| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* dbxread.c (read_dbx_symtab): Use L_SET as bfd_seek arg.
(elfstab_build_psymtabs): staboffset and stabstroffset args are
file_ptr's.
* dwarfread.c (struct dwfinfo): Convert dbfoff, lnfoff to file_ptr.
(scan_compilation_units): Punt unused filename arg. dbfoff,
lnoffset, and curlnoffset are file_ptr's now.
(dwarf_build_psymtabs): Drop desc and filename args; use
objfile. dbfoff and lnoffset are file_ptr's now.
(read_ofile_symtab): foffset is now file_ptr. Use L_SET in bfd_seek.
* elfread.c (struct elfinfo): dboffset and lnoffset are file_ptr's.
(elf_symfile_read): Skip desc and filename args to
dwarf_build_psymtabs. Pass file_ptr's to elfstab_build_psymtabs.
* gdb-stabs.h: Use file_ptr rather than off_t.
* mipsread.c (fixup_symtab): f_ptr is a file_ptr. Re-enable
compile-time debug check that someone turned off as "unused".
(read_the_mips_symtab): st_filptr is a file_ptr. Fix bfd_seek call.
* symfile.h: Update dwarf_build_psymtabs and
elfstab_build_psymtabs prototypes.
* xcoffread.c (init_stringtab, init_lineno, xcoff_symfile_read):
Use file_ptr offsets. bfd_seeks use L_SET.
|
|
* m68k-stub.c: Remove a few extraneous ANSI-isms.
* remote-nindy.c (nindy_prepare_to_store): Only fetch regs if
they aren't already there.
* remote-vx.c (vx_prepare_to_store): Ditto.
* xcoffread.c: Surround forward struct defns with #ifdef __STDC__.
|
|
* breakpoint.c (fixup_breakpoints): Re-kludge to IBM6000_TARGET.
* buildsym.c, rs6000-xdep.c, rs6000-tdep.c, tm-rs6000.h,
xcoffexec.c, xcoffread.c: Rename aixcoff to xcoff everywhere.
* printcmd.c (print_frame_args): Remove an RS/6000 dependency.
* stabsread.c (define_symbol): Remove RS/6000 dependencies.
* tm-rs6000.h (ATTACH_DETACH): Remove: host-dependent.
(PTRACE_ATTACH, PTRACE_DETACH): Remove: host-dep.
(NO_SINGLE_STEP): Add, target-dependent.
(loadinfotextindex): Lowercase, remove "aix_".
* xm-rs6000.h: Add <sys/ptrace.h> for infptrace.c.
(NO_SINGLE_STEP): Remove, target-dependent.
* xcoffexec.c (vmap_symtab): Cleanup #if 0'd code.
* xcoffread.c: Only build file if RS/6000 native GDB.
(build_function_symbol): Remove #if 0'd code.
* rs6000-tdep.c: Cleanup. Add static fn protos.
Use CORE_ADDR for addresses throughout. Make void fns void.
(pop_dummy_frame): Add FIXME about bogosity of design here.
(rs6000_struct_return_address): Ditto.
(frameless_function_invocation, frame_get_cache_fsr,
frame_initial_stack_address, xcoff_relocate_symtab,
xcoff_init_loadinfo, free_loadinfo, xcoff_add_toc_to_loadinfo,
add_text_to_loadinfo, find_toc_address): Move from xdep file.
Use CORE_ADDRs. Change identifiers to lowercase.
* rs6000-xdep.c: Make whole file conditional on native RS/6000,
supplying dummy routines if non-native. Add prototype for
static exec_one_dummy_insn. Move a mess of functions to
rs6000-tdep.c (as above). Remove #if 0'd code.
* config/rs6000.mh (XDEPFILES): Move xcoffexec.o to target side.
(XM_CLIBS): Add -lm to circumvent AIX 3.2 libc ldexp bug.
* config/rs6000.mt (TDEPFILES): Adopt xcoffexec.o.
|
|
* dwarfread.c (struct_type): In absence of AT_byte_size for
bitfield, use size of object of member's type for the size of
the anonymous object containing the bit field.
* dwarfread.c (completedieinfo): Set has_at_byte_size when
an AT_byte_size attribute is seen.
* mipsread.c (psymtab_to_symtab_1): Fix misspelled cast to
union aux_ext (was aux_ent).
* i386-pinsn.c (print_insn): Cast 2'nd arg to read_memory from
unsigned char* to char*, for Lucid compiler.
* i386-tdep.c (codestream_fill): Fix cast of 2'nd arg to read_memory
to be correct type (from unsigned char* to char*).
* valprint.c (type_print_derivation_info): Minor tweak to placement
of commas in derived class printing.
* xcoffread.c (builtin_type): Fix misspelling in fatal message.
|
|
* Makefile.in (SFILES_MAINDIR): Add stabsread.c
* Makefile.in (OBS): Add stabsread.o
* Makefile.in (stabsread.o): Add build rule.
* stabsread.c, stabsread.h: New files.
* buildsym.c: Split out stabs specific support to stabsread.c.
* buildsym.h: Split out stabs specific support to stabsread.h.
* dbxread.c (stabsread.h): Include
* dbxread.c (dbx_new_init): Call stabsread_new_init.
* dbxread.c (dbx_psymtab_to_symtab_1): Call stabsread_init.
* dbxread.c (read_ofile_symtab): Call end_stabs.
* dbxread.c (process_one_symbol): Call end_stabs and start_stabs.
* dbxread.c (elfstab_build_psymtabs): Call stabsread_new_init.
* dwarfread.c (psymtab_to_symtab_1): Call buildsym_init, add
really_free_pendings to cleanups.
* elfread.c (elf_new_init): Call stabsread_new_init.
* gdbtypes.c: Small changes to maintenance commands.
* mipsread.c (stabsread.h): Include.
* mipsread.c (psymtab_to_symtab_1): Call end_stabs.
* xcoffread.c (stabsread.h): Include.
* xcoffread.c (global_stabs): Remove redundant def.
* xcoffread.c (read_xcoff_symtab): Call start_stabs and end_stabs.
|
|
|
|
|
|
single `addr' or `offset'. This makes Solaris-2 support work, and
permits better VxWorks (and maybe xcoff) support later. See ChangeLog.
|
|
core.c, cplus-dem.c, dbxread.c, dwarfread.c, elfread.c, environ.c,
eval.c, findvar.c, gdbtypes.c, hppabsd-tdep.c, hppahpux-tdep.c,
i386-tdep.c, ieee-float.c, infcmd.c, inflow.c, infptrace.c,
infrun.c, m2-exp.y, mipsread.c, objfiles.c, parse.c, procfs.c,
putenv.c, remote-mm.c, remote-vx.c, solib.c, sparc-tdep.c,
sparc-xdep.c, stack.c, symfile.c, symtab.c, symtab.h, target.c,
tm-i386v.h, tm-sparc.h, utils.c, valarith.c, valops.c, valprint.c,
values.c, xcoffread.c:
Remove "(void)" casts from function calls where the return value
is ignored, in accordance with GNU coding standards.
|
|
tokens with embedded whitespace, such as C++ demangled names.
* defs.h (demangle_and_match, strcmp_iw, skip_quoted): Prototypes.
* main.c (gdb_completer_quote_characters): Add global variable.
* main.c (symbol_completion_function): Total rewrite for C++
demangled name handling.
* main.c (skip_quoted): New function.
* main.c (main): Set rl_completer_quote_characters.
* symmisc.c (dump_symtab): Print source language for symtab.
* symtab.c (expensive_mangler): Add prototype and function.
* symtab.c (completion_list_add_symbol): Total rewrite for new
C++ demangled name handling.
* symtab.c (lookup_symbol): Check for demangled C++ symbol first,
other changes for demangled C++ symbol handling.
* symtab.c (lookup_demangled_block_symbol): Use demangle_and_match.
* symtab.c (lookup_demangled_partial_symbol): Use demangle_and_match.
* symtab.c (decode_line_1): Recognize C++ demangled names on input.
* symtab.c (completion_list_add_symbol): Total rewrite for new
C++ demangled name handling.
* symtab.c (expensive_mangler): New function.
* utils.c (strcmp_iw, demangle_and_match): New functions.
* xcoffread.c (aixcoff_symfile_read): Fix prototype.
|
|
without masking, since it is signed and will later be compared
against signed quantities. The right fix is probably to make
it all unsigned, but this is a small, safe fix for this release.
FIXME -- make the real change sometime soon.
(Imported from progressive.)
|
|
functions which handle overwriting of forward-referenced types
for stabs file reading.
(lookup_{reference,pointer,function}_type): These just call
the make_*_type functions with a null storage alloc parameter.
* gdbtypes.h (make_{reference,pointer,function}_type): Declare.
* xcoffread.c (smash_to_pointer_type): Remove, no longer used.
* buildsym.c (dbx_lookup_type): Zero result for (-1,-1) arg.
(dbx_alloc_type): Make it easier to understand. No funct change.
(define_symbol: 't'): Don't put the typedef name into the name of
the struct, union, or enum. Bugfix.
(read_type: '*', '&', 'f'): Add comments. Use make_XXX_type
routines to properly handle overwriting preallocated types so that
forward references will work.
(read_enum_type): Force enum values to file scope, due to bug in
Sun compiler output. FIXME, fix later.
Remove unused header_file_prev_index mechanism. It was already
obsolete in gdb-3.5. These comments appeared in 3.5:
/* This code was used before I knew about the instance codes.
My first hypothesis is that it is not necessary now
that instance codes are handled. */
* dbxread.c (add_new_header_file): Remove header_file_prev_index.
* buildsym.h: Remove it and prev_index that saves it.
* buildsym.c (push_subfile, pop_subfile, start_symtab): Remove it.
* solib.c (special_symbol_handling): When called from core files,
must set up debug_addr. Don't print error messages, just return.
* symmisc.c (print_symbol): Less ascii diarrhea for enums, please.
|
|
* sparc-tdep.c (supply_gregset, fill_gregset, supply_fpregset,
fill_gregset): New functions for SVR4 /proc support.
|
|
* tm-rs6000.h, xcoffexec.c, xcoffread.c, xm-rs6000.h:
Merge in more patches for rs6000 from Metin Ozisik.
* utils.c: Fix typo in comment.
|
|
* minsyms.c (iterate_over_msymbols): Remove; clunky and slow.
* symfile.h, symtab.h (iterate_over_msymbols): Remove prototype
* coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS.
(patch_opaque_types): Avoid dummy args and result.
* objfiles.c (have_partial_symbols, have_full_symbols,
have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify.
(iterate_over_objfiles, iterate_over_symtabs,
iterate_over_psymtabs): Remove, clunky and slow.
* objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS,
ALL_PSYMTABS, and ALL_MSYMBOLS macros.
* symmisc.c (dump_symtab, dump_psymtab, dump_msymbols,
dump_objfile): Remove dummy args and results. Move filename
comparisons to callers.
(printsyms_command, printpsyms_command, printmsyms_command,
printobjfiles_command): iterate_over_* => ALL_*. Compare filenames.
* symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab,
lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info,
list_symbols, make_symbol_completion_list): Replace explicit
iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS.
Eliminate Dijkstra flag crap, break out of loops with gotos.
(lookup_symtab_1): Protect '/' tests from short filenames.
(cplus_mangled_symbol): Move inline into lookup_symbol.
* xcoffexec.c (relocate_objfile_msymbols): Remove poor hack.
(relocate_minimal_symbol): Move inline to vmap_symtab.
(vmap_symtab): Replace iteration with ALL_OBJFILES,
iterate_over_msymbols with ALL_MSYMBOLS.
Misc cleanup prior to release.
* dwarfread.c (dwarf_build_psymtabs): Remove mainline test.
* mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused.
* mipsread.c: Add prototypes for all static functions.
* symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab,
dump_blockvector, dump_block, dump_addrchass, dump_namespace,
dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused.
* xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab,
dump_blockvector, dump_block, dump_addrchass, dump_namespace,
dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd
unused copy!
* buildsym.c (define_symbol): Handle global register variables
(from Pierre Willard). Complain if register numbers are too large.
|
|
|
|
basis. See comments in objfiles.h and details in ChangeLog. Also remove
redundant definitions of FRAME_CHAIN_VALID from most of the tm-* files and
use a default definition in frame.h.
|
|
elfread.c (coff_symfile_finish): Add function, prototype, and
add to the xxxx_sym_fns struct for each file type. Also reformat
the xxxx_sym_fns vector to a standard format and add comments.
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c,
elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read):
Pass pointer to struct objfile rather than pointer to sym_fns.
Change references inside each function accordingly. Allocate any
symbol file specific info in the per-objfile memory region.
* dbxread.c (free_and_init_header_files): Break function into
free_header_files(), called from dbx_symfile_finish(), and
init_header_files(), called from dbx_new_init().
* dbxread.c (dbx_new_init): Move deallocation things to new
dbx_symfile_finish function.
* elfread.c (elf_new_init): Call buildsym_new_init().
* objfiles.c (free_objfile): Call the appropriate symfile_finish()
routine for the objfile before deallocating other stuff.
* sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg.
* symfile.h: Move struct sym_fns to before struct objfile def.
Add sym_finish function pointer and change prototypes of other
function pointers to reflect passing struct objfile pointer rather
than struct sym_fns pointer.
* symfile.c: Remove now obsolete symtab_fns pointer.
* symfile.c (symfile_init): Renamed to find_sym_fns, and now only
locates the correct sym_fns struct for the given objfile.
* symfile.c (syms_from_objfile, symbol_file_add): Restructured
for better support of mapped symbol tables.
* symfile.c (symbol_file_command): Remove obsolete code using
symfile_fns.
* symfile.h: Remove duplicate declarations for symfile_objfile,
entry_point, and object_files.
* target.c (target_info): Compare symfile_objfile to NULL.
* xcoffread.c (aixcoff_new_init): Move deallocation stuff to
aixcoff_symfile_finish().
|
|
as well as DEBUG. Fails to compile otherwise.
|
|
|
|
* All GDB files that #include defs.h: Removed stdio.h.
(defs.h): #include stdio.h.
This has been tested by building GDBs for all targets hosted on Sun4.
None of the build problems were related to stdio.h inclusion. (n.b.
many configurations don't build for other reasons.)
|
|
|
|
|
|
|
|
* symmisc.c, xcoffread.c: Move debug functions to symmisc.c.
|
|
* minsyms.c (install_minimal_symbols): Add bunches to any
existing minsyms in the objfile. Avoid extra mallocation
by working directly in the obstack. Remove ignored `mainline' parm.
* coffread.c, dbxread.c, elfread.c, mipsread.c, solib.c, symtab.h,
xcoffread.c: Change all callers.
* FIXME: We should be able to eliminate MAINLINE from all the
symbol readers now, with a small bit of work.
* valops.c, value.h: Lint.
* remote-vx.c: Add missing break; statement. Bugfix by
Michael Sclafani, <sclafani@src.dec.com>.
|
|
will make ChangeLog entries for all of them.
|
|
this file does not exist, and not including it hasn't seemed to
cause problems.
main.c: Use the proper enum's in the options structure initialization;
the Apollo compiler chokes on this.
|
|
to xm-sysv4.h. Split OPCODE_DIR into OPCODE_DIR1 and OPCODE_DIR2
to reflect actual locations of opcode files, so TAGS target will
be buildable.
i386-tdep.c: Change an erroneous 'm68k' reference to 'i386'.
i386-tdep.c (supply_fpregset, fill_fpregset): Remove m68k code.
m68k-tdep.c (supply_fpregset, fill_fpregset): Fix array
dereferencing to access the correct elements.
valops.c (value_addr): Declare return type of external func value_copy().
xcoffread.c: Undefine next_symbol_text before redefining it.
|
|
symbol table entry number. (From Metin Ozisik.)
|
|
* xcoffread.c: internalcoff.h ->coff/internal.c,
coff-rs6000.h ->coff/rs6000.h
* mipsread.c: coff-mips.h ->coff/mips.h
* elfread.c: elf-common.h ->elf/common.h
elf-external.h ->elf/external.h,
elf-internal.h ->elf/internal.h
* dwarfread.c dwarf.h ->elf/dwarf.h
* dbxread.c: aout64.h ->aout/aout64.h
stab.gnu.h ->aout/stab_gnu.h
* coffread.c: internalcoff.h ->coff/internal.h
* buildsym.c: stab.gnu.h ->aout/stab_gnu.h
* depend Updated to take the above into account.
|
|
|
|
* param-no-tm.h: Change users to define TM_FILE_OVERRIDE instead.
* param.h, param-no-tm.h: Removed.
* Update copyrights in all changed files.
* dbxread.c, dwarfread.c, inflow.c, infrun.c, m2-exp.y, putenv.c,
solib.c, symtab.h, tm-umax.h, valprint.c: Lint.
* tm-convex.h, tm-hp300hpux.h, tm-merlin.h, tm-sparc.h,
xm-merlin.h: Avoid host include files in target descriptions.
* getpagesize.h: Removed, libiberty copes now.
|
|
convert to use of variable arg count concat() in libiberty.
|
|
|
