aboutsummaryrefslogtreecommitdiff
path: root/include/dis-asm.h
AgeCommit message (Collapse)AuthorFilesLines
2024-01-04Update year range in copyright notice of binutils filesAlan Modra1-1/+1
Adds two new external authors to etc/update-copyright.py to cover bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then updates copyright messages as follows: 1) Update cgen/utils.scm emitted copyrights. 2) Run "etc/update-copyright.py --this-year" with an extra external author I haven't committed, 'Kalray SA.', to cover gas testsuite files (which should have their copyright message removed). 3) Build with --enable-maintainer-mode --enable-cgen-maint=yes. 4) Check out */po/*.pot which we don't update frequently.
2023-08-16kvx: New port.Paul Iannetta1-0/+1
2023-08-02Revert "2.41 Release sources"Sam James1-0/+1
This reverts commit 675b9d612cc59446e84e2c6d89b45500cb603a8d. See https://sourceware.org/pipermail/binutils/2023-August/128761.html.
2023-08-022.41 Release sourcesbinutils-2_41-releaseNick Clifton1-1/+0
2023-07-21DesCGENization of the BPF binutils portJose E. Marchesi1-0/+1
CGEN is cool, but the BPF architecture is simply too bizarre for it. The weird way of BPF to handle endianness in instruction encoding, the weird C-like alternative assembly syntax, the weird abuse of multi-byte (or infra-byte) instruction fields as opcodes, the unusual presence of opcodes beyond the first 32-bits of some instructions, are all examples of what makes it a PITA to continue using CGEN for this port. The bpf.cpu file is becoming so complex and so nested with p-macros that it is very difficult to read, and quite challenging to update. Also, every time we are forced to change something in CGEN to accommodate BPF requirements (which is often) we have to do extensive testing to make sure we do not break any other target using CGEN. This is getting un-maintenable. So I have decided to bite the bullet and revamp/rewrite the port so it no longer uses CGEN. Overall, this involved: * To remove the cpu/bpf.{cpu,opc} descriptions. * To remove the CGEN generated files. * To replace the CGEN generated opcodes table with a new hand-written opcodes table for BPF. * To replace the CGEN generated disassembler wih a new disassembler that uses the new opcodes. * To replace the CGEN generated assembler with a new assembler that uses the new opcodes. * To replace the CGEN generated simulator with a new simulator that uses the new opcodes. [This is pushed in GDB in another patch.] * To adapt the build systems to the new situation. Additionally, this patch introduces some extensions and improvements: * A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These relocations are used for section-relative 16-bit offsets used in load/store instructions. * The disassembler now has support for the "pseudo-c" assembly syntax of BPF. What dialect to use when disassembling is controlled by a command line option. * The disassembler now has support for dumping instruction immediates in either octal, hexadecimal or decimal. The used output base is controlled by a new command-line option. * The GAS BPF test suite has been re-structured and expanded in order to test the disassembler pseudoc syntax support. Minor bugs have been also fixed there. The assembler generic tests that were disabled for bpf-*-* targets due to the previous implementation of pseudoc syntax are now re-enabled. Additional tests have been added to test the new features of the assembler. .dump files are no longer used. * The linker BPF test suite has been adapted to the command line options used by the new disassembler. The result is very satisfactory. This patchs adds 3448 lines of code and removes 10542 lines of code. Tested in: * Target bpf-unknown-none with 64-bit little-endian host and 32-bit little-endian host. * Target x86-64-linux-gnu with --enable-targets=all Note that I have not tested in a big-endian host yet. I will do so once this lands upstream so I can use the GCC compiler farm. I have not included ChangeLog entries in this patch: these would be massive and not very useful, considering this is pretty much a rewrite of the port. I beg the indulgence of the global maintainers.
2023-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
2022-09-06opcodes: Add non-enum disassembler optionsTsukasa OI1-1/+2
This is paired with "gdb: Add non-enum disassembler options". There is a portable mechanism for disassembler options and used on some architectures: - ARC - Arm - MIPS - PowerPC - RISC-V - S/390 However, it only supports following forms: - [NAME] - [NAME]=[ENUM_VALUE] Valid values for [ENUM_VALUE] must be predefined in disasm_option_arg_t.values. For instance, for -M cpu=[CPU] in ARC architecture, opcodes/arc-dis.c builds valid CPU model list from include/elf/arc-cpu.def. In this commit, it adds following format: - [NAME]=[ARBITRARY_VALUE] (cannot contain "," though) This is identified by NULL value of disasm_option_arg_t.values (normally, this is a non-NULL pointer to a NULL-terminated list). include/ChangeLog: * dis-asm.h (disasm_option_arg_t): Update comment of values to allow non-enum disassembler options. opcodes/ChangeLog: * riscv-dis.c (print_riscv_disassembler_options): Support non-enum disassembler options on printing disassembler help. * arc-dis.c (print_arc_disassembler_options): Likewise. * mips-dis.c (print_mips_disassembler_options): Likewise.
2022-07-25opcodes: add new sub-mnemonic disassembler styleAndrew Burgess1-0/+7
When adding libopcodes disassembler styling support for AArch64, it feels like the results would be improved by having a new sub-mnemonic style. This will be used in cases like: add w16, w7, w1, uxtb #2 ^^^^----- Here And: cinc w0, w1, ne ^^----- Here This commit just adds the new style, and prepares objdump to handle the style. A later commit will add AArch64 styling, and will actually make use of the style. As this style is currently unused, there should be no user visible changes after this commit.
2022-04-04objdump/opcodes: add syntax highlighting to disassembler outputAndrew Burgess1-5/+83
This commit adds the _option_ of having disassembler output syntax highlighted in objdump. This option is _off_ by default. The new command line options are: --disassembler-color=off # The default. --disassembler-color=color --disassembler-color=extended-color I have implemented two colour modes, using the same option names as we use of --visualize-jumps, a basic 8-color mode ("color"), and an extended 8bit color mode ("extended-color"). The syntax highlighting requires that each targets disassembler be updated; each time the disassembler produces some output we now pass through an additional parameter indicating what style should be applied to the text. As updating all target disassemblers is a large task, the old API is maintained. And so, a user of the disassembler (i.e. objdump, gdb) must provide two functions, the current non-styled print function, and a new, styled print function. I don't currently have a plan for converting every single target disassembler, my hope is that interested folk will update the disassemblers they are interested in. But it is possible some might never get updated. In this initial series I intend to convert the RISC-V disassembler completely, and also do a partial conversion of the x86 disassembler. Hopefully having the x86 disassembler at least partial converted will allow more people to try this out easily and provide feedback. In this commit I have focused on objdump. The changes to GDB at this point are the bare minimum required to get things compiling, GDB makes no use of the styling information to provide any colors, that will come later, if this commit is accepted. This first commit in the series doesn't convert any target disassemblers at all (the next two commits will update some targets), so after this commit, the only color you will see in the disassembler output, is that produced from objdump itself, e.g. from objdump_print_addr_with_sym, where we print an address and a symbol name, these are now printed with styling information, and so will have colors applied (if the option is on). Finally, my ability to pick "good" colors is ... well, terrible. I'm in no way committed to the colors I've picked here, so I encourage people to suggest new colors, or wait for this commit to land, and then patch the choice of colors. I do have an idea about using possibly an environment variable to allow the objdump colors to be customised, but I haven't done anything like that in this commit, the color choices are just fixed in the code for now. binutils/ChangeLog: * NEWS: Mention new feature. * doc/binutils.texi (objdump): Describe --disassembler-color option. * objdump.c (disassembler_color): New global. (disassembler_extended_color): Likewise. (disassembler_in_comment): Likewise. (usage): Mention --disassembler-color option. (long_options): Add --disassembler-color option. (objdump_print_value): Use fprintf_styled_func instead of fprintf_func. (objdump_print_symname): Likewise. (objdump_print_addr_with_sym): Likewise. (objdump_color_for_disassembler_style): New function. (objdump_styled_sprintf): New function. (fprintf_styled): New function. (disassemble_jumps): Use disassemble_set_printf, and reset disassembler_in_comment. (null_styled_print): New function. (disassemble_bytes): Use disassemble_set_printf, and reset disassembler_in_comment. (disassemble_data): Update init_disassemble_info call. (main): Handle --disassembler-color option. include/ChangeLog: * dis-asm.h (enum disassembler_style): New enum. (struct disassemble_info): Add fprintf_styled_func field, and created_styled_output field. (disassemble_set_printf): Declare. (init_disassemble_info): Add additional parameter. (INIT_DISASSEMBLE_INFO): Add additional parameter. opcodes/ChangeLog: * dis-init.c (init_disassemble_info): Take extra parameter, initialize the new fprintf_styled_func and created_styled_output fields. * disassembler.c (disassemble_set_printf): New function definition.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-11-26opcodes/riscv: add disassembler options support to libopcodesAndrew Burgess1-0/+1
In preparation for the next commit, which will add GDB support for RISC-V disassembler options, this commit restructures how the disassembler options are managed within libopcodes. The implementation provided here is based on this mailing list patch which was never committed: https://sourceware.org/pipermail/binutils/2021-January/114944.html which in turn took inspiration from the MIPS implementation of the same feature. The biggest changes from the original mailing list post are: 1. The GDB changes have been split into a separate patch, and 2. The `riscv_option_args_privspec` variable, which held the valid priv-spec values is now gone, instead we use the `riscv_priv_specs` array from bfd/cpu-riscv.c instead. Co-authored-by: Simon Cook <simon.cook@embecosm.com> include/ChangeLog: * dis-asm.h (disassembler_options_riscv): Declare. opcodes/ChangeLog: * riscv-dis.c (enum riscv_option_arg_t): New enum typedef. (riscv_options): New static global. (disassembler_options_riscv): New function. (print_riscv_disassembler_options): Rewrite to use disassembler_options_riscv.
2021-10-24LoongArch opcodes supportliuzhensong1-0/+1
2021-10-22 Chenghua Xu <xuchenghua@loongson.cn> Zhensong Liu <liuzhensong@loongson.cn> Weinan Liu <liuweinan@loongson.cn> include/ * opcode/loongarch.h: New. * dis-asm.h: Declare print_loongarch_disassembler_options. opcodes/ * Makefile.am: Add LoongArch. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Declare print_insn_loongarch. * loongarch-coder.c: New. * loongarch-dis.c: New. * loongarch-opc.c: New. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2021-06-02arc: Construct disassembler options dynamicallyShahab Vahedi1-0/+1
The idea of this change is simple: Populate a data structure, namely "disasm_option_and_arg_t" from "include/dis-asm.h", to encompass the disassembly options and their possible arguments. This will make it easier to manage or extend those options by adapting entries in a data structure, "arc_options". There will be lesser need to hard-code the options in the code itself. Moreover, ARC GDB will use this population function, "disassembler_options_arc ()", to enable the "set disassembler-option" for ARC targets. The gdb change will be in a separate patch though. The changes in this patch can be divided into: 1) Introduction of "disassembler_options_arc ()" that will return a "disasm_option_and_arg_t" structure representing the disassembly options and their likely arguments. 2) New data type "arc_options_arg_t" and new data "arc_options". These are the internals for keeping track of options and arguments entries that can easily be extended. 3) To print the options, the "print_arc_disassembler_options ()" has been adjusted to use this dynamically built structure instead of having them hard-coded inside. To see this in effect, one can look into the output of: $ ./binutils/objdump --help ... The following ARC specific disassembler options are... ... include/ChangeLog: * dis-asm.h (disassembler_options_arc): New prototype. opcodes/ChangeLog: * arc-dis.c (arc_option_arg_t): New enumeration. (arc_options): New variable. (disassembler_options_arc): New function. (print_arc_disassembler_options): Reimplement in terms of "disassembler_options_arc".
2021-04-09PowerPC disassembly of pcrel referencesAlan Modra1-0/+4
This adds some annotation to Power10 pcrel instructions, displaying the target address (ie. pc + D34 field) plus a symbol if there is one at exactly that target address. pld from the .got or .plt will also look up the entry and display it, symbolically if there is a dynamic relocation on the entry. include/ * dis-asm.h (struct disassemble_info): Add dynrelbuf and dynrelcount. binutils/ * objdump.c (struct objdump_disasm_info): Delete dynrelbuf and dynrelcount. (find_symbol_for_address): Adjust for dynrelbuf and dynrelcount move. (disassemble_section, disassemble_data): Likewise. opcodes/ * ppc-dis.c (struct dis_private): Add "special". (POWERPC_DIALECT): Delete. Replace uses with.. (private_data): ..this. New inline function. (disassemble_init_powerpc): Init "special" names. (skip_optional_operands): Add is_pcrel arg, set when detecting R field of prefix instructions. (bsearch_reloc, print_got_plt): New functions. (print_insn_powerpc): For pcrel instructions, print target address and symbol if known, and decode plt and got loads too. gas/ * testsuite/gas/ppc/prefix-pcrel.d: Update expected output. * testsuite/gas/ppc/prefix-reloc.d: Likewise. * gas/testsuite/gas/ppc/vsx_32byte.d: Likewise. ld/ * testsuite/ld-powerpc/inlinepcrel-1.d: Update expected output. * testsuite/ld-powerpc/inlinepcrel-2.d: Likewise. * testsuite/ld-powerpc/notoc2.d: Likewise. * testsuite/ld-powerpc/notoc3.d: Likewise. * testsuite/ld-powerpc/pcrelopt.d: Likewise. * testsuite/ld-powerpc/startstop.d: Likewise. * testsuite/ld-powerpc/tlsget.d: Likewise. * testsuite/ld-powerpc/tlsget2.d: Likewise. * testsuite/ld-powerpc/tlsld.d: Likewise. * testsuite/ld-powerpc/weak1.d: Likewise. * testsuite/ld-powerpc/weak1so.d: Likewise.
2021-04-06Return symbol from symbol_at_address_funcAlan Modra1-5/+5
include/ * dis-asm.h (struct disassemble_info <symbol_at_address_func>): Return asymbol*. binutils/ * objdump.c (objdump_symbol_at_address): Return asymbol*. opcodes/ * dis-buf.c (generic_symbol_at_address): Return symbol* NULL. * s12z-dis.c (decode_possible_symbol): Use symbol returned from symbol_at_address_func.
2021-03-31Use bool in includeAlan Modra1-8/+8
* bfdlink.h: Replace bfd_boolean with bool throughout. * coff/ecoff.h: Likewise. * coff/xcoff.h: Likewise. * dis-asm.h: Likewise. * elf/mmix.h: Likewise. * elf/xtensa.h: Likewise. * opcode/aarch64.h: Likewise, and FALSE with false, TRUE with true. * opcode/arc.h: Likewise. * opcode/mips.h: Likewise. * opcode/tic6x-opcode-table.h: Likewise. * opcode/tic6x.h: Likewise.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-12-11ubsan: left shift of cannot be represented in type 'int'Alan Modra1-4/+4
* dis-asm.h (INSN_HAS_RELOC, DISASSEMBLE_DATA), (USER_SPECIFIED_MACHINE_TYPE, WIDE_OUTPUT): Make unsigned. * opcode/tic80.h (TIC80_OPERAND_*): Likewise.
2019-12-10PR24960, Memory leak from disassemblerAlan Modra1-1/+4
PR 24960 include/ * dis-asm.h (disassemble_free_target): Declare. opcodes/ * disassemble.c (disassemble_free_target): New function. binutils/ * objdump.c (disassemble_data): Call disassemble_free_target.
2019-12-10Use disassemble_info.private_data in place of insn_setsAlan Modra1-8/+0
No cgen target uses private_data. This patch removes a disassemble_info field that is only used by cgen, and instead uses private_data. It also removes a macro that is no longer used. include/ * dis-asm.h (struct disassemble_info): Delete insn_sets. (INIT_DISASSEMBLE_INFO_NO_ARCH): Don't define. opcodes/ * cgen-dis.in (print_insn_@arch@): Replace insn_sets with private_data. * disassemble.c (disassemble_init_for_target): Likewise. * bpf-dis.c: Regenerate. * epiphany-dis.c: Regenerate. * fr30-dis.c: Regenerate. * frv-dis.c: Regenerate. * ip2k-dis.c: Regenerate. * iq2000-dis.c: Regenerate. * lm32-dis.c: Regenerate. * m32c-dis.c: Regenerate. * m32r-dis.c: Regenerate. * mep-dis.c: Regenerate. * mt-dis.c: Regenerate. * or1k-dis.c: Regenerate. * xc16x-dis.c: Regenerate. * xstormy16-dis.c: Regenerate.
2019-05-24PowerPC add initial -mfuture instruction supportPeter Bergner1-0/+2
This patch adds initial 64-bit insn assembler/disassembler support. The only instruction added is "pnop" along with the automatic aligning of prefix instruction so they do not cross 64-byte boundaries. include/ * dis-asm.h (WIDE_OUTPUT): Define. * opcode/ppc.h (prefix_opcodes, prefix_num_opcodes): Declare. (PPC_OPCODE_POWERXX, PPC_GET_PREFIX, PPC_GET_SUFFIX), (PPC_PREFIX_P, PPC_PREFIX_SEG): Define. opcodes/ * ppc-dis.c (ppc_opts): Add "future" entry. (PREFIX_OPCD_SEGS): Define. (prefix_opcd_indices): New array. (disassemble_init_powerpc): Initialize prefix_opcd_indices. (lookup_prefix): New function. (print_insn_powerpc): Handle 64-bit prefix instructions. * ppc-opc.c (PREFIX_OP, PREFIX_FORM, SUFFIX_MASK, PREFIX_MASK), (PMRR, POWERXX): Define. (prefix_opcodes): New instruction table. (prefix_num_opcodes): New constant. binutils/ * objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags. gas/ * config/tc-ppc.c (ppc_setup_opcodes): Handle prefix_opcodes. (struct insn_label_list): New. (insn_labels, free_insn_labels): New variables. (ppc_record_label, ppc_clear_labels, ppc_start_line_hook): New funcs. (ppc_frob_label, ppc_new_dot_label): Move functions earlier in file and call ppc_record_label. (md_assemble): Handle 64-bit prefix instructions. Align labels that are on the same line as a prefix instruction. * config/tc-ppc.h (tc_frob_label, ppc_frob_label): Move to later in the file. (md_start_line_hook): Define. (ppc_start_line_hook): Declare. * testsuite/gas/ppc/prefix-align.d, * testsuite/gas/ppc/prefix-align.s: New test. * testsuite/gas/ppc/ppc.exp: Run new test.
2019-03-25AArch64: Fix disassembler bug with out-of-order sectionsTamar Christina1-0/+6
The AArch64 disassembler has an optimization that it uses to reduce the amount it has to search for mapping symbols during disassembly. This optimization assumes that sections are listed in the section header in monotonic increasing VMAs. However this is not a requirement for the ELF specification. Because of this when such "out of order" sections occur the disassembler would pick the wrong mapping symbol to disassemble the section with. This fixes it by explicitly passing along the stop offset for the current disassembly glob and when this changes compared to the previous one we've seen the optimization won't be performed. In effect this restarts the search from a well defined starting point. Usually the symbol's address. The existing stop_vma can't be used for this as it is allowed to be unset and setting this unconditionally would change the semantics of this field. binutils/ChangeLog: * objdump.c (disassemble_bytes): Pass stop_offset. * testsuite/binutils-all/aarch64/out-of-order.T: New test. * testsuite/binutils-all/aarch64/out-of-order.d: New test. * testsuite/binutils-all/aarch64/out-of-order.s: New test. include/ChangeLog: * dis-asm.h (struct disassemble_info): Add stop_offset. opcodes/ChangeLog: * aarch64-dis.c (last_stop_offset): New. (print_insn_aarch64): Use stop_offset.
2019-01-14Include <string.h> to dis-asm.h to get strchr declarationПавел Крюков1-0/+1
Include <string.h> to dis-asm.h to get strchr declaration include/Changelog: 2019-01-11 Pavel I. Kryukov <kryukov@frtk.ru> * dis-asm.h: include <string.h>
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-12-06opcodes/riscv: Hide '.L0 ' fake symbolsAndrew Burgess1-0/+1
The RISC-V assembler generates fake labels with the name '.L0 ' as part of the debug information (see gas/config/tc-riscv.h:FAKE_LABEL_NAME). The problem is that currently, when disassembling an object file, the output looks like this (this is an example from the GDB testsuite, but is pretty representative of anything with debug information): 000000000000001e <main>: 1e: 7179 addi sp,sp,-48 20: f406 sd ra,40(sp) 22: f022 sd s0,32(sp) 24: 1800 addi s0,sp,48 0000000000000026 <.L0 >: 26: 87aa mv a5,a0 28: feb43023 sd a1,-32(s0) 2c: fcc43c23 sd a2,-40(s0) 30: fef42623 sw a5,-20(s0) 0000000000000034 <.L0 >: 34: fec42783 lw a5,-20(s0) 38: 0007871b sext.w a4,a5 3c: 678d lui a5,0x3 3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d> 42: 02f71463 bne a4,a5,6a <.L0 > 0000000000000046 <.L0 >: 46: 000007b7 lui a5,0x0 4a: 0007b783 ld a5,0(a5) # 0 <need_malloc> 4e: 6f9c ld a5,24(a5) 0000000000000050 <.L0 >: 50: 86be mv a3,a5 52: 466d li a2,27 54: 4585 li a1,1 56: 000007b7 lui a5,0x0 5a: 00078513 mv a0,a5 5e: 00000097 auipc ra,0x0 62: 000080e7 jalr ra # 5e <.L0 +0xe> 0000000000000066 <.L0 >: 66: 4785 li a5,1 68: a869 j 102 <.L0 > 000000000000006a <.L0 >: 6a: 000007b7 lui a5,0x0 6e: 00078513 mv a0,a5 72: 00000097 auipc ra,0x0 76: 000080e7 jalr ra # 72 <.L0 +0x8> The frequent repeated '.L0 ' labels are pointless, as they are non-unique there's no way to match a use of '.L0 ' to its appearence in the output, so we'd be better off just not printing it at all. That's what this patch does by defining a 'symbol_is_valid' method for RISC-V. With this commit, the same disassembly now looks like this: 000000000000001e <main>: 1e: 7179 addi sp,sp,-48 20: f406 sd ra,40(sp) 22: f022 sd s0,32(sp) 24: 1800 addi s0,sp,48 26: 87aa mv a5,a0 28: feb43023 sd a1,-32(s0) 2c: fcc43c23 sd a2,-40(s0) 30: fef42623 sw a5,-20(s0) 34: fec42783 lw a5,-20(s0) 38: 0007871b sext.w a4,a5 3c: 678d lui a5,0x3 3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d> 42: 02f71463 bne a4,a5,6a <.L4> 46: 000007b7 lui a5,0x0 4a: 0007b783 ld a5,0(a5) # 0 <need_malloc> 4e: 6f9c ld a5,24(a5) 50: 86be mv a3,a5 52: 466d li a2,27 54: 4585 li a1,1 56: 000007b7 lui a5,0x0 5a: 00078513 mv a0,a5 5e: 00000097 auipc ra,0x0 62: 000080e7 jalr ra # 5e <main+0x40> 66: 4785 li a5,1 68: a869 j 102 <.L5> 000000000000006a <.L4>: 6a: 000007b7 lui a5,0x0 6e: 00078513 mv a0,a5 72: 00000097 auipc ra,0x0 76: 000080e7 jalr ra # 72 <.L4+0x8> In order to share the fake label between the assembler and the libopcodes library, I've added some new defines RISCV_FAKE_LABEL_NAME and RISCV_FAKE_LABEL_CHAR in include/opcode/riscv.h. I could have just moved FAKE_LABEL_NAME to the include file, however, I thnk this would be confusing, someone working on the assembler would likely not expect to find FAKE_LABEL_NAME defined outside of the assembler source tree. By introducing the RISCV_FAKE_LABEL_* defines I can leave the assembler standard FAKE_LABEL_ defines in the assembler source, but still share the RISCV_FAKE_LABEL_* with libopcodes. gas/ChangeLog: * config/tc-riscv.h (FAKE_LABEL_NAME): Define as RISCV_FAKE_LABEL_NAME. (FAKE_LABEL_CHAR): Define as RISCV_FAKE_LABEL_CHAR. include/ChangeLog: * dis-asm.h (riscv_symbol_is_valid): Declare. * opcode/riscv.h (RISCV_FAKE_LABEL_NAME): Define. (RISCV_FAKE_LABEL_CHAR): Define. opcodes/ChangeLog: * disassembler.c (disassemble_init_for_target): Add RISC-V initialisation. * riscv-dis.c (riscv_symbol_is_valid): New function.
2018-10-03Make print_insn_s12z public.John Darrington1-0/+1
Gdb can use this function in its stack unwinder. * include/dis-asm.h (print_insn_s12z): Add declaration.
2018-09-20Andes Technology has good news for you, we plan to update the nds32 port of ↵Nick Clifton1-0/+1
binutils on upstream! We have not only removed all unsupported and obsolete code, but also supported lost of new features, including better link-time relaxations and TLS implementations. Besides, the files generated by the newly assembler and linker usually get higher performance and more optimized code size. ld * emultempl/nds32elf.em (hyper_relax): New variable. (nds32_elf_create_output_section_statements): the parameters of bfd_elf32_nds32_set_target_option (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax. * emultempl/nds32elf.em (nds32_elf_after_open): Updated. * emultempl/nds32elf.em (tls_desc_trampoline): New variable. * (nds32_elf_create_output_section_statements): Updated. * (nds32_elf_after_parse): Disable relaxations when PIC is enable. * (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline. include * elf/nds32.h: Remove the unused target features. * dis-asm.h (disassemble_init_nds32): Declared. * elf/nds32.h (E_NDS32_NULL): Removed. (E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New. * opcode/nds32.h: Ident. (N32_SUB6, INSN_LW): New macros. (enum n32_opcodes): Updated. * elf/nds32.h: Doc fixes. * elf/nds32.h: Add R_NDS32_LSI. * elf/nds32.h: Add new relocations for TLS. gas * config/tc-nds32.c: Remove the unused target features. (nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp, nds32_set_elf_flags_by_insn, nds32_insert_relax_entry, nds32_apply_fix): Likewise. (nds32_no_ex9_begin): Removed. * config/tc-nds32.c (add_mapping_symbol_for_align, make_mapping_symbol, add_mapping_symbol): New functions. * config/tc-nds32.h (enum mstate): New. (nds32_segment_info_type): Likewise. * configure.ac (--enable-dsp-ext, --enable-zol-ext): New options. * config.in: Regenerated. * configure: Regenerated. * config/tc-nds32.c (nds32_dx_regs): Set the value according to the configuration. (nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext): Likewise. (nds32_dsp_ext): New variable. Set the value according to the configuration. (nds32_zol_ext): Likewise. (asm_desc, nds32_pseudo_opcode_table): Make them static. (nds32_set_elf_flags_by_insn): Updated. (nds32_check_insn_available): Updated. (nds32_str_tolower): New function. * config/tc-nds32.c (relax_table): Updated. (md_begin): Updated. (md_assemble): Use XNEW macro to allocate space for `insn.info', and then remember to free it. (md_section_align): Cast (-1) to ValueT. (nds32_get_align): Cast (~0U) to addressT. (nds32_relax_branch_instructions): Updated. (md_convert_frag): Add new local variable `final_r_type'. (invalid_prev_frag): Add new bfd_boolean parameter `relax'. All callers changed. * config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field. (struct nds32_hint_map): Add `option_list' field. (struct suffix_name, suffix_table): Remove the unused `pic' field. (do_pseudo_b, do_pseudo_bal): Remove the suffix checking. (do_pseudo_la_internal, do_pseudo_pushpopm): Indent. (relax_hint_bias, relax_hint_id_current): New static variables. (reset_bias, relax_hint_begin): New variables. (nds_itoa): New function. (CLEAN_REG, GET_OPCODE): New macros. (struct relax_hint_id): New. (nds32_relax_hint): For .relax_hint directive, we can use `begin' and `end' to mark the relax pattern without giving exactly id number. (nds32_elf_append_relax_relocs): Handle the case that the .relax_hint directives are attached to pseudo instruction. (nds32_elf_save_pseudo_pattern): Change the second parameter from instruction's opcode to byte code. (nds32_elf_build_relax_relation): Add new bfd_boolean parameter `pseudo_hint'. (nds32_lookup_pseudo_opcode): Fix the overflow issue. (enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT. (nds32_elf_record_fixup_exp, relax_ls_table, hint_map, nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name): Updated. * config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6. (enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and NDS32_RELAX_HINT_LA_GOTOFF. * config/tc-nds32.h (relax_ls_table): Add floating load/store to gp relax pattern. (hint_map, nds32_find_reloc_table): Likewise. * configure.ac: Define NDS32_LINUX_TOOLCHAIN. * configure: Regenerated. * config.in: Regenerated. * config/tc-nds32.h (enum nds32_ramp): Updated. (enum nds32_relax_hint_type): Likewise. * config/tc-nds32.c: Include "errno.h" and "limits.h". (relax_ls_table): Add TLS relax patterns. (nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on each instructions of TLS patterns. (nds32_elf_record_fixup_exp): Updated. (nds32_apply_fix): Likewise. (suffix_table): Add TLSDESC suffix. binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number from 215 to 255 for NDS32. bfd * elf32-nds32.c (nds32_elf_relax_loadstore): Remove the unused target features. (bfd_elf32_nds32_set_target_option): Remove the unused parameters. (nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12, nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls, nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff nds32_elf_relax_gotoff_suff, calculate_plt_memory_address, calculate_plt_offset, calculate_got_memory_address, nds32_elf_check_dup_relocs): Removed. All callers changed. * elf32-nds32.h: Remove the unused macros and defines. (elf_nds32_link_hash_table): Remove the unused variable. (bfd_elf32_nds32_set_target_option): Update prototype. (nds32_elf_ex9_init): Removed. * elf32-nds32.c (nds32_convert_32_to_16): Updated. * elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros to initialize array nds32_elf_howto_table in any order without lots of EMPTY_HOWTO. (nds32_reloc_map): Updated. * reloc.c: Add BFD_RELOC_NDS32_LSI. * bfd-in2.h: Regenerated. * bfd/libbfd.h: Regenerated. * elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI. (nds32_reloc_map): Likewise. (nds32_elf_relax_flsi): New function. (nds32_elf_relax_section): Support floating load/store relaxation. * elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset): New macro. (struct elf_nds32_link_hash_entry): New `offset_to_gp' field. (struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields. (elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard, nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym): New functions. (nds32_info_to_howto_rel): Add BFD_ASSERT. (bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc, nds32_elf_link_hash_table_create, nds32_elf_relocate_section, nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label, bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated. (nds32_elf_final_sda_base): Improve it to find the better gp value. (insert_nds32_elf_blank): Must consider `len' when inserting blanks. * elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype. (struct elf_nds32_link_hash_table): Add new variable `hyper_relax'. * elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function. (create_got_section): Likewise. (allocate_dynrelocs, nds32_elf_size_dynamic_sections, nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated. (nds32_elf_check_relocs): Fix the issue that the shared library may has TEXTREL entry in the dynamic section. (nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs since the TEXTREL issue is fixed in the nds32_elf_check_relocs. (nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ dynamic entry. (calculate_offset): Remove the unused parameter `pic_ext_target' and related codes. All callers changed. (elf_backend_dtrel_excludes_plt): Disable it temporarily since it will cause some errors for our test cases. * elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the generic object. * reloc.c: Add TLS relocations. * libbfd.h: Regenerated. * bfd-in2.h: Regenerated. * elf32-nds32.h (struct section_id_list_t): New. (elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New prototypes. (elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent): New macro. (nds32_insertion_sort, bfd_elf32_nds32_set_target_option, elf_nds32_link_hash_table): Updated. * elf32-nds32.c (enum elf_nds32_tls_type): New. (struct elf32_nds32_relax_group_t, struct relax_group_list_t): New. (elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type, fls, ones32, list_insert, list_insert_sibling, dump_chain, elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions. (elf_nds32_obj_tdata): Add new fields. (elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros. (nds32_elf_howto_table): Add TLS relocations. (nds32_reloc_map): Likewise. (nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections, nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info, nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option, nds32_elf_check_relocs, allocate_dynrelocs): Updated. (nds32_elf_relax_section): Call nds32_elf_unify_tls_model. (dtpoff_base): Rename it to `gottpof' and then update it. opcodes * nds32-asm.c (operand_fields): Remove the unused fields. (nds32_opcodes): Remove the unused instructions. * nds32-dis.c (nds32_ex9_info): Removed. (nds32_parse_opcode): Updated. (print_insn_nds32): Likewise. * nds32-asm.c (config.h, stdlib.h, string.h): New includes. (LEX_SET_FIELD, LEX_GET_FIELD): Update defines. (nds32_asm_init, build_operand_hash_table, build_keyword_hash_table, build_opcode_hash_table): New functions. (nds32_keyword_table, nds32_keyword_count_table, nds32_field_table, nds32_opcode_table): New. (hw_ktabs): Declare it to a pointer rather than an array. (build_hash_table): Removed. * nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT, SYN_ROPT and upadte HW_GPR and HW_INT. * nds32-dis.c (keywords): Remove const. (match_field): New function. (nds32_parse_opcode): Updated. * disassemble.c (disassemble_init_for_target): Add disassemble_init_nds32. * nds32-dis.c (eum map_type): New. (nds32_private_data): Likewise. (get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid, nds32_add_opcode_hash_table, disassemble_init_nds32): New functions. (print_insn_nds32): Updated. * nds32-asm.c (parse_aext_reg): Add new parameter. (parse_re, parse_re2, parse_aext_reg): Only reduced registers are allowed to use. All callers changed. * nds32-asm.c (keyword_usr, keyword_sr): Updated. (operand_fields): Add new fields. (nds32_opcodes): Add new instructions. (keyword_aridxi_mx): New keyword. * nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX and NASM_ATTR_ZOL. (ALU2_1, ALU2_2, ALU2_3): New macros. * nds32-dis.c (nds32_filter_unknown_insn): Updated.
2018-07-30Add support for the C_SKY series of processors.Andrew Jenner1-0/+1
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc. This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about. bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY. (BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise. * Makefile.in: Regenerated. * archures.c (enum bfd_architecture): Add bfd_arch_csky and related bfd_mach defines. (bfd_csky_arch): Declare. (bfd_archures_list): Add C-SKY. * bfd-in.h (elf32_csky_build_stubs): Declare. (elf32_csky_size_stubs): Declare. (elf32_csky_next_input_section: Declare. (elf32_csky_setup_section_lists): Declare. * bfd-in2.h: Regenerated. * config.bfd: Add C-SKY. * configure.ac: Likewise. * configure: Regenerated. * cpu-csky.c: New file. * elf-bfd.h (enum elf_target_id): Add C-SKY. * elf32-csky.c: New file. * libbfd.h: Regenerated. * reloc.c: Add C-SKY relocations. * targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare. (_bfd_target_vector): Add C-SKY target vector entries. binutils* readelf.c: Include elf/csky.h. (guess_is_rela): Handle EM_CSKY. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. include * dis-asm.h (csky_symbol_is_valid): Declare. * opcode/csky.h: New file. opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c. * Makefile.in: Regenerated. * configure.ac: Add C-SKY. * configure: Regenerated. * csky-dis.c: New file. * csky-opc.h: New file. * disassemble.c (ARCH_csky): Define. (disassembler, disassemble_init_for_target): Add case for ARCH_csky. * disassemble.h (print_insn_csky, csky_get_disassembler): Declare. gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY. (TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise. * Makefile.in: Regenerated. * config/tc-csky.c: New file. * config/tc-csky.h: New file. * config/te-csky_abiv1.h: New file. * config/te-csky_abiv1_linux.h: New file. * config/te-csky_abiv2.h: New file. * config/te-csky_abiv2_linux.h: New file. * configure.tgt: Add C-SKY. * doc/Makefile.am (CPU_DOCS): Add entry for C-SKY. * doc/Makefile.in: Regenerated. * doc/all.texi: Set CSKY feature. * doc/as.texi (Overview): Add C-SKY options. (Machine Dependencies): Likewise. * doc/c-csky.texi: New file. * testsuite/gas/csky/*: New test cases. ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations. (ecskyelf.c, ecskyelf_linux.c): New rules. * Makefile.in: Regenerated. * configure.tgt: Add C-SKY. * emulparams/cskyelf.sh: New file. * emulparams/cskyelf_linux.sh: New file. * emultempl/cskyelf.em: New file. * gen-doc.texi: Add C-SKY. * ld.texi: Likewise. (Options specific to C-SKY targets): New section. * testsuite/ld-csky/*: New tests.
2018-07-02GDB PR tdep/8282: MIPS: Wire in `set disassembler-options'Maciej W. Rozycki1-6/+44
Implement MIPS target support for passing options to the disassembler, complementing commit 65b48a81404c ("GDB: Add support for the new set/show disassembler-options commands."). This includes options that expect an argument, so adjust the generic code and data structures used so as to handle such options. So as to give backends syntax flexibility no specific delimiter has been defined to separate options from their respective arguments, so it has to be included as the last character of the option name. Completion code however has not been adjusted and consequently option arguments cannot be completed at this time. Also the MIPS target has non-empty defaults for the options, so that ABI names for the general-purpose registers respect our `set mips abi ...' setting rather than always being determined from the ELF headers of the binary file selected. Handle these defaults as implicit options, never shown to the user and always prepended to the user-specified options, so that the latters can override the defaults. The resulting output for the MIPS target is as follows: (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: no-aliases Use canonical instruction forms. msa Recognize MSA instructions. virt Recognize the virtualization ASE instructions. xpa Recognize the eXtended Physical Address (XPA) ASE instructions. ginv Recognize the Global INValidate (GINV) ASE instructions. gpr-names=ABI Print GPR names according to specified ABI. Default: based on binary being disassembled. fpr-names=ABI Print FPR names according to specified ABI. Default: numeric. cp0-names=ARCH Print CP0 register names according to specified architecture. Default: based on binary being disassembled. hwr-names=ARCH Print HWR names according to specified architecture. Default: based on binary being disassembled. reg-names=ABI Print GPR and FPR names according to specified ABI. reg-names=ARCH Print CP0 register and HWR names according to specified architecture. For the options above, the following values are supported for "ABI": numeric 32 n32 64 For the options above, the following values are supported for "ARCH": numeric r3000 r3900 r4000 r4010 vr4100 vr4111 vr4120 r4300 r4400 r4600 r4650 r5000 vr5400 vr5500 r5900 r6000 rm7000 rm9000 r8000 r10000 r12000 r14000 r16000 mips5 mips32 mips32r2 mips32r3 mips32r5 mips32r6 mips64 mips64r2 mips64r3 mips64r5 mips64r6 interaptiv-mr2 sb1 loongson2e loongson2f loongson3a octeon octeon+ octeon2 octeon3 xlr xlp (gdb) which corresponds to what `objdump --help' used to print for the MIPS target, with minor formatting changes, most notably option argument lists being wrapped, but also the amount of white space separating options from the respective descriptions. The relevant part the new code is now also used by `objdump --help', which means these formatting changes apply to both outputs, except for argument list wrapping, which is GDB-specific. This also adds a separating new line between the heading and option lists where descriptions are provided, hence: (gdb) set architecture s390:31-bit (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: esa Disassemble in ESA architecture mode zarch Disassemble in z/Architecture mode insnlength Print unknown instructions according to length from first two bits (gdb) but: (gdb) set architecture powerpc:common (gdb) show disassembler-options The current disassembler options are '' The following disassembler options are supported for use with the 'set disassembler-options <option>[,<option>...]' command: 403, 405, 440, 464, 476, 601, 603, 604, 620, 7400, 7410, 7450, 7455, 750cl, 821, 850, 860, a2, altivec, any, booke, booke32, cell, com, e200z4, e300, e500, e500mc, e500mc64, e5500, e6500, e500x2, efs, efs2, power4, power5, power6, power7, power8, power9, ppc, ppc32, 32, ppc64, 64, ppc64bridge, ppcps, pwr, pwr2, pwr4, pwr5, pwr5x, pwr6, pwr7, pwr8, pwr9, pwrx, raw, spe, spe2, titan, vle, vsx (gdb) Existing affected target backends have been adjusted accordingly. This has been verified manually with: (gdb) set architecture arm (gdb) set architecture powerpc:common (gdb) set architecture s390:31-bit to cause no issues with the `show disassembler-options' and `set disassembler-options' commands. A test case for the MIPS target has also been provided, covering the default settings with ABI overrides as well as disassembler option overrides. 2018-07-02 Maciej W. Rozycki <macro@mips.com> Simon Marchi <simon.marchi@polymtl.ca> include/ PR tdep/8282 * dis-asm.h (disasm_option_arg_t): New typedef. (disasm_options_and_args_t): Likewise. (disasm_options_t): Add `arg' member, document members. (disassembler_options_mips): New prototype. (disassembler_options_arm, disassembler_options_powerpc) (disassembler_options_s390): Update prototypes. opcodes/ PR tdep/8282 * mips-dis.c (mips_option_arg_t): New enumeration. (mips_options): New variable. (disassembler_options_mips): New function. (print_mips_disassembler_options): Reimplement in terms of `disassembler_options_mips'. * arm-dis.c (disassembler_options_arm): Adapt to using the `disasm_options_and_args_t' structure. * ppc-dis.c (disassembler_options_powerpc): Likewise. * s390-dis.c (disassembler_options_s390): Likewise. gdb/ PR tdep/8282 * disasm.h (gdb_disassembler): Add `m_disassembler_options_holder'. member * disasm.c (get_all_disassembler_options): New function. (gdb_disassembler::gdb_disassembler): Use it. (gdb_buffered_insn_length_init_dis): Likewise. (gdb_buffered_insn_length): Adjust accordingly. (set_disassembler_options): Handle options with arguments. (show_disassembler_options_sfunc): Likewise. Add a leading new line if showing options with descriptions. (disassembler_options_completer): Adapt to using the `disasm_options_and_args_t' structure. * mips-tdep.c (mips_disassembler_options): New variable. (mips_disassembler_options_o32): Likewise. (mips_disassembler_options_n32): Likewise. (mips_disassembler_options_n64): Likewise. (gdb_print_insn_mips): Don't set `disassembler_options'. (gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove functions. (mips_gdbarch_init): Always set `gdbarch_print_insn' to `gdb_print_insn_mips'. Set `gdbarch_disassembler_options', `gdbarch_disassembler_options_implicit' and `gdbarch_valid_disassembler_options'. * arm-tdep.c (_initialize_arm_tdep): Adapt to using the `disasm_options_and_args_t' structure. * gdbarch.sh (disassembler_options_implicit): New `gdbarch' method. (valid_disassembler_options): Switch from `disasm_options_t' to the `disasm_options_and_args_t' structure. * NEWS: Document `set disassembler-options' support for the MIPS target. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. gdb/doc/ PR tdep/8282 * gdb.texinfo (Source and Machine Code): Document `set disassembler-options' support for the MIPS target. gdb/testsuite/ PR tdep/8282 * gdb.arch/mips-disassembler-options.exp: New test. * gdb.arch/mips-disassembler-options.s: New test source.
2018-04-30This patch adds support to objdump for disassembly of NFP (Netronome Flow ↵Francois H. Theron1-0/+1
Processor) ELF files (.nffw) as well as some basic readelf support. bfd * Makefile.am: Added NFP files to build. * archures.c: Added bfd_arch_nfp * config.bfd: Added NFP support. * configure.ac: Added NFP support. * cpu-nfp.c: New, for NFP support. * elf-bfd.h: Added elf_section_info() * elf64-nfp.c: New, for NFP support. * po/SRC-POTFILES.in: Added NFP source files. * targets.c: Added nfp_elf64_vec * bfd-in2.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils* readelf.c: Very basic support for EM_NFP and its section types. * testsuite/binutils-all/nfp: New directory. * testsuite/binutils-all/nfp/objdump.exp: New file. Run new tests. * testsuite/binutils-all/nfp/test2_ctx8.d: New file. * testsuite/binutils-all/nfp/test2_no-pc_ctx4.d: New file. * testsuite/binutils-all/nfp/test1.d: New file. * testsuite/binutils-all/nfp/nfp6000.nffw: New file. * testsuite/binutils-all/nfp/test2_nfp6000.nffw: New file. * NEWS: Mention the new support. include * dis-asm.h: Added print_nfp_disassembler_options prototype. * elf/common.h: Added EM_NFP, officially assigned. See Google Group Generic System V Application Binary Interface. * elf/nfp.h: New, for NFP support. * opcode/nfp.h: New, for NFP support. opcodes Makefile.am: Added nfp-dis.c. configure.ac: Added bfd_nfp_arch. disassemble.h: Added print_insn_nfp prototype. disassemble.c: Added ARCH_nfp and call to print_insn_nfp nfp-dis.c: New, for NFP support. po/POTFILES.in: Added nfp-dis.c to the list. Makefile.in: Regenerate. configure: Regenerate.
2018-04-16Remove sh5 and sh64 supportAlan Modra1-1/+0
include/ * dis-asm.h: Remove sh5 and sh64 support. bfd/ * Makefile.am: Remove sh5 and sh64 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-sh.c: Likewise. * elf32-sh-relocs.h: Likewise. * elf32-sh.c: Likewise. * targets.c: Likewise. * elf32-sh64-com.c: Delete. * elf32-sh64.c: Delete. * elf32-sh64.h: Delete. * elf64-sh64.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove sh5 and sh64 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Delete. * sh64-opc.c: Delete. * sh64-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. bintuils/ * testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support. gas/ * Makefile.am: Remove sh5 and sh64 support. * config/tc-sh.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/cfi/cfi.exp: Likewise. * testsuite/gas/sh/basic.exp: Likewise. * config/tc-sh64.c: Delete. * config/tc-sh64.h: Delete. * doc/c-sh64.texi: Delete. * testsuite/gas/sh/sh64/abi-32.d: Delete. * testsuite/gas/sh/sh64/abi-32.s: Delete. * testsuite/gas/sh/sh64/abi-64.d: Delete. * testsuite/gas/sh/sh64/abi-64.s: Delete. * testsuite/gas/sh/sh64/basic-1.d: Delete. * testsuite/gas/sh/sh64/basic-1.s: Delete. * testsuite/gas/sh/sh64/case-1.d: Delete. * testsuite/gas/sh/sh64/case-1.s: Delete. * testsuite/gas/sh/sh64/case-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange1-1.d: Delete. * testsuite/gas/sh/sh64/crange1-2.d: Delete. * testsuite/gas/sh/sh64/crange1.s: Delete. * testsuite/gas/sh/sh64/crange2-1.d: Delete. * testsuite/gas/sh/sh64/crange2-2.d: Delete. * testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange2.s: Delete. * testsuite/gas/sh/sh64/crange3-1.d: Delete. * testsuite/gas/sh/sh64/crange3.s: Delete. * testsuite/gas/sh/sh64/crange4-1.d: Delete. * testsuite/gas/sh/sh64/crange4.s: Delete. * testsuite/gas/sh/sh64/crange5-1.d: Delete. * testsuite/gas/sh/sh64/crange5.s: Delete. * testsuite/gas/sh/sh64/creg-1.d: Delete. * testsuite/gas/sh/sh64/creg-1.s: Delete. * testsuite/gas/sh/sh64/creg-2.d: Delete. * testsuite/gas/sh/sh64/creg-2.s: Delete. * testsuite/gas/sh/sh64/datal-1.s: Delete. * testsuite/gas/sh/sh64/datal-2.d: Delete. * testsuite/gas/sh/sh64/datal-2.s: Delete. * testsuite/gas/sh/sh64/datal-3.s: Delete. * testsuite/gas/sh/sh64/datal32-1.d: Delete. * testsuite/gas/sh/sh64/datal32-3.d: Delete. * testsuite/gas/sh/sh64/datal64-1.d: Delete. * testsuite/gas/sh/sh64/datal64-3.d: Delete. * testsuite/gas/sh/sh64/eh-1.d: Delete. * testsuite/gas/sh/sh64/eh-1.s: Delete. * testsuite/gas/sh/sh64/endian-1.d: Delete. * testsuite/gas/sh/sh64/endian-1.s: Delete. * testsuite/gas/sh/sh64/endian-2.d: Delete. * testsuite/gas/sh/sh64/endian-2.s: Delete. * testsuite/gas/sh/sh64/err-1.s: Delete. * testsuite/gas/sh/sh64/err-2.s: Delete. * testsuite/gas/sh/sh64/err-3.s: Delete. * testsuite/gas/sh/sh64/err-4.s: Delete. * testsuite/gas/sh/sh64/err-abi-32.s: Delete. * testsuite/gas/sh/sh64/err-abi-64.s: Delete. * testsuite/gas/sh/sh64/err-dsp.s: Delete. * testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete. * testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt-1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete. * testsuite/gas/sh/sh64/err-ptb-1.s: Delete. * testsuite/gas/sh/sh64/err-ptb-2.s: Delete. * testsuite/gas/sh/sh64/err.exp: Delete. * testsuite/gas/sh/sh64/immexpr1.s: Delete. * testsuite/gas/sh/sh64/immexpr2.s: Delete. * testsuite/gas/sh/sh64/immexpr32-1.d: Delete. * testsuite/gas/sh/sh64/immexpr32-2.d: Delete. * testsuite/gas/sh/sh64/immexpr64-1.d: Delete. * testsuite/gas/sh/sh64/immexpr64-2.d: Delete. * testsuite/gas/sh/sh64/lineno.d: Delete. * testsuite/gas/sh/sh64/lineno.s: Delete. * testsuite/gas/sh/sh64/localcom-1.d: Delete. * testsuite/gas/sh/sh64/localcom-1.s: Delete. * testsuite/gas/sh/sh64/mix-1.d: Delete. * testsuite/gas/sh/sh64/mix-1.s: Delete. * testsuite/gas/sh/sh64/mix-noexp-1.d: Delete. * testsuite/gas/sh/sh64/movi-1.s: Delete. * testsuite/gas/sh/sh64/movi-2.s: Delete. * testsuite/gas/sh/sh64/movi-3.d: Delete. * testsuite/gas/sh/sh64/movi-3.s: Delete. * testsuite/gas/sh/sh64/movi32-1.d: Delete. * testsuite/gas/sh/sh64/movi32-2.d: Delete. * testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/movi64-1.d: Delete. * testsuite/gas/sh/sh64/movi64-2.d: Delete. * testsuite/gas/sh/sh64/movi64-2.s: Delete. * testsuite/gas/sh/sh64/movi64-3.d: Delete. * testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt-1.d: Delete. * testsuite/gas/sh/sh64/pt-1.s: Delete. * testsuite/gas/sh/sh64/pt-2.s: Delete. * testsuite/gas/sh/sh64/pt-noexp-1.d: Delete. * testsuite/gas/sh/sh64/pt32-1.d: Delete. * testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt64-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-2.d: Delete. * testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/ptc-1.s: Delete. * testsuite/gas/sh/sh64/ptc32-1.d: Delete. * testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext-1.s: Delete. * testsuite/gas/sh/sh64/ptext32-1.d: Delete. * testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/rel-1.s: Delete. * testsuite/gas/sh/sh64/rel-2.s: Delete. * testsuite/gas/sh/sh64/rel-3.s: Delete. * testsuite/gas/sh/sh64/rel-4.s: Delete. * testsuite/gas/sh/sh64/rel-5.s: Delete. * testsuite/gas/sh/sh64/rel32-1.d: Delete. * testsuite/gas/sh/sh64/rel32-2.d: Delete. * testsuite/gas/sh/sh64/rel32-3.d: Delete. * testsuite/gas/sh/sh64/rel32-4.d: Delete. * testsuite/gas/sh/sh64/rel32-5.d: Delete. * testsuite/gas/sh/sh64/rel64-1.d: Delete. * testsuite/gas/sh/sh64/rel64-2.d: Delete. * testsuite/gas/sh/sh64/rel64-3.d: Delete. * testsuite/gas/sh/sh64/rel64-4.d: Delete. * testsuite/gas/sh/sh64/rel64-5.d: Delete. * testsuite/gas/sh/sh64/relax-1.d: Delete. * testsuite/gas/sh/sh64/relax-1.s: Delete. * testsuite/gas/sh/sh64/relax-2.d: Delete. * testsuite/gas/sh/sh64/relax-2.s: Delete. * testsuite/gas/sh/sh64/relax-3.d: Delete. * testsuite/gas/sh/sh64/relax-3.s: Delete. * testsuite/gas/sh/sh64/sh64.exp: Delete. * testsuite/gas/sh/sh64/shift-1.s: Delete. * testsuite/gas/sh/sh64/shift-2.s: Delete. * testsuite/gas/sh/sh64/shift-3.s: Delete. * testsuite/gas/sh/sh64/shift32-1.d: Delete. * testsuite/gas/sh/sh64/shift32-3.d: Delete. * testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete. * testsuite/gas/sh/sh64/shift64-1.d: Delete. * testsuite/gas/sh/sh64/shift64-2.d: Delete. * testsuite/gas/sh/sh64/shift64-3.d: Delete. * testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete. * testsuite/gas/sh/sh64/syntax-1.d: Delete. * testsuite/gas/sh/sh64/syntax-1.s: Delete. * testsuite/gas/sh/sh64/syntax-2.d: Delete. * testsuite/gas/sh/sh64/syntax-2.s: Delete. * testsuite/gas/sh/sh64/ua-1.s: Delete. * testsuite/gas/sh/sh64/ua32-1.d: Delete. * testsuite/gas/sh/sh64/ua64-1.d: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sh5 and sh64 support. * configure.tgt: Likewise. * ldlang.c: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-gc/pr13683.d: Likewise. * testsuite/ld-scripts/crossref.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-sh/ld-r-1.d: Likewise. * testsuite/ld-sh/rd-sh.exp: Likewise. * testsuite/ld-sh/sh.exp: Likewise. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/ld-undefined/undefined.exp: Likewise. * emulparams/shelf32.sh: Delete. * emulparams/shelf32_linux.sh: Delete. * emulparams/shelf32_nbsd.sh: Delete. * emulparams/shelf64.sh: Delete. * emulparams/shelf64_nbsd.sh: Delete. * emulparams/shlelf32.sh: Delete. * emulparams/shlelf32_linux.sh: Delete. * emulparams/shlelf32_nbsd.sh: Delete. * emulparams/shlelf64.sh: Delete. * emulparams/shlelf64_nbsd.sh: Delete. * emultempl/sh64elf.em: Delete. * testsuite/ld-sh/sh64/abi32.sd: Delete. * testsuite/ld-sh/sh64/abi32.xd: Delete. * testsuite/ld-sh/sh64/abi64.sd: Delete. * testsuite/ld-sh/sh64/abi64.xd: Delete. * testsuite/ld-sh/sh64/abixx-noexp.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.xd: Delete. * testsuite/ld-sh/sh64/crange-1.s: Delete. * testsuite/ld-sh/sh64/crange-2a.s: Delete. * testsuite/ld-sh/sh64/crange-2b.s: Delete. * testsuite/ld-sh/sh64/crange-2c.s: Delete. * testsuite/ld-sh/sh64/crange-2d.s: Delete. * testsuite/ld-sh/sh64/crange-2e.s: Delete. * testsuite/ld-sh/sh64/crange-2f.s: Delete. * testsuite/ld-sh/sh64/crange-2g.s: Delete. * testsuite/ld-sh/sh64/crange-2h.s: Delete. * testsuite/ld-sh/sh64/crange-2i.s: Delete. * testsuite/ld-sh/sh64/crange1.rd: Delete. * testsuite/ld-sh/sh64/crange2.rd: Delete. * testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete. * testsuite/ld-sh/sh64/crange3-media.rd: Delete. * testsuite/ld-sh/sh64/crange3.dd: Delete. * testsuite/ld-sh/sh64/crange3.rd: Delete. * testsuite/ld-sh/sh64/crangerel1.rd: Delete. * testsuite/ld-sh/sh64/crangerel2.rd: Delete. * testsuite/ld-sh/sh64/dlsection-1.s: Delete. * testsuite/ld-sh/sh64/dlsection.sd: Delete. * testsuite/ld-sh/sh64/endian.dbd: Delete. * testsuite/ld-sh/sh64/endian.dld: Delete. * testsuite/ld-sh/sh64/endian.ld: Delete. * testsuite/ld-sh/sh64/endian.s: Delete. * testsuite/ld-sh/sh64/endian.sbd: Delete. * testsuite/ld-sh/sh64/endian.sld: Delete. * testsuite/ld-sh/sh64/gotplt.d: Delete. * testsuite/ld-sh/sh64/gotplt.map: Delete. * testsuite/ld-sh/sh64/gotplt.s: Delete. * testsuite/ld-sh/sh64/init-cmpct.d: Delete. * testsuite/ld-sh/sh64/init-media.d: Delete. * testsuite/ld-sh/sh64/init.s: Delete. * testsuite/ld-sh/sh64/init64.d: Delete. * testsuite/ld-sh/sh64/mix1-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix1.sd: Delete. * testsuite/ld-sh/sh64/mix1.xd: Delete. * testsuite/ld-sh/sh64/mix2-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix2.sd: Delete. * testsuite/ld-sh/sh64/mix2.xd: Delete. * testsuite/ld-sh/sh64/rd-sh64.exp: Delete. * testsuite/ld-sh/sh64/rel-1.s: Delete. * testsuite/ld-sh/sh64/rel-2.s: Delete. * testsuite/ld-sh/sh64/rel32.xd: Delete. * testsuite/ld-sh/sh64/rel64.xd: Delete. * testsuite/ld-sh/sh64/relax.exp: Delete. * testsuite/ld-sh/sh64/relax1.s: Delete. * testsuite/ld-sh/sh64/relax2.s: Delete. * testsuite/ld-sh/sh64/relax3.s: Delete. * testsuite/ld-sh/sh64/relax4.s: Delete. * testsuite/ld-sh/sh64/reldl-1.s: Delete. * testsuite/ld-sh/sh64/reldl-2.s: Delete. * testsuite/ld-sh/sh64/reldl32.rd: Delete. * testsuite/ld-sh/sh64/reldl64.rd: Delete. * testsuite/ld-sh/sh64/relfail.exp: Delete. * testsuite/ld-sh/sh64/relfail.s: Delete. * testsuite/ld-sh/sh64/sh64-1.s: Delete. * testsuite/ld-sh/sh64/sh64-2.s: Delete. * testsuite/ld-sh/sh64/sh64.exp: Delete. * testsuite/ld-sh/sh64/shcmp-1.s: Delete. * testsuite/ld-sh/sh64/shdl-1.s: Delete. * testsuite/ld-sh/sh64/shdl-2.s: Delete. * testsuite/ld-sh/sh64/shdl32.xd: Delete. * testsuite/ld-sh/sh64/shdl64.sd: Delete. * testsuite/ld-sh/sh64/shdl64.xd: Delete. * testsuite/ld-sh/sh64/shmix-1.s: Delete. * testsuite/ld-sh/sh64/shmix-2.s: Delete. * testsuite/ld-sh/sh64/shmix-3.s: Delete. * testsuite/ld-sh/sh64/stobin-0-dso.d: Delete. * testsuite/ld-sh/sh64/stobin-1.d: Delete. * testsuite/ld-sh/sh64/stobin.s: Delete. * testsuite/ld-sh/sh64/stolib.s: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-07-14binutils/objdump: Fix disassemble for huge elf sectionsRavi Bangoria1-1/+1
When elf section size is beyond unsigned int max value, objdump fails to disassemble from that section. Ex on PowerPC, $ objdump -h /proc/kcore Idx Name Size VMA 4 load2 100000000 c000000000000000 Here, size of load2 section is 0x100000000. Also note that, 0xc00.... address range is kernel space for PowerPC. Now let's try to disassemble do_sys_open() using /proc/kcore. $ cat /proc/kallsyms | grep -A1 -w do_sys_open c00000000036c000 T do_sys_open c00000000036c2d0 T SyS_open Before patch: $ objdump -d --start-address=0xc00000000036c000 --stop-address=0xc00000000036c2d0 /proc/kcore /proc/kcore: file format elf64-powerpcle Disassembly of section load2: c00000000036c000 <load2+0x36c000>: c00000000036c000: Address 0xc00000000036c000 is out of bounds. Fix this by changing type of 'buffer_length' from unsigned int to size_t. After patch: $ objdump -d --start-address=0xc00000000036c000 --stop-address=0xc00000000036c2d0 /proc/kcore /proc/kcore: file format elf64-powerpcle Disassembly of section load2: c00000000036c000 <load2+0x36c000>: c00000000036c000: fc 00 4c 3c addis r2,r12,252 c00000000036c004: 00 53 42 38 addi r2,r2,21248 c00000000036c008: a6 02 08 7c mflr r0 include/ * dis-asm.h (struct disassemble_info): Change type of buffer_length field to size_t. opcodes/ * dis-buf.c (buffer_read_memory): Change type of end_addr_offset, max_addr_offset and octets variables to size_t.
2017-06-14Don't use print_insn_XXX in GDBYao Qi1-8/+0
This is a follow-up to [PATCH 0/6] Unify the disassembler selection in gdb and objdump https://sourceware.org/ml/binutils/2017-05/msg00192.html that is, opcodes is able to select the right disassembler, so gdb doesn't have to select them. Instead, gdb can just use default_print_insn. As a result, these print_insn_XXX are not used out of opcodes, so this patch also moves their declarations from include/dis-asm.h to opcodes/disassemble.h. With this change, GDB doesn't use any print_insn_XXX directly any more. gdb: 2017-06-14 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_gdb_print_insn): Call default_print_insn instead of print_insn_aarch64. * arm-tdep.c (gdb_print_insn_arm): Call default_print_insn instead of print_insn_big_arm and print_insn_little_arm. * i386-tdep.c (i386_print_insn): Call default_print_insn instead of print_insn_i386. * ia64-tdep.c (ia64_print_insn): Call default_print_insn instead of print_insn_ia64. * mips-tdep.c (gdb_print_insn_mips): Call default_print_insn instead of print_insn_big_mips and print_insn_little_mips. * spu-tdep.c (gdb_print_insn_spu): Call default_print_insn instead of print_insn_spu. include: 2017-06-14 Yao Qi <yao.qi@linaro.org> * dis-asm.h (print_insn_aarch64): Move it to opcodes/disassemble.h. (print_insn_big_arm, print_insn_big_mips): Likewise. (print_insn_i386, print_insn_ia64): Likewise. (print_insn_little_arm, print_insn_little_mips): Likewise. (print_insn_spu): Likewise. opcodes: 2017-06-14 Yao Qi <yao.qi@linaro.org> * aarch64-dis.c: Include disassemble.h instead of dis-asm.h. * arm-dis.c: Likewise. * ia64-dis.c: Likewise. * mips-dis.c: Likewise. * spu-dis.c: Likewise. * disassemble.h (print_insn_aarch64): New declaration, moved from include/dis-asm.h. (print_insn_big_arm, print_insn_big_mips): Likewise. (print_insn_i386, print_insn_ia64): Likewise. (print_insn_little_arm, print_insn_little_mips): Likewise.
2017-05-24Move print_insn_XXX to an opcodes internal headerYao Qi1-78/+2
With the changes done in previous patches, print_insn_XXX functions don't have to be external visible out of opcodes, because both gdb and objdump select disassemblers through a single interface. This patch moves these print_insn_XXX declarations from include/dis-asm.h to opcodes/disassemble.h, which is a new header added by this patch. include: 2017-05-24 Yao Qi <yao.qi@linaro.org> * dis-asm.h: Move some function declarations to opcodes/disassemble.h. opcodes: 2017-05-24 Yao Qi <yao.qi@linaro.org> * alpha-dis.c: Include disassemble.h, don't include dis-asm.h. * avr-dis.c, bfin-dis.c, cr16-dis.c: Likewise. * crx-dis.c, d10v-dis.c, d30v-dis.c: Likewise. * disassemble.c, dlx-dis.c, epiphany-dis.c: Likewise. * fr30-dis.c, ft32-dis.c, h8300-dis.c, h8500-dis.c: Likewise. * hppa-dis.c, i370-dis.c, i386-dis.c: Likewise. * i860-dis.c, i960-dis.c, ip2k-dis.c: Likewise. * iq2000-dis.c, lm32-dis.c, m10200-dis.c: Likewise. * m10300-dis.c, m32r-dis.c, m68hc11-dis.c: Likewise. * m68k-dis.c, m88k-dis.c, mcore-dis.c: Likewise. * metag-dis.c, microblaze-dis.c, mmix-dis.c: Likewise. * moxie-dis.c, msp430-dis.c, mt-dis.c: * nds32-dis.c, nios2-dis.c, ns32k-dis.c: Likewise. * or1k-dis.c, pdp11-dis.c, pj-dis.c: Likewise. * ppc-dis.c, pru-dis.c, riscv-dis.c: Likewise. * rl78-dis.c, s390-dis.c, score-dis.c: Likewise. * sh-dis.c, sh64-dis.c, tic30-dis.c: Likewise. * tic4x-dis.c, tic54x-dis.c, tic6x-dis.c: Likewise. * tic80-dis.c, tilegx-dis.c, tilepro-dis.c: Likewise. * v850-dis.c, vax-dis.c, visium-dis.c: Likewise. * w65-dis.c, wasm32-dis.c, xc16x-dis.c: Likewise. * xgate-dis.c, xstormy16-dis.c, xtensa-dis.c: Likewise. * z80-dis.c, z8k-dis.c: Likewise. * disassemble.h: New file.
2017-05-24Refactor disassembler selectionYao Qi1-2/+6
Nowadays, opcodes/disassemble.c:disassembler selects the proper disassembler according to ABFD only. However, it actually selects disassemblers according to arch, mach, endianess, and abfd. This patch adds them to the parameters of disassembler, so that its caller can still select disassemblers in case that abfd is NULL (a typical case in GDB). There isn't any functionality change. binutils: 2017-05-24 Yao Qi <yao.qi@linaro.org> * objdump.c (disassemble_data): Caller update. include: 2017-05-24 Yao Qi <yao.qi@linaro.org> * dis-asm.h (disassembler): Update declaration. opcodes: 2017-05-24 Yao Qi <yao.qi@linaro.org> * disassemble.c (disassembler): Add arguments a, big and mach. Use them. sim/common: 2017-05-24 Yao Qi <yao.qi@linaro.org> * sim-trace.c (trace_disasm): Caller update.
2017-04-06Add support for disassembling WebAssembly opcodes.Pip Cet1-0/+3
include * dis-asm.h: Add prototypes for wasm32 disassembler. opcodes * Makefile.am: Add wasm32-dis.c. * configure.ac: Add wasm32-dis.c to wasm32 target. * disassemble.c: Add wasm32 disassembler code. * wasm32-dis.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. * po/opcodes.pot: Regenerate. gas * testsuite/gas/wasm32/allinsn.d: Adjust test for disassembler changes. * testsuite/gas/wasm32/disass.d: New test. * testsuite/gas/wasm32/disass.s: New test. * testsuite/gas/wasm32/disass-2.d: New test. * testsuite/gas/wasm32/disass-2.s: New test. * testsuite/gas/wasm32/reloc.d: Adjust test for changed reloc names. * testsuite/gas/wasm32/reloc.s: Update test for changed assembler syntax. * testsuite/gas/wasm32/wasm32.exp: Run new tests. Expect allinsn test to succeed.
2017-04-05-Wwrite-strings: Constify struct disassemble_info's disassembler_options fieldPedro Alves1-4/+4
The memory disassemble_info::disassembler_options points to is always owned by the client. I.e., that field is an non-owning, observing pointer. Thus const makes sense. Are the include/ and opcodes/ bits OK? Tested on x86_64 Fedora 23, built with --enable-targets=all. include/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * dis-asm.h (disassemble_info) <disassembler_options>: Now a "const char *". (next_disassembler_option): Constify. opcodes/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * arc-dis.c (parse_option, parse_disassembler_options): Constify. * arm-dis.c (parse_arm_disassembler_options): Constify. * ppc-dis.c (powerpc_init_dialect): Constify local. * vax-dis.c (parse_disassembler_options): Constify. gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * arm-tdep.c (show_disassembly_style_sfunc): Constify local. * disasm.c (set_disassembler_options): Constify local. * i386-tdep.c (i386_print_insn): Remove cast and FIXME comment.
2017-02-28GDB: Add support for the new set/show disassembler-options commands.Peter Bergner1-4/+37
This commit adds support to GDB so that it can modify the disassembler-options value that is passed to the disassembler, similar to objdump's -M option. Currently, the only supported targets are ARM, PowerPC and S/390, but adding support for a new target(s) is not difficult. include/ * dis-asm.h (disasm_options_t): New typedef. (parse_arm_disassembler_option): Remove prototype. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (get_arm_regname_num_options): Likewise. (disassemble_init_s390): New prototype. (disassembler_options_powerpc): Likewise. (disassembler_options_arm): Likewise. (disassembler_options_s390): Likewise. (remove_whitespace_and_extra_commas): Likewise. (disassembler_options_cmp): Likewise. (next_disassembler_option): New inline function. (FOR_EACH_DISASSEMBLER_OPTION): New macro. opcodes/ * disassemble.c Include "safe-ctype.h". (disassemble_init_for_target): Handle s390 init. (remove_whitespace_and_extra_commas): New function. (disassembler_options_cmp): Likewise. * arm-dis.c: Include "libiberty.h". (NUM_ELEM): Delete. (regnames): Use long disassembler style names. Add force-thumb and no-force-thumb options. (NUM_ARM_REGNAMES): Rename from this... (NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE. (get_arm_regname_num_options): Delete. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (parse_disassembler_options): Likewise. (parse_arm_disassembler_option): Rename from this... (parse_arm_disassembler_options): ...to this. Make static. Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options. (print_insn): Use parse_arm_disassembler_options. (disassembler_options_arm): New function. (print_arm_disassembler_options): Handle updated regnames. * ppc-dis.c: Include "libiberty.h". (ppc_opts): Add "32" and "64" entries. (ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp. (powerpc_init_dialect): Add break to switch statement. Use new FOR_EACH_DISASSEMBLER_OPTION macro. (disassembler_options_powerpc): New function. (print_ppc_disassembler_options): Use ARRAY_SIZE. Remove printing of "32" and "64". * s390-dis.c: Include "libiberty.h". (init_flag): Remove unneeded variable. (struct s390_options_t): New structure type. (options): New structure. (init_disasm): Rename from this... (disassemble_init_s390): ...to this. Add initializations for current_arch_mask and option_use_insn_len_bits_p. Remove init_flag. (print_insn_s390): Delete call to init_disasm. (disassembler_options_s390): New function. (print_s390_disassembler_options): Print using information from struct 'options'. * po/opcodes.pot: Regenerate. binutils/ * objdump.c (main): Use remove_whitespace_and_extra_commas. gdb/ * NEWS: Mention new set/show disassembler-options commands. * doc/gdb.texinfo: Document new set/show disassembler-options commands. * disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h". (prospective_options): New static variable. (gdb_disassembler::gdb_disassembler): Initialize m_di.disassembler_options. (gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options. (get_disassembler_options): New function. (set_disassembler_options): Likewise. (set_disassembler_options_sfunc): Likewise. (show_disassembler_options_sfunc): Likewise. (disassembler_options_completer): Likewise. (_initialize_disasm): Likewise. * disasm.h (get_disassembler_options): New prototype. (set_disassembler_options): Likewise. * gdbarch.sh (gdbarch_disassembler_options): New variable. (gdbarch_verify_disassembler_options): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * arm-tdep.c (num_disassembly_options): Delete. (set_disassembly_style): Likewise. (arm_disassembler_options): New static variable. (set_disassembly_style_sfunc): Convert short style name into long option name. Call set_disassembler_options. (show_disassembly_style_sfunc): New function. (arm_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. (_initialize_arm_tdep): Delete regnames variable and update callers. (arm_disassembler_options): Initialize. (disasm_options): New variable. (num_disassembly_options): Rename from this... (num_disassembly_styles): ...to this. Compute by scanning through disasm_options. (valid_disassembly_styles): Initialize using disasm_options. Remove calls to parse_arm_disassembler_option, get_arm_regnames and set_arm_regname_option. Pass show_disassembly_style_sfunc to the "disassembler" setshow command. * rs6000-tdep.c (powerpc_disassembler_options): New static variable. (rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. * s390-tdep.c (s390_disassembler_options): New static variable. (s390_gdbarch_init):all set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. gdb/testsuite/ * gdb.arch/powerpc-power.exp: Delete test. * gdb.arch/powerpc-power.s: Likewise. * gdb.disasm/disassembler-options.exp: New test. * gdb.arch/powerpc-altivec.exp: Likewise. * gdb.arch/powerpc-altivec.s: Likewise. * gdb.arch/powerpc-altivec2.exp: Likewise. * gdb.arch/powerpc-altivec2.s: Likewise. * gdb.arch/powerpc-altivec3.exp: Likewise. * gdb.arch/powerpc-altivec3.s: Likewise. * gdb.arch/powerpc-power7.exp: Likewise. * gdb.arch/powerpc-power7.s: Likewise. * gdb.arch/powerpc-power8.exp: Likewise. * gdb.arch/powerpc-power8.s: Likewise. * gdb.arch/powerpc-power9.exp: Likewise. * gdb.arch/powerpc-power9.s: Likewise. * gdb.arch/powerpc-vsx.exp: Likewise. * gdb.arch/powerpc-vsx.s: Likewise. * gdb.arch/powerpc-vsx2.exp: Likewise. * gdb.arch/powerpc-vsx2.s: Likewise. * gdb.arch/powerpc-vsx3.exp: Likewise. * gdb.arch/powerpc-vsx3.s: Likewise. * gdb.arch/arm-disassembler-options.exp: Likewise. * gdb.arch/powerpc-disassembler-options.exp: Likewise. * gdb.arch/s390-disassembler-options.exp: Likewise.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-12-31PRU BFD supportDimitar Dimitrov1-0/+1
include/ * elf/common.h: Add PRU ELF. * elf/pru.h: New file. * opcode/pru.h: New file. * dis-asm.h (print_insn_pru): Declare. bfd/ * archures.c: Add bfd_arch_pru. * Makefile.am: Add PRU target. * config.bfd: Ditto. * configure.ac: Ditto. * elf-bfd.h (enum elf_target_id): Add PRU_ELF_DATA. * targets.c: Add pru_elf32_vec. * reloc.c: Add PRU relocations. * cpu-pru.c: New file. * elf32-pru.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. * bfd-in2.h: Regenerate * libbfd.h: Regenerate. Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
2016-11-01Add support for RISC-V architecture.Nick Clifton1-0/+2
bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf. * config.bdf: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * archures.c: Add bfd_riscv_arch. * reloc.c: Add riscv relocs. * targets.c: Add riscv_elf32_vec and riscv_elf64_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id. * elfnn-riscv.c: New file. * elfxx-riscv.c: New file. * elfxx-riscv.h: New file. binutils* readelf.c (guess_is_rela): Add EM_RISCV. (get_machine_name): Likewise. (dump_relocations): Add support for riscv relocations. (get_machine_flags): Add support for riscv flags. (is_32bit_abs_reloc): Add R_RISCV_32. (is_64bit_abs_reloc): Add R_RISCV_64. (is_none_reloc): Add R_RISCV_NONE. * testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv. Expect the debug_ranges test to fail. gas * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this architecture. * configure.in: Define a default architecture. * configure: Regenerate. * configure.tgt: Add entries for riscv. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Expect the redef tests to fail. * testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail. * config/tc-riscv.c: New file. * config/tc-riscv.h: New file. * doc/c-riscv.texi: New file. * testsuite/gas/riscv: New directory. * testsuite/gas/riscv/riscv.exp: New file. * testsuite/gas/riscv/t_insns.d: New file. * testsuite/gas/riscv/t_insns.s: New file. ld * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this target. * configure.tgt: Add riscv entries. * emulparams/elf32lriscv-defs.sh: New file. * emulparams/elf32lriscv.sh: New file. * emulparams/elf64lriscv-defs.sh: New file. * emulparams/elf64lriscv.sh: New file. * emultempl/riscvelf.em: New file. opcodes * configure.ac: Add entry for bfd_riscv_arch. * configure: Regenerate. * disassemble.c (disassembler): Add support for riscv. (disassembler_usage): Likewise. * riscv-dis.c: New file. * riscv-opc.c: New file. include * dis-asm.h: Add prototypes for print_insn_riscv and print_riscv_disassembler_options. * elf/riscv.h: New file. * opcode/riscv-opc.h: New file. * opcode/riscv.h: New file.
2016-07-20Add support to the ARC disassembler for selecting instruction classes.Claudiu Zissulescu1-0/+1
gas * testsuite/gas/arc/dsp.d: New file. * testsuite/gas/arc/dsp.s: Likewise. * testsuite/gas/arc/fpu.d: Likewise. * testsuite/gas/arc/fpu.s: Likewise. * testsuite/gas/arc/ext2op.d: Add specific disassembler option. * testsuite/gas/arc/ext3op.d: Likewise. * testsuite/gas/arc/tdpfp.d: Likewise. * testsuite/gas/arc/tfpuda.d: Likewise. opcodes * arc-dis.c (skipclass): New structure. (decodelist): New variable. (is_compatible_p): New function. (new_element): Likewise. (skip_class_p): Likewise. (find_format_from_table): Use skip_class_p function. (find_format): Decode first the extension instructions. (print_insn_arc): Select either ARCEM or ARCHS based on elf e_flags. (parse_option): New function. (parse_disassembler_options): Likewise. (print_arc_disassembler_options): Likewise. (print_insn_arc): Use parse_disassembler_options function. Proper select ARCv2 cpu variant. * disassemble.c (disassembler_usage): Add ARC disassembler options. binutils* doc/binutils.texi (objdump): Add ARC disassembler options. * testsuite/binutils-all/arc/dsp.s: New file. * testsuite/binutils-all/arc/objdump.exp: Likewise. include * dis-asm.h: Declare print_arc_disassembler_options.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-10-07New ARC implementation.Nick Clifton1-1/+1
bfd * archures.c: Remove support for older ARC. Added support for new ARC cpus (ARC600, ARC601, ARC700, ARCV2). * bfd-in2.h: Likewise. * config.bfd: Likewise. * cpu-arc.c: Likewise. * elf32-arc.c: Totally changed file with a refactored inplementation of the ARC port. * libbfd.h: Added ARC specific relocation types. * reloc.c: Likewise. gas * config/tc-arc.c: Revamped file for ARC support. * config/tc-arc.h: Likewise. * doc/as.texinfo: Add new ARC options. * doc/c-arc.texi: Likewise. ld * configure.tgt: Added target arc-*-elf* and arc*-*-linux-uclibc*. * emulparams/arcebelf_prof.sh: New file * emulparams/arcebelf.sh: Likewise. * emulparams/arceblinux_prof.sh: Likewise. * emulparams/arceblinux.sh: Likewise. * emulparams/arcelf_prof.sh: Likewise. * emulparams/arcelf.sh: Likewise. * emulparams/arclinux_prof.sh: Likewise. * emulparams/arclinux.sh: Likewise. * emulparams/arcv2elfx.sh: Likewise. * emulparams/arcv2elf.sh: Likewise. * emultempl/arclinux.em: Likewise. * scripttempl/arclinux.sc: Likewise. * scripttempl/elfarc.sc: Likewise. * scripttempl/elfarcv2.sc: Likewise * Makefile.am: Add new ARC emulations. * Makefile.in: Regenerate. * NEWS: Mention the new feature. opcodes * arc-dis.c: Revamped file for ARC support * arc-dis.h: Likewise. * arc-ext.c: Likewise. * arc-ext.h: Likewise. * arc-opc.c: Likewise. * arc-fxi.h: New file. * arc-regs.h: Likewise. * arc-tbl.h: Likewise. binutils * readelf.c (get_machine_name): Remove A5 reference. Add ARCompact and ARCv2. (get_machine_flags): Handle EM_ARCV2 and EM_ARCOMPACT. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_16bit_abs_reloc): Likewise. (is_none_reloc): Likewise. * NEWS: Mention the new feature. include * dis-asm.h (arc_get_disassembler): Correct declaration. * arc-reloc.def: Macro file with definition of all relocation types. * arc.h: Changed macros for the newly supported ARC cpus. Altered enum defining the supported relocations. * common.h: Changed EM_ARC_A5 definition to EM_ARC_COMPACT. Added macro for EM_ARC_COMPACT2. * arc-func.h: New file. * arc.h: Likewise.
2015-06-22Stop "objdump -d" from disassembling past a symbolic address.Nick Clifton1-0/+8
include * dis-asm.h (struct disassemble_info): Add stop_vma field. binuti * objdump.c (disassemble_bytes): Set the stop_vma field in the disassemble_info structure when disassembling code sections with -d. * doc/binutils.texi (objdump): Document the discrepancy between -d and -D. opcodes * dis-buf.c (buffer_read_memory): Fail is stop_vma is set and the requested region lies beyond it. * bfin-dis.c (print_insn_bfin): Ignore sysop instructions when looking for 32-bit insns. * mcore-dis.c (print_insn_mcore): Disable stop_vma when reading data. * sh-dis.c (print_insn_sh): Likewise. * tic6x-dis.c (print_insn_tic6x): Disable stop_vma when reading blocks of instructions. * vax-dis.c (print_insn_vax): Check that the requested address does not clash with the stop_vma. tests * gas/arm/backslash-at.s: Add extra .byte directives so that the foo symbol does not appear to point half way through an instruction. * gas/arm/backslash-at.d: Update expected disassembly. * gas/i386/ilp32/x86-64-opcode-inval-intel.d: Likewise. * gas/i386/ilp32/x86-64-opcode-inval.d: Likewise. * gas/i386/x86-64-opcode-inval-intel.d: Likewise. * gas/i386/x86-64-opcode-inval.d: Likewise.
2015-04-30Make RL78 disassembler and simulator respect ISA for mul/divDJ Delorie1-0/+4
[gas] * config/rl78-defs.h (rl78_isa_g10): New. (rl78_isa_g13): New. (rl78_isa_g14): New. * config/rl78-parse.y (ISA_G10): New. (ISA_G13): New. (ISA_G14): New. (MULHU, MULH, MULU, DIVHU, DIVWU, MACHU, MACH): Use them. * config/tc-rl78.c (rl78_isa_g10): New. (rl78_isa_g13): New. (rl78_isa_g14): New. [gdb] * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to rl78_decode_opcode [include] * dis-asm.h (print_insn_rl78_g10): New. (print_insn_rl78_g13): New. (print_insn_rl78_g14): New. (rl78_get_disassembler): New. * opcode/rl78.h (RL78_Dis_Isa): New. (rl78_decode_opcode): Add ISA parameter. [opcodes] * disassemble.c (disassembler): Choose suitable disassembler based on E_ABI. * rl78-decode.opc (rl78_decode_opcode): Take ISA parameter. Use it to decode mul/div insns. * rl78-decode.c: Regenerate. * rl78-dis.c (print_insn_rl78): Rename to... (print_insn_rl78_common): ...this, take ISA parameter. (print_insn_rl78): New. (print_insn_rl78_g10): New. (print_insn_rl78_g13): New. (print_insn_rl78_g14): New. (rl78_get_disassembler): New. [sim] * rl78/cpu.c (g14_multiply): New. * rl78/cpu.h (g14_multiply): New. * rl78/load.c (rl78_load): Decode ISA completely. * rl78/main.c (main): Expand -M to include other ISAs. * rl78/rl78.c (decode_opcode): Decode based on ISA. * rl78/trace.c (rl78_disasm_fn): New. (sim_disasm_init): Reset it. (sim_disasm_one): Get correct disassembler for ISA.
2015-01-28FT32 initial supportAlan Modra1-0/+1
FT32 is a new 32-bit RISC core developed by FTDI for embedded applications. * configure.ac: Add FT32 support. * configure: Regenerate. bfd/ * Makefile.am: Add FT32 files. * archures.c (enum bfd_architecture): Add bfd_arch_ft32. (bfd_mach_ft32): Define. (bfd_ft32_arch): Declare. (bfd_archures_list): Add bfd_ft32_arch. * config.bfd: Handle FT32. * configure.ac: Likewise. * cpu-ft32.c: New file. * elf32-ft32.c: New file. * reloc.c (BFD_RELOC_FT32_10, BFD_RELOC_FT32_20, BFD_RELOC_FT32_17, BFD_RELOC_FT32_18): Define. * targets.c (_bfd_target_vector): Add ft32_elf32_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * readelf.c: Add FT32 support. gas/ * Makefile.am: Add FT32 files. * config/tc-ft32.c: New file. * config/tc-ft32.h: New file. * configure.tgt: Add FT32 support. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/testsuite/ * gas/ft32/ft32.exp: New file. * gas/ft32/insn.d: New file. * gas/ft32/insn.s: New file. include/ * dis-asm.h (print_insn_ft32): Declare. include/elf/ * common.h (EM_FT32): Define. * ft32.h: New file. include/opcode/ * ft32.h: New file. ld/ * Makefile.am: Add FT32 files. * configure.tgt: Handle FT32 target. * emulparams/elf32ft32.sh: New file. * scripttempl/ft32.sc: New file. * Makefile.in: Regenerate. opcodes/ * Makefile.am: Add FT32 files. * configure.ac: Handle FT32. * disassemble.c (disassembler): Call print_insn_ft32. * ft32-dis.c: New file. * ft32-opc.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1