aboutsummaryrefslogtreecommitdiff
path: root/gdb/xcoffread.c
AgeCommit message (Collapse)AuthorFilesLines
2022-06-10Fix warning-avoidance initialization in xcoffread.cTom Tromey1-1/+1
With the registry rewrite series, on Fedora 34, I started seeing this error in xcoffread.c: ../../binutils-gdb/gdb/xcoffread.c: In function ‘void read_xcoff_symtab(objfile*, legacy_psymtab*)’: ../../binutils-gdb/gdb/xcoffread.c:948:25: error: ‘main_aux’ is used uninitialized [-Werror=uninitialized] 948 | union internal_auxent fcn_aux_saved = main_aux; | ^~~~~~~~~~~~~ ../../binutils-gdb/gdb/xcoffread.c:933:25: note: ‘main_aux’ declared here 933 | union internal_auxent main_aux; | ^~~~~~~~ I don't know why this error started suddenly... that seems weird, because it's not obviously related to the changes I made. Looking into it, it seems this line was intended to avoid a similar warning -- but since 'main_aux' is uninitialized at the point where it is used, this fix was incomplete. This patch avoids the warning by initializing using "{}". I'm checking this in.
2022-06-02ODR warnings for "struct coff_symbol"Tom Tromey1-10/+10
"struct coff_symbol" is defined in multiple .c files, causing ODR warnings. This patch renames just the xcoffread.c type. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
2022-06-02ODR warning for "struct find_targ_sec_arg"Tom Tromey1-3/+4
"struct find_targ_sec_arg" is defined in multiple .c files, causing ODR warnings. This patch renames the types. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
2022-06-02ODR warnings for struct symlocTom Tromey1-14/+14
"struct symloc" is defined in multiple spots in gdb, causing ODR warnings. This patch renames these. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
2022-04-21Always use dwarf2_initialize_objfileTom Tromey1-3/+1
Internally we noticed that some tests would fail like so on Windows: warning: Section .debug_aranges in [...] has duplicate debug_info_offset 0x0, ignoring .debug_aranges. Debugging showed that, in fact, a second CU was being created at this offset. We tracked this down to the fact that, while the ELF reader is careful to re-use the per-BFD data, other readers are not, and could re-read the DWARF data multiple times. However, since the change to allow an objfile to have multiple "quick symbol" implementations, there's no reason for this approach -- it's safe and easy for all symbol readers to reuse the per-BFD data when reading DWARF. This patch implements this idea, simplifying dwarf2_build_psymtabs and making it private, and then switching to dwarf2_initialize_objfile as the sole way to start the DWARF reader. Note that, while I think the call to dwarf2_build_frame_info in machoread.c is also obsolete, I haven't attempted to remove it here.
2022-04-12gdb: change subfile::line_vector to an std::vectorSimon Marchi1-87/+31
Change this field to an std::vector to facilitate memory management. Since the linetable_entry array is copied into the symtab resulting from the subfile, it is possible to change it without changing how symtab stores the linetable entries (which would be a much larger change). There is a small change in buildsym_compunit::record_line to avoid accessing a now invalid linetable_entry. Before this patch, we keep a pointer to the last linetable entry, pop it from the vector, and then read last->line. It works with the manually-maintained array, but since we now use std::vector::pop_back, I am afraid that it could be flagged as an invalid access by the various static / dynamic analysis tools to access the linetable_entry object after popping it from the vector. Instead, record just the line number in an optional and use it. There are substantial changes in xcoffread.c that simplify the code, but I can't test them. I was hesitant to do this change because of that, but I decided to send it anyway. I don't think that an almost dead platform should hold back improving the code in the common parts of GDB. The changes in xcoffread.c are: - Make arrange_linetable "arrange" the linetable passed as a parameter, instead of returning possibly a new one, possibly the same one. - In the "Process main file's line numbers.", I'm not too sure what happens. We get the lintable from "main_subfile", "arrange" it, but then assign the result to the current subfile, obtained with get_current_subfile. I assume that the current subfile is also the main one, so now I just call arrange_linetable on the main subfile's line table. - Remove that weird "Useless if!!!" FIXME comment. It's been there forever, but the "if" is still there, so I guess the "if" can stay there. Change-Id: I11799006fd85189e8cf5bd3a168f8f38c2c27a80
2022-04-12gdb: use std::vector for temporary linetable_entry array in arrange_linetableSimon Marchi1-47/+31
Reduce manual memory management and make the code a bit easier to read. This helps me a bit in the following patch. I don't have a way to test this, it's best-effort. Change-Id: I64af9cd756311deabc6cd95e701dfb21234a40a5
2022-04-12gdb: change subfile::name and buildsym_compunit::m_comp_dir to stringsSimon Marchi1-2/+1
Change subfile::name to be a string, for easier memory management. Change buildsym_compunit::m_comp_dir as well, since we move one in to the other at some point in patch_subfile_names, so it's easier to do both at the same time. There are various NULL checks for both fields currently, replace them with empty checks, I think it ends up equivalent. I can't test the change in xcoffread.c, it's best-effort. Change-Id: I62b5fb08b2089e096768a090627ac7617e90a016
2022-04-12gdb: allocate subfile with newSimon Marchi1-8/+2
Allocate struct subfile with new, initialize its fields instead of memset-ing it to 0. Use a unique_ptr for the window after a subfile has been allocated but before it is linked in the buildsym_compunit's list of subfile (and therefore owned by the buildsym_compunit. I can't test the change in xcoffread.c, it's best-effort. I couldn't find where subfiles are freed in that file, I assume they were intentionally (or not) leaked. Change-Id: Ib3b6877de31b7e65bc466682f08dbf5840225f24
2022-04-11gdb: remove symbol value macrosSimon Marchi1-4/+3
Remove all macros related to getting and setting some symbol value: #define SYMBOL_VALUE(symbol) (symbol)->value.ivalue #define SYMBOL_VALUE_ADDRESS(symbol) \ #define SET_SYMBOL_VALUE_ADDRESS(symbol, new_value) \ #define SYMBOL_VALUE_BYTES(symbol) (symbol)->value.bytes #define SYMBOL_VALUE_COMMON_BLOCK(symbol) (symbol)->value.common_block #define SYMBOL_BLOCK_VALUE(symbol) (symbol)->value.block #define SYMBOL_VALUE_CHAIN(symbol) (symbol)->value.chain #define MSYMBOL_VALUE(symbol) (symbol)->value.ivalue #define MSYMBOL_VALUE_RAW_ADDRESS(symbol) ((symbol)->value.address + 0) #define MSYMBOL_VALUE_ADDRESS(objfile, symbol) \ #define BMSYMBOL_VALUE_ADDRESS(symbol) \ #define SET_MSYMBOL_VALUE_ADDRESS(symbol, new_value) \ #define MSYMBOL_VALUE_BYTES(symbol) (symbol)->value.bytes #define MSYMBOL_BLOCK_VALUE(symbol) (symbol)->value.block Replace them with equivalent methods on the appropriate objects. Change-Id: Iafdab3b8eefc6dc2fd895aa955bf64fafc59ed50
2022-04-04gdb: rename start_symtab/end_symtab to start_compunit_symtab/end_compunit_symtabSimon Marchi1-13/+15
It's a bit confusing because we have both "compunit_symtab" and "symtab" types, and many methods and functions containing "start_symtab" or "end_symtab", which actually deal with compunit_symtabs. I believe this comes from the time before compunit_symtab was introduced, where symtab did the job of both. Rename everything I found containing start_symtab or end_symtab to use start_compunit_symtab or end_compunit_symtab. Change-Id: If3849b156f6433640173085ad479b6a0b085ade2
2022-02-21gdb: make use of std::string in dbxread.c and xcoffread.cAndrew Burgess1-14/+4
While taking a look through dbxread.c I spotted a couple of places where making use of std::string would remove the need for manual memory allocation and memcpy. During review Simon pointed out that the same code exists in xcoffread.c, so I've applied the same fix there too. There should be no user visible changes after this commit.
2022-02-06gdb: remove SYMBOL_TYPE macroSimon Marchi1-2/+2
Add a getter and a setter for a symbol's type. Remove the corresponding macro and adjust all callers. Change-Id: Ie1a137744c5bfe1df4d4f9ae5541c5299577c8de
2022-02-06gdb: remove SYMBOL_DOMAIN macroSimon Marchi1-1/+1
Add a getter and a setter for a symbol's domain. Remove the corresponding macro and adjust all callers. Change-Id: I54465b50ac89739c663859a726aef8cdc6e4b8f3
2022-02-06gdb: remove SYMBOL_ACLASS_INDEX macro, add getter/setterSimon Marchi1-1/+1
Add a getter and a setter for a symbol's aclass index. Remove the corresponding macro and adjust all callers. Change-Id: Ie8c8d732624cfadb714aba5ddafa3d29409b3d39
2022-01-01Automatic Copyright Year update after running gdb/copyright.pyJoel Brobecker1-1/+1
This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script.
2021-11-10gdb: adjust x_file fields on COFF readersClément Chigot1-3/+3
Commit e86fc4a5bc37 ("PR 28447: implement multiple parameters for .file on XCOFF") changes the structure associated to the internal representation of files in COFF formats. However, gdb directory update has been forgotten, leading to compilation errors of this kind: CXX coffread.o /home/simark/src/binutils-gdb/gdb/coffread.c: In function 'const char* coff_getfilename(internal_auxent*)': /home/simark/src/binutils-gdb/gdb/coffread.c:1343:29: error: 'union internal_auxent::<unnamed struct>::<unnamed>' has no member named 'x_zeroes' 1343 | if (aux_entry->x_file.x_n.x_zeroes == 0) | ^~~~~~~~ Fix it by adjusting the COFF code in GDB. Change-Id: I703fa134bc722d47515efbd72b88fa5650af6c3c
2021-05-27gdb: fix some indentation issuesSimon Marchi1-12/+13
I wrote a small script to spot a pattern of indentation mistakes I saw happened in breakpoint.c. And while at it I ran it on all files and fixed what I found. No behavior changes intended, just indentation and addition / removal of curly braces. gdb/ChangeLog: * Fix some indentation mistakes throughout. gdbserver/ChangeLog: * Fix some indentation mistakes throughout. Change-Id: Ia01990c26c38e83a243d8f33da1d494f16315c6e
2021-04-02gdb: pass objfile_per_bfd_storage instead of objfile to partial_symtabSimon Marchi1-2/+2
Since partial_symtab is supposed to be objfile-independent (since series [1]), I think it would make sense for partial_symtab to not take an objfile as a parameter in its constructor. This patch replaces that parameter with an objfile_per_bfd_storage parameter. The objfile is used for two things: - to get the objfile_name, for debug messages. We can get that name from the bfd instead. - to intern the partial symtab filename. Even though it goes through an objfile method, the request is actually forwarded to the underlying objfile_per_bfd_storage. So we can ask the new objfile_per_bfd_storage instead. In order to get a reference to the BFD from the objfile_per_bfd_storage, the BFD is saved in the objfile_per_bfd_storage object. [1] https://sourceware.org/pipermail/gdb-patches/2021-February/176625.html gdb/ChangeLog: * psympriv.h (struct partial_symtab) <partial_symtab>: Change objfile parameter for objfile_per_bfd_storage, adjust callers. (struct standard_psymtab) <standard_psymtab>: Likewise. (struct legacy_psymtab) <legacy_psymtab>: Likewise. * psymtab.c (partial_symtab::partial_symtab): Likewise. * ctfread.c (struct ctf_psymtab): Likewise. * dwarf2/read.h (struct dwarf2_psymtab): Likewise. * dwarf2/read.c (struct dwarf2_include_psymtab): Likewise. (dwarf2_create_include_psymtab): Likewise. * objfiles.h (struct objfile_per_bfd_storage) <objfile_per_bfd_storage>: Add bfd parameter, adjust callers. <get_bfd>: New method. <m_bfd>: New field. * objfiles.c (get_objfile_bfd_data): Adjust. Change-Id: I2ed3ab5d2e6f27d034bd4dc26ae2fae7b0b8a2b9
2021-03-20Allow multiple partial symbol readers per objfileTom Tromey1-1/+3
This patch finally changes gdb so that an objfile can have multiple sources of partial symbols (or mixed partial symbols and other kinds of indices). This is done by having each symbol reader create its own psymbol_functions object and add it to the 'qf' list in the objfile. gdb/ChangeLog 2021-03-20 Tom Tromey <tom@tromey.com> * xcoffread.c (xcoff_initial_scan): Create partial symtabs. * symfile.c (syms_from_objfile_1, reread_symbols): Update. * psymtab.h (make_psymbol_functions): Don't declare. * psymtab.c (make_psymbol_functions): Remove. (maintenance_print_psymbols): Update. * psympriv.h (struct psymbol_functions): Add no-argument constructor. * objfiles.h (struct objfile) <reset_psymtabs>: Remove. <partial_symtabs>: Remove. * mdebugread.c (mdebug_build_psymtabs): Create partial symtabs. * elfread.c (read_partial_symbols): Update. (elf_symfile_read): Remove check for existing partial symbols. Don't clear "qf". * dwarf2/read.c (dwarf2_has_info): Remove check for existing partial symbols. (dwarf2_build_psymtabs): Add psymbol_functions parameter. Create partial symtabs. * dwarf2/public.h (dwarf2_build_psymtabs): Add psymbol_functions parameter. * dbxread.c (dbx_symfile_read): Create partial symtabs. * ctfread.c (elfctf_build_psymtabs): Create partial symtabs.
2021-03-20Add partial_symtabs parameter to psymtab construction functionsTom Tromey1-14/+25
This adds a partial_symtabs parameter to the psymtab constructors and to add_psymbol. This helps with the overall project of removing the partial symtabs from the objfile. gdb/ChangeLog 2021-03-20 Tom Tromey <tom@tromey.com> * xcoffread.c (xcoff_start_psymtab): Add partial_symtabs parameter. (xcoff_end_psymtab, scan_xcoff_symtab): Update. * psymtab.c (partial_symtab::partial_symtab): Add partial_symtabs parameter. (add_psymbol_to_bcache): Remove. (partial_symtab::add_psymbol): Add partial_symtabs parameter. (partial_symtab::add_psymbol, partial_symtab::partial_symtab): Likewise. * psympriv.h (partial_symtab): Add partial_symtabs parameter. <add_psymbol>: Likewise. (standard_psymtab, legacy_psymtab): Likewise. * mdebugread.c (parse_partial_symbols): Update. (handle_psymbol_enumerators): Add partial_symtabs parameter. (handle_psymbol_enumerators): Update. (new_psymtab): Add partial_symtabs parameter. * dwarf2/read.h (dwarf2_psymtab): Add partial_symtabs parameter. * dwarf2/read.c (dwarf2_include_psymtab): Add partial_symtabs parameter. (dwarf2_create_include_psymtab): Add partial_symtabs parameter. (create_partial_symtab, add_partial_symbol, dwarf_decode_lines): Update. * dbxread.c (read_dbx_symtab): Update. (start_psymtab): Add partial_symtabs parameter. (dbx_end_psymtab): Update. * ctfread.c (struct ctf_context) <partial_symtabs>: New member. (ctf_psymtab): Add partial_symtabs parameter. (create_partial_symtab, ctf_psymtab_type_cb, ctf_psymtab_var_cb): Update. (scan_partial_symbols): Add partial_symtabs parameter. (scan_partial_symbols, elfctf_build_psymtabs) (ctf_psymtab_add_enums): Update.
2021-03-20Remove sym_fns::sym_read_psymbolsTom Tromey1-1/+0
Partial symbols are read via the sym_fns::sym_read_psymbols function pointer. In order to separate the partial symbols from the objfile, this must instead be done via a virtual method on quick_symbol_functions. This patch implements this change. gdb/ChangeLog 2021-03-20 Tom Tromey <tom@tromey.com> * xcoffread.c (xcoff_sym_fns): Update. * symfile.h (struct sym_fns) <sym_read_psymbols>: Remove. * symfile-debug.c (objfile::has_partial_symbols): Use can_lazily_read_symbols. (debug_sym_read_psymbols): Remove. (debug_sym_fns, install_symfile_debug_logging): Update. * quick-symbol.h (struct quick_symbol_functions) <can_lazily_read_symbols, read_partial_symbols>: New methods. * psymtab.c (require_partial_symbols): Use new 'qf' methods. * mipsread.c (ecoff_sym_fns): Update. * machoread.c (macho_sym_fns): Update. * elfread.c (struct lazy_dwarf_reader): New. (elf_symfile_read): Update. (read_psyms): Now a method of lazy_dwarf_reader. (elf_sym_fns): Update. (elf_sym_fns_lazy_psyms): Remove. * dbxread.c (aout_sym_fns): Update. * coffread.c (coff_sym_fns): Update.
2021-03-20Change how some psymbol readers access the psymtab storageTom Tromey1-8/+14
Currently, all psymbol readers access the psymtab storage via the objfile. This is done directly at any spot requiring the storage. In order to move psymbols out of the objfile, the psymtab_storage must be passed in explicitly. This patch consolidates the access of the storage in a single place in these readers, updating various functions to pass the storage object around. "Hidden" uses, like "objfile->psymtabs ()", are also updated. The DWARF reader is not yet touched. That requires more complicated changes. gdb/ChangeLog 2021-03-20 Tom Tromey <tom@tromey.com> * xcoffread.c (xcoff_end_psymtab): Add partial_symtabs parameter. (xcoff_end_psymtab): Update. (scan_xcoff_symtab): Add partial_symtabs parameter. (xcoff_initial_scan): Update. * stabsread.h (dbx_end_psymtab): Add partial_symtabs parameter. * mdebugread.c (mdebug_build_psymtabs): Update. (parse_partial_symbols): Add partial_symtabs parameter. * dbxread.c (dbx_symfile_read): Update. (read_dbx_symtab): Add partial_symtabs parameter. (read_dbx_symtab): Update. (dbx_end_psymtab): Add partial_symtabs parameter.
2021-03-20Move sym_fns::qf to objfileTom Tromey1-1/+0
Currently the "partial" symbol reader is attached to the objfile's symbol functions. However, in order to allow multiple separate partial symbol readers, this association must be changed. This patch moves the "qf" member out of sym_fns as a step toward that goal. gdb/ChangeLog 2021-03-20 Tom Tromey <tom@tromey.com> * psymtab.c (require_partial_symbols): Check that 'sf' is not null. * xcoffread.c (xcoff_sym_fns): Update. * symfile.h (struct sym_fns) <qf>: Remove. * symfile.c (syms_from_objfile_1, reread_symbols): Update. * symfile-debug.c (objfile::has_partial_symbols) (objfile::find_last_source_symtab) (objfile::forget_cached_source_info) (objfile::map_symtabs_matching_filename, objfile::lookup_symbol) (objfile::print_stats, objfile::dump) (objfile::expand_symtabs_for_function) (objfile::expand_all_symtabs) (objfile::expand_symtabs_with_fullname) (objfile::map_matching_symbols) (objfile::expand_symtabs_matching) (objfile::find_pc_sect_compunit_symtab) (objfile::map_symbol_filenames) (objfile::find_compunit_symtab_by_address) (objfile::lookup_global_symbol_language, debug_sym_fns) (install_symfile_debug_logging): Update. * objfiles.h (struct objfile) <qf>: New member. * mipsread.c (ecoff_sym_fns): Update. * machoread.c (macho_sym_fns): Update. * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_debug_names): Don't declare. (elf_symfile_read, elf_sym_fns, elf_sym_fns_lazy_psyms): Update. * dbxread.c (aout_sym_fns): Update. * coffread.c (coff_sym_fns): Update.
2021-03-20Introduce dwarf2/public.hTom Tromey1-0/+1
This moves some more DWARF code out of symfile.h and into a new header, dwarf2/public.h. This header is intended to describe the public API of the DWARF reader. gdb/ChangeLog 2021-03-20 Tom Tromey <tom@tromey.com> * coffread.c: Include dwarf2/public.h. * dwarf2/frame.c: Include dwarf2/public.h. * dwarf2/index-write.h: Include dwarf2/public.h, not symfile.h. * dwarf2/public.h: New file. * dwarf2/read.c: Include dwarf2/public.h. * elfread.c: Include dwarf2/public.h. * machoread.c: Include dwarf2/public.h. * symfile.h (dwarf2_has_info, enum dw_index_kind) (dwarf2_initialize_objfile, dwarf2_build_psymtabs) (dwarf2_build_frame_info): Move to dwarf2/public.h. * xcoffread.c: Include dwarf2/public.h.
2021-03-06Create new file dwarf2/sect-names.hTom Tromey1-0/+1
This creates a new file, dwarf2/sect-names.h, and moves some DWARF-specific type definitions from symfile.h into it. gdb/ChangeLog 2021-03-06 Tom Tromey <tom@tromey.com> * xcoffread.c: Include sect-names.h. * symfile.h (struct dwarf2_section_names, struct dwarf2_debug_sections): Move to dwarf2/sect-names.h. * dwarf2/sect-names.h: New file, from symfile.h. * dwarf2/read.c: Include sect-names.h.
2021-02-10gdb: delete SYMBOL_SECTION and MSYMBOL_SECTION macrosAndrew Burgess1-4/+4
Delete two more symbol/section related macros. This time it's SYMBOL_SECTION and MSYMBOL_SECTION. As with general_symbol_info::m_name it is not currently possible to make general_symbol_info::m_section private as general_symbol_info must remain a POD type. But other than failing to make the new m_section private, this change does what you'd expect, adds a get and set member function and updates all users to use the new functions instead of the previous wrapper macros. There should be no user visible change after this commit. gdb/ChangeLog: * coff-pe-read.c (add_pe_forwarded_sym): Make use of section_index and set_section_index member functions where appropriate. * coffread.c (coff_symtab_read): Likewise. (process_coff_symbol): Likewise. * ctfread.c (set_symbol_address): Likewise. * dwarf2/read.c (add_partial_symbol): Likewise. (var_decode_location): Likewise. * language.c: Likewise. * minsyms.c (minimal_symbol_reader::record_full): Likewise. (compact_minimal_symbols): Likewise. (minimal_symbol_upper_bound): Likewise. * objfiles.c (relocate_one_symbol): Likewise. * psympriv.h (partial_symbol::obj_section): Likewise. (partial_symbol::address): Likewise. * psymtab.c (partial_symtab::add_psymbol): Likewise. * stabsread.c (scan_file_globals): Likewise. * symmisc.c (dump_msymbols): Likewise. * symtab.c (general_symbol_info::obj_section): Likewise. (fixup_section): Likewise. (get_msymbol_address): Likewise. * symtab.h (general_symbol_info::section): Rename to... (general_symbol_info::m_section): ...this. (general_symbol_info::set_section_index): New member function. (general_symbol_info::section_index): Likewise. (SYMBOL_SECTION): Delete. (MSYMBOL_VALUE_ADDRESS): Make use of section_index and set_section_index member functions where appropriate. (MSYMBOL_SECTION): Delete. (symbol::symbol): Update to initialize 'm_section'. * xcoffread.c (read_xcoff_symtab): Make use of set_section_index. (process_xcoff_symbol): Likewise.
2021-01-01Update copyright year range in all GDB filesJoel Brobecker1-1/+1
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2020-11-02gdb, gdbserver, gdbsupport: fix leading space vs tabs issuesSimon Marchi1-41/+41
Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
2020-11-01Change end_psymtab_common to a methodTom Tromey1-1/+1
This changes end_psymtab_common to be a method on partial_symtab. This seems a little cleaner to me. gdb/ChangeLog 2020-11-01 Tom Tromey <tom@tromey.com> * dbxread.c (dbx_end_psymtab): Update. * dwarf2/read.c (process_psymtab_comp_unit_reader) (build_type_psymtabs_reader): Update. * xcoffread.c (xcoff_end_psymtab): Update. * ctfread.c (scan_partial_symbols): Update. * psymtab.c (sort_pst_symbols): Remove. (partial_symtab::end): Rename from end_psymtab_common. Inline sort_pst_symbols. * psympriv.h (struct partial_symtab) <end>: New method. (end_psymtab_common): Don't declare.
2020-11-01Remove parameter from end_psymtab_commonTom Tromey1-1/+1
The objfile parameter to end_psymtab_common is no longer needed, so this removes it. gdb/ChangeLog 2020-11-01 Tom Tromey <tom@tromey.com> * dbxread.c (dbx_end_psymtab): Update. * dwarf2/read.c (process_psymtab_comp_unit_reader): Update. (build_type_psymtabs_reader): Update. * xcoffread.c (xcoff_end_psymtab): Update. * ctfread.c (scan_partial_symbols): Update. * psympriv.h (end_psymtab_common): Update. * psymtab.c (end_psymtab_common): Remove objfile parameter. (sort_pst_symbols): Likewise.
2020-11-01Remove init_psymbol_listTom Tromey1-6/+0
init_psymbol_list is now empty, and so this removes it. gdb/ChangeLog 2020-11-01 Tom Tromey <tom@tromey.com> * dbxread.c (dbx_symfile_read): Update. * dwarf2/read.c (dwarf2_build_psymtabs): Update. * xcoffread.c (xcoff_initial_scan): Update. * psympriv.h (init_psymbol_list): Don't declare. * psymtab.c (init_psymbol_list): Remove.
2020-10-17Have partial symbol tables own psymbol vectorsTom Tromey1-54/+53
Currently pointers to all partial symbols are stored in two vectors; and then indices into these vectors are stored in each partial_symtab. This patch changes this so that each partial symtab instead has vectors of symbols. add_psymbol_to_list can now be changed into a method on partial_symtab as well. My main motivation for doing this is that I am looking into calling sort_pst_symbols in the background. However, I haven't actually implemented this yet. (Also this may make it more feasible to also sort the static psymbols, though I haven't tried that either.) Also, though, this lets us remove the "current_global_psymbols" vector, because now the callers can simply refer directly to the psymtab that they are modifying (formerly this was implicit). The main drawback of this patch is that it increases the size of partial symtab. gdb/ChangeLog 2020-10-17 Tom Tromey <tom@tromey.com> * xcoffread.c (xcoff_end_psymtab): Use partial_symtab::empty. (scan_xcoff_symtab): Update. * psymtab.h (class psymtab_storage) <global_psymbols, static_psymbols, current_global_psymbols, current_static_psymbols>: Remove. * psymtab.c (require_partial_symbols, find_pc_sect_psymbol) (match_partial_symbol, lookup_partial_symbol): Update. (print_partial_symbols): Change parameters. (dump_psymtab, recursively_search_psymtabs) (psym_fill_psymbol_map, psym_find_compunit_symtab_by_address) (sort_pst_symbols, partial_symtab::partial_symtab): Update. (concat): Remove. (end_psymtab_common): Simplify. (append_psymbol_to_list): Change parameters. (partial_symtabs::add_psymbol): Rename from add_psymbol_to_list. (init_psymbol_list): Simplify. (maintenance_info_psymtabs, maintenance_check_psymtabs): Update. * psympriv.h (struct partial_symtab) <empty>: New method. <globals_offset, n_global_syms, statics_offset, n_static_syms>: Remove. <global_psymbols, static_psymbols>: New members. <add_psymbol>: New methods. (add_psymbol_to_list): Don't declare. (psymbol_placement): Move earlier. * mdebugread.c (parse_partial_symbols): Update. (handle_psymbol_enumerators): Change parameters. (mdebug_expand_psymtab): Update. * dwarf2/read.c (process_psymtab_comp_unit_reader) (add_partial_symbol): Update. * dwarf2/index-write.c (write_psymbols): Change parameters. (write_one_signatured_type): Update. (recursively_count_psymbols): Update. (recursively_write_psymbols): Update. (class debug_names) <recursively_write_psymbols>: Update. <write_psymbols>: Change parameters. <write_one_signatured_type>: Update. * dbxread.c (read_dbx_symtab): Update. (dbx_end_psymtab): Use partial_symtab::empty. * ctfread.c (struct ctf_context) <pst>: New member. (create_partial_symtab): Set it. (ctf_psymtab_type_cb, ctf_psymtab_var_cb): Update. (scan_partial_symbols): Use the psymtab's context. Update.
2020-08-28Fix two out-of-date commentsTom Tromey1-2/+1
While looking at psymtabs again, I noticed a couple of outdated comments. These days, psymtabs can be destroyed, as they are no longer obstack-allocated. gdb/ChangeLog 2020-08-28 Tom Tromey <tom@tromey.com> * xcoffread.c (xcoff_end_psymtab): Update comment. * dbxread.c (dbx_end_psymtab): Update comment.
2020-06-25Remove obsolete gdbarch_static_transform_nameRainer Orth1-5/+0
gdbarch_static_transform_name is completely Solaris-specific or rather specific to the Studio compilers. Studio cc has deprecated Stabs support in the 12.4 release back in 2015, GCC has defaulted to DWARF-2 on Solaris 7+ since 2004 and Stabs themselves are pretty much obsolete, so the whole code can go. Tested on sparcv9-sun-solaris2.11 and x86_64-pc-linux-gnu with --enable-targets=all. * sol2-tdep.c (sol2_static_transform_name): Remove. (sol2_init_abi): Don't register it. * gdbarch.sh (static_transform_name): Remove. * gdbarch.c, gdbarch.h: Regenerate. * dbxread.c (read_dbx_symtab) <'S'>: Remove call to gdbarch_static_transform_name. * mdebugread.c (parse_partial_symbols) <'S'>: Likewise. * stabsread.c (define_symbol) <'X'>: Remove. (define_symbol) <'S'>: Remove gdbarch_static_transform_name handling. <'V'>: Likewise. * xcoffread.c (scan_xcoff_symtab): Remove gdbarch. <'S'>: Remove call to gdbarch_static_transform_name.
2020-05-15Remove allocate_symbol et alTom Tromey1-8/+1
This removes allocate_symbol, allocate_template_symbol, and initialize_objfile_symbol in favor of changing the default values for symbol members, and updating the one per-arch caller. gdb/ChangeLog 2020-05-15 Tom Tromey <tom@tromey.com> * language.c (language_alloc_type_symbol): Set SYMBOL_SECTION. * symtab.c (initialize_objfile_symbol): Remove. (allocate_symbol): Remove. (allocate_template_symbol): Remove. * dwarf2/read.c (fixup_go_packaging): Use "new". (new_symbol): Use "new". (read_variable): Don't call initialize_objfile_symbol. Use "new". (read_func_scope): Use "new". * xcoffread.c (process_xcoff_symbol): Don't call initialize_objfile_symbol. (SYMBOL_DUP): Remove. * coffread.c (process_coff_symbol, coff_read_enum_type): Use "new". * symtab.h (allocate_symbol, initialize_objfile_symbol) (allocate_template_symbol): Don't declare. (struct symbol): Add copy constructor. Change defaults. * jit.c (finalize_symtab): Use "new". * ctfread.c (ctf_add_enum_member_cb, new_symbol, ctf_add_var_cb): Use "new". * stabsread.c (patch_block_stabs, define_symbol, read_enum_type) (common_block_end): Use "new". * mdebugread.c (parse_symbol): Use "new". (new_symbol): Likewise.
2020-04-18Change get_objfile_arch to a method on objfileTom Tromey1-2/+2
This changes get_objfile_arch to be a new inline method, objfile::arch. To my surprise, this function came up while profiling DWARF psymbol reading. Making this change improved performance from 1.986 seconds to 1.869 seconds. Both measurements were done by taking the mean of 10 runs on a fixed copy of the gdb executable. gdb/ChangeLog 2020-04-18 Tom Tromey <tom@tromey.com> * xcoffread.c (enter_line_range, scan_xcoff_symtab): Update. * value.c (value_fn_field): Update. * valops.c (find_function_in_inferior) (value_allocate_space_in_inferior): Update. * tui/tui-winsource.c (tui_update_source_windows_with_line): Update. * tui/tui-source.c (tui_source_window::set_contents): Update. * symtab.c (lookup_global_or_static_symbol) (find_function_start_sal_1, skip_prologue_sal) (print_msymbol_info, find_gnu_ifunc, symbol_arch): Update. * symmisc.c (dump_msymbols, dump_symtab_1) (maintenance_print_one_line_table): Update. * symfile.c (init_entry_point_info, section_is_mapped) (list_overlays_command, simple_read_overlay_table) (simple_overlay_update_1): Update. * stap-probe.c (handle_stap_probe): Update. * stabsread.c (dbx_init_float_type, define_symbol) (read_one_struct_field, read_enum_type, read_range_type): Update. * source.c (info_line_command): Update. * python/python.c (gdbpy_source_objfile_script) (gdbpy_execute_objfile_script): Update. * python/py-type.c (save_objfile_types): Update. * python/py-objfile.c (py_free_objfile): Update. * python/py-inferior.c (python_new_objfile): Update. * psymtab.c (psym_find_pc_sect_compunit_symtab, dump_psymtab) (dump_psymtab_addrmap_1, maintenance_info_psymtabs) (maintenance_check_psymtabs): Update. * printcmd.c (info_address_command): Update. * objfiles.h (struct objfile) <arch>: New method, from get_objfile_arch. (get_objfile_arch): Don't declare. * objfiles.c (get_objfile_arch): Remove. (filter_overlapping_sections): Update. * minsyms.c (msymbol_is_function): Update. * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines) (output_nondebug_symbol): Update. * mdebugread.c (parse_symbol, basic_type, parse_partial_symbols) (mdebug_expand_psymtab): Update. * machoread.c (macho_add_oso_symfile): Update. * linux-tdep.c (linux_infcall_mmap, linux_infcall_munmap): Update. * linux-fork.c (checkpoint_command): Update. * linespec.c (convert_linespec_to_sals): Update. * jit.c (finalize_symtab): Update. * infrun.c (insert_exception_resume_from_probe): Update. * ia64-tdep.c (ia64_find_unwind_table): Update. * hppa-tdep.c (internalize_unwinds): Update. * gdbtypes.c (get_type_arch, init_float_type, objfile_type): Update. * gcore.c (call_target_sbrk): Update. * elfread.c (record_minimal_symbol, elf_symtab_read) (elf_rel_plt_read, elf_gnu_ifunc_record_cache) (elf_gnu_ifunc_resolve_by_got): Update. * dwarf2/read.c (create_addrmap_from_index) (create_addrmap_from_aranges, dw2_find_pc_sect_compunit_symtab) (read_debug_names_from_section) (process_psymtab_comp_unit_reader, add_partial_symbol) (add_partial_subprogram, process_full_comp_unit) (read_file_scope, read_func_scope, read_lexical_block_scope) (read_call_site_scope, dwarf2_ranges_read) (dwarf2_record_block_ranges, dwarf2_add_field) (mark_common_block_symbol_computed, read_tag_pointer_type) (read_tag_string_type, dwarf2_init_float_type) (dwarf2_init_complex_target_type, read_base_type) (partial_die_info::read, partial_die_info::read) (read_attribute_value, dwarf_decode_lines_1, new_symbol) (dwarf2_fetch_die_loc_sect_off): Update. * dwarf2/loc.c (dwarf2_find_location_expression) (class dwarf_evaluate_loc_desc, rw_pieced_value) (dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval) (dwarf2_loc_desc_get_symbol_read_needs) (locexpr_describe_location_piece, locexpr_describe_location_1) (loclist_describe_location): Update. * dwarf2/index-write.c (write_debug_names): Update. * dwarf2/frame.c (dwarf2_build_frame_info): Update. * dtrace-probe.c (dtrace_process_dof): Update. * dbxread.c (read_dbx_symtab, dbx_end_psymtab) (process_one_symbol): Update. * ctfread.c (ctf_init_float_type, read_base_type): Update. * coffread.c (coff_symtab_read, enter_linenos, decode_base_type) (coff_read_enum_type): Update. * cli/cli-cmds.c (edit_command, list_command): Update. * buildsym.c (buildsym_compunit::finish_block_internal): Update. * breakpoint.c (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint, get_sal_arch): Update. * block.c (block_gdbarch): Update. * annotate.c (annotate_source_line): Update.
2020-03-29gdb: rename partial symtab expand functions of debug info readers using ↵Simon Marchi1-2/+2
legacy_psymtab As I am trying to understand the dynamic of partial_symtab::read_symtab and partial_symtab::expand_psymtab, I think that renaming these functions helps make it clear that they are effectively implementations of the partial_symtab::expand_psymtab method. gdb/ChangeLog: * dbxread.c (dbx_psymtab_to_symtab_1): Rename to... (dbx_expand_psymtab): ... this. (start_psymtab): Update. * mdebugread.c (psymtab_to_symtab_1): Rename to... (mdebug_expand_psymtab): ... this. (parse_partial_symbols): Update. (new_psymtab): Update. * xcoffread.c (xcoff_psymtab_to_symtab_1): Rename to... (xcoff_expand_psymtab): ... this. (xcoff_start_psymtab): Update.
2020-03-29gdb: rename partial_symtab::read_dependencies to expand_dependenciesSimon Marchi1-1/+1
This method calls partial_symtab::expand_psymtab on all dependencies of a psymtab. Given that there is also a partial_symtab::read_symtab method, I think it would be clearer to name this function expand_dependencies, rather than read_dependencies. gdb/ChangeLog: * psympriv.h (partial_symtab) <read_dependencies>: Rename to... <expand_dependencies>: ... this. * psymtab.c (partial_symtab::read_dependencies): Rename to... (partial_symtab::expand_dependencies): ... this. * dwarf2/read.c (dwarf2_include_psymtab) <expand_psymtab>: Update. (dwarf2_psymtab::expand_psymtab): Update. * dbxread.c (dbx_psymtab_to_symtab_1): Update. * mdebugread.c (psymtab_to_symtab_1): Update. * xcoffread.c (xcoff_psymtab_to_symtab_1): Update.
2020-03-29gdb: remove discard_psymtab functionSimon Marchi1-1/+1
This function does not add much value, compared to calling the method on the psymtab_storage object directly. gdb/ChangeLog: * psympriv.h (discard_psymtab): Remove. * dbxread.c (dbx_end_psymtab): Update. * xcoffread.c (xcoff_end_psymtab): Update.
2020-03-10gdb: Add support for tracking the DWARF line table is-stmt fieldAndrew Burgess1-0/+4
This commit brings support for the DWARF line table is_stmt field to GDB. The is_stmt field is used by the compiler when a single source line is split into multiple assembler instructions, especially if the assembler instructions are interleaved with instruction from other source lines. The compiler will set the is_stmt flag false from some instructions from the source lines, these instructions are not a good place to insert a breakpoint in order to stop at the source line. Instructions which are marked with the is_stmt flag true are a good place to insert a breakpoint for that source line. Currently GDB ignores all instructions for which is_stmt is false. This is fine in a lot of cases, however, there are some cases where this means the debug experience is not as good as it could be. Consider stopping at a random instruction, currently this instruction will be attributed to the last line table entry before this point for which is_stmt was true - as these are the only line table entries that GDB tracks. This can easily be incorrect in code with even a low level of optimisation. With is_stmt tracking in place, when stopping at a random instruction we now attribute the instruction back to the real source line, even when is_stmt is false for that instruction in the line table. When inserting breakpoints we still select line table entries for which is_stmt is true, so the breakpoint placing behaviour should not change. When stepping though code (at the line level, not the instruction level) we will still stop at instruction where is_stmt is true, I think this is more likely to be the desired behaviour. Instruction stepping is, of course, unchanged, stepping one instruction at a time, but we should now report more accurate line table information with each instruction step. The original motivation for this work was a patch posted by Bernd here: https://sourceware.org/ml/gdb-patches/2019-11/msg00792.html As part of that thread it was suggested that many issues would be resolved if GDB supported line table views, this isn't something I've attempted in this patch, though reading the spec, it seems like this would be a useful feature to support in GDB in the future. The spec is here: http://dwarfstd.org/ShowIssue.php?issue=170427.1 And Bernd gives a brief description of the benefits here: https://sourceware.org/ml/gdb-patches/2020-01/msg00147.html With that all said, I think that there is benefit to having proper is_stmt support regardless of whether we have views support, so I think we should consider getting this in first, and then building view support on top of this. The gdb.cp/step-and-next-inline.exp test is based off a test proposed by Bernd Edlinger in this message: https://sourceware.org/ml/gdb-patches/2019-12/msg00842.html gdb/ChangeLog: * buildsym-legacy.c (record_line): Pass extra parameter to record_line. * buildsym.c (buildsym_compunit::record_line): Take an extra parameter, reduce duplication in the line table, and record the is_stmt flag in the line table. * buildsym.h (buildsym_compunit::record_line): Add extra parameter. * disasm.c (do_mixed_source_and_assembly_deprecated): Ignore non-statement lines. * dwarf2/read.c (dwarf_record_line_1): Add extra parameter, pass this to the symtab builder. (dwarf_finish_line): Pass extra parameter to dwarf_record_line_1. (lnp_state_machine::record_line): Pass a suitable is_stmt flag through to dwarf_record_line_1. * infrun.c (process_event_stop_test): When stepping, don't stop at a non-statement instruction, and only refresh the step info when we land in the middle of a line's range. Also add an extra comment. * jit.c (jit_symtab_line_mapping_add_impl): Initialise is_stmt field. * record-btrace.c (btrace_find_line_range): Only record lines marked as is-statement. * stack.c (frame_show_address): Show the frame address if we are in a non-statement sal. * symmisc.c (dump_symtab_1): Print the is_stmt flag. (maintenance_print_one_line_table): Print a header for the is_stmt column, and include is_stmt information in the output. * symtab.c (find_pc_sect_line): Find lines marked as statements in preference to non-statements. (find_pcs_for_symtab_line): Prefer is-statement entries. (find_line_common): Likewise. * symtab.h (struct linetable_entry): Add is_stmt field. (struct symtab_and_line): Likewise. * xcoffread.c (arrange_linetable): Initialise is_stmt field when arranging the line table. gdb/testsuite/ChangeLog: * gdb.cp/step-and-next-inline.cc: New file. * gdb.cp/step-and-next-inline.exp: New file. * gdb.cp/step-and-next-inline.h: New file. * gdb.dwarf2/dw2-is-stmt.c: New file. * gdb.dwarf2/dw2-is-stmt.exp: New file. * gdb.dwarf2/dw2-is-stmt-2.c: New file. * gdb.dwarf2/dw2-is-stmt-2.exp: New file. * gdb.dwarf2/dw2-ranges-base.exp: Update line table pattern.
2020-01-26Consolidate partial symtab dependency readingTom Tromey1-28/+2
Most of the symbol readers have code to iterate over a partial symtabs dependencies, expanding each one and optionally printing a message. Now that the "second-stage" psymtab expansion is available as a method, these implementations can all be merged. This patch also changes a couple more warnings into assertions. gdb/ChangeLog 2020-01-26 Tom Tromey <tom@tromey.com> * xcoffread.c (xcoff_psymtab_to_symtab_1): Call read_dependencies. Add assert. * psymtab.c (partial_symtab::read_dependencies): New method. * psympriv.h (struct partial_symtab) <read_dependencies>: New method. * mdebugread.c (psymtab_to_symtab_1): Call read_dependencies. * dwarf2read.c (dwarf2_psymtab::expand_psymtab): Call read_dependencies. * dbxread.c (dbx_psymtab_to_symtab_1): Call read_dependencies. Add assert. Change-Id: I8151e05677794e90223edc1a4cb70f7f69137d46
2020-01-26Introduce partial_symtab::expand_psymtab methodTom Tromey1-4/+5
The symbol readers generally used two functions to expand a partial symtab: an outer function (now the "read_symtab" method), and an inner function, typically named something like "psymtab_to_symtab". This patch changes this second step to be a method on partial_symtab, and updates all the callers. For legacy_psymtab, a new function pointer member is introduced. This patch enables a subsequent cleanup. gdb/ChangeLog 2020-01-26 Tom Tromey <tom@tromey.com> * xcoffread.c (xcoff_psymtab_to_symtab_1): Change argument order. Call expand_psymtab. (xcoff_read_symtab): Call expand_psymtab. (xcoff_start_psymtab, xcoff_end_psymtab): Set legacy_expand_psymtab. * psympriv.h (struct partial_symtab) <expand_psymtab>: New method. (struct legacy_psymtab) <expand_psymtab>: Implement. <legacy_expand_psymtab>: New member. * mdebugread.c (mdebug_read_symtab): Call expand_psymtab. (parse_partial_symbols): Set legacy_expand_psymtab. (psymtab_to_symtab_1): Change argument order. Call expand_psymtab. (new_psymtab): Set legacy_expand_psymtab. * dwarf2read.h (struct dwarf2_psymtab) <expand_psymtab>: Declare. * dwarf2read.c (dwarf2_psymtab::read_symtab): Call expand_psymtab. (dwarf2_psymtab::expand_psymtab): Rename from psymtab_to_symtab_1. Call expand_psymtab. * dbxread.c (start_psymtab): Set legacy_expand_psymtab. (dbx_end_psymtab): Likewise. (dbx_psymtab_to_symtab_1): Change argument order. Call expand_psymtab. (dbx_read_symtab): Call expand_psymtab. * ctfread.c (struct ctf_psymtab) <expand_psymtab>: Declare. (ctf_psymtab::expand_psymtab): Rename from psymtab_to_symtab. (ctf_psymtab::read_symtab): Call expand_psymtab. Change-Id: Ic39a2d7aa7b424088d910b59dbd21271fa1c3430
2020-01-26Consolidate psymtab "Reading" messagesTom Tromey1-19/+1
Each symbol reader implemented its own "Reading..." messages, and most of them double-checked that a previously-expanded psymtab could not be re-read. This patch consolidates the message-printing, and changes these checks into asserts. gdb/ChangeLog 2020-01-26 Tom Tromey <tom@tromey.com> * xcoffread.c (xcoff_read_symtab): Remove prints. Add assert. * psymtab.c (psymtab_to_symtab): Print verbose "Reading" messages. * mdebugread.c (mdebug_read_symtab): Remove prints. * dwarf2read.c (dwarf2_psymtab::read_symtab): Remove prints. Add assert. * dbxread.c (dbx_read_symtab): Remove prints. Add assert. Change-Id: I795be9710d42708299bb7b44972cffd27aec9413
2020-01-26Introduce partial_symtab::read_symtab methodTom Tromey1-21/+22
This introduces a new partial_symtab::read_symtab method, and updates the symbol readers to subclass partial_symtab and implement this method. The old read_symtab and read_symtab_private members are removed. In practice, only DWARF and CTF are truly updated to take advantage of the new setup. The other symbol readers are less actively maintained, and so this patch also introduces a "legacy_psymtab", which essentially works the same way as the old partial_symtab. (Note that, without more knowledge of the interaction between these symbol readers, fixing this to remove the new (small) overhead is not trivial, because these readers copy the read_symtab pointer between partial symtabs.) gdb/ChangeLog 2020-01-26 Tom Tromey <tom@tromey.com> * xcoffread.c (this_symtab_psymtab, read_xcoff_symtab) (xcoff_psymtab_to_symtab_1, xcoff_read_symtab) (xcoff_start_psymtab, xcoff_end_psymtab, scan_xcoff_symtab): Use legacy_symtab. * stabsread.h (dbx_end_psymtab): Use legacy_symtab. * psymtab.c (psymtab_to_symtab): Call method. (dump_psymtab): Update. * psympriv.h (struct partial_symtab): Add virtual destructor. <read_symtab>: New method. (struct legacy_symtab): New. * mdebugread.c (mdebug_read_symtab): Use legacy_psymtab. (struct pst_map) <pst>: Now a legacy_psymtab. (parse_procedure, parse_partial_symbols, psymtab_to_symtab_1) (new_psymtab): Use legacy_psymtab. * dwarf2read.h (struct dwarf2_psymtab): New. (struct dwarf2_per_cu_data) <psymtab>: Use it. * dwarf2read.c (dwarf2_create_include_psymtab) (dwarf2_build_include_psymtabs, create_type_unit_group) (create_partial_symtab, process_psymtab_comp_unit_reader) (build_type_psymtabs_reader, build_type_psymtab_dependencies) (set_partial_user): Use dwarf2_psymtab. (dwarf2_psymtab::read_symtab): Rename from dwarf2_read_symtab. (psymtab_to_symtab_1, process_full_comp_unit) (process_full_type_unit, dwarf2_ranges_read) (dwarf2_get_pc_bounds, psymtab_include_file_name) (dwarf_decode_lines): Use dwarf2_psymtab. * dwarf-index-write.c (psym_index_map): Use dwarf2_psymtab. (add_address_entry_worker, write_one_signatured_type) (recursively_count_psymbols, recursively_write_psymbols) (write_one_signatured_type, psyms_seen_size, write_gdbindex) (write_debug_names): Likewise. * dbxread.c (struct header_file_location): Take a legacy_psymtab. <pst>: Now a legacy_psymtab. (find_corresponding_bincl_psymtab): Return a legacy_psymtab. (read_dbx_symtab, start_psymtab, dbx_end_psymtab) (dbx_psymtab_to_symtab_1, read_ofile_symtab): Use legacy_psymtab. * ctfread.c (struct ctf_psymtab): New. (ctf_start_symtab, ctf_end_symtab, psymtab_to_symtab): Take a ctf_psymtab. (ctf_psymtab::read_symtab): Rename from ctf_read_symtab. (create_partial_symtab): Return a ctf_psymtab. (scan_partial_symbols): Update. Change-Id: Ia57a828786867d6ad03200af8f996f48ed15285e
2020-01-26Turn start_psymtab_common into a constructorTom Tromey1-5/+2
This turns start_psymtab_common into a constructor, and then changes the callers to use "new" directly. This completes the psymtab allocation transition -- now it is possible for symbol readers to subclass struct partial_symtab. gdb/ChangeLog 2020-01-26 Tom Tromey <tom@tromey.com> * xcoffread.c (xcoff_start_psymtab): Use new. * psymtab.c (partial_symtab::partial_symtab): New constructor, renamed from start_psymtab_common. * psympriv.h (struct partial_symtab): Add new constructor. (start_psymtab_common): Don't declare. * mdebugread.c (parse_partial_symbols): Use new. * dwarf2read.c (create_partial_symtab): Use new. * dbxread.c (start_psymtab): Use new. * ctfread.c (create_partial_symtab): Use new. Change-Id: I5a0217bcb52bcfa442559771954bb66bd9ccbf02
2020-01-26Change allocate_psymtab to be a constructorTom Tromey1-1/+1
This is the next step in getting the symbol readers to allocate psymtabs themselves: change allocate_psymtab to be an ordinary constructor, and then use "new" at the previous call sites. Note that this doesn't get us all the way -- start_psymtab_common is still allocating a partial symtab. gdb/ChangeLog 2020-01-26 Tom Tromey <tom@tromey.com> * xcoffread.c (xcoff_end_psymtab): Use new. * psymtab.c (start_psymtab_common): Use new. (partial_symtab::partial_symtab): Rename from allocate_psymtab. Update. * psympriv.h (struct partial_symtab): Add parameters to constructor. Don't inline. (allocate_psymtab): Don't declare. * mdebugread.c (new_psymtab): Use new. * dwarf2read.c (dwarf2_create_include_psymtab): Use new. * dbxread.c (dbx_end_psymtab): Use new. Change-Id: Iffeae64c925050b90b9916cbc36e15b26ff42226
2020-01-26Change some psymtab fields to boolTom Tromey1-1/+1
This changes a few fields in partial_symtab to have type bool. gdb/ChangeLog 2020-01-26 Tom Tromey <tom@tromey.com> * xcoffread.c (xcoff_psymtab_to_symtab_1): Update. * psymtab.c (psym_print_stats): Update. * psympriv.h (struct partial_symtab) <readin, psymtabs_addrmap_supported, anonymous>: Now bool. * mdebugread.c (psymtab_to_symtab_1): Update. * dwarf2read.c (create_type_unit_group, create_partial_symtab) (build_type_psymtabs_reader, psymtab_to_symtab_1) (process_full_comp_unit, process_full_type_unit): Update. * dbxread.c (dbx_psymtab_to_symtab_1): Update. * ctfread.c (psymtab_to_symtab): Update. Change-Id: I206761d083493589049ea0bc785ed6542339234d
2020-01-23gdb: introduce objfile text_section_offset and data_section_offset methodsSimon Marchi1-6/+6
The pattern objfile->section_offsets[SECT_OFF_TEXT (objfile)] ... appears very often, to get the offset of the text section of an objfile. I thought it would be more readable to write it as: objfile->text_section_offset () ... so I added this method and used it where possible. I also added data_section_offset, although it is not used as much. gdb/ChangeLog: * objfiles.h (ALL_OBJFILE_OSECTIONS): Move up. (SECT_OFF_DATA): Likewise. (SECT_OFF_RODATA): Likewise. (SECT_OFF_TEXT): Likewise. (SECT_OFF_BSS): Likewise. (struct objfile) <text_section_offset, data_section_offset>: New methods. * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Use objfile::text_section_offset. * coff-pe-read.c (add_pe_forwarded_sym): Likewise. * coffread.c (coff_symtab_read): Likewise. (enter_linenos): Likewise. (process_coff_symbol): Likewise. * ctfread.c (get_objfile_text_range): Likewise. * dtrace-probe.c (dtrace_probe::get_relocated_address): Use objfile::data_section_offset. * dwarf2-frame.c (execute_cfa_program): Use objfile::text_section_offset. (dwarf2_frame_find_fde): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (create_addrmap_from_aranges): Likewise. (dw2_find_pc_sect_compunit_symtab): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. (read_lexical_block_scope): Likewise. (read_call_site_scope): Likewise. (dwarf2_rnglists_process): Likewise. (dwarf2_ranges_process): Likewise. (dwarf2_ranges_read): Likewise. (dwarf_decode_lines_1): Likewise. (new_symbol): Likewise. (dwarf2_fetch_die_loc_sect_off): Likewise. (dwarf2_per_cu_text_offset): Likewise. * hppa-bsd-tdep.c (hppabsd_find_global_pointer): Likewise. * hppa-tdep.c (read_unwind_info): Likewise. * ia64-tdep.c (ia64_find_unwind_table): Likewise. * psympriv.h (struct partial_symtab): Likewise. * psymtab.c (find_pc_sect_psymtab): Likewise. * solib-svr4.c (enable_break): Likewise. * stap-probe.c (relocate_address): Use objfile::data_section_offset. * xcoffread.c (enter_line_range): Use objfile::text_section_offset. (read_xcoff_symtab): Likewise.
2020-01-13Dwarf 5: Handle debug_str_offsets and indexed attributes that have base offsets.Ali Tamur1-0/+1
* Process debug_str_offsets section. Handle DW_AT_str_offsets_base attribute and keep the value in dwarf2_cu. * Make addr_base field in dwarf2_cu optional to disambiguate 0 value (absent or present and 0). * During parsing, there is no guarantee that DW_AT_str_offsets_base and DW_AT_rnglists_base fields will be processed before the attributes that need those values for correct computation. So make two passes, on the first one mark the attributes that depend on *_base attributes and process only the others. On the second pass, only process the attributes that are marked on the first pass. * For string attributes, differentiate between addresses that directly point to a string and those that point to an offset in debug_str_offsets section. * There are now two attributes, DW_AT_addr_base and DW_AT_GNU_addr_base to read address offset base. Likewise, there are two attributes, DW_AT_rnglists_base and DW_AT_GNU_ranges_base to read ranges base. Since there is no guarantee which ones the compiler will generate, create helper functions to handle all cases. Tested with CC=/usr/bin/gcc (version 8.3.0) against master branch (also with -gsplit-dwarf and -gdwarf-4 flags) and there was no increase in the set of tests that fails. (gdb still cannot debug a 'hello world' program with DWARF 5, so for the time being, this is all we care about). This is part of an effort to support DWARF-5 in gdb.
generated by cgit v1.1 at 2024-11-21 22:28:03 +0000