| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In Ada, the programmer can request that a range type with a non-zero
base be stored in the minimal number of bits required for the range.
This is done by biasing the values; so, for example, a range of -7..-4
may be stored as two bits with a bias of -7.
This patch implements this for gdb. It is done by adding a bias to
struct range_bounds and then adjusting a few spots to handle this.
The test case is written to use -fgnat-encodings=minimal, but a future
compiler patch will change the compiler to emit DW_AT_GNU_bias with
-fgnat-encodings=gdb. It seemed good to get the gdb patch in first.
Tested on x86-64 Fedora 29; plus a variety of targets using AdaCore's
internal test suite.
gdb/ChangeLog
2019-09-03 Tom Tromey <tromey@adacore.com>
* ada-valprint.c (ada_val_print_num): Don't recurse for range
types.
(has_negatives): Unbias a range type bound.
* dwarf2read.c (read_subrange_type): Handle DW_AT_GNU_bias.
* gdbtypes.c (operator==): Handle new field.
(create_range_type): Add "bias" parameter.
(create_static_range_type, resolve_dynamic_range): Update.
* gdbtypes.h (struct range_bounds) <bias>: New member.
(create_range_type): Add bias parameter.
* printcmd.c (print_scalar_formatted): Unbias range types.
* value.c (unpack_long): Unbias range types.
(pack_long): Bias range types.
gdb/testsuite/ChangeLog
2019-09-03 Tom Tromey <tromey@adacore.com>
* gdb.ada/bias.exp: New file.
* gdb.ada/bias/bias.adb: New file.
* gdb.ada/print_chars.exp: Add regression test.
* gdb.ada/print_chars/foo.adb (My_Character): New type.
(MC): New variable.
|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
I noticed a couple of spots using concat that could use xstrdup
instead. This patch fixes these.
gdb/ChangeLog
2019-06-16 Tom Tromey <tom@tromey.com>
* coffread.c (process_coff_symbol): Use xstrdup.
* value.c (create_internalvar): Use xstrdup.
|
|
Adds an utility function to make it shorter to write the common case
of wrapping an xstrdup with a unique_xmalloc_ptr, and uses it
throughout.
Note: I tried to put this in common/common-utils.h near skip_spaces,
etc. but that is included in common/common-defs.h before
common/gdb_unique_ptr.h is included, so it would fail to compile
because gdb::unique_xmalloc_ptr isn't defined at that point yet. I
tried moving the gdb_unique_ptr.h inclusion before common-utils.h, but
that doesn't work because gdb_unique_ptr.h depends on common-utils.h
for xfree.
gdb/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* common/gdb_unique_ptr.h (make_unique_xstrdup): New.
* ada-lang.c (catch_ada_completer): Use make_unique_xstrdup.
* breakpoint.c (condition_completer): Likewise.
* cli/cli-dump.c (scan_expression): Likewise.
* common/filestuff.c (mkdir_recursive): Likewise.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up)
* common/pathstuff.c (gdb_realpath, gdb_realpath_keepfile)
(gdb_abspath): Likewise.
* compile/compile-cplus-types.c
(compile_cplus_instance::decl_name): Likewise.
* completer.c (complete_explicit_location):
(signal_completer, reg_or_group_completer_1): Likewise.
* cp-support.c (cp_remove_params_if_any): Likewise.
* fbsd-tdep.c (fbsd_core_vnode_path): Likewise.
* guile/scm-safe-call.c (gdbscm_safe_eval_string): Likewise.
* infcmd.c (strip_bg_char): Likewise.
* linespec.c (copy_token_string): Likewise.
* mi/mi-main.c (output_cores): Likewise.
* psymtab.c (psymtab_search_name):
* symfile.c (test_set_ext_lang_command): Likewise.
* target.c (target_fileio_read_stralloc): Likewise.
* tui/tui-regs.c (tui_reggroup_completer): Likewise.
* value.c (complete_internalvar): Likewise.
gdb/gdbserver/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* server.c (captured_main): Use make_unique_xstrdup.
|
|
This renames the gdb exception types. The old types were only needed
due to the macros in common-exception.h that are now gone.
The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem
needed, so this patch removes it entirely.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL):
Remove.
(gdb_exception_error): Rename from
gdb_exception_RETURN_MASK_ERROR.
(gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT.
(gdb_quit_bad_alloc): Update.
* aarch64-tdep.c: Update.
* ada-lang.c: Update.
* ada-typeprint.c: Update.
* ada-valprint.c: Update.
* amd64-tdep.c: Update.
* arch-utils.c: Update.
* break-catch-throw.c: Update.
* breakpoint.c: Update.
* btrace.c: Update.
* c-varobj.c: Update.
* cli/cli-cmds.c: Update.
* cli/cli-interp.c: Update.
* cli/cli-script.c: Update.
* common/common-exceptions.c: Update.
* common/new-op.c: Update.
* common/selftest.c: Update.
* compile/compile-c-symbols.c: Update.
* compile/compile-cplus-symbols.c: Update.
* compile/compile-object-load.c: Update.
* compile/compile-object-run.c: Update.
* completer.c: Update.
* corelow.c: Update.
* cp-abi.c: Update.
* cp-support.c: Update.
* cp-valprint.c: Update.
* darwin-nat.c: Update.
* disasm-selftests.c: Update.
* dtrace-probe.c: Update.
* dwarf-index-cache.c: Update.
* dwarf-index-write.c: Update.
* dwarf2-frame-tailcall.c: Update.
* dwarf2-frame.c: Update.
* dwarf2loc.c: Update.
* dwarf2read.c: Update.
* eval.c: Update.
* event-loop.c: Update.
* event-top.c: Update.
* exec.c: Update.
* f-valprint.c: Update.
* fbsd-tdep.c: Update.
* frame-unwind.c: Update.
* frame.c: Update.
* gdbtypes.c: Update.
* gnu-v3-abi.c: Update.
* guile/guile-internal.h: Update.
* guile/scm-block.c: Update.
* guile/scm-breakpoint.c: Update.
* guile/scm-cmd.c: Update.
* guile/scm-disasm.c: Update.
* guile/scm-frame.c: Update.
* guile/scm-lazy-string.c: Update.
* guile/scm-math.c: Update.
* guile/scm-param.c: Update.
* guile/scm-ports.c: Update.
* guile/scm-pretty-print.c: Update.
* guile/scm-symbol.c: Update.
* guile/scm-symtab.c: Update.
* guile/scm-type.c: Update.
* guile/scm-value.c: Update.
* i386-linux-tdep.c: Update.
* i386-tdep.c: Update.
* inf-loop.c: Update.
* infcall.c: Update.
* infcmd.c: Update.
* infrun.c: Update.
* jit.c: Update.
* language.c: Update.
* linespec.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* main.c: Update.
* mi/mi-cmd-break.c: Update.
* mi/mi-cmd-stack.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* objc-lang.c: Update.
* p-valprint.c: Update.
* parse.c: Update.
* ppc-linux-tdep.c: Update.
* printcmd.c: Update.
* python/py-arch.c: Update.
* python/py-breakpoint.c: Update.
* python/py-cmd.c: Update.
* python/py-finishbreakpoint.c: Update.
* python/py-frame.c: Update.
* python/py-framefilter.c: Update.
* python/py-gdb-readline.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* python/py-lazy-string.c: Update.
* python/py-linetable.c: Update.
* python/py-objfile.c: Update.
* python/py-param.c: Update.
* python/py-prettyprint.c: Update.
* python/py-progspace.c: Update.
* python/py-record-btrace.c: Update.
* python/py-record.c: Update.
* python/py-symbol.c: Update.
* python/py-type.c: Update.
* python/py-unwind.c: Update.
* python/py-utils.c: Update.
* python/py-value.c: Update.
* python/python.c: Update.
* record-btrace.c: Update.
* record-full.c: Update.
* remote-fileio.c: Update.
* remote.c: Update.
* riscv-tdep.c: Update.
* rs6000-aix-tdep.c: Update.
* rs6000-tdep.c: Update.
* rust-exp.y: Update.
* rust-lang.c: Update.
* s390-tdep.c: Update.
* selftest-arch.c: Update.
* solib-dsbt.c: Update.
* solib-frv.c: Update.
* solib-spu.c: Update.
* solib-svr4.c: Update.
* solib.c: Update.
* sparc64-linux-tdep.c: Update.
* stack.c: Update.
* symfile-mem.c: Update.
* symmisc.c: Update.
* target.c: Update.
* thread.c: Update.
* top.c: Update.
* tracefile-tfile.c: Update.
* tui/tui.c: Update.
* typeprint.c: Update.
* unittests/cli-utils-selftests.c: Update.
* unittests/parse-connection-spec-selftests.c: Update.
* valops.c: Update.
* valprint.c: Update.
* value.c: Update.
* varobj.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* xml-support.c: Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* gdbreplay.c: Update.
* linux-low.c: Update.
* server.c: Update.
|
|
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
|
|
This changes the exception's "message" member to be a shared_ptr
wrapping a std::string. This allows removing the stack of exception
messages, because now exceptions will self-destruct when needed. This
also adds a noexcept copy constructor and operator= to gdb_exception,
plus a "what" method.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c (gdb_xml_parser::parse): Update.
* x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update.
* value.c (show_convenience): Update.
* unittests/cli-utils-selftests.c (test_number_or_range_parser)
(test_parse_flags_qcs): Update.
* thread.c (thr_try_catch_cmd): Update.
* target.c (target_translate_tls_address): Update.
* stack.c (print_frame_arg, read_frame_local, read_frame_arg)
(info_frame_command_core, frame_apply_command_count): Update.
* rust-exp.y (rust_lex_exception_test): Update.
* riscv-tdep.c (riscv_print_one_register_info): Update.
* remote.c (remote_target::enable_btrace): Update.
* record-btrace.c (record_btrace_enable_warn): Update.
* python/py-utils.c (gdbpy_convert_exception): Update.
* printcmd.c (do_one_display, print_variable_and_value): Update.
* mi/mi-main.c (mi_print_exception): Update.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Use SCOPE_EXIT.
* mi/mi-cmd-stack.c (list_arg_or_local): Update.
* linux-nat.c (linux_nat_target::attach): Update.
* linux-fork.c (class scoped_switch_fork_info): Update.
* infrun.c (displaced_step_prepare): Update.
* infcall.c (call_function_by_hand_dummy): Update.
* guile/scm-exception.c (gdbscm_scm_from_gdb_exception): Update.
* gnu-v3-abi.c (print_one_vtable): Update.
* frame.c (get_prev_frame_always): Update.
* f-valprint.c (info_common_command_for_block): Update.
* exec.c (try_open_exec_file): Update.
* exceptions.c (print_exception, exception_print)
(exception_fprintf, exception_print_same): Update.
* dwarf2-frame.c (dwarf2_build_frame_info): Update.
* dwarf-index-cache.c (index_cache::store)
(index_cache::lookup_gdb_index): Update.
* darwin-nat.c (maybe_cache_shell): Update.
* cp-valprint.c (cp_print_value_fields): Update.
* compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol)
(gcc_cplus_symbol_address): Update.
* compile/compile-c-symbols.c (gcc_convert_symbol)
(gcc_symbol_address, generate_c_for_for_one_variable): Update.
* common/selftest.c: Update.
* common/common-exceptions.h (struct gdb_exception) <message>: Now
a std::string.
(exception_try_scope_entry, exception_try_scope_exit): Don't
declare.
(struct exception_try_scope): Remove.
(TRY): Don't use exception_try_scope.
(struct gdb_exception): Add constructor, operator=.
<what>: New method.
(struct gdb_exception_RETURN_MASK_ALL)
(struct gdb_exception_RETURN_MASK_ERROR)
(struct gdb_exception_RETURN_MASK_QUIT): Add constructor.
(struct gdb_quit_bad_alloc): Update.
* common/common-exceptions.c (exception_none): Change
initializer.
(struct catcher) <state, exception>: Initialize inline.
<prev>: Remove member.
(current_catcher): Remove.
(catchers): New global.
(exceptions_state_mc_init): Simplify.
(catcher_pop): Remove.
(exceptions_state_mc, exceptions_state_mc_catch): Update.
(try_scope_depth, exception_try_scope_entry)
(exception_try_scope_exit): Remove.
(throw_exception_sjlj): Update.
(exception_messages, exception_messages_size): Remove.
(throw_it): Simplify.
(gdb_exception_sliced_copy): Remove.
(throw_exception_cxx): Update.
* cli/cli-script.c (script_from_file): Update.
* breakpoint.c (insert_bp_location, update_breakpoint_locations):
Update.
* ada-valprint.c (ada_val_print): Update.
* ada-lang.c (ada_to_fixed_type_1, ada_exception_name_addr)
(create_excep_cond_exprs): Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c (handle_btrace_general_set, handle_qxfer_btrace)
(handle_qxfer_btrace_conf, detach_or_kill_for_exit_cleanup)
(captured_main, main): Update.
* gdbreplay.c (main): Update.
|
|
Add two new internal functions $_cimag and $_creal that extract the
imaginary and real parts of a complex value.
These internal functions can take a complex value of any type 'float
complex', 'double complex', or 'long double complex' and return a
suitable floating point value 'float', 'double', or 'long double'.
So we can now do this:
(gdb) p z1
$1 = 1.5 + 4.5 * I
(gdb) p $_cimag (z1)
$4 = 4.5
(gdb) p $_creal (z1)
$4 = 1.5
The components of a complex value are not strictly named types in
DWARF, as the complex type is itself the base type. However, once we
are able to extract the components it makes sense to be able to ask
what the type of these components is and get a sensible answer back,
rather than the error we would currently get. Currently GDB says:
(gdb) ptype z1
type = complex double
(gdb) p $_cimag (z1)
$4 = 4.5
(gdb) ptype $
type = <invalid type code 9>
With the changes in dwarf2read.c, GDB now says:
(gdb) ptype z1
type = complex double
(gdb) p $_cimag (z1)
$4 = 4.5
(gdb) ptype $
type = double
Which seems to make more sense.
gdb/ChangeLog:
* NEWS: Mention new internal functions.
* dwarf2read.c (dwarf2_init_complex_target_type): New function.
(read_base_type): Use dwarf2_init_complex_target_type.
* value.c (creal_internal_fn): New function.
(cimag_internal_fn): New function.
(_initialize_values): Register new internal functions.
gdb/doc/ChangeLog:
* gdb.texinfo (Convenience Funs): Document '$_creal' and
'$_cimag'.
gdb/testsuite/ChangeLog:
* gdb.base/complex-parts.c: New file.
* gdb.base/complex-parts.exp: New file.
|
|
When the user exits GDB, we might still have some allocated values in
the chain, which, in specific scenarios, can cause problems when GDB
attempts to destroy them in "quit_force". For example, see the bug
reported at:
https://bugzilla.redhat.com/show_bug.cgi?id=1690120
And the thread starting at:
https://sourceware.org/ml/gdb-patches/2019-03/msg00475.html
Message-ID: <87r2azkhmq.fsf@redhat.com>
In order to avoid that, and to be more aware of our allocated
resources, this commit implements a new function "finalize_values" and
calls it from inside "quit_force".
Tested by the BuildBot.
2019-04-01 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* top.c (quit_force): Call 'finalize_values'.
* value.c (finalize_values): New function.
* value.h (finalize_values): Declare.
|
|
The function value_from_host_double can be moved from f-lang.c into
value.c as a generally useful function, and then used more widely.
Tested on X86-64/GNU Linux with no regressions.
gdb/ChangeLog:
* f-lang.c (value_from_host_double): Moved to...
* value.c (value_from_host_double): ...here.
* value.h (value_from_host_double): Declare.
* guile/scm-math.c (vlscm_convert_typed_number): Use
value_from_host_double.
(vlscm_convert_number): Likewise.
* guile/scm-value.c (gdbscm_value_to_real): Likewise.
* python/py-value.c (convert_value_from_python): Likewise.
|
|
This applies ATTRIBUTE_UNUSED_RESULT to ref_ptr::release and updates a
few spots to comply. I believe one use in install_default_visualizer
was in error, fixed by this patch.
gdb/ChangeLog
2019-03-05 Tom Tromey <tromey@adacore.com>
* varobj.c (update_dynamic_varobj_children): Update.
(install_default_visualizer): Use reset, not release.
* value.c (set_internalvar): Update.
* dwarf2loc.c (value_of_dwarf_reg_entry): Update.
* common/gdb_ref_ptr.h (class ref_ptr) <release>: Add
ATTRIBUTE_UNUSED_RESULT.
|
|
This changes all includes to use the form "common/filename.h" rather
than just "filename.h". This was written by a script.
gdb/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* xtensa-linux-nat.c: Fix common/ includes.
* xml-support.h: Fix common/ includes.
* xml-support.c: Fix common/ includes.
* x86-linux-nat.c: Fix common/ includes.
* windows-nat.c: Fix common/ includes.
* varobj.h: Fix common/ includes.
* varobj.c: Fix common/ includes.
* value.c: Fix common/ includes.
* valops.c: Fix common/ includes.
* utils.c: Fix common/ includes.
* unittests/xml-utils-selftests.c: Fix common/ includes.
* unittests/utils-selftests.c: Fix common/ includes.
* unittests/unpack-selftests.c: Fix common/ includes.
* unittests/tracepoint-selftests.c: Fix common/ includes.
* unittests/style-selftests.c: Fix common/ includes.
* unittests/string_view-selftests.c: Fix common/ includes.
* unittests/scoped_restore-selftests.c: Fix common/ includes.
* unittests/scoped_mmap-selftests.c: Fix common/ includes.
* unittests/scoped_fd-selftests.c: Fix common/ includes.
* unittests/rsp-low-selftests.c: Fix common/ includes.
* unittests/parse-connection-spec-selftests.c: Fix common/
includes.
* unittests/optional-selftests.c: Fix common/ includes.
* unittests/offset-type-selftests.c: Fix common/ includes.
* unittests/observable-selftests.c: Fix common/ includes.
* unittests/mkdir-recursive-selftests.c: Fix common/ includes.
* unittests/memrange-selftests.c: Fix common/ includes.
* unittests/memory-map-selftests.c: Fix common/ includes.
* unittests/lookup_name_info-selftests.c: Fix common/ includes.
* unittests/function-view-selftests.c: Fix common/ includes.
* unittests/environ-selftests.c: Fix common/ includes.
* unittests/copy_bitwise-selftests.c: Fix common/ includes.
* unittests/common-utils-selftests.c: Fix common/ includes.
* unittests/cli-utils-selftests.c: Fix common/ includes.
* unittests/array-view-selftests.c: Fix common/ includes.
* ui-file.c: Fix common/ includes.
* tui/tui-io.c: Fix common/ includes.
* tracepoint.h: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* tracefile-tfile.c: Fix common/ includes.
* top.h: Fix common/ includes.
* top.c: Fix common/ includes.
* thread.c: Fix common/ includes.
* target/waitstatus.h: Fix common/ includes.
* target/waitstatus.c: Fix common/ includes.
* target.h: Fix common/ includes.
* target.c: Fix common/ includes.
* target-memory.c: Fix common/ includes.
* target-descriptions.c: Fix common/ includes.
* symtab.h: Fix common/ includes.
* symfile.c: Fix common/ includes.
* stap-probe.c: Fix common/ includes.
* spu-linux-nat.c: Fix common/ includes.
* sparc-nat.c: Fix common/ includes.
* source.c: Fix common/ includes.
* solib.c: Fix common/ includes.
* solib-target.c: Fix common/ includes.
* ser-unix.c: Fix common/ includes.
* ser-tcp.c: Fix common/ includes.
* ser-pipe.c: Fix common/ includes.
* ser-base.c: Fix common/ includes.
* selftest-arch.c: Fix common/ includes.
* s12z-tdep.c: Fix common/ includes.
* rust-exp.y: Fix common/ includes.
* rs6000-aix-tdep.c: Fix common/ includes.
* riscv-tdep.c: Fix common/ includes.
* remote.c: Fix common/ includes.
* remote-notif.h: Fix common/ includes.
* remote-fileio.h: Fix common/ includes.
* remote-fileio.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* record-btrace.c: Fix common/ includes.
* python/python.c: Fix common/ includes.
* python/py-type.c: Fix common/ includes.
* python/py-inferior.c: Fix common/ includes.
* progspace.h: Fix common/ includes.
* producer.c: Fix common/ includes.
* procfs.c: Fix common/ includes.
* proc-api.c: Fix common/ includes.
* printcmd.c: Fix common/ includes.
* ppc-linux-nat.c: Fix common/ includes.
* parser-defs.h: Fix common/ includes.
* osdata.c: Fix common/ includes.
* obsd-nat.c: Fix common/ includes.
* nat/x86-linux.c: Fix common/ includes.
* nat/x86-linux-dregs.c: Fix common/ includes.
* nat/x86-dregs.h: Fix common/ includes.
* nat/x86-dregs.c: Fix common/ includes.
* nat/ppc-linux.c: Fix common/ includes.
* nat/mips-linux-watch.h: Fix common/ includes.
* nat/mips-linux-watch.c: Fix common/ includes.
* nat/linux-waitpid.c: Fix common/ includes.
* nat/linux-ptrace.h: Fix common/ includes.
* nat/linux-ptrace.c: Fix common/ includes.
* nat/linux-procfs.c: Fix common/ includes.
* nat/linux-personality.c: Fix common/ includes.
* nat/linux-osdata.c: Fix common/ includes.
* nat/linux-namespaces.c: Fix common/ includes.
* nat/linux-btrace.h: Fix common/ includes.
* nat/linux-btrace.c: Fix common/ includes.
* nat/fork-inferior.c: Fix common/ includes.
* nat/amd64-linux-siginfo.c: Fix common/ includes.
* nat/aarch64-sve-linux-ptrace.c: Fix common/ includes.
* nat/aarch64-linux.c: Fix common/ includes.
* nat/aarch64-linux-hw-point.h: Fix common/ includes.
* nat/aarch64-linux-hw-point.c: Fix common/ includes.
* namespace.h: Fix common/ includes.
* mips-linux-tdep.c: Fix common/ includes.
* minsyms.c: Fix common/ includes.
* mi/mi-parse.h: Fix common/ includes.
* mi/mi-main.c: Fix common/ includes.
* mi/mi-cmd-env.c: Fix common/ includes.
* memrange.h: Fix common/ includes.
* memattr.c: Fix common/ includes.
* maint.h: Fix common/ includes.
* maint.c: Fix common/ includes.
* main.c: Fix common/ includes.
* machoread.c: Fix common/ includes.
* location.c: Fix common/ includes.
* linux-thread-db.c: Fix common/ includes.
* linux-nat.c: Fix common/ includes.
* linux-fork.c: Fix common/ includes.
* inline-frame.c: Fix common/ includes.
* infrun.c: Fix common/ includes.
* inflow.c: Fix common/ includes.
* inferior.h: Fix common/ includes.
* inferior.c: Fix common/ includes.
* infcmd.c: Fix common/ includes.
* inf-ptrace.c: Fix common/ includes.
* inf-child.c: Fix common/ includes.
* ia64-linux-nat.c: Fix common/ includes.
* i387-tdep.c: Fix common/ includes.
* i386-tdep.c: Fix common/ includes.
* i386-linux-tdep.c: Fix common/ includes.
* i386-linux-nat.c: Fix common/ includes.
* i386-go32-tdep.c: Fix common/ includes.
* i386-fbsd-tdep.c: Fix common/ includes.
* i386-fbsd-nat.c: Fix common/ includes.
* guile/scm-type.c: Fix common/ includes.
* guile/guile.c: Fix common/ includes.
* go32-nat.c: Fix common/ includes.
* gnu-nat.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbarch-selftests.c: Fix common/ includes.
* gdb_usleep.c: Fix common/ includes.
* gdb_select.h: Fix common/ includes.
* gdb_bfd.c: Fix common/ includes.
* gcore.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* findvar.c: Fix common/ includes.
* fbsd-nat.c: Fix common/ includes.
* event-top.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* dwarf2read.c: Fix common/ includes.
* dwarf2loc.c: Fix common/ includes.
* dwarf2-frame.c: Fix common/ includes.
* dwarf-index-cache.c: Fix common/ includes.
* dtrace-probe.c: Fix common/ includes.
* disasm-selftests.c: Fix common/ includes.
* defs.h: Fix common/ includes.
* csky-tdep.c: Fix common/ includes.
* cp-valprint.c: Fix common/ includes.
* cp-support.h: Fix common/ includes.
* cp-support.c: Fix common/ includes.
* corelow.c: Fix common/ includes.
* completer.h: Fix common/ includes.
* completer.c: Fix common/ includes.
* compile/compile.c: Fix common/ includes.
* compile/compile-loc2c.c: Fix common/ includes.
* compile/compile-cplus-types.c: Fix common/ includes.
* compile/compile-cplus-symbols.c: Fix common/ includes.
* command.h: Fix common/ includes.
* cli/cli-dump.c: Fix common/ includes.
* cli/cli-cmds.c: Fix common/ includes.
* charset.c: Fix common/ includes.
* build-id.c: Fix common/ includes.
* btrace.h: Fix common/ includes.
* btrace.c: Fix common/ includes.
* breakpoint.h: Fix common/ includes.
* breakpoint.c: Fix common/ includes.
* ax.h:
(enum agent_op): Fix common/ includes.
* ax-general.c (struct aop_map): Fix common/ includes.
* ax-gdb.c: Fix common/ includes.
* auxv.c: Fix common/ includes.
* auto-load.c: Fix common/ includes.
* arm-tdep.c: Fix common/ includes.
* arch/riscv.c: Fix common/ includes.
* arch/ppc-linux-common.c: Fix common/ includes.
* arch/i386.c: Fix common/ includes.
* arch/arm.c: Fix common/ includes.
* arch/arm-linux.c: Fix common/ includes.
* arch/arm-get-next-pcs.c: Fix common/ includes.
* arch/amd64.c: Fix common/ includes.
* arch/aarch64.c: Fix common/ includes.
* arch/aarch64-insn.c: Fix common/ includes.
* arch-utils.c: Fix common/ includes.
* amd64-windows-tdep.c: Fix common/ includes.
* amd64-tdep.c: Fix common/ includes.
* amd64-sol2-tdep.c: Fix common/ includes.
* amd64-obsd-tdep.c: Fix common/ includes.
* amd64-nbsd-tdep.c: Fix common/ includes.
* amd64-linux-tdep.c: Fix common/ includes.
* amd64-linux-nat.c: Fix common/ includes.
* amd64-fbsd-tdep.c: Fix common/ includes.
* amd64-fbsd-nat.c: Fix common/ includes.
* amd64-dicos-tdep.c: Fix common/ includes.
* amd64-darwin-tdep.c: Fix common/ includes.
* agent.c: Fix common/ includes.
* ada-lang.h: Fix common/ includes.
* ada-lang.c: Fix common/ includes.
* aarch64-tdep.c: Fix common/ includes.
gdb/gdbserver/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* win32-low.c: Fix common/ includes.
* win32-i386-low.c: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* thread-db.c: Fix common/ includes.
* target.h: Fix common/ includes.
* symbol.c: Fix common/ includes.
* spu-low.c: Fix common/ includes.
* server.h: Fix common/ includes.
* server.c: Fix common/ includes.
* remote-utils.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* nto-x86-low.c: Fix common/ includes.
* notif.h: Fix common/ includes.
* mem-break.h: Fix common/ includes.
* lynx-low.c: Fix common/ includes.
* lynx-i386-low.c: Fix common/ includes.
* linux-x86-tdesc-selftest.c: Fix common/ includes.
* linux-x86-low.c: Fix common/ includes.
* linux-low.c: Fix common/ includes.
* inferiors.h: Fix common/ includes.
* i387-fp.c: Fix common/ includes.
* hostio.c: Fix common/ includes.
* hostio-errno.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbreplay.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* ax.c:
(enum gdb_agent_op): Fix common/ includes.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This replaces more pointer+length with gdb::array_view. This time,
around invoke_xmethod, and then propagating the fallout around, which
inevitably leaks to the overload resolution code.
There are several places in the code that want to grab a slice of an
array, by advancing the array pointer, and decreasing the length
pointer. This patch introduces a pair of new
gdb::array_view::slice(...) methods to make that convenient and clear.
Unit test included.
gdb/ChangeLog:
2018-11-21 Pedro Alves <palves@redhat.com>
* common/array-view.h (array_view::splice(size_type, size_t)): New.
(array_view::splice(size_type)): New.
* eval.c (eval_call, evaluate_funcall): Adjust to use array_view.
* extension.c (xmethod_worker::get_arg_types): Adjust to return an
std::vector.
(xmethod_worker::get_result_type): Adjust to use gdb::array_view.
* extension.h: Include "common/array-view.h".
(xmethod_worker::invoke): Adjust to use gdb::array_view.
(xmethod_worker::get_arg_types): Adjust to return an std::vector.
(xmethod_worker::get_result_type): Adjust to use gdb::array_view.
(xmethod_worker::do_get_arg_types): Adjust to use std::vector.
(xmethod_worker::do_get_result_type): Adjust to use
gdb::array_view.
* gdbtypes.c (rank_function): Adjust to use gdb::array_view.
* gdbtypes.h: Include "common/array-view.h".
(rank_function): Adjust to use gdb::array_view.
* python/py-xmethods.c (python_xmethod_worker::invoke)
(python_xmethod_worker::do_get_arg_types)
(python_xmethod_worker::do_get_result_type)
(python_xmethod_worker::invoke): Adjust to new interfaces.
* valarith.c (value_user_defined_cpp_op, value_user_defined_op)
(value_x_binop, value_x_unop): Adjust to use gdb::array_view.
* valops.c (find_overload_match, find_oload_champ_namespace)
(find_oload_champ_namespace_loop, find_oload_champ): Adjust to use
gdb:array_view and the new xmethod_worker interfaces.
* value.c (result_type_of_xmethod, call_xmethod): Adjust to use
gdb::array_view.
* value.h (find_overload_match, result_type_of_xmethod)
(call_xmethod): Adjust to use gdb::array_view.
* unittests/array-view-selftests.c: Add slicing tests.
|
|
This change/patch substitues BLOCK_ENTRY_PC for BLOCK_START in
places where BLOCK_START is used to obtain the address at which
execution should enter the block. Since blocks can now contain
non-contiguous ranges, the BLOCK_START - which is still be the
very lowest address in the block - might not be the same as
BLOCK_ENTRY_PC.
There is a change to infrun.c which is less obvious and less mechanical.
I'm posting it as a separate patch.
gdb/ChangeLog:
* ax-gdb.c (gen_var_ref): Use BLOCK_ENTRY_PC in place of
BLOCK_START.
* blockframe.c (get_pc_function_start): Likewise.
* compile/compile-c-symbols.c (convert_one_symbol): Likewise.
(gcc_symbol_address): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* compile/compile.c (get_expr_block_and_pc): Likewise.
* dwarf2loc.c (dwarf2_find_location_expression): Likewise.
(func_addr_to_tail_call_list): Likewise.
* findvar.c (default_read_var_value): Likewise.
* inline-frame.c (inline_frame_this_id): Likewise.
(skip-inline_frames): Likewise.
* infcmd.c (until_next_command): Likewise.
* linespec.c (convert_linespec_to_sals): Likewise.
* parse.c (parse_exp_in_context_1): Likewise.
* printcmd.c (build_address_symbolic): likewise.
(info_address_command): Likewise.
symtab.c (find_function_start_sal): Likewise.
(skip_prologue_sal): Likewise.
(find_function_alias_target): Likewise.
(find_gnu_ifunc): Likewise.
* stack.c (find_frame_funname): Likewise.
* symtab.c (fixup_symbol_section): Likewise.
(find_function_start_sal): Likewise.
(skip_prologue_sal): Likewsie.
(find_function_alias_target): Likewise.
(find_gnu_ifunc): Likewise.
* tracepoint.c (info_scope_command): Likewise.
* value.c (value_fn_field): Likewise.
|
|
This removes dead code that, according to the comments, existed to
placate lint. I don't think this has been relevant in a long time,
and certainly not since gdb switched to C++.
Tested by rebuilding.
ChangeLog
2018-07-30 Tom Tromey <tom@tromey.com>
* cli/cli-decode.c (lookup_cmd): Remove lint code.
* value.c (unpack_long): Remove lint code.
* valops.c (value_ind): Remove lint code.
* valarith.c (value_x_binop, value_x_unop, value_equal)
(value_pos): Remove lint code.
|
|
This removes an unused declaration from value_fetch_lazy_bitfield.
Because it is not completely clear if the check_typedef call is needed
somewhere beneath this function, this is broken out into a separate
patch.
gdb/ChangeLog
2018-07-22 Tom Tromey <tom@tromey.com>
* value.c (value_fetch_lazy_bitfield): Remove unused variable.
|
|
The recent C++ification of target_ops replaced references to the old
"current_target" squashed target throughout with references to a
"target_stack" pointer. I had picked the "target_stack" name very
early in the multi-target work, and managed to stick with it, even
though it's a bit of a misnomer, since it isn't really a "target
stack" object, but a pointer into the current top target in the stack.
As I'm splitting more pieces off of the multi-target branch, I've come
to think that it's better to rename it now. A following patch will
introduce a new class to represent a target stack, and "target_stack"
would be _its_ ideal name. (In the branch, the class is called
a_target_stack to work around the clash.)
Thus this commit renames target_stack to current_top_target and
replaces all references throughout. Also, while at it,
current_top_target is made a function instead of a pointer, to make it
possible to change its internal implementation without leaking
implementation details out. In a couple patches, the implementation
of the function will change to refer to a target stack object, and
then further down the multi-target work, it'll change again to find
the right target stack for the current inferior.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (target_stack): Delete.
(current_top_target): Declare function.
* target.c (target_stack): Delete.
(g_current_top_target): New.
(current_top_target): New function.
* auxv.c: Use current_top_target instead of target_stack
throughout.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* corefile.c: Likewise.
* elfread.c: Likewise.
* eval.c: Likewise.
* exceptions.c: Likewise.
* frame.c: Likewise.
* gdbarch-selftests.c: Likewise.
* gnu-v3-abi.c: Likewise.
* ia64-tdep.c: Likewise.
* ia64-vms-tdep.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* linespec.c: Likewise.
* linux-tdep.c: Likewise.
* minsyms.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-linux-tdep.c: Likewise.
* procfs.c: Likewise.
* regcache.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-tdep.c: Likewise.
* solib-aix.c: Likewise.
* solib-darwin.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* solib-target.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* spu-tdep.c: Likewise.
* symfile.c: Likewise.
* symtab.c: Likewise.
* target-descriptions.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* target.h: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* windows-tdep.c: Likewise.
* mi/mi-main.c: Likewise.
|
|
While reading value_fetch_lazy, I thought it would be good to split it
in small functions (especially the part that handles lval_register).
gdb/ChangeLog:
* value.c (value_fetch_lazy_bitfield): New.
(value_fetch_lazy_memory): New.
(value_fetch_lazy_register): New.
(value_fetch_lazy): Factor out to smaller functions.
|
|
My recent change to allocate values with "new" may have introduced a
small bug. In particular, the previous code allocated with XCNEW, but
the new code only clears a part of the "location" field in the
constructor. I didn't try very hard to actually trigger a bug here,
the problem remains theoretical.
This patch just arranges to initialize the entire location.
Regression tested by the buildbot.
2018-05-25 Tom Tromey <tom@tromey.com>
* value.c (value::location): Initialize.
|
|
Obvious patch to remove unused local variables (found by adding
-Wunused). I didn't touch this one in value_fetch_lazy, because
check_typedef could have a desired side-effect.
3743 struct type *type = check_typedef (value_type (val));
gdb/ChangeLog:
* value.c (release_value): Remove unused variable.
(record_latest_value): Likewise.
(access_value_history): Likewise.
(preserve_values): Likewise.
|
|
I.e., use C++ virtual methods and inheritance instead of tables of
function pointers.
Unfortunately, there's no way to do a smooth transition. ALL native
targets in the tree must be converted at the same time. I've tested
all I could with cross compilers and with help from GCC compile farm,
but naturally I haven't been able to test many of the ports. Still, I
made a best effort to port everything over, and while I expect some
build problems due to typos and such, which should be trivial to fix,
I don't expect any design problems.
* Implementation notes:
- The flattened current_target is gone. References to current_target
or current_target.beneath are replaced with references to
target_stack (the top of the stack) directly.
- To keep "set debug target" working, this adds a new debug_stratum
layer that sits on top of the stack, prints the debug, and delegates
to the target beneath.
In addition, this makes the shortname and longname properties of
target_ops be virtual methods instead of data fields, and makes the
debug target defer those to the target beneath. This is so that
debug code sprinkled around that does "if (debugtarget) ..." can
transparently print the name of the target beneath.
A patch later in the series actually splits out the
shortname/longname methods to a separate structure, but I preferred
to keep that chance separate as it is associated with changing a bit
the design of how targets are registered and open.
- Since you can't check whether a C++ virtual method is overridden,
the old method of checking whether a target_ops implements a method
by comparing the function pointer must be replaced with something
else.
Some cases are fixed by adding a parallel "can_do_foo" target_ops
methods. E.g.,:
+ for (t = target_stack; t != NULL; t = t->beneath)
{
- if (t->to_create_inferior != NULL)
+ if (t->can_create_inferior ())
break;
}
Others are fixed by changing void return type to bool or int return
type, and have the default implementation return false or -1, to
indicate lack of support.
- make-target-delegates was adjusted to generate C++ classes and
methods.
It needed tweaks to grok "virtual" in front of the target method
name, and for the fact that methods are no longer function pointers.
(In particular, the current code parsing the return type was simple
because it could simply parse up until the '(' in '(*to_foo)'.
It now generates a couple C++ classes that inherit target_ops:
dummy_target and debug_target.
Since we need to generate the class declarations as well, i.e., we
need to emit methods twice, we now generate the code in two passes.
- The core_target global is renamed to avoid conflict with the
"core_target" class.
- ctf/tfile targets
init_tracefile_ops is replaced by a base class that is inherited by
both ctf and tfile.
- bsd-uthread
The bsd_uthread_ops_hack hack is gone. It's not needed because
nothing was extending a target created by bsd_uthread_target.
- remote/extended-remote targets
This is a first pass, just enough to C++ify target_ops.
A later pass will convert more free functions to methods, and make
remote_state be truly per remote instance, allowing multiple
simultaneous instances of remote targets.
- inf-child/"native" is converted to an actual base class
(inf_child_target), that is inherited by all native targets.
- GNU/Linux
The old weird double-target linux_ops mechanism in linux-nat.c, is
gone, replaced by adding a few virtual methods to linux-nat.h's
target_ops, called low_XXX, that the concrete linux-nat
implementations override. Sort of like gdbserver's
linux_target_ops, but simpler, for requiring only one
target_ops-like hierarchy, which spares implementing the same method
twice when we need to forward the method to a low implementation.
The low target simply reimplements the target_ops method directly in
that case.
There are a few remaining linux-nat.c hooks that would be better
converted to low_ methods like above too. E.g.:
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
linux_nat_set_forget_process
That'll be done in a follow up patch.
- We can no longer use functions like x86_use_watchpoints to install
custom methods on an arbitrary base target.
The patch replaces instances of such a pattern with template mixins.
For example memory_breakpoint_target defined in target.h, or
x86_nat_target in x86-nat.h.
- linux_trad_target, MIPS and Alpha GNU/Linux
The code in the new linux-nat-trad.h/c files which was split off of
inf-ptrace.h/c recently, is converted to a C++ base class, and used
by the MIPS and Alpha GNU/Linux ports.
- BSD targets
The
$architecture x NetBSD/OpenBSD/FreeBSD
support matrix complicates things a bit. There's common BSD target
code, and there's common architecture-specific code shared between
the different BSDs. Currently, all that is stiched together to form
a final target, via the i386bsd_target, x86bsd_target,
fbsd_nat_add_target functions etc.
This introduces new fbsd_nat_target, obsd_nat_target and
nbsd_nat_target classes that serve as base/prototype target for the
corresponding BSD variant.
And introduces generic i386/AMD64 BSD targets, to be used as
template mixin to build a final target. Similarly, a generic SPARC
target is added, used by both BSD and Linux ports.
- bsd_kvm_add_target, BSD libkvm target
I considered making bsd_kvm_supply_pcb a virtual method, and then
have each port inherit bsd_kvm_target and override that method, but
that was resulting in lots of unjustified churn, so I left the
function pointer mechanism alone.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@freebsd.org>
* target.h (enum strata) <debug_stratum>: New.
(struct target_ops) <all delegation methods>: Replace by C++
virtual methods, and drop "to_" prefix. All references updated
throughout.
<to_shortname, to_longname, to_doc, to_data,
to_have_steppable_watchpoint, to_have_continuable_watchpoint,
to_has_thread_control, to_attach_no_wait>: Delete, replaced by
virtual methods. All references updated throughout.
<can_attach, supports_terminal_ours, can_create_inferior,
get_thread_control_capabilities, attach_no_wait>: New
virtual methods.
<insert_breakpoint, remove_breakpoint>: Now
TARGET_DEFAULT_NORETURN methods.
<info_proc>: Now returns bool.
<to_magic>: Delete.
(OPS_MAGIC): Delete.
(current_target): Delete. All references replaced by references
to ...
(target_stack): ... this. New.
(target_shortname, target_longname): Adjust.
(target_can_run): Now a function declaration.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(memory_breakpoint_target): New template class.
(test_target_ops): Refactor as a C++ class with virtual methods.
* make-target-delegates (NAME_PART): Tighten.
(POINTER_PART, CP_SYMBOL): New.
(SIMPLE_RETURN_PART): Reimplement.
(VEC_RETURN_PART): Expect less.
(RETURN_PART, VIRTUAL_PART): New.
(METHOD): Adjust to C++ virtual methods.
(scan_target_h): Remove reference to C99.
(dname): Output "target_ops::" prefix.
(write_function_header): Adjust to output a C++ class method.
(write_declaration): New.
(write_delegator): Adjust to output a C++ class method.
(tdname): Output "dummy_target::" prefix.
(write_tdefault, write_debugmethod): Adjust to output a C++ class
method.
(tdefault_names, debug_names): Delete.
(return_types, tdefaults, styles, argtypes_array): New.
(top level): All methods are delegators.
(print_class): New.
(top level): Print dummy_target and debug_target classes.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_info_proc_what)
(target_debug_print_thread_control_capabilities)
(target_debug_print_thread_info_p): New.
* target.c (dummy_target): Delete.
(the_dummy_target, the_debug_target): New.
(target_stack): Now extern.
(set_targetdebug): Push/unpush debug target.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(add_target_with_completer): No longer call
complete_target_initialization.
(target_supports_terminal_ours): Use regular delegation.
(update_current_target): Delete.
(push_target): No longer check magic number. Don't call
update_current_target.
(unpush_target): Don't call update_current_target.
(target_is_pushed): No longer check magic number.
(target_require_runnable): Skip for all stratums over
process_stratum.
(target_ops::info_proc): New.
(target_info_proc): Use find_target_at and
find_default_run_target.
(target_supports_disable_randomization): Use regular delegation.
(target_get_osdata): Use find_target_at.
(target_ops::open, target_ops::close, target_ops::can_attach)
(target_ops::attach, target_ops::can_create_inferior)
(target_ops::create_inferior, target_ops::can_run)
(target_can_run): New.
(default_fileio_target): Use regular delegation.
(target_ops::fileio_open, target_ops::fileio_pwrite)
(target_ops::fileio_pread, target_ops::fileio_fstat)
(target_ops::fileio_close, target_ops::fileio_unlink)
(target_ops::fileio_readlink): New.
(target_fileio_open_1, target_fileio_unlink)
(target_fileio_readlink): Always call the target method. Handle
FILEIO_ENOSYS.
(return_zero, return_zero_has_execution): Delete.
(init_dummy_target): Delete.
(dummy_target::dummy_target, dummy_target::shortname)
(dummy_target::longname, dummy_target::doc)
(debug_target::debug_target, debug_target::shortname)
(debug_target::longname, debug_target::doc): New.
(target_supports_delete_record): Use regular delegation.
(setup_target_debug): Delete.
(maintenance_print_target_stack): Skip debug_stratum.
(initialize_targets): Instantiate the_dummy_target and
the_debug_target.
* auxv.c (target_auxv_parse): Remove 'ops' parameter. Adjust to
use target_stack.
(target_auxv_search, fprint_target_auxv): Adjust.
(info_auxv_command): Adjust to use target_stack.
* auxv.h (target_auxv_parse): Remove 'ops' parameter.
* exceptions.c (print_flush): Handle a NULL target_stack.
* regcache.c (target_ops_no_register): Refactor as class with
virtual methods.
* exec.c (exec_target): New class.
(exec_ops): Now an exec_target.
(exec_open, exec_close_1, exec_get_section_table)
(exec_xfer_partial, exec_files_info, exec_has_memory)
(exec_make_note_section): Refactor as exec_target methods.
(exec_file_clear, ignore, exec_remove_breakpoint, init_exec_ops):
Delete.
(exec_target::find_memory_regions): New.
(_initialize_exec): Don't call init_exec_ops.
* gdbcore.h (exec_file_clear): Delete.
* corefile.c (core_target): Delete.
(core_file_command): Adjust.
* corelow.c (core_target): New class.
(the_core_target): New.
(core_close): Remove target_ops parameter.
(core_close_cleanup): Adjust.
(core_target::close): New.
(core_open, core_detach, get_core_registers, core_files_info)
(core_xfer_partial, core_thread_alive, core_read_description)
(core_pid_to_str, core_thread_name, core_has_memory)
(core_has_stack, core_has_registers, core_info_proc): Rework as
core_target methods.
(ignore, core_remove_breakpoint, init_core_ops): Delete.
(_initialize_corelow): Initialize the_core_target.
* gdbcore.h (core_target): Delete.
(the_core_target): New.
* ctf.c: (ctf_target): New class.
(ctf_ops): Now a ctf_target.
(ctf_open, ctf_close, ctf_files_info, ctf_fetch_registers)
(ctf_xfer_partial, ctf_get_trace_state_variable_value)
(ctf_trace_find, ctf_traceframe_info): Refactor as ctf_target
methods.
(init_ctf_ops): Delete.
(_initialize_ctf): Don't call it.
* tracefile-tfile.c (tfile_target): New class.
(tfile_ops): Now a tfile_target.
(tfile_open, tfile_close, tfile_files_info)
(tfile_get_tracepoint_status, tfile_trace_find)
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value, tfile_traceframe_info):
Refactor as tfile_target methods.
(tfile_xfer_partial_features): Remove target_ops parameter.
(init_tfile_ops): Delete.
(_initialize_tracefile_tfile): Don't call it.
* tracefile.c (tracefile_has_all_memory, tracefile_has_memory)
(tracefile_has_stack, tracefile_has_registers)
(tracefile_thread_alive, tracefile_get_trace_status): Refactor as
tracefile_target methods.
(init_tracefile_ops): Delete.
(tracefile_target::tracefile_target): New.
* tracefile.h: Include "target.h".
(tracefile_target): New class.
(init_tracefile_ops): Delete.
* spu-multiarch.c (spu_multiarch_target): New class.
(spu_ops): Now a spu_multiarch_target.
(spu_thread_architecture, spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Refactor as
spu_multiarch_target methods.
(init_spu_ops): Delete.
(_initialize_spu_multiarch): Remove references to init_spu_ops,
complete_target_initialization.
* ravenscar-thread.c (ravenscar_thread_target): New class.
(ravenscar_ops): Now a ravenscar_thread_target.
(ravenscar_resume, ravenscar_wait, ravenscar_update_thread_list)
(ravenscar_thread_alive, ravenscar_pid_to_str)
(ravenscar_fetch_registers, ravenscar_store_registers)
(ravenscar_prepare_to_store, ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint)
(ravenscar_stopped_by_watchpoint, ravenscar_stopped_data_address)
(ravenscar_mourn_inferior, ravenscar_core_of_thread)
(ravenscar_get_ada_task_ptid): Refactor as ravenscar_thread_target
methods.
(init_ravenscar_thread_ops): Delete.
(_initialize_ravenscar): Remove references to
init_ravenscar_thread_ops and complete_target_initialization.
* bsd-uthread.c (bsd_uthread_ops_hack): Delete.
(bsd_uthread_target): New class.
(bsd_uthread_ops): Now a bsd_uthread_target.
(bsd_uthread_activate): Adjust to refer to bsd_uthread_ops.
(bsd_uthread_close, bsd_uthread_mourn_inferior)
(bsd_uthread_fetch_registers, bsd_uthread_store_registers)
(bsd_uthread_wait, bsd_uthread_resume, bsd_uthread_thread_alive)
(bsd_uthread_update_thread_list, bsd_uthread_extra_thread_info)
(bsd_uthread_pid_to_str): Refactor as bsd_uthread_target methods.
(bsd_uthread_target): Delete function.
(_initialize_bsd_uthread): Remove reference to
complete_target_initialization.
* bfd-target.c (target_bfd_data): Delete. Fields folded into ...
(target_bfd): ... this new class.
(target_bfd_xfer_partial, target_bfd_get_section_table)
(target_bfd_close): Refactor as target_bfd methods.
(target_bfd::~target_bfd): New.
(target_bfd_reopen): Adjust.
(target_bfd::close): New.
* record-btrace.c (record_btrace_target): New class.
(record_btrace_ops): Now a record_btrace_target.
(record_btrace_open, record_btrace_stop_recording)
(record_btrace_disconnect, record_btrace_close)
(record_btrace_async, record_btrace_info)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from, record_btrace_call_history)
(record_btrace_call_history_range)
(record_btrace_call_history_from, record_btrace_record_method)
(record_btrace_is_replaying, record_btrace_will_replay)
(record_btrace_xfer_partial, record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store)
(record_btrace_to_get_unwinder)
(record_btrace_to_get_tailcall_unwinder, record_btrace_resume)
(record_btrace_commit_resume, record_btrace_wait)
(record_btrace_stop, record_btrace_can_execute_reverse)
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint)
(record_btrace_update_thread_list, record_btrace_thread_alive)
(record_btrace_goto_begin, record_btrace_goto_end)
(record_btrace_goto, record_btrace_stop_replaying_all)
(record_btrace_execution_direction)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): Refactor as
record_btrace_target methods.
(init_record_btrace_ops): Delete.
(_initialize_record_btrace): Remove reference to
init_record_btrace_ops.
* record-full.c (RECORD_FULL_IS_REPLAY): Adjust to always refer to
the execution_direction global.
(record_full_base_target, record_full_target)
(record_full_core_target): New classes.
(record_full_ops): Now a record_full_target.
(record_full_core_ops): Now a record_full_core_target.
(record_full_target::detach, record_full_target::disconnect)
(record_full_core_target::disconnect)
(record_full_target::mourn_inferior, record_full_target::kill):
New.
(record_full_open, record_full_close, record_full_async): Refactor
as methods of the record_full_base_target class.
(record_full_resume, record_full_commit_resume): Refactor
as methods of the record_full_target class.
(record_full_wait, record_full_stopped_by_watchpoint)
(record_full_stopped_data_address)
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): Refactor as
methods of the record_full_base_target class.
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint):
Refactor as methods of the record_full_target class.
(record_full_can_execute_reverse, record_full_get_bookmark)
(record_full_goto_bookmark, record_full_execution_direction)
(record_full_record_method, record_full_info, record_full_delete)
(record_full_is_replaying, record_full_will_replay)
(record_full_goto_begin, record_full_goto_end, record_full_goto)
(record_full_stop_replaying): Refactor as methods of the
record_full_base_target class.
(record_full_core_resume, record_full_core_kill)
(record_full_core_fetch_registers)
(record_full_core_prepare_to_store)
(record_full_core_store_registers, record_full_core_xfer_partial)
(record_full_core_insert_breakpoint)
(record_full_core_remove_breakpoint)
(record_full_core_has_execution): Refactor
as methods of the record_full_core_target class.
(record_full_base_target::supports_delete_record): New.
(init_record_full_ops): Delete.
(init_record_full_core_ops): Delete.
(record_full_save): Refactor as method of the
record_full_base_target class.
(_initialize_record_full): Remove references to
init_record_full_ops and init_record_full_core_ops.
* remote.c (remote_target, extended_remote_target): New classes.
(remote_ops): Now a remote_target.
(extended_remote_ops): Now an extended_remote_target.
(remote_insert_fork_catchpoint, remote_remove_fork_catchpoint)
(remote_insert_vfork_catchpoint, remote_remove_vfork_catchpoint)
(remote_insert_exec_catchpoint, remote_remove_exec_catchpoint)
(remote_pass_signals, remote_set_syscall_catchpoint)
(remote_program_signals, )
(remote_thread_always_alive): Remove target_ops parameter.
(remote_thread_alive, remote_thread_name)
(remote_update_thread_list, remote_threads_extra_info)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(remote_get_ada_task_ptid, remote_close, remote_start_remote)
(remote_open): Refactor as methods of remote_target.
(extended_remote_open, extended_remote_detach)
(extended_remote_attach, extended_remote_post_attach):
(extended_remote_supports_disable_randomization)
(extended_remote_create_inferior): : Refactor as method of
extended_remote_target.
(remote_set_permissions, remote_open_1, remote_detach)
(remote_follow_fork, remote_follow_exec, remote_disconnect)
(remote_resume, remote_commit_resume, remote_stop)
(remote_interrupt, remote_pass_ctrlc, remote_terminal_inferior)
(remote_terminal_ours, remote_wait, remote_fetch_registers)
(remote_prepare_to_store, remote_store_registers)
(remote_flash_erase, remote_flash_done, remote_files_info)
(remote_kill, remote_mourn, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_watchpoint_addr_within_range)
(remote_remove_watchpoint, remote_region_ok_for_hw_watchpoint)
(remote_check_watch_resources, remote_stopped_by_sw_breakpoint)
(remote_supports_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint)
(remote_supports_stopped_by_hw_breakpoint)
(remote_stopped_by_watchpoint, remote_stopped_data_address)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory): Refactor as methods of remote_target.
(remote_write_qxfer, remote_read_qxfer): Remove target_ops
parameter.
(remote_xfer_partial, remote_get_memory_xfer_limit)
(remote_search_memory, remote_rcmd, remote_memory_map)
(remote_pid_to_str, remote_get_thread_local_address)
(remote_get_tib_address, remote_read_description): Refactor as
methods of remote_target.
(remote_target::fileio_open, remote_target::fileio_pwrite)
(remote_target::fileio_pread, remote_target::fileio_close): New.
(remote_hostio_readlink, remote_hostio_fstat)
(remote_filesystem_is_local, remote_can_execute_reverse)
(remote_supports_non_stop, remote_supports_disable_randomization)
(remote_supports_multi_process, remote_supports_cond_breakpoints)
(remote_supports_enable_disable_tracepoint)
(remote_supports_string_tracing)
(remote_can_run_breakpoint_commands, remote_trace_init)
(remote_download_tracepoint, remote_can_download_tracepoint)
(remote_download_trace_state_variable, remote_enable_tracepoint)
(remote_disable_tracepoint, remote_trace_set_readonly_regions)
(remote_trace_start, remote_get_trace_status)
(remote_get_tracepoint_status, remote_trace_stop)
(remote_trace_find, remote_get_trace_state_variable_value)
(remote_save_trace_data, remote_get_raw_trace_data)
(remote_set_disconnected_tracing, remote_core_of_thread)
(remote_set_circular_trace_buffer, remote_traceframe_info)
(remote_get_min_fast_tracepoint_insn_len)
(remote_set_trace_buffer_size, remote_set_trace_notes)
(remote_use_agent, remote_can_use_agent, remote_enable_btrace)
(remote_disable_btrace, remote_teardown_btrace)
(remote_read_btrace, remote_btrace_conf)
(remote_augmented_libraries_svr4_read, remote_load)
(remote_pid_to_exec_file, remote_can_do_single_step)
(remote_execution_direction, remote_thread_handle_to_thread_info):
Refactor as methods of remote_target.
(init_remote_ops, init_extended_remote_ops): Delete.
(remote_can_async_p, remote_is_async_p, remote_async)
(remote_thread_events, remote_upload_tracepoints)
(remote_upload_trace_state_variables): Refactor as methods of
remote_target.
(_initialize_remote): Remove references to init_remote_ops and
init_extended_remote_ops.
* remote-sim.c (gdbsim_target): New class.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_kill)
(gdbsim_load, gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume, gdbsim_interrupt)
(gdbsim_wait, gdbsim_prepare_to_store, gdbsim_xfer_partial)
(gdbsim_files_info, gdbsim_mourn_inferior, gdbsim_thread_alive)
(gdbsim_pid_to_str, gdbsim_has_all_memory, gdbsim_has_memory):
Refactor as methods of gdbsim_target.
(gdbsim_ops): Now a gdbsim_target.
(init_gdbsim_ops): Delete.
(gdbsim_cntrl_c): Adjust.
(_initialize_remote_sim): Remove reference to init_gdbsim_ops.
* amd64-linux-nat.c (amd64_linux_nat_target): New class.
(the_amd64_linux_nat_target): New.
(amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Refactor as methods of
amd64_linux_nat_target.
(_initialize_amd64_linux_nat): Adjust. Set linux_target.
* i386-linux-nat.c: Don't include "linux-nat.h".
(i386_linux_nat_target): New class.
(the_i386_linux_nat_target): New.
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers, i386_linux_resume): Refactor
as methods of i386_linux_nat_target.
(_initialize_i386_linux_nat): Adjust. Set linux_target.
* inf-child.c (inf_child_ops): Delete.
(inf_child_fetch_inferior_registers)
(inf_child_store_inferior_registers): Delete.
(inf_child_post_attach, inf_child_prepare_to_store): Refactor as
methods of inf_child_target.
(inf_child_target::supports_terminal_ours)
(inf_child_target::terminal_init)
(inf_child_target::terminal_inferior)
(inf_child_target::terminal_ours_for_output)
(inf_child_target::terminal_ours, inf_child_target::interrupt)
(inf_child_target::pass_ctrlc, inf_child_target::terminal_info):
New.
(inf_child_open, inf_child_disconnect, inf_child_close)
(inf_child_mourn_inferior, inf_child_maybe_unpush_target)
(inf_child_post_startup_inferior, inf_child_can_run)
(inf_child_pid_to_exec_file): Refactor as methods of
inf_child_target.
(inf_child_follow_fork): Delete.
(inf_child_target::can_create_inferior)
(inf_child_target::can_attach): New.
(inf_child_target::has_all_memory, inf_child_target::has_memory)
(inf_child_target::has_stack, inf_child_target::has_registers)
(inf_child_target::has_execution): New.
(inf_child_fileio_open, inf_child_fileio_pwrite)
(inf_child_fileio_pread, inf_child_fileio_fstat)
(inf_child_fileio_close, inf_child_fileio_unlink)
(inf_child_fileio_readlink, inf_child_use_agent)
(inf_child_can_use_agent): Refactor as methods of
inf_child_target.
(return_zero, inf_child_target): Delete.
(inf_child_target::inf_child_target): New.
* inf-child.h: Include "target.h".
(inf_child_target): Delete function prototype.
(inf_child_target): New class.
(inf_child_open_target, inf_child_mourn_inferior)
(inf_child_maybe_unpush_target): Delete.
* inf-ptrace.c (inf_ptrace_target::~inf_ptrace_target): New.
(inf_ptrace_follow_fork, inf_ptrace_insert_fork_catchpoint)
(inf_ptrace_remove_fork_catchpoint, inf_ptrace_create_inferior)
(inf_ptrace_post_startup_inferior, inf_ptrace_mourn_inferior)
(inf_ptrace_attach, inf_ptrace_post_attach, inf_ptrace_detach)
(inf_ptrace_detach_success, inf_ptrace_kill, inf_ptrace_resume)
(inf_ptrace_wait, inf_ptrace_xfer_partial)
(inf_ptrace_thread_alive, inf_ptrace_files_info)
(inf_ptrace_pid_to_str, inf_ptrace_auxv_parse): Refactor as
methods of inf_ptrace_target.
(inf_ptrace_target): Delete function.
* inf-ptrace.h: Include "inf-child.h".
(inf_ptrace_target): Delete function declaration.
(inf_ptrace_target): New class.
(inf_ptrace_trad_target, inf_ptrace_detach_success): Delete.
* linux-nat.c (linux_target): New.
(linux_ops, linux_ops_saved, super_xfer_partial): Delete.
(linux_nat_target::~linux_nat_target): New.
(linux_child_post_attach, linux_child_post_startup_inferior)
(linux_child_follow_fork, linux_child_insert_fork_catchpoint)
(linux_child_remove_fork_catchpoint)
(linux_child_insert_vfork_catchpoint)
(linux_child_remove_vfork_catchpoint)
(linux_child_insert_exec_catchpoint)
(linux_child_remove_exec_catchpoint)
(linux_child_set_syscall_catchpoint, linux_nat_pass_signals)
(linux_nat_create_inferior, linux_nat_attach, linux_nat_detach)
(linux_nat_resume, linux_nat_stopped_by_watchpoint)
(linux_nat_stopped_data_address)
(linux_nat_stopped_by_sw_breakpoint)
(linux_nat_supports_stopped_by_sw_breakpoint)
(linux_nat_stopped_by_hw_breakpoint)
(linux_nat_supports_stopped_by_hw_breakpoint, linux_nat_wait)
(linux_nat_kill, linux_nat_mourn_inferior)
(linux_nat_xfer_partial, linux_nat_thread_alive)
(linux_nat_update_thread_list, linux_nat_pid_to_str)
(linux_nat_thread_name, linux_child_pid_to_exec_file)
(linux_child_static_tracepoint_markers_by_strid)
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_supports_non_stop, linux_nat_always_non_stop_p)
(linux_nat_supports_multi_process)
(linux_nat_supports_disable_randomization, linux_nat_async)
(linux_nat_stop, linux_nat_close, linux_nat_thread_address_space)
(linux_nat_core_of_thread, linux_nat_filesystem_is_local)
(linux_nat_fileio_open, linux_nat_fileio_readlink)
(linux_nat_fileio_unlink, linux_nat_thread_events): Refactor as
methods of linux_nat_target.
(linux_nat_wait_1, linux_xfer_siginfo, linux_proc_xfer_partial)
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Remove target_ops
parameter.
(check_stopped_by_watchpoint): Adjust.
(linux_xfer_partial): Delete.
(linux_target_install_ops, linux_target, linux_nat_add_target):
Delete.
(linux_nat_target::linux_nat_target): New.
* linux-nat.h: Include "inf-ptrace.h".
(linux_nat_target): New.
(linux_target, linux_target_install_ops, linux_nat_add_target):
Delete function declarations.
(linux_target): Declare global.
* linux-thread-db.c (thread_db_target): New.
(thread_db_target::thread_db_target): New.
(thread_db_ops): Delete.
(the_thread_db_target): New.
(thread_db_detach, thread_db_wait, thread_db_mourn_inferior)
(thread_db_update_thread_list, thread_db_pid_to_str)
(thread_db_extra_thread_info)
(thread_db_thread_handle_to_thread_info)
(thread_db_get_thread_local_address, thread_db_get_ada_task_ptid)
(thread_db_resume): Refactor as methods of thread_db_target.
(init_thread_db_ops): Delete.
(_initialize_thread_db): Remove reference to init_thread_db_ops.
* x86-linux-nat.c: Don't include "linux-nat.h".
(super_post_startup_inferior): Delete.
(x86_linux_nat_target::~x86_linux_nat_target): New.
(x86_linux_child_post_startup_inferior)
(x86_linux_read_description, x86_linux_enable_btrace)
(x86_linux_disable_btrace, x86_linux_teardown_btrace)
(x86_linux_read_btrace, x86_linux_btrace_conf): Refactor as
methods of x86_linux_nat_target.
(x86_linux_create_target): Delete. Bits folded ...
(x86_linux_add_target): ... here. Now takes a linux_nat_target
pointer.
* x86-linux-nat.h: Include "linux-nat.h" and "x86-nat.h".
(x86_linux_nat_target): New class.
(x86_linux_create_target): Delete.
(x86_linux_add_target): Now takes a linux_nat_target pointer.
* x86-nat.c (x86_insert_watchpoint, x86_remove_watchpoint)
(x86_region_ok_for_watchpoint, x86_stopped_data_address)
(x86_stopped_by_watchpoint, x86_insert_hw_breakpoint)
(x86_remove_hw_breakpoint, x86_can_use_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): Remove target_ops parameter and
make extern.
(x86_use_watchpoints): Delete.
* x86-nat.h: Include "breakpoint.h" and "target.h".
(x86_use_watchpoints): Delete.
(x86_can_use_hw_breakpoint, x86_region_ok_for_hw_watchpoint)
(x86_stopped_by_watchpoint, x86_stopped_data_address)
(x86_insert_watchpoint, x86_remove_watchpoint)
(x86_insert_hw_breakpoint, x86_remove_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): New declarations.
(x86_nat_target): New template class.
* ppc-linux-nat.c (ppc_linux_nat_target): New class.
(the_ppc_linux_nat_target): New.
(ppc_linux_fetch_inferior_registers)
(ppc_linux_can_use_hw_breakpoint)
(ppc_linux_region_ok_for_hw_watchpoint)
(ppc_linux_ranged_break_num_registers)
(ppc_linux_insert_hw_breakpoint, ppc_linux_remove_hw_breakpoint)
(ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_can_accel_watchpoint_condition)
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint)
(ppc_linux_stopped_data_address, ppc_linux_stopped_by_watchpoint)
(ppc_linux_watchpoint_addr_within_range)
(ppc_linux_masked_watch_num_registers)
(ppc_linux_store_inferior_registers, ppc_linux_auxv_parse)
(ppc_linux_read_description): Refactor as methods of
ppc_linux_nat_target.
(_initialize_ppc_linux_nat): Adjust. Set linux_target.
* procfs.c (procfs_xfer_partial): Delete forward declaration.
(procfs_target): New class.
(the_procfs_target): New.
(procfs_target): Delete function.
(procfs_auxv_parse, procfs_attach, procfs_detach)
(procfs_fetch_registers, procfs_store_registers, procfs_wait)
(procfs_xfer_partial, procfs_resume, procfs_pass_signals)
(procfs_files_info, procfs_kill_inferior, procfs_mourn_inferior)
(procfs_create_inferior, procfs_update_thread_list)
(procfs_thread_alive, procfs_pid_to_str)
(procfs_can_use_hw_breakpoint, procfs_stopped_by_watchpoint)
(procfs_stopped_data_address, procfs_insert_watchpoint)
(procfs_remove_watchpoint, procfs_region_ok_for_hw_watchpoint)
(proc_find_memory_regions, procfs_info_proc)
(procfs_make_note_section): Refactor as methods of procfs_target.
(_initialize_procfs): Adjust.
* sol-thread.c (sol_thread_target): New class.
(sol_thread_ops): Now a sol_thread_target.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers)
(sol_thread_xfer_partial, sol_thread_mourn_inferior)
(sol_thread_alive, solaris_pid_to_str, sol_update_thread_list)
(sol_get_ada_task_ptid): Refactor as methods of sol_thread_target.
(init_sol_thread_ops): Delete.
(_initialize_sol_thread): Adjust. Remove references to
init_sol_thread_ops and complete_target_initialization.
* windows-nat.c (windows_nat_target): New class.
(windows_fetch_inferior_registers)
(windows_store_inferior_registers, windows_resume, windows_wait)
(windows_attach, windows_detach, windows_pid_to_exec_file)
(windows_files_info, windows_create_inferior)
(windows_mourn_inferior, windows_interrupt, windows_kill_inferior)
(windows_close, windows_pid_to_str, windows_xfer_partial)
(windows_get_tib_address, windows_get_ada_task_ptid)
(windows_thread_name, windows_thread_alive): Refactor as
windows_nat_target methods.
(do_initial_windows_stuff): Adjust.
(windows_target): Delete function.
(_initialize_windows_nat): Adjust.
* darwin-nat.c (darwin_resume, darwin_wait_to, darwin_interrupt)
(darwin_mourn_inferior, darwin_kill_inferior)
(darwin_create_inferior, darwin_attach, darwin_detach)
(darwin_pid_to_str, darwin_thread_alive, darwin_xfer_partial)
(darwin_pid_to_exec_file, darwin_get_ada_task_ptid)
(darwin_supports_multi_process): Refactor as darwin_nat_target
methods.
(darwin_resume_to, darwin_files_info): Delete.
(_initialize_darwin_inferior): Rename to ...
(_initialize_darwin_nat): ... this. Adjust to C++ification.
* darwin-nat.h: Include "inf-child.h".
(darwin_nat_target): New class.
(darwin_complete_target): Delete.
* i386-darwin-nat.c (i386_darwin_nat_target): New class.
(darwin_target): New.
(i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Refactor as methods of
darwin_nat_target.
(darwin_complete_target): Delete, with ...
(_initialize_i386_darwin_nat): ... bits factored out here.
* alpha-linux-nat.c (alpha_linux_nat_target): New class.
(the_alpha_linux_nat_target): New.
(alpha_linux_register_u_offset): Refactor as
alpha_linux_nat_target method.
(_initialize_alpha_linux_nat): Adjust.
* linux-nat-trad.c (inf_ptrace_register_u_offset): Delete.
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers): Refact as
methods of linux_nat_trad_target.
(linux_trad_target): Delete.
* linux-nat-trad.h (linux_trad_target): Delete function.
(linux_nat_trad_target): New class.
* mips-linux-nat.c (mips_linux_nat_target): New class.
(super_fetch_registers, super_store_registers, super_close):
Delete.
(the_mips_linux_nat_target): New.
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers)
(mips64_linux_fetch_registers, mips64_linux_store_registers)
(mips_linux_register_u_offset, mips_linux_read_description)
(mips_linux_can_use_hw_breakpoint)
(mips_linux_stopped_by_watchpoint)
(mips_linux_stopped_data_address)
(mips_linux_region_ok_for_hw_watchpoint)
(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
(mips_linux_close): Refactor as methods of mips_linux_nat.
(_initialize_mips_linux_nat): Adjust to C++ification.
* aix-thread.c (aix_thread_target): New class.
(aix_thread_ops): Now an aix_thread_target.
(aix_thread_detach, aix_thread_resume, aix_thread_wait)
(aix_thread_fetch_registers, aix_thread_store_registers)
(aix_thread_xfer_partial, aix_thread_mourn_inferior)
(aix_thread_thread_alive, aix_thread_pid_to_str)
(aix_thread_extra_thread_info, aix_thread_get_ada_task_ptid):
Refactor as methods of aix_thread_target.
(init_aix_thread_ops): Delete.
(_initialize_aix_thread): Remove references to init_aix_thread_ops
and complete_target_initialization.
* rs6000-nat.c (rs6000_xfer_shared_libraries): Delete.
(rs6000_nat_target): New class.
(the_rs6000_nat_target): New.
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers)
(rs6000_xfer_partial, rs6000_wait, rs6000_create_inferior)
(rs6000_xfer_shared_libraries): Refactor as rs6000_nat_target methods.
(super_create_inferior): Delete.
(_initialize_rs6000_nat): Adjust to C++ification.
* arm-linux-nat.c (arm_linux_nat_target): New class.
(the_arm_linux_nat_target): New.
(arm_linux_fetch_inferior_registers)
(arm_linux_store_inferior_registers, arm_linux_read_description)
(arm_linux_can_use_hw_breakpoint, arm_linux_insert_hw_breakpoint)
(arm_linux_remove_hw_breakpoint)
(arm_linux_region_ok_for_hw_watchpoint)
(arm_linux_insert_watchpoint, arm_linux_remove_watchpoint)
(arm_linux_stopped_data_address, arm_linux_stopped_by_watchpoint)
(arm_linux_watchpoint_addr_within_range): Refactor as methods of
arm_linux_nat_target.
(_initialize_arm_linux_nat): Adjust to C++ification.
* aarch64-linux-nat.c (aarch64_linux_nat_target): New class.
(the_aarch64_linux_nat_target): New.
(aarch64_linux_fetch_inferior_registers)
(aarch64_linux_store_inferior_registers)
(aarch64_linux_child_post_startup_inferior)
(aarch64_linux_read_description)
(aarch64_linux_can_use_hw_breakpoint)
(aarch64_linux_insert_hw_breakpoint)
(aarch64_linux_remove_hw_breakpoint)
(aarch64_linux_insert_watchpoint, aarch64_linux_remove_watchpoint)
(aarch64_linux_region_ok_for_hw_watchpoint)
(aarch64_linux_stopped_data_address)
(aarch64_linux_stopped_by_watchpoint)
(aarch64_linux_watchpoint_addr_within_range)
(aarch64_linux_can_do_single_step): Refactor as methods of
aarch64_linux_nat_target.
(super_post_startup_inferior): Delete.
(_initialize_aarch64_linux_nat): Adjust to C++ification.
* hppa-linux-nat.c (hppa_linux_nat_target): New class.
(the_hppa_linux_nat_target): New.
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Refactor as methods of
hppa_linux_nat_target.
(_initialize_hppa_linux_nat): Adjust to C++ification.
* ia64-linux-nat.c (ia64_linux_nat_target): New class.
(the_ia64_linux_nat_target): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
(ia64_linux_stopped_data_address)
(ia64_linux_stopped_by_watchpoint, ia64_linux_fetch_registers)
(ia64_linux_store_registers, ia64_linux_xfer_partial): Refactor as
ia64_linux_nat_target methods.
(super_xfer_partial): Delete.
(_initialize_ia64_linux_nat): Adjust to C++ification.
* m32r-linux-nat.c (m32r_linux_nat_target): New class.
(the_m32r_linux_nat_target): New.
(m32r_linux_fetch_inferior_registers)
(m32r_linux_store_inferior_registers): Refactor as
m32r_linux_nat_target methods.
(_initialize_m32r_linux_nat): Adjust to C++ification.
* m68k-linux-nat.c (m68k_linux_nat_target): New class.
(the_m68k_linux_nat_target): New.
(m68k_linux_fetch_inferior_registers)
(m68k_linux_store_inferior_registers): Refactor as
m68k_linux_nat_target methods.
(_initialize_m68k_linux_nat): Adjust to C++ification.
* s390-linux-nat.c (s390_linux_nat_target): New class.
(the_s390_linux_nat_target): New.
(s390_linux_fetch_inferior_registers)
(s390_linux_store_inferior_registers, s390_stopped_by_watchpoint)
(s390_insert_watchpoint, s390_remove_watchpoint)
(s390_can_use_hw_breakpoint, s390_insert_hw_breakpoint)
(s390_remove_hw_breakpoint, s390_region_ok_for_hw_watchpoint)
(s390_auxv_parse, s390_read_description): Refactor as methods of
s390_linux_nat_target.
(_initialize_s390_nat): Adjust to C++ification.
* sparc-linux-nat.c (sparc_linux_nat_target): New class.
(the_sparc_linux_nat_target): New.
(_initialize_sparc_linux_nat): Adjust to C++ification.
* sparc-nat.c (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc64-linux-nat.c (sparc64_linux_nat_target): New class.
(the_sparc64_linux_nat_target): New.
(_initialize_sparc64_linux_nat): Adjust to C++ification.
* spu-linux-nat.c (spu_linux_nat_target): New class.
(the_spu_linux_nat_target): New.
(spu_child_post_startup_inferior, spu_child_post_attach)
(spu_child_wait, spu_fetch_inferior_registers)
(spu_store_inferior_registers, spu_xfer_partial)
(spu_can_use_hw_breakpoint): Refactor as spu_linux_nat_target
methods.
(_initialize_spu_nat): Adjust to C++ification.
* tilegx-linux-nat.c (tilegx_linux_nat_target): New class.
(the_tilegx_linux_nat_target): New.
(fetch_inferior_registers, store_inferior_registers):
Refactor as methods.
(_initialize_tile_linux_nat): Adjust to C++ification.
* xtensa-linux-nat.c (xtensa_linux_nat_target): New class.
(the_xtensa_linux_nat_target): New.
(xtensa_linux_fetch_inferior_registers)
(xtensa_linux_store_inferior_registers): Refactor as
xtensa_linux_nat_target methods.
(_initialize_xtensa_linux_nat): Adjust to C++ification.
* fbsd-nat.c (USE_SIGTRAP_SIGINFO): Delete.
(fbsd_pid_to_exec_file, fbsd_find_memory_regions)
(fbsd_find_memory_regions, fbsd_info_proc, fbsd_xfer_partial)
(fbsd_thread_alive, fbsd_pid_to_str, fbsd_thread_name)
(fbsd_update_thread_list, fbsd_resume, fbsd_wait)
(fbsd_stopped_by_sw_breakpoint)
(fbsd_supports_stopped_by_sw_breakpoint, fbsd_follow_fork)
(fbsd_insert_fork_catchpoint, fbsd_remove_fork_catchpoint)
(fbsd_insert_vfork_catchpoint, fbsd_remove_vfork_catchpoint)
(fbsd_post_startup_inferior, fbsd_post_attach)
(fbsd_insert_exec_catchpoint, fbsd_remove_exec_catchpoint)
(fbsd_set_syscall_catchpoint)
(super_xfer_partial, super_resume, super_wait)
(fbsd_supports_stopped_by_hw_breakpoint): Delete.
(fbsd_handle_debug_trap): Remove target_ops parameter.
(fbsd_nat_add_target): Delete.
* fbsd-nat.h: Include "inf-ptrace.h".
(fbsd_nat_add_target): Delete.
(USE_SIGTRAP_SIGINFO): Define.
(fbsd_nat_target): New class.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Remove target_ops parameter.
(amd64bsd_target): Delete.
* amd64-bsd-nat.h: New file.
* amd64-fbsd-nat.c: Include "amd64-bsd-nat.h" instead of
"x86-bsd-nat.h".
(amd64_fbsd_nat_target): New class.
(the_amd64_fbsd_nat_target): New.
(amd64fbsd_read_description): Refactor as method of
amd64_fbsd_nat_target.
(amd64_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_amd64fbsd_nat): Adjust to C++ification.
* amd64-nat.h (amd64bsd_target): Delete function declaration.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Remove target_ops parameter.
(i386bsd_target): Delete.
* i386-bsd-nat.h (i386bsd_target): Delete function declaration.
(i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Declare.
(i386_bsd_nat_target): New class.
* i386-fbsd-nat.c (i386_fbsd_nat_target): New class.
(the_i386_fbsd_nat_target): New.
(i386fbsd_resume, i386fbsd_read_description): Refactor as
i386_fbsd_nat_target methods.
(i386_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_i386fbsd_nat): Adjust to C++ification.
* x86-bsd-nat.c (super_mourn_inferior): Delete.
(x86bsd_mourn_inferior, x86bsd_target): Delete.
(_initialize_x86_bsd_nat): Adjust to C++ification.
* x86-bsd-nat.h: Include "x86-nat.h".
(x86bsd_target): Delete declaration.
(x86bsd_nat_target): New class.
* aarch64-fbsd-nat.c (aarch64_fbsd_nat_target): New class.
(the_aarch64_fbsd_nat_target): New.
(aarch64_fbsd_fetch_inferior_registers)
(aarch64_fbsd_store_inferior_registers): Refactor as methods of
aarch64_fbsd_nat_target.
(_initialize_aarch64_fbsd_nat): Adjust to C++ification.
* alpha-bsd-nat.c (alpha_bsd_nat_target): New class.
(the_alpha_bsd_nat_target): New.
(alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Refactor as
alpha_bsd_nat_target methods.
(_initialize_alphabsd_nat): Refactor as methods of
alpha_bsd_nat_target.
* amd64-nbsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_nbsd_nat_target): New.
(_initialize_amd64nbsd_nat): Adjust to C++ification.
* amd64-obsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_obsd_nat_target): New.
(_initialize_amd64obsd_nat): Adjust to C++ification.
* arm-fbsd-nat.c (arm_fbsd_nat_target): New.
(the_arm_fbsd_nat_target): New.
(arm_fbsd_fetch_inferior_registers)
(arm_fbsd_store_inferior_registers, arm_fbsd_read_description):
(_initialize_arm_fbsd_nat): Refactor as methods of
arm_fbsd_nat_target.
(_initialize_arm_fbsd_nat): Adjust to C++ification.
* arm-nbsd-nat.c (arm_netbsd_nat_target): New class.
(the_arm_netbsd_nat_target): New.
(armnbsd_fetch_registers, armnbsd_store_registers): Refactor as
arm_netbsd_nat_target.
(_initialize_arm_netbsd_nat): Adjust to C++ification.
* hppa-nbsd-nat.c (hppa_nbsd_nat_target): New class.
(the_hppa_nbsd_nat_target): New.
(hppanbsd_fetch_registers, hppanbsd_store_registers): Refactor as
hppa_nbsd_nat_target methods.
(_initialize_hppanbsd_nat): Adjust to C++ification.
* hppa-obsd-nat.c (hppa_obsd_nat_target): New class.
(the_hppa_obsd_nat_target): New.
(hppaobsd_fetch_registers, hppaobsd_store_registers): Refactor as
methods of hppa_obsd_nat_target.
(_initialize_hppaobsd_nat): Adjust to C++ification. Use
add_target.
* i386-nbsd-nat.c (the_i386_nbsd_nat_target): New.
(_initialize_i386nbsd_nat): Adjust to C++ification. Use
add_target.
* i386-obsd-nat.c (the_i386_obsd_nat_target): New.
(_initialize_i386obsd_nat): Use add_target.
* m68k-bsd-nat.c (m68k_bsd_nat_target): New class.
(the_m68k_bsd_nat_target): New.
(m68kbsd_fetch_inferior_registers)
(m68kbsd_store_inferior_registers): Refactor as methods of
m68k_bsd_nat_target.
(_initialize_m68kbsd_nat): Adjust to C++ification.
* mips-fbsd-nat.c (mips_fbsd_nat_target): New class.
(the_mips_fbsd_nat_target): New.
(mips_fbsd_fetch_inferior_registers)
(mips_fbsd_store_inferior_registers): Refactor as methods of
mips_fbsd_nat_target.
(_initialize_mips_fbsd_nat): Adjust to C++ification. Use
add_target.
* mips-nbsd-nat.c (mips_nbsd_nat_target): New class.
(the_mips_nbsd_nat_target): New.
(mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Refactor as methods of
mips_nbsd_nat_target.
(_initialize_mipsnbsd_nat): Adjust to C++ification.
* mips64-obsd-nat.c (mips64_obsd_nat_target): New class.
(the_mips64_obsd_nat_target): New.
(mips64obsd_fetch_inferior_registers)
(mips64obsd_store_inferior_registers): Refactor as methods of
mips64_obsd_nat_target.
(_initialize_mips64obsd_nat): Adjust to C++ification. Use
add_target.
* nbsd-nat.c (nbsd_pid_to_exec_file): Refactor as method of
nbsd_nat_target.
* nbsd-nat.h: Include "inf-ptrace.h".
(nbsd_nat_target): New class.
* obsd-nat.c (obsd_pid_to_str, obsd_update_thread_list)
(obsd_wait): Refactor as methods of obsd_nat_target.
(obsd_add_target): Delete.
* obsd-nat.h: Include "inf-ptrace.h".
(obsd_nat_target): New class.
* ppc-fbsd-nat.c (ppc_fbsd_nat_target): New class.
(the_ppc_fbsd_nat_target): New.
(ppcfbsd_fetch_inferior_registers)
(ppcfbsd_store_inferior_registers): Refactor as methods of
ppc_fbsd_nat_target.
(_initialize_ppcfbsd_nat): Adjust to C++ification. Use
add_target.
* ppc-nbsd-nat.c (ppc_nbsd_nat_target): New class.
(the_ppc_nbsd_nat_target): New.
(ppcnbsd_fetch_inferior_registers)
(ppcnbsd_store_inferior_registers): Refactor as methods of
ppc_nbsd_nat_target.
(_initialize_ppcnbsd_nat): Adjust to C++ification.
* ppc-obsd-nat.c (ppc_obsd_nat_target): New class.
(the_ppc_obsd_nat_target): New.
(ppcobsd_fetch_registers, ppcobsd_store_registers): Refactor as
methods of ppc_obsd_nat_target.
(_initialize_ppcobsd_nat): Adjust to C++ification. Use
add_target.
* sh-nbsd-nat.c (sh_nbsd_nat_target): New class.
(the_sh_nbsd_nat_target): New.
(shnbsd_fetch_inferior_registers)
(shnbsd_store_inferior_registers): Refactor as methods of
sh_nbsd_nat_target.
(_initialize_shnbsd_nat): Adjust to C++ification.
* sparc-nat.c (sparc_xfer_wcookie): Make extern.
(inf_ptrace_xfer_partial): Delete.
(sparc_xfer_partial, sparc_target): Delete.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers, sparc_xfer_wcookie): Declare.
(sparc_target): Delete function declaration.
(sparc_target): New template class.
* sparc-nbsd-nat.c (the_sparc_nbsd_nat_target): New.
(_initialize_sparcnbsd_nat): Adjust to C++ification.
* sparc64-fbsd-nat.c (the_sparc64_fbsd_nat_target): New.
(_initialize_sparc64fbsd_nat): Adjust to C++ification. Use
add_target.
* sparc64-nbsd-nat.c (the_sparc64_nbsd_nat_target): New.
(_initialize_sparc64nbsd_nat): Adjust to C++ification.
* sparc64-obsd-nat.c (the_sparc64_obsd_nat_target): New.
(_initialize_sparc64obsd_nat): Adjust to C++ification. Use
add_target.
* vax-bsd-nat.c (vax_bsd_nat_target): New class.
(the_vax_bsd_nat_target): New.
(vaxbsd_fetch_inferior_registers)
(vaxbsd_store_inferior_registers): Refactor as vax_bsd_nat_target
methods.
(_initialize_vaxbsd_nat): Adjust to C++ification.
* bsd-kvm.c (bsd_kvm_target): New class.
(bsd_kvm_ops): Now a bsd_kvm_target.
(bsd_kvm_open, bsd_kvm_close, bsd_kvm_xfer_partial)
(bsd_kvm_files_info, bsd_kvm_fetch_registers)
(bsd_kvm_thread_alive, bsd_kvm_pid_to_str): Refactor as methods of
bsd_kvm_target.
(bsd_kvm_return_one): Delete.
(bsd_kvm_add_target): Adjust to C++ification.
* nto-procfs.c (nto_procfs_target, nto_procfs_target_native)
(nto_procfs_target_procfs): New classes.
(procfs_open_1, procfs_thread_alive, procfs_update_thread_list)
(procfs_files_info, procfs_pid_to_exec_file, procfs_attach)
(procfs_post_attach, procfs_wait, procfs_fetch_registers)
(procfs_xfer_partial, procfs_detach, procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint, procfs_resume)
(procfs_mourn_inferior, procfs_create_inferior, procfs_interrupt)
(procfs_kill_inferior, procfs_store_registers)
(procfs_pass_signals, procfs_pid_to_str, procfs_can_run): Refactor
as methods of nto_procfs_target.
(nto_procfs_ops): Now an nto_procfs_target_procfs.
(nto_native_ops): Delete.
(procfs_open, procfs_native_open): Delete.
(nto_native_ops): Now an nto_procfs_target_native.
(init_procfs_targets): Adjust to C++ification.
(procfs_can_use_hw_breakpoint, procfs_remove_hw_watchpoint)
(procfs_insert_hw_watchpoint, procfs_stopped_by_watchpoint):
Refactor as methods of nto_procfs_target.
* go32-nat.c (go32_nat_target): New class.
(the_go32_nat_target): New.
(go32_attach, go32_resume, go32_wait, go32_fetch_registers)
(go32_store_registers, go32_xfer_partial, go32_files_info)
(go32_kill_inferior, go32_create_inferior, go32_mourn_inferior)
(go32_terminal_init, go32_terminal_info, go32_terminal_inferior)
(go32_terminal_ours, go32_pass_ctrlc, go32_thread_alive)
(go32_pid_to_str): Refactor as methods of go32_nat_target.
(go32_target): Delete.
(_initialize_go32_nat): Adjust to C++ification.
* gnu-nat.c (gnu_wait, gnu_resume, gnu_kill_inferior)
(gnu_mourn_inferior, gnu_create_inferior, gnu_attach, gnu_detach)
(gnu_stop, gnu_thread_alive, gnu_xfer_partial)
(gnu_find_memory_regions, gnu_pid_to_str): Refactor as methods of
gnu_nat_target.
(gnu_target): Delete.
* gnu-nat.h (gnu_target): Delete.
(gnu_nat_target): New class.
* i386-gnu-nat.c (gnu_base_target): New.
(i386_gnu_nat_target): New class.
(the_i386_gnu_nat_target): New.
(_initialize_i386gnu_nat): Adjust to C++ification.
gdb/testsuite/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.exp: Adjust to to_resume and
to_log_command renames.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
|
|
value_incref returned its argument just as a convenience, which in the
end turned out to only be used in precisely the cases where
new_reference helps. So, this patch changes value_incref to return
void and changes some value-using code to use new_reference.
I also noticed that the comments for value_incref and value_decref
were swapped, so this patch fixes those.
ChangeLog
2018-04-30 Tom Tromey <tom@tromey.com>
* varobj.c (install_new_value): Use new_reference.
* value.h (value_incref): Return void. Swap intro comment with
value_decref.
* value.c (set_value_parent): Use new_reference.
(value_incref): Return void. Update intro comment.
(release_value): Use new_reference.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use new_reference.
|
|
Add some selftests for these two functions. To to make it easier to
compare sequences of ranges, add operator== and operator!= to compare
two gdb::array_view, and add operator== in struct range.
gdb/ChangeLog:
* value.c: Include "selftest.h" and "common/array-view.h".
(struct range) <operator ==>: New.
(test_ranges_contain): New.
(check_ranges_vector): New.
(test_insert_into_bit_range_vector): New.
(_initialize_values): Register selftests.
* common/array-view.h (operator==, operator!=): New.
|
|
This changes value::contents to be a unique_xmalloc_ptr, removing a
small bit of manual memory management.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* value.c (~value): Update.
(struct value) <contents>: Now unique_xmalloc_ptr.
(value_contents_bits_eq, allocate_value_contents)
(value_contents_raw, value_contents_all_raw)
(value_contents_for_printing, value_contents_for_printing_const)
(set_value_enclosing_type): Update.
|
|
This changes the "optimized_out" and "unavailable" VECs in struct
value to be std::vectors, and then fixes up all the uses.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* value.c (range_s): Remove typedef, VEC.
(struct range): Add operator<.
(range_lessthan): Remove.
(ranges_contain): Change type.
(~value): Update.
(struct value) <unavailable, optimized_out>: Now std::vector.
(value_entirely_available)
(value_entirely_covered_by_range_vector)
(value_entirely_unavailable, value_entirely_optimized_out):
Update.
(insert_into_bit_range_vector): Change argument type.
(find_first_range_overlap): Likewise.
(struct ranges_and_idx, value_contents_bits_eq)
(require_not_optimized_out, require_available): Update.
(ranges_copy_adjusted): Change argument types.
(value_optimized_out, value_copy, value_fetch_lazy): Update.
|
|
This changes value::parent to a value_ref_ptr. This removes a bit of
manual reference count management.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* value.c (~value): Update.
(struct value) <parent>: Now a value_ref_ptr.
(value_parent, set_value_parent, value_address, value_copy):
Update.
|
|
This adds a constructor and destructor to struct value, and then
changes value.c to use "new" and "delete".
While doing this I noticed a memory leak -- value_decref was not
freeing value::optimized_out. This patch fixes this leak.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* value.c (struct value): Add constructor, destructor, and member
initializers.
(allocate_value_lazy, value_decref): Update.
|
|
This patch converts all_values to simply hold a list of references to
values. Now, there's no need to have a value record whether or not it
is released -- there is only a single reference-counting mechanism for
values. So, this also removes value::next, value::released, and
value_next.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* value.c (struct value) <released, next>: Remove.
(all_values): Now a std::vector.
(allocate_value_lazy): Update.
(value_next): Remove.
(value_mark, value_free_to_mark, release_value)
(value_release_to_mark): Update.
|
|
This patch changes value_release_to_mark and fetch_subexp_value to
return a std::vector of value references, rather than relying on the
"next" field that is contained in a struct value. This makes it
simpler to reason about the returned values, and also allows for the
removal of free_value_chain.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* value.h (fetch_subexp_value, value_release_to_mark): Update.
(free_value_chain): Remove.
* value.c (free_value_chain): Remove.
(value_release_to_mark): Return a std::vector.
* ppc-linux-nat.c (num_memory_accesses): Change "chain" to a
std::vector.
(check_condition): Update.
* eval.c (fetch_subexp_value): Change "val_chain" to a
std::vector.
* breakpoint.c (update_watchpoint): Update.
(can_use_hardware_watchpoint): Change "vals" to a std::vector.
|
|
free_all_values is unused, so this removes it.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* value.h (free_all_values): Remove.
* value.c (free_all_values): Remove.
|
|
This simplifies the value history implementation by replacing the
current data structure with a std::vector, and by making the value
history simply hold a reference to each value.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* value.c (VALUE_HISTORY_CHUNK, struct value_history_chunk)
(value_history_chain, value_history_count): Remove.
(value_history): New global.
(record_latest_value, access_value_history, show_values)
(preserve_values): Update.
|
|
Now that value_ref_ptr exists, it is possible to simplify breakpoint
and bpstat memory management by using a value_ref_ptr rather than
manually handling the reference counts.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* value.c (release_value): Update.
* breakpoint.h (struct watchpoint) <val>: Now a value_ref_ptr.
(struct bpstats) <val>: Now a value_ref_ptr.
* breakpoint.c (update_watchpoint, breakpoint_init_inferior)
(~bpstats, bpstats, bpstat_clear_actions, watchpoint_check)
(~watchpoint, print_it_watchpoint, watch_command_1)
(invalidate_bp_value_on_memory_change): Update.
|
|
struct value is internally reference counted and so, while it also has
some ownership rules unique to it, it makes sense to use a gdb_ref_ptr
when managing it automatically.
This patch removes the existing unique_ptr specialization in favor of
a reference-counted pointer. It also introduces two other
clarifications:
1. Rename value_free to value_decref, which I think is more in line
with what the function actually does; and
2. Change release_value to return a gdb_ref_ptr. This change allows
us to remove the confusing release_value_or_incref function,
primarily by making it much simpler to reason about the result of
release_value.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* varobj.c (varobj_clear_saved_item)
(update_dynamic_varobj_children, install_new_value, ~varobj):
Update.
* value.h (value_incref): Move declaration earlier.
(value_decref): Rename from value_free.
(struct value_ref_policy): New.
(value_ref_ptr): New typedef.
(struct value_deleter): Remove.
(gdb_value_up): Remove typedef.
(release_value): Change return type.
(release_value_or_incref): Remove.
* value.c (set_value_parent): Update.
(value_incref): Change return type.
(value_decref): Rename from value_free.
(value_free_to_mark, free_all_values, free_value_chain): Update.
(release_value): Return value_ref_ptr.
(release_value_or_incref): Remove.
(record_latest_value, set_internalvar, clear_internalvar):
Update.
* stack.c (info_frame_command): Don't call value_free.
* python/py-value.c (valpy_dealloc, valpy_new)
(value_to_value_object): Update.
* printcmd.c (do_examine): Update.
* opencl-lang.c (lval_func_free_closure): Update.
* mi/mi-main.c (register_changed_p): Don't call value_free.
* mep-tdep.c (mep_frame_prev_register): Don't call value_free.
* m88k-tdep.c (m88k_frame_prev_register): Don't call value_free.
* m68hc11-tdep.c (m68hc11_frame_prev_register): Don't call
value_free.
* guile/scm-value.c (vlscm_free_value_smob)
(vlscm_scm_from_value): Update.
* frame.c (frame_register_unwind, frame_unwind_register_signed)
(frame_unwind_register_unsigned, get_frame_register_bytes)
(put_frame_register_bytes): Don't call value_free.
* findvar.c (address_from_register): Don't call value_free.
* dwarf2read.c (dwarf2_compute_name): Don't call value_free.
* dwarf2loc.c (entry_data_value_free_closure)
(value_of_dwarf_reg_entry, free_pieced_value_closure)
(dwarf2_evaluate_loc_desc_full): Update.
* breakpoint.c (update_watchpoint, breakpoint_init_inferior)
(~bpstats, bpstats, bpstat_clear_actions, watchpoint_check)
(~watchpoint, watch_command_1)
(invalidate_bp_value_on_memory_change): Update.
* alpha-tdep.c (alpha_register_to_value): Don't call value_free.
|
|
unpack_bits_as_long is documented as sign-extending its result when
the type is signed. However, it was only doing sign-extension in the
case where the field was a bitfield -- that is, not when the "bitsize"
parameter was 0, indicating the size should be taken from the type.
Also, unpack_bits_as_long was incorrectly computing the shift for
big-endian architectures for the non-bitfield case.
This patch fixes these bugs in a straightforward way. A new selftest
is included.
2018-02-26 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/unpack-selftests.c.
* unittests/unpack-selftests.c: New file.
* value.c (unpack_bits_as_long): Fix bugs in non-bitfield cases.
|
|
As reported here:
https://sourceware.org/ml/gdb/2018-02/msg00019.html
the type of values representing static members that are optimized out is
wrong. It currently assigns the type of the containing class rather
than the type of the field. This patch fixes that.
I found a place in m-static.exp already dealing with optimized out
static members, so I just added some gdb_test there.
gdb/ChangeLog:
* value.c (value_static_field): Assign field type instead of
containing type when returning an optimized out value.
gdb/testsuite/ChangeLog:
* gdb.cp/m-static.exp: Check type of optimized out static
member.
|
|
The initial goal of this patch was to remove the usage of
VEC(xmethod_worker_ptr) and corresponding cleanups. I ended up having
to C++ify the xmethod_worker code, to be able to have xmethod_workers
free their data in destructors, and therefore be able to use vectors of
xmethod_worker unique_ptr.
The operations in extension_language_ops that act on one instance of
xmethod_worker (get result type, get args type, invoke) are transformed
to methods of xmethod_worker. xmethod_worker becomes an abstract base
class with virtual pure methods which python_xmethod_worker implements.
The only xmethod-related operation left in extension_language_ops is
get_matching_xmethod_workers, which returns a list of xmethod_workers.
The changes are relatively straightforward, but here are some notes on
things that may raise eyebrows:
- I was not really comfortable with the value_of_xmethod function. At
first it looks like a simple getter, so I considered making it a
method of xmethod_worker. But actually it creates a value and
transfers the ownership of the xmethod_worker to it. It would be a
bit weird and error-prone if calling a method on an object silently
removed the ownership of the object from the caller. To reflect the
behavior more accurately, I renamed it to value_from_xmethod and made
it accept an rvalue-reference (so the caller knows it gives away the
ownership). I noticed the backlink from xmethod_worker to its owning
value was not used, so I removed it.
- Some code, like get_matching_xmethod_workers, made each callee fill
a new vector, which was then merged in the result vector. I think
it's safe if we always pass the same vector around, and each
implementation just appends to it.
- The clone operation does not seem particularly useful, it is removed
in the following patch.
gdb/ChangeLog:
* extension-priv.h (enum ext_lang_rc): Remove, move to extension.h.
(struct extension_language_ops) <clone_xmethod_worker_data>: Remove.
<free_xmethod_worker_data>: Remove.
<get_matching_xmethod_workers>: Chance VEC to std::vector.
<get_xmethod_arg_types>: Remove.
<get_xmethod_result_type>: Remove.
<invoke_xmethod>: Remove.
* extension.c (new_xmethod_worker): Remove.
(clone_xmethod_worker): Remove.
(get_matching_xmethod_workers): Return void, pass std::vector by
pointer.
(get_xmethod_arg_types): Rename to...
(xmethod_worker::get_arg_types): ... this, and adjust.
(get_xmethod_result_type): Rename to...
(xmethod_worker::get_result_type): ... this, and adjust.
(invoke_xmethod): Remove.
(free_xmethod_worker): Remove.
(free_xmethod_worker_vec): Remove.
* extension.h (enum ext_lang_rc): Move here from
extension-priv.h.
(struct xmethod_worker): Add constructor and destructor.
<data>: Remove.
<value>: Remove.
<invoke, clone, do_get_result_type, do_get_arg_types>: New
virtual pure methods.
<get_arg_types, get_result_type>: New methods.
(xmethod_worker_ptr): Remove typedef.
(DEF_VEC_P (xmethod_worker_ptr)): Remove.
(xmethod_worker_vec): Remove typedef.
(xmethod_worker_up): New typedef.
(invoke_xmethod): Remove.
(clone_xmethod_worker): Remove.
(free_xmethod_worker): Remove.
(free_xmethod_worker_vec): Remove.
(get_xmethod_arg_types): Remove.
(get_xmethod_result_type): Remove.
* valops.c (find_method_list): Use std::vector, don't use
intermediate vector.
(value_find_oload_method_list): Use std::vector.
(find_overload_match): Use std::vector.
(find_oload_champ): Use std::vector.
* value.c (value_free): Use operator delete.
(value_of_xmethod): Rename to...
(value_from_xmethod): ... this. Don't assign
xmethod_worker::value, take rvalue-reference.
(result_type_of_xmethod): Adjust.
(call_xmethod): Adjust.
* value.h: Include extension.h.
(struct xmethod_worker): Don't forward-declare.
(value_of_xmethod): Rename to...
(value_from_xmethod): ... this, take rvalue-reference.
* python/py-xmethods.c (struct gdbpy_worker_data): Rename to...
(struct python_xmethod_worker): ... this, add constructor and
destructor.
<invoke, clone, do_get_arg_types, do_get_result_type>: Implement.
(gdbpy_free_xmethod_worker_data): Rename to...
(python_xmethod_worker::~python_xmethod_worker): ... this and
adjust.
(gdbpy_clone_xmethod_worker_data): Rename to...
(python_xmethod_worker::clone): ... this and adjust.
(gdbpy_get_matching_xmethod_workers): Use std::vector, don't use
temporary vector.
(gdbpy_get_xmethod_arg_types): Rename to...
(python_xmethod_worker::do_get_arg_types): ... this and adjust.
(gdbpy_get_xmethod_result_type): Rename to...
(python_xmethod_worker::do_get_result_type): ... this and
adjust.
(gdbpy_invoke_xmethod): Rename to...
(python_xmethod_worker::invoke): ... this and adjust.
(new_python_xmethod_worker): Rename to...
(python_xmethod_worker::python_xmethod_worker): ... this and
adjust.
* python/python-internal.h (gdbpy_clone_xmethod_worker_data):
Remove.
(gdbpy_free_xmethod_worker_data): Remove.
(gdbpy_get_matching_xmethod_workers): Use std::vector.
(gdbpy_get_xmethod_arg_types): Remove.
(gdbpy_get_xmethod_result_type): Remove.
(gdbpy_invoke_xmethod): Remove.
* python/python.c (python_extension_ops): Remove obsolete
callbacks.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
This patch changes value_contents_eq return type from int to bool.
gdb:
2017-11-24 Yao Qi <yao.qi@linaro.org>
* mi/mi-main.c (register_changed_p): Update.
* value.c (value_contents_bits_eq): Change return type.
(value_contents_eq): Likewise.
* value.h: Update comments.
|
|
This constifies the add_setshow_* family of functions, and then fixes
up the fallout. The bulk of this patch was written by script.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* ada-lang.c (catch_ada_exception_command): Constify.
(catch_assert_command): Constify.
* break-catch-throw.c (catch_catch_command, catch_throw_command)
(catch_rethrow_command): Constify.
(catch_exception_command_1): Constify.
* breakpoint.h (add_catch_command): Constify.
* break-catch-syscall.c (catch_syscall_command_1): Constify.
(catch_syscall_split_args): Constify.
* break-catch-sig.c (catch_signal_command): Constify.
(catch_signal_split_args): Constify.
* cli/cli-decode.h (struct cmd_list_element) <function>: Use
cmd_const_sfunc_ftype.
* cli/cli-decode.c (add_setshow_cmd_full): Constify.
(add_setshow_enum_cmd, add_setshow_auto_boolean_cmd)
(add_setshow_boolean_cmd, add_setshow_filename_cmd)
(add_setshow_string_cmd, struct cmd_list_element)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd):
Constify.
(set_cmd_sfunc): Constify.
(empty_sfunc): Constify.
* command.h (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd)
(add_setshow_boolean_cmd, add_setshow_filename_cmd)
(add_setshow_string_cmd, add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
Constify.
(set_cmd_sfunc): Constify.
(cmd_sfunc_ftype): Remove.
* compile/compile.c (set_compile_args): Constify.
* infrun.c (set_disable_randomization): Constify.
* infcmd.c (set_args_command, set_cwd_command): Constify.
* breakpoint.c (set_condition_evaluation_mode): Constify.
(add_catch_command): Constify.
(catch_fork_command_1, catch_exec_command_1)
(catch_load_command_1, catch_unload_command_1): Constify.
(catch_load_or_unload): Constify.
* guile/scm-param.c (pascm_set_func): Constify.
(add_setshow_generic): Constify.
* python/py-param.c (get_set_value): Constify.
* top.h (set_verbose): Constify.
* tui/tui-win.c (tui_set_var_cmd): Constify.
* mi/mi-main.c (set_mi_async_command): Constify.
* cli/cli-logging.c (set_logging_overwrite)
(set_logging_redirect): Constify.
* value.c (set_max_value_size): Constify.
* valprint.c (set_input_radix, set_output_radix): Constify.
* utils.c (set_width_command, set_height_command): Constify.
* typeprint.c (set_print_type_methods, set_print_type_typedefs): Constify.
* tracepoint.c (set_disconnected_tracing)
(set_circular_trace_buffer, set_trace_buffer_size)
(set_trace_user, set_trace_notes, set_trace_stop_notes): Constify.
* top.c (set_history_size_command, set_verbose, set_editing)
(set_gdb_datadir, set_history_filename): Constify.
* target.c (set_targetdebug, maint_set_target_async_command)
(maint_set_target_non_stop_command, set_target_permissions)
(set_write_memory_permission): Constify.
(open_target): Constify.
* target-descriptions.c (set_tdesc_filename_cmd): Constify.
* target-dcache.c (set_stack_cache, set_code_cache): Constify.
* symtab.c (set_symbol_cache_size_handler): Constify.
* symfile.c (set_ext_lang_command): Constify.
* symfile-debug.c (set_debug_symfile): Constify.
* source.c (set_directories_command): Constify.
* solib.c (reload_shared_libraries, gdb_sysroot_changed): Constify.
* serial.c (set_parity): Constify.
* rs6000-tdep.c (powerpc_set_soft_float, powerpc_set_vector_abi): Constify.
* remote.c (set_remote_exec_file, set_remotebreak)
(set_remote_protocol_Z_packet_cmd, set_range_stepping): Constify.
* record.c (set_record_insn_history_size)
(set_record_call_history_size): Constify.
* record-full.c (set_record_full_insn_max_num): Constify.
* proc-api.c (set_procfs_trace_cmd, set_procfs_file_cmd): Constify.
* osabi.c (set_osabi): Constify.
* mips-tdep.c (set_mips64_transfers_32bit_regs)
(reinit_frame_cache_sfunc, mips_abi_update): Constify.
* maint.c (maintenance_set_profile_cmd): Constify.
* linux-thread-db.c (set_libthread_db_search_path): Constify.
* language.c (set_language_command, set_range_command)
(set_case_command): Constify.
* infrun.c (set_non_stop, set_observer_mode)
(set_stop_on_solib_events, set_schedlock_func)
(set_exec_direction_func): Constify.
* infcmd.c (set_inferior_tty_command): Constify.
* disasm.c (set_disassembler_options_sfunc): Constify.
* demangle.c (set_demangling_command): Constify.
* dcache.c (set_dcache_size, set_dcache_line_size): Constify.
* cris-tdep.c (set_cris_version, set_cris_mode)
(set_cris_dwarf2_cfi): Constify.
* corefile.c (set_gnutarget_command): Constify.
* charset.c (set_host_charset_sfunc, set_target_charset_sfunc)
(set_target_wide_charset_sfunc): Constify.
* breakpoint.c (update_dprintf_commands): Constify.
* auto-load.c (set_auto_load_dir, set_auto_load_safe_path): Constify.
* arm-tdep.c (set_fp_model_sfunc, arm_set_abi)
(set_disassembly_style_sfunc): Constify.
* arch-utils.c (set_endian, set_architecture): Constify.
* alpha-tdep.c (reinit_frame_cache_sfunc): Constify.
* agent.c (set_can_use_agent): Constify.
|
|
This removes cmd_cfunc_ftype and the non-const overload of add_cmd;
then fixes up the fallout.
For the most part this patch is straightforward. There are a few
files (go32-nat.c, windows-nat.c, and gnu-nat.c) that I could not
compile; so I made a best effort there.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* go32-nat.c (go32_sysinfo, go32_sldt, go32_sgdt, go32_sidt)
(go32_pde, go32_pte, go32_pte_for_address): Constify.
* gnu-nat.c (_parse_bool_arg, show_thread_default_pause_cmd)
(set_thread_default_pause_cmd, set_thread_default_run_cmd)
(show_thread_default_run_cmd, set_thread_default_detach_sc_cmd)
(parse_int_arg, show_thread_default_detach_sc_cmd)
(set_signals_cmd, show_signals_cmd, set_sig_thread_cmd)
(show_sig_thread_cmd, set_stopped_cmd, show_stopped_cmd)
(set_exceptions_cmd, show_exceptions_cmd, set_task_pause_cmd)
(show_task_pause_cmd, set_task_detach_sc_cmd)
(show_task_detach_sc_cmd, set_task_exc_port_cmd)
(set_noninvasive_cmd, set_thread_pause_cmd)
(show_thread_pause_cmd, set_thread_run_cmd, show_thread_run_cmd)
(set_thread_detach_sc_cmd, show_thread_detach_sc_cmd)
(set_thread_exc_port_cmd, thread_takeover_sc_cmd): Constify.
* windows-nat.c (display_selectors): Constify.
* cli/cli-decode.h (struct cmd_list_element) <function>: Remove
non-const "cfunc".
* cli/cli-decode.c (set_cmd_cfunc): Remove non-const overload.
(cmd_cfunc_eq): Likewise.
(struct cmd_list_element): Likewise.
(do_cfunc): Remove.
(cli_user_command_p): Update.
* command.h (add_cmd): Remove non-const overload.
(cmd_cfunc_ftype): Remove typedef.
(cmd_cfunc_eq): Remove non-const overload.
* value.c (show_values): Constify.
* thread.c (thread_apply_all_command): Constify.
* symfile.c (load_command): Constify.
* source.c (directory_command): Constify.
* maint.c (maintenance_internal_error)
(maintenance_demangler_warning, maintenance_space_display)
(maintenance_print_architecture, maintenance_translate_address)
(maintenance_info_selftests, maintenance_internal_warning):
Constify.
* breakpoint.c (disable_trace_command, enable_trace_command):
Constify.
* auto-load.c (info_auto_load_local_gdbinit, add_auto_load_dir):
Constify.
(add_auto_load_safe_path): Constify.
* guile/scm-auto-load.c (info_auto_load_guile_scripts): Constify.
* top.h (show_commands): Constify.
* linux-thread-db.c (info_auto_load_libthread_db): Constify.
* sparc64-tdep.c (adi_examine_command): Constify.
(adi_assign_command): Constify.
|
|
This changes add_com to take a cmd_const_cfunc_ftype, and then fixes
up all the command implementations.
In most cases this is trivial.
In a couple of places I had to again introduce a temporary non-const
overload. These overloads will be removed when add_info is
constified.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* solib.h (no_shared_libraries): Constify.
* frame.h (return_command): Constify.
* cli/cli-cmds.h (quit_command): Constify.
* top.h (quit_command, execute_command): Constify.
* target.h (flash_erase_command): Constify.
* inferior.h (set_inferior_args, attach_command): Constify.
* tracepoint.h (start_tracing, stop_tracing): Constify.
* breakpoint.h (break_command, tbreak_command)
(hbreak_command_wrapper, thbreak_command_wrapper)
(rbreak_command_wrapper, watch_command_wrapper)
(awatch_command_wrapper, rwatch_command_wrapper)
(get_tracepoint_by_number): Constify.
* symtab.c (info_variables_command, rbreak_command)
(symtab_symbol_info): Constify.
(info_variables_command): Add non-const overload.
* top.c (dont_repeat_command): Constify.
* breakpoint.c (ignore_command, commands_command)
(condition_command, tbreak_command, hbreak_command)
(thbreak_command, clear_command, break_command)
(info_breakpoints_command, watch_command, rwatch_command)
(awatch_command, trace_command, ftrace_command, strace_command)
(trace_pass_command, break_range_command, dprintf_command)
(agent_printf_command, get_tracepoint_by_number)
(watch_maybe_just_location, trace_pass_command): Constify.
(info_breakpoints_command): Add non-const overload.
* tracefile.c (tsave_command): Constify.
* infcmd.c (attach_command, disconnect_command, signal_command)
(queue_signal_command, stepi_command, nexti_command)
(finish_command, next_command, step_command, until_command)
(advance_command, jump_command, continue_command, run_command)
(start_command, starti_command, interrupt_command)
(run_command_1, set_inferior_args, step_1): Constify.
* inferior.c (add_inferior_command, remove_inferior_command)
(clone_inferior_command): Constify.
* linux-fork.c (checkpoint_command, restart_command): Constify.
* windows-nat.c (signal_event_command): Constify.
* guile/guile.c (guile_repl_command, guile_command): Constify.
* printcmd.c (x_command, display_command, printf_command)
(output_command, set_command, call_command, print_command)
(eval_command): Constify.
(non_const_set_command): Remove.
(_initialize_printcmd): Update.
* source.c (forward_search_command, reverse_search_command):
Constify.
* jit.c (jit_reader_load_command, jit_reader_unload_command):
Constify.
* infrun.c (handle_command): Constify.
* memattr.c (mem_command): Constify.
* stack.c (return_command, up_command, up_silently_command)
(down_command, down_silently_command, frame_command)
(backtrace_command, func_command, backtrace_command_1): Constify.
(backtrace_command): Add non-const overload.
* remote-sim.c (simulator_command): Constify.
* exec.c (set_section_command): Constify.
* tracepoint.c (tdump_command, trace_variable_command)
(tstatus_command, tstop_command, tstart_command)
(end_actions_pseudocommand, while_stepping_pseudocommand)
(collect_pseudocommand, teval_pseudocommand, actions_command)
(start_tracing, stop_tracing): Constify.
* value.c (init_if_undefined_command): Constify.
* tui/tui-stack.c (tui_update_command): Constify.
* tui/tui-win.c (tui_refresh_all_command)
(tui_set_tab_width_command, tui_set_win_height_command)
(tui_set_focus_command, tui_scroll_forward_command)
(tui_scroll_backward_command, tui_scroll_left_command)
(tui_scroll_right_command, parse_scrolling_args, tui_set_focus)
(tui_set_win_height): Constify.
* tui/tui-layout.c (tui_layout_command): Constify.
* procfs.c (proc_trace_syscalls, proc_trace_sysentry_cmd)
(proc_trace_sysexit_cmd, proc_untrace_sysentry_cmd)
(proc_untrace_sysexit_cmd): Constify.
* remote.c (threadlist_test_cmd, threadinfo_test_cmd)
(threadset_test_cmd, threadlist_update_test_cmd)
(threadalive_test): Constify.
* objc-lang.c (print_object_command): Constify.
* command.h (add_com): Constify.
* cli/cli-dump.c (restore_command): Constify.
* cli/cli-cmds.c (pwd_command, echo_command, quit_command)
(help_command, complete_command, shell_command, edit_command)
(list_command, disassemble_command, make_command)
(apropos_command, alias_command): Constify.
* cli/cli-script.c (document_command, define_command)
(while_command, if_command, validate_comname): Constify.
* cli/cli-decode.c (struct cmd_list_element): Change type of
"fun".
* target.c (do_monitor_command, flash_erase_command): Constify.
* regcache.c (reg_flush_command): Constify.
* reverse.c (reverse_step, reverse_next, reverse_stepi)
(reverse_nexti, reverse_continue, reverse_finish)
(save_bookmark_command, goto_bookmark_command)
(exec_reverse_once): Constify.
* python/python.c (python_interactive_command, python_command):
Constify.
* typeprint.c (ptype_command, whatis_command, whatis_exp):
Constify.
* solib.c (sharedlibrary_command, no_shared_libraries): Constify.
* gcore.c (gcore_command): Constify.
|
|
The "x", "list", and "show commands" commands have special repetition
behavior: repeating the command doesn't re-run it with the same
arguments
This is currently implemented by modifying the passed-in argument; but
that won't work properly with const arguments (and seems pretty
obscure besides).
This patch adds a new "set_repeat_arguments" function and changes the
relevant places to call it.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* printcmd.c (x_command): Call set_repeat_arguments.
* cli/cli-cmds.c (list_command): Call set_repeat_arguments.
* top.c (repeat_arguments): New global.
(set_repeat_arguments): New function.
(execute_command): Handle repeat_arguments.
(show_commands): Calls set_repeat_arguments.
* command.h (set_repeat_arguments): Declare.
|
|
This patch removes the following routines, which now have no remaining
users in GDB:
- extract_typed_floating
- store_typed_floating
- convert_typed_floating
- decimal_from_doublest
- decimal_to_doublest
- value_as_double
- unpack_double
- value_from_double
- value_from_decfloat
This completes removal of DOUBLEST from all files except doublest.{c,h}
and target-float.c.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* doublest.c: Do not include "gdbtypes.h".
(extract_typed_floating): Remove.
(store_typed_floating): Remove.
(convert_typed_floating): Remove.
* doublest.h (struct type): Remove.
(DOUBLEST_PRINT_FORMAT): Remove.
(DOUBLEST_SCAN_FORMAT): Remove.
(extract_typed_floating): Remove.
(store_typed_floating): Remove.
(convert_typed_floating): Remove.
* dfp.c (decimal_from_doublest): Remove.
(decimal_to_doublest): Remove.
* dfp.h: Do not include "doublest.h".
(decimal_from_doublest): Remove.
(decimal_to_doublest): Remove.
* value.c: Do not include "doublest.h" and "dfp.h".
(value_as_double): Remove.
(unpack_double): Remove.
(value_from_double): Remove.
(value_from_decfloat): Remove.
* value.h: Do not include "doublest.h".
(value_as_double): Remove.
(unpack_double): Remove.
(value_from_double): Remove.
(value_from_decfloat): Remove.
|
|
This patch adds the following conversion routines:
- target_float_to_longest
- target_float_from_longest
- target_float_from_ulongest
- target_float_convert
which call the equivalent decimal_ routines to handle decimal FP,
and call helper routines that currently still go via DOUBLEST to
handle binary FP.
The target_float_convert routine not only handles BFP<->BFP and
DFP<->DFP conversions, but also BFP<->DFP, which are implemented
by converting to a string and back.
These helpers are used in particular to implement conversion
from and to FP in value_cast, without going through DOUBLEST there.
In order to implement this for the FP<-integer case, the
pack_long / pack_unsigned_long routines are extended to support
floating-point values as output (thereby allowing use of
value_from_[u]longest with a floating-point target type).
This latter change also allows simplification of value_one.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* target-float.c (floatformat_to_longest): New function.
(floatformat_from_longest, floatformat_from_ulongest): Likewise.
(floatformat_convert): Likewise.
(target_float_to_longest): Likewise.
(target_float_from_longest, target_float_from_ulongest): Likewise.
(target_float_convert): Likewise.
* target-float.h (target_float_to_longest): Add prototype.
(target_float_from_longest, target_float_from_ulongest): Likewise.
(target_float_convert): Likewise.
* value.c (unpack_long): Use target_float_to_longest.
(pack_long): Allow FP types. Use target_float_from_longest.
(pack_unsigned_long): Likewise using target_float_from_ulongest.
* valops.c: Include "target-float.h". Do not include "dfp.h".
(value_cast): Handle conversions to FP using target_float_convert,
value_from_ulongest, and value_from_longest.
(value_one): Use value_from_longest for FP types as well.
|
|
This patch introduces the new set of target floating-point handling routines
in target-float.{c,h}. In the end, the intention is that this file will
contain support for all operations in target FP format, fully replacing
both the current doublest.{c,h} and dfp.{c,h}.
To begin with, this patch only adds a target_float_is_zero routine,
which handles the equivalent of decimal_is_zero for both binary and
decimal FP. For the binary case, to avoid conversion to DOUBLEST,
this is implemented using the floatformat_classify routine.
However, it turns out that floatformat_classify actually has a bug
(it was not used to check for zero before), so this is fixed as well.
The new routine is used in both value_logical_not and valpy_nonzero.
There is one extra twist: the code previously used value_as_double
to convert to DOUBLEST and then compare against zero. That routine
performs an extra task: it detects invalid floating-point values
and raises an error. In any place where value_as_double is removed
in favor of some target-float.c routine, we need to replace that check.
To keep this check centralized in one place, I've added a new routine
is_floating_value, which returns a boolean determining whether a
value's type is floating point (binary or decimal), and if so, also
performs the validity check. Since we need to check whether a value
is FP before calling any of the target-float routines anyway, this
seems a good place to add the check without much code size overhead.
In some places where we only want to check for floating-point types
and not perform a validity check (e.g. for the *output* of an operation),
we can use the new is_floating_type routine (in gdbarch) instead.
The validity check itself is done by a new target_float_is_valid
routine in target-float, encapsulating floatformat_is_valid.
ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.c (SFILES): Add target-float.c.
(HFILES_NO_SRCDIR): Add target-float.h.
(COMMON_OBS): Add target-float.o.
* target-float.h: New file.
* target-float.c: New file.
* doublest.c (floatformat_classify): Fix detection of float_zero.
* gdbtypes.c (is_floating_type): New function.
* gdbtypes.h (is_floating_type): Add prototype.
* value.c: Do not include "floatformat.h".
(unpack_double): Use target_float_is_valid.
(is_floating_value): New function.
* value.h (is_floating_value): Add prototype-
* valarith.c: Include "target-float.h".
(value_logical_not): Use target_float_is_zero.
* python/py-value.c: Include "target-float.h".
(valpy_nonzero): Use target_float_is_zero.
|
|
This changes add_prefix_cmd to accept a const-taking function as an
argument; then fixes up all the callers.
In a couple of spots I had to add a non-const overload of a function,
because the function is passed to two different command-adding
"constructors". These overloads are temporary; once constification is
complete they can be removed.
This patch also fixes a typo I happened to notice while constifying.
Note that this touches a couple of files (gnu-nat.c and go32-nat.c)
that I can't build. So, while I made a best-effort there, I am not
certain they will still compile.
Tested by rebuilding.
gdb/ChangeLog
2017-10-11 Tom Tromey <tom@tromey.com>
* gdbthread.h (thread_command): Constify.
* inferior.h (detach_command): Constify.
* top.h (set_history, show_history): Constify.
* arm-tdep.c (set_arm_command, show_arm_command): Constify.
* serial.c (serial_set_cmd, serial_show_cmd): Constify.
* bsd-kvm.c (bsd_kvm_cmd): Constify.
* printcmd.c (set_command): Constify.
(non_const_set_command): New function.
* dcache.c (set_dcache_command, show_dcache_command): Constify.
* breakpoint.c (enable_command, disable_command, delete_command)
(catch_command, tcatch_command, set_breakpoint_cmd)
(show_breakpoint_cmd): Constify.
* macrocmd.c (macro_command): Constify.
* infcmd.c (unset_command, kill_command, detach_command)
(info_proc_cmd): Constify.
* i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Constify.
* auto-load.c (show_auto_load_cmd, set_auto_load_cmd)
(info_auto_load_cmd): Constify.
* target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd)
(unset_tdesc_cmd): Constify.
* ada-lang.c (set_ada_command, show_ada_command)
(maint_set_ada_cmd, maint_show_ada_cmd): Constify.
* guile/guile.c (set_guile_command, show_guile_command)
(info_guile_command): Constify.
* tui/tui-win.c (tui_command, set_tui_cmd, show_tui_cmd):
Constify.
* skip.c (skip_command): Constify.
* compile/compile.c (_initialize_compile): Constify.
* dwarf2read.c (set_dwarf_cmd, show_dwarf_cmd): Constify.
* btrace.c (maint_btrace_cmd, maint_btrace_set_cmd)
(maint_btrace_show_cmd, maint_btrace_pt_set_cmd)
(maint_btrace_pt_show_cmd): Constify.
* remote.c (set_remote_cmd, show_remote_cmd, remote_command):
Constify.
* python/python.c (user_show_python, user_set_python): Constify.
* mips-tdep.c (set_mips_command, show_mips_command)
(set_mipsfpu_command): Constify.
* record-btrace.c (cmd_record_btrace_start)
(cmd_set_record_btrace, cmd_show_record_btrace)
(cmd_set_record_btrace_bts, cmd_show_record_btrace_bts)
(cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): Constify.
* rs6000-tdep.c (set_powerpc_command, show_powerpc_command):
Constify.
* symfile.c (overlay_command): Constify.
* spu-tdep.c (set_spu_command, show_spu_command): Constify.
* cli/cli-logging.c (set_logging_command, show_logging_command):
Constify.
* cli/cli-dump.c (dump_command, append_command)
(srec_dump_command, ihex_dump_command, verilog_dump_command)
(tekhex_dump_command, binary_dump_command)
(binary_append_command): Constify.
* cli/cli-decode.c (struct cmd_list_element): Change type of
"fun".
* cli/cli-cmds.c (info_command, show_command, set_debug)
(show_debug): Constify.
(show_command): Add non-const overload.
* top.c (set_history, show_history): Constify.
* sh-tdep.c (set_sh_command, show_sh_command): Constify.
* command.h (add_prefix_cmd): Accept a cmd_const_cfunc_ftype.
* target.c (target_command): Constify.
* sparc64-tdep.c (info_adi_command): Constify.
* record-full.c (cmd_record_full_start): Constify.
(set_record_full_command): Constify. Fix typo.
(show_record_full_command): Constify.
* thread.c (thread_command, thread_apply_command): Constify.
* memattr.c (dummy_cmd): Constify.
* value.c (function_command): Constify.
* frame.c (set_backtrace_cmd, show_backtrace_cmd): Constify.
* probe.c (info_probes_command): Constify.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Constify.
* gnu-nat.c (set_task_cmd, show_task_cmd, set_thread_cmd)
(show_thread_cmd, set_thread_default_cmd)
(show_thread_default_cmd): Constify.
(check_empty): Constify.
* tracepoint.c (tfind_command): Constify.
* cp-support.c (maint_cplus_command): Constify.
* windows-tdep.c (info_w32_command): Constify.
* record.c (cmd_record_start, set_record_command)
(show_record_command, info_record_command, cmd_record_goto):
Constify.
* ravenscar-thread.c (set_ravenscar_command)
(show_ravenscar_command): Constify.
* utils.c (set_internal_problem_cmd, show_internal_problem_cmd):
Constify.
(add_internal_problem_command): Remove casts.
* arc-tdep.c (maintenance_print_arc_command): Constify.
* valprint.c (set_print, show_print, set_print_raw)
(show_print_raw): Constify.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_print_command, maintenance_set_cmd)
(maintenance_show_cmd, set_per_command_cmd)
(show_per_command_cmd, maintenance_check_command): Constify.
* language.c (set_check, show_check): Constify.
* typeprint.c (show_print_type, set_print_type): Constify.
* go32-nat.c (go32_info_dos_command): Constify.
|
|
This cleans up a number of interfaces in dfp.c / dfp.h. Specifically:
- The decimal_from_string / decimal_to_string routines are C++-ified
to operate on std::string instead of character buffers. In the
decimal_from_string, the boolean return value now actually is bool
instead of an int.
- The decimal_from_integral and decimal_from_doublest routines take
an struct value as input. This is not really appropriate at the low
level the DFP routines sit, so this replaced them with new routines
decimal_from_longest / decimal_from_ulongest / decimal_from_doublest
that operate on contents instead.
- To mirror the decimal_from_[u]longest, a new decimal_to_longest
routine is added as well, which can be used in unpack_long to
avoid an unnecessary conversion via DOUBLEST.
Note that the decimal_from_longest / decimal_from_ulongest routines
are actually more powerful than decimal_from_integral: the old routine
would only accept integer *types* of at most four bytes size, while
the new routines accept all integer *values* that fit in an [u]int32_t,
no matter which type they came from. The DFP tests are updated to
allow for this larger range of integers that can be converted.
gdb/ChangeLog:
2017-10-05 Ulrich Weigand <uweigand@de.ibm.com>
* dfp.h (MAX_DECIMAL_STRING): Move to dfp.c.
(decimal_to_string): Return std::string object.
(decimal_from_string): Accept std::string object. Return bool.
(decimal_from_integral, decimal_from_doublest): Remove.
(decimal_from_longest): Add prototype.
(decimal_from_ulongest): Likewise.
(decimal_to_longest): Likewise.
(decimal_from_doublest): Likewise.
* dfp.c: Do not include "gdbtypes.h" or "value.h".
(MAX_DECIMAL_STRING): Move here.
(decimal_to_string): Return std::string object.
(decimal_from_string): Accept std::string object. Return bool.
(decimal_from_integral): Remove, replace by ...
(decimal_from_longest, decimal_from_ulongest): ... these new functions.
(decimal_to_longest): New function.
(decimal_from_floating): Remove, replace by ...
(decimal_from_doublest): ... this new function.
(decimal_to_doublest): Update to new decimal_to_string interface.
* value.c (unpack_long): Use decimal_to_longest.
* valops.c (value_cast): Use decimal_from_doublest instead of
decimal_from_floating. Use decimal_from_[u]longest isntead of
decimal_from_integral.
* valarith.c (value_args_as_decimal): Likewise.
* valprint.c (print_decimal_floating): Update to new
decimal_to_string interface.
* printcmd.c (printf_decfloat): Likewise.
* c-exp.y (parse_number): Update to new decimal_from_string interface.
gdb/testsuite/ChangeLog:
2017-10-05 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.base/dfp-exprs.exp: Update tests to larger range of supported
integer-to-dfp conversion.
* gdb.base/dfp-test.exp: Likewise.
|
|
As a first small step to getting rid of doublest.h, this patch removes the
include of "floatformat.h" in "doublest.h". This is actually not needed
for the file itself. A few source files now need to include "floatformat.h"
directly, since they got it indirectly via "doublest.h" and still need it.
In reviewing which files need it, I found a number of files that include
"floatformat.h" directly without actually needing it at all. Similarly,
a number of files include "doublest.h" without needing it. I've also
removed those unnecessary include statements.
gdb/ChangeLog:
2017-10-05 Ulrich Weigand <uweigand@de.ibm.com>
* doublest.h: Do not include "floatformat.h". Remove stale comments.
* gdbtypes.c: Include "floatformat.h".
* value.c: Likewise.
* m68k-tdep.c: Likewise.
* findvar.c: Do not include "floatformat.h".
* amd64-darwin-tdep.c: Likewise.
* arm-linux-tdep.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* m68k-linux-tdep.c: Likewise.
* mep-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* s390-linux-tdep.c: Likewise.
* sparc-obsd-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* spu-tdep.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* vax-tdep.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-tdep.c: Likewise.
* top.c: Do not include "doublest.h".
* aarch64-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* arm-linux-tdep.c: Likewise.
* m68k-linux-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* xstormy16-tdep.c: Likewise.
|
|
gdb/ChangeLog
2017-09-27 Tom Tromey <tom@tromey.com>
* value.c (show_convenience): Constify.
|
