| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Same as the previous patch, but for GDBserver. The return value of this
method is never used, change it to return void.
gdbserver/ChangeLog:
* linux-low.cc (linux_process_target::filter_event): Return
void.
* linux-low.h (class linux_process_target) <filter_event>:
Return void.
Change-Id: I79e5dc04d9b21b9f01c6d675fa463d1b1a703b3a
|
|
A following patch will add a new testcase that has two processes, each
with a number of threads constantly tripping a breakpoint and stepping
over it, because the breakpoint has a condition that evals false.
Then GDB detaches from one of the processes, while both processes are
running. And then the testcase sends a SIGUSR1 to the other process.
When run against gdbserver, that would occasionaly fail like this:
(gdb) PASS: gdb.threads/detach-step-over.exp: iter 1: detach
Executing on target: kill -SIGUSR1 208303 (timeout = 300)
spawn -ignore SIGHUP kill -SIGUSR1 208303
Thread 2.5 "detach-step-ove" received signal SIGTRAP, Trace/breakpoint trap.
[Switching to Thread 208303.208305]
0x000055555555522a in thread_func (arg=0x0) at /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.threads/detach-step-over.c:54
54 counter++; /* Set breakpoint here. */
What happened was that GDBserver is doing a step-over for process A
when a detach request for process B arrives. And that generates a
spurious SIGTRAP report for process A, as seen above.
The GDBserver logs reveal what happened:
- GDB manages to detach while a step over is in progress. That reaches
linux_process_target::complete_ongoing_step_over(), which does:
/* Passing NULL_PTID as filter indicates we want all events to
be left pending. Eventually this returns when there are no
unwaited-for children left. */
ret = wait_for_event_filtered (minus_one_ptid, null_ptid, &wstat,
__WALL);
As the comment say, this leaves all events pending, _including_ the
just finished step SIGTRAP. We never discard that SIGTRAP. So
GDBserver reports the SIGTRAP to GDB. GDB can't explain the
SIGTRAP, so it reports it to the user.
The GDBserver log looks like this. The LWP of interest is 208305:
Need step over [LWP 208305]? yes, found breakpoint at 0x555555555227
proceed_all_lwps: found thread 208305 needing a step-over
Starting step-over on LWP 208305. Stopping all threads
208305 starts a step-over.
>>>> entering void linux_process_target::stop_all_lwps(int, lwp_info*)
stop_all_lwps (stop-and-suspend, except=LWP 208303.208305)
Sending sigstop to lwp 208303
Sending sigstop to lwp 207755
wait_for_sigstop: pulling events
LWFE: waitpid(-1, ...) returned 207755, ERRNO-OK
LLW: waitpid 207755 received Stopped (signal) (stopped)
pc is 0x7f7e045593bf
Expected stop.
LLW: SIGSTOP caught for LWP 207755.207755 while stopping threads.
LWFE: waitpid(-1, ...) returned 208303, ERRNO-OK
LLW: waitpid 208303 received Stopped (signal) (stopped)
pc is 0x7ffff7e743bf
Expected stop.
LLW: SIGSTOP caught for LWP 208303.208303 while stopping threads.
LWFE: waitpid(-1, ...) returned 0, ERRNO-OK
leader_pid=208303, leader_lp!=NULL=1, num_lwps=11, zombie=0
leader_pid=207755, leader_lp!=NULL=1, num_lwps=11, zombie=0
LLW: exit (no unwaited-for LWP)
stop_all_lwps done, setting stopping_threads back to !stopping
<<<< exiting void linux_process_target::stop_all_lwps(int, lwp_info*)
Done stopping all threads for step-over.
pc is 0x555555555227
Writing 8b to 0x555555555227 in process 208305
Could not findsigchld_handler
fast tracepoint jump at 0x555555555227 in list (uninserting).
pending reinsert at 0x555555555227
step from pc 0x555555555227
Resuming lwp 208305 (step, signal 0, stop expected)
<<<< exiting ptid_t linux_process_target::wait_1(ptid_t, target_waitstatus*, target_wait_flags)
handling possible serial event
getpkt ("D;32b8b"); [no ack sent]
The detach request arrives.
sigchld_handler
Tracing is already off, ignoring
detach: step over in progress, finish it first
GDBserver realizes a step over for 208305 was in progress, let's it
finish.
LWFE: waitpid(-1, ...) returned 208305, ERRNO-OK
LLW: waitpid 208305 received Stopped (signal) (stopped)
pc is 0x555555555227
Expected stop.
LLW: step LWP 208303.208305, 0, 0 (discard delayed SIGSTOP)
pending reinsert at 0x555555555227
step from pc 0x555555555227
Resuming lwp 208305 (step, signal 0, stop not expected)
LWFE: waitpid(-1, ...) returned 0, ERRNO-OK
leader_pid=208303, leader_lp!=NULL=1, num_lwps=11, zombie=0
leader_pid=207755, leader_lp!=NULL=1, num_lwps=11, zombie=0
sigsuspend'ing
LWFE: waitpid(-1, ...) returned 208305, ERRNO-OK
LLW: waitpid 208305 received Trace/breakpoint trap (stopped)
pc is 0x55555555522a
CSBB: LWP 208303.208305 stopped by trace
LWFE: waitpid(-1, ...) returned 0, ERRNO-OK
leader_pid=208303, leader_lp!=NULL=1, num_lwps=11, zombie=0
leader_pid=207755, leader_lp!=NULL=1, num_lwps=11, zombie=0
LLW: exit (no unwaited-for LWP)
Finished step over.
The step-over for 208305 finishes.
Writing cc to 0x555555555227 in process 208305
Could not find fast tracepoint jump at 0x555555555227 in list (reinserting).
>>>> entering void linux_process_target::stop_all_lwps(int, lwp_info*)
stop_all_lwps (stop, except=none)
wait_for_sigstop: pulling events
The detach proceeds (snipped).
...
proceed_one_lwp: lwp 208305
LWP 208305 has pending status, leaving stopped
Later on, 208305 has a pending status (the step SIGTRAP from the
step-over), so GDBserver starts the process of reporting it.
...
wait_1 ret = LWP 208303.208305, 1, 5
<<<< exiting ptid_t linux_process_target::wait_1(ptid_t, target_waitstatus*, target_wait_flags)
...
and eventually GDB receives the stop notification (T05 == SIGTRAP):
getpkt ("vStopped"); [no ack sent]
sigchld_handler
vStopped: acking 3
Writing resume reply for LWP 208303.208305:1
putpkt ("$T0506:f0ee58f7ff7f0* ;07:f0ee58f7ff7f0* ;10:2a525*"550* ;thread:p32daf.32db1;core:c;#37"); [noack mode]
From the GDB side, we see:
[infrun] fetch_inferior_event: enter
[infrun] fetch_inferior_event: fetch_inferior_event enter
[infrun] do_target_wait: Found 2 inferiors, starting at #1
[infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) =
[infrun] print_target_wait_results: 208303.208305.0 [Thread 208303.208305],
[infrun] print_target_wait_results: status->kind = stopped, signal = GDB_SIGNAL_TRAP
[infrun] handle_inferior_event: status->kind = stopped, signal = GDB_SIGNAL_TRAP
[infrun] start_step_over: enter
[infrun] start_step_over: stealing global queue of threads to step, length = 6
[infrun] operator(): putting back 6 threads to step in global queue
[infrun] start_step_over: exit
[infrun] handle_signal_stop: context switch
[infrun] context_switch: Switching context from process 0 to Thread 208303.208305
[infrun] handle_signal_stop: stop_pc=0x55555555522a
[infrun] handle_signal_stop: random signal (GDB_SIGNAL_TRAP)
[infrun] stop_waiting: stop_waiting
[infrun] stop_all_threads: starting
The fix is to discard the step SIGTRAP, unless GDB wanted the thread
to step.
gdbserver/ChangeLog:
* linux-low.cc (linux_process_target::complete_ongoing_step_over):
Discard step SIGTRAP, unless GDB wanted the thread to step.
|
|
I'm trying to enable clang's -Wmissing-variable-declarations warning.
This patch fixes all the obvious spots where we can simply add "static"
(at least, found when building on x86-64 Linux).
gdb/ChangeLog:
* aarch64-linux-tdep.c (aarch64_linux_record_tdep): Make static.
* aarch64-tdep.c (tdesc_aarch64_list, aarch64_prologue_unwind,
aarch64_stub_unwind, aarch64_normal_base, ): Make static.
* arm-linux-tdep.c (arm_prologue_unwind): Make static.
* arm-tdep.c (struct frame_unwind): Make static.
* auto-load.c (auto_load_safe_path_vec): Make static.
* csky-tdep.c (csky_stub_unwind): Make static.
* gdbarch.c (gdbarch_data_registry): Make static.
* gnu-v2-abi.c (gnu_v2_abi_ops): Make static.
* i386-netbsd-tdep.c (i386nbsd_mc_reg_offset): Make static.
* i386-tdep.c (i386_frame_setup_skip_insns,
i386_tramp_chain_in_reg_insns, i386_tramp_chain_on_stack_insns):
Make static.
* infrun.c (observer_mode): Make static.
* linux-nat.c (sigchld_action): Make static.
* linux-thread-db.c (thread_db_list): Make static.
* maint-test-options.c (maintenance_test_options_list):
* mep-tdep.c (mep_csr_registers): Make static.
* mi/mi-cmds.c (struct mi_cmd_stats): Remove struct type name.
(stats): Make static.
* nat/linux-osdata.c (struct osdata_type): Make static.
* ppc-netbsd-tdep.c (ppcnbsd_reg_offsets): Make static.
* progspace.c (last_program_space_num): Make static.
* python/py-param.c (struct parm_constant): Remove struct type
name.
(parm_constants): Make static.
* python/py-record-btrace.c (btpy_list_methods): Make static.
* python/py-record.c (recpy_gap_type): Make static.
* record.c (record_goto_cmdlist): Make static.
* regcache.c (regcache_descr_handle): Make static.
* registry.h (DEFINE_REGISTRY): Make definition static.
* symmisc.c (std_in, std_out, std_err): Make static.
* top.c (previous_saved_command_line): Make static.
* tracepoint.c (trace_user, trace_notes, trace_stop_notes): Make
static.
* unittests/command-def-selftests.c (nr_duplicates,
nr_invalid_prefixcmd, lists): Make static.
* unittests/observable-selftests.c (test_notification): Make
static.
* unittests/optional/assignment/1.cc (counter): Make static.
* unittests/optional/assignment/2.cc (counter): Make static.
* unittests/optional/assignment/3.cc (counter): Make static.
* unittests/optional/assignment/4.cc (counter): Make static.
* unittests/optional/assignment/5.cc (counter): Make static.
* unittests/optional/assignment/6.cc (counter): Make static.
gdbserver/ChangeLog:
* ax.cc (bytecode_address_table): Make static.
* debug.cc (debug_file): Make static.
* linux-low.cc (stopping_threads): Make static.
(step_over_bkpt): Make static.
* linux-x86-low.cc (amd64_emit_ops, i386_emit_ops): Make static.
* tracepoint.cc (stop_tracing_bkpt, flush_trace_buffer_bkpt,
alloced_trace_state_variables, trace_buffer_ctrl,
tracing_start_time, tracing_stop_time, tracing_user_name,
tracing_notes, tracing_stop_note): Make static.
Change-Id: Ic1d8034723b7802502bda23770893be2338ab020
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
Many spots incorrectly use only spaces for indentation (for example,
there are a lot of spots in ada-lang.c). I've always found it awkward
when I needed to edit one of these spots: do I keep the original wrong
indentation, or do I fix it? What if the lines around it are also
wrong, do I fix them too? I probably don't want to fix them in the same
patch, to avoid adding noise to my patch.
So I propose to fix as much as possible once and for all (hopefully).
One typical counter argument for this is that it makes code archeology
more difficult, because git-blame will show this commit as the last
change for these lines. My counter counter argument is: when
git-blaming, you often need to do "blame the file at the parent commit"
anyway, to go past some other refactor that touched the line you are
interested in, but is not the change you are looking for. So you
already need a somewhat efficient way to do this.
Using some interactive tool, rather than plain git-blame, makes this
trivial. For example, I use "tig blame <file>", where going back past
the commit that changed the currently selected line is one keystroke.
It looks like Magit in Emacs does it too (though I've never used it).
Web viewers of Github and Gitlab do it too. My point is that it won't
really make archeology more difficult.
The other typical counter argument is that it will cause conflicts with
existing patches. That's true... but it's a one time cost, and those
are not conflicts that are difficult to resolve. I have also tried "git
rebase --ignore-whitespace", it seems to work well. Although that will
re-introduce the faulty indentation, so one needs to take care of fixing
the indentation in the patch after that (which is easy).
gdb/ChangeLog:
* aarch64-linux-tdep.c: Fix indentation.
* aarch64-ravenscar-thread.c: Fix indentation.
* aarch64-tdep.c: Fix indentation.
* aarch64-tdep.h: Fix indentation.
* ada-lang.c: Fix indentation.
* ada-lang.h: Fix indentation.
* ada-tasks.c: Fix indentation.
* ada-typeprint.c: Fix indentation.
* ada-valprint.c: Fix indentation.
* ada-varobj.c: Fix indentation.
* addrmap.c: Fix indentation.
* addrmap.h: Fix indentation.
* agent.c: Fix indentation.
* aix-thread.c: Fix indentation.
* alpha-bsd-nat.c: Fix indentation.
* alpha-linux-tdep.c: Fix indentation.
* alpha-mdebug-tdep.c: Fix indentation.
* alpha-nbsd-tdep.c: Fix indentation.
* alpha-obsd-tdep.c: Fix indentation.
* alpha-tdep.c: Fix indentation.
* amd64-bsd-nat.c: Fix indentation.
* amd64-darwin-tdep.c: Fix indentation.
* amd64-linux-nat.c: Fix indentation.
* amd64-linux-tdep.c: Fix indentation.
* amd64-nat.c: Fix indentation.
* amd64-obsd-tdep.c: Fix indentation.
* amd64-tdep.c: Fix indentation.
* amd64-windows-tdep.c: Fix indentation.
* annotate.c: Fix indentation.
* arc-tdep.c: Fix indentation.
* arch-utils.c: Fix indentation.
* arch/arm-get-next-pcs.c: Fix indentation.
* arch/arm.c: Fix indentation.
* arm-linux-nat.c: Fix indentation.
* arm-linux-tdep.c: Fix indentation.
* arm-nbsd-tdep.c: Fix indentation.
* arm-pikeos-tdep.c: Fix indentation.
* arm-tdep.c: Fix indentation.
* arm-tdep.h: Fix indentation.
* arm-wince-tdep.c: Fix indentation.
* auto-load.c: Fix indentation.
* auxv.c: Fix indentation.
* avr-tdep.c: Fix indentation.
* ax-gdb.c: Fix indentation.
* ax-general.c: Fix indentation.
* bfin-linux-tdep.c: Fix indentation.
* block.c: Fix indentation.
* block.h: Fix indentation.
* blockframe.c: Fix indentation.
* bpf-tdep.c: Fix indentation.
* break-catch-sig.c: Fix indentation.
* break-catch-syscall.c: Fix indentation.
* break-catch-throw.c: Fix indentation.
* breakpoint.c: Fix indentation.
* breakpoint.h: Fix indentation.
* bsd-uthread.c: Fix indentation.
* btrace.c: Fix indentation.
* build-id.c: Fix indentation.
* buildsym-legacy.h: Fix indentation.
* buildsym.c: Fix indentation.
* c-typeprint.c: Fix indentation.
* c-valprint.c: Fix indentation.
* c-varobj.c: Fix indentation.
* charset.c: Fix indentation.
* cli/cli-cmds.c: Fix indentation.
* cli/cli-decode.c: Fix indentation.
* cli/cli-decode.h: Fix indentation.
* cli/cli-script.c: Fix indentation.
* cli/cli-setshow.c: Fix indentation.
* coff-pe-read.c: Fix indentation.
* coffread.c: Fix indentation.
* compile/compile-cplus-types.c: Fix indentation.
* compile/compile-object-load.c: Fix indentation.
* compile/compile-object-run.c: Fix indentation.
* completer.c: Fix indentation.
* corefile.c: Fix indentation.
* corelow.c: Fix indentation.
* cp-abi.h: Fix indentation.
* cp-namespace.c: Fix indentation.
* cp-support.c: Fix indentation.
* cp-valprint.c: Fix indentation.
* cris-linux-tdep.c: Fix indentation.
* cris-tdep.c: Fix indentation.
* darwin-nat-info.c: Fix indentation.
* darwin-nat.c: Fix indentation.
* darwin-nat.h: Fix indentation.
* dbxread.c: Fix indentation.
* dcache.c: Fix indentation.
* disasm.c: Fix indentation.
* dtrace-probe.c: Fix indentation.
* dwarf2/abbrev.c: Fix indentation.
* dwarf2/attribute.c: Fix indentation.
* dwarf2/expr.c: Fix indentation.
* dwarf2/frame.c: Fix indentation.
* dwarf2/index-cache.c: Fix indentation.
* dwarf2/index-write.c: Fix indentation.
* dwarf2/line-header.c: Fix indentation.
* dwarf2/loc.c: Fix indentation.
* dwarf2/macro.c: Fix indentation.
* dwarf2/read.c: Fix indentation.
* dwarf2/read.h: Fix indentation.
* elfread.c: Fix indentation.
* eval.c: Fix indentation.
* event-top.c: Fix indentation.
* exec.c: Fix indentation.
* exec.h: Fix indentation.
* expprint.c: Fix indentation.
* f-lang.c: Fix indentation.
* f-typeprint.c: Fix indentation.
* f-valprint.c: Fix indentation.
* fbsd-nat.c: Fix indentation.
* fbsd-tdep.c: Fix indentation.
* findvar.c: Fix indentation.
* fork-child.c: Fix indentation.
* frame-unwind.c: Fix indentation.
* frame-unwind.h: Fix indentation.
* frame.c: Fix indentation.
* frv-linux-tdep.c: Fix indentation.
* frv-tdep.c: Fix indentation.
* frv-tdep.h: Fix indentation.
* ft32-tdep.c: Fix indentation.
* gcore.c: Fix indentation.
* gdb_bfd.c: Fix indentation.
* gdbarch.sh: Fix indentation.
* gdbarch.c: Re-generate
* gdbarch.h: Re-generate.
* gdbcore.h: Fix indentation.
* gdbthread.h: Fix indentation.
* gdbtypes.c: Fix indentation.
* gdbtypes.h: Fix indentation.
* glibc-tdep.c: Fix indentation.
* gnu-nat.c: Fix indentation.
* gnu-nat.h: Fix indentation.
* gnu-v2-abi.c: Fix indentation.
* gnu-v3-abi.c: Fix indentation.
* go32-nat.c: Fix indentation.
* guile/guile-internal.h: Fix indentation.
* guile/scm-cmd.c: Fix indentation.
* guile/scm-frame.c: Fix indentation.
* guile/scm-iterator.c: Fix indentation.
* guile/scm-math.c: Fix indentation.
* guile/scm-ports.c: Fix indentation.
* guile/scm-pretty-print.c: Fix indentation.
* guile/scm-value.c: Fix indentation.
* h8300-tdep.c: Fix indentation.
* hppa-linux-nat.c: Fix indentation.
* hppa-linux-tdep.c: Fix indentation.
* hppa-nbsd-nat.c: Fix indentation.
* hppa-nbsd-tdep.c: Fix indentation.
* hppa-obsd-nat.c: Fix indentation.
* hppa-tdep.c: Fix indentation.
* hppa-tdep.h: Fix indentation.
* i386-bsd-nat.c: Fix indentation.
* i386-darwin-nat.c: Fix indentation.
* i386-darwin-tdep.c: Fix indentation.
* i386-dicos-tdep.c: Fix indentation.
* i386-gnu-nat.c: Fix indentation.
* i386-linux-nat.c: Fix indentation.
* i386-linux-tdep.c: Fix indentation.
* i386-nto-tdep.c: Fix indentation.
* i386-obsd-tdep.c: Fix indentation.
* i386-sol2-nat.c: Fix indentation.
* i386-tdep.c: Fix indentation.
* i386-tdep.h: Fix indentation.
* i386-windows-tdep.c: Fix indentation.
* i387-tdep.c: Fix indentation.
* i387-tdep.h: Fix indentation.
* ia64-libunwind-tdep.c: Fix indentation.
* ia64-libunwind-tdep.h: Fix indentation.
* ia64-linux-nat.c: Fix indentation.
* ia64-linux-tdep.c: Fix indentation.
* ia64-tdep.c: Fix indentation.
* ia64-tdep.h: Fix indentation.
* ia64-vms-tdep.c: Fix indentation.
* infcall.c: Fix indentation.
* infcmd.c: Fix indentation.
* inferior.c: Fix indentation.
* infrun.c: Fix indentation.
* iq2000-tdep.c: Fix indentation.
* language.c: Fix indentation.
* linespec.c: Fix indentation.
* linux-fork.c: Fix indentation.
* linux-nat.c: Fix indentation.
* linux-tdep.c: Fix indentation.
* linux-thread-db.c: Fix indentation.
* lm32-tdep.c: Fix indentation.
* m2-lang.c: Fix indentation.
* m2-typeprint.c: Fix indentation.
* m2-valprint.c: Fix indentation.
* m32c-tdep.c: Fix indentation.
* m32r-linux-tdep.c: Fix indentation.
* m32r-tdep.c: Fix indentation.
* m68hc11-tdep.c: Fix indentation.
* m68k-bsd-nat.c: Fix indentation.
* m68k-linux-nat.c: Fix indentation.
* m68k-linux-tdep.c: Fix indentation.
* m68k-tdep.c: Fix indentation.
* machoread.c: Fix indentation.
* macrocmd.c: Fix indentation.
* macroexp.c: Fix indentation.
* macroscope.c: Fix indentation.
* macrotab.c: Fix indentation.
* macrotab.h: Fix indentation.
* main.c: Fix indentation.
* mdebugread.c: Fix indentation.
* mep-tdep.c: Fix indentation.
* mi/mi-cmd-catch.c: Fix indentation.
* mi/mi-cmd-disas.c: Fix indentation.
* mi/mi-cmd-env.c: Fix indentation.
* mi/mi-cmd-stack.c: Fix indentation.
* mi/mi-cmd-var.c: Fix indentation.
* mi/mi-cmds.c: Fix indentation.
* mi/mi-main.c: Fix indentation.
* mi/mi-parse.c: Fix indentation.
* microblaze-tdep.c: Fix indentation.
* minidebug.c: Fix indentation.
* minsyms.c: Fix indentation.
* mips-linux-nat.c: Fix indentation.
* mips-linux-tdep.c: Fix indentation.
* mips-nbsd-tdep.c: Fix indentation.
* mips-tdep.c: Fix indentation.
* mn10300-linux-tdep.c: Fix indentation.
* mn10300-tdep.c: Fix indentation.
* moxie-tdep.c: Fix indentation.
* msp430-tdep.c: Fix indentation.
* namespace.h: Fix indentation.
* nat/fork-inferior.c: Fix indentation.
* nat/gdb_ptrace.h: Fix indentation.
* nat/linux-namespaces.c: Fix indentation.
* nat/linux-osdata.c: Fix indentation.
* nat/netbsd-nat.c: Fix indentation.
* nat/x86-dregs.c: Fix indentation.
* nbsd-nat.c: Fix indentation.
* nbsd-tdep.c: Fix indentation.
* nios2-linux-tdep.c: Fix indentation.
* nios2-tdep.c: Fix indentation.
* nto-procfs.c: Fix indentation.
* nto-tdep.c: Fix indentation.
* objfiles.c: Fix indentation.
* objfiles.h: Fix indentation.
* opencl-lang.c: Fix indentation.
* or1k-tdep.c: Fix indentation.
* osabi.c: Fix indentation.
* osabi.h: Fix indentation.
* osdata.c: Fix indentation.
* p-lang.c: Fix indentation.
* p-typeprint.c: Fix indentation.
* p-valprint.c: Fix indentation.
* parse.c: Fix indentation.
* ppc-linux-nat.c: Fix indentation.
* ppc-linux-tdep.c: Fix indentation.
* ppc-nbsd-nat.c: Fix indentation.
* ppc-nbsd-tdep.c: Fix indentation.
* ppc-obsd-nat.c: Fix indentation.
* ppc-ravenscar-thread.c: Fix indentation.
* ppc-sysv-tdep.c: Fix indentation.
* ppc64-tdep.c: Fix indentation.
* printcmd.c: Fix indentation.
* proc-api.c: Fix indentation.
* producer.c: Fix indentation.
* producer.h: Fix indentation.
* prologue-value.c: Fix indentation.
* prologue-value.h: Fix indentation.
* psymtab.c: Fix indentation.
* python/py-arch.c: Fix indentation.
* python/py-bpevent.c: Fix indentation.
* python/py-event.c: Fix indentation.
* python/py-event.h: Fix indentation.
* python/py-finishbreakpoint.c: Fix indentation.
* python/py-frame.c: Fix indentation.
* python/py-framefilter.c: Fix indentation.
* python/py-inferior.c: Fix indentation.
* python/py-infthread.c: Fix indentation.
* python/py-objfile.c: Fix indentation.
* python/py-prettyprint.c: Fix indentation.
* python/py-registers.c: Fix indentation.
* python/py-signalevent.c: Fix indentation.
* python/py-stopevent.c: Fix indentation.
* python/py-stopevent.h: Fix indentation.
* python/py-threadevent.c: Fix indentation.
* python/py-tui.c: Fix indentation.
* python/py-unwind.c: Fix indentation.
* python/py-value.c: Fix indentation.
* python/py-xmethods.c: Fix indentation.
* python/python-internal.h: Fix indentation.
* python/python.c: Fix indentation.
* ravenscar-thread.c: Fix indentation.
* record-btrace.c: Fix indentation.
* record-full.c: Fix indentation.
* record.c: Fix indentation.
* reggroups.c: Fix indentation.
* regset.h: Fix indentation.
* remote-fileio.c: Fix indentation.
* remote.c: Fix indentation.
* reverse.c: Fix indentation.
* riscv-linux-tdep.c: Fix indentation.
* riscv-ravenscar-thread.c: Fix indentation.
* riscv-tdep.c: Fix indentation.
* rl78-tdep.c: Fix indentation.
* rs6000-aix-tdep.c: Fix indentation.
* rs6000-lynx178-tdep.c: Fix indentation.
* rs6000-nat.c: Fix indentation.
* rs6000-tdep.c: Fix indentation.
* rust-lang.c: Fix indentation.
* rx-tdep.c: Fix indentation.
* s12z-tdep.c: Fix indentation.
* s390-linux-tdep.c: Fix indentation.
* score-tdep.c: Fix indentation.
* ser-base.c: Fix indentation.
* ser-mingw.c: Fix indentation.
* ser-uds.c: Fix indentation.
* ser-unix.c: Fix indentation.
* serial.c: Fix indentation.
* sh-linux-tdep.c: Fix indentation.
* sh-nbsd-tdep.c: Fix indentation.
* sh-tdep.c: Fix indentation.
* skip.c: Fix indentation.
* sol-thread.c: Fix indentation.
* solib-aix.c: Fix indentation.
* solib-darwin.c: Fix indentation.
* solib-frv.c: Fix indentation.
* solib-svr4.c: Fix indentation.
* solib.c: Fix indentation.
* source.c: Fix indentation.
* sparc-linux-tdep.c: Fix indentation.
* sparc-nbsd-tdep.c: Fix indentation.
* sparc-obsd-tdep.c: Fix indentation.
* sparc-ravenscar-thread.c: Fix indentation.
* sparc-tdep.c: Fix indentation.
* sparc64-linux-tdep.c: Fix indentation.
* sparc64-nbsd-tdep.c: Fix indentation.
* sparc64-obsd-tdep.c: Fix indentation.
* sparc64-tdep.c: Fix indentation.
* stabsread.c: Fix indentation.
* stack.c: Fix indentation.
* stap-probe.c: Fix indentation.
* stubs/ia64vms-stub.c: Fix indentation.
* stubs/m32r-stub.c: Fix indentation.
* stubs/m68k-stub.c: Fix indentation.
* stubs/sh-stub.c: Fix indentation.
* stubs/sparc-stub.c: Fix indentation.
* symfile-mem.c: Fix indentation.
* symfile.c: Fix indentation.
* symfile.h: Fix indentation.
* symmisc.c: Fix indentation.
* symtab.c: Fix indentation.
* symtab.h: Fix indentation.
* target-float.c: Fix indentation.
* target.c: Fix indentation.
* target.h: Fix indentation.
* tic6x-tdep.c: Fix indentation.
* tilegx-linux-tdep.c: Fix indentation.
* tilegx-tdep.c: Fix indentation.
* top.c: Fix indentation.
* tracefile-tfile.c: Fix indentation.
* tracepoint.c: Fix indentation.
* tui/tui-disasm.c: Fix indentation.
* tui/tui-io.c: Fix indentation.
* tui/tui-regs.c: Fix indentation.
* tui/tui-stack.c: Fix indentation.
* tui/tui-win.c: Fix indentation.
* tui/tui-winsource.c: Fix indentation.
* tui/tui.c: Fix indentation.
* typeprint.c: Fix indentation.
* ui-out.h: Fix indentation.
* unittests/copy_bitwise-selftests.c: Fix indentation.
* unittests/memory-map-selftests.c: Fix indentation.
* utils.c: Fix indentation.
* v850-tdep.c: Fix indentation.
* valarith.c: Fix indentation.
* valops.c: Fix indentation.
* valprint.c: Fix indentation.
* valprint.h: Fix indentation.
* value.c: Fix indentation.
* value.h: Fix indentation.
* varobj.c: Fix indentation.
* vax-tdep.c: Fix indentation.
* windows-nat.c: Fix indentation.
* windows-tdep.c: Fix indentation.
* xcoffread.c: Fix indentation.
* xml-syscall.c: Fix indentation.
* xml-tdesc.c: Fix indentation.
* xstormy16-tdep.c: Fix indentation.
* xtensa-config.c: Fix indentation.
* xtensa-linux-nat.c: Fix indentation.
* xtensa-linux-tdep.c: Fix indentation.
* xtensa-tdep.c: Fix indentation.
gdbserver/ChangeLog:
* ax.cc: Fix indentation.
* dll.cc: Fix indentation.
* inferiors.h: Fix indentation.
* linux-low.cc: Fix indentation.
* linux-nios2-low.cc: Fix indentation.
* linux-ppc-ipa.cc: Fix indentation.
* linux-ppc-low.cc: Fix indentation.
* linux-x86-low.cc: Fix indentation.
* linux-xtensa-low.cc: Fix indentation.
* regcache.cc: Fix indentation.
* server.cc: Fix indentation.
* tracepoint.cc: Fix indentation.
gdbsupport/ChangeLog:
* common-exceptions.h: Fix indentation.
* event-loop.cc: Fix indentation.
* fileio.cc: Fix indentation.
* filestuff.cc: Fix indentation.
* gdb-dlfcn.cc: Fix indentation.
* gdb_string_view.h: Fix indentation.
* job-control.cc: Fix indentation.
* signals.cc: Fix indentation.
Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
|
|
Update allocate_target_description to return a target_desc_up, a
specialisation of unique_ptr.
This commit does not attempt to make use of the unique_ptr in the
best possible way, in almost all cases we immediately release the
pointer from within the unique_ptr and then continue as before.
There are a few places where it was easy to handle the unique_ptr, and
in these cases I've done that.
Everything under gdb/features/* is auto-regenerated.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* arch/aarch32.c (aarch32_create_target_description): Release
unique_ptr returned from allocate_target_description.
* arch/aarch64.c (aarch64_create_target_description): Likewise.
* arch/amd64.c (amd64_create_target_description): Likewise.
* arch/arc.c (arc_create_target_description): Likewise.
* arch/arm.c (arm_create_target_description): Likewise.
* arch/i386.c (i386_create_target_description): Likewise.
* arch/riscv.c (riscv_create_target_description): Update return
type. Handle allocate_target_description returning a unique_ptr.
(riscv_lookup_target_description): Update to handle unique_ptr.
* arch/tic6x.c (tic6x_create_target_description): Release
unique_ptr returned from allocate_target_description.
* features/microblaze-with-stack-protect.c: Regenerate.
* features/microblaze.c: Regenerate.
* features/mips-dsp-linux.c: Regenerate.
* features/mips-linux.c: Regenerate.
* features/mips64-dsp-linux.c: Regenerate.
* features/mips64-linux.c: Regenerate.
* features/nds32.c: Regenerate.
* features/nios2.c: Regenerate.
* features/or1k.c: Regenerate.
* features/rs6000/powerpc-32.c: Regenerate.
* features/rs6000/powerpc-32l.c: Regenerate.
* features/rs6000/powerpc-403.c: Regenerate.
* features/rs6000/powerpc-403gc.c: Regenerate.
* features/rs6000/powerpc-405.c: Regenerate.
* features/rs6000/powerpc-505.c: Regenerate.
* features/rs6000/powerpc-601.c: Regenerate.
* features/rs6000/powerpc-602.c: Regenerate.
* features/rs6000/powerpc-603.c: Regenerate.
* features/rs6000/powerpc-604.c: Regenerate.
* features/rs6000/powerpc-64.c: Regenerate.
* features/rs6000/powerpc-64l.c: Regenerate.
* features/rs6000/powerpc-7400.c: Regenerate.
* features/rs6000/powerpc-750.c: Regenerate.
* features/rs6000/powerpc-860.c: Regenerate.
* features/rs6000/powerpc-altivec32.c: Regenerate.
* features/rs6000/powerpc-altivec32l.c: Regenerate.
* features/rs6000/powerpc-altivec64.c: Regenerate.
* features/rs6000/powerpc-altivec64l.c: Regenerate.
* features/rs6000/powerpc-e500.c: Regenerate.
* features/rs6000/powerpc-e500l.c: Regenerate.
* features/rs6000/powerpc-isa205-32l.c: Regenerate.
* features/rs6000/powerpc-isa205-64l.c: Regenerate.
* features/rs6000/powerpc-isa205-altivec32l.c: Regenerate.
* features/rs6000/powerpc-isa205-altivec64l.c: Regenerate.
* features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.c: Regenerate.
* features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.c: Regenerate.
* features/rs6000/powerpc-isa205-vsx32l.c: Regenerate.
* features/rs6000/powerpc-isa205-vsx64l.c: Regenerate.
* features/rs6000/powerpc-isa207-htm-vsx32l.c: Regenerate.
* features/rs6000/powerpc-isa207-htm-vsx64l.c: Regenerate.
* features/rs6000/powerpc-isa207-vsx32l.c: Regenerate.
* features/rs6000/powerpc-isa207-vsx64l.c: Regenerate.
* features/rs6000/powerpc-vsx32.c: Regenerate.
* features/rs6000/powerpc-vsx32l.c: Regenerate.
* features/rs6000/powerpc-vsx64.c: Regenerate.
* features/rs6000/powerpc-vsx64l.c: Regenerate.
* features/rs6000/rs6000.c: Regenerate.
* features/rx.c: Regenerate.
* features/s390-gs-linux64.c: Regenerate.
* features/s390-linux32.c: Regenerate.
* features/s390-linux32v1.c: Regenerate.
* features/s390-linux32v2.c: Regenerate.
* features/s390-linux64.c: Regenerate.
* features/s390-linux64v1.c: Regenerate.
* features/s390-linux64v2.c: Regenerate.
* features/s390-te-linux64.c: Regenerate.
* features/s390-tevx-linux64.c: Regenerate.
* features/s390-vx-linux64.c: Regenerate.
* features/s390x-gs-linux64.c: Regenerate.
* features/s390x-linux64.c: Regenerate.
* features/s390x-linux64v1.c: Regenerate.
* features/s390x-linux64v2.c: Regenerate.
* features/s390x-te-linux64.c: Regenerate.
* features/s390x-tevx-linux64.c: Regenerate.
* features/s390x-vx-linux64.c: Regenerate.
* mips-tdep.c (_initialize_mips_tdep): Release unique_ptr returned
from allocate_target_description.
* target-descriptions.c (allocate_target_description): Update
return type.
(print_c_tdesc::visit_pre): Release unique_ptr returned from
allocate_target_description.
gdbserver/ChangeLog:
* linux-low.cc (linux_process_target::handle_extended_wait):
Release the unique_ptr returned from allocate_target_description.
* linux-riscv-low.cc (riscv_target::low_arch_setup): Likewise.
* linux-x86-low.cc (tdesc_amd64_linux_no_xml): Change type.
(tdesc_i386_linux_no_xml): Change type.
(x86_linux_read_description): Borrow pointer from unique_ptr
object.
(x86_target::get_ipa_tdesc_idx): Likewise.
(initialize_low_arch): Likewise.
* tdesc.cc (allocate_target_description): Update return type.
gdbsupport/ChangeLog:
* tdesc.h (allocate_target_description): Update return type.
|
|
Assign names to event loop file handlers. They will be used in debug
messages when file handlers are invoked.
In GDB, each UI used to get its own unique number, until commit
cbe256847e19 ("Remove ui::num"). Re-introduce this field, and use it to
make a unique name for the handler.
I'm not too sure what goes on in ser-base.c, all I know is that it's
what is used when debugging remotely. I've just named the main handler
"serial". It would be good to have unique names there too. For instance
when debugging with two different remote connections, we'd ideally want
the handlers to have unique names. I didn't do it in this patch though.
gdb/ChangeLog:
* async-event.c (initialize_async_signal_handlers): Pass name to
add_file_handler
* event-top.c (ui_register_input_event_handler): Likewise.
* linux-nat.c (linux_nat_target::async): Likewise.
* run-on-main-thread.c (_initialize_run_on_main_thread):
Likewise
* ser-base.c (reschedule): Likewise.
(ser_base_async): Likewise.
* tui/tui-io.c: Likewise.
* top.h (struct ui) <num>: New field.
* top.c (highest_ui_num): New variable.
(ui::ui): Initialize num.
gdbserver/ChangeLog:
* linux-low.cc (linux_process_target::async): Pass name to
add_file_handler.
* remote-utils.cc (handle_accept_event): Likewise.
(remote_open): Likewise.
gdbsupport/ChangeLog:
* event-loop.h (add_file_handler): Add "name" parameter.
* event-loop.cc (struct file_handler) <name>: New field.
(create_file_handler): Add "name" parameter, assign it to file
handler.
(add_file_handler): Add "name" parameter.
Change-Id: I9f1545f73888ebb6778eb653a618ca44d105f92c
|
|
This changes TARGET_WNOHANG to be a member of an enum, rather than a
define, and also adds a DEF_ENUM_FLAGS_TYPE for this type. Then, it
changes target_wait and the various target wait methods to use this
type rather than "int".
This didn't catch any bugs, but it seems like a decent cleanup
nevertheless.
I did not change deprecated_target_wait_hook, since that's only used
out-of-tree (by Insight), and there didn't seem to be a need.
I can't build some of these targets, so I modified them on a
best-effort basis. I don't think this patch should go in before the
release branch is made.
gdb/ChangeLog
2020-09-18 Tom Tromey <tromey@adacore.com>
* windows-nat.c (struct windows_nat_target) <wait>: Update.
(windows_nat_target::wait): Update.
* target/wait.h (enum target_wait_flag): New. Use
DEF_ENUM_FLAGS_TYPE.
* target/target.h (target_wait): Change type of options.
* target.h (target_options_to_string, default_target_wait):
Update.
(struct target_ops) <wait>: Change type of options.
* target.c (target_wait, default_target_wait, do_option): Change
type of "options".
(target_options_to_string): Likewise.
* target-delegates.c: Rebuild.
* target-debug.h (target_debug_print_target_wait_flags): Rename
from target_debug_print_options.
* sol-thread.c (class sol_thread_target) <wait>: Update.
(sol_thread_target::wait): Update.
* rs6000-nat.c (class rs6000_nat_target) <wait>: Update.
(rs6000_nat_target::wait): Update.
* remote.c (class remote_target) <wait, wait_ns, wait_as>:
Update.
(remote_target::wait_ns, remote_target::wait_as): Change type of
"options".
(remote_target::wait): Update.
* remote-sim.c (struct gdbsim_target) <wait>: Update.
(gdbsim_target::wait): Update.
* record-full.c (class record_full_base_target) <wait>: Update.
(record_full_wait_1): Change type of "options".
(record_full_base_target::wait): Update.
* record-btrace.c (class record_btrace_target) <wait>: Update.
(record_btrace_target::wait): Update.
* ravenscar-thread.c (struct ravenscar_thread_target) <wait>:
Update.
(ravenscar_thread_target::wait): Update.
* procfs.c (class procfs_target) <wait>: Update.
(procfs_target::wait): Update.
* obsd-nat.h (class obsd_nat_target) <wait>: Update.
* obsd-nat.c (obsd_nat_target::wait): Update.
* nto-procfs.c (struct nto_procfs_target) <wait>: Update.
(nto_procfs_target::wait): Update.
* nbsd-nat.h (struct nbsd_nat_target) <wait>: Update.
* nbsd-nat.c (nbsd_wait): Change type of "options".
(nbsd_nat_target::wait): Update.
* linux-thread-db.c (class thread_db_target) <wait>: Update.
(thread_db_target::wait): Update.
* linux-nat.h (class linux_nat_target) <wait>: Update.
* linux-nat.c (linux_nat_target::wait): Update.
(linux_nat_wait_1): Update.
* infrun.c (do_target_wait_1, do_target_wait): Change type of
"options".
* inf-ptrace.h (struct inf_ptrace_target) <wait>: Update.
* inf-ptrace.c (inf_ptrace_target::wait): Update.
* go32-nat.c (struct go32_nat_target) <wait>: Update.
(go32_nat_target::wait): Update.
* gnu-nat.h (struct gnu_nat_target) <wait>: Update.
* gnu-nat.c (gnu_nat_target::wait): Update.
* fbsd-nat.h (class fbsd_nat_target) <wait>: Update.
* fbsd-nat.c (fbsd_nat_target::wait): Update.
* darwin-nat.h (class darwin_nat_target) <wait>: Update.
* darwin-nat.c (darwin_nat_target::wait): Update.
* bsd-uthread.c (struct bsd_uthread_target) <wait>: Update.
(bsd_uthread_target::wait): Update.
* aix-thread.c (class aix_thread_target) <wait>: Update.
(aix_thread_target::wait): Update.
gdbserver/ChangeLog
2020-09-18 Tom Tromey <tromey@adacore.com>
* netbsd-low.h (class netbsd_process_target) <wait>: Update.
* netbsd-low.cc (netbsd_waitpid, netbsd_wait)
(netbsd_process_target::wait): Change type of target_options.
* win32-low.h (class win32_process_target) <wait>: Update.
* win32-low.cc (win32_process_target::wait): Update.
* target.h (class process_stratum_target) <wait>: Update.
(mywait): Update.
* target.cc (mywait, target_wait): Change type of "options".
* linux-low.h (class linux_process_target) <wait, wait_1>:
Update.
* linux-low.cc (linux_process_target::wait)
(linux_process_target::wait_1): Update.
|
|
I noticed that my IDE was confusing the two stopped_pids variables.
There is one in GDB and one in GDBserver. They should be static, make
them so.
gdb/ChangeLog:
* linux-nat.c (stopped_pids): Make static.
gdbserver/ChangeLog:
* linux-low.cc (stopped_pids): Make static.
Change-Id: If4a2bdcd45d32eb3a732d266a0f686a4e4c23672
|
|
Use std::list to store pending signals instead of a manually-managed
linked list. This is a refactoring.
In the existing code, pending signals are kept in a manually-created
linked list with "prev" pointers. A new pending signal is thus
inserted to the beginning of the list. When consuming, GDB goes until
the end of the list, following the "prev" pointers, and processes the
final item. With this patch, a new item is added to the end of the
list and the item at the front of the list is consumed. In other
words, the list elements used to be stored in reverse order; with this
patch, they are stored in their order of arrival. This causes a change
in the debug messages that print the pending signals. Otherwise, no
behavioral change is expected.
gdbserver/ChangeLog:
2020-06-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Use std::list to stop pending signal instead of manually-created
linked list.
* linux-low.h: Include <list>.
(struct pending_signal): Move here from linux-low.cc.
(struct lwp_info) <pending_signals>
<pending_signals_to_report>: Update the type.
* linux-low.cc (struct pending_signals): Remove.
(linux_process_target::delete_lwp)
(linux_process_target::add_lwp)
(enqueue_one_deferred_signal)
(dequeue_one_deferred_signal)
(enqueue_pending_signal)
(linux_process_target::resume_one_lwp_throw)
(linux_process_target::thread_needs_step_over)
(linux_process_target::resume_one_thread)
(linux_process_target::proceed_one_lwp): Update the use of pending
signal list.
|
|
This port has been unmaintained for years and the upstream Linux kernel
does not support this architecture anymore, remove it.
gdbserver/ChangeLog:
* Makefile.in (SFILES): Remove linux-bfin-low.c.
* configure.srv: Remove bfin case.
* linux-bfin-low.cc: Remove.
* linux-low.cc: Remove BFIN-conditional code.
Change-Id: I846310d15e6386118ec7eabb1b87e647174560fb
|
|
Use the construct_inferior_arguments function instead of
stringify_argv to construct a string from the program
arguments in those places where that one is then passed
to fork_inferior (linux-low, lyn-low), since
construct_inferior_arguments properly takes care of
special characters, while stringify_argv does not.
Using construct_inferior_arguments seems "natural", since its
documentation also mentions that it "does the
same shell processing as fork_inferior".
Since construct_inferior_args has been extended to do
proper quoting for Windows shells in commit
5d60742e2dd3c9b475dce54b56043a358751bbb8
("Fix quoting of special characters for the MinGW build.",
2012-06-12), use it for the Windows case as well.
(I could not test that case myself, though.)
Adapt handling of empty args in function 'handle_v_run'
in gdbserver/server.cc to just insert an empty string
for an empty arg, since that one is now properly handled
in 'construct_inferior_arguments' already (and inserting
a "''" string in 'handle_v_run' would otherwise
cause that one to be treated as a string literally
containing two quote characters, which
'construct_inferior_args' would preserve by adding
extra escaping).
This makes gdbserver properly handle program args containing special
characters (like spaces), e.g. (example from PR25893)
$ gdbserver localhost:50505 myprogram "hello world"
now properly handles "hello world" as a single arg, not two separate
ones ("hello", "world").
gdbserver/ChangeLog:
PR gdbserver/25893
* linux-low.cc (linux_process_target::create_inferior),
lynx-low.cc (lynx_process_target::create_inferior),
win32-low.cc (win32_process_target::create_inferior): Use
construct_inferior_arguments instead of stringify_argv
to get string representation which properly escapes
special characters.
* server.cc (handle_v_run): Just pass empty program arg
as such, since any further processing is now handled via
construct_inferior_arguments.
Change-Id: Ibf963fcd51415c948840fb463289516b3479b0c3
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'get_ipa_tdesc_idx' linux target op and let a concrete
linux target define the op by overriding the declaration in
process_stratum_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <get_ipa_tdesc_idx>: Remove.
* linux-low.cc (linux_process_target::get_ipa_tdesc_idx): Remove.
* linux-x86-low.cc (class x86_target) <get_ipa_tdesc_idx>: Declare.
(x86_get_ipa_tdesc_idx): Turn into...
(x86_target::get_ipa_tdesc_idx): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <get_ipa_tdesc_idx>: Declare.
(ppc_get_ipa_tdesc_idx): Turn into...
(ppc_target::get_ipa_tdesc_idx): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <get_ipa_tdesc_idx>: Declare.
(s390_get_ipa_tdesc_idx): Turn into...
(s390_target::get_ipa_tdesc_idx): ...this.
(the_low_target): Remove the op field.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'get_syscall_trapinfo' linux target op into a method
of process_stratum_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <get_syscall_trapinfo>
<gdb_catch_this_syscall>
<low_supports_catch_syscall>
<low_get_syscall_trapinfo>: Declare.
* linux-low.cc (get_syscall_trapinfo): Turn into...
(linux_process_target::get_syscall_trapinfo): ...this.
(linux_process_target::low_get_syscall_trapinfo): Define.
(gdb_catch_this_syscall_p): Turn into...
(linux_process_target::gdb_catch_this_syscall): ...this.
(linux_process_target::low_supports_catch_syscall): Define.
Update the callers below.
(linux_process_target::wait_1)
(linux_process_target::supports_catch_syscall)
* linux-x86-low.cc (class x86_target) <low_supports_catch_syscall>
<low_get_syscall_trapinfo>: Declare.
(x86_target::low_supports_catch_syscall): Define.
(x86_get_syscall_trapinfo): Turn into...
(x86_target::low_get_syscall_trapinfo): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target)
<low_supports_catch_syscall>
<low_get_syscall_trapinfo>: Declare.
(aarch64_target::low_supports_catch_syscall): Define.
(aarch64_get_syscall_trapinfo): Turn into...
(aarch64_target::low_get_syscall_trapinfo): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target) <low_supports_catch_syscall>
<low_get_syscall_trapinfo>: Declare.
(arm_target::low_supports_catch_syscall): Define.
(arm_get_syscall_trapinfo): Turn into...
(arm_target::low_get_syscall_trapinfo): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (the_low_target): Remove the op field.
* linux-s390-low.cc (the_low_target): Remove the op field.
|
|
All the linux low targets except arm define the
'supports_hardware_single_step' op to return true. Hence, we override
the method to return true in linux_process_target, and remove the
definitions in all the linux low targets but arm.
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'supports_hardware_single_step' linux target op and
override the process_stratum_target's op definition in
linux_process_target to return true.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <finish_step_over>
<maybe_hw_step>: Declare.
* linux-low.cc (can_hardware_single_step): Remove.
(maybe_hw_step): Turn into...
(linux_process_target::maybe_hw_step): ...this.
(finish_step_over): Turn into...
(linux_process_target::finish_step_over): ...this.
(linux_process_target::supports_hardware_single_step): Update
to return true.
Update the callers below.
(linux_process_target::single_step)
(linux_process_target::resume_one_lwp_throw)
* linux-arm-low.cc (class arm_target)
<supports_hardware_single_step>: Declare.
(arm_supports_hardware_single_step): Turn into...
(arm_target::supports_hardware_single_step): ...this.
(the_low_target): Remove the op field.
* linux-x86-low.cc (x86_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (aarch64_supports_hardware_single_step):
Remove.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (bfin_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-crisv32-low.cc (cris_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-m32r-low.cc (m32r_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-m68k-low.cc (m68k_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (ppc_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-s390-low.cc (s390_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-sh-low.cc (sh_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-tic6x-low.cc (tic6x_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-tile-low.cc (tile_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-xtensa-low.cc (xtensa_supports_hardware_single_step):
Remove.
(the_low_target): Remove the op field.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'supports_range_stepping' linux target op into a method
of linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <low_supports_range_stepping>: Declare.
* linux-low.cc (linux_process_target::low_supports_range_stepping):
Define.
(linux_process_target::supports_range_stepping): Update the call
site.
* linux-x86-low.cc (class x86_target)
<low_supports_range_stepping>: Declare.
(x86_supports_range_stepping): Turn into...
(x86_target::low_supports_range_stepping): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target)
<low_supports_range_stepping>: Declare.
(aarch64_supports_range_stepping): Turn into...
(aarch64_target::low_supports_range_stepping): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (the_low_target): Remove the op field.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'emit_ops' linux target ops and let the concrete
linux target define the op by overriding the declaration of
process_stratum_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <emit_ops>: Remove.
* linux-low.cc (linux_process_target::emit_ops): Remove.
* linux-x86-low.cc (class x86_target) <emit_ops>: Declare.
(x86_emit_ops): Turn into...
(x86_target::emit_ops): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target) <emit_ops>: Declare.
(aarch64_emit_ops): Turn into...
(aarch64_target::emit_ops): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <emit_ops>: Declare.
(ppc_emit_ops): Turn into...
(ppc_target::emit_ops): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <emit_ops>: Declare.
(s390_emit_ops): Turn into...
(s390_target::emit_ops): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (the_low_target): Remove the op field.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'install_fast_tracepoint_jump_pad' and
'get_min_fast_tracepoint_insn_len' linux target ops to let the
concrete linux target define the ops by overriding the declarations
of process_stratum_target.
* linux-low.h (struct linux_target_ops): Remove the ops.
(class linux_process_target) <supports_fast_tracepoints>
<install_fast_tracepoint_jump_pad>
<get_min_fast_tracepoint_insn_len>: Remove.
* linux-low.cc (linux_process_target::supports_fast_tracepoints)
(linux_process_target::install_fast_tracepoint_jump_pad)
(linux_process_target::get_min_fast_tracepoint_insn_len): Remove.
* linux-x86-low.cc (class x86_target) <supports_fast_tracepoints>
<install_fast_tracepoint_jump_pad>
<get_min_fast_tracepoint_insn_len>: Declare.
(x86_target::supports_fast_tracepoints): Define.
(x86_install_fast_tracepoint_jump_pad): Turn into...
(x86_target::install_fast_tracepoint_jump_pad): ...this.
(x86_get_min_fast_tracepoint_insn_len): Turn into...
(x86_target::get_min_fast_tracepoint_insn_len): ...this.
(the_low_target): Remove the op fields.
* linux-aarch64-low.cc (class aarch64_target)
<supports_fast_tracepoints>
<install_fast_tracepoint_jump_pad>
<get_min_fast_tracepoint_insn_len>: Declare.
(aarch64_target::supports_fast_tracepoints): Define.
(aarch64_install_fast_tracepoint_jump_pad): Turn into...
(aarch64_target::install_fast_tracepoint_jump_pad): ...this.
(aarch64_get_min_fast_tracepoint_insn_len): Turn into...
(aarch64_target::get_min_fast_tracepoint_insn_len): ...this.
(the_low_target): Remove the op fields.
* linux-ppc-low.cc (class ppc_target) <supports_fast_tracepoints>
<install_fast_tracepoint_jump_pad>
<get_min_fast_tracepoint_insn_len>: Declare.
(ppc_target::supports_fast_tracepoints): Define.
(ppc_install_fast_tracepoint_jump_pad): Turn into...
(ppc_target::install_fast_tracepoint_jump_pad): ...this.
(ppc_get_min_fast_tracepoint_insn_len): Turn into...
(ppc_target::get_min_fast_tracepoint_insn_len): ...this.
(the_low_target): Remove the op fields.
* linux-s390-low.cc (class s390_target) <supports_fast_tracepoints>
<install_fast_tracepoint_jump_pad>
<get_min_fast_tracepoint_insn_len>: Declare.
(s390_target::supports_fast_tracepoints): Define.
(s390_install_fast_tracepoint_jump_pad): Turn into...
(s390_target::install_fast_tracepoint_jump_pad): ...this.
(s390_get_min_fast_tracepoint_insn_len): Turn into...
(s390_target::get_min_fast_tracepoint_insn_len): ...this.
(the_low_target): Remove the op fields.
* linux-arm-low.cc (the_low_target): Remove the op fields.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'get_thread_area' linux target op into a method of
process_stratum_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <stuck_in_jump_pad>
<linux_fast_tracepoint_collecting>
<low_get_thread_area>: Declare.
* linux-low.cc (supports_fast_tracepoints): Remove.
(linux_fast_tracepoint_collecting): Turn into...
(linux_process_target::linux_fast_tracepoint_collecting): ...this.
(linux_process_target::low_get_thread_area): Define.
(stuck_in_jump_pad_callback): Turn into...
(linux_process_target::stuck_in_jump_pad): ...this.
Update the caller below.
(linux_process_target::stabilize_threads)
* linux-x86-low.cc (class x86_target) <low_get_thread_area>:
Declare.
(x86_get_thread_area): Turn into...
(x86_target::low_get_thread_area): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target) <low_get_thread_area>:
Declare.
(aarch64_get_thread_area): Turn into...
(aarch64_target::low_get_thread_area): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <low_get_thread_area>:
Declare.
(ppc_get_thread_area): Turn into...
(ppc_target::low_get_thread_area): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <low_get_thread_area>:
Declare.
(s390_get_thread_area): Turn into...
(s390_target::low_get_thread_area): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (the_low_target): Remove the op field.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remote the 'supports_tracepoints' linux target op and let the
concrete linux target define it by overriding the op declared in
process_stratum_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <supports_tracepoints>: Remove.
* linux-low.cc (linux_process_target::supports_tracepoints): Remove.
* linux-x86-low.cc (class x86_target) <supports_tracepoints>:
Declare.
(x86_supports_tracepoints): Turn into...
(x86_target::supports_tracepoints): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target)
<supports_tracepoints>: Declare.
(aarch64_supports_tracepoints): Turn into...
(aarch64_target::supports_tracepoints): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <supports_tracepoints>:
Declare.
(ppc_supports_tracepoints): Turn into...
(ppc_target::supports_tracepoints): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <supports_tracepoints>:
Declare.
(s390_supports_tracepoints): Turn into...
(s390_target::supports_tracepoints): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (the_low_target): Remove the op field.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'process_qsupported' linux target op and let a concrete
linux target define the op by overriding the op declaration in
process_stratum_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <process_qsupported>: Remove.
* linux-low.cc (linux_process_target::process_qsupported): Remove.
* linux-x86-low.cc (class x86_target) <process_qsupported>: Declare.
(x86_linux_process_qsupported): Turn into...
(x86_target::process_qsupported): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (the_low_target): Remove the op
field.
* linux-arm-low.cc (the_low_target): Ditto.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'prepare_to_resume' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <low_prepare_to_resume>: Declare.
* linux-low.cc (linux_process_target::low_prepare_to_resume):
Define.
Update the callers below:
(linux_process_target::resume_one_lwp_throw)
(linux_process_target::low_prepare_to_resume)
* linux-x86-low.cc (class x86_target) <low_prepare_to_resume>:
Declare.
(x86_target::low_prepare_to_resume): Define.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target)
<low_prepare_to_resume>: Declare.
(aarch64_target::low_prepare_to_resume): Define.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target) <low_prepare_to_resume>:
Declare.
(arm_prepare_to_resume): Turn into...
(arm_target::low_prepare_to_resume): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target) <low_prepare_to_resume>:
Declare.
(mips_linux_prepare_to_resume): Turn into...
(mips_target::low_prepare_to_resume): ...this.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (the_low_target): Remove the op field.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'new_process', 'delete_process', 'new_thread',
'delete_thread', and 'new_fork' linux target ops into methods
of linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the ops.
(class linux_process_target) <add_linux_process>
<add_lwp>
<delete_lwp>
<attach_lwp>
<detach_one_lwp>
<check_zombie_leaders>
<filter_exit_event>
<low_new_process>
<low_delete_process>
<low_new_thread>
<low_delete_thread>
<low_new_fork>: Declare.
* linux-low.cc (delete_lwp): Turn into...
(linux_process_target::delete_lwp): ...this.
(linux_process_target::low_delete_thread): Define.
(linux_add_process): Turn into...
(linux_process_target::add_linux_process): ...this.
(linux_process_target::low_new_process): Define.
(linux_process_target::low_delete_process): Define.
(linux_process_target::low_new_fork): Define.
(add_lwp): Turn into...
(linux_process_target::add_lwp): ...this.
(linux_process_target::low_new_thread): Define.
(linux_attach_lwp): Turn into...
(linux_process_target::attach_lwp): ...this.
(linux_detach_one_lwp): Turn into...
(linux_process_target::detach_one_lwp): ...this.
(linux_detach_lwp_callback): Remove and inline...
(linux_process_target::detach): ...here.
(check_zombie_leaders): Turn into...
(linux_process_target::check_zombie_leaders): ...this.
(filter_exit_event): Turn into...
(linux_process_target::filter_exit_event): ...this.
Update the callers below.
(linux_process_target::handle_extended_wait)
(linux_process_target::create_inferior)
(attach_proc_task_lwp_callback)
(linux_process_target::attach)
(linux_process_target::detach)
(linux_process_target::mourn)
* thread-db.cc (attach_thread)
* linux-x86-low.cc (class x86_target) <low_new_process>
<low_delete_process>
<low_new_thread>
<low_delete_thread>
<low_new_fork>: Declare.
(x86_linux_new_process): Turn into...
(x86_target::low_new_process): ...this.
(x86_linux_delete_process): Turn into...
(x86_target::low_delete_process): ...this.
(x86_target::low_new_thread): Define.
(x86_target::low_delete_thread): Define.
(x86_linux_new_fork): Turn into...
(x86_target::low_new_fork): ...this.
(the_low_target): Remove the op fields.
* linux-aarch64-low.cc (class aarch64_target) <low_new_process>
<low_delete_process>
<low_new_thread>
<low_delete_thread>
<low_new_fork>: Declare.
(aarch64_linux_new_process): Turn into...
(aarch64_target::low_new_process): ...this.
(aarch64_linux_delete_process): Turn into...
(aarch64_target::low_delete_process): ...this.
(aarch64_target::low_new_thread): Define.
(aarch64_target::low_delete_thread): Define.
(aarch64_linux_new_fork): Turn into...
(aarch64_target::low_new_fork): ...this.
(the_low_target): Remove the op fields.
* linux-arm-low.cc (class arm_target) <low_new_process>
<low_delete_process>
<low_new_thread>
<low_delete_thread>
<low_new_fork>: Declare.
(arm_new_process): Turn into...
(arm_target::low_new_process): ...this.
(arm_delete_process): Turn into...
(arm_target::low_delete_process): ...this.
(arm_new_thread): Turn into...
(arm_target::low_new_thread): ...this.
(arm_delete_thread): Turn into...
(arm_target::low_delete_thread): ...this.
(arm_new_fork): Turn into...
(arm_target::low_new_fork): ...this.
(the_low_target): Remove the op fields.
* linux-mips-low.cc (class mips_target) <low_new_process>
<low_delete_process>
<low_new_thread>
<low_delete_thread>
<low_new_fork>: Declare.
(mips_linux_new_process): Turn into...
(mips_target::low_new_process): ...this.
(mips_linux_delete_process): Turn into...
(mips_target::low_delete_process): ...this.
(mips_linux_new_thread): Turn into...
(mips_target::low_new_thread): ...this.
(mips_linux_delete_thread): Turn into...
(mips_target::low_delete_thread): ...this.
(mips_linux_new_fork): Turn into...
(mips_target::low_new_fork): ...this.
(the_low_target): Remove the op fields.
* linux-bfin-low.cc (the_low_target): Remove the op fields.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'siginfo_fixup' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <siginfo_fixup>
<low_siginfo_fixup>: Declare.
* linux-low.cc (siginfo_fixup): Turn into...
(linux_process_target::siginfo_fixup): ...this.
(linux_process_target::low_siginfo_fixup): Define.
* linux-x86-low.cc (class x86_target) <low_siginfo_fixup>: Declare.
(x86_siginfo_fixup): Turn into...
(x86_target::low_siginfo_fixup): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target):
<low_siginfo_fixup>: Declare.
(aarch64_linux_siginfo_fixup): Turn into...
(aarch64_target::low_siginfo_fixup): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (the_low_target): Remove the op field.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-mips-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'collect_ptrace_register' and 'supply_ptrace_register'
linux target ops into methods of linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the ops.
(class linux_process_target) <low_collect_ptrace_register>
<low_store_ptrace_register>: Declare.
* linux-low.cc (linux_process_target::low_collect_ptrace_register)
(linux_process_target::low_supply_ptrace_register): Define.
Update the callers below.
(linux_process_target::fetch_register)
(linux_process_target::store_register)
* linux-x86-low.cc (the_low_target): Remove the op fields.
* linux-aarch64-low.cc (the_low_target): Ditto.
* linux-arm-low.cc (the_low_target): Ditto.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-sparc-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
* linux-mips-low.cc (class mips_target)
<low_collect_ptrace_register>
<low_supply_ptrace_register>: Declare.
(mips_collect_ptrace_register): Turn into ...
(mips_target::low_collect_ptrace_register): ...this.
(mips_supply_ptrace_register): Turn into...
(mips_target::low_supply_ptrace_register): ...this.
(the_low_target): Remove the op fields.
* linux-ppc-low.cc (class ppc_target)
<low_collect_ptrace_register>
<low_supply_ptrace_register>: Declare.
(ppc_collect_ptrace_register): Turn into ...
(ppc_target::low_collect_ptrace_register): ...this.
(ppc_supply_ptrace_register): Turn into ...
(ppc_target::low_supply_ptrace_register): ...this.
(ppc_fill_gregset): Update for the calls to
low_collect_ptrace_register.
(the_low_target): Remove the op fields.
* linux-s390-low.cc (class s390_target)
<low_collect_ptrace_register>
<low_supply_ptrace_register>: Declare.
(s390_collect_ptrace_register): Turn into ...
(s390_target::low_collect_ptrace_register): ...this.
(s390_supply_ptrace_register): Turn into ...
(s390_target::low_supply_ptrace_register): ...this.
(s390_fill_gregset): Update for the calls to
low_collect_ptrace_register.
(the_low_target): Remove the op fields.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'stopped_by_watchpoint' and 'stopped_data_address' linux
target ops into methods of linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the ops.
(class linux_process_target) <check_stopped_by_watchpoint>
<low_stopped_by_watchpoint>
<low_stopped_data_address>: Declare.
* linux-low.cc (check_stopped_by_watchpoint): Turn into...
(linux_process_target::check_stopped_by_watchpoint): ...this.
(linux_process_target::low_stopped_by_watchpoint): Define.
(linux_process_target::low_stopped_data_address): Define.
* linux-x86-low.cc (class x86_target) <low_stopped_by_watchpoint>
<low_stopped_data_address>: Declare.
(x86_stopped_by_watchpoint): Turn into...
(x86_target::low_stopped_by_watchpoint): ...this.
(x86_stopped_data_address): Turn into...
(x86_target::low_stopped_data_address): ...this.
(the_low_target): Remove the op fields.
* linux-aarch64-low.cc (class aarch64_target)
<low_stopped_by_watchpoint>
<low_stopped_data_address>: Declare.
(aarch64_stopped_by_watchpoint): Turn into...
(aarch64_target::low_stopped_by_watchpoint): ...this.
(aarch64_stopped_data_address): Turn into...
(aarch64_target::low_stopped_data_address): ...this.
(the_low_target): Remove the op fields.
* linux-arm-low.cc (class arm_target) <low_stopped_by_watchpoint>
<low_stopped_data_address>: Declare.
(arm_stopped_by_watchpoint): Turn into...
(arm_target::low_stopped_by_watchpoint): ...this.
(arm_stopped_data_address): Turn into...
(arm_target::low_stopped_data_address): ...this.
(the_low_target): Remove the op fields.
* linux-crisv32-low.cc (class crisv32_target)
<low_stopped_by_watchpoint>
<low_stopped_data_address>: Declare.
(cris_stopped_by_watchpoint): Turn into...
(crisv32_target::low_stopped_by_watchpoint): ...this.
(cris_stopped_data_address): Turn into...
(crisv32_target::low_stopped_data_address): ...this.
(the_low_target): Remove the op fields.
* linux-mips-low.cc (class mips_target) <low_stopped_by_watchpoint>
<low_stopped_data_address>: Declare.
(mips_stopped_by_watchpoint): Turn into...
(mips_target::low_stopped_by_watchpoint): ...this.
(mips_stopped_data_address): Turn into...
(mips_target::low_stopped_data_address): ...this.
(the_low_target): Remove the op fields.
* linux-bfin-low.cc (the_low_target): Remove the op fields.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-sparc-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'insert_point' and 'remove_point' linux target ops into
methods of linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the ops.
(class linux_process_target) <low_insert_point>
<low_remove_point>: Declare.
* linux-low.cc (linux_process_target::low_insert_point)
(linux_process_target::low_remove_point): Define.
(linux_process_target::insert_point)
(linux_process_target::remove_point): Update for calls to
low_insert_point and low_remove_point.
* linux-x86-low.cc (class x86_target) <low_insert_point>
<low_remove_point>: Declare.
(x86_insert_point): Turn into...
(x86_target::low_insert_point): ...this.
(x86_remove_point): Turn into...
(x86_target::low_remove_point): ...this.
(the_low_target): Remove the op fields.
* linux-aarch64-low.cc (class aarch64_target) <low_insert_point>
<low_remove_point>: Declare.
(aarch64_insert_point): Turn into...
(aarch64_target::low_insert_point): ...this.
(aarch64_remove_point): Turn into...
(aarch64_target::low_remove_point): ...this.
(the_low_target): Remove the op fields.
* linux-arm-low.cc (class arm_target) <low_insert_point>
<low_remove_point>: Declare.
(arm_insert_point): Turn into...
(arm_target::low_insert_point): ...this.
(arm_remove_point): Turn into...
(arm_target::low_remove_point): ...this.
(the_low_target): Remove the op fields.
* linux-crisv32-low.cc (class crisv32_target) <low_insert_point>
<low_remove_point>: Declare.
(crisv32_insert_point): Turn into...
(crisv32_target::low_insert_point): ...this.
(crisv32_remove_point): Turn into...
(crisv32_target::low_remove_point): ...this.
(the_low_target): Remove the op fields.
* linux-mips-low.cc (class mips_target) <low_insert_point>
<low_remove_point>: Declare.
(mips_insert_point): Turn into...
(mips_target::low_insert_point): ...this.
(mips_remove_point): Turn into...
(mips_target::low_remove_point): ...this.
(the_low_target): Remove the op fields.
* linux-ppc-low.cc (class ppc_target) <low_insert_point>
<low_remove_point>: Declare.
(ppc_insert_point): Turn into...
(ppc_target::low_insert_point): ...this.
(ppc_remove_point): Turn into...
(ppc_target::low_remove_point): ...this.
(the_low_target): Remove the op fields.
* linux-bfin-low.cc (the_low_target): Remove the op fields.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-sparc-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'supports_z_point_type' linux target op and let the
concrete linux target define it by overriding the op declared in
process_stratum_target.
* linux-low.cc (linux_process_target::supports_z_point_type):
Remove.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <supports_z_point_type>: Remove.
* linux-x86-low.cc (class x86_target) <supports_z_point_type>:
Declare.
(x86_supports_z_point_type): Turn into...
(x86_target::supports_z_point_type): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target)
<supports_z_point_type>: Declare.
(aarch64_supports_z_point_type): Turn into...
(aarch64_target::supports_z_point_type): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target) <supports_z_point_type>:
Declare.
(arm_supports_z_point_type): Turn into...
(arm_target::supports_z_point_type): ...this.
(the_low_target): Remove the op field.
* linux-crisv32-low.cc (class crisv32_target)
<supports_z_point_type>: Declare.
(cris_supports_z_point_type): Turn into...
(crisv32_target::supports_z_point_type): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target) <supports_z_point_type>:
Declare.
(mips_supports_z_point_type): Turn into...
(mips_target::supports_z_point_type): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <supports_z_point_type>:
Declare.
(ppc_supports_z_point_type): Turn into...
(ppc_target::supports_z_point_type): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <supports_z_point_type>:
Declare.
(s390_supports_z_point_type): Turn into...
(s390_target::supports_z_point_type): ...this.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (the_low_target): Remove the op field.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-sparc-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'breakpoint_at' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <low_breakpoint_at>: Declare.
Update the callers below:
* linux-low.cc (linux_process_target::save_stop_reason)
(linux_process_target::thread_still_has_status_pending)
(linux_process_target::wait_1)
* linux-x86-low.cc (class x86_target)
<low_breakpoint_at>: Declare.
(x86_breakpoint_at): Turn into...
(x86_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target)
<low_breakpoint_at>: Declare.
(aarch64_breakpoint_at): Turn into...
(aarch64_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target)
<low_breakpoint_at>: Declare.
(arm_target::low_breakpoint_at): Define.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (class bfin_target)
<low_breakpoint_at>: Declare.
(bfin_breakpoint_at): Turn into...
(bfin_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-cris-low.cc (class cris_target)
<low_breakpoint_at>: Declare.
(cris_breakpoint_at): Turn into...
(cris_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-crisv32-low.cc (class crisv32_target)
<low_breakpoint_at>: Declare.
(crisv32_breakpoint_at): Turn into...
(crisv32_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-ia64-low.cc (class ia64_target)
<low_breakpoint_at>: Declare.
(ia64_target::low_breakpoint_at): Define.
* linux-m32r-low.cc (class m32r_target)
<low_breakpoint_at>: Declare.
(m32r_breakpoint_at): Turn into...
(m32r_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-m68k-low.cc (class m68k_target)
<low_breakpoint_at>: Declare.
(m68k_breakpoint_at): Turn into...
(m68k_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target)
<low_breakpoint_at>: Declare.
(mips_breakpoint_at): Turn into...
(mips_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-nios2-low.cc (class nios2_target)
<low_breakpoint_at>: Declare.
(nios2_breakpoint_at): Turn into...
(nios2_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target)
<low_breakpoint_at>: Declare.
(ppc_breakpoint_at): Turn into...
(ppc_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-riscv-low.cc (class riscv_target)
<low_breakpoint_at>: Declare.
(riscv_breakpoint_at): Turn into...
(riscv_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target)
<low_breakpoint_at>: Declare.
(s390_breakpoint_at): Turn into...
(s390_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-sh-low.cc (class sh_target)
<low_breakpoint_at>: Declare.
(sh_breakpoint_at): Turn into...
(sh_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-sparc-low.cc (class sparc_target)
<low_breakpoint_at>: Declare.
(sparc_breakpoint_at): Turn into...
(sparc_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-tic6x-low.cc (class tic6x_target)
<low_breakpoint_at>: Declare.
(tic6x_breakpoint_at): Turn into...
(tic6x_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-tile-low.cc (class tile_target)
<low_breakpoint_at>: Declare.
(tile_breakpoint_at): Turn into...
(tile_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-xtensa-low.cc (class xtensa_target)
<low_breakpoint_at>: Declare.
(xtensa_breakpoint_at): Turn into...
(xtensa_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'decr_pc_after_break' linux_target_ops field into
a method of linux_process_target.
* linux-low.h (struct linux_target_ops)
<decr_pc_after_break>: Remove.
(class linux_process_target) <low_decr_pc_after_break>: New method
declaration.
* linux-low.cc (linux_process_target::low_decr_pc_after_break):
New method implementation.
Update the users below.
(linux_process_target::save_stop_reason)
(linux_process_target::wait_1)
* linux-x86-low.cc (class x86_target) <low_decr_pc_after_break>:
New declaration.
(x86_target::low_decr_pc_after_break): New method implementation.
(the_low_target): Remove the field.
* linux-bfin-low.cc (class bfin_target) <low_decr_pc_after_break>:
New declaration.
(bfin_target::low_decr_pc_after_break): New method implementation.
(the_low_target): Remove the field.
* linux-m68k-low.cc (class m68k_target) <low_decr_pc_after_break>:
New declaration.
(m68k_target::low_decr_pc_after_break): New method implementation.
(the_low_target): Remove the field.
* linux-s390-low.cc (class s390_target) <low_decr_pc_after_break>:
New declaration.
(s390_target::low_decr_pc_after_break): New method implementation.
(the_low_target): Remove the field.
* linux-aarch64-low.cc (the_low_target): Remove the field.
* linux-arm-low.cc (the_low_target): Remove the field.
* linux-cris-low.cc (the_low_target): Remove the field.
* linux-crisv32-low.cc (the_low_target): Remove the field.
* linux-m32r-low.cc (the_low_target): Remove the field.
* linux-mips-low.cc (the_low_target): Remove the field.
* linux-nios2-low.cc (the_low_target): Remove the field.
* linux-ppc-low.cc (the_low_target): Remove the field.
* linux-riscv-low.cc (the_low_target): Remove the field.
* linux-sh-low.cc (the_low_target): Remove the field.
* linux-sparc-low.cc (the_low_target): Remove the field.
* linux-tic6x-low.cc (the_low_target): Remove the field.
* linux-tile-low.cc (the_low_target): Remove the field.
* linux-xtensa-low.cc (the_low_target): Remove the field.
|
|
into methods
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'supports_software_single_step' linux target op and let
the concrete linux target define it by overriding the op in
process_stratum_target.
Turn the 'get_next_pcs' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the ops.
(class linux_process_target) <supports_software_single_step>:
Remove.
<low_get_next_pcs>: Declare.
* linux-low.cc (can_software_single_step): Remove.
(linux_process_target::low_get_next_pcs): Define.
(linux_process_target::supports_software_single_step): Remove.
Update the callers below.
(linux_process_target::handle_extended_wait)
(linux_process_target::wait_1)
(linux_process_target::install_software_single_step_breakpoints)
(linux_process_target::single_step)
(linux_process_target::thread_needs_step_over)
(linux_process_target::proceed_one_lwp)
(linux_process_target::supports_range_stepping)
* linux-x86-low.cc (the_low_target): Remove the op field.
* linux-aarch64-low.cc (the_low_target): Ditto.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-cris-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-mips-low.cc (the_low_target): Ditto.
* linux-nios2-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-riscv-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-sparc-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
* linux-arm-low.cc (class arm_target) <low_get_next_pcs>
<supports_software_single_step>: Declare.
(arm_target::supports_software_single_step): Define.
(arm_gdbserver_get_next_pcs): Turn into...
(arm_target::low_get_next_pcs): ...this.
(the_low_target): Remove the op field.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'sw_breakpoint_from_kind' linux target op, and let
the concrete linux target define it by overriding the op
in process_stratum_target.
* linux-low.cc (linux_process_target::sw_breakpoint_from_kind):
Remove.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <sw_breakpoint_from_kind>: Remove.
* linux-x86-low.cc (class x86_target) <sw_breakpoint_from_kind>:
Declare.
(x86_sw_breakpoint_from_kind): Turn into...
(x86_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target)
<sw_breakpoint_from_kind>: Declare.
(aarch64_sw_breakpoint_from_kind): Turn into...
(aarch64_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target) <sw_breakpoint_from_kind>:
Declare.
(arm_target::sw_breakpoint_from_kind): Define.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (class bfin_target) <sw_breakpoint_from_kind>:
Declare.
(bfin_sw_breakpoint_from_kind): Turn into...
(bfin_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-cris-low.cc (class cris_target) <sw_breakpoint_from_kind>:
Declare.
(cris_sw_breakpoint_from_kind): Turn into...
(cris_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-crisv32-low.cc (class crisv32_target)
<sw_breakpoint_from_kind>: Declare.
(cris_sw_breakpoint_from_kind): Turn into...
(crisv32_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-ia64-low.cc (class ia64_target) <sw_breakpoint_from_kind>:
Declare.
(ia64_target::sw_breakpoint_from_kind): Define.
* linux-m32r-low.cc (class m32r_target) <sw_breakpoint_from_kind>:
Declare.
(m32r_sw_breakpoint_from_kind): Turn into...
(m32r_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-m68k-low.cc (class m68k_target) <sw_breakpoint_from_kind>:
Declare.
(m68k_sw_breakpoint_from_kind): Turn into...
(m68k_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target) <sw_breakpoint_from_kind>:
Declare.
(mips_sw_breakpoint_from_kind): Turn into...
(mips_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-nios2-low.cc (class nios2_target) <sw_breakpoint_from_kind>:
Declare.
(nios2_sw_breakpoint_from_kind): Turn into...
(nios2_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <sw_breakpoint_from_kind>:
Declare.
(ppc_sw_breakpoint_from_kind): Turn into...
(ppc_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-riscv-low.cc (class riscv_target) <sw_breakpoint_from_kind>:
Declare.
(riscv_sw_breakpoint_from_kind): Turn into...
(riscv_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <sw_breakpoint_from_kind>:
Declare.
(s390_sw_breakpoint_from_kind): Turn into...
(s390_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-sh-low.cc (class sh_target) <sw_breakpoint_from_kind>:
Declare.
(sh_sw_breakpoint_from_kind): Turn into...
(sh_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-sparc-low.cc (class sparc_target) <sw_breakpoint_from_kind>:
Declare.
(sparc_sw_breakpoint_from_kind): Turn into...
(sparc_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-tic6x-low.cc (class tic6x_target) <sw_breakpoint_from_kind>:
Declare.
(tic6x_sw_breakpoint_from_kind): Turn into...
(tic6x_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-tile-low.cc (class tile_target) <sw_breakpoint_from_kind>:
Declare.
(tile_sw_breakpoint_from_kind): Turn into...
(tile_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-xtensa-low.cc (class xtensa_target)
<sw_breakpoint_from_kind>: Declare.
(xtensa_sw_breakpoint_from_kind): Turn into...
(xtensa_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
|
|
methods
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'breakpoint_kind_from_pc' and
'breakpoint_kind_from_current_state' linux target ops, and let the
concrete linux target define them by overriding the ops of
process_stratum_target.
* linux-low.cc (linux_process_target::breakpoint_kind_from_pc):
Remove.
(linux_process_target::breakpoint_kind_from_current_state): Remove.
* linux-low.h (struct linux_target_ops): Remove ops.
(class linux_process_target) <breakpoint_kind_from_pc>: Remove.
<breakpoint_kind_from_current_state>: Remove.
* linux-x86-low.cc (the_low_target): Remove the op fields.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-cris-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-mips-low.cc (the_low_target): Ditto.
* linux-nios2-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-sparc-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
* linux-aarch64-low.cc (class aarch64_target)
<breakpoint_kind_from_pc>
<breakpoint_kind_from_current_state>: Declare.
(aarch64_breakpoint_kind_from_pc): Turn into...
(aarch64_target::breakpoint_kind_from_pc): ...this.
(aarch64_breakpoint_kind_from_current_state): Turn into...
(aarch64_target::breakpoint_kind_from_current_state): ...this.
(the_low_target): Remove the op fields.
* linux-arm-low.cc (class arm_target):
<breakpoint_kind_from_pc>
<breakpoint_kind_from_current_state>: Declare.
(arm_target::breakpoint_kind_from_pc): Define.
(arm_target::breakpoint_kind_from_current_state): Define.
(the_low_target): Remove the op fields.
* linux-riscv-low.cc (class riscv_target):
<breakpoint_kind_from_pc>: Declare.
(riscv_breakpoint_kind_from_pc): Turn into...
(riscv_target::breakpoint_kind_from_pc): ...this.
(the_low_target): Remove the op fields.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'get_pc' and 'set_pc' linux target ops into methods
of linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the ops.
(class linux_process_target) <low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
* linux-low.cc (supports_breakpoints): Turn into...
(linux_process_target::low_supports_breakpoints): ...this.
(linux_process_target::low_get_pc): Define.
(linux_process_target::low_set_pc): Define.
Update the callers below.
(linux_process_target::get_pc)
(linux_process_target::save_stop_reason)
(linux_process_target::maybe_move_out_of_jump_pad)
(linux_process_target::wait_1)
(linux_process_target::resume_one_lwp_throw)
(linux_process_target::resume)
(linux_process_target::proceed_all_lwps)
(linux_process_target::read_pc)
(linux_process_target::write_pc)
* linux-x86-low.cc (class linux_process_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(x86_target::low_supports_breakpoints): Define.
(x86_get_pc): Turn into...
(x86_target::low_get_pc): ...this.
(x86_set_pc): Turn into...
(x86_target::low_set_pc): ...this.
(the_low_target): Remove the op fields.
* linux-arm-low.cc (class arm_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(arm_target::low_supports_breakpoints)
(arm_target::low_get_pc)
(arm_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-bfin-low.cc (class bfin_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(bfin_target::low_supports_breakpoints)
(bfin_target::low_get_pc)
(bfin_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-cris-low.cc (class cris_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(cris_target::low_supports_breakpoints)
(cris_target::low_get_pc)
(cris_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-crisv32-low.cc (class crisv32_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(crisv32_target::low_supports_breakpoints)
(crisv32_target::low_get_pc)
(crisv32_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-m32r-low.cc (class m32r_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(m32r_target::low_supports_breakpoints)
(m32r_target::low_get_pc)
(m32r_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-m68k-low.cc (class m68k_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(m68k_target::low_supports_breakpoints)
(m68k_target::low_get_pc)
(m68k_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-nios2-low.cc (class nios2_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(nios2_target::low_supports_breakpoints)
(nios2_target::low_get_pc)
(nios2_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-sh-low.cc (class sh_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(sh_target::low_supports_breakpoints)
(sh_target::low_get_pc)
(sh_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-xtensa-low.cc (class xtensa_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(xtensa_target::low_supports_breakpoints)
(xtensa_target::low_get_pc)
(xtensa_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-sparc-low.cc (class sparc_target)
<low_supports_breakpoints>
<low_get_pc>: Declare.
(sparc_target::low_supports_breakpoints)
(sparc_target::low_get_pc): Define.
(the_low_target): Remove the op fields.
* linux-tile-low.cc (class tile_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(tile_target::low_supports_breakpoints)
(tile_target::low_get_pc)
(tile_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-aarch64-low.cc (class aarch64_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(aarch64_target::low_supports_breakpoints): Define.
(aarch64_get_pc): Turn into...
(aarch64_target::low_get_pc): ...this.
(aarch64_set_pc): Turn into...
(aarch64_target::low_set_pc): ...this.
(the_low_target): Remove the op fields.
* linux-mips-low.cc (class mips_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(mips_target::low_supports_breakpoints): Define.
(mips_get_pc): Turn into...
(mips_target::low_get_pc): ...this.
(mips_set_pc): Turn into...
(mips_target::low_set_pc): ...this.
(the_low_target): Remove the op fields.
* linux-ppc-low.cc (class ppc_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(ppc_target::low_supports_breakpoints): Define.
(ppc_get_pc): Turn into...
(ppc_target::low_get_pc): ...this.
(ppc_set_pc): Turn into...
(ppc_target::low_set_pc): ...this.
(the_low_target): Remove the op fields.
* linux-riscv-low.cc (class riscv_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(riscv_target::low_supports_breakpoints): Define.
(riscv_get_pc): Turn into...
(riscv_target::low_get_pc): ...this.
(riscv_set_pc): Turn into...
(riscv_target::low_set_pc): ...this.
(the_low_target): Remove the op fields.
* linux-s390-low.cc (class s390_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(s390_target::low_supports_breakpoints): Define.
(s390_get_pc): Turn into...
(s390_target::low_get_pc): ...this.
(s390_set_pc): Turn into...
(s390_target::low_set_pc): ...this.
(the_low_target): Remove the op fields.
* linux-tic6x-low.cc (class tic6x_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(tic6x_target::low_supports_breakpoints): Define.
(tic6x_get_pc): Turn into...
(tic6x_target::low_get_pc): ...this.
(tic6x_set_pc): Turn into...
(tic6x_target::low_set_pc): ...this.
(the_low_target): Remove the op fields.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn some more static methods in linux-low into private methods
of linux_process_target.
* linux-low.cc (get_pc): Turn into...
(linux_process_target::get_pc): ...this.
(save_stop_reason): Turn into...
(linux_process_target::save_stop_reason): ...this.
(thread_still_has_status_pending_p): Turn into...
(linux_process_target::thread_still_has_status_pending): ...this.
(status_pending_p_callback): Turn into...
(linux_process_target::status_pending_p_callback): ...this.
(resume_stopped_resumed_lwps): Turn into...
(linux_process_target::resume_stopped_resumed_lwps): ...this.
(install_software_single_step_breakpoints): Turn into...
(linux_process_target::install_software_single_step_breakpoints):
...this.
(single_step): Turn into...
(linux_process_target::single_step): ...this.
(linux_resume_one_lwp_throw): Turn into...
(linux_process_target::resume_one_lwp_throw): ...this.
(linux_resume_one_lwp): Turn into...
(linux_process_target::resume_one_lwp): ...this.
(resume_status_pending_p): Turn into...
(linux_process_target::resume_status_pending): ...this.
(need_step_over_p): Turn into...
(linux_process_target::thread_needs_step_over): ...this.
(linux_resume_one_thread): Turn into...
(linux_process_target::resume_one_thread): ...this.
(proceed_one_lwp): Turn into...
(linux_process_target::proceed_one_lwp): ...this.
(unsuspend_and_proceed_one_lwp): Turn into...
(linux_process_target::unsuspend_and_proceed_one_lwp): ...this.
Update the calls/references to the above functions below.
(linux_process_target::handle_extended_wait)
(linux_process_target::filter_event)
(linux_process_target::wait_for_event_filtered)
(linux_process_target::wait_1)
(linux_process_target::move_out_of_jump_pad)
(linux_process_target::start_step_over)
(linux_process_target::resume)
(linux_process_target::proceed_all_lwps)
(regsets_store_inferior_registers)
(linux_process_target::store_register)
* linux-low.h (class linux_process_target)
<get_pc>
<save_stop_reason>
<thread_still_has_status_pending>
<status_pending_p_callback>
<resume_stopped_resumed_lwps>
<install_software_single_step_breakpoints>
<single_step>
<resume_one_lwp_throw>
<resume_one_lwp>
<resume_status_pending>
<thread_needs_step_over>
<resume_one_thread>
<proceed_one_lwp>
<unsuspend_and_proceed_one_lwp>: Declare.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'fetch_register' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops) <fetch_register>: Remove.
(class linux_process_target) <low_fetch_register>: Declare.
* linux-x86-low.cc (the_low_target)
* linux-aarch64-low.cc (the_low_target)
* linux-arm-low.cc (the_low_target)
* linux-bfin-low.cc (the_low_target)
* linux-cris-low.cc (the_low_target)
* linux-crisv32-low.cc (the_low_target)
* linux-m32r-low.cc (the_low_target)
* linux-m68k-low.cc (the_low_target)
* linux-nios2-low.cc (the_low_target)
* linux-ppc-low.cc (the_low_target)
* linux-s390-low.cc (the_low_target)
* linux-sh-low.cc (the_low_target)
* linux-sparc-low.cc (the_low_target)
* linux-tic6x-low.cc (the_low_target)
* linux-tile-low.cc (the_low_target)
* linux-xtensa-low.cc (the_low_target): Remove the op field.
* linux-ia64-low.cc (class ia64_target) <low_fetch_register>:
Declare.
(ia64_fetch_register): Turn into...
(ia64_target::low_fetch_register): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target) <low_fetch_register>:
Declare.
(mips_fetch_register): Turn into...
(mips_target::low_fetch_register): ...this.
(the_low_target): Remove the op field.
* linux-riscv-low.cc (class riscv_target) <low_fetch_register>:
Declare.
(riscv_fetch_register): Turn into...
(riscv_target::low_fetch_register): ...this.
(the_low_target): Remove the op field.
Update the callers below.
* linux-low.cc (linux_process_target::fetch_registers)
(linux_process_target::low_fetch_register)
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'cannot_fetch_register' and 'cannot_store_register'
linux target ops into methods of linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the low target ops.
(class linux_process_target) <fetch_register>
<store_register>
<usr_fetch_inferior_registers>
<usr_store_inferior_registers>
<low_cannot_fetch_register>
<low_cannot_fetch_register> Declare.
* linux-low.cc (fetch_register): Turn into...
(linux_process_target::fetch_register): ...this.
(store_register): Turn into ...
(linux_process_target::store_register): ...this.
(usr_fetch_inferior_registers): Turn into...
(linux_process_target::usr_fetch_inferior_registers): ...this.
(usr_store_inferior_registers): Turn into...
(linux_process_target::usr_store_inferior_registers): ...this.
* linux-x86-low.cc (class x86_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(x86_cannot_store_register): Turn into...
(x86_target::low_cannot_store_register): ...this.
(x86_cannot_fetch_register): Turn into...
(x86_target::low_cannot_fetch_register): ...this.
(the_low_target): Remove the target op fields.
* linux-aarch64-low.cc (class aarch64_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(aarch64_target::low_cannot_fetch_register)
(aarch64_target::low_cannot_store_register): Define.
(the_low_target): Remove the op fields.
* linux-arm-low.cc (class arm_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(arm_cannot_fetch_register): Turn into...
(arm_target::low_cannot_fetch_register): ...this.
(arm_cannot_store_register): Turn into...
(arm_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-bfin-low.cc (class bfin_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(bfin_cannot_fetch_register): Turn into...
(bfin_target::low_cannot_fetch_register): ...this.
(bfin_cannot_store_register): Turn into...
(bfin_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-cris-low.cc (class cris_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(cris_cannot_fetch_register): Turn into...
(cris_target::low_cannot_fetch_register): ...this.
(cris_cannot_store_register): Turn into...
(cris_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-crisv32-low.cc (class crisv32_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(crisv32_target::low_cannot_fetch_register)
(crisv32_target::low_cannot_store_register): Define.
(the_low_target): Remove the op fields.
* linux-ia64-low.cc (class ia64_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(ia64_cannot_fetch_register): Turn into...
(ia64_target::low_cannot_fetch_register): ...this.
(ia64_cannot_store_register): Turn into...
(ia64_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-m32r-low.cc (class m32r_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(m32r_cannot_fetch_register): Turn into...
(m32r_target::low_cannot_fetch_register): ...this.
(m32r_cannot_store_register): Turn into...
(m32r_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-m68k-low.cc (class m68k_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(m68k_cannot_fetch_register): Turn into...
(m68k_target::low_cannot_fetch_register): ...this.
(m68k_cannot_store_register): Turn into...
(m68k_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-mips-low.cc (class mips_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(mips_cannot_fetch_register): Turn into...
(mips_target::low_cannot_fetch_register): ...this.
(mips_cannot_store_register): Turn into...
(mips_target::low_cannot_store_register): ...this.
(get_usrregs_info): Inline at the call sites in
low_cannot_fetch_register and low_cannot_store_register,
and remove.
(the_low_target): Remove the op fields.
* linux-nios2-low.cc (class nios2_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(nios2_cannot_fetch_register): Turn into...
(nios2_target::low_cannot_fetch_register): ...this.
(nios2_cannot_store_register): Turn into...
(nios2_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-ppc-low.cc (class ppc_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(ppc_cannot_fetch_register): Turn into...
(ppc_target::low_cannot_fetch_register): ...this.
(ppc_cannot_store_register): Turn into...
(ppc_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-riscv-low.cc (class riscv_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(riscv_target::low_cannot_fetch_register)
(riscv_target::low_cannot_store_register): Define.
(the_low_target): Remove the op fields.
* linux-s390-low.cc (class s390_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(s390_cannot_fetch_register): Turn into...
(s390_target::low_cannot_fetch_register): ...this.
(s390_cannot_store_register): Turn into...
(s390_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-sh-low.cc (class sh_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(sh_cannot_fetch_register): Turn into...
(sh_target::low_cannot_fetch_register): ...this.
(sh_cannot_store_register): Turn into...
(sh_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-sparc-low.cc (class sparc_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(sparc_cannot_fetch_register): Turn into...
(sparc_target::low_cannot_fetch_register): ...this.
(sparc_cannot_store_register): Turn into...
(sparc_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-tic6x-low.cc (class tic6x_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(tic6x_cannot_fetch_register): Turn into...
(tic6x_target::low_cannot_fetch_register): ...this.
(tic6x_cannot_store_register): Turn into...
(tic6x_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-tile-low.cc (class tile_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(tile_cannot_fetch_register): Turn into...
(tile_target::low_cannot_fetch_register): ...this.
(tile_cannot_store_register): Turn into...
(tile_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-xtensa-low.cc (class xtensa_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(xtensa_target::low_cannot_fetch_register)
(xtensa_target::low_cannot_store_register): Define.
(the_low_target): Remove the op fields.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'regs_info' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops) <regs_info>: Remove.
(class linux_process_target) <get_regs_info>: Define.
Update the callers below.
* linux-low.cc (linux_process_target::fetch_registers)
(linux_process_target::store_registers)
* proc-service.cc (gregset_info)
* linux-x86-low.cc (class x86_target) <get_regs_info>: Declare.
(x86_linux_regs_info): Turn into ...
(x86_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target) <get_regs_info>:
Declare.
(aarch64_regs_info): Turn into ...
(aarch64_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target) <get_regs_info>: Declare.
(arm_regs_info): Turn into ...
(arm_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (class bfin_target) <get_regs_info>: Declare.
(bfin_regs_info): Turn into ...
(bfin_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-cris-low.cc (class cris_target) <get_regs_info>: Declare.
(cris_regs_info): Turn into ...
(cris_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-crisv32-low.cc (class crisv32_target) <get_regs_info>:
Declare.
(crisv32_regs_info): Turn into ...
(crisv32_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-ia64-low.cc (class ia64_target) <get_regs_info>: Declare.
(ia64_regs_info): Turn into ...
(ia64_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-m32r-low.cc (class m32r_target) <get_regs_info>: Declare.
(m32r_regs_info): Turn into ...
(m32r_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-m68k-low.cc (class m68k_target) <get_regs_info>: Declare.
(m68k_regs_info): Turn into ...
(m68k_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target) <get_regs_info>: Declare.
(mips_regs_info): Turn into ...
(mips_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
(get_usrregs_info): Update the call to the op.
* linux-nios2-low.cc (class nios2_target) <get_regs_info>: Declare.
(nios2_regs_info): Turn into ...
(nios2_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <get_regs_info>: Declare.
(ppc_regs_info): Turn into ...
(ppc_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-riscv-low.cc (class riscv_target) <get_regs_info>: Declare.
(riscv_regs_info): Turn into ...
(riscv_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <get_regs_info>: Declare.
(s390_regs_info): Turn into ...
(s390_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
(s390_collect_ptrace_register)
(s390_supply_ptrace_register)
(s390_fill_gregset): Update the call to the op.
* linux-sh-low.cc (class sh_target) <get_regs_info>: Declare.
(sh_regs_info): Turn into ...
(sh_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-sparc-low.cc (class sparc_target) <get_regs_info>: Declare.
(sparc_regs_info): Turn into ...
(sparc_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-tic6x-low.cc (class tic6x_target) <get_regs_info>: Declare.
(tic6x_regs_info): Turn into ...
(tic6x_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-tile-low.cc (class tile_target) <get_regs_info>: Declare.
(tile_regs_info): Turn into ...
(tile_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-xtensa-low.cc (class xtensa_target) <get_regs_info>:
Declare.
(xtensa_regs_info): Turn into ...
(xtensa_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'arch_setup' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops) <arch_setup>: Delete.
(class linux_process_target) <arch_setup_thread>
<low_arch_setup>: New declarations.
* linux-low.cc (linux_arch_setup): Delete.
(linux_arch_setup_thread): Turn into...
(linux_process_target::arch_setup_thread): ... this.
Update the callers below.
(linux_process_target::handle_extended_wait)
(linux_process_target::post_create_inferior)
(linux_process_target::filter_event)
* linux-x86-low.cc (class x86_target) <low_arch_setup>: New
declaration.
(x86_linux_update_xmltarget): Turn into...
(x86_target::update_xmltarget): ...this.
(x86_linux_process_qsupported): Update the call to
x86_linux_update_xmltarget.
(x86_arch_setup): Turn into ...
(x86_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target) <low_arch_setup>: New
declaration.
(aarch64_arch_setup): Turn into ...
(aarch64_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target) <low_arch_setup>: New
declaration.
(arm_arch_setup): Turn into ...
(arm_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (class bfin_target) <low_arch_setup>: New
declaration.
(bfin_arch_setup): Turn into ...
(bfin_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-cris-low.cc (class cris_target) <low_arch_setup>: New
declaration.
(cris_arch_setup): Turn into ...
(cris_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-crisv32-low.cc (class crisv32_target) <low_arch_setup>: New
declaration.
(crisv32_arch_setup): Turn into ...
(crisv32_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-ia64-low.cc (class ia64_target) <low_arch_setup>: New
declaration.
(ia64_arch_setup): Turn into ...
(ia64_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-m32r-low.cc (class m32r_target) <low_arch_setup>: New
declaration.
(m32r_arch_setup): Turn into ...
(m32r_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-m68k-low.cc (class m68k_target) <low_arch_setup>: New
declaration.
(m68k_arch_setup): Turn into ...
(m68k_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target) <low_arch_setup>: New
declaration.
(mips_arch_setup): Turn into ...
(mips_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-nios2-low.cc (class nios2_target) <low_arch_setup>: New
declaration.
(nios2_arch_setup): Turn into ...
(nios2_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <low_arch_setup>: New
declaration.
(ppc_arch_setup): Turn into ...
(ppc_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-riscv-low.cc (class riscv_target) <low_arch_setup>: New
declaration.
(riscv_arch_setup): Turn into ...
(riscv_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <low_arch_setup>: New
declaration.
(s390_arch_setup): Turn into ...
(s390_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-sh-low.cc (class sh_target) <low_arch_setup>: New
declaration.
(sh_arch_setup): Turn into ...
(sh_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-sparc-low.cc (class sparc_target) <low_arch_setup>: New
declaration.
(sparc_arch_setup): Turn into ...
(sparc_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-tic6x-low.cc (class tic6x_target) <low_arch_setup>: New
declaration.
(tic6x_arch_setup): Turn into ...
(tic6x_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-tile-low.cc (class tile_target) <low_arch_setup>: New
declaration.
(tile_arch_setup): Turn into ...
(tile_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-xtensa-low.cc (class xtensa_target) <low_arch_setup>: New
declaration.
(xtensa_arch_setup): Turn into ...
(xtensa_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
|
|
This is the beginning of a series of patches that convert the linux
low targets into classes derived from linux_process_target. At the
end of the series we obtain a class hierarchy that looks like this:
process_stratum_target
^
|
|-- linux_process_target
^
|
|-- x86_target (defined in linux-x86-low)
|-- aarch64_target (defined in linux-aarch64-low)
|-- ppc_target (defined in linux-ppc-low)
|-- ...
In several cases, linux_process_target simply forwards a target op
request to a corresponding linux_target_ops function. For these
cases, the definition in linux_process_target will be removed and the
definition will be left to the deriving linux low target class; using
inheritance provides a nice and natural, object-oriented
simplification in these cases.
The series converts linux_target_ops into protected methods of
linux_process_target one by one. Throughout the series, based on the
needs, static functions defined in linux-low.cc are converted to
private methods of linux_process_target as well. This is done either
as separate patches or as integrated into a patch that convert a
particular linux_target_op into a method.
The series ends with the patch titled "gdbserver/linux-low: delete
'linux_target_ops' and 'the_low_target'".
Built and regression-tested on x86_64-linux. The following linux low
targets have been built (but not tested) via cross-compilation:
aarch64, arm, m68k, mips, ppc, riscv, s390, sh, sparc. The other
targets (bfin, cris, crisv32, ia64, m32r, nios2, tic6x, tile, xtensa)
were neither built nor tested.
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* linux-low.h (the_linux_target): New extern declaration.
* linux-low.cc (initialize_low): Use 'the_linux_target' to set
'the_target'.
(the_linux_target): Remove.
* linux-x86-low.cc (class x86_target): New class.
(the_x86_target): New static object.
(the_linux_target): Define as pointer to the_x86_target.
* linux-aarch64-low.cc (class aarch64_target): New class.
(the_aarch64_target): New static object.
(the_linux_target): Define as pointer to the_aarch64_target.
* linux-arm-low.cc (class arm_target): New class.
(the_arm_target): New static object.
(the_linux_target): Define as pointer to the_arm_target.
* linux-bfin-low.cc (class bfin_target): New class.
(the_bfin_target): New static object.
(the_linux_target): Define as pointer to the_bfin_target.
* linux-cris-low.cc (class cris_target): New class.
(the_cris_target): New static object.
(the_linux_target): Define as pointer to the_cris_target.
* linux-crisv32-low.cc (class crisv32_target): New class.
(the_crisv32_target): New static object.
(the_linux_target): Define as pointer to the_crisv32_target.
* linux-ia64-low.cc (class ia64_target): New class.
(the_ia64_target): New static object.
(the_linux_target): Define as pointer to the_ia64_target.
* linux-m32r-low.cc (class m32r_target): New class.
(the_m32r_target): New static object.
(the_linux_target): Define as pointer to the_m32r_target.
* linux-m68k-low.cc (class m68k_target): New class.
(the_m68k_target): New static object.
(the_linux_target): Define as pointer to the_m68k_target.
* linux-mips-low.cc (class mips_target): New class.
(the_mips_target): New static object.
(the_linux_target): Define as pointer to the_mips_target.
* linux-nios2-low.cc (class nios2_target): New class.
(the_nios2_target): New static object.
(the_linux_target): Define as pointer to the_nios2_target.
* linux-ppc-low.cc (class ppc_target): New class.
(the_ppc_target): New static object.
(the_linux_target): Define as pointer to the_ppc_target.
* linux-riscv-low.cc (class riscv_target): New class.
(the_riscv_target): New static object.
(the_linux_target): Define as pointer to the_riscv_target.
* linux-s390-low.cc (class s390_target): New class.
(the_s390_target): New static object.
(the_linux_target): Define as pointer to the_s390_target.
* linux-sh-low.cc (class sh_target): New class.
(the_sh_target): New static object.
(the_linux_target): Define as pointer to the_sh_target.
* linux-sparc-low.cc (class sparc_target): New class.
(the_sparc_target): New static object.
(the_linux_target): Define as pointer to the_sparc_target.
* linux-tic6x-low.cc (class tic6x_target): New class.
(the_tic6x_target): New static object.
(the_linux_target): Define as pointer to the_tic6x_target.
* linux-tile-low.cc (class tile_target): New class.
(the_tile_target): New static object.
(the_linux_target): Define as pointer to the_tile_target.
* linux-xtensa-low.cc (class xtensa_target): New class.
(the_xtensa_target): New static object.
(the_linux_target): Define as pointer to the_xtensa_target.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn some static functions in linux-low.cc into private methods of
linux_process_target.
* linux-low.cc (handle_extended_wait): Turn into ...
(linux_process_target::handle_extended_wait): ...this. Call
'mourn' on 'this' object instead of 'the_target'.
(maybe_move_out_of_jump_pad): Turn into...
(linux_process_target::maybe_move_out_of_jump_pad): ...this.
(linux_low_filter_event): Turn into...
(linux_process_target::filter_event): ...this.
(linux_wait_for_event_filtered): Turn into...
(linux_process_target::wait_for_event_filtered): ...this.
(linux_wait_for_event): Turn into...
(linux_process_target::wait_for_event): ...this.
(linux_wait_1): Turn into...
(linux_process_target::wait_1): ...this.
(wait_for_sigstop): Turn into...
(linux_process_target::wait_for_sigstop): ...this.
(move_out_of_jump_pad_callback): Turn into...
(linux_process_target::move_out_of_jump_pad): ...this.
(stop_all_lwps): Turn into...
(linux_process_target::stop_all_lwps): ...this.
(start_step_over): Turn into...
(linux_process_target::start_step_over): ...this.
(complete_ongoing_step_over): Turn into...
(linux_process_target::complete_ongoing_step_over): ...this.
(proceed_all_lwps): Turn into...
(linux_process_target::proceed_all_lwps): ...this.
(unstop_all_lwps): Turn into...
(linux_process_target::unstop_all_lwps): ...this.
* linux-low.h (class linux_process_target)
<handle_extended_wait>
<maybe_move_out_of_jump_pad>
filter_event>
<wait_for_event_filtered>
<wait_for_event>
<wait_1>
<wait_for_sigstop>
<move_out_of_jump_pad>
<stop_all_lwps>
<start_step_over>
<complete_ongoing_step_over>
<proceed_all_lwps>
<unstop_all_lwps>: Declare.
Update the callers below.
* linux-low.cc (linux_process_target::attach): Update.
(linux_process_target::stabilize_threads): Ditto.
(linux_process_target::wait): Ditto.
|
|
Now that 'process_stratum_target' has a single field left, namely 'pt'
of type 'process_target', and that all the requests to a
'process_stratum_target' are forwarded to 'pt', meld the
'process_target' class into 'process_stratum_target'.
This essentially means
1. All the references of the form 'the_target->pt' become 'the_target'.
2. All the uses of the name 'process_target' become
'process_stratum_target'.
3. The platform-specific target op vectors (e.g. linux_target_ops) are
removed and instances of their "process target" classes are used
instead.
gdbserver/ChangeLog:
2020-02-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* target.h (struct process_stratum_target): Remove.
(class process_target): Rename to ...
(class process_stratum_target): ... this.
* linux-low.h (class linux_process_target): Derive from
'process_stratum_target'.
* linux-low.cc (linux_target_ops): Remove.
(initialize_low): Set the_target to the singleton instance of
linux_process_target.
* lynx-low.h (class lynx_process_target): Derive from
'process_stratum_target'.
* lynx-low.cc (lynx_target_ops): Remove.
(initialize_low): Set the_target to the singleton instance of
lynx_process_target.
* nto-low.h (class nto_process_target): Derive from
'process_stratum_target'.
* nto-low.cc (nto_target_ops): Remove.
(initialize_low): Set the_target to the singleton instance of
nto_process_target.
* win32-low.h (class win32_process_target): Derive from
'process_stratum_target'.
* win32-low.cc (win32_target_ops): Remove.
(initialize_low): Set the_target to the singleton instance of
win32_process_target.
Replace 'the_target->pt' with 'the_target' in the uses below.
* hostio.cc (hostio_error)
(handle_setfs)
(handle_open)
(handle_unlink)
(handle_readlink)
* linux-aarch32-low.cc (arm_breakpoint_at)
* linux-aarch64-low.cc (aarch64_breakpoint_at)
* linux-arm-low.cc (arm_sigreturn_next_pc)
(arm_get_hwcap)
(arm_get_syscall_trapinfo)
* linux-cris-low.cc (cris_breakpoint_at)
* linux-crisv32-low.cc (cris_breakpoint_at)
* linux-low.cc (handle_extended_wait)
(linux_wait_1)
(linux_read_memory)
(linux_process_target::breakpoint_kind_from_pc)
(linux_get_auxv)
* linux-m32r-low.cc (m32r_breakpoint_at)
* linux-mips-low.cc (mips_breakpoint_at)
* linux-nios2-low.cc (nios2_breakpoint_at)
* linux-ppc-low.cc (ppc_breakpoint_at)
* linux-s390-low.cc (s390_get_hwcap)
* linux-sh-low.cc (sh_breakpoint_at)
* linux-sparc-low.cc (sparc_fill_gregset_to_stack)
(sparc_store_gregset_from_stack)
(sparc_breakpoint_at)
* linux-tic6x-low.cc (tic6x_breakpoint_at)
* linux-tile-low.cc (tile_breakpoint_at)
* linux-x86-low.cc (x86_breakpoint_at)
* linux-xtensa-low.cc (xtensa_breakpoint_at)
* mem-break.cc (bp_size)
(bp_opcode)
(insert_memory_breakpoint)
(set_raw_breakpoint_at)
(delete_raw_breakpoint)
(z_type_supported)
(uninsert_raw_breakpoint)
(reinsert_raw_breakpoint)
(validate_inserted_breakpoint)
* regcache.cc (regcache_read_pc)
(regcache_write_pc)
* remote-utils.cc (putpkt_binary_1)
(input_interrupt)
(getpkt)
(prepare_resume_reply)
* server.cc (handle_general_set)
(handle_detach)
(handle_qxfer_auxv)
(handle_qxfer_exec_file)
(handle_qxfer_libraries_svr4)
(handle_qxfer_osdata)
(handle_qxfer_siginfo)
(handle_qxfer_fdpic)
(handle_query)
(resume)
(handle_v_requests)
(queue_stop_reply_callback)
(captured_main)
* target.cc (prepare_to_access_memory)
(done_accessing_memory)
(read_inferior_memory)
(target_write_memory)
(target_stop_and_wait)
(target_wait)
(target_mourn_inferior)
(target_continue_no_signal)
(target_continue)
(target_supports_multi_process)
(kill_inferior)
* target.h
(target_create_inferior)
(target_post_create_inferior)
(myattach)
(target_supports_fork_events)
(target_supports_vfork_events)
(target_supports_exec_events)
(target_handle_new_gdb_connection)
(detach_inferior)
(mythread_alive)
(fetch_inferior_registers)
(store_inferior_registers)
(join_inferior)
(target_supports_non_stop)
(target_async)
(target_process_qsupported)
(target_supports_catch_syscall)
(target_get_ipa_tdesc_idx)
(target_supports_tracepoints)
(target_supports_fast_tracepoints)
(target_get_min_fast_tracepoint_insn_len)
(target_thread_stopped)
(target_pause_all)
(target_unpause_all)
(target_stabilize_threads)
(target_install_fast_tracepoint_jump_pad)
(target_emit_ops)
(target_supports_disable_randomization)
(target_supports_agent)
(target_enable_btrace)
(target_disable_btrace)
(target_read_btrace)
(target_read_btrace_conf)
(target_supports_range_stepping)
(target_supports_stopped_by_sw_breakpoint)
(target_stopped_by_sw_breakpoint)
(target_supports_stopped_by_hw_breakpoint)
(target_supports_hardware_single_step)
(target_stopped_by_hw_breakpoint)
(target_breakpoint_kind_from_pc)
(target_breakpoint_kind_from_current_state)
(target_supports_software_single_step)
(target_core_of_thread)
(target_thread_name)
(target_thread_handle)
* win32-low.cc (do_initial_child_stuff)
Rename target op default definitions listed below.
* target.cc (process_target::post_create_inferior): Rename as ...
(process_stratum_target::post_create_inferior): ... this.
(process_target::prepare_to_access_memory): Rename as ...
(process_stratum_target::prepare_to_access_memory): ... this.
(process_target::done_accessing_memory): Rename as ...
(process_stratum_target::done_accessing_memory): ... this.
(process_target::look_up_symbols): Rename as ...
(process_stratum_target::look_up_symbols): ... this.
(process_target::supports_read_auxv): Rename as ...
(process_stratum_target::supports_read_auxv): ... this.
(process_target::read_auxv): Rename as ...
(process_stratum_target::read_auxv): ... this.
(process_target::supports_z_point_type): Rename as ...
(process_stratum_target::supports_z_point_type): ... this.
(process_target::insert_point): Rename as ...
(process_stratum_target::insert_point): ... this.
(process_target::remove_point): Rename as ...
(process_stratum_target::remove_point): ... this.
(process_target::stopped_by_sw_breakpoint): Rename as ...
(process_stratum_target::stopped_by_sw_breakpoint): ... this.
(process_target::supports_stopped_by_sw_breakpoint): Rename as ...
(process_stratum_target::supports_stopped_by_sw_breakpoint): ... this.
(process_target::stopped_by_hw_breakpoint): Rename as ...
(process_stratum_target::stopped_by_hw_breakpoint): ... this.
(process_target::supports_stopped_by_hw_breakpoint): Rename as ...
(process_stratum_target::supports_stopped_by_hw_breakpoint): ... this.
(process_target::supports_hardware_single_step): Rename as ...
(process_stratum_target::supports_hardware_single_step): ... this.
(process_target::stopped_by_watchpoint): Rename as ...
(process_stratum_target::stopped_by_watchpoint): ... this.
(process_target::stopped_data_address): Rename as ...
(process_stratum_target::stopped_data_address): ... this.
(process_target::supports_read_offsets): Rename as ...
(process_stratum_target::supports_read_offsets): ... this.
(process_target::read_offsets): Rename as ...
(process_stratum_target::read_offsets): ... this.
(process_target::supports_get_tls_address): Rename as ...
(process_stratum_target::supports_get_tls_address): ... this.
(process_target::get_tls_address): Rename as ...
(process_stratum_target::get_tls_address): ... this.
(process_target::hostio_last_error): Rename as ...
(process_stratum_target::hostio_last_error): ... this.
(process_target::supports_qxfer_osdata): Rename as ...
(process_stratum_target::supports_qxfer_osdata): ... this.
(process_target::qxfer_osdata): Rename as ...
(process_stratum_target::qxfer_osdata): ... this.
(process_target::supports_qxfer_siginfo): Rename as ...
(process_stratum_target::supports_qxfer_siginfo): ... this.
(process_target::qxfer_siginfo): Rename as ...
(process_stratum_target::qxfer_siginfo): ... this.
(process_target::supports_non_stop): Rename as ...
(process_stratum_target::supports_non_stop): ... this.
(process_target::async): Rename as ...
(process_stratum_target::async): ... this.
(process_target::start_non_stop): Rename as ...
(process_stratum_target::start_non_stop): ... this.
(process_target::supports_multi_process): Rename as ...
(process_stratum_target::supports_multi_process): ... this.
(process_target::supports_fork_events): Rename as ...
(process_stratum_target::supports_fork_events): ... this.
(process_target::supports_vfork_events): Rename as ...
(process_stratum_target::supports_vfork_events): ... this.
(process_target::supports_exec_events): Rename as ...
(process_stratum_target::supports_exec_events): ... this.
(process_target::handle_new_gdb_connection): Rename as ...
(process_stratum_target::handle_new_gdb_connection): ... this.
(process_target::handle_monitor_command): Rename as ...
(process_stratum_target::handle_monitor_command): ... this.
(process_target::core_of_thread): Rename as ...
(process_stratum_target::core_of_thread): ... this.
(process_target::supports_read_loadmap): Rename as ...
(process_stratum_target::supports_read_loadmap): ... this.
(process_target::read_loadmap): Rename as ...
(process_stratum_target::read_loadmap): ... this.
(process_target::process_qsupported): Rename as ...
(process_stratum_target::process_qsupported): ... this.
(process_target::supports_tracepoints): Rename as ...
(process_stratum_target::supports_tracepoints): ... this.
(process_target::read_pc): Rename as ...
(process_stratum_target::read_pc): ... this.
(process_target::write_pc): Rename as ...
(process_stratum_target::write_pc): ... this.
(process_target::supports_thread_stopped): Rename as ...
(process_stratum_target::supports_thread_stopped): ... this.
(process_target::thread_stopped): Rename as ...
(process_stratum_target::thread_stopped): ... this.
(process_target::supports_get_tib_address): Rename as ...
(process_stratum_target::supports_get_tib_address): ... this.
(process_target::get_tib_address): Rename as ...
(process_stratum_target::get_tib_address): ... this.
(process_target::pause_all): Rename as ...
(process_stratum_target::pause_all): ... this.
(process_target::unpause_all): Rename as ...
(process_stratum_target::unpause_all): ... this.
(process_target::stabilize_threads): Rename as ...
(process_stratum_target::stabilize_threads): ... this.
(process_target::supports_fast_tracepoints): Rename as ...
(process_stratum_target::supports_fast_tracepoints): ... this.
(process_target::get_min_fast_tracepoint_insn_len): Rename as ...
(process_stratum_target::get_min_fast_tracepoint_insn_len): ... this.
(process_target::emit_ops): Rename as ...
(process_stratum_target::emit_ops): ... this.
(process_target::supports_disable_randomization): Rename as ...
(process_stratum_target::supports_disable_randomization): ... this.
(process_target::supports_qxfer_libraries_svr4): Rename as ...
(process_stratum_target::supports_qxfer_libraries_svr4): ... this.
(process_target::qxfer_libraries_svr4): Rename as ...
(process_stratum_target::qxfer_libraries_svr4): ... this.
(process_target::supports_agent): Rename as ...
(process_stratum_target::supports_agent): ... this.
(process_target::enable_btrace): Rename as ...
(process_stratum_target::enable_btrace): ... this.
(process_target::disable_btrace): Rename as ...
(process_stratum_target::disable_btrace): ... this.
(process_target::read_btrace): Rename as ...
(process_stratum_target::read_btrace): ... this.
(process_target::read_btrace_conf): Rename as ...
(process_stratum_target::read_btrace_conf): ... this.
(process_target::supports_range_stepping): Rename as ...
(process_stratum_target::supports_range_stepping): ... this.
(process_target::supports_pid_to_exec_file): Rename as ...
(process_stratum_target::supports_pid_to_exec_file): ... this.
(process_target::pid_to_exec_file): Rename as ...
(process_stratum_target::pid_to_exec_file): ... this.
(process_target::supports_multifs): Rename as ...
(process_stratum_target::supports_multifs): ... this.
(process_target::multifs_open): Rename as ...
(process_stratum_target::multifs_open): ... this.
(process_target::multifs_unlink): Rename as ...
(process_stratum_target::multifs_unlink): ... this.
(process_target::multifs_readlink): Rename as ...
(process_stratum_target::multifs_readlink): ... this.
(process_target::breakpoint_kind_from_pc): Rename as ...
(process_stratum_target::breakpoint_kind_from_pc): ... this.
(process_target::breakpoint_kind_from_current_state): Rename as ...
(process_stratum_target::breakpoint_kind_from_current_state): ... this.
(process_target::thread_name): Rename as ...
(process_stratum_target::thread_name): ... this.
(process_target::thread_handle): Rename as ...
(process_stratum_target::thread_handle): ... this.
(process_target::supports_software_single_step): Rename as ...
(process_stratum_target::supports_software_single_step): ... this.
(process_target::supports_catch_syscall): Rename as ...
(process_stratum_target::supports_catch_syscall): ... this.
(process_target::get_ipa_tdesc_idx): Rename as ...
(process_stratum_target::get_ipa_tdesc_idx): ... this.
|
|
gdbserver/ChangeLog:
2020-02-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn process_stratum_target's get_ipa_tdesc_idx op into a method
of process_target.
* target.h (struct process_stratum_target): Remove the target op.
(class process_target): Add the target op.
(target_get_ipa_tdesc_idx): Update the macro.
* target.cc (process_target::get_ipa_tdesc_idx): Define.
Update the derived classes and callers below.
* linux-low.cc (linux_target_ops): Update.
(linux_get_ipa_tdesc_idx): Turn into ...
(linux_process_target::get_ipa_tdesc_idx): ... this.
* linux-low.h (class linux_process_target): Update.
* lynx-low.cc (lynx_target_ops): Update.
* nto-low.cc (nto_target_ops): Update.
* win32-low.cc (win32_target_ops): Update.
|
|
gdbserver/ChangeLog:
2020-02-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn process_stratum_target's supports_catch_syscall op into a
method of process_target.
* target.h (struct process_stratum_target): Remove the target op.
(class process_target): Add the target op.
(target_supports_catch_syscall): Update the macro.
* target.cc (process_target::supports_catch_syscall): Define.
Update the derived classes and callers below.
* linux-low.cc (linux_target_ops): Update.
(linux_supports_catch_syscall): Turn into ...
(linux_process_target::supports_catch_syscall): ... this.
* linux-low.h (class linux_process_target): Update.
* lynx-low.cc (lynx_target_ops): Update.
* nto-low.cc (nto_target_ops): Update.
* win32-low.cc (win32_target_ops): Update.
|
|
gdbserver/ChangeLog:
2020-02-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn process_stratum_target's supports_software_single_step op
into a method of process_target.
* target.h (struct process_stratum_target): Remove the target op.
(class process_target): Add the target op.
(target_supports_software_single_step): Update the macro.
* target.cc (process_target::supports_software_single_step): Define.
Update the derived classes and callers below.
* linux-low.cc (linux_target_ops): Update.
(linux_supports_software_single_step): Turn into ...
(linux_process_target::supports_software_single_step): ... this.
* linux-low.h (class linux_process_target): Update.
* lynx-low.cc (lynx_target_ops): Update.
* nto-low.cc (nto_target_ops): Update.
* win32-low.cc (win32_target_ops): Update.
|
|
gdbserver/ChangeLog:
2020-02-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn process_stratum_target's thread_name and thread_handle ops
into methods of process_target.
* target.h (struct process_stratum_target): Remove the target ops.
(class process_target): Add the target ops.
(target_thread_name): Update the macro.
(target_thread_handle): Update the macro.
* target.cc (process_target::thread_name): Define.
(process_target::thread_handle): Define.
Update the derived classes and callers below.
* linux-low.cc (linux_target_ops): Update.
(linux_process_target::thread_name): Define.
(linux_process_target::thread_handle): Define.
* linux-low.h (class linux_process_target): Update.
* lynx-low.cc (lynx_target_ops): Update.
* nto-low.cc (nto_target_ops): Update.
* win32-low.cc (win32_target_ops): Update.
|
|
gdbserver/ChangeLog:
2020-02-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn process_stratum_target's breakpoint_kind_from_pc,
sw_breakpoint_from_kind, and breakpoint_kind_from_current_state
ops into methods of process_target.
* target.h (struct process_stratum_target): Remove the target op.
(class process_target): Add the target op.
(target_breakpoint_kind_from_pc): Update the macro.
(target_breakpoint_kind_from_current_state): Update the macro.
(default_breakpoint_kind_from_pc): Remove declaration.
* target.cc (default_breakpoint_kind_from_pc): Turn into ...
(process_target::breakpoint_kind_from_pc): ... this.
(process_target::breakpoint_kind_from_current_state): Define.
Update the derived classes and callers below.
* mem-break.cc (bp_size): Update.
(bp_opcode): Update.
* linux-low.cc (linux_target_ops): Update.
(linux_wait_1): Update.
(linux_breakpoint_kind_from_pc): Turn into ...
(linux_process_target::breakpoint_kind_from_pc): ... this.
(linux_sw_breakpoint_from_kind): Turn into ...
(linux_process_target::sw_breakpoint_from_kind): ... this.
(linux_breakpoint_kind_from_current_state): Turn into ...
(linux_process_target::breakpoint_kind_from_current_state): ... this.
* linux-low.h (class linux_process_target): Update.
* lynx-low.cc (lynx_target_ops): Update.
(lynx_process_target::sw_breakpoint_from_kind): Define.
* lynx-low.h (class lynx_process_target): Update.
* nto-low.cc (nto_target_ops): Update.
(nto_sw_breakpoint_from_kind): Turn into ...
(nto_process_target::sw_breakpoint_from_kind): ... this.
* nto-low.h (class nto_process_target): Update.
* win32-low.cc (win32_target_ops): Update.
(win32_sw_breakpoint_from_kind): Turn into ...
(win32_process_target::sw_breakpoint_from_kind): ... this.
* win32-low.h (class win32_process_target): Update.
|
|
gdbserver/ChangeLog:
2020-02-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn process_stratum_target's multifs_open, multifs_readlink,
multifs_unlink ops into methods of process_target.
* target.h (struct process_stratum_target): Remove the target ops.
(class process_target): Add the target ops. Also add
'supports_multifs'.
* target.cc: Include "fcntl.h", "unistd.h", "sys/types.h", and
"sys/stat.h".
(process_target::supports_multifs): Define.
(process_target::multifs_open): Define.
(process_target::multifs_readlink): Define.
(process_target::multifs_unlink): Define.
Update the derived classes and callers below.
* hostio.cc (handle_setfs): Update.
(handle_open): Update.
(handle_unlink): Update.
(handle_readlink): Update.
* linux-low.cc (linux_target_ops): Update.
(linux_process_target::supports_multifs): Define.
(linux_process_target::multifs_open): Define.
(linux_process_target::multifs_readlink): Define.
(linux_process_target::multifs_unlink): Define.
* linux-low.h (class linux_process_target): Update.
* lynx-low.cc (lynx_target_ops): Update.
* nto-low.cc (nto_target_ops): Update.
* win32-low.cc (win32_target_ops): Update.
|
|
gdbserver/ChangeLog:
2020-02-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn process_stratum_target's pid_to_exec_file op into a method
of process_target.
* target.h (struct process_stratum_target): Remove the target op.
(class process_target): Add the target op. Also add
'supports_pid_to_exec_file'.
* target.cc (process_target::pid_to_exec_file): Define.
(process_target::supports_pid_to_exec_file): Define.
Update the derived classes and callers below.
* server.cc (handle_qxfer_exec_file): Update.
(handle_query): Update.
* linux-low.cc (linux_target_ops): Update.
(linux_process_target::supports_pid_to_exec_file): Define.
(linux_process_target::pid_to_exec_file): Define.
* linux-low.h (class linux_process_target): Update.
* lynx-low.cc (lynx_target_ops): Update.
* nto-low.cc (nto_target_ops): Update.
* win32-low.cc (win32_target_ops): Update.
|
|
gdbserver/ChangeLog:
2020-02-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn process_stratum_target's supports_range_stepping op into a
method of process_target.
* target.h (struct process_stratum_target): Remove the target op.
(class process_target): Add the target op.
(target_supports_range_stepping): Update the macro.
* target.cc (process_target::supports_range_stepping): Define.
Update the derived classes and callers below.
* linux-low.cc (linux_target_ops): Update.
(linux_supports_range_stepping): Turn into ...
(linux_process_target::supports_range_stepping): ... this.
* linux-low.h (class linux_process_target): Update.
* lynx-low.cc (lynx_target_ops): Update.
* nto-low.cc (nto_target_ops): Update.
* win32-low.cc (win32_target_ops): Update.
|
