aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2018-07-02GDB PR tdep/8282: MIPS: Wire in `set disassembler-options'Maciej W. Rozycki2-6/+54
Implement MIPS target support for passing options to the disassembler, complementing commit 65b48a81404c ("GDB: Add support for the new set/show disassembler-options commands."). This includes options that expect an argument, so adjust the generic code and data structures used so as to handle such options. So as to give backends syntax flexibility no specific delimiter has been defined to separate options from their respective arguments, so it has to be included as the last character of the option name. Completion code however has not been adjusted and consequently option arguments cannot be completed at this time. Also the MIPS target has non-empty defaults for the options, so that ABI names for the general-purpose registers respect our `set mips abi ...' setting rather than always being determined from the ELF headers of the binary file selected. Handle these defaults as implicit options, never shown to the user and always prepended to the user-specified options, so that the latters can override the defaults. The resulting output for the MIPS target is as follows: (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: no-aliases Use canonical instruction forms. msa Recognize MSA instructions. virt Recognize the virtualization ASE instructions. xpa Recognize the eXtended Physical Address (XPA) ASE instructions. ginv Recognize the Global INValidate (GINV) ASE instructions. gpr-names=ABI Print GPR names according to specified ABI. Default: based on binary being disassembled. fpr-names=ABI Print FPR names according to specified ABI. Default: numeric. cp0-names=ARCH Print CP0 register names according to specified architecture. Default: based on binary being disassembled. hwr-names=ARCH Print HWR names according to specified architecture. Default: based on binary being disassembled. reg-names=ABI Print GPR and FPR names according to specified ABI. reg-names=ARCH Print CP0 register and HWR names according to specified architecture. For the options above, the following values are supported for "ABI": numeric 32 n32 64 For the options above, the following values are supported for "ARCH": numeric r3000 r3900 r4000 r4010 vr4100 vr4111 vr4120 r4300 r4400 r4600 r4650 r5000 vr5400 vr5500 r5900 r6000 rm7000 rm9000 r8000 r10000 r12000 r14000 r16000 mips5 mips32 mips32r2 mips32r3 mips32r5 mips32r6 mips64 mips64r2 mips64r3 mips64r5 mips64r6 interaptiv-mr2 sb1 loongson2e loongson2f loongson3a octeon octeon+ octeon2 octeon3 xlr xlp (gdb) which corresponds to what `objdump --help' used to print for the MIPS target, with minor formatting changes, most notably option argument lists being wrapped, but also the amount of white space separating options from the respective descriptions. The relevant part the new code is now also used by `objdump --help', which means these formatting changes apply to both outputs, except for argument list wrapping, which is GDB-specific. This also adds a separating new line between the heading and option lists where descriptions are provided, hence: (gdb) set architecture s390:31-bit (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: esa Disassemble in ESA architecture mode zarch Disassemble in z/Architecture mode insnlength Print unknown instructions according to length from first two bits (gdb) but: (gdb) set architecture powerpc:common (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: 403, 405, 440, 464, 476, 601, 603, 604, 620, 7400, 7410, 7450, 7455, 750cl, 821, 850, 860, a2, altivec, any, booke, booke32, cell, com, e200z4, e300, e500, e500mc, e500mc64, e5500, e6500, e500x2, efs, efs2, power4, power5, power6, power7, power8, power9, ppc, ppc32, 32, ppc64, 64, ppc64bridge, ppcps, pwr, pwr2, pwr4, pwr5, pwr5x, pwr6, pwr7, pwr8, pwr9, pwrx, raw, spe, spe2, titan, vle, vsx (gdb) Existing affected target backends have been adjusted accordingly. This has been verified manually with: (gdb) set architecture arm (gdb) set architecture powerpc:common (gdb) set architecture s390:31-bit to cause no issues with the `show disassembler-options' and `set disassembler-options' commands. A test case for the MIPS target has also been provided, covering the default settings with ABI overrides as well as disassembler option overrides. 2018-07-02 Maciej W. Rozycki <macro@mips.com> Simon Marchi <simon.marchi@polymtl.ca> include/ PR tdep/8282 * dis-asm.h (disasm_option_arg_t): New typedef. (disasm_options_and_args_t): Likewise. (disasm_options_t): Add `arg' member, document members. (disassembler_options_mips): New prototype. (disassembler_options_arm, disassembler_options_powerpc) (disassembler_options_s390): Update prototypes. opcodes/ PR tdep/8282 * mips-dis.c (mips_option_arg_t): New enumeration. (mips_options): New variable. (disassembler_options_mips): New function. (print_mips_disassembler_options): Reimplement in terms of `disassembler_options_mips'. * arm-dis.c (disassembler_options_arm): Adapt to using the `disasm_options_and_args_t' structure. * ppc-dis.c (disassembler_options_powerpc): Likewise. * s390-dis.c (disassembler_options_s390): Likewise. gdb/ PR tdep/8282 * disasm.h (gdb_disassembler): Add `m_disassembler_options_holder'. member * disasm.c (get_all_disassembler_options): New function. (gdb_disassembler::gdb_disassembler): Use it. (gdb_buffered_insn_length_init_dis): Likewise. (gdb_buffered_insn_length): Adjust accordingly. (set_disassembler_options): Handle options with arguments. (show_disassembler_options_sfunc): Likewise. Add a leading new line if showing options with descriptions. (disassembler_options_completer): Adapt to using the `disasm_options_and_args_t' structure. * mips-tdep.c (mips_disassembler_options): New variable. (mips_disassembler_options_o32): Likewise. (mips_disassembler_options_n32): Likewise. (mips_disassembler_options_n64): Likewise. (gdb_print_insn_mips): Don't set `disassembler_options'. (gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove functions. (mips_gdbarch_init): Always set `gdbarch_print_insn' to `gdb_print_insn_mips'. Set `gdbarch_disassembler_options', `gdbarch_disassembler_options_implicit' and `gdbarch_valid_disassembler_options'. * arm-tdep.c (_initialize_arm_tdep): Adapt to using the `disasm_options_and_args_t' structure. * gdbarch.sh (disassembler_options_implicit): New `gdbarch' method. (valid_disassembler_options): Switch from `disasm_options_t' to the `disasm_options_and_args_t' structure. * NEWS: Document `set disassembler-options' support for the MIPS target. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. gdb/doc/ PR tdep/8282 * gdb.texinfo (Source and Machine Code): Document `set disassembler-options' support for the MIPS target. gdb/testsuite/ PR tdep/8282 * gdb.arch/mips-disassembler-options.exp: New test. * gdb.arch/mips-disassembler-options.s: New test source.
2018-06-29Fix AArch64 encodings for by element instructions.Tamar Christina2-0/+7
Some instructions in Armv8-a place a limitation on FP16 registers that can be used as the register from which to select an element from. e.g. fmla restricts Rm to 4 bits when using an FP16 register. This restriction does not apply for all instructions, e.g. fcmla does not have this restriction as it gets an extra bit from the M field. Unfortunately, this restriction to S_H was added for all _Em operands before, meaning for a large number of instructions you couldn't use the full register file. This fixes the issue by introducing a new operand _Em16 which applies this restriction only when paired with S_H and leaves the _Em and the other qualifiers for _Em16 unbounded (i.e. using the full 5 bit range). Also the patch updates all instructions that should be affected by this. opcodes/ PR binutils/23192 * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. * aarch64-dis.c (aarch64_ext_reglane): Add AARCH64_OPND_Em16 constraint. * aarch64-opc.c (operand_general_constraint_met_p, aarch64_print_operand): Likewise. * aarch64-tbl.h (aarch64_opcode_table): Change Em to Em16 for smlal, smlal2, fmla, fmls, fmul, fmulx, sqrdmlah, sqrdlsh, fmlal, fmlsl, fmlal2, fmlsl2. (AARCH64_OPERANDS): Add Em2. gas/ PR binutils/23192 * config/tc-aarch64.c (process_omitted_operand, parse_operands): Add AARCH64_OPND_Em16 * testsuite/gas/aarch64/advsimd-armv8_3.s: Expand tests to cover upper 16 registers. * testsuite/gas/aarch64/advsimd-armv8_3.d: Likewise. * testsuite/gas/aarch64/advsimd-compnum.s: Likewise. * testsuite/gas/aarch64/advsimd-compnum.d: Likewise. * testsuite/gas/aarch64/sve.d: Likewise. include/ PR binutils/23192 *opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_Em16.
2018-06-26Revert "Use offsets instead of addresses in ELF_SECTION_IN_SEGMENT for non ↵Alan Modra2-3/+5
SHT_NOBITS" This reverts commit 57c0d77c2ce5e583dab322e05f8291bcbad0ccd3.
2018-06-24Add 2.30 branch notes to ChangeLogs and NEWS files.Nick Clifton1-0/+4
2018-06-21Use offsets instead of addresses in ELF_SECTION_IN_SEGMENT for non SHT_NOBITSAlan Hayward2-1/+8
For sections that are not SHT_NOBITS, use sh_offset and p_offset instead of sh_addr and p_vaddr when calculating if a section fits in a segment. Both methods are valid when using the GNU linker. include/ * elf/internal.h (ELF_SECTION_IN_SEGMENT): Don’t check addresses for non SHT_NOBITS.
2018-06-19include: Sync with GCCSimon Marchi3-0/+72
Bring changes from GCC in shared headers. include/ChangeLog: Sync with GCC 2018-05-24 Tom Rix <trix@juniper.net> * dwarf2.def (DW_FORM_strx*, DW_FORM_addrx*): New. 2017-11-20 Kito Cheng <kito.cheng@gmail.com> * longlong.h [__riscv] (__umulsidi3): Define. [__riscv] (umul_ppmm): Likewise. [__riscv] (__muluw3): Likewise.
2018-06-18libiberty: Sync with GCCSimon Marchi1-1/+4
Also sync include/simple-object.h, which goes together with the change in libiberty.
2018-06-14MIPS: Add Global INValidate ASE supportFaraz Shahbazker3-2/+16
Add support for the Global INValidate Application Specific Extension for Release 6 of the MIPS Architecture. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 187-191 bfd/ * elfxx-mips.c (print_mips_ases): Add GINV extension. binutils/ * readelf.c (print_mips_ases): Add GINV extension. gas/ * NEWS: Mention MIPS Global INValidate ASE support. * config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV. (md_longopts): Likewise. (mips_ases): Define availability for GINV. (mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV. (md_show_usage): Add help for -mginv and -mno-ginv. * doc/as.texinfo: Document -mginv, -mno-ginv. * doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and .set noginv. * testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV ASE. * testsuite/gas/mips/ase-errors-2.s: Likewise. * testsuite/gas/mips/ase-errors-1.l: Likewise. * testsuite/gas/mips/ase-errors-2.l: Likewise. * testsuite/gas/mips/ginv.d: New test. * testsuite/gas/mips/ginv-err.d: New test. * testsuite/gas/mips/ginv-err.l: New test stderr output. * testsuite/gas/mips/ginv.s: New test source. * testsuite/gas/mips/ginv-err.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. include/ * elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros. (AFL_ASE_MASK): Update to include AFL_ASE_GINV. * opcode/mips.h: Document "+\" operand format. (ASE_GINV): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and mips64r6 descriptors. (parse_mips_ase_option): Handle -Mginv option. (print_mips_disassembler_options): Document -Mginv. * mips-opc.c (decode_mips_operand) <+\>: New operand format. (GINV): New macro. (mips_opcodes): Define ginvi and ginvt.
2018-06-13MIPS: Add CRC ASE supportScott Egerton3-1/+13
Add support for the CRC Application Specific Extension for Release 6 of the MIPS Architecture. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 143-148 [2] "MIPS Architecture for Programmers Volume II-A: The MIPS64 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 165-170 ChangeLog: bfd/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * elfxx-mips.c (print_mips_ases): Add CRC. binutils/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * readelf.c (print_mips_ases): Add CRC. gas/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> Maciej W. Rozycki <macro@mips.com> * config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC. (md_longopts): Likewise. (md_show_usage): Add help for -mcrc and -mno-crc. (mips_ases): Define availability for CRC and CRC64. (mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC. * doc/as.texinfo: Document -mcrc, -mno-crc. * doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and .set no-crc. * testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC ASE. * testsuite/gas/mips/ase-errors-2.l: Likewise. * testsuite/gas/mips/ase-errors-1.s: Likewise. * testsuite/gas/mips/ase-errors-2.s: Likewise. * testsuite/gas/mips/crc.d: New test. * testsuite/gas/mips/crc64.d: New test. * testsuite/gas/mips/crc-err.d: New test. * testsuite/gas/mips/crc64-err.d: New test. * testsuite/gas/mips/crc-err.l: New test stderr output. * testsuite/gas/mips/crc64-err.l: New test stderr output. * testsuite/gas/mips/crc.s: New test source. * testsuite/gas/mips/crc64.s: New test source. * testsuite/gas/mips/crc-err.s: New test source. * testsuite/gas/mips/crc64-err.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. include/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * elf/mips.h (AFL_ASE_CRC): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_CRC. * opcode/mips.h (ASE_CRC): New macro. * opcode/mips.h (ASE_CRC64): Likewise. opcodes/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs. * mips-opc.c (CRC, CRC64): New macros. (mips_builtin_opcodes): Define crc32b, crc32h, crc32w, crc32cb, crc32ch and crc32cw for CRC. Define crc32d and crc32cd for CRC64.
2018-06-04xtensa: use property tables for correct disassemblyMax Filippov2-0/+13
xtensa disassembler does not use information from the .xt.prop sections to switch between code/data disassembly in text sections. This may result in incorrect disassembly when data is interpreted as code and disassembler loses synchronization with instruction stream. Use .xt.prop section information to correctly interpret code and data and synchronize with instruction stream. 2018-06-04 Max Filippov <jcmvbkbc@gmail.com> bfd/ * elf32-xtensa.c (xtensa_read_table_entries): Make global. (compute_fill_extra_space): Drop declaration. Rename function to xtensa_compute_fill_extra_space. (compute_ebb_actions, remove_dead_literal): Update references to compute_fill_extra_space. include/ * elf/xtensa.h (xtensa_read_table_entries) (xtensa_compute_fill_extra_space): New declarations. opcodes/ * xtensa-dis.c (bfd.h, elf/xtensa.h): New includes. (dis_private): Add new fields for property section tracking. (xtensa_coalesce_insn_tables, xtensa_find_table_entry) (xtensa_instruction_fits): New functions. (fetch_data): Bump minimal fetch size to 4. (print_insn_xtensa): Make struct dis_private static. Load and prepare property table on section change. Don't disassemble literals. Don't disassemble instructions that cross property table boundaries.
2018-06-04Use DIAGNOSTIC_IGNORE_STRINGOP_TRUNCATION to silence GCC 8.1H.J. Lu2-3/+6
GCC 8.1 warns about destination size with -Wstringop-truncation: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85643 Use DIAGNOSTIC_IGNORE_STRINGOP_TRUNCATION to silence it. bfd/ PR binutils/23146 * bfd-in.h: Include "diagnostics.h". * bfd-in2.h: Regenerated. * elf32-arm.c (elf32_arm_nabi_write_core_note): Use DIAGNOSTIC_PUSH, DIAGNOSTIC_IGNORE_STRINGOP_TRUNCATION and DIAGNOSTIC_POP to silence GCC 8.1 warnings with -Wstringop-truncation. * elf32-ppc.c (ppc_elf_write_core_note): Likewse. * elf32-s390.c (elf_s390_write_core_note): Likewse. * elf64-ppc.c (ppc64_elf_write_core_note): Likewse. * elf64-s390.c (elf_s390_write_core_note): Likewse. * elfxx-aarch64.c (_bfd_aarch64_elf_write_core_note): Likewse. include/ * diagnostics.h (DIAGNOSTIC_IGNORE_STRINGOP_TRUNCATION): Always define for GCC.
2018-06-04Add DIAGNOSTIC_IGNORE_STRINGOP_TRUNCATIONH.J. Lu2-7/+35
Add DIAGNOSTIC_IGNORE_STRINGOP_TRUNCATION for GCC 8.1 to silence -Wstringop-truncation warning: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85643 * diagnostics.h (DIAGNOSTIC_STRINGIFY_1): New. (DIAGNOSTIC_STRINGIFY): Likewise. (DIAGNOSTIC_IGNORE): Replace STRINGIFY with DIAGNOSTIC_STRINGIFY. (DIAGNOSTIC_IGNORE_SELF_MOVE): Define empty if not defined. (DIAGNOSTIC_IGNORE_DEPRECATED_REGISTER): Likewise. (DIAGNOSTIC_IGNORE_UNUSED_FUNCTION): Likewise. (DIAGNOSTIC_IGNORE_SWITCH_DIFFERENT_ENUM_TYPES): Likewise. (DIAGNOSTIC_IGNORE_STRINGOP_TRUNCATION): New.
2018-06-01Move gdb/common/diagnostics.h to include/diagnostics.hH.J. Lu2-0/+64
Move gdb/common/diagnostics.h to include/diagnostics.h so that it can be used in binutils. gdb/ * ada-lex.l: Include "diagnostics.h" instead of "common/diagnostics.h". * unittests/environ-selftests.c: Likewise. * common/diagnostics.h: Moved to ../include. include/ * diagnostics.h: Moved from ../gdb/common/diagnostics.h.
2018-05-31include: 2018-05-28 Bernd Edlinger <bernd.edlinger@hotmail.de>edlinger2-1/+8
include: * splay-tree.h (splay_tree_compare_strings, splay_tree_delete_pointers): Declare new utility functions. libiberty: 2018-05-28 Bernd Edlinger <bernd.edlinger@hotmail.de> * splay-tree.c (splay_tree_compare_strings, splay_tree_delete_pointers): New utility functions. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@260850 138bc75d-0d04-0410-961f-82ee72b054a4
2018-05-21Remove fake operand handling for extended mnemonics.Peter Bergner2-8/+4
opcodes/ * ppc-opc.c (insert_bat, extract_bat, insert_bba, extract_bba, insert_rbs, extract_rbs, insert_xb6s, extract_xb6s): Delete functions. (insert_bab, extract_bab, insert_btab, extract_btab, insert_rsb, extract_rsb, insert_xab6, extract_xab6): New functions. (BAT, BBA VBA RBS XB6S): Delete macros. (BTAB, BAB, VAB, RAB, RSB, XAB6): New macros. (BB, BD, RBX, XC6): Update for new macros. (powerpc_opcodes) <evmr, evnot, vmr, vnot, crnot, crclr, crset, crmove, not, not., mr, mr., xxspltd, xxswapd, xvmovsp, xvmovdp, e_crnot, e_crclr, e_crset, e_crmove>: Likewise. * ppc-dis.c (print_insn_powerpc): Delete handling of fake operands. include/ * opcode/ppc.h (PPC_OPERAND_FAKE): Delete macro. gas/ * config/tc-ppc.c (md_assemble): Delete handling of fake operands. * testsuite/gas/ppc/common.s (crmove, cror, or., or, nor., nor): Add test of extended mnemonics. * testsuite/gas/ppc/common.d: Likewise. Don't match instruction offset. * testsuite/gas/ppc/spe.s (evor, evnor): Add test of extended mnemonics. * testsuite/gas/ppc/spe.d: Likewise. Don't match instruction offset.
2018-05-18RISC-V: Add RV32E support.Jim Wilson2-0/+7
Kito Cheng <kito.cheng@gmail.com> Monk Chiang <sh.chiang04@gmail.com> bfd/ * elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Handle EF_RISCV_RVE. binutils/ * readelf.c (get_machine_flags): Handle EF_RISCV_RVE. gas/ * config/tc-riscv.c (rve_abi): New. (riscv_set_options): Add rve field. Initialize it. (riscv_set_rve) New function. (riscv_set_arch): Support 'e' ISA subset. (reg_lookup_internal): If rve, check register is available. (riscv_set_abi): New parameter rve. (md_parse_option): Pass new argument to riscv_set_abi. (riscv_after_parse_args): Call riscv_set_rve. If rve_abi, set EF_RISCV_RVE. * doc/c-riscv.texi (-mabi): Document new ilp32e argument. include/ * elf/riscv.h (EF_RISCV_RVE): New define.
2018-05-18Add support for the Freescale s12z processor.John Darrington2-0/+40
bfd * Makefile.am: Add s12z files. * Makefile.in: Regenerate. * archures.c: Add bfd_s12z_arch. * bfd-in.h: Add exports of bfd_putb24 and bfd_putl24. * bfd-in2.h: Regenerate. * config.bfd: Add s12z target. * configure.ac: Add s12z target. * configure: Regenerate. * cpu-s12z.c: New file. * elf32-s12z.c: New file. * libbfd.c (bfd_putb24): New function. (bfd_putl24): New function. * libbfd.h: Regenerate. * reloc.c: Add s12z relocations. (bfd_get_reloc_size): Handle size 5 relocs. * targets.c: Add s12z_elf32_vec. opcodes * Makefile.am: Add support for s12z architecture. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * s12z-dis.c: New file. * s12z.h: New file. include * elf/s12z.h: New header. ld * Makefile.am: Add support for s12z architecture. * configure.tgt: Likewise. * Makefile.in: Regenerate. * emulparams/m9s12zelf.sh: New file. * scripttempl/elfm9s12z.sc: New file. * testsuite/ld-discard/static.d: Expect to fail for the s12z target. * testsuite/ld-elf/endsym.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr14926.d: Skip for the s12z target. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-s12z: New directory. * testsuite/ld-s12z/opr-linking.d: New file. * testsuite/ld-s12z/opr-linking.s: New file. * testsuite/ld-s12z/relative-linking.d: New file. * testsuite/ld-s12z/relative-linking.s: New file. * testsuite/ld-s12z/z12s.exp: New file. gas * Makefile.am: Add support for s12z target. * Makefile.in: Regenerate. * NEWS: Mention the new support. * config/tc-s12z.c: New file. * config/tc-s12z.h: New file. * configure.tgt: Add s12z support. * doc/Makefile.am: Likewise. * doc/Makefile.in: Regenerate. * doc/all.texi: Add s12z documentation. * doc/as.textinfo: Likewise. * doc/c-s12z.texi: New file. * testsuite/gas/s12z: New directory. * testsuite/gas/s12z/abs.d: New file. * testsuite/gas/s12z/abs.s: New file. * testsuite/gas/s12z/adc-imm.d: New file. * testsuite/gas/s12z/adc-imm.s: New file. * testsuite/gas/s12z/adc-opr.d: New file. * testsuite/gas/s12z/adc-opr.s: New file. * testsuite/gas/s12z/add-imm.d: New file. * testsuite/gas/s12z/add-imm.s: New file. * testsuite/gas/s12z/add-opr.d: New file. * testsuite/gas/s12z/add-opr.s: New file. * testsuite/gas/s12z/and-imm.d: New file. * testsuite/gas/s12z/and-imm.s: New file. * testsuite/gas/s12z/and-opr.d: New file. * testsuite/gas/s12z/and-opr.s: New file. * testsuite/gas/s12z/and-or-cc.d: New file. * testsuite/gas/s12z/and-or-cc.s: New file. * testsuite/gas/s12z/bfext-special.d: New file. * testsuite/gas/s12z/bfext-special.s: New file. * testsuite/gas/s12z/bfext.d: New file. * testsuite/gas/s12z/bfext.s: New file. * testsuite/gas/s12z/bit-manip.d: New file. * testsuite/gas/s12z/bit-manip.s: New file. * testsuite/gas/s12z/bit.d: New file. * testsuite/gas/s12z/bit.s: New file. * testsuite/gas/s12z/bra-expression-defined.d: New file. * testsuite/gas/s12z/bra-expression-defined.s: New file. * testsuite/gas/s12z/bra-expression-undef.d: New file. * testsuite/gas/s12z/bra-expression-undef.s: New file. * testsuite/gas/s12z/bra.d: New file. * testsuite/gas/s12z/bra.s: New file. * testsuite/gas/s12z/brclr-symbols.d: New file. * testsuite/gas/s12z/brclr-symbols.s: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file. * testsuite/gas/s12z/clb.d: New file. * testsuite/gas/s12z/clb.s: New file. * testsuite/gas/s12z/clr-opr.d: New file. * testsuite/gas/s12z/clr-opr.s: New file. * testsuite/gas/s12z/clr.d: New file. * testsuite/gas/s12z/clr.s: New file. * testsuite/gas/s12z/cmp-imm.d: New file. * testsuite/gas/s12z/cmp-imm.s: New file. * testsuite/gas/s12z/cmp-opr-inc.d: New file. * testsuite/gas/s12z/cmp-opr-inc.s: New file. * testsuite/gas/s12z/cmp-opr-rdirect.d: New file. * testsuite/gas/s12z/cmp-opr-rdirect.s: New file. * testsuite/gas/s12z/cmp-opr-reg.d: New file. * testsuite/gas/s12z/cmp-opr-reg.s: New file. * testsuite/gas/s12z/cmp-opr-rindirect.d: New file. * testsuite/gas/s12z/cmp-opr-rindirect.s: New file. * testsuite/gas/s12z/cmp-opr-sxe4.d: New file. * testsuite/gas/s12z/cmp-opr-sxe4.s: New file. * testsuite/gas/s12z/cmp-opr-xys.d: New file. * testsuite/gas/s12z/cmp-opr-xys.s: New file. * testsuite/gas/s12z/cmp-s-imm.d: New file. * testsuite/gas/s12z/cmp-s-imm.s: New file. * testsuite/gas/s12z/cmp-s-opr.d: New file. * testsuite/gas/s12z/cmp-s-opr.s: New file. * testsuite/gas/s12z/cmp-xy.d: New file. * testsuite/gas/s12z/cmp-xy.s: New file. * testsuite/gas/s12z/com-opr.d: New file. * testsuite/gas/s12z/com-opr.s: New file. * testsuite/gas/s12z/complex-shifts.d: New file. * testsuite/gas/s12z/complex-shifts.s: New file. * testsuite/gas/s12z/db-tb-cc-opr.d: New file. * testsuite/gas/s12z/db-tb-cc-opr.s: New file. * testsuite/gas/s12z/db-tb-cc-reg.d: New file. * testsuite/gas/s12z/db-tb-cc-reg.s: New file. * testsuite/gas/s12z/dbCC.d: New file. * testsuite/gas/s12z/dbCC.s: New file. * testsuite/gas/s12z/dec-opr.d: New file. * testsuite/gas/s12z/dec-opr.s: New file. * testsuite/gas/s12z/dec.d: New file. * testsuite/gas/s12z/dec.s: New file. * testsuite/gas/s12z/div.d: New file. * testsuite/gas/s12z/div.s: New file. * testsuite/gas/s12z/eor.d: New file. * testsuite/gas/s12z/eor.s: New file. * testsuite/gas/s12z/exg.d: New file. * testsuite/gas/s12z/exg.s: New file. * testsuite/gas/s12z/ext24-ld-xy.d: New file. * testsuite/gas/s12z/ext24-ld-xy.s: New file. * testsuite/gas/s12z/inc-opr.d: New file. * testsuite/gas/s12z/inc-opr.s: New file. * testsuite/gas/s12z/inc.d: New file. * testsuite/gas/s12z/inc.s: New file. * testsuite/gas/s12z/inh.d: New file. * testsuite/gas/s12z/inh.s: New file. * testsuite/gas/s12z/jmp.d: New file. * testsuite/gas/s12z/jmp.s: New file. * testsuite/gas/s12z/jsr.d: New file. * testsuite/gas/s12z/jsr.s: New file. * testsuite/gas/s12z/ld-imm-page2.d: New file. * testsuite/gas/s12z/ld-imm-page2.s: New file. * testsuite/gas/s12z/ld-imm.d: New file. * testsuite/gas/s12z/ld-imm.s: New file. * testsuite/gas/s12z/ld-immu18.d: New file. * testsuite/gas/s12z/ld-immu18.s: New file. * testsuite/gas/s12z/ld-large-direct.d: New file. * testsuite/gas/s12z/ld-large-direct.s: New file. * testsuite/gas/s12z/ld-opr.d: New file. * testsuite/gas/s12z/ld-opr.s: New file. * testsuite/gas/s12z/ld-s-opr.d: New file. * testsuite/gas/s12z/ld-s-opr.s: New file. * testsuite/gas/s12z/ld-small-direct.d: New file. * testsuite/gas/s12z/ld-small-direct.s: New file. * testsuite/gas/s12z/lea-immu18.d: New file. * testsuite/gas/s12z/lea-immu18.s: New file. * testsuite/gas/s12z/lea.d: New file. * testsuite/gas/s12z/lea.s: New file. * testsuite/gas/s12z/mac.d: New file. * testsuite/gas/s12z/mac.s: New file. * testsuite/gas/s12z/min-max.d: New file. * testsuite/gas/s12z/min-max.s: New file. * testsuite/gas/s12z/mod.d: New file. * testsuite/gas/s12z/mod.s: New file. * testsuite/gas/s12z/mov.d: New file. * testsuite/gas/s12z/mov.s: New file. * testsuite/gas/s12z/mul-imm.d: New file. * testsuite/gas/s12z/mul-imm.s: New file. * testsuite/gas/s12z/mul-opr-opr.d: New file. * testsuite/gas/s12z/mul-opr-opr.s: New file. * testsuite/gas/s12z/mul-opr.d: New file. * testsuite/gas/s12z/mul-opr.s: New file. * testsuite/gas/s12z/mul-reg.d: New file. * testsuite/gas/s12z/mul-reg.s: New file. * testsuite/gas/s12z/mul.d: New file. * testsuite/gas/s12z/mul.s: New file. * testsuite/gas/s12z/neg-opr.d: New file. * testsuite/gas/s12z/neg-opr.s: New file. * testsuite/gas/s12z/not-so-simple-shifts.d: New file. * testsuite/gas/s12z/not-so-simple-shifts.s: New file. * testsuite/gas/s12z/opr-18u.d: New file. * testsuite/gas/s12z/opr-18u.s: New file. * testsuite/gas/s12z/opr-expr.d: New file. * testsuite/gas/s12z/opr-expr.s: New file. * testsuite/gas/s12z/opr-ext-18.d: New file. * testsuite/gas/s12z/opr-ext-18.s: New file. * testsuite/gas/s12z/opr-idx-24-reg.d: New file. * testsuite/gas/s12z/opr-idx-24-reg.s: New file. * testsuite/gas/s12z/opr-idx3-reg.d: New file. * testsuite/gas/s12z/opr-idx3-reg.s: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.d: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.s: New file. * testsuite/gas/s12z/opr-indirect-expr.d: New file. * testsuite/gas/s12z/opr-indirect-expr.s: New file. * testsuite/gas/s12z/opr-symbol.d: New file. * testsuite/gas/s12z/opr-symbol.s: New file. * testsuite/gas/s12z/or-imm.d: New file. * testsuite/gas/s12z/or-imm.s: New file. * testsuite/gas/s12z/or-opr.d: New file. * testsuite/gas/s12z/or-opr.s: New file. * testsuite/gas/s12z/p2-mul.d: New file. * testsuite/gas/s12z/p2-mul.s: New file. * testsuite/gas/s12z/page2-inh.d: New file. * testsuite/gas/s12z/page2-inh.s: New file. * testsuite/gas/s12z/psh-pul.d: New file. * testsuite/gas/s12z/psh-pul.s: New file. * testsuite/gas/s12z/qmul.d: New file. * testsuite/gas/s12z/qmul.s: New file. * testsuite/gas/s12z/rotate.d: New file. * testsuite/gas/s12z/rotate.s: New file. * testsuite/gas/s12z/s12z.exp: New file. * testsuite/gas/s12z/sat.d: New file. * testsuite/gas/s12z/sat.s: New file. * testsuite/gas/s12z/sbc-imm.d: New file. * testsuite/gas/s12z/sbc-imm.s: New file. * testsuite/gas/s12z/sbc-opr.d: New file. * testsuite/gas/s12z/sbc-opr.s: New file. * testsuite/gas/s12z/shift.d: New file. * testsuite/gas/s12z/shift.s: New file. * testsuite/gas/s12z/simple-shift.d: New file. * testsuite/gas/s12z/simple-shift.s: New file. * testsuite/gas/s12z/single-ops.d: New file. * testsuite/gas/s12z/single-ops.s: New file. * testsuite/gas/s12z/specd6.d: New file. * testsuite/gas/s12z/specd6.s: New file. * testsuite/gas/s12z/st-large-direct.d: New file. * testsuite/gas/s12z/st-large-direct.s: New file. * testsuite/gas/s12z/st-opr.d: New file. * testsuite/gas/s12z/st-opr.s: New file. * testsuite/gas/s12z/st-s-opr.d: New file. * testsuite/gas/s12z/st-s-opr.s: New file. * testsuite/gas/s12z/st-small-direct.d: New file. * testsuite/gas/s12z/st-small-direct.s: New file. * testsuite/gas/s12z/st-xy.d: New file. * testsuite/gas/s12z/st-xy.s: New file. * testsuite/gas/s12z/sub-imm.d: New file. * testsuite/gas/s12z/sub-imm.s: New file. * testsuite/gas/s12z/sub-opr.d: New file. * testsuite/gas/s12z/sub-opr.s: New file. * testsuite/gas/s12z/tfr.d: New file. * testsuite/gas/s12z/tfr.s: New file. * testsuite/gas/s12z/trap.d: New file. * testsuite/gas/s12z/trap.s: New file. binutils* readelf.c: Add support for s12z architecture. * testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z targets.
2018-05-15Implement Read/Write constraints on system registers on AArch64Tamar Christina2-1/+10
This patch adds constraints for read and write only system registers with the msr and mrs instructions. The code will treat having both flags set and none set as the same. These flags add constraints that must be matched up. e.g. a system register with a READ only flag set, can only be used with mrs. If The constraint fails a warning is emitted. Examples of the warnings generated: test.s: Assembler messages: test.s:5: Warning: specified register cannot be written to at operand 1 -- `msr dbgdtrrx_el0,x3' test.s:7: Warning: specified register cannot be read from at operand 2 -- `mrs x3,dbgdtrtx_el0' test.s:8: Warning: specified register cannot be written to at operand 1 -- `msr midr_el1,x3' and disassembly notes: 0000000000000000 <main>: 0: d5130503 msr dbgdtrtx_el0, x3 4: d5130503 msr dbgdtrtx_el0, x3 8: d5330503 mrs x3, dbgdtrrx_el0 c: d5330503 mrs x3, dbgdtrrx_el0 10: d5180003 msr midr_el1, x3 ; note: writing to a read-only register. Note that because dbgdtrrx_el0 and dbgdtrtx_el0 have the same encoding, during disassembly the constraints are use to disambiguate between the two. An exact constraint match is always prefered over partial ones if available. As always the warnings can be suppressed with -w and also be made errors using warnings as errors. binutils/ PR binutils/21446 * doc/binutils.texi (-M): Document AArch64 options. gas/ PR binutils/21446 * testsuite/gas/aarch64/illegal-sysreg-2.s: Fix pmbidr_el1 test. * testsuite/gas/aarch64/illegal-sysreg-2.l: Likewise. * testsuite/gas/aarch64/illegal-sysreg-2.d: Likewise. * testsuite/gas/aarch64/sysreg-diagnostic.s: New. * testsuite/gas/aarch64/sysreg-diagnostic.l: New. * testsuite/gas/aarch64/sysreg-diagnostic.d: New. include/ PR binutils/21446 * opcode/aarch64.h (F_SYS_READ, F_SYS_WRITE): New. opcodes/ PR binutils/21446 * aarch64-asm.c (opintl.h): Include. (aarch64_ins_sysreg): Enforce read/write constraints. * aarch64-dis.c (aarch64_ext_sysreg): Likewise. * aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here. (F_REG_READ, F_REG_WRITE): New. * aarch64-opc.c (aarch64_print_operand): Generate notes for AARCH64_OPND_SYSREG. (F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h. (aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0, mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1, id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1, id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1, id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1, mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1, id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1, id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1, id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1, csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2, rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0, mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1, mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1, pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0. * aarch64-tbl.h (aarch64_opcode_table): Add constraints to msr (F_SYS_WRITE), mrs (F_SYS_READ).
2018-05-15Allow non-fatal errors to be emitted and for disassembly notes be placed on ↵Tamar Christina2-1/+9
AArch64 This patch adds a new platform option "notes" that can be used to indicate if disassembly notes should be placed in the disassembly as comments. These notes can contain information about a failing constraint such as reading from a write-only register. The disassembly will not be blocked because of this but -M notes will emit a comment saying that the operation is not allowed. For assembly this patch adds a new non-fatal status for errors. This is essentially a warning. The reason for not creating an actual warning type is that this causes the interaction between the ordering of warnings and errors to be problematic. Currently the error buffer is almost always filled because of the way operands are matched during assembly. An earlier template may have put an error there that would only be displayed if no other template matches or generates a higher priority error. But by definition a warning is lower priority than a warning, so the error (which is incorrect if another template matched) will supersede the warning. By treating warnings as errors and only later relaxing the severity this relationship keeps working and the existing reporting infrastructure can be re-used. binutils/ PR binutils/21446 * doc/binutils.texi (-M): Document AArch64 options. * NEWS: Document notes and warnings. gas/ PR binutils/21446 * config/tc-aarch64.c (print_operands): Indicate no notes. (output_operand_error_record): Support non-fatal errors. (output_operand_error_report, warn_unpredictable_ldst, md_assemble): Likewise. include/ PR binutils/21446 * opcode/aarch64.h (aarch64_operand_error): Add non_fatal. (aarch64_print_operand): Support notes. opcodes/ PR binutils/21446 * aarch64-dis.c (no_notes: New. (parse_aarch64_dis_option): Support notes. (aarch64_decode_insn, print_operands): Likewise. (print_aarch64_disassembler_options): Document notes. * aarch64-opc.c (aarch64_print_operand): Support notes.
2018-05-15Modify AArch64 Assembly and disassembly functions to be able to fail and ↵Tamar Christina2-3/+18
report why. This patch if the first patch in a series to add the ability to add constraints to system registers that an instruction must adhere to in order for the register to be usable with that instruction. These constraints can also be used to disambiguate between registers with the same encoding during disassembly. This patch adds a new flags entry in the sysreg structures and ensures it is filled in and read out during assembly/disassembly. It also adds the ability for the assemble and disassemble functions to be able to gracefully fail and re-use the existing error reporting infrastructure. The return type of these functions are changed to a boolean to denote success or failure and the error structure is passed around to them. This requires aarch64-gen changes so a lot of the changes here are just mechanical. gas/ PR binutils/21446 * config/tc-aarch64.c (parse_sys_reg): Return register flags. (parse_operands): Fill in register flags. gdb/ PR binutils/21446 * aarch64-tdep.c (aarch64_analyze_prologue, aarch64_software_single_step, aarch64_displaced_step_copy_insn): Indicate not interested in errors. include/ PR binutils/21446 * opcode/aarch64.h (aarch64_opnd_info): Change sysreg to struct. (aarch64_decode_insn): Accept error struct. opcodes/ PR binutils/21446 * aarch64-asm.h (aarch64_insert_operand, aarch64_##x): Return boolean and take error struct. * aarch64-asm.c (aarch64_ext_regno, aarch64_ins_reglane, aarch64_ins_reglist, aarch64_ins_ldst_reglist, aarch64_ins_ldst_reglist_r, aarch64_ins_ldst_elemlist, aarch64_ins_advsimd_imm_shift, aarch64_ins_imm, aarch64_ins_imm_half, aarch64_ins_advsimd_imm_modified, aarch64_ins_fpimm, aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2, aarch64_ins_fbits, aarch64_ins_aimm, aarch64_ins_limm_1, aarch64_ins_limm, aarch64_ins_inv_limm, aarch64_ins_ft, aarch64_ins_addr_simple, aarch64_ins_addr_regoff, aarch64_ins_addr_offset, aarch64_ins_addr_simm, aarch64_ins_addr_simm10, aarch64_ins_addr_uimm12, aarch64_ins_simd_addr_post, aarch64_ins_cond, aarch64_ins_sysreg, aarch64_ins_pstatefield, aarch64_ins_sysins_op, aarch64_ins_barrier, aarch64_ins_prfop, aarch64_ins_hint, aarch64_ins_reg_extended, aarch64_ins_reg_shifted, aarch64_ins_sve_addr_ri_s4xvl, aarch64_ins_sve_addr_ri_s6xvl, aarch64_ins_sve_addr_ri_s9xvl, aarch64_ins_sve_addr_ri_s4, aarch64_ins_sve_addr_ri_u6, aarch64_ins_sve_addr_rr_lsl, aarch64_ins_sve_addr_rz_xtw, aarch64_ins_sve_addr_zi_u5, aarch64_ext_sve_addr_zz, aarch64_ins_sve_addr_zz_lsl, aarch64_ins_sve_addr_zz_sxtw, aarch64_ins_sve_addr_zz_uxtw, aarch64_ins_sve_aimm, aarch64_ins_sve_asimm, aarch64_ins_sve_index, aarch64_ins_sve_limm_mov, aarch64_ins_sve_quad_index, aarch64_ins_sve_reglist, aarch64_ins_sve_scale, aarch64_ins_sve_shlimm, aarch64_ins_sve_shrimm, aarch64_ins_sve_float_half_one, aarch64_ins_sve_float_half_two, aarch64_ins_sve_float_zero_one, aarch64_opcode_encode): Likewise. * aarch64-dis.h (aarch64_extract_operand, aarch64_##x): Likewise. * aarch64-dis.c (aarch64_ext_regno, aarch64_ext_reglane, aarch64_ext_reglist, aarch64_ext_ldst_reglist, aarch64_ext_ldst_reglist_r, aarch64_ext_ldst_elemlist, aarch64_ext_advsimd_imm_shift, aarch64_ext_imm, aarch64_ext_imm_half, aarch64_ext_advsimd_imm_modified, aarch64_ext_fpimm, aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2, aarch64_ext_fbits, aarch64_ext_aimm, aarch64_ext_limm_1, aarch64_ext_limm, decode_limm, aarch64_ext_inv_limm, aarch64_ext_ft, aarch64_ext_addr_simple, aarch64_ext_addr_regoff, aarch64_ext_addr_offset, aarch64_ext_addr_simm, aarch64_ext_addr_simm10, aarch64_ext_addr_uimm12, aarch64_ext_simd_addr_post, aarch64_ext_cond, aarch64_ext_sysreg, aarch64_ext_pstatefield, aarch64_ext_sysins_op, aarch64_ext_barrier, aarch64_ext_prfop, aarch64_ext_hint, aarch64_ext_reg_extended, aarch64_ext_reg_shifted, aarch64_ext_sve_addr_ri_s4xvl, aarch64_ext_sve_addr_ri_s6xvl, aarch64_ext_sve_addr_ri_s9xvl, aarch64_ext_sve_addr_ri_s4, aarch64_ext_sve_addr_ri_u6, aarch64_ext_sve_addr_rr_lsl, aarch64_ext_sve_addr_rz_xtw, aarch64_ext_sve_addr_zi_u5, aarch64_ext_sve_addr_zz, aarch64_ext_sve_addr_zz_lsl, aarch64_ext_sve_addr_zz_sxtw, aarch64_ext_sve_addr_zz_uxtw, aarch64_ext_sve_aimm, aarch64_ext_sve_asimm, aarch64_ext_sve_index, aarch64_ext_sve_limm_mov, aarch64_ext_sve_quad_index, aarch64_ext_sve_reglist, aarch64_ext_sve_scale, aarch64_ext_sve_shlimm, aarch64_ext_sve_shrimm, aarch64_ext_sve_float_half_one, aarch64_ext_sve_float_half_two, aarch64_ext_sve_float_zero_one, aarch64_opcode_decode): Likewise. (determine_disassembling_preference, aarch64_decode_insn, print_insn_aarch64_word, print_insn_data): Take errors struct. (print_insn_aarch64): Use errors. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-gen.c (print_operand_inserter): Use errors and change type to boolean in aarch64_insert_operan. (print_operand_extractor): Likewise. * aarch64-opc.c (aarch64_print_operand): Use sysreg struct.
2018-05-15Fix error messages in the NFP sources when building for 32-bit targets.Francois H. Theron2-55/+54
bfd * targets.c: Wrap nfp_elf64_vec in BFD64 ifdef. include * opcode/nfp.h: Use uint64_t instead of bfd_vma. opcodes * nfp-dis.c: Use uint64_t for instruction variables, not bfd_vma.
2018-05-10Add support for detecting Freescale S12Z binaries in readelf.John Darrington2-0/+7
* include/elf/common.h (EM_S12Z): New macro * binutils/readelf.c (get_machine_name): EM_S12Z - handle new case.
2018-05-09PR22069, Several instances of register accidentally spelled as regsiterAlan Modra2-2/+9
PR 22069 binutils/ * od-macho.c (dump_unwind_encoding_x86): Adjust for macro renaming. cpu/ChangeLog * or1kcommon.cpu (spr-reg-info): Typo fix. include/ChangeLog * mach-o/unwind.h (MACH_O_UNWIND_X86_64_RBP_FRAME_REGISTERS): Rename from MACH_O_UNWIND_X86_64_RBP_FRAME_REGSITERS. (MACH_O_UNWIND_X86_EBP_FRAME_REGISTERS): Rename from MACH_O_UNWIND_X86_EBP_FRAME_REGSITERS. opcodes/ChangeLog * cr16-opc.c (cr16_instruction): Comment typo fix. * hppa-dis.c (print_insn_hppa): Likewise. sim/ppc/ChangeLog * e500_registers.h: Comment typo fix. * ppc-instructions (ppc_insn_mfcr): Likewise.
2018-05-08RISC-V: Add missing hint instructions from RV128I.Jim Wilson2-0/+12
gas/ * testsuite/gas/riscv/c-zero-imm.d: Add more tests. * testsuite/gas/riscv/c-zero-imm.s: Likewise. * testsuite/gas/riscv/c-zero-reg.d: Fix typo in test. Add disabled future test for RV128 support. * testsuite/gas/riscv/c-zero-reg.s: Likewise. include/ * opcode/riscv-opc.h (MATCH_C_SRLI64, MASK_C_SRLI64): New. (MATCH_C_SRAI64, MASK_C_SRAI64): New. (MATCH_C_SLLI64, MASK_C_SLLI64): New. opcodes/ * riscv-opc.c (match_c_slli, match_slli_as_c_slli): New. (match_c_slli64, match_srxi_as_c_srxi): New. (riscv_opcodes) <slli, sll>: Use match_slli_as_c_slli. <srli, srl, srai, sra>: Use match_srxi_as_c_srxi. <c.slli, c.srli, c.srai>: Use match_s_slli. <c.slli64, c.srli64, c.srai64>: New.
2018-05-07Cleanup ppc code dealing with opcode dumps.Peter Bergner2-3/+9
include/ * opcode/ppc.h (powerpc_num_opcodes): Change type to unsigned. (vle_num_opcodes): Likewise. (spe2_num_opcodes): Likewise. opcodes/ * ppc-opc.c (powerpc_num_opcodes): Likewise. (vle_num_opcodes): Likewise. (spe2_num_opcodes): Likewise. * ppc-dis.c (disassemble_init_powerpc) <powerpc_opcd_indices>: Rewrite initialization loop. (disassemble_init_powerpc) <vle_opcd_indices>: Likewise. (disassemble_init_powerpc) <spe2_opcd_indices>: Likewise. Initialize only once. gas/ * config/tc-ppc.c (ppc_setup_opcodes) <powerpc_opcodes>: Rewrite code to dump the entire opcode table. (ppc_setup_opcodes) <spe2_opcodes>: Likewise. (ppc_setup_opcodes) <vle_opcodes>: Likewise. Fix calculation of opcode index.
2018-05-04-Wstringop-truncation warningsAlan Modra3-2/+18
This patch is aimed at silencing gcc8 -Wstringop-truncation warnings. Unfortunately adding __attribute__ ((__nonstring)) doesn't work in a number of the places patched here, (see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85643) so if you have recent glibc headers installed you'll need to configure binutils with --disable-werror to compile using gcc8 or gcc9. include/ * ansidecl.h: Import from gcc. * coff/internal.h (struct internal_scnhdr): Add ATTRIBUTE_NONSTRING to s_name. (struct internal_syment): Add ATTRIBUTE_NONSTRING to _n_name. bfd/ * elf-linux-core.h (struct elf_external_linux_prpsinfo32_ugid32), (struct elf_external_linux_prpsinfo32_ugid16), (struct elf_external_linux_prpsinfo64_ugid32), (struct elf_external_linux_prpsinfo64_ugid16): Add ATTRIBUTE_NONSTRING to pr_fname and pr_psargs fields. Remove GCC diagnostic pragmas. Move comment to.. * elf.c (elfcore_write_prpsinfo): ..here. Indent nested preprocessor directives. * elf32-arm.c (elf32_arm_nabi_write_core_note): Add ATTRIBUTE_NONSTRING to data. * elf32-ppc.c (ppc_elf_write_core_note): Likewise. * elf32-s390.c (elf_s390_write_core_note): Likewise. * elf64-s390.c (elf_s390_write_core_note): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_write_core_note): Likewise. * elf64-x86-64.c (elf_x86_64_write_core_note): Add GCC diagnostic pragmas. * peXXigen.c (_bfd_XXi_swap_scnhdr_out): Use strnlen to avoid false positive gcc-8 warning. gas/ * config/obj-evax.c (shorten_identifier): Use memcpy in place of strncpy. * config/obj-macho.c (obj_mach_o_make_or_get_sect): Ensure segname and sectname fields are NUL terminated.
2018-04-30This patch adds support to objdump for disassembly of NFP (Netronome Flow ↵Francois H. Theron5-0/+482
Processor) ELF files (.nffw) as well as some basic readelf support. bfd * Makefile.am: Added NFP files to build. * archures.c: Added bfd_arch_nfp * config.bfd: Added NFP support. * configure.ac: Added NFP support. * cpu-nfp.c: New, for NFP support. * elf-bfd.h: Added elf_section_info() * elf64-nfp.c: New, for NFP support. * po/SRC-POTFILES.in: Added NFP source files. * targets.c: Added nfp_elf64_vec * bfd-in2.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils* readelf.c: Very basic support for EM_NFP and its section types. * testsuite/binutils-all/nfp: New directory. * testsuite/binutils-all/nfp/objdump.exp: New file. Run new tests. * testsuite/binutils-all/nfp/test2_ctx8.d: New file. * testsuite/binutils-all/nfp/test2_no-pc_ctx4.d: New file. * testsuite/binutils-all/nfp/test1.d: New file. * testsuite/binutils-all/nfp/nfp6000.nffw: New file. * testsuite/binutils-all/nfp/test2_nfp6000.nffw: New file. * NEWS: Mention the new support. include * dis-asm.h: Added print_nfp_disassembler_options prototype. * elf/common.h: Added EM_NFP, officially assigned. See Google Group Generic System V Application Binary Interface. * elf/nfp.h: New, for NFP support. * opcode/nfp.h: New, for NFP support. opcodes Makefile.am: Added nfp-dis.c. configure.ac: Added bfd_nfp_arch. disassemble.h: Added print_insn_nfp prototype. disassemble.c: Added ARCH_nfp and call to print_insn_nfp nfp-dis.c: New, for NFP support. po/POTFILES.in: Added nfp-dis.c to the list. Makefile.in: Regenerate. configure: Regenerate.
2018-04-25[ARM] Add TLS relocations for FDPIC.Christophe Lyon2-0/+9
Define and handle TLS relocations for FDPIC in BFD and gas. In gas, the new relocations are rejected if the --fdpic option was not specified. We also define the __tdata_start symbol to mark the start of the .tdata section. This allows FDPIC static binaries to find the start of .tdata section, since phdr->p_vaddr of TLS segment is not a valid value for FDPIC. 2018-04-25 Christophe Lyon <christophe.lyon@st.com> Mickaël Guêné <mickael.guene@st.com> bfd/: * bfd-in2.h (BFD_RELOC_ARM_TLS_GD32_FDPIC) (BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC): New relocations. * elf32-arm.c (elf32_arm_howto_table_2): Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC relocations. (elf32_arm_reloc_map): Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC. (struct elf32_arm_link_hash_table): Update comment. (elf32_arm_final_link_relocate): Handle TLS FDPIC relocations. (IS_ARM_TLS_RELOC): Likewise. (elf32_arm_check_relocs): Likewise. (allocate_dynrelocs_for_symbol): Likewise. (elf32_arm_size_dynamic_sections): Update comment. * reloc.c: Add BFD_RELOC_ARM_TLS_GD32_FDPIC, BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC. gas/ * config/tc-arm.c (reloc_names): Add TLSGD_FDPIC, TLSLDM_FDPIC, GOTTPOFF_FDIC relocations. (md_apply_fix): Handle the new TLS FDPIC relocations. (tc_gen_reloc): Likewise. (arm_fix_adjustable): Likewise. include/ * elf/arm.h: Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC. ld/ * scripttempl/elf.sc: Define __tdata_start for .tdata section.
2018-04-25[ARM] Add FDPIC relocations definitionsChristophe Lyon2-0/+11
Add FDPIC relocation definitions in BFD and gas. Gas rejects them if the --fdpic option was not specified. 2018-04-25 Christophe Lyon <christophe.lyon@st.com> Mickaël Guêné <mickael.guene@st.com> bfd/ * bfd-in2.c (BFD_RELOC_ARM_GOTFUNCDESC) (BFD_RELOC_ARM_GOTOFFFUNCDESC, BFD_RELOC_ARM_FUNCDESC) (BFD_RELOC_ARM_FUNCDESC_VALUE): New. * elf32-arm.c (elf32_arm_howto_table_2): Add R_ARM_GOTFUNCDESC, R_ARM_GOTOFFFUNCDESC, R_ARM_FUNCDESC, R_ARM_FUNCDESC_VALUE. (elf32_arm_howto_from_type): Take new members of elf32_arm_howto_table_2 into account. (elf32_arm_reloc_map): Add BFD_RELOC_ARM_GOTFUNCDESC, BFD_RELOC_ARM_GOTOFFFUNCDESC, BFD_RELOC_ARM_FUNCDESC, BFD_RELOC_ARM_FUNCDESC_VALUE. * reloc.c: Add BFD_RELOC_ARM_GOTFUNCDESC, BFD_RELOC_ARM_GOTOFFFUNCDESC, BFD_RELOC_ARM_FUNCDESC, BFD_RELOC_ARM_FUNCDESC_VALUE. gas/ * config/tc-arm.c (reloc_names): Add gotfuncdesc, gotofffuncdesc, funcdesc. (md_apply_fix): Support the new relocations. (tc_gen_reloc): Likewise. * testsuite/gas/arm/reloc-fdpic.d: New. * testsuite/gas/arm/reloc-fdpic.s: New. include/ * elf/arm.h (R_ARM_GOTFUNCDESC, R_ARM_GOTOFFFUNCDESC) (R_ARM_FUNCDESC) (R_ARM_FUNCDESC_VALUE): Define new relocations.
2018-04-25[ARM] Add FDPIC OSABI flag support.Christophe Lyon2-0/+6
ELF files targetting ARM FDPIC use the ELFOSABI_ARM_FDPIC flag. Set it appropriately in file generators (eg. gas), and handle it in readers (eg. readelf). 2018-04-25 Christophe Lyon <christophe.lyon@st.com> Mickaël Guêné <mickael.guene@st.com> bfd/ * elf32-arm.c (elf32_arm_print_private_bfd_data): Support EF_ARM_PIC and ELFOSABI_ARM_FDPIC. (elf32_arm_post_process_headers): Support ELFOSABI_ARM_FDPIC. (ELF_OSABI): Define to ELFOSABI_ARM_FDPIC. binutils/ * readelf.c (decode_ARM_machine_flags): Support EF_ARM_PIC. (get_osabi_name): Support ELFOSABI_ARM_FDPIC. gas/ * config/tc-arm.c (arm_fdpic): New. (elf32_arm_target_format): Support FDPIC. (OPTION_FDPIC): New. (md_longopts): Support FDPIC. (md_parse_option): Likewise. (md_show_usage): Likewise. include/ * elf/arm.h (EF_ARM_FDPIC): New.
2018-04-18Remove mips aout, coff, and pe supportAlan Modra2-67/+4
include/coff/mips.h needs to stay for ecoff debug support. include/ * coff/mipspe.h: Delete. bfd/ * Makefile.am: Remove mips aout, coff, and pe support. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-mips.c: Delete * mipsbsd.c: Delete * pe-mips.c: Delete * pei-mips.c: Delete * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate.
2018-04-18various i386-aout and i386-coff target removalAlan Modra2-87/+4
Also tidies some other aout leftovers in binutils-common.exp. bfd/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfdint.texi: Likewise. * targets.c: Likewise. * freebsd.h: Delete. * i386dynix.c: Delete. * i386freebsd.c: Delete. * i386linux.c: Delete. * i386mach3.c: Delete. * i386netbsd.c: Delete. * i386os9k.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/lib/binutils-common.exp: Remove support for assorted aout targets. gas/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * config/obj-elf.c: Likewise. * config/tc-i386.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * config/te-dynix.h: Delete. * config/te-i386aix.h: Delete. * config/te-mach.h: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. include/ * aout/dynix3.h: Delete. ld/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * configure.tgt: Likewise. * testsuite/ld-discard/discard.exp: Likewise. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/tls.exp: Likewise. * testsuite/ld-elf/tls_common.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-gc/abi-note.d: Likewise. * testsuite/ld-gc/pr19167.d: Likewise. * testsuite/ld-gc/pr20022.d: Likewise. * testsuite/ld-gc/start.d: Likewise. * testsuite/ld-gc/stop.d: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-ifunc/binutils.exp: Likewise. * testsuite/ld-ifunc/ifunc.exp: Likewise. * testsuite/ld-linkonce/linkonce.exp: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-scripts/empty-address-2a.d: Likewise. * testsuite/ld-scripts/empty-address-2b.d: Likewise. * testsuite/ld-scripts/phdrs2.exp: Likewise. * testsuite/ld-scripts/section-match-1.d: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * testsuite/ld-size/size.exp: Likewise. * testsuite/ld-sparc/sparc.exp: Likewise. * emulparams/i386coff.sh: Delete. * emulparams/i386linux.sh: Delete. * emulparams/i386mach.sh: Delete. * emulparams/i386nbsd.sh: Delete. * emulparams/vsta.sh: Delete. * scripttempl/i386coff.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-18Correct ChangeLog dates for git commit 3f0a5f17d7fAlan Modra1-1/+1
2018-04-17[MicroBlaze] PIC data text relativeMichael Eager3-1/+15
Andrew Sadek <andrew.sadek.se@gmail.com> A new implemented feature in GCC Microblaze that allows Position Independent Code to run using Data Text Relative addressing instead of using Global Offset Table. Its aim was to make 'PIC' more efficient and flexible as elf size excess performance overhead were noticed when using GOT due to the indirect addressing. include/ChangeLog: * bfdlink.h (Add flag): Add new flag @ 'bfd_link_info' struct. * elf/microblaze.h (Add 3 new relocations): R_MICROBLAZE_TEXTPCREL_64, R_MICROBLAZE_TEXTREL_64 and R_MICROBLAZE_TEXTREL_32_LO for relax function. bfd/ChangeLog: * bfd/reloc.c (2 new BFD relocations): BFD_RELOC_MICROBLAZE_64_TEXTPCREL & BFD_RELOC_MICROBLAZE_64_TEXTPCREL * bfd/bfd-in2.h: Regenerate * bfd/libbfd.h: Regenerate * bfd/elf32-microblaze.c (Handle new relocs): define 'HOWTO' of 3 new relocs and handle them in both relocate and relax functions. (microblaze_elf_reloc_type_lookup): add mapping between for new bfd relocs. (microblaze_elf_relocate_section): Handle new relocs in case of elf relocation. (microblaze_elf_relax_section): Handle new relocs for elf relaxation. gas/ChangeLog: * gas/config/tc-microblaze.c (Handle new relocs directives in assembler): Handle new relocs from compiler output. (imm_types): add new imm types for data text relative addressing TEXT_OFFSET, TEXT_PC_OFFSET (md_convert_frag): conversion for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL (md_apply_fix): apply fix for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL (md_estimate_size_before_relax): estimate size for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL (tc_gen_reloc): generate relocations for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL ld/ChangeLog: * ld/lexsup.c (Add 2 ld options): (ld_options): add disable-multiple-abs-defs @ 'ld_options' array (parse_args): parse new option and pass flag to 'link_info' struct. * ld/ldlex.h (Add enum): add new enum @ 'option_values' enum. * ld/ld.texinfo (Add new option): Add description for 'disable-multiple-abs-defs' * ld/main.c: Initialize flags with false @ 'main'. Handle disable-multiple-abs-defs @ 'mutiple_definition'.
2018-04-17Reinstate readelf decoding of i860, i960 and i370 relocsAlan Modra4-0/+170
include/ * elf/i370.h: Revert removal. * elf/i860.h: Likewise. * elf/i960.h: Likewise. binutils * readelf.c: Revert 2018-04-16 and 2018-04-11 changes.
2018-04-16sparc-coff removal leftoverAlan Modra2-164/+4
* coff/sparc.h: Delete.
2018-04-16Remove m68k-aout and m68k-coff supportAlan Modra6-393/+9
include/ * aout/host.h: Remove m68k-aout and m68k-coff support. * aout/hp300hpux.h: Delete. * coff/apollo.h: Delete. * coff/aux-coff.h: Delete. * coff/m68k.h: Delete. bfd/ * Makefile.am: Remove m68k-aout and m68k-coff support. * aoutf1.h: Likewise. * aoutx.h: Likewise. * archive.c: Likewise. * bfd-in.h: Likewise. * bfd.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * configure.host: Likewise. * doc/bfd.texinfo: Likewise. * doc/bfdint.texi: Likewise. * freebsd.h: Likewise. * gen-aout.c: Likewise. * hpux-core.c: Likewise. * libaout.h: Likewise. * libbfd-in.h: Likewise. * pdp11.c: Likewise. * peicode.h: Likewise. * riscix.c: Likewise. * targets.c: Likewise. * aout0.c: Delete. * coff-apollo.c: Delete. * coff-aux.c: Delete. * coff-m68k.c: Delete. * coff-svm68k.c: Delete. * coff-u68k.c: Delete. * hosts/delta68.h: Delete. * hosts/hp300bsd.h: Delete. * hosts/m68kaux.h: Delete. * hosts/news.h: Delete. * hp300bsd.c: Delete. * hp300hpux.c: Delete. * liboasys.h: Delete. * m68k4knetbsd.c: Delete. * m68klinux.c: Delete. * m68knetbsd.c: Delete. * oasys.c: Delete. * versados.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff support. * testsuite/binutils-all/copy-3.d: Likewise. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * Makefile.am: Remove m68k-aout and m68k-coff support. * config/tc-m68k.c: Likewise. * config/tc-m68k.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * testsuite/gas/all/weakref1u.d: Likewise. * testsuite/gas/m68k/all.exp: Likewise. * testsuite/gas/m68k/br-isaa.d: Likewise. * testsuite/gas/m68k/br-isab.d: Likewise. * testsuite/gas/m68k/br-isac.d: Likewise. * config/te-psos.h: Delete. * config/te-sun3.h: Delete. * testsuite/gas/m68k-coff/gas.exp: Delete. * testsuite/gas/m68k-coff/p2389.s: Delete. * testsuite/gas/m68k-coff/p2389a.s: Delete. * testsuite/gas/m68k-coff/p2430.s: Delete. * testsuite/gas/m68k-coff/p2430a.s: Delete. * testsuite/gas/m68k-coff/t1.s: Delete. * testsuite/gas/m68k/p3041.d: Delete. * testsuite/gas/m68k/p3041.s: Delete. * testsuite/gas/m68k/p3041data.d: Delete. * testsuite/gas/m68k/p3041data.s: Delete. * testsuite/gas/m68k/p3041pcrel.d: Delete. * testsuite/gas/m68k/p3041pcrel.s: Delete. * testsuite/gas/m68k/t2.d: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove m68k-aout and m68k-coff support. * configure.tgt: Likewise. * emultempl/m68kelf.em: Likewise. * ld.texinfo: Likewise. * mri.c: Likewise. * emulparams/delta68.sh: Delete. * emulparams/hp300bsd.sh: Delete. * emulparams/hp3hpux.sh: Delete. * emulparams/m68k4knbsd.sh: Delete. * emulparams/m68kaout.sh: Delete. * emulparams/m68kaux.sh: Delete. * emulparams/m68kcoff.sh: Delete. * emulparams/m68klinux.sh: Delete. * emulparams/m68knbsd.sh: Delete. * emulparams/m68kpsos.sh: Delete. * emulparams/sun3.sh: Delete. * emultempl/m68kcoff.em: Delete. * scripttempl/delta68.sc: Delete. * scripttempl/m68kaux.sc: Delete. * scripttempl/m68kcoff.sc: Delete. * scripttempl/psos.sc: Delete. * testsuite/ld-versados/t1-1.ro: Delete. * testsuite/ld-versados/t1-2.ro: Delete. * testsuite/ld-versados/t1.ld: Delete. * testsuite/ld-versados/t1.ook: Delete. * testsuite/ld-versados/t2-1.ro: Delete. * testsuite/ld-versados/t2-2.ro: Delete. * testsuite/ld-versados/t2-3.ro: Delete. * testsuite/ld-versados/t2.ld: Delete. * testsuite/ld-versados/t2.ook: Delete. * testsuite/ld-versados/versados.exp: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove sh5 and sh64 supportAlan Modra2-1/+4
include/ * dis-asm.h: Remove sh5 and sh64 support. bfd/ * Makefile.am: Remove sh5 and sh64 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-sh.c: Likewise. * elf32-sh-relocs.h: Likewise. * elf32-sh.c: Likewise. * targets.c: Likewise. * elf32-sh64-com.c: Delete. * elf32-sh64.c: Delete. * elf32-sh64.h: Delete. * elf64-sh64.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove sh5 and sh64 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Delete. * sh64-opc.c: Delete. * sh64-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. bintuils/ * testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support. gas/ * Makefile.am: Remove sh5 and sh64 support. * config/tc-sh.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/cfi/cfi.exp: Likewise. * testsuite/gas/sh/basic.exp: Likewise. * config/tc-sh64.c: Delete. * config/tc-sh64.h: Delete. * doc/c-sh64.texi: Delete. * testsuite/gas/sh/sh64/abi-32.d: Delete. * testsuite/gas/sh/sh64/abi-32.s: Delete. * testsuite/gas/sh/sh64/abi-64.d: Delete. * testsuite/gas/sh/sh64/abi-64.s: Delete. * testsuite/gas/sh/sh64/basic-1.d: Delete. * testsuite/gas/sh/sh64/basic-1.s: Delete. * testsuite/gas/sh/sh64/case-1.d: Delete. * testsuite/gas/sh/sh64/case-1.s: Delete. * testsuite/gas/sh/sh64/case-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange1-1.d: Delete. * testsuite/gas/sh/sh64/crange1-2.d: Delete. * testsuite/gas/sh/sh64/crange1.s: Delete. * testsuite/gas/sh/sh64/crange2-1.d: Delete. * testsuite/gas/sh/sh64/crange2-2.d: Delete. * testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange2.s: Delete. * testsuite/gas/sh/sh64/crange3-1.d: Delete. * testsuite/gas/sh/sh64/crange3.s: Delete. * testsuite/gas/sh/sh64/crange4-1.d: Delete. * testsuite/gas/sh/sh64/crange4.s: Delete. * testsuite/gas/sh/sh64/crange5-1.d: Delete. * testsuite/gas/sh/sh64/crange5.s: Delete. * testsuite/gas/sh/sh64/creg-1.d: Delete. * testsuite/gas/sh/sh64/creg-1.s: Delete. * testsuite/gas/sh/sh64/creg-2.d: Delete. * testsuite/gas/sh/sh64/creg-2.s: Delete. * testsuite/gas/sh/sh64/datal-1.s: Delete. * testsuite/gas/sh/sh64/datal-2.d: Delete. * testsuite/gas/sh/sh64/datal-2.s: Delete. * testsuite/gas/sh/sh64/datal-3.s: Delete. * testsuite/gas/sh/sh64/datal32-1.d: Delete. * testsuite/gas/sh/sh64/datal32-3.d: Delete. * testsuite/gas/sh/sh64/datal64-1.d: Delete. * testsuite/gas/sh/sh64/datal64-3.d: Delete. * testsuite/gas/sh/sh64/eh-1.d: Delete. * testsuite/gas/sh/sh64/eh-1.s: Delete. * testsuite/gas/sh/sh64/endian-1.d: Delete. * testsuite/gas/sh/sh64/endian-1.s: Delete. * testsuite/gas/sh/sh64/endian-2.d: Delete. * testsuite/gas/sh/sh64/endian-2.s: Delete. * testsuite/gas/sh/sh64/err-1.s: Delete. * testsuite/gas/sh/sh64/err-2.s: Delete. * testsuite/gas/sh/sh64/err-3.s: Delete. * testsuite/gas/sh/sh64/err-4.s: Delete. * testsuite/gas/sh/sh64/err-abi-32.s: Delete. * testsuite/gas/sh/sh64/err-abi-64.s: Delete. * testsuite/gas/sh/sh64/err-dsp.s: Delete. * testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete. * testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt-1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete. * testsuite/gas/sh/sh64/err-ptb-1.s: Delete. * testsuite/gas/sh/sh64/err-ptb-2.s: Delete. * testsuite/gas/sh/sh64/err.exp: Delete. * testsuite/gas/sh/sh64/immexpr1.s: Delete. * testsuite/gas/sh/sh64/immexpr2.s: Delete. * testsuite/gas/sh/sh64/immexpr32-1.d: Delete. * testsuite/gas/sh/sh64/immexpr32-2.d: Delete. * testsuite/gas/sh/sh64/immexpr64-1.d: Delete. * testsuite/gas/sh/sh64/immexpr64-2.d: Delete. * testsuite/gas/sh/sh64/lineno.d: Delete. * testsuite/gas/sh/sh64/lineno.s: Delete. * testsuite/gas/sh/sh64/localcom-1.d: Delete. * testsuite/gas/sh/sh64/localcom-1.s: Delete. * testsuite/gas/sh/sh64/mix-1.d: Delete. * testsuite/gas/sh/sh64/mix-1.s: Delete. * testsuite/gas/sh/sh64/mix-noexp-1.d: Delete. * testsuite/gas/sh/sh64/movi-1.s: Delete. * testsuite/gas/sh/sh64/movi-2.s: Delete. * testsuite/gas/sh/sh64/movi-3.d: Delete. * testsuite/gas/sh/sh64/movi-3.s: Delete. * testsuite/gas/sh/sh64/movi32-1.d: Delete. * testsuite/gas/sh/sh64/movi32-2.d: Delete. * testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/movi64-1.d: Delete. * testsuite/gas/sh/sh64/movi64-2.d: Delete. * testsuite/gas/sh/sh64/movi64-2.s: Delete. * testsuite/gas/sh/sh64/movi64-3.d: Delete. * testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt-1.d: Delete. * testsuite/gas/sh/sh64/pt-1.s: Delete. * testsuite/gas/sh/sh64/pt-2.s: Delete. * testsuite/gas/sh/sh64/pt-noexp-1.d: Delete. * testsuite/gas/sh/sh64/pt32-1.d: Delete. * testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt64-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-2.d: Delete. * testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/ptc-1.s: Delete. * testsuite/gas/sh/sh64/ptc32-1.d: Delete. * testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext-1.s: Delete. * testsuite/gas/sh/sh64/ptext32-1.d: Delete. * testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/rel-1.s: Delete. * testsuite/gas/sh/sh64/rel-2.s: Delete. * testsuite/gas/sh/sh64/rel-3.s: Delete. * testsuite/gas/sh/sh64/rel-4.s: Delete. * testsuite/gas/sh/sh64/rel-5.s: Delete. * testsuite/gas/sh/sh64/rel32-1.d: Delete. * testsuite/gas/sh/sh64/rel32-2.d: Delete. * testsuite/gas/sh/sh64/rel32-3.d: Delete. * testsuite/gas/sh/sh64/rel32-4.d: Delete. * testsuite/gas/sh/sh64/rel32-5.d: Delete. * testsuite/gas/sh/sh64/rel64-1.d: Delete. * testsuite/gas/sh/sh64/rel64-2.d: Delete. * testsuite/gas/sh/sh64/rel64-3.d: Delete. * testsuite/gas/sh/sh64/rel64-4.d: Delete. * testsuite/gas/sh/sh64/rel64-5.d: Delete. * testsuite/gas/sh/sh64/relax-1.d: Delete. * testsuite/gas/sh/sh64/relax-1.s: Delete. * testsuite/gas/sh/sh64/relax-2.d: Delete. * testsuite/gas/sh/sh64/relax-2.s: Delete. * testsuite/gas/sh/sh64/relax-3.d: Delete. * testsuite/gas/sh/sh64/relax-3.s: Delete. * testsuite/gas/sh/sh64/sh64.exp: Delete. * testsuite/gas/sh/sh64/shift-1.s: Delete. * testsuite/gas/sh/sh64/shift-2.s: Delete. * testsuite/gas/sh/sh64/shift-3.s: Delete. * testsuite/gas/sh/sh64/shift32-1.d: Delete. * testsuite/gas/sh/sh64/shift32-3.d: Delete. * testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete. * testsuite/gas/sh/sh64/shift64-1.d: Delete. * testsuite/gas/sh/sh64/shift64-2.d: Delete. * testsuite/gas/sh/sh64/shift64-3.d: Delete. * testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete. * testsuite/gas/sh/sh64/syntax-1.d: Delete. * testsuite/gas/sh/sh64/syntax-1.s: Delete. * testsuite/gas/sh/sh64/syntax-2.d: Delete. * testsuite/gas/sh/sh64/syntax-2.s: Delete. * testsuite/gas/sh/sh64/ua-1.s: Delete. * testsuite/gas/sh/sh64/ua32-1.d: Delete. * testsuite/gas/sh/sh64/ua64-1.d: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sh5 and sh64 support. * configure.tgt: Likewise. * ldlang.c: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-gc/pr13683.d: Likewise. * testsuite/ld-scripts/crossref.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-sh/ld-r-1.d: Likewise. * testsuite/ld-sh/rd-sh.exp: Likewise. * testsuite/ld-sh/sh.exp: Likewise. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/ld-undefined/undefined.exp: Likewise. * emulparams/shelf32.sh: Delete. * emulparams/shelf32_linux.sh: Delete. * emulparams/shelf32_nbsd.sh: Delete. * emulparams/shelf64.sh: Delete. * emulparams/shelf64_nbsd.sh: Delete. * emulparams/shlelf32.sh: Delete. * emulparams/shlelf32_linux.sh: Delete. * emulparams/shlelf32_nbsd.sh: Delete. * emulparams/shlelf64.sh: Delete. * emulparams/shlelf64_nbsd.sh: Delete. * emultempl/sh64elf.em: Delete. * testsuite/ld-sh/sh64/abi32.sd: Delete. * testsuite/ld-sh/sh64/abi32.xd: Delete. * testsuite/ld-sh/sh64/abi64.sd: Delete. * testsuite/ld-sh/sh64/abi64.xd: Delete. * testsuite/ld-sh/sh64/abixx-noexp.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.xd: Delete. * testsuite/ld-sh/sh64/crange-1.s: Delete. * testsuite/ld-sh/sh64/crange-2a.s: Delete. * testsuite/ld-sh/sh64/crange-2b.s: Delete. * testsuite/ld-sh/sh64/crange-2c.s: Delete. * testsuite/ld-sh/sh64/crange-2d.s: Delete. * testsuite/ld-sh/sh64/crange-2e.s: Delete. * testsuite/ld-sh/sh64/crange-2f.s: Delete. * testsuite/ld-sh/sh64/crange-2g.s: Delete. * testsuite/ld-sh/sh64/crange-2h.s: Delete. * testsuite/ld-sh/sh64/crange-2i.s: Delete. * testsuite/ld-sh/sh64/crange1.rd: Delete. * testsuite/ld-sh/sh64/crange2.rd: Delete. * testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete. * testsuite/ld-sh/sh64/crange3-media.rd: Delete. * testsuite/ld-sh/sh64/crange3.dd: Delete. * testsuite/ld-sh/sh64/crange3.rd: Delete. * testsuite/ld-sh/sh64/crangerel1.rd: Delete. * testsuite/ld-sh/sh64/crangerel2.rd: Delete. * testsuite/ld-sh/sh64/dlsection-1.s: Delete. * testsuite/ld-sh/sh64/dlsection.sd: Delete. * testsuite/ld-sh/sh64/endian.dbd: Delete. * testsuite/ld-sh/sh64/endian.dld: Delete. * testsuite/ld-sh/sh64/endian.ld: Delete. * testsuite/ld-sh/sh64/endian.s: Delete. * testsuite/ld-sh/sh64/endian.sbd: Delete. * testsuite/ld-sh/sh64/endian.sld: Delete. * testsuite/ld-sh/sh64/gotplt.d: Delete. * testsuite/ld-sh/sh64/gotplt.map: Delete. * testsuite/ld-sh/sh64/gotplt.s: Delete. * testsuite/ld-sh/sh64/init-cmpct.d: Delete. * testsuite/ld-sh/sh64/init-media.d: Delete. * testsuite/ld-sh/sh64/init.s: Delete. * testsuite/ld-sh/sh64/init64.d: Delete. * testsuite/ld-sh/sh64/mix1-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix1.sd: Delete. * testsuite/ld-sh/sh64/mix1.xd: Delete. * testsuite/ld-sh/sh64/mix2-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix2.sd: Delete. * testsuite/ld-sh/sh64/mix2.xd: Delete. * testsuite/ld-sh/sh64/rd-sh64.exp: Delete. * testsuite/ld-sh/sh64/rel-1.s: Delete. * testsuite/ld-sh/sh64/rel-2.s: Delete. * testsuite/ld-sh/sh64/rel32.xd: Delete. * testsuite/ld-sh/sh64/rel64.xd: Delete. * testsuite/ld-sh/sh64/relax.exp: Delete. * testsuite/ld-sh/sh64/relax1.s: Delete. * testsuite/ld-sh/sh64/relax2.s: Delete. * testsuite/ld-sh/sh64/relax3.s: Delete. * testsuite/ld-sh/sh64/relax4.s: Delete. * testsuite/ld-sh/sh64/reldl-1.s: Delete. * testsuite/ld-sh/sh64/reldl-2.s: Delete. * testsuite/ld-sh/sh64/reldl32.rd: Delete. * testsuite/ld-sh/sh64/reldl64.rd: Delete. * testsuite/ld-sh/sh64/relfail.exp: Delete. * testsuite/ld-sh/sh64/relfail.s: Delete. * testsuite/ld-sh/sh64/sh64-1.s: Delete. * testsuite/ld-sh/sh64/sh64-2.s: Delete. * testsuite/ld-sh/sh64/sh64.exp: Delete. * testsuite/ld-sh/sh64/shcmp-1.s: Delete. * testsuite/ld-sh/sh64/shdl-1.s: Delete. * testsuite/ld-sh/sh64/shdl-2.s: Delete. * testsuite/ld-sh/sh64/shdl32.xd: Delete. * testsuite/ld-sh/sh64/shdl64.sd: Delete. * testsuite/ld-sh/sh64/shdl64.xd: Delete. * testsuite/ld-sh/sh64/shmix-1.s: Delete. * testsuite/ld-sh/sh64/shmix-2.s: Delete. * testsuite/ld-sh/sh64/shmix-3.s: Delete. * testsuite/ld-sh/sh64/stobin-0-dso.d: Delete. * testsuite/ld-sh/sh64/stobin-1.d: Delete. * testsuite/ld-sh/sh64/stobin.s: Delete. * testsuite/ld-sh/sh64/stolib.s: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove w65 supportAlan Modra3-64/+5
include/ * coff/internal.h: Remove w65 support. * coff/w65.h: Delete. bfd/ * Makefile.am: Remove w65 support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-w65.c: Delete. * cpu-w65.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove w65 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * w65-dis.c: Delete. * w65-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove w65 support. ld/ * Makefile.am: Remove w65 support. * configure.tgt: Likewise. * emulparams/w65.sh: Delete. * scripttempl/w65.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove we32k supportAlan Modra2-62/+4
include/ * coff/we32k.h: Delete. bfd/ * Makefile.am: Remove we32k support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-we32k.c: Delete. * cpu-we32k.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * configure.ac: Remove we32k support. * configure: Regenerate. bintuils/ * testsuite/binutils-all/objdump.exp: Remove we32k support.
2018-04-16Remove m88k supportAlan Modra4-655/+6
include/ * coff/internal.h: Remove m88k support. * coff/m88k.h: Delete. * opcode/m88k.h: Delete. bfd/ * Makefile.am: Remove m88k support. * aoutx.h: Likewise. * archures.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-ns32k.c: Likewise. * elf32-nds32.c: Likewise. * mach-o.c: Likewise. * netbsd-core.c: Likewise. * reloc.c: Likewise. * targets.c: Likewise. * coff-m88k.c: Delete. * cpu-m88k.c: Delete. * elf32-m88k.c: Delete. * hosts/m88kmach3.h: Delete. * m88kmach3.c: Delete. * m88kopenbsd.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove m88k support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * m88k-dis.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * MAINTAINERS (Mark Kettenis): Move to past maintainers. * testsuite/binutils-all/objdump.exp: Remove m88k support. gas/ * configure.ac: Remove m88k support. * config.in: Regenerate. * configure: Regenerate. ld/ * Makefile.am: Remove m88k support. * configure.host: Likewise. * configure.tgt: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * emulparams/m88kbcs.sh: Delete. * scripttempl/m88kbcs.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove i370 supportAlan Modra3-327/+5
include/ * elf/i370.h: Delete. * opcode/i370.h: Delete. bfd/ * Makefile.am: Remove i370 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * cpu-i370.c: Delete. * elf32-i370.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove i370 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * i370-dis.c: Delete. * i370-opc.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * readelf.c: Remove i370 support. * testsuite/binutils-all/objdump.exp: Likewise. gas/ * Makefile.am: Remove i370 support. * app.c: Likewise. * config/obj-elf.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Likewise. * testsuite/gas/elf/warn-2.s: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * config/tc-i370.c: Delete. * config/tc-i370.h: Delete. * doc/c-i370.texi: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove i370 support. * configure.tgt: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * emulparams/elf32i370.sh: Delete. * scripttempl/elfi370.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove h8500 supportAlan Modra3-59/+5
include/ * coff/h8500.h: Delete. * coff/internal.h: Remove h8500 support. bfd/ * Makefile.am: Remove h8500 support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-h8500.c: Delete. * cpu-h8500.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove h8500 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * h8500-dis.c: Delete. * h8500-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove h8500 support. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/obj-coff.h: Remove h8500 support. ld/ * Makefile.am: Remove h8500 support. * configure.tgt: Likewise. * emulparams/h8500.sh: Delete. * emulparams/h8500b.sh: Delete. * emulparams/h8500c.sh: Delete. * emulparams/h8500m.sh: Delete. * emulparams/h8500s.sh: Delete. * scripttempl/h8500.sc: Delete. * scripttempl/h8500b.sc: Delete. * scripttempl/h8500c.sc: Delete. * scripttempl/h8500m.sc: Delete. * scripttempl/h8500s.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove h8300-coff supportAlan Modra2-55/+4
include/ * coff/h8300.h: Delete. bfd/ * Makefile.am: Remove h8300-coff support. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * reloc16.c: Likewise. * targets.c: Likewise. * coff-h8300.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove h8300-coff support. gas/ * config/obj-coff.h: Remove h8300-coff support. * config/tc-h8300.c: Likewise. * config/tc-h8300.h: Likewise. * testsuite/gas/h8300/h8300.exp: Likewise. * testsuite/gas/h8300/branch-coff.s: Delete. * testsuite/gas/h8300/branchh-coff.s: Delete. * testsuite/gas/h8300/branchs-coff.s: Delete. * testsuite/gas/h8300/ffxx1-coff.d: Delete. * testsuite/gas/h8300/ffxx1-coff.s: Delete. * testsuite/gas/h8300/h8300-coff.exp: Delete. ld/ * Makefile.am: Remove h8300-coff support. * configure.tgt: Likewise. * testsuite/ld-h8300/h8300.exp: Likewise. * emulparams/h8300.sh: Delete. * emulparams/h8300h.sh: Delete. * emulparams/h8300hn.sh: Delete. * emulparams/h8300s.sh: Delete. * emulparams/h8300sn.sh: Delete. * emulparams/h8300sx.sh: Delete. * emulparams/h8300sxn.sh: Delete. * scripttempl/h8300.sc: Delete. * scripttempl/h8300h.sc: Delete. * scripttempl/h8300hn.sc: Delete. * scripttempl/h8300s.sc: Delete. * scripttempl/h8300sn.sc: Delete. * scripttempl/h8300sx.sc: Delete. * scripttempl/h8300sxn.sc: Delete. * testsuite/ld-h8300/relax-3-coff.d: Delete. * testsuite/ld-h8300/relax-4-coff.d: Delete. * testsuite/ld-h8300/relax-5-coff.d: Delete. * testsuite/ld-h8300/relax-6-coff.d: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove IEEE 695 object supportAlan Modra2-165/+4
include/ * ieee.h: Delete. bfd/ * Makefile.am: Remove IEEE 695 support. * archures.c: Likewise. * bfd.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfd.texinfo: Likewise. * doc/bfdint.texi: Likewise. * doc/bfdsumm.texi: Likewise. * section.c: Likewise. * targets.c: Likewise. * ieee.c: Delete. * libieee.h: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * Makefile.am: Remove IEEE 695 support. * budbg.h: Likewise. * doc/binutils.texi: Likewise. * makefile.vms: Likewise. * objcopy.c: Likewise. * objdump.c: Likewise. * rddbg.c: Likewise. * ieee.c: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/ * app.c: Remove IEEE 695 support. * symbols.c: Likewise. ld/ * ld.texinfo: Remove IEEE 695 support. * mri.c: Likewise.
2018-04-16Remove sony newsos3 supportAlan Modra2-4/+4
include/ * aout/host.h: Remove newsos3 support. bfd/ * Makefile.am: Remove newsos3 support. * aoutx.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * newsos3.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/copy-2.d: Remove newsos3 support. * testsuite/binutils-all/nm.exp: Likewise. ld/ * Makefile.am: Remove newsos3 support. * configure.tgt: Likewise. * emulparams/news.sh: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove netware supportAlan Modra9-1300/+11
include/ * nlm/ChangeLog-9315: Delete. * nlm/alpha-ext.h: Delete. * nlm/common.h: Delete. * nlm/external.h: Delete. * nlm/i386-ext.h: Delete. * nlm/internal.h: Delete. * nlm/ppc-ext.h: Delete. * nlm/sparc32-ext.h: Delete. bfd/ * Makefile.am: Remove netware support. * bfd-in.h: Likewise. * bfd.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfdint.texi: Likewise. * ecoff.c: Likewise. * targets.c: Likewise. * libnlm.h: Delete. * nlm-target.h: Delete. * nlm.c: Delete. * nlm32-alpha.c: Delete. * nlm32-i386.c: Delete. * nlm32-ppc.c: Delete. * nlm32-sparc.c: Delete. * nlm32.c: Delete. * nlm64.c: Delete. * nlmcode.h: Delete. * nlmswap.h: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * .gitignore: Remove netware support. * Makefile.am: Likewise. * configure.ac: Likewise. * doc/Makefile.am: Likewise. * doc/binutils.texi: Likewise. * testsuite/binutils-all/nm.exp: Likewise. * nlmconv.c: Delete. * nlmconv.h: Delete. * nlmheader.y: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/ * Makefile.am: Remove netware support. * config/tc-i386.c: Likewise. * configure.tgt: Likewise. * config/te-netware.h: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gprof/ * corefile.c: Remove netware support. ld/ * Makefile.am: Remove netware support. * configure.tgt: Likewise. * testsuite/ld-powerpc/powerpc.exp: Likewise. * emulparams/i386nw.sh: Delete. * emulparams/ppcnw.sh: Delete. * scripttempl/nw.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove tahoe supportAlan Modra2-232/+4
include/ * opcode/tahoe.h: Delete. bfd/ * archures.c: Remove tahoe support. * config.bfd: Likewise. * configure.ac: Likewise. * hosts/tahoe.h: Delete. * bfd-in2.h: Regenerate. * configure: Regenerate. opcodes/ * configure.ac: Remove tahoe support. * configure: Regenerate. binutils/ * testsuite/binutils-all/objdump.exp: Remove tahoe support. gprof/ * Makefile.am: Remove tahoe support. * corefile.c: Likewise. * tahoe.c: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate.
2018-04-11Remove i860, i960, bout and aout-adobe targetsAlan Modra12-1973/+16
Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-09PowerPC inline PLT call supportAlan Modra3-0/+13
In addition to the existing relocs we need two more to mark all instructions in the call sequence, PLTCALL on the call itself (plus the toc restore insn for ppc64), and PLTSEQ on others. All relocations in a particular sequence have the same symbol. Example ppc64 ELFv2 assembly: .reloc .,R_PPC64_PLTSEQ,puts std 2,24(1) addis 12,2,puts@plt@ha # .reloc .,R_PPC64_PLT16_HA,puts ld 12,puts@plt@l(12) # .reloc .,R_PPC64_PLT16_LO_DS,puts .reloc .,R_PPC64_PLTSEQ,puts mtctr 12 .reloc .,R_PPC64_PLTCALL,puts bctrl ld 2,24(1) Example ppc32 -fPIC assembly: addis 12,30,puts+32768@plt@ha # .reloc .,R_PPC_PLT16_HA,puts+0x8000 lwz 12,12,puts+32768@plt@l # .reloc .,R_PPC_PLT16_LO,puts+0x8000 .reloc .,R_PPC_PLTSEQ,puts+32768 mtctr 12 .reloc .,R_PPC_PLTCALL,puts+32768 bctrl Marking sequences like this allows the linker to convert them to nops and a direct call if the target symbol turns out to be local. When the call is __tls_get_addr, each relocation shown above is paired with an R_PPC*_TLSLD or R_PPC*_TLSGD reloc to additionally mark the sequence for possible TLS optimization. The TLSLD or TLSGD relocs are emitted first. include/ * elf/ppc.h (R_PPC_PLTSEQ, R_PPC_PLTCALL): Define. * elf/ppc64.h (R_PPC64_PLTSEQ, R_PPC64_PLTCALL): Define. bfd/ * elf32-ppc.c (ppc_elf_howto_raw): Add PLTSEQ and PLTCALL howtos. (is_plt_seq_reloc): New function. (ppc_elf_check_relocs): Handle PLTSEQ and PLTCALL relocs. (ppc_elf_tls_optimize): Handle inline plt call sequence. (ppc_elf_relax_section): Handle PLTCALL reloc. (ppc_elf_relocate_section): Nop out inline plt call sequence when resolving locally. * elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_PLTSEQ and R_PPC64_PLTCALL entries. Comment R_PPC64_TOCSAVE. (has_tls_get_addr_call): Correct comment. (is_branch_reloc): Add PLTCALL. (is_plt_seq_reloc): New function. (ppc64_elf_check_relocs): Handle PLT16_LO_DS reloc. Set has_tls_reloc for R_PPC64_TLSGD and R_PPC64_TLSLD. Create plt entry for R_PPC64_PLTCALL. (ppc64_elf_tls_optimize): Handle inline plt call sequence. (ppc_type_of_stub): Handle PLTCALL reloc. (toc_adjusting_stub_needed): Likewise. (ppc64_elf_relocate_section): Set "can_plt_call" for PLTCALL reloc insn. Nop out inline plt call sequence when resolving locally. Handle __tls_get_addr inline plt call optimization. elfcpp/ * powerpc.h (R_POWERPC_PLTSEQ, R_POWERPC_PLTCALL): Define. gold/ * powerpc.cc (Target_powerpc::Track_tls::maybe_skip_tls_get_addr_call): Handle inline plt sequence relocs. (Stub_table::Plt_stub_key::Plt_stub_key): Likewise. (Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Likewise. (Target_powerpc::Relocate::relocate): Likewise.
generated by cgit v1.1 at 2024-11-22 15:54:12 +0000