aboutsummaryrefslogtreecommitdiff
path: root/include/opcode/ChangeLog
AgeCommit message (Collapse)AuthorFilesLines
2015-07-21[ARM] Support correctly spelled ARMv6KZ architecture namesMatthew Wahab1-0/+7
2015-07-20 Matthew Wahab <matthew.wahab@arm.com> gas/ * NEWS: Mention corrected spelling of armv6kz. * config/tc-arm.c (arm_cpus): Replace ARM_ARCH_V6ZK with ARM_ARCH_V6KZ. (arm_archs): Likewise. Also add "armv6kz" and "armv6kzt2". * doc/c-arm.texi: Replace "armv6zk" with "armv6kz". gas/testsuite * gas/arm/attr-march-armv6kz.d: New. * gas/arm/attr-march-armv6kzt2.d: New. include/opcode * arm.h (ARM_AEXT_V6ZK): Rename to ARM_AEXT_V6KZ. (ARM_AEXT_V6ZKT2): Rename to ARM_AEXT_V6KZT2. (ARM_ARCH_V6ZK): Rename to ARM_ARCH_V6KZ. (ARM_ARCH_V6ZKT2): Rename to ARM_ARCH_V6KZT2.
2015-07-03Remove ppc860, ppc750cl, ppc7450 insns from common ppc.Alan Modra1-0/+4
Back in the day support for these processors was added, we probably didn't want to waste PPC_OPCODE bits on minor variations. I've had a complaint that disassembly of mfspr/mtspr was wrong for power8. This patch fixes that problem. Note that since -m860/-m850/-m821 are new gas options enabling the mpc8xx specific mfspr/mtspr variants it is possible that this change will break some mpc8xx assembly code. ie. you might need to modify makefiles to pass -m860 to gas. include/opcode/ * ppc.h (PPC_OPCODE_750, PPC_OPCODE_7450, PPC_OPCODE_860): Define. opcodes/ * ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*. * ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries. Add PPC_OPCODE_7450 to 7450 entry. Add PPC_OPCODE_750 to 750cl entry. gas/ * config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860. * doc/c-ppc.texi (PowerPC-Opts): Likewise. gas/testsuite/ * gas/ppc/titan.d: Correct mfmcsrr0 disassembly.
2015-07-01Opcodes and assembler support for Nios II R2Sandra Loosemore1-0/+18
2015-07-01 Sandra Loosemore <sandra@codesourcery.com> Cesar Philippidis <cesar@codesourcery.com> gas/ * config/tc-nios2.c (nios2_min_align): New. (nop): Replace with.... (nop_r1, nop_r2, nop_r2_cdx, nop32, nop16): New. (nios2_align): Handle alignment on 2-byte boundaries when CDX instructions may be present. (s_nios2_align): Adjust reference to nop. (CDXBRANCH, IS_CDXBRANCH): New. (CDX_UBRANCH_SUBTYPE, CDX_CBRANCH_SUBTYPE): New. (nios2_relax_subtype_size): Handle 2-byte CDX branches. (nios2_relax_frag): Likewise. (md_convert_frag): Handle R2 encodings. (nios2_check_overflow): Check that low-order bits are zero before applying rightshift from howto. (nios2_check_overflow): Correct negative overflow calculation. (nios2_diagnose_overflow): Handle signed_immed12_overflow. Issue generic overflow messages for miscellaneous instruction formats. (md_apply_fix): Recognize new R2 relocations. For pc_relative relocations, store fixup in *valP. (nios2_reglist_mask, nios2_reglist_dir): New. (nios2_parse_reglist): New. (nios2_parse_base_register): New. (nios2_assemble_expression): Handle constant expressions designated by BFD_RELOC_NONE. (nios2_assemble_reg3): New. (nios2_assemble_arg_c): Handle R2 instruction formats. (nios2_assemble_arg_d): Likewise. (nios2_assemble_arg_s): Likewise. (nios2_assemble_arg_t): Likewise. (nios2_assemble_arg_D): New. (nios2_assemble_arg_S): New. (nios2_assemble_arg_T): New. (nios2_assemble_arg_i): Handle R2 instruction formats. (nios2_assemble_arg_I): New. (nios2_assemble_arg_u): Handle R2 instruction formats. (nios2_assemble_arg_U): New. (nios2_assemble_arg_V): New. (nios2_assemble_arg_W): New. (nios2_assemble_arg_X): New. (nios2_assemble_arg_Y): New. (nios2_assemble_arg_o): Handle R2 instruction formats. (nios2_assemble_arg_O): New. (nios2_assemble_arg_P): New. (nios2_assemble_arg_j): Handle R2 instruction formats. (nios2_assemble_arg_k): New. (nios2_assemble_arg_l): Handle R2 instruction formats. (nios2_assemble_arg_m): Likewise. (nios2_assemble_arg_M): New. (nios2_assemble_arg_N): New. (nios2_assemble_arg_e): New. (nios2_assemble_arg_f): New. (nios2_assemble_arg_g): New. (nios2_assemble_arg_h): New. (nios2_assemble_arg_R): New. (nios2_assemble_arg_B): New. (nios2_assemble_args): Handle new argument letters. (nios2_consume_arg): Likewise. (nios2_translate_pseudo_insn): Avoid dereferencing null pointer in error message. (nios2_ps_insn_info_structs): Add nop.n. (output_ubranch): Handle CDX branches. (output_cbranch): Likewise. (output_call): Handle R2 encodings. (output_movia): Likewise. (md_begin): Initialize nios2_min_align. (md_assemble): Align to nios2_min_align. Adjust nios2_min_align if a 16-bit instruction is seen. (nios2_cons_align): Use appropriate nop pattern. include/opcode/ * nios2.h (enum iw_format_type): Add R2 formats. (enum overflow_type): Add signed_immed12_overflow and enumeration_overflow for R2. (struct nios2_opcode): Document new argument letters for R2. (REG_3BIT, REG_LDWM, REG_POP): Define. (includes): Include nios2r2.h. (nios2_r2_opcodes, nios2_num_r2_opcodes): Declare. (nios2_r2_asi_n_mappings, nios2_num_r2_asi_n_mappings): Declare. (nios2_r2_shi_n_mappings, nios2_num_r2_shi_n_mappings): Declare. (nios2_r2_andi_n_mappings, nios2_num_r2_andi_n_mappings): Declare. (nios2_r2_reg3_mappings, nios2_num_r2_reg3_mappings): Declare. (nios2_r2_reg_range_mappings, nios2_num_r2_reg_range_mappings): Declare. * nios2r2.h: New file. opcodes/ * nios2-dis.c (nios2_extract_opcode): New. (nios2_disassembler_state): New. (nios2_find_opcode_hash): Use mach parameter to select correct disassembler state. (nios2_print_insn_arg): Extend to support new R2 argument letters and formats. (print_insn_nios2): Check for 16-bit instruction at end of memory. * nios2-opc.c (nios2_builtin_regs): Add R2 register attributes. (NIOS2_NUM_OPCODES): Rename to... (NIOS2_NUM_R1_OPCODES): This. (nios2_r2_opcodes): New. (NIOS2_NUM_R2_OPCODES): New. (nios2_num_r2_opcodes): New. (nios2_r2_asi_n_mappings, nios2_num_r2_asi_n_mappings): New. (nios2_r2_shi_n_mappings, nios2_num_r2_shi_n_mappings): New. (nios2_r2_andi_n_mappings, nios2_num_r2_andi_n_mappings): New. (nios2_r2_reg3_mappings, nios2_num_r2_reg3_mappings): New. (nios2_r2_reg_range_mappings, nios2_num_r2_reg_range_mappings): New.
2015-06-19Allow for optional operands with non-zero default values.Peter Bergner1-0/+5
ISA 2.07 (ie, POWER8) added the rfebb instruction which takes one operand with the value of either a 0 or 1. It also defines an extended mnemonic with no operands (ie, "rfebb") that is supposed to be equivalent to "rfebb 1". I implemented rfebb's lone operand with PPC_OPERAND_OPTIONAL, but the problem is, optional operands that are ommitted always default to the value 0, which is wrong in this case. I have added support for allowing non-zero default values by adding an additional flag PPC_OPERAND_OPTIONAL_VALUE that specifies that the default operand value to be used is stored in the SHIFT field of the operand field immediately following this one. This fixes the rfebb issue. I also fixed the mftb and mfcr instructions so they use the same mechanism. This allows us to flag invalid uses of mfcr where we explicitly pass in a zero FXM value, like the use in a2.[sd]. include/opcode/ * ppc.h (PPC_OPERAND_OPTIONAL_VALUE): New. (ppc_optional_operand_value): New inline function. opcodes/ * ppc-dis.h (skip_optional_operands): Use ppc_optional_operand_value. * ppc-opc.c (FXM4): Add non-zero optional value. (TBR): Likewise. (SXL): Likewise. (insert_fxm): Handle new default operand value. (extract_fxm): Likewise. (insert_tbr): Likewise. (extract_tbr): Likewise. gas/ * config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value. Allow for optional operands without insert functions. gas/testsuite/ * gas/ppc/power8.d: Fixup rfebb test results. * gas/ppc/a2.s: Fix invalid mfcr test. * gas/ppc/a2.d: Likewise.
2015-06-04[AArch64] Add support for ARMv8.1 command line optionMatthew Wahab1-0/+4
2015-06-03[ARM] Support for ARMv8.1 command line optionMatthew Wahab1-0/+9
2015-06-03 Matthew Wahab <matthew.wahab@arm.com> gas/ * config/tc-arm.c (arm_archs): Add "armv8.1-a". * doc/c-arm.texi (ARM Options, -march): Add "armv8.1-a". * NEWS: Mention ARMv8.1 support. include/opcode/ * arm.h (FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_1): New. (ARM_ARCH_V8_1A): New. (ARM_ARCH_V8_1A_FP): New. (ARM_ARCH_V8_1A_SIMD): New. (ARM_ARCH_V8_1A_CRYPTOV1): New. (ARM_FEATURE_CORE): New.
2015-06-02[ARM] Add support for ARMv8.1 PAN extensionMatthew Wahab1-0/+5
2015-06-02[ARM] Rework CPU feature selection in the disassemblerMatthew Wahab1-0/+4
include/opcode/ * arm.h (ARM_FEATURE_ALL): New. opcodes/ * arm-dis.c (select_arm_features): Rework to avoid used of redefined macros.
2015-06-02[AArch64] Support for ARMv8.1a Adv.SIMD instructionsMatthew Wahab1-0/+4
2015-06-02 Matthew Wahab <matthew.wahab@arm.com> gas/ * config/tc-aarch64.c (aarch64_features): Add "rdma". * doc/c-aarch64.texi (AArch64 Extensions): Add "rdma". gas/testsuite/ * rdma-directive.d: New. * rdma.d: New. * rdma.s: New. include/opcode/ * aarch64.h (AARCH64_FEATURE_RDMA): New. opcode/ * aarch64-tbl.h (aarch64_feature_rdma): New. (RDMA): New. (aarch64_opcode_table): Add "sqrmlah" and "sqrdmlsh" instructions. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate.
2015-06-02[AArch64] Support for ARMv8.1a Limited Ordering Regions extensionMatthew Wahab1-0/+4
2015-06-02 Matthew Wahab <matthew.wahab@arm.com> include/ * aarch64.h (AARCH64_FEATURE_LOR): New. opcodes/ * aarch64-tbl.h (aarch64_feature_lor): New. (LOR): New. (aarch64_opdocde_table): Add "ldlar", "ldlarb", "ldlarh", "stllr", "stllrb", "stllrh". * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ * config/tc-aarch64.c (aarch64_features): Add "lor". * doc/c-aarch64.c (Aarch64 Extensions): Add "lor" to list of architecture extensions. gas/testsuite/ * lor-directive.d: New. * lor.d: New. * lor.s: New.
2015-06-01[AArch64][libopcode] Add support for PAN architecture extensionMatthew Wahab1-0/+6
The ARMv8.1 architecture introduced the Privileged Access Never extension. This adds a processor state field PSTATE.PAN which can be accessed using the MRS/MSR instructions. This patch adds support for the PAN architecture feature and processor state field to libopcode. include/opcode 2015-06-01 Matthew Wahab <matthew.wahab@arm.com> * aarch64.h (AARCH64_FEATURE_PAN): New. (aarch64_sys_reg_supported_p): Declare. (aarch64_pstatefield_supported_p): Declare. opcodes/ 2015-06-01 Matthew Wahab <matthew.wahab@arm.com> * aarch64-opc.c (F_ARCHEXT): New. (aarch64_sys_regs): Add "pan". (aarch64_sys_reg_supported_p): New. (aarch64_pstatefields): Add "pan". (aarch64_pstatefield_supported_p): New.
2015-04-30Make RL78 disassembler and simulator respect ISA for mul/divDJ Delorie1-0/+5
[gas] * config/rl78-defs.h (rl78_isa_g10): New. (rl78_isa_g13): New. (rl78_isa_g14): New. * config/rl78-parse.y (ISA_G10): New. (ISA_G13): New. (ISA_G14): New. (MULHU, MULH, MULU, DIVHU, DIVWU, MACHU, MACH): Use them. * config/tc-rl78.c (rl78_isa_g10): New. (rl78_isa_g13): New. (rl78_isa_g14): New. [gdb] * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to rl78_decode_opcode [include] * dis-asm.h (print_insn_rl78_g10): New. (print_insn_rl78_g13): New. (print_insn_rl78_g14): New. (rl78_get_disassembler): New. * opcode/rl78.h (RL78_Dis_Isa): New. (rl78_decode_opcode): Add ISA parameter. [opcodes] * disassemble.c (disassembler): Choose suitable disassembler based on E_ABI. * rl78-decode.opc (rl78_decode_opcode): Take ISA parameter. Use it to decode mul/div insns. * rl78-decode.c: Regenerate. * rl78-dis.c (print_insn_rl78): Rename to... (print_insn_rl78_common): ...this, take ISA parameter. (print_insn_rl78): New. (print_insn_rl78_g10): New. (print_insn_rl78_g13): New. (print_insn_rl78_g14): New. (rl78_get_disassembler): New. [sim] * rl78/cpu.c (g14_multiply): New. * rl78/cpu.h (g14_multiply): New. * rl78/load.c (rl78_load): Decode ISA completely. * rl78/main.c (main): Expand -M to include other ISAs. * rl78/rl78.c (decode_opcode): Decode based on ISA. * rl78/trace.c (rl78_disasm_fn): New. (sim_disasm_init): Reset it. (sim_disasm_one): Get correct disassembler for ISA.
2015-03-24Extend arm_feature_set struct to provide more bitsTerry Guo1-0/+17
gas/ChangeLog: 2015-03-24 Terry Guo <terry.guo@arm.com> * config/tc-arm.c (no_cpu_selected): Use new macro to compare features. (parse_psr): Likewise. (do_t_mrs): Likewise. (do_t_msr): Likewise. (static const arm_feature_set arm_ext_*): Defined with new macros. (static const arm_feature_set arm_cext_*): Likewise. (static const arm_feature_set fpu_fpa_ext_*): Likewise. (static const arm_feature_set fpu_vfp_ext_*): Likewise. (deprecated_coproc_regs): Likewise. (UL_BARRIER): Likewise. (barrier_opt_names): Likewise. (arm_cpus): Likewise. (arm_extensions): Likewise. include/opcode/ChangeLog: 2015-03-24 Terry Guo <terry.guo@arm.com> * arm.h (arm_feature_set): Extended to provide more available * bits. (ARM_ANY): Updated to follow above new definition. (ARM_CPU_HAS_FEATURE): Likewise. (ARM_CPU_IS_ANY): Likewise. (ARM_MERGE_FEATURE_SETS): Likewise. (ARM_CLEAR_FEATURE): Likewise. (ARM_FEATURE): Likewise. (ARM_FEATURE_COPY): New macro. (ARM_FEATURE_EQUAL): Likewise. (ARM_FEATURE_ZERO): Likewise. (ARM_FEATURE_CORE_EQUAL): Likewise. (ARM_FEATURE_LOW): Likewise. (ARM_FEATURE_CORE_LOW): Likewise. (ARM_FEATURE_CORE_COPROC): Likewise. opcodes/ChangeLog: 2015-03-24 Terry Guo <terry.guo@arm.com> * arm-dis.c (opcode32): Updated to use new arm feature struct. (opcode16): Likewise. (coprocessor_opcodes): Replace bit with feature struct. (neon_opcodes): Likewise. (arm_opcodes): Likewise. (thumb_opcodes): Likewise. (thumb32_opcodes): Likewise. (print_insn_coprocessor): Likewise. (print_insn_arm): Likewise. (select_arm_features): Follow new feature struct.
2015-02-19Wrap a few opcodes headers in extern "C" for C++Pedro Alves1-0/+9
These are sufficient to link an --enable-targets=all GDB build in C++ mode, on x86_64 Fedora 20. include/opcode/ 2015-02-19 Pedro Alves <palves@redhat.com> * cgen.h [__cplusplus]: Wrap in extern "C". * msp430-decode.h [__cplusplus]: Likewise. * nios2.h [__cplusplus]: Likewise. * rl78.h [__cplusplus]: Likewise. * rx.h [__cplusplus]: Likewise. * tilegx.h [__cplusplus]: Likewise. opcodes/ 2015-02-19 Pedro Alves <palves@redhat.com> * microblaze-dis.h [__cplusplus]: Wrap in extern "C".
2015-01-28FT32 initial supportAlan Modra1-0/+4
FT32 is a new 32-bit RISC core developed by FTDI for embedded applications. * configure.ac: Add FT32 support. * configure: Regenerate. bfd/ * Makefile.am: Add FT32 files. * archures.c (enum bfd_architecture): Add bfd_arch_ft32. (bfd_mach_ft32): Define. (bfd_ft32_arch): Declare. (bfd_archures_list): Add bfd_ft32_arch. * config.bfd: Handle FT32. * configure.ac: Likewise. * cpu-ft32.c: New file. * elf32-ft32.c: New file. * reloc.c (BFD_RELOC_FT32_10, BFD_RELOC_FT32_20, BFD_RELOC_FT32_17, BFD_RELOC_FT32_18): Define. * targets.c (_bfd_target_vector): Add ft32_elf32_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * readelf.c: Add FT32 support. gas/ * Makefile.am: Add FT32 files. * config/tc-ft32.c: New file. * config/tc-ft32.h: New file. * configure.tgt: Add FT32 support. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/testsuite/ * gas/ft32/ft32.exp: New file. * gas/ft32/insn.d: New file. * gas/ft32/insn.s: New file. include/ * dis-asm.h (print_insn_ft32): Declare. include/elf/ * common.h (EM_FT32): Define. * ft32.h: New file. include/opcode/ * ft32.h: New file. ld/ * Makefile.am: Add FT32 files. * configure.tgt: Handle FT32 target. * emulparams/elf32ft32.sh: New file. * scripttempl/ft32.sc: New file. * Makefile.in: Regenerate. opcodes/ * Makefile.am: Add FT32 files. * configure.ac: Handle FT32. * disassemble.c (disassembler): Call print_insn_ft32. * ft32-dis.c: New file. * ft32-opc.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2015-01-16S/390: Add support for IBM z13.Andreas Krebbel1-0/+4
- 32 128 bit vector registers (overlapping with the existing 16 64 bit floating point registers) - vector double instructions - vector integer instructions - scalar vector instructions (allowing to have more floating point registers for scalar operations) - vector string instructions gas/ChangeLog: * config/tc-s390.c (struct pd_reg): Remove. (pre_defined_registers): Remove. (REG_NAME_CNT): Remove. (reg_name_search): Calculate the register number instead of doing a lookup. (register_name, tc_s390_regname_to_dw2regnum): Adopt to the new reg_name_search signature. (s390_parse_cpu): Support the new arch string z13. (s390_insert_operand): Support for vector registers with the extra field for the fifth bit of each vector register operand. (md_gather_operand): Adjust to the new handling of optional parameters. * doc/as.texinfo: Document the z13 cpu string. gas/testsuite/ChangeLog: * gas/s390/esa-g5.d: Add a variant without the optional operand. * gas/s390/esa-g5.s: Likewise. * gas/s390/esa-z9-109.d: Likewise. * gas/s390/esa-z9-109.s: Likewise. * gas/s390/zarch-z9-109.d: Likewise. * gas/s390/zarch-z9-109.s: Likewise. * gas/s390/zarch-z10.d: For variants with a zero optional argument it is not dumped by objdump anymore. * gas/s390/zarch-zEC12.d: Likewise. * gas/s390/zarch-z13.d: New file. * gas/s390/zarch-z13.s: New file. * gas/s390/s390.exp: Run the test for the z13 files. include/opcode/ChangeLog: * s390.h (s390_opcode_cpu_val): Add S390_OPCODE_Z13. ld/testsuite/ChangeLog: * ld-s390/tlsbin.dd: The nopr register operand is optional and not printed if 0 anymore. opcodes/ChangeLog: * s390-dis.c (s390_extract_operand): Support vector register operands. (s390_print_insn_with_opcode): Support new operands types and add new handling of optional operands. * s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove and include opcode/s390.h instead. (struct op_struct): New field `flags'. (insertOpcode, insertExpandedMnemonic): New parameter `flags'. (dumpTable): Dump flags. (main): Parse flags from the s390-opc.txt file. Add z13 as cpu string. * s390-opc.c: Add new operands types, instruction formats, and instruction masks. (s390_opformats): Add new formats for .insn. * s390-opc.txt: Add new instructions.
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+5
2014-12-27Limit moxie sto/ldo offsets to 16 bitsAnthony Green1-0/+5
2014-12-06Add Visium support to opcodesEric Botcazou1-0/+4
include/ * dis-asm.h (print_insn_visium): Declare. include/opcode/ * visium.h: New file. opcodes/ * configure.ac: Add Visium support. * configure: Regenerate. * Makefile.am (TARGET_LIBOPCODES_CFILES): Add visium-dis.c and visium-opc.c. * Makefile.in: Regenerate. * disassemble.c (ARCH_visium): Define if ARCH_all. (disassembler): Deal with bfd_arch_visium if ARCH_visium. * visium-dis.c: New file. * visium-opc.c: Likewise. * po/POTFILES.in: Regenerate.
2014-11-28Remove broken nios2 assembler dwim support.Sandra Loosemore1-0/+6
2014-11-28 Sandra Loosemore <sandra@codesourcery.com> include/opcode/ * nios2.h (NIOS2_INSN_ADDI, NIOS2_INSN_ANDI): Delete. (NIOS2_INSN_ORI, NIOS2_INSN_XORI): Delete. (NIOS2_INSN_OPTARG): Renumber. opcodes/ * nios2-opc.c (nios2_r1_opcodes): Remove deleted attributes from descriptors. gas/ * config/tc-nios2.c (can_evaluate_expr, get_expr_value): Delete. (output_addi, output_andi, output_ori, output_xori): Delete. (md_assemble): Remove calls to deleted functions. gas/testsuite/ * gas/nios2/nios2.exp: Make "movi" a list test. * gas/nios2/movi.s: Adjust comments, add another case. * gas/nios2/movi.l: New. * gas/nios2/movi.d: Delete.
2014-11-06Add mach parameter to nios2_find_opcode_hash.Sandra Loosemore1-0/+5
2014-11-06 Sandra Loosemore <sandra@codesourcery.com> include/opcode/ * nios2.h (nios2_find_opcode_hash): Add mach parameter to declaration. Fix obsolete comment. opcodes/ * nios2-dis.c (nios2_find_opcode_hash): Add mach parameter. (nios2_disassemble): Adjust call to nios2_find_opcode_hash. gas/ * config/tc-nios2.c (nios2_diagnose_overflow): Adjust call to nios2_find_opcode_hash.
2014-10-23Refactoring/cleanup of nios2 opcodes and assembler code.Sandra Loosemore1-0/+50
2014-10-23 Sandra Loosemore <sandra@codesourcery.com> include/opcode/ * nios2.h (enum iw_format_type): New. (struct nios2_opcode): Update comments. Add size and format fields. (NIOS2_INSN_OPTARG): New. (REG_NORMAL, REG_CONTROL, REG_COPROCESSOR): New. (struct nios2_reg): Add regtype field. (GET_INSN_FIELD, SET_INSN_FIELD): Delete. (IW_A_LSB, IW_A_MSB, IW_A_SZ, IW_A_MASK): Delete. (IW_B_LSB, IW_B_MSB, IW_B_SZ, IW_B_MASK): Delete. (IW_C_LSB, IW_C_MSB, IW_C_SZ, IW_C_MASK): Delete. (IW_IMM16_LSB, IW_IMM16_MSB, IW_IMM16_SZ, IW_IMM16_MASK): Delete. (IW_IMM26_LSB, IW_IMM26_MSB, IW_IMM26_SZ, IW_IMM26_MASK): Delete. (IW_OP_LSB, IW_OP_MSB, IW_OP_SZ, IW_OP_MASK): Delete. (IW_OPX_LSB, IW_OPX_MSB, IW_OPX_SZ, IW_OPX_MASK): Delete. (IW_SHIFT_IMM5_LSB, IW_SHIFT_IMM5_MSB): Delete. (IW_SHIFT_IMM5_SZ, IW_SHIFT_IMM5_MASK): Delete. (IW_CONTROL_REGNUM_LSB, IW_CONTROL_REGNUM_MSB): Delete. (IW_CONTROL_REGNUM_SZ, IW_CONTROL_REGNUM_MASK): Delete. (OP_MASK_OP, OP_SH_OP): Delete. (OP_MASK_IOP, OP_SH_IOP): Delete. (OP_MASK_IRD, OP_SH_IRD): Delete. (OP_MASK_IRT, OP_SH_IRT): Delete. (OP_MASK_IRS, OP_SH_IRS): Delete. (OP_MASK_ROP, OP_SH_ROP): Delete. (OP_MASK_RRD, OP_SH_RRD): Delete. (OP_MASK_RRT, OP_SH_RRT): Delete. (OP_MASK_RRS, OP_SH_RRS): Delete. (OP_MASK_JOP, OP_SH_JOP): Delete. (OP_MASK_IMM26, OP_SH_IMM26): Delete. (OP_MASK_RCTL, OP_SH_RCTL): Delete. (OP_MASK_IMM5, OP_SH_IMM5): Delete. (OP_MASK_CACHE_OPX, OP_SH_CACHE_OPX): Delete. (OP_MASK_CACHE_RRS, OP_SH_CACHE_RRS): Delete. (OP_MASK_CUSTOM_A, OP_SH_CUSTOM_A): Delete. (OP_MASK_CUSTOM_B, OP_SH_CUSTOM_B): Delete. (OP_MASK_CUSTOM_C, OP_SH_CUSTOM_C): Delete. (OP_MASK_CUSTOM_N, OP_SH_CUSTOM_N): Delete. (OP_<insn>, OPX_<insn>, OP_MATCH_<insn>, OPX_MATCH_<insn>): Delete. (OP_MASK_<insn>, OP_MASK): Delete. (GET_IW_A, GET_IW_B, GET_IW_C, GET_IW_CONTROL_REGNUM): Delete. (GET_IW_IMM16, GET_IW_IMM26, GET_IW_OP, GET_IW_OPX): Delete. Include nios2r1.h to define new instruction opcode constants and accessors. (nios2_builtin_opcodes): Rename to nios2_r1_opcodes. (bfd_nios2_num_builtin_opcodes): Rename to nios2_num_r1_opcodes. (bfd_nios2_num_opcodes): Rename to nios2_num_opcodes. (NUMOPCODES, NUMREGISTERS): Delete. * nios2r1.h: New file. opcodes/ * nios2-opc.c (nios2_builtin_regs): Add regtype field initializers. (nios2_builtin_opcodes): Rename to nios2_r1_opcodes. Use new MATCH_R1_<insn> and MASK_R1_<insn> macros in initializers. Add size and format initializers. Merge 'b' arguments into 'j'. (NIOS2_NUM_OPCODES): Adjust definition. (bfd_nios2_num_builtin_opcodes): Rename to nios2_num_r1_opcodes. (nios2_opcodes): Adjust. (bfd_nios2_num_opcodes): Rename to nios2_num_opcodes. * nios2-dis.c (INSNLEN): Update comment. (nios2_hash_init, nios2_hash): Delete. (OPCODE_HASH_SIZE): New. (nios2_r1_extract_opcode): New. (nios2_disassembler_state): New. (nios2_r1_disassembler_state): New. (nios2_init_opcode_hash): Add state parameter. Adjust to use it. (nios2_find_opcode_hash): Use state object. (bad_opcode): New. (nios2_print_insn_arg): Add op parameter. Use it to access format. Remove 'b' case. (nios2_disassemble): Remove special case for nop. Remove hard-coded instruction size. gas/ * config/tc-nios2.c (nios2_insn_infoS): Add constant_bits field. (nios2_arg_infoS, nios2_arg_hash, nios2_arg_lookup): Delete. (nios2_control_register_arg_p): Delete. (nios2_coproc_reg): Delete. (nios2_relax_frag): Remove hard-coded instruction size. (md_convert_frag): Use new insn accessor macros. (nios2_diagnose_overflow): Remove hard-coded instruction size. (md_apply_fix): Likewise. (bad_opcode): New. (nios2_parse_reg): New. (nios2_assemble_expression): Remove prev_reloc parameter. Adjust uses and callers. (nios2_assemble_arg_c): New. (nios2_assemble_arg_d): New. (nios2_assemble_arg_s): New. (nios2_assemble_arg_t): New. (nios2_assemble_arg_i): New. (nios2_assemble_arg_u): New. (nios2_assemble_arg_o): New. (nios2_assemble_arg_j): New. (nios2_assemble_arg_l): New. (nios2_assemble_arg_m): New. (nios2_assemble_args): New. (nios2_assemble_args_dst): Delete. (nios2_assemble_args_tsi): Delete. (nios2_assemble_args_tsu): Delete. (nios2_assemble_args_sto): Delete. (nios2_assemble_args_o): Delete. (nios2_assemble_args_is): Delete. (nios2_assemble_args_m): Delete. (nios2_assemble_args_s): Delete. (nios2_assemble_args_tis): Delete. (nios2_assemble_args_dc): Delete. (nios2_assemble_args_cs): Delete. (nios2_assemble_args_ds): Delete. (nios2_assemble_args_ldst): Delete. (nios2_assemble_args_none): Delete. (nios2_assemble_args_dsj): Delete. (nios2_assemble_args_d): Delete. (nios2_assemble_args_b): Delete. (nios2_arg_info_structs): Delete. (NIOS2_NUM_ARGS): Delete. (nios2_consume_arg): Remove insn parameter. Use new macros. Don't check register arguments here. Remove 'b' case. (nios2_consume_separator): Move check for missing separators to... (nios2_parse_args): ...here. Remove special case for optional arguments. (output_insn): Avoid using hard-coded insn size. (output_ubranch): Likewise. (output_cbranch): Likewise. (output_call): Use new macros. (output_addi): Likewise. (output_ori): Likewise. (output_xori): Likewise. (output_movia): Likewise. (md_begin): Remove nios2_arg_info_structs initialization. (md_assemble): Initialize constant_bits field. Use nios2_parse_args instead of looking up parse function in hash table. gdb/ * nios2-tdep.c (nios2_analyze_prologue): Use new instruction field accessors and constants from nios2 opcodes update. (nios2_get_next_pc): Likewise.
2014-10-17opcodes, elf: annotate instructions with HWCAP2_VIS3B.Jose E. Marchesi1-0/+4
This patch annotates the following SPARC instructions as VIS3B instructions: ldx *, %efsr, fpadd64, fpsub64, fpcmpule8, fpcmpune8, fpcmpugt8, fpcmpueq8. It also improves the documentation of the VIS3B capability in several headers. Tested in sparc64-unknown-linux-gnu and sparc-unknown-linux-gnu. No visible regressions. opcodes/ChangeLog: 2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-opc.c (sparc-opcodes): Annotate several instructions with the HWCAP2_VIS3B hwcap. include/opcodes/ChangeLog: 2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc.h (HWCAP2_VIS3B): Documentation improved. include/elf/ChangeLog: 2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc.h (ELF_SPARC_HWCAP2_VIS3B): Documentation improved.
2014-10-09This is a series of patches that add support for the SPARC M7 cpu toJose E. Marchesi1-0/+20
binutils. They were discussed and approved here: https://sourceware.org/ml/binutils/2014-10/msg00038.html
2014-09-16NDS32/opcodes: Add audio ISA extension and modify the disassemble implemnt.Kuan-Lin Chen1-0/+4
First, add nds32 audio ISA extension including opcodes and registers. Second, redesign the disassemble implement. The original disassemble decode instruction opcode using switch-case. It is hard to synchronize when adding new instructions. Therefore, the new implement reuses nds32_opcodes to dump the instructions.
2014-09-15Add support for MIPS R6.Andrew Bennett1-0/+20
bfd/ * aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6. * archures.c (bfd_architecture): Likewise. * bfd-in2.h (bfd_architecture): Likewise. (bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. * cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6. * elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2 R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. * elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. * elfn32-mips.c: Likewise. * elfxx-mips.c (MIPSR6_P): New define. (mipsr6_exec_plt_entry): New array. (hi16_reloc_p): Add support for R_MIPS_PCHI16. (lo16_reloc_p): Add support for R_MIPS_PCLO16. (aligned_pcrel_reloc_p): New function. (mips_elf_relocation_needs_la25_stub): Add support for relocs: R_MIPS_PC21_S2 and R_MIPS_PC26_S2. (mips_elf_calculate_relocation): Add support for relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6. (mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16. (_bfd_mips_elf_check_relocs): Add support for relocs: R_MIPS_PC21_S2 and R_MIPS_PC26_S2. (_bfd_mips_elf_relocate_section): Add a check for unaligned pc relative relocs. (_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6 plt entry. (mips_set_isa_flags): Add support for mips32r6 and mips64r6. (_bfd_mips_elf_print_private_bfd_data): Likewise. (mips_32bit_flags_p): Add support for mips32r6. * libbfd.h (bfd_reloc_code_real_names): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. * reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. binutils/ * readelf.c (get_machine_flags): Add support for mips32r6 and mips64r6. elfcpp/ * mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants. gas/ * config/tc-mips.c (mips_nan2008): New static global. (mips_flag_nan2008): Removed. (LL_SC_FMT): New define. (COP12_FMT): Updated. (ISA_IS_R6): New define. (ISA_HAS_64BIT_REGS): Add mips64r6. (ISA_HAS_DROR): Likewise. (ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6. (ISA_HAS_ROR): Likewise. (ISA_HAS_ODD_SINGLE_FPR): Likewise. (ISA_HAS_MXHC1): Likewise. (hilo_interlocks): Likewise. (md_longopts): Likewise. (ISA_HAS_LEGACY_NAN): New define. (options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6. (mips_ase): Add field rem_rev. (mips_ases): Updated to add which ISA an ASE was removed in. (mips_isa_rev): Add support for mips32r6 and mips64r6. (mips_check_isa_supports_ase): Add support to check if an ASE has been removed in the specified MIPS ISA revision. (validate_mips_insn): Skip '-' character. (macro_build): Likewise. (mips_check_options): Prevent R6 working with fp32, mips16, micromips, or branch relaxation. (file_mips_check_options): Set R6 floating point registers to 64 bit. Also deal with the nan2008 option. (limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. (match_check_prev_operand): New static function. (match_same_rs_rt_operand): New static function. (match_non_zero_reg_operand): New static function. (match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. (insns_between): Added case to deal with forbidden slots. (append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2 and BFD_RELOC_MIPS_26_PCREL_S2. (match_insn): Add support for operands -A, -B, +' and +". Also skip '-' character. (mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo. (md_parse_option): Add support for mips32r6 and mips64r6. Also update the nan option handling. (md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2. (mips_force_relocation): Prevent forced relaxation for MIPS r6. (md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (s_mipsset): Add support for mips32r6 and mips64r6. (s_nan): Update to support the new nan2008 framework. (tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (mips_elf_final_processing): Updated to use the mips_nan2008. (mips_cpu_info_table): Add entries for mips32r6 and mips64r6. (macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref macros for R6. (mips_fix_adjustable): Make PC relative R6 relocations relative to the symbol and not the section. * configure.ac: Add support for mips32r6 and mips64r6. * configure: Regenerate. * doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line options. * doc/as.texinfo: Likewise. gas/testsuite/ * gas/mips/24k-triple-stores-1.s: If testing for r6 prevent non-supported instructions from being tested. * gas/mips/24k-triple-stores-2.s: Likewise. * gas/mips/24k-triple-stores-3.s: Likewise. * gas/mips/24k-triple-stores-6.s: Likewise. * gas/mips/beq.s: Likewise. * gas/mips/eva.s: Likewise. * gas/mips/ld-zero-3.s: Likewise. * gas/mips/mips32-cp2.s: Likewise. * gas/mips/mips32.s: Likewise. * gas/mips/mips4.s: Likewise. * gas/mips/add.s: Don't test the add instructions if r6, and add padding. * gas/mips/add.d: Check for a triple dot not a nop at the end of the disassembly output. * gas/mips/micromips@add.d: Likewise. * gas/mips/mipsr6@24k-branch-delay-1.d: New file. * gas/mips/mipsr6@24k-triple-stores-1.d: New file. * gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file. * gas/mips/mipsr6@24k-triple-stores-2.d: New file. * gas/mips/mipsr6@24k-triple-stores-3.d: New file. * gas/mips/mipsr6@24k-triple-stores-6.d: New file. * gas/mips/mipsr6@add.d: New file. * gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file. * gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file. * gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file. * gas/mips/mipsr6@beq.d: New file. * gas/mips/mipsr6@bge.d: New file. * gas/mips/mipsr6@bgeu.d: New file. * gas/mips/mipsr6@blt.d: New file. * gas/mips/mipsr6@bltu.d: New file. * gas/mips/mipsr6@branch-misc-1.d: New file. * gas/mips/mipsr6@branch-misc-2-64.d: New file. * gas/mips/mipsr6@branch-misc-2pic-64.d: New file. * gas/mips/mipsr6@branch-misc-4-64.d: New file. * gas/mips/mipsr6@cache.d: New file. * gas/mips/mipsr6@eva.d: New file. * gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file. * gas/mips/mipsr6@jal-svr4pic.d: New file. * gas/mips/mipsr6@ld-zero-2.d: New file. * gas/mips/mipsr6@ld-zero-3.d: New file. * gas/mips/mipsr6@loc-swap-dis.d: New file. * gas/mips/mipsr6@mips32-cp2.d: New file. * gas/mips/mipsr6@mips32-imm.d: New file. * gas/mips/mipsr6@mips32.d: New file. * gas/mips/mipsr6@mips32r2.d: New file. * gas/mips/mipsr6@mips4-fp.d: New file. * gas/mips/mipsr6@mips4-fp.l: New file. * gas/mips/mipsr6@mips4-fp.s: New file. * gas/mips/mipsr6@mips4.d: New file. * gas/mips/mipsr6@mips5-fp.d: New file. * gas/mips/mipsr6@mips5-fp.l: New file. * gas/mips/mipsr6@mips5-fp.s: New file. * gas/mips/mipsr6@mips64.d: New file. * gas/mips/mipsr6@msa-branch.d: New file. * gas/mips/mipsr6@msa.d: New file. * gas/mips/mipsr6@pref.d: New file. * gas/mips/mipsr6@relax-swap3.d: New file. * gas/mips/r6-64-n32.d: New file. * gas/mips/r6-64-n64.d: New file. * gas/mips/r6-64-removed.l: New file. * gas/mips/r6-64-removed.s: New file. * gas/mips/r6-64.s: New file. * gas/mips/r6-attr-none-double.d: New file. * gas/mips/r6-n32.d: New file. * gas/mips/r6-n64.d: New file. * gas/mips/r6-removed.l: New file. * gas/mips/r6-removed.s: New file. * gas/mips/r6.d: New file. * gas/mips/r6.s: New file. * gas/mips/mipsr6@mips32-dsp.d: New file. * gas/mips/mipsr6@mips32-dspr2.d: New file. * gas/mips/mipsr6@mips32r2-ill.l: New file. * gas/mips/mipsr6@mips32r2-ill.s: New file. * gas/mips/cache.s: Add r6 instruction varients. * gas/mips/mips.exp: Add support for the mips32r6 and mips64r6 architectures. Also prevent non r6 supported tests from running. Finally, add in support for running the new r6 tests. (run_dump_test_arch): Add support for mipsr6 tests. (run_list_test_arch): Add support for using files of the form arch@testname.l . include/elf/ * mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (E_MIPS_ARCH_32R6): New define. (E_MIPS_ARCH_64R6): New define. include/opcode/ * mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6 instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; (mips_check_prev_operand): New struct. (INSN2_FORBIDDEN_SLOT): New define. (INSN_ISA32R6): New define. (INSN_ISA64R6): New define. (INSN_UPTO32R6): New define. (INSN_UPTO64R6): New define. (mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6. (ISA_MIPS32R6): New define. (ISA_MIPS64R6): New define. (CPU_MIPS32R6): New define. (CPU_MIPS64R6): New define. (cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6. ld/ * ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6. opcodes/ * mips-dis.c (mips_arch_choices): Add entries for mips32r6 and mips64r6. (parse_mips_dis_option): Allow MSA and virtualization support for mips64r6. (mips_print_arg_state): Add fields dest_regno and seen_dest. (mips_seen_register): New function. (print_insn_arg): Refactored code to use mips_seen_register function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out the register rather than aborting. (print_insn_args): Add length argument. Add code to correctly calculate the instruction address for pc relative instructions. (validate_insn_args): New static function. (print_insn_mips): Prevent jalx disassembling for r6. Use validate_insn_args. (print_insn_micromips): Use validate_insn_args. all the arguments are valid. * mips-formats.h (PREV_CHECK): New define. * mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; (RD_pc): New define. (FS): New define. (I37): New define. (I69): New define. (mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded MIPS R6 instructions from MIPS R2 instructions.
2014-09-03[PATCH/AArch64] Implement LSE featureJiong Wang1-0/+8
2014-09-03 Jiong Wang <jiong.wang@arm.com> gas/ * config/tc-aarch64.c (parse_operands): Recognize PAIRREG. (aarch64_features): Add entry for lse extension. include/opcode/ * aarch64.h (AARCH64_FEATURE_LSE): New feature added. (aarch64_opnd): Add AARCH64_OPND_PAIRREG. (aarch64_insn_class): Add lse_atomic. (F_LSE_SZ): New field added. (opcode_has_special_coder): Recognize F_LSE_SZ. opcode/ * aarch64-tbl.h (QL_R4NIL): New qualifiers. (aarch64_feature_lse): New feature added. (LSE): New Added. (aarch64_opcode_table): New LSE instructions added. Improve descriptions for ldarb/ldarh/ldar. (aarch64_opcode_table): Describe PAIRREG. * aarch64-opc.h (aarch64_field_kind): Add FLD_lse_sz. * aarch64-opc.c (fields): Add entry for F_LSE_SZ. (aarch64_print_operand): Recognize PAIRREG. (operand_general_constraint_met_p): Check reg pair constraints for CASP instructions. * aarch64-dis.c (aarch64_ext_regno_pair): New extractor for paired reg. (do_special_decoding): Recognize F_LSE_SZ. * aarch64-asm.c (do_special_encoding): Recognize F_LSE_SZ. gas/testsuite/ * gas/aarch64/lse-atomic.d: New. * gas/aarch64/lse-atomic.s: Likewise. * gas/aarch64/illegal-lse.d: Likewise. * gas/aarch64/illegal-lse.l: Likewise. * gas/aarch64/illegal-lse.s: Likewise. * gas/aarch64/diagnostic.s: Check processor feature detect for lse instruction. * gas/aarch64/diagnostic.l: Likewise.
2014-08-26MIPS: Make the CODE10 operand code consistent between ISAsMaciej W. Rozycki1-0/+5
This change moves the microMIPS 10-bit uninterpreted immediate code embedded at bits 25..16 in the SYSCALL, WAIT, SDBBP and HYPCALL instructions from `B' over to `+J' which is the operand code used in the standard MIPS instruction set for a similar code embedded at bits 20..11, currently used by HYPCALL only in that set. opcodes/ * micromips-opc.c (decode_micromips_operand): Rename `B' to `+J'. (micromips_opcodes): Use "+J" in place of "B" for "hypcall", "sdbbp", "syscall" and "wait". include/opcode/ * mips.h: Document the move of `MICROMIPSOP_*_CODE10' from `B' over to `+J'.
2014-07-29[MIPS] Rename COPROC related macrosMatthew Fortune1-0/+7
gas/ * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout. include/opcode/ * mips.h (INSN_LOAD_COPROC_DELAY): Rename to... (INSN_LOAD_COPROC): New define. (INSN_COPROC_MOVE_DELAY): Rename to... (INSN_COPROC_MOVE): New define. opcodes/ * micromips-opc.c (COD): Rename throughout to... (CM): New define, update to use INSN_COPROC_MOVE. (LCD): Rename throughout to... (LC): New define, update to use INSN_LOAD_COPROC. * mips-opc.c: Likewise.
2014-07-01Add support for the AVR Tiny series of microcontrollers.Barney Stratford1-0/+12
* archures.c: add avrtiny architecture for avr target. * bfd-in2.h: Regenerate. * cpu-avr.c (arch_info_struct): add avrtiny arch info. * elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16 added for 16 bit LDS/STS instruction of avrtiny arch. (avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to BFD_RELOC_AVR_LDS_STS_16. (bfd_elf_avr_final_write_processing): select machine number avrtiny arch. (elf32_avr_object_p): set machine number for avrtiny arch. * libbfd.h: Regenerate. * reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc. * config/tc-avr.c (mcu_types): Add avrtiny arch. Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20 and attiny40. (md_show_usage): Add avrtiny arch in usage message. (avr_operand): validate and issue error for invalid register for avrtiny. add new reloc exp for 16 bit lds/sts instruction. (md_apply_fix): check 16 bit lds/sts operand for out of range and encode. (md_assemble): check ISA for arch and issue diagnostic. * include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number. (R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number. * include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA. (AVR_ISA_2xxxa): define ISA without LPM. (AVR_ISA_AVRTINY): define avrtiny arch ISA. Add doc for contraint used in 16 bit lds/sts. Adjust ISA group for icall, ijmp, pop and push. Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints. * opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts. (print_insn_avr): do not select opcode if insn ISA is avrtiny and machine is not avrtiny. * Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source. (eavrtiny.c): add rules for avrtiny emulation source. * Makefile.in: Regenerate. * configure.tgt: Add avrtiny to avr target emulations. * scripttempl/avrtiny.sc: New file. linker script template for avrtiny arch. * emulparams/avrtiny.sh: New file. emulation parameters for avrtiny arch.
2014-05-20Fix MSP430 assembler to support #hi(<symbol>).Nick Clifton1-0/+4
* config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter. Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1. (msp430_srcoperand): Store vshift value in operand. * msp430.h (struct msp430_operand_s): Add vshift field. * gas/elf/struct.d: Expect extra output from some toolchains. * gas/symver/symver0.d: Likewise. * gas/symver/symver1.d: Likewise.
2014-05-07Add MIPS r3 and r5 support.Andrew Bennett1-0/+24
This patch firstly adds support for mips32r3 mips32r5, mips64r3 and mips64r5. Secondly it adds support for the eretnc instruction. ChangeLog: bfd/ * aoutx.h (NAME (aout, machine_type)): Add mips32r3, mips64r3, mips32r5 and mips64r5. * archures.c (bfd_architecture): Likewise. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (arch_info_struct): Likewise. * elfxx-mips.c (mips_set_isa_flags): Likewise. gas/ * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3 and mips64r5. (ISA_HAS_64BIT_FPRS): Likewise. (ISA_HAS_ROR): Likewise. (ISA_HAS_ODD_SINGLE_FPR): Likewise. (ISA_HAS_MXHC1): Likewise. (hilo_interlocks): Likewise. (md_longopts): Likewise. (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5. (ISA_HAS_DROR): Likewise. (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and OPTION_MIPS64R5. (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and mips64r5. (md_parse_option): Likewise. (s_mipsset): Likewise. (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3 and mips64r5. Also change p5600 entry to be mips32r5. * configure.in: Add support for mips32r3, mips32r5, mips64r3 and mips64r5. * configure: Regenerate. * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and -mips64r5 command line options. * doc/as.texinfo: Likewise. gas/testsuite/ * gas/mips/mips.exp: Add MIPS32r5 tests. Also add the mips32r3, mips32r5, mips64r3 and mips64r5 isas to the testsuite. * gas/mips/r5.s: New test. * gas/mips/r5.d: Likewise. include/opcode/ * mips.h (INSN_ISA_MASK): Updated. (INSN_ISA32R3): New define. (INSN_ISA32R5): New define. (INSN_ISA64R3): New define. (INSN_ISA64R5): New define. (INSN_ISA64, INSN_ISA64R2, INSN_ISA3_32, INSN_ISA3_32R2, INSN_ISA4_32 INSN_ISA4_32R2, INSN_ISA5_32R2): Renumbered. (mips_isa_table): Add entries for mips32r3, mips32r5, mips64r3 and mips64r5. (INSN_UPTO32R3): New define. (INSN_UPTO32R5): New define. (INSN_UPTO64R3): New define. (INSN_UPTO64R5): New define. (ISA_MIPS32R3): New define. (ISA_MIPS32R5): New define. (ISA_MIPS64R3): New define. (ISA_MIPS64R5): New define. (CPU_MIPS32R3): New define. (CPU_MIPS32R5): New define. (CPU_MIPS64R3): New define. (CPU_MIPS64R5): New define. opcodes/ * mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction. (I34): New define. (I36): New define. (I66): New define. (I68): New define. * mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and mips64r5. (parse_mips_dis_option): Update MSA and virtualization support to allow mips64r3 and mips64r5.
2014-05-01include/opcode/Richard Sandiford1-0/+4
* mips.h (mips_isa_table): Avoid hard-coding INSN_ISA* values.
2014-04-22Remove support for the (deprecated) openrisc and or32 configurations and replaceChristian Svensson1-0/+4
with support for the new or1k configuration.
2014-03-05Update copyright yearsAlan Modra1-1/+5
2013-12-16Range of element index is too large on MIPS MSA element selection instructions.Andrew Bennett1-0/+5
The element index range for the following MIPS MSA instructions: sldi, splati, copy_s, copy_u, insert and insve is 1 bit too large. This patch fixes this issue. ChangeLog: gas/testsuite/gas/mips/ * msa.s: Reduced maximum element index range for sldi, splati, copy_s, copy_u, insert and insve instructions. * msa64.s: Likewise. * micromips@msa.d: Likewise. * micromips@msa64.d: Likewise. * msa.d: Likewise. * msa64.d: Likewise. include/opcode/ * mips.h: Updated description of +o, +u, +v and +w for MIPS and microMIPS. opcodes/ * micromips-opc.c (decode_micromips_operand): Reduced range of +o, +u, +v and +w. (micromips_opcodes): Reduced element index range for sldi, splati, copy_s, copy_u, insert and insve instructions. * opcodes/mips-opc.c (decode_mips_operand): Reduced range of +o, +u, +v and +w. (mips_builtin_opcodes): Reduced element index range for sldi, splati, copy_s, copy_u, insert and insve instructions.
2013-12-13Add support for Andes NDS32:Kuan-Lin Chen1-0/+5
BFD: * Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Add nds32 files. * Makefile.in: Regenerate. * archures.c (bfd_nds32_arch): Add nds32 target. * bfd-in2.h: Regenerate. * config.bfd (nds32*le-*-linux): Add bfd_elf32_nds32lelin_vec and bfd_elf32_nds32belin_vec. (nds32*be-*-linux*): Likewise. (nds32*le-*-*): Add bfd_elf32_nds32le_vec and bfd_elf32_nds32be_vec. (nds32*be-*-*): Likewise. * configure.in (bfd_elf32_nds32be_vec): Add elf32-nds32.lo. (bfd_elf32_nds32le_vec): Likewise. (bfd_elf32_nds32belin_vec): Likewise. (bfd_elf32_nds32lelin_vec): Likewise. * configure: Regenerate. * cpu-nds32.c: New file for nds32. * elf-bfd.h: Add NDS32_ELF_DATA. * elf32-nds32.c: New file for nds32. * elf32-nds32.h: New file for nds32. * libbfd.h: Regenerate. * reloc.c: Add relocations for nds32. * targets.c (bfd_elf32_nds32be_vec): New declaration for nds32. (bfd_elf32_nds32le_vec): Likewise. (bfd_elf32_nds32belin_vec): Likewise. (bfd_elf32_nds32lelin_vec): Likewise. BINUTILS: * readelf.c: Include elf/nds32.h (guess_is_rela): Add case for EM_NDS32. (dump_relocations): Add case for EM_NDS32. (decode_NDS32_machine_flags): New. (get_machine_flags): Add case for EM_NDS32. (is_32bit_abs_reloc): Likewise. (is_16bit_abs_reloc): Likewise. (process_nds32_specific): New. (process_arch_specific): Add case for EM_NDS32. * NEWS: Announce Andes nds32 support. * MAINTAINERS: Add nds32 maintainers. TESTSUITE: * binutils-all/objdump.exp: Add NDS32 cpu. * binutils-all/readelf.r: Skip extra reloc created by NDS32. GAS: * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nds32.c. (TARGET_CPU_HFILES): Add config/tc-nds32.h. * Makefile.in: Regenerate. * configure.in (nds32): Add nds32 target extension config support. * configure.tgt : Add case for nds32-*-elf* and nds32-*-linux*. * configure: Regenerate. * config/tc-nds32.c: New file for nds32. * config/tc-nds32.h: New file for nds32. * doc/Makefile.am (CPU_DOCS): Add c-nds32.texi. * doc/Makefile.in: Regenerate. * doc/as.texinfo: Add nds32 options. * doc/all.texi: Set NDS32. * doc/c-nds32.texi: New file dor nds32 document. * NEWS: Announce Andes nds32 support. TESTSUITE: * gas/all/gas.exp: Add expected failures for NDS32. * gas/elf/elf.exp: Likewise. * gas/lns/lns.exp: Use alternate test. * gas/macros/irp.d: Skip for NDS32. * gas/macros/macros.exp: Skip some tests for the NDS32. * gas/macros/rept.d: Skip for NDS32. * gas/macros/test3.d: Skip for NDS32. * gas/nds32: New directory. * gas/nds32/alu-1.s: New test. * gas/nds32/alu-1.d: Likewise. * gas/nds32/alu-2.s: Likewise. * gas/nds32/alu-2.d: Likewise. * gas/nds32/br-1.d: Likewise. * gas/nds32/br-1.s: Likewise. * gas/nds32/br-2.d: Likewise. * gas/nds32/br-2.s: Likewise. * gas/nds32/ji-jr.d: Likewise. * gas/nds32/ji-jr.s: Likewise. * gas/nds32/ls.d: Likewise. * gas/nds32/ls.s: Likewise. * gas/nds32/lsi.d: Likewise. * gas/nds32/lsi.s: Likewise. * gas/nds32/to-16bit-v1.d: Likewise. * gas/nds32/to-16bit-v1.s: Likewise. * gas/nds32/to-16bit-v2.d: Likewise. * gas/nds32/to-16bit-v2.s: Likewise. * gas/nds32/to-16bit-v3.d: Likewise. * gas/nds32/to-16bit-v3.s: Likewise. * gas/nds32/nds32.exp: New test driver. LD: * Makefile.am (ALL_EMULATION_SOURCES): Add nds32 target. * Makefile.in: Regenerate. * configure.tgt: Add case for nds32*le-*-elf*, nds32*be-*-elf*, nds32*le-*-linux-gnu*, and nds32*be-*-linux-gnu*. * emulparams/nds32belf.sh: New file for nds32. * emulparams/nds32belf_linux.sh: Likewise. * emulparams/nds32belf16m.sh: Likewise. * emulparams/nds32elf.sh: Likewise. * emulparams/nds32elf_linux.sh: Likewise. * emulparams/nds32elf16m.sh: Likewise. * emultempl/nds32elf.em: Likewise. * scripttempl/nds32elf.sc}: Likewise. * gen-doc.texi: Set NDS32. * ld.texinfo: Set NDS32. * NEWS: Announce Andes nds32 support. TESTSUITE: * lib/ld-lib.exp: Add NDS32 to list of targets that do not support shared library generation. * ld-nds32: New directory. * ld-nds32/branch.d: New test. * ld-nds32/branch.ld: New test. * ld-nds32/branch.s: New test. * ld-nds32/diff.d: New test. * ld-nds32/diff.ld: New test. * ld-nds32/diff.s: New test. * ld-nds32/gp.d: New test. * ld-nds32/gp.ld: New test. * ld-nds32/gp.s: New test. * ld-nds32/imm.d: New test. * ld-nds32/imm.ld: New test. * ld-nds32/imm.s: New test. * ld-nds32/imm_symbol.s: New test. * ld-nds32/relax_jmp.d: New test. * ld-nds32/relax_jmp.ld: New test. * ld-nds32/relax_jmp.s: New test. * ld-nds32/relax_load_store.d: New test. * ld-nds32/relax_load_store.ld: New test. * ld-nds32/relax_load_store.s: New test. * ld-nds32/nds32.exp: New file. OPCODES: * Makefile.am (TARGET_LIBOPCODES_CFILES): Add nds32-asm.c and nds32-dis.c. * Makefile.in: Regenerate. * configure.in: Add case for bfd_nds32_arch. * configure: Regenerate. * disassemble.c (ARCH_nds32): Define. * nds32-asm.c: New file for nds32. * nds32-asm.h: New file for nds32. * nds32-dis.c: New file for nds32. * nds32-opc.h: New file for nds32. INCLUDE: * dis-asm.h (print_insn_nds32): Add nds32 target. * elf/nds32.h: New file for nds32. * opcode/nds32.h: New file for nds32.
2013-12-07strip off +x bits on non-executable/script filesMike Frysinger1-0/+4
These files are source files and have no business being +x. We couldn't easily fix it in CVS (you need login+write access to the raw rcs files), but we can fix this w/git. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-11-20gas/testsuite/Yufeng Zhang1-0/+5
* gas/aarch64/msr.s: Add tests. * gas/aarch64/msr.d: Update. include/opcode * aarch64.h (aarch64_pstatefields): Change element type to aarch64_sys_reg. opcodes/ * aarch64-opc.c (aarch64_pstatefields): Update.
2013-11-18Add support for armv7ve to gas.Yufeng Zhang1-0/+6
gas/ * config/tc-arm.c (arm_archs): New armv7ve architecture option. (arm_cpus): Replace ARM_ARCH_V7A_IDIV_MP_SEC_VIRT with ARM_ARCH_V7VE for cortex-a7, cortex-a12 and cortex-a15. (cpu_arch_ver): Likewise. * doc/c-arm.texi: Document armv7ve. gas/testsuite/ * gas/arm/attr-march-armv7ve.d: New test case for armv7ve. include/opcode/ * arm.h (ARM_AEXT_V7VE): New define. (ARM_ARCH_V7VE): New define. (ARM_ARCH_V7A_IDIV_MP_SEC_VIRT): Removed.
2013-11-18Revert "Add support for AArch64 trace unit registers."Yufeng Zhang1-0/+9
This reverts commit 75468c93c14e9f14dd9020712538c5303a455876.
2013-11-15gas/Yufeng Zhang1-0/+5
* config/tc-aarch64.c (set_other_error): New function. (parse_sys_reg): Add new parameter 'sys_reg' and if non-NULL set the variable to which it points with 'o'. (parse_operands): Update; check for write to read-only system registers or read from write-only ones. gas/testsuite/ * gas/aarch64/diagnostic.s: Add tests. * gas/aarch64/diagnostic.l: Update. * gas/aarch64/tracereg-illegal.d: New file. * gas/aarch64/tracereg-illegal.l: Ditto. * gas/aarch64/tracereg-illegal.s: Ditto. * gas/aarch64/tracereg.d: Ditto. * gas/aarch64/tracereg.s: Ditto. include/opcode * aarch64.h (aarch64_sys_reg_readonly_p): New declaration. (aarch64_sys_reg_writeonly_p): Ditto. opcodes/ * aarch64-opc.c (CPENT): New define. (F_READONLY, F_WRITEONLY): Likewise. (aarch64_sys_regs): Add trace unit registers. (aarch64_sys_reg_readonly_p): New function. (aarch64_sys_reg_writeonly_p): Ditto.
2013-11-05gas/Yufeng Zhang1-0/+6
* config/tc-aarch64.c (parse_sys_reg): Update to use aarch64_sys_reg; call aarch64_sys_reg_deprecated_p and warn about the deprecated system registers. gas/testsuite/ * gas/aarch64/deprecated.d: New file. * gas/aarch64/deprecated.l: New file. * gas/aarch64/deprecated.s: New file. * gas/aarch64/sysreg-1.s: Add tests. * gas/aarch64/sysreg-1.d: Add tests. include/opcode/ * aarch64.h (aarch64_sys_reg): New typedef. (aarch64_sys_regs): Change to define with the new type. (aarch64_sys_reg_deprecated_p): Declare. opcodes/ * aarch64-opc.c (F_DEPRECATED): New macro. (aarch64_sys_regs): Update; flag "spsr_svc" and "spsr_hyp" with F_DEPRECATED. (aarch64_print_operand): Call aarch64_sys_reg_deprecated_p on AARCH64_OPND_SYSREG.
2013-11-05gas/Yufeng Zhang1-0/+5
* config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_COND1. gas/testsuite/ * gas/aarch64/alias.s: Add tests. * gas/aarch64/alias.d: Update. * gas/aarch64/no-aliases.d: Update. * gas/aarch64/diagnostic.s: Add tests. * gas/aarch64/diagnostic.l: Update. * gas/aarch64/illegal.s: Add tests. * gas/aarch64/illegal.l: Update. include/opcode/ * aarch64.h (enum aarch64_operand_class): Add AARCH64_OPND_CLASS_COND. (enum aarch64_opnd): Add AARCH64_OPND_COND1. opcodes/ * aarch64-dis.c (convert_ubfm_to_lsl): Check for cond != '111x'. (convert_from_csel): Likewise. * aarch64-opc.c (operand_general_constraint_met_p): Handle AARCH64_OPND_CLASS_COND and AARCH64_OPND_COND1. (aarch64_print_operand): Handle AARCH64_OPND_COND1. * aarch64-tbl.h (aarch64_opcode_table): Use COND1 instead of COND for cinc, cset, cinv, csetm and cneg. (AARCH64_OPERANDS): Add entry for AARCH64_OPND_COND1. * aarch64-asm-2.c: Re-generated. * aarch64-dis-2.c: Ditto. * aarch64-opc-2.c: Ditto.
2013-10-142013-10-14 Chao-ying Fu <Chao-ying.Fu@imgtec.com>Chao-ying Fu1-0/+13
* mips.h (mips_operand_type): Add OP_IMM_INDEX and OP_REG_INDEX. (mips_reg_operand_type): Add OP_REG_MSA and OP_REG_MSA_CTRL. For MIPS, add comments for +d, +e, +h, +k, +l, +n, +o, +u, +v, +w, +T, +U, +V, +W, +~, +!, +@, +#, +$, +%, +^, +&, +*, +|. For MIPS, update extension character sequences after +. (ASE_MSA): New define. (ASE_MSA64): New define. For microMIPS, add comments for +d, +e, +h, +k, +l, +n, +o, +u, +v, +w, +x, +T, +U, +V, +W, +~, +!, +@, +#, +$, +%, +^, +&, +*, +|. For microMIPS, update extension character sequences after +.
2013-08-23 PR binutils/15834Nick Clifton1-1/+6
Fix typos: --- bfd/bfdio.c | 2 +- bfd/elf32-spu.c | 2 +- bfd/elfnn-aarch64.c | 2 +- binutils/od-xcoff.c | 2 +- config/tcl.m4 | 2 +- gas/config/tc-ia64.c | 2 +- gas/config/tc-sparc.c | 2 +- gas/config/tc-z80.c | 12 ++++++------ gas/doc/c-i386.texi | 6 +++--- gas/doc/c-m32r.texi | 2 +- gas/testsuite/gas/d10v/instruction_packing.d | 2 +- gas/testsuite/gas/z80/atend.d | 2 +- gold/object.h | 2 +- include/gdb/remote-sim.h | 2 +- include/opcode/ChangeLog | 2 +- include/opcode/i960.h | 2 +- ld/testsuite/ld-mips-elf/mips16-pic-1.inc | 2 +- opcodes/aarch64-asm.c | 2 +- opcodes/aarch64-dis.c | 2 +- opcodes/msp430-dis.c | 2 +-
2013-08-19include/opcode/Richard Sandiford1-0/+4
* mips.h: Remove references to "+I" and imm2_expr. gas/ * config/tc-mips.c (imm2_expr): Delete. (md_assemble, match_insn, imm2_expr.X_op, mips_ip): Update accordingly.
2013-08-19include/opcode/Richard Sandiford1-0/+4
* mips.h (M_DEXT, M_DINS): Delete. opcodes/ * micromips-opc.c (micromips_opcodes): Replace "dext" and "dins" macro entries with "dextm", "dextu", "dinsm" and "dinsu" aliases. Use +H rather than +C for the real "dext". * mips-opc.c (mips_builtin_opcodes): Likewise. gas/ * config/tc-mips.c (report_bad_range, report_bad_field): Delete. (macro): Remove M_DEXT and M_DINS handling. gas/testsuite/ * gas/mips/ext-ill.l, gas/mips/mips64r2-ill.l: Expect DEXT and DINS error messages to have the same form as the EXT and INS ones. * gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d, gas/mips/micromips-trap.d, gas/mips/micromips.d, gas/mips/micromips@mips64r2.d, gas/mips/mips64r2.d: Expect "dext" and "dins" instead of "dextm", "dextu", "dinsm" and "dinsu".
2013-08-19include/opcode/Richard Sandiford1-0/+5
* mips.h (OP_OPTIONAL_REG): New mips_operand_type. (mips_optional_operand_p): New function. opcodes/ * mips-formats.h (OPTIONAL_REG, OPTIONAL_MAPPED_REG): New macros. * micromips-opc.c (decode_micromips_operand): Use OPTIONAL_REG and OPTIONAL_MAPPED_REG. * mips-opc.c (decode_mips_operand): Likewise. * mips16-opc.c (decode_mips16_operand): Likewise. * mips-dis.c (print_insn_arg): Handle OP_OPTIONAL_REG. gas/ * config/tc-mips.c (operand_reg_mask, match_operand): Handle OP_OPTIONAL_REG. (mips_ip, mips16_ip): Use mips_optional_operand_p to check for optional operands.
2013-08-04include/opcode/Richard Sandiford1-0/+10
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> Richard Sandiford <rdsandiford@googlemail.com> * mips.h: Document new VU0 operand characters. (OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types. (OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R) (OP_REG_R5900_ACC): New mips_reg_operand_types. (INSN2_VU0_CHANNEL_SUFFIX): New macro. (mips_vu0_channel_mask): Declare. opcodes/ 2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> Richard Sandiford <rdsandiford@googlemail.com> * mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC. (print_vu0_channel): New function. (print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX. (print_insn_args): Handle '#'. (print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX. * mips-opc.c (mips_vu0_channel_mask): New constant. (decode_mips_operand): Handle new VU0 operand types. (VU0, VU0CH): New macros. (mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E" for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2. Use "+6" rather than "G" for QMFC2 and QMTC2. gas/ 2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> Richard Sandiford <rdsandiford@googlemail.com> * config/tc-mips.c (MAX_OPERANDS): Bump to 6. (RWARN): Bump to 0x8000000. (RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R) (RTYPE_R5900_ACC): New register types. (RTYPE_MASK): Include them. (R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New macros. (reg_names): Include them. (mips_parse_register_1): New function, split out from... (mips_parse_register): ...here. Add a channels_ptr parameter. Look for VU0 channel suffixes when nonnull. (reg_lookup): Update the call to mips_parse_register. (mips_parse_vu0_channels): New function. (OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types. (mips_operand_token): Add a "channels" field to the union. Extend the comment above "ch" to OT_DOUBLE_CHAR. (mips_parse_base_start): Match -- and ++. Handle channel suffixes. (mips_parse_argument_token): Handle channel suffixes here too. (validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX. Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits. Handle '#' formats. (md_begin): Register $vfN and $vfI registers. (operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX. (convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC. (match_vu0_suffix_operand): New function. (match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX. (macro): Use "+7" rather than "E" for LDQ2 and STQ2. (mips_lookup_insn): New function. (mips_ip): Use it. Allow "+K" operands to be elided at the end of an instruction. Handle '#' sequences. gas/testsuite/ 2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> * gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric coprocessor registers. * gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d, gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d, gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests. * gas/mips/mips.exp: Run them.
generated by cgit v1.1 at 2024-12-15 11:20:18 +0000