| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
gdb_bfd.c and remote.c contain identical implementations of a
fileio_error -> errno function. Factor that out to
gdbsupport/fileio.{h,cc}.
Rename it fileio_error_to_host, for symmetry with host_to_fileio_error.
Change-Id: Ib9b8807683de2f809c94a5303e708acc2251a0df
|
|
Converting from free-form macros to an enum gives a bit of type-safety.
This caught places where we would assign host error numbers to what
should contain a target fileio error number, for instance in
target_fileio_pread.
I added the FILEIO_SUCCESS enumerator, because
remote.c:remote_hostio_parse_result initializes the remote_errno output
variable to 0. It seems better to have an explicit enumerator than to
assign a value for which there is no enumerator. I considered
initializing this variable to FILEIO_EUNKNOWN instead, such that if the
remote side replies with an error and omits the errno value, we'll get
an errno that represents an error instead of 0 (which reprensents no
error). But it's not clear what the consequences of that change would
be, so I prefer to err on the side of caution and just keep the existing
behavior (there is no intended change in behavior with this patch).
Note that remote_hostio_parse_resul still reads blindly what the remote
side sends as a target errno into this variable, so we can still end up
with a nonsensical value here. It's not good, but out of the scope of
this patch.
Convert host_to_fileio_error and fileio_errno_to_host to return / accept
a fileio_error instead of an int, and cascade the change in the whole
chain that uses that.
Change-Id: I454b0e3fcf0732447bc872252fa8e57d138b0e03
|
|
I don't see why include/gdb/fileio.h is placed there. It's not
installed by "make install", and it's not included by anything outside
of gdb/gdbserver/gdbsupport.
Move its content back to gdbsupport/fileio.h. I have omitted the bits
inside an `#if 0`, since it's obviously not used, as well as the
"limits" constants, which are also unused.
Change-Id: I6fbc2ea10fbe4cfcf15f9f76006b31b99c20e5a9
|
|
When a GDB built with -D_GLIBCXX_DEBUG=1 reads a binary with a single
character name, we hit this assertion failure:
$ ./gdb -q --data-directory=data-directory -nx ./x
/usr/include/c++/12.1.0/string_view:239: constexpr const std::basic_string_view<_CharT, _Traits>::value_type& std::basic_string_view<_CharT, _Traits>::operator[](size_type) const [with _CharT = char; _Traits = std::char_traits<char>; const_reference = const char&; size_type = long unsigned int]: Assertion '__pos < this->_M_len' failed.
The backtrace:
#3 0x00007ffff6c0f002 in std::__glibcxx_assert_fail (file=<optimized out>, line=<optimized out>, function=<optimized out>, condition=<optimized out>) at /usr/src/debug/gcc/libstdc++-v3/src/c++11/debug.cc:60
#4 0x000055555da8a864 in std::basic_string_view<char, std::char_traits<char> >::operator[] (this=0x7fffffffcc30, __pos=1) at /usr/include/c++/12.1.0/string_view:239
#5 0x00005555609dcb88 in path_join[abi:cxx11](gdb::array_view<std::basic_string_view<char, std::char_traits<char> > const>) (paths=...) at /home/simark/src/binutils-gdb/gdbsupport/pathstuff.cc:203
#6 0x000055555e0443f4 in path_join<char const*, char const*> () at /home/simark/src/binutils-gdb/gdb/../gdbsupport/pathstuff.h:84
#7 0x00005555609dc336 in gdb_realpath_keepfile[abi:cxx11](char const*) (filename=0x6060000a8d40 "/home/simark/build/binutils-gdb-one-target/gdb/./x") at /home/simark/src/binutils-gdb/gdbsupport/pathstuff.cc:122
#8 0x000055555ebd2794 in exec_file_attach (filename=0x7fffffffe0f9 "./x", from_tty=1) at /home/simark/src/binutils-gdb/gdb/exec.c:471
#9 0x000055555f2b3fb0 in catch_command_errors (command=0x55555ebd1ab6 <exec_file_attach(char const*, int)>, arg=0x7fffffffe0f9 "./x", from_tty=1, do_bp_actions=false) at /home/simark/src/binutils-gdb/gdb/main.c:513
#10 0x000055555f2b7e11 in captured_main_1 (context=0x7fffffffdb60) at /home/simark/src/binutils-gdb/gdb/main.c:1209
#11 0x000055555f2b9144 in captured_main (data=0x7fffffffdb60) at /home/simark/src/binutils-gdb/gdb/main.c:1319
#12 0x000055555f2b9226 in gdb_main (args=0x7fffffffdb60) at /home/simark/src/binutils-gdb/gdb/main.c:1344
#13 0x000055555d938c5e in main (argc=5, argv=0x7fffffffdcf8) at /home/simark/src/binutils-gdb/gdb/gdb.c:32
The problem is this line in path_join:
gdb_assert (strlen (path) == 0 || !IS_ABSOLUTE_PATH (path));
... where `path` is "x". IS_ABSOLUTE_PATH eventually calls
HAS_DRIVE_SPEC_1:
#define HAS_DRIVE_SPEC_1(dos_based, f) \
((f)[0] && ((f)[1] == ':') && (dos_based))
This macro accesses indices 0 and 1 of the input string. However, `f`
is a string_view of length 1, so it's incorrect to try to access index
1. We know that the string_view's underlying object is a null-terminated
string, so in practice there's no harm. But as far as the string_view
is concerned, index 1 is considered out of bounds.
This patch makes the easy fix, that is to change the path_join parameter
from a vector of to a vector of `const char *`. Another solution would
be to introduce a non-standard gdb::cstring_view class, which would be a
view over a null-terminated string. With that class, it would be
correct to access index 1, it would yield the NUL character. If there
is interest in having this class (it has been mentioned a few times in
the past) I can do it and use it here.
This was found by running tests such as gdb.ada/arrayidx.exp, which
produce 1-char long filenames, so adding a new test is not necessary.
Change-Id: Ia41a16c7243614636b18754fd98a41860756f7af
|
|
Remove the macro, replace all uses with calls to type::length.
Change-Id: Ib9bdc954576860b21190886534c99103d6a47afb
|
|
Add the `length` and `set_length` methods on `struct type`, in order to remove
the `TYPE_LENGTH` macro. In this patch, the macro is changed to use the
getter, so all the call sites of the macro that are used as a setter are
changed to use the setter method directly. The next patch will remove the
macro completely.
Change-Id: Id1090244f15c9856969b9be5006aefe8d8897ca4
|
|
Remove the macro, replace all uses by calls to type::target_type.
Change-Id: Ie51d3e1e22f94130176d6abd723255282bb6d1ed
|
|
Add the `target_type` and `set_target_type` methods on `struct type`, in order
to remove the `TYPE_TARGET_TYPE` macro. In this patch, the macro is changed to
use the getter, so all the call sites of the macro that are used as a setter
are changed to use the setter method directly. The next patch will remove the
macro completely.
Change-Id: I85ce24d847763badd34fdee3e14b8c8c14cb3161
|
|
I noticed that stdin_event_handler is only used in event-top.c, so
this patch changes it to be 'static'.
|
|
This changes some target_so_ops instances to be const. This makes
their use a little more obvious (they can't be mutated) and also
allows for the removal of some initialization code.
|
|
This changs solib_ops to be an ordinary gdbarch value and updates all
the uses. This removes a longstanding FIXME and makes the code
somewhat cleaner as well.
|
|
current_target_so_ops is only set in a single place. It seems better
to simply remove it.
|
|
We currently have a single test for GDB's debuginfod support, this is
gdb.debuginfod/fetch_src_and_symbols.exp, this script does all the
setup, starts debuginfod, and then does the testing.
This commit tries to split the existing script in two, there is a new
library lib/debuginfod-support.exp, which contains a helper functions
related to running debuginfod tests. All the code in the new library
is basically copied from the existing test case (which is why I
retained the copyright date range on the new library), with some minor
adjustments to try and make the code a little more generic.
One change I made, for example, is the library offers functions to
shut down debuginfod, previously we just relied on expect shutting
down debuginfod when dejagnu completed.
The existing test script is updated to make use of the new library
code, and this test is still passing for me. The only change in the
test results is a single test where I changed the name to remove the
port number from the test name - the port number can change from run
to run, so could make it hard to compare test results.
I have also done a little light house keeping on the original test
script, updating and adding new comments, and making use of
proc_with_prefix in a couple of places.
|
|
I see this error when building with clang,
CXX gdb_bfd.o
gdb_bfd.c:1180:43: error: format string is not a string literal [-Werror,-Wformat-nonliteral]
const std::string str = string_vprintf (fmt, ap_copy);
^~~
1 error generated.
This patch adds missing ATTRIBUTE_PRINTF to fix the error.
Tested on x86_64-linux with gcc 12 and clang 14.
|
|
With the test-case included in this commit, we run into this FAIL:
...
(gdb) p var^M
During symbol reading: file index out of range^M
$1 = 0^M
(gdb) FAIL: gdb.dwarf2/dw2-no-code-cu.exp: p var with no complaints
...
This is a regression since commit 6d263fe46e0 ("Avoid bad breakpoints with
--gc-sections"), which contains this change in read_file_scope:
...
- handle_DW_AT_stmt_list (die, cu, fnd, lowpc);
+ if (lowpc != highpc)
+ handle_DW_AT_stmt_list (die, cu, fnd, lowpc);
...
The change intends to avoid a problem with a check in
lnp_state_machine::check_line_address, but also prevents the file and dir
tables from being read, which causes the complaint.
Fix the FAIL by reducing the scope of the "lowpc != highpc" condition to the
call to dwarf_decode_lines in handle_DW_AT_stmt_list.
Tested on x86_64-linux.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29561
|
|
This commit adds a GDB test case which tests GDB's BFD error handler
hook for suppressing output of all but the first identical messages.
See the comment at the beginning of bfd-errors.exp for details about
this new test.
I've tested this test for both 32- and 64-bit ELF files and also
on both little endian and big endian machines. It also works for
both native and remote targets. The only major restriction is that
it only works for ELF targets.
|
|
This commit adds a hook to the BFD error handler for suppressing
identical messages which have been output once already.
It's motivated by this Fedora bug...
https://bugzilla.redhat.com/show_bug.cgi?id=2083315
...in which over 900,000 BFD error messages are output when attaching
to firefox. From the bug report, the messages all say:
BFD: /usr/lib/debug/usr/lib64/firefox/libxul.so-100.0-2.fc35.x86_64.debug: attempt to load strings from a non-string section (number 38)
Since there's no (additional) context which might assist the user in
determining what's wrong, there's really no point in outputting more
than one message. Of course, if BFD should output some
other/different message, it should be output too, but all future
messages identical to those already output should be suppressed.
For the firefox problem, it turned out that there were only 37
sections, but something was referring to section #38. I haven't
investigated further to find out how this came to be.
Despite this problem, useful debugging might still be done, especially
if the user doesn't care about debugging the problematic library.
If it turns out that knowing the quantity of messages might be useful,
I've implemented the suppression mechanism by keeping a count of each
identical message. A new GDB command, perhaps a 'maintenance'
command, could be added to print out each message along with the
count. I haven't implemented this though because I'm not convinced of
its utility. Also, the BFD message printer has support for BFD-
specific format specifiers. The BFD message strings that GDB stores
in its map are sufficient for distinguishing messages from each
other, but are not identical to those output by BFD's default error
handler. So, that problem would need to be solved too.
|
|
With the test-case included in the patch, we run into:
...
(gdb) info types -q std::nullptr_t^M
During symbol reading: unsupported tag: 'DW_TAG_unspecified_type'^M
^M
File /usr/include/c++/7/x86_64-suse-linux/bits/c++config.h:^M
2198: typedef decltype(nullptr) std::nullptr_t;^M
(gdb) FAIL: gdb.dwarf2/nullptr_t.exp: info types -q std::nullptr_t \
without complaint
...
Fix the complaint by handling DW_TAG_unspecified_type in new_symbol, and verify
in the test-case using "maint print symbols" that the symbol exists.
Tested on x86_64-linux, with gcc 7.5.0 and clang 13.0.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17271
|
|
On a powerpc system with gcc 12 built to default to 128-bit IEEE long double,
I run into:
...
(gdb) print find_max_long_double_real(4, ldc1, ldc2, ldc3, ldc4)^M
$8 = 0 + 0i^M
(gdb) FAIL: gdb.base/varargs.exp: print \
find_max_long_double_real(4, ldc1, ldc2, ldc3, ldc4)
...
This is due to incorrect handling of the argument in ppc64_sysv_abi_push_param.
Fix this and similar cases, and expand the test-case to test handling of
homogeneous aggregates.
Tested on ppc64le-linux, power 10.
Co-Authored-By: Ulrich Weigand <uweigand@de.ibm.com>
Tested-by: Carl Love <cel@us.ibm.com>
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29543
|
|
[ Another attempt at fixing the problem described in commit cd919f5533c
("[gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp"). ]
When running the test-case gdb.dwarf2/dw2-dir-file-name.exp with
aarch64-linux, we run into:
...
(gdb) continue^M
Continuing.^M
^M
Breakpoint 2, compdir_missing__ldir_missing__file_basename () at \
tmp-dw2-dir-file-name.c:999^M
(gdb) FAIL: gdb.dwarf2/dw2-dir-file-name.exp: \
compdir_missing__ldir_missing__file_basename: continue to breakpoint: \
compdir_missing__ldir_missing__file_basename
...
The breakpoint set at compdir_missing__ldir_missing__file_basename_label,
address 0x400608 starts at a line entry:
...
CU: tmp-dw2-dir-file-name.c:
File name Line number Starting address View Stmt
tmp-dw2-dir-file-name.c 999 0x400608 x
tmp-dw2-dir-file-name.c 1000 0x40062c x
tmp-dw2-dir-file-name.c - 0x40062c
...
and therefore the breakpoint is printed without instruction address.
In contrast, for x86_64-linux, we have the breakpoint printed with instruction
address:
...
(gdb) continue^M
Continuing.^M
^M
Breakpoint 2, 0x004004c1 in compdir_missing__ldir_missing__file_basename () \
at tmp-dw2-dir-file-name.c:999^M
(gdb) PASS: gdb.dwarf2/dw2-dir-file-name.exp: \
compdir_missing__ldir_missing__file_basename: continue to breakpoint: \
compdir_missing__ldir_missing__file_basename
...
The breakpoint set at compdir_missing__ldir_missing__file_basename_label,
address 0x004004c1 doesn't start at a line entry:
...
CU: tmp-dw2-dir-file-name.c:
File name Line number Starting address View Stmt
tmp-dw2-dir-file-name.c 999 0x4004bd x
tmp-dw2-dir-file-name.c 1000 0x4004d3 x
tmp-dw2-dir-file-name.c - 0x4004d3
...
Fix this by:
- unifying behaviour between the archs by adding an explicit line number entry
for the address compdir_missing__ldir_missing__file_basename_label, making
the FAIL reproducible on x86_64-linux.
- expecting the breakpoint to be printed without instruction address.
Tested on x86_64-linux and aarch64-linux.
|
|
In completion tests in various test-cases, we've been running into these
"clearing input line" timeouts:
...
(gdb) $cmd^GPASS: gdb.gdb/unittest.exp: tab complete "$cmd"
FAIL: gdb.gdb/unittest.exp: tab complete "$cmd" (clearing input line) (timeout)
...
where $cmd == "maintenance selftest name_that_does_not_exist".
AFAIU, the following scenario happens:
- expect sends "$cmd\t"
- gdb detects the stdin event, and calls rl_callback_read_char until it
comes to handle \t
- readline interprets the \t as completion, tries to complete, fails to do so,
outputs a bell (^G)
- expect sees the bell, and proceeds to send ^C
- readline is still in the call to rl_callback_read_char, and stores the
signal in _rl_caught_signal
- readline returns from the call to rl_callback_read_char, without having
handled _rl_caught_signal
- gdb goes to wait for the next event
- expect times out waiting for "Quit", the expected reaction for ^C
Fix this by handling pending signals after each call to rl_callback_read_char.
The fix is only available for readline 8.x, if --with-system-readline provides
an older version, then the fix is disabled due to missing function
rl_check_signals.
Tested on x86_64-linux.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27813
|
|
gdb.base/so-impl-ld.exp was setup assuming that the compiler would add
epilogue information and that GDB would stop in the } line. This would
make clang tests fail like so:
step^M
solib_main (arg=10000) at ../../../common/git-repos/binutils-gdb/gdb/testsuite/gdb.base/solib1.c:7^M
7|__ return arg*arg;|__|___/* HERE */^M
(gdb) PASS: gdb.base/so-impl-ld.exp: step into solib call
next^M
main () at ../../../common/git-repos/binutils-gdb/gdb/testsuite/gdb.base/so-impl-ld.c:22^M
22|_ return 0;^M
(gdb) FAIL: gdb.base/so-impl-ld.exp: step in solib call
next^M
0x00007ffff7cef560 in __libc_start_call_main () from /lib64/libc.so.6^M
(gdb) FAIL: gdb.base/so-impl-ld.exp: step out of solib call
This patch changes it so solib_main has 2 lines where GDB can stop
regardless of compiler choices, and updates the exp file to
generically deal with unknown number of steps until leaving that
function.
|
|
Currently, GDB's testsuite uses a set amount of step commands to exit
functions. This is a problem if a compiler emits different epilogue
information from gcc, or emits no epilogue information at all. It was
most noticeable if Clang was used to test GDB.
To fix this unreliability, this commit introduces a new proc that will
step the inferior until it is stopped at a line that matches the given
regexp, or until it steps too many times - defined as an optional
argument. If the line is found, it shows up as a single PASS in the
test, and if the line is not found, a single FAIL is emitted.
This patch only introduces this proc, but does not add it to any
existing tests, these will be introduced in the following commit.
|
|
Not all compilers add stderr debug information when compiling a
program. Clang, for instance, prefers to add nothing from standard
libraries and let an external debug package have this information.
Because of this, gdb.base/dprintf.exp was failing when GDB attempted to
use dprintf as a call to fprintf(stderrr, ...), like this:
(gdb) PASS: gdb.base/dprintf.exp: call: fprintf: set dprintf style to call
continue
Continuing.
kickoff 1234
also to stderr 1234
'stderr' has unknown type; cast it to its declared type
(gdb) FAIL: gdb.base/dprintf.exp: call: fprintf: 1st dprintf (timeout)
To avoid this false positive, we explicitly test to see if
the compiler has added information about stderr at all, and abort
testing dprintf as an fprintf call if it is unavailable.
|
|
The reason for implementing this interface is that we want to print
GPR, PC, EPC, PSR and EPSR when the "info register" command
is executed.
A prev patch has added PC, EPC, PSR and EPSR to reggroup
general_group, the purpose has been achieved, so this function is
no longer required.
|
|
Software breakpoints are inserted or removed by the gdb stub via
remote protocol, these two functions are no longer needed.
|
|
There are two sequences of instructions for long branch:
1. jmpi [pc+4] //insn code: 0xeac00001
.long addr
2. lrw t1, [pc+8] //insn code: 0xea8d0002
jmp t1 //insn code: 0x7834
nop //insn code: 0x6c03
.long addr
|
|
Add new files:
gdb/arch/csky.c
gdb/arch/csky.h
gdb/features/cskyv2-linux.c
gdbserver/linux-csky-low.cc
1. In gdb/arch/csky.c file, add function "csky_create_target_description()"
for csky_target::low_arch_setup(). later, it can be used for csky native gdb.
2. In gdb/features/cskyv2-linux.c file, create target_tdesc for csky, include
gprs, pc, hi, lo, float, vector and float control registers.
3. In gdbserver/linux-csky-low.cc file, using PTRACE_GET/SET_RGESET to
get/set registers. The main data structures in asm/ptrace.h are:
struct pt_regs {
unsigned long tls;
unsigned long lr;
unsigned long pc;
unsigned long sr;
unsigned long usp;
/*
* a0, a1, a2, a3:
* r0, r1, r2, r3
*/
unsigned long orig_a0;
unsigned long a0;
unsigned long a1;
unsigned long a2;
unsigned long a3;
/*
* r4 ~ r13
*/
unsigned long regs[10];
/* r16 ~ r30 */
unsigned long exregs[15];
unsigned long rhi;
unsigned long rlo;
unsigned long dcsr;
};
struct user_fp {
unsigned long vr[96];
unsigned long fcr;
unsigned long fesr;
unsigned long fid;
unsigned long reserved;
};
|
|
I went through all the uses of dynamic_cast<> in gdb, looking for ones
that could be replaced with checked_static_cast. This patch is the
result. Regression tested on x86-64 Fedora 34.
|
|
clang doesn't add encoding to the name of complex variables, only says
that the type name is complex, making the relevant tests fail.
This patch adds the xfails to the tests that expect the variable name to
include it.
|
|
When running gdb.base/call-ar-st.exp against Clang, we see one FAIL,
like so:
print_all_arrays (array_i=<main.integer_array>, array_c=<main.char_array> "ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa
ZaZaZaZaZaZaZaZaZaZaZaZa", array_f=<main.float_array>, array_d=<main.double_array>) at ../../../src/gdb/testsuite/gdb.base/call-ar-st.c:274
274 print_int_array(array_i); /* -step1- */
(gdb) FAIL: gdb.base/call-ar-st.exp: step inside print_all_arrays
With GCC we instead see:
print_all_arrays (array_i=<integer_array>, array_c=<char_array> "ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa", array_f=<float_array>, array_d=<double_array>) at /home/pedro/gdb/build/gdb/testsuite/../../../src/gdb/testsuite/gdb.base/call-ar-st.c:274
274 print_int_array(array_i); /* -step1- */
(gdb) PASS: gdb.base/call-ar-st.exp: step inside print_all_arrays
The difference is that with Clang we get:
array_i=<main.integer_array>, ...
instead of
array_i = <integer_array>, ...
These symbols are local static variables, and "main" is the name of
the function they are defined in. GCC instead appends a sequence
number to the linkage name:
$ nm -A call-ar-st.gcc | grep integer_
call-ar-st/call-ar-st:00000000000061a0 b integer_array.3968
$ nm -A call-ar-st.clang | grep integer_
call-ar-st:00000000004061a0 b main.integer_array
This commit changes the testcase to accept both outputs, as they are
functionally identical.
Co-Authored-By: Pedro Alves <pedro@palves.net>
Change-Id: Iaf2ccdb9d5996e0268ed12f595a6e04b368bfcb4
|
|
Clang was optimizing global_var away because it was not being used
anywhere. this commit fixes that by adding the attribute used it.
|
|
The test specifically mentions that it doesn't care where the program
stops, however it was still testing for a specific location. The clang
compiler emits different line information for epilogue, so GDB reports a
different stopping location, depending on the used compiler. With this
patch the test works even with clang.
|
|
Clang organizes the variables differently to gcc in the original version
of this code, leading to the following differences when testing
p (int*) &dataglobal + 1
gcc:
$16 = (int *) 0x404034 <datalocal>
clang:
$16 = (int *) 0x404034 <dataglobal8>
However, since the important part of this test doesn't seem to be which
symbol is linked, but rather if GDB is correctly increasing the
address. This test was changed to actually measure address changes,
instead of assuming the ordering and naming of symbols.
Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
|
|
When running selftest run_on_main_thread and pressing ^C, we can run into:
...
Running selftest run_on_main_thread.
terminate called without an active exception
Fatal signal: Aborted
...
The selftest function looks like this:
...
static void
run_tests ()
{
std::thread thread;
done = false;
{
gdb::block_signals blocker;
thread = std::thread (set_done);
}
while (!done && gdb_do_one_event () >= 0)
;
/* Actually the test will just hang, but we want to test
something. */
SELF_CHECK (done);
thread.join ();
}
...
The error message we see is due to the destructor of thread being called while
thread is joinable.
This is supposed to be taken care of by thread.join (), but the ^C prevents
that one from being called, while the destructor is still called.
Fix this by ensuring thread.join () is called (if indeed required) before the
destructor using SCOPE_EXIT.
Tested on x86_64-linux.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29549
|
|
The .gdb_index variant of commit d878bb39e41 ("[gdb/symtab] Support
.debug_names section with TUs in .debug_info").
Tested on x86_64-linux.
|
|
In commit cd919f5533c ("[gdb/testsuite] Fix
gdb.dwarf2/dw2-dir-file-name.exp"), I made gdb.dwarf2/dw2-dir-file-name.exp
independent of prologue analyzers, using this change:
...
- gdb_breakpoint $func
+ gdb_breakpoint *$func
...
That however caused a regression on ppc64le. For PowerPC, as described in the
ELFv2 ABI, a function can have a global and local entry point.
Setting a breakpoint on *$func effectively creates a breakpoint for the global
entry point, so if the function is entered through the local entry point, the
breakpoint doesn't trigger.
Fix this by reverting commit cd919f5533c, and setting the breakpoint on
${func}_label instead.
Tested on x86_64-linux and ppc64le-linux.
|
|
When running test-case gdb.dwarf2/dw2-dir-file-name.exp with clang, we run
into:
...
(gdb) break *compdir_missing__ldir_missing__file_basename^M
Breakpoint 2 at 0x400580^M
(gdb) continue^M
Continuing.^M
^M
Breakpoint 2, 0x0000000000400580 in \
compdir_missing.ldir_missing.file_basename ()^M
(gdb) FAIL: gdb.dwarf2/dw2-dir-file-name.exp: \
compdir_missing__ldir_missing__file_basename: continue to breakpoint: \
compdir_missing__ldir_missing__file_basename
...
The problem is that the test-case uses labels outside functions, which is know
to cause problem with clang, as documented in the comment for proc
function_range.
Fix this by using get_func_info instead.
Tested on x86_64-linux, with both gcc 7.5.0 and clang 13.0.0.
|
|
Currently, the test-case contained in this patch fails:
...
(gdb) p (int) foo ()^M
Invalid cast.^M
(gdb) FAIL: gdb.dwarf2/dw2-unspecified-type.exp: p (int) foo ()
...
because DW_TAG_unspecified_type is translated as void.
There's some code in read_unspecified_type that marks the type as stub, but
that's only active for ada:
...
if (cu->lang () == language_ada)
type->set_is_stub (true);
...
Fix this by:
- marking the type as a stub for all languages, and
- handling the stub return type case in call_function_by_hand_dummy.
Tested on x86_64-linux.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29558
|
|
This test generates 48 failures on Power 9 when testing with HW watchpoints
enabled. Note HW watchpoint support is disabled on Power 9 due to a HW bug.
The skip_hw_watchpoint_tests proc must be used to correctly determine
if the processor supports HW watchpoints.
This patch replaces the [target_info exists gdb,no_hardware_watchpoints]
with the skip_hw_watchpoint_tests check.
This patch was tested on Power 9, Power 10 and X86-64 with no regressions.
|
|
On aarch64-linux, with gcc 7.5.0, we run into:
...
(gdb) frame^M
#0 callee.increment (val=99.0, val@entry=9.18340949e-41, msg=...) at \
callee.adb:21^M
21 if Val > 200.0 then^M
(gdb) FAIL: gdb.ada/O2_float_param.exp: scenario=all: frame
...
The problem is a GCC bug, filed as "PR98148 - [AArch64] Wrong location
expression for function entry values" (
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98148 ).
Xfail the test for aarch64 and gcc 7.
Tested on x86_64-linux and aarch64-linux.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29418
|
|
On aarch64-linux, I run into:
...
Breakpoint 2, pck.inspect (obj=0x430eb0 \
<system.pool_global.global_pool_object>, <objL>=0) at pck.adb:17^M
17 procedure Inspect (Obj: access Top_T'Class) is^M
(gdb) FAIL: gdb.ada/access_tagged_param.exp: continue
...
while on x86_64-linux, I see:
...
Breakpoint 2, pck.inspect (obj=0x62b2a0, <objL>=2) at pck.adb:19^M
19 null;^M
(gdb) PASS: gdb.ada/access_tagged_param.exp: continue
...
Note the different line numbers, 17 vs 19.
The difference comes from the gdbarch_skip_prologue implementation.
The amd64_skip_prologue implementation doesn't use gcc line numbers, and falls
back to the architecture-specific prologue analyzer, which correctly skips
past the prologue, to address 0x4022f7:
...
00000000004022ec <pck__inspect>:
4022ec: 55 push %rbp
4022ed: 48 89 e5 mov %rsp,%rbp
4022f0: 48 89 7d f8 mov %rdi,-0x8(%rbp)
4022f4: 89 75 f4 mov %esi,-0xc(%rbp)
4022f7: 90 nop
4022f8: 90 nop
4022f9: 5d pop %rbp
4022fa: c3 ret
...
The aarch64_skip_prologue implementation does use gcc line numbers, which are:
...
File name Line number Starting address View Stmt
pck.adb 17 0x402580 x
pck.adb 17 0x402580 1 x
pck.adb 19 0x40258c x
pck.adb 20 0x402590 x
...
and which are represented like this internally in gdb:
...
INDEX LINE ADDRESS IS-STMT PROLOGUE-END
0 17 0x0000000000402580 Y
1 17 0x0000000000402580 Y
2 19 0x000000000040258c Y
3 20 0x0000000000402590 Y
4 END 0x00000000004025a0 Y
...
The second entry is interpreted as end-of-prologue, so 0x402580 is used, while
the actual end of the prologue is at 0x40258c:
...
0000000000402580 <pck__inspect>:
402580: d10043ff sub sp, sp, #0x10
402584: f90007e0 str x0, [sp, #8]
402588: b90007e1 str w1, [sp, #4]
40258c: d503201f nop
402590: d503201f nop
402594: 910043ff add sp, sp, #0x10
402598: d65f03c0 ret
40259c: d503201f nop
...
Note that the architecture-specific prologue analyzer would have gotten this
right:
...
(gdb) p /x aarch64_analyze_prologue (gdbarch, pc, pc + 128, 0)
$2 = 0x40258c
...
Fix the FAIL by making the test-case more robust against problems in prologue
skipping, by setting the breakpoint on line 19 instead.
Likewise in a few similar test-cases.
Tested on x86_64-linux and aarch64-linux.
|
|
v2:
- Add 32-bit Arm instruction selftest
- Refactored abstract memory reader into abstract instruction reader
- Adjusted code to use templated type and to use host endianness as
opposed to target endianness.
The arm record tests handle 16-bit and 32-bit thumb instructions, but the
code is laid out in a way that handles the 32-bit thumb instructions as
two 16-bit parts.
This is fine, but it is prone to host-endianness issues given how the two
16-bit parts are stored and how they are accessed later on. Arm is
little-endian by default, so running this test with a GDB built with
--enable-targets=all and on a big endian host will run into the following:
Running selftest arm-record.
Process record and replay target doesn't support syscall number -2036195
Process record does not support instruction 0x7f70ee1d at address 0x0.
Self test failed: self-test failed at ../../binutils-gdb/gdb/arm-tdep.c:14482
It turns out the abstract memory reader class is more generic than it needs to
be, and we can simplify the code a bit by assuming we have a simple instruction
reader that only reads up to 4 bytes, which is the length of a 32-bit
instruction.
Instead of returning a bool, we return instead the instruction that has been
read. This way we avoid having to deal with the endianness conversion, and use
the host endianness instead. The Arm selftests can be executed on non-Arm
hosts.
While at it, Tom suggested adding a 32-bit Arm instruction selftest to increase
the coverage of the selftests.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29432
Co-authored-by: Tom de Vries <tdevries@suse.de>
|
|
On openSUSE Tumbleweed (using glibc 2.36), I run into:
...
(gdb) print /d (int) munmap (4198400, 4096)^M
Invalid cast.^M
(gdb) FAIL: gdb.base/break-main-file-remove-fail.exp: cmdline: \
get integer valueof "(int) munmap (4198400, 4096)"
...
The problem is that after starting the executable, the symbol has type
"void (*) (void)":
...
(gdb) p munmap
$1 = {<text variable, no debug info>} 0x401030 <munmap@plt>
(gdb) start
...
(gdb) p munmap
$2 = {void (void)} 0x7ffff7feb9a0 <__GI_munmap>
...
which causes the "Invalid cast" error.
Looking at the debug info for glibc for symbol __GI_munmap:
...
<0><189683>: Abbrev Number: 1 (DW_TAG_compile_unit)
<189691> DW_AT_name : ../sysdeps/unix/syscall-template.S
<189699> DW_AT_producer : GNU AS 2.39.0
<1><1896ae>: Abbrev Number: 2 (DW_TAG_subprogram)
<1896af> DW_AT_name : __GI___munmap
<1896b3> DW_AT_external : 1
<1896b4> DW_AT_low_pc : 0x10cad0
<1896bc> DW_AT_high_pc : 37
...
that's probably caused by this bit (or similar bits for other munmap aliases).
This is fixed in gas on trunk by commit 5578fbf672e ("GAS: Add a return type
tag to DWARF DIEs generated for function symbols").
Work around this (for say gas 2.39) by explicitly specifying the prototype for
munmap.
Likewise for getpid in a couple of other test-cases.
Tested on x86_64-linux.
|
|
|
|
Noticed in passing that an entry in the MAINTAINERS write after
approval list was in the wrong place.
|
|
This is paired with "opcodes: Add non-enum disassembler options".
There is a portable mechanism for disassembler options and used on some
architectures:
- ARC
- Arm
- MIPS
- PowerPC
- RISC-V
- S/390
However, it only supports following forms:
- [NAME]
- [NAME]=[ENUM_VALUE]
Valid values for [ENUM_VALUE] must be predefined in
disasm_option_arg_t.values. For instance, for -M cpu=[CPU] in ARC
architecture, opcodes/arc-dis.c builds valid CPU model list from
include/elf/arc-cpu.def.
In this commit, it adds following format:
- [NAME]=[ARBITRARY_VALUE] (cannot contain "," though)
This is identified by NULL value of disasm_option_arg_t.values
(normally, this is a non-NULL pointer to a NULL-terminated list).
gdb/ChangeLog:
* gdb/disasm.c (set_disassembler_options): Add support for
non-enum disassembler options.
(show_disassembler_options_sfunc): Likewise.
|
|
When running test-case gdb.cp/cpexprs-debug-types.exp on target board
cc-with-debug-names/gdb:debug_flags=-gdwarf-5, we get an executable with
a .debug_names section, but no .debug_types section. For dwarf-5, the TUs
are no longer put in a separate unit, but instead they're put in the
.debug_info section.
When loading the executable, the .debug_names section is silently ignored
because of this check in dwarf2_read_debug_names:
...
if (map->tu_count != 0)
{
/* We can only handle a single .debug_types when we have an
index. */
if (per_bfd->types.size () != 1)
return false;
...
which triggers because per_bfd->types.size () == 0.
The intention of the check is to make sure we don't have more that one
.debug_types section, as can happen in a object file (see PR12984):
...
$ grep "\.debug_types" 11.s
.section .debug_types,"G",@progbits,wt.75c042c23a9a07ee,comdat
.section .debug_types,"G",@progbits,wt.c59c413bf50a4607,comdat
...
Fix this by:
- changing the check condition to "per_bfd->types.size () > 1", and
- handling per_bfd->types.size () == 0.
Tested on x86_64-linux.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29385
|
|
Add test-case gdb.dwarf2/debug-names-bad-cu-index.exp, a regression test for
commit 2fe9a3c41fa ("[gdb/symtab] Fix bad compile unit index complaint").
Tested on x86_64-linux.
|
|
Add a test-case gdb.dwarf2/debug-names-tu.exp, that uses the dwarf assembler
to specify a .debug_names index with the TU list referring to a TU from the
.debug_types section.
This is intended to produce something similar to:
...
$ gcc -g -fdebug-types-section ~/hello.c -gdwarf-4
$ gdb-add-index -dwarf-5 a.out
...
Tested on x86_64-linux.
|
