| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently the stop_pc field of thread_suspect_state is a CORE_ADDR and
when we want to indicate that there is no stop_pc available we set
this field back to a special value.
There are actually two special values used, in post_create_inferior
the stop_pc is set to 0. This is a little unfortunate, there are
plenty of embedded targets where 0 is a valid pc value. The more
common special value for stop_pc though, is set in
thread_info::set_executing, where the value (~(CORE_ADDR) 0) is used.
This commit changes things so that the stop_pc is instead a
gdb::optional. We can now explicitly reset the field to an
uninitialised state, we also have asserts that we don't read the
stop_pc when its in an uninitialised state (both in
gdbsupport/gdb_optional.h, when compiling with _GLIBCXX_DEBUG
defined, and in thread_info::stop_pc).
One situation where a thread will not have a stop_pc value is when the
thread is stopped as a consequence of GDB being in all stop mode, and
some other thread stopped at an interesting event. When GDB brings
all the other threads to a stop those other threads will not have a
stop_pc set (thus avoiding an unnecessary read of the pc register).
Previously, when GDB passed through handle_one (in infrun.c) the
threads executing flag was set to false and the stop_pc field was left
unchanged, i.e. it would (previous) have been left as ~0.
Now, handle_one leaves the stop_pc with no value.
This caused a problem when we later try to set these threads running
again, in proceed() we compare the current pc with the cached stop_pc.
If the thread was stopped via handle_one then the stop_pc would have
been left as ~0, and the compare (in proceed) would (likely) fail.
Now however, this compare tries to read the stop_pc when it has no
value and this would trigger an assert.
To resolve this I've added thread_info::stop_pc_p() which returns true
if the thread has a cached stop_pc. We should only ever call
thread_info::stop_pc() if we know that there is a cached stop_pc,
however, this doesn't mean that every call to thread_info::stop_pc()
needs to be guarded with a call to thread_info::stop_pc_p(), in most
cases we know that the thread we are looking at stopped due to some
interesting event in that thread, and so, we know that the stop_pc is
valid.
After running the testsuite I've seen no other situations where
stop_pc is read uninitialised.
There should be no user visible changes after this commit.
|
|
When building gdb on openSUSE Leap 42.3, we trigger the case that
CXX_STD_THREAD is undefined, and run into:
...
gdb/maint.c: In function 'void maintenance_show_worker_threads \
(ui_file*, int, cmd_list_element*, const char*)':
gdb/maint.c:877:14: error: 'gdb::thread_pool' has not been declared
gdb::thread_pool::g_thread_pool->thread_count ());
^
Makefile:1647: recipe for target 'maint.o' failed
make[1]: *** [maint.o] Error 1
...
Fix this by handling the undefined CXX_STD_THREAD case in
maintenance_show_worker_threads, such that we get:
...
$ gdb -q -batch -ex "maint show worker-thread"
The number of worker threads GDB can use is 0.
...
Tested on x86_64-linux.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28312
|
|
The sim side is already ready to go for cris, so wire it up.
|
|
The sim side is already ready to go for aarch64, so wire it up.
|
|
Moving all the sim settings to one section makes it easier to track,
and makes it easier to keep it aligned with the sim target tests.
The gdb logic was duplicating this when handling different OS targets
instead of having a single cpu check. Now it's more obvious that the
sim is tied to a cpu and not related to the OS.
|
|
Replace some of the manual string management (malloc/free) with
std::string when creating commands in utils.c.
Things are a little bit messy as, creating the prefix commands (using
add_basic_prefix_cmd and add_show_prefix_cmd), doesn't copy the doc
string, while creating the actual set/show commands (using
add_setshow_enum_cmd) does copy the doc string.
As a result, I have retained the use of xstrprintf when creating the
prefix command doc strings, but switched to using std::string when
creating the actual set/show commands.
There should be no user visible changes after this commit.
|
|
Change struct internal_problem (gdb/utils.c) to use bool instead of
int, update the 3 static instances of this structure that we create to
use true/false instead of 1/0.
I've also updated the comments on struct internal_problem as the
existing comment doesn't seem to be referring to the structure, it
talks about returning something, which doesn't make sense in this
context.
There should be no user visible changes after this commit.
|
|
Rename thread_info::executing to thread_info::m_executing, and make it
private. Add a new get/set member functions, and convert GDB to make
use of these.
The only real change of interest in this patch is in thread.c where I
have deleted the helper function set_executing_thread, and now just
use the new set function thread_info::set_executing. However, the old
helper function set_executing_thread included some code to reset the
thread's stop_pc, so I moved this code into the new function
thread_info::set_executing. However, I don't believe there is
anywhere that this results in a change of behaviour, previously the
executing flag was always set true through a call to
set_executing_thread anyway.
|
|
The guile API has (history-append! <value>) to add values into GDB's
history list. There is currently no equivalent in the Python API.
This commit adds gdb.add_history(<value>) to the Python API, this
function takes <value> a gdb.Value (or anything that can be passed to
the constructor of gdb.Value), and adds the value it represents to
GDB's history list. The index of the newly added value is returned.
|
|
When reverting commit 5a20fadc841 and using gdb_unload instead of runto "bar"
to trigger the internal-error in test-case
gdb.dwarf2/locexpr-data-member-location.exp, we run into:
...
ERROR: couldn't unload file in $gdb (timeout).
...
and the test-case takes about 1 minute.
Fix this by handling internal-error in gdb_unload, such that we have:
...
ERROR: Couldn't unload file in $gdb (GDB internal error).
ERROR: Could not resync from internal error (eof)
...
within 2 seconds.
Tested on x86_64-linux.
|
|
When reverting commit 5a20fadc841 the test-case
gdb.dwarf2/locexpr-data-member-location.exp fails like this:
...
FAIL: gdb.dwarf2/locexpr-data-member-location.exp: running to bar in runto \
(GDB internal error)
ERROR: Could not resync from internal error (eof)
...
and takes 1 minute to run.
The long running time is caused by running into a timeout in gdb_run_cmd, at
this point:
...
(gdb) run ^M
The program being debugged has been started already.^M
Start it from the beginning? (y or n) y^M
/home/vries/gdb_versions/devel/src/gdb/gdbtypes.c:5583: internal-error: \
Unexpected type field location kind: 4^M
A problem internal to GDB has been detected,^M
further debugging may prove unreliable.^M
Quit this debugging session? (y or n)
...
Fix this by detecting the internal-error in gdb_run_cmd. We don't handle it
in gdb_run_cmd, but stash the gdb output back into the buffer using
-notransfer, and let the caller proc runto deal with it.
After the fix, the test-case just takes 2 seconds.
Tested on x86_64-linux.
|
|
A previous commit added the
gdb.arch/riscv64-unwind-prologue-with-ld-lw.exp testcase, but one of its
associated file was named after a previous version of the test.
This commit fixes this and makes sure that all the files linked to this
testcase share the same prefix in the name.
Tested on riscv64 GNU/Linux.
|
|
Before commit 5a20fadc841 the test-case
gdb.dwarf2/locexpr-data-member-location.exp fails like this:
...
FAIL: gdb.dwarf2/locexpr-data-member-location.exp: running to bar in runto \
(GDB internal error)
ERROR: : spawn id exp9 not open
while executing
"expect {
-i exp9 -timeout 10
-re "Quit this debugging session\\? \\(y or n\\) $" {
send_gdb "n\n" answer
incr count
}
-re "Create ..."
("uplevel" body line 1)
invoked from within
"uplevel $body" NONE : spawn id exp9 not open
ERROR: Could not resync from internal error (timeout)
...
Fix the:
...
ERROR: : spawn id exp9 not open
...
by handling eof in gdb_internal_error_resync, such that we have instead:
...
FAIL: gdb.dwarf2/locexpr-data-member-location.exp: running to bar in runto \
(GDB internal error)
ERROR: Could not resync from internal error (eof)
...
Tested on x86_64-linux.
|
|
There are a few includes of complaints.h that aren't necessary. This
patch removes them. Tested by rebuilding.
|
|
The case for FIELD_LOC_KIND_DWARF_BLOCK was missing for
switch TYPE_FIELD_LOC_KIND. Thas caused an internal-error
under some circumstances.
Fixes bug 28030.
|
|
On a machine on Open Build Service I'm running into a SIGILL for test-case
gdb.arch/amd64-disp-step-avx.exp:
...
Program received signal SIGILL, Illegal instruction.^M
test_rip_vex2 () at gdb.arch/amd64-disp-step-avx.S:40^M
40 vmovsd ro_var(%rip),%xmm0^M
(gdb) FAIL: gdb.arch/amd64-disp-step-avx.exp: vex2: \
continue to test_rip_vex2_end
...
The SIGILL happens when trying to execute the first avx instruction in the
executable.
I can't directly access the machine, but looking at the log for test-case
gdb.arch/i386-avx.exp, it seems that there's no avx support:
...
Breakpoint 1, main (argc=1, argv=0x7fffffffd6b8) at gdb.arch/i386-avx.c:68^M
68 if (have_avx ())^M
(gdb) print have_avx ()^M
$1 = 0^M
...
Fix this by:
- adding a gdb_caching_proc have_avx, similar to have_mpx, using the have_avx
function from gdb.arch/i386-avx.c
- using proc have_avx in both gdb/testsuite/gdb.arch/amd64-disp-step-avx.exp
and gdb/testsuite/gdb.arch/i386-avx.exp.
Tested on my x86_64-linux laptop with avx support, where both test-cases pass.
gdb/testsuite/ChangeLog:
2021-09-04 Tom de Vries <tdevries@suse.de>
PR testsuite/26950
* gdb/testsuite/gdb.arch/i386-avx.c (main): Remove call to have_avx.
(have_avx): Move ...
* gdb/testsuite/lib/gdb.exp (have_avx): ... here. New proc.
* gdb/testsuite/gdb.arch/amd64-disp-step-avx.exp: Use have_avx.
* gdb/testsuite/gdb.arch/i386-avx.exp: Same.
|
|
On a Windows build locally, watchpoints started failing. I tracked
this down to x86_dr_low_get_addr returning an 'unsigned long'... in
this particular build, this is a 32-bit type, but the inferior is a
64-bit program.
This patch fixes the problem by changing the return type. No other
change is required, because this matches the function pointer in
struct x86_dr_low_type.
|
|
The original reproducer for PR28030 required use of a specific
compiler version - gcc-c++-11.1.1-3.fc34 is mentioned in the PR,
though it seems probable that other gcc versions might also be able to
reproduce the bug as well. This commit introduces a test case which,
using the DWARF assembler, provides a reproducer which is independent
of the compiler version. (Well, it'll work with whatever compilers
the DWARF assembler works with.)
To the best of my knowledge, it's also the first test case which uses
the DWARF assembler to provide debug info for a shared object. That
being the case, I provided more than the usual commentary which should
allow this case to be used as a template when a combo shared
library / DWARF assembler test case is required in the future.
I provide some details regarding the bug in a comment near the
beginning of locexpr-dml.exp.
This problem was difficult to reproduce; I found myself constantly
referring to the backtrace while trying to figure out what (else) I
might be missing while trying to create a reproducer. Below is a
partial backtrace which I include for posterity.
#0 internal_error (
file=0xc50110 "/ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/gdbtypes.c", line=5575,
fmt=0xc520c0 "Unexpected type field location kind: %d")
at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdbsupport/errors.cc:51
#1 0x00000000006ef0c5 in copy_type_recursive (objfile=0x1635930,
type=0x274c260, copied_types=0x30bb290)
at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/gdbtypes.c:5575
#2 0x00000000006ef382 in copy_type_recursive (objfile=0x1635930,
type=0x274ca10, copied_types=0x30bb290)
at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/gdbtypes.c:5602
#3 0x0000000000a7409a in preserve_one_value (value=0x24269f0,
objfile=0x1635930, copied_types=0x30bb290)
at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/value.c:2529
#4 0x000000000072012a in gdbscm_preserve_values (
extlang=0xc55720 <extension_language_guile>, objfile=0x1635930,
copied_types=0x30bb290)
at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/guile/scm-value.c:94
#5 0x00000000006a3f82 in preserve_ext_lang_values (objfile=0x1635930,
copied_types=0x30bb290)
at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/extension.c:568
#6 0x0000000000a7428d in preserve_values (objfile=0x1635930)
at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/value.c:2579
#7 0x000000000082d514 in objfile::~objfile (this=0x1635930,
__in_chrg=<optimized out>)
at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/objfiles.c:549
#8 0x0000000000831cc8 in std::_Sp_counted_ptr<objfile*, (__gnu_cxx::_Lock_policy)2>::_M_dispose (this=0x1654580)
at /usr/include/c++/11/bits/shared_ptr_base.h:348
#9 0x00000000004e6617 in std::_Sp_counted_base<(__gnu_cxx::_Lock_policy)2>::_M_release (this=0x1654580) at /usr/include/c++/11/bits/shared_ptr_base.h:168
#10 0x00000000004e1d2f in std::__shared_count<(__gnu_cxx::_Lock_policy)2>::~__shared_count (this=0x190bb88, __in_chrg=<optimized out>)
at /usr/include/c++/11/bits/shared_ptr_base.h:705
#11 0x000000000082feee in std::__shared_ptr<objfile, (__gnu_cxx::_Lock_policy)2>::~__shared_ptr (this=0x190bb80, __in_chrg=<optimized out>)
at /usr/include/c++/11/bits/shared_ptr_base.h:1154
#12 0x000000000082ff0a in std::shared_ptr<objfile>::~shared_ptr (
this=0x190bb80, __in_chrg=<optimized out>)
at /usr/include/c++/11/bits/shared_ptr.h:122
#13 0x000000000085ed7e in __gnu_cxx::new_allocator<std::_List_node<std::shared_ptr<objfile> > >::destroy<std::shared_ptr<objfile> > (this=0x114bc00,
__p=0x190bb80) at /usr/include/c++/11/ext/new_allocator.h:168
#14 0x000000000085e88d in std::allocator_traits<std::allocator<std::_List_node<std::shared_ptr<objfile> > > >::destroy<std::shared_ptr<objfile> > (__a=...,
__p=0x190bb80) at /usr/include/c++/11/bits/alloc_traits.h:531
#15 0x000000000085e50c in std::__cxx11::list<std::shared_ptr<objfile>, std::allocator<std::shared_ptr<objfile> > >::_M_erase (this=0x114bc00, __position=
std::shared_ptr<objfile> (expired, weak count 1) = {get() = 0x1635930})
at /usr/include/c++/11/bits/stl_list.h:1925
#16 0x000000000085df0e in std::__cxx11::list<std::shared_ptr<objfile>, std::allocator<std::shared_ptr<objfile> > >::erase (this=0x114bc00, __position=
std::shared_ptr<objfile> (expired, weak count 1) = {get() = 0x1635930})
at /usr/include/c++/11/bits/list.tcc:158
#17 0x000000000085c748 in program_space::remove_objfile (this=0x114bbc0,
objfile=0x1635930)
at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/progspace.c:210
#18 0x000000000082d3ae in objfile::unlink (this=0x1635930)
at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/objfiles.c:487
#19 0x000000000082e68c in objfile_purge_solibs ()
at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/objfiles.c:875
#20 0x000000000092dd37 in no_shared_libraries (ignored=0x0, from_tty=1)
at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/solib.c:1236
#21 0x00000000009a37fe in target_pre_inferior (from_tty=1)
at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/target.c:2496
#22 0x00000000007454d6 in run_command_1 (args=0x0, from_tty=1,
run_how=RUN_NORMAL)
at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/infcmd.c:437
I'll note a few points regarding this backtrace:
Frame #1 is where the internal error occurs. It's caused by an
unhandled case for FIELD_LOC_KIND_DWARF_BLOCK. The fix for this bug
adds support for this case.
Frame #22 - it's a partial backtrace - shows that GDB is attempting to
(re)run the program. You can see the exact command sequence that was
used for reproducing this problem in the PR (at
https://sourceware.org/bugzilla/show_bug.cgi?id=28030), but in a
nutshell, after starting the program and advancing to the appropriate
source line, GDB was asked to step into libstdc++; a "finish" command
was issued, returning a value. The fact that a value was returned is
very important. GDB was then used to step back into libstdc++. A
breakpoint was set on a source line in the library after which a "run"
command was issued.
Frame #19 shows a call to objfile_purge_solibs. It's aptly named.
Frame #7 is a call to the destructor for one of the objfile solibs; it
turned out to be the one for libstdc++.
Frames #6 thru #3 show various value preservation frames. If you look
at preserve_values() in gdb/value.c, the value history is preserved
first, followed by internal variables, followed by values for the
extension languages (python and guile).
|
|
When building gdb with "-Wall -O2 -g -flto=auto", I run into:
...
(gdb) call clear_complaints()^M
No symbol "clear_complaints" in current context.^M
(gdb) FAIL: gdb.gdb/complaints.exp: clear complaints
...
The problem is that lto has optimized away clear_complaints, and consequently
the selftests cannot run.
Fix this by:
- using info function to detect presence of clear_complaints
- handling the absence of clear_complaints by calling untested
...
(gdb) UNTESTED: gdb.gdb/complaints.exp: \
Cannot find clear_complaints, skipping test
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2021-09-03 Tom de Vries <tdevries@suse.de>
* gdb.gdb/complaints.exp: Use untested if clear_complaints cannot
be found.
|
|
Values of type _Float16 and _Float16 _Complex can now be used on CPUs with
AVX512-FP16 support. Return values of those types are located in XMM0.
Compiler support for gcc and clang is in progress, see e.g.:
https://gcc.gnu.org/pipermail/gcc-patches/2021-July/574117.html
gdb/ChangeLog:
2021-07-21 Felix Willgerodt <Felix.Willgerodt@intel.com>
* amd64-tdep.c (amd64_classify): Classify _Float16 and
_Float16 _Complex as AMD64_SSE.
* i386-tdep.c (i386_extract_return_value): Read _Float16 and
_Float16 _Complex from xmm0.
gdb/testsuite/ChangeLog:
2021-07-21 Felix Willgerodt <Felix.Willgerodt@intel.com>
* gdb.arch/x86-avx512fp16-abi.c: New file.
* gdb.arch/x86-avx512fp16-abi.exp: New file.
|
|
This adds support for the half datatype, FP16, to the AVX512 register printing.
gdb/ChangeLog:
2020-07-21 Felix Willgerodt <Felix.Willgerodt@intel.com>
* i386-tdep.c (i386_zmm_type) <v32_half>: New field.
(i386_ymm_type) <v16_half>: New field.
(i386_gdbarch_init): Add set_gdbarch_half_format.
* features/i386/64bit-avx512.xml: Add half type.
* features/i386/64bit-avx512.c: Regenerated.
* features/i386/64bit-sse.xml: Add half type.
* features/i386/64bit-sse.c: Regenerated.
gdb/testsuite/ChangeLog:
2021-07-21 Felix Willgerodt <Felix.Willgerodt@intel.com>
* gdb.arch/x86-avx512fp16.c: New file.
* gdb.arch/x86-avx512fp16.exp: New file.
* lib/gdb.exp (skip_avx512fp16_tests): New function.
|
|
Values of type bfloat16 can also be used on 32-bit targets, which was missed
in the original enablement. This also adjusts the testcase to pass with
"unix/-m32", where only the lower 8 AVX registers are available.
gdb/ChangeLog:
2021-07-21 Felix Willgerodt <Felix.Willgerodt@intel.com>
* features/i386/32bit-sse.xml: Add bfloat16 type.
* features/i386/32bit-sse.c: Regenerated.
gdb/testsuite/ChangeLog:
2021-07-21 Felix Willgerodt <Felix.Willgerodt@intel.com>
* gdb.arch/x86-avx512bf16.exp: Only use x/z/ymm 0-7.
|
|
When building gdb with "-Wall -O2 -g -flto=auto", I run into:
...
FAIL: gdb.gdb/python-helper.exp: breakpoint in captured_main \
(got interactive prompt)
FAIL: gdb.gdb/python-helper.exp: run until breakpoint at captured_main
WARNING: Couldn't test self
...
and similar in gdb.gdb/selftest.exp.
The first FAIL in more detail:
...
(gdb) break captured_main^M
Function "captured_main" not defined.^M
Make breakpoint pending on future shared library load? (y or [n]) n^M
(gdb) FAIL: gdb.gdb/python-helper.exp: breakpoint in captured_main \
(got interactive prompt)
...
The problem is that lto has optimized away the captured_main function
and consequently the selftests dependent on that cannot run.
Fix this by:
- using gdb_breakpoint to detect failure to set the breakpoint
- handling the failure to set a breakpoint by calling untested
- not emitting the warning if we've already got untested
such that we have:
...
(gdb) UNTESTED: gdb.gdb/python-helper.exp: Cannot set breakpoint at \
captured_main, skipping testcase.
...
gdb/testsuite/ChangeLog:
2021-09-02 Tom de Vries <tdevries@suse.de>
* lib/selftest-support.exp: Emit untested when not being able to set
breakpoint.
|
|
[ Using $build for /home/vries/gdb_versions/devel/build to make things a bit
more readable. ]
When using make check// to run test-case gdb.dwarf2/fission-base.exp:
...
( cd $build/gdb; make check//unix RUNTESTFLAGS="fission-base.exp" )
...
we run into:
...
(gdb) file \
$build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base^M
Reading symbols from \
$build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base...^M
warning: Could not find DWO CU \
$build/gdb/testsuite.1/outputs/gdb.dwarf2/fission-base/fission-base.dwo \
(0x807060504030201) referenced by CU at offset 0xc7 [in module \
$build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base]^M
...
The problem is that the executable refers to the dwo file using path name
$build/gdb/testsuite.1/outputs/gdb.dwarf2/fission-base/fission-base.dwo,
while the actual dwo file is at
$build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base.dwo.
This is caused by this trick in fission-base.S:
...
#define XSTR(s) STR(s)
#define STR(s) #s
...
.asciz XSTR(DWO) # DW_AT_GNU_dwo_name
...
and:
...
$ echo | gcc -E -dD - | grep "define unix"
...
I used this trick to avoid doing additional_flags=-DDWO=\"$dwo\", since I was
concerned that there could be quoting issues.
However, I've found other uses of this pattern, f.i. in
gdb/testsuite/gdb.base/corefile-buildid.exp:
...
additional_flags=-DSHLIB_NAME=\"$dlopen_lib\"]
...
So, fix this by:
- using additional_flags=-DDWO=\"$dwo\" and
- using plain DWO instead of XSTR(DWO)
Likewise in other gdb.dwarf2/fission*.exp test-cases.
Tested on x86_64-linux, using make check//unix.
gdb/testsuite/ChangeLog:
2021-09-01 Tom de Vries <tdevries@suse.de>
PR testsuite/28298
* gdb.dwarf2/fission-base.S: Use DWO instead of XSTR(DWO).
* gdb.dwarf2/fission-loclists-pie.S: Same.
* gdb.dwarf2/fission-loclists.S: Same.
* gdb.dwarf2/fission-reread.S: Same.
* gdb.dwarf2/fission-base.exp: Use additional_flags=-DDWO=\"$dwo\".
* gdb.dwarf2/fission-loclists-pie.exp: Same.
* gdb.dwarf2/fission-loclists.exp: Same.
* gdb.dwarf2/fission-reread.exp: Same.
|
|
On openSUSE Tumbleweed I ran into:
...
(gdb) ptype outstring_func.part^M
No symbol "outstring_func" in current context.^M
(gdb) FAIL: gdb.fortran/call-no-debug.exp: ptype outstring_func.part
...
while on openSUSE Leap 15.2 I have instead:
...
(gdb) ptype string_func_^M
type = <unknown return type> ()^M
(gdb) PASS: gdb.fortran/call-no-debug.exp: ptype string_func_
...
The difference is caused by the result for "info function string_func", which
is this for the latter:
...
(gdb) info function string_func^M
All functions matching regular expression "string_func":^M
^M
Non-debugging symbols:^M
0x000000000040089c string_func_^M
...
but this for the former:
...
(gdb) info function string_func^M
All functions matching regular expression "string_func":^M
^M
Non-debugging symbols:^M
0x00000000004012bb string_func_^M
0x00007ffff7bac5b0 outstring_func.part^M
0x00007ffff7bb1a00 outstring_func.part^M
...
The extra symbols are part of glibc:
...
$ nm /lib64/libc.so.6 | grep string_func
00000000000695b0 t outstring_func.part.0
000000000006ea00 t outstring_func.part.0
...
If glibc debug info is installed, we get instead:
...
(gdb) info function string_func^M
All functions matching regular expression "string_func":^M
^M
File /usr/src/debug/glibc-2.33-9.1.x86_64/stdio-common/vfprintf-internal.c:^M
236: static int outstring_func(int, size_t, const unsigned int *, FILE *);^M
^M
File vfprintf-internal.c:^M
236: static int outstring_func(int, size_t, const unsigned char *, FILE *);^M
^M
Non-debugging symbols:^M
0x00000000004012bb string_func_^M
...
and the FAIL doesn't trigger.
Fix this by calling "info function string_func" before starting the exec, such
that only symbols of the exec are taken into account.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2021-09-01 Tom de Vries <tdevries@suse.de>
* gdb.fortran/call-no-debug.exp: Avoid shared lib symbols for
find_mangled_name calls.
|
|
Remove breakpoint_find_if, replace its sole usage with using
all_breakpoints directly instead. At the same time, change return
types to use bool.
Change-Id: I9ec392236b4804b362d16ab563330b9c07311106
|
|
gdbfmt was already used for printf_filtered, so using it for
vprintf_filtered is more consistent.
As a result, all callers of vfprintf_maybe_filtered now use gdbfmt, so
the function can be simplified to assume the gdbfmt case and remove
the associated bool argument. Similary, vprintf_filtered is now a
simple wrapper around vfprintf_filtered.
|
|
The handler for 'info proc status' for native processes on FreeBSD
uses the 'j' size modifier along with uintmax_t / intmax_t casts to
output integer values for types such as off_t that are not aliases of
a basic C type such as 'int' or 'long'. printf_filtered does not
support the 'j' modifer, so this resulted in runtime errors in
practice:
(gdb) info proc stat
process 8674
Name: ls
State: T (stopped)
Parent process: 8673
Process group: 8674
Session id: 2779
Unrecognized format specifier 'j' in printf
Instead, use plongest and pulongest to generate the output strings of
these integer values.
|
|
We get this error when building GDB on some platforms. I get it using
g++-10 on Ubuntu 20.04 (installed using the distro package). It was
also reported by John Baldwin, using a clang that uses libc++.
CXX unittests/parallel-for-selftests.o
cc1plus: warning: command line option '-Wmissing-prototypes' is valid for C/ObjC but not for C++
/home/smarchi/src/binutils-gdb/gdb/unittests/parallel-for-selftests.c: In function 'void selftests::parallel_for::test(int)':
/home/smarchi/src/binutils-gdb/gdb/unittests/parallel-for-selftests.c:53:30: error: use of deleted function 'std::atomic<int>::atomic(const std::atomic<int>&)'
53 | std::atomic<int> counter = 0;
| ^
In file included from /usr/include/c++/9/future:42,
from /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/thread-pool.h:29,
from /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/parallel-for.h:26,
from /home/smarchi/src/binutils-gdb/gdb/unittests/parallel-for-selftests.c:22:
/usr/include/c++/9/atomic:755:7: note: declared here
755 | atomic(const atomic&) = delete;
| ^~~~~~
/usr/include/c++/9/atomic:759:17: note: after user-defined conversion: 'constexpr std::atomic<int>::atomic(std::atomic<int>::__integral_type)'
759 | constexpr atomic(__integral_type __i) noexcept : __base_type(__i) { }
| ^~~~~~
I haven't dug to know why it does not happen everywhere, but this patch
fixes it by using the constructor to initialize the variable, rather
than the assignment operator.
Change-Id: I6b27958171bf6187f6a875657395fd10441db7e6
|
|
Tom de Vries noticed that a patch in the DWARF scanner rewrite series
caused a regression in parallel_for_each -- it started crashing in the
case where the number of threads is 0 (there was an unchecked use of
"n-1" that was used to size an array).
He also pointed out that there were no tests of parallel_for_each.
This adds a few tests of parallel_for_each, primarily testing that
different settings for the number of threads will work. This test
catches the bug that he found in that series.
|
|
I wanted to see how many threads gdb thought it was using, but
"maint show worker-threads" only reported "unlimited". This patch
adds a show function so that it will now report the number of threads
gdb has started.
Regression tested on x86-64 Fedora 34.
|
|
With current gdb we run into:
...
$ gdb -batch '' ''
: No such file or directory.
pathstuff.cc:132: internal-error: \
gdb::unique_xmalloc_ptr<char> gdb_abspath(const char*): \
Assertion `path != NULL && path[0] != '\0'' failed.
...
Fix this by skipping the call to gdb_abspath in core_target_open in the
empty-string case, such that we have instead:
...
$ gdb -batch '' ''
: No such file or directory.
: No such file or directory.
$
...
Tested on x86_64-linux.
gdb/ChangeLog:
2021-08-30 Tom de Vries <tdevries@suse.de>
PR cli/28290
* gdb/corelow.c (core_target_open): Skip call to gdb_abspath in the
empty-string case.
gdb/testsuite/ChangeLog:
2021-08-30 Tom de Vries <tdevries@suse.de>
PR cli/28290
* gdb.base/batch-exit-status.exp: Add gdb '' and gdb '' '' tests.
|
|
The current syntax of proc arange is:
...
proc arange { arange_start arange_length {comment ""} {seg_sel ""} } {
...
and a typical call looks like:
...
arange $start $len
...
This style is somewhat annoying because if you want to specify the last
parameter, you need to give the default values of all the other optional ones
before as well:
...
arange $start $len "" $seg_sel
...
Update the syntax to:
...
proc arange { options arange_start arange_length } {
parse_options {
{ comment "" }
{ seg_sel "" }
}
...
such that a typical call looks like:
...
arange {} $start $len
...
and a call using seg_sel looks like:
...
arange {
seg_sel $seg_sel
} $start $len
...
Also update proc aranges, which already has an options argument, to use the
new proc parse_options.
Tested on x86_64-linux.
Co-Authored-By: Simon Marchi <simon.marchi@polymtl.ca>
|
|
When comparing the sizes of the index files generated for shlib
outputs/gdb.dwarf2/dw2-zero-range/shr1.sl, I noticed a large difference
between .debug_names:
...
$ gdb -q -batch $shlib -ex "save gdb-index -dwarf-5 ."
$ du -b -h shr1.sl.debug_names shr1.sl.debug_str
61 shr1.sl.debug_names
0 shr1.sl.debug_str
...
and .gdb_index:
...
$ gdb -q -batch $shlib -ex "save gdb-index ."
$ du -b -h shr1.sl.gdb-index
8.2K shr1.sl.gdb-index
...
The problem is that the .gdb_index contains a non-empty symbol table with only
empty entries.
Fix this by making the symbol table empty, such that we have instead:
...
$ du -b -h shr1.sl.gdb-index
184 shr1.sl.gdb-index
...
Tested on x86_64-linux.
|
|
Before commit 5ef670d81fd "[gdb/testsuite] Add dummy start and end CUs in
dwarf assembly" we had in exec outputs/gdb.dlang/watch-loc/watch-loc a D
compilation unit at offset 0xc7:
...
Compilation Unit @ offset 0xc7:
Length: 0x4c (32-bit)
Version: 4
Abbrev Offset: 0x64
Pointer Size: 8
<0><d2>: Abbrev Number: 2 (DW_TAG_compile_unit)
<d3> DW_AT_language : 19 (D)
...
with a corresponding .debug_aranges entry:
...
Offset into .debug_info: 0xc7
Pointer Size: 4
Segment Size: 0
Address Length
004004a7 0000000b
00000000 00000000
...
After that commit we have a dummy CU at offset 0xc7 and the D compilation unit
at offset 0xd2:
...
Compilation Unit @ offset 0xc7:
Length: 0x7 (32-bit)
Version: 4
Abbrev Offset: 0x64
Pointer Size: 8
Compilation Unit @ offset 0xd2:
Length: 0x4c (32-bit)
Version: 4
Abbrev Offset: 0x65
Pointer Size: 8
<0><dd>: Abbrev Number: 2 (DW_TAG_compile_unit)
<de> DW_AT_language : 19 (D)
...
while the .debug_aranges entry still points to 0xc7.
The problem is that the test-case uses a hack (quoting from
commit 75f06e9dc59):
...
[ Note: this is a non-trivial test-case. The file watch-loc-dw.S contains a
.debug_info section, but not an .debug_aranges section or any actual code.
The file watch-loc.c contains code and a .debug_aranges section, but no other
debug section. So, the intent for the .debug_aranges section in watch-loc.c
is to refer to a compilation unit in the .debug_info section in
watch-loc-dw.S. ]
...
and adding the dummy CU caused that hack to stop working.
Fix this by moving the generation of .debug_aranges from watch-loc.c to
watch-loc.exp, such that we have:
...
Offset into .debug_info: 0xd2
Pointer Size: 4
Segment Size: 0
Address Length
004004a7 0000000b
00000000 00000000
...
Tested on x86_64-linux.
|
|
A best practise for DWARF [1] is to generate .debug_aranges entries for CUs
even if they have no address range.
Generate .debug_arange entries for the dummy CUs added by the DWARF assembler.
Tested on x86_64-linux.
[1] http://wiki.dwarfstd.org/index.php?title=Best_Practices
|
|
A couple of test-cases fail when run with target board cc-with-debug-names due
to missing .debug_aranges entries for the CUs added by the dwarf assembler.
Add a .debug_aranges entry for those CUs.
Tested on x86_64-linux.
|
|
Add a proc aranges such that we can generate .debug_aranges sections in dwarf
assembly using:
...
cu { label cu_label } {
...
}
aranges {} cu_label {
arange $addr $len [<comment>] [$segment_selector]
}
...
Tested on x86_64-linux.
|
|
We can use current dwarf assembly infrastructure to declare a label that marks
the start of the CU header:
...
declare_labels header_start_cu_a
_section ".debug_info"
header_start_cu_a : cu {} {
}
_section ".debug_info"
header_start_cu_b : cu {} {
}
...
on the condition that we switch to the .debug_info section before, which makes
this style of use fragile.
Another way to achieve the same is to use the label as generated by the cu
proc itself:
...
variable _cu_label
cu {} {
}
set header_start_cu_a $_cu_label
cu {} {
}
set header_start_cu_b $_cu_label
...
but again that seems fragile given that adding a new CU inbetween will
silently result in the wrong value for the label.
Add a label option to proc cu such that we can simply do:
...
cu { label header_start_cu_a } {
}
cu { label header_start_cu_b } {
}
...
Tested on x86_64-linux.
|
|
I spotted a couple of stray newlines that were left at the end of
debug message during conversion to the new debug output scheme. These
messages are part of the 'set debug lin-lwp 1' output.
|
|
PR symtab/28160 and PR symtab/27893 concern GDB crashes in the test
suite when using the "fission" target board. They are both caused by
the patches that merge the list of CUs with the list of TUs (and to a
lesser degree by the patches to share DWARF data across objfiles), and
the underlying issue is the same: it turns out that reading a DWO can
cause new type units to be created. This means that the list of
dwarf2_per_cu_data objects depends on precisely which CUs have been
expanded. However, because the type units can be created while
expanding a CU means that the vector of CUs can expand while it is
being iterated over -- a classic mistake. Also, because a TU can be
added later, it means the resize_symtabs approach is incorrect.
This patch fixes resize_symtabs by removing it, and having set_symtab
resize the vector on demand. It fixes the iteration problem by
introducing a safe (index-based) iterator and changing the relevant
spots to use it.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28160
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27893
|
|
dw2-ranges-overlap.exp creates a program where a psymtab has two
address ranges, and a function without debug info whose address is
between these two ranges. Then it sets a breakpoint on this function
and runs to it, expecting that the language should remain "auto; c"
when stopped.
However, this test case also has a "main" function described (briefly)
in the DWARF, and this function is given language C++. Also, a
breakpoint stop sets the current language to the language that was
used when setting the breakpoint.
My new DWARF scanner decides that this "main" is the main program and
sets the current language to C++ at startup, causing this test to
fail.
This patch fixes the test in a simple way, by introducing a new
function that takes the place of "main" in the DWARF. I think this
still exercises the original problem, but also avoids problems with my
branch.
It seemed safe to me to submit this separately.
|
|
With trying to load a non-executable file into gdb, we run into PR26880:
...
$ gdb -q -batch test.c
"0x7ffc87bfc8d0s": not in executable format: \
file format not recognized
...
The problem is caused by using %ps in combination with the error function
(note that confusingly, it does work in combination with the warning
function).
Fix this by using plain "%s" instead.
Tested on x86_64-linux.
gdb/ChangeLog:
2021-08-22 Tom de Vries <tdevries@suse.de>
PR gdb/26880
* gdb/exec.c (exec_file_attach): Use %s instead of %ps in call to
error function.
gdb/testsuite/ChangeLog:
2021-08-22 Tom de Vries <tdevries@suse.de>
PR gdb/26880
* gdb.base/non-executable.exp: New file.
|
|
The test-case gdb.dwarf2/dw2-ranges.exp is the only one in the gdb testsuite
that uses gas-generated stabs.
While the use seems natural alongside the use of gas-generated dwarf in the
same test-case, there are a few known issues, filed on the gdb side as:
- PR symtab/12497 - "stabs: PIE relocation does not work"
- PR symtab/28221 - "[readnow, stabs] FAIL: gdb.dwarf2/dw2-ranges.exp: \
info line func"
and on the gas side as:
- PR gas/28233 - "[gas, --gstabs] Generate stabs more similar to gcc"
The test-case contains a KFAIL for PR12497, but it's outdated and fails to
trigger.
The intention of the test-case is to test gas-generated dwarf, and using
gcc-generated stabs instead of gas-generated stabs works fine.
Supporting compiler-generated stabs is already a corner-case for gdb, and
there's no current commitment/incentive to support/workaround gas-generated
stabs, which can be considered a corner-case of a corner-case.
Work around these problem by using compiler-generated stabs in the test-case.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2021-08-22 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/dw2-ranges.exp: Use compiler-generated stabs.
|
|
Say one compiles a hello.c:
...
$ gcc -g hello.c
...
On openSUSE Leap 15.2 and Tumbleweed, the CU for hello.c is typically not the
first in .debug_info, nor the last, due to presence of debug information in
objects for sources like:
- ../sysdeps/x86_64/start.S
- init.c
- ../sysdeps/x86_64/crti.S
- elf-init.c
- ../sysdeps/x86_64/crtn.S.
On other systems, say ubuntu 18.04.5, the CU for hello.c is typically the
first and the last in .debug_info.
This difference has caused me to find some errors in the dwarf assembly
using openSUSE, that didn't show up on other platforms.
Force the same situation on other platforms by adding a dummy start
and end CU.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2021-08-22 Tom de Vries <tdevries@suse.de>
PR testsuite/28235
* lib/dwarf.exp (Dwarf::dummy_cu): New proc.
(Dwarf::assemble): Add dummy start and end CU.
|
|
When running test-case gdb.dwarf2/dw2-ranges-psym.exp with target board
-readnow, I run into:
...
(gdb) file dw2-ranges-psym^M
Reading symbols from dw2-ranges-psym...^M
Expanding full symbols from dw2-ranges-psym...^M
(gdb) set complaints 0^M
(gdb) FAIL: gdb.dwarf2/dw2-ranges-psym.exp: No complaints
...
The problem is that the regexp expects a gdb prompt immediately after the
"Reading symbols" line.
Fix this by updating the regexp.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2021-08-22 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (gdb_load_no_complaints): Update regexp to allow
"Expanding full symbols" Line.
|
|
Trivial patch to use bool instead of int.
Change-Id: I9e5f8ee4305272a6671cbaaaf2f0484eff0d1ea5
|
|
scan_dyntag is unnecessarily duplicated in solib-svr4.c and solib-dsbt.c.
Move this function to solib.c and rename it to gdb_bfd_scan_elf_dyntag.
Also add it to solib.h so it is included in both solib-svr4 and solib-dsbt.
|
|
Add a method to set the gcc target options for the ppc64 targets.
This change sets an empty value, which allows the gcc
default values (-mcmodel=medium) be used, instead of -mcmodel=large
which is set by the default_gcc_target_options hook.
|
|
Add methods to set the target triplet so we can
find the proper gcc when our gcc is named of
the form powerpc64{le}-<foo>-gcc or ppc64{le}-<foo>-gcc.
|
