Age | Commit message (Collapse) | Author | Files | Lines |
|
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
|
|
Also add $(AM_V_xxx) to various manual rules in here.
|
|
Use the pattern from other projects where we generate the html pages
in a dir named the same as the project. So now we have:
gas/doc/gas.html - single html page
gas/doc/gas/ - multiple html pages
This works for projects that have a doc/ subdir already, but gprof &
ld require a little tweaking since they generate their docs in their
respective toplevels.
|
|
This better matches other GNU projects like autoconf/automake where
the html manual is the single page form. We'll support the multi-page
form in a follow up change.
|
|
|
|
GDB currently doesn't build on 32-bit Solaris:
* On Solaris 11.4/x86:
In file included from /usr/include/sys/procfs.h:26,
from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24:
/usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment"
#error "Cannot use procfs in the large file compilation environment"
^~~~~
* On Solaris 11.3/x86 there are several more instances of this.
The interaction between procfs and large-file support historically has
been a royal mess on Solaris:
* There are two versions of the procfs interface:
** The old ioctl-based /proc, deprecated and not used any longer in
either gdb or binutils.
** The `new' (introduced in Solaris 2.6, 1997) structured /proc.
* There are two headers one can possibly include:
** <procfs.h> which only provides the structured /proc, definining
_STRUCTURED_PROC=1 and then including ...
** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based
/proc, but provides structured /proc if _STRUCTURED_PROC == 1.
* procfs and the large-file environment didn't go well together:
** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit
compilations when the large-file environment was active
(_FILE_OFFSET_BITS == 64).
** In both Solaris 11.4 and Illumos, this restriction was lifted for
structured /proc.
So one has to be careful always to define _STRUCTURED_PROC=1 when
testing for or using <sys/procfs.h> on Solaris. As the errors above
show, this isn't always the case in binutils-gdb right now.
Also one may need to disable large-file support for 32-bit compilations
on Solaris. config/largefile.m4 meant to do this by wrapping the
AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding
ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because
it neglects the _STRUCTURED_PROC part.
To make things even worse, since GCC 9 g++ predefines
_FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to
enable large-file support, this has no effect, breaking the gdb build.
This patch addresses all this as follows:
* All tests for the <sys/procfs.h> header are made with
_STRUCTURED_PROC=1, the definition going into the various config.h
files instead of having to make them (and sometimes failing) in the
affected sources.
* To cope with the g++ predefine of _FILE_OFFSET_BITS=64,
-U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had
been far easier to have just
#undef _FILE_OFFSET_BITS
in config.h, but unfortunately such a construct in config.in is
commented by config.status irrespective of indentation and whitespace
if large-file support is disabled. I found no way around this and
putting the #undef in several global headers for bfd, binutils, ld,
and gdb seemed way more invasive.
* Last, the applicability check in largefile.m4 was modified only to
disable largefile support if really needed. To do so, it checks if
<sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it
doesn't, the disabling only happens if gdb exists in-tree and isn't
disabled, otherwise (building binutils from a tarball), there's no
conflict.
What initially confused me was the check for $plugins here, which
originally caused the disabling not to take place. Since AC_PLUGINGS
does enable plugin support if <dlfcn.h> exists (which it does on
Solaris), the disabling never happened.
I could find no explanation why the linker plugin needs large-file
support but thought it would be enough if gld and GCC's lto-plugin
agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not
enough: lto-plugin uses the simple-object interface from libiberty,
which includes off_t arguments. So to fully disable large-file
support would mean also disabling it in libiberty and its users: gcc
and libstdc++-v3. This seems highly undesirable, so I decided to
disable the linker plugin instead if large-file support won't work.
The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both
Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to
predefined _FILE_OFFSET_BITS=64). Also regtested on
amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4),
x86_64-pc-linux-gnu and i686-pc-linux-gnu.
config:
* largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>:
Check for <sys/procfs.h> incompatilibity with large-file support
on Solaris.
Only disable large-file support and perhaps plugins if needed.
Set, substitute LARGEFILE_CPPFLAGS if so.
bfd:
* bfd.m4 (BFD_SYS_PROCFS_H): New macro.
(BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H.
Don't define _STRUCTURED_PROC.
(BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise.
* elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define.
* configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>.
* configure, config.in: Regenerate.
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
binutils:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gas:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gdb:
* proc-api.c (_STRUCTURED_PROC): Don't define.
* proc-events.c: Likewise.
* proc-flags.c: Likewise.
* proc-why.c: Likewise.
* procfs.c: Likewise.
* Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* configure, config.in: Regenerate.
gdbserver:
* configure, config.in: Regenerate.
gdbsupport:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for
<sys/procfs.h>.
* Makefile.in: Regenerate.
* configure, config.in: Regenerate.
gnulib:
* configure.ac: Run ACX_LARGEFILE before gl_EARLY.
* configure: Regenerate.
gprof:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
ld:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
|
|
|
|
PR 2587
* Makefile.am: Revert change from 2019-11-13.
* Makefile.in: Regenerate.
|
|
PR 2587
* Makefile.am (SUFFIXES): Add .c.
* Makefile.in: Regenerate.
|
|
PR 2587
* Makefile.am: Fix rule to build .c files from .m files.
|
|
|
|
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
|
|
include/
* opcode/tahoe.h: Delete.
bfd/
* archures.c: Remove tahoe support.
* config.bfd: Likewise.
* configure.ac: Likewise.
* hosts/tahoe.h: Delete.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
opcodes/
* configure.ac: Remove tahoe support.
* configure: Regenerate.
binutils/
* testsuite/binutils-all/objdump.exp: Remove tahoe support.
gprof/
* Makefile.am: Remove tahoe support.
* corefile.c: Likewise.
* tahoe.c: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
|
|
|
|
|
|
|
|
|
|
|
|
This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all
binutils configure.in files. The BFD version is now in bfd/version.m4
rather than bfd/configure.in, which allows automake to automatically
track this dependency.
bfd/
* version.m4: New file.
* configure.in: Include version.m4.
(AC_INIT): Update.
* Makefile.am (RELEASE): Delete.
(bfdver.h): Depend on development.sh, use instead of RELEASE.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
opcodes/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
binutils/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* configure.com: Get bfd version from bfd/version.m4.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
ld/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
|
|
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
|
|
|
|
* Makefile.am (.m.c): Fix input and output file specification.
|
|
* corefile.c (find_call): Call aarch64_find_call for bfd_arch_aarch64.
* Makefile.am (sources): Add aarch64.c.
* Makefile.in: Regenerate.
|
|
|
|
* Makefile.am (TEXINFO_TEX): Remove $(top_srcdir) prefix.
* Makefile.in: Regenerate.
ld/
* Makefile.am (TEXINFO_TEX): Remove $(top_srcdir) prefix.
* Makefile.in: Regenerate.
|
|
* Makefile.in: Regenerate.
|
|
ld/:
* Makefile.am (bin_PROGRAMS): Renamed from ...
(noinst_PROGRAMS): ... this.
(transform): Override, including the renaming of ld-new to ld.
(install-exec-local): Installation of ld in $(bindir) not needed
here any more.
(AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
(MAINTAINERCLEANFILES): Add ld.1.
* Makefile.in: Regenerate.
gold/:
* Makefile.am (AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
* testsuite/Makefile.am (AUTOMAKE_OPTIONS): Add -Wno-portability.
(AM_CPPFLAGS): Renamed from ...
(INCLUDE): ... this.
* Makefile.in, testsuite/Makefile.in: Regenerate.
bfd/:
* Makefile.am (libbfd_la_LDFLAGS): Initialize early, to allow
appending.
[INSTALL_LIBBFD] (bfdlib_LTLIBRARIES, bfdinclude_HEADERS): Set
only in this condition.
[!INSTALL_LIBBFD] (noinst_LTLIBRARIES, libbfd_la_LDFLAGS): New,
to build but not install libbfd.la in this condition.
(install-bfdlibLTLIBRARIES, uninstall-bfdlibLTLIBRARIES)
(install_libbfd, install_libbfd): Remove.
* Makefile.in: Regenerate.
binutils/:
* Makefile.am (AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
(bin2c$(EXEEXT_FOR_BUILD): Adjust rule.
(installcheck-local): Renamed from ...
(installcheck): ... this.
* Makefile.in: Regenerate.
gas/:
* Makefile.am (YFLAGS): Remove, not needed any more.
(AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
* Makefile.in: Regenerate.
gprof/:
* Makefile.am (AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
* Makefile.in: Regenerate.
opcodes/:
* Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
[INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
[INSTALL_LIBBFD] (bfdinclude_DATA): New.
[!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
[!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
is built shared even if it is not to be installed.
(install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
(install_libopcodes, uninstall_libopcodes): Remove.
(AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
* Makefile.in: Regenerate.
|
|
gprof/:
* Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add 1.11,
foreign, no-dist, no-texinfo.tex.
(TEXINFO_TEX): New variable.
(MKDEP, CLEANFILES): Remove:
(DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
(install-data-local): Remove now-unneeded dependency on
install-info.
(mkdep section): Remove.
* Makefile.in: Regenerate.
|
|
/:
* README-maintainer-mode: Point directly to upstream locations
for autoconf, automake, libtool, gettext, instead of copies on
sources.redhat.com. Document required versions.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gdb/:
* CONTRIBUTE: Bump documented Autoconf version.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gdb/doc/:
* gdbint.texinfo (Releasing GDB): Point to
README-maintainer-mode file for required autoconf version.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gprof/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(install-pdf-recursive, html__strip_dir, install-html)
(install-html-am, install-html-recursive): Remove.
* Makefile.in: Regenerate.
opcodes/:
* Makefile.am (install-pdf, install-html): Remove.
* Makefile.in: Regenerate.
gas/:
* Makefile.am (install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* doc/Makefile.in: Regenerate.
ld/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(install-pdf-recursive, html__strip_dir, install-html)
(install-html-am, install-html-recursive): Remove.
* Makefile.in: Regenerate.
binutils/:
* Makefile.am (install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* doc/Makefile.in: Regenerate.
bfd/:
* Makefile.am (datarootdir, docdir, htmldor, pdfdir)
(install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
bfd/doc/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* Makefile.in: Regenerate.
|
|
* Makefile.am (DEP1): LC_ALL for uniq.
* Makefile.in: Regenerate.
|
|
continuation backslash. Prefix first line with "A", following
lines with "B".
* Makefile.am (DEP): Don't use dep.sed here.
(DEP1): Run $MKDEP on single files, use dep.sed here on dependencies,
sort and uniq.
* Makefile.in: Regenerate.
|
|
|
|
opcodes/
* Makefile.am (HFILES): Move lm32-desc.h and lm32-opc.h from..
(CFILES): ..here.
|
|
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* configure.in: AC_SUBST pdfdir.
* Makefile.am: Add install-pdf, install-pdf-am
and install-pdf-recursive targets. Define pdfdir.
* doc/Makefile.am: Define pdf__strip_dir. Add
install-pdf and install-pdf-am targets.
* po/Make-in: Add install-pdf target.
* configure: Regenerate.
* Makefile.in: Regenerate
* doc/Makefile.in: Regenerate.
binutils:
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* configure.in: AC_SUBST pdfdir.
* Makefile.am: Add install-pdf, install-pdf-am,
and install-pdf-recursive targets.
* doc/Makefile.am: Define pdf__strip_dir. Add
install-pdf and install-pdf-am targets.
* po/Make-in: Add install-pdf target.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
etc:
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* configure.in: AC_SUBST pdfdir.
* configure: Regenerate.
gas:
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* configure.in: AC_SUBST pdfdir.
* Makefile.am: Add install-pdf, install-pdf-am,
and install-pdf-recursive targets.
* doc/Makefile.am: Define pdf__strip_dir. Add
install-pdf and install-pdf-am targets.
* po/Make-in: Add install-pdf target.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof:
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* configure.in: AC_SUBST pdfdir.
* Makefile.am: Add install-pdf, install-pdf-am,
and install-pdf-recursive targets. Define pdf__strip_dir.
* po/Make-in: Add install-pdf target.
* configure: Regenerate.
* Makefile.in: Regenerate.
ld:
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* configure.in: AC_SUBST pdfdir.
* Makefile.am: Add install-pdf, install-pdf-am,
and install-pdf-recursive targets. Define pdf__strip_dir.
* po/Make-in: Add install-pdf target.
* configure: Regenerate.
* Makefile.in: Regenerate.
opcodes:
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.am: Add install-pdf target.
* po/Make-in: Add install-pdf target.
* Makefile.in: Regenerate.
|
|
(O_BINARY, SET_BINARY): Don't define here.
* gmon_io.c: Include "binary-io.h".
(gmon_out_read): Remove #ifdef SET_BINARY.
* Makefile.am: Run "make dep-am"
* Makefile.in: Regenerate.
|
|
|
|
* configure.in: Invoke AC_GNU_SOURCE.
* Makefile.in: Regenerate.
* configure: Regenerate.
* gconfig.in: Regenerate.
|
|
$(top_srcdir)/../../bfd/doc.
* doc/Makefile.in: Regenerate.
|
|
|
|
|
|
2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ACLOCAL_AMFLAGS): Add -I . -I ../config.
* acinclude.m4: Don't include m4 files. Remove libtool
kludge.
* Makefile.in: Regenerated.
* doc/Makefile.in: Likewise.
* aclocal.m4: Likewise.
* configure: Likewise.
binutils/
2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
* acinclude.m4: Removed.
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
gas/
2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
* acinclude.m4: Don't include m4 files.
(BFD_BINARY_FOPEN): Removed.
Remove libtool kludge.
* Makefile.in: Regenerated.
* doc/Makefile.in: Likewise.
* aclocal.m4: Likewise.
* configure: Likewise.
gprof/
2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
* acinclude.m4: Removed.
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
ld/
2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
* acinclude.m4: Removed.
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
opcodes/
2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
* acinclude.m4: Removed.
* Makefile.in: Regenerated.
* doc/Makefile.in: Likewise.
* aclocal.m4: Likewise.
* configure: Likewise.
|
|
set discard_underscores.
* gprof.c (discard_underscores): Delete.
* gprof.h (discard_underscores): Delete.
* sym_ids.c (match): Use bfd_get_symbol_leading_char to check for
leading underscores.
* utils.c (print_name_only): Call bfd_demangle rather than
cplus_demangle.
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
|
|
* Makefile.in: Regenerate.
|
|
* Makefile.am (bfdver.h): Only set VERSION_PACKAGE in bfdver.texi
if nonempty.
* configure.in (REPORT_BUGS_TO): Do not use "URL:" prefix.
* Makefile.in, configure, doc/Makefile.in: Regenerate.
binutils:
* doc/binutils.texi: Include VERSION_PACKAGE when reporting
version.
gas:
* doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
gprof:
* Makefile.am (TEXI2POD): Include $(AM_MAKEINFOFLAGS).
(AM_MAKEINFOFLAGS, TEXI2DVI): Define with -I ../bfd/doc.
* Makefile.in: Regenerate.
* gprof.texi: Include bfdver.texi. Report both VERSION_PACKAGE
and VERSION.
ld:
* ld.texinfo: Include VERSION_PACKAGE when reporting version.
|
|
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (bfdver.h): Substitute report_bugs_to. Also
create doc/bfdver.texi.
* Makefile.in: Regenerated.
* configure.in (--with-bugurl): New option.
* configure: Regenerated.
* version.h (REPORT_BUGS_TO): New.
binutils/
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (REPORT_BUGS_TO): Removed.
(INCLUDES): Remove -DREPORT_BUGS_TO.
* Makefile.in: Regenerated.
* bucomm.c: Don't include bfdver.h.
* objdump.c: Likewise.
* version.c: Likewise.
* bucomm.h: Include bfdver.h.
* configure.in (--with-bugurl): Removed.
* configure: Regenerated.
* doc/Makefile.am (binutils_TEXINFOS): Removed.
(AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
(TEXI2DVI): Likewise.
(config.texi): Removed.
(MOSTLYCLEANFILES): Remove config.texi.
* doc/Makefile.in: Regenerated.
* doc/binutils.texi: Include bfdver.texi instead of
config.texi.
gas/
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (REPORT_BUGS_TO): Removed.
(INCLUDES): Remove -DREPORT_BUGS_TO.
* Makefile.in: Regenerated.
* configure.in (--with-bugurl): Removed.
* configure: Regenerated.
* doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
(AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
(TEXI2DVI): Likewise.
(gasver.texi): Removed.
(MOSTLYCLEANFILES): Remove gasver.texi.
(as.1): Don't depend on gasver.texi.
* doc/Makefile.in: Regenerated.
* doc/as.texi: Include bfdver.texi instead of gasver.texi.
gprof/
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (REPORT_BUGS_TO): Removed.
(INCLUDES): Remove -DREPORT_BUGS_TO.
* Makefile.in: Regenerated.
* configure.in (--with-bugurl): Removed.
* configure: Regenerated.
ld/
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ld_TEXINFOS): Remove ldver.texi.
(AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
(TEXI2DVI): Likewise.
(REPORT_BUGS_TO): Removed.
(INCLUDES): Remove -DREPORT_BUGS_TO.
(ldver.texi): Likewise.
(ld.1): Don't depend on ldver.texi.
(MOSTLYCLEANFILES): Remove ldver.texi.
* Makefile.in: Regenerated.
* configure.in (--with-bugurl): Removed.
* configure: Regenerated.
* lexsup.c: Include bfdver.h.
* ld.texinfo: Include bfdver.texi instead of ldver.texi.
|
|
* Makefile.am (bfdver.h): Use "." not " " between version number
and date.
* Makefile.in: Regenerate.
* configure.in (PKGVERSION): Default to "(GNU Binutils) ".
* configure: Regenerate.
binutils:
* version.c (print_version): Update copyright date.
gas:
* as.c (parse_args): Update copyright date.
gprof:
* gprof.c: Include bfdver.h
(main): Use BFD_VERSION_STRING for version number and package
name.
* Makefile.am (PKGVERSION): Remove.
(INCLUDES): Update.
Regenerate dependencies.
* Makefile.in: Regenerate.
* configure.in (PKGVERSION): Remove.
* configure: Regenerate.
ld:
* ldver.c (ldversion): Remove word "version" from output. Update
copyright date.
|
|
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* configure.ac (TOPLEVEL_CONFIGURE_ARGUMENTS): Fix quoting.
* configure: Regenerate.
bfd:
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* configure.in (--with-pkgversion): New option.
* configure: Regenerate.
* Makefile.am (bfdver.h): Substitute for @bfd_version_package@.
* Makefile.in: Regenerate.
* version.h (BFD_VERSION_STRING): Define using
@bfd_version_package@.
bfd/doc:
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* Makefile.in: Regenerate.
binutils:
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* configure.in (--with-bugurl): New option.
* configure: Regenerate.
* Makefile.am (REPORT_BUGS_TO): Define.
(INCLUDES): Define REPORT_BUGS_TO.
Regenerate dependencies.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* bucomm.h: Remove include of bin-bugs.h.
* addr2line.c (usage): Don't print empty REPORT_BUGS_TO.
* ar.c (usage): Pass s to list_supported_targets. Don't print
empty REPORT_BUGS_TO.
* coffdump.c (show_usage): Don't print empty REPORT_BUGS_TO.
* cxxfilt.c (usage): Print bug url when giving help.
* dlltool.c (usage): Likewise.
* dllwrap.c (usage): Likewise.
* nlmconv.c (show_usage): Don't print empty REPORT_BUGS_TO.
* nm.c (usage): Likewise.
* objcopy.c (copy_usage, strip_usage): Likewise.
* objdump.c (usage): Likewise.
* readelf.c ((usage): Likewise. Add STREAM argument. Adjust
callers.
* size.c (usage): Don't print empty REPORT_BUGS_TO.
* srconv.c (show_usage): Likewise.
* strings.c (usage): Likewise.
* sysdymp.c (show_usage): Likewise.
* windres.c (usage): Likewise.
gas:
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* configure.in (--with-bugurl): New option.
* configure: Regenerate.
* dep-in.sed: Remove bin-bugs.h.
* Makefile.am (REPORT_BUGS_TO): Define.
(INCLUDES): Define REPORT_BUGS_TO.
(DEP_INCLUDES): Likewise.
($(OBJS)): No longer depend on bin-bugs.h.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* as.c (show_usage): Don't print empty REPORT_BUGS_TO.
* as.h: Remove include of bin-bugs.h.
gprof:
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* configure.in (--with-pkgversion, --with-bugurl): New options.
* configure: Regenerate.
* Makefile.am (PKGVERSION, REPORT_BUGS_TO): Define.
(INCLUDES): Define PKGVERSION and REPORT_BUGS_TO.
Regenerate dependencies.
* Makefile.in: Regenerate.
* gprof.c (usage): Don't print empty REPORT_BUGS_TO.
(main): Include PKGVERSION in version output.
* gprof.h: Remove include of bin-bugs.h.
include:
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* bin-bugs.h: Remove.
ld:
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* configure.in (--with-bugurl): New option.
* configure: Regenerate.
* Makefile.am (REPORT_BUGS_TO): Define.
(INCLUDES): Define REPORT_BUGS_TO.
Regenerate dependencies.
* Makefile.in: Regenerate.
* ld.h: Remove include of bin-bugs.h.
* lexsup.c (help): Don't print empty REPORT_BUGS_TO.
|
|
* doc/Makefile.am (bfd_TEXINFOS): Set.
(bfd.info bfd.dvi bfd.html): Delete rule.
* doc/Makefile.in: Regenerated.
gas/
* doc/Makefile.am (as_TEXINFOS): Set.
(as.info as.dvi as.html): Delete rule.
* doc/Makefile.in: Regenerated.
gprof/
* Makefile.am (gprof_TEXINFOS): Set.
(gprof.info gprof.dvi gprof.html): Delete rule.
* Makefile.in: Regenerated.
ld/
* Makefile.am (ld_TEXINFOS): Set.
(ld.info ld.dvi ld.html): Delete rule.
* Makefile.in: Regenerated.
|
|
* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (bfd.info): Remove srcdir prefix.
(MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in, doc/Makefile.in: Regenerated.
binutils/
* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in, doc/Makefile.in: Regenerated.
gas/
* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (as.info): Remove srcdir prefix.
(MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in, doc/Makefile.in: Regenerated.
gprof/
* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (gprof.info): Remove srcdir prefix.
(MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in: Regenerated.
ld/
* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (ld.info): Remove srcdir prefix.
(MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in: Regenerated.
opcodes/
* po/Make-in (.po.gmo): Put gmo files in objdir.
|
|
config/gettext-sister.m4 instead of the old gettext.m4. Regenerate all
affected autotools files. Include intl in gdb releases again.
|