| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
I stumbled across an ancient FIXME comment that was easy to fix --
val_prettyformat does not need to be in defs.h, and is easily moved to
valprint.h, where (despite what the comment says) it belongs.
Tested by rebuilding.
|
|
This commit splits the `set/show print elements' option into two. We
retain `set/show print elements' for controlling how many elements of an
array we print, but a new `set/show print characters' setting is added
which is used for controlling how many characters of a string are
printed.
The motivation behind this change is to allow users a finer level of
control over how data is printed, reflecting that, although strings can
be thought of as arrays of characters, users often want to treat these
two things differently.
For compatibility reasons by default the `set/show print characters'
option is set to `elements', which makes the limit for character strings
follow the setting of the `set/show print elements' option, as it used
to. Using `set print characters' with any other value makes the limit
independent from the `set/show print elements' setting, however it can
be restored to the default with the `set print characters elements'
command at any time.
A corresponding `-characters' option for the `print' command is added,
with the same semantics, i.e. one can use `elements' to make a given
`print' invocation follow the limit of elements, be it set with the
`-elements' option also given with the same invocation or taken from the
`set/show print elements' setting, for characters as well regardless of
the current setting of the `set/show print characters' option.
The GDB changes are all pretty straightforward, just changing references
to the old 'print_max' to use a new `get_print_max_chars' helper which
figures out which of the two of `print_max' and `print_max_chars' values
to use.
Likewise, the documentation is just updated to reference the new setting
where appropriate.
To make people's life easier the message shown by `show print elements'
now indicates if the setting also applies to character strings:
(gdb) set print characters elements
(gdb) show print elements
Limit on string chars or array elements to print is 200.
(gdb) set print characters unlimited
(gdb) show print elements
Limit on array elements to print is 200.
(gdb)
and the help text shows the dependency as well:
(gdb) help set print elements
Set limit on array elements to print.
"unlimited" causes there to be no limit.
This setting also applies to string chars when "print characters"
is set to "elements".
(gdb)
In the testsuite there are two minor updates, one to add `-characters'
to the list of completions now shown for the `print' command, and a bare
minimum pair of checks for the right handling of `set print characters'
and `show print characters', copied from the corresponding checks for
`set print elements' and `show print elements' respectively.
Co-Authored-By: Maciej W. Rozycki <macro@embecosm.com>
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
|
|
Remove the macro, replace all uses with calls to type::length.
Change-Id: Ib9bdc954576860b21190886534c99103d6a47afb
|
|
'finish_print' does not really belong in value_print_options -- this
is consulted only when deciding whether or not to print a value, and
never during the course of printing. This patch removes it from the
structure and makes it a static global in infcmd.c instead.
Tested on x86-64 Fedora 34.
|
|
Make an introduction of a new print setting that can be set by 'set
print nibbles [on|off]'. The default value if OFF, which can be changed
by user manually. Of course, 'show print nibbles' is also included in
the patch.
The new feature displays binary values by group, with four bits per
group. The motivation for this work is to enhance the readability of
binary values.
Here's a GDB session before this patch is applied.
(gdb) print var_a
$1 = 1230
(gdb) print/t var_a
$2 = 10011001110
With this patch applied, we can use the new print setting to display the
new form of the binary values.
(gdb) print var_a
$1 = 1230
(gdb) print/t var_a
$2 = 10011001110
(gdb) set print nibbles on
(gdb) print/t var_a
$3 = 0100 1100 1110
Tested on x86_64 openSUSE Tumbleweed.
|
|
This moves the two overloads of target_read_string to a new file,
target/target.c, and updates both gdb and gdbserver to build this.
|
|
target_read_string takes a byte order parameter, but only uses this to
check whether a given character is zero. This is readily done without
requiring the parameter, so remove it.
|
|
This renames read_string to be an overload of target_read_string.
This makes it more consistent for the eventual merger with gdbserver.
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
Extend the "x" and "print" commands to make use of memory tagging
functionality, if supported by the architecture.
The "print" command will point out any possible tag mismatches it finds
when dealing with pointers, in case such a pointer is tagged. No additional
modifiers are needed.
Suppose we have a pointer "p" with value 0x1234 (logical tag 0x0) and that we
have an allocation tag of 0x1 for that particular area of memory. This is the
expected output:
(gdb) p/x p
Logical tag (0x0) does not match the allocation tag (0x1).
$1 = 0x1234
The "x" command has a new 'm' modifier that will enable displaying of
allocation tags alongside the data dump. It will display one allocation
tag per line.
AArch64 has a tag granule of 16 bytes, which means we can have one tag for
every 16 bytes of memory. In this case, this is what the "x" command will
display with the new 'm' modifier:
(gdb) x/32bxm p
<Allocation Tag 0x1 for range [0x1230,0x1240)>
0x1234: 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00
0x123c: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
<Allocation Tag 0x1 for range [0x1240,0x1250)>
0x1244: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x124c: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
(gdb) x/4gxm a
<Allocation Tag 0x1 for range [0x1230,0x1240)>
0x1234: 0x0000000000000201 0x0000000000000000
<Allocation Tag 0x1 for range [0x1240,0x1250)>
0x1244: 0x0000000000000000 0x0000000000000000
gdb/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* printcmd.c (decode_format): Handle the 'm' modifier.
(do_examine): Display allocation tags when required/supported.
(should_validate_memtags): New function.
(print_command_1): Display memory tag mismatches.
* valprint.c (show_memory_tag_violations): New function.
(value_print_option_defs): Add new option "memory-tag-violations".
(user_print_options) <memory_tag_violations>: Initialize to 1.
* valprint.h (struct format_data) <print_tags>: New field.
(value_print_options) <memory_tag_violations>: New field.
gdb/testsuite/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* gdb.base/options.exp: Adjust for new print options.
* gdb.base/with.exp: Likewise.
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
Spotted that print_char_chars appears to be unused, delete it. There
should be no user visible changes after this commit.
gdb/ChangeLog:
* valprint.c (print_char_chars): Delete definition.
* valprint.h (print_char_chars): Delete declaration.
|
|
Many spots incorrectly use only spaces for indentation (for example,
there are a lot of spots in ada-lang.c). I've always found it awkward
when I needed to edit one of these spots: do I keep the original wrong
indentation, or do I fix it? What if the lines around it are also
wrong, do I fix them too? I probably don't want to fix them in the same
patch, to avoid adding noise to my patch.
So I propose to fix as much as possible once and for all (hopefully).
One typical counter argument for this is that it makes code archeology
more difficult, because git-blame will show this commit as the last
change for these lines. My counter counter argument is: when
git-blaming, you often need to do "blame the file at the parent commit"
anyway, to go past some other refactor that touched the line you are
interested in, but is not the change you are looking for. So you
already need a somewhat efficient way to do this.
Using some interactive tool, rather than plain git-blame, makes this
trivial. For example, I use "tig blame <file>", where going back past
the commit that changed the currently selected line is one keystroke.
It looks like Magit in Emacs does it too (though I've never used it).
Web viewers of Github and Gitlab do it too. My point is that it won't
really make archeology more difficult.
The other typical counter argument is that it will cause conflicts with
existing patches. That's true... but it's a one time cost, and those
are not conflicts that are difficult to resolve. I have also tried "git
rebase --ignore-whitespace", it seems to work well. Although that will
re-introduce the faulty indentation, so one needs to take care of fixing
the indentation in the patch after that (which is easy).
gdb/ChangeLog:
* aarch64-linux-tdep.c: Fix indentation.
* aarch64-ravenscar-thread.c: Fix indentation.
* aarch64-tdep.c: Fix indentation.
* aarch64-tdep.h: Fix indentation.
* ada-lang.c: Fix indentation.
* ada-lang.h: Fix indentation.
* ada-tasks.c: Fix indentation.
* ada-typeprint.c: Fix indentation.
* ada-valprint.c: Fix indentation.
* ada-varobj.c: Fix indentation.
* addrmap.c: Fix indentation.
* addrmap.h: Fix indentation.
* agent.c: Fix indentation.
* aix-thread.c: Fix indentation.
* alpha-bsd-nat.c: Fix indentation.
* alpha-linux-tdep.c: Fix indentation.
* alpha-mdebug-tdep.c: Fix indentation.
* alpha-nbsd-tdep.c: Fix indentation.
* alpha-obsd-tdep.c: Fix indentation.
* alpha-tdep.c: Fix indentation.
* amd64-bsd-nat.c: Fix indentation.
* amd64-darwin-tdep.c: Fix indentation.
* amd64-linux-nat.c: Fix indentation.
* amd64-linux-tdep.c: Fix indentation.
* amd64-nat.c: Fix indentation.
* amd64-obsd-tdep.c: Fix indentation.
* amd64-tdep.c: Fix indentation.
* amd64-windows-tdep.c: Fix indentation.
* annotate.c: Fix indentation.
* arc-tdep.c: Fix indentation.
* arch-utils.c: Fix indentation.
* arch/arm-get-next-pcs.c: Fix indentation.
* arch/arm.c: Fix indentation.
* arm-linux-nat.c: Fix indentation.
* arm-linux-tdep.c: Fix indentation.
* arm-nbsd-tdep.c: Fix indentation.
* arm-pikeos-tdep.c: Fix indentation.
* arm-tdep.c: Fix indentation.
* arm-tdep.h: Fix indentation.
* arm-wince-tdep.c: Fix indentation.
* auto-load.c: Fix indentation.
* auxv.c: Fix indentation.
* avr-tdep.c: Fix indentation.
* ax-gdb.c: Fix indentation.
* ax-general.c: Fix indentation.
* bfin-linux-tdep.c: Fix indentation.
* block.c: Fix indentation.
* block.h: Fix indentation.
* blockframe.c: Fix indentation.
* bpf-tdep.c: Fix indentation.
* break-catch-sig.c: Fix indentation.
* break-catch-syscall.c: Fix indentation.
* break-catch-throw.c: Fix indentation.
* breakpoint.c: Fix indentation.
* breakpoint.h: Fix indentation.
* bsd-uthread.c: Fix indentation.
* btrace.c: Fix indentation.
* build-id.c: Fix indentation.
* buildsym-legacy.h: Fix indentation.
* buildsym.c: Fix indentation.
* c-typeprint.c: Fix indentation.
* c-valprint.c: Fix indentation.
* c-varobj.c: Fix indentation.
* charset.c: Fix indentation.
* cli/cli-cmds.c: Fix indentation.
* cli/cli-decode.c: Fix indentation.
* cli/cli-decode.h: Fix indentation.
* cli/cli-script.c: Fix indentation.
* cli/cli-setshow.c: Fix indentation.
* coff-pe-read.c: Fix indentation.
* coffread.c: Fix indentation.
* compile/compile-cplus-types.c: Fix indentation.
* compile/compile-object-load.c: Fix indentation.
* compile/compile-object-run.c: Fix indentation.
* completer.c: Fix indentation.
* corefile.c: Fix indentation.
* corelow.c: Fix indentation.
* cp-abi.h: Fix indentation.
* cp-namespace.c: Fix indentation.
* cp-support.c: Fix indentation.
* cp-valprint.c: Fix indentation.
* cris-linux-tdep.c: Fix indentation.
* cris-tdep.c: Fix indentation.
* darwin-nat-info.c: Fix indentation.
* darwin-nat.c: Fix indentation.
* darwin-nat.h: Fix indentation.
* dbxread.c: Fix indentation.
* dcache.c: Fix indentation.
* disasm.c: Fix indentation.
* dtrace-probe.c: Fix indentation.
* dwarf2/abbrev.c: Fix indentation.
* dwarf2/attribute.c: Fix indentation.
* dwarf2/expr.c: Fix indentation.
* dwarf2/frame.c: Fix indentation.
* dwarf2/index-cache.c: Fix indentation.
* dwarf2/index-write.c: Fix indentation.
* dwarf2/line-header.c: Fix indentation.
* dwarf2/loc.c: Fix indentation.
* dwarf2/macro.c: Fix indentation.
* dwarf2/read.c: Fix indentation.
* dwarf2/read.h: Fix indentation.
* elfread.c: Fix indentation.
* eval.c: Fix indentation.
* event-top.c: Fix indentation.
* exec.c: Fix indentation.
* exec.h: Fix indentation.
* expprint.c: Fix indentation.
* f-lang.c: Fix indentation.
* f-typeprint.c: Fix indentation.
* f-valprint.c: Fix indentation.
* fbsd-nat.c: Fix indentation.
* fbsd-tdep.c: Fix indentation.
* findvar.c: Fix indentation.
* fork-child.c: Fix indentation.
* frame-unwind.c: Fix indentation.
* frame-unwind.h: Fix indentation.
* frame.c: Fix indentation.
* frv-linux-tdep.c: Fix indentation.
* frv-tdep.c: Fix indentation.
* frv-tdep.h: Fix indentation.
* ft32-tdep.c: Fix indentation.
* gcore.c: Fix indentation.
* gdb_bfd.c: Fix indentation.
* gdbarch.sh: Fix indentation.
* gdbarch.c: Re-generate
* gdbarch.h: Re-generate.
* gdbcore.h: Fix indentation.
* gdbthread.h: Fix indentation.
* gdbtypes.c: Fix indentation.
* gdbtypes.h: Fix indentation.
* glibc-tdep.c: Fix indentation.
* gnu-nat.c: Fix indentation.
* gnu-nat.h: Fix indentation.
* gnu-v2-abi.c: Fix indentation.
* gnu-v3-abi.c: Fix indentation.
* go32-nat.c: Fix indentation.
* guile/guile-internal.h: Fix indentation.
* guile/scm-cmd.c: Fix indentation.
* guile/scm-frame.c: Fix indentation.
* guile/scm-iterator.c: Fix indentation.
* guile/scm-math.c: Fix indentation.
* guile/scm-ports.c: Fix indentation.
* guile/scm-pretty-print.c: Fix indentation.
* guile/scm-value.c: Fix indentation.
* h8300-tdep.c: Fix indentation.
* hppa-linux-nat.c: Fix indentation.
* hppa-linux-tdep.c: Fix indentation.
* hppa-nbsd-nat.c: Fix indentation.
* hppa-nbsd-tdep.c: Fix indentation.
* hppa-obsd-nat.c: Fix indentation.
* hppa-tdep.c: Fix indentation.
* hppa-tdep.h: Fix indentation.
* i386-bsd-nat.c: Fix indentation.
* i386-darwin-nat.c: Fix indentation.
* i386-darwin-tdep.c: Fix indentation.
* i386-dicos-tdep.c: Fix indentation.
* i386-gnu-nat.c: Fix indentation.
* i386-linux-nat.c: Fix indentation.
* i386-linux-tdep.c: Fix indentation.
* i386-nto-tdep.c: Fix indentation.
* i386-obsd-tdep.c: Fix indentation.
* i386-sol2-nat.c: Fix indentation.
* i386-tdep.c: Fix indentation.
* i386-tdep.h: Fix indentation.
* i386-windows-tdep.c: Fix indentation.
* i387-tdep.c: Fix indentation.
* i387-tdep.h: Fix indentation.
* ia64-libunwind-tdep.c: Fix indentation.
* ia64-libunwind-tdep.h: Fix indentation.
* ia64-linux-nat.c: Fix indentation.
* ia64-linux-tdep.c: Fix indentation.
* ia64-tdep.c: Fix indentation.
* ia64-tdep.h: Fix indentation.
* ia64-vms-tdep.c: Fix indentation.
* infcall.c: Fix indentation.
* infcmd.c: Fix indentation.
* inferior.c: Fix indentation.
* infrun.c: Fix indentation.
* iq2000-tdep.c: Fix indentation.
* language.c: Fix indentation.
* linespec.c: Fix indentation.
* linux-fork.c: Fix indentation.
* linux-nat.c: Fix indentation.
* linux-tdep.c: Fix indentation.
* linux-thread-db.c: Fix indentation.
* lm32-tdep.c: Fix indentation.
* m2-lang.c: Fix indentation.
* m2-typeprint.c: Fix indentation.
* m2-valprint.c: Fix indentation.
* m32c-tdep.c: Fix indentation.
* m32r-linux-tdep.c: Fix indentation.
* m32r-tdep.c: Fix indentation.
* m68hc11-tdep.c: Fix indentation.
* m68k-bsd-nat.c: Fix indentation.
* m68k-linux-nat.c: Fix indentation.
* m68k-linux-tdep.c: Fix indentation.
* m68k-tdep.c: Fix indentation.
* machoread.c: Fix indentation.
* macrocmd.c: Fix indentation.
* macroexp.c: Fix indentation.
* macroscope.c: Fix indentation.
* macrotab.c: Fix indentation.
* macrotab.h: Fix indentation.
* main.c: Fix indentation.
* mdebugread.c: Fix indentation.
* mep-tdep.c: Fix indentation.
* mi/mi-cmd-catch.c: Fix indentation.
* mi/mi-cmd-disas.c: Fix indentation.
* mi/mi-cmd-env.c: Fix indentation.
* mi/mi-cmd-stack.c: Fix indentation.
* mi/mi-cmd-var.c: Fix indentation.
* mi/mi-cmds.c: Fix indentation.
* mi/mi-main.c: Fix indentation.
* mi/mi-parse.c: Fix indentation.
* microblaze-tdep.c: Fix indentation.
* minidebug.c: Fix indentation.
* minsyms.c: Fix indentation.
* mips-linux-nat.c: Fix indentation.
* mips-linux-tdep.c: Fix indentation.
* mips-nbsd-tdep.c: Fix indentation.
* mips-tdep.c: Fix indentation.
* mn10300-linux-tdep.c: Fix indentation.
* mn10300-tdep.c: Fix indentation.
* moxie-tdep.c: Fix indentation.
* msp430-tdep.c: Fix indentation.
* namespace.h: Fix indentation.
* nat/fork-inferior.c: Fix indentation.
* nat/gdb_ptrace.h: Fix indentation.
* nat/linux-namespaces.c: Fix indentation.
* nat/linux-osdata.c: Fix indentation.
* nat/netbsd-nat.c: Fix indentation.
* nat/x86-dregs.c: Fix indentation.
* nbsd-nat.c: Fix indentation.
* nbsd-tdep.c: Fix indentation.
* nios2-linux-tdep.c: Fix indentation.
* nios2-tdep.c: Fix indentation.
* nto-procfs.c: Fix indentation.
* nto-tdep.c: Fix indentation.
* objfiles.c: Fix indentation.
* objfiles.h: Fix indentation.
* opencl-lang.c: Fix indentation.
* or1k-tdep.c: Fix indentation.
* osabi.c: Fix indentation.
* osabi.h: Fix indentation.
* osdata.c: Fix indentation.
* p-lang.c: Fix indentation.
* p-typeprint.c: Fix indentation.
* p-valprint.c: Fix indentation.
* parse.c: Fix indentation.
* ppc-linux-nat.c: Fix indentation.
* ppc-linux-tdep.c: Fix indentation.
* ppc-nbsd-nat.c: Fix indentation.
* ppc-nbsd-tdep.c: Fix indentation.
* ppc-obsd-nat.c: Fix indentation.
* ppc-ravenscar-thread.c: Fix indentation.
* ppc-sysv-tdep.c: Fix indentation.
* ppc64-tdep.c: Fix indentation.
* printcmd.c: Fix indentation.
* proc-api.c: Fix indentation.
* producer.c: Fix indentation.
* producer.h: Fix indentation.
* prologue-value.c: Fix indentation.
* prologue-value.h: Fix indentation.
* psymtab.c: Fix indentation.
* python/py-arch.c: Fix indentation.
* python/py-bpevent.c: Fix indentation.
* python/py-event.c: Fix indentation.
* python/py-event.h: Fix indentation.
* python/py-finishbreakpoint.c: Fix indentation.
* python/py-frame.c: Fix indentation.
* python/py-framefilter.c: Fix indentation.
* python/py-inferior.c: Fix indentation.
* python/py-infthread.c: Fix indentation.
* python/py-objfile.c: Fix indentation.
* python/py-prettyprint.c: Fix indentation.
* python/py-registers.c: Fix indentation.
* python/py-signalevent.c: Fix indentation.
* python/py-stopevent.c: Fix indentation.
* python/py-stopevent.h: Fix indentation.
* python/py-threadevent.c: Fix indentation.
* python/py-tui.c: Fix indentation.
* python/py-unwind.c: Fix indentation.
* python/py-value.c: Fix indentation.
* python/py-xmethods.c: Fix indentation.
* python/python-internal.h: Fix indentation.
* python/python.c: Fix indentation.
* ravenscar-thread.c: Fix indentation.
* record-btrace.c: Fix indentation.
* record-full.c: Fix indentation.
* record.c: Fix indentation.
* reggroups.c: Fix indentation.
* regset.h: Fix indentation.
* remote-fileio.c: Fix indentation.
* remote.c: Fix indentation.
* reverse.c: Fix indentation.
* riscv-linux-tdep.c: Fix indentation.
* riscv-ravenscar-thread.c: Fix indentation.
* riscv-tdep.c: Fix indentation.
* rl78-tdep.c: Fix indentation.
* rs6000-aix-tdep.c: Fix indentation.
* rs6000-lynx178-tdep.c: Fix indentation.
* rs6000-nat.c: Fix indentation.
* rs6000-tdep.c: Fix indentation.
* rust-lang.c: Fix indentation.
* rx-tdep.c: Fix indentation.
* s12z-tdep.c: Fix indentation.
* s390-linux-tdep.c: Fix indentation.
* score-tdep.c: Fix indentation.
* ser-base.c: Fix indentation.
* ser-mingw.c: Fix indentation.
* ser-uds.c: Fix indentation.
* ser-unix.c: Fix indentation.
* serial.c: Fix indentation.
* sh-linux-tdep.c: Fix indentation.
* sh-nbsd-tdep.c: Fix indentation.
* sh-tdep.c: Fix indentation.
* skip.c: Fix indentation.
* sol-thread.c: Fix indentation.
* solib-aix.c: Fix indentation.
* solib-darwin.c: Fix indentation.
* solib-frv.c: Fix indentation.
* solib-svr4.c: Fix indentation.
* solib.c: Fix indentation.
* source.c: Fix indentation.
* sparc-linux-tdep.c: Fix indentation.
* sparc-nbsd-tdep.c: Fix indentation.
* sparc-obsd-tdep.c: Fix indentation.
* sparc-ravenscar-thread.c: Fix indentation.
* sparc-tdep.c: Fix indentation.
* sparc64-linux-tdep.c: Fix indentation.
* sparc64-nbsd-tdep.c: Fix indentation.
* sparc64-obsd-tdep.c: Fix indentation.
* sparc64-tdep.c: Fix indentation.
* stabsread.c: Fix indentation.
* stack.c: Fix indentation.
* stap-probe.c: Fix indentation.
* stubs/ia64vms-stub.c: Fix indentation.
* stubs/m32r-stub.c: Fix indentation.
* stubs/m68k-stub.c: Fix indentation.
* stubs/sh-stub.c: Fix indentation.
* stubs/sparc-stub.c: Fix indentation.
* symfile-mem.c: Fix indentation.
* symfile.c: Fix indentation.
* symfile.h: Fix indentation.
* symmisc.c: Fix indentation.
* symtab.c: Fix indentation.
* symtab.h: Fix indentation.
* target-float.c: Fix indentation.
* target.c: Fix indentation.
* target.h: Fix indentation.
* tic6x-tdep.c: Fix indentation.
* tilegx-linux-tdep.c: Fix indentation.
* tilegx-tdep.c: Fix indentation.
* top.c: Fix indentation.
* tracefile-tfile.c: Fix indentation.
* tracepoint.c: Fix indentation.
* tui/tui-disasm.c: Fix indentation.
* tui/tui-io.c: Fix indentation.
* tui/tui-regs.c: Fix indentation.
* tui/tui-stack.c: Fix indentation.
* tui/tui-win.c: Fix indentation.
* tui/tui-winsource.c: Fix indentation.
* tui/tui.c: Fix indentation.
* typeprint.c: Fix indentation.
* ui-out.h: Fix indentation.
* unittests/copy_bitwise-selftests.c: Fix indentation.
* unittests/memory-map-selftests.c: Fix indentation.
* utils.c: Fix indentation.
* v850-tdep.c: Fix indentation.
* valarith.c: Fix indentation.
* valops.c: Fix indentation.
* valprint.c: Fix indentation.
* valprint.h: Fix indentation.
* value.c: Fix indentation.
* value.h: Fix indentation.
* varobj.c: Fix indentation.
* vax-tdep.c: Fix indentation.
* windows-nat.c: Fix indentation.
* windows-tdep.c: Fix indentation.
* xcoffread.c: Fix indentation.
* xml-syscall.c: Fix indentation.
* xml-tdesc.c: Fix indentation.
* xstormy16-tdep.c: Fix indentation.
* xtensa-config.c: Fix indentation.
* xtensa-linux-nat.c: Fix indentation.
* xtensa-linux-tdep.c: Fix indentation.
* xtensa-tdep.c: Fix indentation.
gdbserver/ChangeLog:
* ax.cc: Fix indentation.
* dll.cc: Fix indentation.
* inferiors.h: Fix indentation.
* linux-low.cc: Fix indentation.
* linux-nios2-low.cc: Fix indentation.
* linux-ppc-ipa.cc: Fix indentation.
* linux-ppc-low.cc: Fix indentation.
* linux-x86-low.cc: Fix indentation.
* linux-xtensa-low.cc: Fix indentation.
* regcache.cc: Fix indentation.
* server.cc: Fix indentation.
* tracepoint.cc: Fix indentation.
gdbsupport/ChangeLog:
* common-exceptions.h: Fix indentation.
* event-loop.cc: Fix indentation.
* fileio.cc: Fix indentation.
* filestuff.cc: Fix indentation.
* gdb-dlfcn.cc: Fix indentation.
* gdb_string_view.h: Fix indentation.
* job-control.cc: Fix indentation.
* signals.cc: Fix indentation.
Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
|
|
The implementation is in valprint.c, so the declaration belongs in
valprint.h.
gdb/ChangeLog:
* value.h (valprint_check_validity): Move declaration from
here...
* valprint.h (valprint_check_validity): ... to here.
Change-Id: Ibe577d3696720099e6d79888d4ee8e3c1bf05a26
|
|
We can finally remove val_print and various helper functions that are
no longer needed.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* value.h (val_print): Don't declare.
* valprint.h (val_print_array_elements)
(val_print_scalar_formatted, generic_val_print): Don't declare.
* valprint.c (generic_val_print_array): Take a struct value.
(generic_val_print_ptr, generic_val_print_memberptr)
(generic_val_print_bool, generic_val_print_int)
(generic_val_print_char, generic_val_print_complex)
(generic_val_print): Remove.
(generic_value_print): Update.
(do_val_print): Remove unused parameters. Don't call
la_val_print.
(val_print): Remove.
(common_val_print): Update. Don't call value_check_printable.
(val_print_scalar_formatted, val_print_array_elements): Remove.
* rust-lang.c (rust_val_print): Remove.
(rust_language_defn): Update.
* p-valprint.c (pascal_val_print): Remove.
(pascal_value_print_inner): Update.
(pascal_object_print_val_fields, pascal_object_print_val):
Remove.
(pascal_object_print_static_field): Update.
* p-lang.h (pascal_val_print): Don't declare.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* m2-valprint.c (m2_print_unbounded_array, m2_val_print): Remove.
* m2-lang.h (m2_val_print): Don't declare.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn) <la_val_print>: Remove.
* language.c (unk_lang_value_print_inner): Rename. Change
argument types.
(unknown_language_defn, auto_language_defn): Update.
* go-valprint.c (go_val_print): Remove.
* go-lang.h (go_val_print): Don't declare.
* go-lang.c (go_language_defn): Update.
* f-valprint.c (f_val_print): Remove.
* f-lang.h (f_value_print): Don't declare.
* f-lang.c (f_language_defn): Update.
* d-valprint.c (d_val_print): Remove.
* d-lang.h (d_value_print): Don't declare.
* d-lang.c (d_language_defn): Update.
* cp-valprint.c (cp_print_value_fields)
(cp_print_value_fields_rtti, cp_print_value): Remove.
(cp_print_static_field): Update.
* c-valprint.c (c_val_print_array, c_val_print_ptr)
(c_val_print_struct, c_val_print_union, c_val_print_int)
(c_val_print_memberptr, c_val_print): Remove.
* c-lang.h (c_val_print_array, cp_print_value_fields)
(cp_print_value_fields_rtti): Don't declare.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* ada-valprint.c (ada_val_print_ptr, ada_val_print_num): Remove.
(ada_val_print_enum): Take a struct value.
(ada_val_print_flt, ada_val_print_array, ada_val_print_1)
(ada_val_print): Remove.
(ada_value_print_1): Update.
(printable_val_type): Remove.
* ada-lang.h (ada_val_print): Don't declare.
* ada-lang.c (ada_language_defn): Update.
|
|
This introduces value_print_array_elements, which is an analogue of
val_print_array_elements that uses the value API.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (value_print_array_elements): New function.
* valprint.h (value_print_array_elements): Declare.
|
|
This introduces a value_print_scalar_formatted, which is an analogue
of val_print_scalar_formatted that uses the value API.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.h (value_print_scalar_formatted): Declare.
* valprint.c (value_print_scalar_formatted): New function.
|
|
This introduces generic_value_print, which is a value-based analogue
to generic_val_print. For now this is unused and simply calls
generic_val_print, but subsequent patches will both change this
function to work using the value API directly, and convert callers of
generic_val_print to call this instead.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.h (generic_value_print): Declare.
* valprint.c (generic_value_print): New function.
|
|
A (much) later patch will remove the call to value_check_printable
from common_val_print. This will needed to preserve some details of
how optimized-out structures are printed.
However, doing this will also break dw2-op-out-param.exp. Making the
change causes "bt" to print:
However, the test wants to see:
... operand2=<optimized out>
That is, a wholly-optimized out structure should not print its fields.
So, this patch introduces a new common_val_print_checked, which calls
value_check_printable first, and then arranges to use it in the one
spot that affects the test suite.
I was not completely sure if it would be preferable to change the
test. However, I reasoned that, assuming this output was intentional
in the first place, in a backtrace space is at a premium and so this
is a reasonable approach. In other spots calling common_val_print,
this behavior is probably unintended, or at least a "don't care".
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.h (common_val_print_checked): Declare.
* valprint.c (common_val_print_checked): New function.
* stack.c (print_frame_arg): Use common_val_print_checked.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
Fix typos in comments. NFC.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-10-26 Tom de Vries <tdevries@suse.de>
* aarch64-linux-tdep.c: Fix typos in comments.
* aarch64-tdep.c: Same.
* ada-lang.c: Same.
* amd64-nat.c: Same.
* arc-tdep.c: Same.
* arch/aarch64-insn.c: Same.
* block.c: Same.
* breakpoint.h: Same.
* btrace.h: Same.
* c-varobj.c: Same.
* cli/cli-decode.c: Same.
* cli/cli-script.c: Same.
* cli/cli-utils.h: Same.
* coff-pe-read.c: Same.
* coffread.c: Same.
* compile/compile-cplus-symbols.c: Same.
* compile/compile-object-run.c: Same.
* completer.c: Same.
* corelow.c: Same.
* cp-support.c: Same.
* demangle.c: Same.
* dwarf-index-write.c: Same.
* dwarf2-frame.c: Same.
* dwarf2-frame.h: Same.
* eval.c: Same.
* frame-base.h: Same.
* frame.h: Same.
* gdbcmd.h: Same.
* gdbtypes.h: Same.
* gnu-nat.c: Same.
* guile/scm-objfile.c: Same.
* i386-tdep.c: Same.
* i386-tdep.h: Same.
* infcall.c: Same.
* infcall.h: Same.
* linux-nat.c: Same.
* m68k-tdep.c: Same.
* macroexp.c: Same.
* memattr.c: Same.
* mi/mi-cmd-disas.c: Same.
* mi/mi-getopt.h: Same.
* mi/mi-main.c: Same.
* minsyms.c: Same.
* nat/aarch64-sve-linux-sigcontext.h: Same.
* objfiles.h: Same.
* ppc-linux-nat.c: Same.
* ppc-linux-tdep.c: Same.
* ppc-tdep.h: Same.
* progspace.h: Same.
* prologue-value.h: Same.
* python/py-evtregistry.c: Same.
* python/py-instruction.h: Same.
* record-btrace.c: Same.
* record-full.c: Same.
* remote.c: Same.
* rs6000-tdep.c: Same.
* ser-tcp.c: Same.
* sol-thread.c: Same.
* sparc-sol2-tdep.c: Same.
* sparc64-tdep.c: Same.
* stabsread.c: Same.
* symfile.c: Same.
* symtab.h: Same.
* target.c: Same.
* tracepoint.c: Same.
* tui/tui-data.h: Same.
* tui/tui-io.c: Same.
* tui/tui-win.c: Same.
* tui/tui.c: Same.
* unittests/rsp-low-selftests.c: Same.
* user-regs.h: Same.
* utils.c: Same.
* utils.h: Same.
* valarith.c: Same.
* valops.c: Same.
* valprint.c: Same.
* valprint.h: Same.
* value.c: Same.
* value.h: Same.
* varobj.c: Same.
* x86-nat.h: Same.
* xtensa-tdep.c: Same.
gdb/gdbserver/ChangeLog:
2019-10-26 Tom de Vries <tdevries@suse.de>
* linux-aarch64-low.c: Fix typos in comments.
* linux-arm-low.c: Same.
* linux-low.c: Same.
* linux-ppc-low.c: Same.
* proc-service.c: Same.
* regcache.h: Same.
* server.c: Same.
* tracepoint.c: Same.
* win32-low.c: Same.
gdb/stubs/ChangeLog:
2019-10-26 Tom de Vries <tdevries@suse.de>
* ia64vms-stub.c: Fix typos in comments.
* m32r-stub.c: Same.
* m68k-stub.c: Same.
* sh-stub.c: Same.
gdb/testsuite/ChangeLog:
2019-10-26 Tom de Vries <tdevries@suse.de>
* gdb.base/bigcore.c: Fix typos in comments.
* gdb.base/ctf-ptype.c: Same.
* gdb.base/long_long.c: Same.
* gdb.dwarf2/dw2-op-out-param.S: Same.
* gdb.python/py-evthreads.c: Same.
* gdb.reverse/i387-stack-reverse.c: Same.
* gdb.trace/tfile.c: Same.
* lib/compiler.c: Same.
* lib/compiler.cc: Same.
Change-Id: I8573d84a577894270179ae30f46c48d806fc1beb
|
|
This is for add_setshow_boolean_cmd as well as the gdb::option interface.
gdb/ChangeLog:
2019-09-17 Christian Biesinger <cbiesinger@google.com>
* ada-lang.c (ada_ignore_descriptive_types_p): Change to bool.
(print_signatures): Likewise.
(trust_pad_over_xvs): Likewise.
* arch/aarch64-insn.c (aarch64_debug): Likewise.
* arch/aarch64-insn.h (aarch64_debug): Likewise.
* arm-linux-nat.c (arm_apcs_32): Likewise.
* arm-linux-tdep.c (arm_apcs_32): Likewise.
* arm-nbsd-nat.c (arm_apcs_32): Likewise.
* arm-tdep.c (arm_debug): Likewise.
(arm_apcs_32): Likewise.
* auto-load.c (debug_auto_load): Likewise.
(auto_load_gdb_scripts): Likewise.
(global_auto_load): Likewise.
(auto_load_local_gdbinit): Likewise.
(auto_load_local_gdbinit_loaded): Likewise.
* auto-load.h (global_auto_load): Likewise.
(auto_load_local_gdbinit): Likewise.
(auto_load_local_gdbinit_loaded): Likewise.
* breakpoint.c (disconnected_dprintf): Likewise.
(breakpoint_proceeded): Likewise.
(automatic_hardware_breakpoints): Likewise.
(always_inserted_mode): Likewise.
(target_exact_watchpoints): Likewise.
(_initialize_breakpoint): Update.
* breakpoint.h (target_exact_watchpoints): Change to bool.
* btrace.c (maint_btrace_pt_skip_pad): Likewise.
* cli/cli-cmds.c (trace_commands): Likewise.
* cli/cli-cmds.h (trace_commands): Likewise.
* cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument
to bool*.
* cli/cli-logging.c (logging_overwrite): Change to bool.
(logging_redirect): Likewise.
(debug_redirect): Likewise.
* cli/cli-option.h (option_def) <boolean>: Change return type to bool*.
(struct boolean_option_def) <get_var_address_cb_>: Change return type
to bool.
<boolean_option_def>: Update.
(struct flag_option_def): Change default type of Context to bool
from int.
<flag_option_def>: Change return type of var_address_cb_ to bool*.
* cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*.
(get_setshow_command_value_string): Likewise.
* cli/cli-style.c (cli_styling): Change to bool.
(source_styling): Likewise.
* cli/cli-style.h (source_styling): Likewise.
(cli_styling): Likewise.
* cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change
to bool.
* command.h (var_types): Update comment.
(add_setshow_boolean_cmd): Change int* var argument to bool*.
* compile/compile-cplus-types.c (debug_compile_cplus_types): Change to
bool.
(debug_compile_cplus_scopes): Likewise.
* compile/compile-internal.h (compile_debug): Likewise.
* compile/compile.c (compile_debug): Likewise.
(struct compile_options) <raw>: Likewise.
* cp-support.c (catch_demangler_crashes): Likewise.
* cris-tdep.c (usr_cmd_cris_version_valid): Likewise.
(usr_cmd_cris_dwarf2_cfi): Likewise.
* csky-tdep.c (csky_debug): Likewise.
* darwin-nat.c (enable_mach_exceptions): Likewise.
* dcache.c (dcache_enabled_p): Likewise.
* defs.h (info_verbose): Likewise.
* demangle.c (demangle): Likewise.
(asm_demangle): Likewise.
* dwarf-index-cache.c (debug_index_cache): Likewise.
* dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise.
* dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise.
* dwarf2read.c (check_physname): Likewise.
(use_deprecated_index_sections): Likewise.
(dwarf_always_disassemble): Likewise.
* eval.c (overload_resolution): Likewise.
* event-top.c (set_editing_cmd_var): Likewise.
(exec_done_display_p): Likewise.
* event-top.h (set_editing_cmd_var): Likewise.
(exec_done_display_p): Likewise.
* exec.c (write_files): Likewise.
* fbsd-nat.c (debug_fbsd_lwp): Likewise
(debug_fbsd_nat): Likewise.
* frame.h (struct frame_print_options) <print_raw_frame_arguments>:
Likewise.
(struct set_backtrace_options) <backtrace_past_main>: Likewise.
<backtrace_past_entry> Likewise.
* gdb-demangle.h (demangle): Likewise.
(asm_demangle): Likewise.
* gdb_bfd.c (bfd_sharing): Likewise.
* gdbcore.h (write_files): Likewise.
* gdbsupport/common-debug.c (show_debug_regs): Likewise.
* gdbsupport/common-debug.h (show_debug_regs): Likewise.
* gdbthread.h (print_thread_events): Likewise.
* gdbtypes.c (opaque_type_resolution): Likewise.
(strict_type_checking): Likewise.
* gnu-nat.c (gnu_debug_flag): Likewise.
* guile/scm-auto-load.c (auto_load_guile_scripts): Likewise.
* guile/scm-param.c (pascm_variable): Add boolval.
(add_setshow_generic): Update.
(pascm_param_value): Update.
(pascm_set_param_value_x): Update.
* hppa-tdep.c (hppa_debug): Change to bool..
* infcall.c (may_call_functions_p): Likewise.
(coerce_float_to_double_p): Likewise.
(unwind_on_signal_p): Likewise.
(unwind_on_terminating_exception_p): Likewise.
* infcmd.c (startup_with_shell): Likewise.
* inferior.c (print_inferior_events): Likewise.
* inferior.h (startup_with_shell): Likewise.
(print_inferior_events): Likewise.
* infrun.c (step_stop_if_no_debug): Likewise.
(detach_fork): Likewise.
(debug_displaced): Likewise.
(disable_randomization): Likewise.
(non_stop): Likewise.
(non_stop_1): Likewise.
(observer_mode): Likewise.
(observer_mode_1): Likewise.
(set_observer_mode): Update.
(sched_multi): Change to bool.
* infrun.h (debug_displaced): Likewise.
(sched_multi): Likewise.
(step_stop_if_no_debug): Likewise.
(non_stop): Likewise.
(disable_randomization): Likewise.
* linux-tdep.c (use_coredump_filter): Likewise.
(dump_excluded_mappings): Likewise.
* linux-thread-db.c (auto_load_thread_db): Likewise.
(check_thread_db_on_load): Likewise.
* main.c (captured_main_1): Update.
* maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt,
xx2_opt, boolean_opt>: Change to bool.
* maint-test-settings.c (maintenance_test_settings_boolean): Likewise.
* maint.c (maintenance_profile_p): Likewise.
(per_command_time): Likewise.
(per_command_space): Likewise.
(per_command_symtab): Likewise.
* memattr.c (inaccessible_by_default): Likewise.
* mi/mi-main.c (mi_async): Likewise.
(mi_async_1): Likewise.
* mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise.
* nat/fork-inferior.h (startup_with_shell): Likewise.
* nat/linux-namespaces.c (debug_linux_namespaces): Likewise.
* nat/linux-namespaces.h (debug_linux_namespaces): Likewise.
* nios2-tdep.c (nios2_debug): Likewise.
* or1k-tdep.c (or1k_debug): Likewise.
* parse.c (parser_debug): Likewise.
* parser-defs.h (parser_debug): Likewise.
* printcmd.c (print_symbol_filename): Likewise.
* proc-api.c (procfs_trace): Likewise.
* python/py-auto-load.c (auto_load_python_scripts): Likewise.
* python/py-param.c (union parmpy_variable): Add "bool boolval" field.
(set_parameter_value): Update.
(add_setshow_generic): Update.
* python/py-value.c (copy_py_bool_obj): Change argument from int*
to bool*.
* python/python.c (gdbpy_parameter_value): Cast to bool* instead of
int*.
* ravenscar-thread.c (ravenscar_task_support): Change to bool.
* record-btrace.c (record_btrace_target::store_registers): Update.
* record-full.c (record_full_memory_query): Change to bool.
(record_full_stop_at_limit): Likewise.
* record-full.h (record_full_memory_query): Likewise.
* remote-notif.c (notif_debug): Likewise.
* remote-notif.h (notif_debug): Likewise.
* remote.c (use_range_stepping): Likewise.
(interrupt_on_connect): Likewise.
(remote_break): Likewise.
* ser-tcp.c (tcp_auto_retry): Likewise.
* ser-unix.c (serial_hwflow): Likewise.
* skip.c (debug_skip): Likewise.
* solib-aix.c (solib_aix_debug): Likewise.
* spu-tdep.c (spu_stop_on_load_p): Likewise.
(spu_auto_flush_cache_p): Likewise.
* stack.c (struct backtrace_cmd_options) <full, no_filters, hide>:
Likewise.
(struct info_print_options) <quiet>: Likewise.
* symfile-debug.c (debug_symfile): Likewise.
* symfile.c (auto_solib_add): Likewise.
(separate_debug_file_debug): Likewise.
* symfile.h (auto_solib_add): Likewise.
(separate_debug_file_debug): Likewise.
* symtab.c (basenames_may_differ): Likewise.
(struct filename_partial_match_opts) <dirname, basename>: Likewise.
(struct info_print_options) <quiet, exclude_minsyms>: Likewise.
(struct info_types_options) <quiet>: Likewise.
* symtab.h (demangle): Likewise.
(basenames_may_differ): Likewise.
* target-dcache.c (stack_cache_enabled_1): Likewise.
(code_cache_enabled_1): Likewise.
* target.c (trust_readonly): Likewise.
(may_write_registers): Likewise.
(may_write_memory): Likewise.
(may_insert_breakpoints): Likewise.
(may_insert_tracepoints): Likewise.
(may_insert_fast_tracepoints): Likewise.
(may_stop): Likewise.
(auto_connect_native_target): Likewise.
(target_stop_and_wait): Update.
(target_async_permitted): Change to bool.
(target_async_permitted_1): Likewise.
(may_write_registers_1): Likewise.
(may_write_memory_1): Likewise.
(may_insert_breakpoints_1): Likewise.
(may_insert_tracepoints_1): Likewise.
(may_insert_fast_tracepoints_1): Likewise.
(may_stop_1): Likewise.
* target.h (target_async_permitted): Likewise.
(may_write_registers): Likewise.
(may_write_memory): Likewise.
(may_insert_breakpoints): Likewise.
(may_insert_tracepoints): Likewise.
(may_insert_fast_tracepoints): Likewise.
(may_stop): Likewise.
* thread.c (struct info_threads_opts) <show_global_ids>: Likewise.
(make_thread_apply_all_options_def_group): Change argument from int*
to bool*.
(thread_apply_all_command): Update.
(print_thread_events): Change to bool.
* top.c (confirm): Likewise.
(command_editing_p): Likewise.
(history_expansion_p): Likewise.
(write_history_p): Likewise.
(info_verbose): Likewise.
* top.h (confirm): Likewise.
(history_expansion_p): Likewise.
* tracepoint.c (disconnected_tracing): Likewise.
(circular_trace_buffer): Likewise.
* typeprint.c (print_methods): Likewise.
(print_typedefs): Likewise.
* utils.c (debug_timestamp): Likewise.
(sevenbit_strings): Likewise.
(pagination_enabled): Likewise.
* utils.h (sevenbit_strings): Likewise.
(pagination_enabled): Likewise.
* valops.c (overload_resolution): Likewise.
* valprint.h (struct value_print_options) <prettyformat_arrays,
prettyformat_structs, vtblprint, unionprint, addressprint, objectprint,
stop_print_at_null, print_array_indexes, deref_ref, static_field_print,
pascal_static_field_print, raw, summary, symbol_print, finish_print>:
Likewise.
* windows-nat.c (new_console): Likewise.
(cygwin_exceptions): Likewise.
(new_group): Likewise.
(debug_exec): Likewise.
(debug_events): Likewise.
(debug_memory): Likewise.
(debug_exceptions): Likewise.
(useshell): Likewise.
* windows-tdep.c (maint_display_all_tib): Likewise.
* xml-support.c (debug_xml): Likewise.
|
|
build_address_symbolic contains some code which causes it to
prefer the minsym over the the function symbol in certain cases.
The cases where this occurs are the same as the "certain pathological
cases" that used to exist in find_frame_funname().
This commit largely disables that code; it will only prefer the
minsym when the address of minsym is identical to that of the address
under consideration AND the function address for the symbtab sym is
not the same as the address under consideration.
So, without this change, when using the dw2-ranges-func-lo-cold
executable from the gdb.dwarf2/dw2-ranges-func.exp test, GDB exhibits
the following behavior:
(gdb) x/5i foo_cold
0x40110d <foo+4294967277>: push %rbp
0x40110e <foo+4294967278>: mov %rsp,%rbp
0x401111 <foo+4294967281>: callq 0x401106 <baz>
0x401116 <foo+4294967286>: nop
0x401117 <foo+4294967287>: pop %rbp
On the other hand, still without this change, using the
dw2-ranges-func-hi-cold executable from the same test, GDB
does this instead:
(gdb) x/5i foo_cold
0x401128 <foo_cold>: push %rbp
0x401129 <foo_cold+1>: mov %rsp,%rbp
0x40112c <foo_cold+4>: callq 0x401134 <baz>
0x401131 <foo_cold+9>: nop
0x401132 <foo_cold+10>: pop %rbp
This is inconsistent behavior. When foo_cold is at a lower
address than the function's entry point, the symtab symbol (foo)
is displayed along with a large positive offset which would wrap
around the address space if the address space were only 32 bits wide.
(A later patch fixes this problem by displaying negative offsets.)
This commit makes the behavior uniform for both the "lo-cold" and
"hi-cold" cases:
lo-cold:
(gdb) x/5i foo_cold
0x40110d <foo_cold>: push %rbp
0x40110e <foo-18>: mov %rsp,%rbp
0x401111 <foo-15>: callq 0x401106 <baz>
0x401116 <foo-10>: nop
0x401117 <foo-9>: pop %rbp
hi-cold:
(gdb) x/5i foo_cold
0x401128 <foo_cold>: push %rbp
0x401129 <foo+35>: mov %rsp,%rbp
0x40112c <foo+38>: callq 0x401134 <baz>
0x401131 <foo+43>: nop
0x401132 <foo+44>: pop %rbp
In both cases, the symbol shown for the address at which foo_cold
resides is shown as <foo_cold>. Subsequent offsets are shown as
either negative or positive offsets from the entry pc for foo.
When disassembling a function, care must be taken to NOT display
<+0> as the offset for the second range. For this reason, I found
it necessary to add the "prefer_sym_over_minsym" parameter to
build_address_symbolic. The type of this flag is a bool; do_demangle
ought to be a bool also, so I made this change at the same time.
gdb/ChangeLog:
* valprint.h (build_address_symbolic): Add "prefer_sym_over_minsym"
parameter. Change type of "do_demangle" to bool.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Pass suitable "prefer_sym_over_minsym" flag to
build_address_symbolic(). Don't output "+" for negative offsets.
* printcmd.c (print_address_symbolic): Update invocation of
build_address_symbolic to include a "prefer_sym_over_minsym"
flag.
(build_address_symbolic): Add "prefer_sym_over_minsym" parameter.
Restrict cases in which use of minimal symbol is preferred to that
of a found symbol. Update comments.
|
|
This patch adds support for "print -option optval --", etc.
Likewise for "compile print".
We'll get:
~~~~~~
(gdb) help print
Print value of expression EXP.
Usage: print [[OPTION]... --] [/FMT] [EXP]
Options:
-address [on|off]
Set printing of addresses.
-array [on|off]
Set pretty formatting of arrays.
-array-indexes [on|off]
Set printing of array indexes.
-elements NUMBER|unlimited
Set limit on string chars or array elements to print.
"unlimited" causes there to be no limit.
-max-depth NUMBER|unlimited
Set maximum print depth for nested structures, unions and arrays.
When structures, unions, or arrays are nested beyond this depth then they
will be replaced with either '{...}' or '(...)' depending on the language.
Use "unlimited" to print the complete structure.
-null-stop [on|off]
Set printing of char arrays to stop at first null char.
-object [on|off]
Set printing of C++ virtual function tables.
-pretty [on|off]
Set pretty formatting of structures.
-repeats NUMBER|unlimited
Set threshold for repeated print elements.
"unlimited" causes all elements to be individually printed.
-static-members [on|off]
Set printing of C++ static members.
-symbol [on|off]
Set printing of symbol names when printing pointers.
-union [on|off]
Set printing of unions interior to structures.
-vtbl [on|off]
Set printing of C++ virtual function tables.
Note: because this command accepts arbitrary expressions, if you
specify any command option, you must use a double dash ("--")
to mark the end of option processing. E.g.: "print -o -- myobj".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I want to highlight the comment above about "--".
At first, I thought we could make the print command parse the options,
and if the option wasn't recognized, fallback to parsing as an
expression. Then, if the user wanted to disambiguate, he'd use the
"--" option delimiter. For example, if you had a variable called
"object" and you wanted to print its negative, you'd have to do:
(gdb) print -- -object
After getting that working, I saw that gdb.pascal/floats.exp
regressed, in these tests:
gdb_test "print -r" " = -1\\.2(499.*|5|500.*)"
gdb_test "print -(r)" " = -1.2(499.*|5|500.*)"
gdb_test "print -(r + s)" " = -3\\.4(499.*|5|500.*)"
It's the first one that I found most concerning. It regressed because
"-r" is the abbreviation of "-raw". I realized then that the behavior
change was a bit risker than I'd like, considering scripts, wrappers
around gdb, etc., and even user expectation. So instead, I made the
print command _require_ the "--" options delimiter if you want to
specify any option. So:
(gdb) print -r
is parsed as an expression, and
(gdb) print -r --
is parsed as an option.
I noticed that that's also what lldb's expr (the equivalent of print)
does to handle the same problem.
Going back the options themselves, note that:
- you can shorten option names, as long as unambiguous.
- For boolean options, 0/1 stand for off/on.
- For boolean options, "true" is implied.
So these are all equivalent:
(gdb) print -object on -static-members off -pretty on -- foo
(gdb) print -object -static-members off -pretty -- foo
(gdb) print -object -static-members 0 -pretty -- foo
(gdb) print -o -st 0 -p -- foo
TAB completion is fully supported:
(gdb) p -[TAB]
-address -elements -pretty -symbol
-array -null-stop -repeats -union
-array-indexes -object -static-members -vtbl
Note that the code is organized such that some of the options and the
"set/show" commands code is shared. In particular, the "print"
options and the corresponding "set print" commands are defined with
the same structures. The commands are installed with the
gdb::option::add_setshow_cmds_for_options function.
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* compile/compile.c: Include "cli/cli-option.h".
(compile_print_value): Scope data pointer is now a
value_print_options pointer; adjust.
(compile_print_command): Process options. Scope data pointer is
now a value_print_options pointer; adjust.
(_initialize_compile): Update "compile print"'s help to include
supported options. Install a completer for "compile print".
* cp-valprint.c (show_vtblprint, show_objectprint)
(show_static_field_print): Delete.
(_initialize_cp_valprint): Don't install "set print
static-members", "set print vtbl", "set print object" here.
* printcmd.c: Include "cli/cli-option.h" and
"common/gdb_optional.h".
(print_command_parse_format): Rework to fill in a
value_print_options instead of a format_data.
(print_value): Change parameter type from format_data pointer to
value_print_options reference. Adjust.
(print_command_1): Process options. Adjust to pass down a
value_print_options.
(print_command_completer): New.
(_initialize_printcmd): Install print_command_completer as
handle_brkchars completer for the "print" command. Update
"print"'s help to include supported options.
* valprint.c: Include "cli/cli-option.h".
(show_vtblprint, show_objectprint, show_static_field_print): Moved
here from cp-valprint.c.
(boolean_option_def, uinteger_option_def)
(value_print_option_defs, make_value_print_options_def_group):
New. Use gdb::option::add_setshow_cmds_for_options to install
"set print elements", "set print null-stop", "set print repeats",
"set print pretty", "set print union", "set print array", "set
print address", "set print symbol", "set print array-indexes".
* valprint.h: Include <string> and "cli/cli-option.h".
(make_value_print_options_def_group): Declare.
(print_value): Change parameter type from format_data pointer to
value_print_options reference.
(print_command_completer): Declare.
gdb/testsuite/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* gdb.base/options.exp: Build executable.
(test-print): New procedure.
(top level): Call it, once for "print" and another for "compile
print".
|
|
A user wanted to be able to disable the display of the value when
using "finish" -- but still have the value entered into the value
history in case it was useful later on. Part of the rationale here is
that sometimes the value might be quite large, or expensive to display
(in their case this was compounded by a rogue pretty-printer).
This patch implements this idea.
gdb/ChangeLog
2019-05-29 Tom Tromey <tromey@adacore.com>
* NEWS: Add entry.
* infcmd.c (print_return_value_1): Handle finish_print
option.
(show_print_finish): New function.
(_initialize_infcmd): Add "set/show print finish" commands.
* valprint.c (user_print_options): Initialize new member.
* valprint.h (struct value_print_options) <finish_print>: New
member.
gdb/doc/ChangeLog
2019-05-29 Tom Tromey <tromey@adacore.com>
* gdb.texinfo (Continuing and Stepping): Document new
commands.
gdb/testsuite/ChangeLog
2019-05-29 Tom Tromey <tromey@adacore.com>
* gdb.base/finish.exp (finish_no_print): New proc.
(finish_tests): Call it.
|
|
Introduce a new print setting max-depth which can be set with 'set
print max-depth DEPTH'. The default value of DEPTH is 20, but this
can also be set to unlimited.
When GDB is printing a value containing nested structures GDB will
stop descending at depth DEPTH. Here is a small example:
typedef struct s1 { int a; } s1;
typedef struct s2 { s1 b; } s2;
typedef struct s3 { s2 c; } s3;
typedef struct s4 { s3 d; } s4;
s4 var = { { { { 3 } } } };
The following table shows how various depth settings affect printing
of 'var':
| Depth Setting | Result of 'p var' |
|---------------+--------------------------------|
| Unlimited | $1 = {d = {c = {b = {a = 3}}}} |
| 4 | $1 = {d = {c = {b = {a = 3}}}} |
| 3 | $1 = {d = {c = {b = {...}}}} |
| 2 | $1 = {d = {c = {...}}} |
| 1 | $1 = {d = {...}} |
| 0 | $1 = {...} |
Only structures, unions, and arrays are replaced in this way, scalars
and strings are not replaced.
The replacement is counted from the level at which you print, not from
the top level of the structure. So, consider the above example and
this GDB session:
(gdb) set print max-depth 2
(gdb) p var
$1 = {d = {c = {...}}}
(gdb) p var.d
$2 = {c = {b = {...}}}
(gdb) p var.d.c
$3 = {b = {a = 3}}
Setting the max-depth to 2 doesn't prevent the user from exploring
deeper into 'var' by asking for specific sub-fields to be printed.
The motivation behind this feature is to try and give the user more
control over how much is printed when examining large, complex data
structures.
The default max-depth of 20 means that there is a change in GDB's
default behaviour. Someone printing a data structure with 20 levels
of nesting will now see '{...}' instead of their data, they would need
to adjust the max depth, or call print again naming a specific field
in order to dig deeper into their data structure. If this is
considered a problem then we could increase the default, or even make
the default unlimited.
This commit relies on the previous commit, which added a new field to
the language structure, this new field was a string that contained the
pattern that should be used when a structure/union/array is replaced
in the output, this allows languages to use a syntax that is more
appropriate, mostly this will be selecting the correct types of
bracket '(...)' or '{...}', both of which are currently in use.
This commit should have no impact on MI output, expressions are
printed through the MI using -var-create and then -var-list-children.
As each use of -var-list-children only ever displays a single level of
an expression then the max-depth setting will have no impact.
This commit also adds the max-depth mechanism to the scripting
language pretty printers following basically the same rules as for the
built in value printing.
One quirk is that when printing a value using the display hint 'map',
if the keys of the map are structs then GDB will hide the keys one
depth level after it hides the values, this ensures that GDB produces
output like this:
$1 = map_object = {[{key1}] = {...}, [{key2}] = {...}}
Instead of this less helpful output:
$1 = map_object = {[{...}] = {...}, [{...}] = {...}}
This is covered by the new tests in gdb.python/py-nested-maps.exp.
gdb/ChangeLog:
* cp-valprint.c (cp_print_value_fields): Allow an additional level
of depth when printing anonymous structs or unions.
* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
Don't print either the top-level value, or the children if the
max-depth is exceeded.
(ppscm_print_children): When printing the key of a map, allow one
extra level of depth.
* python/py-prettyprint.c (gdbpy_apply_val_pretty_printer): Don't
print either the top-level value, or the children if the max-depth
is exceeded.
(print_children): When printing the key of a map, allow one extra
level of depth.
* python/py-value.c (valpy_format_string): Add max_depth keyword.
* valprint.c: (PRINT_MAX_DEPTH_DEFAULT): Define.
(user_print_options): Initialise max_depth field.
(val_print_scalar_or_string_type_p): New function.
(val_print): Check to see if the max depth has been reached.
(val_print_check_max_depth): Define new function.
(show_print_max_depth): New function.
(_initialize_valprint): Add 'print max-depth' option.
* valprint.h (struct value_print_options) <max_depth>: New field.
(val_print_check_max_depth): Declare new function.
* NEWS: Document new feature.
gdb/doc/ChangeLog:
* gdb.texinfo (Print Settings): Document 'print max-depth'.
* guile.texi (Guile Pretty Printing API): Document that 'print
max-depth' can effect the display of a values children.
* python.texi (Pretty Printing API): Likewise.
(Values From Inferior): Document max_depth keyword.
gdb/testsuite/ChangeLog:
* gdb.base/max-depth.c: New file.
* gdb.base/max-depth.exp: New file.
* gdb.python/py-nested-maps.c: New file.
* gdb.python/py-nested-maps.exp: New file.
* gdb.python/py-nested-maps.py: New file.
* gdb.python/py-format-string.exp (test_max_depth): New proc.
(test_all_common): Call test_max_depth.
* gdb.fortran/max-depth.exp: New file.
* gdb.fortran/max-depth.f90: New file.
* gdb.go/max-depth.exp: New file.
* gdb.go/max-depth.go: New file.
* gdb.modula2/max-depth.exp: New file.
* gdb.modula2/max-depth.c: New file.
* lib/gdb.exp (get_print_expr_at_depths): New proc.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This changes read_string's "buffer" out-parameter to be a
unique_xmalloc_ptr, then updates the users. This allows for the
removal of some cleanups.
I chose unique_xmalloc_ptr rather than byte_vector here due to the way
Guile unwinding seems to work.
Tested by the buildbot.
gdb/ChangeLog
2018-06-18 Tom Tromey <tom@tromey.com>
* valprint.h (read_string): Update.
* valprint.c (read_string): Change type of "buffer".
(val_print_string): Update.
* python/py-value.c (valpy_string): Update.
* language.h (struct language_defn) <la_get_string>: Change
type of "buffer".
(default_get_string, c_get_string): Update.
* language.c (default_get_string): Change type of "buffer".
* guile/scm-value.c (gdbscm_value_to_string): Update.
* c-lang.c (c_get_string): Change type of "buffer".
|
|
This changes two out parameters of build_address_symbolic to be
std::string, and updates the callers. This allows removing some
cleanups.
This patch also moves the declaration of build_address_symbolic out of
defs.h. I think that many things in defs.h should be elsewhere
instead. In this case, I moved the declaration to valprint.h, becuase
there is no "printcmd.h" -- but perhaps it would be better to
introduce that instead.
Tested by the buildbot.
gdb/ChangeLog
2018-06-07 Tom Tromey <tom@tromey.com>
* valprint.h (build_address_symbolic): Declare.
* printcmd.c (print_address_symbolic): Update.
(build_address_symbolic): Change "name" and "filename" to
std::string.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Update.
* defs.h (build_address_symbolic): Remove declaration.
|
|
I happened to notice that output_command_const still exists, but is
not needed any more -- commands are always const-correct now. This
patch removes this leftover.
2018-05-21 Tom Tromey <tom@tromey.com>
* printcmd.c (output_command): Remove.
(output_command_const): Rename to output_command.
* valprint.h (output_command): Rename from output_command_const.
* tracepoint.c (trace_dump_actions): Call output_command.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
Now that print_scalar_formatted is more capable, there's no need for
val_print_type_code_int. This patch removes it in favor of
val_print_scalar_formatted.
2017-06-12 Tom Tromey <tom@tromey.com>
* valprint.h (val_print_type_code_int): Remove.
* valprint.c (generic_val_print_int): Always call
val_print_scalar_formatted.
(val_print_type_code_int): Remove.
* printcmd.c (print_scalar_formatted): Handle options->format==0.
* f-valprint.c (f_val_print): Use val_print_scalar_formatted.
* c-valprint.c (c_val_print_int): Use val_print_scalar_formatted.
* ada-valprint.c (ada_val_print_num): Use
val_print_scalar_formatted.
|
|
This changes print_decimal_chars to handle signed values.
gdb/ChangeLog
2017-06-12 Tom Tromey <tom@tromey.com>
PR exp/16225:
* valprint.h (print_decimal_chars): Update.
* valprint.c (maybe_negate_by_bytes): New function.
(print_decimal_chars): Add "is_signed" argument.
* printcmd.c (print_scalar_formatted): Update.
|
|
This changes print_octal_chars and print_decimal_chars to never zero
pad, and changes print_binary_chars and print_hex_chars to only
optionally zero-pad, based on a flag.
ChangeLog
2017-06-12 Tom Tromey <tom@tromey.com>
PR exp/16225:
* valprint.h (print_binary_chars, print_hex_chars): Update.
* valprint.c (val_print_type_code_int): Update.
(print_binary_chars): Add "zero_pad" argument.
(emit_octal_digit): New function.
(print_octal_chars): Don't zero-pad.
(print_decimal_chars): Likewise.
(print_hex_chars): Add "zero_pad" argument.
* sh64-tdep.c (sh64_do_fp_register): Update.
* regcache.c (regcache::dump): Update.
* printcmd.c (print_scalar_formatted): Update.
* infcmd.c (default_print_one_register_info): Update.
2017-06-12 Tom Tromey <tom@tromey.com>
PR exp/16225:
* gdb.reverse/i386-sse-reverse.exp: Update tests.
* gdb.arch/vsx-regs.exp: Update tests.
* gdb.arch/s390-vregs.exp (hex128): New proc.
Update test.
* gdb.arch/altivec-regs.exp: Update tests.
|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
Nowadays, we pass both val and return value of
value_contents_for_printing (val) to la_val_print. The latter is
unnecessary. This patch removes the second parameter of la_val_print,
and get valaddr in each language's implementation by calling
value_contents_for_printing. Since value_contents_for_printing calls
value_fetch_lazy, I also make VAL non-const.
Note that
- I don't clean up the valaddr usages in each language's routines,
- I don't remove valaddr from apply_ext_lang_val_pretty_printer, and
extension language ops apply_val_pretty_printer.
They can be done in followup patches.
gdb:
2016-11-08 Yao Qi <yao.qi@linaro.org>
* ada-lang.h (ada_val_print): Remove second parameter. Remove
const from "struct value *".
* ada-valprint.c (print_field_values): Remove const from
"struct value *".
(val_print_packed_array_elements): Likewise.
(print_variant_part): Likewise.
(ada_val_print_string): Likewise.
(ada_val_print_gnat_array): Likewise.
(ada_val_print_ptr): Likewise.
(ada_val_print_num): Likewise.
(ada_val_print_enum): Likewise.
(ada_val_print_flt): Likewise.
(ada_val_print_union): Likewise.
(ada_val_print_struct_union): Likewise.
(ada_val_print_ref): Likewise.
(ada_val_print_1): Remove second parameter. Remove const from
"struct value *".
(ada_val_print): Likewise.
* c-lang.h (c_val_print): Likewise.
* c-valprint.c (c_val_print_array): Remove const from
"struct value *".
(c_val_print_ptr): Likewise.
(c_val_print_struct): Likewise.
(c_val_print_union): Likewise.
(c_val_print_int): Likewise.
(c_val_print_memberptr): Likewise.
(c_val_print): Remove second parameter. Remove const from
"struct value *". All callers updated.
* cp-valprint.c (cp_print_value): Remove const from
"struct value *".
(cp_print_value_fields): Likewise.
(c_val_print_value): Likewise.
* d-lang.h (d_val_print): Remove second parameter. Remove const
from "struct value *".
* d-valprint.c (dynamic_array_type): Likewise.
(d_val_print): Likewise.
* f-lang.h (f_val_print): Likewise.
* f-valprint.c (f_val_print): Likewise.
* go-lang.h (go_val_print): Likewise.
* go-valprint.c (print_go_string): Likewise.
(go_val_print): Likewise.
* language.c (unk_lang_val_print): Likewise.
* language.h (struct language_defn) <la_val_print>: Likewise.
Update comments.
(LA_VAL_PRINT): Remove.
* m2-lang.h (m2_val_print): Remove const from
"struct value *".
* m2-valprint.c (m2_print_array_contents): Likewise.
(m2_val_print): Likewise.
* p-lang.h (pascal_val_print): Remove second parameter. Remove
const from "struct value *".
(pascal_object_print_value_fields): Likewise.
* p-valprint.c (pascal_val_print): Likewise.
(pascal_object_print_value_fields): Likewise.
(pascal_object_print_value): Likewise.
* rust-lang.c (rust_get_disr_info): Likewise.
(val_print_struct): Likewise.
(rust_val_print): Likewise.
* valprint.c (generic_val_print_array): Likewise.
(generic_val_print_ptr): Likewise.
(generic_val_print_memberptr): Likewise.
(generic_val_print_ref): Likewise.
(generic_val_print_enum): Likewise.
(generic_val_print_flags): Likewise.
(generic_val_print_func): Likewise.
(generic_val_print_bool): Likewise.
(generic_val_print_int): Likewise.
(generic_val_print_char): Likewise.
(generic_val_print_float): Likewise.
(generic_val_print_decfloat): Likewise.
(generic_val_print_complex): Likewise.
(generic_val_print): Likewise.
(val_print): Likewise.
(common_val_print): Likewise.
(val_print_type_code_flags): Likewise.
(val_print_scalar_formatted): Likewise.
(val_print_array_elements): Likewise.
* valprint.h (val_print_array_elements): Update declaration.
(val_print_scalar_formatted): Likewise.
(generic_val_print): Likewise.
* value.h (val_print): Likewise.
|
|
This patch removes the Java support from gdb. gcj has not seen much
development or use for years now, and was recently removed from GCC.
This patch changes gdb to follow; in the unlikely event that there are
still users using gcj, they can continue to use an older gdb to debug.
Or, they can debug in C++ mode.
Built and regtested on x86-64 Fedora 24.
2016-10-06 Tom Tromey <tom@tromey.com>
* MAINTAINERS: Remove Java test maintainer.
* varobj.h (java_varobj_ops): Don't declare.
* valprint.h (struct value_print_options)
<pascal_static_field_print>: Update comment.
* utils.c (producer_is_gcc): Remove java reference.
* symtab.h (struct general_symbol_info): Remove java references.
(SYMBOL_SEARCH_NAME): Likewise.
* objfiles.c (allocate_objfile): Update comment.
* linespec.c (find_linespec_symbols): Remove java references.
* gnu-v3-abi.c (gnuv3_rtti_type, gnuv3_baseclass_offset): Remove
java references.
* gdbtypes.h (struct cplus_struct_type) <is_java>: Remove.
(TYPE_CPLUS_REALLY_JAVA): Remove.
* c-varobj.c (enum vsections): Update comment.
* symtab.c (symbol_set_language, symbol_set_names)
(symbol_natural_name, symbol_demangled_name)
(demangle_for_lookup, symbol_matches_domain)
(default_make_symbol_completion_list_break_on_1): Remove java
references.
(JAVA_PREFIX, JAVA_PREFIX_LEN): Remove.
* psymtab.c (match_partial_symbol, psymtab_search_name)
(lookup_partial_symbol): Remove java references.
* dwarf2read.c (find_slot_in_mapped_hash): Remove java references.
(add_partial_symbol, dwarf2_compute_name, dwarf2_physname)
(dwarf2_add_member_fn, is_vtable_name, read_structure_type)
(process_structure_scope, read_subroutine_type)
(read_subrange_type, load_partial_dies)
(new_symbol_full, determine_prefix, typename_concat)
(dwarf2_name): Remove java references.
(set_cu_language): Treat Java as C++.
* c-typeprint.c (c_type_print_args): Remove java reference.
* defs.h (enum language) <language_java>: Remove.
* Makefile.in (SFILES, HFILES_NO_SRCDIR, COMMON_OBS, YYFILES)
(YYOBJ, local-maintainer-clean): Don't mention java files.
* jv-exp.y, jv-lang.c, jv-lang.h, jv-typeprint.c, jv-valprint.c,
jv-varobj.c: Remove.
2016-10-06 Tom Tromey <tom@tromey.com>
* guile.texi (Types In Guile): Remove Java mentions.
* python.texi (Types In Python): Remove Java mentions.
* gdb.texinfo (Address Locations, Supported Languages)
(Index Section Format): Remove Java mentions.
2016-10-06 Tom Tromey <tom@tromey.com>
* gdb.compile/compile.exp: Change java tests to rust.
* gdb.base/setshow.exp: Change java tests to rust.
* gdb.base/default.exp: Remove java from language list.
* README (Examples): Update language example.
* gdb.python/py-lookup-type.exp (test_lookup_type): Remove java
test.
* lib/gdb.exp (skip_java_tests): Remove.
* lib/java.exp: Remove.
* gdb.java: Remove.
|
|
GDB computes structure byte offsets using a 32 bit integer. And,
first it computes the offset in bits and then converts to bytes. The
result is that any offset that if 512K bytes or larger overflows.
This patch changes GDB to use LONGEST for such calculations.
PR gdb/17520 Structure offset wrong when 1/4 GB or greater.
* c-lang.h: Change all parameters, variables, and struct or union
members used as struct or union fie3ld offsets from int to
LONGEST.
* c-valprint.c: Likewise.
* cp-abi.c: Likewise.
* cp-abi.h: Likewise.
* cp-valprint.c: Likewise.
* d-valprint.c: Likewise.
* dwarf2loc.c: Likewise.
* eval.c: Likewise.
* extension-priv.h: Likewise.
* extension.c: Likewise.
* extension.h: Likewise.
* findvar.c: Likewise.
* gdbtypes.h: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-valprint.c: Likewise.
* guile/guile-internal.h: Likewise.
* guile/scm-pretty-print.c: Likewise.
* jv-valprint.c Likewise.
* opencl-lang.c: Likewise.
* p-lang.h: Likewise.
* python/py-prettyprint.c: Likewise.
* python/python-internal.h: Likewise.
* spu-tdep.c: Likewise.
* typeprint.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* valprint.h: Likewise.
* value.c: Likewise.
* value.h: Likewise.
* p-valprint.c: Likewise.
* c-typeprint.c (c_type_print_base): When printing offset, use
plongest, not %d.
* gdbtypes.c (recursive_dump_type): Ditto.
|
|
For Rust value-printing, I wanted to use generic_val_print_array, but
I also wanted to control the starting and ending strings.
This patch adds new strings to generic_val_print_decorations, updates
generic_val_print_array to use them, and updates all the existing
instances of generic_val_print_decorations.
2016-05-17 Tom Tromey <tom@tromey.com>
* valprint.h (struct generic_val_print_array) <array_start,
array_end>: New fields.
* valprint.c (generic_val_print_array): Add "decorations"
parameter. Use "array_start", "array_end".
(generic_val_print) <TYPE_CODE_ARRAY>: Update.
* p-valprint.c (p_decorations): Update.
* m2-valprint.c (m2_decorations): Update.
* f-valprint.c (f_decorations): Update.
* c-valprint.c (c_decorations): Update.
|
|
gdb/ChangeLog:
Extend flags to support multibit and enum bitfields.
NEWS: Document new features.
* c-typeprint.c (c_type_print_varspec_prefix): Handle TYPE_CODE_FLAGS.
(c_type_print_varspec_suffix, c_type_print_base): Ditto.
* gdbtypes.c (arch_flags_type): Don't assume all fields are one bit.
(append_flags_type_field): New function.
(append_flags_type_flag): Call it.
* gdbtypes.h (append_flags_type_field): Declare.
* target-descriptions.c (struct tdesc_type_flag): Delete.
(enum tdesc_type_kind) <TDESC_TYPE_BOOL>: New enum value.
(enum tdesc_type_kind) <TDESC_TYPE_ENUM>: Ditto.
(struct tdesc_type) <u.f>: Delete.
(tdesc_predefined_types): Add "bool".
(tdesc_predefined_type): New function.
(tdesc_gdb_type): Handle TDESC_TYPE_BOOL, TDESC_TYPE_ENUM.
Update TDESC_TYPE_FLAGS support.
(tdesc_free_type): Handle TDESC_TYPE_ENUM. Update TDESC_TYPE_FLAGS.
(tdesc_create_flags): Update.
(tdesc_create_enum): New function.
(tdesc_add_field): Initialize start,end to -1.
(tdesc_add_typed_bitfield): New function.
(tdesc_add_bitfield): Call it.
(tdesc_add_flag): Allow TDESC_TYPE_STRUCT. Update.
(tdesc_add_enum_value): New function.
(maint_print_c_tdesc_cmd): Fold TDESC_TYPE_FLAGS support into
TDESC_TYPE_STRUCT. Handle TDESC_TYPE_ENUM.
* target-descriptions.h (tdesc_create_enum): Declare.
(tdesc_add_typed_bitfield, tdesc_add_enum_value): Declare.
* valprint.c (generic_val_print_enum_1): New function.
(generic_val_print_enum): Call it.
(val_print_type_code_flags): Make static. Handle multibit bitfields
and enum bitfields.
* valprint.h (val_print_type_code_flags): Delete.
* xml-tdesc.c (struct tdesc_parsing_data) <current_type_is_flags>:
Delete. All uses removed.
(tdesc_start_enum): New function.
(tdesc_start_field): Handle multibit and enum bitfields.
(tdesc_start_enum_value): New function.
(enum_value_attributes, enum_children, enum_attributes): New static
globals.
(feature_children): Add "enum".
* features/gdb-target.dtd (enum, evalue): New elements.
gdb/doc/ChangeLog:
* gdb.texinfo (Target Descriptions): New menu item "Enum Target Types".
(Target Description Format): Mention enum types. Update docs on
flags types.
(Predefined Target Types): Add "bool".
(Enum Target Types): New node.
gdb/testsuite/ChangeLog:
* gdb.xml/extra-regs.xml: Add enum, mixed_flags values.
* gdb.xml/tdesc-regs.exp (load_description): New arg xml_file.
All callers updated. Add tests for enums, mixed flags register.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
The later 'compile print' command should share its behavior with the existing
'print' command. Make the needed existing parts of print_command_1 public.
gdb/ChangeLog
2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* printcmd.c (struct format_data): Move it to valprint.h.
(print_command_parse_format, print_value): New functions from ...
(print_command_1): ... here. Call them.
* valprint.h (struct format_data): Move it here from printcmd.c.
(print_command_parse_format, print_value): New declarations.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
|
|
Doing "info frame" in the outermost frame, when that was indicated by
the next frame saying the unwound PC is undefined/not saved, results
in error and incomplete output:
(gdb) bt
#0 thread_function0 (arg=0x0) at threads.c:63
#1 0x00000034cf407d14 in start_thread (arg=0x7ffff7fcb700) at pthread_create.c:309
#2 0x000000323d4f168d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:115
(gdb) frame 2
#2 0x000000323d4f168d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:115
115 call *%rax
(gdb) info frame
Stack level 2, frame at 0x0:
rip = 0x323d4f168d in clone (../sysdeps/unix/sysv/linux/x86_64/clone.S:115); saved rip Register 16 was not saved
(gdb)
Not saved register values are treated as optimized out values
internally throughout. stack.c:frame_info is handing unvailable
values, but not optimized out ones. The patch deletes the
frame_unwind_caller_pc_if_available wrapper function and instead lets
errors propagate to frame_info (it's only user).
As frame_unwind_pc now needs to be able to handle and cache two
different error scenarios, the prev_pc.p variable is replaced with an
enumeration.
(FWIW, I looked into making gdbarch_unwind_pc or a variant return
struct value's instead, but it results in lots of boxing and unboxing
for no real gain -- e.g., the mips and arm implementations need to do
computation on the unboxed PC value. Might as well throw an error on
first attempt to get at invalid contents.)
After the patch, we get:
(gdb) info frame
Stack level 2, frame at 0x0:
rip = 0x323d4f168d in clone (../sysdeps/unix/sysv/linux/x86_64/clone.S:115); saved rip = <not saved>
Outermost frame: outermost
caller of frame at 0x7ffff7fcafc0
source language asm.
Arglist at 0x7ffff7fcafb8, args:
Locals at 0x7ffff7fcafb8, Previous frame's sp is 0x7ffff7fcafc8
(gdb)
A new test is added. It's based off dw2-reg-undefined.exp, and tweaked to
mark the return address (rip) of "stop_frame" as undefined.
Tested on x86_64 Fedora 17.
gdb/
2013-12-06 Pedro Alves <palves@redhat.com>
* frame.c (enum cached_copy_status): New enum.
(struct frame_info) <prev_pc.p>: Change type to enum
cached_copy_status.
(fprint_frame): Handle not saved and unavailable prev_pc values.
(frame_unwind_pc_if_available): Delete and merge contents into ...
(frame_unwind_pc): ... here. Handle OPTIMIZED_OUT_ERROR. Adjust
to use enum cached_copy_status.
(frame_unwind_caller_pc_if_available): Delete.
(create_new_frame): Adjust.
* frame.h (frame_unwind_caller_pc_if_available): Delete
declaration.
* stack.c (frame_info): Use frame_unwind_caller_pc instead of
frame_unwind_caller_pc_if_available, and handle
NOT_AVAILABLE_ERROR and OPTIMIZED_OUT_ERROR errors.
* valprint.c (val_print_optimized_out): Use val_print_not_saved.
(val_print_not_saved): New function.
* valprint.h (val_print_not_saved): Declare.
gdb/testsuite/
2013-12-06 Pedro Alves <palves@redhat.com>
* gdb.dwarf2/dw2-undefined-ret-addr.S: New file.
* gdb.dwarf2/dw2-undefined-ret-addr.c: New file.
* gdb.dwarf2/dw2-undefined-ret-addr.exp: New file.
|
|
"<optimized out>".
Currently, in some scenarios, GDB prints <optimized out> when printing
outer frame registers. An <optimized out> register is a confusing
concept. What this really means is that the register is
call-clobbered, or IOW, not saved by the callee. This patch makes GDB
say that instead.
Before patch:
(gdb) p/x $rax $1 = <optimized out>
(gdb) info registers rax
rax <optimized out>
After patch:
(gdb) p/x $rax
$1 = <not saved>
(gdb) info registers rax
rax <not saved>
However, if for some reason the debug info describes a variable as
being in such a register (**), we still want to print <optimized out>
when printing the variable. IOW, <not saved> is reserved for
inspecting registers at the machine level. The patch uses
lval_register+optimized_out to encode the not saved registers, and
makes it so that optimized out variables always end up in
!lval_register values.
** See <https://sourceware.org/ml/gdb-patches/2012-08/msg00787.html>.
Current/recent enough GCC doesn't mark variables/arguments as being in
call-clobbered registers in the ranges corresponding to function
calls, while older GCCs did. Newer GCCs will just not say where the
variable is, so GDB will end up realizing the variable is optimized
out.
frame_unwind_got_optimized creates not_lval optimized out registers,
so by default, in most cases, we'll see <optimized out>.
value_of_register is the function eval.c uses for evaluating
OP_REGISTER (again, $pc, etc.), and related bits. It isn't used for
anything else. This function makes sure to return lval_register
values. The patch makes "info registers" and the MI equivalent use it
too. I think it just makes a lot of sense, as this makes it so that
when printing machine registers ($pc, etc.), we go through a central
function.
We're likely to need a different encoding at some point, if/when we
support partially saved registers. Even then, I think
value_of_register will still be the spot to tag the intention to print
machine register values differently.
value_from_register however may also return optimized out
lval_register values, so at a couple places where we're computing a
variable's location from a dwarf expression, we convert the resulting
value away from lval_register to a regular optimized out value.
Tested on x86_64 Fedora 17
gdb/
2013-10-02 Pedro Alves <palves@redhat.com>
* cp-valprint.c (cp_print_value_fields): Adjust calls to
val_print_optimized_out.
* jv-valprint.c (java_print_value_fields): Likewise.
* p-valprint.c (pascal_object_print_value_fields): Likewise.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full)
<DWARF_VALUE_REGISTER>: If the register was not saved, return a
new optimized out value.
* findvar.c (address_from_register): Likewise.
* frame.c (put_frame_register): Tweak error string to say the
register was not saved, rather than optimized out.
* infcmd.c (default_print_one_register_info): Adjust call to
val_print_optimized_out. Use value_of_register instead of
get_frame_register_value.
* mi/mi-main.c (output_register): Use value_of_register instead of
get_frame_register_value.
* valprint.c (valprint_check_validity): Likewise.
(val_print_optimized_out): New value parameter. If the value is
lval_register, print <not saved> instead.
(value_check_printable, val_print_scalar_formatted): Adjust calls
to val_print_optimized_out.
* valprint.h (val_print_optimized_out): New value parameter.
* value.c (struct value) <optimized_out>: Extend comment.
(error_value_optimized_out): New function.
(require_not_optimized_out): Use it. Use a different string for
lval_register values.
* value.h (error_value_optimized_out): New declaration.
* NEWS: Mention <not saved>.
gdb/testsuite/
2013-10-02 Pedro Alves <palves@redhat.com>
* gdb.dwarf2/dw2-reg-undefined.exp <pattern_rax_rbx_rcx_print,
pattern_rax_rbx_rcx_info>: Set to "<not saved>".
* gdb.mi/mi-reg-undefined.exp (opt_out_pattern): Delete.
(not_saved_pattern): New.
Replace use of the former with the latter.
gdb/doc/
2013-10-02 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Registers): Expand description of saved registers
in frames. Explain <not saved>.
|
|
This is the patch to add new option '--skip-unavailable' to MI
commands '-stack-list-{locals, arguments, variables}'. This patch
extends list_args_or_locals to add a new parameter 'skip_unavailable',
and don't list locals or arguments if values are unavailable and
'skip_unavailable' is true.
This is inspecting a trace frame (tfind mode), where only a few
locals have been collected.
-stack-list-locals, no switch vs new switch:
-stack-list-locals --simple-values
^done,locals=[{name="array",type="unsigned char [2]"},{name="i",type="int",value="<unavailable>"}]
-stack-list-locals --skip-unavailable --simple-values
^done,locals=[{name="array",type="unsigned char [2]"}]
-stack-list-arguments, no switch vs new switch:
-stack-list-arguments --simple-values
^done,stack-args=[frame={level="0",args=[{name="j",type="int",value="4"},{name="s",type="char *",value="<unavailable>"}]},frame={level="1",args=[]}]
-stack-list-arguments --skip-unavailable --simple-values
^done,stack-args=[frame={level="0",args=[{name="j",type="int",value="4"}]},frame={level="1",args=[]}]
-stack-list-variables, no switch vs new switch:
-stack-list-variables --simple-values
^done,variables=[{name="j",arg="1",type="int",value="4"},{name="s",arg="1",type="char *",value="<unavailable>"},{name="array",type="unsigned char [2]"},{name="i",type="int",value="<unavailable>"}]
-stack-list-variables --skip-unavailable --simple-values
^done,variables=[{name="j",arg="1",type="int",value="4"},{name="array",type="unsigned char [2]"}]
tests are added to test these new options.
gdb:
2013-08-27 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* mi/mi-cmd-stack.c (list_args_or_locals): Adjust prototype.
(parse_no_frames_option): Remove.
(mi_cmd_stack_list_locals): Handle --skip-unavailable.
(mi_cmd_stack_list_args): Adjust.
(mi_cmd_stack_list_variables): Handle --skip-unavailable.
(list_arg_or_local): Add new parameter 'skip_unavailable'. Return
early if SKIP_UNAVAILABLE is true and ARG->val is unavailable.
Caller update.
(list_args_or_locals): New parameter 'skip_unavailable'.
Handle it.
* valprint.c (scalar_type_p): Rename to ...
(val_print_scalar_type_p): ... this. Make extern.
(val_print, value_check_printable): Adjust.
* valprint.h (val_print_scalar_type_p): Declare.
* value.c (value_entirely_unavailable): New function.
* value.h (value_entirely_unavailable): Declare.
* NEWS: Mention the new option "--skip-unavailable" to MI
commands '-stack-list-locals', '-stack-list-arguments' and
'-stack-list-variables'.
gdb/doc:
2013-08-27 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* gdb.texinfo (GDB/MI Stack Manipulation) <-stack-list-locals>:
Document new --skip-unavailable option.
<-stack-list-variables>: Document new --skip-unavailable option.
gdb/testsuite:
2013-08-27 Yao Qi <yao@codesourcery.com>
* gdb.trace/entry-values.exp: Test unavailable entry value is
not shown when option '--skip-unavailable' is specified.
* gdb.trace/mi-trace-unavailable.exp (test_trace_unavailable):
Add tests for new option '--skip-unavailable'.
|
|
* gdbcmd.h (setprintrawlist, showprintrawlist): Declare.
* stack.c (print_raw_frame_arguments): New static global.
(print_frame_arg): Set opts.raw from print_raw_frame_arguments.
(_initialize_stack): New command "set/show print raw frame-arguments".
* valprint.c (setprintrawlist, showprintrawlist): New globals.
(set_print_raw, show_print_raw): New functions.
(_initialize_valprint): New prefix command "set/show print raw".
* valprint.h (value_print_options): Improve comments.
doc/
* gdb.texinfo (Print Settings): Document "print raw frame-arguments".
testsuite/
* gdb.python/py-frame-args.c: New file.
* gdb.python/py-frame-args.py: New file.
* gdb.python/py-frame-args.exp New file.
|
|
Enum values rename as well. All uses updated.
* valprint.h (value_print_options): Rename member pretty to
pretty format. Rename member prettyprint_arrays to
prettyformat_arrays. Rename member prettyprint_structs to
prettyformat_structs. All uses updated.
(get_no_prettyformat_print_options): Renamed from
get_raw_print_options.
* valprint.c (get_no_prettyformat_print_options): Renamed from
get_raw_print_options. All callers updated.
(show_prettyformat_structs): Renamed from show_prettyprint_structs.
All callers updated.
(show_prettyformat_arrays): Renamed from show_prettyprint_arrays.
All callers updated.
(_initialize_valprint): Improve help text for "set print pretty" and
"set print arrays".
testsuite/
* gdb.base/default.exp: Update expected output of "show print array"
and "show print pretty".
|
