aboutsummaryrefslogtreecommitdiff
path: root/gdb
AgeCommit message (Collapse)AuthorFilesLines
2015-10-07[aarch64] use aarch64_decode_insn to decode instructions in GDBYao Qi2-11/+28
In this patch, we start to use aarch64_decode_insn to decode instructions in aarch64_software_single_step. gdb: 2015-10-07 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c: Include opcode/aarch64.h. (submask): Move it above. (bit): Likewise. (bits): Likewise. (aarch64_software_single_step): Call aarch64_decode_insn. Decode instruction by aarch64_inst instead of using aarch64_decode_bcond and decode_masked_match.
2015-10-06parse load_offset (bias) of restore command as longPitchumani Sivanupandi2-2/+8
Following failures are noticed for avr-gdb. This may be the case for targets like AVR which has integer_to_address hook defined. FAIL: gdb.base/dump.exp: struct copy, srec; value restored ok FAIL: gdb.base/dump.exp: struct copy, ihex; value restored ok FAIL: gdb.base/dump.exp: struct copy, tekhex; value restored ok These tests are failed because load_offset(bias) of restore command parsed as address. command: restore filename [binary] bias start end Except binary, other BFDs have a built-in location; gdb restores content at offset 'bias' from that location. So, 'bias' of 'restore' command should be parsed as address only when the file is binary. Below patch changes gdb to parse 'bias' as long if the file is not binary. gdb/ChangeLog 2015-10-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com> * cli/cli-dump.c (restore_command): Parse load_offset (bias) as address only when the file is binary.
2015-10-02[FT32] gdb: Correctly interpret function prologsjamesbowman2-6/+54
The stack unwinder did not understand the function prologs generated by gcc with -Os. Add code to recognize and interpret the prolog calls. [gdb] 2015-10-02 James Bowman <james.bowman@ftdichip.com> * ft32-tdep.c (ft32_analyze_prologue): Add function prolog subroutine handling.
2015-10-02Fix gdb.dwarf2/staticvirtual.exp regexp.Sandra Loosemore2-1/+11
2015-10-02 Sandra Loosemore <sandra@codesourcery.com> gdb/testsuite/ * gdb.dwarf2/staticvirtual.exp: Generalize regexp so it can match whether or not address 0x1000 is mapped on the target.
2015-10-01vec.h: Add casts for C++ compatSimon Marchi2-3/+7
gdb/ChangeLog: * common/vec.h (VEC_OP (T,cleanup)): Add pointer cast.
2015-09-30dwarf2read.c (setup_type_unit_groups): Add comment.Doug Evans2-0/+9
gdb/ChangeLog: * dwarf2read.c (setup_type_unit_groups): Add comment.
2015-09-30x86/Linux: reenable all-stop on top of non-stopPedro Alves3-13/+7
Since the record-btrace target now supports non-stop mode, we no longer need to force-disable as-ns on x86. gdb/ChangeLog: 2015-09-30 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_nat_always_non_stop_p): Always return 1. * x86-linux-nat.c (x86_linux_always_non_stop_p): Delete. (x86_linux_create_target): Don't install x86_linux_always_non_stop_p.
2015-09-30Call strprefix instead of strncmp in event parsingDon Breazeal2-1/+6
This fixes a typo that used strncmp instead of strprefix when checking for an exec event in a stop reply packet. gdb/ChangeLog: * remote.c (remote_parse_stop_reply): Call strprefix instead of strncmp.
2015-09-30gdbarch.h: Change gdbarch_info::tdep_info's type to void *Simon Marchi8-7/+18
As reported by Ulrich here: https://sourceware.org/ml/gdb-patches/2015-09/msg00604.html The system compiler (gcc 4.1) in Centos 5 doesn't like that we cast to a pointer to a type that doesn't exist. I see no real value in using this kind iof construct over just using void *. So this patch changes the tdep_info field to void * and removes the casts. Even in C++, we should not need an explicit cast when assigning to a void *. gdb/ChangeLog: * gdbarch.sh (struct gdbarch_info): Change tdep_info's type to void *. * gdbarch.h: Regenerate. * i386-tdep.c (i386_gdbarch_init): Remove cast to struct gdbarch_tdep_info *. * mips-tdep.c (mips_gdbarch_init): Likewise. * ppc-linux-tdep (ppu2spu_sniffer): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Likewise. * spu-multiarch.c (spu_gdbarch): Likewise.
2015-09-30Shorten long lines in linux-aarch64-low.cYao Qi2-2/+9
Happen to see these lines are too long. This patch shortens them. gdb/gdbserver: 2015-09-30 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c (emit_movk): Shorten a long line. (emit_load_store_pair): Likewise.
2015-09-30py-type.exp: Do not run tests if binary fails to buildSimon Marchi2-23/+33
I noticed this while working on the test case. I believe it would make sense to skip running the tests if the binary failed to build. Although I would understand the opposite argument: if the binary does not build for some reason, we probably want to know about it, and some catastrophic failures in the tests might alarm us better than a timid "UNTESTED". gdb/testsuite/ChangeLog: * gdb.python/py-type.exp: Do not run tests if binaries fail to build.
2015-09-30Fix ChangeLog Date for previous push.Kevin Buettner1-1/+1
2015-09-30infcmd.c: Don't attempt to record a NULL value after a finish command.Kevin Buettner2-1/+7
Architectures which use RETURN_VALUE_STRUCT_CONVENTION will have a NULL return value after executing a finish command. See get_return_value() in infcmd.c. This patch avoids an eventual SIGSEV (caused by attempting to derefrence a NULL pointer) by adding a suitable test to finish_command_fsm_should_stop(). I encountered this problem while testing msp430: (gdb) PASS: gdb.base/structs.exp: zed L<n> for finish; return 1 structs-tc finish Run till exit from #0 fun1 () at /ironwood1/sourceware-git/msp430-elf/../binutils-gdb/gdb/testsuite/gdb.base/structs.c:125 ERROR: Process no longer exists gdb/ChangeLog: * infcmd.c (finish_command_fsm_should_stop): Don't attempt to record a NULL value.
2015-09-30btrace, testsuite: fix spurious gdb.btrace/tsx.exp failsMarkus Metzger2-7/+37
If the atomic section in x86-tsx.S is aborted, the tsx.exp test will fail even if the traced output is actually correct. Consider abort scenarios in the test. testsuite/ * gdb.btrace/tsx.exp: Consider multiple correct outputs in the record instruction-history test.
2015-09-29msp430: Fix bug regarding large memory model inferior function call arguments.Kevin Buettner2-3/+15
This change causes reference, struct, and union arguments to be treated the same as pointer arguments when determining the size of the value to place into a register. The case for doing this for reference arguments is obvious. The msp430 ABI specifies that struct and union arguments are passed by reference. This is why they're treated in the same manner as pointer and reference arguments when computing the size of the value to place into a register. In my testing using this multilib... msp430-sim/-msim/-mcpu=msp430x/-mlarge/-mdata-region=either/-mcode-region=either ... I find that the the following failures, 125 in all, are fixed by this patch. FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns char FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns short FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns int FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns long FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns float FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns double FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns float _Complex FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns double _Complex FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns long double _Complex FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns char * FAIL: gdb.base/callfuncs.exp: noproto: call inferior func with struct - returns char FAIL: gdb.base/callfuncs.exp: noproto: call inferior func with struct - returns short FAIL: gdb.base/callfuncs.exp: noproto: call inferior func with struct - returns int FAIL: gdb.base/callfuncs.exp: noproto: call inferior func with struct - returns long FAIL: gdb.base/callfuncs.exp: noproto: call inferior func with struct - returns float FAIL: gdb.base/callfuncs.exp: noproto: call inferior func with struct - returns double FAIL: gdb.base/callfuncs.exp: noproto: call inferior func with struct - returns float _Complex FAIL: gdb.base/callfuncs.exp: noproto: call inferior func with struct - returns double _Complex FAIL: gdb.base/callfuncs.exp: noproto: call inferior func with struct - returns long double _Complex FAIL: gdb.base/callfuncs.exp: noproto: call inferior func with struct - returns char * FAIL: gdb.base/structs.exp: p/c L<n>; call 1 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 3 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 4 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 5 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 6 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 7 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 8 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 9 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 10 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 11 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 12 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 13 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 14 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 15 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 16 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 17 structs-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 1 structs-ts FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-ts FAIL: gdb.base/structs.exp: p/c L<n>; call 3 structs-ts FAIL: gdb.base/structs.exp: p/c L<n>; call 4 structs-ts FAIL: gdb.base/structs.exp: p/c L<n>; call 5 structs-ts FAIL: gdb.base/structs.exp: p/c L<n>; call 1 structs-ti FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-ti FAIL: gdb.base/structs.exp: p/c L<n>; call 3 structs-ti FAIL: gdb.base/structs.exp: p/c L<n>; call 1 structs-tl FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tl FAIL: gdb.base/structs.exp: p/c L<n>; call 3 structs-tl FAIL: gdb.base/structs.exp: p/c L<n>; call 1 structs-tll FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tll FAIL: gdb.base/structs.exp: p/c L<n>; call 1 structs-tf FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tf FAIL: gdb.base/structs.exp: p/c L<n>; call 3 structs-tf FAIL: gdb.base/structs.exp: p/c L<n>; call 1 structs-td FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-td FAIL: gdb.base/structs.exp: p/c L<n>; call 1 structs-tld FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tld FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-ts-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 3 structs-ts-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 4 structs-ts-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 5 structs-ts-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 6 structs-ts-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 7 structs-ts-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 8 structs-ts-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-ti-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 3 structs-ti-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 4 structs-ti-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 5 structs-ti-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 6 structs-ti-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tl-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 3 structs-tl-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 4 structs-tl-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 5 structs-tl-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 6 structs-tl-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tll-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tf-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 3 structs-tf-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 4 structs-tf-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 5 structs-tf-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 6 structs-tf-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-td-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tld-tc FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tc-ts FAIL: gdb.base/structs.exp: p/c L<n>; call 3 structs-tc-ts FAIL: gdb.base/structs.exp: p/c L<n>; call 4 structs-tc-ts FAIL: gdb.base/structs.exp: p/c L<n>; call 5 structs-tc-ts FAIL: gdb.base/structs.exp: p/c L<n>; call 6 structs-tc-ts FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tc-ti FAIL: gdb.base/structs.exp: p/c L<n>; call 3 structs-tc-ti FAIL: gdb.base/structs.exp: p/c L<n>; call 4 structs-tc-ti FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tc-tl FAIL: gdb.base/structs.exp: p/c L<n>; call 3 structs-tc-tl FAIL: gdb.base/structs.exp: p/c L<n>; call 4 structs-tc-tl FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tc-tll FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tc-tf FAIL: gdb.base/structs.exp: p/c L<n>; call 3 structs-tc-tf FAIL: gdb.base/structs.exp: p/c L<n>; call 4 structs-tc-tf FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tc-td FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tc-tld FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-td-tf FAIL: gdb.base/structs.exp: p/c L<n>; call 2 structs-tf-td FAIL: gdb.cp/classes.exp: call class_param.Aref_a (g_A) FAIL: gdb.cp/classes.exp: call class_param.Aref_x (g_A) FAIL: gdb.cp/classes.exp: call class_param.Aref_a (g_B) FAIL: gdb.cp/classes.exp: call class_param.Aref_x (g_B) FAIL: gdb.cp/classes.exp: call class_param.Aval_a (g_A) FAIL: gdb.cp/classes.exp: call class_param.Aval_x (g_A) FAIL: gdb.cp/classes.exp: call class_param.Aval_a (g_B) FAIL: gdb.cp/classes.exp: call class_param.Aval_x (g_B) FAIL: gdb.cp/ref-params.exp: print value of f1 on Child in main FAIL: gdb.cp/ref-params.exp: print value of f2 on Child in main FAIL: gdb.cp/ref-params.exp: print value of f1 on (Child&) in main FAIL: gdb.cp/ref-params.exp: print value of f2 on (Child&) in main FAIL: gdb.cp/ref-params.exp: print value of f1 on Child& in f2 FAIL: gdb.cp/ref-params.exp: print f1(MQ) FAIL: gdb.cp/ref-params.exp: print mf1(MQ) FAIL: gdb.cp/ref-params.exp: print mf2(MQ) FAIL: gdb.cp/ref-params.exp: print f1(MQR) FAIL: gdb.cp/ref-params.exp: print mf1(MQR) FAIL: gdb.cp/ref-params.exp: print mf2(MQR) FAIL: gdb.python/py-xmethods.exp: Before: a1 + a2 FAIL: gdb.python/py-xmethods.exp: Before: a2 - a1 FAIL: gdb.python/py-xmethods.exp: Before: b1 - a1 FAIL: gdb.python/py-xmethods.exp: After: a2 - a1 FAIL: gdb.python/py-xmethods.exp: After: b1 - a1 gdb/ChangeLog: * msp430-tdep.c (msp430_push_dummy_call): Treat reference, struct, and union arguments the same as pointer arguments when determining size of argument.
2015-09-29Undo accidental commitjamesbowman1-39/+6
2015-09-29Rebase patch #7jamesbowman1-6/+39
2015-09-29[FT32] Replace hard-coded instruction patterns with macrosjamesbowman2-9/+12
The stack unwinder can now use FT32_*() macros to interpet binary instructions instead of local definitions. 2015-09-29 James Bowman <james.bowman@ftdichip.com> * ft32-tdep.c: #include "opcode/ft32.h". Delete local macros IS_PUSH, PUSH_REG, IS_LINK, LINK_SIZE. (ft32_analyze_prologue): Use FT32_* macros.
2015-09-28Fix last commit's ChangeLogSimon Marchi1-1/+1
I somehow managed to do the same mistake in my ChangeLog entry as what I was trying to fix in the code...
2015-09-28cli-script.c: Fix read_next_line's commentSimon Marchi2-2/+7
It seems obvious to me that stdout should in fact be stdin. gdb/ChangeLog: * cli/cli-script.c (read_next_line): Fix stdout -> stdout in comment.
2015-09-28gdb.base/gcore.c (array_func): Add reference to static_array.Doug Evans2-0/+6
Otherwise clang will delete it: it's otherwise unused. gdb/testsuite/ChangeLog: * gdb.base/gcore.c (array_func): Add reference to static_array.
2015-09-28MAINTAINERS: Add Iain Buclaw as D language maintainer.Doug Evans2-0/+5
gdb/ChangeLog: * MAINTAINERS: Add Iain Buclaw as D language maintainer.
2015-09-28common/filestuff.c (make_cleanup_close): Update comment.Doug Evans2-1/+5
gdb/ChangeLog: * common/filestuff.c (make_cleanup_close): Update comment.
2015-09-26Fix cast of xml_find_attribute's return valueSimon Marchi6-12/+22
The cast auto-insert script inserted long unsigned int, but we should use the typedef ULONGEST. Fixes build failures on i386. gdb/ChangeLog: * btrace.c (parse_xml_btrace_block): Fix cast of xml_find_attribute's return value. * memory-map.c (memory_map_start_memory): Likewise. * solib-svr4.c (library_list_start_library): Likewise. * solib-target.c (library_list_start_segment): Likewise. (library_list_start_section): Likewise. * tracepoint.c (traceframe_info_start_memory): Likewise.
2015-09-26[D] Fix regression in py-lookup-type.expIain Buclaw2-7/+41
In the console interpreter, primitive types are resolved in the expression parser. However that didn't take into consideration the script interface. gdb/ChangeLog: * d-namespace.c (d_lookup_symbol): New arg langdef. All callers updated. Support looking up symbol as a primitive type. (lookup_module_scope): New arg langdef. All callers updated. Call d_lookup_symbol directly for simple bare symbols.
2015-09-25Fix typo in syntax of record instruction-history begin, end.Doug Evans2-2/+8
gdb/doc/ChangeLog: * gdb.texinfo (Process Record and Replay): Fix syntax of "record instruction-history begin, end" and "record function-call-history begin, end".
2015-09-25Add some more casts (2/2)Simon Marchi127-701/+1404
See previous patch's description. gdb/ChangeLog: * macrocmd.c (print_macro_callback): Add cast(s). * macrotab.c (macro_bcache_str): Likewise. (new_macro_definition): Likewise. * main.c (captured_main): Likewise. * maint.c (print_bfd_section_info): Likewise. * mdebugread.c (mdebug_build_psymtabs): Likewise. (basic_type): Likewise. * memattr.c (mem_region_cmp): Likewise. * memory-map.c (memory_map_start_memory): Likewise. (memory_map_end_memory): Likewise. (memory_map_start_property): Likewise. (memory_map_end_property): Likewise. (clear_result): Likewise. * memrange.c (compare_mem_ranges): Likewise. * mep-tdep.c (mep_analyze_frame_prologue): Likewise. * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Likewise. * mi/mi-console.c (mi_console_file_delete): Likewise. (mi_console_file_fputs): Likewise. (mi_console_raw_packet): Likewise. (mi_console_file_flush): Likewise. (mi_console_set_raw): Likewise. * mi/mi-interp.c (mi_interpreter_resume): Likewise. (mi_new_thread): Likewise. (mi_thread_exit): Likewise. (mi_record_changed): Likewise. (mi_inferior_added): Likewise. (mi_inferior_appeared): Likewise. (mi_inferior_exit): Likewise. (mi_inferior_removed): Likewise. (mi_interp_data): Likewise. (mi_on_normal_stop): Likewise. (mi_traceframe_changed): Likewise. (mi_tsv_created): Likewise. (mi_tsv_deleted): Likewise. (mi_tsv_modified): Likewise. (mi_breakpoint_created): Likewise. (mi_breakpoint_deleted): Likewise. (mi_breakpoint_modified): Likewise. (mi_output_running_pid): Likewise. (mi_inferior_count): Likewise. (mi_solib_loaded): Likewise. (mi_solib_unloaded): Likewise. (mi_command_param_changed): Likewise. (mi_memory_changed): Likewise. (report_initial_inferior): Likewise. (mi_ui_out): Likewise. (mi_set_logging): Likewise. * mi/mi-main.c (collect_cores): Likewise. (print_one_inferior): Likewise. (free_vector_of_ints): Likewise. (free_splay_tree): Likewise. (mi_execute_command): Likewise. * mi/mi-out.c (mi_table_body): Likewise. (mi_table_end): Likewise. (mi_table_header): Likewise. (mi_begin): Likewise. (mi_end): Likewise. (mi_field_int): Likewise. (mi_field_string): Likewise. (mi_field_fmt): Likewise. (mi_flush): Likewise. (mi_redirect): Likewise. (field_separator): Likewise. (mi_open): Likewise. (mi_close): Likewise. (mi_out_buffered): Likewise. (mi_out_rewind): Likewise. (mi_out_put): Likewise. (mi_version): Likewise. (mi_out_data_dtor): Likewise. * mi/mi-parse.c (mi_parse_cleanup): Likewise. * microblaze-tdep.c (microblaze_frame_cache): Likewise. * minidebug.c (lzma_open): Likewise. (lzma_pread): Likewise. (lzma_close): Likewise. (lzma_stat): Likewise. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * mips-sde-tdep.c (mips_sde_frame_cache): Likewise. (mips_sde_elf_osabi_sniff_abi_tag_sections): Likewise. * mips-tdep.c (mips_insn16_frame_cache): Likewise. (mips_micro_frame_cache): Likewise. (mips_insn32_frame_cache): Likewise. (mips_stub_frame_cache): Likewise. (gdb_print_insn_mips): Likewise. (value_of_mips_user_reg): Likewise. (mips_gdbarch_init): Likewise. * mips64obsd-tdep.c (mips64obsd_supply_gregset): Likewise. * mipsnbsd-tdep.c (mipsnbsd_supply_fpregset): Likewise. (mipsnbsd_supply_gregset): Likewise. * mn10300-linux-tdep.c (am33_supply_fpregset_method): Likewise. (am33_collect_gregset_method): Likewise. (am33_collect_fpregset_method): Likewise. * mn10300-tdep.c (mn10300_analyze_frame_prologue): Likewise. * moxie-tdep.c (moxie_frame_cache): Likewise. * msp430-tdep.c (msp430_get_opcode_byte): Likewise. (msp430_analyze_frame_prologue): Likewise. * mt-tdep.c (mt_frame_unwind_cache): Likewise. * nios2-linux-tdep.c (nios2_supply_gregset): Likewise. (nios2_collect_gregset): Likewise. * nios2-tdep.c (nios2_frame_unwind_cache): Likewise. (nios2_stub_frame_cache): Likewise. * objc-lang.c (find_methods): Likewise. * objfiles.c (objfiles_pspace_data_cleanup): Likewise. (get_objfile_pspace_data): Likewise. (get_objfile_bfd_data): Likewise. (objfile_bfd_data_free): Likewise. (add_to_objfile_sections): Likewise. (do_free_objfile_cleanup): Likewise. (resume_section_map_updates_cleanup): Likewise. * opencl-lang.c (builtin_opencl_type): Likewise. * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise. * osdata.c (osdata_start_osdata): Likewise. (osdata_start_item): Likewise. (osdata_start_column): Likewise. (osdata_end_column): Likewise. (clear_parsing_data): Likewise. (osdata_free_cleanup): Likewise. * parse.c (type_stack_cleanup): Likewise. (exp_uses_objfile_iter): Likewise. * ppc-linux-tdep.c (ppc_linux_supply_gregset): Likewise. (ppc_linux_collect_gregset): Likewise. (ppu2spu_prev_arch): Likewise. (ppu2spu_this_id): Likewise. (ppu2spu_prev_register): Likewise. (ppu2spu_unwind_register): Likewise. (ppu2spu_sniffer): Likewise. (ppu2spu_dealloc_cache): Likewise. (ppc_linux_init_abi): Likewise. * ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise. * progspace.c (restore_program_space): Likewise. * psymtab.c (find_pc_sect_psymtab): Likewise. (compare_psymbols): Likewise. (psymbol_bcache_full): Likewise. (allocate_psymtab): Likewise. (discard_psymtabs_upto): Likewise. * python/py-block.c (set_block): Likewise. (del_objfile_blocks): Likewise. * python/py-breakpoint.c (build_bp_list): Likewise. * python/py-inferior.c (inferior_to_inferior_object): Likewise. (build_inferior_list): Likewise. (py_free_inferior): Likewise. * python/py-objfile.c (py_free_objfile): Likewise. (objfile_to_objfile_object): Likewise. * python/py-prettyprint.c (py_restore_tstate): Likewise. * python/py-progspace.c (py_free_pspace): Likewise. (pspace_to_pspace_object): Likewise. * python/py-symbol.c (set_symbol): Likewise. (del_objfile_symbols): Likewise. * python/py-symtab.c (set_sal): Likewise. (set_symtab): Likewise. (del_objfile_symtab): Likewise. (del_objfile_sal): Likewise. * python/py-type.c (save_objfile_types): Likewise. (set_type): Likewise. * python/py-unwind.c (pyuw_prev_register): Likewise. (pyuw_on_new_gdbarch): Likewise. * python/py-utils.c (py_decref): Likewise. (py_xdecref): Likewise. (gdb_py_generic_dict): Likewise. * python/py-xmethods.c (gdbpy_free_xmethod_worker_data): Likewise. (gdbpy_clone_xmethod_worker_data): Likewise. (gdbpy_get_xmethod_arg_types): Likewise. (gdbpy_get_xmethod_result_type): Likewise. (gdbpy_invoke_xmethod): Likewise. * python/python.c (gdbpy_apply_type_printers): Likewise. (gdbpy_free_type_printers): Likewise. * record-btrace.c (record_btrace_disable_callback): Likewise. (bfcache_hash): Likewise. (bfcache_eq): Likewise. (btrace_get_frame_function): Likewise. (record_btrace_frame_unwind_stop_reason): Likewise. (record_btrace_frame_this_id): Likewise. (record_btrace_frame_prev_register): Likewise. (record_btrace_frame_dealloc_cache): Likewise. * record-full.c (record_full_message_wrapper): Likewise. (record_full_save_cleanups): Likewise. * regcache.c (regcache_descr): Likewise. (do_regcache_xfree): Likewise. (do_regcache_invalidate): Likewise. (do_cooked_read): Likewise. (regcache_transfer_regset): Likewise. * reggroups.c (reggroup_add): Likewise. (reggroup_next): Likewise. (reggroup_prev): Likewise. * remote-fileio.c (do_remote_fileio_request): Likewise. * remote-notif.c (remote_async_get_pending_events_handler): Likewise. (do_notif_event_xfree): Likewise. * remote.c (get_remote_arch_state): Likewise. (remote_pspace_data_cleanup): Likewise. (get_remote_exec_file): Likewise. (set_pspace_remote_exec_file): Likewise. (compare_pnums): Likewise. (clear_threads_listing_context): Likewise. (remote_newthread_step): Likewise. (start_thread): Likewise. (end_thread): Likewise. (remove_child_of_pending_fork): Likewise. (remove_stop_reply_for_inferior): Likewise. (remove_stop_reply_of_remote_state): Likewise. (remote_notif_remove_once_on_match): Likewise. (stop_reply_match_ptid_and_ws): Likewise. (kill_child_of_pending_fork): Likewise. (register_remote_g_packet_guess): Likewise. (remote_read_description_p): Likewise. (remote_read_description): Likewise. (free_actions_list_cleanup_wrapper): Likewise. (remote_async_serial_handler): Likewise. * rl78-tdep.c (rl78_get_opcode_byte): Likewise. (rl78_analyze_frame_prologue): Likewise. * rs6000-tdep.c (ppc_supply_gregset): Likewise. (ppc_supply_fpregset): Likewise. (ppc_supply_vsxregset): Likewise. (ppc_supply_vrregset): Likewise. (ppc_collect_gregset): Likewise. (ppc_collect_fpregset): Likewise. (ppc_collect_vsxregset): Likewise. (ppc_collect_vrregset): Likewise. (e500_move_ev_register): Likewise. (do_regcache_raw_write): Likewise. (rs6000_frame_cache): Likewise. (rs6000_epilogue_frame_cache): Likewise. (rs6000_gdbarch_init): Likewise. * rx-tdep.c (rx_get_opcode_byte): Likewise. (rx_analyze_frame_prologue): Likewise. (rx_frame_type): Likewise. (rx_frame_sniffer_common): Likewise. * s390-linux-tdep.c (s390_check_for_saved): Likewise. (s390_frame_unwind_cache): Likewise. (s390_stub_frame_unwind_cache): Likewise. (s390_sigtramp_frame_unwind_cache): Likewise. * score-tdep.c (score_make_prologue_cache): Likewise. * sentinel-frame.c (sentinel_frame_prev_register): Likewise. (sentinel_frame_prev_arch): Likewise. * ser-base.c (fd_event): Likewise. (push_event): Likewise. (ser_base_write): Likewise. * ser-pipe.c (pipe_close): Likewise. * serial.c (serial_write): Likewise. * sh-tdep.c (sh_frame_cache): Likewise. (sh_stub_this_id): Likewise. * sh64-tdep.c (sh64_frame_cache): Likewise. * solib-aix.c (get_solib_aix_inferior_data): Likewise. (library_list_start_library): Likewise. (library_list_start_list): Likewise. (solib_aix_free_library_list): Likewise. * solib-darwin.c (get_darwin_info): Likewise. * solib-dsbt.c (get_dsbt_info): Likewise. * solib-spu.c (append_ocl_sos): Likewise. * solib-svr4.c (svr4_pspace_data_cleanup): Likewise. (get_svr4_info): Likewise. (library_list_start_library): Likewise. (svr4_library_list_start_list): Likewise. (hash_probe_and_action): Likewise. (equal_probe_and_action): Likewise. (svr4_update_solib_event_breakpoint): Likewise. (set_solib_svr4_fetch_link_map_offsets): Likewise. (svr4_fetch_link_map_offsets): Likewise. (svr4_have_link_map_offsets): Likewise. * solib-target.c (library_list_start_segment): Likewise. (library_list_start_section): Likewise. (library_list_start_library): Likewise. (library_list_end_library): Likewise. (library_list_start_list): Likewise. (solib_target_free_library_list): Likewise. * solib.c (solib_ops): Likewise. (set_solib_ops): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise. * sparc-tdep.c (sparc_frame_cache): Likewise. (sparc32_frame_cache): Likewise. (sparc32_supply_gregset): Likewise. (sparc32_collect_gregset): Likewise. (sparc32_supply_fpregset): Likewise. (sparc32_collect_fpregset): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise. * sparc64-tdep.c (sparc64_supply_gregset): Likewise. (sparc64_collect_gregset): Likewise. (sparc64_supply_fpregset): Likewise. (sparc64_collect_fpregset): Likewise. * sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_cache): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_cache): Likewise. * sparc64obsd-tdep.c (sparc64obsd_frame_cache): Likewise. (sparc64obsd_trapframe_cache): Likewise. * sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_cache): Likewise. * sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_cache): Likewise. * spu-multiarch.c (spu_gdbarch): Likewise. * spu-tdep.c (spu_frame_unwind_cache): Likewise. (spu2ppu_prev_arch): Likewise. (spu2ppu_this_id): Likewise. (spu2ppu_prev_register): Likewise. (spu2ppu_dealloc_cache): Likewise. (spu_dis_asm_print_address): Likewise. (gdb_print_insn_spu): Likewise. (spu_get_overlay_table): Likewise. * stabsread.c (rs6000_builtin_type): Likewise. * stack.c (do_print_variable_and_value): Likewise. * stap-probe.c (get_stap_base_address_1): Likewise. * symfile-debug.c (debug_qf_has_symbols): Likewise. (debug_qf_find_last_source_symtab): Likewise. (debug_qf_forget_cached_source_info): Likewise. (debug_qf_map_symtabs_matching_filename): Likewise. (debug_qf_lookup_symbol): Likewise. (debug_qf_print_stats): Likewise. (debug_qf_dump): Likewise. (debug_qf_relocate): Likewise. (debug_qf_expand_symtabs_for_function): Likewise. (debug_qf_expand_all_symtabs): Likewise. (debug_qf_expand_symtabs_with_fullname): Likewise. (debug_qf_map_matching_symbols): Likewise. (debug_qf_expand_symtabs_matching): Likewise. (debug_qf_find_pc_sect_compunit_symtab): Likewise. (debug_qf_map_symbol_filenames): Likewise. (debug_sym_get_probes): Likewise. (debug_sym_new_init): Likewise. (debug_sym_init): Likewise. (debug_sym_read): Likewise. (debug_sym_read_psymbols): Likewise. (debug_sym_finish): Likewise. (debug_sym_offsets): Likewise. (debug_sym_read_linetable): Likewise. (debug_sym_relocate): Likewise. (uninstall_symfile_debug_logging): Likewise. * symfile-mem.c (symbol_file_add_from_memory_wrapper): Likewise. * symfile.c (place_section): Likewise. (add_section_size_callback): Likewise. (load_progress): Likewise. (load_section_callback): Likewise. (clear_memory_write_data): Likewise. (allocate_symtab): Likewise. * symmisc.c (maintenance_expand_file_matcher): Likewise. * symtab.c (lookup_symtab_callback): Likewise. (hash_demangled_name_entry): Likewise. (eq_demangled_name_entry): Likewise. (get_symbol_cache): Likewise. (symbol_cache_cleanup): Likewise. (set_symbol_cache_size): Likewise. (symbol_cache_flush): Likewise. (maintenance_print_symbol_cache): Likewise. (maintenance_print_symbol_cache_statistics): Likewise. (delete_filename_seen_cache): Likewise. (output_partial_symbol_filename): Likewise. (search_symbols_file_matches): Likewise. (search_symbols_name_matches): Likewise. (do_free_completion_list): Likewise. (maybe_add_partial_symtab_filename): Likewise. (get_main_info): Likewise. (main_info_cleanup): Likewise. * target-dcache.c (target_dcache_cleanup): Likewise. (target_dcache_init_p): Likewise. (target_dcache_invalidate): Likewise. (target_dcache_get): Likewise. (target_dcache_get_or_init): Likewise. * target-descriptions.c (target_find_description): Likewise. (tdesc_find_type): Likewise. (tdesc_data_cleanup): Likewise. (tdesc_find_arch_register): Likewise. (tdesc_register_name): Likewise. (tdesc_register_type): Likewise. (tdesc_register_reggroup_p): Likewise. (set_tdesc_pseudo_register_name): Likewise. (set_tdesc_pseudo_register_type): Likewise. (set_tdesc_pseudo_register_reggroup_p): Likewise. (tdesc_use_registers): Likewise. (free_target_description): Likewise. * target-memory.c (compare_block_starting_address): Likewise. (cleanup_request_data): Likewise. (cleanup_write_requests_vector): Likewise. * target.c (open_target): Likewise. (cleanup_restore_target_terminal): Likewise. (free_memory_read_result_vector): Likewise. * thread.c (disable_thread_stack_temporaries): Likewise. (finish_thread_state_cleanup): Likewise. (do_restore_current_thread_cleanup): Likewise. (restore_current_thread_cleanup_dtor): Likewise. (set_thread_refcount): Likewise. (tp_array_compar): Likewise. (do_captured_thread_select): Likewise. * tic6x-tdep.c (tic6x_frame_unwind_cache): Likewise. (tic6x_stub_this_id): Likewise. * tilegx-tdep.c (tilegx_frame_cache): Likewise. * top.c (do_restore_instream_cleanup): Likewise. (gdb_readline_wrapper_cleanup): Likewise. (kill_or_detach): Likewise. (print_inferior_quit_action): Likewise. * tracefile-tfile.c (match_blocktype): Likewise. (build_traceframe_info): Likewise. * tracefile.c (trace_file_writer_xfree): Likewise. * tracepoint.c (memrange_cmp): Likewise. (do_collect_symbol): Likewise. (do_clear_collection_list): Likewise. (do_restore_current_traceframe_cleanup): Likewise. (restore_current_traceframe_cleanup_dtor): Likewise. (free_current_marker): Likewise. (traceframe_info_start_memory): Likewise. (traceframe_info_start_tvar): Likewise. (free_result): Likewise. * tramp-frame.c (tramp_frame_cache): Likewise. * tui/tui-file.c (tui_file_delete): Likewise. (tui_fileopen): Likewise. (tui_sfileopen): Likewise. (tui_file_isatty): Likewise. (tui_file_rewind): Likewise. (tui_file_put): Likewise. (tui_file_fputs): Likewise. (tui_file_get_strbuf): Likewise. (tui_file_adjust_strbuf): Likewise. (tui_file_flush): Likewise. * tui/tui-layout.c (make_command_window): Likewise. (make_data_window): Likewise. (show_source_disasm_command): Likewise. (show_data): Likewise. (make_source_or_disasm_window): Likewise. (show_source_or_disasm_and_command): Likewise. * tui/tui-out.c (tui_field_int): Likewise. (tui_field_string): Likewise. (tui_field_fmt): Likewise. (tui_text): Likewise. * typeprint.c (hash_typedef_field): Likewise. (eq_typedef_field): Likewise. (do_free_typedef_hash): Likewise. (copy_typedef_hash_element): Likewise. (do_free_global_table): Likewise. (find_global_typedef): Likewise. (find_typedef_in_hash): Likewise. * ui-file.c (ui_file_write_for_put): Likewise. (do_ui_file_xstrdup): Likewise. (mem_file_delete): Likewise. (mem_file_rewind): Likewise. (mem_file_put): Likewise. (mem_file_write): Likewise. (stdio_file_delete): Likewise. (stdio_file_flush): Likewise. (stdio_file_read): Likewise. (stdio_file_write): Likewise. (stdio_file_write_async_safe): Likewise. (stdio_file_fputs): Likewise. (stdio_file_isatty): Likewise. (stdio_file_fseek): Likewise. (tee_file_delete): Likewise. (tee_file_flush): Likewise. (tee_file_write): Likewise. (tee_file_fputs): Likewise. (tee_file_isatty): Likewise. * ui-out.c (do_cleanup_table_end): Likewise. (do_cleanup_end): Likewise. * user-regs.c (user_reg_add): Likewise. (user_reg_map_name_to_regnum): Likewise. (usernum_to_user_reg): Likewise. (maintenance_print_user_registers): Likewise. * utils.c (do_bfd_close_cleanup): Likewise. (do_fclose_cleanup): Likewise. (do_obstack_free): Likewise. (do_ui_file_delete): Likewise. (do_ui_out_redirect_pop): Likewise. (do_free_section_addr_info): Likewise. (restore_integer): Likewise. (do_unpush_target): Likewise. (do_htab_delete_cleanup): Likewise. (do_restore_ui_file): Likewise. (do_value_free): Likewise. (do_free_so): Likewise. (free_current_contents): Likewise. (do_regfree_cleanup): Likewise. (core_addr_hash): Likewise. (core_addr_eq): Likewise. (do_free_char_ptr_vec): Likewise. * v850-tdep.c (v850_frame_cache): Likewise. * varobj.c (do_free_variable_cleanup): Likewise. * vax-tdep.c (vax_supply_gregset): Likewise. (vax_frame_cache): Likewise. * vaxobsd-tdep.c (vaxobsd_sigtramp_frame_cache): Likewise. * xml-support.c (gdb_xml_body_text): Likewise. (gdb_xml_values_cleanup): Likewise. (gdb_xml_start_element): Likewise. (gdb_xml_start_element_wrapper): Likewise. (gdb_xml_end_element): Likewise. (gdb_xml_end_element_wrapper): Likewise. (gdb_xml_cleanup): Likewise. (gdb_xml_fetch_external_entity): Likewise. (gdb_xml_parse_attr_enum): Likewise. (xinclude_start_include): Likewise. (xinclude_end_include): Likewise. (xml_xinclude_default): Likewise. (xml_xinclude_start_doctype): Likewise. (xml_xinclude_end_doctype): Likewise. (xml_xinclude_cleanup): Likewise. (xml_fetch_content_from_file): Likewise. * xml-syscall.c (free_syscalls_info): Likewise. (syscall_start_syscall): Likewise. * xml-tdesc.c (tdesc_end_arch): Likewise. (tdesc_end_osabi): Likewise. (tdesc_end_compatible): Likewise. (tdesc_start_target): Likewise. (tdesc_start_feature): Likewise. (tdesc_start_reg): Likewise. (tdesc_start_union): Likewise. (tdesc_start_struct): Likewise. (tdesc_start_flags): Likewise. (tdesc_start_field): Likewise. (tdesc_start_vector): Likewise. (fetch_available_features_from_target): Likewise. * xstormy16-tdep.c (xstormy16_frame_cache): Likewise. * xtensa-tdep.c (xtensa_supply_gregset): Likewise. (xtensa_frame_cache): Likewise. (xtensa_frame_prev_register): Likewise. (xtensa_extract_return_value): Likewise.
2015-09-25Add some more casts (1/2)Simon Marchi133-649/+1352
Note: I needed to split this patch in two, otherwise it's too big for the mailing list. This patch adds explicit casts to situations where a void pointer is assigned to a pointer to the "real" type. Building in C++ mode requires those assignments to use an explicit cast. This includes, for example: - callback arguments (cleanups, comparison functions, ...) - data attached to some object (objfile, program space, etc) in the form of a void pointer - "user data" passed to some function This patch comes from the commit "(mostly) auto-generated patch to insert casts needed for C++", taken from Pedro's C++ branch. Only files built on x86 with --enable-targets=all are modified, so the native files for other arches will need to be dealt with separately. I built-tested this with --enable-targets=all and reg-tested. To my surprise, a test case (selftest.exp) had to be adjusted. Here's the ChangeLog entry. Again, this was relatively quick to make despite the length, thanks to David Malcom's script, although I don't believe it's very useful information in that particular case... gdb/ChangeLog: * aarch64-tdep.c (aarch64_make_prologue_cache): Add cast(s). (aarch64_make_stub_cache): Likewise. (value_of_aarch64_user_reg): Likewise. * ada-lang.c (ada_inferior_data_cleanup): Likewise. (get_ada_inferior_data): Likewise. (get_ada_pspace_data): Likewise. (ada_pspace_data_cleanup): Likewise. (ada_complete_symbol_matcher): Likewise. (ada_exc_search_name_matches): Likewise. * ada-tasks.c (get_ada_tasks_pspace_data): Likewise. (get_ada_tasks_inferior_data): Likewise. * addrmap.c (addrmap_mutable_foreach_worker): Likewise. (splay_obstack_alloc): Likewise. (splay_obstack_free): Likewise. * alpha-linux-tdep.c (alpha_linux_supply_gregset): Likewise. (alpha_linux_collect_gregset): Likewise. (alpha_linux_supply_fpregset): Likewise. (alpha_linux_collect_fpregset): Likewise. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise. * alpha-tdep.c (alpha_lds): Likewise. (alpha_sts): Likewise. (alpha_sigtramp_frame_unwind_cache): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_supply_int_regs): Likewise. (alpha_fill_int_regs): Likewise. (alpha_supply_fp_regs): Likewise. (alpha_fill_fp_regs): Likewise. * alphanbsd-tdep.c (alphanbsd_supply_fpregset): Likewise. (alphanbsd_aout_supply_gregset): Likewise. (alphanbsd_supply_gregset): Likewise. * amd64-linux-tdep.c (amd64_linux_init_abi): Likewise. (amd64_x32_linux_init_abi): Likewise. * amd64-nat.c (amd64_supply_native_gregset): Likewise. (amd64_collect_native_gregset): Likewise. * amd64-tdep.c (amd64_frame_cache): Likewise. (amd64_sigtramp_frame_cache): Likewise. (amd64_epilogue_frame_cache): Likewise. (amd64_supply_fxsave): Likewise. (amd64_supply_xsave): Likewise. (amd64_collect_fxsave): Likewise. (amd64_collect_xsave): Likewise. * amd64-windows-tdep.c (amd64_windows_frame_cache): Likewise. * amd64obsd-tdep.c (amd64obsd_trapframe_cache): Likewise. * arm-linux-tdep.c (arm_linux_supply_gregset): Likewise. (arm_linux_collect_gregset): Likewise. (arm_linux_supply_nwfpe): Likewise. (arm_linux_collect_nwfpe): Likewise. (arm_linux_supply_vfp): Likewise. (arm_linux_collect_vfp): Likewise. * arm-tdep.c (arm_find_mapping_symbol): Likewise. (arm_prologue_unwind_stop_reason): Likewise. (arm_prologue_this_id): Likewise. (arm_prologue_prev_register): Likewise. (arm_exidx_data_free): Likewise. (arm_find_exidx_entry): Likewise. (arm_stub_this_id): Likewise. (arm_m_exception_this_id): Likewise. (arm_m_exception_prev_register): Likewise. (arm_normal_frame_base): Likewise. (gdb_print_insn_arm): Likewise. (arm_objfile_data_free): Likewise. (arm_record_special_symbol): Likewise. (value_of_arm_user_reg): Likewise. * armbsd-tdep.c (armbsd_supply_fpregset): Likewise. (armbsd_supply_gregset): Likewise. * auto-load.c (auto_load_pspace_data_cleanup): Likewise. (get_auto_load_pspace_data): Likewise. (hash_loaded_script_entry): Likewise. (eq_loaded_script_entry): Likewise. (clear_section_scripts): Likewise. (collect_matching_scripts): Likewise. * auxv.c (auxv_inferior_data_cleanup): Likewise. (get_auxv_inferior_data): Likewise. * avr-tdep.c (avr_frame_unwind_cache): Likewise. * ax-general.c (do_free_agent_expr_cleanup): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. (target_bfd_xclose): Likewise. (target_bfd_get_section_table): Likewise. * bfin-tdep.c (bfin_frame_cache): Likewise. * block.c (find_block_in_blockvector): Likewise. (call_site_for_pc): Likewise. (block_find_non_opaque_type_preferred): Likewise. * break-catch-sig.c (signal_catchpoint_insert_location): Likewise. (signal_catchpoint_remove_location): Likewise. (signal_catchpoint_breakpoint_hit): Likewise. (signal_catchpoint_print_one): Likewise. (signal_catchpoint_print_mention): Likewise. (signal_catchpoint_print_recreate): Likewise. * break-catch-syscall.c (get_catch_syscall_inferior_data): Likewise. * breakpoint.c (do_cleanup_counted_command_line): Likewise. (bp_location_compare_addrs): Likewise. (get_first_locp_gte_addr): Likewise. (check_tracepoint_command): Likewise. (do_map_commands_command): Likewise. (get_breakpoint_objfile_data): Likewise. (free_breakpoint_probes): Likewise. (do_captured_breakpoint_query): Likewise. (compare_breakpoints): Likewise. (bp_location_compare): Likewise. (bpstat_remove_breakpoint_callback): Likewise. (do_delete_breakpoint_cleanup): Likewise. * bsd-uthread.c (bsd_uthread_set_supply_uthread): Likewise. (bsd_uthread_set_collect_uthread): Likewise. (bsd_uthread_activate): Likewise. (bsd_uthread_fetch_registers): Likewise. (bsd_uthread_store_registers): Likewise. * btrace.c (check_xml_btrace_version): Likewise. (parse_xml_btrace_block): Likewise. (parse_xml_btrace_pt_config_cpu): Likewise. (parse_xml_btrace_pt_raw): Likewise. (parse_xml_btrace_pt): Likewise. (parse_xml_btrace_conf_bts): Likewise. (parse_xml_btrace_conf_pt): Likewise. (do_btrace_data_cleanup): Likewise. * c-typeprint.c (find_typedef_for_canonicalize): Likewise. * charset.c (cleanup_iconv): Likewise. (do_cleanup_iterator): Likewise. * cli-out.c (cli_uiout_dtor): Likewise. (cli_table_begin): Likewise. (cli_table_body): Likewise. (cli_table_end): Likewise. (cli_table_header): Likewise. (cli_begin): Likewise. (cli_end): Likewise. (cli_field_int): Likewise. (cli_field_skip): Likewise. (cli_field_string): Likewise. (cli_field_fmt): Likewise. (cli_spaces): Likewise. (cli_text): Likewise. (cli_message): Likewise. (cli_wrap_hint): Likewise. (cli_flush): Likewise. (cli_redirect): Likewise. (out_field_fmt): Likewise. (field_separator): Likewise. (cli_out_set_stream): Likewise. * cli/cli-cmds.c (compare_symtabs): Likewise. * cli/cli-dump.c (call_dump_func): Likewise. (restore_section_callback): Likewise. * cli/cli-script.c (clear_hook_in_cleanup): Likewise. (do_restore_user_call_depth): Likewise. (do_free_command_lines_cleanup): Likewise. * coff-pe-read.c (get_section_vmas): Likewise. (pe_as16): Likewise. (pe_as32): Likewise. * coffread.c (coff_symfile_read): Likewise. * common/agent.c (agent_look_up_symbols): Likewise. * common/filestuff.c (do_close_cleanup): Likewise. * common/format.c (free_format_pieces_cleanup): Likewise. * common/vec.c (vec_o_reserve): Likewise. * compile/compile-c-support.c (print_one_macro): Likewise. * compile/compile-c-symbols.c (hash_symbol_error): Likewise. (eq_symbol_error): Likewise. (del_symbol_error): Likewise. (error_symbol_once): Likewise. (gcc_convert_symbol): Likewise. (gcc_symbol_address): Likewise. (hash_symname): Likewise. (eq_symname): Likewise. * compile/compile-c-types.c (hash_type_map_instance): Likewise. (eq_type_map_instance): Likewise. (insert_type): Likewise. (convert_type): Likewise. * compile/compile-object-load.c (munmap_listp_free_cleanup): Likewise. (setup_sections): Likewise. (link_hash_table_free): Likewise. (copy_sections): Likewise. * compile/compile-object-run.c (do_module_cleanup): Likewise. * compile/compile.c (compile_print_value): Likewise. (do_rmdir): Likewise. (cleanup_compile_instance): Likewise. (cleanup_unlink_file): Likewise. * completer.c (free_completion_tracker): Likewise. * corelow.c (add_to_spuid_list): Likewise. * cp-namespace.c (reset_directive_searched): Likewise. * cp-support.c (reset_directive_searched): Likewise. * cris-tdep.c (cris_sigtramp_frame_unwind_cache): Likewise. (cris_frame_unwind_cache): Likewise. * d-lang.c (builtin_d_type): Likewise. * d-namespace.c (reset_directive_searched): Likewise. * dbxread.c (dbx_free_symfile_info): Likewise. (do_free_bincl_list_cleanup): Likewise. * disasm.c (hash_dis_line_entry): Likewise. (eq_dis_line_entry): Likewise. (dis_asm_print_address): Likewise. (fprintf_disasm): Likewise. (do_ui_file_delete): Likewise. * doublest.c (convert_floatformat_to_doublest): Likewise. * dummy-frame.c (pop_dummy_frame_bpt): Likewise. (dummy_frame_prev_register): Likewise. (dummy_frame_this_id): Likewise. * dwarf2-frame-tailcall.c (cache_hash): Likewise. (cache_eq): Likewise. (cache_find): Likewise. (tailcall_frame_this_id): Likewise. (dwarf2_tailcall_prev_register_first): Likewise. (tailcall_frame_prev_register): Likewise. (tailcall_frame_dealloc_cache): Likewise. (tailcall_frame_prev_arch): Likewise. * dwarf2-frame.c (dwarf2_frame_state_free): Likewise. (dwarf2_frame_set_init_reg): Likewise. (dwarf2_frame_init_reg): Likewise. (dwarf2_frame_set_signal_frame_p): Likewise. (dwarf2_frame_signal_frame_p): Likewise. (dwarf2_frame_set_adjust_regnum): Likewise. (dwarf2_frame_adjust_regnum): Likewise. (clear_pointer_cleanup): Likewise. (dwarf2_frame_cache): Likewise. (find_cie): Likewise. (dwarf2_frame_find_fde): Likewise. * dwarf2expr.c (dwarf_expr_address_type): Likewise. (free_dwarf_expr_context_cleanup): Likewise. * dwarf2loc.c (locexpr_find_frame_base_location): Likewise. (locexpr_get_frame_base): Likewise. (loclist_find_frame_base_location): Likewise. (loclist_get_frame_base): Likewise. (dwarf_expr_dwarf_call): Likewise. (dwarf_expr_get_base_type): Likewise. (dwarf_expr_push_dwarf_reg_entry_value): Likewise. (dwarf_expr_get_obj_addr): Likewise. (entry_data_value_coerce_ref): Likewise. (entry_data_value_copy_closure): Likewise. (entry_data_value_free_closure): Likewise. (get_frame_address_in_block_wrapper): Likewise. (dwarf2_evaluate_property): Likewise. (dwarf2_compile_property_to_c): Likewise. (needs_frame_read_addr_from_reg): Likewise. (needs_frame_get_reg_value): Likewise. (needs_frame_frame_base): Likewise. (needs_frame_frame_cfa): Likewise. (needs_frame_tls_address): Likewise. (needs_frame_dwarf_call): Likewise. (needs_dwarf_reg_entry_value): Likewise. (get_ax_pc): Likewise. (locexpr_read_variable): Likewise. (locexpr_read_variable_at_entry): Likewise. (locexpr_read_needs_frame): Likewise. (locexpr_describe_location): Likewise. (locexpr_tracepoint_var_ref): Likewise. (locexpr_generate_c_location): Likewise. (loclist_read_variable): Likewise. (loclist_read_variable_at_entry): Likewise. (loclist_describe_location): Likewise. (loclist_tracepoint_var_ref): Likewise. (loclist_generate_c_location): Likewise. * dwarf2read.c (line_header_hash_voidp): Likewise. (line_header_eq_voidp): Likewise. (dwarf2_has_info): Likewise. (dwarf2_get_section_info): Likewise. (locate_dwz_sections): Likewise. (hash_file_name_entry): Likewise. (eq_file_name_entry): Likewise. (delete_file_name_entry): Likewise. (dw2_setup): Likewise. (dw2_get_file_names_reader): Likewise. (dw2_find_pc_sect_compunit_symtab): Likewise. (hash_signatured_type): Likewise. (eq_signatured_type): Likewise. (add_signatured_type_cu_to_table): Likewise. (create_debug_types_hash_table): Likewise. (lookup_dwo_signatured_type): Likewise. (lookup_dwp_signatured_type): Likewise. (lookup_signatured_type): Likewise. (hash_type_unit_group): Likewise. (eq_type_unit_group): Likewise. (get_type_unit_group): Likewise. (process_psymtab_comp_unit_reader): Likewise. (sort_tu_by_abbrev_offset): Likewise. (process_skeletonless_type_unit): Likewise. (psymtabs_addrmap_cleanup): Likewise. (dwarf2_read_symtab): Likewise. (psymtab_to_symtab_1): Likewise. (die_hash): Likewise. (die_eq): Likewise. (load_full_comp_unit_reader): Likewise. (reset_die_in_process): Likewise. (free_cu_line_header): Likewise. (handle_DW_AT_stmt_list): Likewise. (hash_dwo_file): Likewise. (eq_dwo_file): Likewise. (hash_dwo_unit): Likewise. (eq_dwo_unit): Likewise. (create_dwo_cu_reader): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (lookup_dwo_unit_in_dwp): Likewise. (dwarf2_locate_dwo_sections): Likewise. (dwarf2_locate_common_dwp_sections): Likewise. (dwarf2_locate_v2_dwp_sections): Likewise. (hash_dwp_loaded_cutus): Likewise. (eq_dwp_loaded_cutus): Likewise. (lookup_dwo_cutu): Likewise. (abbrev_table_free_cleanup): Likewise. (dwarf2_free_abbrev_table): Likewise. (find_partial_die_in_comp_unit): Likewise. (free_line_header_voidp): Likewise. (follow_die_offset): Likewise. (follow_die_sig_1): Likewise. (free_heap_comp_unit): Likewise. (free_stack_comp_unit): Likewise. (dwarf2_free_objfile): Likewise. (per_cu_offset_and_type_hash): Likewise. (per_cu_offset_and_type_eq): Likewise. (get_die_type_at_offset): Likewise. (partial_die_hash): Likewise. (partial_die_eq): Likewise. (dwarf2_per_objfile_free): Likewise. (hash_strtab_entry): Likewise. (eq_strtab_entry): Likewise. (add_string): Likewise. (hash_symtab_entry): Likewise. (eq_symtab_entry): Likewise. (delete_symtab_entry): Likewise. (cleanup_mapped_symtab): Likewise. (add_indices_to_cpool): Likewise. (hash_psymtab_cu_index): Likewise. (eq_psymtab_cu_index): Likewise. (add_address_entry_worker): Likewise. (unlink_if_set): Likewise. (write_one_signatured_type): Likewise. (save_gdb_index_command): Likewise. * elfread.c (elf_symtab_read): Likewise. (elf_gnu_ifunc_cache_hash): Likewise. (elf_gnu_ifunc_cache_eq): Likewise. (elf_gnu_ifunc_record_cache): Likewise. (elf_gnu_ifunc_resolve_by_cache): Likewise. (elf_get_probes): Likewise. (probe_key_free): Likewise. * f-lang.c (builtin_f_type): Likewise. * frame-base.c (frame_base_append_sniffer): Likewise. (frame_base_set_default): Likewise. (frame_base_find_by_frame): Likewise. * frame-unwind.c (frame_unwind_prepend_unwinder): Likewise. (frame_unwind_append_unwinder): Likewise. (frame_unwind_find_by_frame): Likewise. * frame.c (frame_addr_hash): Likewise. (frame_addr_hash_eq): Likewise. (frame_stash_find): Likewise. (do_frame_register_read): Likewise. (unwind_to_current_frame): Likewise. (frame_cleanup_after_sniffer): Likewise. * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise. * frv-tdep.c (frv_frame_unwind_cache): Likewise. * ft32-tdep.c (ft32_frame_cache): Likewise. * gcore.c (do_bfd_delete_cleanup): Likewise. (gcore_create_callback): Likewise. * gdb_bfd.c (hash_bfd): Likewise. (eq_bfd): Likewise. (gdb_bfd_open): Likewise. (free_one_bfd_section): Likewise. (gdb_bfd_ref): Likewise. (gdb_bfd_unref): Likewise. (get_section_descriptor): Likewise. (gdb_bfd_map_section): Likewise. (gdb_bfd_crc): Likewise. (gdb_bfd_mark_parent): Likewise. (gdb_bfd_record_inclusion): Likewise. (gdb_bfd_requires_relocations): Likewise. (print_one_bfd): Likewise. * gdbtypes.c (type_pair_hash): Likewise. (type_pair_eq): Likewise. (builtin_type): Likewise. (objfile_type): Likewise. * gnu-v3-abi.c (vtable_ptrdiff_type): Likewise. (vtable_address_point_offset): Likewise. (gnuv3_get_vtable): Likewise. (hash_value_and_voffset): Likewise. (eq_value_and_voffset): Likewise. (compare_value_and_voffset): Likewise. (compute_vtable_size): Likewise. (gnuv3_get_typeid_type): Likewise. * go-lang.c (builtin_go_type): Likewise. * guile/scm-block.c (bkscm_hash_block_smob): Likewise. (bkscm_eq_block_smob): Likewise. (bkscm_objfile_block_map): Likewise. (bkscm_del_objfile_blocks): Likewise. * guile/scm-breakpoint.c (bpscm_build_bp_list): Likewise. * guile/scm-disasm.c (gdbscm_disasm_read_memory_worker): Likewise. (gdbscm_disasm_print_address): Likewise. * guile/scm-frame.c (frscm_hash_frame_smob): Likewise. (frscm_eq_frame_smob): Likewise. (frscm_inferior_frame_map): Likewise. (frscm_del_inferior_frames): Likewise. * guile/scm-gsmob.c (gdbscm_add_objfile_ref): Likewise. * guile/scm-objfile.c (ofscm_handle_objfile_deleted): Likewise. (ofscm_objfile_smob_from_objfile): Likewise. * guile/scm-ports.c (ioscm_write): Likewise. (ioscm_file_port_delete): Likewise. (ioscm_file_port_rewind): Likewise. (ioscm_file_port_put): Likewise. (ioscm_file_port_write): Likewise. * guile/scm-progspace.c (psscm_handle_pspace_deleted): Likewise. (psscm_pspace_smob_from_pspace): Likewise. * guile/scm-safe-call.c (scscm_recording_pre_unwind_handler): Likewise. (scscm_recording_unwind_handler): Likewise. (gdbscm_with_catch): Likewise. (scscm_call_0_body): Likewise. (scscm_call_1_body): Likewise. (scscm_call_2_body): Likewise. (scscm_call_3_body): Likewise. (scscm_call_4_body): Likewise. (scscm_apply_1_body): Likewise. (scscm_eval_scheme_string): Likewise. (gdbscm_safe_eval_string): Likewise. (scscm_source_scheme_script): Likewise. (gdbscm_safe_source_script): Likewise. * guile/scm-string.c (gdbscm_call_scm_to_stringn): Likewise. (gdbscm_call_scm_from_stringn): Likewise. * guile/scm-symbol.c (syscm_hash_symbol_smob): Likewise. (syscm_eq_symbol_smob): Likewise. (syscm_get_symbol_map): Likewise. (syscm_del_objfile_symbols): Likewise. * guile/scm-symtab.c (stscm_hash_symtab_smob): Likewise. (stscm_eq_symtab_smob): Likewise. (stscm_objfile_symtab_map): Likewise. (stscm_del_objfile_symtabs): Likewise. * guile/scm-type.c (tyscm_hash_type_smob): Likewise. (tyscm_eq_type_smob): Likewise. (tyscm_type_map): Likewise. (tyscm_copy_type_recursive): Likewise. (save_objfile_types): Likewise. * guile/scm-utils.c (extract_arg): Likewise. * h8300-tdep.c (h8300_frame_cache): Likewise. * hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind_cache): Likewise. * hppa-tdep.c (compare_unwind_entries): Likewise. (find_unwind_entry): Likewise. (hppa_frame_cache): Likewise. (hppa_stub_frame_unwind_cache): Likewise. * hppanbsd-tdep.c (hppanbsd_supply_gregset): Likewise. * hppaobsd-tdep.c (hppaobsd_supply_gregset): Likewise. (hppaobsd_supply_fpregset): Likewise. * i386-cygwin-tdep.c (core_process_module_section): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Likewise. * i386-tdep.c (i386_frame_cache): Likewise. (i386_epilogue_frame_cache): Likewise. (i386_sigtramp_frame_cache): Likewise. (i386_supply_gregset): Likewise. (i386_collect_gregset): Likewise. (i386_gdbarch_init): Likewise. * i386obsd-tdep.c (i386obsd_aout_supply_regset): Likewise. (i386obsd_trapframe_cache): Likewise. * i387-tdep.c (i387_supply_fsave): Likewise. (i387_collect_fsave): Likewise. (i387_supply_fxsave): Likewise. (i387_collect_fxsave): Likewise. (i387_supply_xsave): Likewise. (i387_collect_xsave): Likewise. * ia64-tdep.c (ia64_frame_cache): Likewise. (ia64_sigtramp_frame_cache): Likewise. * infcmd.c (attach_command_continuation): Likewise. (attach_command_continuation_free_args): Likewise. * inferior.c (restore_inferior): Likewise. (delete_thread_of_inferior): Likewise. * inflow.c (inflow_inferior_data_cleanup): Likewise. (get_inflow_inferior_data): Likewise. (inflow_inferior_exit): Likewise. * infrun.c (displaced_step_clear_cleanup): Likewise. (restore_current_uiout_cleanup): Likewise. (release_stop_context_cleanup): Likewise. (do_restore_infcall_suspend_state_cleanup): Likewise. (do_restore_infcall_control_state_cleanup): Likewise. (restore_inferior_ptid): Likewise. * inline-frame.c (block_starting_point_at): Likewise. * iq2000-tdep.c (iq2000_frame_cache): Likewise. * jit.c (get_jit_objfile_data): Likewise. (get_jit_program_space_data): Likewise. (jit_object_close_impl): Likewise. (jit_find_objf_with_entry_addr): Likewise. (jit_breakpoint_deleted): Likewise. (jit_unwind_reg_set_impl): Likewise. (jit_unwind_reg_get_impl): Likewise. (jit_dealloc_cache): Likewise. (jit_frame_sniffer): Likewise. (jit_frame_prev_register): Likewise. (jit_prepend_unwinder): Likewise. (jit_inferior_exit_hook): Likewise. (free_objfile_data): Likewise. * jv-lang.c (jv_per_objfile_free): Likewise. (get_dynamics_objfile): Likewise. (get_java_class_symtab): Likewise. (builtin_java_type): Likewise. * language.c (language_string_char_type): Likewise. (language_bool_type): Likewise. (language_lookup_primitive_type): Likewise. (language_lookup_primitive_type_as_symbol): Likewise. * linespec.c (hash_address_entry): Likewise. (eq_address_entry): Likewise. (iterate_inline_only): Likewise. (iterate_name_matcher): Likewise. (decode_line_2_compare_items): Likewise. (collect_one_symbol): Likewise. (compare_symbols): Likewise. (compare_msymbols): Likewise. (add_symtabs_to_list): Likewise. (collect_symbols): Likewise. (compare_msyms): Likewise. (add_minsym): Likewise. (cleanup_linespec_result): Likewise. * linux-fork.c (inferior_call_waitpid_cleanup): Likewise. * linux-nat.c (delete_lwp_cleanup): Likewise. (count_events_callback): Likewise. (select_event_lwp_callback): Likewise. (resume_stopped_resumed_lwps): Likewise. * linux-tdep.c (get_linux_gdbarch_data): Likewise. (invalidate_linux_cache_inf): Likewise. (get_linux_inferior_data): Likewise. (linux_find_memory_regions_thunk): Likewise. (linux_make_mappings_callback): Likewise. (linux_corefile_thread_callback): Likewise. (find_mapping_size): Likewise. * linux-thread-db.c (find_new_threads_callback): Likewise. * lm32-tdep.c (lm32_frame_cache): Likewise. * m2-lang.c (builtin_m2_type): Likewise. * m32c-tdep.c (m32c_analyze_frame_prologue): Likewise. * m32r-linux-tdep.c (m32r_linux_sigtramp_frame_cache): Likewise. (m32r_linux_supply_gregset): Likewise. (m32r_linux_collect_gregset): Likewise. * m32r-tdep.c (m32r_frame_unwind_cache): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * m68k-tdep.c (m68k_frame_cache): Likewise. * m68kbsd-tdep.c (m68kbsd_supply_fpregset): Likewise. (m68kbsd_supply_gregset): Likewise. * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise. * m88k-tdep.c (m88k_frame_cache): Likewise. (m88k_supply_gregset): Likewise. gdb/gdbserver/ChangeLog: * dll.c (match_dll): Add cast(s). (unloaded_dll): Likewise. * linux-low.c (second_thread_of_pid_p): Likewise. (delete_lwp_callback): Likewise. (count_events_callback): Likewise. (select_event_lwp_callback): Likewise. (linux_set_resume_request): Likewise. * server.c (accumulate_file_name_length): Likewise. (emit_dll_description): Likewise. (handle_qxfer_threads_worker): Likewise. (visit_actioned_threads): Likewise. * thread-db.c (any_thread_of): Likewise. * tracepoint.c (same_process_p): Likewise. (match_blocktype): Likewise. (build_traceframe_info_xml): Likewise. gdb/testsuite/ChangeLog: * gdb.gdb/selftest.exp (do_steps_and_nexts): Adjust expected source line.
2015-09-25Add casts to memory allocation related callsSimon Marchi192-796/+1411
Most allocation functions (if not all) return a void* pointing to the allocated memory. In C++, we need to add an explicit cast when assigning the result to a pointer to another type (which is the case more often than not). The content of this patch is taken from Pedro's branch, from commit "(mostly) auto-generated patch to insert casts needed for C++". I validated that the changes make sense and manually reflowed the code to make it respect the coding style. I also found multiple places where I could use XNEW/XNEWVEC/XRESIZEVEC/etc. Thanks a lot to whoever did that automated script to insert casts, doing it completely by hand would have taken a ridiculous amount of time. Only files built on x86 with --enable-targets=all are modified. This means that all other -nat.c files are untouched and will have to be dealt with later by using appropiate compilers. Or maybe we can try to build them with a regular g++ just to know where to add casts, I don't know. I built-tested this with --enable-targets=all and reg-tested. Here's the changelog entry, which was not too bad to make despite the size, thanks to David Malcom's script. I fixed some bits by hand, but there might be some wrong parts left (hopefully not). gdb/ChangeLog: * aarch64-linux-tdep.c (aarch64_stap_parse_special_token): Add cast to allocation result assignment. * ada-exp.y (write_object_renaming): Likewise. (write_ambiguous_var): Likewise. (ada_nget_field_index): Likewise. (write_var_or_type): Likewise. * ada-lang.c (ada_decode_symbol): Likewise. (ada_value_assign): Likewise. (value_pointer): Likewise. (cache_symbol): Likewise. (add_nonlocal_symbols): Likewise. (ada_name_for_lookup): Likewise. (symbol_completion_add): Likewise. (ada_to_fixed_type_1): Likewise. (ada_get_next_arg): Likewise. (defns_collected): Likewise. * ada-lex.l (processId): Likewise. (processString): Likewise. * ada-tasks.c (read_known_tasks_array): Likewise. (read_known_tasks_list): Likewise. * ada-typeprint.c (decoded_type_name): Likewise. * addrmap.c (addrmap_mutable_create_fixed): Likewise. * amd64-tdep.c (amd64_push_arguments): Likewise. (amd64_displaced_step_copy_insn): Likewise. (amd64_classify_insn_at): Likewise. (amd64_relocate_instruction): Likewise. * amd64obsd-tdep.c (amd64obsd_sigtramp_p): Likewise. * arch-utils.c (simple_displaced_step_copy_insn): Likewise. (initialize_current_architecture): Likewise. * arm-linux-tdep.c (arm_stap_parse_special_token): Likewise. * arm-symbian-tdep.c (arm_symbian_osabi_sniffer): Likewise. * arm-tdep.c (arm_exidx_new_objfile): Likewise. (arm_push_dummy_call): Likewise. (extend_buffer_earlier): Likewise. (arm_adjust_breakpoint_address): Likewise. (arm_skip_stub): Likewise. * auto-load.c (filename_is_in_pattern): Likewise. (maybe_add_script_file): Likewise. (maybe_add_script_text): Likewise. (auto_load_objfile_script_1): Likewise. * auxv.c (ld_so_xfer_auxv): Likewise. * ax-general.c (new_agent_expr): Likewise. (grow_expr): Likewise. (ax_reg_mask): Likewise. * bcache.c (bcache_full): Likewise. * breakpoint.c (program_breakpoint_here_p): Likewise. * btrace.c (parse_xml_raw): Likewise. * build-id.c (build_id_to_debug_bfd): Likewise. * buildsym.c (end_symtab_with_blockvector): Likewise. * c-exp.y (string_exp): Likewise. (qualified_name): Likewise. (write_destructor_name): Likewise. (operator_stoken): Likewise. (parse_number): Likewise. (scan_macro_expansion): Likewise. (yylex): Likewise. (c_print_token): Likewise. * c-lang.c (c_get_string): Likewise. (emit_numeric_character): Likewise. * charset.c (wchar_iterate): Likewise. * cli/cli-cmds.c (complete_command): Likewise. (make_command): Likewise. * cli/cli-dump.c (restore_section_callback): Likewise. (restore_binary_file): Likewise. * cli/cli-interp.c (cli_interpreter_exec): Likewise. * cli/cli-script.c (execute_control_command): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * coff-pe-read.c (add_pe_forwarded_sym): Likewise. (read_pe_exported_syms): Likewise. * coffread.c (coff_read_struct_type): Likewise. (coff_read_enum_type): Likewise. * common/btrace-common.c (btrace_data_append): Likewise. * common/buffer.c (buffer_grow): Likewise. * common/filestuff.c (gdb_fopen_cloexec): Likewise. * common/format.c (parse_format_string): Likewise. * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): Likewise. * common/xml-utils.c (xml_escape_text): Likewise. * compile/compile-object-load.c (copy_sections): Likewise. (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * completer.c (filename_completer): Likewise. * corefile.c (read_memory_typed_address): Likewise. (write_memory_unsigned_integer): Likewise. (write_memory_signed_integer): Likewise. (complete_set_gnutarget): Likewise. * corelow.c (get_core_register_section): Likewise. * cp-name-parser.y (d_grab): Likewise. (allocate_info): Likewise. (cp_new_demangle_parse_info): Likewise. * cp-namespace.c (cp_scan_for_anonymous_namespaces): Likewise. (cp_lookup_symbol_in_namespace): Likewise. (lookup_namespace_scope): Likewise. (find_symbol_in_baseclass): Likewise. (cp_lookup_nested_symbol): Likewise. (cp_lookup_transparent_type_loop): Likewise. * cp-support.c (copy_string_to_obstack): Likewise. (make_symbol_overload_list): Likewise. (make_symbol_overload_list_namespace): Likewise. (make_symbol_overload_list_adl_namespace): Likewise. (first_component_command): Likewise. * cp-valprint.c (cp_print_value): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * d-exp.y (StringExp): Likewise. * d-namespace.c (d_lookup_symbol_in_module): Likewise. (lookup_module_scope): Likewise. (find_symbol_in_baseclass): Likewise. (d_lookup_nested_symbol): Likewise. * dbxread.c (find_stab_function_addr): Likewise. (read_dbx_symtab): Likewise. (dbx_end_psymtab): Likewise. (cp_set_block_scope): Likewise. * dcache.c (dcache_alloc): Likewise. * demangle.c (_initialize_demangler): Likewise. * dicos-tdep.c (dicos_load_module_p): Likewise. * dictionary.c (dict_create_hashed_expandable): Likewise. (dict_create_linear_expandable): Likewise. (expand_hashtable): Likewise. (add_symbol_linear_expandable): Likewise. * dwarf2-frame.c (add_cie): Likewise. (add_fde): Likewise. (dwarf2_build_frame_info): Likewise. * dwarf2expr.c (dwarf_expr_grow_stack): Likewise. (dwarf_expr_fetch_address): Likewise. (add_piece): Likewise. (execute_stack_op): Likewise. * dwarf2loc.c (chain_candidate): Likewise. (dwarf_entry_parameter_to_value): Likewise. (read_pieced_value): Likewise. (write_pieced_value): Likewise. * dwarf2read.c (dwarf2_read_section): Likewise. (add_type_unit): Likewise. (read_comp_units_from_section): Likewise. (fixup_go_packaging): Likewise. (dwarf2_compute_name): Likewise. (dwarf2_physname): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (read_func_scope): Likewise. (read_call_site_scope): Likewise. (dwarf2_attach_fields_to_type): Likewise. (process_structure_scope): Likewise. (mark_common_block_symbol_computed): Likewise. (read_common_block): Likewise. (abbrev_table_read_table): Likewise. (guess_partial_die_structure_name): Likewise. (fixup_partial_die): Likewise. (add_file_name): Likewise. (dwarf2_const_value_data): Likewise. (dwarf2_const_value_attr): Likewise. (build_error_marker_type): Likewise. (guess_full_die_structure_name): Likewise. (anonymous_struct_prefix): Likewise. (typename_concat): Likewise. (dwarf2_canonicalize_name): Likewise. (dwarf2_name): Likewise. (write_constant_as_bytes): Likewise. (dwarf2_fetch_constant_bytes): Likewise. (copy_string): Likewise. (parse_macro_definition): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_rel_plt_read): Likewise. (elf_gnu_ifunc_resolve_by_cache): Likewise. (elf_gnu_ifunc_resolve_by_got): Likewise. (elf_read_minimal_symbols): Likewise. (elf_gnu_ifunc_record_cache): Likewise. * event-top.c (top_level_prompt): Likewise. (command_line_handler): Likewise. * exec.c (resize_section_table): Likewise. * expprint.c (print_subexp_standard): Likewise. * fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise. * findcmd.c (parse_find_args): Likewise. * findvar.c (address_from_register): Likewise. * frame.c (get_prev_frame_always): Likewise. * gdb_bfd.c (gdb_bfd_ref): Likewise. (get_section_descriptor): Likewise. * gdb_obstack.c (obconcat): Likewise. (obstack_strdup): Likewise. * gdbtypes.c (lookup_function_type_with_arguments): Likewise. (create_set_type): Likewise. (lookup_unsigned_typename): Likewise. (lookup_signed_typename): Likewise. (resolve_dynamic_union): Likewise. (resolve_dynamic_struct): Likewise. (add_dyn_prop): Likewise. (copy_dynamic_prop_list): Likewise. (arch_flags_type): Likewise. (append_composite_type_field_raw): Likewise. * gdbtypes.h (INIT_FUNC_SPECIFIC): Likewise. * gnu-v3-abi.c (gnuv3_rtti_type): Likewise. * go-exp.y (string_exp): Likewise. * go-lang.c (go_demangle): Likewise. * guile/guile.c (compute_scheme_string): Likewise. * guile/scm-cmd.c (gdbscm_parse_command_name): Likewise. (gdbscm_canonicalize_command_name): Likewise. * guile/scm-ports.c (ioscm_init_stdio_buffers): Likewise. (ioscm_init_memory_port): Likewise. (ioscm_reinit_memory_port): Likewise. * guile/scm-utils.c (gdbscm_gc_xstrdup): Likewise. (gdbscm_gc_dup_argv): Likewise. * h8300-tdep.c (h8300_push_dummy_call): Likewise. * hppa-tdep.c (internalize_unwinds): Likewise. (read_unwind_info): Likewise. * i386-cygwin-tdep.c (core_process_module_section): Likewise. (windows_core_xfer_shared_libraries): Likewise. * i386-tdep.c (i386_displaced_step_copy_insn): Likewise. (i386_stap_parse_special_token_triplet): Likewise. (i386_stap_parse_special_token_three_arg_disp): Likewise. * i386obsd-tdep.c (i386obsd_sigtramp_p): Likewise. * inf-child.c (inf_child_fileio_readlink): Likewise. * inf-ptrace.c (inf_ptrace_fetch_register): Likewise. (inf_ptrace_store_register): Likewise. * infrun.c (follow_exec): Likewise. (displaced_step_prepare_throw): Likewise. (save_stop_context): Likewise. (save_infcall_suspend_state): Likewise. * jit.c (jit_read_descriptor): Likewise. (jit_read_code_entry): Likewise. (jit_symtab_line_mapping_add_impl): Likewise. (finalize_symtab): Likewise. (jit_unwind_reg_get_impl): Likewise. * jv-exp.y (QualifiedName): Likewise. * jv-lang.c (get_java_utf8_name): Likewise. (type_from_class): Likewise. (java_demangle_type_signature): Likewise. (java_class_name_from_physname): Likewise. * jv-typeprint.c (java_type_print_base): Likewise. * jv-valprint.c (java_value_print): Likewise. * language.c (add_language): Likewise. * linespec.c (add_sal_to_sals_basic): Likewise. (add_sal_to_sals): Likewise. (decode_objc): Likewise. (find_linespec_symbols): Likewise. * linux-fork.c (fork_save_infrun_state): Likewise. * linux-nat.c (linux_nat_detach): Likewise. (linux_nat_fileio_readlink): Likewise. * linux-record.c (record_linux_sockaddr): Likewise. (record_linux_msghdr): Likewise. (Do): Likewise. * linux-tdep.c (linux_core_info_proc_mappings): Likewise. (linux_collect_regset_section_cb): Likewise. (linux_get_siginfo_data): Likewise. * linux-thread-db.c (try_thread_db_load_from_pdir_1): Likewise. (try_thread_db_load_from_dir): Likewise. (thread_db_load_search): Likewise. (info_auto_load_libthread_db): Likewise. * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise. (m32c_m16c_pointer_to_address): Likewise. * m68hc11-tdep.c (m68hc11_pseudo_register_write): Likewise. * m68k-tdep.c (m68k_get_longjmp_target): Likewise. * machoread.c (macho_check_dsym): Likewise. * macroexp.c (resize_buffer): Likewise. (gather_arguments): Likewise. (maybe_expand): Likewise. * macrotab.c (new_macro_key): Likewise. (new_source_file): Likewise. (new_macro_definition): Likewise. * mdebugread.c (parse_symbol): Likewise. (parse_type): Likewise. (parse_partial_symbols): Likewise. (psymtab_to_symtab_1): Likewise. * mem-break.c (default_memory_insert_breakpoint): Likewise. * mi/mi-cmd-break.c (mi_argv_to_format): Likewise. * mi/mi-main.c (mi_cmd_data_read_memory): Likewise. (mi_cmd_data_read_memory_bytes): Likewise. (mi_cmd_data_write_memory_bytes): Likewise. (mi_cmd_trace_frame_collected): Likewise. * mi/mi-parse.c (mi_parse_argv): Likewise. (mi_parse): Likewise. * minidebug.c (lzma_open): Likewise. (lzma_pread): Likewise. * mips-tdep.c (mips_read_fp_register_single): Likewise. (mips_print_fp_register): Likewise. * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Likewise. * mipsread.c (read_alphacoff_dynamic_symtab): Likewise. * mt-tdep.c (mt_register_name): Likewise. (mt_registers_info): Likewise. (mt_push_dummy_call): Likewise. * namespace.c (add_using_directive): Likewise. * nat/linux-btrace.c (perf_event_read): Likewise. (linux_enable_bts): Likewise. * nat/linux-osdata.c (linux_common_core_of_thread): Likewise. * nat/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Likewise. * nto-tdep.c (nto_find_and_open_solib): Likewise. (nto_parse_redirection): Likewise. * objc-lang.c (objc_demangle): Likewise. (find_methods): Likewise. * objfiles.c (get_objfile_bfd_data): Likewise. (set_objfile_main_name): Likewise. (allocate_objfile): Likewise. (objfile_relocate): Likewise. (update_section_map): Likewise. * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise. * p-exp.y (exp): Likewise. (yylex): Likewise. * p-valprint.c (pascal_object_print_value): Likewise. * parse.c (initialize_expout): Likewise. (mark_completion_tag): Likewise. (copy_name): Likewise. (parse_float): Likewise. (type_stack_reserve): Likewise. * ppc-linux-tdep.c (ppc_stap_parse_special_token): Likewise. (ppu2spu_prev_register): Likewise. * ppc-ravenscar-thread.c (supply_register_at_address): Likewise. * printcmd.c (printf_wide_c_string): Likewise. (printf_pointer): Likewise. * probe.c (parse_probes): Likewise. * python/py-cmd.c (gdbpy_parse_command_name): Likewise. (cmdpy_init): Likewise. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Likewise. * python/py-symtab.c (set_sal): Likewise. * python/py-unwind.c (pyuw_sniffer): Likewise. * python/python.c (python_interactive_command): Likewise. (compute_python_string): Likewise. * ravenscar-thread.c (get_running_thread_id): Likewise. * record-full.c (record_full_exec_insn): Likewise. (record_full_core_open_1): Likewise. * regcache.c (regcache_raw_read_signed): Likewise. (regcache_raw_read_unsigned): Likewise. (regcache_cooked_read_signed): Likewise. (regcache_cooked_read_unsigned): Likewise. * remote-fileio.c (remote_fileio_func_open): Likewise. (remote_fileio_func_rename): Likewise. (remote_fileio_func_unlink): Likewise. (remote_fileio_func_stat): Likewise. (remote_fileio_func_system): Likewise. * remote-mips.c (mips_xfer_memory): Likewise. (mips_load_srec): Likewise. (pmon_end_download): Likewise. * remote.c (new_remote_state): Likewise. (map_regcache_remote_table): Likewise. (remote_register_number_and_offset): Likewise. (init_remote_state): Likewise. (get_memory_packet_size): Likewise. (remote_pass_signals): Likewise. (remote_program_signals): Likewise. (remote_start_remote): Likewise. (remote_check_symbols): Likewise. (remote_query_supported): Likewise. (extended_remote_attach): Likewise. (process_g_packet): Likewise. (store_registers_using_G): Likewise. (putpkt_binary): Likewise. (read_frame): Likewise. (compare_sections_command): Likewise. (remote_hostio_pread): Likewise. (remote_hostio_readlink): Likewise. (remote_file_put): Likewise. (remote_file_get): Likewise. (remote_pid_to_exec_file): Likewise. (_initialize_remote): Likewise. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. * rs6000-tdep.c (ppc_displaced_step_copy_insn): Likewise. (bfd_uses_spe_extensions): Likewise. * s390-linux-tdep.c (s390_displaced_step_copy_insn): Likewise. * score-tdep.c (score7_malloc_and_get_memblock): Likewise. * solib-dsbt.c (decode_loadmap): Likewise. (fetch_loadmap): Likewise. (scan_dyntag): Likewise. (enable_break): Likewise. (dsbt_relocate_main_executable): Likewise. * solib-frv.c (fetch_loadmap): Likewise. (enable_break2): Likewise. (frv_relocate_main_executable): Likewise. * solib-spu.c (spu_relocate_main_executable): Likewise. (spu_bfd_open): Likewise. * solib-svr4.c (lm_info_read): Likewise. (read_program_header): Likewise. (find_program_interpreter): Likewise. (scan_dyntag): Likewise. (elf_locate_base): Likewise. (open_symbol_file_object): Likewise. (read_program_headers_from_bfd): Likewise. (svr4_relocate_main_executable): Likewise. * solib-target.c (solib_target_relocate_section_addresses): Likewise. * solib.c (solib_find_1): Likewise. (exec_file_find): Likewise. (solib_find): Likewise. * source.c (openp): Likewise. (print_source_lines_base): Likewise. (forward_search_command): Likewise. * sparc-ravenscar-thread.c (supply_register_at_address): Likewise. * spu-tdep.c (spu2ppu_prev_register): Likewise. (spu_get_overlay_table): Likewise. * stabsread.c (patch_block_stabs): Likewise. (define_symbol): Likewise. (again:): Likewise. (read_member_functions): Likewise. (read_one_struct_field): Likewise. (read_enum_type): Likewise. (common_block_start): Likewise. * stack.c (read_frame_arg): Likewise. (backtrace_command): Likewise. * stap-probe.c (stap_parse_register_operand): Likewise. * symfile.c (syms_from_objfile_1): Likewise. (find_separate_debug_file): Likewise. (load_command): Likewise. (load_progress): Likewise. (load_section_callback): Likewise. (reread_symbols): Likewise. (add_filename_language): Likewise. (allocate_compunit_symtab): Likewise. (read_target_long_array): Likewise. (simple_read_overlay_table): Likewise. * symtab.c (symbol_set_names): Likewise. (resize_symbol_cache): Likewise. (rbreak_command): Likewise. (completion_list_add_name): Likewise. (completion_list_objc_symbol): Likewise. (add_filename_to_list): Likewise. * target-descriptions.c (maint_print_c_tdesc_cmd): Likewise. * target-memory.c (target_write_memory_blocks): Likewise. * target.c (target_read_string): Likewise. (read_whatever_is_readable): Likewise. (target_read_alloc_1): Likewise. (simple_search_memory): Likewise. (target_fileio_read_alloc_1): Likewise. * tilegx-tdep.c (tilegx_push_dummy_call): Likewise. * top.c (command_line_input): Likewise. * tracefile-tfile.c (tfile_fetch_registers): Likewise. * tracefile.c (tracefile_fetch_registers): Likewise. * tracepoint.c (add_memrange): Likewise. (init_collection_list): Likewise. (add_aexpr): Likewise. (trace_dump_actions): Likewise. (parse_trace_status): Likewise. (parse_tracepoint_definition): Likewise. (parse_tsv_definition): Likewise. (parse_static_tracepoint_marker_definition): Likewise. * tui/tui-file.c (tui_sfileopen): Likewise. (tui_file_adjust_strbuf): Likewise. * tui/tui-io.c (tui_expand_tabs): Likewise. * tui/tui-source.c (tui_set_source_content): Likewise. * typeprint.c (find_global_typedef): Likewise. * ui-file.c (do_ui_file_xstrdup): Likewise. (ui_file_obsavestring): Likewise. (mem_file_write): Likewise. * utils.c (make_hex_string): Likewise. (get_regcomp_error): Likewise. (puts_filtered_tabular): Likewise. (gdb_realpath_keepfile): Likewise. (ldirname): Likewise. (gdb_bfd_errmsg): Likewise. (substitute_path_component): Likewise. * valops.c (search_struct_method): Likewise. (find_oload_champ_namespace_loop): Likewise. * valprint.c (print_decimal_chars): Likewise. (read_string): Likewise. (generic_emit_char): Likewise. * varobj.c (varobj_delete): Likewise. (varobj_value_get_print_value): Likewise. * vaxobsd-tdep.c (vaxobsd_sigtramp_sniffer): Likewise. * windows-tdep.c (display_one_tib): Likewise. * xcoffread.c (read_xcoff_symtab): Likewise. (process_xcoff_symbol): Likewise. (swap_sym): Likewise. (scan_xcoff_symtab): Likewise. (xcoff_initial_scan): Likewise. * xml-support.c (gdb_xml_end_element): Likewise. (xml_process_xincludes): Likewise. (xml_fetch_content_from_file): Likewise. * xml-syscall.c (xml_list_of_syscalls): Likewise. * xstormy16-tdep.c (xstormy16_push_dummy_call): Likewise. gdb/gdbserver/ChangeLog: * ax.c (gdb_parse_agent_expr): Add cast to allocation result assignment. (gdb_unparse_agent_expr): Likewise. * hostio.c (require_data): Likewise. (handle_pread): Likewise. * linux-low.c (disable_regset): Likewise. (fetch_register): Likewise. (store_register): Likewise. (get_dynamic): Likewise. (linux_qxfer_libraries_svr4): Likewise. * mem-break.c (delete_fast_tracepoint_jump): Likewise. (set_fast_tracepoint_jump): Likewise. (uninsert_fast_tracepoint_jumps_at): Likewise. (reinsert_fast_tracepoint_jumps_at): Likewise. (validate_inserted_breakpoint): Likewise. (clone_agent_expr): Likewise. * regcache.c (init_register_cache): Likewise. * remote-utils.c (putpkt_binary_1): Likewise. (decode_M_packet): Likewise. (decode_X_packet): Likewise. (look_up_one_symbol): Likewise. (relocate_instruction): Likewise. (monitor_output): Likewise. * server.c (handle_search_memory): Likewise. (handle_qxfer_exec_file): Likewise. (handle_qxfer_libraries): Likewise. (handle_qxfer): Likewise. (handle_query): Likewise. (handle_v_cont): Likewise. (handle_v_run): Likewise. (captured_main): Likewise. * target.c (write_inferior_memory): Likewise. * thread-db.c (try_thread_db_load_from_dir): Likewise. * tracepoint.c (init_trace_buffer): Likewise. (add_tracepoint_action): Likewise. (add_traceframe): Likewise. (add_traceframe_block): Likewise. (cmd_qtdpsrc): Likewise. (cmd_qtdv): Likewise. (cmd_qtstatus): Likewise. (response_source): Likewise. (response_tsv): Likewise. (cmd_qtnotes): Likewise. (gdb_collect): Likewise. (initialize_tracepoint): Likewise.
2015-09-24Generalize enum regexp in gdb.cp/classes.exp.Sandra Loosemore2-1/+6
2015-09-24 Sandra Loosemore <sandra@codesourcery.com> gdb/testsuite/ * gdb.cp/classes.exp (test_enums): Generalize regexp to allow short or char as base type.
2015-09-24[FT32] Implement pointer to address conversion method.jamesbowman3-2/+104
FT32 is a Harvard architecture with two address spaces -- RAM and flash. The patch properly implements the pointer to address conversion method. There are some other small fixes to handle address spaces. gdb/ * ft32-tdep.c (ft32_register_type): Return gdbarch_tdep (gdbarch)->pc_type instead of builtin_func_ptr. (ft32_pointer_to_address): New function. (ft32_address_class_type_flags): New function. (ft32_address_class_type_flags_to_name): New function. (ft32_address_class_name_to_type_flags): New function. (ft32_gdbarch_init): Set tdep->pc_type. Call set_gdbarch_pointer_to_address, set_gdbarch_address_class_type_flags set_gdbarch_address_class_name_to_type_flags, and set_gdbarch_address_class_type_flags_to_name. * ft32-tdep.h (struct gdbarch_tdep) <pc_type>: New field.
2015-09-23Allow any size enum in gdb.cp/var-tag.exp.Sandra Loosemore2-1/+6
2015-09-23 Sandra Loosemore <sandra@codesourcery.com> gdb/testsuite/ * gdb.cp/var-tag.exp (do_global_tests): Generalize opt_underlying to allow any size enum.
2015-09-23[Ada] Fix handling of array renamingsPierre-Marie de Rodat6-4/+112
Compilers can materialize renamings of arrays (or of accesses to arrays) in Ada into variables whose types are references to the actual array types. Before this change, trying to use such an array renaming yielded an error in GDB: (gdb) print my_array(1) cannot subscript or call a record (gdb) print my_array_ptr(1) cannot subscript or call something of type `(null)' This behavior comes from bad handling for array renamings, in particular the OP_FUNCALL expression operator handling from ada-lang.c (ada_evaluate_subexp): in one place we turn the reference into a pointer, but the code that follows expect the value to be an array. This patch fixes how we handle references in call/subscript evaluation so that we turn these references into the actual array values instead of pointers to them. gdb/ChangeLog: * ada-lang.c (ada_evaluate_subexp) <OP_FUNCALL>: When the input value is a reference, actually dereference it in order to get the underlying value. gdb/testsuite/ChangeLog: * gdb.ada/array_ptr_renaming.exp: New testcase. * gdb.ada/array_ptr_renaming/foo.adb: New file. * gdb.ada/array_ptr_renaming/pack.ads: New file. Tested on x86_64-linux, no regression.
2015-09-22doc: Fix substitute-path exampleSimon Marchi2-2/+7
Found by Marc Khouzam. gdb/doc/ChangeLog: * gdb.texinfo (Specifying Source Directories): Fix substitute-path example.
2015-09-22stap-probe: Remove unnecessary castSimon Marchi2-1/+5
ret->args_u.text is const char *, probe_args is const char *, so no cast is needed. Found while doing cxx-conversion stuff, since it wouldn't build in C++. gdb/ChangeLog: * stap-probe.c (handle_stap_probe): Remove unnecessary cast.
2015-09-21Add two missing constsSimon Marchi3-2/+7
Two missing consts, found while doing cxx-conversion work. We end up with a char*, even though we pass a const char* to strstr. I am pushing this as obvious. gdb/ChangeLog: * cli/cli-setshow.c (cmd_show_list): Constify a variable. * linespec.c (linespec_lexer_lex_string): Same.
2015-09-21Add NEWS entry for fast tracepoint support on aarch64-linuxPierre Langlois2-0/+8
Here is a NEWS entry for this series: gdb/ChangeLog: * NEWS: Mention support for fast tracepoints on aarch64-linux.
2015-09-21Add a test case for fast tracepoints' locking mechanismPierre Langlois3-0/+199
When installing a fast tracepoint, we create a jump pad with a spin-lock. This way, only one thread can collect a given tracepoint at any time. This test case checks that this lock actually works as expected. This test works by creating a function which overrides the in-process agent library's gdb_collect function. On start up, GDBserver will ask GDB with the 'qSymbol' packet about symbols present in the inferior. GDB will reply with the gdb_agent_gdb_collect function from the test case instead of the one from the agent. gdb/testsuite/ChangeLog: * gdb.trace/ftrace-lock.c: New file. * gdb.trace/ftrace-lock.exp: New file.
2015-09-21Add a gdb.trace test for instruction relocationPierre Langlois3-0/+627
This test case makes sure that relocating PC relative instructions does not change their behaviors. All PC relative AArch64 instructions are covered. While call and jump (32 bit relative) instructions are covered on x86. The test case creates a static array of function pointers for each supported architecture. Each function in this array tests a specific instruction using inline assembly. They all need to contain a symbol in the form of 'set_point\[0-9\]+' and finish by either calling pass or fail. The number of 'set_pointN' needs to go from 0 to (ARRAY_SIZE - 1). The test will: - look up the number of function pointers in the static array. - set fast tracepoints on each 'set_point\[0-9\]+' symbol, one in each functions from 0 to (ARRAY_SIZE - 1). - run the trace experiment and make sure the pass function is called for every function. gdb/testsuite/ChangeLog: * gdb.arch/insn-reloc.c: New file. * gdb.arch/ftrace-insn-reloc.exp: New file.
2015-09-21Enable fast tracepoint testsPierre Langlois11-1/+36
gdb/testsuite/ChangeLog: * gdb.trace/change-loc.h (func4) [__aarch64__]: Add a nop instruction. * gdb.trace/pendshr1.c (pendfunc): Likewise. * gdb.trace/pendshr2.c (pendfunc2): Likewise. * gdb.trace/range-stepping.c: Likewise. * gdb.trace/trace-break.c: Likewise. * gdb.trace/trace-mt.c (thread_function): Likewise. * gdb.trace/ftrace.c (marker): Likewise. * gdb.trace/trace-condition.c (marker): Likewise. * gdb.trace/ftrace.exp: Enable ftrace test if is_aarch64_target. * gdb.trace/trace-condition.exp: Set pcreg to "\$pc" if is_aarch64_target.
2015-09-21Implement target_emit_opsPierre Langlois2-14/+1300
This patch implements compiling agent expressions to native code for AArch64. This allows us to compile conditions set on fast tracepoints. The compiled function has the following prologue: High *------------------------------------------------------* | LR | | FP | <- FP | x1 (ULONGEST *value) | | x0 (unsigned char *regs) | Low *------------------------------------------------------* We save the function's argument on the stack as well as the return address and the frame pointer. We then set the current frame pointer to point to the previous one. The generated code for the expression will freely update the stack pointer so we use the frame pointer to refer to `*value' and `*regs'. `*value' needs to be accessed in the epilogue of the function, in order to set it to whatever is on top of the stack. `*regs' needs to be passed down to the `gdb_agent_get_raw_reg' function with the `reg' operation. gdb/gdbserver/ChangeLog: * linux-aarch64-low-.c: Include ax.h and tracepoint.h. (enum aarch64_opcodes) <RET>, <SUBS>, <AND>, <ORR>, <ORN>, <EOR>, <LSLV>, <LSRV>, <ASRV>, <SBFM>, <UBFM>, <CSINC>, <MUL>, <NOP>: New. (enum aarch64_condition_codes): New enum. (w0): New static global. (fp): Likewise. (lr): Likewise. (struct aarch64_memory_operand) <type>: New MEMORY_OPERAND_POSTINDEX type. (postindex_memory_operand): New helper function. (emit_ret): New function. (emit_load_store_pair): New function, factored out of emit_stp with support for MEMORY_OPERAND_POSTINDEX. (emit_stp): Rewrite using emit_load_store_pair. (emit_ldp): New function. (emit_load_store): Likewise. (emit_ldr): Mention post-index instruction in comment. (emit_ldrh): New function. (emit_ldrb): New function. (emit_ldrsw): Mention post-index instruction in comment. (emit_str): Likewise. (emit_subs): New function. (emit_cmp): Likewise. (emit_and): Likewise. (emit_orr): Likewise. (emit_orn): Likewise. (emit_eor): Likewise. (emit_mvn): Likewise. (emit_lslv): Likewise. (emit_lsrv): Likewise. (emit_asrv): Likewise. (emit_mul): Likewise. (emit_sbfm): Likewise. (emit_sbfx): Likewise. (emit_ubfm): Likewise. (emit_ubfx): Likewise. (emit_csinc): Likewise. (emit_cset): Likewise. (emit_nop): Likewise. (emit_ops_insns): New helper function. (emit_pop): Likewise. (emit_push): Likewise. (aarch64_emit_prologue): New function. (aarch64_emit_epilogue): Likewise. (aarch64_emit_add): Likewise. (aarch64_emit_sub): Likewise. (aarch64_emit_mul): Likewise. (aarch64_emit_lsh): Likewise. (aarch64_emit_rsh_signed): Likewise. (aarch64_emit_rsh_unsigned): Likewise. (aarch64_emit_ext): Likewise. (aarch64_emit_log_not): Likewise. (aarch64_emit_bit_and): Likewise. (aarch64_emit_bit_or): Likewise. (aarch64_emit_bit_xor): Likewise. (aarch64_emit_bit_not): Likewise. (aarch64_emit_equal): Likewise. (aarch64_emit_less_signed): Likewise. (aarch64_emit_less_unsigned): Likewise. (aarch64_emit_ref): Likewise. (aarch64_emit_if_goto): Likewise. (aarch64_emit_goto): Likewise. (aarch64_write_goto_address): Likewise. (aarch64_emit_const): Likewise. (aarch64_emit_call): Likewise. (aarch64_emit_reg): Likewise. (aarch64_emit_pop): Likewise. (aarch64_emit_stack_flush): Likewise. (aarch64_emit_zero_ext): Likewise. (aarch64_emit_swap): Likewise. (aarch64_emit_stack_adjust): Likewise. (aarch64_emit_int_call_1): Likewise. (aarch64_emit_void_call_2): Likewise. (aarch64_emit_eq_goto): Likewise. (aarch64_emit_ne_goto): Likewise. (aarch64_emit_lt_goto): Likewise. (aarch64_emit_le_goto): Likewise. (aarch64_emit_gt_goto): Likewise. (aarch64_emit_ge_got): Likewise. (aarch64_emit_ops_impl): New static global variable. (aarch64_emit_ops): New target function, return &aarch64_emit_ops_impl. (struct linux_target_ops): Install it.
2015-09-21Add support for fast tracepointsPierre Langlois5-3/+1689
This patch adds support for fast tracepoints for aarch64-linux. With this implementation, a tracepoint can only be placed in a +/- 128MB range of the jump pad. This is due to the unconditional branch instruction being limited to a (26 bit << 2) offset from the current PC. Three target operations are implemented: - target_install_fast_tracepoint_jump_pad Building the jump pad the biggest change of this patch. We need to add functions to emit all instructions needed to save and restore the current state when the tracepoint is hit. As well as implementing a lock and creating a collecting_t object identifying the current thread. Steps performed by the jump pad: * Save the current state on the stack. * Push a collecting_t object on the stack. We read the special tpidr_el0 system register to get the thread ID. * Spin-lock on the shared memory location of all tracing threads. We write the address of our collecting_t object there once we have the lock. * Call gdb_collect. * Release the lock. * Restore the state. * Execute the replaced instruction which will have been relocated. * Jump back to the program. - target_get_thread_area As implemented in ps_get_thread_area, target_get_thread_area uses ptrace to fetch the NT_ARM_TLS register. At the architecture level, NT_ARM_TLS represents the tpidr_el0 system register. So this ptrace call (if lwpid is the current thread): ~~~ ptrace (PTRACE_GETREGSET, lwpid, NT_ARM_TLS, &iovec); ~~~ Is equivalent to the following instruction: ~~~ msr x0, tpidr_el0 ~~~ This instruction is used when creating the collecting_t object that GDBserver can read to know if a given thread is currently tracing. So target_get_thread_area must get the same thread IDs as what the jump pad writes into its collecting_t object. - target_get_min_fast_tracepoint_insn_len This just returns 4. gdb/gdbserver/ChangeLog: * Makefile.in (linux-aarch64-ipa.o, aarch64-ipa.o): New rules. * configure.srv (aarch64*-*-linux*): Add linux-aarch64-ipa.o and aarch64-ipa.o. * linux-aarch64-ipa.c: New file. * linux-aarch64-low.c: Include arch/aarch64-insn.h, inttypes.h and endian.h. (aarch64_get_thread_area): New target method. (extract_signed_bitfield): New helper function. (aarch64_decode_ldr_literal): New function. (enum aarch64_opcodes): New enum. (struct aarch64_register): New struct. (struct aarch64_operand): New struct. (x0): New static global. (x1): Likewise. (x2): Likewise. (x3): Likewise. (x4): Likewise. (w2): Likewise. (ip0): Likewise. (sp): Likewise. (xzr): Likewise. (aarch64_register): New helper function. (register_operand): Likewise. (immediate_operand): Likewise. (struct aarch64_memory_operand): New struct. (offset_memory_operand): New helper function. (preindex_memory_operand): Likewise. (enum aarch64_system_control_registers): New enum. (ENCODE): New macro. (emit_insn): New helper function. (emit_b): New function. (emit_bcond): Likewise. (emit_cb): Likewise. (emit_tb): Likewise. (emit_blr): Likewise. (emit_stp): Likewise. (emit_ldp_q_offset): Likewise. (emit_stp_q_offset): Likewise. (emit_load_store): Likewise. (emit_ldr): Likewise. (emit_ldrsw): Likewise. (emit_str): Likewise. (emit_ldaxr): Likewise. (emit_stxr): Likewise. (emit_stlr): Likewise. (emit_data_processing_reg): Likewise. (emit_data_processing): Likewise. (emit_add): Likewise. (emit_sub): Likewise. (emit_mov): Likewise. (emit_movk): Likewise. (emit_mov_addr): Likewise. (emit_mrs): Likewise. (emit_msr): Likewise. (emit_sevl): Likewise. (emit_wfe): Likewise. (append_insns): Likewise. (can_encode_int32_in): New helper function. (aarch64_relocate_instruction): New function. (aarch64_install_fast_tracepoint_jump_pad): Likewise. (aarch64_get_min_fast_tracepoint_insn_len): Likewise. (struct linux_target_ops): Install aarch64_get_thread_area, aarch64_install_fast_tracepoint_jump_pad and aarch64_get_min_fast_tracepoint_insn_len.
2015-09-21Make aarch64_decode_adrp handle both ADR and ADRP instructionsPierre Langlois4-7/+40
We will need to decode both ADR and ADRP instructions in GDBserver. This patch makes common code handle both cases, even if GDB only needs to decode the ADRP instruction. gdb/ChangeLog: * aarch64-tdep.c (aarch64_analyze_prologue): New is_adrp variable. Call aarch64_decode_adr instead of aarch64_decode_adrp. * arch/aarch64-insn.h (aarch64_decode_adrp): Delete. (aarch64_decode_adr): New function declaration. * arch/aarch64-insn.c (aarch64_decode_adrp): Delete. (aarch64_decode_adr): New function, factored out from aarch64_decode_adrp to decode both adr and adrp instructions.
2015-09-21Move instruction decoding into new arch/ directoryPierre Langlois9-201/+366
This patch moves the following functions into the arch/ common directory, in new files arch/aarch64-insn.{h,c}. They are prefixed with 'aarch64_': - aarch64_decode_adrp - aarch64_decode_b - aarch64_decode_cb - aarch64_decode_tb We will need them to implement fast tracepoints in GDBserver. For consistency, this patch also adds the 'aarch64_' prefix to static decoding functions that do not need to be shared right now. V2: make sure the formatting issues propagated fix `gdbserver/configure.srv'. gdb/ChangeLog: * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-insn.o. (HFILES_NO_SRCDIR): Add arch/aarch64-insn.h. (aarch64-insn.o): New rule. * configure.tgt (aarch64*-*-elf): Add aarch64-insn.o. (aarch64*-*-linux*): Likewise. * arch/aarch64-insn.c: New file. * arch/aarch64-insn.h: New file. * aarch64-tdep.c: Include arch/aarch64-insn.h. (aarch64_debug): Move to arch/aarch64-insn.c. Declare in arch/aarch64-insn.h. (decode_add_sub_imm): Rename to ... (aarch64_decode_add_sub_imm): ... this. (decode_adrp): Rename to ... (aarch64_decode_adrp): ... this. Move to arch/aarch64-insn.c. Declare in arch/aarch64-insn.h. (decode_b): Rename to ... (aarch64_decode_b): ... this. Move to arch/aarch64-insn.c. Declare in arch/aarch64-insn.h. (decode_bcond): Rename to ... (aarch64_decode_bcond): ... this. Move to arch/aarch64-insn.c. Declare in arch/aarch64-insn.h. (decode_br): Rename to ... (aarch64_decode_br): ... this. (decode_cb): Rename to ... (aarch64_decode_cb): ... this. Move to arch/aarch64-insn.c. Declare in arch/aarch64-insn.h. (decode_eret): Rename to ... (aarch64_decode_eret): ... this. (decode_movz): Rename to ... (aarch64_decode_movz): ... this. (decode_orr_shifted_register_x): Rename to ... (aarch64_decode_orr_shifted_register_x): ... this. (decode_ret): Rename to ... (aarch64_decode_ret): ... this. (decode_stp_offset): Rename to ... (aarch64_decode_stp_offset): ... this. (decode_stp_offset_wb): Rename to ... (aarch64_decode_stp_offset_wb): ... this. (decode_stur): Rename to ... (aarch64_decode_stur): ... this. (decode_tb): Rename to ... (aarch64_decode_tb): ... this. Move to arch/aarch64-insn.c. Declare in arch/aarch64-insn.h. (aarch64_analyze_prologue): Adjust calls to renamed functions. gdb/gdbserver/ChangeLog: * Makefile.in (aarch64-insn.o): New rule. * configure.srv (aarch64*-*-linux*): Add aarch64-insn.o.
2015-09-21Wrap gdb_agent_op_sizes by #ifndef IN_PROCESS_AGENTYao Qi2-0/+6
Hi, I see the following build warning with recent GCC built from mainline, aarch64-none-linux-gnu-gcc -g -O2 -I. -I/home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver -I/home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/../common -I/home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/../regformats -I/home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/.. -I/home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/../../include -I/home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/../gnulib/import -Ibuild-gnulib-gdbserver/import -Wall -Wpointer-arith -Wformat-nonliteral -Wno-char-subscripts -Wempty-body -Wdeclaration-after-statement -Werror -DGDBSERVER -DCONFIG_UST_GDB_INTEGRATION -fPIC -DIN_PROCESS_AGENT -fvisibility=hidden -c -o ax-ipa.o -MT ax-ipa.o -MMD -MP -MF .deps/ax-ipa.Tpo `echo " -Wall -Wpointer-arith -Wformat-nonliteral -Wno-char-subscripts -Wempty-body -Wdeclaration-after-statement " | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"` /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/ax.c /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/ax.c:73:28: error: 'gdb_agent_op_sizes' defined but not used [-Werror=unused-const-variable] static const unsigned char gdb_agent_op_sizes [gdb_agent_op_last] = ^ cc1: all warnings being treated as errors gdb_agent_op_sizes is only used in function is_goto_target, which is defined inside #ifndef IN_PROCESS_AGENT. This warning is not arch specific, so GCC mainline for other targets should produce this warning too, although this warning is triggered by enabling aarch64 fast tracepoint. The fix is to move gdb_agent_op_sizes to gdb/gdbserver: 2015-09-21 Yao Qi <yao.qi@linaro.org> * ax.c [!IN_PROCESS_AGENT] (gdb_agent_op_sizes): Define it.
2015-09-21[gdbserver] Remove unused max_jump_pad_sizeYao Qi2-3/+4
This patch is to remove max_jump_pad_size which isn't used else where, and it causes a recent gcc warning like this, gdb/gdbserver/tracepoint.c:2920:18: error: 'max_jump_pad_size' defined but not used [-Werror=unused-const-variable] static const int max_jump_pad_size = 0x100; ^ cc1: all warnings being treated as errors This variable max_jump_pad_size wasn't used since it was added in 2010 by https://sourceware.org/ml/gdb-patches/2010-06/msg00002.html gdb/gdbserver: 2015-09-21 Yao Qi <yao.qi@linaro.org> * tracepoint.c (max_jump_pad_size): Remove.
2015-09-20dwarf2read.c (add_partial_symbol): Remove outdated comments.Doug Evans2-6/+4
gdb/ChangeLog: * dwarf2read.c (add_partial_symbol): Remove outdated comments.
2015-09-20dwarf2_compute_name: add fixme, don't use same name as parameter for localDoug Evans2-8/+18
gdb/ChangeLog: * dwarf2read.c (dwarf2_compute_name): Add FIXME. Don't use a local variable name that collides with a parameter.
2015-09-20crash printing non-local variable from nested subprogramJoel Brobecker2-4/+51
We have noticed that GDB would sometimes crash trying to print from a nested function the value of a variable declared in an enclosing scope. This appears to be target dependent, although that correlation might only be fortuitious. We noticed the issue on x86_64-darwin, x86-vxworks6 and x86-solaris. The investigation was done on Darwin. This is a new feature that was introduced by: commit 63e43d3aedb8b1112899c2d0ad74cbbee687e5d6 Date: Thu Feb 5 17:00:06 2015 +0100 DWARF: handle non-local references in nested functions We can reproduce the problem with one of the testcases that was added with the patch (gdb.base/nested-subp1.exp), where we have... 18 int 19 foo (int i1) 20 { 21 int 22 nested (int i2) 23 { [...] 27 return i1 * i2; /* STOP */ 28 } ... After building the example program, and running until line 27, try printing the value of "i1": % gdb gdb.base/nested-subp1 (gdb) break foo.c:27 (gdb) run Breakpoint 1, nested (i2=2) at /[...]/nested-subp1.c:27 27 return i1 * i2; /* STOP */ (gdb) p i1 [1] 73090 segmentation fault ../gdb -q gdb.base/nested-subp1 Ooops! What happens is that, because the reference is non-local, we are trying to follow the function's static link, which does... /* If we don't know how to compute FRAME's base address, don't give up: maybe the frame we are looking for is upper in the stace frame. */ if (framefunc != NULL && SYMBOL_BLOCK_OPS (framefunc)->get_frame_base != NULL && (SYMBOL_BLOCK_OPS (framefunc)->get_frame_base (framefunc, frame) == upper_frame_base)) ... or, in other words, calls the get_frame_base "method" of framefunc's struct symbol_block_ops data. This resolves to the block_op_get_frame_base function. Looking at the function's implementation, we see: struct dwarf2_locexpr_baton *dlbaton; [...] dlbaton = SYMBOL_LOCATION_BATON (framefunc); [...] result = dwarf2_evaluate_loc_desc (type, frame, start, length, dlbaton->per_cu); ^^^^^^^^^^^^^^^ Printing dlbaton->per_cu gives a value that seems fairly bogus for a memory address (0x60). Because of it, dwarf2_evaluate_loc_desc then crashes trying to dereference it. What's different on Darwin compared to Linux is that the function's frame base is encoded using the following form: .byte 0x40 # uleb128 0x40; (DW_AT_frame_base) .byte 0x6 # uleb128 0x6; (DW_FORM_data4) ... and so dwarf2_symbol_mark_computed ends up creating a SYMBOL_LOCATION_BATON as a struct dwarf2_loclist_baton: if (attr_form_is_section_offset (attr) /* .debug_loc{,.dwo} may not exist at all, or the offset may be outside the section. If so, fall through to the complaint in the other branch. */ && DW_UNSND (attr) < dwarf2_section_size (objfile, section)) { struct dwarf2_loclist_baton *baton; [...] SYMBOL_LOCATION_BATON (sym) = baton; However, if you look more closely at block_op_get_frame_base's implementation, you'll notice that the function extracts the symbol's SYMBOL_LOCATION_BATON as a dwarf2_locexpr_baton (a DWARF _expression_ rather than a _location list_). That's why we end up decoding the DLBATON improperly, and thus pass a random dlbaton->per_cu when calling dwarf2_evaluate_loc_desc. This works on x86_64-linux, because we indeed have the frame base described using a different form: .uleb128 0x40 # (DW_AT_frame_base) .uleb128 0x18 # (DW_FORM_exprloc) This patch fixes the issue by doing what we do for most (if not all) other such methods: providing one implementation each for loc-list, and loc-expr. Both implementations are nearly identical, so perhaps we might later want to improve this. But this patch first tries to fix the crash first, leaving the design issue for later. gdb/ChangeLog: * dwarf2loc.c (locexpr_get_frame_base): Renames block_op_get_frame_base. (dwarf2_block_frame_base_locexpr_funcs): Replace reference to block_op_get_frame_base by reference to locexpr_get_frame_base. (loclist_get_frame_base): New function, near identical copy of locexpr_get_frame_base. (dwarf2_block_frame_base_loclist_funcs): Replace reference to block_op_get_frame_base by reference to loclist_get_frame_base. Tested on x86_64-darwin (AdaCore testsuite), and x86_64-linux (official testsuite).
2015-09-19Replace current_inferior ()->gdbarch with its wrapper target_gdbarch.Doug Evans2-1/+6
gdb/ChangeLog: * ravenscar-thread.c (ravenscar_inferior_created): Replace current_inferior ()->gdbarch with its wrapper target_gdbarch.