| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
|
|
ui_file_rewind is a ui_file method that only really works with mem
buffer files, and is a nop on other ui_file types. It'd be desirable
to eliminate it from the base ui_file interface, and move it to the
"mem_fileopen" subclass of ui_file instead. A following patch does
just that.
Unfortunately, there are a couple references to ui_file_rewind inside
gdb_disassembler::pretty_print_insn that were made harder to eliminate
with the recent addition of the gdb_disassembler wrapper.
Before the gdb_disassembler wrapper was added, in commit
e47ad6c0bd7aa3 ("Refactor disassembly code"), gdb_pretty_print_insn
used to be passed a ui_file pointer as argument, and it was simple to
adjust that pointer be a "mem_fileopen" ui_file pointer instead, since
there's only one gdb_pretty_print_insn caller.
That commit made gdb_pretty_print_insn be a method of
gdb_disassembler, and removed the method's ui_file parameter at the
same time, replaced by referencing the gdb_disassembler's stream
instead. The trouble is that a gdb_disassembler can be instantiated
with a pointer any kind of ui_file. Casting the gdb_disassembler's
stream to a mem_fileopen ui_file inside
gdb_disassembler::pretty_print_insn in order to call the reset method
would be gross hack.
The fix here is to:
- make gdb_disassembler::pretty_print_insn a be free function again
instead of a method of gdb_disassembler. I.e., bring back
gdb_pretty_print_insn.
- but, don't add back the ui_file * parameter. Instead, move the
mem_fileopen allocation inside. That is a better interface, given
that the ui_file is only ever used as temporary scratch buffer as
an implementation detail of gdb_pretty_print_insn. The function's
real "where to send output" parameter is the ui_out pointer. (A
following patch will add back buffer reuse across invocations
differently).
- don't add back a disassemble_info pointer either. That used to be
necessary for this bit:
err = m_di.read_memory_func (pc, &data, 1, &m_di);
if (err != 0)
m_di.memory_error_func (err, pc, &m_di);
... but AFAIK, it's not really necessary. We can replace those
three lines with a call to read_code. This seems to fix a
regression even, because before commit d8b49cf0c891d0 ("Don't throw
exception in dis_asm_memory_error"), that memory_error_func call
would throw an error/exception, but now it only records the error
in the gdb_disassembler's m_err_memaddr field. (read_code throws
on error.)
With all these, gdb_pretty_print_insn is completely layered on top of
gdb_disassembler only using the latter's public API.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* disasm.c (gdb_disassembler::pretty_print_insn): Rename to...
(gdb_pretty_print_insn): ... this. Now a free function. Add back
a 'gdbarch' parameter. Allocate a mem_fileopen stream here.
Adjust to call gdb_print_insn instead of
gdb_disassembler::print_insn.
(dump_insns, do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly, do_assembly_only): Add back a
'gdbarch' parameter. Remove gdb_disassembler parameter.
(gdb_disassembly): Don't allocate a gdb_disassembler here.
* disasm.h (gdb_disassembler::pretty_print_insn): Delete
declaration.
(gdb_pretty_print_insn): Re-add declaration.
* record-btrace.c (btrace_insn_history): Don't allocate a
gdb_disassembler here. Adjust to call gdb_pretty_print_insn.
|
|
The file_string parameter was added in 8f0eea0 (sorry, no title back
then) and has never actually been used.
gdb/ChangeLog:
* disasm.h (gdb_disassembly): Remove file_string parameter.
* disasm.c (gdb_disassembly): Likewise.
* cli/cli-cmds.c (print_disassembly): Adapt.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Likewise.
* stack.c (do_gdb_disassembly): Likewise.
|
|
When a variable's location is expressed as DW_OP_implicit_value, but the
given value is longer than needed, which bytes should be used? GDB's
current logic was introduced with a patch from 2011 and uses the "least
significant" bytes:
https://sourceware.org/ml/gdb-patches/2011-08/msg00123.html
Now consider a sub-value from such a location at a given offset, accessed
through DW_OP_implicit_pointer. Which bytes should be used for that? The
patch above *always* uses the last bytes on big-endian targets, ignoring
the offset.
E.g., given the code snippet
const char foo[] = "Hello, world!";
const char *a = &foo[0];
const char *b = &foo[7];
assume that `foo' is described as DW_OP_implicit_value and `a' and `b'
each as DW_OP_implicit_pointer into that value. Then with current GDB
`*a' and `*b' yield the same result -- the string's zero terminator.
This patch basically reverts the portion of the patch above that deals
with DW_OP_implicit_value. This fixes the offset handling and also goes
back to dropping the last instead of the first bytes on big-endian targets
if the implicit value is longer than needed. The latter aspect of the
change probably doesn't matter for actual programs, but simplifies the
logic.
The patch also cleans up the original code a bit and adds appropriate test
cases.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-op-stack-value.exp: Adjust expected result of
taking a 2-byte value out of a 4-byte DWARF implicit value on
big-endian targets.
* gdb.dwarf2/nonvar-access.exp: Add more comments to existing
logic. Add test cases for DW_OP_implicit.
gdb/ChangeLog:
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): For
DWARF_VALUE_LITERAL, no longer ignore the offset on big-endian
targets. And if the implicit value is longer than needed, extract
the first bytes instead of the "least significant" ones.
|
|
If GDB is running when gdb_skip_xml_tests is called with
--target_board=native-extended-gdbserer.exp, it fails with:
(gdb) FAIL: ....exp: set tdesc filename .../trivial.xml (got interactive prompt)
monitor exit
Diagnose this in gdb_skip_xml_tests to generate a more meaningful error message:
ERROR: tcl error sourcing ....exp.
ERROR: GDB must not be running in gdb_skip_xml_tests.
while executing
[...]
testsuite/
* lib/gdb.exp (gdb_skip_xml_tests): Error if GDB is running.
|
|
Parts of gdb.btrace/enable.exp are only valid for native debug. The check for
skip_gdbserver_tests is done while GDB is running, though, which causes it to
fail with --target_board=native-extended-gdbserver. Exit GDB before that check.
testsuite/
* gdb.btrace/enable.exp: Call gdb_exit before skip_gdbserver_tests.
|
|
With --target_board=native-extended-gdbserver non-stop tests are failing with
UNTESTED: gdb.btrace/non-stop.exp: failed to run to main
Fix that by adding '-ex "set non-stop on"' to GDBFLAGS before restarting.
testsuite/
* gdb.btrace/non-stop.exp: Add '-ex "set non-stop on"' to GDBFLAGS.
|
|
We may silently skip gdb.btrace tests if
- the target does not support record-btrace
- the target does not support TSX
- the target does not support gdbserver
- we fail to compile the test
- we fail to run to main
Add unsupported/untested messages for each of those.
testsuite/
* gdb.btrace/buffer-size.exp: Add unsupported/untested message if
the test is skipped.
* gdb.btrace/data.exp: Likewise.
* gdb.btrace/delta.exp: Likewise.
* gdb.btrace/dlopen.exp: Likewise.
* gdb.btrace/enable-running.exp: Likewise.
* gdb.btrace/enable.exp: Likewise.
* gdb.btrace/exception.exp: Likewise.
* gdb.btrace/function_call_history.exp: Likewise.
* gdb.btrace/gcore.exp: Likewise.
* gdb.btrace/instruction_history.exp: Likewise.
* gdb.btrace/multi-thread-step.exp: Likewise.
* gdb.btrace/nohist.exp: Likewise.
* gdb.btrace/non-stop.exp: Likewise.
* gdb.btrace/reconnect.exp: Likewise.
* gdb.btrace/record_goto-step.exp: Likewise.
* gdb.btrace/record_goto.exp: Likewise.
* gdb.btrace/rn-dl-bind.exp: Likewise.
* gdb.btrace/segv.exp: Likewise.
* gdb.btrace/step.exp: Likewise.
* gdb.btrace/stepi.exp: Likewise.
* gdb.btrace/tailcall-only.exp: Likewise.
* gdb.btrace/tailcall.exp: Likewise.
* gdb.btrace/tsx.exp: Likewise.
* gdb.btrace/unknown_functions.exp: Likewise.
* gdb.btrace/vdso.exp: Likewise.
|
|
When recording is started for a running thread, GDB was able to start tracing
but then failed to read registers to insert the initial entry for the current
PC. We don't really need that initial entry if we don't know where exactly we
started recording. Skip that step to allow recording to be started while
threads are running.
If we do run into errors, we need to undo the tracing enable to not leak this
thread. The operation did not complete so our caller won't clean up this
thread.
For the BTRACE_FORMAT_PT btrace format, we don't need that initial entry since
it will be recorded in the trace. We can omit the call to btrace_add_pc.
gdb/
* btrace.c (btrace_enable): Do not call btrace_add_pc for
BTRACE_FORMAT_PT or if can_access_registers_ptid returns false.
(btrace_fetch): Assert can_access_registers_ptid.
* record-btrace.c (require_btrace_thread, record_btrace_info): Call
validate_registers_access.
testsuite/
* gdb.btrace/enable-running.c: New.
* gdb.btrace/enable-running.exp: New.
|
|
Add a function can_access_registers_ptid that behaves like
validate_registers_access but returns a boolean value instead of throwing an
exception.
gdb/
* gdbthread.h (can_access_registers_ptid): New.
* thread.c (can_access_registers_ptid): New.
|
|
gdb/ChangeLog:
2017-02-01 Pedro Alves <palves@redhat.com>
* i386-tdep.c (i386_fast_tracepoint_valid_at): Use gdb_insn_length.
|
|
gdb/ChangeLog:
2017-01-31 Pedro Alves <palves@redhat.com>
* mi/mi-interp.c (mi_breakpoint_created, mi_breakpoint_modified):
Fix typos.
|
|
gdb/ChangeLog:
2017-01-31 Pedro Alves <palves@redhat.com>
* stack.c (print_frame_args): Remove local mem_fileopen stream,
not used.
|
|
Whoops, this function returns a std::string.
gdb/ChangeLog:
2017-01-31 Pedro Alves <palves@redhat.com>
* varobj.c (varobj_value_get_print_value): Remove xstrdup call.
|
|
A following patch will want to do
string_file str_file;
scoped_restore save_stdout
= make_scoped_restore (&gdb_stdout, &str_file);
where gdb_stdout is a ui_file *, and string_file is a type that
inherits from ui_file, but that doesn't compile today:
src/gdb/top.c: In function ‘std::__cxx11::string execute_command_to_string(char*, int)’:
src/gdb/top.c:710:50: error: no matching function for call to ‘make_scoped_restore(ui_file**, string_file*)’
= make_scoped_restore (&gdb_stdout, &str_file);
^
[...]
In file included from src/gdb/utils.h:25:0,
from src/gdb/defs.h:732,
from src/gdb/top.c:20:
src/gdb/common/scoped_restore.h:94:24: note: candidate: template<class T> scoped_restore_tmpl<T> make_scoped_restore(T*, T)
scoped_restore_tmpl<T> make_scoped_restore (T *var, T value)
^
src/gdb/common/scoped_restore.h:94:24: note: template argument deduction/substitution failed:
src/gdb/top.c:710:50: note: deduced conflicting types for parameter ‘T’ (‘ui_file*’ and ‘string_file*’)
= make_scoped_restore (&gdb_stdout, &str_file);
^
This commit makes code such as the above possible.
gdb/ChangeLog:
2017-01-31 Pedro Alves <palves@redhat.com>
* common/scoped_restore.h
(scoped_restore_tmpl::scoped_restore_tmpl): Template on T2, and
change the value's parameter type to T2.
(make_scoped_restore): Likewise.
|
|
This patch allows examination of the registers FS_BASE and GS_BASE
for Linux Systems running on 64bit. Tests for simple read and write
of the new registers is also added with this patch.
2017-01-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
Richard Henderson <rth@redhat.com>
gdb/ChangeLog:
* amd64-linux-nat.c (PTRACE_ARCH_PRCTL): New define.
(amd64_linux_fetch_inferior_registers): Add case to fetch FS_BASE
GS_BASE for older kernels.
(amd64_linux_store_inferior_registers): Add case to store FS_BASE
GS_BASE for older kernels.
* amd64-linux-tdep.c (amd64_linux_gregset_reg_offset): Add FS_BASE
and GS_BASE to the offset table.
(amd64_linux_register_reggroup_p): Add FS_BASE and GS_BASE to the
system register group.
* amd64-nat.c (amd64_native_gregset_reg_offset): Implements case
for older kernels.
* amd64-tdep.c (amd64_init_abi): Add segment registers for the
amd64 ABI.
* amd64-tdep.h (amd64_regnum): Add AMD64_FSBASE_REGNUM and
AMD64_GSBASE_REGNUM.
(AMD64_NUM_REGS): Set to AMD64_GSBASE_REGNUM + 1.
* features/Makefile (amd64-linux.dat, amd64-avx-linux.dat)
(amd64-mpx-linux.dat, amd64-avx512-linux.dat, x32-linux.dat)
(x32-avx-linux.dat, x32-avx512-linux.dat): Add
i386/64bit-segments.xml in those rules.
* features/i386/64bit-segments.xml: New file.
* features/i386/amd64-avx-mpx-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-avx-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-avx512-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-mpx-linux.xml: Add 64bit-segments.xml.
* features/i386/x32-avx512-linux.xml: Add 64bit-segments.xml.
* features/i386/x32-avx-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-avx-linux.c: Regenerated.
* features/i386/amd64-avx-mpx-linux.c: Regenerated.
* features/i386/amd64-avx-mpx.c: Regenerated.
* features/i386/amd64-avx512-linux.c: Regenerated.
* features/i386/amd64-linux.c: Regenerated.
* features/i386/amd64-mpx-linux.c: Regenerated.
* features/i386/i386-avx-mpx-linux.c: Regenerated.
* features/i386/i386-avx-mpx.c: Regenerated.
* features/i386/x32-avx-linux.c: Regenerated.
* features/i386/x32-avx512-linux.c: Regenerated.
* regformats/i386/amd64-avx-linux.dat: Regenerated.
* regformats/i386/amd64-avx-mpx-linux.dat: Regenerated.
* regformats/i386/amd64-avx512-linux.dat: Regenerated.
* regformats/i386/amd64-linux.dat: Regenerated.
* regformats/i386/amd64-mpx-linux.dat: Regenerated.
* regformats/i386/x32-avx-linux.dat: Regenerated.
* regformats/i386/x32-avx512-linux.dat: Regenerated.
* regformats/i386/x32-linux.dat: Regenerated.
gdb/doc/ChangeLog:
* gdb.texinfo (i386 Features): Add system segment registers
as feature.
gdb/gdbserver/ChangeLog:
* linux-x86-low.c (x86_64_regmap): Add fs_base and gs_base
to the register table.
(x86_fill_gregset): Add support for old kernels for the
fs_base and gs_base system registers.
(x86_store_gregset): Likewise.
* configure.srv (srv_i386_64bit_xmlfiles): Add 64bit-segments.xml.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-gs_base.c: New file.
* gdb.arch/amd64-gs_base.exp: New file.
Change-Id: I2e0eeb93058a2320d4d3b045082643cfe4aff963
Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com>
|
|
The purpose of this patch is only simplify the addition of new registers.
ORIG_RAX is kept as last register and any addition is done right before it.
2017-01-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM):
Set to AMD64_NUM_REGS.
|
|
Second part of the && is already guaranteed in the "regnum < num_regs"
due to comparison above.
2017-01-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-nat.c (amd64_native_gregset_reg_offset): Simplify logic
that checks validity of a register number.
|
|
The macros mentioned in the title were set only for GDB. In gdbserver they
were not set until now. To align the code in GDB and gdbserver these macros
are also added into gdbserver, enabling read and write of gs_base and fs_base
registers from the system in new and old kernels.
2017-01-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/gdbserver/ChangeLog:
* configure.ac: Check if the fs_base and gs_base members of
`struct user_regs_struct' exist.
* config.in: Regenerated.
* configure: Likewise.
|
|
When running a 32-bit ARM inferior with a 32-bit ARM GDB on a 64-bit
AArch64 host, only VFP registers (NT_ARM_VFP) are available. The FPA
registers (NT_PRFPREG) are not available so GDB must not request them, as
this will fail with -EINVAL. This is most noticeably exposed when running
"generate-core-file":
(gdb) generate-core-file myprog.core
Unable to fetch the floating point registers.: Invalid argument.
ptrace(PTRACE_GETREGSET, 27642, NT_FPREGSET, 0xffcc67f0) = -1 EINVAL (Invalid argument)
gdb/ChangeLog:
2017-01-27 Kees Cook <keescook@google.com>
* gdb/arm-linux-nat.c (arm_linux_fetch_inferior_registers): Call
fetch_fpregs if target has fpa registers.
(arm_linux_store_inferior_registers): Call store_fpregs if target
has fpa registers.
|
|
|
|
With my debug build of Python (--with-pydebug), many tests fails because
of the same issue. Python scripts are loaded by the tests using this
pattern:
(gdb) python exec (open ('file.py').read ())
This causes Python to output this warning:
__main__:1: ResourceWarning: unclosed file <_io.TextIOWrapper name='file.py' mode='r' encoding='ANSI_X3.4-1968'>
and the test to fail because of that extra output. Instead of using the
open + read + exec trick which leaks the file and causes the warning,
why not just source the files?
(gdb) source file.py
This patch changes this, and standardizes the test names of the tests I
touched to "load python file" (some of them were empty, others were
overly complicated).
gdb/testsuite/ChangeLog:
* gdb.python/py-bad-printers.exp: Load python file using "source".
* gdb.python/py-events.exp: Likewise.
* gdb.python/py-evsignal.exp: Likewise.
* gdb.python/py-evthreads.exp: Likewise.
* gdb.python/py-frame-args.exp: Likewise.
* gdb.python/py-framefilter-invalidarg.exp: Likewise.
* gdb.python/py-framefilter-mi.exp: Likewise.
* gdb.python/py-framefilter.exp: Likewise.
* gdb.python/py-mi.exp: Likewise.
* gdb.python/py-pp-maint.exp: Likewise.
* gdb.python/py-pp-registration.exp: Likewise.
* gdb.python/py-prettyprint.exp: Likewise.
(run_lang_tests): Likewise.
* gdb.python/py-typeprint.exp: Likewise.
|
|
* lib/memory.exp: Remove spurious empty newlines.
|
|
Exercising aarch64-elf with a custom debug stub i noticed a few failures in
both gdb.base/breakpoint-in-ro-region.exp and gdb.base/memattr.exp:
FAIL: gdb.base/breakpoint-in-ro-region.exp: create read-only mem region covering main
FAIL: gdb.base/breakpoint-in-ro-region.exp: writing to read-only memory fails
FAIL: gdb.base/breakpoint-in-ro-region.exp: inserting software breakpoint in read-only memory fails
FAIL: gdb.base/memattr.exp: create mem region 1
FAIL: gdb.base/memattr.exp: create mem region 2
FAIL: gdb.base/memattr.exp: create mem region 3
FAIL: gdb.base/memattr.exp: create mem region 4
FAIL: gdb.base/memattr.exp: create mem region 5
FAIL: gdb.base/memattr.exp: info mem (1)
FAIL: gdb.base/memattr.exp: mem1 cannot be read
FAIL: gdb.base/memattr.exp: mem2 cannot be written
FAIL: gdb.base/memattr.exp: mem2 can be read
FAIL: gdb.base/memattr.exp: disable mem 1
FAIL: gdb.base/memattr.exp: mem 1 was disabled
FAIL: gdb.base/memattr.exp: enable mem 1
FAIL: gdb.base/memattr.exp: mem 1 was enabled
FAIL: gdb.base/memattr.exp: disable mem 2 4
FAIL: gdb.base/memattr.exp: mem 2 and 4 were disabled
FAIL: gdb.base/memattr.exp: enable mem 2-4
FAIL: gdb.base/memattr.exp: mem 2-4 were enabled
FAIL: gdb.base/memattr.exp: mem 1 to 5 were disabled
FAIL: gdb.base/memattr.exp: mem 1 to 5 were enabled
FAIL: gdb.base/memattr.exp: delete mem 1
FAIL: gdb.base/memattr.exp: mem 1 was deleted
FAIL: gdb.base/memattr.exp: delete mem 2 4
FAIL: gdb.base/memattr.exp: mem 2 and 4 were deleted
FAIL: gdb.base/memattr.exp: mem 2-4 were deleted
These failures don't show up with gdbserver or native gdb on Linux because
they don't export any memory maps, therefore the vector of memory regions is
empty.
Outside of that scenario, we can't guarantee the absence of memory regions
reported by the target upon a connection. In our particular target, we
provide a memory map and the memory regions vector ceases to be empty.
With a non-empty memory regions vector, manipulating memory regions will cause
gdb to be more verbose and output text. For example:
memattr.c:require_user_regions
/* Otherwise, let the user know how to get back. */
if (from_tty)
warning (_("Switching to manual control of memory regions; use "
"\"mem auto\" to fetch regions from the target again."));
memattr.c:create_mem_region
if ((lo >= n->lo && (lo < n->hi || n->hi == 0))
|| (hi > n->lo && (hi <= n->hi || n->hi == 0))
|| (lo <= n->lo && ((hi >= n->hi && n->hi != 0) || hi == 0)))
{
printf_unfiltered (_("overlapping memory region\n"));
return;
}
In my particular case i got both of the above messages.
In order to fix this, i've moved the delete_memory proc from
gdb.base/memattr.exp to a new file lib/memory.exp and made lib/gdb.exp
load that file.
For both gdb.base/breakpoint-in-ro-region.exp and gdb.base/memattr.exp the
patch clears all existing memory regions after running to main. That way we
are guaranteed to have a clean state for memory regions so the tests can
exercise whatever they want and have an expected output pattern.
Regression checked on x86-64/Ubuntu 16.04.
gdb/testsuite/ChangeLog:
2017-01-26 Luis Machado <lgustavo@codesourcery.com>
* lib/memory.exp: New file.
* lib/gdb.exp: Load memory.exp.
* gdb.base/memattr.exp (delete_memory): Move proc to
lib/memory.exp and rename to delete_memory_regions.
Replace delete_memory with delete_memory_regions.
Cleanup memory regions before tests.
* gdb.base/breakpoint-in-ro-region.exp: Cleanup memory regions
before tests.
|
|
The all-architectures-1.exp test case currently yields 66 FAILs on s390x,
because the "set architecture" command fails each time when attempting to
switch to "cris", "crisv32", or "cris:common_v10_v32". Actually, the
command would succeed if the endianness had been set to "little" before.
Instead, the test case sets the endianness to "auto", which results in
"big" on s390x.
So on x86_64:
(gdb) set endian auto
The target endianness is set automatically (currently little endian)
(gdb) set architecture cris
warning: A handler for the OS ABI "AIX" is not built into this configuration
of GDB. Attempting to continue with the default cris settings.
The target architecture is assumed to be cris
But on s390x:
(gdb) set endian auto
The target endianness is set automatically (currently big endian)
(gdb) set architecture cris
Architecture `cris' not recognized.
See also the test results for s390x and ppc64be:
https://sourceware.org/ml/gdb-testers/2016-q4/msg05150.html
https://sourceware.org/ml/gdb-testers/2016-q4/msg05713.html
Indeed, cris_gdbarch_init in cris-tdep.c returns a failure unless the
user-specified endianness is "little". Other architectures usually ignore
the user-specified endianness and return a valid gdbarch anyhow, even if
they can not really cope with the given endianness.
This patch removes the check in cris-tdep.c and forces little-endian byte
order instead.
gdb/ChangeLog:
* cris-tdep.c (cris_gdbarch_init): Remove check for
info.byte_order and force it to BFD_ENDIAN_LITTLE.
|
|
This adds the missing testsuite files and Changelog entry.
|
|
Changes in v2:
- Renamed arch-specific files to insn-reverse-<arch>.c.
- Adjusted according to reviews.
This patch prepares things for an upcoming testcase for record/replay support
on x86. As is, gdb.reverse/insn-reverse.c is divided into sections guarded by
a few #if blocks, and right now it only handles arm/aarch64.
If we move forward with requiring more tests for record/replay on different
architectures, i think this has the potential to become cluttered with a lot
of differing arch-specific code in the same file.
I've broken up the main file into other files with arch-specific bits
(insn-reverse-<arch>.c). The main file will hold the generic pieces that will
take care of calling the tests.
The arch-specific c files are then included at the top of the generic c file.
I've also added a generic initialize function since we need to run pre-test
checks on x86 to make sure the rdrand/rdseed instructions are supported,
otherwise we will run into a SIGILL.
The arch-specific files will implement their own initialize function with
whatever makes sense. Right now the aarch64 and arm files have an empty
initialization function.
Does this look reasonable?
gdb/testsuite/ChangeLog:
2017-01-26 Luis Machado <lgustavo@codesourcery.com>
* gdb.reverse/insn-reverse.c: Move arm and aarch64 code to their own
files.
(initialize): New function conditionally defined.
(testcases): Move within conditional block.
(main): Call initialize.
* gdb.reverse/insn-reverse-aarch64.c: New file, based on aarch64 bits
of gdb.reverse/insn-reverse.c.
* gdb.reverse/insn-reverse-arm.c: New file, based on arm bits of
gdb.reverse/insn-reverse.c.
|
|
When loading a core without an executable like so:
$ gdb --core core
for example often the gdbarch won't contain the
iterate_over_regset_sections method. For example on ARM.
This will generate a call to get_core_register_section with a NULL regset
like at corelow.c:628
get_core_register_section (regcache, NULL, ".reg", 0, 0, "general-purpose", 1);
However a check for REGSET_VARIABLE_SIZE in get_core_register_section
assumes that regset is != NULL thus leading to a crash with this backtrace:
(gdb) bt
#0 0x000000000065907b in get_core_register_section
(regcache=regcache@entry=0x2c26260, regset=regset@entry=0x0,
name=name@entry=0xdbf7b2 ".reg", min_size=min_size@entry=0,
which=which@entry=0, human_name=human_name@entry=0xdbac28
"general-purpose", required=1)
at ../../gdb/corelow.c:542
#1 0x0000000000659b70 in get_core_registers (ops=<optimized out>,
regcache=0x2c26260, regno=<optimized out>) at ../../gdb/corelow.c:628
#2 0x000000000076e5fb in target_fetch_registers
(regcache=regcache@entry=0x2c26260, regno=regno@entry=15)
at ../../gdb/target.c:3590
Note that commit: f962539ad23759 ("Warn if core file register
section is larger than expected") introduced this issue.
Thus releases > 7.8.2 are affected.
Also, this would have been caught by gdb.base/corefile.exp but the
problem is that this triggers only if the core dump is missing some data
so that it's not recognized as a linux core dump, or it's not a linux core
dump and the core file register section is larger than expected.
So if you just create a core and read it on linux with ARM the osabi is
detected properly and iterate_over_regset_sections is present and so the
problem is not triggered.
Thus creating a linux test for this with a crafted core that meets the
problem requirements is non-trivial.
This patch fixes this crash by adding a check for regset existence before
running the condition.
gdb/ChangeLog:
* corelow.c (get_core_register_section): Check for regset
existence before checking for REGSET_VARIABLE_SIZE.
|
|
Hi,
GDB calls some APIs from opcodes to do disassembly and provide some
call backs. This model makes troubles on C++ exception unwinding,
because GDB is a C++ program, and opcodes is still compiled as C.
As we can see, frame #10 and #12 are C++, while #frame 11 is C,
#10 0x0000000000544228 in memory_error (err=TARGET_XFER_E_IO, memaddr=<optimized out>) at ../../binutils-gdb/gdb/corefile.c:237
#11 0x00000000006b0a54 in print_insn_aarch64 (pc=0, info=0xffffffffeeb0) at ../../binutils-gdb/opcodes/aarch64-dis.c:3185
#12 0x0000000000553590 in gdb_pretty_print_insn (gdbarch=gdbarch@entry=0xbbceb0, uiout=uiout@entry=0xbc73d0, di=di@entry=0xffffffffeeb0,
insn=0xffffffffed40, insn@entry=0xffffffffed90, flags=flags@entry=0,
C++ exception unwinder can't go across frame #11 unless it has
unwind table. However, C program on many architectures doesn't
have it in default. As a result, GDB aborts, which is described
in PR 20939.
This is not the first time we see this kind of problem. We've
had a commit 89525768cd086a0798a504c81fdf7ebcd4c904e1
"Propagate GDB/C++ exceptions across readline using sj/lj-based TRY/CATCH".
We can fix the disassembly bug in a similar way, this is the option one.
Since opcodes is built with gdb, we fix this problem in a different
way as we did for the same issue with readline. Instead of throwing
exception in dis_asm_memory_error, we record the failed memory
address, and throw exception when GDB returns from opcodes disassemblers.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
PR gdb/20939
* disasm.c (gdb_disassembler::dis_asm_memory_error): Don't
call memory_error, save memaddr instead.
(gdb_disassembler::print_insn): If gdbarch_print_insn returns
negative, cal memory_error.
* disasm.h (gdb_disassembler) <m_err_memaddr>: New field.
gdb/testsuite:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* gdb.base/all-architectures.exp.in (do_arch_tests): Test
disassemble on address 0.
|
|
This patch adds a unit test about memory error occurs on reading
memory, and check MEMORY_ERROR exception is always thrown.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* disasm-selftests.c (memory_error_test): New function.
(_initialize_disasm_selftests): Register memory_error_test.
|
|
This patch adds one unit test, which disassemble one instruction for
every gdbarch if available. The test needs one valid instruction of
each gdbarch, and most of them are got from breakpoint instruction.
For the rest gdbarch whose breakpoint instruction isn't a valid
instruction, I copy one instruction from the gas/testsuite/gas/
directory.
I get the valid instruction of most gdbarch except ia64, mep, mips,
tic6x, and xtensa. People familiar with these arch should be easy
to extend the test.
In order to achieve "do the unit test for every gdbarch", I add
selftest-arch.[c,h], so that we can register a function pointer,
which has one argument gdbarch. selftest.c will iterate over all
gdbarches to call the registered function pointer.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* Makefile.in (SFILES): Add disasm-selftests.c and
selftest-arch.c.
(COMMON_OBS): Add disasm-selftests.o and selftest-arch.o.
* disasm-selftests.c: New file.
* selftest-arch.c: New file.
* selftest-arch.h: New file.
|
|
opcodes/mep-dis.c:mep_print_insn has already had the code to
handle the case when info->section is NULL,
/* Picking the right ISA bitmask for the current context is tricky. */
if (info->section)
{
}
else /* sid or gdb */
{
}
so that we can still cal print_insn_mep even section can't be found.
On the other hand, user can disassemble an arbitrary address which
doesn't map to any section at all.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* mep-tdep.c (mep_gdb_print_insn): Set info->arch
to bfd_arch_mep. Don't return 0 if section is not
found. Call print_insn_mep.
|
|
This patch addes class gdb_disassembler, and refactor
code to use it. The gdb_disassembler object is saved
in disassember_info.application_data. However,
disassember_info.application_data is already used by
gdb for arm, mips spu, and scm-disasm. In arm and mips,
.application_data is gdbarch, but we can still get gdbarch
from gdb_disassember.
The use of application_data in spu is a little bit
complicated. It creates its own disassemble_info, and
save spu_dis_asm_data in .application_data. This will
overwrite the pointer to gdb_disassembler, so we need
to find another place to save spu_dis_asm_data. I
extend disassemble_info, and put "id" there.
gdb:
2017-01-26 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* arm-tdep.c: Include "disasm.h".
(gdb_print_insn_arm): Update code to get gdbarch.
* disasm.c (dis_asm_read_memory): Change it to
gdb_disassembler::dis_asm_read_memory.
(dis_asm_memory_error): Likewise.
(dis_asm_print_address): Likewise.
(gdb_pretty_print_insn): Change it to
gdb_disassembler::pretty_print_insn.
(dump_insns): Add one argument gdb_disassemlber. All
callers updated.
(do_mixed_source_and_assembly_deprecated): Likewise.
(do_mixed_source_and_assembly): Likewise.
(do_assembly_only): Likewise.
(gdb_disassembler::gdb_disassembler): New.
(gdb_disassembler::print_insn): New.
* disasm.h (class gdb_disassembler): New.
(gdb_pretty_print_insn): Remove declaration.
(gdb_disassemble_info): Likewise.
* guile/scm-disasm.c (class gdbscm_disassembler): New.
(gdbscm_disasm_read_memory_worker): Update.
(gdbscm_disasm_read_memory): Update.
(gdbscm_disasm_memory_error): Remove.
(gdbscm_disasm_print_address): Remove.
(gdbscm_disassembler::gdbscm_disassembler): New.
(gdbscm_print_insn_from_port): Update.
* mips-tdep.c: Include disasm.h.
(gdb_print_insn_mips): Update code to get gdbarch.
* record-btrace.c (btrace_insn_history): Update.
* spu-tdep.c: Include disasm.h.
(struct spu_dis_asm_data): Remove.
(struct spu_dis_asm_info): New.
(spu_dis_asm_print_address): Use spu_dis_asm_info to get
SPU id.
(gdb_print_insn_spu): Cast disassemble_info to
spu_dis_asm_info.
|
|
This patch adds a new function null_stream, which returns a null
stream. The null stream can be used in multiple places. It is
used in gdb_insn_length, and the following patches will use it too.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* disasm.c (do_ui_file_delete): Delete.
(gdb_insn_length): Move code creating stream to ...
* utils.c (null_stream): ... here. New function.
* utils.h (null_stream): Declare.
|
|
This patch adds a DW_OP_implicit_value in dwarf assembler, and uses
dwarf assembler in implptr-64bit.exp. Using dwarf assembler in
implptr-64bit.exp exposes some limitations in dwarf assembler,
- some variables are not evaluated in the caller's context, so we
can not pass variable to assembler, like this
Dwarf::assemble $asm_file {
cu {
version $dwarf_version
addr_size $addr_size
is_64 $is_64
} {
}
and
{DW_AT_type :$struct_label "DW_FORM_ref$ref_addr_size"}
this limitation is fixed by adding "uplevel" and "subst".
- dwarf assembler doesn't emit DW_FORM_ref_addr for label referencing.
this limitation is fixed by adding a new character "%",
{ type %$int_label }
this means we want to emit DW_FORM_ref_addr for label referencing.
- we can't set the form of label referencing offset in dwarf assembler.
Nowadays, dwarf assembler guesses the form of labels, which is
DW_FORM_ref4. However, in implptr-64bit.exp, both DW_FORM_ref4
and DW_FORM_ref8 is used (see REF_ADDR in implptr-64bit.S). This
patch adds the flexibility of setting the form of label reference.
Both of them below are valid,
{DW_AT_type :$struct_label}
{DW_AT_type :$struct_label DW_FORM_ref8}
the former form is the default DW_FORM_ref4.
I compared the .debug_info of objects without and with this patch
applied. There is no changes except abbrev numbers.
gdb/testsuite:
2017-01-25 Andreas Arnez <arnez@linux.vnet.ibm.com>
Yao Qi <yao.qi@linaro.org>
* gdb.dwarf2/implptr-64bit.exp: Use dwarf assembler.
* gdb.dwarf2/implptr-64bit.S: Remove.
* lib/dwarf.exp (Dwarf): Handle character "%". Evaluate some
variables in caller's context. Add DW_OP_implicit_value.
|
|
DW_OP_GNU_implicit_pointer refers to a DIE with an offset of different
sizes in different dwarf versions. In v2, the size is the pointer size,
while in v3 and above, it is the ref_addr size. This patch fixes
dwarf assembler to emit the correct size of offset. We've already fixed
this size issue in gdb,
https://sourceware.org/ml/gdb-patches/2011-09/msg00451.html
gdb/testsuite:
2017-01-25 Yao Qi <yao.qi@linaro.org>
* lib/dwarf.exp (Dwarf::_location): Handle
DW_OP_GNU_implicit_pointer with proper size.
|
|
The field "inferior" of the ExitedEvent object is not displayed
properly.
gdb/doc/ChangeLog:
* python.texi (Events In Python): Fix typo.
|
|
Since the reference to the Inferior Python object is managed by
gdbpy_ref (RAII), we can return directly from the loop. It's just a
leftover from the cleanups era.
gdb/ChangeLog:
* python/py-inferior.c (find_thread_object): Return directly
from the loop. Remove "found" variable.
|
|
gdb/ChangeLog:
GDB 7.12.1 released.
|
|
When the gdbpy_ref objects get destroyed, they call Py_DECREF to
decrement the reference counter of the python object they hold a
reference to. Any time we call into the Python API, we should be
holding the GIL. The gdbpy_enter object does that for us in an
RAII-fashion.
However, if gdbpy_enter is declared after a gdbpy_ref object in a
function, gdbpy_enter's destructor will be called (and the GIL will be
released) before gdbpy_ref's destructor is called. Therefore, we will
end up calling Py_DECREF without holding the GIL.
This became obvious with Python 3.6, where memory management functions
have asserts to make sure that the GIL is held. This was exposed by
tests py-as-string.exp, py-function.exp and py-xmethods. For example:
(gdb) p $_as_string(enum_valid)
Fatal Python error: Python memory allocator called without holding the GIL
Current thread 0x00007f7f7b21c780 (most recent call first):
[1] 18678 abort (core dumped) ./gdb -nx testsuite/outputs/gdb.python/py-as-string/py-as-string
#0 0x00007ffff618bc37 in raise () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x00007ffff618f028 in abort () from /lib/x86_64-linux-gnu/libc.so.6
#2 0x00007ffff6b104d6 in Py_FatalError (msg=msg@entry=0x7ffff6ba15b8 "Python memory allocator called without holding the GIL") at Python/pylifecycle.c:1457
#3 0x00007ffff6a37a68 in _PyMem_DebugCheckGIL () at Objects/obmalloc.c:1972
#4 0x00007ffff6a3804e in _PyMem_DebugFree (ctx=0x7ffff6e65290 <_PyMem_Debug+48>, ptr=0x24f8830) at Objects/obmalloc.c:1994
#5 0x00007ffff6a38e1d in PyMem_Free (ptr=<optimized out>) at Objects/obmalloc.c:442
#6 0x00007ffff6b866c6 in _PyFaulthandler_Fini () at ./Modules/faulthandler.c:1369
#7 0x00007ffff6b104bd in Py_FatalError (msg=msg@entry=0x7ffff6ba15b8 "Python memory allocator called without holding the GIL") at Python/pylifecycle.c:1431
#8 0x00007ffff6a37a68 in _PyMem_DebugCheckGIL () at Objects/obmalloc.c:1972
#9 0x00007ffff6a3804e in _PyMem_DebugFree (ctx=0x7ffff6e652c0 <_PyMem_Debug+96>, ptr=0x7ffff46b6040) at Objects/obmalloc.c:1994
#10 0x00007ffff6a38f55 in PyObject_Free (ptr=<optimized out>) at Objects/obmalloc.c:503
#11 0x00007ffff6a5f27e in unicode_dealloc (unicode=unicode@entry=0x7ffff46b6040) at Objects/unicodeobject.c:1794
#12 0x00007ffff6a352a9 in _Py_Dealloc (op=0x7ffff46b6040) at Objects/object.c:1786
#13 0x000000000063f28b in gdb_Py_DECREF (op=0x7ffff46b6040) at /home/emaisin/src/binutils-gdb/gdb/python/python-internal.h:192
#14 0x000000000063fa33 in gdbpy_ref_policy::decref (ptr=0x7ffff46b6040) at /home/emaisin/src/binutils-gdb/gdb/python/py-ref.h:35
#15 0x000000000063fa77 in gdb::ref_ptr<_object, gdbpy_ref_policy>::~ref_ptr (this=0x7fffffffcdf0, __in_chrg=<optimized out>) at /home/emaisin/src/binutils-gdb/gdb/common/gdb_ref_ptr.h:91
#16 0x000000000064d8b8 in fnpy_call (gdbarch=0x2b50010, language=0x115d2c0 <c_language_defn>, cookie=0x7ffff46b7468, argc=1, argv=0x7fffffffcf48)
at /home/emaisin/src/binutils-gdb/gdb/python/py-function.c:145
The fix is to place the gdbpy_enter first in the function. I also
cleaned up the comments a bit and removed the unnecessary initialization
of the value variable.
gdb/ChangeLog:
* python/py-function.c (fnpy_call): Reorder declarations to have
the gdbpy_enter object declared first.
* python/py-xmethods.c (gdbpy_get_xmethod_arg_types): Likewise.
|
|
|
|
New in v2:
- Define PyMem_RawMalloc as PyMem_Malloc for Python < 3.4 and use
PyMem_RawMalloc in the code.
Since Python 3.4, the callback installed in PyOS_ReadlineFunctionPointer
should return a value allocated with PyMem_RawMalloc instead of
PyMem_Malloc. The reason is that PyMem_Malloc must be called with the
Python Global Interpreter Lock (GIL) held, which is not the case in the
context where this function is called. PyMem_RawMalloc was introduced
for cases like this.
In Python 3.6, it looks like they added an assert to verify that
PyMem_Malloc was not called without the GIL. The consequence is that
typing anything in the python-interactive mode of gdb crashes the
process. The same behavior was observed with the official package on
Arch Linux as well as with a manual Python build on Ubuntu 14.04.
This is what is shown with a debug build of Python 3.6 (the error with a
non-debug build is far less clear):
(gdb) pi
>>> print(1)
Fatal Python error: Python memory allocator called without holding the GIL
Current thread 0x00007f1459af8780 (most recent call first):
[1] 21326 abort ./gdb
and the backtrace:
#0 0x00007ffff618bc37 in raise () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x00007ffff618f028 in abort () from /lib/x86_64-linux-gnu/libc.so.6
#2 0x00007ffff6b104d6 in Py_FatalError (msg=msg@entry=0x7ffff6ba15b8 "Python memory allocator called without holding the GIL") at Python/pylifecycle.c:1457
#3 0x00007ffff6a37a68 in _PyMem_DebugCheckGIL () at Objects/obmalloc.c:1972
#4 0x00007ffff6a3804e in _PyMem_DebugFree (ctx=0x7ffff6e65290 <_PyMem_Debug+48>, ptr=0x24f8830) at Objects/obmalloc.c:1994
#5 0x00007ffff6a38e1d in PyMem_Free (ptr=<optimized out>) at Objects/obmalloc.c:442
#6 0x00007ffff6b866c6 in _PyFaulthandler_Fini () at ./Modules/faulthandler.c:1369
#7 0x00007ffff6b104bd in Py_FatalError (msg=msg@entry=0x7ffff6ba15b8 "Python memory allocator called without holding the GIL") at Python/pylifecycle.c:1431
#8 0x00007ffff6a37a68 in _PyMem_DebugCheckGIL () at Objects/obmalloc.c:1972
#9 0x00007ffff6a37aa3 in _PyMem_DebugMalloc (ctx=0x7ffff6e65290 <_PyMem_Debug+48>, nbytes=5) at Objects/obmalloc.c:1980
#10 0x00007ffff6a38d91 in PyMem_Malloc (size=<optimized out>) at Objects/obmalloc.c:418
#11 0x000000000064dbe2 in gdbpy_readline_wrapper (sys_stdin=0x7ffff6514640 <_IO_2_1_stdin_>, sys_stdout=0x7ffff6514400 <_IO_2_1_stdout_>, prompt=0x7ffff4d4f7d0 ">>> ")
at /home/emaisin/src/binutils-gdb/gdb/python/py-gdb-readline.c:75
The documentation is very clear about it [1] and it was also mentioned
in the "What's New In Python 3.4" page [2].
[1] https://docs.python.org/3/c-api/veryhigh.html#c.PyOS_ReadlineFunctionPointer
[2] https://docs.python.org/3/whatsnew/3.4.html#changes-in-the-c-api
gdb/ChangeLog:
* python/python-internal.h (PyMem_RawMalloc): Define for
Python < 3.4.
* python/py-gdb-readline.c (gdbpy_readline_wrapper): Use
PyMem_RawMalloc instead of PyMem_Malloc.
|
|
Some leftover uppercase test names in py-xmethods.exp. The patch also
replaces two "continue" calls with untested calls to make things a bit more
clear.
gdb/testsuite/ChangeLog:
2017-01-20 Luis Machado <lgustavo@codesourcery.com>
* gdb.python/py-xmethods.exp: Fix test names starting with lowercase
and add untested calls.
|
|
I noticed gdb.python/python.exp failing on aarch64-elf like so:
FAIL: gdb.python/python.exp: Test decode_line func1 line number
This particular test expects the line number for func1 to be 19, hardcoded.
In my aarch64-elf tests gdb thinks func1 is at line 20, making the test fail.
The following patch addresses this by reading the line number information from
GDB and comparing it against the python decoded symtab information.
gdb/testsuite/ChangeLog:
2017-01-20 Luis Machado <lgustavo@codesourcery.com>
* gdb.python/python.exp: Check line number against what GDB thinks
the line number is for func1.
|
|
Changes in v4:
- Replaced phex call with hex_string.
Changes in v3:
- Addressed comments by Pedro.
- Output of memory region size now in hex format.
- Misc formatting fixups.
- Addressed Simon's comments on formatting.
- Adjusted command text in the manual entry.
- Fixed up ChangeLog.
- Renamed flash_erase_all_command to flash_erase_command.
Changes in v2:
- Added NEWS entry.
- Fixed long lines.
- Address printing with paddress.
Years ago we contributed flash programming patches upstream. The following
patch is a leftover one that complements that functionality by adding a new
command to erase all reported flash memory blocks.
The command is most useful when we're dealing with flash-enabled targets
(mostly bare-metal) and we need to reset the board for some reason.
The wiping out of flash memory regions should help the target come up with a
known clean state from which the user can load a new image and resume
debugging. It is convenient enough to do this from the debugger, and there is
also an MI command to expose this functionality to the IDE's.
gdb/doc/ChangeLog:
2017-01-20 Mike Wrighton <mike_wrighton@codesourcery.com>
Luis Machado <lgustavo@codesourcery.com>
* gdb.texinfo (-target-flash-erase): New MI command description.
(flash-erase): New CLI command description.
gdb/ChangeLog:
2017-01-20 Mike Wrighton <mike_wrighton@codesourcery.com>
Luis Machado <lgustavo@codesourcery.com>
* NEWS (New commands): Mention flash-erase.
(New MI commands): Mention target-flash-erase.
* mi/mi-cmds.c (mi_cmd_target_flash_erase): Add target-flash-erase MI
command.
* mi/mi-cmds.h (mi_cmd_target_flash_erase): New declaration.
* mi/mi-main.c (mi_cmd_target_flash_erase): New function.
* target.c (flash_erase_command): New function.
(initialize_targets): Add new flash-erase command.
* target.h (flash_erase_command): New declaration.
|
|
The following change replaced an include of gregset.h by
an include of <sys/procfs.h>:
commit 39b22471578843019026c50fcdbe0483a6045970
Date: Thu Aug 11 12:01:22 2016 +0100
Subject: Fix fallout from gdb/20413's fix
(x32: linux_ptrace_test_ret_to_nx: Cannot PTRACE_PEEKUSER)
Unfortunately, this broke gdbserver on Android, because that file
does not exist on this platform. This patch fixes the issue by
conditionalizing its include with HAVE_SYS_PROCFS_H (which we check
both in gdb/configure and gdbserver/configure).
gdb/ChangeLog:
* nat/linux-ptrace.c: Only include <sys/procfs.h> if
HAVE_SYS_PROCFS_H is defined.
Tested by rebuilding gdbserver on arm-android and GNU/Linux.
|
|
2017-01-18 Alan Hayward <alan.hayward@arm.com>
* remote.c (struct cached_reg): Change data into a pointer.
* (stop_reply_dtr): Free data pointers before deleting vector.
(process_stop_reply): Likewise.
(remote_parse_stop_reply): Allocate space for data
|
|
2017-01-18 Alan Hayward <alan.hayward@arm.com>
* amd64-tdep.c (amd64_pseudo_register_read_value): remove
MAX_REGISTER_SIZE.
(amd64_pseudo_register_read_value): Likewise.
* remote.c (fetch_register_using_p): Remove MAX_REGISTER_SIZE.
(store_register_using_P): Likewise.
* regcache.c (regcache_xfer_part): Likewise.
|
|
gdb/ChangeLog:
2017-01-16 Ivo Raisr <ivo.raisr@oracle.com>
Split real and pseudo registers.
* sparc-tdep.h (SPARC_CORE_REGISTERS): New macro.
(sparc32_pseudo_regnum): New enum.
* sparc64-tdep.h (sparc64_pseudo_regnum): New enum.
* sparc-tdep.c (SPARC32_FPU_REGISTERS): New macro.
(SPARC32_CP0_REGISTERS): New macro.
(sparc32_pseudo_register_name): New function.
(sparc32_register_name): Use sparc32_pseudo_register_name.
(sparc32_pseudo_register_type): New function.
(sparc32_register_type): Use sparc32_pseudo_register_type.
(sparc32_pseudo_register_read, sparc32_pseudo_register_write): Handle
pseudo register numbers.
* sparc64-tdep.c SPARC64_FPU_REGISTERS): New macro.
(SPARC64_CP0_REGISTERS): New macro.
(sparc64_pseudo_register_name): New function.
(sparc64_register_name): Use sparc64_pseudo_register_name.
(sparc64_pseudo_register_type): New function.
(sparc64_register_type): Use sparc64_pseudo_register_type.
(sparc64_pseudo_register_read, sparc64_pseudo_register_write): Handle
pseudo register numbers.
(sparc64_store_floating_fields, sparc64_extract_floating_fields,
sparc64_store_arguments): Handle pseudo register numbers.
|
|
If we turn "remote debug" on and GDB does some vFile operations,
a lot of things will be printed in the screen, which makes
"remote debug" useless.
This patch changes the code that we only print 512 chars in max in
debugging messages, like this,
Sending packet: $qXfer:features:read:target.xml:0,fff#7d...Packet received: l<?xml version="1.0"?>\n<!-- Copyright (C) 2010-2016 Free Software Foundation, Inc.\n\n Copying and distribution of this file, with or without modification,\n are permitted in any medium without royalty provided the copyright\n notice and this notice are preserved. -->\n\n<!-- AMD64 with AVX - Includes Linux-only special "register". -->\n\n<!DOCTYPE target SYSTEM "gdb-target.dtd">\n<target>\n <architecture>i386:x86-64</architecture>\n <osabi>GNU/Linux</osabi>\n <xi:include href="64bit-core.xml"/>\n <xi:[14 bytes omitted]
Sending packet: $qXfer:auxv:read::0,1000#6b...Packet received: l!\000\000\000\000\000\000\000\000d\000\000\000\000\000\000\000\003\000\000\000\000\000\000\000@\000@\000\000\000\000\000\004\000\000\000\000\000\000\0008\000\000\000\000\000\000\000\005\000\000\000\000\000\000\000\t\000\000\000\000\000\000\000\a\000\000\000\000\000\000\000\177\000\000\b\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\t\000\000\000\000\000\000\000\000\004@\000\000\000\000\000\013\000\000\000\000\000\000\003\000\000\000\000\000\000\f\000\000\000\000\000\000\003\000\000\000\000\000\000\r\000\000\000\000\000\000\003\000\000\000\000\000\000\016\000\000\000\000\000\000\003\000\000\000\000\000\000\027\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\031\000\000\000\000\000\000\177\000\000\037\000\000\000\000\000\000\000\000\017\000\000\000\000\000\000\00\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000[582 bytes omitted]
gdb:
2017-01-13 Yao Qi <yao.qi@linaro.org>
* remote.c (REMOTE_DEBUG_MAX_CHAR): New macro.
(putpkt_binary): Print only REMOTE_DEBUG_MAX_CHAR chars in debug
output.
(getpkt_or_notif_sane_1): Likewise.
|
