aboutsummaryrefslogtreecommitdiff
path: root/include/elf/mips.h
AgeCommit message (Collapse)AuthorFilesLines
2019-08-09Add support for a MIPS specific .MIPS.xhash section.Mihailo Stojanovic1-0/+6
This patch is a reimplementation of [1] which was submitted in 2015 by Neil Schellenberger. Copyright issue was sorted out [2] last year. It proposed a new section (.gnu.xhash) and related dynamic tag (DT_GNU_XHASH). The new section would be virtually identical to the existing .gnu.hash except for the translation table (xlat) which would contain correct MIPS .dynsym indexes corresponding to the hashvals in chains. This is because MIPS ABI imposes a different ordering on the dynsyms than the one expected by the .gnu.hash section. Another addition would be a leading word (ngnusyms) which would contain the number of entries in the translation table. In this patch, the new section name and dynamic tag are changed to reflect the fact that the section should be treated as MIPS-specific (.MIPS.xhash and DT_MIPS_XHASH). This patch addresses the alignment issue as reported in [3], which is caused by the leading word added to the .MIPS.xhash section. Leading word is removed in this patch, and the number of entries in the translation table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is addressed by the corresponding glibc patch). Suggestions on coding style in [4] were taken into account. Existing GNU hash testcase was covered, and another one was added in the MIPS part of the testsuite. The other major change is reserving MIPS ABI version 5 for .MIPS.xhash, marking the need of support for .MIPS.xhash in the dynamic linker (again, addressed in the corresponding glibc patch). This is something which I am not sure of, especially after reading [5]. I am confused on whether this ABI version is reserved for IFUNC, or it can be used for this purpose. Already mentioned glibc patch is submitted at: https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html [1] https://sourceware.org/ml/binutils/2015-10/msg00057.html [2] https://sourceware.org/ml/binutils/2018-03/msg00025.html [3] https://sourceware.org/ml/binutils/2016-01/msg00006.html [4] https://sourceware.org/ml/binutils/2016-02/msg00097.html [5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section. * emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section. * emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section. * emultempl/mipself.em: Remove mips_after_parse function. * testsuite/ld-elf/hash.d: Update comment. * testsuite/ld-mips-elf/hash1.d: New test. * testsuite/ld-mips-elf/hash1.s: Ditto. * testsuite/ld-mips-elf/hash1a.d: Remove. * testsuite/ld-mips-elf/hash1b.d: Ditto. * testsuite/ld-mips-elf/hash1c.d: Ditto * testsuite/ld-mips-elf/hash2.d: New test. * testsuite/ld-mips-elf/mips-elf.exp: New tests. * testsuite/ld-mips-elf/start.s: New test. bfd * elf-bfd.h (struct elf_backend_data): New members. * elflink.c (_bfd_elf_link_create_dynamic_sections): Create .gnu.hash section if necessary. (struct collect_gnu_hash_codes): New member. (elf_gnu_hash_process_symidx): New function name. (elf_renumber_gnu_hash_syms): Ignore local and undefined symbols. Record xlat location for every symbol which should have a .MIPS.xhash entry. (bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to dynamic section if necessary. (GNU_HASH_SECTION_NAME): New define. (bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section. Update the section size info. * elfxx-mips.c (struct mips_elf_hash_sort_data): New members. (struct mips_elf_link_hash_entry): New member. (mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation table location. (mips_elf_sort_hash_table): Initialize the pointer to the .MIPS.xhash section. (mips_elf_sort_hash_table_f): Populate the .MIPS.xhash translation table entry with the symbol dynindx. (_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH. (_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section info. (_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash section. (_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to dynamic section. (_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH. (_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section sh_link info. (_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag. (MIPS_LIBC_ABI_XHASH): New ABI version enum value. (_bfd_mips_post_process_headers): Mark the ABI version as MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section, but not a .hash section. (_bfd_mips_elf_record_xhash_symbol): New function. Record a position in the translation table, associated with the hash entry. * elfxx-mips.h (literal_reloc_p): Define elf_backend_record_xhash_symbol backend hook. * elfxx-target.h: Initialize elf_backend_record_xhash_symbol backend hook. include * elf/mips.h (SHT_GNU_XHASH): New define. (DT_GNU_XHASH): New define. binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type. (get_mips_section_type_name): Return MI{S_XHASH name string. (dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic info. (process_symbol_table): Initialize the .MIPS.xhash section pointer. Adjust the readelf output to support the new section. (process_object): Set the .MIPS.xhash dynamic info to zero.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-08-29[MIPS] Add Loongson 2K1000 proccessor support.Chenghua Xu1-0/+1
bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs264e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS264E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs264e to bfd_mach_mips_gs464e extension. binutils/ * NEWS: Mention Loongson 2K1000 proccessor support. * readelf.c (get_machine_flags): Handle gs264e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS264E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS264E. (mips_cpu_info_table): Add gs264e descriptors. * doc/as.texi (march table): Add gs264e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS264E. * opcode/mips.h (CPU_XXX): New CPU_GS264E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs264e and gs464e. opcodes/ * mips-dis.c (mips_arch_choices): Add gs264e descriptors.
2018-08-29[MIPS] Add Loongson 3A2000/3A3000 proccessor support.Chenghua Xu1-0/+1
bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs464e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS464E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs464e to bfd_mach_mips_gs464 extension. binutils/ * NEWS: Mention Loongson 3A2000/3A3000 proccessor support. * readelf.c (get_machine_flags): Handle gs464e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS464E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS464E. (mips_cpu_info_table): Add gs464e descriptors. * doc/as.texi (march table): Add gs464e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS464E. * opcode/mips.h (CPU_XXX): New CPU_GS464E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs464e and gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464e descriptors.
2018-08-29[MIPS] Add Loongson 3A1000 proccessor support.Chenghua Xu1-2/+1
bfd/ * archures.c (bfd_architecture): Rename bfd_mach_mips_loongson_3a to bfd_mach_mips_gs464. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Likewise. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Likewise. (bfd_mips_isa_ext_mach): Likewise. (bfd_mips_isa_ext): Likewise. (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. binutils/ * NEWS: Mention Loongson 3A1000 proccessor support. * readelf.c (get_machine_flags): Rename loongson-3a to gs464. (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. elfcpp/ * mips.c (EF_MIPS_MACH): Rename E_MIPS_MACH_LS3A to E_MIPS_MACH_GS464. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Rename CPU_LOONGSON_3A to CPU_GS464. (mips_cpu_info_table): Add gs464 descriptors, Keep loongson3a as an alias of gs464 for compatibility. * doc/as.texi (march table): Rename loongson3a to gs464. * testsuite/gas/mips/loongson-3a-mmi.d: Set "ISA Extension" flag to None. gold/ * mips.cc (Mips_mach, add_machine_extensions, elf_mips_mach): Rename loongson3a to gs464. (mips_isa_ext_mach, mips_isa_ext): Delete loongson3a. (infer_abiflags): Use ases instead of isa_ext for infer ABI flags. (elf_mips_mach_name): Rename loongson3a to gs464. include/ * elf/mips.h (E_MIPS_MACH_XXX): Rename E_MIPS_MACH_LS3A to E_MIPS_MACH_GS464. (AFL_EXT_XXX): Delete AFL_EXT_LOONGSON_3A. * opcode/mips.h (INSN_XXX): Delete INSN_LOONGSON_3A. (CPU_XXX): Rename CPU_LOONGSON_3A to CPU_GS464. * opcode/mips.h (mips_isa_table): Delete CPU_LOONGSON_3A case. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Rename loongson3a to gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464 descriptors, Keep loongson3a as an alias of gs464 for compatibility. * mips-opc.c (mips_opcodes): Change Comments.
2018-08-29[MIPS/GAS] Add Loongson EXT2 Instructions support.Chenghua Xu1-1/+2
bfd/ * elfxx-mips.c (print_mips_ases): Add Loongson EXT2 extension. binutils/ * readelf.c (print_mips_ases): Add Loongson EXT2 extension. gas/ * NEWS: Mention Loongson EXTensions R2 (EXT2) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_EXT2 and OPTION_NO_LOONGSON_EXT2. (md_longopts): Likewise. (mips_ases): Define availability for EXT. (mips_convert_ase_flags): Map ASE_LOONGSON_EXT2 to AFL_ASE_LOONGSON_EXT2. (md_show_usage): Add help for -mloongson-ext2 and -mno-loongson-ext2. * doc/as.texi: Document -mloongson-ext2, -mno-loongson-ext2. * doc/c-mips.texi: Document -mloongson-ext2, -mno-loongson-ext2, .set loongson-ext2 and .set noloongson-ext2. * testsuite/gas/mips/loongson-ext2.d: New test. * testsuite/gas/mips/loongson-ext2.s: New test. * testsuite/gas/mips/mips.exp: Run loongson-ext2 test. include/ * elf/mips.h (AFL_ASE_LOONGSON_EXT2): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT2. * opcode/mips.h (ASE_LOONGSON_EXT2): New macro. opcodes/ * mips-dis.c (parse_mips_ase_option): Handle -M loongson-ext option. (print_mips_disassembler_options): Document -M loongson-ext. * mips-opc.c (LEXT2): New macro. (mips_opcodes): Add cto, ctz, dcto, dctz instructions.
2018-08-29[MIPS/GAS] Split Loongson EXT Instructions from loongson3a.Chenghua Xu1-1/+2
bfd/ * elfxx-mips.c (infer_mips_abiflags): Use ases instead of isa_ext for infer ABI flags. (print_mips_ases): Add Loongson EXT extension. binutils/ * readelf.c (print_mips_ases): Add Loongson EXT extension. elfcpp/ * mips.h (AFL_ASE_LOONGSON_EXT): New enum. gas/ * NEWS: Mention Loongson EXTensions (EXT) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_EXT and OPTION_NO_LOONGSON_EXT. (md_longopts): Likewise. (mips_ases): Define availability for EXT. (mips_convert_ase_flags): Map ASE_LOONGSON_EXT to AFL_ASE_LOONGSON_EXT. (mips_cpu_info_table): Add ASE_LOONGSON_EXT for loongson3a. (md_show_usage): Add help for -mloongson-ext and -mno-loongson-ext. * doc/as.texi: Document -mloongson-ext, -mno-loongson-ext. * doc/c-mips.texi: Document -mloongson-ext, -mno-loongson-ext, .set loongson-ext and .set noloongson-ext. * testsuite/gas/mips/loongson-mmi.d: Add ASE flag. include/ * elf/mips.h (AFL_ASE_LOONGSON_EXT): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT. * opcode/mips.h (ASE_LOONGSON_EXT): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add EXT to loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-ext option. (print_mips_disassembler_options): Document -M loongson-ext. * mips-opc.c (IL3A): Delete. * mips-opc.c (LEXT): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LEXT for EXT instructions.
2018-08-29[MIPS/GAS] Split Loongson CAM Instructions from loongson3aChenghua Xu1-1/+2
bfd/ * elfxx-mips.c (print_mips_ases): Add CAM extension. binutils/ * readelf.c (print_mips_ases): Add CAM extension. gas/ * NEWS: Mention Loongson Content Address Memory (CAM) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_CAM and OPTION_NO_LOONGSON_CAM. (md_longopts): Likewise. (mips_ases): Define availability for CAM. (mips_convert_ase_flags): Map ASE_LOONGSON_CAM to AFL_ASE_LOONGSON_CAM. (mips_cpu_info_table): Add ASE_LOONGSON_CAM for loongson3a. (md_show_usage): Add help for -mloongson-cam and -mno-loongson-cam. * doc/as.texi: Document -mloongson-cam, -mno-loongson-cam. * doc/c-mips.texi: Document -mloongson-cam, -mno-loongson-cam, .set loongson-cam and .set noloongson-cam. * testsuite/gas/mips/loongson-3a-2.d: Move cam test to ... * testsuite/gas/mips/loongson-cam.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-3a-2.s: Move cam test to ... * testsuite/gas/mips/loongson-cam.s: Here. * testsuite/gas/mips/loongson-3a-mmi.d: Add ASE flag. * testsuite/gas/mips/mips.exp: Run loongson-cam test. include/ * elf/mips.h (AFL_ASE_LOONGSON_CAM): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_CAM. * opcode/mips.h (ASE_LOONGSON_CAM): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add CAM to loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-cam option. (print_mips_disassembler_options): Document -M loongson-cam. * mips-opc.c (LCAM): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LCAM for CAM instructions.
2018-07-27MIPS/GAS: Correct the AFL_ASE_MASK macroChenghua Xu1-1/+1
Fix an issue with commit 8095d2f70e1a ("MIPS/GAS: Split Loongson MMI Instructions from loongson2f/3a"), AFL_ASE_MASK should be 0x0006ffff instead of 0x0004ffff. 2018-07-27 Chenghua Xu <paul.hua.gm@gmail.com> Maciej W. Rozycki <macro@linux-mips.org> include/ * elf/mips.h (AFL_ASE_MASK): Correct typo.
2018-07-20MIPS/GAS: Split Loongson MMI Instructions from loongson2f/3aChenghua Xu1-1/+2
The MMI instruction set has been implemented in many Loongson processors. There is a lot of software optimized for MMI. This patch splits MMI from loongson2f/3a, and adds GAS and disassembler options for MMI instructions. 2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com> Maciej W. Rozycki <macro@mips.com> bfd/ * elfxx-mips.c (print_mips_ases): Add MMI extension. binutils/ * readelf.c (print_mips_ases): Add MMI extension. gas/ * NEWS: Mention MultiMedia extensions Instructions (MMI) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and OPTION_NO_LOONGSON_MMI. (md_longopts): Likewise. (mips_ases): Define availability for MMI. (mips_convert_ase_flags): Map ASE_LOONGSON_MMI to AFL_ASE_LOONGSON_MMI. (mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a. (md_show_usage): Add help for -mloongson-mmi and -mno-loongson-mmi. * doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi. * doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi, .set loongson-mmi and .set noloongson-mmi. * testsuite/gas/mips/loongson-2f.d: Move mmi test to ... * testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-2f.s: Move mmi test to ... * testsuite/gas/mips/loongson-2f-mmi.s: Here. * testsuite/gas/mips/loongson-3a.d: Move mmi test to ... * testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-3a.s: Move mmi test to ... * testsuite/gas/mips/loongson-3a-mmi.s: Here. * testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and loongson-3a-mmi tests. include/ * elf/mips.h (AFL_ASE_MMI): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI. * opcode/mips.h (ASE_LOONGSON_MMI): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add MMI to loongson2f and loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-mmi option. (print_mips_disassembler_options): Document -M loongson-mmi. * mips-opc.c (LMMI): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI instructions.
2018-06-14MIPS: Add Global INValidate ASE supportFaraz Shahbazker1-1/+3
Add support for the Global INValidate Application Specific Extension for Release 6 of the MIPS Architecture. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 187-191 bfd/ * elfxx-mips.c (print_mips_ases): Add GINV extension. binutils/ * readelf.c (print_mips_ases): Add GINV extension. gas/ * NEWS: Mention MIPS Global INValidate ASE support. * config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV. (md_longopts): Likewise. (mips_ases): Define availability for GINV. (mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV. (md_show_usage): Add help for -mginv and -mno-ginv. * doc/as.texinfo: Document -mginv, -mno-ginv. * doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and .set noginv. * testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV ASE. * testsuite/gas/mips/ase-errors-2.s: Likewise. * testsuite/gas/mips/ase-errors-1.l: Likewise. * testsuite/gas/mips/ase-errors-2.l: Likewise. * testsuite/gas/mips/ginv.d: New test. * testsuite/gas/mips/ginv-err.d: New test. * testsuite/gas/mips/ginv-err.l: New test stderr output. * testsuite/gas/mips/ginv.s: New test source. * testsuite/gas/mips/ginv-err.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. include/ * elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros. (AFL_ASE_MASK): Update to include AFL_ASE_GINV. * opcode/mips.h: Document "+\" operand format. (ASE_GINV): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and mips64r6 descriptors. (parse_mips_ase_option): Handle -Mginv option. (print_mips_disassembler_options): Document -Mginv. * mips-opc.c (decode_mips_operand) <+\>: New operand format. (GINV): New macro. (mips_opcodes): Define ginvi and ginvt.
2018-06-13MIPS: Add CRC ASE supportScott Egerton1-1/+2
Add support for the CRC Application Specific Extension for Release 6 of the MIPS Architecture. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 143-148 [2] "MIPS Architecture for Programmers Volume II-A: The MIPS64 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 165-170 ChangeLog: bfd/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * elfxx-mips.c (print_mips_ases): Add CRC. binutils/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * readelf.c (print_mips_ases): Add CRC. gas/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> Maciej W. Rozycki <macro@mips.com> * config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC. (md_longopts): Likewise. (md_show_usage): Add help for -mcrc and -mno-crc. (mips_ases): Define availability for CRC and CRC64. (mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC. * doc/as.texinfo: Document -mcrc, -mno-crc. * doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and .set no-crc. * testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC ASE. * testsuite/gas/mips/ase-errors-2.l: Likewise. * testsuite/gas/mips/ase-errors-1.s: Likewise. * testsuite/gas/mips/ase-errors-2.s: Likewise. * testsuite/gas/mips/crc.d: New test. * testsuite/gas/mips/crc64.d: New test. * testsuite/gas/mips/crc-err.d: New test. * testsuite/gas/mips/crc64-err.d: New test. * testsuite/gas/mips/crc-err.l: New test stderr output. * testsuite/gas/mips/crc64-err.l: New test stderr output. * testsuite/gas/mips/crc.s: New test source. * testsuite/gas/mips/crc64.s: New test source. * testsuite/gas/mips/crc-err.s: New test source. * testsuite/gas/mips/crc64-err.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. include/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * elf/mips.h (AFL_ASE_CRC): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_CRC. * opcode/mips.h (ASE_CRC): New macro. * opcode/mips.h (ASE_CRC64): Likewise. opcodes/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs. * mips-opc.c (CRC, CRC64): New macros. (mips_builtin_opcodes): Define crc32b, crc32h, crc32w, crc32cb, crc32ch and crc32cw for CRC. Define crc32d and crc32cd for CRC64.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-06-28MIPS: Add Imagination interAptiv MR2 MIPS32r3 processor supportMaciej W. Rozycki1-0/+2
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with the MIPS16e2 ASE as per documentation, including in particular: 1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW MIPS16e2 instructions[1], for assembly and disassembly, 2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE regular MIPS instructions[2], for assembly and disassembly, 3. ELF binary file annotation for the interAptiv MR2 MIPS architecture extension. 4. Support for interAptiv MR2 architecture selection for assembly, in the form of the `-march=interaptiv-mr2' command-line option and its corresponding `arch=interaptiv-mr2' setting for the `.set' and `.module' pseudo-ops. 5. Support for interAptiv MR2 architecture selection for disassembly, in the form of the `mips:interaptiv-mr2' target architecture, for use e.g. with the `-m' command-line option for `objdump'. Parts of this change by Matthew Fortune and Andrew Bennett. References: [1] "MIPS32 interAptiv Multiprocessing System Software User's Manual", Imagination Technologies Ltd., Document Number: MD00904, Revision 02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific Instructions", pp. 878-883 [2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917 include/ * elf/mips.h (E_MIPS_MACH_IAMR2): New macro. (AFL_EXT_INTERAPTIV_MR2): Likewise. * opcode/mips.h: Document new operand codes defined. (INSN_INTERAPTIV_MR2): New macro. (INSN_CHIP_MASK): Adjust accordingly. (CPU_INTERAPTIV_MR2): New macro. (cpu_is_member) <CPU_INTERAPTIV_MR2>: New case. (MIPS16_ALL_ARGS): Rename to... (MIPS_SVRS_ALL_ARGS): ... this. (MIPS16_ALL_STATICS): Rename to... (MIPS_SVRS_ALL_STATICS): ... this. bfd/ * archures.c (bfd_mach_mips_interaptiv_mr2): New macro. * cpu-mips.c (I_interaptiv_mr2): New enum value. (arch_info_struct): Add "mips:interaptiv-mr2" entry. * elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New case. (mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise. (bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise. (print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise. (mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and `bfd_mach_mips_interaptiv_mr2' entries. * bfd-in2.h: Regenerate. opcodes/ * mips-formats.h (INT_BIAS): New macro. (INT_ADJ): Redefine in INT_BIAS terms. * mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry. (mips_print_save_restore): New function. (print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment. (validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort' call. (print_insn_args): Handle OP_SAVE_RESTORE_LIST. (print_mips16_insn_arg): Call `mips_print_save_restore' for OP_SAVE_RESTORE_LIST handling, factored out from here. * mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case. (RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros. (mips_builtin_opcodes): Add "restore" and "save" entries. * mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases. (IAMR2): New macro. (mips16_opcodes): Add "copyw" and "ucopyw" entries. binutils/ * readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case. (print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise. * NEWS: Mention Imagination interAptiv MR2 processor support. gas/ * config/tc-mips.c (validate_mips_insn): Handle OP_SAVE_RESTORE_LIST specially. (mips_encode_save_restore, mips16_encode_save_restore): New functions. (match_save_restore_list_operand): Factor out SAVE/RESTORE operand insertion into the instruction word or halfword to these new functions. (mips_cpu_info_table): Add "interaptiv-mr2" entry. * doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the `-march=' argument list.
2017-05-15MIPS16e2: Add MIPS16e2 ASE supportMaciej W. Rozycki1-1/+2
Add MIPS16e2 ASE support as per the architecture specification[1], including in particular: 1. A new ELF ASE flag to mark MIPS16e2 binaries. 2. MIPS16e2 instruction assembly support, including a relaxation update to use LUI rather than an LI/SLL instruction pair for loading the high part of 32-bit addresses. 3. MIPS16e2 instruction disassembly support, including updated rules for extended forms of instructions that are now subdecoded and therefore do not alias to the original MIPS16 ISA revision instructions even for encodings that are not valid in the MIPS16e2 instruction set. Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and `.module' pseudo-ops. Control the availability of the MT ASE subset of the MIPS16e2 instruction set with a combination of these controls and the preexisting MT ASE controls. Parts of this change by Matthew Fortune and Andrew Bennett. References: [1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific Extension Technical Reference Manual", Imagination Technologies Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016 include/ * elf/mips.h (AFL_ASE_MIPS16E2): New macro. (AFL_ASE_MASK): Adjust accordingly. * opcode/mips.h: Document new operand codes defined. (mips_operand_type): Add OP_REG28 enum value. (INSN2_SHORT_ONLY): Update description. (ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros. bfd/ * elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry. (mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag. (print_insn_arg) <OP_REG28>: Add handler. (validate_insn_args) <OP_REG28>: Handle. (print_mips16_insn_arg): Handle MIPS16 instructions that require 32-bit encoding and 9-bit immediates. (print_insn_mips16): Handle MIPS16 instructions that require 32-bit encoding and MFC0/MTC0 operand decoding. * mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'> <'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers. (RD_C0, WR_C0, E2, E2MT): New macros. (mips16_opcodes): Add entries for MIPS16e2 instructions: GP-relative "addiu" and its "addu" spelling, "andi", "cache", "di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh", "lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0", "movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause", "pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw" instructions, "swl", "swr", "sync" and its "sync_acquire", "sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases, "xori", "dmt", "dvpe", "emt" and "evpe". Add split regular/extended entries for original MIPS16 ISA revision instructions whose extended forms are subdecoded in the MIPS16e2 ISA revision: "li", "sll" and "srl". binutils/ * readelf.c (print_mips_ases): Handle MIPS16e2 ASE. * NEWS: Mention MIPS16e2 ASE support. gas/ * config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag. (RELAX_MIPS16_E2): New macro. (RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO) (RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT) (RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT) (RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED) (RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED) (RELAX_MIPS16_MARK_ALWAYS_EXTENDED) (RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO) (RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits. (mips16_immed_extend): New prototype. (options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum values. (md_longopts): Add "mmips16e2" and "mno-mips16e2" options. (mips_ases): Add "mips16e2" entry. (mips_set_ase): Handle MIPS16e2 ASE. (insn_insert_operand): Explicitly handle immediates with MIPS16 instructions that require 32-bit encoding. (is_opcode_valid_16): Pass enabled ASE bitmask on to `opcode_is_member'. (validate_mips_insn): Explicitly handle immediates with MIPS16 instructions that require 32-bit encoding. (operand_reg_mask) <OP_REG28>: Add handler. (match_reg28_operand): New function. (match_operand) <OP_REG28>: Add handler. (append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE. (match_mips16_insn): Handle MIPS16 instructions that require 32-bit encoding and `V' and `u' operand codes. (mips16_ip): Allow any characters except from `.' in opcodes. (mips16_immed_extend): Handle 9-bit immediates. Do not shuffle immediates whose width is not one of these listed. (md_estimate_size_before_relax): Handle MIPS16e2 relaxation. (mips_relax_frag): Likewise. (md_convert_frag): Likewise. (mips_convert_ase_flags): Handle MIPS16e2 ASE. * doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and `-mno-mips16e2' options. (-mmips16e2, -mno-mips16e2): New options. * doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and `-mno-mips16e2' options. (MIPS ASE Instruction Generation Overrides): Add `.set mips16e2' and `.set nomips16e2'.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-12-14MIPS/opcodes: Also set disassembler's ASE flags from ELF structuresMaciej W. Rozycki1-1/+1
Respect any ASE flags recorded in ELF file structures for the purpose of selecting instructions to be disassembled, preventing code from being hex-dumped even though having been clearly indicated as valid at the assembly time. Use date from the MIPS ABI flags structure if present, and otherwise there may be an MDMX ASE flag set in the ELF file header. For backwards compatibility only set extra flags and do not clear any, preserving all previously set by the architecture selected to be disassembled for. include/ * elf/mips.h (Elf_Internal_ABIFlags_v0): Also declare struct typedef as `elf_internal_abiflags_v0'. bfd/ * bfd-in.h (elf_internal_abiflags_v0): New struct declaration. (bfd_mips_elf_get_abiflags): New prototype. * elfxx-mips.c (bfd_mips_elf_get_abiflags): New function. * bfd-in2.h: Regenerate. opcodes/ * mips-dis.c (mips_convert_abiflags_ases): New function. (set_default_mips_dis_options): Also infer ASE flags from ELF file structures. binutils/ * testsuite/binutils-all/mips/mips-ase-1.d: New test. * testsuite/binutils-all/mips/mips-ase-2.d: New test. * testsuite/binutils-all/mips/mips-ase-3.d: New test. * testsuite/binutils-all/mips/mips-ase-1.s: New test source. * testsuite/binutils-all/mips/mips-ase-2.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-06-28MIPS16: Add R_MIPS16_PC16_S1 branch relocation supportMaciej W. Rozycki1-1/+2
For R_MIPS16_PC16_S1 the calculation is `(sign_extend(A) + S - P) >> 1' and the usual MIPS16 bit shuffling applies to relocated field handling, as per the encoding of the branch target in the extended form of the MIPS16 B, BEQZ, BNEZ, BTEQZ and BTNEZ instructions. include/ * elf/mips.h (R_MIPS16_PC16_S1): New relocation. bfd/ * elf32-mips.c (elf_mips16_howto_table_rel): Add R_MIPS16_PC16_S1. (mips16_reloc_map): Likewise. * elf64-mips.c (mips16_elf64_howto_table_rel): Likewise. (mips16_elf64_howto_table_rela): Likewise. (mips16_reloc_map): Likewise. * elfn32-mips.c (elf_mips16_howto_table_rel): Likewise. (elf_mips16_howto_table_rela): Likewise. (mips16_reloc_map): Likewise. * elfxx-mips.c (mips16_branch_reloc_p): New function. (mips16_reloc_p): Handle R_MIPS16_PC16_S1. (b_reloc_p): Likewise. (mips_elf_calculate_relocation): Likewise. (_bfd_mips_elf_check_relocs): Likewise. * reloc.c (BFD_RELOC_MIPS16_16_PCREL_S1): New relocation. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-mips.c (mips16_reloc_p): Handle BFD_RELOC_MIPS16_16_PCREL_S1. (b_reloc_p): Likewise. (limited_pcrel_reloc_p): Likewise. (md_pcrel_from): Likewise. (md_apply_fix): Likewise. (tc_gen_reloc): Likewise. (md_convert_frag): Likewise. (mips_fix_adjustable): Update comment. * testsuite/gas/mips/mips16-branch-reloc-2.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-reloc-3.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-addend-2.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-addend-3.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-absolute.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-reloc-2.l: Remove file. * testsuite/gas/mips/mips16-branch-reloc-3.l: Remove file. * testsuite/gas/mips/mips16-branch-addend-2.l: Remove file. * testsuite/gas/mips/mips16-branch-addend-3.l: Remove file. * testsuite/gas/mips/mips16-branch-absolute.l: Remove file. * testsuite/gas/mips/mips16-branch-addend-2.s: Add padding. * testsuite/gas/mips/branch-weak.s: Adjust alignment, avoid implicit instruction padding, avoid MIPS16 JR->JRC conversion. * testsuite/gas/mips/branch-weak-6.d: New test. * testsuite/gas/mips/branch-weak-7.d: New test. * testsuite/gas/mips/mips.exp: Run the new tests. ld/ * testsuite/ld-mips-elf/mips16-branch-2.d: New test. * testsuite/ld-mips-elf/mips16-branch-3.d: New test. * testsuite/ld-mips-elf/mips16-branch-addend-2.d: New test. * testsuite/ld-mips-elf/mips16-branch-addend-3.d: New test. * testsuite/ld-mips-elf/mips16-branch.s: New test source. * testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
2016-06-01add more extern CTrevor Saunders1-0/+8
opcodes/ChangeLog: 2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * nds32-asm.h: Add extern "C". * sh-opc.h: Likewise. bfd/ChangeLog: 2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * elf32-hppa.h: Add extern "C". * elf32-nds32.h: Likewise. * elf32-tic6x.h: Likewise. include/ChangeLog: 2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * elf/mips.h: Likewise. * elf/sh.h: Likewise. * opcode/d10v.h: Likewise. * opcode/d30v.h: Likewise. * opcode/ia64.h: Likewise. * opcode/mips.h: Likewise. * opcode/ppc.h: Likewise. * opcode/sparc.h: Likewise. * opcode/tic6x.h: Likewise. * opcode/v850.h: Likewise.
2016-05-11Add MIPS32 DSPr3 support.Matthew Fortune1-1/+2
bfd/ * elfxx-mips.c (print_mips_ases): Add DSPR3. binutils/ * readelf.c (print_mips_ases): Add DSPR3. gas/ * config/tc-mips.c (options): Add OPTION_DSPR3 and OPTION_NO_DSPR3. (md_longopts): Likewise. (md_show_usage): Add help for -mdspr3 and -mno-dspr3. (mips_ases): Define availability for DSPr3. (mips_ase_groups): Add ASE_DSPR3 to the DSP group. (mips_convert_ase_flags): Map ASE_DSPR3 to AFL_ASE_DSPR3. * doc/as.texinfo: Document -mdspr3, -mno-dspr3. Fix -mdspr2 formatting. * doc/c-mips.texi: Document -mdspr3, -mno-dspr3, .set dspr3 and .set nodspr3. Fix -mdspr2 formatting. * testsuite/gas/mips/mips32-dspr3.d: New file. * testsuite/gas/mips/mips32-dspr3.s: Likewise. * testsuite/gas/mips/mips.exp: Run mips32-dspr3 test. include/ * elf/mips.h (AFL_ASE_DSPR3): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_DSPR3. * opcode/mips.h (ASE_DSPR3): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_DSPR3 to mips32r6 and mips64r6. * mips-opc.c (D34): New macro. (mips_builtin_opcodes): Define bposge32c for DSPr3.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-07-092015-07-09 Catherine Moore <clm@codesourcery.com>Catherine Moore1-0/+4
include/ * elf/mips/mips.h (Val_GNU_MIPS_ABI_FP_NAN2008): New. gas/ * config/tc-mips.c (check_fpabi): Handle VAL_GNU_MIPS_ABI_FP_NAN2008. binutils/ * readelf.c (print_mips_fp_abi_value): Handle Val_GNU_MIPS_ABI_FP_NAN2008. ld/testsuite/ * ld-mips-elf/attr-gnu-4-08.d: Update expected output. * ld-mips-elf/attr-gnu-4-09.d: New. * ld-mips-elf/attr-gnu-4-19.d: New. * ld-mips-elf/attr-gnu-4-29.d: New. * ld-mips-elf/attr-gnu-4-39.d: New. * ld-mips-elf/attr-gnu-4-49.d: New. * ld-mips-elf/attr-gnu-4-59.d: New. * ld-mips-elf/attr-gnu-4-69.d: New. * ld-mips-elf/attr-gnu-4-79.d: New. * ld-mips-elf/attr-gnu-4-89.d: New. * ld-mips-elf/attr-gnu-4-9.s: New. * ld-mips-elf/mips-elf.exp: Run new tests.
2015-06-26Add support for DT_MIPS_RLD_MAP_REL.Matthew Fortune1-0/+3
This tag makes it possible to access the debug map when debugging position independent executables. bfd/ * elfxx-mips.c (_bfd_mips_elf_create_dynamic_sections): Use executable instead of !shared to indicate an application vs shared library. (_bfd_mips_elf_size_dynamic_sections): Likewise. (_bfd_mips_elf_finish_dynamic_sections): Handle DT_MIPS_RLD_MAP_REL. (_bfd_mips_elf_get_target_dtag): Likewise. binutils/ * readelf.c (get_mips_dynamic_type): Handle DT_MIPS_RLD_MAP_REL. include/ * elf/mips.h (DT_MIPS_RLD_MAP_REL): New macro. ld/testsuite/ * ld-mips-elf/pic-and-nonpic-3b.ad: Adjust for extra dynamic tag. * ld-mips-elf/pic-and-nonpic-4b.ad: Likewise. * ld-mips-elf/pic-and-nonpic-5b.ad: Likewise. * ld-mips-elf/pic-and-nonpic-6-n32.ad: Likewise. * ld-mips-elf/pic-and-nonpic-6-n64.ad: Likewise. * ld-mips-elf/pic-and-nonpic-6-o32.ad: Likewise. * ld-mips-elf/tlsdyn-o32-1.d: Likewise. * ld-mips-elf/tlsdyn-o32-1.got: Likewise. * ld-mips-elf/tlsdyn-o32-2.d: Likewise. * ld-mips-elf/tlsdyn-o32-2.got: Likewise. * ld-mips-elf/tlsdyn-o32-3.d: Likewise. * ld-mips-elf/tlsdyn-o32-3.got: Likewise. * ld-mips-elf/tlsdyn-o32.d: Likewise. * ld-mips-elf/tlsdyn-o32.got: Likewise. * ld-mips-elf/pie-n32.d: New file. * ld-mips-elf/pie-n64.d: Likewise. * ld-mips-elf/pie-o32.d: Likewise. * ld-mips-elf/pie.s: Likewise. * ld-mips-elf/mips-elf.exp: Add new tests.
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-10-31MIPS: Add Octeon 3 supportNaveen H.S1-0/+1
binutils: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * readelf.c (print_mips_isa_ext): Print the value of Octeon3. gas: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3. (mips_cpu_info_table): Octeon3 enables virt ase. * doc/c-mips.texi: Document octeon3 as an acceptable value for -march=. gas/testsuite: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * gas/mips/mips.exp: Add support for Octeon3 architecture. Also add in support for running Octeon3 tests. * gas/mips/octeon3.d: New test. * gas/mips/octeon3.s: New test source. opcodes: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * mips-dis.c (mips_arch_choices): Add octeon3. * mips-opc.c (IOCT): Include INSN_OCTEON3. (IOCT2): Likewise. (IOCT3): New define. (IVIRT): New define. (mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0, tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti IVIRT instructions. Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another operand for IOCT3. bfd: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * archures.c: Add octeon3 for mips target. * bfd-in2.h: Regenerate. * bfd/cpu-mips.c: Define I_mipsocteon3. nfo_struct): Add octeon3 support. * bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for octeon3. (mips_set_isa_flags): Add support for octeon3. (bfd_mips_isa_ext): Add bfd_mach_mips_octeon3. (mips_mach_extensions): Make bfd_mach_mips_octeon3 an extension of bfd_mach_mips_octeon2. (print_mips_isa_ext): Print the value of Octeon3.
2014-10-22Show information about unknown ASEs and extensions in .MIPS.abiflagsMatthew Fortune1-0/+1
bfd/ * elfxx-mips.c (print_mips_ases): Print unknown ASEs. (print_mips_isa_ext): Print the value of an unknown extension. binutils/ * readelf.c (print_mips_ases): Print unknown ASEs. (print_mips_isa_ext): Print the value of an unknown extension. include/ * elf/mips.h (AFL_ASE_MASK): Define.
2014-09-15Add support for MIPS R6.Andrew Bennett1-1/+14
bfd/ * aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6. * archures.c (bfd_architecture): Likewise. * bfd-in2.h (bfd_architecture): Likewise. (bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. * cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6. * elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2 R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. * elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. * elfn32-mips.c: Likewise. * elfxx-mips.c (MIPSR6_P): New define. (mipsr6_exec_plt_entry): New array. (hi16_reloc_p): Add support for R_MIPS_PCHI16. (lo16_reloc_p): Add support for R_MIPS_PCLO16. (aligned_pcrel_reloc_p): New function. (mips_elf_relocation_needs_la25_stub): Add support for relocs: R_MIPS_PC21_S2 and R_MIPS_PC26_S2. (mips_elf_calculate_relocation): Add support for relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6. (mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16. (_bfd_mips_elf_check_relocs): Add support for relocs: R_MIPS_PC21_S2 and R_MIPS_PC26_S2. (_bfd_mips_elf_relocate_section): Add a check for unaligned pc relative relocs. (_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6 plt entry. (mips_set_isa_flags): Add support for mips32r6 and mips64r6. (_bfd_mips_elf_print_private_bfd_data): Likewise. (mips_32bit_flags_p): Add support for mips32r6. * libbfd.h (bfd_reloc_code_real_names): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. * reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. binutils/ * readelf.c (get_machine_flags): Add support for mips32r6 and mips64r6. elfcpp/ * mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants. gas/ * config/tc-mips.c (mips_nan2008): New static global. (mips_flag_nan2008): Removed. (LL_SC_FMT): New define. (COP12_FMT): Updated. (ISA_IS_R6): New define. (ISA_HAS_64BIT_REGS): Add mips64r6. (ISA_HAS_DROR): Likewise. (ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6. (ISA_HAS_ROR): Likewise. (ISA_HAS_ODD_SINGLE_FPR): Likewise. (ISA_HAS_MXHC1): Likewise. (hilo_interlocks): Likewise. (md_longopts): Likewise. (ISA_HAS_LEGACY_NAN): New define. (options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6. (mips_ase): Add field rem_rev. (mips_ases): Updated to add which ISA an ASE was removed in. (mips_isa_rev): Add support for mips32r6 and mips64r6. (mips_check_isa_supports_ase): Add support to check if an ASE has been removed in the specified MIPS ISA revision. (validate_mips_insn): Skip '-' character. (macro_build): Likewise. (mips_check_options): Prevent R6 working with fp32, mips16, micromips, or branch relaxation. (file_mips_check_options): Set R6 floating point registers to 64 bit. Also deal with the nan2008 option. (limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. (match_check_prev_operand): New static function. (match_same_rs_rt_operand): New static function. (match_non_zero_reg_operand): New static function. (match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. (insns_between): Added case to deal with forbidden slots. (append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2 and BFD_RELOC_MIPS_26_PCREL_S2. (match_insn): Add support for operands -A, -B, +' and +". Also skip '-' character. (mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo. (md_parse_option): Add support for mips32r6 and mips64r6. Also update the nan option handling. (md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2. (mips_force_relocation): Prevent forced relaxation for MIPS r6. (md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (s_mipsset): Add support for mips32r6 and mips64r6. (s_nan): Update to support the new nan2008 framework. (tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (mips_elf_final_processing): Updated to use the mips_nan2008. (mips_cpu_info_table): Add entries for mips32r6 and mips64r6. (macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref macros for R6. (mips_fix_adjustable): Make PC relative R6 relocations relative to the symbol and not the section. * configure.ac: Add support for mips32r6 and mips64r6. * configure: Regenerate. * doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line options. * doc/as.texinfo: Likewise. gas/testsuite/ * gas/mips/24k-triple-stores-1.s: If testing for r6 prevent non-supported instructions from being tested. * gas/mips/24k-triple-stores-2.s: Likewise. * gas/mips/24k-triple-stores-3.s: Likewise. * gas/mips/24k-triple-stores-6.s: Likewise. * gas/mips/beq.s: Likewise. * gas/mips/eva.s: Likewise. * gas/mips/ld-zero-3.s: Likewise. * gas/mips/mips32-cp2.s: Likewise. * gas/mips/mips32.s: Likewise. * gas/mips/mips4.s: Likewise. * gas/mips/add.s: Don't test the add instructions if r6, and add padding. * gas/mips/add.d: Check for a triple dot not a nop at the end of the disassembly output. * gas/mips/micromips@add.d: Likewise. * gas/mips/mipsr6@24k-branch-delay-1.d: New file. * gas/mips/mipsr6@24k-triple-stores-1.d: New file. * gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file. * gas/mips/mipsr6@24k-triple-stores-2.d: New file. * gas/mips/mipsr6@24k-triple-stores-3.d: New file. * gas/mips/mipsr6@24k-triple-stores-6.d: New file. * gas/mips/mipsr6@add.d: New file. * gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file. * gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file. * gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file. * gas/mips/mipsr6@beq.d: New file. * gas/mips/mipsr6@bge.d: New file. * gas/mips/mipsr6@bgeu.d: New file. * gas/mips/mipsr6@blt.d: New file. * gas/mips/mipsr6@bltu.d: New file. * gas/mips/mipsr6@branch-misc-1.d: New file. * gas/mips/mipsr6@branch-misc-2-64.d: New file. * gas/mips/mipsr6@branch-misc-2pic-64.d: New file. * gas/mips/mipsr6@branch-misc-4-64.d: New file. * gas/mips/mipsr6@cache.d: New file. * gas/mips/mipsr6@eva.d: New file. * gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file. * gas/mips/mipsr6@jal-svr4pic.d: New file. * gas/mips/mipsr6@ld-zero-2.d: New file. * gas/mips/mipsr6@ld-zero-3.d: New file. * gas/mips/mipsr6@loc-swap-dis.d: New file. * gas/mips/mipsr6@mips32-cp2.d: New file. * gas/mips/mipsr6@mips32-imm.d: New file. * gas/mips/mipsr6@mips32.d: New file. * gas/mips/mipsr6@mips32r2.d: New file. * gas/mips/mipsr6@mips4-fp.d: New file. * gas/mips/mipsr6@mips4-fp.l: New file. * gas/mips/mipsr6@mips4-fp.s: New file. * gas/mips/mipsr6@mips4.d: New file. * gas/mips/mipsr6@mips5-fp.d: New file. * gas/mips/mipsr6@mips5-fp.l: New file. * gas/mips/mipsr6@mips5-fp.s: New file. * gas/mips/mipsr6@mips64.d: New file. * gas/mips/mipsr6@msa-branch.d: New file. * gas/mips/mipsr6@msa.d: New file. * gas/mips/mipsr6@pref.d: New file. * gas/mips/mipsr6@relax-swap3.d: New file. * gas/mips/r6-64-n32.d: New file. * gas/mips/r6-64-n64.d: New file. * gas/mips/r6-64-removed.l: New file. * gas/mips/r6-64-removed.s: New file. * gas/mips/r6-64.s: New file. * gas/mips/r6-attr-none-double.d: New file. * gas/mips/r6-n32.d: New file. * gas/mips/r6-n64.d: New file. * gas/mips/r6-removed.l: New file. * gas/mips/r6-removed.s: New file. * gas/mips/r6.d: New file. * gas/mips/r6.s: New file. * gas/mips/mipsr6@mips32-dsp.d: New file. * gas/mips/mipsr6@mips32-dspr2.d: New file. * gas/mips/mipsr6@mips32r2-ill.l: New file. * gas/mips/mipsr6@mips32r2-ill.s: New file. * gas/mips/cache.s: Add r6 instruction varients. * gas/mips/mips.exp: Add support for the mips32r6 and mips64r6 architectures. Also prevent non r6 supported tests from running. Finally, add in support for running the new r6 tests. (run_dump_test_arch): Add support for mipsr6 tests. (run_list_test_arch): Add support for using files of the form arch@testname.l . include/elf/ * mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (E_MIPS_ARCH_32R6): New define. (E_MIPS_ARCH_64R6): New define. include/opcode/ * mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6 instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; (mips_check_prev_operand): New struct. (INSN2_FORBIDDEN_SLOT): New define. (INSN_ISA32R6): New define. (INSN_ISA64R6): New define. (INSN_UPTO32R6): New define. (INSN_UPTO64R6): New define. (mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6. (ISA_MIPS32R6): New define. (ISA_MIPS64R6): New define. (CPU_MIPS32R6): New define. (CPU_MIPS64R6): New define. (cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6. ld/ * ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6. opcodes/ * mips-dis.c (mips_arch_choices): Add entries for mips32r6 and mips64r6. (parse_mips_dis_option): Allow MSA and virtualization support for mips64r6. (mips_print_arg_state): Add fields dest_regno and seen_dest. (mips_seen_register): New function. (print_insn_arg): Refactored code to use mips_seen_register function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out the register rather than aborting. (print_insn_args): Add length argument. Add code to correctly calculate the instruction address for pc relative instructions. (validate_insn_args): New static function. (print_insn_mips): Prevent jalx disassembling for r6. Use validate_insn_args. (print_insn_micromips): Use validate_insn_args. all the arguments are valid. * mips-formats.h (PREV_CHECK): New define. * mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; (RD_pc): New define. (FS): New define. (I37): New define. (I69): New define. (mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded MIPS R6 instructions from MIPS R2 instructions.
2014-07-29[MIPS] Implement O32 FPXX, FP64 and FP64A ABI extensionsMatthew Fortune1-1/+122
Specification: https://dmz-portal.mips.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking include/ * elf/mips.h (PT_MIPS_ABIFLAGS, SHT_MIPS_ABIFLAGS): Define. (Val_GNU_MIPS_ABI_FP_OLD_64): Rename from Val_GNU_MIPS_ABI_FP_64. (Val_GNU_MIPS_ABI_FP_64): Redefine. (Val_GNU_MIPS_ABI_FP_XX): Define. (Elf_External_ABIFlags_v0, Elf_Internal_ABIFlags_v0): New structures. (AFL_REG_NONE, AFL_REG_32, AFL_REG_64, AFL_REG_128): Define. (AFL_ASE_DSP, AFL_ASE_DSPR2, AFL_ASE_EVA, AFL_ASE_MCU): Likewise. (AFL_ASE_MDMX, AFL_ASE_MIPS3D, AFL_ASE_MT, AFL_ASE_SMARTMIPS): Likewise. (AFL_ASE_VIRT, AFL_ASE_MSA, AFL_ASE_MIPS16): Likewise. (AFL_ASE_MICROMIPS, AFL_ASE_XPA): Likewise. (AFL_EXT_XLR, AFL_EXT_OCTEON2, AFL_EXT_OCTEONP): Likewise. (AFL_EXT_LOONGSON_3A, AFL_EXT_OCTEON, AFL_EXT_5900): Likewise. (AFL_EXT_4650, AFL_EXT_4010, AFL_EXT_4100, AFL_EXT_3900): Likewise. (AFL_EXT_10000, AFL_EXT_SB1, AFL_EXT_4111, AFL_EXT_4120): Likewise. (AFL_EXT_5400, AFL_EXT_5500, AFL_EXT_LOONGSON_2E): Likewise. (AFL_EXT_LOONGSON_2F): Likewise. (bfd_mips_elf_swap_abiflags_v0_in): Prototype. (bfd_mips_elf_swap_abiflags_v0_out): Likewise. (bfd_mips_isa_ext): Likewise. bfd/ * elfxx-mips.c (ABI_O32_P, MIPS_ELF_ABIFLAGS_SECTION_NAME_P): New macro. (mips_elf_obj_tdata): Add abiflags and abiflags_valid fields. (bfd_mips_elf_swap_abiflags_v0_in): New function. (bfd_mips_elf_swap_abiflags_v0_out): Likewise. (_bfd_mips_elf_section_from_shdr): Handle SHT_MIPS_ABIFLAGS. (_bfd_mips_elf_fake_sections): Likewise. (_bfd_mips_elf_always_size_sections): Handle .MIPS.abiflags. (_bfd_mips_elf_additional_program_headers): Account for new PT_MIPS_ABIFLAGS program header. (_bfd_mips_elf_modify_segment_map): Create PT_MIPS_ABIFLAGS segment and associate with .MIPS.abiflags. (_bfd_mips_elf_gc_mark_extra_sections): New function. (bfd_mips_isa_ext, update_mips_abiflags_isa): New static function. (infer_mips_abiflags): Likewise. (_bfd_mips_elf_final_link): Handle .MIPS.abiflags. (mips_32bit_flags_p): Moved higher. (mips_elf_merge_obj_attributes, _bfd_mips_fp_abi_string): Error checking for FP ABIs. (_bfd_mips_elf_merge_private_bfd_data): Restructure and add abiflags checks. Check EF_MIPS_FP64 flag consistency. (print_mips_ases, print_mips_isa_ext): New static function. (print_mips_fp_abi_value, get_mips_reg_size): Likewise. (_bfd_mips_elf_print_private_bfd_data): Display abiflags data. (_bfd_mips_post_process_headers): Set EI_ABIVERSION = 3 for Val_GNU_MIPS_ABI_FP_64 or Val_GNU_MIPS_ABI_FP_64A. * elfxx-mips.h (_bfd_mips_elf_gc_mark_extra_sections): New prototype. * elf32-mips.c (elf_backend_gc_mark_extra_sections): Implement. * elfn32-mips.c (elf_backend_gc_mark_extra_sections): Implement. * elf64-mips.c (elf_backend_gc_mark_extra_sections): Implement. binutils/ * readelf.c (get_mips_segment_type): Display name for PT_MIPS_ABIFLAGS. (get_mips_section_type_name): Display name for SHT_MIPS_ABIFLAGS. (display_mips_gnu_attribute): Abstracted fp abi printing to... (print_mips_fp_abi_value): New static function. Handle new FP ABIs. (print_mips_ases, print_mips_isa_ext): New static functions. (get_mips_reg_size): Likewise. (process_mips_specific): Display abiflags data. elfcpp/ * elfcpp.h (PT_MIPS_ABIFLAGS): New program header type. gas/ * config/tc-mips.c (mips_flags_frag): New static global. (struct mips_set_options): Add oddspreg field. (file_mips_opts, mips_opts): Initialize oddspreg. (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and Loongson-3a. (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg and -mno-odd-spreg options. (md_begin): Create .MIPS.abiflags section. (fpabi_incompatible_with, fpabi_requires): New static function. (check_fpabi): Likewise. (mips_check_options): Handle fp=xx and oddspreg restrictions. (file_mips_check_options): Set oddspreg by default for fp=xx. (mips_oddfpreg_ok): Re-write function. (check_regno): Check odd numbered registers regardless of FPR size. For fp != 32 use as_bad instead of as_warn. (match_float_constant): Rewrite check regarding FP register width. Add support for generating constants when MXHC1 is present. Handle fp=xx to comply with the ABI. (macro): Update M_LI_DD similarly to match_float_constant. Generate MTHC1 when available. Check that correct code can be generated for fp=xx and fp=64 ABIs. (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg options. (mips_convert_ase_flags): New static function. (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64 to determine when to add the EF_MIPS_FP64 flag. Populate the .MIPS.abiflags section. (md_mips_end): Update .gnu_attribute based on command line and .module as applicable. Use check_fpabi to ensure .gnu.attribute and command line/.module options are consistent. * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new -mfpxx, -modd-spreg and -mno-odd-spreg options. * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg, gnu_attribute values and FP ABIs. ld/ * emulparams/elf32bmip.sh: Add .MIPS.abiflags. * emulparams/elf32bmipn32-defs.sh: Likewise. * emulparams/elf64bmip-defs.sh: Likewise. opcodes/ * micromips-opc.c (COD, LCD) New macros. (cfc1, ctc1): Remove FP_S attribute. (dmfc1, mfc1, mfhc1): Add LCD attribute. (dmtc1, mtc1, mthc1): Add COD attribute. * mips-opc.c (cfc1, cftc1, ctc, cttc1): Remove FP_S attribute. binutils/testsuite/ * binutils-all/readelf.s: Account for .MIPS.abiflags and .gnu.attributes. * binutils-all/readelf.ss-tmips: Likewise. * binutils-all/strip-3.d: Likewise. gas/testsuite/ * gas/mips/attr-gnu-4-0.d: New. * gas/mips/attr-gnu-4-0.s: Likewise. * gas/mips/attr-gnu-4-1-mfp32.l: Likewise. * gas/mips/attr-gnu-4-1-mfp32.s: Likewise. * gas/mips/attr-gnu-4-1-mfp64.l: Likewise. * gas/mips/attr-gnu-4-1-mfp64.s: Likewise. * gas/mips/attr-gnu-4-1-mfpxx.s: Likewise. * gas/mips/attr-gnu-4-1-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-1-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-1-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-1-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-1.d: Likewise. * gas/mips/attr-gnu-4-1.s: Likewise. * gas/mips/attr-gnu-4-2-mdouble-float.l: Likewise. * gas/mips/attr-gnu-4-2-mdouble-float.s: Likewise. * gas/mips/attr-gnu-4-2-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-2-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-2.d: Likewise. * gas/mips/attr-gnu-4-2.s: Likewise. * gas/mips/attr-gnu-4-3-mhard-float.l: Likewise. * gas/mips/attr-gnu-4-3-mhard-float.s: Likewise. * gas/mips/attr-gnu-4-3.d: Likewise. * gas/mips/attr-gnu-4-3.s: Likewise. * gas/mips/attr-gnu-4-4.l: Likewise. * gas/mips/attr-gnu-4-4.s: Likewise. * gas/mips/attr-gnu-4-5-64.l: Likewise. * gas/mips/attr-gnu-4-5-64.s: Likewise. * gas/mips/attr-gnu-4-5.d: Likewise. * gas/mips/attr-gnu-4-5.l: Likewise. * gas/mips/attr-gnu-4-5.s: Likewise. * gas/mips/attr-gnu-4-6-64.l: Likewise. * gas/mips/attr-gnu-4-6-64.s: Likewise. * gas/mips/attr-gnu-4-6.d: Likewise. * gas/mips/attr-gnu-4-6.l: Likewise. * gas/mips/attr-gnu-4-6.s: Likewise. * gas/mips/attr-gnu-4-6-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-6-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-6-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-6-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-6-noodd.l: Likewise. * gas/mips/attr-gnu-4-6-noodd.s: Likewise. * gas/mips/attr-gnu-4-7-64.l: Likewise. * gas/mips/attr-gnu-4-7-64.s: Likewise. * gas/mips/attr-gnu-4-7-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-7-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-7-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-7-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-7-odd.l: Likewise. * gas/mips/attr-gnu-4-7-odd.s: Likewise. * gas/mips/attr-gnu-4-7.d: Likewise. * gas/mips/attr-gnu-4-7.l: Likewise. * gas/mips/attr-gnu-4-7.s: Likewise. * gas/mips/attr-none-double.d: Likewise. * gas/mips/attr-none-o32-fp64.d: Likewise. * gas/mips/attr-none-o32-fp64-nooddspreg.d * gas/mips/attr-none-o32-fpxx.d: Likewise. * gas/mips/attr-none-single-float.d: Likewise. * gas/mips/attr-none-soft-float.d: Likewise. * gas/mips/elf_arch_mips32r3.d: Likewise. * gas/mips/elf_arch_mips32r5.d: Likewise. * gas/mips/elf_arch_mips64r3.d: Likewise. * gas/mips/elf_arch_mips64r5.d: Likewise. * gas/mips/li-d.d: Likewise. * gas/mips/li-d.s: Likewise. * gas/mips/module-check-warn.l: Likewise. * gas/mips/module-check-warn.s: Likewise. * gas/mips/module-check.d: Likewise. * gas/mips/module-check.s: Likewise. * gas/mips/module-mfp32.d: Likewise. * gas/mips/module-mfp32.s: Likewise. * gas/mips/module-mfp64.d: Likewise. * gas/mips/module-mfp64.s: Likewise. * gas/mips/module-mfp64-noodd.d: Likewise. * gas/mips/module-mfp64-noodd.s: Likewise. * gas/mips/module-mfpxx.d: Likewise. * gas/mips/module-mfpxx.s: Likewise. * gas/mips/module-msingle-float.d: Likewise. * gas/mips/module-msingle-float.s: Likewise. * gas/mips/module-msoft-float.d: Likewise. * gas/mips/module-msoft-float.s: Likewise. * gas/mips/module-set-mfpxx.d: Likewise. * gas/mips/module-set-mfpxx.s: Likewise. * gas/mips/fpxx-oddfpreg.d: Likewise. * gas/mips/fpxx-oddfpreg.l: Likewise. * gas/mips/fpxx-oddfpreg.s: Likewise. * gas/mips/no-odd-spreg.d: Likewise. * gas/mips/odd-spreg.d: Likewise. * gas/elf/section2.e-mips: Adjust expected output. * gas/mips/attr-gnu-abi-fp-1.d: Likewise. * gas/mips/attr-gnu-abi-msa-1.d: Likewise. * gas/mips/call-nonpic-1.d: Likewise. * gas/mips/elf_arch_mips1.d: Likewise. * gas/mips/elf_arch_mips2.d: Likewise. * gas/mips/elf_arch_mips3.d: Likewise. * gas/mips/elf_arch_mips32.d: Likewise. * gas/mips/elf_arch_mips32r2.d: Likewise. * gas/mips/elf_arch_mips4.d: Likewise. * gas/mips/elf_arch_mips5.d: Likewise. * gas/mips/elf_arch_mips64.d: Likewise. * gas/mips/elf_arch_mips64r2.d: Likewise. * gas/mips/elf_ase_micromips-2.d: Likewise. * gas/mips/elf_ase_micromips.d: Likewise. * gas/mips/elf_ase_mips16-2.d: Likewise. * gas/mips/elf_ase_mips16.d: Likewise. * gas/mips/module-defer-warn1.d: Likewise. * gas/mips/module-override.d: Likewise. * gas/mips/n32-consec.d: Likewise. * gas/mips/nan-2008-1.d: Likewise. * gas/mips/nan-2008-2.d: Likewise. * gas/mips/nan-2008-3.d: Likewise. * gas/mips/nan-2008-4.d: Likewise. * gas/mips/nan-legacy-1.d: Likewise. * gas/mips/nan-legacy-2.d: Likewise. * gas/mips/nan-legacy-3.d: Likewise. * gas/mips/nan-legacy-4.d: Likewise. * gas/mips/nan-legacy-5.d: Likewise. * gas/mips/tmips16-e.d: Likewise. * gas/mips/tmips16-f.d: Likewise. * gas/mips/tmipsel16-e.d: Likewise. * gas/mips/tmipsel16-f.d: Likewise. * gas/testsuite/gas/mips/mips.exp: Add new tests. ld/testsuite/ * ld-mips-elf/abiflags-strip1-ph.d: New. * ld-mips-elf/abiflags-strip2-ph.d: Likewise. * ld-mips-elf/abiflags-strip3-ph.d: Likewise. * ld-mips-elf/abiflags-strip4-ph.d: Likewise. * ld-mips-elf/abiflags-strip5-ph.d: Likewise. * ld-mips-elf/abiflags-strip6-ph.d: Likewise. * ld-mips-elf/abiflags-strip7-ph.d: Likewise. * ld-mips-elf/abiflags-strip8-ph.d: Likewise. * ld-mips-elf/abiflags-strip9-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-06.d: Likewise. * ld-mips-elf/attr-gnu-4-07.d: Likewise. * ld-mips-elf/attr-gnu-4-08.d: Likewise. * ld-mips-elf/attr-gnu-4-1-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-1-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-1-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-16.d: Likewise. * ld-mips-elf/attr-gnu-4-17.d: Likewise. * ld-mips-elf/attr-gnu-4-18.d: Likewise. * ld-mips-elf/attr-gnu-4-2-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-2-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-2-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-26.d: Likewise. * ld-mips-elf/attr-gnu-4-27.d: Likewise. * ld-mips-elf/attr-gnu-4-28.d: Likewise. * ld-mips-elf/attr-gnu-4-3-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-3-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-3-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-36.d: Likewise. * ld-mips-elf/attr-gnu-4-37.d: Likewise. * ld-mips-elf/attr-gnu-4-38.d: Likewise. * ld-mips-elf/attr-gnu-4-4-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-46.d: Likewise. * ld-mips-elf/attr-gnu-4-47.d: Likewise. * ld-mips-elf/attr-gnu-4-48.d: Likewise. * ld-mips-elf/attr-gnu-4-5-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-50.d: Likewise. * ld-mips-elf/attr-gnu-4-52.d: Likewise. * ld-mips-elf/attr-gnu-4-53.d: Likewise. * ld-mips-elf/attr-gnu-4-54.d: Likewise. * ld-mips-elf/attr-gnu-4-55.d: Likewise. * ld-mips-elf/attr-gnu-4-56.d: Likewise. * ld-mips-elf/attr-gnu-4-57.d: Likewise. * ld-mips-elf/attr-gnu-4-58.d: Likewise. * ld-mips-elf/attr-gnu-4-6-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-6.s: Likewise. * ld-mips-elf/attr-gnu-4-60.d: Likewise. * ld-mips-elf/attr-gnu-4-61.d: Likewise. * ld-mips-elf/attr-gnu-4-62.d: Likewise. * ld-mips-elf/attr-gnu-4-63.d: Likewise. * ld-mips-elf/attr-gnu-4-64.d: Likewise. * ld-mips-elf/attr-gnu-4-65.d: Likewise. * ld-mips-elf/attr-gnu-4-66.d: Likewise. * ld-mips-elf/attr-gnu-4-67.d: Likewise. * ld-mips-elf/attr-gnu-4-68.d: Likewise. * ld-mips-elf/attr-gnu-4-7-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-7.s: Likewise. * ld-mips-elf/attr-gnu-4-70.d: Likewise. * ld-mips-elf/attr-gnu-4-71.d: Likewise. * ld-mips-elf/attr-gnu-4-72.d: Likewise. * ld-mips-elf/attr-gnu-4-73.d: Likewise. * ld-mips-elf/attr-gnu-4-74.d: Likewise. * ld-mips-elf/attr-gnu-4-75.d: Likewise. * ld-mips-elf/attr-gnu-4-76.d: Likewise. * ld-mips-elf/attr-gnu-4-77.d: Likewise. * ld-mips-elf/attr-gnu-4-78.d: Likewise. * ld-mips-elf/attr-gnu-4-8.s: Likewise. * ld-mips-elf/attr-gnu-4-81.d: Likewise. * ld-mips-elf/empty.s: Likewise. * ld-mips-elf/attr-gnu-4-00.d: Adjust expected output. * ld-mips-elf/attr-gnu-4-01.d: Likewise. * ld-mips-elf/attr-gnu-4-02.d: Likewise. * ld-mips-elf/attr-gnu-4-03.d: Likewise. * ld-mips-elf/attr-gnu-4-04.d: Likewise. * ld-mips-elf/attr-gnu-4-05.d: Likewise. * ld-mips-elf/attr-gnu-4-10.d: Likewise. * ld-mips-elf/attr-gnu-4-11.d: Likewise. * ld-mips-elf/attr-gnu-4-14.d: Likewise. * ld-mips-elf/attr-gnu-4-15.d: Likewise. * ld-mips-elf/attr-gnu-4-2.s: Likewise. * ld-mips-elf/attr-gnu-4-20.d: Likewise. * ld-mips-elf/attr-gnu-4-22.d: Likewise. * ld-mips-elf/attr-gnu-4-24.d: Likewise. * ld-mips-elf/attr-gnu-4-25.d: Likewise. * ld-mips-elf/attr-gnu-4-3.s: Likewise. * ld-mips-elf/attr-gnu-4-30.d: Likewise. * ld-mips-elf/attr-gnu-4-33.d: Likewise. * ld-mips-elf/attr-gnu-4-34.d: Likewise. * ld-mips-elf/attr-gnu-4-35.d: Likewise. * ld-mips-elf/attr-gnu-4-40.d: Likewise. * ld-mips-elf/attr-gnu-4-41.d: Likewise. * ld-mips-elf/attr-gnu-4-42.d: Likewise. * ld-mips-elf/attr-gnu-4-43.d: Likewise. * ld-mips-elf/attr-gnu-4-44.d: Likewise. * ld-mips-elf/attr-gnu-4-45.d: Likewise. * ld-mips-elf/attr-gnu-4-5.s: Likewise. * ld-mips-elf/attr-gnu-4-51.d: Likewise. * ld-mips-elf/attr-gnu-8-00.d: Likewise. * ld-mips-elf/attr-gnu-8-01.d: Likewise. * ld-mips-elf/attr-gnu-8-02.d: Likewise. * ld-mips-elf/attr-gnu-8-10.d: Likewise. * ld-mips-elf/attr-gnu-8-11.d: Likewise. * ld-mips-elf/attr-gnu-8-20.d: Likewise. * ld-mips-elf/attr-gnu-8-22.d: Likewise. * ld-mips-elf/jalx-2.dd: Likewise. * ld-mips-elf/mips16-pic-1.gd: Likewise. * ld-mips-elf/mips16-pic-2.gd: Likewise. * ld-mips-elf/mips16-pic-3.gd: Likewise. * ld-mips-elf/mips16-pic-4a.gd: Likewise. * ld-mips-elf/multi-got-no-shared.d: Likewise. * ld-mips-elf/nan-2008.d: Likewise. * ld-mips-elf/nan-legacy.d: Rework test. * ld-mips-elf/pic-and-nonpic-3a.gd: Likewise. * ld-mips-elf/pic-and-nonpic-3b.gd: Likewise. * ld-mips-elf/pic-and-nonpic-5b.gd: Likewise. * ld-mips-elf/pic-and-nonpic-6.ld: Likewise. * ld-mips-elf/rel32-n32.d: Likewise. * ld-mips-elf/rel32-o32.d: Likewise. * ld-mips-elf/rel64.d: Likewise. * ld-mips-elf/tls-multi-got-1.r: Likewise. * ld-elf/group.ld: Discard .MIPS.abiflags and .gnu.attributes. * ld-elf/orphan-region.ld: Likewise. * ld-elf/orphan.ld: Likewise. * ld-mips-elf/compressed-plt-1.ld: Likewise. * ld-mips-elf/dyn-sec64.ld: Likewise. * ld-mips-elf/got-dump-1.ld: Likewise. * ld-mips-elf/got-dump-2.ld: Likewise. * ld-mips-elf/got-page-1.ld: Likewise. * ld-mips-elf/mips-dyn.ld: Likewise. * ld-mips-elf/mips-lib.ld: Likewise. * ld-mips-elf/pic-and-nonpic-3a.ld: Likewise. * ld-mips-elf/pic-and-nonpic-3b.ld: Likewise. * ld-mips-elf/pic-and-nonpic-4b.ld: Likewise. * ld-mips-elf/pic-and-nonpic-5b.ld: Likewise. * ld-mips-elf/region1.t: Likewise. * ld-mips-elf/stub-dynsym-1.ld: Likewise. * ld-mips-elf/tls-hidden3.ld: Likewise. * ld-mips-elf/vxworks1.ld: Likewise. * ld-scripts/overlay-size.t: Likewise. * ld-mips-elf/elf-rel-got-n32-embed.d: Remove .MIPS.abiflags from objects. * ld-mips-elf/elf-rel-got-n32.d: Likewise. * ld-mips-elf/elf-rel-got-n64-embed.d: Likewise. * ld-mips-elf/elf-rel-got-n64-linux.d: Likewise. * ld-mips-elf/elf-rel-got-n64.d: Likewise. * ld-mips-elf/elf-rel-xgot-n32.d: Likewise. * ld-mips-elf/elf-rel-xgot-n32-embed.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64-linux.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64-embed.d: Likewise. * ld-mips-elf/mips-elf.exp: Add new tests.
2014-03-05Update copyright yearsAlan Modra1-3/+1
2014-02-06binutils/ChangeLog:Andrew Pinski1-0/+1
2014-02-06 Andrew Pinski <apinski@cavium.com> * readelf.c (get_machine_flags): Handle E_MIPS_MACH_OCTEON3 case. elfcpp/ChangeLog: 2014-02-06 Andrew Pinski <apinski@cavium.com> * mips.h (E_MIPS_MACH_OCTEON3): New enum constant. include/elf/ChangeLog: 2014-02-06 Andrew Pinski <apinski@cavium.com> * mips.h (E_MIPS_MACH_OCTEON3): New machine flag.
2013-10-142013-10-14 Chao-ying Fu <Chao-ying.Fu@imgtec.com>Chao-ying Fu1-0/+11
* mips.h (enum): Add Tag_GNU_MIPS_ABI_MSA. (enum): Add Val_GNU_MIPS_ABI_MSA_ANY and Val_GNU_MIPS_ABI_MSA_128.
2013-09-172013-09-17 Doug Gilmore <Doug.Gilmore@imgtec.com>Steve Ellcey1-0/+3
* mips.h (EF_MIPS_FP64): New e_flags bit.
2013-07-15 include/elf/Maciej W. Rozycki1-5/+24
* mips.h (Tag_GNU_MIPS_ABI_FP): Remove comment. (Val_GNU_MIPS_ABI_FP_ANY, Val_GNU_MIPS_ABI_FP_DOUBLE, Val_GNU_MIPS_ABI_FP_SINGLE, Val_GNU_MIPS_ABI_FP_SOFT, Val_GNU_MIPS_ABI_FP_64): New enum. bfd/ * elfxx-mips.c (mips_elf_merge_obj_attributes): Replace hardcoded magic numbers with enum values. binutils/ * readelf.c (display_mips_gnu_attribute): Replace hardcoded magic numbers with enum values. gdb/ * mips-tdep.c (mips_gdbarch_init): Replace hardcoded magic numbers with enum values.
2013-07-12 include/elf/Maciej W. Rozycki1-0/+3
* mips.h (EF_MIPS_NAN2008): New macro. bfd/ * elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Handle EF_MIPS_NAN2008. (_bfd_mips_elf_print_private_bfd_data): Likewise. binutils/ * readelf.c (get_machine_flags): Handle EF_MIPS_NAN2008. gas/ * config/tc-mips.c (mips_flag_nan2008): New variable. (options): Add OPTION_NAN enum value. (md_longopts): Handle it. (md_parse_option): Likewise. (s_nan): New function. (mips_elf_final_processing): Handle EF_MIPS_NAN2008. (md_show_usage): Add -mnan. * doc/as.texinfo (Overview): Add -mnan. * doc/c-mips.texi (MIPS Opts): Document -mnan. (MIPS NaN Encodings): New node. Document .nan directive. (MIPS-Dependent): List the new node. gas/testsuite/ * gas/mips/nan-2008-1.d: New test. * gas/mips/nan-2008-2.d: New test. * gas/mips/nan-2008-3.d: New test. * gas/mips/nan-2008-4.d: New test. * gas/mips/nan-legacy-1.d: New test. * gas/mips/nan-legacy-2.d: New test. * gas/mips/nan-legacy-3.d: New test. * gas/mips/nan-legacy-4.d: New test. * gas/mips/nan-legacy-5.d: New test. * gas/mips/nan-error-1.l: New list test. * gas/mips/nan-error-2.l: New list test. * gas/mips/nan-2008-override.s: New test source. * gas/mips/nan-2008.s: New test source. * gas/mips/nan-legacy-override.s: New test source. * gas/mips/nan-legacy.s: New test source. * gas/mips/nan-error-1.s: New test source. * gas/mips/nan-error-2.s: New test source. * gas/mips/mips.exp: Run the new tests. ld/testsuite/ * ld-mips-elf/nan-2008.d: New test. * ld-mips-elf/nan-legacy.d: New test. * ld-mips-elf/nan-mixed-1.d: New test. * ld-mips-elf/nan-mixed-2.d: New test. * ld-mips-elf/nan-2008.s: New test source. * ld-mips-elf/nan-legacy.s: New test source.
2013-06-24 bfd/Maciej W. Rozycki1-2/+8
* elfxx-mips.h (_bfd_mips_elf_get_synthetic_symtab): New prototype. * elf32-mips.c (elf_backend_plt_sym_val): Remove macro. (bfd_elf32_get_synthetic_symtab): New macro. * elfxx-mips.c (plt_entry): New structure. (mips_elf_link_hash_entry): Add use_plt_entry member. (mips_elf_link_hash_table): Rename plt_entry_size member to plt_mips_entry_size. Add plt_comp_entry_size, plt_mips_offset, plt_comp_offset, plt_got_index entries and plt_header_is_comp members. (STUB_LW_MICROMIPS, STUB_MOVE_MICROMIPS): New macros. (STUB_LUI_MICROMIPS, STUB_JALR_MICROMIPS): Likewise. (STUB_ORI_MICROMIPS, STUB_LI16U_MICROMIPS): Likewise. (STUB_LI16S_MICROMIPS): Likewise. (MICROMIPS_FUNCTION_STUB_NORMAL_SIZE): Likewise. (MICROMIPS_FUNCTION_STUB_BIG_SIZE): Likewise. (micromips_o32_exec_plt0_entry): New variable. (mips16_o32_exec_plt_entry): Likewise. (micromips_o32_exec_plt_entry): Likewise. (mips_elf_link_hash_newfunc): Initialize use_plt_entry. (mips_elf_output_extsym): Update to use gotplt_union's plist member rather than offset. (mips_elf_gotplt_index): Likewise. Remove the VxWorks restriction. Use MIPS_ELF_GOT_SIZE to calculate GOT address. (mips_elf_count_got_symbols): Update to use gotplt_union's plist member rather than offset. (mips_elf_calculate_relocation): Handle MIPS16/microMIPS PLT entries. (_bfd_mips_elf_create_dynamic_sections): Don't set PLT sizes here. (mips_elf_make_plt_record): New function. (_bfd_mips_elf_check_relocs): Update comment. Record occurences of JAL relocations that might need a PLT entry. (_bfd_mips_elf_adjust_dynamic_symbol): Update to use gotplt_union's plist member rather than offset. Set individual PLT entry sizes here. Handle MIPS16/microMIPS PLT entries. Don't set the symbol's value in the symbol table for PLT references here. Don't set the PLT or PLT GOT section sizes here. (mips_elf_estimate_stub_size): Handle microMIPS stubs. (mips_elf_allocate_lazy_stub): Likewise. (mips_elf_lay_out_lazy_stubs): Likewise. Define a _MIPS_STUBS_ magic symbol. (mips_elf_set_plt_sym_value): New function. (_bfd_mips_elf_size_dynamic_sections): Set PLT header size and PLT and PLT GOT section sizes here. Set the symbol values in the symbol table for PLT references here. Handle microMIPS annotation of the _PROCEDURE_LINKAGE_TABLE_ magic symbol. (_bfd_mips_elf_finish_dynamic_symbol): Update to use gotplt_union's plist member rather than offset. Handle MIPS16/microMIPS PLT entries. Handle microMIPS stubs. (_bfd_mips_vxworks_finish_dynamic_symbol): Update to use gotplt_union's plist member rather than offset. Use MIPS_ELF_GOT_SIZE to calculate GOT address. (mips_finish_exec_plt): Handle microMIPS PLT. Return status. (_bfd_mips_elf_finish_dynamic_sections): Handle result from mips_finish_exec_plt. (_bfd_mips_elf_link_hash_table_create): Update to use gotplt_union's plist member rather than offset. (_bfd_mips_elf_get_synthetic_symtab): New function. include/elf/ * mips.h (ELF_ST_IS_MIPS_PLT): Respect STO_MIPS16 setting. (ELF_ST_SET_MIPS_PLT): Likewise. gdb/ * mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and microMIPS synthetic symbols. ld/ * emulparams/elf32btsmip.sh: Arrange for .got.plt to be placed as close to .plt as possible. * scripttempl/elf.sc: Handle $INITIAL_READWRITE_SECTIONS and $PLT_NEXT_DATA variables. ld/testsuite/ * ld-mips-elf/jalx-2.dd: Update for microMIPS PLT support. * ld-mips-elf/pic-and-nonpic-3a.dd: Update for the _MIPS_STUBS_ magic symbol. * ld-mips-elf/pic-and-nonpic-3b.dd: Likewise. * ld-mips-elf/pic-and-nonpic-6-n32.dd: Likewise. * ld-mips-elf/pic-and-nonpic-6-n64.dd: Likewise. * ld-mips-elf/pic-and-nonpic-6-o32.dd: Likewise. * ld-mips-elf/stub-dynsym-1-10000.d: Likewise. * ld-mips-elf/stub-dynsym-1-2fe80.d: Likewise. * ld-mips-elf/stub-dynsym-1-7fff.d: Likewise. * ld-mips-elf/stub-dynsym-1-8000.d: Likewise. * ld-mips-elf/stub-dynsym-1-fff0.d: Likewise. * ld-mips-elf/tlslib-o32.d: Likewise. opcodes/ * mips-dis.c (is_mips16_plt_tail): New function. (print_insn_mips16): Handle MIPS16 PLT entry's GOT slot address word. (is_compressed_mode_p): Handle MIPS16/microMIPS PLT entries.
2013-06-06 * mips.h (ELF_ST_SET_MIPS_PIC): Clear any STO_MIPS16 setting.Maciej W. Rozycki1-1/+4
2013-05-302013-05-30 Paul Brook <paul@codesourcery.com>Catherine Moore1-0/+1
bfd/ * bfd-in2.h: Regenerate. * elf32-mips.c (elf_mips_eh_howto): New. (bfd_elf32_bfd_reloc_type_lookup ): Support BFD_RELOC_MIPS_EH. (bfd_elf32_bfd_reloc_name_lookup): Likewise. (mips_elf32_rtype_to_howto): Support R_MIPS_EH. * elf64-mips.c (elf_mips_eh_howto): New. (bfd_elf64_bfd_reloc_type_lookup): Support BFD_RELOC_MIPS_EH. (bfd_elf64_bfd_reloc_name_lookup): Likewise. (mips_elf64_rtype_to_howto): Support R_MIPS_EH. * libbfd.h: Regenerate. * reloc.c (BFD_RELOC_MIPS_EH): New. gas/ * config/tc-mips.c (md_apply_fix): Support BFD_RELOC_MIPS_EH. include/elf * mips.h (R_MIPS_EH): New.
2013-05-062013-05-06 Paul Brook <paul@codesourcery.com>Catherine Moore1-3/+2
include/elf/ * mips.h (R_MIPS_PC32): Update comment. * elf64-mips.c (elf_mips_gnu_pcrel32): New. (bfd_elf64_bfd_reloc_type_lookup, bfd_elf64_bfd_reloc_name_lookup, mips_elf64_rtype_to_howto): Handle R_MIPS_PC32. * elfn32-mips.c (elf_mips_gnu_pcrel32): New. (bfd_elfn32_bfd_reloc_type_lookup, bfd_elfn32_bfd_reloc_name_lookup, mips_elfn32_rtype_to_howto): Handle R_MIPS_PC32. 2013-05-06 Paul Brook <paul@codesourcery.com> Catherine Moore <clm@codesourcery.com> gas/ * config/tc-mips.c (md_pcrel_from): Handle BFD_RELOC_32_PCREL. (limited_pcrel_reloc_p): Likewise. (md_apply_fix): Likewise. (tc_gen_reloc): Likewise.
2013-01-04 * archures.c: Add support for MIPS r5900Nick Clifton1-1/+2
* bfd-in2.h: Add support for MIPS r5900 * config.bfd: Add support for Sony Playstation 2 * cpu-mips.c: Add support for MIPS r5900 * elfxx-mips.c: Add support for MIPS r5900 (extension of r4000) * config/tc-mips.c: Add support for MIPS r5900 Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq. * config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot. * config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900. * config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I. * config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900. * configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu). * config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900. * elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software. * opcode/mips.h: Add support for r5900 instructions including lq and sq. * configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk). * emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32. * emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32. * Makefile.am: Add linker scripts for Sony Playstation 2 ELF files. * opcodes/mips-dis.c: Add names for CP0 registers of r5900. * opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq. * opcodes/mips-opc.c: Add support for MIPS r5900 CPU. Add support for 128 bit MMI (Multimedia Instructions). Add support for EE instructions (Emotion Engine). Disable unsupported floating point instructions (64 bit and undefined compare operations). Enable instructions of MIPS ISA IV which are supported by r5900. Disable 64 bit co processor instructions. Disable 64 bit multiplication and division instructions. Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)). Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900. Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
2012-11-08 * mips.h (EF_MIPS_32BITMODE): Move next to lower-order bits.Maciej W. Rozycki1-4/+4
2011-12-192011-12-19 Chung-Lin Tang <cltang@codesourcery.com>Chung-Lin Tang1-1/+8
gas/ * config/tc-mips.c (mips_pseudo_table): Add tprelword/tpreldword entries. (mips16_percent_op): Add MIPS16 TLS relocation ops. (md_apply_fix): Add BFD_RELOC_MIPS16_TLS_* switch cases. (s_tls_rel_directive): Rename from s_dtprel_internal(). Abstract out directive string and reloc type as function parameters. Update comments. (s_dtprelword,s_dtpreldword): Change to use s_tls_rel_directive(). (s_tprelword,s_tpreldword): New functions. include/ * elf/mips.h (elf_mips_reloc_type): Add R_MIPS16_TLS_* entries. bfd/ * reloc.c (BFD_RELOC_MIPS16_TLS_GD,BFD_RELOC_MIPS16_TLS_LDM, BFD_RELOC_MIPS16_TLS_DTPREL_HI16,BFD_RELOC_MIPS16_TLS_DTPREL_LO16, BFD_RELOC_MIPS16_TLS_GOTTPREL,BFD_RELOC_MIPS16_TLS_TPREL_HI16, BFD_RELOC_MIPS16_TLS_TPREL_LO16): New relocations for MIPS16 TLS. * bfd-in2.h (bfd_reloc_code_real): Regenerate. * libbfd.h (bfd_reloc_code_real_names): Regenerate. * elf32-mips.c (elf_mips16_howto_table_rel): Add R_MIPS16_TLS_* entries. (mips16_reloc_map): Add BFD_RELOC_MIPS16_TLS_* to R_MIPS16_TLS_* mappings. * elfn32-mips.c (elf_mips16_howto_table_rel, elf_mips16_howto_table_rela): Add R_MIPS16_TLS_* entries. (mips16_reloc_map): Add BFD_RELOC_MIPS16_TLS_* to R_MIPS16_TLS_* mappings. * elf64-mips.c (mips16_elf64_howto_table_rel, mips16_elf64_howto_table_rela): Add R_MIPS16_TLS_* entries. (mips16_reloc_map): Add BFD_RELOC_MIPS16_TLS_* to R_MIPS16_TLS_* mappings. * elfxx-mips.c (TLS_RELOC_P,mips16_reloc_p, _bfd_mips_elf_check_relocs): Add cases for R_MIPS16_TLS_* relocations. (tls_gd_reloc_p): Add R_MIPS16_TLS_GD case. (tls_ldm_reloc_p): Add R_MIPS16_TLS_LDM case. (tls_gottprel_reloc_p): Add R_MIPS16_TLS_GOTTPREL case. (mips_elf_calculate_relocation): Add cases for R_MIPS16_TLS_*, R_MIPS_TLS_DTPREL32/64, and R_MIPS_TLS_TPREL32/64 relocations.
2011-07-24bfd/Richard Sandiford1-7/+77
2011-02-25 Chao-ying Fu <fu@mips.com> Ilie Garbacea <ilie@mips.com> Maciej W. Rozycki <macro@codesourcery.com> Joseph Myers <joseph@codesourcery.com> Catherine Moore <clm@codesourcery.com> Richard Sandiford <rdsandiford@googlemail.com> * archures.c (bfd_mach_mips_micromips): New macro. * cpu-mips.c (I_micromips): New enum value. (arch_info_struct): Add bfd_mach_mips_micromips. * elfxx-mips.h (_bfd_mips_elf_is_target_special_symbol): New prototype. (_bfd_mips_elf_relax_section): Likewise. (_bfd_mips16_elf_reloc_unshuffle): Rename to... (_bfd_mips_elf_reloc_unshuffle): ... this. Handle microMIPS ASE. (_bfd_mips16_elf_reloc_shuffle): Rename to... (_bfd_mips_elf_reloc_shuffle): ... this. Handle microMIPS ASE. (gprel16_reloc_p): Handle microMIPS ASE. (literal_reloc_p): New function. * elf32-mips.c (elf_micromips_howto_table_rel): New variable. (_bfd_mips_elf32_gprel16_reloc): Handle microMIPS ASE. (mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle and _bfd_mips_elf_reloc_shuffle changes. (mips_elf_gprel32_reloc): Update comment. (micromips_reloc_map): New variable. (bfd_elf32_bfd_reloc_type_lookup): Handle microMIPS ASE. (mips_elf32_rtype_to_howto): Likewise. (mips_info_to_howto_rel): Likewise. (bfd_elf32_bfd_is_target_special_symbol): Define. (bfd_elf32_bfd_relax_section): Likewise. * elf64-mips.c (micromips_elf64_howto_table_rel): New variable. (micromips_elf64_howto_table_rela): Likewise. (mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle and _bfd_mips_elf_reloc_shuffle changes. (micromips_reloc_map): Likewise. (bfd_elf64_bfd_reloc_type_lookup): Handle microMIPS ASE. (bfd_elf64_bfd_reloc_name_lookup): Likewise. (mips_elf64_rtype_to_howto): Likewise. (bfd_elf64_bfd_is_target_special_symbol): Define. * elfn32-mips.c (elf_micromips_howto_table_rel): New variable. (elf_micromips_howto_table_rela): Likewise. (mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle and _bfd_mips_elf_reloc_shuffle changes. (micromips_reloc_map): Likewise. (bfd_elf32_bfd_reloc_type_lookup): Handle microMIPS ASE. (bfd_elf32_bfd_reloc_name_lookup): Likewise. (mips_elf_n32_rtype_to_howto): Likewise. (bfd_elf32_bfd_is_target_special_symbol): Define. * elfxx-mips.c (LA25_LUI_MICROMIPS_1): New macro. (LA25_LUI_MICROMIPS_2): Likewise. (LA25_J_MICROMIPS_1, LA25_J_MICROMIPS_2): Likewise. (LA25_ADDIU_MICROMIPS_1, LA25_ADDIU_MICROMIPS_2): Likewise. (TLS_RELOC_P): Handle microMIPS ASE. (mips_elf_create_stub_symbol): Adjust value of stub symbol if target is a microMIPS function. (micromips_reloc_p): New function. (micromips_reloc_shuffle_p): Likewise. (got16_reloc_p, call16_reloc_p): Handle microMIPS ASE. (got_disp_reloc_p, got_page_reloc_p): New functions. (got_ofst_reloc_p): Likewise. (got_hi16_reloc_p, got_lo16_reloc_p): Likewise. (call_hi16_reloc_p, call_lo16_reloc_p): Likewise. (hi16_reloc_p, lo16_reloc_p, jal_reloc_p): Handle microMIPS ASE. (micromips_branch_reloc_p): New function. (tls_gd_reloc_p, tls_ldm_reloc_p): Likewise. (tls_gottprel_reloc_p): Likewise. (_bfd_mips16_elf_reloc_unshuffle): Rename to... (_bfd_mips_elf_reloc_unshuffle): ... this. Handle microMIPS ASE. (_bfd_mips16_elf_reloc_shuffle): Rename to... (_bfd_mips_elf_reloc_shuffle): ... this. Handle microMIPS ASE. (_bfd_mips_elf_lo16_reloc): Handle microMIPS ASE. (mips_tls_got_index, mips_elf_got_page): Likewise. (mips_elf_create_local_got_entry): Likewise. (mips_elf_relocation_needs_la25_stub): Likewise. (mips_elf_calculate_relocation): Likewise. (mips_elf_perform_relocation): Likewise. (_bfd_mips_elf_symbol_processing): Likewise. (_bfd_mips_elf_add_symbol_hook): Likewise. (_bfd_mips_elf_link_output_symbol_hook): Likewise. (mips_elf_add_lo16_rel_addend): Likewise. (_bfd_mips_elf_check_relocs): Likewise. (mips_elf_adjust_addend): Likewise. (_bfd_mips_elf_relocate_section): Likewise. (mips_elf_create_la25_stub): Likewise. (_bfd_mips_vxworks_finish_dynamic_symbol): Likewise. (_bfd_mips_elf_gc_sweep_hook): Likewise. (_bfd_mips_elf_is_target_special_symbol): New function. (mips_elf_relax_delete_bytes): Likewise. (opcode_descriptor): New structure. (RA): New macro. (OP32_SREG, OP32_TREG, OP16_VALID_REG): Likewise. (b_insns_32, bc_insn_32, bz_insn_32, bzal_insn_32): New variables. (beq_insn_32): Likewise. (b_insn_16, bz_insn_16): New variables. (BZC32_REG_FIELD): New macro. (bz_rs_insns_32, bz_rt_insns_32): New variables. (bzc_insns_32, bz_insns_16):Likewise. (BZ16_REG, BZ16_REG_FIELD): New macros. (jal_insn_32_bd16, jal_insn_32_bd32): New variables. (jal_x_insn_32_bd32): Likewise. (j_insn_32, jalr_insn_32): Likewise. (ds_insns_32_bd16, ds_insns_32_bd32): Likewise. (jalr_insn_16_bd16, jalr_insn_16_bd32, jr_insn_16): Likewise. (JR16_REG): New macro. (ds_insns_16_bd16): New variable. (lui_insn): Likewise. (addiu_insn, addiupc_insn): Likewise. (ADDIUPC_REG_FIELD): New macro. (MOVE32_RD, MOVE32_RS): Likewise. (MOVE16_RD_FIELD, MOVE16_RS_FIELD): Likewise. (move_insns_32, move_insns_16): New variables. (nop_insn_32, nop_insn_16): Likewise. (MATCH): New macro. (find_match): New function. (check_br16_dslot, check_br32_dslot): Likewise. (check_br16, check_br32): Likewise. (IS_BITSIZE): New macro. (check_4byte_branch): New function. (_bfd_mips_elf_relax_section): Likewise. (_bfd_mips_elf_merge_private_bfd_data): Disallow linking MIPS16 and microMIPS modules together. (_bfd_mips_elf_print_private_bfd_data): Handle microMIPS ASE. * reloc.c (BFD_RELOC_MICROMIPS_7_PCREL_S1): New relocation. (BFD_RELOC_MICROMIPS_10_PCREL_S1): Likewise. (BFD_RELOC_MICROMIPS_16_PCREL_S1): Likewise. (BFD_RELOC_MICROMIPS_GPREL16): Likewise. (BFD_RELOC_MICROMIPS_JMP, BFD_RELOC_MICROMIPS_HI16): Likewise. (BFD_RELOC_MICROMIPS_HI16_S): Likewise. (BFD_RELOC_MICROMIPS_LO16): Likewise. (BFD_RELOC_MICROMIPS_LITERAL): Likewise. (BFD_RELOC_MICROMIPS_GOT16): Likewise. (BFD_RELOC_MICROMIPS_CALL16): Likewise. (BFD_RELOC_MICROMIPS_GOT_HI16): Likewise. (BFD_RELOC_MICROMIPS_GOT_LO16): Likewise. (BFD_RELOC_MICROMIPS_CALL_HI16): Likewise. (BFD_RELOC_MICROMIPS_CALL_LO16): Likewise. (BFD_RELOC_MICROMIPS_SUB): Likewise. (BFD_RELOC_MICROMIPS_GOT_PAGE): Likewise. (BFD_RELOC_MICROMIPS_GOT_OFST): Likewise. (BFD_RELOC_MICROMIPS_GOT_DISP): Likewise. (BFD_RELOC_MICROMIPS_HIGHEST): Likewise. (BFD_RELOC_MICROMIPS_HIGHER): Likewise. (BFD_RELOC_MICROMIPS_SCN_DISP): Likewise. (BFD_RELOC_MICROMIPS_JALR): Likewise. (BFD_RELOC_MICROMIPS_TLS_GD): Likewise. (BFD_RELOC_MICROMIPS_TLS_LDM): Likewise. (BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16): Likewise. (BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16): Likewise. (BFD_RELOC_MICROMIPS_TLS_GOTTPREL): Likewise. (BFD_RELOC_MICROMIPS_TLS_TPREL_HI16): Likewise. (BFD_RELOC_MICROMIPS_TLS_TPREL_LO16): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. binutils/ 2011-02-25 Chao-ying Fu <fu@mips.com> Maciej W. Rozycki <macro@codesourcery.com> * readelf.c (get_machine_flags): Handle microMIPS ASE. (get_mips_symbol_other): Likewise. gas/ 2011-02-25 Maciej W. Rozycki <macro@codesourcery.com> Chao-ying Fu <fu@mips.com> Richard Sandiford <rdsandiford@googlemail.com> * config/tc-mips.h (mips_segment_info): Add one bit for microMIPS. (TC_LABEL_IS_LOCAL): New macro. (mips_label_is_local): New prototype. * config/tc-mips.c (S0, S7): New macros. (emit_branch_likely_macro): New variable. (mips_set_options): Add micromips. (mips_opts): Initialise micromips to -1. (file_ase_micromips): New variable. (CPU_HAS_MICROMIPS): New macro. (hilo_interlocks): Set for microMIPS too. (gpr_interlocks): Likewise. (cop_interlocks): Likewise. (cop_mem_interlocks): Likewise. (HAVE_CODE_COMPRESSION): New macro. (micromips_op_hash): New variable. (micromips_nop16_insn, micromips_nop32_insn): New variables. (NOP_INSN): Handle microMIPS ASE. (mips32_to_micromips_reg_b_map): New macro. (mips32_to_micromips_reg_c_map): Likewise. (mips32_to_micromips_reg_d_map): Likewise. (mips32_to_micromips_reg_e_map): Likewise. (mips32_to_micromips_reg_f_map): Likewise. (mips32_to_micromips_reg_g_map): Likewise. (mips32_to_micromips_reg_l_map): Likewise. (mips32_to_micromips_reg_n_map): Likewise. (mips32_to_micromips_reg_h_map): New variable. (mips32_to_micromips_reg_m_map): Likewise. (mips32_to_micromips_reg_q_map): Likewise. (micromips_to_32_reg_h_map): New variable. (micromips_to_32_reg_i_map): Likewise. (micromips_to_32_reg_m_map): Likewise. (micromips_to_32_reg_q_map): Likewise. (micromips_to_32_reg_b_map): New macro. (micromips_to_32_reg_c_map): Likewise. (micromips_to_32_reg_d_map): Likewise. (micromips_to_32_reg_e_map): Likewise. (micromips_to_32_reg_f_map): Likewise. (micromips_to_32_reg_g_map): Likewise. (micromips_to_32_reg_l_map): Likewise. (micromips_to_32_reg_n_map): Likewise. (micromips_imm_b_map, micromips_imm_c_map): New macros. (RELAX_DELAY_SLOT_16BIT): New macro. (RELAX_DELAY_SLOT_SIZE_FIRST): Likewise. (RELAX_DELAY_SLOT_SIZE_SECOND): Likewise. (RELAX_MICROMIPS_ENCODE, RELAX_MICROMIPS_P): New macros. (RELAX_MICROMIPS_TYPE, RELAX_MICROMIPS_AT): Likewise. (RELAX_MICROMIPS_U16BIT, RELAX_MICROMIPS_UNCOND): Likewise. (RELAX_MICROMIPS_COMPACT, RELAX_MICROMIPS_LINK): Likewise. (RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16): Likewise. (RELAX_MICROMIPS_MARK_TOOFAR16): Likewise. (RELAX_MICROMIPS_CLEAR_TOOFAR16): Likewise. (RELAX_MICROMIPS_TOOFAR32): Likewise. (RELAX_MICROMIPS_MARK_TOOFAR32): Likewise. (RELAX_MICROMIPS_CLEAR_TOOFAR32): Likewise. (INSERT_OPERAND, EXTRACT_OPERAND): Handle microMIPS ASE. (mips_macro_warning): Add delay_slot_16bit_p, delay_slot_32bit_p, fsize and insns. (mips_mark_labels): New function. (mips16_small, mips16_ext): Remove variables, replacing with... (forced_insn_size): ... this. (append_insn, mips16_ip): Update accordingly. (micromips_insn_length): New function. (insn_length): Return the length of microMIPS instructions. (mips_record_mips16_mode): Rename to... (mips_record_compressed_mode): ... this. Handle microMIPS ASE. (install_insn): Handle microMIPS ASE. (reglist_lookup): New function. (is_size_valid, is_delay_slot_valid): Likewise. (md_begin): Handle microMIPS ASE. (md_assemble): Likewise. Update for append_insn interface change. (micromips_reloc_p): New function. (got16_reloc_p): Handle microMIPS ASE. (hi16_reloc_p): Likewise. (lo16_reloc_p): Likewise. (jmp_reloc_p): New function. (jalr_reloc_p): Likewise. (matching_lo_reloc): Handle microMIPS ASE. (insn_uses_reg, reg_needs_delay): Likewise. (mips_move_labels): Likewise. (mips16_mark_labels): Rename to... (mips_compressed_mark_labels): ... this. Handle microMIPS ASE. (gpr_mod_mask): New function. (gpr_read_mask, gpr_write_mask): Handle microMIPS ASE. (fpr_read_mask, fpr_write_mask): Likewise. (insns_between, nops_for_vr4130, nops_for_insn): Likewise. (fix_loongson2f_nop, fix_loongson2f_jump): Likewise. (MICROMIPS_LABEL_CHAR): New macro. (micromips_target_label, micromips_target_name): New variables. (micromips_label_name, micromips_label_expr): New functions. (micromips_label_inc, micromips_add_label): Likewise. (mips_label_is_local): Likewise. (micromips_map_reloc): Likewise. (can_swap_branch_p): Handle microMIPS ASE. (append_insn): Add expansionp argument. Handle microMIPS ASE. (start_noreorder, end_noreorder): Handle microMIPS ASE. (macro_start, macro_warning, macro_end): Likewise. (brk_fmt, cop12_fmt, jalr_fmt, lui_fmt): New variables. (mem12_fmt, mfhl_fmt, shft_fmt, trap_fmt): Likewise. (BRK_FMT, COP12_FMT, JALR_FMT, LUI_FMT): New macros. (MEM12_FMT, MFHL_FMT, SHFT_FMT, TRAP_FMT): Likewise. (macro_build): Handle microMIPS ASE. Update for append_insn interface change. (mips16_macro_build): Update for append_insn interface change. (macro_build_jalr): Handle microMIPS ASE. (macro_build_lui): Likewise. Simplify. (load_register): Handle microMIPS ASE. (load_address): Likewise. (move_register): Likewise. (macro_build_branch_likely): New function. (macro_build_branch_ccl): Likewise. (macro_build_branch_rs): Likewise. (macro_build_branch_rsrt): Likewise. (macro): Handle microMIPS ASE. (validate_micromips_insn): New function. (expr_const_in_range): Likewise. (mips_ip): Handle microMIPS ASE. (options): Add OPTION_MICROMIPS and OPTION_NO_MICROMIPS. (md_longopts): Add mmicromips and mno-micromips. (md_parse_option): Handle OPTION_MICROMIPS and OPTION_NO_MICROMIPS. (mips_after_parse_args): Handle microMIPS ASE. (md_pcrel_from): Handle microMIPS relocations. (mips_force_relocation): Likewise. (md_apply_fix): Likewise. (mips_align): Handle microMIPS ASE. (s_mipsset): Likewise. (s_cpload, s_cpsetup, s_cpreturn): Use relocation wrappers. (s_dtprel_internal): Likewise. (s_gpword, s_gpdword): Likewise. (s_insn): Handle microMIPS ASE. (s_mips_stab): Likewise. (relaxed_micromips_32bit_branch_length): New function. (relaxed_micromips_16bit_branch_length): New function. (md_estimate_size_before_relax): Handle microMIPS ASE. (mips_fix_adjustable): Likewise. (tc_gen_reloc): Handle microMIPS relocations. (mips_relax_frag): Handle microMIPS ASE. (md_convert_frag): Likewise. (mips_frob_file_after_relocs): Likewise. (mips_elf_final_processing): Likewise. (mips_nop_opcode): Likewise. (mips_handle_align): Likewise. (md_show_usage): Handle microMIPS options. * symbols.c (TC_LABEL_IS_LOCAL): New macro. (S_IS_LOCAL): Add a TC_LABEL_IS_LOCAL check. * doc/as.texinfo (Target MIPS options): Add -mmicromips and -mno-micromips. (-mmicromips, -mno-micromips): New options. * doc/c-mips.texi (-mmicromips, -mno-micromips): New options. (MIPS ISA): Document .set micromips and .set nomicromips. (MIPS insn): Update for microMIPS support. gas/testsuite/ 2011-02-25 Maciej W. Rozycki <macro@codesourcery.com> Chao-ying Fu <fu@mips.com> Richard Sandiford <rdsandiford@googlemail.com> * gas/mips/micromips.d: New test. * gas/mips/micromips-branch-delay.d: Likewise. * gas/mips/micromips-branch-relax.d: Likewise. * gas/mips/micromips-branch-relax-pic.d: Likewise. * gas/mips/micromips-size-1.d: Likewise. * gas/mips/micromips-trap.d: Likewise. * gas/mips/micromips.l: New stderr output. * gas/mips/micromips-branch-delay.l: Likewise. * gas/mips/micromips-branch-relax.l: Likewise. * gas/mips/micromips-branch-relax-pic.l: Likewise. * gas/mips/micromips-size-0.l: New list test. * gas/mips/micromips-size-1.l: New stderr output. * gas/mips/micromips.s: New test source. * gas/mips/micromips-branch-delay.s: Likewise. * gas/mips/micromips-branch-relax.s: Likewise. * gas/mips/micromips-size-0.s: Likewise. * gas/mips/micromips-size-1.s: Likewise. * gas/mips/mips.exp: Run the new tests. * gas/mips/dli.s: Use .p2align. * gas/mips/elf_ase_micromips.d: New test. * gas/mips/elf_ase_micromips-2.d: Likewise. * gas/mips/micromips@abs.d: Likewise. * gas/mips/micromips@add.d: Likewise. * gas/mips/micromips@alnv_ps-swap.d: Likewise. * gas/mips/micromips@and.d: Likewise. * gas/mips/micromips@beq.d: Likewise. * gas/mips/micromips@bge.d: Likewise. * gas/mips/micromips@bgeu.d: Likewise. * gas/mips/micromips@blt.d: Likewise. * gas/mips/micromips@bltu.d: Likewise. * gas/mips/micromips@branch-likely.d: Likewise. * gas/mips/micromips@branch-misc-1.d: Likewise. * gas/mips/micromips@branch-misc-2-64.d: Likewise. * gas/mips/micromips@branch-misc-2.d: Likewise. * gas/mips/micromips@branch-misc-2pic-64.d: Likewise. * gas/mips/micromips@branch-misc-2pic.d: Likewise. * gas/mips/micromips@branch-misc-4-64.d: Likewise. * gas/mips/micromips@branch-misc-4.d: Likewise. * gas/mips/micromips@branch-self.d: Likewise. * gas/mips/micromips@cache.d: Likewise. * gas/mips/micromips@daddi.d: Likewise. * gas/mips/micromips@dli.d: Likewise. * gas/mips/micromips@elf-jal.d: Likewise. * gas/mips/micromips@elf-rel2.d: Likewise. * gas/mips/micromips@elfel-rel2.d: Likewise. * gas/mips/micromips@elf-rel4.d: Likewise. * gas/mips/micromips@jal-svr4pic.d: Likewise. * gas/mips/micromips@jal-svr4pic-noreorder.d: Likewise. * gas/mips/micromips@lb-svr4pic-ilocks.d: Likewise. * gas/mips/micromips@li.d: Likewise. * gas/mips/micromips@loc-swap-dis.d: Likewise. * gas/mips/micromips@loc-swap.d: Likewise. * gas/mips/micromips@mips1-fp.d: Likewise. * gas/mips/micromips@mips32-cp2.d: Likewise. * gas/mips/micromips@mips32-imm.d: Likewise. * gas/mips/micromips@mips32-sf32.d: Likewise. * gas/mips/micromips@mips32.d: Likewise. * gas/mips/micromips@mips32r2-cp2.d: Likewise. * gas/mips/micromips@mips32r2-fp32.d: Likewise. * gas/mips/micromips@mips32r2-sync.d: Likewise. * gas/mips/micromips@mips32r2.d: Likewise. * gas/mips/micromips@mips4-branch-likely.d: Likewise. * gas/mips/micromips@mips4-fp.d: Likewise. * gas/mips/micromips@mips4.d: Likewise. * gas/mips/micromips@mips5.d: Likewise. * gas/mips/micromips@mips64-cp2.d: Likewise. * gas/mips/micromips@mips64.d: Likewise. * gas/mips/micromips@mips64r2.d: Likewise. * gas/mips/micromips@pref.d: Likewise. * gas/mips/micromips@relax-at.d: Likewise. * gas/mips/micromips@relax.d: Likewise. * gas/mips/micromips@rol-hw.d: Likewise. * gas/mips/micromips@uld2-eb.d: Likewise. * gas/mips/micromips@uld2-el.d: Likewise. * gas/mips/micromips@ulh2-eb.d: Likewise. * gas/mips/micromips@ulh2-el.d: Likewise. * gas/mips/micromips@ulw2-eb-ilocks.d: Likewise. * gas/mips/micromips@ulw2-el-ilocks.d: Likewise. * gas/mips/cache.d: Likewise. * gas/mips/daddi.d: Likewise. * gas/mips/mips32-imm.d: Likewise. * gas/mips/pref.d: Likewise. * gas/mips/elf-rel27.d: Handle microMIPS ASE. * gas/mips/l_d.d: Likewise. * gas/mips/l_d-n32.d: Likewise. * gas/mips/l_d-n64.d: Likewise. * gas/mips/ld.d: Likewise. * gas/mips/ld-n32.d: Likewise. * gas/mips/ld-n64.d: Likewise. * gas/mips/s_d.d: Likewise. * gas/mips/s_d-n32.d: Likewise. * gas/mips/s_d-n64.d: Likewise. * gas/mips/sd.d: Likewise. * gas/mips/sd-n32.d: Likewise. * gas/mips/sd-n64.d: Likewise. * gas/mips/mips32.d: Update immediates. * gas/mips/micromips@mips32-cp2.s: New test source. * gas/mips/micromips@mips32-imm.s: Likewise. * gas/mips/micromips@mips32r2-cp2.s: Likewise. * gas/mips/micromips@mips64-cp2.s: Likewise. * gas/mips/cache.s: Likewise. * gas/mips/daddi.s: Likewise. * gas/mips/mips32-imm.s: Likewise. * gas/mips/elf-rel4.s: Handle microMIPS ASE. * gas/mips/lb-pic.s: Likewise. * gas/mips/ld.s: Likewise. * gas/mips/mips32.s: Likewise. * gas/mips/mips.exp: Add the micromips arch. Exclude mips16e from micromips. Run mips32-imm. * gas/mips/jal-mask-11.d: New test. * gas/mips/jal-mask-12.d: Likewise. * gas/mips/micromips@jal-mask-11.d: Likewise. * gas/mips/jal-mask-1.s: Source for the new tests. * gas/mips/jal-mask-21.d: New test. * gas/mips/jal-mask-22.d: Likewise. * gas/mips/micromips@jal-mask-12.d: Likewise. * gas/mips/jal-mask-2.s: Source for the new tests. * gas/mips/mips.exp: Run the new tests. * gas/mips/mips16-e.d: Add --special-syms to `objdump'. * gas/mips/tmips16-e.d: Likewise. * gas/mips/mipsel16-e.d: Likewise. * gas/mips/tmipsel16-e.d: Likewise. * gas/mips/and.s: Adjust padding. * gas/mips/beq.s: Likewise. * gas/mips/bge.s: Likewise. * gas/mips/bgeu.s: Likewise. * gas/mips/blt.s: Likewise. * gas/mips/bltu.s: Likewise. * gas/mips/branch-misc-2.s: Likewise. * gas/mips/jal.s: Likewise. * gas/mips/li.s: Likewise. * gas/mips/mips4.s: Likewise. * gas/mips/mips4-fp.s: Likewise. * gas/mips/relax.s: Likewise. * gas/mips/and.d: Update accordingly. * gas/mips/elf-jal.d: Likewise. * gas/mips/jal.d: Likewise. * gas/mips/li.d: Likewise. * gas/mips/relax-at.d: Likewise. * gas/mips/relax.d: Likewise. include/elf/ 2011-02-25 Chao-ying Fu <fu@mips.com> Maciej W. Rozycki <macro@codesourcery.com> * mips.h (R_MICROMIPS_min): New relocations. (R_MICROMIPS_26_S1): Likewise. (R_MICROMIPS_HI16, R_MICROMIPS_LO16): Likewise. (R_MICROMIPS_GPREL16, R_MICROMIPS_LITERAL): Likewise. (R_MICROMIPS_GOT16, R_MICROMIPS_PC7_S1): Likewise. (R_MICROMIPS_PC10_S1, R_MICROMIPS_PC16_S1): Likewise. (R_MICROMIPS_CALL16, R_MICROMIPS_GOT_DISP): Likewise. (R_MICROMIPS_GOT_PAGE, R_MICROMIPS_GOT_OFST): Likewise. (R_MICROMIPS_GOT_HI16, R_MICROMIPS_GOT_LO16): Likewise. (R_MICROMIPS_SUB, R_MICROMIPS_HIGHER): Likewise. (R_MICROMIPS_HIGHEST, R_MICROMIPS_CALL_HI16): Likewise. (R_MICROMIPS_CALL_LO16, R_MICROMIPS_SCN_DISP): Likewise. (R_MICROMIPS_JALR, R_MICROMIPS_HI0_LO16): Likewise. (R_MICROMIPS_TLS_GD, R_MICROMIPS_TLS_LDM): Likewise. (R_MICROMIPS_TLS_DTPREL_HI, R_MICROMIPS_TLS_DTPREL_LO): Likewise. (R_MICROMIPS_TLS_GOTTPREL): Likewise. (R_MICROMIPS_TLS_TPREL_HI16): Likewise. (R_MICROMIPS_TLS_TPREL_LO16): Likewise. (R_MICROMIPS_GPREL7_S2, R_MICROMIPS_PC23_S2): Likewise. (R_MICROMIPS_max): Likewise. (EF_MIPS_ARCH_ASE_MICROMIPS): New macro. (STO_MIPS_ISA, STO_MIPS_FLAGS): Likewise. (ELF_ST_IS_MIPS_PLT, ELF_ST_SET_MIPS_PLT): Likewise. (STO_MICROMIPS): Likewise. (ELF_ST_IS_MICROMIPS, ELF_ST_SET_MICROMIPS): Likewise. (ELF_ST_IS_COMPRESSED): Likewise. (STO_MIPS_PLT, STO_MIPS_PIC): Rework. (ELF_ST_IS_MIPS_PIC, ELF_ST_SET_MIPS_PIC): Likewise. (STO_MIPS16, ELF_ST_IS_MIPS16, ELF_ST_SET_MIPS16): Likewise. include/opcode/ 2011-02-25 Chao-ying Fu <fu@mips.com> Maciej W. Rozycki <macro@codesourcery.com> * mips.h (OP_MASK_EXTLSB, OP_SH_EXTLSB): New macros. (OP_MASK_STYPE, OP_SH_STYPE): Likewise. (OP_MASK_CODE10, OP_SH_CODE10): Likewise. (OP_MASK_TRAP, OP_SH_TRAP): Likewise. (OP_MASK_OFFSET12, OP_SH_OFFSET12): Likewise. (OP_MASK_OFFSET10, OP_SH_OFFSET10): Likewise. (OP_MASK_RS3, OP_SH_RS3): Likewise. (OP_MASK_MB, OP_SH_MB, OP_MASK_MC, OP_SH_MC): Likewise. (OP_MASK_MD, OP_SH_MD, OP_MASK_ME, OP_SH_ME): Likewise. (OP_MASK_MF, OP_SH_MF, OP_MASK_MG, OP_SH_MG): Likewise. (OP_MASK_MJ, OP_SH_MJ, OP_MASK_ML, OP_SH_ML): Likewise. (OP_MASK_MP, OP_SH_MP, OP_MASK_MQ, OP_SH_MQ): Likewise. (OP_MASK_IMMA, OP_SH_IMMA, OP_MASK_IMMB, OP_SH_IMMB): Likewise. (OP_MASK_IMMC, OP_SH_IMMC, OP_MASK_IMMF, OP_SH_IMMF): Likewise. (OP_MASK_IMMG, OP_SH_IMMG, OP_MASK_IMMH, OP_SH_IMMH): Likewise. (OP_MASK_IMMI, OP_SH_IMMI, OP_MASK_IMMJ, OP_SH_IMMJ): Likewise. (OP_MASK_IMML, OP_SH_IMML, OP_MASK_IMMM, OP_SH_IMMM): Likewise. (OP_MASK_IMMN, OP_SH_IMMN, OP_MASK_IMMO, OP_SH_IMMO): Likewise. (OP_MASK_IMMP, OP_SH_IMMP, OP_MASK_IMMQ, OP_SH_IMMQ): Likewise. (OP_MASK_IMMU, OP_SH_IMMU, OP_MASK_IMMW, OP_SH_IMMW): Likewise. (OP_MASK_IMMX, OP_SH_IMMX, OP_MASK_IMMY, OP_SH_IMMY): Likewise. (INSN_WRITE_GPR_S): New macro. (INSN2_BRANCH_DELAY_16BIT, INSN2_BRANCH_DELAY_32BIT): Likewise. (INSN2_READ_FPR_D): Likewise. (INSN2_MOD_GPR_MB, INSN2_MOD_GPR_MC): Likewise. (INSN2_MOD_GPR_MD, INSN2_MOD_GPR_ME): Likewise. (INSN2_MOD_GPR_MF, INSN2_MOD_GPR_MG): Likewise. (INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MP): Likewise. (INSN2_MOD_GPR_MQ, INSN2_MOD_SP): Likewise. (INSN2_READ_GPR_31, INSN2_READ_GP, INSN2_READ_PC): Likewise. (INSN2_UNCOND_BRANCH, INSN2_COND_BRANCH): Likewise. (INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MM, INSN2_MOD_GPR_MN): Likewise. (CPU_MICROMIPS): New macro. (M_BC1FL, M_BC1TL, M_BC2FL, M_BC2TL): New enum values. (M_BEQL, M_BGEZ, M_BGEZL, M_BGEZALL, M_BGTZ, M_BGTZL): Likewise. (M_BLEZ, M_BLEZL, M_BLTZ, M_BLTZL, M_BLTZALL, M_BNEL): Likewise. (M_CACHE_OB, M_JALS_1, M_JALS_2, M_JALS_A): Likewise. (M_LDC2_OB, M_LDL_OB, M_LDM_AB, M_LDM_OB): Likewise. (M_LDP_AB, M_LDP_OB, M_LDR_OB, M_LL_OB, M_LLD_OB): Likewise. (M_LWC2_OB, M_LWL_OB, M_LWM_AB, M_LWM_OB): Likewise. (M_LWP_AB, M_LWP_OB, M_LWR_OB): Likewise. (M_LWU_OB, M_PREF_OB, M_SC_OB, M_SCD_OB): Likewise. (M_SDC2_OB, M_SDL_OB, M_SDM_AB, M_SDM_OB): Likewise. (M_SDP_AB, M_SDP_OB, M_SDR_OB): Likewise. (M_SWC2_OB, M_SWL_OB, M_SWM_AB, M_SWM_OB): Likewise. (M_SWP_AB, M_SWP_OB, M_SWR_OB): Likewise. (MICROMIPSOP_MASK_MAJOR, MICROMIPSOP_SH_MAJOR): New macros. (MICROMIPSOP_MASK_IMMEDIATE, MICROMIPSOP_SH_IMMEDIATE): Likewise. (MICROMIPSOP_MASK_DELTA, MICROMIPSOP_SH_DELTA): Likewise. (MICROMIPSOP_MASK_CODE10, MICROMIPSOP_SH_CODE10): Likewise. (MICROMIPSOP_MASK_TRAP, MICROMIPSOP_SH_TRAP): Likewise. (MICROMIPSOP_MASK_SHAMT, MICROMIPSOP_SH_SHAMT): Likewise. (MICROMIPSOP_MASK_TARGET, MICROMIPSOP_SH_TARGET): Likewise. (MICROMIPSOP_MASK_EXTLSB, MICROMIPSOP_SH_EXTLSB): Likewise. (MICROMIPSOP_MASK_EXTMSBD, MICROMIPSOP_SH_EXTMSBD): Likewise. (MICROMIPSOP_MASK_INSMSB, MICROMIPSOP_SH_INSMSB): Likewise. (MICROMIPSOP_MASK_CODE, MICROMIPSOP_SH_CODE): Likewise. (MICROMIPSOP_MASK_CODE2, MICROMIPSOP_SH_CODE2): Likewise. (MICROMIPSOP_MASK_CACHE, MICROMIPSOP_SH_CACHE): Likewise. (MICROMIPSOP_MASK_SEL, MICROMIPSOP_SH_SEL): Likewise. (MICROMIPSOP_MASK_OFFSET12, MICROMIPSOP_SH_OFFSET12): Likewise. (MICROMIPSOP_MASK_3BITPOS, MICROMIPSOP_SH_3BITPOS): Likewise. (MICROMIPSOP_MASK_STYPE, MICROMIPSOP_SH_STYPE): Likewise. (MICROMIPSOP_MASK_OFFSET10, MICROMIPSOP_SH_OFFSET10): Likewise. (MICROMIPSOP_MASK_RS, MICROMIPSOP_SH_RS): Likewise. (MICROMIPSOP_MASK_RT, MICROMIPSOP_SH_RT): Likewise. (MICROMIPSOP_MASK_RD, MICROMIPSOP_SH_RD): Likewise. (MICROMIPSOP_MASK_FS, MICROMIPSOP_SH_FS): Likewise. (MICROMIPSOP_MASK_FT, MICROMIPSOP_SH_FT): Likewise. (MICROMIPSOP_MASK_FD, MICROMIPSOP_SH_FD): Likewise. (MICROMIPSOP_MASK_FR, MICROMIPSOP_SH_FR): Likewise. (MICROMIPSOP_MASK_RS3, MICROMIPSOP_SH_RS3): Likewise. (MICROMIPSOP_MASK_PREFX, MICROMIPSOP_SH_PREFX): Likewise. (MICROMIPSOP_MASK_BCC, MICROMIPSOP_SH_BCC): Likewise. (MICROMIPSOP_MASK_CCC, MICROMIPSOP_SH_CCC): Likewise. (MICROMIPSOP_MASK_COPZ, MICROMIPSOP_SH_COPZ): Likewise. (MICROMIPSOP_MASK_MB, MICROMIPSOP_SH_MB): Likewise. (MICROMIPSOP_MASK_MC, MICROMIPSOP_SH_MC): Likewise. (MICROMIPSOP_MASK_MD, MICROMIPSOP_SH_MD): Likewise. (MICROMIPSOP_MASK_ME, MICROMIPSOP_SH_ME): Likewise. (MICROMIPSOP_MASK_MF, MICROMIPSOP_SH_MF): Likewise. (MICROMIPSOP_MASK_MG, MICROMIPSOP_SH_MG): Likewise. (MICROMIPSOP_MASK_MH, MICROMIPSOP_SH_MH): Likewise. (MICROMIPSOP_MASK_MI, MICROMIPSOP_SH_MI): Likewise. (MICROMIPSOP_MASK_MJ, MICROMIPSOP_SH_MJ): Likewise. (MICROMIPSOP_MASK_ML, MICROMIPSOP_SH_ML): Likewise. (MICROMIPSOP_MASK_MM, MICROMIPSOP_SH_MM): Likewise. (MICROMIPSOP_MASK_MN, MICROMIPSOP_SH_MN): Likewise. (MICROMIPSOP_MASK_MP, MICROMIPSOP_SH_MP): Likewise. (MICROMIPSOP_MASK_MQ, MICROMIPSOP_SH_MQ): Likewise. (MICROMIPSOP_MASK_IMMA, MICROMIPSOP_SH_IMMA): Likewise. (MICROMIPSOP_MASK_IMMB, MICROMIPSOP_SH_IMMB): Likewise. (MICROMIPSOP_MASK_IMMC, MICROMIPSOP_SH_IMMC): Likewise. (MICROMIPSOP_MASK_IMMD, MICROMIPSOP_SH_IMMD): Likewise. (MICROMIPSOP_MASK_IMME, MICROMIPSOP_SH_IMME): Likewise. (MICROMIPSOP_MASK_IMMF, MICROMIPSOP_SH_IMMF): Likewise. (MICROMIPSOP_MASK_IMMG, MICROMIPSOP_SH_IMMG): Likewise. (MICROMIPSOP_MASK_IMMH, MICROMIPSOP_SH_IMMH): Likewise. (MICROMIPSOP_MASK_IMMI, MICROMIPSOP_SH_IMMI): Likewise. (MICROMIPSOP_MASK_IMMJ, MICROMIPSOP_SH_IMMJ): Likewise. (MICROMIPSOP_MASK_IMML, MICROMIPSOP_SH_IMML): Likewise. (MICROMIPSOP_MASK_IMMM, MICROMIPSOP_SH_IMMM): Likewise. (MICROMIPSOP_MASK_IMMN, MICROMIPSOP_SH_IMMN): Likewise. (MICROMIPSOP_MASK_IMMO, MICROMIPSOP_SH_IMMO): Likewise. (MICROMIPSOP_MASK_IMMP, MICROMIPSOP_SH_IMMP): Likewise. (MICROMIPSOP_MASK_IMMQ, MICROMIPSOP_SH_IMMQ): Likewise. (MICROMIPSOP_MASK_IMMU, MICROMIPSOP_SH_IMMU): Likewise. (MICROMIPSOP_MASK_IMMW, MICROMIPSOP_SH_IMMW): Likewise. (MICROMIPSOP_MASK_IMMX, MICROMIPSOP_SH_IMMX): Likewise. (MICROMIPSOP_MASK_IMMY, MICROMIPSOP_SH_IMMY): Likewise. (MICROMIPSOP_MASK_CODE, MICROMIPSOP_SH_CODE): Likewise. (MICROMIPSOP_MASK_CODE2, MICROMIPSOP_SH_CODE2): Likewise. (MICROMIPSOP_MASK_CACHE, MICROMIPSOP_SH_CACHE): Likewise. (MICROMIPSOP_MASK_CODE20, MICROMIPSOP_SH_CODE20): Likewise. (MICROMIPSOP_MASK_PERFREG, MICROMIPSOP_SH_PERFREG): Likewise. (MICROMIPSOP_MASK_CODE19, MICROMIPSOP_SH_CODE19): Likewise. (MICROMIPSOP_MASK_ALN, MICROMIPSOP_SH_ALN): Likewise. (MICROMIPSOP_MASK_VECBYTE, MICROMIPSOP_SH_VECBYTE): Likewise. (MICROMIPSOP_MASK_VECALIGN, MICROMIPSOP_SH_VECALIGN): Likewise. (MICROMIPSOP_MASK_DSPACC, MICROMIPSOP_SH_DSPACC): Likewise. (MICROMIPSOP_MASK_DSPACC_S, MICROMIPSOP_SH_DSPACC_S): Likewise. (MICROMIPSOP_MASK_DSPSFT, MICROMIPSOP_SH_DSPSFT): Likewise. (MICROMIPSOP_MASK_DSPSFT_7, MICROMIPSOP_SH_DSPSFT_7): Likewise. (MICROMIPSOP_MASK_SA3, MICROMIPSOP_SH_SA3): Likewise. (MICROMIPSOP_MASK_SA4, MICROMIPSOP_SH_SA4): Likewise. (MICROMIPSOP_MASK_IMM8, MICROMIPSOP_SH_IMM8): Likewise. (MICROMIPSOP_MASK_IMM10, MICROMIPSOP_SH_IMM10): Likewise. (MICROMIPSOP_MASK_WRDSP, MICROMIPSOP_SH_WRDSP): Likewise. (MICROMIPSOP_MASK_RDDSP, MICROMIPSOP_SH_RDDSP): Likewise. (MICROMIPSOP_MASK_BP, MICROMIPSOP_SH_BP): Likewise. (MICROMIPSOP_MASK_MT_U, MICROMIPSOP_SH_MT_U): Likewise. (MICROMIPSOP_MASK_MT_H, MICROMIPSOP_SH_MT_H): Likewise. (MICROMIPSOP_MASK_MTACC_T, MICROMIPSOP_SH_MTACC_T): Likewise. (MICROMIPSOP_MASK_MTACC_D, MICROMIPSOP_SH_MTACC_D): Likewise. (MICROMIPSOP_MASK_BBITIND, MICROMIPSOP_SH_BBITIND): Likewise. (MICROMIPSOP_MASK_CINSPOS, MICROMIPSOP_SH_CINSPOS): Likewise. (MICROMIPSOP_MASK_CINSLM1, MICROMIPSOP_SH_CINSLM1): Likewise. (MICROMIPSOP_MASK_SEQI, MICROMIPSOP_SH_SEQI): Likewise. (micromips_opcodes): New declaration. (bfd_micromips_num_opcodes): Likewise. ld/testsuite/ 2011-02-25 Catherine Moore <clm@codesourcery.com> Chao-ying Fu <fu@mips.com> Maciej W. Rozycki <macro@codesourcery.com> * lib/ld-lib.exp (run_dump_test): Support distinct assembler flags for the same source named multiple times. * ld-mips-elf/jalx-1.s: New test source. * ld-mips-elf/jalx-1.d: New test output. * ld-mips-elf/jalx-1.ld: New test linker script. * ld-mips-elf/jalx-2-main.s: New test source. * ld-mips-elf/jalx-2-ex.s: Likewise. * ld-mips-elf/jalx-2-printf.s: Likewise. * ld-mips-elf/jalx-2.dd: New test output. * ld-mips-elf/jalx-2.ld: New test linker script. * ld-mips-elf/mips16-and-micromips.d: New test. * ld-mips-elf/mips-elf.exp: Run the new tests opcodes/ 2011-02-25 Chao-ying Fu <fu@mips.com> Maciej W. Rozycki <macro@codesourcery.com> * micromips-opc.c: New file. * mips-dis.c (micromips_to_32_reg_b_map): New array. (micromips_to_32_reg_c_map, micromips_to_32_reg_d_map): Likewise. (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map): Likewise. (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map): Likewise. (micromips_to_32_reg_q_map): Likewise. (micromips_imm_b_map, micromips_imm_c_map): Likewise. (micromips_ase): New variable. (is_micromips): New function. (set_default_mips_dis_options): Handle microMIPS ASE. (print_insn_micromips): New function. (is_compressed_mode_p): Likewise. (_print_insn_mips): Handle microMIPS instructions. * Makefile.am (CFILES): Add micromips-opc.c. * configure.in (bfd_mips_arch): Add micromips-opc.lo. * Makefile.in: Regenerate. * configure: Regenerate. * mips-dis.c (micromips_to_32_reg_h_map): New variable. (micromips_to_32_reg_i_map): Likewise. (micromips_to_32_reg_m_map): Likewise. (micromips_to_32_reg_n_map): New macro.
2010-11-11 bfd/Nick Clifton1-0/+1
* archures.c (bfd_mach_mips_loongson_3a): Defined. * bfd-in2.h (bfd_mach_mips_loongson_3a): Defined. * cpu-mips.c (I_loongson_3a): New add. (arch_info_struct): Add loongson_3a. * elfxx-mips.c (_bfd_elf_mips_mach): Add loongson_3a. (mips_set_isa_flags): Add loongson_3a. (mips_mach_extensions): Add loongson_3a in MIPS64 extensions. binutils/ * readelf.c (get_machine_flags): Add loongson-3a. gas/ * config/tc-mips.c (mips_cpu_info_table): Add loongson3a in MIPS 64. * doc/c-mips.texi (MIPS cpu): Add loongson3a. include/ * elf/mips.h (E_MIPS_MACH_LS3A): Defined. * opcode/mips.h (INSN_LOONGSON_3A): Defined. (CPU_LOONGSON_3A): Defined. (OPCODE_IS_MEMBER): Add LOONGSON_3A. opcodes/ * mips-dis.c (mips_arch_choices): Add loongson3a. * mips-opc.c (IL3A): Defined as INSN_LOONGSON_3A. (mips_builtin_opcodes): Modify some instructions' membership from IL2F to IL2F|IL3A, since these instructions are supported by Loongson_3A.
2010-04-15Upgrade header files to use GPLv3Nick Clifton1-13/+14
2009-12-03include/David Daney1-0/+1
2009-12-03 David Daney <ddaney@caviumnetworks.com> Adam Nemet <adambnemet@gmail.com> * elf/mips.h (E_MIPS_MACH_OCTEON2): New machine flag. binutils/ 2009-12-03 David Daney <ddaney@caviumnetworks.com> Adam Nemet <adambnemet@gmail.com> * readelf.c (get_machine_flags): Handle E_MIPS_MACH_OCTEON2 case.
2009-09-02update copyright datesAlan Modra1-1/+1
2009-02-03bfd:Joseph Myers1-0/+1
2009-02-03 Sandip Matte <sandip@rmicorp.com> * aoutx.h (NAME (aout, machine_type)): Handle bfd_mach_mips_xlr. * archures.c (bfd_mach_mips_xlr): Define. * bfd-in2.h: Regenerate. * cpu-mips.c (I_xlr): Define. (arch_info_struct): Add XLR entry. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_XLR. (mips_set_isa_flags): Handle bfd_mach_mips_xlr (mips_mach_extensions): Add XLR entry. binutils: 2009-02-03 Sandip Matte <sandip@rmicorp.com> * readelf.c (get_machine_flags): Handle E_MIPS_MACH_XLR. gas: 2009-02-03 Sandip Matte <sandip@rmicorp.com> * config/tc-mips.c (macro): Handle M_MSGSND, M_MSGLD, M_MSGLD_T, M_MSGWAIT and M_MSGWAIT_T. (mips_cpu_info_table): Add XLR entry. * doc/c-mips.texi (-march): Document xlr. gas/testsuite: 2009-02-03 Sandip Matte <sandip@rmicorp.com> * gas/mips/mips.exp (xlr): New architecture. (xlr-ext): Run test. * gas/mips/xlr-ext.d, gas/mips/xlr-ext.s: New. include/elf: 2009-02-03 Sandip Matte <sandip@rmicorp.com> * mips.h (E_MIPS_MACH_XLR): Define. include/opcode: 2009-02-03 Sandip Matte <sandip@rmicorp.com> * mips.h (INSN_XLR): Define. (INSN_CHIP_MASK): Update. (CPU_XLR): Define. (OPCODE_IS_MEMBER): Update. (M_MSGSND, M_MSGLD, M_MSGLD_T, M_MSGWAIT, M_MSGWAIT_T): Define. opcodes: 2009-02-03 Sandip Matte <sandip@rmicorp.com> * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define. (mips_arch_choices): Add XLR entry. * mips-opc.c (XLR): Define. (mips_builtin_opcodes): Add XLR instructions.
2008-08-082008-08-08 Richard Sandiford <rdsandiford@googlemail.com>Daniel Jacobowitz1-0/+20
Daniel Jacobowitz <dan@codesourcery.com> Catherine Moore <clm@codesourcery.com> Mark Shinwell <shinwell@codesourcery.com> Maxim Kuvyrkov <maxim@codesourcery.com> * elf32-mips.c (mips_vxworks_copy_howto_rela): Replace with... (elf_mips_copy_howto): ...this howto. Clear the size fields. (mips_vxworks_jump_slot_howto_rela): Replace with... (elf_mips_jump_slot_howto): ...this howto. (bfd_elf32_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY and BFD_RELOC_MIPS_JUMP_SLOT. (bfd_elf32_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and "R_MIPS_JUMP_SLOT". (mips_elf32_rtype_to_howto): Handle R_MIPS_COPY and R_MIPS_JUMP_SLOT. (elf_backend_plt_readonly): Define. (elf_backend_plt_sym_val): Define for non-VxWorks targets. (mips_vxworks_bfd_reloc_type_lookup): Delete. (mips_vxworks_bfd_reloc_name_lookup): Likewise. (mips_vxworks_rtype_to_howto): Likewise. (elf_backend_want_dynbss): Don't define for VxWorks. (elf_backend_plt_readonly): Likewise. (bfd_elf32_bfd_reloc_type_lookup): Likewise. (bfd_elf32_bfd_reloc_name_lookup): Likewise. (elf_backend_mips_rtype_to_howto): Likewise. (elf_backend_adjust_dynamic_symbol): Likewise. (elf_backend_got_symbol_offset): Don't define. * elfn32-mips.c (elf_mips_copy_howto, elf_mips_jump_slot_howto): New. (bfd_elf32_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY and BFD_RELOC_MIPS_JUMP_SLOT. (bfd_elf32_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and "R_MIPS_JUMP_SLOT". (mips_elf32_n32_rtype_to_howto): Handle R_MIPS_COPY and R_MIPS_JUMP_SLOT. (elf_backend_rela_plts_and_copies_p, elf_backend_plt_readonly) (elf_backend_plt_sym_val): Define. * elf64-mips.c (elf_mips_copy_howto, elf_mips_jump_slot_howto): New. (bfd_elf64_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY and BFD_RELOC_MIPS_JUMP_SLOT. (bfd_elf64_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and "R_MIPS_JUMP_SLOT". (mips_elf64_rtype_to_howto): Handle R_MIPS_COPY and R_MIPS_JUMP_SLOT. (elf_backend_rela_plts_and_copies_p, elf_backend_plt_readonly) (elf_backend_plt_sym_val): Define. * elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Delete. (_bfd_mips_elf_use_plts_and_copy_relocs, _bfd_mips_elf_init_stubs) (_bfd_mips_elf_plt_sym_val, _bfd_mips_post_process_headers): Declare. * elfxx-mips.c (mips_elf_la25_stub): New structure. (LA25_LUI, LA25_J, LA25_ADDIU): New macros. (mips_elf_link_hash_entry): Add "la25_stubs", "has_static_relocs" and "has_nonpic_branches" fields. Remove "is_relocation_target" and "is_branch_target". (mips_elf_link_hash_table): Add blank lines. Add "use_plts_and_copy_relocs", "reserved_gotno", "strampoline", "la25_stubs" and "add_stub_section" fields. (mips_htab_traverse_info): New structure. (PIC_OBJECT_P, MIPS_ELF_LOAD_WORD): New macros. (MIPS_RESERVED_GOTNO): Delete. (mips_o32_exec_plt0_entry, mips_n32_exec_plt0_entry) (mips_n64_exec_plt0_entry, mips_exec_plt_entry): New tables. (mips_elf_link_hash_newfunc): Update after the changes to mips_elf_link_hash_entry. (mips_elf_check_mips16_stubs): Replace the DATA parameter with an INFO parameter. Don't look through warnings symbols here; do it in mips_elf_check_symbols instead. (mips_elf_create_stub_symbol): New function. (mips_elf_la25_stub_hash, mips_elf_la25_stub_eq): New functions. (_bfd_mips_elf_init_stubs, mips_elf_local_pic_function_p): Likewise. (mips_elf_add_la25_intro, mips_elf_add_la25_trampoline): Likewise. (mips_elf_add_la25_stub, mips_elf_check_symbols): New functions. (mips_elf_gotplt_index): Check for VxWorks. (mips_elf_output_dynamic_relocation): Take the relocation index as an extra parameter. Do not increment reloc_count here. (mips_elf_initialize_tls_slots): Update the calls to mips_elf_output_dynamic_relocation accordingly. (mips_elf_multi_got): Use htab->reserved_gotno instead of MIPS_RESERVED_GOTNO. (mips_elf_create_got_section): Don't allocate reserved GOT entries here. Unconditionally create .got.plt, but don't set its alignment here. (mips_elf_relocation_needs_la25_stub): New function. (mips_elf_calculate_relocation): Redirect branches and jumps to a non-PIC stub if one exists. Check !h->has_static_relocs instead of !htab->is_vxworks when deciding whether to create dynamic relocations for R_MIPS_32, R_MIPS_REL32 and R_MIPS_64. (_bfd_mips_elf_create_dynamic_sections): Unconditionally call _bfd_elf_create_dynamic_sections. Unconditionally set up htab->splt and htab->sdynbss. Set htab->srelplt to ".rel.plt" if !htab->is_vxworks. Add non-VxWorks values of htab->plt_header_size and htab->plt_entry_size. (_bfd_mips_elf_check_relocs): Set pointer_equality_needed for non-branch static relocations. Set has_nonpic_branches when an la25 stub might be required. Set can_make_dynamic_p to TRUE if R_MIPS_32, R_MIPS_REL32 and R_MIPS_64 relocations can be made dynamic, rather than duplicating the condition. Do not make them dynamic for read-only sections in non-PIC executable objects. Do not protect this code with dynobj == NULL || htab->sgot == NULL; handle each group of cases separately. Add a default case that sets has_static_relocs for non-GOT relocations that cannot be made dynamic. Don't set is_relocation_target and is_branch_target. Reject non-PIC static relocations in shared objects. (_bfd_mips_vxworks_adjust_dynamic_symbol): Fold into... (_bfd_mips_elf_adjust_dynamic_symbol): ...here, using htab->use_plts_and_copy_relocs instead of htab->is_vxworks to select PLT and copy-reloc handling. Set the alignment of .plt and .got.plt when allocating the first entry. Generalize code to handle REL as well as RELA sections and 64-bit as well as 32-bit GOT entries. Complain if we find a static-only reloc against an externally-defined symbol and if we cannot create dynamic relocations for it. Allocate copy relocs using mips_elf_allocate_dynamic_relocations on non-VxWorks targets. Set possibly_dynamic_relocs to 0 when using PLTs or copy relocs. Skip reserved .got.plt entries. (_bfd_mips_elf_always_size_sections): Use mips_elf_check_symbols instead of mips_elf_check_mips16_stubs to process each symbol. Do the traversal for relocatable objects too. (mips_elf_lay_out_got): Use htab->reserved_gotno instead of MIPS_RESERVED_GOTNO. (_bfd_mips_elf_size_dynamic_sections): Exclude sdynbss if it is empty. Extend the DT_PLTREL, DT_JMPREL and DT_PLTRELSZ handling to non-VxWorks targets. Only add DT_REL{,A}, DT_REL{,A}SZ and DT_REL{,A}ENT if .rel.dyn is nonempty. Create a symbol for the PLT. Allocate a nop at the end of the PLT. Allocate DT_MIPS_PLTGOT. (mips_elf_create_la25_stub_info): New function. (_bfd_mips_elf_finish_dynamic_symbol): Write out PLT entries and copy relocs where necessary. Check pointer_equality_needed. (mips_finish_exec_plt): New function. (_bfd_mips_elf_finish_dynamic_sections): Always set DT_PLTGOT to the beginning of htab->sgot. Use htab->reserved_gotno instead of MIPS_RESERVED_GOTNO. Assert htab->use_plts_and_copy_relocs instead of htab->is_vxworks for DT_PLTREL, DT_PLTRELSZ and DT_JMPREL. Set DT_PLTREL to DT_REL instead of DT_RELA on non-VxWorks targets. Use mips_finish_exec_plt to create non-VxWorks PLT headers. Set DT_MIPS_PLTGOT. (_bfd_mips_elf_copy_indirect_symbol): Copy has_static_relocs from the indirect symbol to the direct symbol. Also copy has_nonpic_branches for indirect symbols. (_bfd_mips_elf_get_target_dtag): Handle DT_MIPS_PLTGOT and DT_MIPS_RWPLT. (_bfd_mips_elf_link_hash_table_create): Initialize the new mips_elf_link_hash_table fields. (_bfd_mips_vxworks_link_hash_table_create): Set use_plts_and_copy_relocs to TRUE. Use TRUE rather than 1 when setting is_vxworks. (_bfd_mips_elf_use_plts_and_copy_relocs): New function. (_bfd_mips_elf_final_link): Call mips_elf_create_la25_stub for each la25_stub. (_bfd_mips_elf_merge_private_bfd_data): Treat dynamic objects as PIC. Generalize message about linking PIC and non-PIC. (_bfd_mips_elf_plt_sym_val, _bfd_mips_post_process_headers): New functions. * reloc.c: Update comment near BFD_RELOC_MIPS_JUMP_SLOT. * bfd-in2.h: Regenerated. 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com> Daniel Jacobowitz <dan@codesourcery.com> Catherine Moore <clm@codesourcery.com> Mark Shinwell <shinwell@codesourcery.com> * readelf.c (get_mips_symbol_other): Handle STO_MIPS_PLT and STO_MIPS_PIC. (slurp_rela_relocs, slurp_rel_relocs): Handle MIPS ELF64 here. (dump_relocations, debug_apply_relocations): Don't handle it here. (get_mips_dynamic_type): Handle DT_MIPS_PLTGOT and DT_MIPS_RWPLT. (print_mips_pltgot_entry): New function. (process_mips_specific): Dump the PLT GOT. 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com> Daniel Jacobowitz <dan@codesourcery.com> * config/tc-mips.c (OPTION_CALL_NONPIC): New macro. (OPTION_NON_SHARED, OPTION_XGOT, OPTION_MABI, OPTION_32) (OPTION_N32, OPTION_64, OPTION_MDEBUG, OPTION_NO_MDEBUG) (OPTION_PDR, OPTION_NO_PDR, OPTION_MVXWORKS_PIC): Bump by 1. (md_longopts): Add -call_nonpic. (md_parse_option): Handle OPTION_CALL_NONPIC. (md_show_usage): Add -call_nonpic. 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com> * gas/mips/call-nonpic-1.s, gas/mips/call-nonpic-1.d: New test. * gas/mips/mips.exp: Run it. 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com> Daniel Jacobowitz <dan@codesourcery.com> Catherine Moore <clm@codesourcery.com> Mark Shinwell <shinwell@codesourcery.com> * mips.h (STO_MIPS_PLT, ELF_ST_IS_MIPS_PLT, ELF_ST_SET_MIPS_PLT) (STO_MIPS_PIC, DT_MIPS_PLTGOT, DT_MIPS_RWPLT): New macros. 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com> Daniel Jacobowitz <dan@codesourcery.com> * emulparams/elf32bmip.sh (GOT): Define, moving .got.plt to... (OTHER_RELRO_SECTIONS, OTHER_READWRITE_SECTIONS): ...one of these two variables. * emulparams/elf32bmipn32-defs.sh: Likewise. * emultempl/mipself.em: Include ldctor.h, elf/mips.h and elfxx-mips.h. (is_mips_elf): New macro. (stub_file, stub_bfd): New variables. (hook_stub_info): New structure. (hook_in_stub): New function. (mips_add_stub_section): Likewise. (mips_create_output_section_statements): Likewise. (mips_before_allocation): Likewise. (real_func): New variable. (mips_for_each_input_file_wrapper): New function. (mips_lang_for_each_input_file): Likewise. (lang_for_each_input_file): Define. (LDEMUL_BEFORE_ALLOCATION): Likewise. (LDEMUL_CREATE_OUTPUT_SECTION_STATEMENTS): Likewise. 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com> Daniel Jacobowitz <dan@codesourcery.com> * ld-mips-elf/mips16-pic-3a.s, ld-mips-elf/mips16-pic-3b.s, ld-mips-elf/mips16-pic-3.dd, ld-mips-elf/mips16-pic-3.gd, ld-mips-elf/mips16-pic-3.rd, ld-mips-elf/mips16-pic-3.inc, ld-mips-elf/pic-and-nonpic-1a.s, ld-mips-elf/pic-and-nonpic-1b.s, ld-mips-elf/pic-and-nonpic-1.ld, ld-mips-elf/pic-and-nonpic-1.dd, ld-mips-elf/pic-and-nonpic-1.nd, ld-mips-elf/pic-and-nonpic-1-rel.dd, ld-mips-elf/pic-and-nonpic-1-rel.nd, ld-mips-elf/pic-and-nonpic-2a.s, ld-mips-elf/pic-and-nonpic-2b.s, ld-mips-elf/pic-and-nonpic-2.d, ld-mips-elf/pic-and-nonpic-3a.s, ld-mips-elf/pic-and-nonpic-3a.ld, ld-mips-elf/pic-and-nonpic-3a.dd, ld-mips-elf/pic-and-nonpic-3a.gd, ld-mips-elf/pic-and-nonpic-3a.sd, ld-mips-elf/pic-and-nonpic-3b.s, ld-mips-elf/pic-and-nonpic-3b.ld, ld-mips-elf/pic-and-nonpic-3b.ad, ld-mips-elf/pic-and-nonpic-3b.dd, ld-mips-elf/pic-and-nonpic-3b.gd, ld-mips-elf/pic-and-nonpic-3b.nd, ld-mips-elf/pic-and-nonpic-3b.pd, ld-mips-elf/pic-and-nonpic-3b.rd, ld-mips-elf/pic-and-nonpic-3b.sd, ld-mips-elf/pic-and-nonpic-3-error.d, ld-mips-elf/pic-and-nonpic-4a.s, ld-mips-elf/pic-and-nonpic-4b.s, ld-mips-elf/pic-and-nonpic-4b.ld, ld-mips-elf/pic-and-nonpic-4b.ad, ld-mips-elf/pic-and-nonpic-4b.dd, ld-mips-elf/pic-and-nonpic-4b.gd, ld-mips-elf/pic-and-nonpic-4b.nd, ld-mips-elf/pic-and-nonpic-4b.rd, ld-mips-elf/pic-and-nonpic-4b.sd, ld-mips-elf/pic-and-nonpic-4-error.d, ld-mips-elf/pic-and-nonpic-5a.s, ld-mips-elf/pic-and-nonpic-5b.s, ld-mips-elf/pic-and-nonpic-5b.ld, ld-mips-elf/pic-and-nonpic-5b.ad, ld-mips-elf/pic-and-nonpic-5b.dd, ld-mips-elf/pic-and-nonpic-5b.gd, ld-mips-elf/pic-and-nonpic-5b.nd, ld-mips-elf/pic-and-nonpic-5b.rd, ld-mips-elf/pic-and-nonpic-5b.sd, ld-mips-elf/pic-and-nonpic-5b.pd, ld-mips-elf/pic-and-nonpic-6.ld, ld-mips-elf/pic-and-nonpic-6-o32a.s, ld-mips-elf/pic-and-nonpic-6-o32b.s, ld-mips-elf/pic-and-nonpic-6-o32c.s, ld-mips-elf/pic-and-nonpic-6-o32.ad, ld-mips-elf/pic-and-nonpic-6-o32.dd, ld-mips-elf/pic-and-nonpic-6-o32.gd, ld-mips-elf/pic-and-nonpic-6-o32.nd, ld-mips-elf/pic-and-nonpic-6-o32.pd, ld-mips-elf/pic-and-nonpic-6-o32.rd, ld-mips-elf/pic-and-nonpic-6-o32.sd, ld-mips-elf/pic-and-nonpic-6-n32a.s, ld-mips-elf/pic-and-nonpic-6-n32b.s, ld-mips-elf/pic-and-nonpic-6-n32c.s, ld-mips-elf/pic-and-nonpic-6-n32.ad, ld-mips-elf/pic-and-nonpic-6-n32.dd, ld-mips-elf/pic-and-nonpic-6-n32.gd, ld-mips-elf/pic-and-nonpic-6-n32.nd, ld-mips-elf/pic-and-nonpic-6-n32.pd, ld-mips-elf/pic-and-nonpic-6-n32.rd, ld-mips-elf/pic-and-nonpic-6-n32.sd, ld-mips-elf/pic-and-nonpic-6-n64a.s, ld-mips-elf/pic-and-nonpic-6-n64b.s, ld-mips-elf/pic-and-nonpic-6-n64c.s, ld-mips-elf/pic-and-nonpic-6-n64.ad, ld-mips-elf/pic-and-nonpic-6-n64.dd, ld-mips-elf/pic-and-nonpic-6-n64.gd, ld-mips-elf/pic-and-nonpic-6-n64.nd, ld-mips-elf/pic-and-nonpic-6-n64.pd, ld-mips-elf/pic-and-nonpic-6-n64.rd, ld-mips-elf/pic-and-nonpic-6-n64.sd: New tests. * ld-mips-elf/mips-elf.exp: Run them.
2008-07-10include/elf/Richard Sandiford1-0/+2
* mips.h (ELF_ST_IS_MIPS16, ELF_ST_SET_MIPS16): New macros. bfd/ * elfxx-mips.c (mips_elf_check_mips16_stubs): Use ELF_ST_IS_MIPS16. (mips_elf_calculate_relocation): Likewise. (_bfd_mips_elf_add_symbol_hook): Likewise. (_bfd_mips_elf_finish_dynamic_symbol): Likewise. (_bfd_mips_vxworks_finish_dynamic_symbol): Likewise. opcodes/ * mips-dis.c (_print_insn_mips): Use ELF_ST_IS_MIPS16. gas/ * config/tc-mips.c (mips16_mark_labels): Use ELF_ST_SET_MIPS16. (mips_fix_adjustable): Likewise. (mips_frob_file_after_relocs): Likewise. gas/testsuite/ * gas/mips/mips16-vis-1.d, gas/mips/mips16-vis-1.s: New tests. * gas/mips/mips.exp: Run them.
2008-03-11 * elf/cr16c.h (SHN_CR16C_FCOMMON): Define using SHN_LORESERVE.Alan Modra1-5/+5
(SHN_CR16C_NCOMMON): Likewise. * elf/hppa.h (SHN_PARISC_ANSI_COMMON): Likewise. (SHN_PARISC_HUGE_COMMON): Likewise. * elf/ia64.h (SHN_IA_64_ANSI_COMMON): Likewise. (SHN_IA_64_VMS_SYMVEC): Define using SHN_LOOS. * elf/m32r.h (SHN_M32R_SCOMMON): Define using SHN_LORESERVE. * elf/mips.h (SHN_MIPS_ACOMMON, SHN_MIPS_TEXT): Likewise. (SHN_MIPS_DATA, SHN_MIPS_SCOMMON, SHN_MIPS_SUNDEFINED): Likewise. * elf/score.h (SHN_SCORE_TEXT, SHN_SCORE_DATA): Likewise. (SHN_SCORE_SCOMMON): Likewise. * elf/sparc.h (SHN_BEFORE, SHN_AFTER): Likewise. * elf/v850.h (SHN_V850_SCOMMON, SHN_V850_TCOMMON): Likewise. (SHN_V850_ZCOMMON): Likewise. * elf/x86-64.h (SHN_X86_64_LCOMMON): Likewise.
generated by cgit v1.1 at 2024-11-24 18:53:06 +0000