| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
|
|
This patch renames symbols that happen to have names which are
reserved keywords in C++.
Most of this was generated with Tromey's cxx-conversion.el script.
Some places where later hand massaged a bit, to fix formatting, etc.
And this was rebased several times meanwhile, along with re-running
the script, so re-running the script from scratch probably does not
result in the exact same output. I don't think that matters anyway.
gdb/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
gdb/gdbserver/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
|
|
This completes the constification of the struct varobj pointers in the
lang_varobj_ops interface partially done in
b09e2c591f9221d865bfe8425990a6bf9fab24e3. As suggested by Pedro,
varobj_get_path_expr casts away the const to assign the "mutable" struct
member.
gdb/ChangeLog:
* ada-varobj.c (ada_name_of_child): Constify parent.
(ada_path_expr_of_child): Same.
(ada_value_of_child): Same.
(ada_type_of_child): Same.
* c-varobj.c (c_is_path_expr_parent): Same.
(c_describe_child): Same.
(c_name_of_child): Same.
(c_value_of_child): Same.
(c_type_of_child): Same.
(cplus_number_of_children): Same.
(cplus_describe_child): Constify var.
(cplus_name_of_child): Constify parent.
(cplus_value_of_child): Same.
(cplus_type_of_child): Same.
* jv-varobj.c (java_name_of_child): Same.
(java_value_of_child): Same.
(java_type_of_child): Same.
* varobj.c (value_of_child): Same.
(varobj_default_is_path_expr_parent): Constify var, parent and return
value.
(varobj_get_path_expr): Constify var, modify path_expr through
mutable_var.
(install_new_value): Constify parent.
(value_of_child): Constify parent.
* varobj.h (struct varobj): Constify parent.
(struct lang_varobj_ops): Constify name_of_child, value_of_child and
type_of_child.
(varobj_get_path_expr): Constify var.
(varobj_get_path_expr_parent): Constify var and return value.
|
|
gdb/ChangeLog:
* varobj.c (varobj_delete): Fix comment.
|
|
gdb/ChangeLog:
* varobj.c (create_child): Modify comment.
|
|
To make it clear that some functions should not modify the variable
object, this patch adds the const qualifier where it makes sense to some
struct varobj * parameters. Most getters should take a const pointer to
guarantee they don't modify the object.
Unfortunately, I couldn't add it to some callbacks (such as name_of_child).
In the C implementation, they call c_describe_child, which calls
varobj_get_path_expr. varobj_get_path_expr needs to modify the object in
order to cache the computed value. It therefore can't take a const
pointer, and it affects the whole call chain. I suppose that's where you
would use a "mutable" in C++.
I did that to make sure there was no other cases like the one fixed in
the previous patch. I don't think it can hurt.
gdb/ChangeLog:
* ada-varobj.c (ada_number_of_children): Constify struct varobj *
parameter.
(ada_name_of_variable): Same.
(ada_path_expr_of_child): Same.
(ada_value_of_variable): Same.
(ada_value_is_changeable_p): Same.
(ada_value_has_mutated): Same.
* c-varobj.c (varobj_is_anonymous_child): Same.
(c_is_path_expr_parent): Same.
(c_number_of_children): Same.
(c_name_of_variable): Same.
(c_path_expr_of_child): Same.
(get_type): Same.
(c_value_of_variable): Same.
(cplus_number_of_children): Same.
(cplus_name_of_variable): Same.
(cplus_path_expr_of_child): Same.
(cplus_value_of_variable): Same.
* jv-varobj.c (java_number_of_children): Same.
(java_name_of_variable): Same.
(java_path_expr_of_child): Same.
(java_value_of_variable): Same.
* varobj.c (number_of_children): Same.
(name_of_variable): Same.
(is_root_p): Same.
(varobj_ensure_python_env): Same.
(varobj_get_objname): Same.
(varobj_get_expression): Same.
(varobj_get_display_format): Same.
(varobj_get_display_hint): Same.
(varobj_has_more): Same.
(varobj_get_thread_id): Same.
(varobj_get_frozen): Same.
(dynamic_varobj_has_child_method): Same.
(varobj_get_gdb_type): Same.
(is_path_expr_parent): Same.
(varobj_default_is_path_expr_parent): Same.
(varobj_get_language): Same.
(varobj_get_attributes): Same.
(varobj_is_dynamic_p): Same.
(varobj_get_child_range): Same.
(varobj_value_has_mutated): Same.
(varobj_get_value_type): Same.
(number_of_children): Same.
(name_of_variable): Same.
(check_scope): Same.
(varobj_editable_p): Same.
(varobj_value_is_changeable_p): Same.
(varobj_floating_p): Same.
(varobj_default_value_is_changeable_p): Same.
* varobj.h (struct lang_varobj_ops): Consitfy some struct varobj *
parameters.
(varobj_get_objname): Constify struct varobj * parameter.
(varobj_get_expression): Same.
(varobj_get_thread_id): Same.
(varobj_get_frozen): Same.
(varobj_get_child_range): Same.
(varobj_get_display_hint): Same.
(varobj_get_gdb_type): Same.
(varobj_get_language): Same.
(varobj_get_attributes): Same.
(varobj_editable_p): Same.
(varobj_floating_p): Same.
(varobj_has_more): Same.
(varobj_is_dynamic_p): Same.
(varobj_ensure_python_env): Same.
(varobj_default_value_is_changeable_p): Same.
(varobj_value_is_changeable_p): Same.
(varobj_get_value_type): Same.
(varobj_is_anonymous_child): Same.
(varobj_value_get_print_value): Same.
(varobj_default_is_path_expr_parent): Same.
|
|
It seems like different languages are doing this differently (e.g.
C and Ada). For C, var->path_expr is set inside c_path_expr_of_child.
The next time the value is requested, is it therefore not recomputed.
Ada does not set this field, but just returns the value. Since the field
is never set, the value is recomputed every time it is requested.
This patch makes it so that path_expr_of_child's only job is to compute
the path expression, not save/cache the value. The field is set by the
varobj common code.
gdb/ChangeLog:
* varobj.c (varobj_get_path_expr): Set var->path_expr.
* c-varobj.c (c_path_expr_of_child): Set local var instead of
child->path_expr.
(cplus_path_expr_of_child): Same.
|
|
varobj_get_expression returns an allocated string, which must be freed
by the caller.
gdb/ChangeLog:
* mi-cmd-var.c (print_varobj): Free varobj_get_expression
result.
(mi_cmd_var_info_expression): Same.
* varobj.c (varobj_get_expression): Mention in the comment that
the result must by freed by the caller.
|
|
varobj_get_type and type_to_string return an allocated string, which is
not freed at a couple of places.
New in v2:
* Rename char * type to type_name.
* Free in all cases in update_type_if_necessary.
gdb/ChangeLog:
* mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
varobj_get_type.
(varobj_update_one): Same.
* varobj.c (update_type_if_necessary): Free curr_type_str and
new_type_str.
(varobj_get_type): Specify in comment that the result needs to be
freed by the caller.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
defs.h includes utils.h, and utils.h includes exceptions.h. All GDB
.c files include defs.h as their first line, so no file other than
utils.h needs to include exceptions.h. This commit removes all such
inclusions.
gdb/ChangeLog:
* ada-lang.c: Do not include exceptions.h.
* ada-valprint.c: Likewise.
* amd64-tdep.c: Likewise.
* auto-load.c: Likewise.
* block.c: Likewise.
* break-catch-throw.c: Likewise.
* breakpoint.c: Likewise.
* btrace.c: Likewise.
* c-lang.c: Likewise.
* cli/cli-cmds.c: Likewise.
* cli/cli-interp.c: Likewise.
* cli/cli-script.c: Likewise.
* completer.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-support.c: Likewise.
* cp-valprint.c: Likewise.
* darwin-nat.c: Likewise.
* dwarf2-frame-tailcall.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* event-top.c: Likewise.
* f-valprint.c: Likewise.
* frame-unwind.c: Likewise.
* frame.c: Likewise.
* gdbtypes.c: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* guile/scm-auto-load.c: Likewise.
* guile/scm-breakpoint.c: Likewise.
* guile/scm-cmd.c: Likewise.
* guile/scm-frame.c: Likewise.
* guile/scm-lazy-string.c: Likewise.
* guile/scm-param.c: Likewise.
* guile/scm-symbol.c: Likewise.
* guile/scm-type.c: Likewise.
* hppa-hpux-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* inf-loop.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* interps.c: Likewise.
* interps.h: Likewise.
* jit.c: Likewise.
* linespec.c: Likewise.
* linux-nat.c: Likewise.
* linux-thread-db.c: Likewise.
* m32r-rom.c: Likewise.
* main.c: Likewise.
* memory-map.c: Likewise.
* mi/mi-cmd-break.c: Likewise.
* mi/mi-cmd-stack.c: Likewise.
* mi/mi-interp.c: Likewise.
* mi/mi-main.c: Likewise.
* monitor.c: Likewise.
* nto-procfs.c: Likewise.
* objc-lang.c: Likewise.
* p-valprint.c: Likewise.
* parse.c: Likewise.
* ppc-linux-tdep.c: Likewise.
* printcmd.c: Likewise.
* probe.c: Likewise.
* python/py-auto-load.c: Likewise.
* python/py-breakpoint.c: Likewise.
* python/py-cmd.c: Likewise.
* python/py-finishbreakpoint.c: Likewise.
* python/py-frame.c: Likewise.
* python/py-framefilter.c: Likewise.
* python/py-function.c: Likewise.
* python/py-gdb-readline.c: Likewise.
* python/py-inferior.c: Likewise.
* python/py-infthread.c: Likewise.
* python/py-lazy-string.c: Likewise.
* python/py-linetable.c: Likewise.
* python/py-param.c: Likewise.
* python/py-prettyprint.c: Likewise.
* python/py-symbol.c: Likewise.
* python/py-type.c: Likewise.
* python/py-value.c: Likewise.
* python/python-internal.h: Likewise.
* python/python.c: Likewise.
* record-btrace.c: Likewise.
* record-full.c: Likewise.
* regcache.c: Likewise.
* remote-fileio.c: Likewise.
* remote-mips.c: Likewise.
* remote.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* rs6000-nat.c: Likewise.
* skip.c: Likewise.
* solib-darwin.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-frv.c: Likewise.
* solib-ia64-hpux.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* solib.c: Likewise.
* spu-tdep.c: Likewise.
* stack.c: Likewise.
* stap-probe.c: Likewise.
* symfile-mem.c: Likewise.
* symmisc.c: Likewise.
* target.c: Likewise.
* thread.c: Likewise.
* top.c: Likewise.
* tracepoint.c: Likewise.
* tui/tui-interp.c: Likewise.
* typeprint.c: Likewise.
* utils.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* windows-nat.c: Likewise.
* xml-support.c: Likewise.
|
|
* varobj.c (_initialize_varobj): Move to the end of file.
|
|
This commit includes string.h in common-defs.h and removes all other
inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include string.h.
* aarch64-tdep.c: Do not include string.h.
* ada-exp.y: Likewise.
* ada-lang.c: Likewise.
* ada-lex.l: Likewise.
* ada-typeprint.c: Likewise.
* ada-valprint.c: Likewise.
* aix-thread.c: Likewise.
* alpha-linux-tdep.c: Likewise.
* alpha-mdebug-tdep.c: Likewise.
* alpha-nat.c: Likewise.
* alpha-osf1-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* alphanbsd-tdep.c: Likewise.
* amd64-dicos-tdep.c: Likewise.
* amd64-linux-tdep.c: Likewise.
* amd64-nat.c: Likewise.
* amd64-sol2-tdep.c: Likewise.
* amd64fbsd-tdep.c: Likewise.
* amd64obsd-tdep.c: Likewise.
* arch-utils.c: Likewise.
* arm-linux-nat.c: Likewise.
* arm-linux-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* arm-wince-tdep.c: Likewise.
* armbsd-tdep.c: Likewise.
* armnbsd-nat.c: Likewise.
* armnbsd-tdep.c: Likewise.
* armobsd-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* ax-gdb.c: Likewise.
* ax-general.c: Likewise.
* bcache.c: Likewise.
* bfin-tdep.c: Likewise.
* breakpoint.c: Likewise.
* build-id.c: Likewise.
* buildsym.c: Likewise.
* c-exp.y: Likewise.
* c-lang.c: Likewise.
* c-typeprint.c: Likewise.
* c-valprint.c: Likewise.
* charset.c: Likewise.
* cli-out.c: Likewise.
* cli/cli-cmds.c: Likewise.
* cli/cli-decode.c: Likewise.
* cli/cli-dump.c: Likewise.
* cli/cli-interp.c: Likewise.
* cli/cli-logging.c: Likewise.
* cli/cli-script.c: Likewise.
* cli/cli-setshow.c: Likewise.
* cli/cli-utils.c: Likewise.
* coffread.c: Likewise.
* common/agent.c: Likewise.
* common/buffer.c: Likewise.
* common/buffer.h: Likewise.
* common/common-utils.c: Likewise.
* common/filestuff.c: Likewise.
* common/filestuff.c: Likewise.
* common/format.c: Likewise.
* common/print-utils.c: Likewise.
* common/rsp-low.c: Likewise.
* common/signals.c: Likewise.
* common/vec.h: Likewise.
* common/xml-utils.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-name-parser.y: Likewise.
* cp-support.c: Likewise.
* cp-valprint.c: Likewise.
* cris-tdep.c: Likewise.
* d-exp.y: Likewise.
* darwin-nat.c: Likewise.
* dbxread.c: Likewise.
* dcache.c: Likewise.
* demangle.c: Likewise.
* dicos-tdep.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dsrec.c: Likewise.
* dummy-frame.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* elfread.c: Likewise.
* environ.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* exceptions.c: Likewise.
* exec.c: Likewise.
* expprint.c: Likewise.
* f-exp.y: Likewise.
* f-lang.c: Likewise.
* f-typeprint.c: Likewise.
* f-valprint.c: Likewise.
* fbsd-nat.c: Likewise.
* findcmd.c: Likewise.
* findvar.c: Likewise.
* fork-child.c: Likewise.
* frame.c: Likewise.
* frv-linux-tdep.c: Likewise.
* frv-tdep.c: Likewise.
* gdb.c: Likewise.
* gdb_bfd.c: Likewise.
* gdbarch.c: Likewise.
* gdbarch.sh: Likewise.
* gdbtypes.c: Likewise.
* gnu-nat.c: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-exp.y: Likewise.
* go-lang.c: Likewise.
* go32-nat.c: Likewise.
* guile/guile.c: Likewise.
* guile/scm-auto-load.c: Likewise.
* hppa-hpux-tdep.c: Likewise.
* hppa-linux-nat.c: Likewise.
* hppanbsd-tdep.c: Likewise.
* hppaobsd-tdep.c: Likewise.
* i386-cygwin-tdep.c: Likewise.
* i386-dicos-tdep.c: Likewise.
* i386-linux-tdep.c: Likewise.
* i386-nto-tdep.c: Likewise.
* i386-sol2-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* i386bsd-tdep.c: Likewise.
* i386gnu-nat.c: Likewise.
* i386nbsd-tdep.c: Likewise.
* i386obsd-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* ia64-libunwind-tdep.c: Likewise.
* ia64-linux-nat.c: Likewise.
* inf-child.c: Likewise.
* inf-ptrace.c: Likewise.
* inf-ttrace.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* inflow.c: Likewise.
* infrun.c: Likewise.
* interps.c: Likewise.
* iq2000-tdep.c: Likewise.
* irix5-nat.c: Likewise.
* jv-exp.y: Likewise.
* jv-lang.c: Likewise.
* jv-typeprint.c: Likewise.
* jv-valprint.c: Likewise.
* language.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Likewise.
* lm32-tdep.c: Likewise.
* m2-exp.y: Likewise.
* m2-typeprint.c: Likewise.
* m32c-tdep.c: Likewise.
* m32r-linux-nat.c: Likewise.
* m32r-linux-tdep.c: Likewise.
* m32r-rom.c: Likewise.
* m32r-tdep.c: Likewise.
* m68hc11-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m68kbsd-tdep.c: Likewise.
* m68klinux-nat.c: Likewise.
* m68klinux-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* machoread.c: Likewise.
* macrocmd.c: Likewise.
* main.c: Likewise.
* mdebugread.c: Likewise.
* mem-break.c: Likewise.
* memattr.c: Likewise.
* memory-map.c: Likewise.
* mep-tdep.c: Likewise.
* mi/mi-cmd-break.c: Likewise.
* mi/mi-cmd-disas.c: Likewise.
* mi/mi-cmd-env.c: Likewise.
* mi/mi-cmd-stack.c: Likewise.
* mi/mi-cmd-var.c: Likewise.
* mi/mi-cmds.c: Likewise.
* mi/mi-console.c: Likewise.
* mi/mi-getopt.c: Likewise.
* mi/mi-interp.c: Likewise.
* mi/mi-main.c: Likewise.
* mi/mi-parse.c: Likewise.
* microblaze-rom.c: Likewise.
* microblaze-tdep.c: Likewise.
* mingw-hdep.c: Likewise.
* minidebug.c: Likewise.
* minsyms.c: Likewise.
* mips-irix-tdep.c: Likewise.
* mips-linux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* mips64obsd-tdep.c: Likewise.
* mipsnbsd-tdep.c: Likewise.
* mipsread.c: Likewise.
* mn10300-linux-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* monitor.c: Likewise.
* moxie-tdep.c: Likewise.
* mt-tdep.c: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-procfs.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/linux-waitpid.c: Likewise.
* nbsd-tdep.c: Likewise.
* nios2-linux-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* nto-tdep.c: Likewise.
* objc-lang.c: Likewise.
* objfiles.c: Likewise.
* opencl-lang.c: Likewise.
* osabi.c: Likewise.
* osdata.c: Likewise.
* p-exp.y: Likewise.
* p-lang.c: Likewise.
* p-typeprint.c: Likewise.
* parse.c: Likewise.
* posix-hdep.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* ppcfbsd-tdep.c: Likewise.
* ppcnbsd-tdep.c: Likewise.
* ppcobsd-tdep.c: Likewise.
* printcmd.c: Likewise.
* procfs.c: Likewise.
* prologue-value.c: Likewise.
* python/py-auto-load.c: Likewise.
* python/py-gdb-readline.c: Likewise.
* ravenscar-thread.c: Likewise.
* regcache.c: Likewise.
* registry.c: Likewise.
* remote-fileio.c: Likewise.
* remote-m32r-sdi.c: Likewise.
* remote-mips.c: Likewise.
* remote-notif.c: Likewise.
* remote-sim.c: Likewise.
* remote.c: Likewise.
* reverse.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* ser-base.c: Likewise.
* ser-go32.c: Likewise.
* ser-mingw.c: Likewise.
* ser-pipe.c: Likewise.
* ser-tcp.c: Likewise.
* ser-unix.c: Likewise.
* serial.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* shnbsd-tdep.c: Likewise.
* skip.c: Likewise.
* sol-thread.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-frv.c: Likewise.
* solib-osf.c: Likewise.
* solib-som.c: Likewise.
* solib-spu.c: Likewise.
* solib-target.c: Likewise.
* solib.c: Likewise.
* somread.c: Likewise.
* source.c: Likewise.
* sparc-nat.c: Likewise.
* sparc-sol2-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* sparc64fbsd-tdep.c: Likewise.
* sparc64nbsd-tdep.c: Likewise.
* sparcnbsd-tdep.c: Likewise.
* spu-linux-nat.c: Likewise.
* spu-multiarch.c: Likewise.
* spu-tdep.c: Likewise.
* stabsread.c: Likewise.
* stack.c: Likewise.
* std-regs.c: Likewise.
* symfile.c: Likewise.
* symmisc.c: Likewise.
* symtab.c: Likewise.
* target.c: Likewise.
* thread.c: Likewise.
* tilegx-linux-nat.c: Likewise.
* tilegx-tdep.c: Likewise.
* top.c: Likewise.
* tracepoint.c: Likewise.
* tui/tui-command.c: Likewise.
* tui/tui-data.c: Likewise.
* tui/tui-disasm.c: Likewise.
* tui/tui-file.c: Likewise.
* tui/tui-layout.c: Likewise.
* tui/tui-out.c: Likewise.
* tui/tui-regs.c: Likewise.
* tui/tui-source.c: Likewise.
* tui/tui-stack.c: Likewise.
* tui/tui-win.c: Likewise.
* tui/tui-windata.c: Likewise.
* tui/tui-winsource.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* ui-out.c: Likewise.
* user-regs.c: Likewise.
* utils.c: Likewise.
* v850-tdep.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* vax-tdep.c: Likewise.
* vaxnbsd-tdep.c: Likewise.
* vaxobsd-tdep.c: Likewise.
* windows-nat.c: Likewise.
* xcoffread.c: Likewise.
* xml-support.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-linux-nat.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include string.h.
* event-loop.c: Likewise.
* linux-low.c: Likewise.
* regcache.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
|
|
This commit includes gdb_assert.h in common-defs.h and removes all
other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include gdb_assert.h.
* aarch64-tdep.c: Do not include gdb_assert.h.
* addrmap.c: Likewise.
* aix-thread.c: Likewise.
* alpha-linux-tdep.c: Likewise.
* alpha-mdebug-tdep.c: Likewise.
* alphanbsd-tdep.c: Likewise.
* amd64-nat.c: Likewise.
* amd64-tdep.c: Likewise.
* amd64bsd-nat.c: Likewise.
* amd64fbsd-nat.c: Likewise.
* amd64fbsd-tdep.c: Likewise.
* amd64nbsd-nat.c: Likewise.
* amd64nbsd-tdep.c: Likewise.
* amd64obsd-nat.c: Likewise.
* amd64obsd-tdep.c: Likewise.
* arch-utils.c: Likewise.
* arm-tdep.c: Likewise.
* armbsd-tdep.c: Likewise.
* auxv.c: Likewise.
* bcache.c: Likewise.
* bfin-tdep.c: Likewise.
* blockframe.c: Likewise.
* breakpoint.c: Likewise.
* bsd-kvm.c: Likewise.
* bsd-uthread.c: Likewise.
* buildsym.c: Likewise.
* c-exp.y: Likewise.
* c-lang.c: Likewise.
* charset.c: Likewise.
* cleanups.c: Likewise.
* cli-out.c: Likewise.
* cli/cli-decode.c: Likewise.
* cli/cli-dump.c: Likewise.
* cli/cli-logging.c: Likewise.
* cli/cli-script.c: Likewise.
* cli/cli-utils.c: Likewise.
* coffread.c: Likewise.
* common/common-utils.c: Likewise.
* common/queue.h: Likewise.
* common/signals.c: Likewise.
* common/vec.h: Likewise.
* complaints.c: Likewise.
* completer.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-name-parser.y: Likewise.
* cp-namespace.c: Likewise.
* cp-support.c: Likewise.
* cris-tdep.c: Likewise.
* dbxread.c: Likewise.
* dictionary.c: Likewise.
* doublest.c: Likewise.
* dsrec.c: Likewise.
* dummy-frame.c: Likewise.
* dwarf2-frame-tailcall.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2expr.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* exceptions.c: Likewise.
* expprint.c: Likewise.
* f-valprint.c: Likewise.
* fbsd-nat.c: Likewise.
* findvar.c: Likewise.
* frame-unwind.c: Likewise.
* frame.c: Likewise.
* frv-tdep.c: Likewise.
* gcore.c: Likewise.
* gdb-dlfcn.c: Likewise.
* gdb_bfd.c: Likewise.
* gdbarch.c: Likewise.
* gdbarch.sh: Likewise.
* gdbtypes.c: Likewise.
* gnu-nat.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-lang.c: Likewise.
* guile/scm-exception.c: Likewise.
* guile/scm-gsmob.c: Likewise.
* guile/scm-lazy-string.c: Likewise.
* guile/scm-math.c: Likewise.
* guile/scm-pretty-print.c: Likewise.
* guile/scm-safe-call.c: Likewise.
* guile/scm-utils.c: Likewise.
* guile/scm-value.c: Likewise.
* h8300-tdep.c: Likewise.
* hppa-hpux-nat.c: Likewise.
* hppa-tdep.c: Likewise.
* hppanbsd-tdep.c: Likewise.
* hppaobsd-tdep.c: Likewise.
* i386-darwin-nat.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i386-nto-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* i386bsd-nat.c: Likewise.
* i386fbsd-tdep.c: Likewise.
* i386gnu-nat.c: Likewise.
* i386nbsd-tdep.c: Likewise.
* i386obsd-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* ia64-libunwind-tdep.c: Likewise.
* ia64-tdep.c: Likewise.
* inf-ptrace.c: Likewise.
* inf-ttrace.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* inline-frame.c: Likewise.
* interps.c: Likewise.
* jv-lang.c: Likewise.
* jv-typeprint.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Likewise.
* linux-thread-db.c: Likewise.
* m32c-tdep.c: Likewise.
* m32r-linux-nat.c: Likewise.
* m32r-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m68kbsd-nat.c: Likewise.
* m68kbsd-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* machoread.c: Likewise.
* macroexp.c: Likewise.
* macrotab.c: Likewise.
* maint.c: Likewise.
* mdebugread.c: Likewise.
* memory-map.c: Likewise.
* mep-tdep.c: Likewise.
* mi/mi-common.c: Likewise.
* microblaze-tdep.c: Likewise.
* mingw-hdep.c: Likewise.
* mips-linux-nat.c: Likewise.
* mips-linux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* mips64obsd-tdep.c: Likewise.
* mipsnbsd-tdep.c: Likewise.
* mn10300-linux-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* moxie-tdep.c: Likewise.
* mt-tdep.c: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/mips-linux-watch.c: Likewise.
* nios2-linux-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* objc-lang.c: Likewise.
* objfiles.c: Likewise.
* obsd-nat.c: Likewise.
* opencl-lang.c: Likewise.
* osabi.c: Likewise.
* parse.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* ppcfbsd-nat.c: Likewise.
* ppcfbsd-tdep.c: Likewise.
* ppcnbsd-nat.c: Likewise.
* ppcnbsd-tdep.c: Likewise.
* ppcobsd-nat.c: Likewise.
* ppcobsd-tdep.c: Likewise.
* printcmd.c: Likewise.
* procfs.c: Likewise.
* prologue-value.c: Likewise.
* psymtab.c: Likewise.
* python/py-lazy-string.c: Likewise.
* python/py-value.c: Likewise.
* regcache.c: Likewise.
* reggroups.c: Likewise.
* registry.c: Likewise.
* remote-sim.c: Likewise.
* remote.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* rs6000-tdep.c: Likewise.
* s390-linux-tdep.c: Likewise.
* score-tdep.c: Likewise.
* ser-base.c: Likewise.
* ser-mingw.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* solib-darwin.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* source.c: Likewise.
* sparc-nat.c: Likewise.
* sparc-sol2-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-sol2-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* sparc64fbsd-tdep.c: Likewise.
* sparc64nbsd-tdep.c: Likewise.
* sparc64obsd-tdep.c: Likewise.
* sparcnbsd-tdep.c: Likewise.
* sparcobsd-tdep.c: Likewise.
* spu-multiarch.c: Likewise.
* spu-tdep.c: Likewise.
* stabsread.c: Likewise.
* stack.c: Likewise.
* symfile.c: Likewise.
* symtab.c: Likewise.
* target-descriptions.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* tic6x-linux-tdep.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-linux-nat.c: Likewise.
* tilegx-tdep.c: Likewise.
* top.c: Likewise.
* tramp-frame.c: Likewise.
* tui/tui-out.c: Likewise.
* tui/tui-winsource.c: Likewise.
* ui-out.c: Likewise.
* user-regs.c: Likewise.
* utils.c: Likewise.
* v850-tdep.c: Likewise.
* valops.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* vax-nat.c: Likewise.
* xml-syscall.c: Likewise.
* xml-tdesc.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-linux-nat.c: Likewise.
* xtensa-tdep.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include gdb_assert.h.
|
|
https://sourceware.org/ml/gdb-patches/2014-05/msg00383.html
The MI command -var-info-path-expression currently does not handle
non-anonymous structs / unions nested within other structs / unions,
it will skip parts of the expression. Consider this example:
## START EXAMPLE ##
$ cat ex.c
#include <string.h>
int
main ()
{
struct s1
{
int a;
};
struct ss
{
struct s1 x;
};
struct ss an_ss;
memset (&an_ss, 0, sizeof (an_ss));
return 0;
}
$ gcc -g -o ex.x ex.c
$ gdb ex.x
(gdb) break 18
Breakpoint 1 at 0x80483ba: file ex.c, line 18.
(gdb) run
Starting program: /home/user/ex.x
Breakpoint 1, main () at ex.c:18
18 return 0;
(gdb) interpreter-exec mi "-var-create an_ss * an_ss"
(gdb) interpreter-exec mi "-var-list-children an_ss"
^done,numchild="1",children=[child={name="an_ss.x",exp="x",numchild="1",type="struct s1",thread-id="1"}],has_more="0"
(gdb) interpreter-exec mi "-var-list-children an_ss.x"
^done,numchild="1",children=[child={name="an_ss.x.a",exp="a",numchild="0",type="int",thread-id="1"}],has_more="0"
(gdb) interpreter-exec mi "-var-list-children an_ss.x.a"
^done,numchild="0",has_more="0"
(gdb) interpreter-exec mi "-var-info-path-expression an_ss.x.a"
^done,path_expr="(an_ss).a"
(gdb) print (an_ss).a
There is no member named a.
## END EXAMPLE ##
Notice that the path expression returned is wrong, and as a result
the print command fails.
This patch adds a new method to the varobj_ops structure called
is_path_expr_parent, to allow language specific control over finding
the parent varobj, the current logic becomes the C/C++ version and is
extended to handle the nested cases. No other language currently uses
this code, so all other languages just get a default method.
With this patch, the above example now finishes like this:
## START EXAMPLE ##
$ gdb ex.x
(gdb) break 18
Breakpoint 1 at 0x80483ba: file ex.c, line 18.
(gdb) run
Starting program: /home/user/ex.x
Breakpoint 1, main () at ex.c:18
18 return 0;
(gdb) interpreter-exec mi "-var-list-children an_ss"
^done,numchild="1",children=[child={name="an_ss.x",exp="x",numchild="1",type="struct s1",thread-id="1"}],has_more="0"
(gdb) interpreter-exec mi "-var-list-children an_ss.x"
^done,numchild="1",children=[child={name="an_ss.x.a",exp="a",numchild="0",type="int",thread-id="1"}],has_more="0"
(gdb) interpreter-exec mi "-var-list-children an_ss.x.a"
^done,numchild="0",has_more="0"
(gdb) interpreter-exec mi "-var-info-path-expression an_ss.x.a"
^done,path_expr="((an_ss).x).a"
(gdb) print ((an_ss).x).a
$1 = 0
## END EXAMPLE ##
Notice that the path expression is now correct, and the print is a
success.
gdb/ChangeLog:
* ada-varobj.c (ada_varobj_ops): Fill in is_path_expr_parent
field.
* c-varobj.c (c_is_path_expr_parent): New function, moved core
from varobj.c, with additional checks.
(c_varobj_ops): Fill in is_path_expr_parent field.
(cplus_varobj_ops): Fill in is_path_expr_parent field.
* jv-varobj.c (java_varobj_ops): Fill in is_path_expr_parent
field.
* varobj.c (is_path_expr_parent): Call is_path_expr_parent varobj
ops method.
(varobj_default_is_path_expr_parent): New function.
* varobj.h (lang_varobj_ops): Add is_path_expr_parent field.
(varobj_default_is_path_expr_parent): Declare new function.
gdb/testsuite/ChangeLog:
* gdb.mi/var-cmd.c (do_nested_struct_union_tests): New function
setting up test structures.
(main): Call new test function.
* gdb.mi/mi2-var-child.exp: Create additional breakpoint in new
test function, continue into test function and walk test
structures.
|
|
This makes some spots in gdb, particularly general_symbol_info, use a
"const struct block", then fixes the fallout.
The justification is that, ordinarily, blocks ought to be readonly.
Note though that we can't add "const" in the blockvector due to block
relocation. This can be done once blocks are made independent of the
program space.
2014-06-18 Tom Tromey <tromey@redhat.com>
* varobj.c (varobj_create): Update.
* valops.c (value_of_this): Update.
* tracepoint.c (add_local_symbols, scope_info): Update.
* symtab.h (struct general_symbol_info) <block>: Now const.
* symtab.c (skip_prologue_sal)
(default_make_symbol_completion_list_break_on)
(skip_prologue_using_sal): Update.
* stack.h (iterate_over_block_locals)
(iterate_over_block_local_vars): Update.
* stack.c (print_frame_args): Update.
(iterate_over_block_locals, iterate_over_block_local_vars): Make
parameter const.
(get_selected_block): Make return type const.
* python/py-frame.c (frapy_block): Update.
* python/py-block.c (gdbpy_block_for_pc): Update.
* p-exp.y (%union) <bval>: Now const.
* mi/mi-cmd-stack.c (list_args_or_locals): Update.
* mdebugread.c (mylookup_symbol, parse_procedure): Update.
* m2-exp.y (%union) <bval>: Now const.
* linespec.c (get_current_search_block): Make return type const.
(create_sals_line_offset, find_label_symbols): Update.
* inline-frame.c (inline_frame_sniffer, skip_inline_frames):
Update.
(block_starting_point_at): Make "block" const.
* infrun.c (insert_exception_resume_breakpoint): Make "b" const.
(check_exception_resume): Update.
* guile/scm-frame.c (gdbscm_frame_block): Update.
* guile/scm-block.c (gdbscm_lookup_block): Update.
* frame.h (get_frame_block): Update.
(get_selected_block): Make return type const.
* frame.c (frame_id_inner): Update.
* f-valprint.c (info_common_command_for_block)
(info_common_command): Update.
* dwarf2loc.c (dwarf2_find_location_expression)
(dwarf_expr_frame_base, dwarf2_compile_expr_to_ax)
(locexpr_describe_location_piece): Update.
* c-exp.y (%union) <bval>: Now const.
* breakpoint.c (resolve_sal_pc): Update.
* blockframe.c (get_frame_block):Make return type const.
(get_pc_function_start, get_frame_function, find_pc_sect_function)
(block_innermost_frame): Update.
* block.h (blockvector_for_pc, blockvector_for_pc_sect)
(block_for_pc, block_for_pc_sect): Update.
* block.c (blockvector_for_pc_sect, blockvector_for_pc): Make
'pblock' const.
(block_for_pc_sect, block_for_pc): Make return type const.
* ax-gdb.c (gen_expr): Update.
* alpha-mdebug-tdep.c (find_proc_desc): Update.
* ada-lang.c (ada_read_renaming_var_value): Make 'block' const.
(ada_make_symbol_completion_list, ada_add_exceptions_from_frame)
(ada_read_var_value): Update.
* ada-exp.y (struct name_info) <block>: Now const.
(%union): Likewise.
(block_lookup): Constify.
|
|
Use varobj_is_dynamic_p more widely so that the callers of
varobj_is_dynamic_p are unchanged when we add available-children-only
stuff in varobj_is_dynamic_p.
gdb:
2014-06-12 Yao Qi <yao@codesourcery.com>
* varobj.c (varobj_get_num_children): Call
varobj_is_dynamic_p.
(varobj_list_children): Likewise.
(varobj_update): Likewise. Update comments.
|
|
We think varobj with --available-children-only behaves like a dynamic
varobj, so dyanmic varobj is not pretty-printer specific. We rename
varobj_pretty_printed_p to varobj_is_dynamic_p, so that we can handle
available-children-only checking in varobj_is_dynamic_p in the next
patch.
gdb:
2014-06-12 Yao Qi <yao@codesourcery.com>
* varobj.c (varobj_pretty_printed_p): Rename to ...
(varobj_is_dynamic_p): ... this. New function.
* varobj.h (varobj_pretty_printed_p): Remove declaration.
(varobj_is_dynamic_p): Declare.
* mi/mi-cmd-var.c (print_varobj): All callers updated.
(mi_print_value_p, varobj_update_one): Likewise.
|
|
This patch removes some unnecessary "#if HAVE_PYTHON" so that more
code is generalized.
gdb:
2014-06-12 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* varobj.c: Remove "#if HAVE_PYTHON" and "#endif".
(varobj_get_iterator): Wrap up code for pretty-printer by
"#if HAVE_PYTHON" and "#endif".
(update_dynamic_varobj_children): Likewise.
|
|
In previous patch, "saved_item" is still a PyOjbect and iteration is
still performed over PyObject. This patch continues to decouple
iteration from python code, so it changes its type to "struct
varobj_item *", so that the iterator itself is independent of python.
V2:
- Call varobj_delete_iter in free_variable.
- Fix changelog entries.
- Use XNEW.
V3:
- Return NULL early in py_varobj_iter_next if gdb_python_initialized
is false.
gdb:
2014-06-12 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* python/py-varobj.c (py_varobj_iter_next): Return NULL if
gdb_python_initialized is false. Move some code from varobj.c.
* varobj-iter.h (struct varobj_item): Moved from varobj.c.
* varobj.c: Move "varobj-iter.h" inclusion earlier.
(struct varobj_item): Moved to varobj-iter.h".
(varobj_clear_saved_item): New function.
(update_dynamic_varobj_children): Move python-related code to
py-varobj.c.
(free_variable): Call varobj_clear_saved_item and
varobj_iter_delete.
|
|
This patch generalizes varobj iterator, in a python-independent way.
Note varobj_item is still a typedef of PyObject, we can only focus on
API changes, and leave the data type changes to the next patch. As a
result, we include "varobj-iter.h" after the typedef of PyObject in
varobj.c, but it is an intermediate state. Finally, varobj-iter.h is
independent of PyObject.
This change is helpful to move some python-related code out of
varobj.c.
V2:
- Fix a missing cleanup.
- Fix typos.
- Use XNEW.
- Check against NULL explicitly.
- Update copyright year for new added files.
V3:
- Call PyGILState_Ensure before Py_XDECREF.
- Use CPYCHECKER_STEALS_REFERENCE_TO_ARG.
- Code indentation.
V4:
- use varobj_ensure_python_env instead of PyGILState_Ensure.
gdb:
2014-06-12 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* Makefile.in (SUBDIR_PYTHON_OBS): Add "py-varobj.o".
(SUBDIR_PYTHON_SRCS): Add "python/py-varobj.c".
(HFILES_NO_SRCDIR): Add "varobj-iter.h".
(py-varobj.o): New rule.
* python/py-varobj.c: New file.
* python/python-internal.h (py_varobj_get_iterator): Declare.
* varobj-iter.h: New file.
* varobj.c: Include "varobj-iter.h"
(struct varobj) <child_iter>: Change its type from "PyObject *"
to "struct varobj_iter *".
<saved_item>: Likewise.
[HAVE_PYTHON] (varobj_ensure_python_env): Make it extern.
[HAVE_PYTHON] (varobj_get_iterator): New function.
(update_dynamic_varobj_children) [HAVE_PYTHON]: Move
python-specific code to python/py-varobj.c.
(install_visualizer): Call varobj_iter_delete instead of
Py_XDECREF.
* varobj.h (varobj_ensure_python_env): Declare.
|
|
Hi,
name and value pair is widely used in varobj.c. This patch is to add
a new struct varobj_item to represent them, so that the number of
function arguments can be reduced. Finally, the iteration is done on
'struct varobj_item' instead of PyObject after this patch series.
V2:
- Fix changelog entry.
- Fix one grammatical mistake.
gdb:
2014-06-12 Yao Qi <yao@codesourcery.com>
* varobj.c (struct varobj_item): New structure.
(create_child_with_value): Update declaration.
(varobj_add_child): Replace arguments 'name' and 'value' with
'item'. All callers updated.
(install_dynamic_child): Likewise.
(update_dynamic_varobj_children): Likewise.
(varobj_add_child): Likewise.
(create_child_with_value): Likewise.
|
|
I think "set debugvarobj" has the wrong name.
It ought to be "set debug varobj", like gdb's other debug settings.
This patch makes the change.
I chose not to install deprecated aliases, since this is only a debug
setting; but if someone feels strongly about it I will add them.
Built and regtested on x86-64 Fedora 20.
2014-04-29 Tom Tromey <tromey@redhat.com>
* varobj.c (_initialize_varobj): Rename to "set debug varobj" and
"show debug varobj".
2014-04-29 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Debugging Output): Rename to "set debug varobj" and
"show debug varobj".
|
|
Given the following variable...
BT : Bounded := New_Bounded (Low => 1, High => 3);
... where type Bounded is defined as a simple unconstrained array:
type Bounded is array (Integer range <>) of Integer;
Creating a varobj for that variable, and immediately asking for
varobj updates, GDB says that our varobj changed types!
(gdb)
-var-create bt * bt
^done,name="bt",numchild="3",value="[3]",type="<ref> array (1 .. 3) of integer",has_more="0"
(gdb)
-var-update 1 *
^done,changelist=[{name="bt",value="[3]",in_scope="true",type_changed="true",new_type="<ref> array (1 .. 3) of integer",new_num_children="3",has_more="0"}]
The expected output for the -var-update command is, in this case:
(gdb)
-var-update 1 *
^done,changelist=[]
The problem occurs because the ada-varobj module does not handle
references, and while the references gets stripped when the varobj
gets created, it doesn't when computing varobj updates.
More specifically, when creating the varobj, varobj_create creates
a new value which is a reference to a TYPE_CODE_ARRAY. It then calls
install_new_value which calls coerce_ref with the following comment:
/* We are not interested in the address of references, and given
that in C++ a reference is not rebindable, it cannot
meaningfully change. So, get hold of the real value. */
if (value)
value = coerce_ref (value);
This leaves the varobj's type component still a ref, while
the varobj's value is now our array, without the ref. This explains
why the "value" field in the varobj indicates an array with 3 elements
"[3]" while the "type" field shows a ref to an array. Generally
speaking, most users have said that showing the ref was a useful
piece of information, so this patch is not touching this part.
Next, when the user issues the -var-update request, varobj_update
calls value_of_root to compute the varobj's new value as well as
determine whether the value's type has changed or not. What happens
in a nutshell is that it calls value_of_root_1 (which re-evaluates
the expression and returns the corresponding new value), finds that
the new value is not NULL, and thus asks whether it has mutated:
else if (varobj_value_has_mutated (var, value, value_type (value)))
This then indirectly delegates the determination to the language-specific
callback, which fails, because it does not handle references.
This patch fixes the issue by adjusting varobj_value_has_mutated to
expect references, and strip them when seen. This allows the various
language-specific implementations to remain unaware of references.
gdb/ChangeLog:
* varobj.c (varobj_value_has_mutated): If NEW_VALUE is
a reference, strip the reference layer before calling
the lang_ops value_has_mutated callback.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_dyn_arr: New testcase.
|
|
|
|
Hi,
"It's" should be "Its". This patch is to fix it. Committed as
obvious.
gdb:
2013-11-19 Yao Qi <yao@codesourcery.com>
* varobj.c (varobj_get_type): Fix typo.
|
|
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
|
|
This patch does some cleanups, removing some language-related stuff.
Note that mi_cmd_var_info_expression uses varobj_language_string,
which is redundant, because we can get language name from
lang->la_natural_name.
varobj_language_string doesn't have "Ada", which looks like a bug to
me. With this patch applied, this problem doesn't exist, because the
language name is got from the same place (field la_natural_name).
gdb:
2013-11-07 Yao Qi <yao@codesourcery.com>
* mi/mi-cmd-var.c: Include "language.h".
(mi_cmd_var_info_expression): Get language name from
language_defn.
* varobj.c (varobj_language_string): Remove.
(variable_language): Remove declaration.
(languages): Remove.
(varobj_get_language): Change the type of return value.
(variable_language): Remove.
* varobj.h (enum varobj_languages): Remove.
(varobj_language_string): Remove declaration.
(varobj_get_language): Update declaration.
gdb/doc:
2013-11-07 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (GDB/MI Variable Objects): Update doc about the
output of "-var-info-expression".
|
|
On 10/25/2013 11:34 AM, Joel Brobecker wrote:
> Also, as a followup, I think it would be beneficial if we renamed
> field "lang" in the varobj_root into "lang_ops". I think it's more
> descriptive, especially since "lang" is used elsewhere with different
> meanings (and types).
Here is the patch to rename 'lang' to 'lang_ops'. Committed as obvious.
gdb:
2013-10-27 Yao Qi <yao@codesourcery.com>
* varobj.c (struct varobj_root) <lang>: Rename to 'lang_ops'.
(varobj_create, varobj_get_path_expr): Update.
(varobj_value_has_mutated, varobj_update): Likewise.
(create_child_with_value, new_root_variable): Likewise.
(number_of_children, name_of_variable): Likewise.
(value_of_child, my_value_of_variable): Likewise.
(varobj_value_is_changeable_p): Likewise.
|
|
This is a follow-up series to move language stuff out of varobj.c.
This patch adds a new field la_varobj_ops in struct language_defn so
that each language has varobj-related options. Not every language
supports varobj, and the operations are identical to operations of c
languages.
'struct language_defn' is the ideal place to save all language-related
operations. After this patch, some cleanups can be done in patch 2/2,
which removes language-related stuff completely from varobj.c.
Regression tested on x86_64-linux.
gdb:
2013-10-25 Yao Qi <yao@codesourcery.com>
* language.h (struct lang_varobj_ops): Declare.
(struct language_defn) <la_varobj_ops>: New field.
* ada-lang.c: Include "varobj.h"
(defn ada_language_defn): Initialize field 'la_varobj_ops' by
ada_varobj_ops.
* c-lang.c: Include "varobj.h"
(c_language_defn): Initialize field 'la_varobj_ops' by
c_varobj_ops.
(cplus_language_defn): Initialize field 'la_varobj_ops' by
cplus_varobj_ops.
(asm_language_defn): Initialize field 'la_varobj_ops' by
default_varobj_ops.
(minimal_language_defn): Likewise.
* d-lang.c (d_language_defn): Likewise.
* f-lang.c (f_language_defn): Likewise.
* go-lang.c (go_language_defn): Likewise.
* m2-lang.c (m2_language_defn): Likewise.
* objc-lang.c (objc_language_defn): Likewise.
* opencl-lang.c (opencl_language_defn): Likewise.
* p-lang.c (pascal_language_defn): Likewise.
* language.c (unknown_language_defn): Likewise.
(auto_language_defn): Likewise.
(local_language_defn): Likewise.
* jv-lang.c (java_language_defn): Initialize field
'la_varobj_ops' by java_varobj_ops.
* varobj.c (varobj_create): Update.
* varobj.h (default_varobj_ops): Define macro.
|
|
* Makefile.in (SFILES): Add c-varobj.c and jv-varobj.c.
(COMMON_OBS): Add c-varobj.o and jv-varobj.o.
* ada-varobj.c: Include "varobj.h".
(ada_number_of_children): New. Moved from varobj.c.
(ada_name_of_variable, ada_name_of_child): Likewise.
(ada_path_expr_of_child, ada_value_of_child): Likewise.
(ada_type_of_child, ada_value_of_variable): Likewise.
(ada_value_is_changeable_p, ada_value_has_mutated): Likewise.
(ada_varobj_ops): New.
* c-varobj.c, jv-varobj.c: New file. Moved from varobj.c.
* gdbtypes.c (get_target_type): New. Moved from varobj.c.
* gdbtypes.h (get_target_type): Declare.
* varobj.c: Remove the inclusion of "ada-varobj.h" and
"ada-lang.h".
(ANONYMOUS_STRUCT_NAME): Move it to c-varobj.c.
(ANONYMOUS_UNION_NAME): Likewise.
(get_type, get_value_type, get_target_type): Remove declarations.
(value_get_print_value, varobj_value_get_print_value): Likewise.
(c_number_of_children, c_name_of_variable): Likewise.
(c_name_of_child, c_path_expr_of_child): Likewise.
(c_value_of_child, c_type_of_child): Likewise.
(c_value_of_variable, cplus_number_of_children): Likewise.
(cplus_class_num_children, cplus_name_of_variable): Likewise.
(cplus_name_of_child, cplus_path_expr_of_child): Likewise.
(cplus_value_of_child, cplus_type_of_child): Likewise.
(cplus_value_of_variable, java_number_of_children): Likewise.
(java_name_of_variable, java_name_of_child): Likewise.
(java_path_expr_of_child, java_value_of_child): Likewise.
(java_type_of_child, java_value_of_variable): Likewise.
(ada_number_of_children, ada_name_of_variable): Likewise.
(ada_name_of_child, ada_path_expr_of_child): Likewise.
(ada_value_of_child, ada_type_of_child): Likewise.
(ada_value_of_variable, ada_value_is_changeable_p): Likewise.
(ada_value_has_mutated): Likewise.
(struct language_specific): Move it to varobj.h.
(CPLUS_FAKE_CHILD): Move it to varobj.h.
(restrict_range): Rename it varobj_restrict_range. Make it extern.
Callers update.
(get_path_expr_parent): Rename it to varobj_get_path_expr_parent.
Make it extern.
(is_anonymous_child): Move it to c-varobj.c and rename to
varobj_is_anonymous_child. Caller update.
(get_type): Move it to c-varobj.c.
(get_value_type): Rename it varobj_get_value_type. Make it
extern.
(get_target_type): Move it gdbtypes.c.
(varobj_formatted_print_options): New function.
(value_get_print_value): Rename it to
varobj_value_get_print_value and make it extern.
(varobj_value_is_changeable_p): Make it extern.
(adjust_value_for_child_access): Move it to c-varobj.c.
(default_value_is_changeable_p): Rename it to
varobj_default_value_is_changeable_p. Make it extern.
(c_number_of_children, c_name_of_variable): Move it to c-varobj.c
(c_name_of_child, c_path_expr_of_child): Likewise.
(c_value_of_child, c_type_of_child): Likewise.
(c_value_of_variable, cplus_number_of_children): Likewise.
(cplus_class_num_children, cplus_name_of_variable): Likewise.
(cplus_name_of_child, cplus_path_expr_of_child): Likewise.
(cplus_value_of_child, cplus_type_of_child): Likewise.
(cplus_value_of_variable): Likewise.
(java_number_of_children, java_name_of_variable): Move it to jv-varobj.c.
(java_name_of_child, java_path_expr_of_child): Likewise.
(java_value_of_child, java_type_of_child): Likewise.
(java_value_of_variable): Likewise.
(ada_number_of_children, ada_name_of_variable): Move it to ada-varobj.c.
(ada_name_of_child, ada_path_expr_of_child): Likewise.
(ada_value_of_child, ada_type_of_child): Likewise.
(ada_value_of_variable, ada_value_is_changeable_p): Likewise.
(ada_value_has_mutated): Likewise.
* varobj.h (CPLUS_FAKE_CHILD): New macro, moved from varobj.c.
(struct lang_varobj_ops): New. Renamed by 'struct language_specific'.
(c_varobj_ops, cplus_varobj_ops): Declare.
(java_varobj_ops, ada_varobj_ops): Declare.
(varobj_default_value_is_changeable_p): Declare.
(varobj_value_is_changeable_p): Declare.
(varobj_get_value_type, varobj_is_anonymous_child): Declare.
(varobj_get_path_expr_parent): Declare.
(varobj_value_get_print_value): Declare.
(varobj_formatted_print_options): Declare.
(varobj_restrict_range): Declare.
|
|
* varobj.c (struct varobj): Move most of the fields to
varobj.h.
(struct varobj_dynamic): New struct.
(varobj_get_display_hint) [HAVE_PYTHON]: Adjust.
(varobj_has_more): Likewise.
(dynamic_varobj_has_child_method): Likewise.
(update_dynamic_varobj_children): Likewise.
(varobj_get_num_children): Likewise.
(varobj_list_children, varobj_pretty_printed_p): Likewise.
(install_new_value_visualizer): Likewise.
(install_new_value_visualizer, install_new_value): Likewise.
(varobj_update, new_variable, free_variable): Likewise.
(my_value_of_variable, value_get_print_value): Likewise.
(install_visualizer): Change the type of parameter 'var' to
'struct varobjd_dynamic *'. Callers update.
* varobj.h (struct varobj): Moved from varobj.c.
(struct varobj) <dynamic>: New field.
|
|
Hi,
This FIXME goes into my eyes, when I am about to modify something here,
/* Name is allocated by name_of_child. */
/* FIXME: xstrdup should not be here. */
This FIXME was introduced in the python pretty-pretter patches.
Python pretty-printing [6/6]
https://sourceware.org/ml/gdb-patches/2009-05/msg00467.html
create_child_with_value is called in two paths,
1. varobj_list_children -> create_child -> create_child_with_value,
2. install_dynamic_child -> install_dynamic_child -> varobj_add_child
-> create_child_with_value
In path #1, 'name' is allocated by name_of_child, as the original
comment said, we don't have to duplicate NAME in
create_child_with_value. In path #2, 'name' is got from
PyArg_ParseTuple, and we have to duplicate NAME.
This patch removes the call to xstrdup in create_child_with_value
and call xstrudp in update_dynamic_varobj_children (path #2).
gdb:
2013-10-04 Yao Qi <yao@codesourcery.com>
* varobj.c (create_child_with_value): Remove 'const' from the
type of parameter 'name'.
(varobj_add_child): Likewise.
(install_dynamic_child): Remove 'const' from the type of
parameter 'name'.
(varobj_add_child): Likewise.
(create_child_with_value): Likewise. Update comments. Don't
duplicate 'name'.
(update_dynamic_varobj_children): Duplicate 'name'
and pass it to install_dynamic_child.
|
|
* varobj.c (c_value_of_root): Remove declaration.
(cplus_value_of_root, java_value_of_root): Likewise.
(ada_value_of_root): Likewise.
(struct language_specific) <value_of_root>: Remove.
(languages): Update initialization.
(check_scope): Move earlier.
(c_value_of_root): Move earlier and rename to ...
(value_of_root_1): ... this.
(value_of_root): Caller update.
(cplus_value_of_root, java_value_of_root): Remove.
(ada_value_of_root): Remove.
|
|
* varobj.c (varobj_format_string): Remove "unknown".
(languages): Remove the first element.
* varobj.h (enum varobj_languages): Remove vlang_c.
|
|
* varobj.c (struct language_specific) <language>: Remove.
(languages): Update the initialization.
|
|
* varobj.c (install_dynamic_child): Remove trailing space.
Add one blank line after variable declaration.
|
|
c_value_of_root is missing a call to do_cleanups at one return.
This fixes the problem by removing that return and letting control
fall through.
* varobj.c (c_value_of_root): Call do_cleanups along all
return paths.
|
|
(mi_cmd_list_features): Check gdb_python_initialized.
* python/py-inferior.c (python_on_normal_stop, python_on_resume)
(python_inferior_exit, python_new_objfile, add_thread_object)
(delete_thread_object, py_free_inferior): Check
gdb_python_initialized.
* python/py-prettyprint.c (apply_val_pretty_printer): Check
gdb_python_initialized.
* python/py-type.c (save_objfile_types): Check
gdb_python_initialized.
* python/python-internal.h (gdb_python_initialized): Declare.
* python/python.c (ensure_python_env): Throw exception if
Python not initialized.
(before_prompt_hook, source_python_script_for_objfile)
(start_type_printers, apply_type_printers,
free_type_printers): Check gdb_python_initialized.
* varobj.c (varobj_get_display_hint)
(dynamic_varobj_has_child_method, update_dynamic_varobj_children)
(install_new_value_visualizer, varobj_set_visualizer)
(value_get_print_value): Check gdb_python_initialized.
|
|
... when !HAVE_PYTHON.
gdb/ChangeLog:
* varobj.c (update_dynamic_varobj_children) [!HAVE_PYTHON]:
Use gdb_assert_not_reached instead of invalid boolean expression.
|
|
pointer to expression string to parse_exp_1.
(create_excep_cond_exprs): Likewise.
* ax-gdb.c (agent_eval_command_one): Likewise.
(maint_agent_printf_command): Likewise.
Constify much of the string handling/parsing.
* breakpoint.c (set_breakpoint_condition): Pass const
pointer to expression string to parse_exp_1.
(update_watchpoint): Likewise.
(parse_cmd_to_aexpr): Constify string handling.
Pass const pointer to parse_exp_1.
(init_breakpoint_sal): Pass const pointer to parse_exp_1.
(find_condition_and_thread): Likewise.
Make TOK const.
(watch_command_1): Make "arg" const.
Constify string handling.
Copy the expression string instead of changing the input
string.
(update_breakpoint_location): Pass const pointer to
parse_exp_1.
* eval.c (parse_and_eval_address): Make "exp" const.
(parse_to_comma_and_eval): Make "expp" const.
(parse_and_eval): Make "exp" const.
* expression.h (parse_expression): Make argument const.
(parse_exp_1): Make first argument const.
* findcmd.c (parse_find_args): Treat "args" as const.
* linespec.c (parse_linespec): Pass const pointer to
linespec_expression_to_pc.
(linespec_expression_to_pc): Make "exp_ptr" const.
* parse.c (parse_exp_1): Make "stringptr" const.
Make a copy of the expression to pass to parse_exp_in_context until
this whole interface can be constified.
(parse_expression): Make "string" const.
* printcmd.c (ui_printf): Treat "arg" as const.
Handle const strings.
* tracepoint.c (validate_actionline): Pass const pointer to
all calls to parse_exp_1.
(encode_actions_1): Likewise.
* value.h (parse_to_comma_and_eval): Make argument const.
(parse_and_eval_address): Likewise.
(parse_and_eval): Likewise.
* varobj.c (varobj_create): Pass const pointer to parse_exp_1.
(varobj_set_value): Likewise.
* cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
constify string handling.
Pass const pointers to parse_and_eval_address and
parse_to_comman_and_eval.
* cli/cli-utils.c (skip_to_space): Rename to ...
(skip_to_space_const): ... this. Handle const strings.
* cli/cli-utils.h (skip_to_space): Turn into macro which invokes
skip_to_space_const.
(skip_to_space_const): Declare.
* common/format.c (parse_format_string): Make "arg" const.
Handle const strings.
* common/format.h (parse_format_string): Make "arg" const.
* gdbserver/ax.c (ax_printf): Make "format" const.
* python/python.c (gdbpy_parse_and_eval): Do not make a copy
of the expression string.
|
|
Trimmed for brevity:
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" c-lang.o expprint.o utils.o valprint.o varobj.o -k 2>&1 1>/dev/null
../../src/gdb/c-lang.c: In function ‘parse_one_string’:
../../src/gdb/c-lang.c:540:8: error: pointer targets in passing argument 3 of ‘convert_between_encodings’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/c-lang.c:30:0:
../../src/gdb/charset.h:64:6: note: expected ‘const gdb_byte *’ but argument is of type ‘char *’
../../src/gdb/expprint.c: In function ‘print_subexp_standard’:
../../src/gdb/expprint.c:205:2: error: pointer targets in passing argument 3 of ‘current_language->la_printstr’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/expprint.c:205:2: note: expected ‘const gdb_byte *’ but argument is of type ‘char *’
cc1: all warnings being treated as errors
make: *** [expprint.o] Error 1
../../src/gdb/utils.c: In function ‘host_char_to_target’:
../../src/gdb/utils.c:1474:9: error: pointer targets in passing argument 3 of ‘convert_between_encodings’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/varobj.c: In function ‘value_get_print_value’:
../../src/gdb/varobj.c:2934:8: error: pointer targets in return differ in signedness [-Werror=pointer-sign]
../../src/gdb/varobj.c:2968:12: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
../../src/gdb/varobj.c:2971:3: error: pointer targets in return differ in signedness [-Werror=pointer-sign]
cc1: all warnings being treated as errors
make: *** [varobj.o] Error 1
As with the previous patch, the encoding conversion code works with
gdb_byte arrays as the generic buffers that hold strings of any
encoding/width. This patch adds casts where appropriate.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* c-lang.c (parse_one_string): Cast argument to gdb_byte *.
* expprint.c (print_subexp_standard): Likewise.
* utils.c (host_char_to_target): Likewise.
* valprint.c (generic_emit_char, generic_printstr): Likewise.
* varobj.c (value_get_print_value): Change type of local to char*.
Cast it gdb_byte * in call to language printer.
|
|
* charset.c (intermediate_encoding): Remove unused i.
* completer.c (signal_completer): Remove unused i.
* continuations.c (discard_my_continuations_1): Remove unused
continuation_ptr.
* corelow.c (core_close): Remove unuseD name.
(get_core_siginfo): Remove unused pid.
* cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
i, cps.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
(loclist_describe_location): Remove unused first.
* event-top.c (command_line_handler): Remove unused got_eof.
* exec.c (exec_close_1): Remove unused need_symtab_cleanup.
(resize_section_table): Remove unused old_value.
* gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
* gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
* i386-tdep.c (i386_process_record): Remove unused rex.
* infcmd.c (get_return_value): Remove unused uiout.
* jv-lang.c (type_from_class): Remove unused is_array.
* jv-valprint.c (java_val_print): Remove unused i.
* linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
* linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
* m2-typeprint.c (m2_print_type): Remove unused code.
* macroexp.c (get_character_constant): Remove unused body_start.
(macro_stringify): Remove unused result.
* objc-lang.c (find_methods): Remove unused gdbarch.
* objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
* regcache.c (regcache_cooked_read): Remove unused gdbarch.
* stack.c (print_frame_args): Remove unused summary.
* thread.c (thread_apply_command): Remove unused p.
* valarith.c (value_x_unop): Remove unused mangle_ptr.
* valops.c (search_struct_method): Remove unused skip.
* valprint.c (generic_val_print): Remove unused byte_order.
* varobj.c (varobj_update): Remove unused changed.
* cli/cli-cmds.c (complete_command): Remove unused next_item.
(alias_command): Remove unused c.
* mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
* mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
format.
(mi_cmd_data_write_memory): Remove unused word_format.
(mi_cmd_data_write_memory_bytes): Remove unused r.
* python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
p_start, p_end.
* python/python.c (_initialize_python): Remove unused cmd_name, cmd.
* tui/tui-disasm.c (tui_set_disassem_content): Remove unused
line_width.
Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00766.html
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
* NEWS: Mention Python 3 support.
* varobj.c (value_get_print_value): Use
python_string_to_target_string.
* python/py-block.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
* python/py-breakpoint.c: Ditto.
* python/py-cmd.c: Ditto.
* python/py-event.c: Ditto.
* python/py-event.h: Ditto.
* python/py-evtregistry.c: Ditto.
* python/py-finishbreakpoint.c: Ditto.
* python/py-frame.c: Ditto.
* python/py-function.c: Ditto.
* python/py-infthread.c: Ditto.
* python/py-lazy-string.c: Ditto.
* python/py-progspace.c: Ditto.
* /python/py-symbol.c: Ditto.
* python/py-evts.c: (gdbpy_initialize_py_events): Add module
initialization for Python 3.
* python/py-inferior.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(infpy_read_memory): Return memoryview object if Python 3.
(infpy_write_memory): Use "s*" operand parsing code for Python 3.
(infpy_search_memory): Ditto.
(get_buffer): New function for Python 3.
* python/py-objfile.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(objfpy_dealloc): Use Py_TYPE to call tp_free.
* python/py-param.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(get_attr): Use PyUnicode_CompareWithASCIIString if Python 3.
(set_attr): Ditto.
* python/py-prettyprint.c (print_string_repr): use PyBytes methods
instead of PyString methods if Python 3.
(print_children): Skip push_dummy_python_frame call if Python 3.
* python/py-symtab.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(salpy_dealloc): Use Py_TYPE to call tp_free.
* python/py-type.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(field_dealloc): Use Py_TYPE to call tp_free.
(typy_dealloc): Ditto.
(type_object_as_number): Adjust struct initializations for
differences in layout for Python 2 vs. Python 3.
* python/py-utils.c (python_string_to_unicode): Omit non-Unicode
string case for Python 3.
(unicode_to_encoded_python_string): Shorten code (no functional
change).
(python_string_to_target_python_string): Comment that in Python 3
returned value is a Python "bytes" type.
(gdbpy_is_string): Omit non-Unicode string check in Python 3.
(gdb_py_object_from_longest): Omit non-long integer case in Python
3.
(gdb_py_object_from_ulongest): Ditto.
* python/py-value.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(valpy_dealloc): Use Py_TYPE to call tp_free.
(valpy_int): Omit function if Python 3.
(convert_value_from_python): Use "%S" format (Python object as a
string) if Python 3.
(value_object_as_number): Adjust struct initializations for
differences in layout for Python 2 vs. Python 3.
* python/python-config.py: Adjust syntax for Python 3
compatibility.
Include "sys.abiflags" string as part of python library name, if
that attribute exists (Python 3).
* python/python-internal.h (IS_PY3): Define if Python 3.
(Py_TPFLAGS_HAVE_ITER, Py_TPFLAGS_CHECKTYPES): Define with
placeholder value if Python 3.
(PyInt_Check, PyInt_FromLong, PyInt_AsLong, PyString_FromString,
PyString_Decode, PyString_FromFormat, PyString_Check): Define as
analogous Python 3 API function if Python 3.
(PyVarObject_HEAD_INIT): Define if not already defined.
(Py_TYPE): Ditto.
* python/python.c (eval_python_command): Omit Py_FlushLine call if
Python 3.
Check return values of all Python API calls for error.
Supply dummy "python" and "python-interactive" commands if Python
initialization failed.
(_initialize_python): Convert argc to wchar_t** if Python 3.
Add module initialization for Python 3.
(finish_python_initialization): Pass wchar_t * argument to
PySys_SetPath if Python 3.
* python/lib/gdb/__init__.py: Define "reload" if Python 3.
(_GdbFile): New class for common output file behavior.
(GdbOutFile): Subclass from _GdbFile.
(GdbOutputErrorFile): Ditto.
(auto_load_packages): Adjust syntax for Python 3 compatibility.
* python/lib/gdb/printing.py: Define basestr and int if Python 3.
* python/lib/gdb/prompt.py: Use sorted() function rather than
sort() method.
* python/lib/gdb/command/explore.py: Define raw_input if Python 3.
Adjust syntax for Python 3 compatibility.
* python/lib/gdb/command/pretty_printers.py: Use sorted() function
rather than sort() method.
Adjust syntax for Python 3 compatibility.
* python/lib/gdb/command/type_printers.py: Ditto.
* doc/gdb.texinfo (Inferior.read_memory): Mention that the return
value is a memoryview object if Python 3.
|
|
(write_ambiguous_var, write_var_from_sym): Make blocks const.
* ada-lang.c (replace_operator_with_call)
(find_old_style_renaming_symbol): Make blocks const.
* ada-lang.h (ada_find_renaming_symbol): Update.
(struct ada_symbol_info) <block>: Now const.
* breakpoint.c (watch_command_1): Update.
* breakpoint.h (struct watchpoint) <exp_valid_block,
cond_exp_valid_block>: Now const.
* c-exp.y (classify_inner_name, classify_name): Make block
argument const.
* expprint.c (print_subexp_standard) <OP_VAR_VALUE>: Make 'b'
const.
* expression.h (innermost_block, parse_exp_1): Update.
(union exp_element) <block>: Now const.
* gdbtypes.c (lookup_template_type, lookup_enum, lookup_union)
(lookup_struct): Make block argument const.
* gdbtypes.h (lookup_template_type): Update.
* go-exp.y (classify_name, classify_packaged_name)
(package_name_p): Make block argument const.
* objc-lang.c (lookup_struct_typedef): Make block argument const.
* objc-lang.h (lookup_struct_typedef): Update.
* parse.c (parse_exp_in_context, parse_exp_1)
(write_exp_elt_block): Make block arguments const.
(expression_context_block, innermost_block): Now const.
* parser-defs.h (write_exp_elt_block): Update.
(expression_context_block, innermost_block, block_found): Now
const.
* printcmd.c (struct display) <block>: Now const.
* symtab.h (lookup_struct, lookup_union, lookup_enum): Update.
* valops.c (address_of_variable): Make block argument const.
* value.h (value_of_variable): Update.
* varobj.c (struct varobj_root) <valid_block>: Now const.
|
|
* varobj.c (update_dynamic_varobj_children): Don't call
PyIter_Check.
gdb/testsuite
* gdb.python/py-mi.exp: Add test for printer whose children
are a list.
* gdb.python/py-prettyprint.c (struct children_as_list): New.
(main): New variable children_as_list.
* gdb.python/py-prettyprint.py (class pp_children_as_list):
New.
(register_pretty_printers): Register new printer.
|
|
* dwarf2loc.c (entry_values_debug): Add 'unsigned'.
(_initialize_dwarf2loc): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* dwarf2loc.h: Update the declaration of 'entry_values_debug'.
* dwarf2read.c (dwarf2_die_debug): Add 'unsigned'.
(_initialize_dwarf2_read): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* darwin-nat.c (dwarwin_debug_flag): Add 'unsigned'.
(_initialize_darwin_inferior): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* frame.c (frame_debug): Add 'unsigned'.
(_intialize_frame): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* frame.h: Update the declaration of 'frame_debug'.
* gdbtypes.c (overload_debug): Add 'unsigned'.
(_initialize_gdbtypes): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* inferior.h: Update declaration of 'debug_infrun'.
* infrun.c (debug_infrun): Add 'unsigned'.
(_initialize_infrun): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* jit.c (jit_debug): Add 'unsigned'.
(_initialize_jit): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* linux-nat.c (debug_linux_nat): Add 'unsigned'.
(_initialize_linux_nat): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* linux-thread-db.c (libthread_db_debug): Add 'unsigned'.
(_initialize_thread_db): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* machoread.c (mach_o_debug_level): Add 'unsigned'.
(_initialize_machoread): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* mi/mi-cmd-var.c: Update the declaration of 'varobjdebug'.
* microblaze-tdep.c (microblaze_debug_flag): Add 'unsigned'.
(_initialize_microblaze_tdep): Call add_setshow_zuinteger_cmd
intead of add_setshow_zinteger_cmd.
* mips-tdep.c (mips_debug): Add 'unsigned'.
(_initialize_mips_tdep): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* monitor.c (monitor_debug): Add 'unsigned'.
(_initialize_remote_monitors): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* observer.c (observer_debug): Add 'unsigned'.
(_initialize_observer): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* parse.c (expressiondebug): Add 'unsigned'.
(_initialize_parse): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* record.c (record_debug): Add 'unsigned'.
(_initialize_record): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* record.h: Update the declaration of 'record_debug'.
* stap-probe.c (stap_expression_debug): Add 'unsigned'.
(_initialize_stap_probe): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* serial.c (global_serial_debug_p): Add 'unsigned'.
(_initialize_serial): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* solib-dsbt.c (solib_dsbt_debug): Add 'unsigned'.
(_initialize_dsbt_solib): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* solib-frv.c (solib_frv_debug): Add 'unsigned'.
(_initialize_frv_solib): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* target.c (targetdebug): Add 'unsigned'.
(initialize_targets): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* valops.c (overload_debug): Add 'unsigned'.
* varobj.c (varobjdebug): Add 'unsigned'.
(_initialize_varobj): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* xtensa-tdep.c (xtensa_debug_level): Add 'unsigned'.
(_initialize_xtensa_tdep): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* arch-utils.h: Remove the declaration of 'gdbarch_debug'.
* gdbarch.sh (gdbarch_debug): Add 'unsigned'.
(extern void _initialize_gdbarch): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* gdbarch.c, gdbarch.h: Re-generated.
|
|
Re-evaluate floating variables as part of variable invalidate to remove
references to type structures that might have been freed.
|
|
* ax-gdb.c (gen_expr) <OP_TYPEOF, OP_DECLTYPE>: New cases.
* breakpoint.c (watchpoint_exp_is_const) <OP_TYPEOF,
OP_DECLTYPE>: New cases.
* c-exp.y (TYPEOF, DECLTYPE): New tokens.
(type_exp): Add new productions.
(ident_tokens): Add __typeof__, typeof, __typeof, __decltype,
and decltype.
* eval.c (evaluate_subexp_standard) <OP_TYPEOF, OP_DECLTYPE>:
New case.
* expprint.c (dump_subexp_body_standard) <OP_TYPEOF,
OP_DECLTYPE>: New case.
* parse.c (operator_length_standard) <OP_TYPEOF, OP_DECLTYPE>:
New case.
* std-operator.def (OP_TYPEOF, OP_DECLTYPE): New constants.
* varobj.c (varobj_create): Handle OP_TYPEOF, OP_DECLTYPE.
gdb/testsuite
* gdb.cp/casts.exp: Add tests for typeof and decltype.
* gdb.cp/casts.cc (decltype): New function.
(main): Use it.
|
