aboutsummaryrefslogtreecommitdiff
path: root/gold
AgeCommit message (Collapse)AuthorFilesLines
2020-08-24PowerPC TPREL_HA/LO optimisationAlan Modra2-88/+181
ppc64 ld optimises sequences like the following addis 3,13,wot@tprel@ha lwz 3,wot@tprel@l(3) to nop lwz 3,wot@tprel(13) when "wot" is located near enough to the thread pointer. However, the ABI doesn't require that R_PPC64_TPREL16_HA always be on an addis rt,13,imm instruction, and while ld checked for that on the high-part instruction it didn't disable the optimisation on the low-part instruction. This patch fixes that problem, disabling the tprel optimisation globally if high-part instructions don't pass sanity checks. The optimisation is also enabled for ppc32, where before ld.bfd had the code in the wrong place and ld.gold had it in a block only enabled for ppc64. bfd/ * elf32-ppc.c (ppc_elf_check_relocs): Set has_tls_reloc for high part tprel16 relocs. (ppc_elf_tls_optimize): Sanity check high part tprel16 relocs. Clear do_tls_opt on odd instructions. (ppc_elf_relocate_section): Move TPREL16_HA/LO optimisation later. Don't sanity check them here. * elf64-ppc.c (ppc64_elf_check_relocs): Set has_tls_reloc for high part tprel16 relocs. (ppc64_elf_tls_optimize): Sanity check high part tprel16 relocs. Clear do_tls_opt on odd instructions. (ppc64_elf_relocate_section): Don't sanity check TPREL16_HA. ld/ * testsuite/ld-powerpc/tls32.d: Update for TPREL_HA/LO optimisation. * testsuite/ld-powerpc/tlsexe32.d: Likewise. * testsuite/ld-powerpc/tlsldopt32.d: Likewise. * testsuite/ld-powerpc/tlsmark32.d: Likewise. * testsuite/ld-powerpc/tlsopt4_32.d: Likewise. * testsuite/ld-powerpc/tprel.s, * testsuite/ld-powerpc/tprel.d, * testsuite/ld-powerpc/tprel32.d: New tests. * testsuite/ld-powerpc/tprelbad.s, * testsuite/ld-powerpc/tprelbad.d: New test. * testsuite/ld-powerpc/powerpc.exp: Run them. gold/ * powerpc.cc (Target_powerpc): Add tprel_opt_ and accessors. (Target_powerpc::Scan::local): Sanity check tprel high relocs. (Target_powerpc::Scan::global): Likewise. (Target_powerpc::Relocate::relocate): Control tprel optimisation with tprel_opt_ and enable for 32-bit.
2020-08-12Updated Serbian and Russian translations for various sub-directoriesNick Clifton2-371/+387
2020-07-27[GOLD] Power10 stub selectionAlan Modra4-234/+548
gold version of commit e10a07b32dc1. * options.h (DEFINE_enum): Add optional_arg__ param, adjust all uses. (General_options): Add --power10-stubs and --no-power10-stubs. * options.cc (General_options::finalize): Handle --power10-stubs. * powerpc.cc (set_power10_stubs): Don't set when --power10-stubs=no. (power10_stubs_auto): New. (struct Plt_stub_ent): Add toc_ and tocoff_. Don't use a bitfield for indx_. (struct Branch_stub_ent): Add toc_and tocoff_. Use bitfields for iter_, notoc_ and save_res_. (add_plt_call_entry): Set toc_. Adjust resizing conditions for --power10-stubs=auto. (add_long_branch_entry): Set toc_. (add_eh_frame, define_stub_syms): No longer use const_iterators for plt and long branch stub iteration. (build_tls_opt_head, build_tls_opt_tail): Change parameters and return value. Move tests for __tls_get_addr to callers. (plt_call_size): Handle --power10-stubs=auto. (branch_stub_size): Likewise. (Stub_table::do_write): Likewise. (relocate): Likewise.
2020-07-19gold: Update x32 testH.J. Lu2-4/+5
* testsuite/split_x32.sh: Likewise.
2020-07-19gold: Update x86-64 testsH.J. Lu5-14/+21
commit 36938cabf0efcb053d1585e8580a4b3db438ca4e Author: Jan Beulich <jbeulich@suse.com> Date: Wed Jul 15 08:53:55 2020 +0200 x86: avoid attaching suffixes to unambiguous insns removed the 'a' suffix on call and jmp from disassembler output. Update gold x86-64 tests. * testsuite/bnd_ifunc_1.sh: Updated. * testsuite/bnd_plt_1.sh: Likewise. * testsuite/split_x86_64.sh: Likewise. * testsuite/x86_64_indirect_call_to_direct.sh: Likewise.
2020-07-08Commit: Fix GOLD testsuite failures for 2.35 branch.Nick Clifton3-2/+11
* testsuite/script_test_7.sh: Adjust expected address of the .bss section. * testsuite/script_test_9.sh: Do not expect the .init section to immediately follow the .text section in the mapping of sections to segments.
2020-07-07Stop the GOLD linker from complaining about relocations from ↵Nick Clifton2-0/+6
.gnu.build.attributes sections to discarded code sections. * target-reloc.h (Default_comdat_behaviour:get): Ignore discarded relocs that refer to the .gnu.build.attributes section.
2020-07-06Updated translations for various binutils sub-directoriesNick Clifton3-828/+770
2020-07-04Add markers for binutils 2.35 branchNick Clifton1-0/+4
2020-07-03Re: Change readelf's display of symbol namesAlan Modra3-2/+9
Fixes some fallout from git commit 0942c7ab94e5. PR 26028 gas/ * testsuite/gas/ia64/unwind-ilp32.d: Add -T to readelf options. gold/ * testsuite/Makefile.am (file_in_many_sections.stdout): Add -W to readelf options. * testsuite/Makefile.in: Regenerate. ld/ * testsuite/ld-arm/arm-elf.exp (vxworks1): Pass --wide to readelf when dumping relocs. * testsuite/ld-i386/i386.exp (vxworks1): Likewise. * testsuite/ld-sh/sh-vxworks.exp (vxworks1): Likewise. * testsuite/ld-sparc/sparc.exp (vxworks1): Likewise. * testsuite/ld-arm/vxworks1.rd: Adjust to suit. * testsuite/ld-i386/vxworks1.rd: Adjust. * testsuite/ld-sh/vxworks1.rd: Adjust. * testsuite/ld-sparc/vxworks1.rd: Adjust.
2020-06-26libctf, elfcpp, gold: do not assume that <byteswap.h> contains bswap_*Nick Alcock4-46/+102
At least one C library (uclibc-ng) defines some of these only when the compiler is GCC. We might as well test for all three cases and handle any of them being missing. Very similar code exists in libctf and split between elfcpp and gold: fix both. (Also sync up elfcpp with a change made to libctf swap.h a few months ago: since there is no out-of-line definition of the bswap replacements, they should be declared static inline, not just inline, to prevent the linker generating out-of-line references to them.) PR libctf/25120 libctf/ * configure.ac: Check for bswap_16, bswap_32, and bswap_64 decls. * swap.h (bswap_16): Do not assume that presence of <byteswap.h> means this is declared. (bswap_32): Likewise. (bswap_64): Likewise. (bswap_identity_64): Remove, unused. * configure: Regenerated. * config.h.in: Likewise. gold/ * configure.ac: Check for bswap_16, bswap_32, and bswap_64 decls. * configure: Regenerated. * config.h.in: Likewise. elfcpp/ * elfcpp_swap.h (bswap_16): Do not assume that presence of <byteswap.h> means this is declared. Make static inline, matching recent change to libctf, since there is no non-inline definition of these functions. (bswap_32): Likewise. (bswap_64): Likewise.
2020-06-24Fix a potential use of an uninitialised variable error in gold.Nick Clifton2-1/+6
* target-reloc.h (issue_discarded_error): Initialise the key_symndx variable.
2020-06-23PR 22843: ld, gold: Add --dependency-file option.Roland McGrath5-38/+103
gold/ * options.h (class General_options): Add --dependency-file option. * fileread.cc (File_read::files_read): New static variable. (File_read::open): Add the file to the files_read list. (File_read::record_file_read): New static member function. (File_read::write_dependency_file): New static member function. * fileread.h (class File_read): Declare them. * layout.cc (Layout::read_layout_from_file): Call record_file_read. (Close_task_runner::run): Call write_dependency_file if --dependency-file was passed. ld/ * NEWS: Note --dependency-file. * ld.texi (Options): Document --dependency-file. * ldlex.h (enum option_values): Add OPTION_DEPENDENCY_FILE. * ld.h (ld_config_type): New member dependency_file. * lexsup.c (ld_options, parse_args): Parse --dependency-file. * ldmain.c (struct dependency_file): New type. (dependency_files, dependency_files_tail): New static variables. (track_dependency_files): New function. (write_dependency_file): New function. (main): Call it when --dependency-file was passed. * ldfile.c (ldfile_try_open_bfd): Call track_dependency_files. (ldfile_open_command_file_1): Likewise. * ldelf.c (ldelf_try_needed): Likewise. * pe-dll.c (pe_implied_import_dll): Likewise.
2020-06-18[PATCH] gold: Set DF_1_PIE for -pieFangrui Song2-0/+7
PR gold/26039 * layout.cc (Layout::finish_dynamic_section): Set DF_1_PIE. elfcpp/ * elfcpp.h (enum DF_1): New enum member DF_1_PIE.
2020-06-16Use __asm__ rather than asm in gold testsuiteAlan Modra3-6/+10
discard_locals_test.c:28:6: error: expected declaration specifiers or ‘...’ before string constant asm (".Lshould_be_discarded:"); ^ * testsuite/discard_locals_test.c: Replace uses of asm with __asm__. * testsuite/discard_locals_relocatable_test.c: Likewise.
2020-06-16Use CXXCOMPILE in gold/testsuite/Makefile for c++ testcasesAlan Modra3-6/+13
I was playing with passing -std=c99 to an older version of gcc by using CC="gcc-4 -std=c99", and ran into cc1plus: error: command line option ‘-std=c99’ is valid for C/ObjC but not for C++ [-Werror] This obvious fix uses the correct compiler for a number of gold testcases. * testsuite/Makefile.am (export_dynamic_plugin.o): Use CXXCOMPILE. (plugin_test_wrap_symbols_1.o): Likewise. (plugin_test_wrap_symbols_2.o): Likewise. * testsuite/Makefile.in: Regenerate.
2020-06-15gold, ld: Implement -z start-stop-visibility=... option.Roland McGrath4-3/+45
gold/ Implement -z start-stop-visibility=... option. * options.h (class General_options): Handle -z start-stop-visibility=. (General_options::start_stop_visibility_enum): New public method. (General_options::set_start_stop_visibility_enum): New private method. (General_options::start_stop_visibility_enum_): New private member. * options.cc (General_options::General_options): Add initializer. (General_options::finalize): Set this->start_stop_visibility_enum_ from string value. * layout.cc (Layout::define_section_symbols): Use option setting. bfd/ * elflink.c (bfd_elf_define_start_stop): Use start_stop_visibility field of bfd_link_info. include/ * bfdlink.h (struct bfd_link_info): New field start_stop_visibility. ld/ * NEWS: Mention -z start-stop-visibility=... option for ELF. * ld.texi (Options): Document -z start-stop-visibility=... option. * ldmain.c (main): Initialize link_info.start_stop_visibility. * emultempl/elf.em (gld${EMULATION_NAME}_handle_option): Parse -z start-stop-visibility=... option.
2020-06-06Rename PowerPC64 pcrel GOT TLS relocationsAlan Modra2-45/+49
These relocations should have had REL in their names, to reflect the fact that they are pc-relative. Fix that now by adding _PCREL. I've added some back-compatibility code to support anyone using .reloc with the old relocations. include/ * elf/ppc64.h (elf_ppc64_reloc_type): Rename R_PPC64_GOT_TLSGD34 to R_PPC64_GOT_TLSGD_PCREL34, R_PPC64_GOT_TLSLD34 to R_PPC64_GOT_TLSLD_PCREL34, R_PPC64_GOT_TPREL34 to R_PPC64_GOT_TPREL_PCREL34, and R_PPC64_GOT_DTPREL34 to R_PPC64_GOT_DTPREL_PCREL34. bfd/ * reloc.c: Rename BFD_RELOC_PPC64_GOT_TLSGD34 to BFD_RELOC_PPC64_GOT_TLSGD_PCREL34, BFD_RELOC_PPC64_GOT_TLSLD34 to BFD_RELOC_PPC64_GOT_TLSLD_PCREL34, BFD_RELOC_PPC64_GOT_TPREL34 to BFD_RELOC_PPC64_GOT_TPREL_PCREL34, BFD_RELOC_PPC64_GOT_DTPREL34 to BFD_RELOC_PPC64_GOT_DTPREL_PCREL34. * elf64-ppc.c: Update throughout for reloc renaming. (ppc64_elf_reloc_name_lookup): Handle old reloc names. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. gas/ * config/tc-ppc.c: Update throughout for reloc renaming. elfcpp/ * powerpc.h: Rename R_PPC64_GOT_TLSGD34 to R_PPC64_GOT_TLSGD_PCREL34, R_PPC64_GOT_TLSLD34 to R_PPC64_GOT_TLSLD_PCREL34, R_PPC64_GOT_TPREL34 to R_PPC64_GOT_TPREL_PCREL34, and R_PPC64_GOT_DTPREL34 to R_PPC64_GOT_DTPREL_PCREL34. gold/ * powerpc.cc: Update throughout for reloc renaming.
2020-05-22PowerPC: downgrade FP mismatch error for shared libraries to a warningAlan Modra2-14/+35
PR 25882 bfd/ * elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Don't init FP attributes from shared libraries, and do not return an error if they don't match. gold/ * powerpc.cc (merge_object_attributes): Replace name param with obj param. Update callers. Don't init FP attributes from shared libraries, and do not emit an error if they don't match.
2020-05-15gold: powerpc: Test whether sym is not a plugin in do_gc_mark_symbolNikita Ermakov2-1/+5
sym->object() could be either a Plugin or Powerpc_relobj. There could be a situation when Pluginobj would be proccessed in ppc_object->get_opd_ent(dst_off) as Powerpc_relobj and it leads to the segmentation fault. * powerpc.cc (do_gc_mark_symbol): Don't segfault on plugin symbols.
2020-05-14Update Swedish translation for the gas sub-directory and a new Serbian ↵Nick Clifton2-0/+4221
translation for the gold sub-directory.
2020-05-11PowerPC Rename powerxx to power10Alan Modra2-19/+23
Now that ISA3.1 is out we can finish with the powerxx silliness. bfd/ * elf64-ppc.c: Rename powerxx to power10 throughout. gas/ * config/tc-ppc.c (md_assemble): Update for PPC_OPCODE_POWER10 renaming. * testsuite/gas/ppc/prefix-align.d: Use -mpower10/-Mpower10 in place of -mfuture/-Mfuture. * testsuite/gas/ppc/prefix-pcrel.d: Likewise. * testsuite/gas/ppc/prefix-reloc.d: Likewise. gold/ * powerpc.cc: Rename powerxx to power10 throughout. include/ * elf/ppc64.h: Update comment. * opcode/ppc.h (PPC_OPCODE_POWER10): Rename from PPC_OPCODE_POWERXX. ld/ * testsuite/ld-powerpc/callstub-1.d: Use -mpower10/-Mpower10 in place of -mfuture/-Mfuture. * testsuite/ld-powerpc/notoc2.d: Likewise. * testsuite/ld-powerpc/powerpc.exp: Likewise. * testsuite/ld-powerpc/tlsgd.d: Likewise. * testsuite/ld-powerpc/tlsie.d: Likewise. * testsuite/ld-powerpc/tlsld.d: Likewise. opcodes/ * ppc-dis.c (ppc_opts): Add "power10" entry. (print_insn_powerpc): Update for PPC_OPCODE_POWER10 renaming. * ppc-opc.c (POWER10): Rename from POWERXX. Update all uses.
2020-05-02gold: Compile common tests with -fcommonH.J. Lu3-4/+57
Since GCC 10 defaults to -fno-common, add -fcommon to common tests to force common behavior. PR gold/25904 * testsuite/Makefile.am (COMMON_TEST_C_CFLAGS): New. (common_test_1.o): New rule. (common_test_2.o): Likewise. (common_test_3.o): Likewise. (plugin_common_test_1.o): Likewise. (plugin_common_test_2.o): Likewise. (common_test_1_v1.o): Likewise. (common_test_1_v2.o): Likewise. (common_test_2_pic.o): Compile with $(COMMON_TEST_C_CFLAGS). (common_test_3_pic.o): Likewise. * testsuite/Makefile.in: Regenerated.
2020-05-01gold: x86-64: Fix TLSDESC relaxation for x32H.J. Lu4-23/+82
X32 TLSDESC sequences can be: 40 8d 05 00 00 00 00 rex lea foo@TLSDESC(%rip), %reg ... 67 ff 10 call *foo@TLSCALL(%eax) or the same sequence as LP64: 48 8d 05 00 00 00 00 lea foo@TLSDESC(%rip), %reg ... ff 10 call *foo@TLSCALL(%rax) We need to support both sequences for x32. For both GDesc -> IE/LE transitions, 67 ff 10 call *foo@TLSCALL(%eax) should relaxed to 0f 1f 00 nopl (%rax) For GDesc -> LE transition, 40 8d 05 00 00 00 00 rex lea foo@TLSDESC(%rip), %reg should relaxed to 40 c7 c0 fc ff ff ff rex movl $foo@tpoff, %reg For GDesc -> IE transition, 40 8d 05 00 00 00 00 rex lea foo@TLSDESC(%rip), %reg should relaxed to 40 8b 05 00 00 00 00 rex movl foo@gottpoff(%rip), %eax PR gold/25426 * x86_64.cc (Target_x86_64<size>::Relocate::tls_desc_gd_to_ie): For x32, relax "rex leal foo@tlsdesc(%rip), %reg" to "rex movl foo@gottpoff(%rip), %eax" and relax ""call *(%eax)" to "nopl (%rax)". (Target_x86_64<size>::Relocate::tls_desc_gd_to_le): For x32, relax "rex leal foo@tlsdesc(%rip), %reg" to "rex movl foo@tpoff, %eax" and relax "call *foo@tlscall(%eax)" to "nopl (%rax)". * testsuite/Makefile.am (tls_test_gnu2.o): Depend on gcctestdir/as. (tls_test_file2_gnu2.o): Likewise. (tls_test_c_gnu2.o): Likewise. * testsuite/Makefile.in: Regenerated.
2020-05-01gold: x86-64: Fix TLSDESC -> LE relaxationH.J. Lu6-3/+103
X86-64 TLSDESC sequences can be: 4c 8d 0d 00 00 00 00 leaq foo@TLSDESC(%rip), %r9 4c 89 c8 movq %r9, %rax ff 10 call *foo@TLSCALL(%rax) TLSDESC -> LE relaxation can turn them into: 49 c7 c1 fc ff ff ff mov $0xfffffffffffffffc,%r9 4c 89 c8 mov %r9,%rax 66 90 xchg %ax,%ax We need to check and update the REX byte in this case. PR gold/25473 * x86_64.cc (Target_x86_64<size>::Relocate::tls_desc_gd_to_ie): Properly check r8 - r15 in "lea foo@TLSDESC(%rip), %reg". (Target_x86_64<size>::Relocate::tls_desc_gd_to_le): Properly relax r8 - r15 in "lea foo@TLSDESC(%rip), %reg". * testsuite/Makefile.am (check_SCRIPTS): Add x86_64_gd_to_le.sh. (check_DATA): Add x86_64_gd_to_le.stdout. (MOSTLYCLEANFILES): Add x86_64_gd_to_le. (x86_64_gd_to_le.o): New target. (x86_64_gd_to_le): Likewise. (x86_64_gd_to_le.stdout): Likewise. * testsuite/Makefile.in: Regenerated. * testsuite/x86_64_gd_to_le.s: New file. * testsuite/x86_64_gd_to_le.sh: Likewise.
2020-05-01gold: Make Ordering::operator() even more complexH.J. Lu2-1/+6
GCC 9 generates the same function size for Ordering::operator() in odr_violation1.cc and odr_violation2.cc on x32: 134: 00000000 31 FUNC WEAK DEFAULT 64 _ZN8OrderingclEii 40: 00000000 31 FUNC GLOBAL DEFAULT 10 _ZN8OrderingclEii This patch makes Ordering::operator() even more complex 134: 00000000 31 FUNC WEAK DEFAULT 64 _ZN8OrderingclEii 42: 00000000 35 FUNC GLOBAL DEFAULT 11 _ZN8OrderingclEii * testsuite/odr_violation2.cc (Ordering::operator()): Make expression even more complex.
2020-05-01gold: Update ver_test_pr16504.shH.J. Lu2-2/+6
commit df3a023bd614133fe69afb02cd0e8f3e590a36a9 Author: Alan Modra <amodra@gmail.com> Date: Tue Jul 23 17:54:42 2019 +0930 SHF_GNU_MBIND requires ELFOSABI_GNU changed readelf to print IFUNC only for ELFOSABI_GNU. Since $ readelf -h ver_test_pr16504.so ... OS/ABI: UNIX - System V ... we get $ readelf -sW ver_test_pr16504.so ... 3: 0000000000000378 13 <OS specific>: 10 GLOBAL DEFAULT 9 foo@@VER1 ... Update ver_test_pr16504.sh to also accept "<OS specific>: 10". * testsuite/ver_test_pr16504.sh: Updated.
2020-05-01gold: Increment plt_offset after setting TLSDESC PLT entryH.J. Lu2-0/+9
Increment plt_offset after setting the reserved TLSDESC PLT entry. PR gold/25872 * x86_64.cc (Output_data_plt_x86_64_bnd::do_write): Increment plt_offset after setting the reserved TLSDESC PLT entry. (Output_data_plt_x86_64_ibt<size>::do_write): Likewise.
2020-05-01gold: Handle local IFUNC symbol for APLTH.J. Lu2-2/+19
Handle local IFUNC symbol for APLT like global IFUNC symbol. PR gold/25872 * x86_64.cc (Output_data_plt_x86_64_bnd::do_address_for_local): Handle local IFUNC symbol. (Output_data_plt_x86_64_ibt::do_address_for_local): Likewise.
2020-03-19Add support for --no-rosegment option.Fangrui Song2-1/+5
gold/ * options.h (General_options): Add --no-rosegment option.
2020-02-24Updated translations for some of the binutils sub-directories.Nick Clifton2-149/+163
2020-01-20Updated translations for various binutils sub-directoriesNick Clifton2-150/+164
2020-01-18Update version to 2.34.50. Regenerate configure and .pot files.Nick Clifton2-142/+159
2020-01-18Add markers for 2.34 branch to the NEWS files and ChangeLogs.Nick Clifton1-0/+4
2020-01-01Re: Update year range in copyright notice of binutils filesAlan Modra1-0/+4
Add the ChangeLog entry.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra479-481/+481
2020-01-01ChangeLog rotationAlan Modra2-276/+290
2019-11-26Introduce new .text.sorted.* sections.Martin Liska5-3/+66
gold/ChangeLog: 2019-11-26 Martin Liska <mliska@suse.cz> * layout.cc (Layout::special_ordering_of_input_section): Add ".text.sorted". * output.cc: Special case ".text.sorted". * testsuite/section_sorting_name.cc: Cover also .text.sorted subsections. * testsuite/section_sorting_name.sh: Likewise. ld/ChangeLog: 2019-11-26 Martin Liska <mliska@suse.cz> * scripttempl/arclinux.sc: Add .text.sorted.* which is sorted by default. * scripttempl/elf.sc: Likewise. * scripttempl/elf64bpf.sc: Likewise. * scripttempl/nds32elf.sc: Likewise. * testsuite/ld-arm/arm-no-rel-plt.ld: Expect .text.sorted.* in the default linker script. * testsuite/ld-arm/fdpic-main.ld: Likewise. * testsuite/ld-arm/fdpic-shared.ld: Likewise.
2019-11-19[GOLD] OSABI not set when STT_GNU_IFUNC or STB_GNU_UNIQUE symbols outputAlan Modra4-4/+52
This patch arranges to have OSABI set to ELFOSABI_GNU (if not set to some other non-zero value) when gold outputs an ifunc local or global symbol, or a unique global symbol to either .dynsym or .symtab. STT_GNU_IFUNC and STB_GNU_UNIQUE have values in the LOOS to HIOS range and therefore require interpretation according to OSABI. I'm not sure why parameters->target() is const Target& while parameters->sized_target() is Sized_target*, but it's inconvenient to use the latter in Symbol_table::finalize. So this patch adds another const_cast complained about in layout.cc and gold.cc. PR 24853 * symtab.h (set_has_gnu_output, has_gnu_output_): New. * symtab.cc (Symbol_table::Symbol_table): Init has_gnu_output_. (Symbol_table::finalize): Set ELFOSABI_GNU when has_gnu_output_. (Symbol_table::set_dynsym_indexes, Symbol_table::sized_finalize): Call set_has_gnu_output for STT_GNU_IFUNC and STB_GNU_UNIQUE globals. * object.cc (Sized_relobj_file::do_finalize_local_symbols): Call set_has_gnu_output when STT_GNU_IFUNC locals will be output.
2019-11-11PR24996, Gold fix for ternary operator within linker scriptsMiguel Saldivar2-2/+9
PR 24996 * expression.cc (Trinary_expression::arg2_value): Use correct integer expression when calling "eval_maybe_dot" method. (Trinary_expression::arg3_value): Likewise.
2019-09-28PR16794, gold ignores R_386_GOTOFF addendAlan Modra3-8/+14
An R_386_GOTOFF relocation has an addend, typically used when a symbol can be replaced by its section symbol plus an offset. psymval->value(object,0) is quite wrong then, fix it. PR 16794 * i386.cc (Target_i386::Relocate::relocate <R_386_GOTOFF>): Don't ignore addend, apply using pcrel32. * x86_64.cc (Target_x86_64::Relocate::relocate <R_X86_64_GOTOFF64>): Similarly use pcrel64.
2019-09-24Fix building gold with gcc-10.Nick Clifton2-0/+5
* descriptors.cc: Include <string>
2019-09-23implicit conversion from enum ld_plugin_level to enum ld_plugin_statusAlan Modra2-3/+8
This is a gcc10 warning fix. gold/ * testsuite/plugin_new_section_layout.c (new_input_hook): Correct return status enum values.
2019-09-20[GOLD] Fix spurious "plugin needed to handle lto object" warningsAlan Modra3-4/+17
lto_slim_object_ was unitialized. I also thought it worth adding a sanity check on the .gnu.lto_.lto.* section size, and made some other tidies. PR 24768 * layout.cc (Layout::Layout): Init lto_slim_object_. * object.cc (Sized_relobj_file::do_layout): Wrap overlong line. Don't use C cast. Validate section size. Don't copy contents.
2019-09-20PowerPC64, error on unsupported dynamic relocationAlan Modra2-1/+6
This patch corrects the set of dynamic relocations recognised by gold as supported by glibc, and teaches ld.bfd to report an error similar to the gold error. Note that ld --noinhibit-exec can be used to produce an output, supporting older ld with newer glibc if the set of supported glibc dynamic relocations changes. bfd/ * elf64-ppc.c (ppc64_glibc_dynamic_reloc): New function. (ppc64_elf_relocate_section): Error if emitting unsupported dynamic relocations. gold/ * powerpc.cc (Target_powerpc::Scan::check_non_pic): Move REL24 to 32-bit supported.
2019-09-18Re-generate many configure and Makefile.in filesSimon Marchi2-1/+4
I get some spurious changes when running autoconf/automake for various projects in the tree. This is likely because they were generated using distro-patched tools last time. I ran `autoreconf -f` in the various automake projects of the binutils-gdb tree, and this is the result. The tools I am using have been compiled from source, from the upstream release. bfd/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gas/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gold/ChangeLog: * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. ld/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. opcodes/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate.
2019-09-09Add markers for 2.33 branch to NEWS and ChangeLog files.Phil Blundell1-0/+4
2019-08-16Fix detection of missing plugin for LTO objects.Martin Liska2-3/+11
2019-08-16 Martin Liska <mliska@suse.cz> PR ld/24912 * elflink.c: Report error only for not relocatable. * linker.c (_bfd_generic_link_add_one_symbol): Do not handle here lto_slim_object as it's handled in caller. 2019-08-16 Martin Liska <mliska@suse.cz> PR ld/24912 * object.cc (big_endian>::do_layout): Do not report error, but only set a flag. (big_endian>::do_add_symbols): Report error only for when relocatable.
2019-08-02[GOLD] PowerPC64 pc-relative TLS supportAlan Modra2-68/+347
Gold version of git commit c213164ad2. elfcpp/ * powerpc.h (R_PPC64_TPREL34, R_PPC64_DTPREL34), (R_PPC64_GOT_TLSGD34, R_PPC64_GOT_TLSLD34), (R_PPC64_GOT_TPREL34, R_PPC64_GOT_DTPREL34): Define. gold/ * powerpc.cc (Target_powerpc::Scan::get_reference_flags): Set flags for new relocations, and some missing older relocs. (Target_powerpc::Scan::local): Handle new pcrel tls relocs. Call set_has_static_tls for tprel relocs. (Target_powerpc::Scan::global): Likewise. (Target_powerpc::Relocate::relocate): Handle new pcrel tls relocs.
2019-08-02[GOLD] PowerPC relocation signed overflow checkAlan Modra2-4/+17
Relocations with right shifts were calculating wrong overflow status. Since the addr34 split-field reloc is implemented as an 18-bit high part with value shifted right by 16 and a 16-bit low part, most of the pc-relative relocs were affected. * powerpc.cc (Powerpc_relocate_functions::rela, rela_ua): Perform signed right shift for signed overflow check.
generated by cgit v1.1 at 2024-10-14 22:19:25 +0000