aboutsummaryrefslogtreecommitdiff
path: root/gdb
AgeCommit message (Collapse)AuthorFilesLines
2013-08-072013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>Ulrich Weigand6-4/+34
Ulrich Weigand <uweigand@de.ibm.com> * gdb_ptrace.h: Use ptrace64 instead of ptrace if HAVE_PTRACE64 is defined. * rs6000-nat.c: Check for __ld_info64_ if compiling 64 BIT gdb. (rs6000_ptrace32): Call ptrace64 instead of ptrace if present. (rs6000_ptrace64): Call ptace64 instead of ptracex if present. * configure.ac: Check for ptrace64. * configure, config.in: Regenerate.
2013-08-072013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>Ulrich Weigand2-20/+49
Ulrich Weigand <uweigand@de.ibm.com> * aixthread.c: Call ptrace64 instead of ptracex if defined. Call ptrace64 instead of ptrace if defined. Add macro addr_ptr to take care of ptrace address argument. (pdc_read_regs): Likewise. (pdc_write_regs): Likewise. (aix_thread_resume): Likewise. (fetch_regs_kernel_thread): Likewise. (store_regs_kernel_thread): Likewise.
2013-08-072013-08-07 Anton Blanchard <anton@samba.org>Anton Blanchard2-0/+5
* MAINTAINERS: Add myself to Write After Approval.
2013-08-05more add_target removalsTom Tromey7-6/+21
This removes a few more erroneous calls to add_target. These calls end up installing the target in a user-visible way; but these targets are all auto-activated and, I think, should never be explicitly requested. I have no way to test these. * aix-thread.c (_initialize_aix_thread): Use complete_target_initialization. * bsd-uthread.c (_initialize_bsd_uthread): Use complete_target_initialization. * dec-thread.c (_initialize_dec_thread): Use complete_target_initialization. * ravenscar-thread.c (_initialize_ravenscar): Use complete_target_initialization. * sol-thread.c (_initialize_sol_thread): Use complete_target_initialization. * spu-multiarch.c (_initialize_spu_multiarch): Use complete_target_initialization.
2013-08-05remove msymbol_objfileTom Tromey20-132/+180
This is another patch in my ongoing series to "split" objfile to share more read-only data across inferiors. See http://sourceware.org/gdb/wiki/ObjfileSplitting When symbols are finally shared, there will be no back-link from the symbol to its containing objfile, because there may be more than one such objfile. So, all such back-links must be removed. One hidden back-link is the msymbol_objfile function. Since (eventually) a symbol may appear in more than one objfile, trying to look up the objfile given just a symbol cannot work. This patch removes msymbol_objfile in favor of using a bound minimal symbol. It introduces a new function to make this conversion simpler in some spots. The bonus of this patch is that using msymbol_objfile is slower than simply looking up the owning objfile in the first place. Built and regtested on x86-64 Fedora 18. * ada-exp.y (write_var_or_type): Use bound_minimal_symbol. * ada-lang.c (ada_lookup_simple_minsym): Return bound_minimal_symbol. * ada-lang.h (ada_lookup_simple_minsym): Update. * c-exp.y (variable): Use lookup_bound_minimal_symbol. * f-exp.y (variable): Use lookup_bound_minimal_symbol. * go-exp.y (variable): Use lookup_bound_minimal_symbol. * jv-exp.y (push_expression_name): Use lookup_bound_minimal_symbol. * m2-exp.y (variable): Use lookup_bound_minimal_symbol. * minsyms.c (msymbol_objfile): Remove. (lookup_minimal_symbol_internal): New function, from lookup_minimal_symbol. (lookup_minimal_symbol): Rewrite using lookup_minimal_symbol_internal. (lookup_bound_minimal_symbol): New function. * minsyms.h (msymbol_objfile): Remove. (lookup_bound_minimal_symbol): Declare. * p-exp.y (variable): Use lookup_bound_minimal_symbol. * parse.c (write_exp_msymbol): Change parameter to a bound_minimal_symbol. (write_dollar_variable): Use lookup_bound_minimal_symbol. * parser-defs.h (write_exp_msymbol): Update. * printcmd.c (address_info): Use lookup_bound_minimal_symbol. * symfile.c (simple_read_overlay_table): Use lookup_bound_minimal_symbol. * symtab.c (skip_prologue_sal): Don't use msymbol_objfile. (search_symbols): Likewise. (print_msymbol_info): Take a bound_minimal_symbol argument. (symtab_symbol_info, rbreak_command): Update. * symtab.h (struct symbol_search) <msymbol>: Change type to bound_minimal_symbol. * valops.c (find_function_in_inferior): Use lookup_bound_minimal_symbol. * value.c (value_fn_field): Use lookup_bound_minimal_symbol.
2013-08-05doc: gdbserver allows for subsequent and not for multiple simultaneous ↵Sanimir Agovic1-1/+1
connections. doc/ 2013-08-05 Sanimir Agovic <sanimir.agovic@intel.com> * gdb.texinfo (TCP port allocation lifecycle): Gdbserver by default allows for subsequent and not for additional (multiple simultaneous) connections.
2013-08-05gdb/Jan Kratochvil2-32/+62
Code cleanup. * remote.c (cleanup_sigint_signal_handler): Rename the declaration to ... (async_cleanup_sigint_signal_handler): ... this. (initialize_sigint_signal_handler): Remove declaration. (handle_remote_sigint): Rename the declaration to ... (async_handle_remote_sigint): ... this. (handle_remote_sigint_twice): Rename the declaration to ... (async_handle_remote_sigint_twice): ... this. (async_remote_interrupt, async_remote_interrupt_twice) (remote_interrupt): Remove the declarations. (remote_interrupt_twice): Rename the declaration ... (sync_remote_interrupt_twice): ... this. (sigint_remote_twice_token): Rename the variable to ... (async_sigint_remote_twice_token): ... this. (sigint_remote_token): Rename the variable to ... (async_sigint_remote_token): ... this. (initialize_sigint_signal_handler): Rename the function to ... (async_initialize_sigint_signal_handler): ... this. Update the name inside. (handle_remote_sigint): Rename the function to ... (async_handle_remote_sigint): ... this. Update the names inside. (handle_remote_sigint_twice): Rename the function to ... (async_handle_remote_sigint_twice): ... this. Update the names inside. (cleanup_sigint_signal_handler): Rename the function to ... (async_cleanup_sigint_signal_handler): ... this. (remote_interrupt): Rename the function to ... (sync_remote_interrupt): this. Update the names inside. (remote_interrupt_twice): Rename the function to ... (sync_remote_interrupt_twice): this. Update the names inside. (remote_terminal_inferior, remote_terminal_ours, remote_wait_as) (_initialize_remote): Update the names inside.
2013-08-02fix PR symtab/15719Tom Tromey8-13/+44
This patch fixes PR symtab/15719. The bug is that "watch -location" crashes on a certain expression. The problem is that fetch_subexp_value is catching an exception. For ordinary watchpoints this is ok; but for location watchpoints, it is better for the exception to propagate. Built and regtested on x86-64 Fedora 18. New test case included. PR symtab/15719: * breakpoint.c (update_watchpoint, watchpoint_check) (watch_command_1): Update. * eval.c (fetch_subexp_value): Add "preserve_errors" parameter. * ppc-linux-nat.c (check_condition): Update. * value.h (fetch_subexp_value): Update. * gdb.base/watchpoint.c (struct foo5): New. (nullptr): New global. * gdb.base/watchpoint.exp (test_watch_location): Add test.
2013-08-02Remove duplicate call to add_file_handler.Andrew Burgess2-1/+5
http://sourceware.org/ml/gdb-patches/2013-08/msg00067.html This call to add_file_handler is a duplicate of one that is in gdb_setup_readline that is always executed. gdb/ChangeLog * mi/mi-interp.c (mi_interpreter_resume): Remove call to add_file_handler.
2013-08-02 PR symtab/15691Doug Evans7-14/+176
* dwarf2read.c (struct dwarf2_per_cu_data): New member tu_read. (fill_in_sig_entry_from_dwo_entry): Reorganize asserts. Add assert of sig_entry->dwo_unit == NULL. (lookup_dwo_signatured_type): Don't assign TU to a DWO if the TU had already been read. (read_signatured_type): Set per_cu.tu_read. testsuite/ * gdb.dwarf2/fission-mix.exp: New file. * gdb.dwarf2/fission-mix.h: New file. * gdb.dwarf2/fission-mix.c: New file. * gdb.dwarf2/fission-mix2.c: New file.
2013-08-01 PR symtab/15695Doug Evans5-2/+72
* valops.c (value_struct_elt): Add missing call to check_typedef. (value_find_oload_method_list): Ditto. testsuite/ * gdb.base/func-ptr.exp: New file. * gdb.base/func-ptr.c: New file.
2013-08-01 * symtab.c (do_free_search_symbols_cleanup): Change arg to,Doug Evans3-61/+100
effectively, struct symbol_search **. (make_cleanup_free_search_symbols): Change arg to struct symbol_search **. All callers updated. (compare_search_syms): Compare symtab file name and block as well. (search_symbols_equal): New function. (sort_search_symbols_remove_dups): Renamed from sort_search_symbols. New args new_head, new_tail. Result is now void. Remove dups after sorting the symbols. (search_symbols): Sort all found symbols once, after all have been found, and remove duplicates. Simplify cleanup tracking of result. * symtab.h (make_cleanup_free_search_symbols): Update prototype.
2013-08-01 Further workarounds for binutils/15021.Doug Evans4-49/+88
* dwarf2read.c (recursively_compute_inclusions): Change type of result parameter to VEC (symtab_ptr) **. New parameter all_type_symtabs. Watch for duplicate symtabs coming from type units. (compute_symtab_includes): Update call to recursively_compute_inclusions. Build vector of included symtabs instead of per_cus. * symtab.h (symtab_ptr): New typedef. (DEF_VEC_P (symtab_ptr)): New VEC type. * linespec.c (symtab_p): Delete. All uses updated to use symtab_ptr instead.
2013-08-01Remove error_pre_print and quit_pre_print.Andrew Burgess5-23/+9
http://sourceware.org/ml/gdb-patches/2013-07/msg00844.html gdb/ChangeLog * cli/cli-script.c (script_from_file): Remove use of error_pre_print. * main.c (captured_main): Remove use of error_pre_print and quit_pre_print. * utils.c (error_pre_print, quit_pre_print): Remove. * utils.h (error_pre_print, quit_pre_print): Likewise.
2013-08-01gdb/Yao Qi2-10/+75
* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Parse argv with mi_getopt. (mi_cmd_stack_list_variables): Likewise.
2013-08-01gdb/testsuite/Yao Qi3-0/+110
* gdb.python/py-sync-interp.c: New. * gdb.python/py-sync-interp.exp: New.
2013-07-31Remove deprecated_throw_reason.Andrew Burgess3-27/+5
http://sourceware.org/ml/gdb-patches/2013-07/msg00779.html gdb/ChangeLog * exceptions.c (deprecated_throw_reason): Remove. * exceptions.h (deprecated_throw_reason): Remove.
2013-07-31Remove deprecated_throw_reason from mips_error.Andrew Burgess2-9/+14
http://sourceware.org/ml/gdb-patches/2013-07/msg00777.html gdb/ChangeLog * remote-mips.c (mips_error): Replace use of deprecated_throw_reason with throw_verror. Use the error message passed to mips_error as the error message for throw_verror.
2013-07-31Replace most uses of deprecated_throw_reason with quit.Andrew Burgess6-7/+15
http://sourceware.org/ml/gdb-patches/2013-07/msg00778.html gdb/ChangeLog * monitor.c (monitor_interrupt_query): Replace use of deprecated_throw_reason with quit. * nto-procfs.c (interrupt_query): Likewise. * remote-fileio.c (remote_fileio_sig_exit): Likewise. * remote-mips.c (mips_kill): Likewise. * remote.c (interrupt_query): Likewise.
2013-07-31Remove deprecated_throw_reason from internal_verror.Andrew Burgess2-1/+6
http://sourceware.org/ml/gdb-patches/2013-07/msg00776.html gdb/ChangeLog * utils.c (internal_verror): Replace use of deprecated_throw_reason with call to fatal.
2013-07-31gdb/Yao Qi4-0/+47
* tracepoint.c (trace_dump_command): Select the current frame. gdb/testsuite/ * gdb.trace/backtrace.exp (gdb_backtrace_tdp_4): Test command 'tdump' on stack frame 0 and 1 respectively.
2013-07-31gdb/testsuite/Yao Qi2-20/+29
PR gdb/13443 * gdb.trace/backtrace.exp (gdb_backtrace_tdp_3): Add parameter 'traceframe'. Wrap test with with_test_prefix. (top level): Update.
2013-07-31gdb/testsuite/Yao Qi2-13/+19
* gdb.trace/backtrace.exp: Don't invoke 'get_exit' and 'gdb_start'. Invoke 'prepare_for_testing' instead of 'gdb_compile'. Use gdb_test_no_output to issue commands 'tstart' and 'tstop'.
2013-07-31 * dwarf2read.c (process_queue): Add type signature to debug output.Doug Evans2-11/+17
2013-07-30Don't raise an error for optimized out sub-fields.Andrew Burgess4-5/+16
http://sourceware.org/ml/gdb-patches/2013-07/msg00317.html gdb/ChangeLog * value.c (value_fetch_lazy): Mark optimized out values as such rather than raising an error. gdb/testsuite/ChangeLog * gdb.dwarf2/pieces-optimized-out.exp: Expect "<optimized out>" when printing an optimized out value. Expect an error when using an optimized out value in an expression.
2013-07-30value_fetch_lazy, ensure parent is not lazy and check parent for validity.Andrew Burgess6-1/+660
http://sourceware.org/ml/gdb-patches/2013-07/msg00316.html gdb/ChangeLog * value.c (value_fetch_lazy): Ensure parent value is not lazy before checking which bits of the parent, not the child, value are valid. gdb/testsuite/ChangeLog * gdb.dwarf2/pieces-optimized-out.exp: New file. * gdb.dwarf2/pieces-optimized-out.c: New file. * gdb.dwarf2/pieces-optimized-out.S: New file.
2013-07-302013-07-30 Muhammad Bilal <mbilal@codesorcery.com>Muhammad Bilal4-3/+56
PR gdb/15715 * top.c: Include "filenames.h". (set_history_filename): New function. (init_main): Install it as set hook of the "set history filename" command. 2013-07-30 Muhammad Bilal <mbilal@codesourcery.com> PR gdb/15715 * gdb.base/setshow.exp: Test that relative paths passed to 'set history filename' are converted to absolute paths.
2013-07-30cleanup: constify "struct attribute" function parameterSanimir Agovic2-25/+43
gdb/ 2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com> * dwarf2read.c (dwarf2_get_ref_die_offset): Constify struct attribute parameter. (dwarf2_const_value_data): Constify struct attribute parameter. (dwarf2_const_value): Constify struct attribute parameter. (dwarf2_const_value_attr): Constify struct attribute parameter. (lookup_die_type): Constify struct attribute parameter. (dwarf2_get_attr_constant_value): Constify struct attribute parameter. (follow_die_ref_or_sig): Constify struct attribute parameter. (follow_die_ref): Constify struct attribute parameter. (follow_die_sig): Constify struct attribute parameter. (get_DW_AT_signature_type): Constify struct attribute parameter. (get_type_unit_group): Constify struct attribute parameter. (fill_in_loclist_baton): Constify struct attribute parameter. (dwarf2_symbol_mark_computed): Constify struct attribute parameter. (type_unit_group): Constify struct attribute parameter.
2013-07-30cleanup: constify argument passed to dwarf form predicatesSanimir Agovic2-8/+15
2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com> gdb/ * dwarf2read.c (attr_form_is_block): Make argument const. (attr_form_is_section_offset): Make argument const. (attr_form_is_constant): Make argument const. (attr_form_is_ref): Make argument const.
2013-07-30cleanup: rename is_ref_attr to attr_form_is_refSanimir Agovic2-32/+39
2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com> gdb/ * dwarf2read.c (attr_is_ref): Rename to attr_form_is_ref. All uses updated. (attr_form_is_ref): Moved below attr_form_is_constant.
2013-07-29 * main.c (captured_command_loop): Tweak comment.Doug Evans2-1/+3
2013-07-29 * target.c (target_async_permitted_1): Fix comment.Doug Evans2-1/+3
2013-07-29 * symtab.c (iterate_over_some_symtabs): Add comment.Doug Evans2-1/+5
2013-07-29 * symtab.c (iterate_over_some_symtabs): Fix indentation.Doug Evans2-25/+29
2013-07-27gdb/gdbserver/Yao Qi6-1/+402
* Makefile.in (SFILES): Add common/mips-linux-watch.c. (mips-linux-watch.o): New rule. (mips_linux_watch_h): New variable. * configure.srv <mips*-*-linux*>: Add mips-linux-watch.o to srv_tgtobj. * linux-mips-low.c: Include mips-linux-watch.h. (struct arch_process_info, struct arch_lwp_info): New. (update_watch_registers_callback): New function. (mips_linux_new_process, mips_linux_new_thread) New functions. (mips_linux_prepare_to_resume, mips_insert_point): New functions. (mips_remove_point, mips_stopped_by_watchpoint): New functions. (rsp_bp_type_to_target_hw_bp_type): New function. (mips_stopped_data_address): New function. (the_low_target): Add watchpoint support functions. gdb/ * NEWS: Mention that GDBserver now supports hardware watchpoints on the MIPS GNU/Linux target.
2013-07-27gdb/Yao Qi6-408/+513
* Makefile.in (HFILES_NO_SRCDIR): Add common/mips-linux-watch.h. (mips-linux-watch.o): New rule. * common/mips-linux-watch.c: New. * common/mips-linux-watch.h: New. * config/mips/linux.mh (NATDEPFILES): Add mips-linux-watch.o * mips-linux-nat.c: Include mips-linux-watch.h. (W_BIT, R_BIT, I_BIT, W_MASK, R_MASK, I_MASK, IRW_MASK): Move to common/mips-linux-watch.h. (MAX_DEBUG_REGISTER): Likewise. (enum pt_watch_style): Likewise. (struct mips32_watch_regs): Likewise. (struct mips64_watch_regs): Likewise. (struct pt_watch_regs): Likewise. (struct mips_watchpoint): Likewise. (mips_linux_watch_get_irw_mask): Move to common/mips-linux-watch.c. (get_reg_mask, mips_linux_watch_get_num_valid): Likewise. (mips_linux_watch_get_watchlo): Likewise. (mips_linux_watch_set_watchlo): Likewise. (mips_linux_watch_get_watchhi): Likewise. (mips_linux_watch_set_watchhi): Likewise. (mips_linux_read_watch_registers): Likewise. (mips_linux_watch_type_to_irw): Likewise. (mips_linux_stopped_data_address, fill_mask): Likewise. (mips_linux_watch_try_one_watch): Likewise. (mips_linux_watch_populate_regs): Likewise.
2013-07-27gdb/Yao Qi2-87/+155
* mips-linux-nat.c (get_irw_mask): Rename to ... (mips_linux_watch_get_irw_mask): ... this. Rename parameter 'set' to 'n'. Update function comment. All callers changed. (get_reg_mask): Rename parameter 'set' to 'n'. Update function comment. All callers changed. (get_num_valid): Rename to ... (mips_linux_watch_get_num_valid): ... this. Rename parameter 'set' to 'n'. Update function comment. All callers changed. (get_watchlo): Rename to ... (mips_linux_watch_get_watchlo): ... this. Rename parameter 'set' to 'n'. Update function comment. All callers changed. (set_watchlo): Rename to ... (mips_linux_watch_set_watchlo): ... this. Rename parameter 'set' to 'n'. Update function comment. All callers changed. (get_watchhi): Rename to ... (mips_linux_watch_get_watchhi): ... this. Update function comment. All callers changed. (set_watchhi): Rename to ... (mips_linux_watch_set_watchhi): ... this. Update function comment. All callers changed. (mips_linux_read_watch_registers): Update function comment. Add new parameters 'lwpid', 'watch_readback', and 'watch_readback_valid'. Update. (type_to_irw): Rename to ... (mips_linux_watch_type_to_irw): ... this. Update function comment. All callers changed. (fill_mask): Update function comment. (try_one_watch): Rename to ... (mips_linux_watch_try_one_watch): ... this. Change the type of parameter 'irw' from 'unsigned' to 'uint32_t'. (populate_regs_from_watches): Rename to ... (mips_linux_watch_populate_regs): ... this. Add parameter 'current_watches'. All callers changed.
2013-07-27gdb/Yao Qi2-16/+31
* mips-linux-nat.c (MAX_DEBUG_REGISTER): Move it earlier in the code. (PTRACE_SET_WATCH_REGS, enum pt_watch_style): Remove. (struct mips32_watch_regs, struct mips64_watch_regs): Remove. (struct pt_watch_regs): Likewise. [!PTRACE_GET_WATCH_REGS] (PTRACE_SET_WATCH_REGS): New macro. [!PTRACE_GET_WATCH_REGS] (enum pt_watch_style): New. [!PTRACE_GET_WATCH_REGS] (struct mips32_watch_regs): New. [!PTRACE_GET_WATCH_REGS] (struct mips64_watch_regs): New. [!PTRACE_GET_WATCH_REGS] (struct pt_watch_regs): New.
2013-07-27gdb/Yao Qi5-17/+43
* breakpoint.h: Include break-common.h. (enum target_hw_bp_type): Move to ... * common/break-common.h: ... here. New. gdb/gdbserver/ * i386-low.c: Include break-common.h. (enum target_hw_bp_type): Remove.
2013-07-26 * gdb.mi/mi-var-child-f.exp: Pass f90 to gdb_compile insteadKeith Seitz2-8/+23
of f77. Allow for compiler variations of integer types. Use mi_create_varobj. Use mi_list_varobj_children for the immediate children of `array'. Add "has_more" attribute for grandchildren test.
2013-07-26GDB kills itself instead of interrupting inferiorPedro Alves5-7/+121
When GDB is run with IO redirected to a pipe, the 'interrupt' command causes it to kill its own process group instead of the inferior's. The problem manifests itself in async mode, native debugging: $ cat | gdb <file> (gdb) set target-async on (gdb) run & (gdb) interrupt A debugging session is active. Inferior 1 [process 20584] will be killed. Quit anyway? (y or n) [answered Y; input not from terminal] In this case, GDB tells that its stdin isn't a tty and doesn't save the inferior's process group in inflow.c:terminal_init_inferior_with_pgrp. The 'interrupt' command tries to 'kill' the inferior's process group in `inf-ptrace.c:inf_ptrace_stop`, but since that wasn't saved in the first place, GDB kills process group 0, meaning, its own process group. When GDB is used from a frontend, that means killing its own process group including the frontend and possibly the X session. This was originally seen with SublimeGDB: https://github.com/quarnster/SublimeGDB/issues/29. The patch makes GDB save the inferior pgid regardless of having a terminal, as pgid is used not only to reset foreground process group, but also to interrupt the inferior process. It also adds a regression test. Luckily, we can emulate not having a terminal with "set interactive-mode off", avoiding the need of special magic to spawn gdb with a pipe. Tested on x86_64 Fedora 17. gdb/ 2013-07-26 Cyril Nikolaev <cyril@nichtverstehen.de> * inflow.c (terminal_init_inferior_with_pgrp): Save inferior process group regardless of having tty on stdin. gdb/testsuite/ 2013-07-26 Pedro Alves <palves@redhat.com> * gdb.base/interrupt-noterm.c, gdb.base/interrupt-noterm.exp: New files.
2013-07-25 * linux-fork.h (detach_fork): Delete.Doug Evans2-3/+4
2013-07-25remove pop_targetTom Tromey9-28/+25
This patch fixes the target double-close problem (PR remote/15266), and in the process removes pop_target entire (PR remote/15256). The first issue is that pop_target calls target_close. However, it then calls unpush_target, which also calls target_close. This means targets must be able to be closed twice. Not only is this strange, but it also directly contradicts the contract of to_xclose targets. (We currently have just a single such target, and it is never pushed; but I plan to add more, and so this latent bug is triggered.) The second issue is that it seems to me that calling pop_target is often unsafe. This is what cropped up in 15256, where the remote target assumed that it could pop_target -- but there was another target higher on the stack, leading to confusion. But, it is always just as easy to call unpush_target as it is to call pop_target; and it is also safer. So, removing pop_target seemed like an improvement. Finally, this adds an assertion to target_close to ensure that no currently-pushed target can be closed. Built and regtested on x86-64 Fedora 18; both natively and using the native-gdbserver board file. PR remote/15256, PR remote/15266: * bfd-target.c (target_bfd_reopen): Initialize to_magic. * monitor.c (monitor_detach): Use unpush_target. * remote-m32r-sdi.c (m32r_detach): Use unpush_target. * remote-mips.c (mips_detach): Use unpush_target. Don't call mips_close. * remote-sim.c (gdbsim_detach): Use unpush_target. * target.c (pop_target): Remove. (pop_all_targets_above): Don't call target_close. (target_close): Assert that the target is unpushed. * target.h (pop_target): Don't declare. * tracepoint.c (tfile_open): Use unpush_target.
2013-07-25don't call add_target for thread_db_opsTom Tromey4-8/+32
Right now, "help target" will include this line: target multi-thread -- Threads and pthreads support However, it doesn't make sense to invoke "target multi-thread". This patch fixes the problem by not registering the multi-thread target. add_target does some needed initialization of the target_ops, so I broke this out into a new function. It isn't clear to me whether this patch requires a test case or not. I'm not sure whether there are other unregistered targets; but if there are, it seems unlikely that we test for their absence from the help. Built and regtested on x86-64 Fedora 18. * linux-thread-db.c (init_thread_db_ops): Call complete_target_initialization. (_initialize_thread_db): Don't call add_target. * target.c (complete_target_initialization): New function. (add_target_with_completer): Call it. * target.h (complete_target_initialization): Declare.
2013-07-252013-07-25 Mark Kettenis <kettenis@gnu.org>Mark Kettenis4-17/+139
* hppa-tdep.h (enum hppa_regnum): Add members for all space registers. * hppaobsd-tdep.c (HPPAOBSD_SIZEOF_GREGS): Add comment. (HPPANBSD_SIZEOF_GREGS): New define. (hppaobsd_supply_gregset): Handle additional registers. * hppabsd-nat.c (hppabsd_gregset_supplies_p): Adjust to indicate we provide more registers now. (hppabsd_supply_gregset): Supply additional registers. (hppabsd_collect_gregset): Collect additional registers.
2013-07-252013-07-25 Mark Kettenis <kettenis@gnu.org>Mark Kettenis2-0/+22
* hppabsd-tdep.c: Include "dwarf2-frame.h". (hppabsd_dwarf2_frame_init_reg): New function. (hppabsd_init_abi): Hook in the DWARF CFI frame unwinder.
2013-07-25Resue 'z' formatter from mi register display code.Andrew Burgess6-37/+652
http://sourceware.org/ml/gdb-patches/2013-07/msg00236.html gdb/ChangeLog * mi/mi-main.c (output_register): Make MI 'r' format use standard 'z' format code. Remove error for optimized out values, standard code will handle these fine. gdb/testsuite/ChangeLog * gdb.mi/mi-reg-undefined.exp: New file. * gdb.mi/mi-reg-undefined.c: Likewise. * gdb.mi/mi-reg-undefined.S: Likewise.
2013-07-25Add new 'z' format for print command.Andrew Burgess8-2/+43
http://sourceware.org/ml/gdb-patches/2013-07/msg00235.html gdb/ChangeLog * NEWS: Mention new 'z' formatter. * printcmd.c (print_scalar_formatted): Add new 'z' formatter. (_initialize_printcmd): Mention 'z' formatter in help text of the 'x' command. gdb/doc/ChangeLog * gdb.texinfo (Output Formats): Mention the new 'z' formatter. gdb/testsuite/ChangeLog * gdb.base/printcmds.exp (test_print_int_arrays): Add tests for x, z, o, and t output formats. * gdb.base/display.exp: Use 'k' as an undefined format now that 'z' is defined.
2013-07-24 * mips-tdep.c (micromips_deal_with_atomic_sequence): CorrectMaciej W. Rozycki2-1/+6
formatting.
2013-07-24 * boards/native-stdio-gdbserver.exp (${board}_build_remote_cmd): PassDoug Evans2-1/+6
"--" to switch.
generated by cgit v1.1 at 2025-08-06 12:18:37 +0000