aboutsummaryrefslogtreecommitdiff
path: root/include/opcode/aarch64.h
AgeCommit message (Collapse)AuthorFilesLines
2021-07-01opcodes: constify aarch64_opcode_tablesMike Frysinger1-1/+1
This table is huge (~350k), so stop putting it into writable .data since it's only const data.
2021-03-31Use bool in includeAlan Modra1-20/+20
* bfdlink.h: Replace bfd_boolean with bool throughout. * coff/ecoff.h: Likewise. * coff/xcoff.h: Likewise. * dis-asm.h: Likewise. * elf/mmix.h: Likewise. * elf/xtensa.h: Likewise. * opcode/aarch64.h: Likewise, and FALSE with false, TRUE with true. * opcode/arc.h: Likewise. * opcode/mips.h: Likewise. * opcode/tic6x-opcode-table.h: Likewise. * opcode/tic6x.h: Likewise.
2021-03-31Remove bfd_stdint.hAlan Modra1-1/+1
If we require C99 for binutils then stdint.h is available. bfd/ * .gitignore: Delete bfd_stdint.h entry. * Makefile.am (bfdinclude_HEADERS): Delete bfd_stdint.h. (BUILD_HFILES, LOCAL_H_DEPS): Likewise. * bfd-in.h: Include stdint.h in place of bfd_stdint.h. * configure.ac: Don't invoke GCC_HEADER_STDINT. * configure.com: Don't create bfd_stdint.h. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * bfd-in2.h: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. binutils/ * coffdump.c: Include stdint.h in place of bfd_stdint.h. * dwarf.c: Likewise. gas/ * config/tc-aarch64.c: Include stdint.h in place of bfd_stdint.h. * config/tc-crx.c: Likewise. * config/tc-nds32.h: Likewise. include/ * cgen/basic-modes.h: Include stdint.h in place of bfd_stdint.h. * elf/nfp.h: Likewise. * opcode/aarch64.h: Likewise. * opcode/cgen.h: Likewise. * opcode/nfp.h: Likewise. * opcode/ppc.h: Likewise. ld/ * elf-hints-local.h: Include stdint.h in place of bfd_stdint.h. * emultempl/nds32elf.em: Likewise. * testsuite/ld-elf/mbind2b.c: Likewise. * testsuite/ld-elf/pr18718.c: Likewise. * testsuite/ld-elf/pr18720a.c: Likewise. * testsuite/ld-elf/pr25749-1.c: Likewise. * testsuite/ld-elf/pr25749-1a.c: Likewise. * testsuite/ld-elf/pr25749-1b.c: Likewise. * testsuite/ld-elf/pr25749-1c.c: Likewise. * testsuite/ld-elf/pr25749-1d.c: Likewise. * testsuite/ld-elf/pr25749-2.c: Likewise. * testsuite/ld-elf/pr25754-1a.c: Likewise. * testsuite/ld-elf/pr25754-2a.c: Likewise. * testsuite/ld-elf/pr25754-3a.c: Likewise. * testsuite/ld-elf/pr25754-4a.c: Likewise. * testsuite/ld-elf/pr25754-5a.c: Likewise. * testsuite/ld-elf/pr25754-6a.c: Likewise. opcodes/ * aarch64-dis.c: Include stdint.h in place of bfd_stdint.h. * aarch64-dis.h: Likewise. * aarch64-opc.c: Likewise. * avr-dis.c: Likewise. * csky-dis.c: Likewise. * nds32-asm.c: Likewise. * nds32-dis.c: Likewise. * nfp-dis.c: Likewise. * riscv-dis.c: Likewise. * s12z-dis.c: Likewise. * wasm32-dis.c: Likewise.
2021-03-29TRUE/FALSE simplificationAlan Modra1-7/+5
There is really no need to write code like "foo != 0 ? TRUE : FALSE" unless we had stupidly defined FALSE as something other than 0 or TRUE as something other than 1. The simpler "foo != 0" does just as well. Similarly "(condition == TRUE)" or "(condition == FALSE) can be simplified to "(condition)" and "(!condition)" respectively. I'll note that there is reason to use "integer_expression != 0" when assigning a bfd_boolean rather than the simpler "integer_expression", if you expect the variable to have 0 or 1 value. It's probably even a good idea to not rely on implicit conversion if bfd_boolean were _Bool. bfd/ * aoutx.h (aout_link_write_symbols): Don't cast boolean expression to bfd_boolean. * elf32-or1k.c (or1k_set_got_and_rela_sizes): Dont compare booleans against FALSE. * elf32-arc.c (name_for_global_symbol): Don't compare boolean to TRUE. (is_reloc_PC_relative): Don't use "boolean_condition ? TRUE : FALSE". (is_reloc_SDA_relative, is_reloc_for_GOT): Likewise. (is_reloc_for_PLT, is_reloc_for_TLS): Likewise. * elf32-arm.c (stm32l4xx_need_create_replacing_stub): Likewise. * elf32-nds32.c (insert_nds32_elf_blank): Likewise. * elf32-rx.c (rx_set_section_contents): Likewise. * elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Likewise. * elfxx-mips.c (_bfd_mips_elf_ignore_undef_symbol): Likewise. * mach-o.c (bfd_mach_o_read_command): Likewise. * targets.c (bfd_get_target_info): Likewise. binutils/ * dlltool.c (main): Don't use "boolean_condition ? TRUE : FALSE". * dwarf.c (read_and_display_attr_value): Likewise. (display_debug_str_offsets): Likewise. * objdump.c (dump_bfd): Likewise. * readelf.c (dump_section_as_strings): Likewise. (dump_section_as_bytes): Likewise. gas/ * atof-generic.c (FALSE, TRUE): Don't define. * config/obj-elf.h (FALSE, TRUE): Don't define. * config/obj-som.h (FALSE, TRUE): Don't define. * config/tc-hppa.h (FALSE, TRUE): Don't define. * config/tc-pdp11.c (FALSE, TRUE): Don't define. * config/tc-iq2000.h (obj_fix_adjustable): Delete. * config/tc-m32r.h (TC_FIX_ADJUSTABLE): Delete. * config/tc-mt.h (obj_fix_adjustable): Delete. * config/tc-nds32.h (TC_FIX_ADJUSTABLE): Delete. * config/tc-arc.c (parse_opcode_flags): Simplify boolean expression. (relaxable_flag, relaxable_operand, assemble_insn): Likewise. (tokenize_extregister): Likewise. * config/tc-csky.c (parse_opcode, get_operand_value): Likewise. (parse_operands_op, parse_operands, md_assemble): Likewise. * config/tc-d10v.c (build_insn): Likewise. * config/tc-score.c (s3_gen_insn_frag): Likewise. * config/tc-score7.c (s7_gen_insn_frag, s7_relax_frag): Likewise. * config/tc-tic6x.c (tic6x_update_features, md_assemble): Likewise. * config/tc-z80.c (emit_byte): Likewise. include/ * opcode/aarch64.h (alias_opcode_p): Simplify boolean expression. (opcode_has_alias, pseudo_opcode_p, optional_operand_p): Likewise. (opcode_has_special_coder): Likewise. ld/ * emultempl/aix.em (gld${EMULATION_NAME}_before_allocation): Simplify boolean expression. * lexsup.c (parse_args): Likewise. * pe-dll.c (pe_dll_id_target): Likewise. opcodes/ * aarch64-opc.c (vector_qualifier_p): Simplify boolean expression. (fp_qualifier_p, get_data_pattern): Likewise. (aarch64_get_operand_modifier_from_value): Likewise. (aarch64_extend_operator_p, aarch64_shift_operator_p): Likewise. (operand_variant_qualifier_p): Likewise. (qualifier_value_in_range_constraint_p): Likewise. (aarch64_get_qualifier_esize): Likewise. (aarch64_get_qualifier_nelem): Likewise. (aarch64_get_qualifier_standard_value): Likewise. (get_lower_bound, get_upper_bound): Likewise. (aarch64_find_best_match, match_operands_qualifier): Likewise. (aarch64_print_operand): Likewise. * aarch64-opc.h (operand_has_inserter, operand_has_extractor): Likewise. (operand_need_sign_extension, operand_need_shift_by_two): Likewise. (operand_need_shift_by_four, operand_maybe_stack_pointer): Likewise. * arm-dis.c (print_insn_mve, print_insn_thumb32): Likewise. * tic6x-dis.c (tic6x_check_fetch_packet_header): Likewise. (print_insn_tic6x): Likewise.
2021-03-29opcodes int vs bfd_boolean fixesAlan Modra1-1/+1
cpu/ * frv.opc (frv_is_branch_major, frv_is_float_major), (frv_is_media_major, frv_is_branch_insn, frv_is_float_insn), (frv_is_media_insn, spr_valid): Correct prototypes. include/ * opcode/aarch64.h (aarch64_opcode_encode): Correct prototype. opcodes/ * arc-dis.c (extract_operand_value): Correct NULL cast. * frv-opc.h: Regenerate.
2021-01-11aarch64: Remove support for CSREKyrylo Tkachov1-2/+0
This patch removes support for the CSRE extension from aarch64 gas/objdump. CSRE (FEAT_CSRE) is part of the Future Architecture Technologies program and at this time Arm is withdrawing this particular feature. The patch removes the system registers and the CSR PDEC instruction. gas/ChangeLog * NEWS: Remove CSRE. * config/tc-aarch64.c (parse_csr_operand): Delete. (parse_operands): Delete handling of AARCH64_OPND_CSRE_CSR. (aarch64_features): Remove csre. * doc/c-aarch64.texi: Remove CSRE. * testsuite/gas/aarch64/csre.d: Delete. * testsuite/gas/aarch64/csre-invalid.s: Likewise. * testsuite/gas/aarch64/csre-invalid.d: Likewise. * testsuite/gas/aarch64/csre_csr.s: Likewise. * testsuite/gas/aarch64/csre_csr.d: Likewise. * testsuite/gas/aarch64/csre_csr-invalid.s: Likewise. * testsuite/gas/aarch64/csre_csr-invalid.l: Likewise. * testsuite/gas/aarch64/csre_csr-invalid.d: Likewise. include/ChangeLog * opcode/aarch64.h (AARCH64_FEATURE_CSRE): Delete. (aarch64_opnd): Delete AARCH64_OPND_CSRE_CSR. opcodes/ChangeLog * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. * aarch64-opc.c (aarch64_print_operand): Delete handling of AARCH64_OPND_CSRE_CSR. * aarch64-tbl.h (aarch64_feature_csre): Delete. (CSRE): Likewise. (_CSRE_INSN): Likewise. (aarch64_opcode_table): Delete csr.
2021-01-01PR27116, Spelling errors found by Debian style checkerAlan Modra1-1/+1
PR 27116 bfd/ * xcofflink.c: Correct spelling in comments. binutils/ * coffgrok.c (do_type): Correct spelling of auxiliary in errors. * doc/binutils.texi: Correct grammar. * readelf.c (process_version_sections): Correct spelling of auxiliary in warning. * testsuite/binutils-all/vax/objdump.exp: Comment grammar fix. config/ * override.m4: Correct comment grammar. gas/ * config/tc-i386.c: Correct comment spelling. * config/tc-riscv.c: Likewise. * config/tc-s390.c: Correct comment grammar. * doc/c-i386.texi: Correct spelling. * doc/c-s390.texi: Correct grammar. gold/ * tilegx.cc: Correct comment spelling. gprof/ * README: Correct grammar. * gprof.texi: Likewise. include/ * coff/internal.h: Correct comment spelling. * coff/sym.h: Likewise. * opcode/aarch64.h: Likewise. ld/ * configure.tgt: Correct comment grammar. * emultempl/m68hc1xelf.em: Likewise. * ld.texi: Correct grammar.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-11-16aarch64: Extract Condition flag manipulation feature from Armv8.4-APrzemyslaw Wirkus1-1/+3
Extract FLAGM (Condition flag manipulation) feature from Armv8.4-A. Please note that FLAGM stays a Armv8.4-A feature but now can be assigned to other architectures or CPUs. New -march option +flagm is added to enable independently this feature.
2020-11-09aarch64: Limit Rt register number for LS64 load/store instructionsPrzemyslaw Wirkus1-0/+1
Atomic 64-byte load/store instructions limit Rt register number to values matching below condition (register <Xt> number must be even and <= 22): if Rt<4:3> == '11' || Rt<0> == '1' then UNDEFINED; This patch adds check if Rt fulfills above requirement. For more details regarding atomic 64-byte load/store instruction for Armv8.7 please refer to Arm A64 Instruction set documentation for Armv8-A architecture profile, see document page 157 for load instruction, and pages 414-418 for store instructions of [0]. [0]: https://developer.arm.com/docs/ddi0596/i
2020-11-06aarch64: Extract Pointer Authentication feature from Armv8.3-APrzemyslaw Wirkus1-0/+2
Extract PAC (Pointer Authentication) feature from Armv8.3-A. Please note that PAC stays a Armv8.3-A feature but now can be assigned to other architectures or CPUs.
2020-11-04aarch64: Update feature RAS system registersPrzemyslaw Wirkus1-2/+2
This patch: + updates RAS feature system registers with new RAS 1.1 regs. + extends RAS/RAS 1.1 support for all architecture levels of Armv8-A. Please note that early Armv8-A architectures do not officially support RAS extension. Rationale of the patch: To ease development so that user-friendly RAS system registers operands can be used. Certain use cases require developers to enable only more generic architecture (e.g. -march=armv8-a) during system development. Users must use RAS extension registers bearing in mind that system they use must support it. The RAS (Reliability, Availability, Serviceability) extension is a system-level extension that defines a number of system registers. RAS 1.1 (FEAT_RASv1p1) introduces five new system registers: ERXPFGCTL_EL1, ERXPFGCDN_EL1, ERXMISC2_EL1, ERXMISC3_EL1 and ERXPFGF_EL1. For details see [0]. [0] https://developer.arm.com/docs/ddi0595/i/
2020-11-03[PATCH][GAS] aarch64: Add atomic 64-byte load/store instructions for Armv8.7Przemyslaw Wirkus1-1/+3
Armv8.7 architecture introduces the "accelerator extension", aka load/store of 64 bytes. New atomic load/store instructions are: LD64B, ST64B, ST64BV and ST64BV0. This patch adds: + New feature +ls64 to -march command line. + New atomic load/store instructions associated with above feature. For more details regarding atomic 64-byte load/store instruction for Armv8.7 please refer to Arm A64 Instruction set documentation for Armv8-A architecture profile, see document page 157 for load instruction, and pages 414-418 for store instructions of [0]. [0]: https://developer.arm.com/docs/ddi0596/i
2020-10-28aarch64: Add CSR PDEC instructionPrzemyslaw Wirkus1-0/+2
This patch adds: + New feature +csre to -march command line. + New instruction CSR PDEC associated with CSRE feature. Please note that CSRE system registers were already upstreamed. This patch should finalize CSRE feature implementation. CSRE feature adds CSR PDEC (Decrements Call stack pointer by the size of a Call stack record) instruction. Although this instruction has operand (PDEC) it's instruction's only operand. PDEC forces instruction field Rt to be set to 0b1111. This results in fixed opcode of the instruction. gas/ChangeLog: 2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * NEWS: Update docs. * config/tc-aarch64.c (parse_csr_operand): New operand parser. (parse_operands): Call to CSR operand parser. * testsuite/gas/aarch64/csre_csr-invalid.d: New test. * testsuite/gas/aarch64/csre_csr-invalid.l: New test. * testsuite/gas/aarch64/csre_csr-invalid.s: New test. * testsuite/gas/aarch64/csre_csr.d: New test. * testsuite/gas/aarch64/csre_csr.s: New test. include/ChangeLog: 2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_CSRE): New -march feature. (enum aarch64_opnd): New CSR instruction field AARCH64_OPND_CSRE_CSR. opcodes/ChangeLog: 2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * aarch64-opc.c (aarch64_print_operand): CSR PDEC operand print-out. * aarch64-tbl.h (CSRE): New CSRE feature handler. (_CSRE_INSN): New CSRE instruction type. (struct aarch64_opcode): New 'csre' entry for a CSRE CLI feature. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2020-10-28aarch64: Add DSB instruction Armv8.7-a variantPrzemyslaw Wirkus1-0/+2
This patch adds new variant (nXS) of DSB memory barrier instruction available in Armv8.7-a. New nXS variant has different encoding in comparison with pre Armv8.7-a DSB memory barrier variant thus new instruction and new operand was added. DSB memory nXS barrier variant specifies the limitation on the barrier operation. Allowed values are: DSB SYnXS|#28 DSB ISHnXS|#24 DSB NSHnXS|#20 DSB OSHnXS|#16 Please note that till now, for barriers, barrier operation was encoded in 4-bit unsigned immediate CRm field (in the range 0 to 15). For DSB memory nXS barrier variant, barrier operation is a 5-bit unsigned assembly instruction immediate, encoded in instruction in two bits CRm<3:2>: CRm<3:2> #imm 00 16 01 20 10 24 11 28 This patch extends current AArch64 barrier instructions with above mapping. Notable patch changes include: + New DSB memory barrier variant encoding for Armv8.7-a. + New operand BARRIER_DSB_NXS for above instruction in order to distinguish between existing and new DSB instruction flavour. + New set of DSB nXS barrier options. + New instruction inserter and extractor map between instruction immediate 5-bit value and 2-bit CRm field of the instruction itself (see FLD_CRm_dsb_nxs). + Regeneration of aarch64-[asm|dis|opc]-2.c files. + Test cases to cover new instruction assembling and disassembling. For more details regarding DSB memory barrier instruction and its Armv8.7-a flavour please refer to Arm A64 Instruction set documentation for Armv8-A architecture profile, see document pages 132-133 of [0]. [0]: https://developer.arm.com/docs/ddi0596/i gas/ChangeLog: 2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * NEWS: Docs update. * config/tc-aarch64.c (parse_operands): Add AARCH64_OPND_BARRIER_DSB_NXS handler. (md_begin): Add content of aarch64_barrier_dsb_nxs_options to aarch64_barrier_opt_hsh hash. * testsuite/gas/aarch64/system-4-invalid.d: New test. * testsuite/gas/aarch64/system-4-invalid.l: New test. * testsuite/gas/aarch64/system-4-invalid.s: New test. * testsuite/gas/aarch64/system-4.d: New test. * testsuite/gas/aarch64/system-4.s: New test. include/ChangeLog: 2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_BARRIER_DSB_NXS. (aarch64_barrier_dsb_nxs_options): Declare DSB nXS options. opcodes/ChangeLog: 2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * aarch64-asm.c (aarch64_ins_barrier_dsb_nxs): New inserter. * aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter ins_barrier_dsb_nx. * aarch64-dis.c (aarch64_ext_barrier_dsb_nxs): New extractor. * aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor ext_barrier_dsb_nx. * aarch64-opc.c (aarch64_print_operand): New options table aarch64_barrier_dsb_nxs_options. * aarch64-opc.h (enum aarch64_field_kind): New field name FLD_CRm_dsb_nxs. * aarch64-tbl.h (struct aarch64_opcode): Define DSB nXS barrier Armv8.7-a instruction. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2020-10-28aarch64: Add basic support for armv8.7-a architecturePrzemyslaw Wirkus1-0/+3
This patch adds support for AArch64 -march=armv8.7-a command line option in GAS. Please note that this change ONLY extends -march= command line interface with a new "armv8.7-a" option. Architectural changes like new instructions will be added in following patches. gas/ChangeLog: 2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * NEWS: Docs update. * config/tc-aarch64.c (armv8.7-a): New arch. * doc/c-aarch64.texi (-march=armv8.7-a): Update docs. include/ChangeLog: 2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_7): New feature bitmask. (AARCH64_ARCH_V8_7): New arch feature set. opcodes/ChangeLog: 2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * aarch64-tbl.h (ARMV8_7): New macro.
2020-09-08aarch64: Add support for Armv8-R system registersAlex Coplan1-2/+4
This patch adds support for the system registers introduced in Armv8-R AArch64. gas/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * config/tc-aarch64.c (parse_sys_reg): Also pass sysreg name to validation function. (parse_sys_ins_reg): Likewise. (print_operands): Pass CPU features to aarch64_print_operand(). * testsuite/gas/aarch64/v8-r-bad-sysregs.d: New test. * testsuite/gas/aarch64/v8-r-bad-sysregs.l: Error output. * testsuite/gas/aarch64/v8-r-bad-sysregs.s: Input. * testsuite/gas/aarch64/v8-r-sysregs-need-arch.d: New test. * testsuite/gas/aarch64/v8-r-sysregs-need-arch.l: Error output. * testsuite/gas/aarch64/v8-r-sysregs.d: New test. * testsuite/gas/aarch64/v8-r-sysregs.s: Input for previous two tests. include/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * opcode/aarch64.h (aarch64_sys_ins_reg_supported_p): Also take system register name in order to simplify validation for v8-R. (aarch64_print_operand): Also take CPU feature set, as disassembly for system registers now depends on arch variant. opcodes/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * aarch64-dis.c (print_operands): Pass CPU features to aarch64_print_operand(). * aarch64-opc.c (aarch64_print_operand): Use CPU features to determine preferred disassembly of system registers. (SR_RNG): Refactor to use new SR_FEAT2 macro. (SR_FEAT2): New. (SR_V8_1_A): New. (SR_V8_4_A): New. (SR_V8_A): New. (SR_V8_R): New. (SR_EXPAND_ELx): New. (SR_EXPAND_EL12): New. (aarch64_sys_regs): Specify which registers are only on A-profile, add R-profile system registers. (ENC_BARLAR): New. (PRBARn_ELx): New. (PRLARn_ELx): New. (aarch64_sys_ins_reg_supported_p): Reject EL3 registers for Armv8-R AArch64.
2020-09-08aarch64: Add base support for Armv8-RAlex Coplan1-1/+7
This patch adds the basic infrastructure needed to support Armv8-R in AArch64 binutils: new command-line flags, new feature bits, a new BFD architecture, and support for differentiating between architecture variants in the disassembler. The new command-line options added by this patch are -march=armv8-r in GAS and -m aarch64:armv8-r in objdump. The disassembler support is necessary since Armv8-R AArch64 introduces a system register (VSCTLR_EL2) which shares an encoding with a different system register (TTBR0_EL2) in Armv8-A. This also allows us to use the correct preferred disassembly for the new DFB alias introduced in Armv8-R. bfd/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * archures.c (bfd_mach_aarch64_8R): New. * bfd-in2.h: Regenerate. * cpu-aarch64.c (bfd_aarch64_arch_v8_r): New. (bfd_aarch64_arch_ilp32): Update tail pointer. gas/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * config/tc-aarch64.c (aarch64_archs): Add armv8-r. * doc/c-aarch64.texi: Document -march=armv8-r. include/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_A): New. (AARCH64_FEATURE_V8_R): New. (AARCH64_ARCH_V8): Include new A-profile feature bit. (AARCH64_ARCH_V8_R): New. opcodes/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * aarch64-dis.c (arch_variant): New. (determine_disassembling_preference): Disassemble according to arch variant. (select_aarch64_variant): New. (print_insn_aarch64): Set feature set.
2020-08-10aarch64: Don't assert on long sysreg namesAlex Coplan1-0/+2
This patch fixes an assertion failure on long system register operands in the AArch64 backend. See the new testcase for an input which reproduces the issue. gas/ChangeLog: * config/tc-aarch64.c (parse_sys_reg): Don't assert when parsing a long system register. (parse_sys_ins_reg): Likewise. (sysreg_hash_insert): New. (md_begin): Use sysreg_hash_insert() to ensure all system registers are no longer than the maximum length at startup. * testsuite/gas/aarch64/invalid-sysreg-assert.d: New test. * testsuite/gas/aarch64/invalid-sysreg-assert.l: Error output. * testsuite/gas/aarch64/invalid-sysreg-assert.s: Input. include/ChangeLog: * opcode/aarch64.h (AARCH64_MAX_SYSREG_NAME_LEN): New.
2020-08-10[aarch64] GAS doesn't validate the architecture version for any tlbi ↵Przemyslaw Wirkus1-5/+3
registers. Fixed with this patch. * gas/config/tc-aarch64.c (parse_sys_reg): Call to aarch64_sys_ins_reg_supported_p instead of aarch64_sys_reg_supported_p. (parse_sys_ins_reg): Add aarch64_sys_reg_deprecated_p check. * include/opcode/aarch64.h (aarch64_sys_reg_deprecated_p): Functions paramaters changed. (aarch64_sys_reg_supported_p): Function removed. (aarch64_sys_ins_reg_supported_p): Functions paramaters changed. * opcodes/aarch64-opc.c (aarch64_print_operand): (aarch64_sys_reg_deprecated_p): Functions paramaters changed. (aarch64_sys_reg_supported_p): Function removed. (aarch64_sys_ins_reg_supported_p): Functions paramaters changed. (aarch64_sys_ins_reg_supported_p): Merged aarch64_sys_reg_supported_p into this function. * gas/testsuite/gas/aarch64/illegal-sysreg-5.d: New test. * gas/testsuite/gas/aarch64/illegal-sysreg-5.l: New test. * gas/testsuite/gas/aarch64/sysreg-5.s: New test.
2020-06-22aarch64: Normalize and sort feature bit macrosAlex Coplan1-64/+47
This patch normalizes and sorts the feature bit macros in include/opcode/aarch64.h such that it's easy to tell which bits are allocated and where it's safe to add new feature bits. Testing: * Testsuite run on aarch64-none-elf. include/ChangeLog: 2020-06-22 Alex Coplan <alex.coplan@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_SHA2): Normalize. (AARCH64_FEATURE_AES): Likewise. (AARCH64_FEATURE_V8_4): Likewise. (AARCH64_FEATURE_SM4): Likewise. (AARCH64_FEATURE_SHA3): Likewise. (AARCH64_FEATURE_V8): Likewise. (AARCH64_FEATURE_V8_2): Likewise. (AARCH64_FEATURE_V8_3): Likewise. (AARCH64_FEATURE_FP): Likewise. (AARCH64_FEATURE_SIMD): Likewise. (AARCH64_FEATURE_CRC): Likewise. (AARCH64_FEATURE_LSE): Likewise. (AARCH64_FEATURE_PAN): Likewise. (AARCH64_FEATURE_LOR): Likewise. (AARCH64_FEATURE_RDMA): Likewise. (AARCH64_FEATURE_V8_1): Likewise. (AARCH64_FEATURE_F16): Likewise. (AARCH64_FEATURE_RAS): Likewise. (AARCH64_FEATURE_PROFILE): Likewise. (AARCH64_FEATURE_SVE): Likewise. (AARCH64_FEATURE_RCPC): Likewise. (AARCH64_FEATURE_COMPNUM): Likewise. (AARCH64_FEATURE_DOTPROD): Likewise. (AARCH64_FEATURE_F16_FML): Likewise. (AARCH64_FEATURE_V8_5): Likewise. (AARCH64_FEATURE_V8_6): Likewise. (AARCH64_FEATURE_BFLOAT16): Likewise. (AARCH64_FEATURE_FLAGMANIP): Likewise. (AARCH64_FEATURE_FRINTTS): Likewise. (AARCH64_FEATURE_SB): Likewise. (AARCH64_FEATURE_PREDRES): Likewise. (AARCH64_FEATURE_CVADP): Likewise. (AARCH64_FEATURE_RNG): Likewise. (AARCH64_FEATURE_BTI): Likewise. (AARCH64_FEATURE_SCXTNUM): Likewise. (AARCH64_FEATURE_ID_PFR2): Likewise. (AARCH64_FEATURE_SSBS): Likewise. (AARCH64_FEATURE_MEMTAG): Likewise. (AARCH64_FEATURE_TME): Likewise. (AARCH64_FEATURE_I8MM): Likewise. (AARCH64_FEATURE_F32MM): Likewise. (AARCH64_FEATURE_F64MM): Likewise. (AARCH64_FEATURE_SVE2): Likewise. (AARCH64_FEATURE_SVE2_AES): Likewise. (AARCH64_FEATURE_SVE2_BITPERM): Likewise. (AARCH64_FEATURE_SVE2_SM4): Likewise. (AARCH64_FEATURE_SVE2_SHA3): Likewise.
2020-06-11[PATCH]: aarch64: Refactor representation of system registersAlex Coplan1-0/+4
Prior to this patch, the information describing the AArch64 system registers was separate from the information describing which system registers are available depending on the CPU feature set. Indeed, the latter was implemented as a separate function from the main table with the system register information. This patch remedies this situation and puts the feature information into the system register table itself. This has several advantages: * Having all the information described in one place is easier to maintain. * The logic to check whether a system register is supported now becomes trivial (and much more efficient). Since this patch ended up touching every line of the system register table, I took the opportunity to make the formatting more consistent and remove some redundant comments. Note that there is still more refactoring that could be done along the same lines here (e.g. with the TLB instructions) but this seemed like a reasonable first pass. Testing: * Regression tested an x64 -> aarch64-none-elf cross binutils. * Built aarch64-none-elf cross toolchain, checked newlib startup code still works. * Bootstrapped binutils on aarch64-linux-gnu, regression tested. * Built aarch64 kernel using new binutils with allyesconfig. OK for master? If so, I'll need a maintainer to commit on my behalf since I don't have write access. Thanks, Alex --- include/ChangeLog: 2020-06-11 Alex Coplan <alex.coplan@arm.com> * opcode/aarch64.h (aarch64_sys_reg): Add required features to struct describing system registers. opcodes/ChangeLog: 2020-06-11 Alex Coplan <alex.coplan@arm.com> * aarch64-opc.c (SYSREG): New macro for describing system registers. (SR_CORE): Likewise. (SR_FEAT): Likewise. (SR_RNG): Likewise. (SR_V8_1): Likewise. (SR_V8_2): Likewise. (SR_V8_3): Likewise. (SR_V8_4): Likewise. (SR_PAN): Likewise. (SR_RAS): Likewise. (SR_SSBS): Likewise. (SR_SVE): Likewise. (SR_ID_PFR2): Likewise. (SR_PROFILE): Likewise. (SR_MEMTAG): Likewise. (SR_SCXTNUM): Likewise. (aarch64_sys_regs): Refactor to store feature information in the table. (aarch64_sys_reg_supported_p): Collapse logic for system registers that now describe their own features. (aarch64_pstatefield_supported_p): Likewise.
2020-04-30AArch64: add GAS support for UDF instructionAlex Coplan1-0/+1
binutils * testsuite/binutils-all/aarch64/in-order-all.d: Update to use new disassembly. * testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise. ld/ * testsuite/ld-aarch64/erratum843419_tls_ie.d: Use udf in disassembly. * testsuite/ld-aarch64/farcall-b-section.d: Likewise. * testsuite/ld-aarch64/farcall-back.d: Likewise. * testsuite/ld-aarch64/farcall-bl-section.d: Likewise. gas/ * config/tc-aarch64.c (fix_insn): Implement for AARCH64_OPND_UNDEFINED. (parse_operands): Implement for AARCH64_OPND_UNDEFINED. * testsuite/gas/aarch64/udf.s: New. * testsuite/gas/aarch64/udf.d: New. * testsuite/gas/aarch64/udf-invalid.s: New. * testsuite/gas/aarch64/udf-invalid.l: New. * testsuite/gas/aarch64/udf-invalid.d: New. include * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_UNDEFINED. opcodes * aarch64-opc.h (enum aarch64_field_kind): Add FLD_imm16_2. * aarch64-opc.c (fields): Add entry for FLD_imm16_2. (operand_general_constraint_met_p): validate AARCH64_OPND_UNDEFINED. * aarch64-tbl.h (aarch64_opcode_table): Add udf instruction, entry for FLD_imm16_2. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-12-05Arm64: simplify Crypto arch extension handlingJan Beulich1-1/+3
This, at the assembler level, is just a "brace" feature covering both AES and SHA2. Hence there's no need for it to have a separate feature flag, freeing up a bit for future re-use. Along these lines there are also a number of dead definitions/variables in the opcode table file.
2019-11-07[binutils][aarch64] Matrix Multiply extension enablement [8/X]Matthew Malcomson1-1/+9
Hi, This patch is part of a series that adds support for Armv8.6-A (Matrix Multiply and BFloat16 extensions) to binutils. This patch introduces the Matrix Multiply (Int8, F32, F64) extensions to the aarch64 backend. The following instructions are added: {s/u}mmla, usmmla, {us/su}dot, fmmla, ld1rob, ld1roh, d1row, ld1rod, uzip{1/2}, trn{1/2}. Committed on behalf of Mihail Ionescu. gas/ChangeLog: 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> * config/tc-aarch64.c: Add new arch fetures to suppport the mm extension. (parse_operands): Add new operand. * testsuite/gas/aarch64/i8mm.s: New test. * testsuite/gas/aarch64/i8mm.d: New test. * testsuite/gas/aarch64/f32mm.s: New test. * testsuite/gas/aarch64/f32mm.d: New test. * testsuite/gas/aarch64/f64mm.s: New test. * testsuite/gas/aarch64/f64mm.d: New test. * testsuite/gas/aarch64/sve-movprfx-mm.s: New test. * testsuite/gas/aarch64/sve-movprfx-mm.d: New test. include/ChangeLog: 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_I8MM): New. (AARCH64_FEATURE_F32MM): New. (AARCH64_FEATURE_F64MM): New. (AARCH64_OPND_SVE_ADDR_RI_S4x32): New. (enum aarch64_insn_class): Add new instruction class "aarch64_misc" for instructions that do not require special handling. opcodes/ChangeLog: 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> * aarch64-tbl.h (aarch64_feature_i8mm_sve, aarch64_feature_f32mm_sve, aarch64_feature_f64mm_sve, aarch64_feature_i8mm, aarch64_feature_f32mm, aarch64_feature_f64mm): New feature sets. (INT8MATMUL_INSN, F64MATMUL_SVE_INSN, F64MATMUL_INSN, F32MATMUL_SVE_INSN, F32MATMUL_INSN): New macros to define matrix multiply instructions. (I8MM_SVE, F32MM_SVE, F64MM_SVE, I8MM, F32MM, F64MM): New feature set macros. (QL_MMLA64, OP_SVE_SBB): New qualifiers. (OP_SVE_QQQ): New qualifier. (INT8MATMUL_SVE_INSNC, F64MATMUL_SVE_INSNC, F32MATMUL_SVE_INSNC): New feature set for bfloat16 instructions to support the movprfx constraint. (aarch64_opcode_table): Support for SVE_ADDR_RI_S4x32. (aarch64_opcode_table): Define new instructions smmla, ummla, usmmla, usdot, sudot, fmmla, ld1rob, ld1roh, ld1row, ld1rod uzip{1/2}, trn{1/2}. * aarch64-opc.c (operand_general_constraint_met_p): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32. (aarch64_print_operand): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32. * aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode): Account for new instructions. * opcodes/aarch64-asm-2.c (aarch64_insert_operand): Support the new S4x32 operand. * aarch64-opc-2.c (aarch64_operands): Support the new S4x32 operand. Regression tested on arm-none-eabi. Is it ok for trunk? Regards, Mihail
2019-11-07[binutils][aarch64] Bfloat16 enablement [2/X]Matthew Malcomson1-5/+10
Hi, This patch is part of a series that adds support for Armv8.6-A (Matrix Multiply and BFloat16 extensions) to binutils. This patch introduces the following BFloat16 instructions to the aarch64 backend: bfdot, bfmmla, bfcvt, bfcvtnt, bfmlal[t/b], bfcvtn2. Committed on behalf of Mihail Ionescu. gas/ChangeLog: 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> 2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (vectype_to_qualifier): Special case the S_2H operand qualifier. * doc/c-aarch64.texi: Document bf16 and bf16mmla4 extensions. * testsuite/gas/aarch64/bfloat16.d: New test. * testsuite/gas/aarch64/bfloat16.s: New test. * testsuite/gas/aarch64/illegal-bfloat16.d: New test. * testsuite/gas/aarch64/illegal-bfloat16.l: New test. * testsuite/gas/aarch64/illegal-bfloat16.s: New test. * testsuite/gas/aarch64/sve-bfloat-movprfx.s: New test. * testsuite/gas/aarch64/sve-bfloat-movprfx.d: New test. include/ChangeLog: 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> 2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_BFLOAT16): New feature macros. (AARCH64_ARCH_V8_6): Include BFloat16 feature macros. (enum aarch64_opnd_qualifier): Introduce new operand qualifier AARCH64_OPND_QLF_S_2H. (enum aarch64_insn_class): Introduce new class "bfloat16". (BFLOAT16_SVE_INSNC): New feature set for bfloat16 instructions to support the movprfx constraint. opcodes/ChangeLog: 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> 2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_ins_reglane): Use AARCH64_OPND_QLF_S_2H in reglane special case. * aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode): Account for new instructions. * aarch64-dis.c (aarch64_ext_reglane): Use AARCH64_OPND_QLF_S_2H in reglane special case. * aarch64-opc.c (struct operand_qualifier_data): Add data for new AARCH64_OPND_QLF_S_2H qualifier. * aarch64-tbl.h (QL_BFDOT QL_BFDOT64, QL_BFDOT64I, QL_BFMMLA2, QL_BFCVT64, QL_BFCVTN64, QL_BFCVTN2_64): New qualifiers. (aarch64_feature_bfloat16, aarch64_feature_bfloat16_sve, aarch64_feature_bfloat16_bfmmla4): New feature sets. (BFLOAT_SVE, BFLOAT): New feature set macros. (BFLOAT_SVE_INSN, BFLOAT_BFMMLA4_INSN, BFLOAT_INSN): New macros to define BFloat16 instructions. (aarch64_opcode_table): Define new instructions bfdot, bfmmla, bfcvt, bfcvtnt, bfdot, bfdot, bfcvtn, bfmlal[b/t] bfcvtn2, bfcvt. Regression tested on aarch64-elf. Is it ok for trunk? Regards, Mihail
2019-11-07[gas][aarch64] Armv8.6-a option [1/X]Matthew Malcomson1-1/+3
Hi, This patch is part of a series that adds support for Armv8.6-A to binutils. This first patch adds the Armv8.6-A flag to binutils. No instructions are behind it at the moment. Commited on behalf of Mihail Ionescu. gas/ChangeLog: 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> 2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (armv8.6-a): New arch. * doc/c-aarch64.texi (armv8.6-a): Document new arch. include/ChangeLog: 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> 2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_6): New. (AARCH64_ARCH_V8_6): New. opcodes/ChangeLog: 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> 2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-tbl.h (ARMV8_6): New macro. Is it ok for trunk? Regards, Mihail
2019-07-01[gas][aarch64][SVE2] Fix pmull{t,b} requirement on SVE2-AESMatthew Malcomson1-1/+1
I had mistakenly given all variants of the new SVE2 instructions pmull{t,b} a dependency on the feature +sve2-aes. Only the variant specifying .Q -> .D sizes should have that restriction. This patch fixes that mistake and updates the testsuite to have extra tests (matching the given set of tests per line in aarch64-tbl.h that the rest of the SVE2 tests follow). We also add a line in the documentation of the command line to clarify how to enable `pmull{t,b}` of this larger size. This is needed because all other instructions gated under the `sve2-aes` architecture extension are marked in the instruction documentation by an `HaveSVE2AES` check while pmull{t,b} is gated under the `HaveSVE2PMULL128` check. Regtested targeting aarch64-linux. gas/ChangeLog: 2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com> * testsuite/gas/aarch64/illegal-sve2-aes.d: Update tests. * testsuite/gas/aarch64/illegal-sve2.l: Update tests. * doc/c-aarch64.texi: Add special note of pmull{t,b} instructions under the sve2-aes architecture extension. * testsuite/gas/aarch64/illegal-sve2.s: Add small size pmull{t,b} instructions. * testsuite/gas/aarch64/sve2.d: Add small size pmull{t,b} disassembly. * testsuite/gas/aarch64/sve2.s: Add small size pmull{t,b} instructions. include/ChangeLog: 2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): sve_size_013 renamed to sve_size_13. opcodes/ChangeLog: 2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Use new sve_size_13 icode to account for variant behaviour of pmull{t,b}. * aarch64-dis-2.c: Regenerate. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Use new sve_size_13 icode to account for variant behaviour of pmull{t,b}. * aarch64-tbl.h (OP_SVE_VVV_HD_BS): Add new qualifier. (OP_SVE_VVV_Q_D): Add new qualifier. (OP_SVE_VVV_QHD_DBS): Remove now unused qualifier. (struct aarch64_opcode): Split pmull{t,b} into those requiring AES and those not.
2019-05-09[binutils][aarch64] New SVE_SHLIMM_UNPRED_22 operand.Matthew Malcomson1-0/+1
New operand describes a shift-left immediate encoded in bits 22:20-19:18-16 where UInt(bits) - esize == shift. This operand is useful for instructions like sshllb. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_SHLIMM_UNPRED_22 operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_SHLIMM_UNPRED_22 operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_SHLIMM_UNPRED_22. (aarch64_print_operand): Add printing for SVE_SHLIMM_UNPRED_22. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHLIMM_UNPRED_22 operand.
2019-05-09[binutils][aarch64] New sve_size_tsz_bhs iclass.Matthew Malcomson1-0/+1
Add sve_size_tsz_bhs iclass needed for sqxtnb and similar instructions. This iclass encodes one of three variants by the most significant bit set in a 3-bit value where only one bit may be set. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_tsz_bhs iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_tsz_bhs iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_tsz_bhs iclass decode.
2019-05-09[binutils][aarch64] New SVE_Zm4_11_INDEX operand.Matthew Malcomson1-0/+1
This includes defining a new single bit field SVE_i2h at position 20. SVE_Zm4_11_INDEX handles indexed Zn registers where the index is encoded in bits 20:11 and the register is chosed from range z0-z15 in bits 19-16. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_Zm4_11_INDEX operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm4_11_INDEX operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_Zm4_11_INDEX. (aarch64_print_operand): Add printing for SVE_Zm4_11_INDEX. (fields): Handle SVE_i2h field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_i2h field. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm4_11_INDEX operand.
2019-05-09[binutils][aarch64] New sve_shift_tsz_bhsd iclass.Matthew Malcomson1-0/+1
This new iclass encodes the variant by which is the most significant bit used of bits 23-22:20-19, where those bits are usually part of a given constant operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_shift_tsz_bhsd iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_shift_tsz_bhsd iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_shift_tsz_bhsd iclass decode.
2019-05-09[binutils][aarch64] New SVE_SHRIMM_UNPRED_22 operand.Matthew Malcomson1-0/+2
Include a new iclass to extract the variant from the most significant 3 bits of this operand. Instructions such as rshrnb include a constant shift amount as an operand, where the most significant three bits of this operand determine what size elements the instruction is operating on. The new SVE_SHRIMM_UNPRED_22 operand denotes this constant encoded in bits 22:20-19:18-16 while the new sve_shift_tsz_hsd iclass denotes that the SVE qualifier is encoded in bits 22:20-19. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_SHRIMM_UNPRED_22 operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_SHRIMM_UNPRED_22 operand. (enum aarch64_insn_class): Add sve_shift_tsz_hsd iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-asm.c (aarch64_ins_sve_shrimm): (aarch64_encode_variant_using_iclass): Handle sve_shift_tsz_hsd iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_shift_tsz_hsd iclass decode. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_SHRIMM_UNPRED_22. (aarch64_print_operand): Add printing for SVE_SHRIMM_UNPRED_22. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHRIMM_UNPRED_22 operand.
2019-05-09[binutils][aarch64] New sve_size_013 iclass.Matthew Malcomson1-0/+1
Add sve_size_013 instruction class This new iclass handles instructions such as pmullb whose size specifier can only be encoded as 0, 1, or 3. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_013 iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_013 iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_013 iclass decode.
2019-05-09[binutils][aarch64] New sve_size_bh iclass.Matthew Malcomson1-0/+1
Add new iclass sve_size_bh to handle instructions that have two variants encoded with the SVE_sz field. This iclass behaves the same as the sve_size_sd iclass, but it has a nicer name for those instructions that choose between variants using the "B" and "H" size qualifiers. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_bh iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_bh iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_bh iclass decode.
2019-05-09[binutils][aarch64] New sve_size_sd2 iclass.Matthew Malcomson1-0/+1
Define new sve_size_sd2 iclass to distinguish between the two variants of ldnt1sb and ldnt1sh. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_sd2 iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_sd2 iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_sd2 iclass decode. * aarch64-opc.c (fields): Handle SVE_sz2 field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_sz2 field.
2019-05-09[binutils][aarch64] New SVE_ADDR_ZX operand.Matthew Malcomson1-0/+1
Add AARCH64_OPND_SVE_ADDR_ZX operand that allows a vector of addresses in a Zn register, offset by an Xm register. This is used with scatter/gather SVE2 instructions. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (REG_ZR): Macro specifying zero register. (parse_address_main): Account for new addressing mode [Zn.S, Xm]. (parse_operands): Handle new SVE_ADDR_ZX operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_ADDR_ZX operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_ADDR_ZX. (aarch64_print_operand): Add printing for SVE_ADDR_ZX. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_ADDR_ZX operand.
2019-05-09[binutils][aarch64] New SVE_Zm3_11_INDEX operand.Matthew Malcomson1-0/+1
Introduce new operand SVE_Zm3_11_INDEX that indicates a register between z0-z7 stored in bits 18-16 and an index stored in bits 20-19:11. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_Zm3_11_INDEX operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm3_11_INDEX operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_Zm3_11_INDEX. (aarch64_print_operand): Add printing for SVE_Zm3_11_INDEX. (fields): Handle SVE_i3l and SVE_i3h2 fields. * aarch64-opc.h (enum aarch64_field_kind): New SVE_i3l and SVE_i3h2 fields. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm3_11_INDEX operand.
2019-05-09[binutils][aarch64] New iclass sve_size_hsd2.Matthew Malcomson1-0/+1
Add "sve_size_hsd2" iclass decode that uses the new FLD_SVE_size field value to determine the variant of an instruction. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_hsd2 iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_hsd2 iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_hsd2 iclass decode. * aarch64-opc.c (fields): Handle SVE_size field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_size field.
2019-05-09[binutils][aarch64] Introduce SVE_IMM_ROT3 operand.Matthew Malcomson1-0/+1
New operand AARCH64_OPND_SVE_IMM_ROT3 handles a single bit rotate operand encoded at bit position 10. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_IMM_ROT3 operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_IMM_ROT3 operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_IMM_ROT3. (aarch64_print_operand): Add printing for SVE_IMM_ROT3. (fields): Handle SVE_rot3 field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_rot3 field. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_IMM_ROT3 operand.
2019-05-09[binutils][aarch64] SVE2 feature extension flags.Matthew Malcomson1-0/+7
Include all feature flag macros. The "sve2" extension that enables the core sve2 instructions. This also enables the sve extension, since sve is a requirement of sve2. Extra optional sve2 features are the bitperm, sm4, aes, and sha3 extensions. These are all given extra feature flags, "bitperm", "sve2-sm4", "sve2-aes", and "sve2-sha3" respectively. The sm4, aes, and sha3 extensions are explicitly marked as sve2 extensions to distinguish them from the corresponding NEON extensions. Rather than continue extending the current feature flag numbers, I used some bits that have been skipped. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c: Add command line architecture feature flags "sve2", "sve2-sm4", "sve2-aes", "sve2-sha3", "bitperm". * doc/c-aarch64.texi: Document new architecture feature flags. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_SVE2 AARCH64_FEATURE_SVE2_AES, AARCH64_FEATURE_SVE2_BITPERM, AARCH64_FEATURE_SVE2_SM4, AARCH64_FEATURE_SVE2_SHA3): New feature macros. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-tbl.h (aarch64_feature_sve2, aarch64_feature_sve2aes, aarch64_feature_sve2sha3, aarch64_feature_sve2sm4, aarch64_feature_sve2bitperm): New feature sets. (SVE2, SVE2_AES, SVE2_SHA3, SVE2_SM4, SVE2_BITPERM): New macros for feature set addresses. (SVE2_INSN, SVE2_INSNC, SVE2AES_INSN, SVE2SHA3_INSN, SVE2SM4_INSN, SVE2SM4_INSNC, SVE2BITPERM_INSN): New macros.
2019-05-01[BINUTILS, AArch64] Enable Transactional Memory ExtensionSudakshina Das1-1/+3
This patch enables the new Transactional Memory Extension added recently as part of Arm's new architecture technologies. We introduce a new optional extension "tme" to enable this. The following instructions are part of the extension: * tstart <Xt> * ttest <Xt> * tcommit * tcancel #<imm> The ISA for the above can be found here: https://developer.arm.com/docs/ddi0602/latest/base-instructions-alphabetic-order *** gas/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add case for AARCH64_OPND_TME_UIMM16. (aarch64_features): Add "tme". * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/tme-invalid.d: New test. * testsuite/gas/aarch64/tme-invalid.l: New test. * testsuite/gas/aarch64/tme-invalid.s: New test. * testsuite/gas/aarch64/tme.d: New test. * testsuite/gas/aarch64/tme.s: New test. *** include/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_TME): New. (enum aarch64_opnd): Add AARCH64_OPND_TME_UIMM16. *** opcodes/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Add case for AARCH64_OPND_TME_UIMM16. (aarch64_print_operand): Likewise. * aarch64-tbl.h (QL_IMM_NIL): New. (TME): New. (_TME_INSN): New. (struct aarch64_opcode): Add tstart, tcommit, ttest and tcancel.
2019-04-11[BINUTILS, AArch64, 2/2] Update Store Allocation Tag instructionsSudakshina Das1-0/+1
This patch updates the Store allocation tags instructions in Armv8.5-A Memory Tagging Extension. This is part of the changes that have been introduced recently in the 00bet10 release All of these instructions have an updated register operand (Xt -> <Xt|SP>) - STG <Xt|SP>, [<Xn|SP>, #<simm>] - STG <Xt|SP>, [<Xn|SP>, #<simm>]! - STG <Xt|SP>, [<Xn|SP>], #<simm> - STZG <Xt|SP>, [<Xn|SP>, #<simm>] - STZG <Xt|SP>, [<Xn|SP>, #<simm>]! - STZG <Xt|SP>, [<Xn|SP>], #<simm> - ST2G <Xt|SP>, [<Xn|SP>, #<simm>] - ST2G <Xt|SP>, [<Xn|SP>, #<simm>]! - ST2G <Xt|SP>, [<Xn|SP>], #<simm> - STZ2G <Xt|SP>, [<Xn|SP>, #<simm>] - STZ2G <Xt|SP>, [<Xn|SP>, #<simm>]! - STZ2G <Xt|SP>, [<Xn|SP>], #<simm> In order to accept <Rt|SP> a new operand type Rt_SP is introduced which has the same field as FLD_Rt but follows other semantics of Rn_SP. *** gas/ChangeLog *** 2019-04-11 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (process_omitted_operand): Add case for AARCH64_OPND_Rt_SP. (parse_operands): Likewise. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Update tests. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. *** include/ChangeLog *** 2019-04-11 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_Rt_SP. *** opcodes/ChangeLog *** 2019-04-11 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.c (aarch64_print_operand): Add case for AARCH64_OPND_Rt_SP. (verify_constraints): Likewise. * aarch64-tbl.h (QL_LDST_AT): Update to add SP qualifier. (struct aarch64_opcode): Update stg, stzg, st2g, stz2g instructions to accept Rt|SP as first operand. (AARCH64_OPERANDS): Add new Rt_SP. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2019-01-25AArch64: Remove ldgv and stgv instructions from Armv8.5-A Memory Tagging ↵Sudi Das1-2/+0
Extension. This patch is part of a series of patches to introduce a few changes to the Armv8.5-A Memory Tagging Extension. This patch removes the LDGV and STGV instructions. These instructions needed special infrastructure to support [base]! style for addressing mode. That is also removed now. Committed on behalf of Sudakshina Das. *** gas/ChangeLog *** * config/tc-aarch64.c (parse_address_main): Remove support for [base]! address expression. (parse_operands): Remove support for AARCH64_OPND_ADDR_SIMPLE_2. (warn_unpredictable_ldst): Remove support for ldstgv_indexed. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Remove tests for ldgv and stgv. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. *** include/ChangeLog *** * opcode/aarch64.h (enum aarch64_opnd): Remove AARCH64_OPND_ADDR_SIMPLE_2. (enum aarch64_insn_class): Remove ldstgv_indexed. *** opcodes/ChangeLog *** * aarch64-asm.c (aarch64_ins_addr_simple_2): Remove. * aarch64-asm.h (ins_addr_simple_2): Likeiwse. * aarch64-dis.c (aarch64_ext_addr_simple_2): Likewise. * aarch64-dis.h (ext_addr_simple_2): Likewise. * aarch64-opc.c (operand_general_constraint_met_p): Remove case for ldstgv_indexed. (aarch64_print_operand): Remove case for AARCH64_OPND_ADDR_SIMPLE_2. * aarch64-tbl.h (struct aarch64_opcode): Remove ldgv and stgv. (AARCH64_OPERANDS): Remove ADDR_SIMPLE_2. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-11-12[BINUTILS, AARCH64, 6/8] Add Tag getting instruction in Memory Tagging ExtensionSudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions which is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch add support to the Bulk Allocation Tag instructions from MTE. These are the following instructions added in this patch: - LDGV <Xt>, [<Xn|SP>]! - STGV <Xt>, [<Xn|SP>]! This needed a new kind of operand for the new addressing [<Xn|SP>]! since this has no offset and only takes a pre-indexed version. Hence AARCH64_OPND_ADDR_SIMPLE_2 and ldtdgv_indexed are introduced. (AARCH64_OPND_ADDR_SIMPLE fulfilled the no offset criteria but does not allow writeback). We also needed new encoding and decoding functions to be able to do the same. where <Xt> : Is the 64-bit destination GPR. <Xn|SP> : Is the 64-bit first source GPR or Stack pointer. *** include/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMPLE_2. (aarch64_insn_class): Add ldstgv_indexed. *** opcodes/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-asm.c (aarch64_ins_addr_simple_2): New. * aarch64-asm.h (ins_addr_simple_2): Declare the above. * aarch64-dis.c (aarch64_ext_addr_simple_2): New. * aarch64-dis.h (ext_addr_simple_2): Declare the above. * aarch64-opc.c (operand_general_constraint_met_p): Add case for AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed. (aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2. * aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv. (AARCH64_OPERANDS): Define ADDR_SIMPLE_2. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. *** gas/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add switch case for AARCH64_OPND_ADDR_SIMPLE_2 and allow [base]! for it. (warn_unpredictable_ldst): Exempt ldstgv_indexed for ldgv. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldgv and stgv. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise.
2018-11-12[BINUTILS, AARCH64, 4/8] Add Tag setting instructions in Memory Tagging ↵Sudakshina Das1-0/+8
Extension This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions which is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch add support to the Tag setting instructions from MTE which consists of the following instructions: - STG [<Xn|SP>, #<simm>] - STG [<Xn|SP>, #<simm>]! - STG [<Xn|SP>], #<simm> - STZG [<Xn|SP>, #<simm>] - STZG [<Xn|SP>, #<simm>]! - STZG [<Xn|SP>], #<simm> - ST2G [<Xn|SP>, #<simm>] - ST2G [<Xn|SP>, #<simm>]! - ST2G [<Xn|SP>], #<simm> - STZ2G [<Xn|SP>, #<simm>] - STZ2G [<Xn|SP>, #<simm>]! - STZ2G [<Xn|SP>], #<simm> - STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>] - STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]! - STGP <Xt>, <Xt2>, [<Xn|SP>], #<imm> where <Xn|SP> : Is the 64-bit GPR or Stack pointer. <simm> : Is the optional signed immediate offset, a multiple of 16 in the range -4096 to 4080, defaulting to 0. *** include/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13. (aarch64_opnd_qualifier): Add new AARCH64_OPND_QLF_imm_tag. *** opcodes/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.c (aarch64_opnd_qualifiers): Add new data for AARCH64_OPND_QLF_imm_tag. (operand_general_constraint_met_p): Add case for AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13. (aarch64_print_operand): Likewise. * aarch64-tbl.h (QL_LDST_AT, QL_STGP): New. (aarch64_opcode_table): Add stg, stzg, st2g, stz2g and stgp for both offset and pre/post indexed versions. (AARCH64_OPERANDS): Define ADDR_SIMM11 and ADDR_SIMM13. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. *** gas/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add switch case for AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13. (fix_insn): Likewise. (warn_unpredictable_ldst): Exempt STGP. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for stg, st2g, stzg, stz2g and stgp. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise.
2018-11-12[BINUTILS, AARCH64, 2/8] Add Tag generation instructions in Memory Tagging ↵Sudakshina Das1-0/+2
Extension This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions which is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch add support to the Tag generation instructions from MTE. These are the following instructions added in this patch: - IRG <Xd|SP>, <Xn|SP>{, Xm} - ADDG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2> - SUBG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2> - GMI <Xd>, <Xn|SP>, <Xm> where <Xd|SP> : Is the 64-bit destination GPR or Stack pointer. <Xn|SP> : Is the 64-bit source GPR or Stack pointer. <uimm6> : Is the unsigned immediate, a multiple of 16 in the range 0 to 1008. <uimm4> : Is the unsigned immediate, in the range 0 to 15. *** include/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10 as new enums. *** opcodes/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3. (OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New. * aarch64-opc.c (fields): Add entry for imm4_3. (operand_general_constraint_met_p): Add cases for AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10. (aarch64_print_operand): Likewise. * aarch64-tbl.h (QL_ADDG): New. (aarch64_opcode_table): Add addg, subg, irg and gmi. (AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10. * aarch64-asm.c (aarch64_ins_imm): Add case for operand_need_shift_by_four. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. *** gas/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add switch case for AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10. * testsuite/gas/aarch64/armv8_5-a-memtag.s: New. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.d: Likewise.
2018-11-12[BINUTILS, AARCH64, 1/8] Add support for Memory Tagging Extension for ARMv8.5-ASudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions. Memory Tagging Extension is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch adds the new command line option and the new feature macros. *** include/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_MEMTAG): New. *** opcodes/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_feature_memtag): New. (MEMTAG, MEMTAG_INSN): New. *** gas/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_features): Add "memtag" as a new option. * doc/c-aarch64.texi: Document the same.
generated by cgit v1.1 at 2025-03-07 04:40:46 +0000