aboutsummaryrefslogtreecommitdiff
path: root/include/elf
AgeCommit message (Collapse)AuthorFilesLines
2020-01-13[ARC][committed] Update ARC cpu listClaudiu Zissulescu1-0/+4
include/ xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com> * elf/arc-cpu.def: Update ARC cpu list.
2020-01-02Add support for the GBZ80, Z180, and eZ80 variants of the Z80 architecure. ↵Sergey Belyashov1-0/+52
Add an ELF based target for these as well. PR 25224 bfd * Makefile.am: Add z80-elf target support. * configure.ac: Likewise. * targets.c: Likewise. * config.bfd: Add z80-elf target support and new arches: ez80 and z180. * elf32-z80.c: New file. * archures.c: Add new z80 architectures: eZ80 and Z180. * coffcode.h: Likewise. * cpu-z80.c: Likewise. * bfd-in2.h: Likewise plus additional Z80 relocations. * coff-z80.c: Add new relocations for Z80 target and local label check. gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support for assembler code generated by SDCC. Add new relocation types. Add z80-elf target support. * config/tc-z80.h: Add z80-elf target support. Enable dollar local labels. Local labels starts from ".L". * testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict. * testsuite/gas/all/fwdexp.s: Likewise. * testsuite/gas/z80/suffix.d: Fix failure on ELF target. * testsuite/gas/z80/z80.exp: Add new tests * testsuite/gas/z80/dollar.d: New file. * testsuite/gas/z80/dollar.s: New file. * testsuite/gas/z80/ez80_adl_all.d: New file. * testsuite/gas/z80/ez80_adl_all.s: New file. * testsuite/gas/z80/ez80_adl_suf.d: New file. * testsuite/gas/z80/ez80_isuf.s: New file. * testsuite/gas/z80/ez80_z80_all.d: New file. * testsuite/gas/z80/ez80_z80_all.s: New file. * testsuite/gas/z80/ez80_z80_suf.d: New file. * testsuite/gas/z80/r800_extra.d: New file. * testsuite/gas/z80/r800_extra.s: New file. * testsuite/gas/z80/r800_ii8.d: New file. * testsuite/gas/z80/r800_z80_doc.d: New file. * testsuite/gas/z80/z180.d: New file. * testsuite/gas/z80/z180.s: New file. * testsuite/gas/z80/z180_z80_doc.d: New file. * testsuite/gas/z80/z80_doc.d: New file. * testsuite/gas/z80/z80_doc.s: New file. * testsuite/gas/z80/z80_ii8.d: New file. * testsuite/gas/z80/z80_ii8.s: New file. * testsuite/gas/z80/z80_in_f_c.d: New file. * testsuite/gas/z80/z80_in_f_c.s: New file. * testsuite/gas/z80/z80_op_ii_ld.d: New file. * testsuite/gas/z80/z80_op_ii_ld.s: New file. * testsuite/gas/z80/z80_out_c_0.d: New file. * testsuite/gas/z80/z80_out_c_0.s: New file. * testsuite/gas/z80/z80_reloc.d: New file. * testsuite/gas/z80/z80_reloc.s: New file. * testsuite/gas/z80/z80_sli.d: New file. * testsuite/gas/z80/z80_sli.s: New file. ld * Makefile.am: Add new target z80-elf * configure.tgt: Likewise. * emultempl/z80.em: Add support for eZ80 and Z180 architectures. * emulparams/elf32z80.sh: New file. * emultempl/z80elf.em: Likewise. * testsuite/ld-z80/arch_ez80_adl.d: Likewise. * testsuite/ld-z80/arch_ez80_z80.d: Likewise. * testsuite/ld-z80/arch_r800.d: Likewise. * testsuite/ld-z80/arch_z180.d: Likewise. * testsuite/ld-z80/arch_z80.d: Likewise. * testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise. * testsuite/ld-z80/comb_arch_z180.d: Likewise. * testsuite/ld-z80/labels.s: Likewise. * testsuite/ld-z80/relocs.s: Likewise. * testsuite/ld-z80/relocs_b_ez80.d: Likewise. * testsuite/ld-z80/relocs_b_z80.d: Likewise. * testsuite/ld-z80/relocs_f_z80.d: Likewise. * testsuite/ld-z80/z80.exp: Likewise. opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra81-81/+81
2019-11-07Remove CR16C supportAlan Modra1-258/+0
I think it is past time to remove CR16C support. CR16C was added in 2004, and only for ld. gas and binutils support is lacking, and there have been no commits to bfd/elf32-cr16c.c other than warning fixes or global maintainers making changes to all targets. I see no maintainer listed for CR16C, and no commits from anyone at NSC supporting the target. Furthermore, at the time the CR16 support was added in 2007, config.sub was changed upstream to no longer recognise cr16c as a valid cpu. That means the CR16C ld support is only available as a secondary target by configuring with, for example, --enable-targets=all or --enable-targets=cr16c-unknown-elf. No testing of the CR16C target is possible. include/ * elf/cr16c.h: Delete. bfd/ * cpu-cr16c.c: Delete. * elf32-cr16c.c: Delete. * Makefile.am, * archures.c, * config.bfd, * configure.ac, * reloc.c, * targets.c: Remove cr16c support. * Makefile.in, * bfd-in2.h, * configure, * libbfd.h, * po/SRC-POTFILES.in: Regenerate. ld/ * emulparams/elf32cr16c.sh: Delete. * scripttempl/elf32cr16c.sc: Delete. * Makefile.am, * configure.tgt: Remove cr16c support. * NEWS: Mention removal of cr16c. * Makefile.in, * po/BLD-POTFILES.in: Regenerate.
2019-10-25PR4499, assign file positions assumes segment offsets increasingAlan Modra1-2/+7
This rewrites much of assign_file_positions_for_non_load_sections to allow objcopy and strip to handle cases like that in PR4499 where program headers were not in their usual position immediately after the ELF file header, and PT_LOAD headers were not sorted by paddr. PR 4499 include/ * elf/internal.h (struct elf_segment_map): Delete header_size. Add no_sort_lma and idx. bfd/ * elf-nacl.c (nacl_modify_segment_map): Set no_sort_lma for all PT_LOAD segments. * elf32-spu.c (spu_elf_modify_segment_map): Likewise on overlay PT_LOAD segments. * elf.c (elf_sort_segments): New function. (assign_file_positions_except_relocs): Use shortcuts to elfheader and elf_tdata. Seek to e_phoff not sizeof_ehdr to write program headers. Move PT_PHDR check.. (assign_file_positions_for_non_load_sections): ..and code setting PT_PHDR p_vaddr and p_paddr, and code setting __ehdr_start value.. (assign_file_positions_for_load_sections): ..to here. Sort PT_LOAD headers. Delete header_pad code. Use actual number of headers rather than allocated in calculating size for program headers. Don't assume program headers follow ELF file header. Simplify pt_load_count code. Only set "off" for PT_LOAD or PT_NOTE in cores. (rewrite_elf_program_header): Set p_vaddr_offset for segments that include file and program headers. (copy_elf_program_header): Likewise, replacing header_size code.
2019-10-07Add support for new functionality in the msp430 backend of GCC.Jozef Lawrynowicz1-0/+41
This functionality will generate a new GNU object attribute for the "data region" has been added. This object attribute is used mark whether the compiler has generated code assuming that data could be in the upper or lower memory regions. Code which assumes data is always in the lower memory region is incompatible with code which uses the full memory range for data. The patch also adds a new assembler directive ".mspabi_attribute" to handle the existing MSPABI object attributes. GCC will now emit both .gnu_attribute and .mspabi_attribute directives to indicate what options the source file was compiled with. The assembler will now check the values set in these directives against the options that the it has been invoked with. If there is a discrepancy, the assembler will exit with an error. bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to.. (elf32_msp430_merge_msp430_attributes): Add support for merging the GNU object attribute for data region. binutils* readelf.c (display_msp430_gnu_attribute): New. (process_arch_specific): Use msp430 specific handler for GNU attributes. gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to FALSE if the data region is set to "upper", "either" or "none". (msp430_object_attribute): New. (md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute. (msp430_md_end): Replace hard-coded attribute values with enums. Handle data region object attribute. * doc/as.texi: Document MSP430 Data Region object attribute. * doc/c-msp430.texi: Document the .mspabi_attribute directive. * testsuite/gas/msp430/attr-430-small-bad.d: New test. * testsuite/gas/msp430/attr-430-small-bad.l: New test. * testsuite/gas/msp430/attr-430-small-good.d: New test. * testsuite/gas/msp430/attr-430-small.s: New test. * testsuite/gas/msp430/attr-430x-large-any-bad.d: New test. * testsuite/gas/msp430/attr-430x-large-any-bad.l: New test. * testsuite/gas/msp430/attr-430x-large-any-good.d: New test. * testsuite/gas/msp430/attr-430x-large-any.s: New test. * testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test. * testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test. * testsuite/gas/msp430/attr-430x-large-lower-good.d: New test. * testsuite/gas/msp430/attr-430x-large-lower.s: New test. * testsuite/gas/msp430/msp430.exp: Run new tests. include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names and values. ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test. * testsuite/ld-msp430-elf/attr-gnu-obj.s: New test. * testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test. * testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test. * testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test. * testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
2019-08-22ARM CMSE symbolsAlan Modra1-7/+0
This patch removes use of st_target_internal to cache the result of comparing symbol names against CMSE_PREFIX. The problem with setting a bit in st_target_internal in swap_symbol_in is that calling bfd_elf_sym_name from swap_symbol_in requires symtab_hdr, and you don't know for sure whether swap_symbol_in is operating on dynsyms (and thus elf_tdata (abfd)->dynsymtab_hdr should be used) or on the normal symtab (thus elf_tdata (abfd)->symtab_hdr). You can make an educated guess based on abfd->flags & DYNAMIC but that relies on knowing a lot about calls to bfd_elf_get_elf_syms, and is fragile in the face of possible future changes. include/ * elf/arm.h (ARM_GET_SYM_CMSE_SPCL, ARM_SET_SYM_CMSE_SPCL): Delete. bfd/ * elf32-arm.c (cmse_scan): Don't use ARM_GET_SYM_CMSE_SPCL, instead recognize CMSE_PREFIX in symbol name. (elf32_arm_gc_mark_extra_sections): Likewise. (elf32_arm_filter_cmse_symbols): Don't test ARM_GET_SYM_CMSE_SPCL. (elf32_arm_swap_symbol_in): Don't invoke ARM_SET_SYM_CMSE_SPCL.
2019-08-09Add support for a MIPS specific .MIPS.xhash section.Mihailo Stojanovic1-0/+6
This patch is a reimplementation of [1] which was submitted in 2015 by Neil Schellenberger. Copyright issue was sorted out [2] last year. It proposed a new section (.gnu.xhash) and related dynamic tag (DT_GNU_XHASH). The new section would be virtually identical to the existing .gnu.hash except for the translation table (xlat) which would contain correct MIPS .dynsym indexes corresponding to the hashvals in chains. This is because MIPS ABI imposes a different ordering on the dynsyms than the one expected by the .gnu.hash section. Another addition would be a leading word (ngnusyms) which would contain the number of entries in the translation table. In this patch, the new section name and dynamic tag are changed to reflect the fact that the section should be treated as MIPS-specific (.MIPS.xhash and DT_MIPS_XHASH). This patch addresses the alignment issue as reported in [3], which is caused by the leading word added to the .MIPS.xhash section. Leading word is removed in this patch, and the number of entries in the translation table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is addressed by the corresponding glibc patch). Suggestions on coding style in [4] were taken into account. Existing GNU hash testcase was covered, and another one was added in the MIPS part of the testsuite. The other major change is reserving MIPS ABI version 5 for .MIPS.xhash, marking the need of support for .MIPS.xhash in the dynamic linker (again, addressed in the corresponding glibc patch). This is something which I am not sure of, especially after reading [5]. I am confused on whether this ABI version is reserved for IFUNC, or it can be used for this purpose. Already mentioned glibc patch is submitted at: https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html [1] https://sourceware.org/ml/binutils/2015-10/msg00057.html [2] https://sourceware.org/ml/binutils/2018-03/msg00025.html [3] https://sourceware.org/ml/binutils/2016-01/msg00006.html [4] https://sourceware.org/ml/binutils/2016-02/msg00097.html [5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section. * emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section. * emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section. * emultempl/mipself.em: Remove mips_after_parse function. * testsuite/ld-elf/hash.d: Update comment. * testsuite/ld-mips-elf/hash1.d: New test. * testsuite/ld-mips-elf/hash1.s: Ditto. * testsuite/ld-mips-elf/hash1a.d: Remove. * testsuite/ld-mips-elf/hash1b.d: Ditto. * testsuite/ld-mips-elf/hash1c.d: Ditto * testsuite/ld-mips-elf/hash2.d: New test. * testsuite/ld-mips-elf/mips-elf.exp: New tests. * testsuite/ld-mips-elf/start.s: New test. bfd * elf-bfd.h (struct elf_backend_data): New members. * elflink.c (_bfd_elf_link_create_dynamic_sections): Create .gnu.hash section if necessary. (struct collect_gnu_hash_codes): New member. (elf_gnu_hash_process_symidx): New function name. (elf_renumber_gnu_hash_syms): Ignore local and undefined symbols. Record xlat location for every symbol which should have a .MIPS.xhash entry. (bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to dynamic section if necessary. (GNU_HASH_SECTION_NAME): New define. (bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section. Update the section size info. * elfxx-mips.c (struct mips_elf_hash_sort_data): New members. (struct mips_elf_link_hash_entry): New member. (mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation table location. (mips_elf_sort_hash_table): Initialize the pointer to the .MIPS.xhash section. (mips_elf_sort_hash_table_f): Populate the .MIPS.xhash translation table entry with the symbol dynindx. (_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH. (_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section info. (_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash section. (_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to dynamic section. (_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH. (_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section sh_link info. (_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag. (MIPS_LIBC_ABI_XHASH): New ABI version enum value. (_bfd_mips_post_process_headers): Mark the ABI version as MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section, but not a .hash section. (_bfd_mips_elf_record_xhash_symbol): New function. Record a position in the translation table, associated with the hash entry. * elfxx-mips.h (literal_reloc_p): Define elf_backend_record_xhash_symbol backend hook. * elfxx-target.h: Initialize elf_backend_record_xhash_symbol backend hook. include * elf/mips.h (SHT_GNU_XHASH): New define. (DT_GNU_XHASH): New define. binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type. (get_mips_section_type_name): Return MI{S_XHASH name string. (dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic info. (process_symbol_table): Initialize the .MIPS.xhash section pointer. Adjust the readelf output to support the new section. (process_object): Set the .MIPS.xhash dynamic info to zero.
2019-07-24PT_GNU_MBIND section mappingAlan Modra1-1/+3
* elf/internal.h (ELF_SECTION_IN_SEGMENT_1): Exclude non-alloc sections in GNU_MBIND segments.
2019-07-19[PowerPC64] pc-relative TLS relocationsAlan Modra1-2/+8
This patch supports using pcrel instructions in TLS code sequences. A number of new relocations are needed, gas operand modifiers to generate those relocations, and new TLS optimisation. For optimisation it turns out that the new pcrel GD and LD sequences can be distinguished from the non-pcrel GD and LD sequences by there being different relocations on the new sequence. The final "add ra,rb,13" on IE sequences similarly needs a new relocation, or as I chose, a modification of R_PPC64_TLS. On pcrel IE code, the R_PPC64_TLS points one byte into the "add" instruction rather than being on the instruction boundary. GD: pla 3,z@got@tlsgd@pcrel # R_PPC64_GOT_TLSGD34 bl __tls_get_addr@notoc(z@tlsgd) # R_PPC64_TLSGD and R_PPC64_REL24_NOTOC edited to IE pld 3,z@got@tprel@pcrel add 3,3,13 edited to LE paddi 3,13,z@tprel nop LD: pla 3,z@got@tlsld@pcrel # R_PPC64_GOT_TLSLD34 bl __tls_get_addr@notoc(z@tlsld) # R_PPC64_TLSLD and R_PPC64_REL24_NOTOC .. paddi 9,3,z2@dtprel pld 10,z3@got@dtprel@pcrel add 10,10,3 edited to LE paddi 3,13,0x1000 nop IE: pld 9,z@got@tprel@pcrel # R_PPC64_GOT_TPREL34 add 3,9,z@tls@pcrel # R_PPC64_TLS at insn+1 ldx 4,9,z@tls@pcrel lwax 5,9,z@tls@pcrel stdx 5,9,z@tls@pcrel edited to LE paddi 9,13,z@tprel nop ld 4,0(9) lwa 5,0(9) std 5,0(9) LE: paddi 10,13,z@tprel include/ * elf/ppc64.h (R_PPC64_TPREL34, R_PPC64_DTPREL34), (R_PPC64_GOT_TLSGD34, R_PPC64_GOT_TLSLD34), (R_PPC64_GOT_TPREL34, R_PPC64_GOT_DTPREL34): Define. (IS_PPC64_TLS_RELOC): Include new tls relocs. bfd/ * reloc.c (BFD_RELOC_PPC64_TPREL34, BFD_RELOC_PPC64_DTPREL34), (BFD_RELOC_PPC64_GOT_TLSGD34, BFD_RELOC_PPC64_GOT_TLSLD34), (BFD_RELOC_PPC64_GOT_TPREL34, BFD_RELOC_PPC64_GOT_DTPREL34), (BFD_RELOC_PPC64_TLS_PCREL): New pcrel tls relocs. * elf64-ppc.c (ppc64_elf_howto_raw): Add howtos for pcrel tls relocs. (ppc64_elf_reloc_type_lookup): Translate pcrel tls relocs. (must_be_dyn_reloc, dec_dynrel_count): Add R_PPC64_TPREL64. (ppc64_elf_check_relocs): Support pcrel tls relocs. (ppc64_elf_tls_optimize, ppc64_elf_relocate_section): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Map "tls@pcrel", "got@tlsgd@pcrel", "got@tlsld@pcrel", "got@tprel@pcrel", and "got@dtprel@pcrel". (fixup_size, md_assemble): Handle pcrel tls relocs. (ppc_force_relocation, ppc_fix_adjustable): Likewise. (md_apply_fix, tc_gen_reloc): Likewise. ld/ * testsuite/ld-powerpc/tlsgd.d, * testsuite/ld-powerpc/tlsgd.s, * testsuite/ld-powerpc/tlsie.d, * testsuite/ld-powerpc/tlsie.s, * testsuite/ld-powerpc/tlsld.d, * testsuite/ld-powerpc/tlsld.s: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.
2019-06-14Add R_AARCH64_P32_MOVW_PREL_* ELF32 relocsSzabolcs Nagy1-0/+4
These ilp32 relocations were missing for some reason. bfd/ChangeLog: * elfnn-aarch64.c: Enable MOVW_PREL relocs for ELF32. include/ChangeLog: * elf/aarch64.h (R_AARCH64_P32_MOVW_PREL_G0): Define. (R_AARCH64_P32_MOVW_PREL_G0_NC): Define. (R_AARCH64_P32_MOVW_PREL_G1): Define. ld/ChangeLog: * testsuite/ld-aarch64/aarch64-elf.exp: Add emit-relocs-22 and -23. * testsuite/ld-aarch64/emit-relocs-22.d: New test. * testsuite/ld-aarch64/emit-relocs-22.s: New test. * testsuite/ld-aarch64/emit-relocs-23.d: New test. * testsuite/ld-aarch64/emit-relocs-23.s: New test.
2019-05-24aarch64: add STO_AARCH64_VARIANT_PCS and DT_AARCH64_VARIANT_PCSSzabolcs Nagy1-0/+5
The bottom 2 bits of st_other are used for visibility, the top 6 bits are de facto reserved for processor specific use. This patch defines a bits to mark function symbols that follow a variant procedure call standard with different register usage convention. A dynamic tag is also defined that marks modules with R_<CLS>_JUMP_SLOT relocations referencing symbols marked with STO_AARCH64_VARIANT_PCS. This can be used by dynamic linkers that support lazy binding to decide what registers need to be preserved during symbol resolution. binutils/ChangeLog: * readelf.c (get_aarch64_dynamic_type): Handle DT_AARCH64_VARIANT_PCS. (get_aarch64_symbol_other): New, handles STO_AARCH64_VARIANT_PCS. (get_symbol_other): Call get_aarch64_symbol_other. include/ChangeLog: * elf/aarch64.h (DT_AARCH64_VARIANT_PCS): Define. (STO_AARCH64_VARIANT_PCS): Define.
2019-05-24PowerPC relocations for prefix insnsAlan Modra1-0/+24
include/ * elf/ppc64.h (R_PPC64_PLTSEQ_NOTOC, R_PPC64_PLTCALL_NOTOC), (R_PPC64_PCREL_OPT, R_PPC64_D34, R_PPC64_D34_LO, R_PPC64_D34_HI30), (R_PPC64_D34_HA30, R_PPC64_PCREL34, R_PPC64_GOT_PCREL34), (R_PPC64_PLT_PCREL34, R_PPC64_PLT_PCREL34_NOTOC), (R_PPC64_ADDR16_HIGHER34, R_PPC64_ADDR16_HIGHERA34), (R_PPC64_ADDR16_HIGHEST34, R_PPC64_ADDR16_HIGHESTA34), (R_PPC64_REL16_HIGHER34, R_PPC64_REL16_HIGHERA34), (R_PPC64_REL16_HIGHEST34, R_PPC64_REL16_HIGHESTA34), (R_PPC64_D28, R_PPC64_PCREL28): Define. bfd/ * reloc.c (BFD_RELOC_PPC64_D34, BFD_RELOC_PPC64_D34_LO), (BFD_RELOC_PPC64_D34_HI30, BFD_RELOC_PPC64_D34_HA30), (BFD_RELOC_PPC64_PCREL34, BFD_RELOC_PPC64_GOT_PCREL34), (BFD_RELOC_PPC64_PLT_PCREL34), (BFD_RELOC_PPC64_ADDR16_HIGHER34, BFD_RELOC_PPC64_ADDR16_HIGHERA34), (BFD_RELOC_PPC64_ADDR16_HIGHEST34, BFD_RELOC_PPC64_ADDR16_HIGHESTA34), (BFD_RELOC_PPC64_REL16_HIGHER34, BFD_RELOC_PPC64_REL16_HIGHERA34), (BFD_RELOC_PPC64_REL16_HIGHEST34, BFD_RELOC_PPC64_REL16_HIGHESTA34), (BFD_RELOC_PPC64_D28, BFD_RELOC_PPC64_PCREL28): New reloc enums. * elf64-ppc.c (PNOP): Define. (ppc64_elf_howto_raw): Add reloc howtos for new relocations. (ppc64_elf_reloc_type_lookup): Translate new bfd reloc numbers. (ppc64_elf_ha_reloc): Adjust addend for highera34 and highesta34 relocs. (ppc64_elf_prefix_reloc): New function. (struct ppc_link_hash_table): Add notoc_plt. (is_branch_reloc): Add R_PPC64_PLTCALL_NOTOC. (is_plt_seq_reloc): Add R_PPC64_PLT_PCREL34, R_PPC64_PLT_PCREL34_NOTOC, and R_PPC64_PLTSEQ_NOTOC. (ppc64_elf_check_relocs): Handle pcrel got and plt relocs. Set has_pltcall for section on seeing R_PPC64_PLTCALL_NOTOC. Handle possible need for dynamic relocs on non-pcrel powerxx relocs. (dec_dynrel_count): Handle non-pcrel powerxx relocs. (ppc64_elf_inline_plt): Handle R_PPC64_PLTCALL_NOTOC. (toc_adjusting_stub_needed): Likewise. (ppc64_elf_tls_optimize): Handle R_PPC64_PLTSEQ_NOTOC. (ppc64_elf_relocate_section): Handle new powerxx relocs. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Support @pcrel, @got@pcrel, @plt@pcrel, @higher34, @highera34, @highest34, and @highesta34. (fixup_size): Handle new powerxx relocs. (md_assemble): Warn for @pcrel on non-prefix insns. Accept @l, @h and @ha on prefix insns, and infer reloc without any @ suffix. Translate powerxx relocs to suit DQ and DS field instructions. Include operand tests as well as opcode test to translate BFD_RELOC_HI16_S to BFD_RELOC_PPC_16DX_HA. (ppc_fix_adjustable): Return false for pcrel GOT and PLT relocs. (md_apply_fix): Handle new powerxx relocs. * config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): Accept BFD_RELOC_PPC64_ADDR16_HIGHER34, BFD_RELOC_PPC64_ADDR16_HIGHERA34, BFD_RELOC_PPC64_ADDR16_HIGHEST34, BFD_RELOC_PPC64_ADDR16_HIGHESTA34, BFD_RELOC_PPC64_D34, and BFD_RELOC_PPC64_D28. * testsuite/gas/ppc/prefix-reloc.d, * testsuite/gas/ppc/prefix-reloc.s: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2019-05-23include: add elf/bpf.hJose E. Marchesi1-0/+45
This patch adds a header file with BPF-specific ELF definitions. In particular, the architecture relocations. include/ChangeLog: 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> * elf/bpf.h: New file.
2019-05-16[PATCH 1/57][Arm][GAS]: Add support for +mve and +mve.fpAndre Vieira1-0/+1
bfd/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * elf32-arm.c (elf32_arm_merge_eabi_attributes): Add case for Tag_MVE_arch. binutils/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values. (arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch. elfcpp/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * arm.h (Tag_MVE_arch): Define new enum value. gas/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (mve_ext, mve_fp_ext): New features. (armv8_1m_main_ext_table): Add new extensions. (aeabi_set_public_attributes): Translate new features to new build attributes. (arm_convert_symbolic_attribute): Add Tag_MVE_arch. * doc/c-arm.texi: Document new extensions and new build attribute. include/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * elf/arm.h (Tag_MVE_arch): Define new enum value. * opcode/arm.h (FPU_MVE, FPU_MVE_FP): New MACROs for new features.
2019-04-15[binutils, ARM, 10/16] BFCSEL infrastructure with new global reloc ↵Andre Vieira1-0/+1
R_ARM_THM_BF12 This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the BFCSEL instructions which is one of the first instructions in Arm that have more than one relocations in them. This adds a new relocation R_ARM_THM_BF12. The inconsistency between external R_ARM_THM_BF12 and internal BFD_RELOC_ARM_THUMB_BF13 is because internally we count the static bit-0 of the immediate and we don't externally. ChangeLog entries are as follows : ChangeLog entries are as follows : *** bfd/ChnageLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_BF13): New. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. * elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF13. (elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF13 and R_ARM_THM_BF12 together. (elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF13. *** elfcpp/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * arm.h (R_ARM_THM_BF12): New relocation code. *** gas/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_BF13. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. *** include/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF12. *** opcodes/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %Z pattern.
2019-04-15[binutils, ARM, 8/16] BFL infrastructure with new global reloc R_ARM_THM_BF18Andre Vieira1-0/+1
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the BFL instructions which is one of the first instructions in Arm that have more than one relocations in them. This adds a new relocation R_ARM_THM_BF18. The inconsistency between external R_ARM_THM_BF18 and internal BFD_RELOC_ARM_THUMB_BF19 is because internally we count the static bit-0 of the immediate and we don't externally. ChangeLog entries are as follows : *** bfd/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_BF19): New * libbfd.h: Regenerated. * bfd-in2.h: Regenerated. * bfd-elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF18. (elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF19 and R_ARM_THM_BF18 together. (elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF19. *** elfcpp/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm.h (R_ARM_THM_BF18): New relocation code. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_BF19. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. *** include/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF18. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %Y pattern.
2019-04-15[binutils, ARM, 5/16] BF insns infrastructure with new global reloc ↵Andre Vieira1-0/+1
R_ARM_THM_BF16 This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the BF instructions which is one of the first instructions in Arm that have more than one relocations in them. This is the third infrastructure patch that adds a new relocation R_ARM_THM_BF16. The inconsistency between external R_ARM_THM_BF16 and internal BFD_RELOC_ARM_THUMB_BF17 is because internally we count the static bit-0 of the immediate and we don't externally. ChangeLog entries are as follows : *** bfd/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_BF17): New enum. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. * bfd-elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF16. (elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF17 and R_ARM_THM_BF16 together. (get_value_helper): New reloc helper. (elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF16. *** elfcpp/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm.h (R_ARM_THM_BF16): New relocation code. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_BF17. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. *** include/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF16. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %W pattern.
2019-04-15[binutils, ARM, 1/16] Add support for Armv8.1-M Mainline CLIAndre Vieira1-1/+2
The patch is straightforward, it does the following: - support the new Tag_CPU_arch build attribute value, ie.: + declare the new value + update all the asserts forcing logic to be reviewed for new architectures + create a corresponding bfd_mach_arm_8_1M_MAIN enumerator in bfd and add mapping from Tag_CPU_arch to it + teach readelf about new Tag_CPU_arch value - declare armv8.1-m.main as a supported architecture value - define Armv8.1-M Mainline in terms of feature bits available - tell objdump mapping from bfd_mach_arm_8_1M_MAIN enumerator to feature bits available - update architecture-specific logic in gas and bfd guarded by the asserts mentioned above. - tests for all the above ChangeLog entries are as follows: *** bfd/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * archures.c (bfd_mach_arm_8_1M_MAIN): Define. * bfd-in2.h: Regenerate. * cpu-arm.c (arch_info_struct): Add entry for Armv8.1-M Mainline. * elf32-arm.c (using_thumb_only): Return true for Armv8.1-M Mainline and update assert. (using_thumb2): Likewise. (using_thumb2_bl): Update assert. (arch_has_arm_nop): Likewise. (bfd_arm_get_mach_from_attributes): Add case for Armv8.1-M Mainline. (tag_cpu_arch_combine): Add logic for Armv8.1-M Mainline merging. *** binutils/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline. *** gas/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * config/tc-arm.c (cpu_arch_ver): Add entry for Armv8.1-M Mainline Tag_CPU_arch build attribute value. Reindent. (get_aeabi_cpu_arch_from_fset): Update assert. (aeabi_set_public_attributes): Update assert for Tag_DIV_use logic. * testsuite/gas/arm/attr-march-armv8_1-m.main.d: New test. *** include/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * elf/arm.h (TAG_CPU_ARCH_V8_1M_MAIN): new macro. (MAX_TAG_CPU_ARCH): Set value to above macro. * opcode/arm.h (ARM_EXT2_V8_1M_MAIN): New macro. (ARM_AEXT_V8_1M_MAIN): Likewise. (ARM_AEXT2_V8_1M_MAIN): Likewise. (ARM_ARCH_V8_1M_MAIN): Likewise. *** ld/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * testsuite/ld-arm/attr-merge-13.attr: New test. * testsuite/ld-arm/attr-merge-13a.s: New test. * testsuite/ld-arm/attr-merge-13b.s: New test. *** opcodes/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * arm-dis.c (select_arm_features): Add logic for Armv8.1-M Mainline.
2019-04-08x86: Define GNU_PROPERTY_X86_ISA_1_AVX512_BF16H.J. Lu1-0/+1
Update assembler and readelf to support #define GNU_PROPERTY_X86_ISA_1_AVX512_BF16 (1U << 24) for AVX512_BF16. binutils/ * readelf.c (decode_x86_isa): Handle GNU_PROPERTY_X86_ISA_1_AVX512_BF16. * testsuite/binutils-all/i386/pr21231b.d: Updated. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. gas/ * config/tc-i386.c (output_insn): Support GNU_PROPERTY_X86_ISA_1_AVX512_BF16. * testsuite/gas/i386/property-2.s: Add AVX512_BF16 test. * testsuite/gas/i386/property-2.d: Updated. * testsuite/gas/i386/x86-64-property-2.d: Likewise. include/ * elf/common.h (GNU_PROPERTY_X86_ISA_1_AVX512_BF16): New.
2019-03-13[BFD, LD, AArch64, 3/3] Add --pac-plt to enable PLTs protected with PAC.Sudakshina Das1-0/+1
This is part of the patch series to add support for BTI and PAC in AArch64 linker. 1) This patch adds new definitions of PAC enabled PLTs and both BTI and PAC enabled PLTs. 2) It also defines the new dynamic tag DT_AARCH64_PAC_PLT for the PAC enabled PLTs. 3) This patch adds a new ld command line option: --pac-plt. In the presence of this option, the linker uses the PAC enabled PLTs and marks with DT_AARCH64_PAC_PLT. 4) In case both BTI and PAC are enabled the linker should pick PLTs enabled with both and also use dynamic tags for both. All these are made according to the new AArch64 ELF ABI https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4 *** bfd/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * elfnn-aarch64.c (PLT_PAC_ENTRY_SIZE, PLT_PAC_SMALL_ENTRY_SIZE): New. (PLT_BTI_PAC_ENTRY_SIZE, PLT_BTI_PAC_SMALL_ENTRY_SIZE): New. (setup_plt_values): Account for PAC or PAC and BTI enabled PLTs. (elfNN_aarch64_size_dynamic_sections): Add checks for PLT_BTI_PAC and PLT_PAC_PLT. (elfNN_aarch64_finish_dynamic_sections): Account for PLT_BTI_PAC. (get_plt_type): Add case for DT_AARCH64_PAC_PLT. (elfNN_aarch64_plt_sym_val): Add cases for PLT_BTI_PAC and PLT_PAC. *** binutils/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * readelf.c (get_aarch64_dynamic_type): Add case for DT_AARCH64_PAC_PLT. (dynamic_section_aarch64_val): Likewise. *** include/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * elf/aarch64.h (DT_AARCH64_PAC_PLT): New. *** ld/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * NEWS: Document --pac-plt. * emultempl/aarch64elf.em (OPTION_PAC_PLT): New. (PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Add pac-plt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_PAC_PLT. * testsuite/ld-aarch64/aarch64-elf.exp: Add the following tests. * testsuite/ld-aarch64/bti-pac-plt-1.d: New test. * testsuite/ld-aarch64/bti-pac-plt-2.d: New test. * testsuite/ld-aarch64/pac-plt-1.d: New test. * testsuite/ld-aarch64/pac-plt-2.d: New test. * testsuite/ld-aarch64/bti-plt-1.s: Add .ifndef directive.
2019-03-13[BFD, LD, AArch64, 2/3] Add --force-bti to enable BTI and to select BTI ↵Sudakshina Das1-0/+2
enabled PLTs This is part of the patch series to add support for BTI and PAC in AArch64 linker. 1) This patch adds a new ld command line option: --force-bti. In the presence of this option, the linker enables BTI with the GNU_PROPERTY_AARCH64_FEATURE_1_BTI feature. This gives out warning in case of missing gnu notes for BTI in inputs. 2) It also defines a new set of BTI enabled PLTs. These are used either when all the inputs are marked with GNU_PROPERTY_AARCH64_FEATURE_1_BTI or when the new --force-bti option is used. This required adding new fields in elf_aarch64_link_hash_table so that we could make the PLT related information more generic. 3) It also defines a dynamic tag DT_AARCH64_BTI_PLT. The linker uses this whenever it picks BTI enabled PLTs. All these are made according to the new AArch64 ELF ABI https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4 *** bfd/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> Szabolcs Nagy <szabolcs.nagy@arm.com> * bfd-in.h (aarch64_plt_type, aarch64_enable_bti_type): New. (aarch64_bti_pac_info): New. (bfd_elf64_aarch64_set_options): Add aarch64_bti_pac_info argument. (bfd_elf32_aarch64_set_options): Likewise. * bfd-in2.h: Regenerate * elfnn-aarch64.c (PLT_BTI_ENTRY_SIZE): New. (PLT_BTI_SMALL_ENTRY_SIZE, PLT_BTI_TLSDESC_ENTRY_SIZE): New. (elfNN_aarch64_small_plt0_bti_entry): New. (elfNN_aarch64_small_plt_bti_entry): New. (elfNN_aarch64_tlsdesc_small_plt_bti_entry): New. (elf_aarch64_obj_tdata): Add no_bti_warn and plt_type fields. (elf_aarch64_link_hash_table): Add plt0_entry, plt_entry and tlsdesc_plt_entry_size fields. (elfNN_aarch64_link_hash_table_create): Initialise the new fields. (setup_plt_values): New helper function. (bfd_elfNN_aarch64_set_options): Use new bp_info to set plt sizes and bti enable type. (elfNN_aarch64_allocate_dynrelocs): Use new size members instead of fixed macros. (elfNN_aarch64_size_dynamic_sections): Likewise and add checks. (elfNN_aarch64_create_small_pltn_entry): Use new generic pointers to plt stubs instead of fixed ones and update filling them according to the need for bti. (elfNN_aarch64_init_small_plt0_entry): Likewise. (elfNN_aarch64_finish_dynamic_sections): Likewise. (get_plt_type, elfNN_aarch64_get_synthetic_symtab): New. (elfNN_aarch64_plt_sym_val): Update size accordingly. (elfNN_aarch64_link_setup_gnu_properties): Set up plts if BTI GNU NOTE is set. (bfd_elfNN_get_synthetic_symtab): Define. (elfNN_aarch64_merge_gnu_properties): Give out warning with --force-bti and mising BTI NOTE SECTION. *** binutils/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> Szabolcs Nagy <szabolcs.nagy@arm.com> * readelf.c (get_aarch64_dynamic_type): New. (get_dynamic_type): Use above for EM_AARCH64. (dynamic_section_aarch64_val): New. (process_dynamic_section): Use above for EM_AARCH64. *** include/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> Szabolcs Nagy <szabolcs.nagy@arm.com> * elf/aarch64.h (DT_AARCH64_BTI_PLT): New. *** ld/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> Szabolcs Nagy <szabolcs.nagy@arm.com> * NEWS: Document --force-bti. * emultempl/aarch64elf.em (plt_type, bti_type, OPTION_FORCE_BTI): New. (PARSE_AND_LIST_SHORTOPTS, PARSE_AND_LIST_OPTIONS): Add force-bti. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_FORCE_BTI. * testsuite/ld-aarch64/aarch64-elf.exp: Add all the tests below. * testsuite/ld-aarch64/bti-plt-1.d: New test. * testsuite/ld-aarch64/bti-plt-1.s: New test. * testsuite/ld-aarch64/bti-plt-2.s: New test. * testsuite/ld-aarch64/bti-plt-2.d: New test. * testsuite/ld-aarch64/bti-plt-3.d: New test. * testsuite/ld-aarch64/bti-plt-4.d: New test. * testsuite/ld-aarch64/bti-plt-5.d: New test. * testsuite/ld-aarch64/bti-plt-6.d: New test. * testsuite/ld-aarch64/bti-plt-7.d: New test. * testsuite/ld-aarch64/bti-plt-so.s: New test. * testsuite/ld-aarch64/bti-plt.ld: New test.
2019-03-13[BFD, LD, AArch64, 1/3] Add support for GNU PROPERTIES in AArch64 for BTI ↵Sudakshina Das1-0/+6
and PAC This is part of the patch series to add support for BTI and PAC in AArch64 linker. This patch implements the following: 1) This extends in the gnu property support in the linker for AArch64 by defining backend hooks for elf_backend_setup_gnu_properties, elf_backend_merge_gnu_properties and elf_backend_parse_gnu_properties. 2) It defines AArch64 specific GNU property GNU_PROPERTY_AARCH64_FEATURE_1_AND and 2 bit for BTI and PAC in it. 3) It also adds support in readelf.c to read and print these new GNU properties in AArch64. All these are made according to the new AArch64 ELF ABI https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4 *** bfd/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * elf-properties.c (_bfd_elf_link_setup_gnu_properties): Exclude linker created inputs from merge. * elfnn-aarch64.c (struct elf_aarch64_obj_tdata): Add field for GNU_PROPERTY_AARCH64_FEATURE_1_AND properties. (elfNN_aarch64_link_setup_gnu_properties): New. (elfNN_aarch64_merge_gnu_properties): New. (elf_backend_setup_gnu_properties): Define for AArch64. (elf_backend_merge_gnu_properties): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_link_setup_gnu_properties): Define. (_bfd_aarch64_elf_parse_gnu_properties): Define. (_bfd_aarch64_elf_merge_gnu_properties): Define. * elfxx-aarch64.h (_bfd_aarch64_elf_link_setup_gnu_properties): Declare. (_bfd_aarch64_elf_parse_gnu_properties): Declare. (_bfd_aarch64_elf_merge_gnu_properties): Declare. (elf_backend_parse_gnu_properties): Define for AArch64. *** binutils/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * readelf.c (decode_aarch64_feature_1_and): New. (print_gnu_property_note): Add case for AArch64 gnu notes. *** include/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * elf/common.h (GNU_PROPERTY_AARCH64_FEATURE_1_AND): New. (GNU_PROPERTY_AARCH64_FEATURE_1_BTI): New. (GNU_PROPERTY_AARCH64_FEATURE_1_PAC): New. *** ld/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * NEWS: Document GNU_PROPERTY_AARCH64_FEATURE_1_BTI and GNU_PROPERTY_AARCH64_FEATURE_1_PAC. * testsuite/ld-aarch64/aarch64-elf.exp: Add run commands for new tests. * testsuite/ld-aarch64/property-bti-pac1.d: New test. * testsuite/ld-aarch64/property-bti-pac1.s: New test. * testsuite/ld-aarch64/property-bti-pac2.d: New test. * testsuite/ld-aarch64/property-bti-pac2.s: New test. * testsuite/ld-aarch64/property-bti-pac3.d: New test.
2019-02-20AArch64: Add pauth core file sectionAlan Hayward1-0/+2
Used for the AArch64 pointer authentication code mask registers in Arm v8.3-a. NT_ARM_PAC_MASK matches the value in Linux include/uapi/linux/elf.h include/ChangeLog: * elf/common.h (NT_ARM_PAC_MASK): Add define. bfd/ChangeLog: * elf-bfd.h (elfcore_write_aarch_pauth): Add declaration. * elf.c (elfcore_grok_aarch_pauth): New function. (elfcore_grok_note): Check for NT_ARM_PAC_MASK. (elfcore_write_aarch_pauth): New function. (elfcore_write_register_note): Check for AArch64 pauth section.
2019-01-16RISC-V: Support ELF attribute for gas and readelf.Jim Wilson1-0/+16
2019-01-16 Kito Cheng <kito@andestech.com> Nelson Chu <nelson@andestech.com> bfd/ * elfnn-riscv.c (riscv_elf_obj_attrs_arg_type): New. (elf_backend_obj_attrs_vendor): Define. (elf_backend_obj_attrs_section_type): Likewise. (elf_backend_obj_attrs_section): Likewise. (elf_backend_obj_attrs_arg_type): Define as riscv_elf_obj_attrs_arg_type. * elfxx-riscv.c (riscv_estimate_digit): New. (riscv_estimate_arch_strlen1): Likewise. (riscv_estimate_arch_strlen): Likewise. (riscv_arch_str1): Likewise. (riscv_arch_str): Likewise. * elfxx-riscv.h (riscv_arch_str): Declare. binutils/ * readelf.c (get_riscv_section_type_name): New function. (get_section_type_name): Add handler for RISC-V. (riscv_attr_tag_t): Declare. (riscv_attr_tag): New. (display_riscv_attribute): New function. (process_attributes): Add handler for RISC-V. * testsuite/binutils-all/strip-3.d: Remove .riscv.attribute section. gas/ * config/tc-riscv.c (DEFAULT_RISCV_ATTR): Define to 0 if not defined. (riscv_set_options): Add `arch_attr` field. (riscv_opts): Set default value for arch_attr. (riscv_write_out_arch_attr): New. (riscv_set_public_attributes): Likewise. (riscv_md_end): Likewise. (riscv_convert_symbolic_attribute): Likewise. (s_riscv_attribute): Likewise. (explicit_arch_attr): Likewise. (riscv_pseudo_table): Add .attribute to the table. (options): Add OPTION_ARCH_ATTR and OPTION_NO_ARCH_ATTR enumeration constants. (md_longopts): Add `march-attr' and `mno-arch-attr' options. (md_parse_option): Handle the new options. (md_show_usage): Document the `march-attr' option. * config/tc-riscv.h (md_end): Define as riscv_md_end (riscv_md_end): Declare. (CONVERT_SYMBOLIC_ATTRIBUTE): Define as riscv_convert_symbolic_attribute. (riscv_convert_symbolic_attribute): Declare. (start_assemble): Declare. * testsuite/gas/elf/elf.exp: Adjust test case for section2.e. * testsuite/gas/elf/section2.e-riscv: New. * testsuite/gas/riscv/attribute-01.d: New test * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-04.s: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. * testsuite/gas/riscv/attribute-05.s: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-06.s: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * testsuite/gas/riscv/attribute-07.s: Likewise. * testsuite/gas/riscv/attribute-08.d: Likewise. * testsuite/gas/riscv/attribute-08.s: Likewise. * testsuite/gas/riscv/attribute-unknown.d: Likewise. * testsuite/gas/riscv/attribute-unknown.s: Likewise. * testsuite/gas/riscv/empty.l: Likewise. * doc/c-riscv.texi (.attribute): Add documentation. * configure.ac (--enable-default-riscv-attribute): New options. * configure: Re-generate. * config.in: Re-generate. include/ * elf/riscv.h (SHT_RISCV_ATTRIBUTES): Define. (Tag_RISCV_arch): Likewise. (Tag_RISCV_priv_spec): Likewise. (Tag_RISCV_priv_spec_minor): Likewise. (Tag_RISCV_priv_spec_revision): Likewise. (Tag_RISCV_unaligned_access): Likewise. (Tag_RISCV_stack_align): Likewise.
2019-01-05RX: include - Add RXv3 support.Yoshinori Sato1-1/+2
* elf/rx.h (EF_RX_CPU_MASK): Update new bits. (E_FLAG_RX_V3): New RXv3 type. * opcode/rx.h (RX_Size): Add double size. (RX_Operand_Type): Add double FPU registers. (RX_Opcode_ID): Add new instuctions.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra81-81/+81
2018-12-14elf: Add PT_GNU_PROPERTY segment typeH.J. Lu1-3/+1
Linkers group input note sections with the same name into one output note section with the same name. One output note section is placed in one PT_NOTE segment. New linkers merge all input .note.gnu.property sections into one output .note.gnu.property section with a single NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older linkers treat input .note.gnu.property section as a generic note section and just concatenate all input .note.gnu.property sections into one output .note.gnu.property section without merging them, we may see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which are invalid. GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such that linker sets the bit for non-relocatable outputs. But it isn't sufficient: 1. It doesn't cover generic properties. 2. When -mx86-used-note=yes is passed to x86 assembler, the GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED property in object file and older linkers generate invalid NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit set. I am proposing the following changes: 1. Add PT_GNU_PROPERTY segment type: # define PT_GNU_PROPERTY (PT_LOOS + 0x474e553) which covers .note.gnu.property section. 2. Remove GNU_PROPERTY_X86_UINT32_VALID. bfd/ PR ld/23900 * elf.c (get_program_header_size): Add a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. (_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. * elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set GNU_PROPERTY_X86_UINT32_VALID. binutils/ PR ld/23900 * readelf.c (get_segment_type): Support PT_GNU_PROPERTY. (decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID. (decode_x86_feature_1): Likewise. (decode_x86_feature_2): Likewise. (print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID check. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/i386/pr21231b.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. gas/ PR ld/23900 * config/tc-i386.c (x86_cleanup): Don't set GNU_PROPERTY_X86_UINT32_VALID. * testsuite/gas/i386/property-1.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. include/ PR ld/23900 * elf/common.h (PT_GNU_PROPERTY): New. (GNU_PROPERTY_X86_UINT32_VALID): Removed. ld/ PR ld/23900 * testsuite/ld-elf/elf.exp: Run PR ld/23900 test. * testsuite/ld-elf/pr23900-1-32.rd: New file. * testsuite/ld-elf/pr23900-1-64.rd: Likewise. * testsuite/ld-elf/pr23900-1.d: Likewise. * testsuite/ld-elf/pr23900-1.s: Likewise. * testsuite/ld-elf/pr23900-2.s: Likewise. * testsuite/ld-elf/pr23900-2a.d: Likewise. * testsuite/ld-elf/pr23900-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-1.d: Adjusted. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/pr23372c.d: Expect <None> for GNU_PROPERTY_X86_ISA_1_USED. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23372d-x32.d: Likewise. * testsuite/ld-x86-64/pr23372d.d: Likewise. * testsuite/ld-x86-64/property-x86-5a.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. * testsuite/ld-x86-64/property-x86-5b.s: Likewise.
2018-10-26Support AT_HWCAP2 on FreeBSD.John Baldwin1-0/+1
include/ChangeLog: * elf/common.h (AT_FREEBSD_HWCAP2): Define. gdb/ChangeLog: * fbsd-tdep.c (fbsd_print_auxv_entry): Handle AT_FREEBSD_HWCAP2.
2018-10-23S12Z: New 32 bit Reloc.John Darrington1-1/+2
Third party tools produce 32 bit relocs at index 6 with strange properties. This change moves the existing 32 bit reloc (R_S12Z_EXT32) to index 7 and introduces a new one (R_S12Z_CW32) at index 6 to try to support code generated by these tools. * bfd/elf32-s12z.c (elf_s12z_howto_table) [R_S12Z_CW32]: New member. * binutils/readelf.c (is_32bit_abs_reloc): Reloc type 7 is also 32 bit. * include/elf/s12z.h (elf_s12z_reloc_tpe) [RELOC_NUMBER (R_S12Z_CW32)]: New enum.
2018-10-05or1k: Add the l.adrp insn and supporting relocationsStafford Horne1-0/+12
This patch adds the new instruction and relocation as per proposal: https://openrisc.io/proposals/ladrp This is to be added to the spec in an upcoming revision. The new instruction l.adrp loads the page offset of the current instruction offset by a 21-bit immediate shifted left 13-bits. This is meant to be used with a 13-bit lower bit page offset. This allows us to free up the got register r16. l.adrp r3, foo l.ori r4, r3, po(foo) l.lbz r5, po(foo)(r3) l.sb po(foo)(r3), r6 The relocations we add are: - BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry asm: plta() implemented using l.ardp, meaning no need for r16 (the GOT reg) - BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address asm: got() - BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General asm: tlsgd() Dynamic calculation - BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local asm: tlsldm() dynamic calculation - BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial asm: gottp() Executable calculation - BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp instructions) - BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation asm: po() i.e. mem loads, addi etc - BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation asm: po() i.e. mem stores, with split immediate - BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs asm: gotpo() - BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs asm: tlsgdpo() - BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs asm: tlsldmpo() - BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs asm: gottppo() bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * bfd-in2.h: Regenerated. * elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. (or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26. (elf_or1k_link_hash_table): Add field saw_plta. (or1k_final_link_relocate): Add value calculations for new relocations. (or1k_elf_relocate_section): Add section relocations for new relocations. (or1k_write_plt_entry): New function. (or1k_elf_finish_dynamic_sections): Add support for PLTA relocations using new l.adrp instruction. Cleanup PLT relocation code generation. * libbfd.h: Regenerated. * reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc (parse_disp26): Add support for plta() relocations. (parse_disp21): New function. (or1k_rclass): New enum. (or1k_rtype): New enum. (or1k_imm16_relocs): Define new PO and SPO relocation mappings. (parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations. (parse_imm16): Add support for the new 21bit and 13bit relocations. * or1korbis.cpu (f-disp26): Don't assume SI. (f-disp21): New pc-relative 21-bit 13 shifted to right. (insn-opcode): Add ADRP. (l-adrp): New instruction. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. * testsuite/gas/or1k/allinsn.s: Add test for l.adrp. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions. * testsuite/gas/or1k/reloc-1.s: Add tests to generate R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13 relocations. * testsuite/gas/or1k/reloc-1.d: Add relocation results for tests. * testsuite/gas/or1k/reloc-2.s: Add negative tests for store to gotpo(). * testsuite/gas/or1k/reloc-2.l: Add expected error test results. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/or1k.exp: Add test cases for plt generation. * testsuite/ld-or1k/plt1.dd: New file. * testsuite/ld-or1k/plt1.s: New file. * testsuite/ld-or1k/plt1.x.dd: New file. * testsuite/ld-or1k/plta1.dd: New file. * testsuite/ld-or1k/plta1.s: New file. * testsuite/ld-or1k/pltlib.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerated. * or1k-desc.c: Regenerated. * or1k-desc.h: Regenerated. * or1k-dis.c: Regenerated. * or1k-ibld.c: Regenerated. * or1k-opc.c: Regenerated. * or1k-opc.h: Regenerated. * or1k-opinst.c: Regenerated.
2018-10-05or1k: Add relocations for high-signed and low-storesRichard Henderson1-0/+7
This patch adds the following target relocations: - BFD_RELOC_HI16_S High 16-bit relocation, for used with signed asm: ha() lower. - BFD_RELOC_HI16_S_GOTOFF High 16-bit GOT offset relocation for local asm: gotoffha() symbols, for use with signed lower. - BFD_RELOC_OR1K_TLS_IE_AHI16 High 16-bit TLS relocation with initial asm: gottpoffha() executable calculation, for use with signed lower. - BFD_RELOC_OR1K_TLS_LE_AHI16 High 16-bit TLS relocation for local executable asm: tpoffha() variables, for use with signed lower. - BFD_RELOC_OR1K_SLO16 Split lower 16-bit relocation, used with asm: lo() OpenRISC store instructions. - BFD_RELOC_OR1K_GOTOFF_SLO16 Split lower 16-bit GOT offset relocation for asm: gotofflo() local symbols, used with OpenRISC store instructions. - BFD_RELOC_OR1K_TLS_LE_SLO16 Split lower 16-bit relocation for TLS local asm: tpofflo() executable variables, used with OpenRISC store instructions. bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * bfd-in2.h: Regenerated. * elf32-or1k.c (N_ONES): New macro. (or1k_elf_howto_table): Fix R_OR1K_PLT26 to complain on overflow. Add definitions for R_OR1K_TLS_TPOFF, R_OR1K_TLS_DTPOFF, R_OR1K_TLS_DTPMOD, R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16. (or1k_reloc_map): Add entries for BFD_RELOC_HI16_S, BFD_RELOC_LO16_GOTOFF, BFD_RELOC_HI16_GOTOFF, BFD_RELOC_HI16_S_GOTOFF, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16, BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_LE_SLO16. (or1k_reloc_type_lookup): Change search loop to start ad index 0 and also check results before returning. (or1k_reloc_name_lookup): Simplify loop to use R_OR1K_max as index limit. (or1k_final_link_relocate): New function. (or1k_elf_relocate_section): Add support for new AHI and SLO relocations. Use or1k_final_link_relocate instead of generic _bfd_final_link_relocate. (or1k_elf_check_relocs): Add support for new AHI and SLO relocations. * reloc.c: Add new enums for BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16, BFD_RELOC_OR1K_TLS_LE_SLO16. Remove unused BFD_RELOC_OR1K_GOTOFF_HI16 and BFD_RELOC_OR1K_GOTOFF_LO16. * libbfd.h: Regenerated. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc: Add RTYPE_ enum. (INVALID_STORE_RELOC): New string. (or1k_imm16_relocs): New array array. (parse_reloc): New static function that just does the parsing. (parse_imm16): New static function for generic parsing. (parse_simm16): Change to just call parse_imm16. (parse_simm16_split): New function. (parse_uimm16): Change to call parse_imm16. (parse_uimm16_split): New function. * or1korbis.cpu (simm16-split): Change to use new simm16_split. (uimm16-split): Change to use new uimm16_split. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/gas/or1k/allinsn.d (l_ha): Add result for ha() relocation. * testsuite/gas/or1k/allinsn.s (l_ha): Add test for ha() relocations. * testsuite/gas/or1k/allinsn.exp: Renamed to or1k.exp. * testsuite/gas/or1k/or1k.exp: Add reloc-2 list test. * testsuite/gas/or1k/reloc-1.d: New file. * testsuite/gas/or1k/reloc-1.s: New file. * testsuite/gas/or1k/reloc-2.l: New file. * testsuite/gas/or1k/reloc-2.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/offsets1.d: New file. * testsuite/ld-or1k/offsets1.s: New file. * testsuite/ld-or1k/or1k.exp: New file. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerate.
2018-10-01[ARC] Fixed issue with DTSOFF relocs.Cupertino Miranda1-1/+1
Inserted offset in final section in the GOT entry of type DTSOFF soon to be relocated by the dynamic loader. bfd/ 2018-09-06 Cupertino Miranda <cmiranda@synopsys.com> * arc-got.h (relocate_fix_got_relocs_for_got_info): Changed. Take TLS section alignment in consideration for this relocation. * elf32-arc.c (FINAL_SECTSTART): Added this formula macro. (ARC_TLS_DTPOFF) Updated reloc to use new created macro instead.
2018-10-01[ARC] Fixes TLS failures related to tls-align.Cupertino Miranda1-1/+1
This patch fixes glibc testcase in nptl/tls-align. bfd/ 2018-08-01 Cupertino Miranda <cmiranda@synopsys.com> * arc-got.h (relocate_fix_got_relocs_for_got_info): Changed, fixed TCB_SIZE offsize to include section alignment. * elf32-arc.c (arc_special_overflow_checks): Likewise. include/ 2018-08-01 Cupertino Miranda <cmiranda@synopsys.com> * arc-reloc.def (ARC_TLS_LE_32): Updated reloc formula.
2018-09-21ELF: Don't include zero size sections at start of PT_NOTE segmentH.J. Lu1-4/+6
We shouldn't include zero size sections at start of PT_NOTE segment, similar to PT_DYNAMIC segment. PR binutils/23694 * include/elf/internal.h (ELF_SECTION_IN_SEGMENT_1): Don't include zero size sections at start of PT_NOTE segment.
2018-09-20Andes Technology has good news for you, we plan to update the nds32 port of ↵Nick Clifton1-20/+45
binutils on upstream! We have not only removed all unsupported and obsolete code, but also supported lost of new features, including better link-time relaxations and TLS implementations. Besides, the files generated by the newly assembler and linker usually get higher performance and more optimized code size. ld * emultempl/nds32elf.em (hyper_relax): New variable. (nds32_elf_create_output_section_statements): the parameters of bfd_elf32_nds32_set_target_option (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax. * emultempl/nds32elf.em (nds32_elf_after_open): Updated. * emultempl/nds32elf.em (tls_desc_trampoline): New variable. * (nds32_elf_create_output_section_statements): Updated. * (nds32_elf_after_parse): Disable relaxations when PIC is enable. * (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline. include * elf/nds32.h: Remove the unused target features. * dis-asm.h (disassemble_init_nds32): Declared. * elf/nds32.h (E_NDS32_NULL): Removed. (E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New. * opcode/nds32.h: Ident. (N32_SUB6, INSN_LW): New macros. (enum n32_opcodes): Updated. * elf/nds32.h: Doc fixes. * elf/nds32.h: Add R_NDS32_LSI. * elf/nds32.h: Add new relocations for TLS. gas * config/tc-nds32.c: Remove the unused target features. (nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp, nds32_set_elf_flags_by_insn, nds32_insert_relax_entry, nds32_apply_fix): Likewise. (nds32_no_ex9_begin): Removed. * config/tc-nds32.c (add_mapping_symbol_for_align, make_mapping_symbol, add_mapping_symbol): New functions. * config/tc-nds32.h (enum mstate): New. (nds32_segment_info_type): Likewise. * configure.ac (--enable-dsp-ext, --enable-zol-ext): New options. * config.in: Regenerated. * configure: Regenerated. * config/tc-nds32.c (nds32_dx_regs): Set the value according to the configuration. (nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext): Likewise. (nds32_dsp_ext): New variable. Set the value according to the configuration. (nds32_zol_ext): Likewise. (asm_desc, nds32_pseudo_opcode_table): Make them static. (nds32_set_elf_flags_by_insn): Updated. (nds32_check_insn_available): Updated. (nds32_str_tolower): New function. * config/tc-nds32.c (relax_table): Updated. (md_begin): Updated. (md_assemble): Use XNEW macro to allocate space for `insn.info', and then remember to free it. (md_section_align): Cast (-1) to ValueT. (nds32_get_align): Cast (~0U) to addressT. (nds32_relax_branch_instructions): Updated. (md_convert_frag): Add new local variable `final_r_type'. (invalid_prev_frag): Add new bfd_boolean parameter `relax'. All callers changed. * config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field. (struct nds32_hint_map): Add `option_list' field. (struct suffix_name, suffix_table): Remove the unused `pic' field. (do_pseudo_b, do_pseudo_bal): Remove the suffix checking. (do_pseudo_la_internal, do_pseudo_pushpopm): Indent. (relax_hint_bias, relax_hint_id_current): New static variables. (reset_bias, relax_hint_begin): New variables. (nds_itoa): New function. (CLEAN_REG, GET_OPCODE): New macros. (struct relax_hint_id): New. (nds32_relax_hint): For .relax_hint directive, we can use `begin' and `end' to mark the relax pattern without giving exactly id number. (nds32_elf_append_relax_relocs): Handle the case that the .relax_hint directives are attached to pseudo instruction. (nds32_elf_save_pseudo_pattern): Change the second parameter from instruction's opcode to byte code. (nds32_elf_build_relax_relation): Add new bfd_boolean parameter `pseudo_hint'. (nds32_lookup_pseudo_opcode): Fix the overflow issue. (enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT. (nds32_elf_record_fixup_exp, relax_ls_table, hint_map, nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name): Updated. * config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6. (enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and NDS32_RELAX_HINT_LA_GOTOFF. * config/tc-nds32.h (relax_ls_table): Add floating load/store to gp relax pattern. (hint_map, nds32_find_reloc_table): Likewise. * configure.ac: Define NDS32_LINUX_TOOLCHAIN. * configure: Regenerated. * config.in: Regenerated. * config/tc-nds32.h (enum nds32_ramp): Updated. (enum nds32_relax_hint_type): Likewise. * config/tc-nds32.c: Include "errno.h" and "limits.h". (relax_ls_table): Add TLS relax patterns. (nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on each instructions of TLS patterns. (nds32_elf_record_fixup_exp): Updated. (nds32_apply_fix): Likewise. (suffix_table): Add TLSDESC suffix. binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number from 215 to 255 for NDS32. bfd * elf32-nds32.c (nds32_elf_relax_loadstore): Remove the unused target features. (bfd_elf32_nds32_set_target_option): Remove the unused parameters. (nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12, nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls, nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff nds32_elf_relax_gotoff_suff, calculate_plt_memory_address, calculate_plt_offset, calculate_got_memory_address, nds32_elf_check_dup_relocs): Removed. All callers changed. * elf32-nds32.h: Remove the unused macros and defines. (elf_nds32_link_hash_table): Remove the unused variable. (bfd_elf32_nds32_set_target_option): Update prototype. (nds32_elf_ex9_init): Removed. * elf32-nds32.c (nds32_convert_32_to_16): Updated. * elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros to initialize array nds32_elf_howto_table in any order without lots of EMPTY_HOWTO. (nds32_reloc_map): Updated. * reloc.c: Add BFD_RELOC_NDS32_LSI. * bfd-in2.h: Regenerated. * bfd/libbfd.h: Regenerated. * elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI. (nds32_reloc_map): Likewise. (nds32_elf_relax_flsi): New function. (nds32_elf_relax_section): Support floating load/store relaxation. * elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset): New macro. (struct elf_nds32_link_hash_entry): New `offset_to_gp' field. (struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields. (elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard, nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym): New functions. (nds32_info_to_howto_rel): Add BFD_ASSERT. (bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc, nds32_elf_link_hash_table_create, nds32_elf_relocate_section, nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label, bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated. (nds32_elf_final_sda_base): Improve it to find the better gp value. (insert_nds32_elf_blank): Must consider `len' when inserting blanks. * elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype. (struct elf_nds32_link_hash_table): Add new variable `hyper_relax'. * elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function. (create_got_section): Likewise. (allocate_dynrelocs, nds32_elf_size_dynamic_sections, nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated. (nds32_elf_check_relocs): Fix the issue that the shared library may has TEXTREL entry in the dynamic section. (nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs since the TEXTREL issue is fixed in the nds32_elf_check_relocs. (nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ dynamic entry. (calculate_offset): Remove the unused parameter `pic_ext_target' and related codes. All callers changed. (elf_backend_dtrel_excludes_plt): Disable it temporarily since it will cause some errors for our test cases. * elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the generic object. * reloc.c: Add TLS relocations. * libbfd.h: Regenerated. * bfd-in2.h: Regenerated. * elf32-nds32.h (struct section_id_list_t): New. (elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New prototypes. (elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent): New macro. (nds32_insertion_sort, bfd_elf32_nds32_set_target_option, elf_nds32_link_hash_table): Updated. * elf32-nds32.c (enum elf_nds32_tls_type): New. (struct elf32_nds32_relax_group_t, struct relax_group_list_t): New. (elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type, fls, ones32, list_insert, list_insert_sibling, dump_chain, elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions. (elf_nds32_obj_tdata): Add new fields. (elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros. (nds32_elf_howto_table): Add TLS relocations. (nds32_reloc_map): Likewise. (nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections, nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info, nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option, nds32_elf_check_relocs, allocate_dynrelocs): Updated. (nds32_elf_relax_section): Call nds32_elf_unify_tls_model. (dtpoff_base): Rename it to `gottpof' and then update it. opcodes * nds32-asm.c (operand_fields): Remove the unused fields. (nds32_opcodes): Remove the unused instructions. * nds32-dis.c (nds32_ex9_info): Removed. (nds32_parse_opcode): Updated. (print_insn_nds32): Likewise. * nds32-asm.c (config.h, stdlib.h, string.h): New includes. (LEX_SET_FIELD, LEX_GET_FIELD): Update defines. (nds32_asm_init, build_operand_hash_table, build_keyword_hash_table, build_opcode_hash_table): New functions. (nds32_keyword_table, nds32_keyword_count_table, nds32_field_table, nds32_opcode_table): New. (hw_ktabs): Declare it to a pointer rather than an array. (build_hash_table): Removed. * nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT, SYN_ROPT and upadte HW_GPR and HW_INT. * nds32-dis.c (keywords): Remove const. (match_field): New function. (nds32_parse_opcode): Updated. * disassemble.c (disassemble_init_for_target): Add disassemble_init_nds32. * nds32-dis.c (eum map_type): New. (nds32_private_data): Likewise. (get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid, nds32_add_opcode_hash_table, disassemble_init_nds32): New functions. (print_insn_nds32): Updated. * nds32-asm.c (parse_aext_reg): Add new parameter. (parse_re, parse_re2, parse_aext_reg): Only reduced registers are allowed to use. All callers changed. * nds32-asm.c (keyword_usr, keyword_sr): Updated. (operand_fields): Add new fields. (nds32_opcodes): Add new instructions. (keyword_aridxi_mx): New keyword. * nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX and NASM_ATTR_ZOL. (ALU2_1, ALU2_2, ALU2_3): New macros. * nds32-dis.c (nds32_filter_unknown_insn): Updated.
2018-09-20Handle missing Solaris auxv entriesRainer Orth1-3/+9
Currently, three tests FAIL on Solaris 11.4+ (amd64-pc-solaris2.11 and sparcv9-sun-solaris2.11): info auxv [...] 2009 AT_SUN_HWCAP Machine-dependent CPU capability hints 0x3f5ff7 2023 ??? 0x0 0 AT_NULL End of vector 0x0 (gdb) WARNING: Unrecognized tag value: 2023 ??? 0x0 FAIL: gdb.base/auxv.exp: info auxv on live process info auxv 4294969310 ??? 0x7fffbfffe410 9225589753816 ??? 0x7fffbfffe45c [...] WARNING: Unrecognized tag value: 4294969310 ??? 0x7fffbfffe410 WARNING: Unrecognized tag value: 9225589753816 ??? 0x7fffbfffe45c WARNING: Unrecognized tag value: 140733193388037 ??? 0x6 [...] 2009 AT_SUN_HWCAP Machine-dependent CPU capability hints 0x3f5ff7 2023 ??? 0x0 0 AT_NULL End of vector 0x0 (gdb) WARNING: Unrecognized tag value: 2023 ??? 0x0 UNRESOLVED: gdb.base/auxv.exp: info auxv on native core dump info auxv [...] 2009 AT_SUN_HWCAP Machine-dependent CPU capability hints 0x3f5ff7 2023 ??? 0x0 0 AT_NULL End of vector 0x0 (gdb) WARNING: Unrecognized tag value: 2023 ??? 0x0 FAIL: gdb.base/auxv.exp: info auxv on gcore-created dump The following patch fixes this by introducing the missing AT_SUN_* values from Solaris 11.4+ <sys/auxv.h>. This lets the live and gcore-created dump tests PASS. I don't know yet what's the reason for those weird 'Unrecognized tag value' warnings with native core dumps is; elfdump -n certainly doesn't show them. However, native core dumps still need quite some work (mostly in bfd) in this and other areas. Tested on amd64-pc-solaris2.11. gdb: * auxv.c (default_print_auxv_entry): Reflect AT_SUN_CAP_HW1 renaming. Handle AT_SUN_EMULATOR, AT_SUN_BRANDNAME, AT_SUN_BRAND_AUX1, AT_SUN_BRAND_AUX2, AT_SUN_BRAND_AUX3, AT_SUN_CAP_HW2. include: * elf/common.h (AT_SUN_HWCAP): Rename to ... (AT_SUN_CAP_HW1): ... this. Retain old name for backward compatibility. (AT_SUN_EMULATOR, AT_SUN_BRANDNAME, AT_SUN_BRAND_AUX1) (AT_SUN_BRAND_AUX2, AT_SUN_BRAND_AUX3, AT_SUN_CAP_HW2): Define.
2018-08-31PowerPC64 higher REL16 relocationsAlan Modra1-5/+11
There are occasions where someone might want to build a 64-bit pc-relative offset from 16-bit pieces. This adds the necessary REL16 relocs corresponding to existing ADDR16 relocs that can be used to build 64-bit absolute values. include/ * elf/ppc64.h (R_PPC64_REL16_HIGH, R_PPC64_REL16_HIGHA), (R_PPC64_REL16_HIGHER, R_PPC64_REL16_HIGHERA), (R_PPC64_REL16_HIGHEST, R_PPC64_REL16_HIGHESTA): Define. (R_PPC64_LO_DS_OPT, R_PPC64_16DX_HA): Bump value. bfd/ * reloc.c (BFD_RELOC_PPC64_REL16_HIGH, BFD_RELOC_PPC64_REL16_HIGHA), (BFD_RELOC_PPC64_REL16_HIGHER, BFD_RELOC_PPC64_REL16_HIGHERA), (BFD_RELOC_PPC64_REL16_HIGHEST, BFD_RELOC_PPC64_REL16_HIGHESTA): Define. * elf64-ppc.c (ppc64_elf_howto_raw): Add new REL16 howtos. (ppc64_elf_reloc_type_lookup): Translate new REL16 relocs. (ppc64_elf_check_relocs, ppc64_elf_relocate_section): Handle them. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): Allow ADDR16 HIGH, HIGHA, HIGHER, HIGHERA, HIGHEST, and HIGHESTA relocs. Group 16-bit relocs. * config/tc-ppc.c (md_apply_fix): Translate those ADDR16 relocs to REL16 when pcrel. Sort relocs.
2018-08-29[MIPS] Add Loongson 2K1000 proccessor support.Chenghua Xu1-0/+1
bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs264e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS264E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs264e to bfd_mach_mips_gs464e extension. binutils/ * NEWS: Mention Loongson 2K1000 proccessor support. * readelf.c (get_machine_flags): Handle gs264e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS264E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS264E. (mips_cpu_info_table): Add gs264e descriptors. * doc/as.texi (march table): Add gs264e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS264E. * opcode/mips.h (CPU_XXX): New CPU_GS264E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs264e and gs464e. opcodes/ * mips-dis.c (mips_arch_choices): Add gs264e descriptors.
2018-08-29[MIPS] Add Loongson 3A2000/3A3000 proccessor support.Chenghua Xu1-0/+1
bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs464e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS464E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs464e to bfd_mach_mips_gs464 extension. binutils/ * NEWS: Mention Loongson 3A2000/3A3000 proccessor support. * readelf.c (get_machine_flags): Handle gs464e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS464E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS464E. (mips_cpu_info_table): Add gs464e descriptors. * doc/as.texi (march table): Add gs464e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS464E. * opcode/mips.h (CPU_XXX): New CPU_GS464E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs464e and gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464e descriptors.
2018-08-29[MIPS] Add Loongson 3A1000 proccessor support.Chenghua Xu1-2/+1
bfd/ * archures.c (bfd_architecture): Rename bfd_mach_mips_loongson_3a to bfd_mach_mips_gs464. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Likewise. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Likewise. (bfd_mips_isa_ext_mach): Likewise. (bfd_mips_isa_ext): Likewise. (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. binutils/ * NEWS: Mention Loongson 3A1000 proccessor support. * readelf.c (get_machine_flags): Rename loongson-3a to gs464. (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. elfcpp/ * mips.c (EF_MIPS_MACH): Rename E_MIPS_MACH_LS3A to E_MIPS_MACH_GS464. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Rename CPU_LOONGSON_3A to CPU_GS464. (mips_cpu_info_table): Add gs464 descriptors, Keep loongson3a as an alias of gs464 for compatibility. * doc/as.texi (march table): Rename loongson3a to gs464. * testsuite/gas/mips/loongson-3a-mmi.d: Set "ISA Extension" flag to None. gold/ * mips.cc (Mips_mach, add_machine_extensions, elf_mips_mach): Rename loongson3a to gs464. (mips_isa_ext_mach, mips_isa_ext): Delete loongson3a. (infer_abiflags): Use ases instead of isa_ext for infer ABI flags. (elf_mips_mach_name): Rename loongson3a to gs464. include/ * elf/mips.h (E_MIPS_MACH_XXX): Rename E_MIPS_MACH_LS3A to E_MIPS_MACH_GS464. (AFL_EXT_XXX): Delete AFL_EXT_LOONGSON_3A. * opcode/mips.h (INSN_XXX): Delete INSN_LOONGSON_3A. (CPU_XXX): Rename CPU_LOONGSON_3A to CPU_GS464. * opcode/mips.h (mips_isa_table): Delete CPU_LOONGSON_3A case. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Rename loongson3a to gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464 descriptors, Keep loongson3a as an alias of gs464 for compatibility. * mips-opc.c (mips_opcodes): Change Comments.
2018-08-29[MIPS/GAS] Add Loongson EXT2 Instructions support.Chenghua Xu1-1/+2
bfd/ * elfxx-mips.c (print_mips_ases): Add Loongson EXT2 extension. binutils/ * readelf.c (print_mips_ases): Add Loongson EXT2 extension. gas/ * NEWS: Mention Loongson EXTensions R2 (EXT2) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_EXT2 and OPTION_NO_LOONGSON_EXT2. (md_longopts): Likewise. (mips_ases): Define availability for EXT. (mips_convert_ase_flags): Map ASE_LOONGSON_EXT2 to AFL_ASE_LOONGSON_EXT2. (md_show_usage): Add help for -mloongson-ext2 and -mno-loongson-ext2. * doc/as.texi: Document -mloongson-ext2, -mno-loongson-ext2. * doc/c-mips.texi: Document -mloongson-ext2, -mno-loongson-ext2, .set loongson-ext2 and .set noloongson-ext2. * testsuite/gas/mips/loongson-ext2.d: New test. * testsuite/gas/mips/loongson-ext2.s: New test. * testsuite/gas/mips/mips.exp: Run loongson-ext2 test. include/ * elf/mips.h (AFL_ASE_LOONGSON_EXT2): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT2. * opcode/mips.h (ASE_LOONGSON_EXT2): New macro. opcodes/ * mips-dis.c (parse_mips_ase_option): Handle -M loongson-ext option. (print_mips_disassembler_options): Document -M loongson-ext. * mips-opc.c (LEXT2): New macro. (mips_opcodes): Add cto, ctz, dcto, dctz instructions.
2018-08-29[MIPS/GAS] Split Loongson EXT Instructions from loongson3a.Chenghua Xu1-1/+2
bfd/ * elfxx-mips.c (infer_mips_abiflags): Use ases instead of isa_ext for infer ABI flags. (print_mips_ases): Add Loongson EXT extension. binutils/ * readelf.c (print_mips_ases): Add Loongson EXT extension. elfcpp/ * mips.h (AFL_ASE_LOONGSON_EXT): New enum. gas/ * NEWS: Mention Loongson EXTensions (EXT) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_EXT and OPTION_NO_LOONGSON_EXT. (md_longopts): Likewise. (mips_ases): Define availability for EXT. (mips_convert_ase_flags): Map ASE_LOONGSON_EXT to AFL_ASE_LOONGSON_EXT. (mips_cpu_info_table): Add ASE_LOONGSON_EXT for loongson3a. (md_show_usage): Add help for -mloongson-ext and -mno-loongson-ext. * doc/as.texi: Document -mloongson-ext, -mno-loongson-ext. * doc/c-mips.texi: Document -mloongson-ext, -mno-loongson-ext, .set loongson-ext and .set noloongson-ext. * testsuite/gas/mips/loongson-mmi.d: Add ASE flag. include/ * elf/mips.h (AFL_ASE_LOONGSON_EXT): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT. * opcode/mips.h (ASE_LOONGSON_EXT): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add EXT to loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-ext option. (print_mips_disassembler_options): Document -M loongson-ext. * mips-opc.c (IL3A): Delete. * mips-opc.c (LEXT): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LEXT for EXT instructions.
2018-08-29[MIPS/GAS] Split Loongson CAM Instructions from loongson3aChenghua Xu1-1/+2
bfd/ * elfxx-mips.c (print_mips_ases): Add CAM extension. binutils/ * readelf.c (print_mips_ases): Add CAM extension. gas/ * NEWS: Mention Loongson Content Address Memory (CAM) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_CAM and OPTION_NO_LOONGSON_CAM. (md_longopts): Likewise. (mips_ases): Define availability for CAM. (mips_convert_ase_flags): Map ASE_LOONGSON_CAM to AFL_ASE_LOONGSON_CAM. (mips_cpu_info_table): Add ASE_LOONGSON_CAM for loongson3a. (md_show_usage): Add help for -mloongson-cam and -mno-loongson-cam. * doc/as.texi: Document -mloongson-cam, -mno-loongson-cam. * doc/c-mips.texi: Document -mloongson-cam, -mno-loongson-cam, .set loongson-cam and .set noloongson-cam. * testsuite/gas/mips/loongson-3a-2.d: Move cam test to ... * testsuite/gas/mips/loongson-cam.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-3a-2.s: Move cam test to ... * testsuite/gas/mips/loongson-cam.s: Here. * testsuite/gas/mips/loongson-3a-mmi.d: Add ASE flag. * testsuite/gas/mips/mips.exp: Run loongson-cam test. include/ * elf/mips.h (AFL_ASE_LOONGSON_CAM): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_CAM. * opcode/mips.h (ASE_LOONGSON_CAM): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add CAM to loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-cam option. (print_mips_disassembler_options): Document -M loongson-cam. * mips-opc.c (LCAM): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LCAM for CAM instructions.
2018-08-24x86: Update GNU_PROPERTY_X86_XXX macrosH.J. Lu1-24/+88
This patch updates GNU_PROPERTY_X86_XXX macros: 1. GNU_PROPERTY_X86_UINT32_AND_XXX: A 4-byte unsigned integer property. A bit is set if it is set in all relocatable inputs: #define GNU_PROPERTY_X86_UINT32_AND_LO 0xc0000002 #define GNU_PROPERTY_X86_UINT32_AND_HI 0xc0007fff 2. GNU_PROPERTY_X86_UINT32_OR_XXX: A 4-byte unsigned integer property. A bit is set if it is set in any relocatable inputs: #define GNU_PROPERTY_X86_UINT32_OR_LO 0xc0008000 #define GNU_PROPERTY_X86_UINT32_OR_HI 0xc000ffff 3. GNU_PROPERTY_X86_UINT32_OR_AND_XXX: A 4-byte unsigned integer property. A bit is set if it is set in any relocatable inputs and the property is present in all relocatable inputs: #define GNU_PROPERTY_X86_UINT32_OR_AND_LO 0xc0010000 #define GNU_PROPERTY_X86_UINT32_OR_AND_HI 0xc0017fff 4. GNU_PROPERTY_X86_FEATURE_2_NEEDED, GNU_PROPERTY_X86_FEATURE_2_USED and GNU_PROPERTY_X86_FEATURE_2_XXX bits. GNU_PROPERTY_X86_FEATURE_1_AND is unchanged. GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED are updated to better support targeted processors since GNU_PROPERTY_X86_ISA_1_?86 aren't isn't very useful. A new set of GNU_PROPERTY_X86_ISA_1_XXX bits are defined. The previous GNU_PROPERTY_X86_ISA_1_XXX macros are deprecated and renamed to GNU_PROPERTY_X86_COMPAT_ISA_1_XXX. bfd/ * elfxx-x86.c (_bfd_x86_elf_parse_gnu_properties): Handle X86_COMPAT_ISA_1_USED, X86_COMPAT_ISA_1_NEEDED, X86_UINT32_AND_LO, X86_UINT32_AND_HI, X86_UINT32_OR_LO, X86_UINT32_OR_HI, X86_UINT32_OR_AND_LO and X86_UINT32_OR_AND_HI instead of X86_ISA_1_USED, X86_ISA_1_NEEDED and X86_FEATURE_1_AND. (_bfd_x86_elf_merge_gnu_properties): Likewise. (_bfd_x86_elf_link_setup_gnu_properties): Add X86_FEATURE_2_NEEDED instead of X86_ISA_1_NEEDED. (_bfd_x86_elf_link_fixup_gnu_properties): Handle X86_COMPAT_ISA_1_USED, X86_COMPAT_ISA_1_NEEDED, X86_UINT32_AND_LO, X86_UINT32_AND_HI, X86_UINT32_OR_LO, X86_UINT32_OR_HI, X86_UINT32_OR_AND_LO and X86_UINT32_OR_AND_HI instead of X86_ISA_1_USED, X86_ISA_1_NEEDED and X86_FEATURE_1_AND. binutils/ * readelf.c (decode_x86_compat_isa): New function. (decode_x86_feature_2): Likewise. (decode_x86_isa): Updated for new X86_ISA_1_XXX bits. (decode_x86_feature): Renamed to ... (decode_x86_feature_1): This. Remove the type argument. (print_gnu_property_note): Handle X86_COMPAT_ISA_1_USED, X86_COMPAT_ISA_1_NEEDED, X86_UINT32_AND_LO, X86_UINT32_AND_HI, X86_UINT32_OR_LO, X86_UINT32_OR_HI, X86_UINT32_OR_AND_LO and X86_UINT32_OR_AND_HI instead of X86_ISA_1_USED, X86_ISA_1_NEEDED and X86_FEATURE_1_AND. * testsuite/binutils-all/i386/pr21231b.s: Updated to the current GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED values. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494a.s: Likewise. * testsuite/binutils-all/x86-64/pr23494b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494c.s: Likewise. * testsuite/binutils-all/i386/pr21231b.d: Updated. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. include/ * elf/common.h (GNU_PROPERTY_X86_ISA_1_USED): Renamed to ... (GNU_PROPERTY_X86_COMPAT_ISA_1_USED): This. (GNU_PROPERTY_X86_ISA_1_NEEDED): Renamed to ... (GNU_PROPERTY_X86_COMPAT_ISA_1_NEEDED): This. (GNU_PROPERTY_X86_ISA_1_XXX): Renamed to ... (GNU_PROPERTY_X86_COMPAT_ISA_1_XXX): This. (GNU_PROPERTY_X86_UINT32_AND_LO): New. (GNU_PROPERTY_X86_UINT32_AND_HI): Likewise. (GNU_PROPERTY_X86_UINT32_OR_LO): Likewise. (GNU_PROPERTY_X86_UINT32_OR_HI): Likewise. (GNU_PROPERTY_X86_UINT32_OR_AND_LO): Likewise. (GNU_PROPERTY_X86_UINT32_OR_AND_HI): Likewise. (GNU_PROPERTY_X86_ISA_1_CMOV): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE2): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE3): Likewise. (GNU_PROPERTY_X86_ISA_1_SSSE3): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE4_1): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE4_2): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX2): Likewise. (GNU_PROPERTY_X86_ISA_1_FMA): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512F): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512CD): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512ER): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512PF): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512VL): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512DQ): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512BW): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_4FMAPS): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_4VNNIW): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_BITALG): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_IFMA): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_VBMI): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_VBMI2): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_VNNI): Likewise. (GNU_PROPERTY_X86_FEATURE_2_X86): Likewise. (GNU_PROPERTY_X86_FEATURE_2_X87): Likewise. (GNU_PROPERTY_X86_FEATURE_2_MMX): Likewise. (GNU_PROPERTY_X86_FEATURE_2_XMM): Likewise. (GNU_PROPERTY_X86_FEATURE_2_YMM): Likewise. (GNU_PROPERTY_X86_FEATURE_2_ZMM): Likewise. (GNU_PROPERTY_X86_FEATURE_2_FXSR): Likewise. (GNU_PROPERTY_X86_FEATURE_2_XSAVE): Likewise. (GNU_PROPERTY_X86_FEATURE_2_XSAVEOPT): Likewise. (GNU_PROPERTY_X86_FEATURE_2_XSAVEC): Likewise. (GNU_PROPERTY_X86_FEATURE_1_AND): Updated to (GNU_PROPERTY_X86_UINT32_AND_LO + 0). (GNU_PROPERTY_X86_ISA_1_NEEDED): Defined to (GNU_PROPERTY_X86_UINT32_OR_LO + 0). (GNU_PROPERTY_X86_FEATURE_2_NEEDED): New. Defined to (GNU_PROPERTY_X86_UINT32_OR_LO + 1). (GNU_PROPERTY_X86_ISA_1_USED): Defined to (GNU_PROPERTY_X86_UINT32_OR_AND_LO + 0). (GNU_PROPERTY_X86_FEATURE_2_USED): New. Defined to (GNU_PROPERTY_X86_UINT32_OR_AND_LO + 1). ld/ * testsuite/ld-i386/i386.exp: Run pr23372c, pr23372d, pr23486c and pr23486d. * testsuite/ld-i386/pr23372a.s: Update comments. * testsuite/ld-i386/pr23372b.s: Likewise. * testsuite/ld-i386/pr23372c.s: Likewise. * testsuite/ld-x86-64/pr23372a.s: Likewise. * testsuite/ld-x86-64/pr23372b.s: Likewise. * testsuite/ld-x86-64/pr23372c.s: Likewise. * testsuite/ld-x86-64/pr23486a.s: Likewise. * testsuite/ld-x86-64/pr23486b.s: Likewise. * testsuite/ld-i386/pr23372c.d: New file. * testsuite/ld-i386/pr23372d.d: Likewise. * testsuite/ld-i386/pr23486c.d: Likewise. * testsuite/ld-i386/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23372d-x32.d: Likewise. * testsuite/ld-x86-64/pr23372d.d: Likewise. * testsuite/ld-x86-64/pr23372d.s: Likewise. * testsuite/ld-x86-64/pr23372e.s: Likewise. * testsuite/ld-x86-64/pr23372f.s: Likewise. * testsuite/ld-x86-64/pr23486c-x32.d: Likewise. * testsuite/ld-x86-64/pr23486c.d: Likewise. * testsuite/ld-x86-64/pr23486c.s: Likewise. * testsuite/ld-x86-64/pr23486d-x32.d: Likewise. * testsuite/ld-x86-64/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr23486d.s: Likewise. * testsuite/ld-i386/property-3.r: Updated. * testsuite/ld-i386/property-4.r: Likewise. * testsuite/ld-i386/property-5.r: Likewise. * testsuite/ld-i386/property-x86-3.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3b.d: Likewise. * testsuite/ld-x86-64/property-3.r: Likewise. * testsuite/ld-x86-64/property-4.r: Likewise. * testsuite/ld-x86-64/property-5.r: Likewise. * testsuite/ld-x86-64/property-x86-3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-3.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise. * testsuite/ld-i386/property-x86-1.S: Updated to the current GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED values. * testsuite/ld-i386/property-x86-2.S: Likewise. * testsuite/ld-i386/property-x86-3.s: Likewise. * testsuite/ld-x86-64/property-x86-1.S: Likewise. * testsuite/ld-x86-64/property-x86-2.S: Likewise. * testsuite/ld-x86-64/property-x86-3.s: Likewise. * ld/testsuite/ld-x86-64/x86-64.exp: Run pr23372c, pr23372c-x32, pr23372d, pr23372d-x32, pr23486c, pr23486c-x32, pr23486d and pr23486d-x32.
2018-08-24x86: Add GNU_PROPERTY_X86_UINT32_VALIDH.J. Lu1-0/+3
The older linker treats .note.gnu.property section as a generic note and just concatenates all .note.gnu.property sections from the input to the output. On CET-enabled OS, the output of the older linker is marked as CET enabled, but in fact, it is not CET enabled and it crashes on CET-enabled machines. This patch defines GNU_PROPERTY_X86_UINT32_VALID. Linker is updated to set the GNU_PROPERTY_X86_UINT32_VALID bit in GNU property note for non-relocatable output to differentiate outputs from the older linker. bfd/ * elfxx-x86.c (_bfd_x86_elf_parse_gnu_properties): Mask out the GNU_PROPERTY_X86_UINT32_VALID bit. (_bfd_x86_elf_link_fixup_gnu_properties): Set the GNU_PROPERTY_X86_UINT32_VALID bit for non-relocatable output. binutils/ * readelf.c (print_gnu_property_note): Check the GNU_PROPERTY_X86_UINT32_VALID bit for invalid GNU property note. include/ * elf/common.h (GNU_PROPERTY_X86_UINT32_VALID): New.
2018-08-21S12Z: Rename reloc R_S12Z_UKNWN_3 to R_S12Z_EXT18 and implement according to ↵John Darrington1-1/+1
recently inferred information about this reloc. * bfd/elf32-s12z.c: (opru18_reloc): New function. * bfd/elf32-s12z.c: (elf_s12z_howto_table): Adjust Howto according to new knowledge. * include/elf/s12z.h: Rename R_S12Z_UKNWN_3 to R_S12Z_EXT18.
2018-08-09arm - Add some comments about the versions of ARM ELF that define various ↵Richard Earnshaw1-3/+5
e_flags values This patch adds a few comments to include/elf/arm.h to clarify which versions of the ARM ELF specification defined which headers. Given that the EABI is pretty ubiquitous these days, I've marked anything not based on that as deprecated. There are no plans to remove any deprecated definitions at this time, but any new development shouldn't be building upon support for deprecated definitions remaining in the long term. * elf/arm.h: Updated comments for e_flags definitions.
2018-08-06[ARC] Add Tag_ARC_ATR_version.claziss1-1/+2
Add a new tag (Tag_ARC_ATR_version) used to indicate if current attributes are interpreted in GNU way. This attribute is used by Synopsys custom compiler to correctly identify and interpret the object attributes section as generated by GNU tools. gas/ 2017-08-02 Claudiu Zissulescu <claziss@synopsys.com> * config/tc-arc.c (arc_set_public_attributes): Add Tag_ARC_ATR_version. (arc_convert_symbolic_attribute): Likewise. * testsuite/gas/arc/attr-arc600.d: Update test. * testsuite/gas/arc/attr-arc600_mul32x16.d: Likewise. * testsuite/gas/arc/attr-arc600_norm.d: Likewise. * testsuite/gas/arc/attr-arc601.d: Likewise. * testsuite/gas/arc/attr-arc601_mul32x16.d: Likewise. * testsuite/gas/arc/attr-arc601_mul64.d: Likewise. * testsuite/gas/arc/attr-arc601_norm.d: Likewise. * testsuite/gas/arc/attr-arc700.d: Likewise. * testsuite/gas/arc/attr-arcem.d: Likewise. * testsuite/gas/arc/attr-archs.d: Likewise. * testsuite/gas/arc/attr-autodetect-1.d: Likewise. * testsuite/gas/arc/attr-cpu-a601.d: Likewise. * testsuite/gas/arc/attr-cpu-a700.d: Likewise. * testsuite/gas/arc/attr-cpu-em.d: Likewise. * testsuite/gas/arc/attr-cpu-hs.d: Likewise. * testsuite/gas/arc/attr-em.d: Likewise. * testsuite/gas/arc/attr-em4.d: Likewise. * testsuite/gas/arc/attr-em4_dmips.d: Likewise. * testsuite/gas/arc/attr-em4_fpuda.d: Likewise. * testsuite/gas/arc/attr-em4_fpus.d: Likewise. * testsuite/gas/arc/attr-hs.d: Likewise. * testsuite/gas/arc/attr-hs34.d: Likewise. * testsuite/gas/arc/attr-hs38.d: Likewise. * testsuite/gas/arc/attr-hs38_linux.d: Likewise. * testsuite/gas/arc/attr-mul64.d: Likewise. * testsuite/gas/arc/attr-name.d: Likewise. * testsuite/gas/arc/attr-nps400.d: Likewise. * testsuite/gas/arc/attr-override-mcpu.d: Likewise. * testsuite/gas/arc/attr-quarkse_em.d: Likewise. bfd/ 2017-08-02 Claudiu Zissulescu <claziss@synopsys.com> * elf32-arc.c (arc_elf_merge_attributes): Handle Tag_ARC_ATR_version. binutils/ 2017-08-02 Claudiu Zissulescu <claziss@synopsys.com> * readelf.c (display_arc_attribute): Print Tag_ARC_ATR_version. include/ 2017-08-02 Claudiu Zissulescu <claziss@synopsys.com> * elf/arc.h (Tag_ARC_ATR_version): New tag. ld/ 2017-08-02 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/ld-arc/attr-merge-0.d: Update test. * testsuite/ld-arc/attr-merge-1.d: Likewise. * testsuite/ld-arc/attr-merge-2.d: Likewise. * testsuite/ld-arc/attr-merge-3.d: Likewise. * testsuite/ld-arc/attr-merge-5.d: Likewise.
2018-07-30Add support for the C_SKY series of processors.Andrew Jenner2-0/+102
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc. This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about. bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY. (BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise. * Makefile.in: Regenerated. * archures.c (enum bfd_architecture): Add bfd_arch_csky and related bfd_mach defines. (bfd_csky_arch): Declare. (bfd_archures_list): Add C-SKY. * bfd-in.h (elf32_csky_build_stubs): Declare. (elf32_csky_size_stubs): Declare. (elf32_csky_next_input_section: Declare. (elf32_csky_setup_section_lists): Declare. * bfd-in2.h: Regenerated. * config.bfd: Add C-SKY. * configure.ac: Likewise. * configure: Regenerated. * cpu-csky.c: New file. * elf-bfd.h (enum elf_target_id): Add C-SKY. * elf32-csky.c: New file. * libbfd.h: Regenerated. * reloc.c: Add C-SKY relocations. * targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare. (_bfd_target_vector): Add C-SKY target vector entries. binutils* readelf.c: Include elf/csky.h. (guess_is_rela): Handle EM_CSKY. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. include * dis-asm.h (csky_symbol_is_valid): Declare. * opcode/csky.h: New file. opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c. * Makefile.in: Regenerated. * configure.ac: Add C-SKY. * configure: Regenerated. * csky-dis.c: New file. * csky-opc.h: New file. * disassemble.c (ARCH_csky): Define. (disassembler, disassemble_init_for_target): Add case for ARCH_csky. * disassemble.h (print_insn_csky, csky_get_disassembler): Declare. gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY. (TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise. * Makefile.in: Regenerated. * config/tc-csky.c: New file. * config/tc-csky.h: New file. * config/te-csky_abiv1.h: New file. * config/te-csky_abiv1_linux.h: New file. * config/te-csky_abiv2.h: New file. * config/te-csky_abiv2_linux.h: New file. * configure.tgt: Add C-SKY. * doc/Makefile.am (CPU_DOCS): Add entry for C-SKY. * doc/Makefile.in: Regenerated. * doc/all.texi: Set CSKY feature. * doc/as.texi (Overview): Add C-SKY options. (Machine Dependencies): Likewise. * doc/c-csky.texi: New file. * testsuite/gas/csky/*: New test cases. ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations. (ecskyelf.c, ecskyelf_linux.c): New rules. * Makefile.in: Regenerated. * configure.tgt: Add C-SKY. * emulparams/cskyelf.sh: New file. * emulparams/cskyelf_linux.sh: New file. * emultempl/cskyelf.em: New file. * gen-doc.texi: Add C-SKY. * ld.texi: Likewise. (Options specific to C-SKY targets): New section. * testsuite/ld-csky/*: New tests.
generated by cgit v1.1 at 2024-12-15 21:03:20 +0000