/ld-riscv-elf/c-lui-2.s: New. * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run the c-lui-2 test.
2019-08-10Sort statement_enum and lang_statement_unionAlan Modra1-0/+5
To make comparing the two easier. * ldlang.h (enum statement_enum): Sort. (union lang_statement_union): Sort.
2019-08-10Delete unused ldlang.h structsAlan Modra1-0/+7
* ldlang.h (lang_common_statement_type): Delete. (lang_object_symbols_statement_type): Delete. (union lang_statement_union): Remove common_statement and object_symbols_statement.
2019-08-10stat_alloc castsAlan Modra1-0/+11
Casts from a void* just clutter the source. * ldexp.c (exp_intop, exp_bigintop, exp_relop, exp_binop, exp_trinop), (exp_unop, exp_nameop, exp_assop, exp_assert): Remove casts of stat_alloc return value. * ldlang.c (new_statement, new_afile, sort_def_symbol), (lang_memory_region_lookup, lang_memory_region_alias), (ldlang_add_undef, ldlang_add_require_defined, insert_pad), (lang_add_gc_name, lang_new_phdr): Likewise. * lexsup.c (set_segment_start): Likewise.
2019-08-10lang_input_statement_type next pointersAlan Modra1-0/+18
"next" and "next_real_file" in lang_input_statement_type always point to another lang_input_statement_type, so it makes sense for these to not be the generic lang_statement_union_type. This patch also updates a number of variables in ldlang.c for the same reason, and modifies lang_statement_append to reduce the need for casts. * ldlang.h (lang_input_statement_type): Make next and next_real_file a lang_input_statement_type pointer. (lang_statement_append): Delete prototype. (LANG_FOR_EACH_INPUT_STATEMENT): Update for lang_input_statement_type change. * ldmain.c (add_archive_element): Likewise. * ldlang.c: Likewise throughout. (lang_statement_append): Make static. Make element and field void pointers. Remove casts in calls. (lang_check): Use a lang_input_statement_type pointer for "file". (find_rescan_insertion): Similarly for "iter" and return value. (lang_process): Similarly for "insert", "iter" and "temp". * emultempl/spuelf.em (embedded_spu_file): Likewise. * emultempl/aix.em (gld${EMULATION_NAME}_before_allocation): Expand lang_statment_append call.
2019-08-09Add support for a MIPS specific .MIPS.xhash section.Mihailo Stojanovic1-0/+16
This patch is a reimplementation of [1] which was submitted in 2015 by Neil Schellenberger. Copyright issue was sorted out [2] last year. It proposed a new section (.gnu.xhash) and related dynamic tag (DT_GNU_XHASH). The new section would be virtually identical to the existing .gnu.hash except for the translation table (xlat) which would contain correct MIPS .dynsym indexes corresponding to the hashvals in chains. This is because MIPS ABI imposes a different ordering on the dynsyms than the one expected by the .gnu.hash section. Another addition would be a leading word (ngnusyms) which would contain the number of entries in the translation table. In this patch, the new section name and dynamic tag are changed to reflect the fact that the section should be treated as MIPS-specific (.MIPS.xhash and DT_MIPS_XHASH). This patch addresses the alignment issue as reported in [3], which is caused by the leading word added to the .MIPS.xhash section. Leading word is removed in this patch, and the number of entries in the translation table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is addressed by the corresponding glibc patch). Suggestions on coding style in [4] were taken into account. Existing GNU hash testcase was covered, and another one was added in the MIPS part of the testsuite. The other major change is reserving MIPS ABI version 5 for .MIPS.xhash, marking the need of support for .MIPS.xhash in the dynamic linker (again, addressed in the corresponding glibc patch). This is something which I am not sure of, especially after reading [5]. I am confused on whether this ABI version is reserved for IFUNC, or it can be used for this purpose. Already mentioned glibc patch is submitted at: https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html [1] https://sourceware.org/ml/binutils/2015-10/msg00057.html [2] https://sourceware.org/ml/binutils/2018-03/msg00025.html [3] https://sourceware.org/ml/binutils/2016-01/msg00006.html [4] https://sourceware.org/ml/binutils/2016-02/msg00097.html [5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section. * emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section. * emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section. * emultempl/mipself.em: Remove mips_after_parse function. * testsuite/ld-elf/hash.d: Update comment. * testsuite/ld-mips-elf/hash1.d: New test. * testsuite/ld-mips-elf/hash1.s: Ditto. * testsuite/ld-mips-elf/hash1a.d: Remove. * testsuite/ld-mips-elf/hash1b.d: Ditto. * testsuite/ld-mips-elf/hash1c.d: Ditto * testsuite/ld-mips-elf/hash2.d: New test. * testsuite/ld-mips-elf/mips-elf.exp: New tests. * testsuite/ld-mips-elf/start.s: New test. bfd * elf-bfd.h (struct elf_backend_data): New members. * elflink.c (_bfd_elf_link_create_dynamic_sections): Create .gnu.hash section if necessary. (struct collect_gnu_hash_codes): New member. (elf_gnu_hash_process_symidx): New function name. (elf_renumber_gnu_hash_syms): Ignore local and undefined symbols. Record xlat location for every symbol which should have a .MIPS.xhash entry. (bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to dynamic section if necessary. (GNU_HASH_SECTION_NAME): New define. (bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section. Update the section size info. * elfxx-mips.c (struct mips_elf_hash_sort_data): New members. (struct mips_elf_link_hash_entry): New member. (mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation table location. (mips_elf_sort_hash_table): Initialize the pointer to the .MIPS.xhash section. (mips_elf_sort_hash_table_f): Populate the .MIPS.xhash translation table entry with the symbol dynindx. (_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH. (_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section info. (_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash section. (_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to dynamic section. (_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH. (_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section sh_link info. (_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag. (MIPS_LIBC_ABI_XHASH): New ABI version enum value. (_bfd_mips_post_process_headers): Mark the ABI version as MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section, but not a .hash section. (_bfd_mips_elf_record_xhash_symbol): New function. Record a position in the translation table, associated with the hash entry. * elfxx-mips.h (literal_reloc_p): Define elf_backend_record_xhash_symbol backend hook. * elfxx-target.h: Initialize elf_backend_record_xhash_symbol backend hook. include * elf/mips.h (SHT_GNU_XHASH): New define. (DT_GNU_XHASH): New define. binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type. (get_mips_section_type_name): Return MI{S_XHASH name string. (dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic info. (process_symbol_table): Initialize the .MIPS.xhash section pointer. Adjust the readelf output to support the new section. (process_object): Set the .MIPS.xhash dynamic info to zero.
2019-08-08Change the output of readelf's note display so that the "Data size" column ↵Nick Clifton1-0/+130
header is left justified. PR 24887 binutils* readelf.c (process_notes_at): Left justify the "Data size" column heading. * testsuite/binutils-all/i386/empty.d: Adjust for new output format. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/pr21231a.d: Likewise. * testsuite/binutils-all/i386/pr21231b.d: Likewise. * testsuite/binutils-all/i386/shstk.d: Likewise. * testsuite/binutils-all/note-2-32.d: Likewise. * testsuite/binutils-all/note-2-64.d: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/pr21231a.d: Likewise. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/shstk-x32.d: Likewise. * testsuite/binutils-all/x86-64/shstk.d: Likewise. ld * testsuite/ld-aarch64/bti-plt-2.d: Adjust for new output format from readelf. * testsuite/ld-aarch64/bti-plt-4.d: Likewise. * testsuite/ld-aarch64/bti-plt-6.d: Likewise. * testsuite/ld-aarch64/bti-plt-7.d: Likewise. * testsuite/ld-aarch64/bti-warn.d: Likewise. * testsuite/ld-aarch64/property-bti-pac1.d: Likewise. * testsuite/ld-aarch64/property-bti-pac2.d: Likewise. * testsuite/ld-aarch64/property-bti-pac3.d: Likewise. * testsuite/ld-elf/x86-feature-1a.rd: Likewise. * testsuite/ld-elf/x86-feature-1b.rd: Likewise. * testsuite/ld-elf/x86-feature-1c.rd: Likewise. * testsuite/ld-elf/x86-feature-1d.rd: Likewise. * testsuite/ld-elf/x86-feature-1e.rd: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/pr23372a.d: Likewise. * testsuite/ld-i386/pr23372c.d: Likewise. * testsuite/ld-i386/pr23486a.d: Likewise. * testsuite/ld-i386/pr23486b.d: Likewise. * testsuite/ld-i386/pr23486c.d: Likewise. * testsuite/ld-i386/pr23486d.d: Likewise. * testsuite/ld-i386/pr24322a.d: Likewise. * testsuite/ld-i386/pr24322b.d: Likewise. * testsuite/ld-i386/property-x86-3.d: Likewise. * testsuite/ld-i386/property-x86-4a.d: Likewise. * testsuite/ld-i386/property-x86-5.d: Likewise. * testsuite/ld-i386/property-x86-cet1.d: Likewise. * testsuite/ld-i386/property-x86-cet2a.d: Likewise. * testsuite/ld-i386/property-x86-cet5a.d: Likewise. * testsuite/ld-i386/property-x86-cet5b.d: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-i386/property-x86-shstk1a.d: Likewise. * testsuite/ld-i386/property-x86-shstk1b.d: Likewise. * testsuite/ld-i386/property-x86-shstk2.d: Likewise. * testsuite/ld-i386/property-x86-shstk3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3b.d: Likewise. * testsuite/ld-i386/property-x86-shstk4.d: Likewise. * testsuite/ld-i386/property-x86-shstk5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/pr23372a-x32.d: Likewise. * testsuite/ld-x86-64/pr23372a.d: Likewise. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23486a-x32.d: Likewise. * testsuite/ld-x86-64/pr23486a.d: Likewise. * testsuite/ld-x86-64/pr23486b-x32.d: Likewise. * testsuite/ld-x86-64/pr23486b.d: Likewise. * testsuite/ld-x86-64/pr23486c-x32.d: Likewise. * testsuite/ld-x86-64/pr23486c.d: Likewise. * testsuite/ld-x86-64/pr23486d-x32.d: Likewise. * testsuite/ld-x86-64/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr24322a-x32.d: Likewise. * testsuite/ld-x86-64/pr24322a.d: Likewise. * testsuite/ld-x86-64/pr24322b-x32.d: Likewise. * testsuite/ld-x86-64/pr24322b.d: Likewise. * testsuite/ld-x86-64/pr24458a-x32.d: Likewise. * testsuite/ld-x86-64/pr24458a.d: Likewise. * testsuite/ld-x86-64/pr24458b-x32.d: Likewise. * testsuite/ld-x86-64/pr24458b.d: Likewise. * testsuite/ld-x86-64/pr24458c-x32.d: Likewise. * testsuite/ld-x86-64/pr24458c.d: Likewise. * testsuite/ld-x86-64/property-1.r: Likewise. * testsuite/ld-x86-64/property-1a.r: Likewise. * testsuite/ld-x86-64/property-2.r: Likewise. * testsuite/ld-x86-64/property-2a.r: Likewise. * testsuite/ld-x86-64/property-3.r: Likewise. * testsuite/ld-x86-64/property-3a.r: Likewise. * testsuite/ld-x86-64/property-4.r: Likewise. * testsuite/ld-x86-64/property-4a.r: Likewise. * testsuite/ld-x86-64/property-5.r: Likewise. * testsuite/ld-x86-64/property-5a.r: Likewise. * testsuite/ld-x86-64/property-6.r: Likewise. * testsuite/ld-x86-64/property-7.r: Likewise. * testsuite/ld-x86-64/property-7a.r: Likewise. * testsuite/ld-x86-64/property-x86-3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-3.d: Likewise. * testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-4a.d: Likewise. * testsuite/ld-x86-64/property-x86-5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-5.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5.d: Likewise. gas * testsuite/gas/i386/property-1.d: Adjust for new output format from readelf. * testsuite/gas/i386/property-2.d: Likewise. * testsuite/gas/i386/x86-64-property-1.d: Likewise. * testsuite/gas/i386/x86-64-property-2.d: Likewise.
2019-08-07ld: use a specific linker script in BPF targetsJose E. Marchesi1-0/+13
This patch makes the elf64bpf emulation to use it's own linker script, based on elf.sc. At the moment, the only change is that the BPF executable doesn't define an entry symbol (BPF programs feature several entry points scattered in several sections.) This is a step towards the goal of generating proper ELF executables that would be loaded by the kernel's libbpf. We are not there yet: BPF "programs" should still be linked with -r. This change removes a warning while linking executables, decreases the number of unsupported tests in the target from 47 to 29, and increases the number of expected passes from 104 to 145. Regtested in x86_64 for all targets. No regressions. ld/ChangeLog: 2019-08-07 Jose E. Marchesi <jose.marchesi@oracle.com> * scripttempl/elf64bpf.sc: Adapted from elf.sc. * emulparams/elf64bpf.sh (SCRIPT_NAME): Use elf64bpf. (EMBEDDED): Define. * testsuite/ld-bpf/call-1.d: Do not expect a warning regarding an undefined entry symbol. * testsuite/ld-bpf/jump-1.d: Likewise. * testsuite/ld-undefined/undefined.exp: Do not pass '-e entry' to ld in BPF targets, and do not expect line number information. * testsuite/ld-srec/srec.exp (run_srec_test): xfail s-record tests in BPF targets.
2019-08-06LTO object insertion pointAlan Modra1-0/+9
This is a mostly cosmetic fix for cases like PR24873 where LTO recompiled objects were supposed to be inserted inside a group. The specific case handled by this patch is when the first file inside a group is an archive, the first file claimed by the plugin. Prior to this patch we would have inserted the recompiled objects before the group, which doesn't matter really since the entire group will be reloaded, but it looks a little wrong in map files. PR 24873 * ldlang.c (find_replacements_insert_point): Return "before" flag. (find_next_input_statement): New function. (lang_process): When placing recompiled LTO objects before a claimed archive, place them immediately before in the statement list.
2019-08-06PR24873, gcc -flto objects result in --start-group .. --end-group failure to ↵Alan Modra1-0/+8
include --as-needed libraries Reloading of archives (and checking --as-needed DSOs again) is disabled until we hit the plugin insert point. It's necessary to do that because in a case like lib1.a lto.o lib2.a where lib1.a and lib2.a contain duplicate symbols, we want the lto.o recompiled object to pull in objects from lib2.a as necessary, but not from lib1.a. Unfortunately this heuristic fails when the insert point is inside a group, because ld actually loads the symbols from the recompiled object before running over the contours of the script, thus missing the fact that new undefs appeared in the group. PR 24873 * ldlang.c (plugin_undefs): New static var. (open_input_bfds <lang_group_statement_enum>): Loop on plugin_undefs and hitting plugin_insert point. (lang_process <lto_plugin_active>): Set plugin_undefs.
2019-08-02PowerPC tlsie test fixAlan Modra1-0/+4
* testsuite/ld-powerpc/tlsie.s: Correct medium model ELF sequence.
2019-08-01PR24806, Linking with -T inside --start-group/--end-groupAlan Modra1-0/+9
This patch processes INSERT AFTER and INSERT BEFORE in a user -T script when such a script is invoked on the command line inside --start-group/--end-group. Also, ld now warns when the user simply forgot --end-group. PR 24806 * ldlang.c (process_insert_statements): Add start of list parameter. Use rather than lang_os_list.head. Process insert statements inside group statements with a recursive call. (lang_process): Adjust process_insert_statements call. * lexsup.c (parse_args): Warn when adding missing --end-group.
2019-08-01Rename lang_output_section_statement to lang_os_listAlan Modra1-0/+12
The idea is to make it a little easier to find uses of this list, so searches don't hit occurrences of lang_output_section_statement_type and lang_output_section_statement_enum. * ldlang.h (lang_os_list): Rename from lang_output_section_statement. * ldlang.c: Likewise throughout file. * emultempl/alphaelf.em: Likewise. * emultempl/elf32.em: Likewise. * emultempl/mmo.em: Likewise. * emultempl/pe.em: Likewise. * emultempl/pep.em: Likewise. * emultempl/ppc32elf.em: Likewise. * emultempl/spuelf.em: Likewise.
2019-07-26Ajdust lto-3r and lto-5r tests for powerpc64Alan Modra1-0/+5
* testsuite/ld-plugin/lto-3r.d: Accept D for powerpc64 descriptors. * testsuite/ld-plugin/lto-5r.d: Likewise.
2019-07-24Revert "Remove tests that test __gnu_lto_v1 symbol."H.J. Lu1-0/+7
Revert commit 8c728a9d93e2342c57039fcdd6e4a502875b9e09 Author: Martin Liska <mliska@suse.cz> Date: Mon Jul 22 14:23:32 2019 +0200 Remove tests that test __gnu_lto_v1 symbol. since outputs of these tests are used by later tests. Check the normal symbol, foo, instead of __gnu_lto_v.*, which GCC stopped emitting after r273662. * testsuite/ld-plugin/lto-3r.d: Restored. Check foo instead of __gnu_lto_v.*. * testsuite/ld-plugin/lto-5r.d: Likewise. * testsuite/ld-plugin/lto.exp: Run lto-3r and lto-5r tests.
2019-07-24[ARC] Add linker relaxation.Claudiu Zissulescu1-0/+5
Add linker relaxation. The first relaxation added is converting GOTPC32 to PCREL relocations. This relaxation doesn't change the size of the binary. bfd/ xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com> * elf32-arc.c (bfd_get_32_me): New function. (bfd_put_32_me): Likewise. (arc_elf_relax_section): Likewise. (bfd_elf32_bfd_relax_section): Define. ld/testsuite/ xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com> * ld-arc/relax-local-pic.d: New test. * ld-arc/relax-local-pic.s: New file.
2019-07-23Add missing ChangeLog entries forH.J. Lu1-0/+7
commit 8c728a9d93e2342c57039fcdd6e4a502875b9e09 Author: Martin Liska <mliska@suse.cz> Date: Mon Jul 22 14:23:32 2019 +0200 Remove tests that test __gnu_lto_v1 symbol.
2019-07-23SHF_GNU_MBIND requires ELFOSABI_GNUAlan Modra1-0/+5
When SHF_GNU_MBIND was added in the SHF_LOOS to SHF_HIOS range, it should have required ELFOSABI_GNU since these flags are already in use by other OSes. HPUX SHF_HP_TLS in fact has the same value. That means no place in binutils should test SHF_GNU_MBIND without first checking OSABI, and SHF_GNU_MBIND should not be set without also setting OSABI. At least, that's the ideal, but the patch accepts SHF_GNU_MBIND on ELFOSABI_NONE object files since gas didn't always set OSABI. However, to reinforce the fact that SHF_GNU_MBIND isn't proper without a non-zero OSABI, readelf will display the flag as LOOS+0 if OSABI isn't set. The clash with SHF_HP_TLS means that hppa64-linux either has that flag on .tbss sections or supports GNU_MBIND, not both. (hppa64-linux users, if there are any, may have noticed that GNU ld since 2017 mysteriously aligned their .tbss sections to a 4k boundary. That was one consequence of SHF_HP_TLS being blindly interpreted as SHF_GNU_MBIND.) Since it seems that binutils, gdb, gcc, glibc, and the linux kernel don't care about SHF_HP_TLS I took that flag out of .tbss for hppa64-linux. bfd/ * elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_mbind. * elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_mbind. (get_program_header_size): Formatting. Only test SH_GNU_MBIND when elf_gnu_osabi_mbind is set. (_bfd_elf_map_sections_to_segments): Likewise. (_bfd_elf_init_private_section_data): Likewise. (_bfd_elf_final_write_processing): Update comment. * elf64-hppa.c (elf64_hppa_special_sections): Move .tbss entry. (elf_backend_special_sections): Define without .tbss for linux. binutils/ * readelf.c (get_parisc_segment_type): Split off hpux entries.. (get_ia64_segment_type): ..and these.. (get_hpux_segment_type): ..to here. (get_segment_type): Condition GNU_MBIND on osabi. Use get_hpux_segment_type. (get_symbol_binding): Do not print UNIQUE for ELFOSABI_NONE. (get_symbol_type): Do not print IFUNC for ELFOSABI_NONE. gas/ * config/obj-elf.c (obj_elf_change_section): Don't emit a fatal error for non-SHF_ALLOC SHF_GNU_MBIND here. (obj_elf_parse_section_letters): Return SHF_GNU_MBIND in new gnu_attr param. (obj_elf_section): Adjust obj_elf_parse_section_letters call. Formatting. Set SHF_GNU_MBIND and elf_osabi from gnu_attr. Emit normal error for non-SHF_ALLOC SHF_GNU_MBIND and wrong osabi. (obj_elf_type): Set elf_osabi for ifunc. * testsuite/gas/elf/section12a.d: xfail msp430 and hpux. * testsuite/gas/elf/section12b.d: Likewise. * testsuite/gas/elf/section13.d: Likewise. * testsuite/gas/elf/section13.l: Adjust expected error. ld/ * emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Condition SHF_GNU_MBIND on osabi. Set output elf_gnu_osabi_mbind.
2019-07-23Move ld-scripts size testsAlan Modra1-0/+16
Also restore them somewhat closer to the original. They originally failed on many targets, and a month later I "simplified" them as part of a larger patch fixing other failing tests. That unfortunately lost their main purpose, which was to test TLS layout. * testsuite/ld-elf/size-1.d, * testsuite/ld-elf/size-1.s, * testsuite/ld-elf/size-1.t: New test. * testsuite/ld-elf/size-2.d, * testsuite/ld-elf/size-2.s, * testsuite/ld-elf/size-2.t: New test. * testsuite/ld-scripts/size-1.d, * testsuite/ld-scripts/size-1.s, * testsuite/ld-scripts/size-1.t, * testsuite/ld-scripts/size-2.s, * testsuite/ld-scripts/size-2.d, * testsuite/ld-scripts/size-2.t, * testsuite/ld-scripts/size.exp: Delete.
2019-07-22Fixes the linker testcase "Secure gateway veneers:cmse functions debug ↵Srinath Parvathaneni1-0/+5
information missing" which was failing due to output regular expression mismatch on arm-none-linux-gnueabihf targets. * ld/testsuite/ld-arm/cmse_main_sec_debug.d: Modify regexps to allow for output from a arm-none-linux-gnueabihf target.
2019-07-20PR24827, Linker loops forever if unterminated multi-line comment in scriptAlan Modra1-0/+5
YY_INPUT returns 0 on end of input, not EOF. PR 24827 * ldlex.l (comment): Check for 0 return from input(), not EOF.
2019-07-19[PowerPC64] pc-relative TLS relocationsAlan Modra1-0/+10
This patch supports using pcrel instructions in TLS code sequences. A number of new relocations are needed, gas operand modifiers to generate those relocations, and new TLS optimisation. For optimisation it turns out that the new pcrel GD and LD sequences can be distinguished from the non-pcrel GD and LD sequences by there being different relocations on the new sequence. The final "add ra,rb,13" on IE sequences similarly needs a new relocation, or as I chose, a modification of R_PPC64_TLS. On pcrel IE code, the R_PPC64_TLS points one byte into the "add" instruction rather than being on the instruction boundary. GD: pla 3,z@got@tlsgd@pcrel # R_PPC64_GOT_TLSGD34 bl __tls_get_addr@notoc(z@tlsgd) # R_PPC64_TLSGD and R_PPC64_REL24_NOTOC edited to IE pld 3,z@got@tprel@pcrel add 3,3,13 edited to LE paddi 3,13,z@tprel nop LD: pla 3,z@got@tlsld@pcrel # R_PPC64_GOT_TLSLD34 bl __tls_get_addr@notoc(z@tlsld) # R_PPC64_TLSLD and R_PPC64_REL24_NOTOC .. paddi 9,3,z2@dtprel pld 10,z3@got@dtprel@pcrel add 10,10,3 edited to LE paddi 3,13,0x1000 nop IE: pld 9,z@got@tprel@pcrel # R_PPC64_GOT_TPREL34 add 3,9,z@tls@pcrel # R_PPC64_TLS at insn+1 ldx 4,9,z@tls@pcrel lwax 5,9,z@tls@pcrel stdx 5,9,z@tls@pcrel edited to LE paddi 9,13,z@tprel nop ld 4,0(9) lwa 5,0(9) std 5,0(9) LE: paddi 10,13,z@tprel include/ * elf/ppc64.h (R_PPC64_TPREL34, R_PPC64_DTPREL34), (R_PPC64_GOT_TLSGD34, R_PPC64_GOT_TLSLD34), (R_PPC64_GOT_TPREL34, R_PPC64_GOT_DTPREL34): Define. (IS_PPC64_TLS_RELOC): Include new tls relocs. bfd/ * reloc.c (BFD_RELOC_PPC64_TPREL34, BFD_RELOC_PPC64_DTPREL34), (BFD_RELOC_PPC64_GOT_TLSGD34, BFD_RELOC_PPC64_GOT_TLSLD34), (BFD_RELOC_PPC64_GOT_TPREL34, BFD_RELOC_PPC64_GOT_DTPREL34), (BFD_RELOC_PPC64_TLS_PCREL): New pcrel tls relocs. * elf64-ppc.c (ppc64_elf_howto_raw): Add howtos for pcrel tls relocs. (ppc64_elf_reloc_type_lookup): Translate pcrel tls relocs. (must_be_dyn_reloc, dec_dynrel_count): Add R_PPC64_TPREL64. (ppc64_elf_check_relocs): Support pcrel tls relocs. (ppc64_elf_tls_optimize, ppc64_elf_relocate_section): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Map "tls@pcrel", "got@tlsgd@pcrel", "got@tlsld@pcrel", "got@tprel@pcrel", and "got@dtprel@pcrel". (fixup_size, md_assemble): Handle pcrel tls relocs. (ppc_force_relocation, ppc_fix_adjustable): Likewise. (md_apply_fix, tc_gen_reloc): Likewise. ld/ * testsuite/ld-powerpc/tlsgd.d, * testsuite/ld-powerpc/tlsgd.s, * testsuite/ld-powerpc/tlsie.d, * testsuite/ld-powerpc/tlsie.s, * testsuite/ld-powerpc/tlsld.d, * testsuite/ld-powerpc/tlsld.s: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.
2019-07-19[PowerPC] Rename testcaseAlan Modra1-0/+8
Just making room for a new tlsld test. * testsuite/ld-powerpc/tlsldopt.d: Rename from tlsld.d. * testsuite/ld-powerpc/tlsldopt.s: Rename from tlsld.s. * testsuite/ld-powerpc/tlsldopt32.d: Rename from tlsld32.d. * testsuite/ld-powerpc/tlsldopt32.s: Rename from tlsld32.s. * testsuite/ld-powerpc/powerpc.exp: Update.
2019-07-19Re: ld -r: Don't merge with member of output section groupAlan Modra1-0/+5
PR 24819 * testsuite/ld-elf/pr24819.d: xfail for genelf targets.
2019-07-18ld -r: Don't merge with member of output section groupH.J. Lu1-0/+8
When doing a relocatable link, members of input section group are placed in their own output sections. We need to make sure that no input sections are merged with member of output section group. PR ld/24819 * emultempl/elf32.em (elf_orphan_compatible): Return FALSE for member of output section group when doing a relocatable link. * testsuite/ld-elf/pr24819.d: New file. * testsuite/ld-elf/pr24819.s: Likewise.
generated by cgit v1.1 at 2024-12-18 05:12:53 +0000