| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.72/autoconf.html#index-AC_005fINIT-2
|
|
- AC_CONFIG_HEADER by AC_CONFIG_HEADERS
https://www.gnu.org/software/automake/manual/1.12.2/html_node/Obsolete-Macros.html#index-AM_005fCONFIG_005fHEADER
|
|
I believe that the get_exec_file function is unnecessary, and the code
can be simplified if we remove it.
Consider for instance when you "run" a program on Linux with native
debugging.
1. run_command_1 obtains the executable file from
`current_program_space->exec_filename ()`
2. it passes it to `run_target->create_inferior()`, which is
`inf_ptrace_target::create_inferior()` in this case, which then
passes it to `fork_inferior()`
3. `fork_inferior()` then has a fallback, where if the passed exec file
is nullptr, it gets its from `get_exec_file()`.
4. `get_exec_file()` returns `current_program_space->exec_filename ()`
- just like the things we started with - or errors out if the
current program space doesn't have a specified executable.
If there's no exec filename passed in step 1, there's not going to be
any in step 4, so it seems pointless to call `get_exec_file()`, we could
just error out when `exec_file` is nullptr. But we can't error out
directly in `fork_inferior()`, since the error is GDB-specific, and that
function is shared with GDBserver.
Speaking of GDBserver, all code paths that lead to `fork_inferior()`
provide a non-nullptr exec file.
Therefore, to simplify things:
- Make `fork_inferior()` assume that the passed exec file is not
nullptr, don't call `get_exec_file()`
- Change some targets (darwin-nat, go32-nat, gnu-nat, inf-ptrace,
nto-procfs, procfs) to error out when the exec file passed to their
create_inferior method is nullptr. Some targets are fine with a
nullptr exec file, so we can't check that in `run_command_1()`.
- Add the `no_executable_specified_error()` function, which re-uses the
error message that `get_exec_file()` had.
- Change some targets (go32-nat, nto-procfs) to not call
`get_exec_file()`, since it's pointless for the same reason as in the
example above, if it returns, it's going the be the same value as the
`exec_file` parameter. Just rely on `exec_file`.
- Remove the final use of `get_exec_file()`, in `load_command()`.
- Remove the `get_exec_file()` implementations in GDB and GDBserver and
remove the shared declaration.
Change-Id: I601c16498e455f7baa1f111a179da2f6c913baa3
Approved-By: Tom Tromey <tom@tromey.com>
|
|
`current_program_space->exec_filename ()`
Calls of `get_exec_file (0)` are equivalent to just getting the exec
filename from the current program space. I'm looking to remove
`get_exec_file`, so replace these uses with
`current_program_space->exec_filename ()`.
Remove the `err` parameter of `get_exec_wrapper` since all the calls
that remain pass 1, meaning to error out if no executable is specified.
Change-Id: I7729ea4c7f03dbb046211cc5aa3858ab3a551965
Approved-By: Tom Tromey <tom@tromey.com>
|
|
Currently, if you configure gdb with explicit --enable-threading, but
then configure detects std::thread does not work, configure silently
disables threading support and continues configuring.
This patch makes that scenario cause a configuration error, like so:
$ /home/pedro/gdb/src/configure --enable-threading && make
...
configure: error: std::thread does not work; disable threading
make[1]: *** [Makefile:11225: configure-gdbsupport] Error 1
make[1]: Leaving directory '/home/pedro/gdb/build-windows-threads'
make: *** [Makefile:1041: all] Error 2
$
Additionally, if you don't explicitly pass --enable-threading, and
std::thread does not work, we will now get a warning (and the build
continues):
$ /home/pedro/gdb/src/configure && make
...
configure: WARNING: std::thread does not work; disabling threading
...
This is similar to how we handle --enable-tui and missing curses. The
code and error/warning messages were borrowed from there.
Change-Id: I73a8b580d1e2a796b23136920c0e181408ae1b22
Approved-By: Tom Tromey <tom@tromey.com>
|
|
With a x86_64-pc-mingw32 toolchain there is a build issue
whether or not the --disable-threading option is used.
The problem happens because _WIN32_WINNT is defined to 0x501
before #include <mutex> which makes the compilation abort
due to missing support for __gthread_cond_t in std_mutex.h,
which is conditional on _WIN32_WINNT >= 0x600.
Fix the case when --disable-threading is used, by only
including <mutex> in gdb/complaints.c when STD_CXX_THREAD
is defined.
Additionally make the configure script try to #include <mutex>
to automatically select --disable-threading when the header file
is not able to compile.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
Move it out of defs.h.
Change-Id: Ie1743d41a57f81667650048563e66073c72230cf
Approved-By: John Baldwin <jhb@FreeBSD.org>
|
|
In my occasional and continuing campaign against realloc, this patch
changes event-loop.cc to use std::vector to keep track of pollfd
objects. Regression tested on x86-64 Fedora 38.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Approved-By: John Baldwin <jhb@FreeBSD.org>
|
|
There is no reason the callers of these functions need to change the
returned string, so change the `char *` return types to `const char *`.
Update a few callers to also use `const char *`.
Change-Id: I94adff574d5e1b326e8cc688cf1817a15b408b96
Approved-By: Tom Tromey <tom@tromey.com>
|
|
When building with clang 18, I see:
CXX aarch64-linux-tdep.o
/home/smarchi/src/binutils-gdb/gdb/aarch64-linux-tdep.c:1299:26: error: variable length arrays in C++ are a Clang extension [-Werror,-Wvla-cxx-extension]
1299 | gdb_byte za_zeroed[za_bytes];
| ^~~~~~~~
/home/smarchi/src/binutils-gdb/gdb/aarch64-linux-tdep.c:1299:26: note: read of non-const variable 'za_bytes' is not allowed in a constant expression
/home/smarchi/src/binutils-gdb/gdb/aarch64-linux-tdep.c:1282:10: note: declared here
1282 | size_t za_bytes = std::pow (sve_vl_from_vg (svg), 2);
| ^
Since we are using VLAs right now, that warning doesn't make sense for
us. add `-Wno-vla-cxx-extension` to the list of warning flags we try to
enable. If we ever choose to disallow VLAs, we can remove that flag.
Change-Id: Ie41feafc50c343f6e75333d4f836ce32fbeb6d8c
|
|
Now that defs.h, server.h and common-defs.h are included via the
`-include` option, it is no longer necessary for source files to include
them. Remove all the inclusions of these files I could find. Update
the generation scripts where relevant.
Change-Id: Ia026cff269c1b7ae7386dd3619bc9bb6a5332837
Approved-By: Pedro Alves <pedro@palves.net>
|
|
The motivation for this change is for analysis tools and IDEs to be
better at analyzing header files on their own.
There are some definitions and includes we want to occur at the very
beginning of all translation units. The way we currently do that is by
requiring all source files (.c and .cc files) to include one of defs.h
(for gdb), server.h (for gdbserver) of common-defs.h (for gdbsupport and
shared source files). These special header files define and include
everything that needs to be included at the very beginning. Other
header files are written in a way that assume that these special
"prologue" header files have already been included.
My problem with that is that my editor (clangd-based) provides a very
bad experience when editing header files. Since clangd doesn't know
that one of defs.h/server.h/common-defs.h was included already, a lot of
things are flagged as errors. For instance, CORE_ADDR is not known.
It's possible to edit the files in this state, but a lot of the power of
the editor is unavailable.
My proposal to help with this is to include those things we always want
to be there using the compilers' `-include` option. Tom Tromey said
that the current approach might exist because not all compilers used to
have an option like this. But I believe that it's safe to assume they
do today.
With this change, clangd picks up the -include option from the compile
command, and is able to analyze the header file correctly, as it sees
all that stuff included or defined by that -include option. That works
because when editing a header file, clangd tries to get the compilation
flags from a source file that includes said header file.
This change is a bit self-serving, because it addresses one of my
frustrations when editing header files, but it might help others too.
I'd be curious to know if others encounter the same kinds of problems
when editing header files. Also, even if the change is not necessary by
any means, I think the solution of using -include for stuff we always
want to be there is more elegant than the current solution.
Even with this -include flag, many header files currently don't include
what they use, but rather depend on files included before them. This
will still cause errors when editing them, but it should be easily
fixable by adding the appropriate include. There's no rush to do so, as
long as the code still compiles, it's just a convenience thing.
The changes are:
- Add the appropriate `-include` option to the various Makefiles.
- There is one particularity for gdbserver's Makefile: we do not want
to include server.h when building `gdbreplay.o`, as `gdbreplay.cc`
doesn't include it. So we can't simply put the `-include` in
`INTERNAL_CFLAGS`. Add the `-include server.h` option to the
`COMPILE` and `IPAGENT_COMPILE` variables, and added a special rule
to compile `gdbreplay.o` with `-include gdbsupport/common-defs.h`.
- Remove the `-include` option from the `check-headers` rule in
gdb/Makefile.in, since it is already included in `INTERNAL_CFLAGS`.
Change-Id: If3e345d00a9fc42336322f1d8286687d22134340
Approved-By: Pedro Alves <pedro@palves.net>
|
|
Reformat some variables definitions. I think it makes them easier to
read, and it also makes diffs clearer.
Change-Id: I82f63ba0e6d0fe268eb1f1ad5ab22c3cd016ab02
Approved-By: Pedro Alves <pedro@palves.net>
|
|
This patch makes allocate_on_obstack a little bit safer, by enforcing
the rule that objects allocated on an obstack must have a trivial
destructor.
The static assert is done in a method -- doing it inside the class
itself won't work because the class is incomplete at that point.
|
|
I noticed in passing that the include guard in the file
gdbsupport/gdb-checked-static-cast.h was wrong, it includes the word
DYNAMIC when STATIC would be better, fixed in this commit.
There should be no user visible changes after this commit.
|
|
This commit:
commit 6fe4779ac4b1874c995345e3eabd89cb1a05fbdf
Date: Sat Feb 24 11:00:20 2024 +0100
[gdb/build] Fix static cast of virtual base
addressed an issue where GDB would not compile in production mode due
to a use of gdb::checked_static_cast. The problem was that we were
asking GDB to cast from a virtual base class to a sub-class, this
works fine when using dynamic_cast, but does not work with
static_cast.
The gdb::checked_static_cast actually uses dynamic_cast under the hood
in development mode in order to ensure that the cast is valid, while
in a production build we use static_cast as this is more efficient.
What this meant however, was that when gdb::checked_static_cast was
used to cast from a virtual base class, the dynamic_cast of a
non-production build worked fine, while the production build's
static_cast caused a build failure.
However, the gdb::checked_static_cast function already contains some
static_assert calls that are intended to catch any issues with invalid
type casting, the goal of these asserts was to prevent issues like
this: the build only failing in production mode. Clearly the current
asserts are not enough.
I don't think there is a std::is_virtual_base type trait check, so
what I propose instead is that in non-production mode we also make use
of static_cast. This will ensure that any errors that crop up in
production mode should also be revealed in non-production mode, and
should catch issues like this in the future.
There should be no user visible changes after this commit.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31399
Co-Authored-By: Simon Marchi <simon.marchi@polymtl.ca>
|
|
I tried building gdbserver on postmarketos (which is based on alpine linux,
which uses musl libc), and ran into:
...
gdbserver/linux-low.cc: In lambda function:
gdbserver/linux-low.cc:1907:41: error: \
'W_EXITCODE' was not declared in this scope
1907 | mark_lwp_dead (leader_lp, W_EXITCODE (0, 0), true);
| ^~~~~~~~~~
...
The macro W_EXITCODE is not defined in gdbsupport/gdb_wait.h.
OTOH, WSETEXIT is defined there, but unused:
...
/* These are not defined in POSIX, but are used by our programs. */
#ifndef WSETEXIT
# ifdef W_EXITCODE
#define WSETEXIT(w,status) ((w) = W_EXITCODE(status,0))
# else
#define WSETEXIT(w,status) ((w) = (0 | ((status) << 8)))
# endif
#endif
...
Fix this by dropping the WSETEXIT definition, and instead defining W_EXITCODE.
Tested on x86_64-linux, in combination with an "#undef W_EXITCODE" to make
sure the definition is exercised.
Approved-By: Tom Tromey <tom@tromey.com>
PR build/31483
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31483
|
|
This patch rewrites final cleanups to use std::function and otherwise
be more C++-ish.
|
|
This patch adds a new function, read_remainder_of_file. This is like
read_text_file_to_string, but reads from an existing 'FILE *'. This
will be used in a subsequent patch.
Reviewed-By: Tom de Vries <tdevries@suse.de>
|
|
The GDB build currently fails on x86-64 Cygwin, with:
src/gdbsupport/errors.cc: In function ‘void throw_winerror_with_name(const char*, ULONGEST)’:
src/gdbsupport/errors.cc:152:12: error: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ULONGEST’ {aka ‘long unsigned int’} [-Werror=format=]
152 | error (_("%s (error %d): %s"), string, err, strwinerror (err));
| ^
Fix this by adding a cast. While at it, the error codes are really a
DWORD that results from a GetLastError() call, so I think unsigned is
more appropriate. That is also what strwinerror already does:
sprintf (buf, "unknown win32 error (%u)", (unsigned) error);
The cast is necessary on MinGW GDB as well, where ULONGEST is unsigned
long long, but for some reason, I don't get a warning there.
Approved-By: Tom Tromey <tom@tromey.com>
Change-Id: I3f5faa779765fd8021abf58bb5f68d556b309d17
|
|
std::{is_trivially_constructible,is_trivially_copyable}
This code was there to support g++ 4, which didn't support
std::is_trivially_constructible and std::is_trivially_copyable. Since
we now require g++ >= 9, I think it's fair to assume that GDB will
always be compiled with a compiler that supports those.
Change-Id: Ie7c1649139a2f48bf662cac92d7f3e38fb1f1ba1
|
|
Since we now require C++17, and therefore gcc >= 9, it's no longer
useful to have gcc version checks for older gcc version.
Change-Id: I3a87baa03c475f2b847b422b16b69c5ff7215b54
Reviewed-by: Kevin Buettner <kevinb@redhat.com>
Approved-By: Pedro Alves <pedro@palves.net>
|
|
This commit is the result of the following actions:
- Running gdb/copyright.py to update all of the copyright headers to
include 2024,
- Manually updating a few files the copyright.py script told me to
update, these files had copyright headers embedded within the
file,
- Regenerating gdbsupport/Makefile.in to refresh it's copyright
date,
- Using grep to find other files that still mentioned 2023. If
these files were updated last year from 2022 to 2023 then I've
updated them this year to 2024.
I'm sure I've probably missed some dates. Feel free to fix them up as
you spot them.
|
|
No functional change here, just touch up generated output slightly.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
Only check these decls once in case other m4 macros also look for them.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
This is used by gdb, gdbsupport, and gdbserver. We want to use it
in the sim tree too. Move it to gdbsupport which is meant as the
common sharing space for these projects.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
Now that the DWARF reader does not use parallel_for_each, we can
remove some of the features that were added just for it: return values
and task sizing.
The thread_pool typed tasks feature could also be removed, but I
haven't done so here. This one seemed less intrusive and perhaps more
likely to be needed at some point.
|
|
This adds gdb::task_group, a convenient way to group background tasks
and then call a function when all the tasks have completed.
|
|
clang 16 reports a missing declaration in new-op.cc. We believed
these operators to be declared starting with C++14, but apparently
that is not the case.
This patch reverts the earlier change and then updates the comment to
reflect the current state.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31141
|
|
Change most of regcache (and base classes) to use array_view when
possible, instead of raw pointers. By propagating the use of array_view
further, it enables having some runtime checks to make sure the what we
read from or write to regcaches has the expected length (such as the one
in the `copy(array_view, array_view)` function. It also integrates well
when connecting with other APIs already using gdb::array_view.
Add some overloads of the methods using raw pointers to avoid having to
change all call sites at once (which is both a lot of work and risky).
I tried to do this change in small increments, but since many of these
functions use each other, it ended up simpler to do it in one shot than
having a lot of intermediary / transient changes.
This change extends into gdbserver as well, because there is some part
of the regcache interface that is shared.
Changing the reg_buffer_common interface to use array_view caused some
build failures in nat/aarch64-scalable-linux-ptrace.c. That file
currently "takes advantage" of the fact that
reg_buffer_common::{raw_supply,raw_collect} operates on `void *`, which
IMO is dangerous. It uses raw_supply/raw_collect directly on
uint64_t's, which I guess is fine because it is expected that native
code will have the same endianness as the debugged process. To
accomodate that, add some overloads of raw_collect and raw_supply that
work on uint64_t.
This file also uses raw_collect and raw_supply on `char` pointers.
Change it to use `gdb_byte` pointers instead. Add overloads of
raw_collect and raw_supply that work on `gdb_byte *` and make an
array_view on the fly using the register's size. Those call sites could
be converted to use array_view with not much work, in which case these
overloads could be removed, but I didn't want to do it in this patch, to
avoid starting to dig in arch-specific code.
During development, I inadvertently changed reg_buffer::raw_compare's
behavior to not accept an offset equal to the register size. This
behavior (effectively comparing 0 bytes, returning true) change was
caught by the AArch64 SME core tests. Add a selftest to make sure that
this raw_compare behavior is preserved in the future.
Change-Id: I9005f04114543ddff738949e12d85a31855304c2
Reviewed-By: John Baldwin <jhb@FreeBSD.org>
|
|
Right now, gdbsupport/common-regcache.h contains two abstractons for a
regcache. An opaque type `regcache` (gdb and gdbserver both have their
own regcache that is the concrete version of this) and an abstract base
class `reg_buffer_common`, that is the base of regcaches on both sides.
These abstractions allow code to be written for both gdb and gdbserver,
for instance in the gdb/arch sub-directory.
However, having two
different abstractions is impractical. If some common code has a regcache,
and wants to use an operation defined on reg_buffer_common, it can't.
It would be better to have just one. Change all instances of `regcache
*` in gdbsupport/common-regcache.h to be `reg_buffer_common *`, then fix
fallouts.
Implementations in gdb and gdbserver now need to down-cast (using
gdb::checked_static_cast) from reg_buffer_common to their concrete
regcache type. Some of them could be avoided by changing free functions
(like regcache_register_size) to be virtual methods on
reg_buffer_common. I tried it, it seems to work, but I did not include
it in this series to avoid adding unnecessary changes.
Change-Id: Ia5503adb6b5509a0f4604bd2a68b4642cc5283fd
Reviewed-by: John Baldwin <jhb@FreeBSD.org>
|
|
This commit enables the early initialization commands (92e4e97a9f5) to
modify the number of threads used by gdb's thread pool.
The motivation here is to prevent gdb from spawning a detrimental number
of threads on many-core systems under environments with restrictive
ulimits.
With gdb before this commit, the thread pool takes the following sizes:
1. Thread pool size is initialized to 0.
2. After the maintenance commands are defined, the thread pool size is
set to the number of system cores (if it has not already been set).
3. Using early initialization commands, the thread pool size can be
changed using "maint set worker-threads".
4. After the first prompt, the thread pool size can be changed as in the
previous step.
Therefore after step 2. gdb has potentially launched hundreds of threads
on a many-core system.
After this change, step 2 and 3 are reversed so there is an opportunity
to set the required number of threads without needing to default to the
number of system cores first.
There does exist a configure option (added in 261b07488b9) to disable
multithreading, but this does not allow for an already deployed gdb to
be configured.
Additionally, the default number of worker threads is clamped at eight
to control the number of worker threads spawned on many-core systems.
This value was chosen as testing recorded on bugzilla issue 29959
indicates that parallel efficiency drops past this point.
GDB built with GCC 13.
No test suite regressions detected. Compilers: GCC, ACfL, Intel, Intel
LLVM, NVHPC; Platforms: x86_64, aarch64.
The scenario that interests me the most involves preventing GDB from
spawning any worker threads at all. This was tested by counting the
number of clones observed by strace:
strace -e clone,clone3 gdb/gdb -q \
--early-init-eval-command="maint set worker-threads 0" \
-ex q ./gdb/gdb |& grep --count clone
The new test relies on "gdb: install CLI uiout while processing early
init files" developed by Andrew Burgess. This patch will need pushing
prior to this change.
The clamping was tested on machines with both 16 cores and a single
core. "maint show worker-threads" correctly reported eight and one
respectively.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
C++17 makes the second parameter to static_assert optional, so we can
remove gdb_static_assert now.
|
|
C++17 has void_t and make_void, so gdbsupport/traits.h can be
simplified.
Approved-By: Pedro Alves <pedro@palves.net>
|
|
gdbsupport/scope-exit.h has a couple of comments about being able to
rely on copy elision in C++17. This patch makes the change.
Approved-By: Pedro Alves <pedro@palves.net>
|
|
gdbsupport/new-op.cc has a comment about relying on the C++-17 <new>
header. This patch implements the suggestion.
Approved-By: Pedro Alves <pedro@palves.net>
|
|
This changes gdbsupport/array-view.h to enable some code that is
C++14-specific.
Approved-By: Pedro Alves <pedro@palves.net>
|
|
This changes the various gdb-related directories to use
-Wimplicit-fallthrough=5, meaning that only the fallthrough attribute
can be used in switches -- special 'fallthrough' comments will no
longer be usable.
Approved-By: Pedro Alves <pedro@palves.net>
|
|
This changes gdb to use the C++17 [[fallthrough]] attribute rather
than special comments.
This was mostly done by script, but I neglected a few spellings and so
also fixed it up by hand.
I suspect this fixes the bug mentioned below, by switching to a
standard approach that, presumably, clang supports.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=23159
Approved-By: John Baldwin <jhb@FreeBSD.org>
Approved-By: Luis Machado <luis.machado@arm.com>
Approved-By: Pedro Alves <pedro@palves.net>
|
|
When running test-case gdb.base/vfork-follow-parent.exp on powerpc64 (likewise
on s390x), I run into:
...
(gdb) PASS: gdb.base/vfork-follow-parent.exp: \
exec_file=vfork-follow-parent-exit: target-non-stop=on: non-stop=off: \
resolution_method=schedule-multiple: print unblock_parent = 1
continue^M
Continuing.^M
Reading symbols from vfork-follow-parent-exit...^M
^M
^M
Fatal signal: Segmentation fault^M
----- Backtrace -----^M
0x1027d3e7 gdb_internal_backtrace_1^M
src/gdb/bt-utils.c:122^M
0x1027d54f _Z22gdb_internal_backtracev^M
src/gdb/bt-utils.c:168^M
0x1057643f handle_fatal_signal^M
src/gdb/event-top.c:889^M
0x10576677 handle_sigsegv^M
src/gdb/event-top.c:962^M
0x3fffa7610477 ???^M
0x103f2144 for_each_block^M
src/gdb/dcache.c:199^M
0x103f235b _Z17dcache_invalidateP13dcache_struct^M
src/gdb/dcache.c:251^M
0x10bde8c7 _Z24target_dcache_invalidatev^M
src/gdb/target-dcache.c:50^M
...
or similar.
The root cause for the segmentation fault is that linux_is_uclinux gives an
incorrect result: it should always return false, given that we're running on a
regular linux system, but instead it returns first true, then false.
In more detail, the segmentation fault happens as follows:
- a program space with an address space is created
- a second program space is about to be created. maybe_new_address_space
is called, and because linux_is_uclinux returns true, maybe_new_address_space
returns false, and no new address space is created
- a second program space with the same address space is created
- a program space is deleted. Because linux_is_uclinux now returns false,
gdbarch_has_shared_address_space (current_inferior ()->arch ()) returns
false, and the address space is deleted
- when gdb uses the address space of the remaining program space, we run into
the segfault, because the address space is deleted.
Hardcoding linux_is_uclinux to false makes the test-case pass.
We leave addressing the root cause for the following commit in this series.
For now, prevent the segmentation fault by making the address space a refcounted
object.
This was already suggested here [1]:
...
A better solution might be to have the address spaces be reference counted
...
Tested on top of trunk on x86_64-linux and ppc64le-linux.
Tested on top of gdb-14-branch on ppc64-linux.
Co-Authored-By: Simon Marchi <simon.marchi@polymtl.ca>
PR gdb/30547
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30547
[1] https://sourceware.org/pipermail/gdb-patches/2023-October/202928.html
|
|
This introduces throw_winerror_with_name, a Windows analog of
perror_with_name, and changes various places in gdb to call it.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30770
|
|
Given that GDB now requires C++17, we can replace gdb::invoke_result
with std::invoke_result which is provided by <type_traits>.
This patch also removes gdbsupport/invoke-result.h as it is not used
anymore.
Change-Id: I7e567356d38d6b3d85d8797d61cfc83f6f933f22
Approved-By: Tom Tromey <tom@tromey.com>
Approved-By: Pedro Alves <pedro@palves.net>
|
|
Now that all places using gdb::string_view have been updated to use
std::string_view, this patch drops the gdb::string_view implementation
and the tests which came with it.
As this drops the unittests/string_view-selftests.c, this also
implicitly solves PR build/23676, as pointed-out by Tom Tromey.
Change-Id: Idf5479b09e0ac536917b3f0e13aca48424b90df0
Approved-By: Tom Tromey <tom@tromey.com>
Approved-By: Pedro Alves <pedro@palves.net>
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=23676
|
|
Given that GDB now requires a C++17, replace all uses of
gdb::string_view with std::string_view.
This change has mostly been done automatically:
- gdb::string_view -> std::string_view
- #include "gdbsupport/gdb_string_view.h" -> #include <string_view>
One things which got brought up during review is that gdb::stging_view
does support being built from "nullptr" while std::sting_view does not.
Two places are manually adjusted to account for this difference:
gdb/tui/tui-io.c:tui_getc_1 and
gdbsupport/format.h:format_piece::format_piece.
The above automatic change transformed
"gdb::to_string (const gdb::string_view &)" into
"gdb::to_string (const std::string_view &)". The various direct users
of this function are now explicitly including
"gdbsupport/gdb_string_view.h". A later patch will remove the users of
gdb::to_string.
The implementation and tests of gdb::string_view are unchanged, they will
be removed in a following patch.
Change-Id: Ibb806a7e9c79eb16a55c87c6e41ad396fecf0207
Approved-By: Tom Tromey <tom@tromey.com>
Approved-By: Pedro Alves <pedro@palves.net>
|
|
The previous patch migrated all the uses of gdb::optional to use
std::optional instead, so gdb::optional can be removed entirely
as well as the self-tests which came with it.
Change-Id: I96ecd67b850b01be10ef00eb85a78ac647d5adc7
Approved-By: Tom Tromey <tom@tromey.com>
Approved-By: Pedro Alves <pedro@palves.net>
|
|
Since GDB now requires C++17, we don't need the internally maintained
gdb::optional implementation. This patch does the following replacing:
- gdb::optional -> std::optional
- gdb::in_place -> std::in_place
- #include "gdbsupport/gdb_optional.h" -> #include <optional>
This change has mostly been done automatically. One exception is
gdbsupport/thread-pool.* which did not use the gdb:: prefix as it
already lives in the gdb namespace.
Change-Id: I19a92fa03e89637bab136c72e34fd351524f65e9
Approved-By: Tom Tromey <tom@tromey.com>
Approved-By: Pedro Alves <pedro@palves.net>
|
|
gdb::make_unique is a wrapper around std::make_unique when compiled with
C++17. Now that C++17 is required, use std::make_unique directly in the
codebase, and remove gdb::make_unique.
Change-Id: I80b615e46e4b7c097f09d78e579a9bdce00254ab
Approved-By: Tom Tromey <tom@tromey.com>
Approved-By: Pedro Alves <pedro@palves.net
|
|
* intl: Remove directory. Replaced with out-of-tree GNU gettext.
* .gitignore: Add '/gettext*'.
* configure.ac (host_libs): Replace intl with gettext. (hbaseargs, bbaseargs, baseargs): Split baseargs into {h,b}baseargs. (skip_barg): New flag. Skips appending current flag to bbaseargs. <library exemptions>: Exempt --with-libintl-{type,prefix} from target and build machine argument passing.
* configure: Regenerate.
* Makefile.def (host_modules): Replace intl module with gettext module. (configure-ld): Depend on configure-gettext.
* Makefile.in: Regenerate.
* src-release.sh: Remove references to the intl/ directory.
|
|
common-defs.h has a few defines that I suspect were used during the
transition to C++. These aren't needed any more, so remove them.
Tested by rebuilding.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Approved-By: Andrew Burgess <aburgess@redhat.com>
|
|
I (almost) had a bug where I did:
buffer.slice (...)
but I meant:
buffer = buffer.slice (...)
The first one does nothing, it creates a new array_view but without
using it, it's useless. Mark the slice methods with [[nodiscard]]
(which is standard C++17) so that error would generate a warning.
I guess that many functions could be marked as nodiscard, essentially
function that is pure (doesn't have side-effects). But this one seems
particularly easy to mis-use.
Change-Id: Ib39a0a65a5728a3cfd68a02ae31635810baeaccb
Approved-By: Tom Tromey <tom@tromey.com>
|
