Age | Commit message (Collapse) | Author | Files | Lines |
|
* monitor.c (monitor_read_memory): Zero out pattern buffers
before calling re_search.
(parse_register_dump): Ditto.
PR 18049. This bug had existed erratically since I upgraded to
the new gnu-regex.c this last summer. The problem is mostly in
parse_register_dump; the allocated structure has some random values
in it and there is a flag set in the register_pattern structure by the
gnu-regex library which indicates that the values in the re_registers
should be trusted.
If those arbitrary contents aren't zero, gnu-regex tries to run realloc
on them and we get a core dump on some hosts for some targets when the
moon is just right.
|
|
protocol caches register values instead of GDB itself.
|
|
|
|
|
|
|
|
|
|
functions unnecessarily returning values.
|
|
* gdb.c++/cplusfuncs.cc, misc.cc, virtfunc.cc: Add now-required
int return types.
|
|
* m32r-tdep.c (decode_prologue): If no branch or push fp is found,
but there's a stack adjust, then use that as the end of prologue.
(m32r_skip_prologue): don't skip past the first line if there is
line info. (m32r_virtual_frame_pointer): new function.
(m32r_fix_call_dummy): no return value needed.
|
|
* tracepoint.c: Move default definition of
TARGET_VIRTUAL_FRAME_POINTER from here to target.h.
* target.h: Add default definition of TARGET_VIRTUAL_FRAME_POINTER.
* ax-gdb.c (gen_frame_args_address, gen_frame_locals_address):
use TARGET_VIRTUAL_FRAME_POINTER to determine frame pointer.
(gen_trace_for_expr): new argument, address of tracepoint,
gets passed to new_agent_expr and added to struct agent_expr.
(is_nontrivial_conversion): call to new_agent_expr now requires
a dummy argument. (agent_command): use get_current_frame() to
get current PC scope; pass it to gen_trace_for_expr.
* ax-general.c (new_agent_expr): new argument, address of
tracepoint; store it in new field of struct agent_expr.
* ax.h (struct agent_expr): add new field for tracepoint address.
* ax-gdb.h: change prototypes to match above changes.
|
|
(CHILL_PRODUCER, etc): Comment out descriptions, not useful.
(IN_SOLIB_CALL_TRAMPOLINE): Rename info from IN_SOLIB_TRAMPOLINE.
(IN_SOLIB_RETURN_TRAMPOLINE): Describe.
(KERNEL_DEBUGGING, MIPSEL): No info about these, remove.
|
|
|
|
|
|
Cleanup FRAME_CHAIN_VALID. Replace all macro's with functions.
|
|
Convert ADDR_BITS_REMOVE to a function.
|
|
Rewrite INNER_THAN so that it takes parameters.
|
|
STEP_SKIPS_DELAY - add STEP_SKIPS_DELAY_P and rewrite use removing
#ifdef's.
NO_SINGLE_STEP - replace with SOFTWARE_SINGLE_STEP_P +
SOFTWARE_SINGLE_STEP. Replace global variable one_stepped with static
singlestep_breakpoints_inserted_p. Cleanup infrun.c (scary!).
|
|
|
|
and little_breakpoint to char[] from char*.
* remote-array.c (array_insert_breakpoint): Change bp_addr to
CORE_ADDR type.
|
|
canadian-crossed to host i386-cygwin.
|
|
address of bplen.
|
|
|
|
* config.sub (mips64vr4xxx,mips64vr4xxxel): New.
For gcc:
* config.sub (mips64vr4xxx,mips64vr4xxxel): New.
* configure.in (mips64vr4xxx,mips64vr4xxxel): New.
* config/mips/t-vr4xxx: New.
* config/mips/elfb4xxx.h: New.
* config/mips/elfl4xxx.h: New.
* configure: Rebuilt.
For gas:
* config/tc-mips.c (md_begin): Added mip64vr4xxx as a
possible CPU_TARGET.
For gdb:
* configure.tgt: Handle mips64*vr4xxx.
For ld:
* configure.tgt: Handle mips64*vr4xxx.
|
|
* config/mn10300/tm-mn10300.h (TARGET_VIRTUAL_FRAME_POINTER):
new target macro.
* mn10300-tdep.c (mn10300_virtual_frame_pointer): new function.
* tracepoint.c (encode_actions): Use the new target macro to
determine the virtual frame pointer, for collecting locals/args.
(add_local_symbols, collect_symbol): add a register/offset pair of
arguments so that the virtual frame pointer can be passed in.
|
|
* procfs.c (GDB_GREGSET_TYPE, GDB_FPREGSET_TYPE): new macros.
* config/sparc/xm-sun4sol2.h: use them.
* core-sol2.c: don't #undef gregset_t and fpregset_t.
* sol-thread.c: ditto.
* sparc-tdep.c: ditto.
|
|
Convert mn10300, MIPS and powerpc/rs6000 targets to use
BREAKPOINT_FROM_PC
Delete global variable memory_breakpoint_size. Use BREAKPOINT_FROM_PC
instead.
|
|
* symfile.c (deduce_language_from_filename): rewrite so as to
work from a table of filename extensions, modifiable by the user.
(filename_language_table): new data structure.
(set_ext_lang_command): new function for new command, "set
extension-language". (info_extension_language_command): new
function for new command "info extension-languages".
(add_filename_language, init_filename_language_table): new
support functions for the above.
* language.c (language_enum): new function. Support for above.
|
|
specific functions.
|
|
* breakpoint.c (bpstat_stop_status): Do not increment hit_count
of breakpoint if condition is not true.
|
|
* coffread.c (coff_symtab_read): Discard C_LABEL's that are not
function entry points, to avoid getting them in the stack dump
instead of the actual function.
|
|
|
|
without NAT_FILE definition, configure will assume that GDB cannot
run native.
* config/m68k/nm-delta68.h (KERNEL_U_SIZE): New macro.
* delta68-nat.c (kernel_u_size): New function.
|
|
|
|
|
|
|
|
|
|
* buildsym.c (end_symtab): Cleanup PROCESS_LINENUMBER_HOOK.
|
|
* rdi-share/host.h: if compiling under Cygwin, make sure new
preprocessor define is defined. Define it if not.
* rdi-share/hostchan.h: ditto
* rdi-share/aclocal.m4: regenerate
* rdi-share/configure: regenerate
|
|
* rdi-share/host.h: if compiling under Cygwin, make sure new
preprocessor define is defined. Define it if not.
* rdi-share/aclocal.m4: regenerate
* rdi-share/configure: regenerate
|
|
* configure.in: switch back to checking __CYGWIN32__
* configure: regenerate
|
|
* exec.c (exec_file_command): Cleanup. Replace #if
NEED_TEXT_START_END with if().
* config/pa/nm-hppah.h (NEED_TEXT_START_END): Redefine to be 1.
* config/convex/tm-convex.h (NEED_TEXT_START_END): Ditto.
* config/gould/tm-np1.h (NEED_TEXT_START_END): Ditto.
* config/a29k/tm-a29k.h (NEED_TEXT_START_END): Ditto.
|
|
* main.c: Wait until more time has passed before calling
new cygwin_ funcs, revert back to the cygwin32_ ones for now.
* win32-nat.c: Ditto.
|
|
* gdbtk-cmds.c: Can't start using new API names yet. Switch
back
to calling cygwin32_ funcs until some time has passed...
* gdbtk.c: Ditto. Also, include sys/cygwin.h for Cygwin,
instead
of providing own proto.
|
|
|
|
|
|
* procfs.c (proc_set_exec_trap): don't set PR_ASYNC or PR_FORK
in the child process for UnixWare (causes processes forked by
the debuggee to hang).
|
|
* defs.h: if compiling under Cygwin, define __CYGWIN__ if
__CYGWIN32__ is defined and __CYGWIN__ isn't for backwards
compatibility.
|
|
|
|
|
|
Changes to account for name change from cygwin32 to cygwin and
clean up Win32-related ifdefs.
* configure.tgt: check for cygwin* instead of cygwin32.
New cygwin gdb_target variable loses the "32".
* configure.host: check for cygwin* instead of cygwin32.
New cygwin gdb_host variable loses the "32".
* configure.in: test __CYGWIN__ instead of __CYGWIN32__,
rename gdb_cv_os_cygwin32 variable to drop the "32". Call
AM_EXEEXT instead of AC_EXEEXT since that isn't in a released
autoconf yet.
* configure: regenerate.
* main.c: drop "32" from cygwin_ funcs, include sys/cygwin.h
where
cygwin path conv protos live, instead of adding a proto here
for
them here.
* {main.c, ser-tcp.c, ser-unix.c, top.c}: check __CYGWIN__
instead of __CYGWIN32__.
* source.c: thoughout, check _WIN32 instead of WIN32.
* config/i386/cygwin32.mh: delete.
* config/i386/cygwin.mh: new file, was cygwin32.mh.
* config/i386/cygwin32.mt: delete.
* config/i386/cygwin.mt: new file, was cygwin32.mt.
* config/i386/tm-cygwin32.h: delete.
* config/i386/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/i386/xm-cygwin32.h: delete.
* config/i386/xm-cygwin.h: new file, was xm-cygwin32.h.
* config/i386/xm-windows.h: #include xm-cygwin.h now.
* config/powerpc/cygwin32.mh: delete.
* config/powerpc/cygwin.mh: new file, was cygwin32.mh.
* config/powerpc/cygwin32.mt: delete.
* config/powerpc/cygwin.mt: new file, was cygwin32.mt.
* config/powerpc/tm-cygwin32.h: delete.
* config/powerpc/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/powerpc/xm-cygwin32.h: delete.
* config/powerpc/xm-cygwin.h: new file, was xm-cygwin32.h.
* rdi-share/aclocal.m4: regenerate with aclocal.
* rdi-share/configure: regenerate with autoconf.
* rdi-share/{host.h, hostchan.c, hostchan.h, serdrv.c,
* serpardr.c,
unixcomm.c}: check __CYGWIN__ instead of __CYGWIN32__.
|