| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add remote_debug_printf, and use it for all debug messages controlled by
remote_debug.
Change remote_debug to be a bool, which is trivial in this case.
Change-Id: I90de13cb892faec3830047b571661822b126d6e8
|
|
Add the threads_debug_printf and THREADS_SCOPED_DEBUG_ENTER_EXIT, which
use the logging infrastructure from gdbsupport/common-debug.h. Replace
all debug_print uses that are predicated by debug_threads with
threads_dethreads_debug_printf. Replace uses of the debug_enter and
debug_exit macros with THREADS_SCOPED_DEBUG_ENTER_EXIT, which serves
essentially the same purpose, but allows showing what comes between the
enter and the exit in an indented form.
Note that "threads" debug is currently used for a bit of everything in
GDBserver, not only threads related stuff. It should ideally be cleaned
up and separated logically as is done in GDB, but that's out of the
scope of this patch.
Change-Id: I2d4546464462cb4c16f7f1168c5cec5a89f2289a
|
|
debug_threads is always used as a boolean. Except in ax.cc and
tracepoint.cc. These files have their own macros that use
debug_threads, and have a concept of verbosity level. But they both
have a single level, so it's just a boolean in the end.
Remove this concept of level. If we ever want to re-introduce it, I
think it will be better implemented in a more common location.
Change debug_threads to bool and adjust some users that were treating it
as an int.
Change-Id: I137f596eaf763a08c977dd74417969cedfee9ecf
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
I'm trying to enable clang's -Wmissing-variable-declarations warning.
This patch fixes all the obvious spots where we can simply add "static"
(at least, found when building on x86-64 Linux).
gdb/ChangeLog:
* aarch64-linux-tdep.c (aarch64_linux_record_tdep): Make static.
* aarch64-tdep.c (tdesc_aarch64_list, aarch64_prologue_unwind,
aarch64_stub_unwind, aarch64_normal_base, ): Make static.
* arm-linux-tdep.c (arm_prologue_unwind): Make static.
* arm-tdep.c (struct frame_unwind): Make static.
* auto-load.c (auto_load_safe_path_vec): Make static.
* csky-tdep.c (csky_stub_unwind): Make static.
* gdbarch.c (gdbarch_data_registry): Make static.
* gnu-v2-abi.c (gnu_v2_abi_ops): Make static.
* i386-netbsd-tdep.c (i386nbsd_mc_reg_offset): Make static.
* i386-tdep.c (i386_frame_setup_skip_insns,
i386_tramp_chain_in_reg_insns, i386_tramp_chain_on_stack_insns):
Make static.
* infrun.c (observer_mode): Make static.
* linux-nat.c (sigchld_action): Make static.
* linux-thread-db.c (thread_db_list): Make static.
* maint-test-options.c (maintenance_test_options_list):
* mep-tdep.c (mep_csr_registers): Make static.
* mi/mi-cmds.c (struct mi_cmd_stats): Remove struct type name.
(stats): Make static.
* nat/linux-osdata.c (struct osdata_type): Make static.
* ppc-netbsd-tdep.c (ppcnbsd_reg_offsets): Make static.
* progspace.c (last_program_space_num): Make static.
* python/py-param.c (struct parm_constant): Remove struct type
name.
(parm_constants): Make static.
* python/py-record-btrace.c (btpy_list_methods): Make static.
* python/py-record.c (recpy_gap_type): Make static.
* record.c (record_goto_cmdlist): Make static.
* regcache.c (regcache_descr_handle): Make static.
* registry.h (DEFINE_REGISTRY): Make definition static.
* symmisc.c (std_in, std_out, std_err): Make static.
* top.c (previous_saved_command_line): Make static.
* tracepoint.c (trace_user, trace_notes, trace_stop_notes): Make
static.
* unittests/command-def-selftests.c (nr_duplicates,
nr_invalid_prefixcmd, lists): Make static.
* unittests/observable-selftests.c (test_notification): Make
static.
* unittests/optional/assignment/1.cc (counter): Make static.
* unittests/optional/assignment/2.cc (counter): Make static.
* unittests/optional/assignment/3.cc (counter): Make static.
* unittests/optional/assignment/4.cc (counter): Make static.
* unittests/optional/assignment/5.cc (counter): Make static.
* unittests/optional/assignment/6.cc (counter): Make static.
gdbserver/ChangeLog:
* ax.cc (bytecode_address_table): Make static.
* debug.cc (debug_file): Make static.
* linux-low.cc (stopping_threads): Make static.
(step_over_bkpt): Make static.
* linux-x86-low.cc (amd64_emit_ops, i386_emit_ops): Make static.
* tracepoint.cc (stop_tracing_bkpt, flush_trace_buffer_bkpt,
alloced_trace_state_variables, trace_buffer_ctrl,
tracing_start_time, tracing_stop_time, tracing_user_name,
tracing_notes, tracing_stop_note): Make static.
Change-Id: Ic1d8034723b7802502bda23770893be2338ab020
|
|
I spent a lot of time reading infrun debug logs recently, and I think
they could be made much more readable by being indented, to clearly see
what operation is done as part of what other operation. In the current
format, there are no visual cues to tell where things start and end,
it's just a big flat list. It's also difficult to understand what
caused a given operation (e.g. a call to resume_1) to be done.
To help with this, I propose to add the new scoped_debug_start_end
structure, along with a bunch of macros to make it convenient to use.
The idea of scoped_debug_start_end is simply to print a start and end
message at construction and destruction. It also increments/decrements
a depth counter in order to make debug statements printed during this
range use some indentation. Some care is taken to handle the fact that
debug can be turned on or off in the middle of such a range. For
example, a "set debug foo 1" command in a breakpoint command, or a
superior GDB manually changing the debug_foo variable.
Two macros are added in gdbsupport/common-debug.h, which are helpers to
define module-specific macros:
- scoped_debug_start_end: takes a message that is printed both at
construction / destruction, with "start: " and "end: " prefixes.
- scoped_debug_enter_exit: prints hard-coded "enter" and "exit"
messages, to denote the entry and exit of a function.
I added some examples in the infrun module to give an idea of how it can
be used and what the result looks like. The macros are in capital
letters (INFRUN_SCOPED_DEBUG_START_END and
INFRUN_SCOPED_DEBUG_ENTER_EXIT) to mimic the existing SCOPE_EXIT, but
that can be changed if you prefer something else.
Here's an excerpt of the debug
statements printed when doing "continue", where a displaced step is
started:
[infrun] proceed: enter
[infrun] proceed: addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT
[infrun] global_thread_step_over_chain_enqueue: enqueueing thread Thread 0x7ffff75a5640 (LWP 2289301) in global step over chain
[infrun] start_step_over: enter
[infrun] start_step_over: stealing global queue of threads to step, length = 1
[infrun] start_step_over: resuming [Thread 0x7ffff75a5640 (LWP 2289301)] for step-over
[infrun] resume_1: step=1, signal=GDB_SIGNAL_0, trap_expected=1, current thread [Thread 0x7ffff75a5640 (LWP 2289301)] at 0x5555555551bd
[displaced] displaced_step_prepare_throw: displaced-stepping Thread 0x7ffff75a5640 (LWP 2289301) now
[displaced] prepare: selected buffer at 0x5555555550c2
[displaced] prepare: saved 0x5555555550c2: 1e fa 31 ed 49 89 d1 5e 48 89 e2 48 83 e4 f0 50
[displaced] amd64_displaced_step_copy_insn: copy 0x5555555551bd->0x5555555550c2: c7 45 fc 00 00 00 00 eb 13 8b 05 d4 2e 00 00 83
[displaced] displaced_step_prepare_throw: prepared successfully thread=Thread 0x7ffff75a5640 (LWP 2289301), original_pc=0x5555555551bd, displaced_pc=0x5555555550c2
[displaced] resume_1: run 0x5555555550c2: c7 45 fc 00
[infrun] infrun_async: enable=1
[infrun] prepare_to_wait: prepare_to_wait
[infrun] start_step_over: [Thread 0x7ffff75a5640 (LWP 2289301)] was resumed.
[infrun] operator(): step-over queue now empty
[infrun] start_step_over: exit
[infrun] proceed: start: resuming threads, all-stop-on-top-of-non-stop
[infrun] proceed: resuming Thread 0x7ffff7da7740 (LWP 2289296)
[infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [Thread 0x7ffff7da7740 (LWP 2289296)] at 0x7ffff7f7d9b7
[infrun] prepare_to_wait: prepare_to_wait
[infrun] proceed: resuming Thread 0x7ffff7da6640 (LWP 2289300)
[infrun] resume_1: thread Thread 0x7ffff7da6640 (LWP 2289300) has pending wait status status->kind = stopped, signal = GDB_SIGNAL_TRAP (currently_stepping=0).
[infrun] prepare_to_wait: prepare_to_wait
[infrun] proceed: [Thread 0x7ffff75a5640 (LWP 2289301)] resumed
[infrun] proceed: resuming Thread 0x7ffff6da4640 (LWP 2289302)
[infrun] resume_1: thread Thread 0x7ffff6da4640 (LWP 2289302) has pending wait status status->kind = stopped, signal = GDB_SIGNAL_TRAP (currently_stepping=0).
[infrun] prepare_to_wait: prepare_to_wait
[infrun] proceed: end: resuming threads, all-stop-on-top-of-non-stop
[infrun] proceed: exit
We can easily see where the call to `proceed` starts and end. We can
also see why there are a bunch of resume_1 calls, it's because we are
resuming threads, emulating all-stop on top of a non-stop target.
We also see that debug statements nest well with other modules that have
been migrated to use the "new" debug statement helpers (because they all
use debug_prefixed_vprintf in the end. I think this is desirable, for
example we could see the debug statements about reading the DWARF info
of a library nested under the debug statements about loading that
library.
Of course, modules that haven't been migrated to use the "new" helpers
will still print without indentations. This will be one good reason to
migrate them.
I think the runtime cost (when debug statements are disabled) of this is
reasonable, given the improvement in readability. There is the cost of
the conditionals (like standard debug statements), one more condition
(if (m_must_decrement_print_depth)) and the cost of constructing a stack
object, which means copying a fews pointers.
Adding the print in fetch_inferior_event breaks some tests that use "set
debug infrun", because it prints a debug statement after the prompt. I
adapted these tests to cope with it, by using the "-prompt" switch of
gdb_test_multiple to as if this debug statement is part of the expected
prompt. It's unfortunate that we have to do this, but I think the debug
print is useful, and I don't want a few tests to get in the way of
adding good debug output.
gdbsupport/ChangeLog:
* common-debug.h (debug_print_depth): New.
(struct scoped_debug_start_end): New.
(scoped_debug_start_end): New.
(scoped_debug_enter_exit): New.
* common-debug.cc (debug_prefixed_vprintf): Print indentation.
gdb/ChangeLog:
* debug.c (debug_print_depth): New.
* infrun.h (INFRUN_SCOPED_DEBUG_START_END): New.
(INFRUN_SCOPED_DEBUG_ENTER_EXIT): New.
* infrun.c (start_step_over): Use
INFRUN_SCOPED_DEBUG_ENTER_EXIT.
(proceed): Use INFRUN_SCOPED_DEBUG_ENTER_EXIT and
INFRUN_SCOPED_DEBUG_START_END.
(fetch_inferior_event): Use INFRUN_SCOPED_DEBUG_ENTER_EXIT.
gdbserver/ChangeLog:
* debug.cc (debug_print_depth): New.
gdb/testsuite/ChangeLog:
* gdb.base/ui-redirect.exp: Expect infrun debug print after
prompt.
* gdb.threads/ia64-sigill.exp: Likewise.
* gdb.threads/watchthreads-reorder.exp: Likewise.
Change-Id: I7c3805e6487807aa63a1bae318876a0c69dce949
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
For the same reasons outlined in the previous patch, this patch renames
gdbserver source files to .cc.
I have moved the "-x c++" switch to only those rules that require it.
gdbserver/ChangeLog:
* Makefile.in: Rename source files from .c to .cc.
* %.c: Rename to %.cc.
* configure.ac: Rename server.c to server.cc.
* configure: Re-generate.
|
