aboutsummaryrefslogtreecommitdiff
path: root/gdbserver/configure.ac
AgeCommit message (Collapse)AuthorFilesLines
2022-01-13gdb: don't use -Wmissing-prototypes with g++Andrew Burgess1-0/+1
This commit aims to not make use of -Wmissing-prototypes when compiling with g++. Use of -Wmissing-prototypes was added with this commit: commit a0761e34f054767de6d6389929d27e9015fb299b Date: Wed Mar 11 15:15:12 2020 -0400 gdb: enable -Wmissing-prototypes warning Because clang can provide helpful warnings with this flag. Unfortunately, g++ doesn't accept this flag, and will give this warning: cc1plus: warning: command line option ‘-Wmissing-prototypes’ is valid for C/ObjC but not for C++ In theory the fact that this flag is not supported should be detected by the configure check in gdbsupport/warning.m4, but for users of ccache, this check doesn't work due to a long standing ccache issue: https://github.com/ccache/ccache/issues/738 The ccache problem is that -W... options are reordered on the command line, and so -Wmissing-prototypes is seen before -Werror. Usually this doesn't matter, but the above warning (about the flag not being valid) is issued before the -Werror flag is processed, and so is not fatal. There have been two previous attempts to fix this that I'm aware of. The first is: https://sourceware.org/pipermail/gdb-patches/2021-September/182148.html In this attempt, instead of just relying on a compile to check if a flag is valid, the proposal was to both compile and link. As linking doesn't go through ccache, we don't suffer from the argument reordering problem, and the link phase will correctly fail when using -Wmissing-prototypes with g++. The configure script will then disable the use of this flag. This approach was rejected, and the suggestion was to only add the -Wmissing-prototypes flag if we are compiling with gcc. The second attempt, attempts this approach, and can be found here: https://sourceware.org/pipermail/gdb-patches/2021-November/183076.html This attempt only adds the -Wmissing-prototypes flag is the value of GCC is not 'yes'. This feels like it is doing the right thing, unfortunately, the GCC flag is really a 'is gcc like' flag, not a strict, is gcc check. As such, GCC is set to 'yes' for clang, which would mean the flag was not included for clang or gcc. The entire point of the original commit was to add this flag for clang, so clearly the second attempt is not sufficient either. In this new attempt I have added gdbsupport/compiler-type.m4, this file defines AM_GDB_COMPILER_TYPE. This macro sets the variable GDB_COMPILER_TYPE to either 'gcc', 'clang', or 'unknown'. In future the list of values might be extended to cover other compilers, if this is ever useful. I've then modified gdbsupport/warning.m4 to only add the problematic -Wmissing-prototypes flag if GDB_COMPILER_TYPE is not 'gcc'. I've tested this with both gcc and clang and see the expected results, gcc no longer attempts to use the -Wmissing-prototypes flag, while clang continues to use it. When compiling using ccache, I am no longer seeing the warning.
2022-01-01Automatic Copyright Year update after running gdb/copyright.pyJoel Brobecker1-1/+1
This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script.
2021-06-19gdb/gdbserver: switch to AC_CONFIG_MACRO_DIRSMike Frysinger1-0/+1
These dirs don't use automake, so use AC_CONFIG_MACRO_DIRS to specify ../config as a search dir for m4 macros. This allows removal of a lot of hand-written m4_include's from acinclude.m4 files, and simplifies use of `aclocal` or `autoreconf` as manual -I is not needed.
2021-04-13Remove process_stratum_target::hostio_last_error abstractionPedro Alves1-1/+1
Now that the WinCE port is gone, all ports map host I/O errors from errno, so this abstraction is no longer necessary. Basically undoes: https://sourceware.org/pipermail/gdb-patches/2008-January/055511.html https://sourceware.org/pipermail/gdb-patches/attachments/20080131/f44e7012/attachment.bin gdbserver/ChangeLog: * Makefile.in (SFILES): Remove hostio-errno.cc. * configure: Regenerate. * configure.ac (GDBSERVER_DEPFILES): No longer add $srv_hostio_err_objs. * configure.srv (srv_hostio_err_objs): Delete. * hostio-errno.cc: Delete. * hostio.cc (hostio_error): Inline hostio_last_error_from_errno here. * hostio.h (hostio_last_error_from_errno): Delete. * target.cc (process_stratum_target::hostio_last_error): Delete. * target.h (class process_stratum_target) <hostio_last_error>: Delete.
2021-01-01Update copyright year range in all GDB filesJoel Brobecker1-1/+1
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2020-10-31gdbserver: modernize configure.acSimon Marchi1-34/+65
Run autoupdate on gdbserver/configure.ac and then tweak it to use easier to read indentation. This removes a few warnings when running `autoreconf -vf -Wall`. * Replace AC_INIT with AC_INIT and no arguments plus AC_CONFIG_SRCDIR. * Replace AC_GNU_SOURCE with AC_USE_SYSTEM_EXTENSIONS. * Replace AC_TRY_COMPILE with AC_COMPILE_IFELSE. * Replace AC_TRY_LINK with AC_LINK_IFELSE. autoupdate gets it right, except this one here: --- a/gdbserver/configure.ac +++ b/gdbserver/configure.ac @@ -304,7 +304,7 @@ if test "$srv_linux_thread_db" = "yes"; then AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[]])],[found="-Wl,--dynamic-list" RDYNAMIC='-Wl,--dynamic-list=$(srcdir)/proc-service.list'],[RDYNAMIC="-rdynamic" LDFLAGS="$old_LDFLAGS $RDYNAMIC" - AC_TRY_LINK([], [], + _au_m4_changequote([,])AC_TRY_LINK([], [], [found="-rdynamic"], [found="no" RDYNAMIC=""])]) ... which I had to convert manually. The changes in the generated configure file only contain insignificant whitespace changes, so that gives confidence that the conversion is correct. gdbserver/ChangeLog: * configure.ac: Modernize. * configure: Re-generate. Change-Id: Ia769aaec2aafac595504f477da955e91dffa4d8f
2020-10-31gdb, gdbserver, gdbsupport: use AC_CANONICAL_{BUILD,HOST,TARGET} instead of ↵Simon Marchi1-1/+8
AC_CANONICAL_SYSTEM `autoreconf -Wall` notes that AC_CANONICAL_SYSTEM is obsolete: configure.ac:36: warning: The macro `AC_CANONICAL_SYSTEM' is obsolete. Replace it by AC_CANONICAL_BUILD, AC_CANONICAL_HOST and AC_CANONICAL_TARGET in configure.ac files in gdb, gdbserver and gdbsupport. All three macros may not be needed everywhere, but it is hard to completely audit the configure files to see which are required, so I think it's better (and that there's no downside) to just call all three. gdb/ChangeLog: * configure.ac: Use AC_CANONICAL_{BUILD,HOST,TARGET} instead of AC_CANONICAL_SYSTEM. * configure: Re-generate. gdbserver/ChangeLog: * configure.ac: Use AC_CANONICAL_{BUILD,HOST,TARGET} instead of AC_CANONICAL_SYSTEM. * configure: Re-generate. gdbsupport/ChangeLog: * configure.ac: Use AC_CANONICAL_{BUILD,HOST,TARGET} instead of AC_CANONICAL_SYSTEM. * configure: Re-generate. Change-Id: Ifd0e21f1e478634e768b5de1b8ee06a7f690d863
2020-07-26Don't unnecessarily redefine 'socklen_t' type in MinGW builds.Eli Zaretskii1-2/+6
The original configure-time tests in gdb/ and gdbserver/ failed to detect that 'socklen_t' is defined in MinGW headers because the test program included only sys/socket.h, which is absent in MinGW system headers. However on MS-Windows this data type is declared in another header, ws2tcpip.h. The modified test programs try using ws2tcpip.h if sys/socket.h is unavailable. Thanks to Joel Brobecker who helped me regenerate the configure scripts and the config.in files. gdb/ChangeLog: 2020-07-26 Eli Zaretskii <eliz@gnu.org> * configure.ac (AC_CHECK_HEADERS): Check for sys/socket.h and ws2tcpip.h. When checking whether socklen_t type is defined, use ws2tcpip.h if it is available and sys/socket.h isn't. * configure: Regenerate. * config.in: Regenerate. gdbserver/ChangeLog: 2020-07-26 Eli Zaretskii <eliz@gnu.org> * configure.ac (AC_CHECK_HEADERS): Add ws2tcpip.h. When checking whether socklen_t type is defined, use ws2tcpip.h if it is available and sys/socket.h isn't. * configure: Regenerate. * config.in: Regenerate.
2020-06-12gdbserver: remove support for NeutrinoSimon Marchi1-2/+0
This port has been unmaintained for years, remove it. gdbserver/ChangeLog: * configure: Re-generate. * configure.ac: Remove srv_qnx test. * configure.srv: Remove nto case. * nto-low.cc, nto-low.h, nto-x86-low.cc: Remove. * remote-utils.c: Remove __QNX__-guarded code. Change-Id: I8a1ad9c740a69352da1f6993778dbf951eebb22f
2020-06-12gdbserver: remove support for LynxOSSimon Marchi1-2/+0
This port has been unmaintained for years, remove it. gdbserver/ChangeLog: * configure: Re-generate. * configure.ac: Remove srv_lynxos test. * configure.srv: Remove lynxos cases. * lynx-i386-low.cc, lynx-low.cc, lynx-low.h, lynx-ppc-low.c: Remove. Change-Id: I239d1cf1fc7b4c7a174251bc7981707eaba7d972
2020-04-27gdb, gdbserver: remove configure check for fs_base/gs_base in user_regs_structSimon Marchi1-8/+0
I recently stumbled on this code mentioning Linux kernel 2.6.25, and thought it could be time for some spring cleaning (newer GDBs probably don't need to supports 12-year old kernels). I then found that the "legacy" case is probably broken anyway, which gives an even better motivation for its removal. In short, this patch removes the configure checks that check if user_regs_struct contains the fs_base/gs_base fields and adjusts all uses of the HAVE_STRUCT_USER_REGS_STRUCT_{FS,GS}_BASE macros. The longer explanation/rationale follows. Apparently, Linux kernels since 2.6.25 (that's from 2008) have been reliably providing fs_base and gs_base as part of user_regs_struct. Commit df5d438e33d7 in the Linux kernel [1] seems related. This means that we can get these values by reading registers with PTRACE_GETREGS. Previously, these values were obtained using a separate PTRACE_ARCH_PRCTL ptrace call. First, I'm not even sure the configure check was really right in the first place. The user_regs_struct used by GDB comes from /usr/include/x86_64-linux-gnu/sys/user.h (or equivalent on other distros) and is provided by glibc. glibc has had the fs_base/gs_base fields in there for a very long time, at least since this commit from 2001 [2]. The Linux kernel also has its version of user_regs_struct, which I think was exported to user-space at some point. It included the fs_base/gs_base fields since at least this 2002 commit [3]. In any case, my conclusion is that the fields were there long before the aforementioned Linux kernel commit. The kernel commit didn't add these fields, it only made sure that they have reliable values when obtained with PTRACE_GETREGS. So, checking for the presence of the fs_base/gs_base fields in struct user_regs_struct doesn't sound like a good way of knowing if we can reliably get the fs_base/gs_base values from PTRACE_GETREGS. My guess is that if we were using that strategy on a < 2.6.25 kernel, things would not work correctly: - configure would find that the user_regs_struct has the fs_base/gs_base fields (which are probided by glibc anyway) - we would be reading the fs_base/gs_base values using PTRACE_GETREGS, for which the kernel would provide unreliable values Second, I have tried to see how things worked by forcing GDB to not use fs_base/gs_base from PTRACE_GETREGS (forcing it to use the "legacy" code, by configuring with ac_cv_member_struct_user_regs_struct_gs_base=no ac_cv_member_struct_user_regs_struct_fs_base=no Doing so breaks writing registers back to the inferior. For example, calling an inferior functions gives an internal error: (gdb) p malloc(10) /home/smarchi/src/binutils-gdb/gdb/i387-tdep.c:1408: internal-error: invalid i387 regnum 152 The relevant last frames where this error happens are: #8 0x0000563123d262fc in internal_error (file=0x563123e93fd8 "/home/smarchi/src/binutils-gdb/gdb/i387-tdep.c", line=1408, fmt=0x563123e94482 "invalid i387 regnum %d") at /home/smarchi/src/binutils-gdb/gdbsupport/errors.cc:55 #9 0x0000563123047d0d in i387_collect_xsave (regcache=0x5631269453f0, regnum=152, xsave=0x7ffd38402a20, gcore=0) at /home/smarchi/src/binutils-gdb/gdb/i387-tdep.c:1408 #10 0x0000563122c69e8a in amd64_collect_xsave (regcache=0x5631269453f0, regnum=152, xsave=0x7ffd38402a20, gcore=0) at /home/smarchi/src/binutils-gdb/gdb/amd64-tdep.c:3448 #11 0x0000563122c5e94c in amd64_linux_nat_target::store_registers (this=0x56312515fd10 <the_amd64_linux_nat_target>, regcache=0x5631269453f0, regnum=152) at /home/smarchi/src/binutils-gdb/gdb/amd64-linux-nat.c:335 #12 0x00005631234c8c80 in target_store_registers (regcache=0x5631269453f0, regno=152) at /home/smarchi/src/binutils-gdb/gdb/target.c:3485 #13 0x00005631232e8df7 in regcache::raw_write (this=0x5631269453f0, regnum=152, buf=0x56312759e468 "@\225\372\367\377\177") at /home/smarchi/src/binutils-gdb/gdb/regcache.c:765 #14 0x00005631232e8f0c in regcache::cooked_write (this=0x5631269453f0, regnum=152, buf=0x56312759e468 "@\225\372\367\377\177") at /home/smarchi/src/binutils-gdb/gdb/regcache.c:778 #15 0x00005631232e75ec in regcache::restore (this=0x5631269453f0, src=0x5631275eb130) at /home/smarchi/src/binutils-gdb/gdb/regcache.c:283 #16 0x0000563123083fc4 in infcall_suspend_state::restore (this=0x5631273ed930, gdbarch=0x56312718cf20, tp=0x5631270bca90, regcache=0x5631269453f0) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:9103 #17 0x0000563123081eed in restore_infcall_suspend_state (inf_state=0x5631273ed930) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:9151 The problem seems to be that amd64_linux_nat_target::store_registers calls amd64_native_gregset_supplies_p to know whether gregset provides fs_base. When !HAVE_STRUCT_USER_REGS_STRUCT_FS_BASE, amd64_native_gregset_supplies_p returns false. store_registers therefore assumes that it must be an "xstate" register. This is of course wrong, and that leads to the failed assertion when i387_collect_xsave doesn't recognize the register. amd64_linux_nat_target::store_registers could probably be fixed to handle this case, but I don't think it's worth it, given that it would only be to support very old kernels. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5d438e33d7fc914ba9b6e0d6b019a8966c5fcc [2] https://sourceware.org/git/?p=glibc.git;a=commit;h=c9cf6ddeebb7bb [3] https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=88e4bc32686ebd0b1111a94f93eba2d334241f68 gdb/ChangeLog: * configure.ac: Remove check for fs_base/gs_base in user_regs_struct. * configure: Re-generate. * config.in: Re-generate. * amd64-nat.c (amd64_native_gregset_reg_offset): Adjust. * amd64-linux-nat.c (amd64_linux_nat_target::fetch_registers, amd64_linux_nat_target::store_registers, ps_get_thread_area, ): Adjust. gdbserver/ChangeLog: * configure.ac: Remove check for fs_base/gs_base in user_regs_struct. * configure: Re-generate. * config.in: Re-generate. * linux-x86-low.cc (x86_64_regmap, x86_fill_gregset, x86_store_gregset): Adjust.
2020-03-12Change gdbserver to use existing gdbsupportTom Tromey1-4/+4
This changes the gdbserver build to use the gdbsupport that was built for gdb. gdbserver and gdbreplay now must use WIN32APILIBS (aka -lws2_32). Before this change, gdbserver did not define USE_WIN32API when building gdbsupport, but now this is always done. ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def (gdbserver): Depend on gdbsupport. gdbserver/ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac (GDBSERVER_DEPFILES): Remove srv_selftest_objs. (WIN32APILIBS): New subst. * Makefile.in (SFILES, OBS, TAGS, GDBREPLAY_OBS): Remove gdbsupport files. (gdbsupport/%.o): Remove target. (GDBSUPPORT_BUILDDIR, GDBSUPPORT): New variables. (gdbserver$(EXEEXT), gdbreplay$(EXEEXT)): Add GDBSUPPORT. (WIN32APILIBS): New variable. (gdbserver$(EXEEXT)): Add WIN32APILIBS. (gdbreplay$(EXEEXT)): Likewise.
2020-03-12Fix gdbserver build when intl already builtTom Tromey1-0/+3
gdbserver uses gdb's alloc.c, and this in turn can include headers from intl via gdbsupport/gdb_locale.h. This can cause build failures in some situations, for example if you build gdb and gdbserver on mingw. This patch restores the gdbsupport dependency on intl, and changes gdbserver to use ZW_GNU_GETTEXT_SISTER_DIR. This fixes this build problem. ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def (gdbsupport): Depend on intl. gdbserver/ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * config.in, configure: Rebuild. * configure.ac: Call ZW_GNU_GETTEXT_SISTER_DIR. * acinclude.m4: Include gettext-sister.m4. * Makefile.in (top_builddir, INTL, INTL_DEPS, INTL_CFLAGS): New variables. (INCLUDE_CFLAGS): Add INTL_CFLAGS. (gdbserver$(EXEEXT), gdbreplay$(EXEEXT)): Use INTL_DEPS, INTL.
2020-03-12Move sourcing of development.sh to GDB_AC_COMMONSimon Marchi1-4/+1
The same is done for gdb, gdbserver and gdbsupport. I therefore think it makes sense to move that to GDB_AC_COMMON. It is required to move the call to GDB_AC_COMMON so it is before GDB_AC_SELFTEST in gdbserver/configure.ac, otherwise the $development variable isn't set when the code behind GDB_AC_SELFTEST executes. gdb/ChangeLog: * configure.ac: Don't source bfd/development.sh. * selftest.m4: Modify comment. * configure: Re-generate. gdbserver/ChangeLog: * configure.ac: Don't source bfd/development.sh, move GDB_AC_COMMON higher. * configure: Re-generate. gdbsupport/ChangeLog: * configure.ac: Don't source bfd/development.sh. * common.m4: Source bfd/development.sh. * configure: Re-generate.
2020-02-14Change gdbserver to use existing gnulib and libibertyTom Tromey1-17/+1
This changes gdbserver so that it no longer builds its own gnulib and libiberty. Instead, it now relies on the ones that were already built at the top level. gdbsupport is still built specially for gdbserver. This is more complicated and will be tackled in a subsequent patch. ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def: Make gdbserver require gnulib and libiberty. gdbserver/ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * acinclude.m4: Don't include acx_configure_dir.m4. * Makefile.in (LIBIBERTY_BUILDDIR, GNULIB_BUILDDIR): Update. (SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): Remove. (all, install-only, uninstall, clean-info, clean) (maintainer-clean): Don't recurse. (subdir_do, all-lib): Remove. ($(LIBGNU) $(LIBIBERTY) $(GNULIB_H)): Remove rule. (GNULIB_H): Remove. (generated_files): Update. ($(GNULIB_BUILDDIR)/Makefile): Remove rule. * configure: Rebuild. * configure.ac: Don't configure gnulib or libiberty. (GNULIB): Update. gdbsupport/ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * common-defs.h: Change path to gnulib/config.h. Change-Id: I469cbbf5db2ab37109c058e9e3a1e4f4dabdfc98
2020-02-13gdbserver: rename source files to .ccSimon Marchi1-1/+1
For the same reasons outlined in the previous patch, this patch renames gdbserver source files to .cc. I have moved the "-x c++" switch to only those rules that require it. gdbserver/ChangeLog: * Makefile.in: Rename source files from .c to .cc. * %.c: Rename to %.cc. * configure.ac: Rename server.c to server.cc. * configure: Re-generate.
2020-02-07Move gdbserver to top levelTom Tromey1-0/+445
This patch moves gdbserver to the top level. This patch is as close to a pure move as possible -- gdbserver still builds its own variant of gnulib and gdbsupport. Changing this will be done in a separate patch. [v2] Note that, per Simon's review comment, this patch changes the tree so that gdbserver is not built for or1k or score. This makes sense, because there is apparently not actually a gdbserver port here. [v3] This version of the patch also splits out some configury into a new file, gdbserver/configure.host, so that the top-level configure script can simply rely on it in order to decide whether gdbserver should be built. [v4] This version adds documentation and removes some unnecessary top-level dependencies. [v5] Update docs to mention "make all-gdbserver" and change how top-level configure decides whether to build gdbserver, switching to a single, shared script. Tested by the buildbot. ChangeLog 2020-02-07 Tom Tromey <tom@tromey.com> Pedro Alves <palves@redhat.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver. * gdbserver: New directory, moved from gdb/gdbserver. * configure.ac (host_tools): Add gdbserver. Only build gdbserver on certain systems. * Makefile.in, configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gdbserver. * MAINTAINERS: Add gdbserver. gdb/ChangeLog 2020-02-07 Tom Tromey <tom@tromey.com> * README: Update gdbserver documentation. * gdbserver: Move to top level. * configure.tgt (build_gdbserver): Remove. * configure.ac: Remove --enable-gdbserver. * configure: Rebuild. * Makefile.in (distclean): Don't mention gdbserver. Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e
generated by cgit v1.1 at 2024-11-19 22:14:39 +0000