aboutsummaryrefslogtreecommitdiff
path: root/gdbserver/configure
AgeCommit message (Collapse)AuthorFilesLines
2020-07-30Unify Solaris procfs and largefile handlingRainer Orth1-25/+32
GDB currently doesn't build on 32-bit Solaris: * On Solaris 11.4/x86: In file included from /usr/include/sys/procfs.h:26, from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24: /usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment" #error "Cannot use procfs in the large file compilation environment" ^~~~~ * On Solaris 11.3/x86 there are several more instances of this. The interaction between procfs and large-file support historically has been a royal mess on Solaris: * There are two versions of the procfs interface: ** The old ioctl-based /proc, deprecated and not used any longer in either gdb or binutils. ** The `new' (introduced in Solaris 2.6, 1997) structured /proc. * There are two headers one can possibly include: ** <procfs.h> which only provides the structured /proc, definining _STRUCTURED_PROC=1 and then including ... ** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based /proc, but provides structured /proc if _STRUCTURED_PROC == 1. * procfs and the large-file environment didn't go well together: ** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit compilations when the large-file environment was active (_FILE_OFFSET_BITS == 64). ** In both Solaris 11.4 and Illumos, this restriction was lifted for structured /proc. So one has to be careful always to define _STRUCTURED_PROC=1 when testing for or using <sys/procfs.h> on Solaris. As the errors above show, this isn't always the case in binutils-gdb right now. Also one may need to disable large-file support for 32-bit compilations on Solaris. config/largefile.m4 meant to do this by wrapping the AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because it neglects the _STRUCTURED_PROC part. To make things even worse, since GCC 9 g++ predefines _FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to enable large-file support, this has no effect, breaking the gdb build. This patch addresses all this as follows: * All tests for the <sys/procfs.h> header are made with _STRUCTURED_PROC=1, the definition going into the various config.h files instead of having to make them (and sometimes failing) in the affected sources. * To cope with the g++ predefine of _FILE_OFFSET_BITS=64, -U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had been far easier to have just #undef _FILE_OFFSET_BITS in config.h, but unfortunately such a construct in config.in is commented by config.status irrespective of indentation and whitespace if large-file support is disabled. I found no way around this and putting the #undef in several global headers for bfd, binutils, ld, and gdb seemed way more invasive. * Last, the applicability check in largefile.m4 was modified only to disable largefile support if really needed. To do so, it checks if <sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it doesn't, the disabling only happens if gdb exists in-tree and isn't disabled, otherwise (building binutils from a tarball), there's no conflict. What initially confused me was the check for $plugins here, which originally caused the disabling not to take place. Since AC_PLUGINGS does enable plugin support if <dlfcn.h> exists (which it does on Solaris), the disabling never happened. I could find no explanation why the linker plugin needs large-file support but thought it would be enough if gld and GCC's lto-plugin agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not enough: lto-plugin uses the simple-object interface from libiberty, which includes off_t arguments. So to fully disable large-file support would mean also disabling it in libiberty and its users: gcc and libstdc++-v3. This seems highly undesirable, so I decided to disable the linker plugin instead if large-file support won't work. The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to predefined _FILE_OFFSET_BITS=64). Also regtested on amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4), x86_64-pc-linux-gnu and i686-pc-linux-gnu. config: * largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>: Check for <sys/procfs.h> incompatilibity with large-file support on Solaris. Only disable large-file support and perhaps plugins if needed. Set, substitute LARGEFILE_CPPFLAGS if so. bfd: * bfd.m4 (BFD_SYS_PROCFS_H): New macro. (BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H. Don't define _STRUCTURED_PROC. (BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise. * elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define. * configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>. * configure, config.in: Regenerate. * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. binutils: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. * configure: Regenerate. gas: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. * configure: Regenerate. gdb: * proc-api.c (_STRUCTURED_PROC): Don't define. * proc-events.c: Likewise. * proc-flags.c: Likewise. * proc-why.c: Likewise. * procfs.c: Likewise. * Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * configure, config.in: Regenerate. gdbserver: * configure, config.in: Regenerate. gdbsupport: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>. * Makefile.in: Regenerate. * configure, config.in: Regenerate. gnulib: * configure.ac: Run ACX_LARGEFILE before gl_EARLY. * configure: Regenerate. gprof: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in: Regenerate. * configure: Regenerate. ld: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in: Regenerate. * configure: Regenerate.
2020-07-26Don't unnecessarily redefine 'socklen_t' type in MinGW builds.Eli Zaretskii1-2/+6
The original configure-time tests in gdb/ and gdbserver/ failed to detect that 'socklen_t' is defined in MinGW headers because the test program included only sys/socket.h, which is absent in MinGW system headers. However on MS-Windows this data type is declared in another header, ws2tcpip.h. The modified test programs try using ws2tcpip.h if sys/socket.h is unavailable. Thanks to Joel Brobecker who helped me regenerate the configure scripts and the config.in files. gdb/ChangeLog: 2020-07-26 Eli Zaretskii <eliz@gnu.org> * configure.ac (AC_CHECK_HEADERS): Check for sys/socket.h and ws2tcpip.h. When checking whether socklen_t type is defined, use ws2tcpip.h if it is available and sys/socket.h isn't. * configure: Regenerate. * config.in: Regenerate. gdbserver/ChangeLog: 2020-07-26 Eli Zaretskii <eliz@gnu.org> * configure.ac (AC_CHECK_HEADERS): Add ws2tcpip.h. When checking whether socklen_t type is defined, use ws2tcpip.h if it is available and sys/socket.h isn't. * configure: Regenerate. * config.in: Regenerate.
2020-06-12gdbserver: remove support for NeutrinoSimon Marchi1-2/+0
This port has been unmaintained for years, remove it. gdbserver/ChangeLog: * configure: Re-generate. * configure.ac: Remove srv_qnx test. * configure.srv: Remove nto case. * nto-low.cc, nto-low.h, nto-x86-low.cc: Remove. * remote-utils.c: Remove __QNX__-guarded code. Change-Id: I8a1ad9c740a69352da1f6993778dbf951eebb22f
2020-06-12gdbserver: remove support for LynxOSSimon Marchi1-2/+0
This port has been unmaintained for years, remove it. gdbserver/ChangeLog: * configure: Re-generate. * configure.ac: Remove srv_lynxos test. * configure.srv: Remove lynxos cases. * lynx-i386-low.cc, lynx-low.cc, lynx-low.h, lynx-ppc-low.c: Remove. Change-Id: I239d1cf1fc7b4c7a174251bc7981707eaba7d972
2020-04-27gdb, gdbserver: remove configure check for fs_base/gs_base in user_regs_structSimon Marchi1-28/+0
I recently stumbled on this code mentioning Linux kernel 2.6.25, and thought it could be time for some spring cleaning (newer GDBs probably don't need to supports 12-year old kernels). I then found that the "legacy" case is probably broken anyway, which gives an even better motivation for its removal. In short, this patch removes the configure checks that check if user_regs_struct contains the fs_base/gs_base fields and adjusts all uses of the HAVE_STRUCT_USER_REGS_STRUCT_{FS,GS}_BASE macros. The longer explanation/rationale follows. Apparently, Linux kernels since 2.6.25 (that's from 2008) have been reliably providing fs_base and gs_base as part of user_regs_struct. Commit df5d438e33d7 in the Linux kernel [1] seems related. This means that we can get these values by reading registers with PTRACE_GETREGS. Previously, these values were obtained using a separate PTRACE_ARCH_PRCTL ptrace call. First, I'm not even sure the configure check was really right in the first place. The user_regs_struct used by GDB comes from /usr/include/x86_64-linux-gnu/sys/user.h (or equivalent on other distros) and is provided by glibc. glibc has had the fs_base/gs_base fields in there for a very long time, at least since this commit from 2001 [2]. The Linux kernel also has its version of user_regs_struct, which I think was exported to user-space at some point. It included the fs_base/gs_base fields since at least this 2002 commit [3]. In any case, my conclusion is that the fields were there long before the aforementioned Linux kernel commit. The kernel commit didn't add these fields, it only made sure that they have reliable values when obtained with PTRACE_GETREGS. So, checking for the presence of the fs_base/gs_base fields in struct user_regs_struct doesn't sound like a good way of knowing if we can reliably get the fs_base/gs_base values from PTRACE_GETREGS. My guess is that if we were using that strategy on a < 2.6.25 kernel, things would not work correctly: - configure would find that the user_regs_struct has the fs_base/gs_base fields (which are probided by glibc anyway) - we would be reading the fs_base/gs_base values using PTRACE_GETREGS, for which the kernel would provide unreliable values Second, I have tried to see how things worked by forcing GDB to not use fs_base/gs_base from PTRACE_GETREGS (forcing it to use the "legacy" code, by configuring with ac_cv_member_struct_user_regs_struct_gs_base=no ac_cv_member_struct_user_regs_struct_fs_base=no Doing so breaks writing registers back to the inferior. For example, calling an inferior functions gives an internal error: (gdb) p malloc(10) /home/smarchi/src/binutils-gdb/gdb/i387-tdep.c:1408: internal-error: invalid i387 regnum 152 The relevant last frames where this error happens are: #8 0x0000563123d262fc in internal_error (file=0x563123e93fd8 "/home/smarchi/src/binutils-gdb/gdb/i387-tdep.c", line=1408, fmt=0x563123e94482 "invalid i387 regnum %d") at /home/smarchi/src/binutils-gdb/gdbsupport/errors.cc:55 #9 0x0000563123047d0d in i387_collect_xsave (regcache=0x5631269453f0, regnum=152, xsave=0x7ffd38402a20, gcore=0) at /home/smarchi/src/binutils-gdb/gdb/i387-tdep.c:1408 #10 0x0000563122c69e8a in amd64_collect_xsave (regcache=0x5631269453f0, regnum=152, xsave=0x7ffd38402a20, gcore=0) at /home/smarchi/src/binutils-gdb/gdb/amd64-tdep.c:3448 #11 0x0000563122c5e94c in amd64_linux_nat_target::store_registers (this=0x56312515fd10 <the_amd64_linux_nat_target>, regcache=0x5631269453f0, regnum=152) at /home/smarchi/src/binutils-gdb/gdb/amd64-linux-nat.c:335 #12 0x00005631234c8c80 in target_store_registers (regcache=0x5631269453f0, regno=152) at /home/smarchi/src/binutils-gdb/gdb/target.c:3485 #13 0x00005631232e8df7 in regcache::raw_write (this=0x5631269453f0, regnum=152, buf=0x56312759e468 "@\225\372\367\377\177") at /home/smarchi/src/binutils-gdb/gdb/regcache.c:765 #14 0x00005631232e8f0c in regcache::cooked_write (this=0x5631269453f0, regnum=152, buf=0x56312759e468 "@\225\372\367\377\177") at /home/smarchi/src/binutils-gdb/gdb/regcache.c:778 #15 0x00005631232e75ec in regcache::restore (this=0x5631269453f0, src=0x5631275eb130) at /home/smarchi/src/binutils-gdb/gdb/regcache.c:283 #16 0x0000563123083fc4 in infcall_suspend_state::restore (this=0x5631273ed930, gdbarch=0x56312718cf20, tp=0x5631270bca90, regcache=0x5631269453f0) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:9103 #17 0x0000563123081eed in restore_infcall_suspend_state (inf_state=0x5631273ed930) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:9151 The problem seems to be that amd64_linux_nat_target::store_registers calls amd64_native_gregset_supplies_p to know whether gregset provides fs_base. When !HAVE_STRUCT_USER_REGS_STRUCT_FS_BASE, amd64_native_gregset_supplies_p returns false. store_registers therefore assumes that it must be an "xstate" register. This is of course wrong, and that leads to the failed assertion when i387_collect_xsave doesn't recognize the register. amd64_linux_nat_target::store_registers could probably be fixed to handle this case, but I don't think it's worth it, given that it would only be to support very old kernels. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5d438e33d7fc914ba9b6e0d6b019a8966c5fcc [2] https://sourceware.org/git/?p=glibc.git;a=commit;h=c9cf6ddeebb7bb [3] https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=88e4bc32686ebd0b1111a94f93eba2d334241f68 gdb/ChangeLog: * configure.ac: Remove check for fs_base/gs_base in user_regs_struct. * configure: Re-generate. * config.in: Re-generate. * amd64-nat.c (amd64_native_gregset_reg_offset): Adjust. * amd64-linux-nat.c (amd64_linux_nat_target::fetch_registers, amd64_linux_nat_target::store_registers, ps_get_thread_area, ): Adjust. gdbserver/ChangeLog: * configure.ac: Remove check for fs_base/gs_base in user_regs_struct. * configure: Re-generate. * config.in: Re-generate. * linux-x86-low.cc (x86_64_regmap, x86_fill_gregset, x86_store_gregset): Adjust.
2020-04-13Move event-loop configury to common.m4Tom Tromey1-2/+2
gdb_select.h and the event loop require some configure checks, so this moves the needed checks to common.m4 and updates the configure scripts. gdb/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Remove checks that are now in GDB_AC_COMMON. gdbserver/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * configure: Rebuild. * config.in: Rebuild. gdbsupport/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * config.in, configure: Rebuild. * common.m4 (GDB_AC_COMMON): Check for poll.h, sys/poll.h, sys/select.h, and poll.
2020-03-20gdb: remove HAVE_DECL_PTRACESimon Marchi1-20/+0
I stumbled on this snippet in nat/gdb_ptrace.h: /* Some systems, in particular DEC OSF/1, Digital Unix, Compaq Tru64 or whatever it's called these days, don't provide a prototype for ptrace. Provide one to silence compiler warnings. */ #ifndef HAVE_DECL_PTRACE extern PTRACE_TYPE_RET ptrace(); #endif I believe this is unnecessary today and should be removed. First, the comment only mentions OSes we don't support (and to be honest, I had never even heard of). But most importantly, in C++, a declaration with empty parenthesis declares a function that accepts no arguments, unlike in C. So if this declaration was really used, GDB wouldn't build, since all ptrace call sites pass some arguments. Since we haven't heard anything about this causing some build failures since we have transitioned to C++, I conclude that it's not used. This patch removes it as well as the corresponding configure check. gdb/ChangeLog: * ptrace.m4: Don't check for ptrace declaration. * config.in: Re-generate. * configure: Re-generate. * nat/gdb_ptrace.h: Don't declare ptrace if HAVE_DECL_PTRACE is not defined. gdbserver/ChangeLog: * config.in: Re-generate. * configure: Re-generate. gdbsupport/ChangeLog: * config.in: Re-generate. * configure: Re-generate.
2020-03-12Change gdbserver to use existing gdbsupportTom Tromey1-3/+4
This changes the gdbserver build to use the gdbsupport that was built for gdb. gdbserver and gdbreplay now must use WIN32APILIBS (aka -lws2_32). Before this change, gdbserver did not define USE_WIN32API when building gdbsupport, but now this is always done. ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def (gdbserver): Depend on gdbsupport. gdbserver/ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac (GDBSERVER_DEPFILES): Remove srv_selftest_objs. (WIN32APILIBS): New subst. * Makefile.in (SFILES, OBS, TAGS, GDBREPLAY_OBS): Remove gdbsupport files. (gdbsupport/%.o): Remove target. (GDBSUPPORT_BUILDDIR, GDBSUPPORT): New variables. (gdbserver$(EXEEXT), gdbreplay$(EXEEXT)): Add GDBSUPPORT. (WIN32APILIBS): New variable. (gdbserver$(EXEEXT)): Add WIN32APILIBS. (gdbreplay$(EXEEXT)): Likewise.
2020-03-12Fix gdbserver build when intl already builtTom Tromey1-0/+83
gdbserver uses gdb's alloc.c, and this in turn can include headers from intl via gdbsupport/gdb_locale.h. This can cause build failures in some situations, for example if you build gdb and gdbserver on mingw. This patch restores the gdbsupport dependency on intl, and changes gdbserver to use ZW_GNU_GETTEXT_SISTER_DIR. This fixes this build problem. ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def (gdbsupport): Depend on intl. gdbserver/ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * config.in, configure: Rebuild. * configure.ac: Call ZW_GNU_GETTEXT_SISTER_DIR. * acinclude.m4: Include gettext-sister.m4. * Makefile.in (top_builddir, INTL, INTL_DEPS, INTL_CFLAGS): New variables. (INCLUDE_CFLAGS): Add INTL_CFLAGS. (gdbserver$(EXEEXT), gdbreplay$(EXEEXT)): Use INTL_DEPS, INTL.
2020-03-12Move sourcing of development.sh to GDB_AC_COMMONSimon Marchi1-435/+436
The same is done for gdb, gdbserver and gdbsupport. I therefore think it makes sense to move that to GDB_AC_COMMON. It is required to move the call to GDB_AC_COMMON so it is before GDB_AC_SELFTEST in gdbserver/configure.ac, otherwise the $development variable isn't set when the code behind GDB_AC_SELFTEST executes. gdb/ChangeLog: * configure.ac: Don't source bfd/development.sh. * selftest.m4: Modify comment. * configure: Re-generate. gdbserver/ChangeLog: * configure.ac: Don't source bfd/development.sh, move GDB_AC_COMMON higher. * configure: Re-generate. gdbsupport/ChangeLog: * configure.ac: Don't source bfd/development.sh. * common.m4: Source bfd/development.sh. * configure: Re-generate.
2020-03-12gdb/selftest.m4: ensure $development is setSimon Marchi1-0/+5
Before commit 3d1e5a43cbe ("gdbsupport/configure.ac: source development.sh"), the GDB build in non-development mode (turn development to false in bfd/development.sh if you want to try) was broken because the gdbsupport configure script didn't source bfd/development.sh to set the development variable. Since the GDB_AC_SELFTEST macro relies on the `development` variable, I propose to modify it such that it errors out if $development does not have an expected value of "true" or "false". This could prevent a future similar problem from happening while refactoring the configure scripts. It would have caught the problem fixed by the patch mentioned earlier. gdb/ChangeLog: * selftest.m4 (GDB_AC_SELFTEST): Error out if $development is not "true" or "false". * configure: Re-generate. gdbserver/ChangeLog: * configure: Re-generate. gdbsupport/ChangeLog: * configure: Re-generate.
2020-03-11gdb: enable -Wmissing-prototypes warningSimon Marchi1-0/+1
While compiling with clang, I noticed it didn't catch cases where my function declaration didn't match my function definition. This is normally caught by gcc with -Wmissing-declarations. On clang, this is caught by -Wmissing-prototypes instead. Note that on gcc, -Wmissing-prototypes also exists, but is only valid for C and Objective-C. It gets correctly rejected by the configure script since gcc rejects it with: cc1plus: error: command line option '-Wmissing-prototypes' is valid for C/ObjC but not for C++ -Werror So this warning flag ends up not used for gcc (which is what we want). gdb/ChangeLog: * configure: Re-generate. gdbserver/ChangeLog: * configure: Re-generate. gdbsupport/ChangeLog: * configure: Re-generate. * warning.m4: Enable -Wmissing-prototypes.
2020-02-19Merge changes from GCC for the config/ directoryAndrew Burgess1-6/+23
GCC's config/ChangeLog since the last time this merge was done (in the binutils-gdb commit 0b4d000cc4e8e77c823) is included at the end of this commit message. It is worth noting that the binutils-gdb commit 301a9420d947da1458 added the file config/debuginfod.m4 which is not present in GCC's config/ directory. This file is preserved, unmodified, after this commit. In order to regenerate all of the configure files, I configured with --enable-maintainer-mode, and built the 'all' target. I then did the same thing on a source tree without this patch, and only committed those files that changed when this patch was added. GCC's config/ChangeLog entries: 2020-02-12 Sandra Loosemore <sandra@codesourcery.com> PR libstdc++/79193 PR libstdc++/88999 * no-executables.m4: Use a non-empty program to test for linker support. 2020-02-01 Andrew Burgess <andrew.burgess@embecosm.com> * lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Update shell syntax. 2020-01-27 Andrew Burgess <andrew.burgess@embecosm.com> * lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Add new --with-libXXX-type=... option. Use this to guide the selection of either a shared library or a static library. 2020-01-24 Maciej W. Rozycki <macro@wdc.com> * toolexeclibdir.m4: New file. 2019-09-10 Christophe Lyon <christophe.lyon@st.com> * futex.m4: Handle *-uclinux*. * tls.m4 (GCC_CHECK_TLS): Likewise. 2019-09-06 Florian Weimer <fweimer@redhat.com> * futex.m4 (GCC_LINUX_FUTEX): Include <unistd.h> for the syscall function. 2019-07-08 Richard Sandiford <richard.sandiford@arm.com> * bootstrap-Og.mk: New file. 2019-06-25 Kwok Cheung Yeung <kcy@codesourcery.com> Andrew Stubbs <ams@codesourcery.com> * gthr.m4 (GCC_AC_THREAD_HEADER): Add case for gcn. 2019-05-30 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> * ax_count_cpus.m4: New file. 2019-05-02 Richard Biener <rguenther@suse.de> PR bootstrap/85574 * bootstrap-lto.mk (extra-compare): Set to gcc/lto1$(exeext). 2019-04-16 Martin Liska <mliska@suse.cz> * bootstrap-lto-lean.mk: Filter out -flto in STAGEtrain_CFLAGS. 2019-04-09 Martin Liska <mliska@suse.cz> * bootstrap-lto-lean.mk: New file. 2019-03-02 Johannes Pfau <johannespfau@gmail.com> * mh-mingw: Also set __USE_MINGW_ACCESS flag for C++ code. 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * math.m4, tls.m4: Use AC_LANG_SOURCE. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. config/ChangeLog: * ax_count_cpus.m4: New file, backported from GCC. * bootstrap-Og.mk: New file, backported from GCC. * bootstrap-lto-lean.mk: New file, backported from GCC. * bootstrap-lto.mk: Changes backported from GCC. * futex.m4: Changes backported from GCC. * gthr.m4: Changes backported from GCC. * lib-link.m4: Changes backported from GCC. * mh-mingw: Changes backported from GCC. * no-executables.m4: Changes backported from GCC. * tls.m4: Changes backported from GCC. * toolexeclibdir.m4: New file, backported from GCC. binutils/ChangeLog: * configure: Regenerate. gdb/ChangeLog: * configure: Regenerate. gdbserver/ChangeLog: * configure: Regenerate. gdbsupport/ChangeLog: * configure: Regenerate. intl/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate. zlib/ChangeLog.bin-gdb: * configure: Regenerate.
2020-02-14Change gdbserver to use existing gnulib and libibertyTom Tromey1-218/+1
This changes gdbserver so that it no longer builds its own gnulib and libiberty. Instead, it now relies on the ones that were already built at the top level. gdbsupport is still built specially for gdbserver. This is more complicated and will be tackled in a subsequent patch. ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def: Make gdbserver require gnulib and libiberty. gdbserver/ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * acinclude.m4: Don't include acx_configure_dir.m4. * Makefile.in (LIBIBERTY_BUILDDIR, GNULIB_BUILDDIR): Update. (SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): Remove. (all, install-only, uninstall, clean-info, clean) (maintainer-clean): Don't recurse. (subdir_do, all-lib): Remove. ($(LIBGNU) $(LIBIBERTY) $(GNULIB_H)): Remove rule. (GNULIB_H): Remove. (generated_files): Update. ($(GNULIB_BUILDDIR)/Makefile): Remove rule. * configure: Rebuild. * configure.ac: Don't configure gnulib or libiberty. (GNULIB): Update. gdbsupport/ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * common-defs.h: Change path to gnulib/config.h. Change-Id: I469cbbf5db2ab37109c058e9e3a1e4f4dabdfc98
2020-02-13gdbserver: rename source files to .ccSimon Marchi1-1/+1
For the same reasons outlined in the previous patch, this patch renames gdbserver source files to .cc. I have moved the "-x c++" switch to only those rules that require it. gdbserver/ChangeLog: * Makefile.in: Rename source files from .c to .cc. * %.c: Rename to %.cc. * configure.ac: Rename server.c to server.cc. * configure: Re-generate.
2020-02-11Re-generate gdb/gdbserver/gdbsupport configure scriptsSimon Marchi1-1/+2
In my previous commit, I did a last minute modification of warning.m4, but forgot to re-generate the configure scripts, this commit fixes that. gdb/ChangeLog: * configure: Re-generate. gdbserver/ChangeLog: * configure: Re-generate. gdbsupport/ChangeLog: * configure: Re-generate.
2020-02-11Add -Wstrict-null-sentinel to gdbsupport/warning.m4Simon Marchi1-1/+2
Commit 85f0dd3ce ("[gdb] Fix -Wstrict-null-sentinel warnings") fixed some violations of -Wstrict-null-sentinel. If we want to enforce this warning, I think we should enable it in our warning.m4 file. gdbsupport/ChangeLog: * warning.m4: Add -Wstrict-null-sentinel. * configure: Re-generate. gdbserver/ChangeLog: * configure: Re-generate. gdb/ChangeLog: * configure: Re-generate.
2020-02-07Move gdbserver to top levelTom Tromey1-0/+12159
This patch moves gdbserver to the top level. This patch is as close to a pure move as possible -- gdbserver still builds its own variant of gnulib and gdbsupport. Changing this will be done in a separate patch. [v2] Note that, per Simon's review comment, this patch changes the tree so that gdbserver is not built for or1k or score. This makes sense, because there is apparently not actually a gdbserver port here. [v3] This version of the patch also splits out some configury into a new file, gdbserver/configure.host, so that the top-level configure script can simply rely on it in order to decide whether gdbserver should be built. [v4] This version adds documentation and removes some unnecessary top-level dependencies. [v5] Update docs to mention "make all-gdbserver" and change how top-level configure decides whether to build gdbserver, switching to a single, shared script. Tested by the buildbot. ChangeLog 2020-02-07 Tom Tromey <tom@tromey.com> Pedro Alves <palves@redhat.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver. * gdbserver: New directory, moved from gdb/gdbserver. * configure.ac (host_tools): Add gdbserver. Only build gdbserver on certain systems. * Makefile.in, configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gdbserver. * MAINTAINERS: Add gdbserver. gdb/ChangeLog 2020-02-07 Tom Tromey <tom@tromey.com> * README: Update gdbserver documentation. * gdbserver: Move to top level. * configure.tgt (build_gdbserver): Remove. * configure.ac: Remove --enable-gdbserver. * configure: Rebuild. * Makefile.in (distclean): Don't mention gdbserver. Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e
generated by cgit v1.1 at 2024-11-19 23:20:12 +0000