| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch improves the loop_break and loop_continue tests to verify
that they work as expected when multiple loops are nested (they affect
the inner loop).
gdb/testsuite/ChangeLog:
* gdb.base/commands.exp (loop_break_test, loop_continue_test):
Test with nested loops.
|
|
For some reason I ended up staring at some of the "int flags" in
btrace-related code, and I got confused because I had no clue what the
flags where supposed to indicate.
Fix that by using enum_flags, so that:
#1 - it's clear from the type what the flags are about, and
#2 - the compiler can catch mismatching mistakes
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (print_disassembly, disassemble_current_function)
(disassemble_command): Use gdb_disassembly_flags instead of bare
int.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn)
(dump_insns, do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly, do_assembly_only, gdb_disassembly):
Use gdb_disassembly_flags instead of bare int.
* disasm.h (DISASSEMBLY_SOURCE_DEPRECATED, DISASSEMBLY_RAW_INSN)
(DISASSEMBLY_OMIT_FNAME, DISASSEMBLY_FILENAME)
(DISASSEMBLY_OMIT_PC, DISASSEMBLY_SOURCE)
(DISASSEMBLY_SPECULATIVE): No longer macros. Instead they're...
(enum gdb_disassembly_flag): ... values of this new enumeration.
(gdb_disassembly_flags): Define.
(gdb_disassembly)
(gdb_pretty_print_disassembler::pretty_print_insn): Use it.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Use
gdb_disassembly_flags instead of bare int.
* record-btrace.c (btrace_insn_history)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from): Use gdb_disassembly_flags
instead of bare int.
* record.c (get_insn_history_modifiers, cmd_record_insn_history):
Use gdb_disassembly_flags instead of bare int.
* target-debug.h (target_debug_print_gdb_disassembly_flags):
Define.
* target-delegates.c: Regenerate.
* target.c (target_insn_history, target_insn_history_from)
(target_insn_history_range): Use gdb_disassembly_flags instead of
bare int.
* target.h: Include "disasm.h".
(struct target_ops) <to_insn_history, to_insn_history_from,
to_insn_history_range>: Use gdb_disassembly_flags instead of bare
int.
(target_insn_history, target_insn_history_from)
(target_insn_history_range): Use gdb_disassembly_flags instead of
bare int.
|
|
I grepped the testsuite for loop_break and loop_continue and didn't find
anything, so I wrote some simple tests for those.
gdb/testsuite/ChangeLog:
* gdb.base/commands.exp: Call the new procedures.
(loop_break_test, loop_continue_test): New procedures.
|
|
When using "if" (or while) without args directly on gdb's command line,
you get this:
(gdb) if
if/while commands require arguments
When doing the same when entering a command list, you only get an error
when the command is executed, when parse_exp_in_context_1 fails to
evaluate the expression.
(gdb) define foo
Type commands for definition of "foo".
End with a line saying just "end".
>if
>end
>end
(gdb) foo
Argument required (expression to compute).
I think it would make more sense to error out when inputting the command
list directly:
(gdb) define foo
Type commands for definition of "foo".
End with a line saying just "end".
>if
if/while commands require arguments.
The only required change is to check whether args is an empty string in
build_command_line.
gdb/ChangeLog:
* cli/cli-script.c (build_command_line): For if/while commands,
check whether args is empty.
gdb/testsuite/ChangeLog:
* gdb.base/commands.exp: Call new procedure.
(define_if_without_arg_test): New procedure.
|
|
I think it would make more sense if the types and function declarations
related to command lines were in cli-script.h rather than defs.h, since
the related function definitions are in cli-script.c.
I had to add a few includes here and there. I also had to rename the
"lines" parameter of command_lines_deleter::operator(), because ncurses
has a "#define lines ..." that was interfering when cli-script.h is
included by some TUI source files that also include ncurses header files.
gdb/ChangeLog:
* cli/cli-script.h (enum misc_command_type): Move from defs.h.
(enum command_control_type): Likewise.
(struct command_line): Likewise.
(free_command_lines): Likewise.
(struct command_lines_deleter): Likewise.
(command_line_up): Likewise.
(read_command_lines): Likewise.
(read_command_lines_1): Likewise.
* defs.h (enum misc_command_type): Move to cli/cli-script.h.
(enum command_control_type): Likewise.
(struct command_line): Likewise.
(free_command_lines): Likewise.
(struct command_lines_deleter): Likewise.
(command_line_up): Likewise.
(read_command_lines): Likewise.
(read_command_lines_1): Likewise.
* breakpoint.h: Include cli/cli-script.h.
* extension-priv.h: Likewise.
* gdbcmd.h: Likewise.
|
|
If you "make" from scratch in gdbserver/, you'll notice that make
deletes the files it considers as intermediary at the end:
$ make clean && make
...
rm i386-mmx-linux-generated.c x32-avx-avx512-linux-generated.c ...
Then, if you type make again, make will rebuild these files and rebuild
gdbserver. To avoid this, we can add the .SECONDARY special target. If
it has no pre-requisites, all intermediary files will be kept.
gdb/gdbserver/ChangeLog:
* Makefile.in (.SECONDARY): Define target.
|
|
Instead, make symtab_and_line initialize its members itself. Many
symtab_and_line declarations are moved to where the object is
initialized at the same time both for clarity and to avoid double
initialization. A few functions, like e.g., find_frame_sal are
adjusted to return the sal using normal function return instead of an
output parameter likewise to avoid having to default-construct a sal
and then immediately have the object overwritten.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ada-lang.c (is_known_support_routine): Move sal declaration to
where it is initialized.
* breakpoint.c (create_internal_breakpoint, init_catchpoint)
(parse_breakpoint_sals, decode_static_tracepoint_spec)
(clear_command, update_static_tracepoint): Remove init_sal
references. Move declarations closer to initializations.
* cli/cli-cmds.c (list_command): Move sal declarations closer to
initializations.
* elfread.c (elf_gnu_ifunc_resolver_stop): Remove init_sal
references. Move sal declarations closer to initializations.
* frame.c (find_frame_sal): Return a symtab_and_line via function
return instead of output parameter. Remove init_sal references.
* frame.h (find_frame_sal): Return a symtab_and_line via function
return instead of output parameter.
* guile/scm-frame.c (gdbscm_frame_sal): Adjust.
* guile/scm-symtab.c (stscm_make_sal_smob): Use in-place new
instead of memset.
(gdbscm_find_pc_line): Remove init_sal reference.
* infcall.c (call_function_by_hand_dummy): Remove init_sal
references. Move declarations closer to initializations.
* infcmd.c (set_step_frame): Update. Move declarations closer to
initializations.
(finish_backward): Remove init_sal references. Move declarations
closer to initializations.
* infrun.c (process_event_stop_test, handle_step_into_function)
(insert_hp_step_resume_breakpoint_at_frame)
(insert_step_resume_breakpoint_at_caller): Likewise.
* linespec.c (create_sals_line_offset, decode_digits_ordinary)
(symbol_to_sal): Likewise.
* probe.c (parse_probes_in_pspace): Remove init_sal reference.
* python/py-frame.c (frapy_find_sal): Move sal declaration closer
to its initialization.
* reverse.c (save_bookmark_command): Use new/delete. Remove
init_sal references. Move declarations closer to initializations.
* source.c (get_current_source_symtab_and_line): Remove brace
initialization.
(set_current_source_symtab_and_line): Now takes the sal by const
reference. Remove brace initialization.
(line_info): Remove init_sal reference.
* source.h (set_current_source_symtab_and_line): Now takes a
symtab_and_line via const reference.
* stack.c (set_current_sal_from_frame): Adjust.
(print_frame_info): Adjust.
(get_last_displayed_sal): Return the sal via function return
instead of via output parameter. Simplify.
(frame_info): Adjust.
* stack.h (get_last_displayed_sal): Return the sal via function
return instead of via output parameter.
* symtab.c (init_sal): Delete.
(find_pc_sect_line): Remove init_sal references. Move
declarations closer to initializations.
(find_function_start_sal): Remove init_sal references. Move
declarations closer to initializations.
* symtab.h (struct symtab_and_line): In-class initialize all
fields.
* tracepoint.c (set_traceframe_context)
(print_one_static_tracepoint_marker): Remove init_sal references.
Move declarations closer to initializations.
* tui/tui-disasm.c (tui_show_disassem_and_update_source): Adjust.
* tui/tui-stack.c (tui_show_frame_info): Adjust. Move
declarations closer to initializations.
* tui/tui-winsource.c (tui_update_source_window_as_is): Remove
init_sal references. Adjust.
|
|
This replaces "struct symtabs_and_lines" with
std::vector<symtab_and_line> in most cases. This removes a number of
cleanups.
In some cases, the sals objects do not own the sals they point at.
Instead they point at some sal that lives on the stack. Typically
something like this:
struct symtab_and_line sal;
struct symtabs_and_lines sals;
// fill in sal
sals.nelts = 1;
sals.sals = &sal;
// use sals
Instead of switching those cases to std::vector too, such usages are
replaced by gdb::array_view<symtab_and_line> instead. This avoids
introducing heap allocations.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Use range-for.
* break-catch-throw.c (re_set_exception_catchpoint): Update.
* breakpoint.c: Include "common/array-view.h".
(init_breakpoint_sal, create_breakpoint_sal): Change sals
parameter from struct symtabs_and_lines to
array_view<symtab_and_line>. Adjust. Use range-for. Update.
(breakpoint_sals_to_pc): Change sals parameter from struct
symtabs_and_lines to std::vector reference.
(check_fast_tracepoint_sals): Change sals parameter from struct
symtabs_and_lines to std::array_view. Use range-for.
(decode_static_tracepoint_spec): Return a std::vector instead of
symtabs_and_lines. Update.
(create_breakpoint): Update.
(break_range_command, until_break_command, clear_command): Update.
(base_breakpoint_decode_location, bkpt_decode_location)
(bkpt_probe_create_sals_from_location)
(bkpt_probe_decode_location, tracepoint_decode_location)
(tracepoint_probe_decode_location)
(strace_marker_create_sals_from_location): Return a std::vector
instead of symtabs_and_lines.
(strace_marker_create_breakpoints_sal): Update.
(strace_marker_decode_location): Return a std::vector instead of
symtabs_and_lines. Update.
(update_breakpoint_locations): Change struct symtabs_and_lines
parameters to gdb::array_view. Adjust.
(location_to_sals): Return a std::vector instead of
symtabs_and_lines. Update.
(breakpoint_re_set_default): Use std::vector instead of struct
symtabs_and_lines.
(decode_location_default): Return a std::vector instead of
symtabs_and_lines. Update.
* breakpoint.h: Include "common/array-view.h".
(struct breakpoint_ops) <decode_location>: Now returns a
std::vector instead of returning a symtabs_and_lines via output
parameter.
(update_breakpoint_locations): Change sals parameters to use
gdb::array_view.
* cli/cli-cmds.c (edit_command, list_command): Update to use
std::vector and gdb::array_view.
(ambiguous_line_spec): Adjust to use gdb::array_view and
range-for.
(compare_symtabs): Rename to ...
(cmp_symtabs): ... this. Change parameters to symtab_and_line
const reference and adjust.
(filter_sals): Rewrite using std::vector and standard algorithms.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Simplify.
(jump_command): Update to use std::vector.
* linespec.c (struct linespec_state) <canonical_names>: Update
comment.
(add_sal_to_sals_basic): Delete.
(add_sal_to_sals, filter_results, convert_results_to_lsals)
(decode_line_2, create_sals_line_offset)
(convert_address_location_to_sals, convert_linespec_to_sals)
(convert_explicit_location_to_sals, parse_linespec)
(event_location_to_sals, decode_line_full, decode_line_1)
(decode_line_with_current_source)
(decode_line_with_last_displayed, decode_objc)
(decode_digits_list_mode, decode_digits_ordinary, minsym_found)
(linespec_result::~linespec_result): Adjust to use std::vector
instead of symtabs_and_lines.
* linespec.h (linespec_sals::sals): Now a std::vector.
(struct linespec_result): Use std::vector, bool, and in-class
initialization.
(decode_line_1, decode_line_with_current_source)
(decode_line_with_last_displayed): Return std::vector.
* macrocmd.c (info_macros_command): Use std::vector.
* mi/mi-main.c (mi_cmd_trace_find): Use std::vector.
* probe.c (parse_probes_in_pspace, parse_probes): Adjust to use
std::vector.
* probe.h (parse_probes): Return a std::vector.
* python/python.c (gdbpy_decode_line): Use std::vector and
gdb::array_view.
* source.c (select_source_symtab, line_info): Use std::vector.
* stack.c (func_command): Use std::vector.
* symtab.h (struct symtabs_and_lines): Delete.
* tracepoint.c (tfind_line_command, scope_info): Use std::vector.
|
|
An array_view is an abstraction that provides a non-owning view over a
sequence of contiguous objects.
A way to put it is that array_view is to std::vector (and std::array
and built-in arrays with rank==1) like std::string_view is to
std::string.
The main intent of array_view is to use it as function input parameter
type, making it possible to pass in any sequence of contiguous
objects, irrespective of whether the objects live on the stack or heap
and what actual container owns them. Implicit construction from the
element type is supported too, making it easy to call functions that
expect an array of elements when you only have one element (usually on
the stack). For example:
struct A { .... };
void function (gdb::array_view<A> as);
std::vector<A> std_vec = ...;
std::array<A, N> std_array = ...;
A array[] = {...};
A elem;
function (std_vec);
function (std_array);
function (array);
function (elem);
Views can be either mutable or const. A const view is simply created
by specifying a const T as array_view template parameter, in which
case operator[] of non-const array_view objects ends up returning
const references. (Making the array_view itself const is analogous to
making a pointer itself be const. I.e., disables re-seating the
view/pointer.) Normally functions will pass around array_views by
value.
Uses of gdb::array_view (other than the ones in the unit tests) will
be added in a follow up patch.
gdb/ChangeLog
2017-09-04 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/array-view-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add array-view-selftests.o.
* common/array-view.h: New file.
* unittests/array-view-selftests.c: New file.
|
|
Currently, with "list LINESPEC1,LINESPEC2", if one of the linespecs is
ambiguous, i.e., if it expands to multiple locations, you get this
seemingly odd output:
(gdb) list foo,bar
file: "file0.c", line number: 26
file: "file1.c", line number: 29
Since "foo" above expands to multiple locations, the specified range
is indeterminate, and GDB is trying to be helpful by showing you what
was ambiguous. It looks confusing to me, though. I think it'd be
much more user friendly if GDB actually told you that, like this:
(gdb) list foo,bar
Specified first line 'foo' is ambiguous:
file: "file0.c", line number: 26
file: "file1.c", line number: 29
(gdb) list bar,foo
Specified last line 'foo' is ambiguous:
file: "file0.c", line number: 26
file: "file1.c", line number: 29
Note, I'm using "first" and "last" in the output because that's what
the manual uses:
~~~
list first,last
Print lines from first to last. [...]
~~~
Tested on x86-64 GNU/Linux.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (edit_command): Pass message to
ambiguous_line_spec.
(list_command): Pass message to ambiguous_line_spec. Say
"first"/"last" instead of "start" and "end" to be consistent with
the manual.
(ambiguous_line_spec): Add 'format' and vararg parameters. Use
them to print formatted message.
gdb/testsuite/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* gdb.base/list-ambiguous.exp: New file.
* gdb.base/list-ambiguous0.c: New file.
* gdb.base/list-ambiguous1.c: New file.
* gdb.base/list.exp (test_list_range): Adjust expected output.
|
|
Fix build regression introduced by 0860c437cbe4 ("btrace: Store
btrace_insn in an std::vector"):
src/gdb/btrace.c: In function ‘void ftrace_add_pt(btrace_thread_info*, pt_insn_decoder*, int*, std::vector<unsigned int>&)’:
src/gdb/btrace.c:1329:38: error: invalid initialization of reference of type ‘const btrace_insn&’ from expression of type ‘btrace_insn*’
ftrace_update_insns (bfun, &btinsn);
^
src/gdb/btrace.c:648:1: note: in passing argument 2 of ‘void ftrace_update_insns(btrace_function*, const btrace_insn&)’
ftrace_update_insns (struct btrace_function *bfun, const btrace_insn &insn)
^
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* btrace.c (ftrace_add_pt): Pass btrace_insn to
ftrace_update_insns by reference instead of pointer.
|
|
This patch remove the usage of tdesc_i386_mmx in i386-go32-tdep.c, and use
i386_target_description to get it instead.
gdb:
2017-09-04 Yao Qi <yao.qi@linaro.org>
* i386-go32-tdep.c: Include x86-xstate.h.
(i386_go32_init_abi): Call i386_target_description.
* i386-tdep.c (i386_target_description): Return tdesc_i386_mmx
if xcr0 is X86_XSTATE_X87_MASK.
* i386-tdep.h (tdesc_i386): Remove the declaration.
(tdesc_i386_mmx): Likewise.
|
|
i386fbsd_core_read_xcr0 reads the value of xcr0 from the corefile. If
it fails, returns 0. This makes its caller {i386,amd64}_target_description
has to handle this special value. IMO, i386fbsd_core_read_xcr0 should
return the default xcr0 in case of error.
gdb:
2017-09-04 Yao Qi <yao.qi@linaro.org>
* i386-fbsd-tdep.c (i386fbsd_core_read_xcr0): Return
X86_XSTATE_SSE_MASK instead of 0.
|
|
GDB can call function i386_target_description to get the right target
description rather than tdesc_i386
gdb:
2017-09-04 Yao Qi <yao.qi@linaro.org>
* amd64-fbsd-nat.c (amd64fbsd_read_description): Call
i386_target_description.
* i386-fbsd-nat.c (i386fbsd_read_description): Call
i386_target_description.
* i386-tdep.c (i386_gdbarch_init): Likewise.
|
|
This patch changes amd64-*-tdep.c files to use function
amd64_target_description to get the right target description rather than
use the variable tdesd_amd64.
gdb:
2017-09-04 Yao Qi <yao.qi@linaro.org>
* amd64-darwin-tdep.c: Include "x86-xstate.h".
(x86_darwin_init_abi_64): Call amd64_target_description.
* amd64-dicos-tdep.c: Likewise.
* amd64-fbsd-nat.c: Likewise.
* amd64-fbsd-tdep.c: Likewise.
* amd64-nbsd-tdep.c: Likewise.
* amd64-obsd-tdep.c: Likewise.
* amd64-sol2-tdep.c: Likewise.
* amd64-windows-tdep.c: Likewise.
* amd64-tdep.h (tdesc_amd64): Remove the declaration.
|
|
Because it contains a non-POD type field (flags), the type btrace_insn
should be new'ed/delete'd. Replace the VEC (btrace_insn_s) in
btrace_function with an std::vector.
gdb/ChangeLog:
* btrace.h (btrace_insn_s, DEF_VEC_O (btrace_insn_s)): Remove.
(btrace_function) <insn>: Change type to use std::vector.
* btrace.c (ftrace_debug, ftrace_call_num_insn,
ftrace_find_call, ftrace_new_gap, ftrace_update_function,
ftrace_update_insns, ftrace_compute_global_level_offset,
btrace_stitch_bts, btrace_clear, btrace_insn_get,
btrace_insn_end, btrace_insn_next, btrace_insn_prev): Adjust to
change to std::vector.
(ftrace_update_insns): Adjust to change to std::vector, change
type of INSN parameter.
(btrace_compute_ftrace_bts): Adjust call to ftrace_update_insns.
* record-btrace.c (btrace_call_history_insn_range,
btrace_compute_src_line_range,
record_btrace_frame_prev_register): Adjust to change to
std::vector.
* python/py-record-btrace.c (recpy_bt_func_instructions): Adjust
to change to std::vector.
|
|
This changes reopen_exec_file to use a std::string, removing a
cleanup.
ChangeLog
2017-09-03 Tom Tromey <tom@tromey.com>
* corefile.c (reopen_exec_file): Use std::string.
|
|
Change various things in the compile/ code to use std::string or
unique_xmalloc_ptr as appropriate. This allows the removal of some
cleanups.
ChangeLog
2017-09-03 Tom Tromey <tom@tromey.com>
* compile/compile.c (compile_register_name_mangled): Return
std::string.
* compile/compile-loc2c.c (pushf_register_address): Update.
(pushf_register): Update.
* compile/compile-c-types.c (convert_array): Update.
* compile/compile-c-symbols.c (generate_vla_size): Update.
(error_symbol_once): Use a gdb::unique_xmalloc_ptr.
(symbol_substitution_name): Return a gdb::unique_xmalloc_ptr.
(convert_one_symbol): Update.
(generate_c_for_for_one_variable): Update.
* compile/compile-c-support.c (c_get_range_decl_name): Return a
std::string.
(generate_register_struct): Update.
* compile/compile-internal.h (c_get_range_decl_name): Return a
std::string.
(compile_register_name_mangled): Return std::string.
|
|
Change perror_string to return a std::string, removing a cleanup in
the process.
ChangeLog
2017-09-03 Tom Tromey <tom@tromey.com>
* utils.c (perror_string): Return a std::string.
(throw_perror_with_name, perror_warning_with_name): Update.
|
|
Change demangle_command to use std::string and unique_xmalloc_ptr,
removing some cleanups.
ChangeLog
2017-09-03 Tom Tromey <tom@tromey.com>
* demangle.c (demangle_command): Use std::string,
unique_xmalloc_ptr.
|
|
Change do_set_command to use std::string, removing a cleanup and some
manual resizing code.
ChangeLog
2017-09-03 Tom Tromey <tom@tromey.com>
* cli/cli-setshow.c (do_set_command): Use std::string.
|
|
Change cd_command to use unique_xmalloc_ptr, removing a cleanup.
ChangeLog
2017-09-03 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (cd_command): Use gdb::unique_xmalloc_ptr.
|
|
Change mi_cmd_interpreter_exec to use std::string, removing a cleanup.
ChangeLog
2017-09-03 Tom Tromey <tom@tromey.com>
* mi/mi-interp.c (mi_cmd_interpreter_exec): Use std::string.
|
|
Change env_execute_cli_command to use unique_xmalloc_ptr, removing a
cleanup.
ChangeLog
2017-09-03 Tom Tromey <tom@tromey.com>
* mi/mi-cmd-env.c (env_execute_cli_command): Use
gdb::unique_xmalloc_ptr.
|
|
This changes a few spots in thread.c to use std::string, removing some
cleanups.
ChangeLog
2017-09-03 Tom Tromey <tom@tromey.com>
* thread.c (print_thread_info_1): Use string_printf.
(thread_apply_command, thread_apply_all_command): Use
std::string.
|
|
This changes memory_error_message to return a std::string and fixes up
the callers. This removes some cleanups.
ChangeLog
2017-09-03 Tom Tromey <tom@tromey.com>
* valprint.c (val_print_string): Update.
* gdbcore.h (memory_error_message): Return std::string.
* corefile.c (memory_error_message): Return std::string.
(memory_error): Update.
* breakpoint.c (insert_bp_location): Update.
|
|
A quite straightforward change. It does "fix" leaks in record-btrace.c,
although since this is only used in debug printing code, it has no real
world impact.
gdb/ChangeLog:
* target/waitstatus.h (target_waitstatus_to_string): Change
return type to std::string.
* target/waitstatus.c (target_waitstatus_to_string): Return
std::string.
* target.h (target_waitstatus_to_string): Remove declaration.
* infrun.c (resume, clear_proceed_status_thread,
print_target_wait_results, do_target_wait, save_waitstatus,
stop_all_threads): Adjust.
* record-btrace.c (record_btrace_wait): Adjust.
* target-debug.h
(target_debug_print_struct_target_waitstatus_p): Adjust.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_wait_1): Adjust.
* server.c (queue_stop_reply_callback): Adjust.
|
|
On <=RHEL6 hosts Fedora/RHEL GDB started to 'kill -STOP' all processes it
detached. Even those not originally T-stopped. This is a Fedora-specific
patch which is based on upstream GDB's PROC_STATE_STOPPED state.
I believe (I did not verify) this patch did regress it:
commit d617208bb06bd461b52ce041d89f7127e3044762
Author: Pedro Alves <palves@redhat.com>
Date: Mon Jul 25 12:42:17 2016 +0100
linux-procfs: Introduce enum proc_state
As originally there was strstr() but now there is strcmp() and so the missing
trailing '\n' no longer matches.
The Bug was found by Michal Kolar.
Reproducibility:
$ gdb -p $PID
(gdb) quit
$ ...
Actual results:
===
RHEL6.9 x86_64 # scl enable devtoolset-7 bash
RHEL6.9 x86_64 # which gdb
/opt/rh/devtoolset-7/root/usr/bin/gdb
RHEL6.9 x86_64 # ./testcase.sh
24737 pts/0 S+ 0:00 /bin/sleep 4
24737 pts/0 T+ 0:00 /bin/sleep 4
RHEL6.9 x86_64 #
===
Expected results:
===
RHEL6.9 x86_64 # which gdb
/usr/bin/gdb
RHEL6.9 x86_64 # ./testcase.sh
24708 pts/0 S+ 0:00 /bin/sleep 4
24708 pts/0 S+ 0:00 /bin/sleep 4
./testcase.sh: line 20: kill: (24708) - No such process
RHEL6.9 x86_64 #
===
gdb/ChangeLog
2017-09-01 Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/22046
* nat/linux-procfs.c (parse_proc_status_state): Fix PROC_STATE_STOPPED
detection.
|
|
starting the inferior
This patch implements the ability to set/unset environment variables
on the remote target, mimicking what GDB already offers to the user.
There are two features present here: user-set and user-unset
environment variables.
User-set environment variables are only the variables that are
explicitly set by the user, using the 'set environment' command. This
means that variables that were already present in the environment when
starting GDB/GDBserver are not transmitted/considered by this feature.
User-unset environment variables are variables that are explicitly
unset by the user, using the 'unset environment' command.
The idea behind this patch is to store user-set and user-unset
environment variables in two separate sets, both part of gdb_environ.
Then, when extended_remote_create_inferior is preparing to start the
inferior, it will iterate over the two sets and set/unset variables
accordingly. Three new packets are introduced:
- QEnvironmentHexEncoded, which is used to set environment variables,
and contains an hex-encoded string in the format "VAR=VALUE" (VALUE
can be empty if the user set a variable with a null value, by doing
'set environment VAR=').
- QEnvironmentUnset, which is used to unset environment variables, and
contains an hex-encoded string in the format "VAR".
- QEnvironmentReset, which is always the first packet to be
transmitted, and is used to reset the environment, i.e., discard any
changes made by the user on previous runs.
The QEnvironmentHexEncoded packet is inspired on LLDB's extensions to
the RSP. Details about it can be seen here:
<https://raw.githubusercontent.com/llvm-mirror/lldb/master/docs/lldb-gdb-remote.txt>
I decided not to implement the QEnvironment packet because it is
considered deprecated by LLDB. This packet, on LLDB, serves the same
purpose of QEnvironmentHexEncoded, but sends the information using a
plain text, non-hex-encoded string.
The other two packets are new.
This patch also includes updates to the documentation, testsuite, and
unit tests, without introducing regressions.
gdb/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Add entry mentioning new support
for setting/unsetting environment variables on the remote target.
(New remote packets): Add entries for QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
* common/environ.c (gdb_environ::operator=): Extend method to
handle m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::clear): Likewise.
(match_var_in_string): Change type of first parameter from 'char
*' to 'const char *'.
(gdb_environ::set): Extend method to handle
m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::unset): Likewise.
(gdb_environ::clear_user_set_env): New method.
(gdb_environ::user_set_envp): Likewise.
(gdb_environ::user_unset_envp): Likewise.
* common/environ.h (gdb_environ): Handle m_user_set_env_list and
m_user_unset_env_list on move constructor/assignment.
(unset): Add new default parameter 'update_unset_list = true'.
(clear_user_set_env): New method.
(user_set_envp): Likewise.
(user_unset_envp): Likewise.
(m_user_set_env_list): New std::set.
(m_user_unset_env_list): Likewise.
* common/rsp-low.c (hex2str): New function.
(bin2hex): New overload for bin2hex function.
* common/rsp-low.c (hex2str): New prototype.
(str2hex): New overload prototype.
* remote.c: Include "environ.h". Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
(remote_protocol_features): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(send_environment_packet): New function.
(extended_remote_environment_support): Likewise.
(extended_remote_create_inferior): Call
extended_remote_environment_support.
(_initialize_remote): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packet configs.
* unittests/environ-selftests.c (gdb_selftest_env_var):
New variable.
(test_vector_initialization): New function.
(test_init_from_host_environ): Likewise.
(test_reinit_from_host_environ): Likewise.
(test_set_A_unset_B_unset_A_cannot_find_A_can_find_B):
Likewise.
(test_unset_set_empty_vector): Likewise.
(test_vector_clear): Likewise.
(test_std_move): Likewise.
(test_move_constructor):
(test_self_move): Likewise.
(test_set_unset_reset): Likewise.
(run_tests): Rewrite in terms of the functions above.
gdb/gdbserver/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (handle_general_set): Handle QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(handle_query): Inform remote that QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset are supported.
gdb/doc/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (set environment): Add @anchor. Explain that
environment variables set by the user are sent to GDBserver.
(unset environment): Likewise, but for unsetting variables.
(Connecting) <Remote Packet>: Add "environment-hex-encoded",
"QEnvironmentHexEncoded", "environment-unset", "QEnvironmentUnset",
"environment-reset" and "QEnvironmentReset" to the table.
(Remote Protocol) <QEnvironmentHexEncoded, QEnvironmentUnset,
QEnvironmentReset>: New item, explaining the packet.
gdb/testsuite/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/share-env-with-gdbserver.c: New file.
* gdb.base/share-env-with-gdbserver.exp: Likewise.
|
|
The problem of failing to build with arm-linux-gnueabihf-g++-4.8 was
that type CORE_ADDR is of "unsigned long" on a 64-bit machine so it's
OK to use %lx but is of type "unsigned long long" on a 32 bit system.
Fixed the problem in three places - (1) use a temp variable of type
CORE_ADDR as argument 3 when calling target_auxv_search() then assign
its value to "blksize" and "nbits" in 2 calls; (2) redo
adi_normalize_address() using masks and xor operators to calculate
normalized address; (3) call paddress() to print CORE_ADDR in either
printf_filtered() or error(). Thank you, Pedro, for all your
suggestions.
gdb/ChangeLog:
2017-08-31 Weimin Pan <weimin.pan@oracle.com>
* sparc64-tdep.c (adi_stat_t): Fix comment formatting.
(adi_available): Use a temp variable of type CORE_ADDR as argument
3 when calling target_auxv_search.
(adi_normalize_address): Use masks and xor operators to calculate
normalized address.
(adi_read_versions, adi_write_versions, adi_print_versions)
(do_examine, do_assign): Use paddress.
|
|
FreeBSD/mips kernels were recently changed to include the floating
point implementation revision register in the floating point register
set exported in process cores and via ptrace() (r318067). This change
will first ship in FreeBSD 12.0 when it is eventually released. The
space used to hold FIR was previously reserved in 'struct fpreg' as a
zero-filled dummy for padding, so 'struct fpreg' has not changed in
size. Since FIR should be non-zero on all MIPS processors supported
by FreeBSD, ignore a value of 0 from 'struct fpreg' and only report
non-zero values as a valid FIR register.
gdb/ChangeLog:
* mips-fbsd-nat.c (getfpregs_supplies): Return true for FIR.
* mips-fbsd-tdep.c (mips_fbsd_supply_fpregs): Split supply of FSR
out of loop and add supply of FIR.
(mips_fbsd_collect_fpregs): Split collect of FSR out of loop and
add collect of FIR.
|
|
There are a few unused references to the gdb_prompt global.
gdb/testsuite/ChangeLog:
* gdb.base/commands.exp (gdbvar_simple_if_test,
gdbvar_simple_if_test, gdbvar_complex_if_while_test,
progvar_simple_if_test, progvar_simple_while_test,
progvar_complex_if_while_test, user_defined_command_test,
user_defined_command_args_eval,
user_defined_command_args_stack_test,
user_defined_command_manyargs_test, bp_deleted_in_command_test,
temporary_breakpoint_commands,
gdb_test_no_prompt, redefine_hook_test,
redefine_backtrace_test): Remove "global gdb_prompt".
|
|
This should have been included in the previous commit.
|
|
Commit
Command names: make them case sensitive
3d7b173c29900879c9a5958dd6029fd36666e57c
made command name lookup case sensitive. However, define_command, used
when creating a user-defined command, converts the command name to
lowercase, assuming that the command name lookup works in a case
insensitive way. This causes user-defined commands with capital letters
in their name to only be callable with a lowercase version:
(gdb) define Foo
Type commands for definition of "Foo".
End with a line saying just "end".
>print 1
>end
(gdb) Foo
Undefined command: "Foo". Try "help".
(gdb) foo
$1 = 1
This patch removes that conversion to lowercase, so that the user can
call the command with the same name they provided.
gdb/ChangeLog:
* cli/cli-script.c (define_command): Don't convert command name
to lower case.
gdb/testsuite/ChangeLog:
* gdb.base/commands.exp (user_defined_command_case_sensitivity):
New proc, call it from toplevel.
|
|
The function is always called with DISPP set to NULL, so there is
no need for this parameter anymore. This patch removes it, and
eliminates some dead code associated to that.
gdb/ChangeLog:
* ada-lang.c (ada_lookup_struct_elt_type): Remove parameter "dispp".
Update all callers accordingly. Remove all code blocks handling
the case where DISPP is not NULL.
Tested on x86_64-linux, no regression.
|
|
These functions apply to thread, and not inferiors (in the gdbserver
sense, the abstraction for threads and processes, as in
inferior_list). Therefore, it would make more sense if these functions
were named with "thread" rather than "inferior".
gdb/gdbserver/ChangeLog:
* inferiors.h (inferior_target_data): Rename to ...
(thread_target_data): ... this.
(inferior_regcache_data): Rename to ...
(thread_regcache_data): ... this.
(set_inferior_regcache_data): Rename to ...
(set_thread_regcache_data): ... this.
* inferiors.c (inferior_target_data): Rename to ...
(thread_target_data): ... this.
(inferior_regcache_data): Rename to ...
(thread_regcache_data): ... this.
(set_inferior_regcache_data): Rename to ...
(set_thread_regcache_data): ... this.
(free_one_thread): Update.
* linux-low.h (get_thread_lwp): Update.
* regcache.c (get_thread_regcache): Update.
(regcache_invalidate_thread): Update.
(free_register_cache_thread): Update.
* win32-i386-low.c (update_debug_registers_callback): Update.
(win32_get_current_dr): Update.
* win32-low.c (thread_rec): Update.
(delete_thread_info): Update.
(continue_one_thread): Update.
(suspend_one_thread): Update.
|
|
The inferior (thread) target data is always set through add_thread.
gdb/gdbserver/ChangeLog:
* inferiors.c (set_inferior_target_data): Remove.
* inferiors.h (set_inferior_target_data): Remove.
|
|
-gdwarf-4:
ptype logical
type = const char [2]
(gdb) PASS: gdb.base/constvars.exp: ptype logical
-gdwarf-5:
ptype logical
type = const char []
(gdb) FAIL: gdb.base/constvars.exp: ptype logical
<2><2fc>: Abbrev Number: 1 (DW_TAG_variable)
<2fd> DW_AT_name : (indirect string, offset: 0x2eb): logical
<301> DW_AT_decl_file : 1
1 DW_TAG_variable [no children]
DW_AT_name DW_FORM_strp
DW_AT_decl_file DW_FORM_implicit_const: 1
During symbol reading, invalid attribute class or form for
'DW_FORM_implicit_const' in '(null)'.
gdb/ChangeLog
2017-08-24 Jan Kratochvil <jan.kratochvil@redhat.com>
PR symtab/22003
* dwarf2read.c (dwarf2_const_value_attr, dump_die_shallow)
(dwarf2_get_attr_constant_value, dwarf2_fetch_constant_bytes)
(skip_form_bytes, attr_form_is_constant): Handle DW_FORM_implicit_const.
|
|
GDB was now accessing as signatured_type memory allocated only by size of
dwarf2_per_cu_data.
gdb/ChangeLog
2017-08-24 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (build_type_psymtabs_reader): New prototype.
(process_psymtab_comp_unit): Accept IS_DEBUG_TYPES.
(read_comp_units_from_section): New parameter abbrev_section, use
read_and_check_comp_unit_head, allocate signatured_type if needed.
(create_all_comp_units): Update read_comp_units_from_section caller.
|
|
There is an assertion that is triggering when we start GDB and
instruct it to debug a remote inferior, but don't provide a local
binary, like:
./gdb -nx -q --data-directory=data-directory -ex "tar ext :1234" \
-ex "set remote exec-file /bin/ls" -ex r
In this case, when calling exec_file_locate_attach to locate the
inferior, GDB is incorrectly resetting the breakpoints without a
thread/inferior even running, which causes an assertion to be
triggered:
binutils-gdb/gdb/thread.c:1609: internal-error: scoped_restore_current_thread::scoped_restore_current_thread(): Assertion `tp != NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This happens because add_current_inferior_and_thread (on remote.c) is
breaking an invariant: making inferior_ptid point to a non-existing
thread and then calling common code, which in this case is
breakpoint_re_set. The fix is to make sure that inferior_ptid points
to null_ptid if there is no thread present.
A testcase is provided. Regtested on buildbot.
gdb/ChangeLog:
2017-08-23 Pedro Alves <palves@redhat.com>
PR remote/21852
* remote.c (add_current_inferior_and_thread): Set inferior_ptid
to null_ptid and switch to thread without reading the registers
after adding the inferior.
gdb/testsuite/ChangeLog:
2017-08-23 Sergio Durigan Junior <sergiodj@redhat.com>
PR remote/21852
* gdb.server/normal.c: New file, copied from gdb.base.
* gdb.server/run-without-local-binary.exp: New file.
|
|
As discussed in
How to use compile & execute function in GDB
https://sourceware.org/ml/gdb/2015-04/msg00026.html
GDB currently searches for compilers on /usr/bin/ARCH-OS-gcc and
chooses a match from there. However, it is not currently possible for
the user to override which compiler to use. This is what this patch
implements.
It is also a sync between GCC's and GDB's interfaces.
gdb/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* NEWS (Changes since GDB 7.9): Add set compile-gcc and show
compile-gcc.
* compile/compile.c (compile_gcc, show_compile_gcc): New.
(compile_to_object): Implement compile_gcc.
(_initialize_compile): Install "set compile-gcc". Initialize
compile_gcc.
gdb/doc/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Compiling and Injecting Code): Add to subsection
"Compiler search for the compile command" descriptions of set
compile-gcc and show compile-gcc.
include/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gcc-interface.h (enum gcc_base_api_version): Update comment for
GCC_FE_VERSION_1.
(struct gcc_base_vtable): Rename set_arguments to set_arguments_v0.
Add set_arguments, set_triplet_regexp and set_driver_filename.
|
|
As discussed in
How to use compile & execute function in GDB
https://sourceware.org/ml/gdb/2015-04/msg00026.html
GDB currently searches for compilers on /usr/bin/ARCH-OS-gcc and
chooses a match from there. However, it is not currently possible for
the user to display which compiler was selected. Up until now, GDB's
compiler interface was not up-to-date with GCC's one, which means that
it wasn't possible to obtain this information. This patch implements
the mechanisms necessary for that.
gdb/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* compile/compile.c (compile_to_object): Conditionally call
set_verbose. Conditionally call compile or compile_v0.
include/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gcc-interface.h (enum gcc_base_api_version): Add
GCC_FE_VERSION_1.
(struct gcc_base_vtable): Rename compile to compile_v0. Update
comment for compile. New methods set_verbose and compile.
|
|
The M7 processor supports an Application Data Integrity (ADI) feature
that detects invalid data accesses. When software allocates data, it
chooses a 4-bit version number, sets the version in the upper 4 bits
of the 64-bit pointer to that data, and stores the 4-bit version in
every cacheline of the object. Hardware saves the latter in spare
bits in the cache and memory hierarchy. On each load and store, the
processor compares the upper 4 VA (virtual address) bits to the
cacheline's version. If there is a mismatch, the processor generates a
version mismatch trap which can be either precise or disrupting. The
trap is an error condition which the kernel delivers to the process as
a SIGSEGV signal.
The upper 4 bits of the VA represent a version and are not part of the
true address. The processor clears these bits and sign extends bit 59
to generate the true address.
Note that 32-bit applications cannot use ADI.
This patch adds ADI support in gdb which allows the user to examine
current version tags and assign new version tags in the program. It
also catches and reports precise or disrupting memory corruption
traps.
gdb/ChangeLog:
2017-08-07 Weimin Pan <weimin.pan@oracle.com>
* sparc64-tdep.h: (adi_normalize_address): New export.
* sparc-nat.h: (open_adi_tag_fd): New export.
* sparc64-linux-nat.c: (open_adi_tag_fd): New function.
* sparc64-linux-tdep.c:
(SEGV_ACCADI, SEGV_ADIDERR, SEGV_ADIPERR) New defines.
(sparc64_linux_handle_segmentation_fault): New function.
(sparc64_linux_init_abi): Register
sparc64_linux_handle_segmentation_fault
* sparc64-tdep.c: Include cli-utils.h,gdbcmd.h,auxv.h.
(sparc64_addr_bits_remove): New function.
(sparc64_init_abi): Register sparc64_addr_bits_remove.
(MAX_PROC_NAME_SIZE): New macro.
(AT_ADI_BLKSZ, AT_ADI_NBITS, AT_ADI_UEONADI) New defines.
(sparc64adilist): New variable.
(adi_proc_list): New variable.
(find_adi_info): New function.
(add_adi_info): New function.
(get_adi_info_proc): New function.
(get_adi_info): New function.
(info_adi_command): New function.
(read_maps_entry): New function.
(adi_available): New function.
(adi_normalize_address): New function.
(adi_align_address): New function.
(adi_convert_byte_count): New function.
(adi_tag_fd): New function.
(adi_is_addr_mapped): New function.
(adi_read_versions): New function.
(adi_write_versions): New function.
(adi_print_versions): New function.
(do_examine): New function.
(do_assign): New function.
(adi_examine_command): New function.
(adi_assign_command): New function.
(_initialize_sparc64_adi_tdep): New function.
gdb/doc/ChangeLog:
2017-08-07 Weimin Pan <weimin.pan@oracle.com>
* gdb.texinfo (Architectures): Add new Sparc64 section to document
ADI support.
* NEWS: Add "adi examine" and "adi assign" commands.
gdb/testsuite/ChangeLog:
2017-08-07 Weimin Pan <weimin.pan@oracle.com>
* gdb.arch/sparc64-adi.exp: New file.
* gdb.arch/sparc64-adi.c: New file.
|
|
This patch renames a few functions implementing CLI commands to follow
the style <command-name>_command, so that they are easier to search for.
gdb/ChangeLog:
* breakpoint.c (breakpoints_info): Rename to ...
(info_breakpoints_command): ... this.
(watchpoints_info): Rename to ...
(info_watchpoints_command): ... this.
(tracepoints_info): Rename to ...
(info_tracepoints_command): ... this.
(_initialize_breakpoint): Adjust.
* dcache.c (dcache_info): Rename to ...
(info_display_command): ... this.
(_initialize_dcache): Adjust.
* frame.h (args_info): Rename to ...
(info_args_command): ... this.
(locals_info): Rename to ...
(info_locals_command): ... this.
* infcmd.c (nofp_registers_info): Rename to ...
(info_registers_command): ... this.
(float_info): Rename to ...
(info_float_command): ... this.
(program_info): Rename to ...
(info_program_command): ... this.
(all_registers_info): Rename to ...
(info_all_registers_command): ... this.
(vector_info): Rename to ...
(info_vector_command): ... this.
(float_info): Rename to ...
(info_float_command): ... this.
(_initialize_infcmd): Adjust.
* inferior.h (term_info): Rename to ...
(info_terminal_command): ... this.
* inflow.c (term_info): Rename to ...
(info_terminal_command): ... this.
(_initialize_inflow): Adjust.
* infrun.c (signals_info): Rename to ...
(info_signals_command): ... this.
(_initialize_infrun): Adjust.
* objc-lang.c (classes_info): Rename to ...
(info_classes_command): ... this.
(selectors_info): Rename to ...
(info_selectors_command): ... this.
(_initialize_objc_language): Adjust.
* printcmd.c (sym_info): Rename to ...
(info_symbol_command): ... this.
(address_info): Rename to ...
(info_address_command): ... this.
(display_info): Rename to ...
(info_display_command): ... this.
(_initialize_printcmd): Adjust.
* reverse.c (bookmarks_info): Rename to ...
(info_breakpoints_command): ... this.
(_initialize_reverse): Adjust.
* ser-go32.c (dos_info): Rename to ...
(info_serial_command): ... this.
(_initialize_ser_dos): Adjust.
* skip.c (skip_info): Rename to ...
(info_skip_command): ... this.
(_initialize_step_skip): Adjust.
* source.c (line_info): Rename to ...
(info_line_command): ... this.
(source_info): Rename to ...
(info_source_command)
* stack.c (frame_info): Rename to ...
(info_frame_command): ... this.
(locals_info): Rename to ...
(info_locals_command): ... this.
(args_info): Rename to ...
(info_args_command): ... this.
(_initialize_stack): Adjust.
* symtab.c (sources_info): Rename to ...
(info_sources_command): ... this.
(variables_info): Rename to ...
(info_variables_command): ... this.
(functions_info): Rename to ...
(info_functions_command): ... this.
(types_info): Rename to ...
(info_types_command): ... this.
(_initialize_symtab): Adjust.
* target.c (target_info): Rename to ...
(info_target_command): ... this.
(initialize_targets): Adjust.
* tracepoint.c (tvariables_info): Rename to ...
(info_tvariables_command): ... this.
(scope_info): Rename to ...
(info_scope_command): ... this.
(trace_dump_actions): Adjust.
(_initialize_tracepoint): Adjust.
|
|
This adds a test for the "list" command change done in 0d999a6ef0f9
("List actual code around more than one location").
gdb/ChangeLog:
2017-08-22 Pedro Alves <palves@redhat.com>
* gdb.cp/overload.exp (line_range_pattern): New procedure.
(top level): Add "list all overloads" tests.
|
|
This changes install_breakpoint to take a std::unique_ptr rvalue-ref
argument. This makes it clear that install_breakpoint takes ownership
of the pointer, and prevents bugs like the one fixed by the previous
patch.
ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* breakpoint.h (install_breakpoint): Update.
* breakpoint.c (add_solib_catchpoint): Update.
(install_breakpoint): Change argument to a std::unique_ptr.
(create_fork_vfork_event_catchpoint): Use std::unique_ptr.
(create_breakpoint_sal, create_breakpoint): Update.
(watch_command_1, catch_exec_command_1)
(strace_marker_create_breakpoints_sal): Use std::unique_ptr.
(add_to_breakpoint_chain): Change argument to a std::unique_ptr.
Return the breakpoint.
(set_raw_breakpoint_without_location, set_raw_breakpoint)
(new_single_step_breakpoint): Update.
* break-catch-throw.c (handle_gnu_v3_exceptions): Use
std::unique_ptr.
* break-catch-syscall.c (create_syscall_event_catchpoint): Use
std::unique_ptr.
* break-catch-sig.c (create_signal_catchpoint): Use
std::unique_ptr.
* ada-lang.c (create_ada_exception_catchpoint): Use
std::unique_ptr.
|
|
I happened to notice that add_solib_catchpoint allocated the new
catchpoint with "new" but installed a cleanup using "xfree". This
patch fixes the bug by changing the function to use std::unique_ptr
instead.
ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* breakpoint.c (add_solib_catchpoint): Use std::unique_ptr.
|
|
This changes psymtab_search_name to return a unique_xmalloc_ptr and
fixes up its one caller. This allows the removal of some cleanups.
ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* psymtab.c (psymtab_search_name): Return a unique_xmalloc_ptr.
(lookup_partial_symbol): Update.
|
|
This changes rewrite_source_path to return a unique_xmalloc_ptr and
fixes up the callers. This allows removing some cleanups.
ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* source.h (rewrite_source_path): Return a unique_xmalloc_ptr.
* source.c (rewrite_source_path): Return a unique_xmalloc_ptr.
(find_and_open_source, symtab_to_fullname): Update.
* psymtab.c (psymtab_to_fullname): Update.
|
|
This changes gdb_realpath to return a unique_xmalloc_ptr and fixes up
the callers. This allows removing some cleanups. This change by
itself caused xfullpath.exp to fail; and attempting to fix that ran
into various problems (like .get() being optimized out); so this patch
also rewrites xfullpath.exp to be a C++ selftest instead.
ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* exec.c (exec_file_attach): Update.
* linux-thread-db.c (try_thread_db_load): Update.
* guile/scm-safe-call.c (gdbscm_safe_source_script): Update.
* utils.c (gdb_realpath): Change return type.
(gdb_realpath_keepfile): Update.
(gdb_realpath_check_trailer, gdb_realpath_tests): New functions.
(_initialize_utils): Register the new self test.
* source.c (openp): Update.
(find_and_open_source): Update.
* nto-tdep.c (nto_find_and_open_solib): Update.
* main.c (set_gdb_data_directory): Update.
(captured_main_1): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update
(dw2_map_symbol_filenames): Update.
* auto-load.c (auto_load_safe_path_vec_update): Update.
(filename_is_in_auto_load_safe_path_vec): Change type of
"filename_realp".
(auto_load_objfile_script): Update.
(file_is_auto_load_safe): Update. Use std::string.
* utils.h (gdb_realpath): Return a gdb::unique_xmalloc_ptr.
testsuite/ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* gdb.gdb/xfullpath.exp: Remove.
|
