| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch converts the DTrace probe
interface (gdb/dtrace-probe.[ch]) to C++, and also performs some
cleanups that were on my TODO list for a while.
The main changes were the conversion of 'struct dtrace_probe' to 'class
dtrace_probe', and a new 'class dtrace_static_probe_ops' to replace the
use of 'dtrace_probe_ops'. Both classes implement the virtual methods
exported by their parents, 'class probe' and 'class static_probe_ops',
respectively. I believe it's now a bit simpler to understand the
logic behind the dtrace-probe interface.
There are several helper functions used to parse parts of a dtrace
probe, and since they are generic and don't need to know about the
probe they're working on, I decided to leave them as simple static
functions (instead of e.g. converting them to class methods).
I've also converted a few uses of "VEC" to "std::vector", which makes
the code simpler and easier to maintain. And, as usual, some cleanups
here and there.
Even though I'm sending a series of patches, they need to be tested
and committed as a single unit, because of inter-dependencies. But it
should be easier to review in separate logical units.
I wasn't able to test these modifications because the current test
framework for DTrace probes is not working. See
<https://sourceware.org/bugzilla/show_bug.cgi?id=22420>.
gdb/ChangeLog:
2017-11-22 Sergio Durigan Junior <sergiodj@redhat.com>
* dtrace-probe.c (struct probe_ops dtrace_probe_ops): Delete.
(struct dtrace_probe_arg) <dtrace_probe_arg>: New constructor.
<type_str>: Convert to 'std::string'.
<expr>: Convert to 'expression_up'.
(dtrace_probe_arg_s): Delete type and VEC.
(dtrace_probe_enabler_s): Likewise.
(struct dtrace_probe): Replace by...
(class dtrace_static_probe_ops): ...this and...
(class dtrace_probe): ...this.
(dtrace_probe_is_linespec): Rename to...
(dtrace_static_probe_ops::is_linespec): ...this. Adjust code
to reflect change.
(dtrace_process_dof_probe): Use 'std::vector' instead of VEC.
Adjust code. Create new instance of 'dtrace_probe'.
(dtrace_build_arg_exprs): Rename to...
(dtrace_probe::build_arg_exprs): ...this. Adjust code to
reflect change.
(dtrace_get_probes): Rename to...
(dtrace_static_probe_ops::get_probes): ...this. Adjust code
to reflect change.
(dtrace_get_arg): Rename to...
(dtrace_probe::get_arg_by_number): ...this. Adjust code to
reflect change.
(dtrace_probe_is_enabled): Rename to...
(dtrace_probe::is_enabled): ...this. Adjust code to reflect
change.
(dtrace_get_probe_address): Rename to...
(dtrace_probe::get_relocated_address): ...this. Adjust code
to reflect change.
(dtrace_get_probe_argument_count): Rename to...
(dtrace_probe::get_argument_count): ...this. Adjust code to
reflect change.
(dtrace_can_evaluate_probe_arguments): Rename to...
(dtrace_probe::can_evaluate_arguments): ...this. Adjust code
to reflect change.
(dtrace_evaluate_probe_argument): Rename to...
(dtrace_probe::evaluate_argument): ...this. Adjust code to
reflect change.
(dtrace_compile_to_ax): Rename to...
(dtrace_probe::compile_to_ax): ...this. Adjust code to
reflect change.
(dtrace_probe_destroy): Delete.
(dtrace_type_name): Rename to...
(dtrace_static_probe_ops::type_name): ...this. Adjust code to
reflect change.
(dtrace_probe::get_static_ops): New method.
(dtrace_gen_info_probes_table_header): Rename to...
(dtrace_static_probe_ops::gen_info_probes_table_header):
...this. Adjust code to reflect change.
(dtrace_gen_info_probes_table_values): Rename to...
(dtrace_probe::gen_info_probes_table_values): ...this. Adjust
code to reflect change.
(dtrace_enable_probe): Rename to...
(dtrace_probe::enable_probe): ...this. Adjust code to reflect
change.
(dtrace_disable_probe): Rename to...
(dtrace_probe::disable_probe): ...this. Adjust code to reflect
change.
(struct probe_ops dtrace_probe_ops): Delete.
(info_probes_dtrace_command): Call 'info_probes_for_spops'
instead of 'info_probes_for_ops'.
(_initialize_dtrace_probe): Use 'all_static_probe_ops' instead
of 'all_probe_ops'.
|
|
This patch converts the SystemTap probe
interface (gdb/stap-probe.[ch]) to C++, and also performs some
cleanups that were on my TODO list for a while.
The main changes were the conversion of 'struct stap_probe' to 'class
stap_probe', and a new 'class stap_static_probe_ops' to replace the
use of 'stap_probe_ops'. Both classes implement the virtual methods
exported by their parents, 'class probe' and 'class static_probe_ops',
respectively. I believe it's now a bit simpler to understand the
logic behind the stap-probe interface.
There are several helper functions used to parse parts of a stap
probe, and since they are generic and don't need to know about the
probe they're working on, I decided to leave them as simple static
functions (instead of e.g. converting them to class methods).
I've also converted a few uses of "VEC" to "std::vector", which makes
the code simpler and easier to maintain. And, as usual, some cleanups
here and there.
Even though I'm sending a series of patches, they need to be tested
and committed as a single unit, because of inter-dependencies. But it
should be easier to review in separate logical units.
I've regtested this patch on BuildBot, no regressions found.
gdb/ChangeLog:
2017-11-22 Sergio Durigan Junior <sergiodj@redhat.com>
Simon Marchi <simark@simark.ca>
* stap-probe.c (struct probe_ops stap_probe_ops): Delete
variable.
(struct stap_probe_arg) <stap_probe_arg>: New constructor.
<aexpr>: Change type to 'expression_up'.
(stap_probe_arg_s): Delete type and VEC.
(struct stap_probe): Delete. Replace by...
(class stap_static_probe_ops): ...this and...
(class stap_probe): ...this. Rename variables to add 'm_'
prefix. Do not use 'union' for arguments anymore.
(stap_get_expected_argument_type): Receive probe name instead
of 'struct stap_probe'. Adjust code.
(stap_parse_probe_arguments): Rename to...
(stap_probe::parse_arguments): ...this. Adjust code to
reflect change.
(stap_get_probe_address): Rename to...
(stap_probe::get_relocated_address): ...this. Adjust code
to reflect change.
(stap_get_probe_argument_count): Rename to...
(stap_probe::get_argument_count): ...this. Adjust code
to reflect change.
(stap_get_arg): Rename to...
(stap_probe::get_arg_by_number'): ...this. Adjust code to
reflect change.
(can_evaluate_probe_arguments): Rename to...
(stap_probe::can_evaluate_arguments): ...this. Adjust code
to reflect change.
(stap_evaluate_probe_argument): Rename to...
(stap_probe::evaluate_argument): ...this. Adjust code
to reflect change.
(stap_compile_to_ax): Rename to...
(stap_probe::compile_to_ax): ...this. Adjust code to
reflect change.
(stap_probe_destroy): Delete.
(stap_modify_semaphore): Adjust comment.
(stap_set_semaphore): Rename to...
(stap_probe::set_semaphore): ...this. Adjust code to reflect
change.
(stap_clear_semaphore): Rename to...
(stap_probe::clear_semaphore): ...this. Adjust code to
reflect change.
(stap_probe::get_static_ops): New method.
(handle_stap_probe): Adjust code to create instance of
'stap_probe'.
(stap_get_probes): Rename to...
(stap_static_probe_ops::get_probes): ...this. Adjust code to
reflect change.
(stap_probe_is_linespec): Rename to...
(stap_static_probe_ops::is_linespec): ...this. Adjust code to
reflect change.
(stap_type_name): Rename to...
(stap_static_probe_ops::type_name): ...this. Adjust code to
reflect change.
(stap_gen_info_probes_table_header): Rename to...
(stap_static_probe_ops::gen_info_probes_table_header):
...this. Adjust code to reflect change.
(stap_gen_info_probes_table_values): Rename to...
(stap_probe::gen_info_probes_table_values): ...this. Adjust
code to reflect change.
(struct probe_ops stap_probe_ops): Delete.
(info_probes_stap_command): Use 'info_probes_for_spops'
instead of 'info_probes_for_ops'.
(_initialize_stap_probe): Use 'all_static_probe_ops' instead
of 'all_probe_ops'.
|
|
This patch converts the generic probe interface (gdb/probe.[ch]) to
C++, and also performs some cleanups that were on my TODO list for a
while.
The main changes were the conversion of 'struct probe' to 'class
probe', and 'struct probe_ops' to 'class static_probe_ops'. The
former now contains all the "dynamic", generic methods that act on a
probe + the generic data related to it; the latter encapsulates a
bunch of "static" methods that relate to the probe type, but not to a
specific probe itself.
I've had to do a few renamings (e.g., on 'struct bound_probe' the
field is called 'probe *prob' now, instead of 'struct probe *probe')
because GCC was complaining about naming the field using the same name
as the class. Nothing major, though. Generally speaking, the logic
behind and the design behind the code are the same.
Even though I'm sending a series of patches, they need to be tested
and committed as a single unit, because of inter-dependencies. But it
should be easier to review in separate logical units.
I've regtested this patch on BuildBot, no regressions found.
gdb/ChangeLog:
2017-11-22 Sergio Durigan Junior <sergiodj@redhat.com>
* break-catch-throw.c (fetch_probe_arguments): Use
'probe.prob' instead of 'probe.probe'.
* breakpoint.c (create_longjmp_master_breakpoint): Call
'can_evaluate_arguments' and 'get_relocated_address' methods
from probe.
(create_exception_master_breakpoint): Likewise.
(add_location_to_breakpoint): Use 'sal->prob' instead of
'sal->probe'.
(bkpt_probe_insert_location): Call 'set_semaphore' method from
probe.
(bkpt_probe_remove_location): Likewise, for 'clear_semaphore'.
* elfread.c (elf_get_probes): Use 'static_probe_ops' instead
of 'probe_ops'.
(probe_key_free): Call 'delete' on probe.
(check_exception_resume): Use 'probe.prob' instead of
'probe.probe'.
* location.c (string_to_event_location_basic): Call
'probe_linespec_to_static_ops'.
* probe.c (class any_static_probe_ops): New class.
(any_static_probe_ops any_static_probe_ops): New variable.
(parse_probes_in_pspace): Receive 'static_probe_ops' as
argument. Adjust code to reflect change.
(parse_probes): Use 'static_probe_ops' instead of
'probe_ops'. Adjust code to reflect change.
(find_probes_in_objfile): Call methods to get name and
provider from probe.
(find_probe_by_pc): Use 'result.prob' instead of
'result.probe'. Call 'get_relocated_address' method from
probe.
(collect_probes): Adjust comment and argument list to receive
'static_probe_ops' instead of 'probe_ops'. Adjust code to
reflect change. Call necessary methods from probe.
(compare_probes): Call methods to get name and provider from
probes.
(gen_ui_out_table_header_info): Receive 'static_probe_ops'
instead of 'probe_ops'. Use 'std::vector' instead of VEC,
adjust code accordingly.
(print_ui_out_not_applicables): Likewise.
(info_probes_for_ops): Rename to...
(info_probes_for_spops): ...this. Receive 'static_probe_ops'
as argument instead of 'probe_ops'. Adjust code. Call
necessary methods from probe.
(info_probes_command): Use 'info_probes_for_spops'.
(enable_probes_command): Pass correct argument to
'collect_probes'. Call methods from probe.
(disable_probes_command): Likewise.
(get_probe_address): Move to 'any_static_probe_ops::get_address'.
(get_probe_argument_count): Move to
'any_static_probe_ops::get_argument_count'.
(can_evaluate_probe_arguments): Move to
'any_static_probe_ops::can_evaluate_arguments'.
(evaluate_probe_argument): Move to
'any_static_probe_ops::evaluate_argument'.
(probe_safe_evaluate_at_pc): Use 'probe.prob' instead of
'probe.probe'.
(probe_linespec_to_ops): Rename to...
(probe_linespec_to_static_ops): ...this. Adjust code.
(probe_any_is_linespec): Rename to...
(any_static_probe_ops::is_linespec): ...this.
(probe_any_get_probes): Rename to...
(any_static_probe_ops::get_probes): ...this.
(any_static_probe_ops::type_name): New method.
(any_static_probe_ops::gen_info_probes_table_header): New
method.
(compute_probe_arg): Use 'pc_probe.prob' instead of
'pc_probe.probe'. Call methods from probe.
(compile_probe_arg): Likewise.
(std::vector<const probe_ops *> all_probe_ops): Delete.
(std::vector<const static_probe_ops *> all_static_probe_ops):
New variable.
(_initialize_probe): Use 'all_static_probe_ops' instead of
'all_probe_ops'.
* probe.h (struct info_probe_column) <field_name>: Delete
extraneous newline
(info_probe_column_s): Delete type and VEC.
(struct probe_ops): Delete. Replace with...
(class static_probe_ops): ...this and...
(clas probe): ...this.
(struct bound_probe) <bound_probe>: Delete extraneous
newline. Adjust constructor to receive 'probe' instead of
'struct probe'.
<probe>: Rename to...
<prob>: ...this. Delete extraneous newline.
<objfile>: Delete extraneous newline.
(register_probe_ops): Delete unused prototype.
(info_probes_for_ops): Rename to...
(info_probes_for_spops): ...this. Adjust comment.
(get_probe_address): Move to 'probe::get_address'.
(get_probe_argument_count): Move to
'probe::get_argument_count'.
(can_evaluate_probe_arguments): Move to
'probe::can_evaluate_arguments'.
(evaluate_probe_argument): Move to 'probe::evaluate_argument'.
* solib-svr4.c (struct svr4_info): Adjust comment.
(struct probe_and_action) <probe>: Rename to...
<prob>: ...this.
(register_solib_event_probe): Receive 'probe' instead of
'struct probe' as argument. Use 'prob' instead of 'probe'
when applicable.
(solib_event_probe_action): Call 'get_argument_count' method
from probe. Adjust comment.
(svr4_handle_solib_event): Adjust comment. Call
'evaluate_argument' method from probe.
(svr4_create_probe_breakpoints): Call 'get_relocated_address'
from probe.
(svr4_create_solib_event_breakpoints): Use 'probe' instead of
'struct probe'. Call 'can_evaluate_arguments' from probe.
* symfile.h: Forward declare 'class probe' instead of 'struct
probe'.
* symtab.h: Likewise.
(struct symtab_and_line) <probe>: Rename to...
<prob>: ...this.
* tracepoint.c (start_tracing): Use 'prob' when applicable.
Call probe methods.
(stop_tracing): Likewise.
|
|
A recent patch introduced a call to warning, and the string used
had a trailing newline, which is not correct; the nightly ARI run
caught it, so this patch removes it.
gdb/ChangeLog:
* ravenscar-thread.c (ravenscar_inferior_created): Remove
trailing newline at end of string in call to warning.
Tested on powerpc-eabispe, no regression.
|
|
This patch c++ifies the osdata structure: osdata_column, osdata_item and
osdata. char* are replaced with std::string and VEC are replaced with
std::vector. This allows to get rid of a great deal of cleanup and
free'ing code.
I replaced the splay tree in list_available_thread_groups with an
std::map. Unless there's a good advantage to keep using a splay tree,
I think using the standard type should make things simpler to
understand.
gdb/ChangeLog:
* osdata.h: Include vector isntead of vec.h.
(osdata_column_s): Remove typedef.
(struct osdata_column): Add constructor.
<name, value>: Change type to std::string.
(DEF_VEC_O (osdata_column_s)): Remove.
(osdata_item_s): Remove typedef.
(struct osdata_item) <columns>: Change type to std::vector.
(DEF_VEC_O (osdata_item_s)): Remove.
(struct osdata): Add constructor.
<type>: Change type to std::string.
<items>: Change type to std::vector.
(osdata_p): Remove typedef.
(DEF_VEC_P (osdata_p)): Remove.
(osdata_parse): Return a unique_ptr.
(osdata_free): Remove.
(make_cleanup_osdata_free): Remove.
(get_osdata): Return a unique_ptr.
(get_osdata_column): Return pointer to std::string, take a
reference to osdata_item as parameter.
* osdata.c (struct osdata_parsing_data) <osdata>: Change type to
unique_ptr.
<property_name>: Change type to std::string.
(osdata_start_osdata): Allocate osdata with new and adjust.
(osdata_start_item): Adjust.
(osdata_start_column): Adjust.
(osdata_end_column): Adjust.
(clear_parsing_data): Remove.
(osdata_parse): Return a unique_ptr and adjust, remove cleanup.
(osdata_item_clear): Remove.
(get_osdata): return a unique_ptr and adjust.
(get_osdata_column): Return a pointer to std::string and adjust.
(info_osdata): Adjust.
* mi/mi-main.c: Include <map>.
(free_vector_of_osdata_items): Remove.
(list_available_thread_groups): Adjust, use std::map instead of
splay tree.
|
|
Currently, optimized out variables are not shown when doing "info
locals". Some users found that confusing, thinking GDB forgot to print
their variable. This patch adds them to the "info locals" output. I
added a test in gdb.dwarf2 to test for that behavior. I think doing a
synthetic DWARF test is the easiest way to have an optimized out local
variable for sure.
However, this change reveals what I think is a bug in GDB, see:
http://lists.dwarfstd.org/pipermail/dwarf-discuss-dwarfstd.org/2017-September/004394.html
This patch marks the tests in inline-locals.exp that start failing as
KFAIL. I'd like to tackle this bug eventually, but I don't have the
time right now. I think it's still better to show an extra erroneous
entry than to not show the optimized out variables at all. I haven't
created a bug in bugzilla yet, but if we agree it's indeed a bug, I'll
create one and update the setup_kfail lines with the actual bug number
before pushing.
gdb/ChangeLog:
* stack.c (iterate_over_block_locals): Add LOC_OPTIMIZED_OUT
case in switch.
gdb/testsuite/ChangeLog:
* gdb.opt/inline-locals.exp: Mark tests as KFAIL.
* gdb.dwarf2/info-locals-optimized-out.exp: New file.
* gdb.dwarf2/info-locals-optimized-out.c: New file.
|
|
The last patch removed the last usage of this type, so we can remove it.
gdb/ChangeLog:
* varobj.h (DEF_VEC_P (varobj_p)): Remove.
|
|
This patch replaces makes varobj_update return an std::vector, and
updates the fallouts.
To make that easier, the varobj_update_result is c++ified a bit. I
added a constructor and initialized its fields in-class. The newobj
vector is also made an std::vector, so that it's automatically freed
when varobj_update_result is destroyed and handled correctly by the
default move constructor. I disabled copy constructor and assignment
for that structure, because normally it never needs to be copied, only
moved.
As a result, the newobj parameter of update_dynamic_varobj_children must
be changed to an std::vector. The patch converts the other vector
parameters of update_dynamic_varobj_children to std::vector. It's not
strictly necessary to do it in the same patch, but I think it makes
sense to do it.
gdb/ChangeLog:
* varobj.h (struct varobj_update_result): Add constructor, add
move constructor, disable copy and assign, initialize fields.
<newobj>: Change type to std::vector.
(varobj_update): Return std::vector.
* varobj.c (install_dynamic_child): Change VEC parameters to
std::vector and adjust.
(update_dynamic_varobj_children): Likewise.
(varobj_update): Return std::vector and adjust.
* mi/mi-cmd-var.c (varobj_update_one): Adjust to vector changes.
|
|
This patch makes the children field of varobj an std::vector, and
updates the fallout.
One note is that varobj::parent must be made non-const. The reason is
that when a child deletes itself, it modifies its writes NULL to its
slot in its parent's children vector. With the VEC, the const didn't
made the parent's children vector content const, only the pointer to it,
but with std::vector, even the content is.
gdb/ChangeLog:
* varobj.h (struct varobj) <parent>: Remove const.
<children>: Change type to std::vector.
(varobj_list_children): Return std::vector const reference.
(varobj_restrict_range): Change parameter type to std::vector
const reference.
* varobj.c (varobj_has_more): Adjust.
(varobj_restrict_range): Change parameter type to std::vector
const reference and adjust.
(install_dynamic_child): Adjust.
(update_dynamic_varobj_children): Adjust.
(varobj_list_children): Return std::vector const reference and
adjust.
(varobj_add_child): Adjust.
(update_type_if_necessary): Adjust.
(varobj_update): Adjust.
(delete_variable_1): Adjust.
* ada-varobj.c (ada_value_has_mutated): Adjust.
* mi/mi-cmd-var.c (mi_cmd_var_list_children): Adjust.
|
|
This patch does a basic c++ification or the varobj data structure.
- varobj: add constructor and destructor, initialize fields
- varobj_root: initialize fields
- varobj_dynamic: initialize fields
This allows getting rid of new_variable, new_root_variable.
free_variable essentially becomes varobj's destructor. This also allows
getting rid of a cleanup, make_cleanup_free_variable, which was only
used in varobj_create in case the varobj creation fails. It is replaced
with a unique_ptr.
gdb/ChangeLog:
* varobj.h (struct varobj): Add constructor and destructor,
initialize fields.
* varobj.c (struct varobj_root): Initialize fields.
(struct varobj_dynamic): Initialize fields.
(varobj_create): Use unique_ptr instead of cleanup. Create
varobj with new instead of new_root_variable.
(delete_variable_1): Free variable with delete instead of
free_variable.
(create_child_with_value): Create variable with new instead of
new_variable.
(varobj::varobj): New.
(varobj::~varobj): New (body mostly coming from free_variable).
(new_variable): Remove.
(free_variable): Remove.
(do_free_variable_cleanup): Remove.
(make_cleanup_free_variable): Remove.
|
|
The last target that used core-regset.c (FreeBSD/alpha) has been
removed with GDB 8.0, and since then this file is obsolete.
|
|
"pthreads" in the right flag to pass in prepare_for_testing to linker,
instead of additional_flags. Without this patch, the test case can't be
complied by clang.
gdb compile failed, clang: warning: -lpthread: 'linker' input unused
gdb/testsuite:
2017-11-22 Yao Qi <yao.qi@linaro.org>
* gdb.base/info-os.exp: Pass pthreads.
* gdb.multi/multi-attach.exp: Likewise.
|
|
gdb.dwarf2/pr10770.exp can be used for non-gcc compiler, at least clang.
This patch removes the restriction to only use gcc. If other compilers,
like xlc or icc, can't compile the .c file, test result is not changed.
gdb/testsuite:
2017-11-22 Yao Qi <yao.qi@linaro.org>
* gdb.dwarf2/pr10770.exp: Remove code skipping non-gcc
compiler.
|
|
-pie is a linker flag, it should be passed via "ldflags", instead
of "additional_flags". Otherwise, clang complains,
clang: warning: argument unused during compilation: '-pie'
gdb/testsuite:
2017-11-22 Yao Qi <yao.qi@linaro.org>
* gdb.base/attach-pie-noexec.exp: Pass "-pie" in ldflags.
* gdb.base/break-interp.exp: Likewise.
* gdb.base/jit-attach-pie.exp: Likewise.
|
|
This second patch introduces mfpr_float_ops, an new implementation
of target_float_ops. This implements precise emulation of target
floating-point formats using the MPFR library. This is then used
to perform operations on types that do not match any host type.
Note that use of MPFR is still not required. The patch adds
a configure option --with-mpfr similar to --with-expat. If use of
MPFR is disabled via the option or MPFR is not available, code will
fall back to current behavior. This means that operations on types
that do not match any host type will be implemented on the host
long double type instead.
A new test case verifies that we can correctly print the largest
__float128 value now.
gdb/ChangeLog:
2017-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* NEWS: Document use of GNU MPFR.
* README: Likewise.
* Makefile.in (LIBMPFR): Add define.
(CLIBS): Add $(LIBMPFR).
* configure.ac: Add --with-mpfr configure option.
* configure: Regenerate.
* config.in: Regenerate.
* target-float.c [HAVE_LIBMPFR]: Include <mpfr.h>.
(class mpfr_float_ops): New type.
(mpfr_float_ops::from_target): Two new overloaded functions.
(mpfr_float_ops::to_target): Likewise.
(mpfr_float_ops::to_string): New function.
(mpfr_float_ops::from_string): Likewise.
(mpfr_float_ops::to_longest): Likewise.
(mpfr_float_ops::from_longest): Likewise.
(mpfr_float_ops::from_ulongest): Likewise.
(mpfr_float_ops::to_host_double): Likewise.
(mpfr_float_ops::from_host_double): Likewise.
(mpfr_float_ops::convert): Likewise.
(mpfr_float_ops::binop): Likewise.
(mpfr_float_ops::compare): Likewise.
(get_target_float_ops): Use mpfr_float_ops if available.
gdb/doc/ChangeLog:
2017-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.texinfo (Requirements): Document use of GNU MPFR.
gdb/testsuite/ChangeLog:
2017-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.base/float128.c (large128): New variable.
* gdb.base/float128.exp: Add test to print largest __float128 value.
|
|
Prepare for using MPFR to implement floating-point arithmetic by
refactoring the way host floating-point arithmetic is currently used.
In particular, fix the following two problems that cause different
(and incorrect) results due to using host arithmetic:
- Current processing always uses host "long double", and then converts
back to the actual target format. This may introduce rounding errors.
- Conversion of FP values to LONGEST simply does a host C++ type cast.
However the result of such a cast is undefined if the source value
is outside the representable range. MPFR always has defined behavior
here (returns the minimum or maximum representable value).
To fix the first issue, I've now created not just one set of routines
using host FP arithmetic (on long double), but instead three different
sets of routines, one each for host float, double, and long double.
Operations can then be performed in the desired type directly, avoiding
the extra rounding step. Using C++ templates, the three sets can all
share the same source code without duplication.
To fix the second issue, I'm simply enforcing the same conversion rule
(which makes sense anyway) when converting out-of-range values from
FP to LONGEST.
To contain the code complexity with the variety of options now possible,
I've created a new class "target_float_ops". There are a total of five
separate implementations of this:
host_float_ops<float> Implemented via host FP in given type
host_float_ops<double>
host_float_ops<long double>
mpfr_float_ops Implemented via MPFR if available
decimal_float_ops Implemented via libdecnumber
Note instead of using the DOUBLEST define, this always just uses the
"long double" data type. But since we now require C++11 anyway, this
type must in any case be avaialble unconditionally.
Most target floating-point operations simply dispatch to a (virtual)
member routine of this class. Which implementation to choose is
determined from the target types involved, and whether they match
some host type or not. E.g. any operation on a single type that
matches a host type is performed in that type. Operations involving
two types that both match host types are performed in the larger one
(according to C/C++ implicit conversion rules). Operations that
involve any type that does not match a host type are performed using
MPFR. (And of course operations involving decimal FP are performed
using libdecnumber.)
This first patch implements the refactoring of target-float.c as
described above, introduing the host_float_ops and decimal_float_ops
classes, and using them. Use of MPFR is introduced in the second patch.
A bit of special-case handling code is moved around to as to avoid
code duplication between host_float_ops and mpfr_float_ops.
Note that due to the changes mentioned above, I've had to update (fix)
the floating-point register values tested in the gdb.arch/vsx-regs.exp
test case. (The new values now work both with host arithmetic and MPFR.)
gdb/ChangeLog:
2017-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* target-float.c: Do not include <math.h>.
Include <cmath> and <limits>.
(DOUBLEST): Do not define.
(class target_float_ops): New type.
(class host_float_ops): New templated type.
(class decimal_float_ops): New type.
(floatformat_to_doublest): Rename to ...
(host_float_ops<T>::from_target): ... this. Use template type T
instead of DOUBLEST. Use C++ math routines. Update recursive calls.
(host_float_ops<T>::from_target): New overload using a type argument.
(floatformat_from_doublest): Rename to ...
(host_float_ops<T>::to_target): ... this. Use template type T
instead of DOUBLEST. Use C++ math routines. Update recursive calls.
(host_float_ops<T>::to_target): New overload using a type argument.
(floatformat_printf_format): New function.
(struct printf_length_modifier): New templated type.
(floatformat_to_string): Rename to ...
(host_float_ops<T>::to_string): ... this. Use type instead of
floatformat argument. Use floatformat_printf_format and
printf_length_modifier. Remove special handling of invalid numbers,
infinities and NaN (moved to target_float_to_string).
(struct scanf_length_modifier): New templated type.
(floatformat_from_string): Rename to ...
(host_float_ops<T>::from_string): ... this. Use type instead of
floatformat argument. Use scanf_length_modifier.
(floatformat_to_longest): Rename to ...
(host_float_ops<T>::to_longest): ... this. Use type instead of
floatformat argument. Handle out-of-range values deterministically.
(floatformat_from_longest): Rename to ...
(host_float_ops<T>::from_longest): ... this. Use type instead of
floatformat argument.
(floatformat_from_ulongest): Rename to ...
(host_float_ops<T>::from_ulongest): ... this. Use type instead of
floatformat argument.
(floatformat_to_host_double): Rename to ...
(host_float_ops<T>::to_host_double): ... this. Use type instead of
floatformat argument.
(floatformat_from_host_double): Rename to ...
(host_float_ops<T>::from_host_double): ... this. Use type instead of
floatformat argument.
(floatformat_convert): Rename to ...
(host_float_ops<T>::convert): ... this. Use type instead of
floatformat arguments. Remove handling of no-op conversions.
(floatformat_binop): Rename to ...
(host_float_ops<T>::binop): ... this. Use type instead of
floatformat arguments.
(floatformat_compare): Rename to ...
(host_float_ops<T>::compare): ... this. Use type instead of
floatformat arguments.
(match_endianness): Use type instead of length/byte_order arguments.
(set_decnumber_context): Likewise.
(decimal_from_number): Likewise. Update calls.
(decimal_to_number): Likewise.
(decimal_is_zero): Likewise. Update calls. Move to earlier in file.
(decimal_float_ops::to_host_double): New dummy function.
(decimal_float_ops::from_host_double): Likewise.
(decimal_to_string): Rename to ...
(decimal_float_ops::to_string): ... this. Use type instead of
length/byte_order arguments. Update calls.
(decimal_from_string): Rename to ...
(decimal_float_ops::from_string): ... this. Use type instead of
length/byte_order arguments. Update calls.
(decimal_from_longest): Rename to ...
(decimal_float_ops::from_longest): ... this. Use type instead of
length/byte_order arguments. Update calls.
(decimal_from_ulongest): Rename to ...
(decimal_float_ops::from_ulongest): ... this. Use type instead of
length/byte_order arguments. Update calls.
(decimal_to_longest): Rename to ...
(decimal_float_ops::to_longest): ... this. Use type instead of
length/byte_order arguments. Update calls.
(decimal_binop): Rename to ...
(decimal_float_ops::binop): ... this. Use type instead of
length/byte_order arguments. Update calls.
(decimal_compare): Rename to ...
(decimal_float_ops::compare): ... this. Use type instead of
length/byte_order arguments. Update calls.
(decimal_convert): Rename to ...
(decimal_float_ops::convert): ... this. Use type instead of
length/byte_order arguments. Update calls.
(target_float_same_category_p): New function.
(target_float_same_format_p): Likewise.
(target_float_format_length): Likewise.
(enum target_float_ops_kind): New type.
(get_target_float_ops_kind): New function.
(get_target_float_ops): Three new overloaded functions.
(target_float_is_zero): Update call.
(target_float_to_string): Add special handling of invalid numbers,
infinities and NaN (moved from floatformat_to_string). Use
target_float_ops callback.
(target_float_from_string): Use target_float_ops callback.
(target_float_to_longest): Likewise.
(target_float_from_longest): Likewise.
(target_float_from_ulongest): Likewise.
(target_float_to_host_double): Likewise.
(target_float_from_host_double): Likewise.
(target_float_convert): Add special case for no-op conversions.
Use target_float_ops callback.
(target_float_binop): Use target_float_ops callback.
(target_float_compare): Likewise.
gdb/testsuite/ChangeLog:
2017-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.arch/vsx-regs.exp: Update register content checks.
|
|
Recent gcc 8 trunk emits the warning below,
../../binutils-gdb/gdb/python/py-gdb-readline.c:79:15: error: ‘char* strncpy(char*, const char*, size_t)’ output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
strncpy (q, p, n);
~~~~~~~~^~~~~~~~~
../../binutils-gdb/gdb/python/py-gdb-readline.c:73:14: note: length computed here
n = strlen (p);
~~~~~~~^~~
gdb:
2017-11-22 Yao Qi <yao.qi@linaro.org>
* python/py-gdb-readline.c (gdbpy_readline_wrapper): Use strcpy.
|
|
Recent gcc 8 trunk emits the warning below,
../../../binutils-gdb/gdb/gdbserver/remote-utils.c:1204:14: error: ‘char* strncpy(char*, const char*, size_t)’ output truncated before terminating nul copying 6 bytes from a string of the same length [-Werror=stringop-truncation]
strncpy (buf, "watch:", 6);
~~~~~~~~^~~~~~~~~~~~~~~~~~
../../binutils-gdb/gdb/cli/cli-decode.c:1118:15: error: ‘char* strncpy(char*, const char*, size_t)’ specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
strncpy (cmdtype1 + 1, cmdtype, len - 1);
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../binutils-gdb/gdb/cli/cli-decode.c:1110:16: note: length computed here
len = strlen (cmdtype);
~~~~~~~^~~~~~~~~
../../binutils-gdb/gdb/cli/cli-decode.c:1120:15: error: ‘char* strncpy(char*, const char*, size_t)’ specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
strncpy (cmdtype2, cmdtype, len - 1);
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../binutils-gdb/gdb/cli/cli-decode.c:1110:16: note: length computed here
len = strlen (cmdtype);
~~~~~~~^~~~~~~~~
../../binutils-gdb/gdb/cp-namespace.c:1071:11: error: ‘char* strncpy(char*, const char*, size_t)’ output truncated before terminating nul copying 2 bytes from a string of the same length [-Werror=stringop-truncation]
strncpy (full_name + scope_length, "::", 2);
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This patch fixes it by using memcpy instead of strncpy.
gdb:
2017-11-22 Yao Qi <yao.qi@linaro.org>
* cli/cli-decode.c (help_list): Use memcpy instead of strncpy.
* cp-namespace.c (cp_lookup_transparent_type_loop): Likewise.
gdb/gdbserver:
2017-11-22 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (prepare_resume_reply): Use memcpy.
|
|
When debugging a program using a ravenscar runtime, the thread
layer sometimes gets confused, and even missing some threads.
This was traced to an assumption that ravenscar_wait was making,
which is that calling the "to_wait" target_ops method would
set the inferior_ptid, so that we could then use that assumption
to update our thread_list and current ptid. However, this has not
been the case for quite a while now. This patch fixes the problem
by assigning inferior_ptid the ptid returned by "to_wait".
gdb/ChangeLog:
* ravenscar-thread.c (ravenscar_wait): Update inferior ptid
with event ptid from the lower layer before doing the
ravenscar-specific update.
|
|
Connecting to a TSIM simulator over the remote protocol causes GDB
to crash with the following failed assertion:
(gdb) tar remote :1234
Remote debugging using :1234
/[...]/gdb/ravenscar-thread.c:182: internal-error: ravenscar_update_inferior_ptid: Assertion `!is_ravenscar_task (inferior_ptid)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) y
What happens is the following. Upon connection to the target, GDB
sends a 'qfThreadInfo' query, which is the query asking the target
for the ID of the first thread, and TSIM replies 'm0':
Sending packet: $qfThreadInfo#bb...Ack
Packet received: m0
As a result of this, GDB takes the '0' as the TID, and because of it,
constructs a ptid whose value is {42000, 0, 0}. This trips our
!is_ravenscar_task check, because all it does to identify threads
corresponding to ravenscar tasks is that their lwp is null, because
that's how we construct their ptid.
But this is unfortunatly not sufficient when debugging with TSIM,
because the thread ID that TSIM returns causes the creation of
a ptid whose lwp is zero, which matches the current identification
scheme and yet is clearly not a ravenscar task.
The fix is to also make sure that the ptid's tid field is nonzero.
gdb/ChangeLog:
* ravenscar-thread.c (is_ravenscar_task): Also verify that
the ptid's TID is nonzero.
|
|
Trying to debug a program using a stripped version of the ravenscar
runtime, we can get the following error:
(gdb) cont
Continuing.
Cannot find Ada_Task_Control_Block type. Aborting
This is because the ravenscar-thread layer makes the assumption that
the runtime is built the way we expect it, meaning that the Ada tasking
units we rely on for Ada tasking debugging, are built with debugging
information, and that this debug information has not been stripped from
the runtime.
When this assumption is not true, resuming such a program can trigger
the error above, which then leads GDB a little confused. For instance,
we can see things like:
(gdb) bt
Target is executing.
This patch fixes the issue by disabling the ravenscar thread layer
if we detect that the runtime is missing some of the debugging info
we need in order to support Ada task debugging. This is the best
we can do, as the ravenscar-thread layer actually depends on the
ada-tasks layer to implement thread debugging.
gdb/ChangeLog:
* ada-lang.h (ada_get_tcb_types_info): Add declaration.
* ada-tasks.c (ada_get_tcb_types_info): Renames get_tcb_types_info.
Make non-static. Change return type to char *. Adjust code
accordingly. Rewrite the function's documentation.
(read_atcb): Adjust call to get_tcb_types_info accordingly.
* ravenscar-thread.c (ravenscar_inferior_created): Check that
we have enough debugging information in the runtime to support
Ada task debugging before we enable the ravenscar-thread layer.
|
|
This patch reworks the ravenscar-thread layer to remove the
assumption that the target only has 1 CPU. In particular,
when connected to a QEMU target over the remote protocol,
QEMU reports each CPU as one thread. This patch adapts
the ravenscar-thread layer to this, and adds a large comment
explaining the general design of this unit.
gdb/ChangeLog:
* ada-lang.h (ada_get_task_info_from_ptid): Add declaration.
* ada-tasks.c (ada_get_task_info_from_ptid): New function.
* ravenscar-thread.c: Add into comment.
(base_magic_null_ptid): Delete.
(base_ptid): Change documentation.
(ravenscar_active_task): Renames ravenscar_running_thread.
All callers updated throughout.
(is_ravenscar_task, ravenscar_get_thread_base_cpu): New function.
(ravenscar_task_is_currently_active): Likewise.
(get_base_thread_from_ravenscar_task): Ditto.
(ravenscar_update_inferior_ptid): Adjust to handle multiple CPUs.
(ravenscar_runtime_initialized): Likewise.
(get_running_thread_id): Add new parameter "cpu". Adjust
implementation to handle this new parameter.
(ravenscar_fetch_registers): Small adjustment to use
is_ravenscar_task and ravenscar_task_is_currently_active in
order to decide whether to use the target beneath or this
module's arch_ops.
(ravenscar_store_registers, ravenscar_prepare_to_store): Likewise.
(ravenscar_stopped_by_sw_breakpoint): Use
get_base_thread_from_ravenscar_task to get the underlying
thread, rather than using base_ptid.
(ravenscar_stopped_by_hw_breakpoint, ravenscar_stopped_by_watchpoint)
(ravenscar_stopped_data_address, ravenscar_core_of_thread):
Likewise.
(ravenscar_inferior_created): Do not set base_magic_null_ptid.
|
|
At the user level, this patch enhances the debugger to print the ID
of the base CPU a task is running on:
(gdb) info task 3
Ada Task: 0x13268
Name: raven1
Thread: 0x13280
LWP: 0
!!!-> Base CPU: 1
No parent
Base Priority: 127
State: Runnable
This new field is only printed when the base CPU is nonzero or, in
other words, if the base CPU info is being provided by the runtime.
For instance, on native systems, where threads/processes can "jump"
from CPU to CPU, the info is not available, and the output of the
command above then remains unchanged.
At the internal level, the real purpose of this change is to prepare
the way for ravenscar-thread to start handling SMP systems. For that,
we'll need to know which CPU each task is running on... More info
on that in the commit that actually adds support for it.
gdb/ChangeLog:
* ada-lang.h (struct ada_task_info) <base_cpu>: New field.
* ada-lang.c (struct atcb_fieldno) <base_cpu>: New field.
(get_tcb_types_info): Set fieldnos.base_cpu.
(read_atcb): Set task_info->base_cpu.
(info_task): Print "Base CPU" info if set by runtime.
|
|
We have noticed a regression in our watchpoint support when debugging
through the remote protocol a program running on a bare metal platform,
when the program uses what we call the Ravenscar Runtime.
This runtime is a subset of the Ada runtime defined by the Ravenscar
Profile. One of the nice things about this runtime is that it provides
tasking, which is equivalent to the concept of threads in C (it is
actually often mapped to threads, when available). For bare metal
targets, however, there is no OS, and therefore no thread layer.
What we did, then, was add a ravenscar-thread layer, which has insider
knowledge of the runtime to get the list of threads, but also all
necessary info to perform thread switching.
For the record, the commit which caused the regression is:
commit 799a2abe613be0645b84f5aaa050f2f91e6ae3f7
Date: Mon Nov 30 16:05:16 2015 +0000
Subject: remote: stop reason and watchpoint data address per thread
Running local-watch-wrong-thread.exp with "maint set target-non-stop
on" exposes that gdb/remote.c only records whether the target stopped
for a breakpoint/watchpoint plus the watchpoint data address *for the
last reported remote event*. But in non-stop mode, we need to keep
that info per-thread, as each thread can end up with its own
last-status pending.
Our testcase is very simple. We have a package defining a global
variable named "Watch"...
package Pck is
Watch : Integer := 1974;
end Pck;
... and a main subprogram which changes its value
procedure Foo is
begin
Pck.Watch := Pck.Watch + 1;
end Foo;
To reproduce, we built our program as usual, started it in QEMU,
and then connected GDB to QEMU...
(gdb) target remote :4444
(gdb) break _ada_foo
(gdb) cont <--- this is to make sure the program is started
and the variable we want to watch is initialized
... at which point we try to use a watchpoint on our global variable:
(gdb) watch watch
... but, upon resuming the execution with a "cont", we expected to
get a watchpoint-hit notification, such as...
(gdb) cont
Hardware watchpoint 2: watch
Old value = 1974
New value = 1975
0xfff00258 in foo () at /[...]/foo.adb:6
6 end Foo;
... but unfortunately, we get a SIGTRAP instead:
(gdb) cont
Program received signal SIGTRAP, Trace/breakpoint trap.
foo () at /[...]/foo.adb:6
6 end Foo;
What happens is that, on the one hand, the change in remote.c
now stores the watchpoint-hit notification info in the thread
that received it; and on the other hand, we have a ravenscar-thread
layer which manages the thread list on top of the remote protocol
layer. The two of them get disconnected, and this eventually results
in GDB not realizing that we hit a watchpoint. Below is how:
First, once connected and just before inserting our watchpoint,
we have the ravenscar-thread layer which built the list of threads
by extracting some info from inferior memory, giving us the following
two threads:
(gdb) info threads
Id Target Id Frame
1 Thread 0 "0Q@" (Ravenscar task) foo () at /[...]/foo.adb:5
* 2 Thread 0x24618 (Ravenscar task) foo () at /[...]/foo.adb:5
The first thread is the only thread QEMU told GDB about. The second
one is a thread that the ravenscar-thread added. QEMU has now way
to know about those threads, since they are really embedded inside
the program; that's why we have the ravenscar layer, which uses
inside-knowledge to extract the list of threads.
Next, we insert a watchpoint, which applies to all threads. No problem
so far.
Then, we continue; meaning that GDB sends a Z2 packet to QEMU to
get the watchpoint inserted, then a vCont to resume the program's
execution. The program hits the watchpoints, and thererfore QEMU
reports it back:
Packet received: T05thread:01;watch:000022c4;
Since QEMU knows about one thread and one thread only, it stands
to reason that it would say that the event applies to thread:01,
which is our first thread in the "info threads" listing. That
thread has a ptid of {42000, lwp=1, tid=0}.
This is where Pedro's change kicks in: Seeing this event, and
having determined that the event was reported for thread 01,
and therefore ptid {42000, lwp=1, tid=0}, it saves the watchpoint-hit
event info in the private area of that thread/ptid. Once this is
done, remote.c's event-wait layer returns.
Enter the ravenscar-thread layer of the event-wait, which does
a little dance to delegate the wait to underlying layers with
ptids that those layers know about, and then when the target_beneath's
to_wait is done, tries to figure out which thread is now the active
thread. The code looks like this:
1. inferior_ptid = base_ptid;
2. beneath->to_wait (beneath, base_ptid, status, 0);
3. [...]
4. ravenscar_update_inferior_ptid ();
5.
6. return inferior_ptid;
Line 1 is where we reset inferior_ptid to the ptid that
the target_beneath layer knows about, allowing us to then
call its to_wait implementation (line 2). And then, upon
return, we call ravenscar_update_inferior_ptid, which reads
inferior memory to determine which thread is actually active,
setting inferior_ptid accordingly. Then we return that
inferior_ptid (which, again, neither QEMU and therefore nor
the remote.c layer knows about).
Upon return, we eventually arrive to the part where we try
to handle the inferior event: we discover that we got a SIGTRAP
and, as part of its handling, we call watchpoints_triggered,
which calls target_stopped_by_watchpoint, which eventually
remote_stopped_by_watchpoint, where Pedro's change kicks in
again:
struct thread_info *thread = inferior_thread ();
return (thread->priv != NULL
&& thread->priv->stop_reason == TARGET_STOPPED_BY_WATCHPOINT);
Because the ravenscar-thread layer changed the inferior_ptid
to the ptid of the active thread, inferior_thread now returns
the private data of that thread. This is not the thread that
QEMU reported the watchpoint-hit on, and thus, the function
returns "no watchpoint hit, mister". Hence GDB not understanding
the SIGTRAP, thus reporting it verbatim.
The way we chose to fix the issue is by making sure that the
ravenscar-thread layer doesn't let the remote layer be called
with inferior_ptid being set to a thread that the remote layer
does not know about.
gdb/ChangeLog:
* ravenscar-thread.c (ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint, ravenscar_stopped_by_watchpoint)
(ravenscar_stopped_data_address, ravenscar_core_of_thread):
New functions.
(init_ravenscar_thread_ops): Set the to_stopped_by_sw_breakpoint,
to_stopped_by_hw_breakpoint, to_stopped_by_watchpoint,
to_stopped_data_address and to_core_of_thread fields of
ravenscar_ops.
|
|
Current versions of GCC support switching the format used for "long double"
to either IBM double double or IEEE-128. The resulting binary is marked
via different setting of the Tag_GNU_Power_ABI_FP GNU attribute.
This patch checks this attribute to detect the format of the default
"long double" type and sets GDB's notion of the format accordingly.
The patch also adds support for the "__ibm128" type, which always uses
IBM double double format independent of the format used for "long double".
A new test case verifies that all three types, "long double", "__float128",
and "__ibm128" are correctly detected in all three compiler settings,
the default setting, -mabi=ieeelongdouble, and -mabi=ibmlongdouble.
gdb/ChangeLog:
2017-11-21 Ulrich Weigand <uweigand@de.ibm.com>
* ppc-tdep.h (enum powerpc_long_double_abi): New data type.
(struct gdbarch_tdep): New member long_double_abi.
* rs6000-tdep.c (rs6000_gdbarch_init): Initialize long_double_abi
member of tdep struct based on Tag_GNU_Power_ABI_FP attribute.
* ppc-linux-tdep.c (ppc_linux_init_abi): Install long double data
format depending on long_double_abi tdep member.
(ppc_floatformat_for_type): Handle __ibm128 type.
gdb/testsuite/ChangeLog:
2017-11-21 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.arch/ppc-longdouble.exp: New file.
* gdb.arch/ppc-longdouble.c: Likewise.
|
|
This new testcase has a test that fails like this here:
$1 = (<data variable, no debug info> *) 0x60208c <some_minsym>
(gdb) FAIL: gdb.ada/minsyms.exp: print &some_minsym
The problem is that the testcase hardcodes an expected address for the
"some_minsym" variable, which obviously isn't stable.
Fix that by expecting $hex instead.
gdb/testsuite/ChangeLog:
2017-11-21 Pedro Alves <palves@redhat.com>
* gdb.ada/minsyms.exp: Accept any address for 'some_minsym'.
|
|
Fix:
/Users/simark/src/binutils-gdb/gdb/darwin-nat.c:2404:3: error: no matching function for call to 'add_setshow_boolean_cmd'
add_setshow_boolean_cmd ("mach-exceptions", class_support,
^~~~~~~~~~~~~~~~~~~~~~~
gdb/ChangeLog:
* darwin-nat.c (set_enable_mach_exceptions): Constify parameter.
|
|
Here we want to find where we'd insert "after", so we want
std::lower_bound, not std::upper_bound.
gdb/ChangeLog:
2017-11-21 Pedro Alves <palves@redhat.com>
* dwarf2read.c (mapped_index::find_name_components_bounds)
<completion mode, upper bound>: Use std::lower_bound instead of
std::upper_bound.
(test_mapped_index_find_name_component_bounds): Remove incorrect
"t1_fund" from expected symbols.
|
|
This commit factors out the name-components-vector building and bounds
searching out of dw2_expand_symtabs_matching_symbol into separate
functions, and adds unit tests that:
- expose both the latent bug mentioned in the previous commit, and
also,
- for completeness exercise the 0xff character handling fixed in the
previous commit more directly.
The actual fix for the now-exposed bug is left for the following
patch.
gdb/ChangeLog:
2017-11-21 Pedro Alves <palves@redhat.com>
* dwarf2read.c (mapped_index::name_components_casing): New field.
(mapped_index) <build_name_components,
find_name_components_bounds): Declare new methods.
(mapped_index::find_name_components_bounds)
(mapped_index::build_name_components): New methods, factored out
from dw2_expand_symtabs_matching_symbol.
(check_find_bounds_finds)
(test_mapped_index_find_name_component_bounds): New.
(run_test): Rename to ...
(test_dw2_expand_symtabs_matching_symbol): ... this.
(run_test): Reimplement.
|
|
The find-upper-bound-for-completion algorithm in the name components
accelerator table in dwarf2read.c increments a char in a string, and
asserts that it's not incrementing a 0xff char, but that's incorrect.
First, we shouldn't be calling gdb_assert on input.
Then, if "char" is signed, comparing a caracther with "0xff" will
never yield true, which is caught by Clang with:
error: comparison of constant 255 with expression of type '....' (aka 'char') is always true [-Werror,-Wtautological-constant-out-of-range-compare]
gdb_assert (after.back () != 0xff);
~~~~~~~~~~~~~ ^ ~~~~
And then, 0xff is a valid character on non-UTF-8/ASCII character sets.
E.g., it's 'ÿ' in Latin1. While GCC nor Clang support !ASCII &&
!UTF-8 characters in identifiers (GCC supports UTF-8 characters only
via UCNs, see https://gcc.gnu.org/onlinedocs/cpp/Character-sets.html),
but other compilers might (Visual Studio?), so it doesn't hurt to
handle it correctly. Testing is covered by extending the
dw2_expand_symtabs_matching unit tests with relevant cases.
However, without further changes, the unit tests still fail... The
problem is that cp-name-parser.y assumes that identifiers are ASCII
(via ISALPHA/ISALNUM). This commit fixes that too, so that we can
unit test the dwarf2read.c changes. (The regular C/C++ lexer in
c-lang.y needs a similar treatment, but I'm leaving that for another
patch.)
While doing this, I noticed a thinko in the computation of the upper
bound for completion in dw2_expand_symtabs_matching_symbol. We're
using std::upper_bound but we should use std::lower_bound. I extended
the unit test with a case that I thought would expose it, this one:
+ /* These are used to check that the increment-last-char in the
+ matching algorithm for completion doesn't match "t1_fund" when
+ completing "t1_func". */
+ "t1_func",
+ "t1_func1",
+ "t1_fund",
+ "t1_fund1",
The algorithm actually returns "t1_fund1" as lower bound, so "t1_fund"
matches incorrectly. But turns out the problem is masked because
later here:
for (;lower != upper; ++lower)
{
const char *qualified = index.symbol_name_at (lower->idx);
if (!lookup_name_matcher.matches (qualified)
the lookup_name_matcher.matches check above filters out "t1_fund"
because that doesn't start with "t1_func".
I'll fix the latent bug in follow up patches, after factoring things
out a bit in a way that allows unit testing the relevant code more
directly.
gdb/ChangeLog:
2017-11-21 Pedro Alves <palves@redhat.com>
* cp-name-parser.y (cp_ident_is_alpha, cp_ident_is_alnum): New.
(symbol_end): Use cp_ident_is_alnum.
(yylex): Use cp_ident_is_alpha and cp_ident_is_alnum.
* dwarf2read.c (make_sort_after_prefix_name): New function.
(dw2_expand_symtabs_matching_symbol): Use it.
(test_symbols): Add more symbols.
(run_test): Add tests.
|
|
The gdb.base/whatis-ptype-typedefs.exp testcase has several tests that
fail on 32-bit architectures. E.g., on 'x86-64 -m32', I see:
...
FAIL: gdb.base/whatis-ptype-typedefs.exp: lang=c: cast: whatis (float_typedef) v_uchar_array_t_struct_typedef (invalid)
FAIL: gdb.base/whatis-ptype-typedefs.exp: lang=c: cast: ptype (float_typedef) v_uchar_array_t_struct_typedef (invalid)
...
gdb.log:
(gdb) whatis (float_typedef) v_uchar_array_t_struct_typedef
type = float_typedef
(gdb) FAIL: gdb.base/whatis-ptype-typedefs.exp: lang=c: cast: whatis (float_typedef) v_uchar_array_t_struct_typedef (invalid)
As Simon explained [1], the issue boils down to the fact that on
64-bit, this is an invalid cast:
(gdb) p (float_typedef) v_uchar_array_t_struct_typedef
Invalid cast.
while on 32 bits it is valid:
(gdb) p (float_typedef) v_uchar_array_t_struct_typedef
$1 = 1.16251721e-41
The expression basically tries to cast an array (which decays to a
pointer) to a float. The cast works on 32 bits because a float and a
pointer are of the same size, and value_cast works in that case:
~~~
More general than a C cast: accepts any two types of the same length,
and if ARG2 is an lvalue it can be cast into anything at all. */
~~~
On 64 bits, they are not the same size, so it ends throwing the
"Invalid cast" error.
The testcase is expecting the invalid cast behavior, thus the FAILs.
A point of these tests was to cover as many code paths in value_cast
as possible, as a sort of documentation of the current behavior:
# The main idea here is testing all the different paths in the
# value casting code in GDB (value_cast), making sure typedefs are
# preserved.
...
# We try all combinations, even those that don't parse, or are
# invalid, to catch the case of a regression making them
# inadvertently valid. For example, these convertions are
# invalid:
...
In that spirit, this commit makes the testcase adjust itself depending
on size of floats and pointers, and also test floats of different
sizes.
Passes cleanly on x86-64 GNU/Linux both -m64/-m32.
[1] - https://sourceware.org/ml/gdb-patches/2017-11/msg00382.html
gdb/ChangeLog:
2017-11-20 Pedro Alves <palves@redhat.com>
* gdb.base/whatis-ptype-typedefs.c (double_typedef)
(long_double_typedef): New typedefs.
Use DEF on double and long double.
* gdb.base/whatis-ptype-typedefs.exp: Add double and long double
cases.
(run_tests): New 'float_ptr_same_size', 'double_ptr_same_size',
and 'long_double_ptr_same_size' locals. Use them to decide
whether cast from array/function to float is valid/invalid.
|
|
Replace with for_each_thread.
gdb/gdbserver/ChangeLog:
* linux-low.c (kill_one_lwp_callback): Return void, take
argument directly, don't filter on pid.
(linux_kill): Use for_each_thread.
|
|
Replace with find_thread.
gdb/gdbserver/ChangeLog:
* linux-low.c (need_step_over_p): Return bool, remove dummy
argument.
(linux_resume, proceed_all_lwps): Use find_thread.
|
|
Replace with find_thread. Instead of setting the flag in the callback,
make the callback return true/false, and check the result against NULL
in the caller.
gdb/gdbserver/ChangeLog:
* linux-low.c (resume_status_pending_p): Return bool, remove
flag_p argument.
(linux_resume): Use find_thread.
|
|
Replace it with for_each_thread.
gdb/gdbserver/ChangeLog:
* linux-low.c (struct thread_resume_array): Remove.
(linux_set_resume_request): Return void, take arguments
directly.
(linux_resume): Use for_each_thread.
|
|
Simply replace with find_thread.
gdb/gdbserver/ChangeLog:
* linux-low.c (stuck_in_jump_pad_callback): Change prototype,
return bool, remove data argument.
(linux_stabilize_threads): Use find_thread.
|
|
Replace with for_each_thread. I inlined unsuspend_one_lwp in
unsuspend_all_lwps, since it is very simple.
gdb/gdbserver/ChangeLog:
* linux-low.c (unsuspend_one_lwp): Remove.
(unsuspend_all_lwps): Use for_each_thread, inline code from
unsuspend_one_lwp.
|
|
Replace find_inferior with find_thread. Since it may be useful in the
future, I added another overload to find_thread which filters based on a
ptid (using ptid_t::matches), so now iterate_over_lwps doesn't have to
do the filtering itself. iterate_over_lwps_filter is removed and
inlined into iterate_over_lwps.
gdb/gdbserver/ChangeLog:
* gdbthread.h (find_thread): Add overload with ptid_t filter.
* linux-low.c (struct iterate_over_lwps_args): Remove.
(iterate_over_lwps_filter): Remove.
(iterate_over_lwps): Use find_thread.
|
|
Replace with for_each_thread, and inline code from
reset_lwp_ptrace_options_callback.
gdb/gdbserver/ChangeLog:
* linux-low.c (reset_lwp_ptrace_options_callback): Remove.
(linux_handle_new_gdb_connection): Use for_each_thread, inline
code from reset_lwp_ptrace_options_callback.
|
|
Replace two usages with the overload of for_each_thread that filters on
pid. It allows to simplify the callback a little bit.
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (struct update_registers_data): Remove.
(update_registers_callback): Return void, take arguments
directly, don't check thread's pid.
(arm_insert_point, arm_remove_point): Use for_each_thread.
|
|
Replace with for_each_thread.
gdb/gdbserver/ChangeLog:
* win32-low.c (continue_one_thread): Return void, take argument
directly.
(child_continue): Use for_each_thread.
|
|
Straightforward replacement of find_inferior with the overload of
for_each_thread that filters on pid. I am able to build-test this
patch, but not run it.
gdb/gdbserver/ChangeLog:
* win32-i386-low.c (update_debug_registers_callback): Rename
to ...
(update_debug_registers): ... this, return void, remove pid_p arg.
(x86_dr_low_set_addr, x86_dr_low_set_control): Use for_each_thread.
|
|
This changes struct symbol to use an enum to encode the concrete
subclass of a particular symbol. Note that "enum class" doesn't work
properly with bitfields, so a plain enum is used.
2017-11-17 Tom Tromey <tom@tromey.com>
* symtab.h (enum symbol_subclass_kind): New.
(struct symbol) <is_cplus_template_function, is_rust_vtable>:
Remove.
<subclass>: New member.
(SYMBOL_IS_CPLUS_TEMPLATE_FUNCTION): Update.
* rust-lang.c (rust_get_trait_object_pointer): Update.
* dwarf2read.c (read_func_scope): Update.
(read_variable): Update.
|
|
This changes template_symbol to derive from symbol, which seems a bit
cleaner; and also more consistent with rust_vtable_symbol.
2017-11-17 Tom Tromey <tom@tromey.com>
* dwarf2read.c (read_func_scope): Update.
* symtab.h (struct template_symbol): Derive from symbol.
<base>: Remove.
|
|
In Rust, virtual tables work a bit differently than they do in C++. In
C++, as you know, they are connected to a particular class hierarchy.
Rust, instead, can generate a virtual table for potentially any type --
in fact, one such virtual table for each trait (a trait is similar to an
abstract class or to a Java interface) that a type implements.
Objects that are referenced via a trait can't currently be inspected by
gdb. This patch implements the Rust equivalent of "set print object".
gdb relies heavily on the C++ ABI to decode virtual tables; primarily to
make "set print object" work; but also "info vtbl". However, Rust does
not currently have a specified ABI, so this approach seems unwise to
emulate.
Instead, I've changed the Rust compiler to emit some DWARF that
describes trait objects (previously their internal structure was
opaque), vtables (currently just a size -- but I hope to expand this in
the future), and the concrete type for which a vtable was emitted.
The concrete type is expressed as a DW_AT_containing_type on the
vtable's type. This is a small extension to DWARF.
This patch adds a new entry to quick_symbol_functions to return the
symtab that holds a data address. Previously there was no way in gdb to
look up a full (only minimal) non-text symbol by address. The psymbol
implementation of this method works by lazily filling in a map that is
added to the objfile. This avoids slowing down psymbol reading for a
feature that is likely to not be used too frequently.
I did not update .gdb_index. My thinking here is that the DWARF 5
indices will obsolete .gdb_index soon-ish, meaning that adding a new
feature to them is probably wasted work. If necessary I can update the
DWARF 5 index code when it lands in gdb.
Regression tested on x86-64 Fedora 25.
2017-11-17 Tom Tromey <tom@tromey.com>
* symtab.h (struct symbol) <is_rust_vtable>: New member.
(struct rust_vtable_symbol): New.
(find_symbol_at_address): Declare.
* symtab.c (find_symbol_at_address): New function.
* symfile.h (struct quick_symbol_functions)
<find_compunit_symtab_by_address>: New member.
* symfile-debug.c (debug_qf_find_compunit_symtab_by_address): New
function.
(debug_sym_quick_functions): Link to
debug_qf_find_compunit_symtab_by_address.
* rust-lang.c (rust_get_trait_object_pointer): New function.
(rust_evaluate_subexp) <case UNOP_IND>: New case. Call
rust_get_trait_object_pointer.
* psymtab.c (psym_relocate): Clear psymbol_map.
(psym_fill_psymbol_map, psym_find_compunit_symtab_by_address): New
functions.
(psym_functions): Link to psym_find_compunit_symtab_by_address.
* objfiles.h (struct objfile) <psymbol_map>: New member.
* dwarf2read.c (dwarf2_gdb_index_functions): Update.
(process_die) <DW_TAG_variable>: New case. Call read_variable.
(rust_containing_type, read_variable): New functions.
2017-11-17 Tom Tromey <tom@tromey.com>
* gdb.rust/traits.rs: New file.
* gdb.rust/traits.exp: New file.
|
|
Now that all its usages are removed, we can get rid of DEF_VEC_I (int).
gdb/ChangeLog:
* common/gdb_vecs.h (DEF_VEC_I (int)): Remove.
|
|
This patch makes the syscalls_to_catch field of process_info an
std::vector<int>. The process_info structure must now be
newed/deleted.
In handle_extended_wait, the code that handles exec events destroys the
existing process_info and creates a new one. It moves the content of
syscalls_to_catch from the old to the new vector. I used std::move for
that (through an intermediary variable), which should have the same
behavior as the old code.
gdb/gdbserver/ChangeLog:
* inferiors.h (struct process_info): Add constructor, initialize
fields..
<syscalls_to_catch>: Change type to std::vector<int>.
* inferiors.c (add_process): Allocate process_info with new.
(remove_process): Free process_info with delete.
* linux-low.c (handle_extended_wait): Adjust.
(gdb_catching_syscalls_p, gdb_catch_this_syscall_p): Adjust.
* server.c (handle_general_set): Adjust.
|
|
Simple replacement of VEC with std::vector.
gdb/ChangeLog:
* common/filestuff.c: Include <algorithm>.
(open_fds): Change type to std::vector<int>.
(do_mark_open_fd): Adjust.
(unmark_fd_no_cloexec): Adjust.
(do_close): Adjust.
|
|
A simple replacement of VEC with std::vector.
gdb/ChangeLog:
* breakpoint.c (output_thread_groups): Take an std::vector.
(print_one_breakpoint_location): Adjust.
|
|
Consider a program which provides a symbol without debugging
information. For instance, compiling the following code without -g:
Some_Minimal_Symbol : Integer := 1234;
pragma Export (C, Some_Minimal_Symbol, "some_minsym");
Trying to print this variable with GDB now causes an error, which
is now expected:
(gdb) p some_minsym
'some_minsym' has unknown type; cast it to its declared type
However, trying to cast this symbol, or to take its address
does not work:
(gdb) p integer(some_minsym)
'some_minsym' has unknown type; cast it to its declared type
(gdb) p &some_minsym
'some_minsym' has unknown type; cast it to its declared type
Another manisfestation of this issue can be seen when trying to
insert an Ada exception catchpoint for a specific standard exception
(this only occurs if the Ada runtime is built without debugging
information, which is the default). For instance:
$ (gdb) catch exception constraint_error
warning: failed to reevaluate internal exception condition for catchpoint 0: 'constraint_error' has unknown type; cast it to its declared type
This is because, internally, the cachtpoint uses a condition referencing
a minimal symbol, more precisely:
long_integer (e) = long_integer (&constraint_error)
This patch fixes all issues listed above:
1. resolve_subexp: Special-case the handling of OP_VAR_MSYM_VALUE
expression elements, where there are no ambiguities to be resolved
in that situation;
2. ada_evaluate_subexp: Enhance the handling of the UNOP_CAST
handling so as to process the case where the target of
the cast is a minimal symbol (as well as a symbol with debugging
information). This mimics what's done in C.
gdb/ChangeLog:
* ada-lang.c (resolve_subexp): Add handling of OP_VAR_MSYM_VALUE.
(ada_evaluate_subexp_for_cast): New function.
(ada_evaluate_subexp) <UNOP_CAST>: Replace code by call to
ada_evaluate_subexp_for_cast.
(ada_evaluate_subexp) <nosideret>: Replace code by call to
eval_skip_value.
* eval.c (evaluate_var_value): Make non-static.
(evaluate_var_msym_value, eval_skip_value): Likewise.
* value.h (evaluate_var_value, evaluate_var_msym_value)
(eval_skip_value): Declare.
gdb/testsuite/ChangeLog:
* gdb.ada/minsyms: New testcase.
Tested on x86_64-linux. No regression. Fixes the following failures:
catch_ex.exp: continuing to Program_Error exception
catch_ex.exp: continuing to failed assertion
catch_ex.exp: continuing to unhandled exception
catch_ex.exp: continuing to program completion
complete.exp: p <Exported_Capitalized>
complete.exp: p Exported_Capitalized
complete.exp: p exported_capitalized
mi_catch_ex.exp: catch Program_Error (unexpected output)
mi_catch_ex.exp: continue to exception catchpoint hit (unknown output after running)
mi_catch_ex.exp: continue to assert failure catchpoint hit (unknown output after running)
mi_catch_ex.exp: continue to unhandled exception catchpoint hit (unknown output after running)
mi_ex_cond.exp: catch C_E if i = 2 (unexpected output)
|
