| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since the last time AIX HOWTO table was modified, IBM has now
released an official documentation about XCOFF relocations.
This commit corrects the wrong ones and add some missing.
For now, the "custom" relocations made for xcoff_rtype2howto have
been kept.
The new relocations are still set as EMPTY_HOWTO because they will
be implemented in later commits.
In xcoff[64]_ppc_relocate_section, instead of recreating howto
from scratch, it's better to use the existing howto from the
table and fixing it according to r_size field.
bfd/
* coff-rs6000.c (xcoff_calculate_relocation): Correct and
add new relocations.
(xcoff_howto_table): Likewise.
(xcoff_rtype2howto): Increase r_type maximum value.
(xcoff_ppc_relocate_section): Reuse predefined HOWTOs instead
of create a new one from scratch. Enable only some relocations
to have a changing r_size.
* coff64-rs6000.c (xcoff64_calculate_relocation): Likewise.
(xcoff64_howto_table): Likewise.
(xcoff64_rtype2howto): Likewise.
(xcoff64_ppc_relocate_section): Likewise.
* libxcoff.h (XCOFF_MAX_CALCULATE_RELOCATION): Fix value.
binutils/
* od-xcoff.c: Replace RTB by TRL entry.
include/
* coff/xcoff.h (R_RTB): Remove.
(R_TRL): Fix value.
|
|
Adds support for including RISC-V control and status registers into
core files.
The value for the define NT_RISCV_CSR is set to 0x900, this
corresponds to a patch I have proposed for the Linux kernel here:
http://lists.infradead.org/pipermail/linux-riscv/2020-December/003910.html
As I have not yet heard if the above patch will be accepted into the
kernel or not I have set the note name string to "GDB", and the note
type to NT_RISCV_CSR.
This means that if the above patch is rejected from the kernel, and
the note type number 0x900 is assigned to some other note type, we
will still be able to distinguish between the GDB produced
NT_RISCV_CSR, and the kernel produced notes, where the name would be
set to "CORE".
bfd/ChangeLog:
* elf-bfd.h (elfcore_write_riscv_csr): Declare.
* elf.c (elfcore_grok_riscv_csr): New function.
(elfcore_grok_note): Handle NT_RISCV_CSR.
(elfcore_write_riscv_csr): New function.
(elfcore_write_register_note): Handle '.reg-riscv-csr'.
binutils/ChangeLog:
* readelf.c (get_note_type): Handle NT_RISCV_CSR.
include/ChangeLog:
* elf/common.h (NT_RISCV_CSR): Define.
|
|
This commit lays the ground work for allowing GDB to write its target
description into a generated core file.
The goal of this work is to allow a user to connect to a remote
target, capture a core file from within GDB, then pass the executable
and core file to another user and have the user be able to examine the
state of the machine without needing to connect to a running target.
Different remote targets can have different register sets and this
information is communicated from the target to GDB in the target
description.
It is possible for a user to extract the target description from GDB
and pass this along with the core file so that when the core file is
used the target description can be fed back into GDB, however this is
not a great user experience.
It would be nicer, I think, if GDB could write the target description
directly into the core file, and then make use of this description
when loading a core file.
This commit performs the binutils/bfd side of this task, adding the
boiler plate functions to access the target description from within a
core file note, and reserving a new number for a note containing the
target description. Later commits will extend GDB to make use of
this.
The new note is given the name 'GDB' and a type NT_GDB_TDESC. This
should hopefully protect us if there's ever a reuse of the number
assigned to NT_GDB_TDESC by some other core file producer. It should
also, hopefully, make it clearer to users that this note carries GDB
specific information.
bfd/ChangeLog:
* elf-bfd.h (elfcore_write_gdb_tdesc): Declare new function.
* elf.c (elfcore_grok_gdb_tdesc): New function.
(elfcore_grok_note): Handle NT_GDB_TDESC.
(elfcore_write_gdb_tdesc): New function.
(elfcore_write_register_note): Handle NT_GDB_TDESC.
binutils/ChangeLog:
* readelf.c (get_note_type): Handle NT_GDB_TDESC.
include/ChangeLog:
* elf/common.h (NT_GDB_TDESC): Define.
|
|
include/
* coff/internal.h: Delete obsolete relocation defines. Move used
relocation defines..
* coff/i386.h: ..to here..
* coff/ti.h: ..and here..
* coff/x86_64.h: ..and here..
* coff/z80.h: ..and here..
* coff/z8k.h: ..and here.
bfd/
* reloc.c: Include x86_64.h rather than internal.h.
|
|
The nondeduplicating CTF linker was kept around when the deduplicating
one was added so that people had something to fall back to in case the
deduplicating linker turned out to be buggy. It's now much more stable
than the nondeduplicating linker, in addition to much faster, using much
less memory and producing much better output. In addition, while
libctf has a linker flag to invoke the nondeduplicating linker, ld does
not expose it: the only way to turn it on within ld is an intentionally-
undocumented environment variable. So we can remove it without any ABI
or user-visibility concerns (the only thing we leave around is the
CTF_LINK_NONDEDUP flag, which can easily be interpreted as "deduplicate
less", though right now it does nothing).
This lets us remove a lot of complexity associated with tracking
filenames and CU names separately (something the deduplcating linker
never bothered with, since the cunames are always reliable and ld never
hands us useful filenames anyway)
The biggest lacuna left behind is the ctf_type_mapping machinery, which
slows down deduplicating links quite a lot. We can't just ditch it
because ctf_add_type uses it: removing the slowdown from the
deduplicating linker is a job for another commit.
include/ChangeLog
2021-03-02 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (CTF_LINK_SHARE_DUPLICATED): Note that this might
merely change how much deduplication is done.
libctf/ChangeLog
2021-03-02 Nick Alcock <nick.alcock@oracle.com>
* ctf-link.c (ctf_create_per_cu): Drop FILENAME now that it is
always identical to CUNAME.
(ctf_link_deduplicating_one_symtypetab): Adjust.
(ctf_link_one_type): Remove.
(ctf_link_one_input_archive_member): Likewise.
(ctf_link_close_one_input_archive): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link): No longer call it. Drop CTF_LINK_NONDEDUP path.
Improve header comment a bit (dicts, not files). Adjust
ctf_create_per_cu call.
(ctf_link_deduplicating_variables): Simplify.
(ctf_link_in_member_cb_arg_t) <cu_name>: Remove.
<in_input_cu_file>: Likewise.
<in_fp_parent>: Likewise.
<done_parent>: Likewise.
(ctf_link_one_variable): Turn uses of in_file_name to in_cuname.
|
|
When --gc-sections is in effect, a reference from a retained section
to __start_SECNAME or __stop_SECNAME causes all input sections named
SECNAME to also be retained, if SECNAME is representable as a C
identifier and either __start_SECNAME or __stop_SECNAME is synthesized
by the linker. Add an option to disable that feature, effectively
ignoring any relocation that references a synthesized linker defined
__start_ or __stop_ symbol.
PR 27451
include/
* bfdlink.h (struct bfd_link_info): Add start_stop_gc.
bfd/
* elflink.c (_bfd_elf_gc_mark_rsec): Ignore synthesized linker
defined start/stop symbols when start_stop_gc.
(bfd_elf_gc_mark_dynamic_ref_symbol): Likewise.
(bfd_elf_define_start_stop): Don't modify ldscript_def syms.
* linker.c (bfd_generic_define_start_stop): Likewise.
ld/
* emultempl/elf.em: Handle -z start-stop-gc and -z nostart-stop-gc.
* lexsup.c (elf_static_list_options): Display help for them. Move
help for -z stack-size to here from elf_shlib_list_options. Add
help for -z start-stop-visibility and -z undefs.
* ld.texi: Document -z start-stop-gc and -z nostart-stop-gc.
* NEWS: Mention -z start-stop-gc.
* testsuite/ld-gc/start2.s,
* testsuite/ld-gc/start2.d: New test.
* testsuite/ld-gc/gc.exp: Run it.
|
|
Note that we don't even warn if scripts adjust a symbol as in
ld-elf/var1 and ld-scripts/pr14962.
include/
* bfdlink.h (struct bfd_link_info): Add warn_multiple_definition.
ld/
* ldexp.c (exp_fold_tree_1): Warn on script defining a symbol
defined in an object file.
* ldmain.c (multiple_definition): Heed info->warn_multiple_definition.
* testsuite/ld-scripts/defined5.d: Expect a warning.
|
|
The existing ctf_lookup_by_symbol and ctf_arc_lookup_symbol functions
suffice to look up the types of symbols if the caller already has a
symbol number. But the caller often doesn't have one of those and only
knows the name of the symbol: also, in object files, the caller might
not have a useful symbol number in any sense (and neither does libctf:
the 'symbol number' we use in that case literally starts at 0 for the
lexicographically first-sorted symbol in the symtypetab and counts those
symbols, so it corresponds to nothing useful).
This means that even though object files have a symtypetab (generated by
the compiler or by ld -r), the only way we can look up anything in it is
to iterate over all symbols in turn with ctf_symbol_next until we find
the one we want.
This is unhelpful and pointlessly inefficient.
So add a pair of functions to look up symbols by name in a dict and in a
whole archive: ctf_lookup_by_symbol_name and ctf_arc_lookup_symbol_name.
These are identical to the existing functions except that they take
symbol names rather than symbol numbers.
To avoid insane repetition, we do some refactoring in the process, so
that both ctf_lookup_by_symbol and ctf_arc_lookup_symbol turn into thin
wrappers around internal functions that do both lookup by symbol index
and lookup by name. This massively reduces code duplication because
even the existing lookup-by-index stuff wants to use a name sometimes
(when looking up in indexed sections), and the new lookup-by-name stuff
has to turn it into an index sometimes (when looking up in non-indexed
sections): doing it this way lets us share most of that.
The actual name->index lookup is done by ctf_lookup_symbol_idx. We do
not anticipate this lookup to be as heavily used as ld.so symbol lookup
by many orders of magnitude, so using the ELF symbol hashes would
probably take more time to read them than is saved by using the hashes,
and it adds a lot of complexity. Instead, do a linear search for the
symbol name, caching all the name -> index mappings as we go, so that
future searches are likely to hit in the cache. To avoid having to
repeat this search over and over in a CTF archive when
ctf_arc_lookup_symbol_name is used, have cached archive lookups (the
sort done by ctf_arc_lookup_symbol* and the ctf_archive_next iterator)
pick out the first dict they cache in a given archive and store it in a
new ctf_archive field, ctfi_crossdict_cache. This can be used to store
cross-dictionary cached state that depends on things like the ELF symbol
table rather than the contents of any one dict. ctf_lookup_symbol_idx
then caches its name->index mappings in the dictionary named in the
crossdict cache, if any, so that ctf_lookup_symbol_idx in other dicts
in the same archive benefit from the previous linear search, and the
symtab only needs to be scanned at most once.
(Note that if you call ctf_lookup_by_symbol_name in one specific dict,
and then follow it with a ctf_arc_lookup_symbol_name, the former will
not use the crossdict cache because it's only populated by the dict
opens in ctf_arc_lookup_symbol_name. This is harmless except for a small
one-off waste of memory and time: it's only a cache, after all. We can
fix this later by using the archive caching machinery more
aggressively.)
In ctf-archive, we do similar things, turning ctf_arc_lookup_symbol into
a wrapper around a new function that does both index -> ID and name ->
ID lookups across all dicts in an archive. We add a new
ctfi_symnamedicts cache that maps symbol names to the ctf_dict_t * that
it was found in (so that linear searches for symbols don't need to be
repeated): but we also *remove* a cache, the ctfi_syms cache that was
memoizing the actual ctf_id_t returned from every call to
ctf_arc_lookup_symbol. This is pointless: all it saves is one call to
ctf_lookup_by_symbol, and that's basically an array lookup and nothing
more so isn't worth caching. (Equally, given that symbol -> index
mappings are cached by ctf_lookup_by_symbol_name, those calls are nearly
free after the first call, so there's no point caching the ctf_id_t in
that case either.)
We fix up one test that was doing manual symbol lookup to use
ctf_arc_lookup_symbol instead, and enhance it to check that the caching
layer is not totally broken: we also add a new test to do lookups in a
.o file, and another to do lookups in an archive with conflicted types
and make sure that sort of multi-dict lookup is actually working.
include/ChangeLog
2021-02-17 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_arc_lookup_symbol_name): New.
(ctf_lookup_by_symbol_name): Likewise.
libctf/ChangeLog
2021-02-17 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (ctf_dict_t) <ctf_symhash>: New.
<ctf_symhash_latest>: Likewise.
(struct ctf_archive_internal) <ctfi_crossdict_cache>: New.
<ctfi_symnamedicts>: New.
<ctfi_syms>: Remove.
(ctf_lookup_symbol_name): Remove.
* ctf-lookup.c (ctf_lookup_symbol_name): Propagate errors from
parent properly. Make static.
(ctf_lookup_symbol_idx): New, linear search for the symbol name,
cached in the crossdict cache's ctf_symhash (if available), or
this dict's (otherwise).
(ctf_try_lookup_indexed): Allow the symname to be passed in.
(ctf_lookup_by_symbol): Turn into a wrapper around...
(ctf_lookup_by_sym_or_name): ... this, supporting name lookup too,
using ctf_lookup_symbol_idx in non-writable dicts. Special-case
name lookup in dynamic dicts without reported symbols, which have
no symtab or dynsymidx but where name lookup should still work.
(ctf_lookup_by_symbol_name): New, another wrapper.
* ctf-archive.c (enosym): Note that this is present in
ctfi_symnamedicts too.
(ctf_arc_close): Adjust for removal of ctfi_syms. Free the
ctfi_symnamedicts.
(ctf_arc_flush_caches): Likewise.
(ctf_dict_open_cached): Memoize the first cached dict in the
crossdict cache.
(ctf_arc_lookup_symbol): Turn into a wrapper around...
(ctf_arc_lookup_sym_or_name): ... this. No longer cache
ctf_id_t lookups: just call ctf_lookup_by_symbol as needed (but
still cache the dicts those lookups succeed in). Add
lookup-by-name support, with dicts of successful lookups cached in
ctfi_symnamedicts. Refactor the caching code a bit.
(ctf_arc_lookup_symbol_name): New, another wrapper.
* ctf-open.c (ctf_dict_close): Free the ctf_symhash.
* libctf.ver (LIBCTF_1.2): New version. Add
ctf_lookup_by_symbol_name, ctf_arc_lookup_symbol_name.
* testsuite/libctf-lookup/enum-symbol.c (main): Use
ctf_arc_lookup_symbol rather than looking up the name ourselves.
Fish it out repeatedly, to make sure that symbol caching isn't
broken.
(symidx_64): Remove.
(symidx_32): Remove.
* testsuite/libctf-lookup/enum-symbol-obj.lk: Test symbol lookup
in an unlinked object file (indexed symtypetab sections only).
* testsuite/libctf-writable/symtypetab-nonlinker-writeout.c
(try_maybe_reporting): Check symbol types via
ctf_lookup_by_symbol_name as well as ctf_symbol_next.
* testsuite/libctf-lookup/conflicting-type-syms.*: New test of
lookups in a multi-dict archive.
|
|
* Renamed obsolete UJ/SB types and RVC types, also added CSS/CL(CS) types,
[VALID/EXTRACT/ENCODE macros]
BTYPE_IMM: Renamed from SBTYPE_IMM.
JTYPE_IMM: Renamed from UJTYPE_IMM.
CITYPE_IMM: Renamed from RVC_IMM.
CITYPE_LUI_IMM: Renamed from RVC_LUI_IMM.
CITYPE_ADDI16SP_IMM: Renamed from RVC_ADDI16SP_IMM.
CITYPE_LWSP_IMM: Renamed from RVC_LWSP_IMM.
CITYPE_LDSP_IMM: Renamed from RVC_LDSP_IMM.
CIWTYPE_IMM: Renamed from RVC_UIMM8.
CIWTYPE_ADDI4SPN_IMM: Renamed from RVC_ADDI4SPN_IMM.
CSSTYPE_IMM: Added for .insn without special encoding.
CSSTYPE_SWSP_IMM: Renamed from RVC_SWSP_IMM.
CSSTYPE_SDSP_IMM: Renamed from RVC_SDSP_IMM.
CLTYPE_IMM: Added for .insn without special encoding.
CLTYPE_LW_IMM: Renamed from RVC_LW_IMM.
CLTYPE_LD_IMM: Renamed from RVC_LD_IMM.
RVC_SIMM3: Unused and removed.
CBTYPE_IMM: Renamed from RVC_B_IMM.
CJTYPE_IMM: Renamed from RVC_J_IMM.
* Added new operands and removed the unused ones,
C5: Unsigned CL(CS) immediate, added for .insn directive.
C6: Unsigned CSS immediate, added for .insn directive.
Ci: Unused and removed.
C<: Unused and removed.
bfd/
PR 27158
* elfnn-riscv.c (perform_relocation): Updated encoding macros.
(_bfd_riscv_relax_call): Likewise.
(_bfd_riscv_relax_lui): Likewise.
* elfxx-riscv.c (howto_table): Likewise.
gas/
PR 27158
* config/tc-riscv.c (riscv_ip): Updated encoding macros.
(md_apply_fix): Likewise.
(md_convert_frag_branch): Likewise.
(validate_riscv_insn): Likewise. Also arranged operands, including
added C5 and C6 operands, and removed unused Ci and C< operands.
* doc/c-riscv.texi: Updated and added CSS/CL/CS types.
* testsuite/gas/riscv/insn.d: Added CSS/CL/CS instructions.
* testsuite/gas/riscv/insn.s: Likewise.
gdb/
PR 27158
* riscv-tdep.c (decode_ci_type_insn): Updated encoding macros.
(decode_j_type_insn): Likewise.
(decode_cj_type_insn): Likewise.
(decode_b_type_insn): Likewise.
(decode): Likewise.
include/
PR 27158
* opcode/riscv.h: Updated encoding macros.
opcodes/
PR 27158
* riscv-dis.c (print_insn_args): Updated encoding macros.
* riscv-opc.c (MASK_RVC_IMM): defined to ENCODE_CITYPE_IMM.
(match_c_addi16sp): Updated encoding macros.
(match_c_lui): Likewise.
(match_c_lui_with_hint): Likewise.
(match_c_addi4spn): Likewise.
(match_c_slli): Likewise.
(match_slli_as_c_slli): Likewise.
(match_c_slli64): Likewise.
(match_srxi_as_c_srxi): Likewise.
(riscv_insn_types): Added .insn css/cl/cs.
sim/
PR 27158
* riscv/sim-main.c (execute_i): Updated encoding macros.
|
|
Make the opcode/riscv-opc.c and include/opcode/riscv.h tidy, move the
spec versions stuff to bfd/cpu-riscv.h. Also move the csr stuff and
ext_version_table to gas/config/tc-riscv.c for internal use. To avoid
too many repeated code, define general RISCV_GET_SPEC_NAME/SPEC_CLASS
macros. Therefore, assembler/dis-assembler/linker/gdb can get all spec
versions related stuff from cpu-riscv.h and cpu-riscv.c, since the stuff
are defined there uniformly.
bfd/
* Makefile.am: Added cpu-riscv.h.
* Makefile.in: Regenerated.
* po/SRC-POTFILES.in: Regenerated.
* cpu-riscv.h: Added to support spec versions controlling.
Also added extern arrays and functions for cpu-riscv.c.
(enum riscv_spec_class): Define all spec classes here uniformly.
(struct riscv_spec): Added for all specs.
(RISCV_GET_SPEC_CLASS): Added to reduce repeated code.
(RISCV_GET_SPEC_NAME): Likewise.
(RISCV_GET_ISA_SPEC_CLASS): Added to get ISA spec class.
(RISCV_GET_PRIV_SPEC_CLASS): Added to get privileged spec class.
(RISCV_GET_PRIV_SPEC_NAME): Added to get privileged spec name.
* cpu-riscv.c (struct priv_spec_t): Replaced with struct riscv_spec.
(riscv_get_priv_spec_class): Replaced with RISCV_GET_PRIV_SPEC_CLASS.
(riscv_get_priv_spec_name): Replaced with RISCV_GET_PRIV_SPEC_NAME.
(riscv_priv_specs): Moved below.
(riscv_get_priv_spec_class_from_numbers): Likewise, updated.
(riscv_isa_specs): Moved from include/opcode/riscv.h.
* elfnn-riscv.c: Included cpu-riscv.h.
(riscv_merge_attributes): Initialize in_priv_spec and out_priv_spec.
* elfxx-riscv.c: Included cpu-riscv.h and opcode/riscv.h.
(RISCV_UNKNOWN_VERSION): Moved from include/opcode/riscv.h.
* elfxx-riscv.h: Removed extern functions to cpu-riscv.h.
gas/
* config/tc-riscv.c: Included cpu-riscv.h.
(enum riscv_csr_clas): Moved from include/opcode/riscv.h.
(struct riscv_csr_extra): Likewise.
(struct riscv_ext_version): Likewise.
(ext_version_table): Moved from opcodes/riscv-opc.c.
(default_isa_spec): Updated type to riscv_spec_class.
(default_priv_spec): Likewise.
(riscv_set_default_isa_spec): Updated.
(init_ext_version_hash): Likewise.
(riscv_init_csr_hash): Likewise, also fixed indent.
include/
* opcode/riscv.h: Moved stuff and make the file tidy.
opcodes/
* riscv-dis.c: Included cpu-riscv.h, and removed elfxx-riscv.h.
(default_priv_spec): Updated type to riscv_spec_class.
(parse_riscv_dis_option): Updated.
* riscv-opc.c: Moved stuff and make the file tidy.
|
|
opcodes/
* s390-mkopc.c (main): Accept arch14 as cpu string.
* s390-opc.txt: Add new arch14 instructions.
include/
* opcode/s390.h (enum s390_opcode_cpu_val): Add
S390_OPCODE_ARCH14.
gas/
* config/tc-s390.c (s390_parse_cpu): New entry for arch14.
* doc/c-s390.texi: Document arch14 march option.
* testsuite/gas/s390/s390.exp: Run the arch14 related tests.
* testsuite/gas/s390/zarch-arch14.d: New test.
* testsuite/gas/s390/zarch-arch14.s: New test.
|
|
The tic54x exports some fairly generic variable names that can
conflict with programs that use them, so put proper tic54x_
prefixes on all of them.
|
|
include/
PR 27348
* opcode/riscv.h: Remove obsolete OP_*CUSTOM_IMM.
|
|
include/
PR 27348
* opcode/riscv-opc.h: Remove obsolete Xcustom support.
|
|
Now the simulator can be loaded via gdb using "target sim".
|
|
Now that "anonymous typedef nodes" have been extirpated, we can mandate
that things that have names in C must have names in CTF too. (Unlike
the no-forwards embarrassment, the deduplicator does nothing special
with names: types that have names in C will have the same name in CTF.
So we can assume that the CTF rules and the C rules are the same.)
include/ChangeLog
2021-01-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ECTF_NONAME): New.
(ECTF_NERR): Adjust.
libctf/ChangeLog
2021-01-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-create.c (ctf_add_encoded): Add check for non-empty name.
(ctf_add_forward): Likewise.
(ctf_add_typedef): Likewise.
|
|
The variable section in a CTF dict is meant to contain the types of
variables that do not appear in the symbol table (mostly file-scope
static declarations). We implement this by having the compiler emit
all potential data symbols into both sections, then delete those
symbols from the variable section that correspond to data symbols the
linker has reported.
Unfortunately, the check for this in ctf_serialize is wrong: rather than
checking the set of linker-reported symbols, we check the set of names
in the data object symtypetab section: if the linker has reported no
symbols at all (usually if ld -r has been run, or if a non-linker
program that does not use symbol tables is calling ctf_link) this will
include every single symbol, emptying the variable section completely.
Worse, when ld -r is in use, we want to force writeout of every
symtypetab entry on the inputs, in an indexed section, whether or not
the linker has reported them, since this isn't a final link yet and the
symbol table is not finalized (and may grow more symbols than the linker
has yet reported). But the check for this is flawed too: we were
relying on ctf_link_shuffle_syms not having been called if no symbols
exist, but that function is *always* called by ld even when ld -r is in
use: ctf_link_add_linker_symbol is the one that's not called when there
are no symbols.
We clearly need to rethink this. Using the emptiness of the set of
reported symbols as a test for ld -r is just ugly: the linker already
knows if ld -r is underway and can just tell us. So add a new linker
flag CTF_LINK_NO_FILTER_REPORTED_SYMS that is set to stop the linker
filtering the symbols in the symtypetab sections using the set that the
linker has reported: use the presence or absence of this flag to
determine whether to emit unindexed symtabs: we only remove entries from
the variable section when filtering symbols, and we only remove them if
they are in the reported symbol set, fixing the case where no symbols
are reported by the linker at all.
(The negative sense of the new CTF_LINK flag is intentional: the common
case, both for ld and for simple tools that want to do a ctf_link with
no ELF symbol table in sight, is probably to filter out symbols that no
linker has reported: i.e., for the simple tools, all of them.)
There's another wrinkle, though. It is quite possible for a non-linker
to add symbols to a dict via ctf_add_*_sym and then write it out via the
ctf_write APIs: perhaps it's preparing a dict for a later linker
invocation. Right now this would not lead to anything terribly
meaningful happening: ctf_serialize just assumes it was called via
ctf_link if symbols are present. So add an (internal-to-libctf) flag
that indicates that a writeout is happening via ctf_link_write, and set
it there (propagating it to child dicts as needed). ctf_serialize can
then spot when it is not being called by a linker, and arrange to always
write out an indexed, sorted symtypetab for fastest possible future
symbol lookup by name in that case. (The writeouts done by ld -r are
unsorted, because the only thing likely to use those symtabs is the
linker, which doesn't benefit from symtypetab sorting.)
Tests added for all three linking cases (ld -r, ld -shared, ld), with a
bit of testsuite framework enhancement to stop it unconditionally
linking the CTF to be checked by the lookup program with -shared, so
tests can now examine CTF linked with -r or indeed with no flags at all,
though the output filename is still foo.so even in this case.
Another test added for the non-linker case that endeavours to determine
whether the symtypetab is sorted by examining the order of entries
returned from ctf_symbol_next: nobody outside libctf should rely on
this ordering, but this test is not outside libctf :)
include/ChangeLog
2021-01-26 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (CTF_LINK_NO_FILTER_REPORTED_SYMS): New.
ld/ChangeLog
2021-01-26 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_merge_ctf): Set CTF_LINK_NO_FILTER_REPORTED_SYMS
when appropriate.
libctf/ChangeLog
2021-01-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.c (_libctf_nonnull_): Add parameters.
(LCTF_LINKING): New flag.
(ctf_dict_t) <ctf_link_flags>: Mention it.
* ctf-link.c (ctf_link): Keep LCTF_LINKING set across call.
(ctf_write): Likewise, including in child dictionaries.
(ctf_link_shuffle_syms): Make sure ctf_dynsyms is NULL if there
are no reported symbols.
* ctf-create.c (symtypetab_delete_nonstatic_vars): Make sure
the variable has been reported as a symbol by the linker.
(symtypetab_skippable): Mention relationship between SYMFP and the
flags.
(symtypetab_density): Adjust nonnullity. Exit early if no symbols
were reported and force-indexing is off (i.e., we are doing a
final link).
(ctf_serialize): Handle the !LCTF_LINKING case by writing out an
indexed, sorted symtypetab (and allow SYMFP to be NULL in this
case). Turn sorting off if this is a non-final link. Only delete
nonstatic vars if we are filtering symbols and the linker has
reported some.
* testsuite/libctf-regression/nonstatic-var-section-ld-r*:
New test of variable and symtypetab section population when
ld -r is used.
* testsuite/libctf-regression/nonstatic-var-section-ld-executable.lk:
Likewise, when ld of an executable is used.
* testsuite/libctf-regression/nonstatic-var-section-ld.lk:
Likewise, when ld -shared alone is used.
* testsuite/libctf-regression/nonstatic-var-section-ld*.c:
Lookup programs for the above.
* testsuite/libctf-writable/symtypetab-nonlinker-writeout.*: New
test, testing survival of symbols across ctf_write paths.
* testsuite/lib/ctf-lib.exp (run_lookup_test): New option,
nonshared, suppressing linking of the SOURCE with -shared.
|
|
bfd/
* elfxx-riscv.c (riscv_parse_prefixed_ext): Removed zb*.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Removed
INSN_CLASS_ZB*.
* testsuite/gas/riscv/bitmanip-insns-32.d: Removed.
* testsuite/gas/riscv/bitmanip-insns-64.d: Removed.
* testsuite/gas/riscv/bitmanip-insns.s: Removed.
include/
* opcode/riscv-opc.h: Removed macros for zb* extensions.
* opcode/riscv.h (riscv_insn_class): Removed INSN_CLASS_ZB*.
opcodes/
* riscv-opc.c (MASK_RVB_IMM): Removed.
(riscv_opcodes): Removed zb* instructions.
(riscv_ext_version_table): Removed versions for zb*.
|
|
bfd/
* elfnn-riscv.c: Indent, labels and GNU coding standards tidy,
also aligned the code.
gas/
* config/tc-riscv.c: Indent and GNU coding standards tidy,
also aligned the code.
* config/tc-riscv.h: Likewise.
include/
* opcode/riscv.h: Indent and GNU coding standards tidy,
also aligned the code.
opcodes/
* riscv-opc.c (riscv_gpr_names_abi): Aligned the code.
(riscv_fpr_names_abi): Likewise.
(riscv_opcodes): Likewise.
(riscv_insn_types): Likewise.
|
|
The GNU coding standards said the comments should be complete sentences
and end with a period and two spaces. But sometimes it should be more
cleaner when the comments only include a word or codes. Therefore, I made
the following changes after referring to other target/generic codes,
* Try to write sentences in comments, must end with a period and two spaces.
* End with two spaces without a period for codes/instructions only.
* End with one space without a period for a single word/variable only.
Besids, also rewrite/remove some comments which are obsolete or too long,
and fix indents for comments.
bfd/
* elfnn-riscv.c: Comments tidy and improvement.
* elfxx-riscv.c: Likewise.
* elfxx-riscv.h: Likewise.
gas/
* config/tc-riscv.c: Comments tidy and improvement. Also update
comment "fallthru" to "Fall through" that end with a period and
two spaces.
include/
* elf/riscv.h: Comments tidy and improvement.
* opcode/riscv-opc.h: Likewise.
* opcode/riscv.h: Likewise.
opcodes/
* riscv-dis.c: Comments tidy and improvement.
* riscv-opc.c: Likewise.
|
|
This patch removes support for the CSRE extension from aarch64
gas/objdump.
CSRE (FEAT_CSRE) is part of the Future Architecture Technologies program
and at this time Arm is withdrawing this particular feature.
The patch removes the system registers and the CSR PDEC instruction.
gas/ChangeLog
* NEWS: Remove CSRE.
* config/tc-aarch64.c (parse_csr_operand): Delete.
(parse_operands): Delete handling of AARCH64_OPND_CSRE_CSR.
(aarch64_features): Remove csre.
* doc/c-aarch64.texi: Remove CSRE.
* testsuite/gas/aarch64/csre.d: Delete.
* testsuite/gas/aarch64/csre-invalid.s: Likewise.
* testsuite/gas/aarch64/csre-invalid.d: Likewise.
* testsuite/gas/aarch64/csre_csr.s: Likewise.
* testsuite/gas/aarch64/csre_csr.d: Likewise.
* testsuite/gas/aarch64/csre_csr-invalid.s: Likewise.
* testsuite/gas/aarch64/csre_csr-invalid.l: Likewise.
* testsuite/gas/aarch64/csre_csr-invalid.d: Likewise.
include/ChangeLog
* opcode/aarch64.h (AARCH64_FEATURE_CSRE): Delete.
(aarch64_opnd): Delete AARCH64_OPND_CSRE_CSR.
opcodes/ChangeLog
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-opc.c (aarch64_print_operand): Delete handling of
AARCH64_OPND_CSRE_CSR.
* aarch64-tbl.h (aarch64_feature_csre): Delete.
(CSRE): Likewise.
(_CSRE_INSN): Likewise.
(aarch64_opcode_table): Delete csr.
|
|
|
|
This allows gdb to quickly dump & process the memory map that the sim
knows about. This isn't fully accurate, but is largely limited by the
gdb memory map format. While the sim supports RWX bits, gdb can only
handle RW or RO regions.
|
|
Add support for the pause hint instruction, as specified in the
Zihintpause extension. The pause instruction is encoded as a
special form of a memory fence (which is available as part of the
base instruction set). The chosen encoding does not mandate any
particular memory ordering and therefore is a true hint.
bfd/
* elfxx-riscv.c (riscv_std_z_ext_strtab): Added zihintpause.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Added
INSN_CLASS_ZIHINTPAUSE.
* testsuite/gas/riscv/pause.d: New testcase. Adding coverage for
the pause hint instruction.
* testsuite/gas/riscv/pause.s: Likewise.
include/
* opcode/riscv-opc.h: Added MATCH_PAUSE, MASK_PAUSE and DECLARE_INSN
for pause hint instruction.
* opcode/riscv.h (enum riscv_insn_class): Added INSN_CLASS_ZIHINTPAUSE.
opcodes/
* riscv-opc.c (riscv_opcodes): Add pause hint instruction.
|
|
In fact rev8/orc.b/zext.h are the aliases of grevi/gorci/pack[w], so we
should update them to INSN_ALIAS when we have supported their true instruction
in the future. Though we still use the [MATCH|MAKS]_[GREVI|GORCI|PACK|PACKW]
to encode them. Besides, the orc.b has the same encoding both in rv32 and
rv64, so we just keep one of them in the opcode table.
This patch is implemented according to the following link,
https://github.com/riscv/riscv-bitmanip/pull/101
2021-01-07 Claire Xenia Wolf <claire@symbioticeda.com>
Jim Wilson <jimw@sifive.com>
Andrew Waterman <andrew@sifive.com>
Maxim Blinov <maxim.blinov@embecosm.com>
Kito Cheng <kito.cheng@sifive.com>
Nelson Chu <nelson.chu@sifive.com>
bfd/
* elfxx-riscv.c (riscv_std_z_ext_strtab): Added zba, zbb and zbc.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZB*.
(riscv_get_default_ext_version): Do not check the default_isa_spec when
the version defined in the riscv_opcodes table is ISA_SPEC_CLASS_DRAFT.
* testsuite/gas/riscv/bitmanip-insns-32.d: New testcase.
* testsuite/gas/riscv/bitmanip-insns-64.d: Likewise.
* testsuite/gas/riscv/bitmanip-insns.s: Likewise.
include/
* opcode/riscv-opc.h: Added MASK/MATCH/DECLARE_INSN for ZBA/ZBB/ZBC.
* opcode/riscv.h (riscv_insn_class): Added INSN_CLASS_ZB*.
(enum riscv_isa_spec_class): Added ISA_SPEC_CLASS_DRAFT for the
frozen extensions.
opcodes/
* riscv-opc.c (riscv_opcodes): Add ZBA/ZBB/ZBC instructions.
(MASK_RVB_IMM): Used for rev8 and orc.b encoding.
|
|
libctf has no intrinsic support for the GCC unnamed structure member
extension. This principally means that you can't look up named members
inside unnamed struct or union members via ctf_member_info: you have to
tiresomely find out the type ID of the unnamed members via iteration,
then look in each of these.
This is ridiculous. Fix it by extending ctf_member_info so that it
recurses into unnamed members for you: this is still unambiguous because
GCC won't let you create ambiguously-named members even in the presence
of this extension.
For consistency, and because the release hasn't happened and we can
still do this, break the ctf_member_next API and add flags: we specify
one flag, CTF_MN_RECURSE, which if set causes ctf_member_next to
automatically recurse into unnamed members for you, returning not only
the members themselves but all their contained members, so that you can
use ctf_member_next to identify every member that it would be valid to
call ctf_member_info with.
New lookup tests are added for all of this.
include/ChangeLog
2021-01-05 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (CTF_MN_RECURSE): New.
(ctf_member_next): Add flags argument.
libctf/ChangeLog
2021-01-05 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (struct ctf_next) <u.ctn_next>: Move to...
<ctn_next>: ... here.
* ctf-util.c (ctf_next_destroy): Unconditionally destroy it.
* ctf-lookup.c (ctf_symbol_next): Adjust accordingly.
* ctf-types.c (ctf_member_iter): Reimplement in terms of...
(ctf_member_next): ... this. Support recursive unnamed member
iteration (off by default).
(ctf_member_info): Look up members in unnamed sub-structs.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_member_next call.
(ctf_dedup_emit_struct_members): Likewise.
* testsuite/libctf-lookup/struct-iteration-ctf.c: Test empty unnamed
members, and a normal member after the end.
* testsuite/libctf-lookup/struct-iteration.c: Verify that
ctf_member_count is consistent with the number of successful returns
from a non-recursive ctf_member_next.
* testsuite/libctf-lookup/struct-iteration-*: New, test iteration
over struct members.
* testsuite/libctf-lookup/struct-lookup.c: New test.
* testsuite/libctf-lookup/struct-lookup.lk: New test.
|
|
C allows you to do only a very few things with entities of incomplete
type (as opposed to pointers to them): make pointers to them and give
them cv-quals, roughly. In particular you can't sizeof them and you
can't get their alignment.
We cannot impose all the requirements the standard imposes on CTF users,
because the deduplicator can transform any structure type into a forward
for the purposes of breaking cycles: so CTF type graphs can easily
contain things like arrays of forward type (if you want to figure out
their size or alignment, you need to chase down the types this forward
might be a forward to in child TU dicts: we will soon add API functions
to make doing this much easier).
Nonetheless, it is still meaningless to ask for the size or alignment of
forwards: but libctf didn't prohibit this and returned nonsense from
internal implementation details when you asked (it returned the kind of
the pointed-to type as both the size and alignment, because forwards
reuse ctt_type as a type kind, and ctt_type and ctt_size overlap). So
introduce a new error, ECTF_INCOMPLETE, which is returned when you try
to get the size or alignment of forwards: we also return it when you try
to do things that require libctf itself to get the size or alignment of
a forward, notably using a forward as an array index type (which C
should never do in any case) or adding forwards to structures without
specifying their offset explicitly.
The dumper will not emit size or alignment info for forwards any more.
(This should not be an API break since ctf_type_size and ctf_type_align
could both return errors before now: any code that isn't expecting error
returns is already potentially broken.)
include/ChangeLog
2021-01-05 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ECTF_INCOMPLETE): New.
(ECTF_NERR): Adjust.
ld/ChangeLog
2021-01-05 Nick Alcock <nick.alcock@oracle.com>
* testsuite/ld-ctf/conflicting-cycle-1.parent.d: Adjust for dumper
changes.
* testsuite/ld-ctf/cross-tu-cyclic-conflicting.d: Likewise.
* testsuite/ld-ctf/forward.c: New test...
* testsuite/ld-ctf/forward.d: ... and results.
libctf/ChangeLog
2021-01-05 Nick Alcock <nick.alcock@oracle.com>
* ctf-types.c (ctf_type_resolve): Improve comment.
(ctf_type_size): Yield ECTF_INCOMPLETE when applied to forwards.
Emit errors into the right dict.
(ctf_type_align): Likewise.
* ctf-create.c (ctf_add_member_offset): Yield ECTF_INCOMPLETE
when adding a member without explicit offset when this member, or
the previous member, is incomplete.
* ctf-dump.c (ctf_dump_format_type): Do not try to print the size of
forwards.
(ctf_dump_member): Do not try to print their alignment.
|
|
PR 27116
bfd/
* xcofflink.c: Correct spelling in comments.
binutils/
* coffgrok.c (do_type): Correct spelling of auxiliary in errors.
* doc/binutils.texi: Correct grammar.
* readelf.c (process_version_sections): Correct spelling of auxiliary
in warning.
* testsuite/binutils-all/vax/objdump.exp: Comment grammar fix.
config/
* override.m4: Correct comment grammar.
gas/
* config/tc-i386.c: Correct comment spelling.
* config/tc-riscv.c: Likewise.
* config/tc-s390.c: Correct comment grammar.
* doc/c-i386.texi: Correct spelling.
* doc/c-s390.texi: Correct grammar.
gold/
* tilegx.cc: Correct comment spelling.
gprof/
* README: Correct grammar.
* gprof.texi: Likewise.
include/
* coff/internal.h: Correct comment spelling.
* coff/sym.h: Likewise.
* opcode/aarch64.h: Likewise.
ld/
* configure.tgt: Correct comment grammar.
* emultempl/m68hc1xelf.em: Likewise.
* ld.texi: Correct grammar.
|
|
|
|
|
|
Add Intel Linear Address Masking (LAM) property support. LAM modifies
the checking that is applied to 64-bit linear addresses, allowing
software to use of the untranslated address bits for metadata.
bfd/
* elf-linker-x86.h (elf_x86_cet_report): Renamed to ...
(elf_x86_prop_report): This.
(elf_linker_x86_params): Add lam_u48, lam_u57, lam_u48_report
and lam_u57_report.
* elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_LAM_U48 and
GNU_PROPERTY_X86_FEATURE_1_LAM_U57.
(_bfd_x86_elf_link_fixup_gnu_properties): Keep LAM features only
for 64-bit output.
binutils/
* NEWS: Mention LAM_U48 and LAM_U57 support.
* elfedit.c (elf_x86_feature): Support lam_u48 and lam_u57.
(usage): Add lam_u48 and lam_u57.
* readelf.c (decode_x86_feature_1): Support LAM_U48 and LAM_U57.
* doc/binutils.texi: Update elfedit with lam_u48 and lam_u57
support.
* testsuite/binutils-all/x86-64/lam-u48.d: New file.
* testsuite/binutils-all/x86-64/lam-u48.s: Likewise.
* testsuite/binutils-all/x86-64/lam-u57.d: Likewise.
* testsuite/binutils-all/x86-64/lam-u57.s: Likewise.
include/
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_LAM_U48): New.
(GNU_PROPERTY_X86_FEATURE_1_LAM_U57): Likewise.
ld/
* NEWS: Mention LAM_U48 and LAM_U57 support.
* ld.texi: Document LAM_U48 and LAM_U57 support.
* emulparams/cet.sh: Updated.
* emulparams/elf_x86_64.sh: Source x86-64-lam.sh.
* emulparams/x86-64-lam.sh: New file.
* testsuite/ld-x86-64/property-x86-lam-u48-1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u48-1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u48-2.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u48-3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u48-3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u48-4.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u48-5.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u48.s: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57-1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57-1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57-2.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57-3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57-3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57-4.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57-5.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run LAM tests.
|
|
bfd/
* elf32-microblaze.c (dbg): Delete unused variable.
* elf32-nds32.c (relax_group_section_id_list): Make static.
* som.c (reloc_queue): Make static.
* xtensa-isa.c (xtisa_errno, xtisa_error_msg): Make static.
include/
* xtensa-isa-internal.h (xtisa_errno, xtisa_error_msg): Delete.
|
|
bfd/
* coff-z80.c (bfd_howto_type): Make typedef const.
* elf32-z80.c (bfd_howto_type): Likewise.
* elf32-m32c.c (EncodingTable): Likewise.
* elf32-csky.c (csky_arch_for_merge): Likewise.
(csky_archs): Use typedef.
* elf32-m68hc11.c (m68hc11_direct_relax_table): Make const.
(find_relaxable_insn, m68hc11_elf_relax_section): Adjust to suit.
* elf32-ppc.c (ppc_alt_plt): Make const.
* elf32-rl78.c (relax_addr16): Likewise.
* targets.c (_bfd_associated_vector): Likewise.
(bfd_target_vector, bfd_associated_vector): Likewise.
* libbfd-in.h (bfd_target_vector, bfd_associated_vector): Likewise.
* libbfd.h: Regenerate.
include/
* opcode/arc-attrs.h (CONFLICT_LIST): Make const.
|
|
elfNN_bed was made writable as an expedient means of communicating
ld -z max-page-size and ld -z common-page-size values to BFD linker
code, and even for objcopy to communicate segment alignment between
copy_private_bfd_data, rewrite_elf_program_header and
assign_file_positions_for_load_sections. Some time later elfNN_bed
elf_osabi was written by gas. It turns out none of these
modifications to elfNN_bed was necessary, so make it const again.
include/
* bfdlink.h (struct bfd_link_info): Add maxpagesize and
commonpagesize.
bfd/
* elfxx-target.h (elfNN_bed): Constify.
* bfd.c (bfd_elf_set_pagesize): Delete.
(bfd_emul_set_maxpagesize, bfd_emul_set_commonpagesize): Delete.
* elf.c (get_program_header_size): Get commonpagesize from
link info.
(_bfd_elf_map_sections_to_segments): Get maxpagesize from link info.
(assign_file_positions_for_load_sections): Likewise.
(assign_file_positions_for_non_load_sections): Likewise.
(rewrite_elf_program_header): Add maxpagesize param. Set map_p_align.
(copy_private_bfd_data): Don't call bfd_elf_set_maxpagesize.
Instead pass maxpagesize to rewrite_elf_program_header.
* elf32-nds32.c (relax_range_measurement): Add link_info param.
Get maxpagesize from link_info. Adjust caller.
* bfd-in2.h: Regenerate.
gas/
* config/obj-elf.c (obj_elf_section): Don't set elf_osabi here.
(obj_elf_type): Likewise.
ld/
* ld.h (ld_config_type): Delete maxpagesize and commonpagesize.
* emultempl/elf.em: Use link_info rather than config
for maxpagesize and commonpagesize.
* emultempl/ppc32elf.em: Likewise.
* ldexp.c (fold_binary, fold_name): Likewise.
* ldemul.c (after_parse_default): Likewise.
(set_output_arch_default): Don't call bfd_emul_set_maxpagesize
or bfd_emul_set_commonpagesize.
|
|
Move lots of read-only arrays to .rodata.
include/
* xtensa-isa-internal.h (xtensa_format_internal),
(xtensa_slot_internal, xtensa_operand_internal),
(xtensa_arg_internal, xtensa_iclass_internal),
(xtensa_opcode_internal, xtensa_regfile_internal),
(xtensa_interface_internal, xtensa_funcUnit_internal),
(xtensa_state_internal, xtensa_sysreg_internal): Constify.
bfd/
* elf32-xtensa.c (narrowable, widenable): Constify.
* xtensa-modules.c: Constify many arrays.
|
|
Add (or suppress) a DT_GNU_FLAGS_1 dynamic section
with a bit flag value of DF_GNU_1_UNIQUE.
bfd/
* elflink.c (bfd_elf_size_dynamic_sections): Call
_bfd_elf_add_dynamic_entry to add a DT_GNU_FLAGS_1 section.
include/
* bfdlink.h (struct bfd_link_info): New field gnu_flags_1.
ld/
* emultempl/elf.em (gld${EMULATION_NAME}_handle_option):
Parse -z unique / -z nounique options.
|
|
DT_GNU_FLAGS_1 added to the DT_VALRNGLO-DT_VALRNGHI range.
DT_GNU_FLAGS_1 value DF_GNU_1_UNIQUE added.
* elf/common.h (DT_GNU_FLAGS_1, DF_GNU_1_UNIQUE): Define.
|
|
binutils/
* readelf.c (get_machine_name): Update list of e_machine values.
include/
* elf/common.h: Update list of e_machine values.
|
|
https://github.com/riscv/riscv-asm-manual/pull/61
We aleady have sext.w, so just add sext.b, sext.h, zext.b, zext.h
and zext.w. In a certain sense, zext.b is not a pseudo - It is an
alias of andi. Similarly, sext.b and sext.h are aliases of other
rvb instructions, when we enable b extension; But they are pseudos
when we just enable rvi. However, this patch does not consider the
rvb cases. Besides, zext.w is only valid in rv64.
gas/
* config/tc-riscv.c (riscv_ext): New function. Use md_assemblef
to expand the zext and sext pseudos, to give them a chance to be
expanded into c-ext instructions.
(macro): Handle M_ZEXTH, M_ZEXTW, M_SEXTB and M_SEXTH.
* testsuite/gas/riscv/ext.s: New testcase.
* testsuite/gas/riscv/ext-32.d: Likewise.
* testsuite/gas/riscv/ext-64.d: Likewise.
include/
* opcode/riscv.h (M_ZEXTH, M_ZEXTW, M_SEXTB, M_SEXTH.): Added.
opcodes/
* riscv-opc.c (riscv_opcodes): Add sext.[bh] and zext.[bhw].
|
|
bfd/
* elfxx-riscv.c (riscv_ext_dont_care_version): New function. Return
TRUE if we don't care the versions of the extensions. These extensions
are added to the subset list for special purposes, with the explicit
versions or the RISCV_UNKNOWN_VERSION versions.
(riscv_parse_add_subset): If we do care the versions of the extension,
and the versions are unknown, then report errors for the non-implicit
extensions, and return directly for the implicit one.
(riscv_arch_str1): Do not output i extension after e, and the extensions
which versions are unknown.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZICSR
and INSN_CLASS_ZIFENCEI.
* testsuite/gas/riscv/march-imply-i.s: New testcase.
* testsuite/gas/riscv/march-imply-i2p0-01.d: New testcase. The version
of i is less than 2.1, and zi* are supported in the chosen spec, so
enable the fence.i and csr instructions, also output the implicit zi* to
the arch string.
* testsuite/gas/riscv/march-imply-i2p0-02.d: Likewise, but the zi* are
not supported in the spec 2.2. Enable the related instructions since
i's version is less than 2.1, but do not output them.
* testsuite/gas/riscv/march-imply-i2p1-01.d: New testcase. The version
of i is 2.1, so don't add it's implicit zi*, and disable the related
instructions.
* testsuite/gas/riscv/march-imply-i2p1-01.l: Likewise.
* testsuite/gas/riscv/march-imply-i2p1-02.d: Likewise, and set the zi*
explicitly, so enable the related instructions.
* testsuite/gas/riscv/march-imply-i2p0.d: Removed.
* testsuite/gas/riscv/march-imply-i2p1.d: Removed.
include/
* opcode/riscv.h: Add INSN_CLASS_ZICSR and INSN_CLASS_ZIFENCEI.
opcodes/
* riscv-opc.c (riscv_opcodes): Control fence.i and csr instructions by
zifencei and zicsr.
|
|
binutils * objcopy.c (is_mergeable_note_section): Remove reference to
SHF_GNU_BUILD_NOTE.
include * elf/common.h (SHF_GNU_BUILD_NOTE): Delete.
|
|
G is a special case, consider the ISA spec github issue as follows,
https://github.com/riscv/riscv-isa-manual/issues/575
My understand is that - i, m, a, f and d extensions are not g's implicit
extensions, they are g's expansions. The zifencei is the implicit extension
of g, and so is zicsr, since it is implicited by f (or i2p1). However,
we add the g with the RISCV_UNKNOWN_VERSION to the subset list, and it
will not output to the arch string, it is only used to check what implicit
extensions are need to be added.
bfd/
* elfxx-riscv.c (riscv_parse_add_subset): Allow to add g with
RISCV_UNKNOWN_VERSION versions.
(riscv_parse_std_ext): Add g to the subset list, we only use it
to add the implicit extensions, but won't output it to arch string.
(riscv_parse_add_implicit_subsets): Add implicit zicsr and zifencei
for g extension.
(riscv_arch_str1): Do not output g to the arch string.
* elfxx-riscv.h (RISCV_UNKNOWN_VERSION): Moved to include/opcode/riscv.h.
gas/
* testsuite/gas/riscv/attribute-10.d: Updated.
* testsuite/gas/riscv/march-imply-g.d: New testcase for g.
* testsuite/gas/riscv/march-imply-unsupported.d: The zicsr and zifencei
are not supported in the ISA spec v2.2, so don't add and output them.
include/
* opcode/riscv.h (RISCV_UNKNOWN_VERSION): added.
|
|
Keep the riscv_add_subset to do the same thing, and use a new
function, riscv_parse_add_subset, to cover most of the things
when parsing, including find the default versions for extensions,
and check whether the versions are valid. The version 0p0 should
be an invalid version, that is the mistake I made before. This
patch clarify the version rules as follows,
* We accept any version of extensions set by users, except 0p0.
* The non-standard x extensions must be set with versions in arch string.
* If user don't set the versions, or set 0p0 for the extensions, then try
to find the supported versions according to the chosen ISA spec.
Otherwise, report errors rather than output 0p0 for them.
Besides, we use as_bad rather than as_fatal to report more errors
for assembler.
bfd/
* elfxx-riscv.c (riscv_lookup_subset): Moved to front.
(riscv_add_subset): Likewise.
(riscv_release_subset_list): Likewise.
(riscv_parse_add_subset): New function. Find and check the
versions before adding them by riscv_add_subset.
(riscv_parsing_subset_version): Remove use_default_version
and change the version type from unsigned to int. Set the
versions to RISCV_UNKNOWN_VERSION if we can not find them
in the arch string.
(riscv_parse_std_ext): Updated.
(riscv_parse_prefixed_ext): Updated. Since we use as_bad
rather than as_fatal to report more errors, return NULL
string if the parsed end_of_version is NULL, too.
(riscv_parse_subset): Use a new boolean, no_conflict, to
report more errors when we have more than one ISA conflicts.
* elfxx-riscv.h (RISCV_DONT_CARE_VERSION): Changed to
RISCV_UNKNOWN_VERSION.
(riscv_lookup_subset_version): Removed.
(riscv_parse_subset_t): Updated.
gas/
* config/tc-riscv.c (riscv_get_default_ext_version):
Change the version type from unsigned to int.
(riscv_set_arch): Use as_bad rather than as_fatal to
report more errors.
* testsuite/gas/riscv/attribute-02.d: Updated since x must be
set with versions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/march-ok-two-nse.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: zicsr wasn't supported
in the spec 2.2, so choose the newer spec.
* testsuite/gas/riscv/march-fail-base-01.l: Updated since as_bad.
* testsuite/gas/riscv/march-fail-base-02.l: Likewise.
* testsuite/gas/riscv/march-fail-order-std.l: Likewise.
* testsuite/gas/riscv/march-fail-order-x.l: Likewise.
* testsuite/gas/riscv/march-fail-order-z.l: Likewise.
* testsuite/gas/riscv/march-fail-porder.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32ef.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32id.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32iq.l: Likewise.
* testsuite/gas/riscv/march-fail-rv64iq.l: Likewise.
* testsuite/gas/riscv/march-fail-single-char.l: Likewise.
* testsuite/gas/riscv/march-fail-unknown-std.l: Likewise.
* testsuite/gas/riscv/march-fail-unknown.l: Likewise.
* testsuite/gas/riscv/march-fail-uppercase.l: Likewise.
* testsuite/gas/riscv/march-fail-version.l: Likewise.
* testsuite/gas/riscv/march-fail-isa-spec.d: Likewise.
* testsuite/gas/riscv/march-fail-isa-spec.l: Likewise.
include/
* opcode/riscv.h (riscv_ext_version):
Change the version type from unsigned to int.
|
|
The CTF symbol lookup machinery added recently has one deficit: it
assumes the symtab is in the machine's native endianness. This is
always true when the linker is writing out symtabs (because cross
linkers byteswap symbols only after libctf has been called on them), but
may be untrue in the cross case when the linker or another tool
(objdump, etc) is reading them.
Unfortunately the easy way to model this to the caller, as an endianness
field in the ctf_sect_t, is precluded because doing so would change the
size of the ctf_sect_t, which would be an ABI break. So, instead, allow
the endianness of the symtab to be set after open time, by calling one
of the two new API functions ctf_symsect_endianness (for ctf_dict_t's)
or ctf_arc_symsect_endianness (for entire ctf_archive_t's). libctf
calls these functions automatically for objects opened via any of the
BFD-aware mechanisms (ctf_bfdopen, ctf_bfdopen_ctfsect, ctf_fdopen,
ctf_open, or ctf_arc_open), but the various mechanisms that just take
raw ctf_sect_t's will assume the symtab is in native endianness and need
a later call to ctf_*symsect_endianness to adjust it if needed. (This
call is basically free if the endianness is actually native: it only
costs anything if the symtab endianness was previously guessed wrong,
and there is a symtab, and we are using it directly rather than using
symtab indexing.)
Obviously, calling ctf_lookup_by_symbol or ctf_symbol_next before the
symtab endianness is correctly set will probably give wrong answers --
but you can set it at any time as long as it is before then.
include/ChangeLog
2020-11-23 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h: Style nit: remove () on function names in comments.
(ctf_sect_t): Mention endianness concerns.
(ctf_symsect_endianness): New declaration.
(ctf_arc_symsect_endianness): Likewise.
libctf/ChangeLog
2020-11-23 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (ctf_dict_t) <ctf_symtab_little_endian>: New.
(struct ctf_archive_internal) <ctfi_symsect_little_endian>: Likewise.
* ctf-create.c (ctf_serialize): Adjust for new field.
* ctf-open.c (init_symtab): Note the semantics of repeated calls.
(ctf_symsect_endianness): New.
(ctf_bufopen_internal): Set ctf_symtab_little_endian suitably for
the native endianness.
(_Static_assert): Moved...
(swap_thing): ... with this...
* swap.h: ... to here.
* ctf-util.c (ctf_elf32_to_link_sym): Use it, byteswapping the
Elf32_Sym if the ctf_symtab_little_endian demands it.
(ctf_elf64_to_link_sym): Likewise swap the Elf64_Sym if needed.
* ctf-archive.c (ctf_arc_symsect_endianness): New, set the
endianness of the symtab used by the dicts in an archive.
(ctf_archive_iter_internal): Initialize to unknown (assumed native,
do not call ctf_symsect_endianness).
(ctf_dict_open_by_offset): Call ctf_symsect_endianness if need be.
(ctf_dict_open_internal): Propagate the endianness down.
(ctf_dict_open_sections): Likewise.
* ctf-open-bfd.c (ctf_bfdopen_ctfsect): Get the endianness from the
struct bfd and pass it down to the archive.
* libctf.ver: Add ctf_symsect_endianness and
ctf_arc_symsect_endianness.
|
|
libctf has long provided ctf_getdatasect, which hands back a pointer to
the CTF section a (read-only) dict came from. But it has no such
functions to return pointers to the ELF symbol table or string table
it's working from, which is unfortunate because several libctf functions
(ctf_open, ctf_fdopen, and ctf_bfdopen) figure out which string and
symbol table to use themselves, and don't tell the user what they
decided, so the caller can't agree on which symtab to use with libctf
even if it wanted to.
Add a pair of functions to return the symtab and strtab in use. Like
ctf_getdatasect, these return ctf_sect_t structures by value, filled
with all-NULL/0 content if a symtab or strtab is not being used.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_getsymsect): New.
(ctf_getstrsect): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-open.c (ctf_getsymsect): New.
(ctf_getstrsect): Likewise.
* libctf.ver: Add them.
|
|
CTF archives may contain multiple dicts, each of which contain many
types and possibly a bunch of symtypetab entries relating to those
types: each symtypetab entry is going to appear in exactly one dict,
with the corresponding entries in the other dicts empty (either pads, or
indexed symtypetabs that do not mention that symbol). But users of
libctf usually want to get back the type associated with a symbol
without having to dig around to find out which dict that type might be
in.
This adds machinery to do that -- and since you probably want to do it
repeatedly, it adds internal caching to the ctf-archive machinery so
that iteration over archives via ctf_archive_next and repeated symbol
lookups do not have to repeatedly reopen the archive. (Iteration using
ctf_archive_iter will gain caching soon.)
Two new API functions:
ctf_dict_t *
ctf_arc_lookup_symbol (ctf_archive_t *arc, unsigned long symidx,
ctf_id_t *typep, int *errp);
This looks up the symbol with index SYMIDX in the archive ARC, returning
the dictionary in which it resides and optionally the type index as
well. Errors are returned in ERRP. The dict should be
ctf_dict_close()d when done, but is also cached inside the ctf_archive
so that the open cost is only paid once. The result of the symbol
lookup is also cached internally, so repeated lookups of the same symbol
are nearly free.
void ctf_arc_flush_caches (ctf_archive_t *arc);
Flush all the caches. Done at close time, but also available as an API
function if users want to do it by hand.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_arc_lookup_symbol): New.
(ctf_arc_flush_caches): Likewise.
* ctf.h: Document new auto-ctf_import behaviour.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (struct ctf_archive_internal) <ctfi_dicts>: New, dicts
the archive machinery has opened and cached.
<ctfi_symdicts>: New, cache of dicts containing symbols looked up.
<ctfi_syms>: New, cache of types of symbols looked up.
* ctf-archive.c (ctf_arc_close): Free them on close.
(enosym): New, flag entry for 'symbol not present'.
(ctf_arc_import_parent): New, automatically import the parent from
".ctf" if this is a child in an archive and ".ctf" is present.
(ctf_dict_open_sections): Use it.
(ctf_archive_iter_internal): Likewise.
(ctf_cached_dict_close): New, thunk around ctf_dict_close.
(ctf_dict_open_cached): New, open and cache a dict.
(ctf_arc_flush_caches): New, flush the caches.
(ctf_arc_lookup_symbol): New, look up a symbol in (all members of)
an archive, and cache the lookup.
(ctf_archive_iter): Note the new caching behaviour.
(ctf_archive_next): Use ctf_dict_open_cached.
* libctf.ver: Add ctf_arc_lookup_symbol and ctf_arc_flush_caches.
|
|
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
|
|
This is embarrassing.
The whole point of CTF is that it remains intact even after a binary is
stripped, providing a compact mapping from symbols to types for
everything in the externally-visible interface of an ELF object: it has
connections to the symbol table for that purpose, and to the string
table to avoid duplicating symbol names. So it's a shame that the hooks
I implemented last year served to hook it up to the .symtab and .strtab,
which obviously disappear on strip, leaving any accompanying the CTF
dict containing references to strings (and, soon, symbols) which don't
exist any more because their containing strtab has been vaporized. The
original Solaris design used .dynsym and .dynstr (well, actually,
.ldynsym, which has more symbols) which do not disappear. So should we.
Thankfully the work we did before serves as guide rails, and adjusting
things to use the .dynstr and .dynsym was fast and easy. The only
annoyance is that the dynsym is assembled inside elflink.c in a fairly
piecemeal fashion, so that the easiest way to get the symbols out was to
hook in before every call to swap_symbol_out (we also leave in a hook in
front of symbol additions to the .symtab because it seems plausible that
we might want to hook them in future too: for now that hook is unused).
We adjust things so that rather than being offered a whole hash table of
symbols at once, libctf is now given symbols one at a time, with st_name
indexes already resolved and pointing at their final .dynstr offsets:
it's now up to libctf to resolve these to names as needed using the
strtab info we pass it separately.
Some bits might be contentious. The ctf_new_dynstr callback takes an
elf_internal_sym, and this remains an elf_internal_sym right down
through the generic emulation layers into ldelfgen. This is no worse
than the elf_sym_strtab we used to pass down, but in the future when we
gain non-ELF CTF symtab support we might want to lower the
elf_internal_sym to some other representation (perhaps a
ctf_link_symbol) in bfd or in ldlang_ctf_new_dynsym. We rename the
'apply_strsym' hooks to 'acquire_strings' instead, becuse they no longer
have anything to do with symbols.
There are some API changes to pieces of API which are technically public
but actually totally unused by anything and/or unused by anything but ld
so they can change freely: the ctf_link_symbol gains new fields to allow
symbol names to be given as strtab offsets as well as strings, and a
symidx so that the symbol index can be passed in. ctf_link_shuffle_syms
loses its callback parameter: the idea now is that linkers call the new
ctf_link_add_linker_symbol for every symbol in .dynsym, feed in all the
strtab entries with ctf_link_add_strtab, and then a call to
ctf_link_shuffle_syms will apply both and arrange to use them to reorder
the CTF symtab at CTF serialization time (which is coming in the next
commit).
Inside libctf we have a new preamble flag CTF_F_DYNSTR which is always
set in v3-format CTF dicts from this commit forwards: CTF dicts without
this flag are associated with .strtab like they used to be, so that old
dicts' external strings don't turn to garbage when loaded by new libctf.
Dicts with this flag are associated with .dynstr and .dynsym instead.
(The flag is not the next in sequence because this commit was written
quite late: the missing flags will be filled in by the next commit.)
Tests forthcoming in a later commit in this series.
bfd/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* elflink.c (elf_finalize_dynstr): Call examine_strtab after
dynstr finalization.
(elf_link_swap_symbols_out): Don't call it here. Call
ctf_new_symbol before swap_symbol_out.
(elf_link_output_extsym): Call ctf_new_dynsym before
swap_symbol_out.
(bfd_elf_final_link): Likewise.
* elf.c (swap_out_syms): Pass in bfd_link_info. Call
ctf_new_symbol before swap_symbol_out.
(_bfd_elf_compute_section_file_positions): Adjust.
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* readelf.c (dump_section_as_ctf): Use .dynsym and .dynstr, not
.symtab and .strtab.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* bfdlink.h (struct elf_sym_strtab): Replace with...
(struct elf_internal_sym): ... this.
(struct bfd_link_callbacks) <examine_strtab>: Take only a
symstrtab argument.
<ctf_new_symbol>: New.
<ctf_new_dynsym>: Likewise.
* ctf-api.h (struct ctf_link_sym) <st_symidx>: New.
<st_nameidx>: Likewise.
<st_nameidx_set>: Likewise.
(ctf_link_iter_symbol_f): Removed.
(ctf_link_shuffle_syms): Remove most parameters, just takes a
ctf_dict_t now.
(ctf_link_add_linker_symbol): New, split from
ctf_link_shuffle_syms.
* ctf.h (CTF_F_DYNSTR): New.
(CTF_F_MAX): Adjust.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldelfgen.c (struct ctf_strsym_iter_cb_arg): Rename to...
(struct ctf_strtab_iter_cb_arg): ... this, changing fields:
<syms>: Remove.
<symcount>: Remove.
<symstrtab>: Rename to...
<strtab>: ... this.
(ldelf_ctf_strtab_iter_cb): Adjust.
(ldelf_ctf_symbols_iter_cb): Remove.
(ldelf_new_dynsym_for_ctf): New, tell libctf about a single
symbol.
(ldelf_examine_strtab_for_ctf): Rename to...
(ldelf_acquire_strings_for_ctf): ... this, only doing the strtab
portion and not symbols.
* ldelfgen.h: Adjust declarations accordingly.
* ldemul.c (ldemul_examine_strtab_for_ctf): Rename to...
(ldemul_acquire_strings_for_ctf): ... this.
(ldemul_new_dynsym_for_ctf): New.
* ldemul.h: Adjust declarations accordingly.
* ldlang.c (ldlang_ctf_apply_strsym): Rename to...
(ldlang_ctf_acquire_strings): ... this.
(ldlang_ctf_new_dynsym): New.
(lang_write_ctf): Call ldemul_new_dynsym_for_ctf with NULL to do
the actual symbol shuffle.
* ldlang.h (struct elf_strtab_hash): Adjust accordingly.
* ldmain.c (bfd_link_callbacks): Wire up new/renamed callbacks.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-link.c (ctf_link_shuffle_syms): Adjust.
(ctf_link_add_linker_symbol): New, unimplemented stub.
* libctf.ver: Add it.
* ctf-create.c (ctf_serialize): Set CTF_F_DYNSTR on newly-serialized
dicts.
* ctf-open-bfd.c (ctf_bfdopen_ctfsect): Check for the flag: open the
symtab/strtab if not present, dynsym/dynstr otherwise.
* ctf-archive.c (ctf_arc_bufpreamble): New, get the preamble from
some arbitrary member of a CTF archive.
* ctf-impl.h (ctf_arc_bufpreamble): Declare it.
|
|
The functions that return ctf_dict_t's given a ctf_archive_t and a name
are very clumsily named. It sounds like they return *archives*, not
dictionaries, and the names are very long and clunky. Why do we
have a ctf_arc_open_by_name when it opens a dictionary, not an archive,
and when there is no way to open a dictionary in any other way? The
answer is purely internal: the function is located in ctf-archive.c,
and everything in there was called ctf_arc_*, and there is another
way to open a dict (by offset in the archive), that is internal to
ctf-archive.c and that nothing else can call.
This is clearly bad naming. The internal organization of the source tree
should not dictate public API names!
So rename things (keeping the old, bad names for compatibility), and
adjust all users. You now open a dict using ctf_dict_open, and
open it giving ELF sections via ctf_dict_open_sections.
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf): Use ctf_dict_open, not
ctf_arc_open_by_name.
* readelf.c (dump_section_as_ctf): Likewise.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c (elfctf_build_psymtabs): Use ctf_dict_open, not
ctf_arc_open_by_name.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_arc_open_by_name): Rename to...
(ctf_dict_open): ... this, keeping compatibility function.
(ctf_arc_open_by_name_sections): Rename to...
(ctf_dict_open_sections): ... this, keeping compatibility function.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-archive.c (ctf_arc_open_by_offset): Rename to...
(ctf_dict_open_by_offset): ... this. Adjust callers.
(ctf_arc_open_by_name_internal): Rename to...
(ctf_dict_open_internal): ... this. Adjust callers.
(ctf_arc_open_by_name_sections): Rename to...
(ctf_dict_open_sections): ... this, keeping compatibility function.
(ctf_arc_open_by_name): Rename to...
(ctf_dict_open): ... this, keeping compatibility function.
* libctf.ver: New functions added.
* ctf-link.c (ctf_link_one_input_archive): Adjusted accordingly.
(ctf_link_deduplicating_open_inputs): Likewise.
|
|
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
|
