| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The following patch removes the current_top_target function, replacing
uses with `current_inferior ()->top_target ()`. This is a problem for
uses in target.h, because they don't have access to the current_inferior
function and the inferior structure: target.h can't include inferior.h,
otherwise that would make a cyclic inclusion.
Avoid this by moving all implementations of the wrappers that call
target methods with the current target to target.c. Many of them are
changed from a macro to a function, which is an improvement for
readability and debuggability, IMO.
target_shortname and target_longname were not function-like macros, so a
few adjustments are needed.
gdb/ChangeLog:
* target.h (target_shortname): Change to function declaration.
(target_longname): Likewise.
(target_attach_no_wait): Likewise.
(target_post_attach): Likewise.
(target_prepare_to_store): Likewise.
(target_supports_enable_disable_tracepoint): Likewise.
(target_supports_string_tracing): Likewise.
(target_supports_evaluation_of_breakpoint_conditions): Likewise.
(target_supports_dumpcore): Likewise.
(target_dumpcore): Likewise.
(target_can_run_breakpoint_commands): Likewise.
(target_files_info): Likewise.
(target_post_startup_inferior): Likewise.
(target_insert_fork_catchpoint): Likewise.
(target_remove_fork_catchpoint): Likewise.
(target_insert_vfork_catchpoint): Likewise.
(target_remove_vfork_catchpoint): Likewise.
(target_insert_exec_catchpoint): Likewise.
(target_remove_exec_catchpoint): Likewise.
(target_set_syscall_catchpoint): Likewise.
(target_rcmd): Likewise.
(target_can_lock_scheduler): Likewise.
(target_can_async_p): Likewise.
(target_is_async_p): Likewise.
(target_execution_direction): Likewise.
(target_extra_thread_info): Likewise.
(target_pid_to_exec_file): Likewise.
(target_thread_architecture): Likewise.
(target_find_memory_regions): Likewise.
(target_make_corefile_notes): Likewise.
(target_get_bookmark): Likewise.
(target_goto_bookmark): Likewise.
(target_stopped_by_watchpoint): Likewise.
(target_stopped_by_sw_breakpoint): Likewise.
(target_supports_stopped_by_sw_breakpoint): Likewise.
(target_stopped_by_hw_breakpoint): Likewise.
(target_supports_stopped_by_hw_breakpoint): Likewise.
(target_have_steppable_watchpoint): Likewise.
(target_can_use_hardware_watchpoint): Likewise.
(target_region_ok_for_hw_watchpoint): Likewise.
(target_can_do_single_step): Likewise.
(target_insert_watchpoint): Likewise.
(target_remove_watchpoint): Likewise.
(target_insert_hw_breakpoint): Likewise.
(target_remove_hw_breakpoint): Likewise.
(target_can_accel_watchpoint_condition): Likewise.
(target_can_execute_reverse): Likewise.
(target_get_ada_task_ptid): Likewise.
(target_filesystem_is_local): Likewise.
(target_trace_init): Likewise.
(target_download_tracepoint): Likewise.
(target_can_download_tracepoint): Likewise.
(target_download_trace_state_variable): Likewise.
(target_enable_tracepoint): Likewise.
(target_disable_tracepoint): Likewise.
(target_trace_start): Likewise.
(target_trace_set_readonly_regions): Likewise.
(target_get_trace_status): Likewise.
(target_get_tracepoint_status): Likewise.
(target_trace_stop): Likewise.
(target_trace_find): Likewise.
(target_get_trace_state_variable_value): Likewise.
(target_save_trace_data): Likewise.
(target_upload_tracepoints): Likewise.
(target_upload_trace_state_variables): Likewise.
(target_get_raw_trace_data): Likewise.
(target_get_min_fast_tracepoint_insn_len): Likewise.
(target_set_disconnected_tracing): Likewise.
(target_set_circular_trace_buffer): Likewise.
(target_set_trace_buffer_size): Likewise.
(target_set_trace_notes): Likewise.
(target_get_tib_address): Likewise.
(target_set_permissions): Likewise.
(target_static_tracepoint_marker_at): Likewise.
(target_static_tracepoint_markers_by_strid): Likewise.
(target_traceframe_info): Likewise.
(target_use_agent): Likewise.
(target_can_use_agent): Likewise.
(target_augmented_libraries_svr4_read): Likewise.
(target_log_command): Likewise.
* target.c (target_shortname): New.
(target_longname): New.
(target_attach_no_wait): New.
(target_post_attach): New.
(target_prepare_to_store): New.
(target_supports_enable_disable_tracepoint): New.
(target_supports_string_tracing): New.
(target_supports_evaluation_of_breakpoint_conditions): New.
(target_supports_dumpcore): New.
(target_dumpcore): New.
(target_can_run_breakpoint_commands): New.
(target_files_info): New.
(target_post_startup_inferior): New.
(target_insert_fork_catchpoint): New.
(target_remove_fork_catchpoint): New.
(target_insert_vfork_catchpoint): New.
(target_remove_vfork_catchpoint): New.
(target_insert_exec_catchpoint): New.
(target_remove_exec_catchpoint): New.
(target_set_syscall_catchpoint): New.
(target_rcmd): New.
(target_can_lock_scheduler): New.
(target_can_async_p): New.
(target_is_async_p): New.
(target_execution_direction): New.
(target_extra_thread_info): New.
(target_pid_to_exec_file): New.
(target_thread_architecture): New.
(target_find_memory_regions): New.
(target_make_corefile_notes): New.
(target_get_bookmark): New.
(target_goto_bookmark): New.
(target_stopped_by_watchpoint): New.
(target_stopped_by_sw_breakpoint): New.
(target_supports_stopped_by_sw_breakpoint): New.
(target_stopped_by_hw_breakpoint): New.
(target_supports_stopped_by_hw_breakpoint): New.
(target_have_steppable_watchpoint): New.
(target_can_use_hardware_watchpoint): New.
(target_region_ok_for_hw_watchpoint): New.
(target_can_do_single_step): New.
(target_insert_watchpoint): New.
(target_remove_watchpoint): New.
(target_insert_hw_breakpoint): New.
(target_remove_hw_breakpoint): New.
(target_can_accel_watchpoint_condition): New.
(target_can_execute_reverse): New.
(target_get_ada_task_ptid): New.
(target_filesystem_is_local): New.
(target_trace_init): New.
(target_download_tracepoint): New.
(target_can_download_tracepoint): New.
(target_download_trace_state_variable): New.
(target_enable_tracepoint): New.
(target_disable_tracepoint): New.
(target_trace_start): New.
(target_trace_set_readonly_regions): New.
(target_get_trace_status): New.
(target_get_tracepoint_status): New.
(target_trace_stop): New.
(target_trace_find): New.
(target_get_trace_state_variable_value): New.
(target_save_trace_data): New.
(target_upload_tracepoints): New.
(target_upload_trace_state_variables): New.
(target_get_raw_trace_data): New.
(target_get_min_fast_tracepoint_insn_len): New.
(target_set_disconnected_tracing): New.
(target_set_circular_trace_buffer): New.
(target_set_trace_buffer_size): New.
(target_set_trace_notes): New.
(target_get_tib_address): New.
(target_set_permissions): New.
(target_static_tracepoint_marker_at): New.
(target_static_tracepoint_markers_by_strid): New.
(target_traceframe_info): New.
(target_use_agent): New.
(target_can_use_agent): New.
(target_augmented_libraries_svr4_read): New.
(target_log_command): New.
* bfin-tdep.c (bfin_sw_breakpoint_from_kind): Adjust.
* infrun.c (set_schedlock_func): Adjust.
* mi/mi-main.c (exec_reverse_continue): Adjust.
* reverse.c (exec_reverse_once): Adjust.
* sh-tdep.c (sh_sw_breakpoint_from_kind): Adjust.
* tui/tui-stack.c (tui_locator_window::make_status_line): Adjust.
* remote-sim.c (gdbsim_target::detach): Adjust.
(gdbsim_target::files_info): Adjust.
Change-Id: I72ef56e9a25adeb0b91f1ad05e34c89f77ebeaa8
|
|
If the user implements a TUI window in Python, and this window
responds to GDB events and then redraws its window contents then there
is currently an edge case which can lead to problems.
The Python API documentation suggests that calling methods like erase
or write on a TUI window (from Python code) will raise an exception if
the window is not valid.
And the description for is_valid says:
This method returns True when this window is valid. When the user
changes the TUI layout, windows no longer visible in the new layout
will be destroyed. At this point, the gdb.TuiWindow will no longer
be valid, and methods (and attributes) other than is_valid will
throw an exception.
From this I, as a user, would expect that if I did 'tui disable' to
switch back to CLI mode, then the window would no longer be valid.
However, this is not the case.
When the TUI is disabled the windows in the TUI are not deleted, they
are simply hidden. As such, currently, the is_valid method continues
to return true.
This means that if the users Python code does something like:
def event_handler (e):
global tui_window_object
if tui_window_object->is_valid ():
tui_window_object->erase ()
tui_window_object->write ("Hello World")
gdb.events.stop.connect (event_handler)
Then when a stop event arrives GDB will try to draw the TUI window,
even when the TUI is disabled.
This exposes two bugs. First, is_valid should be returning false in
this case, second, if the user forgot to add the is_valid call, then I
believe the erase and write calls should be throwing an
exception (when the TUI is disabled).
The solution to both of these issues is I think bound together, as it
depends on having a working 'is_valid' check.
There's a rogue assert added into tui-layout.c as part of this
commit. While working on this commit I managed to break GDB such that
TUI_CMD_WIN was nullptr, this was causing GDB to abort. I'm leaving
the assert in as it might help people catch issues in the future.
This patch is inspired by the work done here:
https://sourceware.org/pipermail/gdb-patches/2020-December/174338.html
gdb/ChangeLog:
* python/py-tui.c (gdbpy_tui_window) <is_valid>: New member
function.
(REQUIRE_WINDOW): Call is_valid member function.
(REQUIRE_WINDOW_FOR_SETTER): New define.
(gdbpy_tui_is_valid): Call is_valid member function.
(gdbpy_tui_set_title): Call REQUIRE_WINDOW_FOR_SETTER instead.
* tui/tui-data.h (struct tui_win_info) <is_visible>: Check
tui_active too.
* tui/tui-layout.c (tui_apply_current_layout): Add an assert.
* tui/tui.c (tui_enable): Move setting of tui_active earlier in
the function.
gdb/doc/ChangeLog:
* python.texinfo (TUI Windows In Python): Extend description of
TuiWindow.is_valid.
gdb/testsuite/ChangeLog:
* gdb.python/tui-window-disabled.c: New file.
* gdb.python/tui-window-disabled.exp: New file.
* gdb.python/tui-window-disabled.py: New file.
|
|
This commit was inspired by this mailing list patch:
https://sourceware.org/pipermail/gdb-patches/2021-January/174713.html
Currently, calling tui_layout_window::apply will add the window from
the layout object to the global tui_windows list.
Unfortunately, when the user runs the 'winheight' command, this calls
tui_adjust_window_height, which calls the tui_layout_base::adjust_size
function, which can then call tui_layout_base::apply. The consequence
of this is that when the user does 'winheight' duplicate copies of a
window can be added to the global tui_windows list.
The original patch fixed this by changing the apply function to only
update the global list some of the time.
This patch takes a different approach. The apply function no longer
updates the global tui_windows list. Instead a new virtual function
is added to tui_layout_base which is used to gather all the currently
applied windows into a vector. Finally tui_apply_current_layout is
updated to make use of this new function to update the tui_windows
list.
The benefits I see in this approach are, (a) the apply function now no
longer touches global state, this solves the immediate problem,
and (b) now that tui_windows is updated directly in the function
tui_apply_current_layout, we can drop the saved_tui_windows global.
gdb/ChangeLog:
* tui-layout.c (saved_tui_windows): Delete.
(tui_apply_current_layout): Don't make use of saved_tui_windows,
call new get_windows member function instead.
(tui_get_window_by_name): Check in tui_windows.
(tui_layout_window::apply): Don't add to tui_windows.
* tui-layout.h (tui_layout_base::get_windows): New member function.
(tui_layout_window::get_windows): Likewise.
(tui_layout_split::get_windows): Likewise.
gdb/testsuite/ChangeLog:
* gdb.tui/winheight.exp: Add more tests.
|
|
In commit:
commit f237f998d1168139d599c550d54169cd8f94052d
Date: Mon Jan 25 18:43:19 2021 +0000
gdb/tui: remove special handling of locator/status window
I accidentally remove a call to delete the tui window objects. Now
every time GDB changes tui layout it is leaking windows.
gdb/ChangeLog:
* tui/tui-layout.c (tui_apply_current_layout): Restore the delete
of the window objects.
|
|
My initial goal was to fix our gdb/testsuite/lib/tuiterm.exp such that
it would correctly support (some limited) scrolling of the command
window.
What I observe is that when sending commands to the tui command window
in a test script with:
Term::command "p 1"
The command window would be left looking like this:
(gdb)
(gdb) p 1$1 = 1
(gdb)
When I would have expected it to look like this:
(gdb) p 1
$1 = 1
(gdb)
Obviously a bug in our tuiterm.exp library, right???
Wrong!
Turns out there's a bug in GDB.
If in GDB I enable the tui and then type (slowly) the 'p 1\r' (the \r
is pressing the return key at the end of the string), then you do
indeed get the "expected" terminal output.
However, if instead I copy the 'p 1\r' string and paste it into the
tui in one go then I now see the same corrupted output as we do when
using tuiterm.exp.
It turns out the problem is that GDB fails when handling lots of input
arriving quickly with a \r (or \n) on the end.
The reason for this bug is as follows:
When the tui is active the terminal is in no-echo mode, so characters
sent to the terminal are not echoed out again. This means that when
the user types \r, this is not echoed to the terminal.
The characters read in are passed to readline and \r indicates that
the command line is complete and ready to be processed. However, the
\r is not included in readlines command buffer, and is NOT printed by
readline when is displays its buffer to the screen.
So, in GDB we have to manually spot the \r when it is read in and
update the display. Printing a newline character to the output and
moving the cursor to the next line. This is done in tui_getc_1.
Now readline tries to reduce the number of write calls. So if we very
quickly (as in paste in one go) the text 'p 1' to readline (this time
with no \r on the end), then readline will fetch the fist character
and add it to its internal buffer. But before printing the character
out readline checks to see if there's more input incoming. As we
pasted multiple characters, then yes, readline sees the ' ' and adds
this to its buffer, and finally the '1', this too is added to the
buffer.
Now if at this point we take a break, readline sees there is no more
input available, and so prints its buffer out.
Now when we press \r the code in tui_getc_1 kicks in, adds a \n to the
output and moves the cursor to the next line.
But, if instead we paste 'p 1\r' in one go then readline adds 'p 1' to
its buffer as before, but now it sees that there is still more input
available. Now it fetches the '\r', but this triggers the newline
behaviour, we print '\n' and move to the next line - however readline
has not printed its buffer yet!
So finally we end up on the next line. There's no more input
available so readline prints its buffer, then GDB gets passed the
buffer, handles it, and prints the result.
The solution I think is to put of our special newline insertion code
until we know that readline has finished printing its buffer. Handily
we know when this is - the next thing readline does is pass us the
command line buffer for processing. So all we need to do is hook in
to the command line processing, and before we pass the command line to
GDB's internals we do all of the magic print a newline and move the
cursor to the next line stuff.
Luckily, GDB's interpreter mechanism already provides the hooks we
need to do this. So all I do here is move the newline printing code
from tui_getc_1 into a new function, setup a new input_handler hook
for the tui, and call my new newline printing function.
After this I can enable the tui and paste in 'p 1\r' and see the
correct output.
Also the tuiterm.exp library will now see non-corrupted output.
gdb/ChangeLog:
* tui/tui-interp.c (tui_command_line_handler): New function.
(tui_interp::resume): Register tui_command_line_handler as the
input_handler.
* tui/tui-io.c (tui_inject_newline_into_command_window): New
function.
(tui_getc_1): Delete handling of '\n' and '\r'.
* tui-io.h (tui_inject_newline_into_command_window): Declare.
gdb/testsuite/ChangeLog:
* gdb.tui/scroll.exp: Tighten expected results. Remove comment
about bug in GDB, update expected results, and add more tests.
|
|
If the regs window is not big enough to show all registers, the
registers whose values changed are always drawn, even if they are not
in the currently visible area.
So this marks the invisible register sub windows with y=0, and skips
their rerender call in check_register_values.
gdb/ChangeLog:
2021-02-07 Hannes Domani <ssbssa@yahoo.de>
* tui/tui-regs.c (tui_data_window::display_registers_from):
Mark invisible register sub windows.
(tui_data_window::check_register_values): Ignore invisible
register sub windows.
|
|
Function n_spaces can't handle negative values, and returns an invalid
pointer in this case.
gdb/ChangeLog:
2021-02-07 Hannes Domani <ssbssa@yahoo.de>
* tui/tui-regs.c (tui_data_item_window::rerender): Don't call
n_spaces with a negative value.
|
|
Otherwise the register window is redrawn empty when scrolling or
changing its size with winheight.
gdb/ChangeLog:
2021-02-07 Hannes Domani <ssbssa@yahoo.de>
* tui/tui-regs.c (tui_data_window::display_registers_from):
Add refresh_window call.
|
|
The locator window, or status window as it is sometimes called is
handled differently to all the other windows.
The reason for this is that the class representing this
window (tui_locator_window) does two jobs, first this class represents
a window just like any other that has space on the screen and fills
the space with content. The second job is that this class serves as a
storage area to hold information about the current location that the
TUI windows represent, so the class has members like 'addr' and
'line_no', for example which are used within this class, and others
when they want to know which line/address the TUI windows should be
showing to the user.
Because of this dual purpose we must always have an instance of the
tui_locator_window so that there is somewhere to store this location
information.
The result of this is that the locator window must never be deleted
like other windows, which results in some special case code.
In this patch I propose splitting the two roles of the
tui_locator_window class. The tui_locator_window class will retain
just its window drawing parts, and will be treated just like any other
window. This should allow all special case code for this window to be
deleted.
The other role, that of tracking the current tui location will be
moved into a new class (tui_location_tracker), of which there will be
a single global instance. All of the places where we previously use
the locator window to get location information will now be updated to
get this from the tui_location_tracker.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* Makefile.in (SUBDIR_TUI_SRCS): Add tui/tui-location.c.
(HFILES_NO_SRCDIR): Add tui/tui-location.h.
* tui/tui-data.h (TUI_STATUS_WIN): Define.
(tui_locator_win_info_ptr): Delete declaration.
* tui/tui-disasm.c: Add 'tui/tui-location.h' include.
(tui_disasm_window::set_contents): Fetch state from tui_location
global.
(tui_get_begin_asm_address): Likewise.
* tui/tui-layout.c (tui_apply_current_layout): Remove special case
for locator window.
(get_locator_window): Delete.
(initialize_known_windows): Treat locator window just like all the
rest.
* tui/tui-source.c: Add 'tui/tui-location.h' include.
(tui_source_window::set_contents): Fetch state from tui_location
global.
(tui_source_window::showing_source_p): Likewise.
* tui/tui-stack.c: Add 'tui/tui-location.h' include.
(_locator): Delete.
(tui_locator_win_info_ptr): Delete.
(tui_locator_window::make_status_line): Fetch state from
tui_location global.
(tui_locator_window::rerender): Remove check of 'handle',
reindent function body.
(tui_locator_window::set_locator_fullname): Delete.
(tui_locator_window::set_locator_info): Delete.
(tui_update_locator_fullname): Delete.
(tui_show_frame_info): Likewise.
(tui_show_locator_content): Access window through TUI_STATUS_WIN.
* tui/tui-stack.h (tui_locator_window::set_locator_info): Moved to
tui/tui-location.h and renamed to
tui_location_tracker::set_location.
(tui_locator_window::set_locator_fullname): Moved to
tui/tui-location.h and renamed to
tui_location_tracker::set_fullname.
(tui_locator_window::full_name): Delete.
(tui_locator_window::proc_name): Delete.
(tui_locator_window::line_no): Delete.
(tui_locator_window::addr): Delete.
(tui_locator_window::gdbarch): Delete.
(tui_update_locator_fullname): Delete declaration.
* tui/tui-wingeneral.c (tui_refresh_all): Removed special handling
for locator window.
* tui/tui-winsource.c: Add 'tui/tui-location.h' include.
(tui_display_main): Call function on tui_location directly.
* tui/tui.h (enum tui_win_type): Add STATUS_WIN.
* tui/tui-location.c: New file.
* tui/tui-location.h: New file.
|
|
Compare pointers to nullptr, not 0. I also fixed a trailing
whitespace in the same function.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* tui/tui.c (tui_is_window_visible): Compare to nullptr, not 0.
|
|
tui_win_info::refresh_window simply calls wrefresh, which internally
does a doupdate.
This redraws the source background window without the source pad.
Then prefresh of the source pad draws the actual source code on top,
which flickers.
By changing this to wnoutrefresh, the actual drawing on the screen is
only done once in the following prefresh, without flickering.
gdb/ChangeLog:
2021-01-05 Hannes Domani <ssbssa@yahoo.de>
* tui/tui-winsource.c (tui_source_window_base::refresh_window):
Call wnoutrefresh instead of tui_win_info::refresh_window.
|
|
There a 2 spaces between the numbers and source code, but only one of
them was redrawn.
So if you increase the source window height, the second space keeps the
character of the border rectangle.
With this both spaces are redrawn, so the border rectangle character is
overwritten.
gdb/ChangeLog:
2021-01-05 Hannes Domani <ssbssa@yahoo.de>
* tui/tui-source.c (tui_source_window::show_line_number):
Redraw second space after line number.
|
|
The smaxrow and smaxcol parameters of prefresh are the bottom right corner
of the text area inclusive, not exclusive.
And if the source window grows bigger in height, the pad has to grow as
well.
gdb/ChangeLog:
2021-01-05 Hannes Domani <ssbssa@yahoo.de>
PR tui/26927
* tui/tui-winsource.c (tui_source_window_base::refresh_window):
Fix source pad size in prefresh.
(tui_source_window_base::show_source_content): Grow source pad
if necessary.
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
The locator win info is special because it is static, all the others are
created dynamically.
gdb/ChangeLog:
2020-11-29 Hannes Domani <ssbssa@yahoo.de>
PR tui/26973
* tui/tui-layout.c (tui_apply_current_layout): Don't delete the
static locator win info.
|
|
Many spots incorrectly use only spaces for indentation (for example,
there are a lot of spots in ada-lang.c). I've always found it awkward
when I needed to edit one of these spots: do I keep the original wrong
indentation, or do I fix it? What if the lines around it are also
wrong, do I fix them too? I probably don't want to fix them in the same
patch, to avoid adding noise to my patch.
So I propose to fix as much as possible once and for all (hopefully).
One typical counter argument for this is that it makes code archeology
more difficult, because git-blame will show this commit as the last
change for these lines. My counter counter argument is: when
git-blaming, you often need to do "blame the file at the parent commit"
anyway, to go past some other refactor that touched the line you are
interested in, but is not the change you are looking for. So you
already need a somewhat efficient way to do this.
Using some interactive tool, rather than plain git-blame, makes this
trivial. For example, I use "tig blame <file>", where going back past
the commit that changed the currently selected line is one keystroke.
It looks like Magit in Emacs does it too (though I've never used it).
Web viewers of Github and Gitlab do it too. My point is that it won't
really make archeology more difficult.
The other typical counter argument is that it will cause conflicts with
existing patches. That's true... but it's a one time cost, and those
are not conflicts that are difficult to resolve. I have also tried "git
rebase --ignore-whitespace", it seems to work well. Although that will
re-introduce the faulty indentation, so one needs to take care of fixing
the indentation in the patch after that (which is easy).
gdb/ChangeLog:
* aarch64-linux-tdep.c: Fix indentation.
* aarch64-ravenscar-thread.c: Fix indentation.
* aarch64-tdep.c: Fix indentation.
* aarch64-tdep.h: Fix indentation.
* ada-lang.c: Fix indentation.
* ada-lang.h: Fix indentation.
* ada-tasks.c: Fix indentation.
* ada-typeprint.c: Fix indentation.
* ada-valprint.c: Fix indentation.
* ada-varobj.c: Fix indentation.
* addrmap.c: Fix indentation.
* addrmap.h: Fix indentation.
* agent.c: Fix indentation.
* aix-thread.c: Fix indentation.
* alpha-bsd-nat.c: Fix indentation.
* alpha-linux-tdep.c: Fix indentation.
* alpha-mdebug-tdep.c: Fix indentation.
* alpha-nbsd-tdep.c: Fix indentation.
* alpha-obsd-tdep.c: Fix indentation.
* alpha-tdep.c: Fix indentation.
* amd64-bsd-nat.c: Fix indentation.
* amd64-darwin-tdep.c: Fix indentation.
* amd64-linux-nat.c: Fix indentation.
* amd64-linux-tdep.c: Fix indentation.
* amd64-nat.c: Fix indentation.
* amd64-obsd-tdep.c: Fix indentation.
* amd64-tdep.c: Fix indentation.
* amd64-windows-tdep.c: Fix indentation.
* annotate.c: Fix indentation.
* arc-tdep.c: Fix indentation.
* arch-utils.c: Fix indentation.
* arch/arm-get-next-pcs.c: Fix indentation.
* arch/arm.c: Fix indentation.
* arm-linux-nat.c: Fix indentation.
* arm-linux-tdep.c: Fix indentation.
* arm-nbsd-tdep.c: Fix indentation.
* arm-pikeos-tdep.c: Fix indentation.
* arm-tdep.c: Fix indentation.
* arm-tdep.h: Fix indentation.
* arm-wince-tdep.c: Fix indentation.
* auto-load.c: Fix indentation.
* auxv.c: Fix indentation.
* avr-tdep.c: Fix indentation.
* ax-gdb.c: Fix indentation.
* ax-general.c: Fix indentation.
* bfin-linux-tdep.c: Fix indentation.
* block.c: Fix indentation.
* block.h: Fix indentation.
* blockframe.c: Fix indentation.
* bpf-tdep.c: Fix indentation.
* break-catch-sig.c: Fix indentation.
* break-catch-syscall.c: Fix indentation.
* break-catch-throw.c: Fix indentation.
* breakpoint.c: Fix indentation.
* breakpoint.h: Fix indentation.
* bsd-uthread.c: Fix indentation.
* btrace.c: Fix indentation.
* build-id.c: Fix indentation.
* buildsym-legacy.h: Fix indentation.
* buildsym.c: Fix indentation.
* c-typeprint.c: Fix indentation.
* c-valprint.c: Fix indentation.
* c-varobj.c: Fix indentation.
* charset.c: Fix indentation.
* cli/cli-cmds.c: Fix indentation.
* cli/cli-decode.c: Fix indentation.
* cli/cli-decode.h: Fix indentation.
* cli/cli-script.c: Fix indentation.
* cli/cli-setshow.c: Fix indentation.
* coff-pe-read.c: Fix indentation.
* coffread.c: Fix indentation.
* compile/compile-cplus-types.c: Fix indentation.
* compile/compile-object-load.c: Fix indentation.
* compile/compile-object-run.c: Fix indentation.
* completer.c: Fix indentation.
* corefile.c: Fix indentation.
* corelow.c: Fix indentation.
* cp-abi.h: Fix indentation.
* cp-namespace.c: Fix indentation.
* cp-support.c: Fix indentation.
* cp-valprint.c: Fix indentation.
* cris-linux-tdep.c: Fix indentation.
* cris-tdep.c: Fix indentation.
* darwin-nat-info.c: Fix indentation.
* darwin-nat.c: Fix indentation.
* darwin-nat.h: Fix indentation.
* dbxread.c: Fix indentation.
* dcache.c: Fix indentation.
* disasm.c: Fix indentation.
* dtrace-probe.c: Fix indentation.
* dwarf2/abbrev.c: Fix indentation.
* dwarf2/attribute.c: Fix indentation.
* dwarf2/expr.c: Fix indentation.
* dwarf2/frame.c: Fix indentation.
* dwarf2/index-cache.c: Fix indentation.
* dwarf2/index-write.c: Fix indentation.
* dwarf2/line-header.c: Fix indentation.
* dwarf2/loc.c: Fix indentation.
* dwarf2/macro.c: Fix indentation.
* dwarf2/read.c: Fix indentation.
* dwarf2/read.h: Fix indentation.
* elfread.c: Fix indentation.
* eval.c: Fix indentation.
* event-top.c: Fix indentation.
* exec.c: Fix indentation.
* exec.h: Fix indentation.
* expprint.c: Fix indentation.
* f-lang.c: Fix indentation.
* f-typeprint.c: Fix indentation.
* f-valprint.c: Fix indentation.
* fbsd-nat.c: Fix indentation.
* fbsd-tdep.c: Fix indentation.
* findvar.c: Fix indentation.
* fork-child.c: Fix indentation.
* frame-unwind.c: Fix indentation.
* frame-unwind.h: Fix indentation.
* frame.c: Fix indentation.
* frv-linux-tdep.c: Fix indentation.
* frv-tdep.c: Fix indentation.
* frv-tdep.h: Fix indentation.
* ft32-tdep.c: Fix indentation.
* gcore.c: Fix indentation.
* gdb_bfd.c: Fix indentation.
* gdbarch.sh: Fix indentation.
* gdbarch.c: Re-generate
* gdbarch.h: Re-generate.
* gdbcore.h: Fix indentation.
* gdbthread.h: Fix indentation.
* gdbtypes.c: Fix indentation.
* gdbtypes.h: Fix indentation.
* glibc-tdep.c: Fix indentation.
* gnu-nat.c: Fix indentation.
* gnu-nat.h: Fix indentation.
* gnu-v2-abi.c: Fix indentation.
* gnu-v3-abi.c: Fix indentation.
* go32-nat.c: Fix indentation.
* guile/guile-internal.h: Fix indentation.
* guile/scm-cmd.c: Fix indentation.
* guile/scm-frame.c: Fix indentation.
* guile/scm-iterator.c: Fix indentation.
* guile/scm-math.c: Fix indentation.
* guile/scm-ports.c: Fix indentation.
* guile/scm-pretty-print.c: Fix indentation.
* guile/scm-value.c: Fix indentation.
* h8300-tdep.c: Fix indentation.
* hppa-linux-nat.c: Fix indentation.
* hppa-linux-tdep.c: Fix indentation.
* hppa-nbsd-nat.c: Fix indentation.
* hppa-nbsd-tdep.c: Fix indentation.
* hppa-obsd-nat.c: Fix indentation.
* hppa-tdep.c: Fix indentation.
* hppa-tdep.h: Fix indentation.
* i386-bsd-nat.c: Fix indentation.
* i386-darwin-nat.c: Fix indentation.
* i386-darwin-tdep.c: Fix indentation.
* i386-dicos-tdep.c: Fix indentation.
* i386-gnu-nat.c: Fix indentation.
* i386-linux-nat.c: Fix indentation.
* i386-linux-tdep.c: Fix indentation.
* i386-nto-tdep.c: Fix indentation.
* i386-obsd-tdep.c: Fix indentation.
* i386-sol2-nat.c: Fix indentation.
* i386-tdep.c: Fix indentation.
* i386-tdep.h: Fix indentation.
* i386-windows-tdep.c: Fix indentation.
* i387-tdep.c: Fix indentation.
* i387-tdep.h: Fix indentation.
* ia64-libunwind-tdep.c: Fix indentation.
* ia64-libunwind-tdep.h: Fix indentation.
* ia64-linux-nat.c: Fix indentation.
* ia64-linux-tdep.c: Fix indentation.
* ia64-tdep.c: Fix indentation.
* ia64-tdep.h: Fix indentation.
* ia64-vms-tdep.c: Fix indentation.
* infcall.c: Fix indentation.
* infcmd.c: Fix indentation.
* inferior.c: Fix indentation.
* infrun.c: Fix indentation.
* iq2000-tdep.c: Fix indentation.
* language.c: Fix indentation.
* linespec.c: Fix indentation.
* linux-fork.c: Fix indentation.
* linux-nat.c: Fix indentation.
* linux-tdep.c: Fix indentation.
* linux-thread-db.c: Fix indentation.
* lm32-tdep.c: Fix indentation.
* m2-lang.c: Fix indentation.
* m2-typeprint.c: Fix indentation.
* m2-valprint.c: Fix indentation.
* m32c-tdep.c: Fix indentation.
* m32r-linux-tdep.c: Fix indentation.
* m32r-tdep.c: Fix indentation.
* m68hc11-tdep.c: Fix indentation.
* m68k-bsd-nat.c: Fix indentation.
* m68k-linux-nat.c: Fix indentation.
* m68k-linux-tdep.c: Fix indentation.
* m68k-tdep.c: Fix indentation.
* machoread.c: Fix indentation.
* macrocmd.c: Fix indentation.
* macroexp.c: Fix indentation.
* macroscope.c: Fix indentation.
* macrotab.c: Fix indentation.
* macrotab.h: Fix indentation.
* main.c: Fix indentation.
* mdebugread.c: Fix indentation.
* mep-tdep.c: Fix indentation.
* mi/mi-cmd-catch.c: Fix indentation.
* mi/mi-cmd-disas.c: Fix indentation.
* mi/mi-cmd-env.c: Fix indentation.
* mi/mi-cmd-stack.c: Fix indentation.
* mi/mi-cmd-var.c: Fix indentation.
* mi/mi-cmds.c: Fix indentation.
* mi/mi-main.c: Fix indentation.
* mi/mi-parse.c: Fix indentation.
* microblaze-tdep.c: Fix indentation.
* minidebug.c: Fix indentation.
* minsyms.c: Fix indentation.
* mips-linux-nat.c: Fix indentation.
* mips-linux-tdep.c: Fix indentation.
* mips-nbsd-tdep.c: Fix indentation.
* mips-tdep.c: Fix indentation.
* mn10300-linux-tdep.c: Fix indentation.
* mn10300-tdep.c: Fix indentation.
* moxie-tdep.c: Fix indentation.
* msp430-tdep.c: Fix indentation.
* namespace.h: Fix indentation.
* nat/fork-inferior.c: Fix indentation.
* nat/gdb_ptrace.h: Fix indentation.
* nat/linux-namespaces.c: Fix indentation.
* nat/linux-osdata.c: Fix indentation.
* nat/netbsd-nat.c: Fix indentation.
* nat/x86-dregs.c: Fix indentation.
* nbsd-nat.c: Fix indentation.
* nbsd-tdep.c: Fix indentation.
* nios2-linux-tdep.c: Fix indentation.
* nios2-tdep.c: Fix indentation.
* nto-procfs.c: Fix indentation.
* nto-tdep.c: Fix indentation.
* objfiles.c: Fix indentation.
* objfiles.h: Fix indentation.
* opencl-lang.c: Fix indentation.
* or1k-tdep.c: Fix indentation.
* osabi.c: Fix indentation.
* osabi.h: Fix indentation.
* osdata.c: Fix indentation.
* p-lang.c: Fix indentation.
* p-typeprint.c: Fix indentation.
* p-valprint.c: Fix indentation.
* parse.c: Fix indentation.
* ppc-linux-nat.c: Fix indentation.
* ppc-linux-tdep.c: Fix indentation.
* ppc-nbsd-nat.c: Fix indentation.
* ppc-nbsd-tdep.c: Fix indentation.
* ppc-obsd-nat.c: Fix indentation.
* ppc-ravenscar-thread.c: Fix indentation.
* ppc-sysv-tdep.c: Fix indentation.
* ppc64-tdep.c: Fix indentation.
* printcmd.c: Fix indentation.
* proc-api.c: Fix indentation.
* producer.c: Fix indentation.
* producer.h: Fix indentation.
* prologue-value.c: Fix indentation.
* prologue-value.h: Fix indentation.
* psymtab.c: Fix indentation.
* python/py-arch.c: Fix indentation.
* python/py-bpevent.c: Fix indentation.
* python/py-event.c: Fix indentation.
* python/py-event.h: Fix indentation.
* python/py-finishbreakpoint.c: Fix indentation.
* python/py-frame.c: Fix indentation.
* python/py-framefilter.c: Fix indentation.
* python/py-inferior.c: Fix indentation.
* python/py-infthread.c: Fix indentation.
* python/py-objfile.c: Fix indentation.
* python/py-prettyprint.c: Fix indentation.
* python/py-registers.c: Fix indentation.
* python/py-signalevent.c: Fix indentation.
* python/py-stopevent.c: Fix indentation.
* python/py-stopevent.h: Fix indentation.
* python/py-threadevent.c: Fix indentation.
* python/py-tui.c: Fix indentation.
* python/py-unwind.c: Fix indentation.
* python/py-value.c: Fix indentation.
* python/py-xmethods.c: Fix indentation.
* python/python-internal.h: Fix indentation.
* python/python.c: Fix indentation.
* ravenscar-thread.c: Fix indentation.
* record-btrace.c: Fix indentation.
* record-full.c: Fix indentation.
* record.c: Fix indentation.
* reggroups.c: Fix indentation.
* regset.h: Fix indentation.
* remote-fileio.c: Fix indentation.
* remote.c: Fix indentation.
* reverse.c: Fix indentation.
* riscv-linux-tdep.c: Fix indentation.
* riscv-ravenscar-thread.c: Fix indentation.
* riscv-tdep.c: Fix indentation.
* rl78-tdep.c: Fix indentation.
* rs6000-aix-tdep.c: Fix indentation.
* rs6000-lynx178-tdep.c: Fix indentation.
* rs6000-nat.c: Fix indentation.
* rs6000-tdep.c: Fix indentation.
* rust-lang.c: Fix indentation.
* rx-tdep.c: Fix indentation.
* s12z-tdep.c: Fix indentation.
* s390-linux-tdep.c: Fix indentation.
* score-tdep.c: Fix indentation.
* ser-base.c: Fix indentation.
* ser-mingw.c: Fix indentation.
* ser-uds.c: Fix indentation.
* ser-unix.c: Fix indentation.
* serial.c: Fix indentation.
* sh-linux-tdep.c: Fix indentation.
* sh-nbsd-tdep.c: Fix indentation.
* sh-tdep.c: Fix indentation.
* skip.c: Fix indentation.
* sol-thread.c: Fix indentation.
* solib-aix.c: Fix indentation.
* solib-darwin.c: Fix indentation.
* solib-frv.c: Fix indentation.
* solib-svr4.c: Fix indentation.
* solib.c: Fix indentation.
* source.c: Fix indentation.
* sparc-linux-tdep.c: Fix indentation.
* sparc-nbsd-tdep.c: Fix indentation.
* sparc-obsd-tdep.c: Fix indentation.
* sparc-ravenscar-thread.c: Fix indentation.
* sparc-tdep.c: Fix indentation.
* sparc64-linux-tdep.c: Fix indentation.
* sparc64-nbsd-tdep.c: Fix indentation.
* sparc64-obsd-tdep.c: Fix indentation.
* sparc64-tdep.c: Fix indentation.
* stabsread.c: Fix indentation.
* stack.c: Fix indentation.
* stap-probe.c: Fix indentation.
* stubs/ia64vms-stub.c: Fix indentation.
* stubs/m32r-stub.c: Fix indentation.
* stubs/m68k-stub.c: Fix indentation.
* stubs/sh-stub.c: Fix indentation.
* stubs/sparc-stub.c: Fix indentation.
* symfile-mem.c: Fix indentation.
* symfile.c: Fix indentation.
* symfile.h: Fix indentation.
* symmisc.c: Fix indentation.
* symtab.c: Fix indentation.
* symtab.h: Fix indentation.
* target-float.c: Fix indentation.
* target.c: Fix indentation.
* target.h: Fix indentation.
* tic6x-tdep.c: Fix indentation.
* tilegx-linux-tdep.c: Fix indentation.
* tilegx-tdep.c: Fix indentation.
* top.c: Fix indentation.
* tracefile-tfile.c: Fix indentation.
* tracepoint.c: Fix indentation.
* tui/tui-disasm.c: Fix indentation.
* tui/tui-io.c: Fix indentation.
* tui/tui-regs.c: Fix indentation.
* tui/tui-stack.c: Fix indentation.
* tui/tui-win.c: Fix indentation.
* tui/tui-winsource.c: Fix indentation.
* tui/tui.c: Fix indentation.
* typeprint.c: Fix indentation.
* ui-out.h: Fix indentation.
* unittests/copy_bitwise-selftests.c: Fix indentation.
* unittests/memory-map-selftests.c: Fix indentation.
* utils.c: Fix indentation.
* v850-tdep.c: Fix indentation.
* valarith.c: Fix indentation.
* valops.c: Fix indentation.
* valprint.c: Fix indentation.
* valprint.h: Fix indentation.
* value.c: Fix indentation.
* value.h: Fix indentation.
* varobj.c: Fix indentation.
* vax-tdep.c: Fix indentation.
* windows-nat.c: Fix indentation.
* windows-tdep.c: Fix indentation.
* xcoffread.c: Fix indentation.
* xml-syscall.c: Fix indentation.
* xml-tdesc.c: Fix indentation.
* xstormy16-tdep.c: Fix indentation.
* xtensa-config.c: Fix indentation.
* xtensa-linux-nat.c: Fix indentation.
* xtensa-linux-tdep.c: Fix indentation.
* xtensa-tdep.c: Fix indentation.
gdbserver/ChangeLog:
* ax.cc: Fix indentation.
* dll.cc: Fix indentation.
* inferiors.h: Fix indentation.
* linux-low.cc: Fix indentation.
* linux-nios2-low.cc: Fix indentation.
* linux-ppc-ipa.cc: Fix indentation.
* linux-ppc-low.cc: Fix indentation.
* linux-x86-low.cc: Fix indentation.
* linux-xtensa-low.cc: Fix indentation.
* regcache.cc: Fix indentation.
* server.cc: Fix indentation.
* tracepoint.cc: Fix indentation.
gdbsupport/ChangeLog:
* common-exceptions.h: Fix indentation.
* event-loop.cc: Fix indentation.
* fileio.cc: Fix indentation.
* filestuff.cc: Fix indentation.
* gdb-dlfcn.cc: Fix indentation.
* gdb_string_view.h: Fix indentation.
* job-control.cc: Fix indentation.
* signals.cc: Fix indentation.
Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
|
|
PR tui/26719 points out that switching the focus can erase the TUI
source window. This is a regression introduced by the patch to switch
the source window to using a pad.
This patch fixes the bug by arranging to call prefresh whenever the
window is refreshed.
2020-10-19 Tom Tromey <tromey@adacore.com>
PR tui/26719
* tui/tui-winsource.h (struct tui_source_window_base)
<refresh_window>: Rename from refresh_pad.
* tui/tui-winsource.c (tui_source_window_base::refresh_window):
Rename from refresh_pad.
(tui_source_window_base::show_source_content)
(tui_source_window_base::do_scroll_horizontal): Update.
gdb/testsuite/ChangeLog
2020-10-19 Tom Tromey <tromey@adacore.com>
PR tui/26719
* gdb.tui/list.exp: Check source window contents after focus
change.
|
|
Assign names to async event/signal handlers. They will be used in debug
messages when file handlers are invoked.
Unlike in the previous patch, the names are not copied in the structure,
since we don't need to (all names are string literals for the moment).
gdb/ChangeLog:
* async-event.h (create_async_signal_handler): Add name
parameter.
(create_async_event_handler): Likewise.
* async-event.c (struct async_signal_handler) <name>: New field.
(struct async_event_handler) <name>: New field.
(create_async_signal_handler): Assign name.
(create_async_event_handler): Assign name.
* event-top.c (async_init_signals): Pass name when creating
handler.
* infrun.c (_initialize_infrun): Likewise.
* record-btrace.c (record_btrace_push_target): Likewise.
* record-full.c (record_full_open): Likewise.
* remote-notif.c (remote_notif_state_allocate): Likewise.
* remote.c (remote_target::open_1): Likewise.
* tui/tui-win.c (tui_initialize_win): Likewise.
Change-Id: Icd9d9f775542ae5fc2cd148c12f481e7885936d5
|
|
Assign names to event loop file handlers. They will be used in debug
messages when file handlers are invoked.
In GDB, each UI used to get its own unique number, until commit
cbe256847e19 ("Remove ui::num"). Re-introduce this field, and use it to
make a unique name for the handler.
I'm not too sure what goes on in ser-base.c, all I know is that it's
what is used when debugging remotely. I've just named the main handler
"serial". It would be good to have unique names there too. For instance
when debugging with two different remote connections, we'd ideally want
the handlers to have unique names. I didn't do it in this patch though.
gdb/ChangeLog:
* async-event.c (initialize_async_signal_handlers): Pass name to
add_file_handler
* event-top.c (ui_register_input_event_handler): Likewise.
* linux-nat.c (linux_nat_target::async): Likewise.
* run-on-main-thread.c (_initialize_run_on_main_thread):
Likewise
* ser-base.c (reschedule): Likewise.
(ser_base_async): Likewise.
* tui/tui-io.c: Likewise.
* top.h (struct ui) <num>: New field.
* top.c (highest_ui_num): New variable.
(ui::ui): Initialize num.
gdbserver/ChangeLog:
* linux-low.cc (linux_process_target::async): Pass name to
add_file_handler.
* remote-utils.cc (handle_accept_event): Likewise.
(remote_open): Likewise.
gdbsupport/ChangeLog:
* event-loop.h (add_file_handler): Add "name" parameter.
* event-loop.cc (struct file_handler) <name>: New field.
(create_file_handler): Add "name" parameter, assign it to file
handler.
(add_file_handler): Add "name" parameter.
Change-Id: I9f1545f73888ebb6778eb653a618ca44d105f92c
|
|
This removes the target_has_registers object-like macro, replacing it
with the underlying function.
gdb/ChangeLog
2020-09-28 Tom Tromey <tom@tromey.com>
* tui/tui-regs.c (tui_get_register)
(tui_data_window::show_registers): Update.
* thread.c (scoped_restore_current_thread::restore)
(scoped_restore_current_thread::scoped_restore_current_thread):
Update.
* regcache-dump.c (regcache_print): Update.
* python/py-finishbreakpoint.c (bpfinishpy_detect_out_scope_cb):
Update.
* mi/mi-main.c (mi_cmd_data_write_register_values): Update.
* mep-tdep.c (current_me_module, current_options): Update.
* linux-thread-db.c (thread_db_load): Update.
* infcmd.c (registers_info, info_vector_command)
(info_float_command): Update.
* ia64-tdep.c (ia64_frame_prev_register)
(ia64_sigtramp_frame_prev_register): Update.
* ia64-libunwind-tdep.c (libunwind_frame_prev_register): Update.
* gcore.c (derive_stack_segment): Update.
* frame.c (get_current_frame, has_stack_frames): Update.
* findvar.c (language_defn::read_var_value): Update.
* arm-tdep.c (arm_pc_is_thumb): Update.
* target.c (target_has_registers): Rename from
target_has_registers_1.
* target.h (target_has_registers): Remove macro.
(target_has_registers): Rename from target_has_registers_1.
|
|
This removes the target_has_stack object-like macro, replacing it with
the underlying function.
gdb/ChangeLog
2020-09-28 Tom Tromey <tom@tromey.com>
* windows-tdep.c (tlb_make_value): Update.
* tui/tui-regs.c (tui_data_window::show_registers): Update.
* thread.c (scoped_restore_current_thread::restore)
(scoped_restore_current_thread::scoped_restore_current_thread)
(thread_command): Update.
* stack.c (backtrace_command_1, frame_apply_level_command)
(frame_apply_all_command, frame_apply_command): Update.
* infrun.c (siginfo_make_value, restore_infcall_control_state):
Update.
* gcore.c (derive_stack_segment): Update.
* frame.c (get_current_frame, has_stack_frames): Update.
* auxv.c (info_auxv_command): Update.
* ada-tasks.c (ada_build_task_list): Update.
* target.c (target_has_stack): Rename from target_has_stack_1.
* target.h (target_has_stack): Remove macro.
(target_has_stack): Rename from target_has_stack_1.
|
|
This removes the target_has_memory object-like macro, replacing it
with the underlying function.
gdb/ChangeLog
2020-09-28 Tom Tromey <tom@tromey.com>
* target.c (target_has_memory): Rename from target_has_memory_1.
* tui/tui-regs.c (tui_data_window::show_registers): Update.
* thread.c (scoped_restore_current_thread::restore)
(scoped_restore_current_thread::scoped_restore_current_thread):
Update.
* frame.c (get_current_frame, has_stack_frames): Update.
* target.h (target_has_memory): Remove macro.
(target_has_memory): Rename from target_has_memory_1.
|
|
This rewrites tui_puts. It now writes as many bytes as possible in a
call to waddnstr, letting curses handle multi-byte sequences properly.
Note that tui_puts_internal remains. It is needed to handle computing
the start line of the readline prompt, which is difficult to do
properly in the case where redisplaying can also cause the command
window to scroll. This might be possible to implement by reverting to
single "character" output, by using mbsrtowcs for its side effects to
find character boundaries in the input. I have not attempted this.
gdb/ChangeLog
2020-09-27 Tom Tromey <tom@tromey.com>
PR tui/25342:
* tui/tui-io.c (tui_puts): Rewrite. Move earlier.
|
|
This changes tui_copy_source_line to use ISCNTRL. This lets it work
more nicely with UTF-8 input. Note that this still won't work for
stateful multi-byte encodings; for that much more work would be
required. However, I think this patch does not make gdb any worse in
this scenario.
gdb/ChangeLog
2020-09-27 Tom Tromey <tom@tromey.com>
PR tui/25342:
* tui/tui-winsource.c (tui_copy_source_line): Use ISNCTRL.
|
|
This changes the TUI source and disassembly windows to use a curses
pad for their text. This is an important step toward properly
handling non-ASCII characters, because it makes it easy to scroll
horizontally without needing gdb to also understand multi-byte
character boundaries -- this can be wholly delegated to curses.
Horizontal scrolling is probably also faster now, because no
re-rendering is required.
gdb/ChangeLog
2020-09-27 Tom Tromey <tom@tromey.com>
* unittests/tui-selftests.c: Update.
* tui/tui-winsource.h (struct tui_source_window_base)
<extra_margin, show_line_number, refresh_pad>: New methods.
<m_max_length, m_pad>: New members.
(tui_copy_source_line): Update.
* tui/tui-winsource.c (tui_copy_source_line): Remove line_no,
first_col, line_width, ndigits parameters. Add length.
(tui_source_window_base::show_source_line): Write to pad. Line
number now 0-based.
(tui_source_window_base::refresh_pad): New method.
(tui_source_window_base::show_source_content): Write to pad. Call
refresh_pad.
(tui_source_window_base::do_scroll_horizontal): Call refresh_pad,
not refill.
(tui_source_window_base::update_exec_info): Call
show_line_number.
* tui/tui-source.h (struct tui_source_window) <extra_margin>: New
method.
<m_digits>: New member.
* tui/tui-source.c (tui_source_window::set_contents): Set m_digits
and m_max_length.
(tui_source_window::show_line_number): New method.
* tui/tui-io.h (tui_puts): Fix comment.
* tui/tui-disasm.c (tui_disasm_window::set_contents): Set
m_max_length.
|
|
This removes a call to show_source_line from tui_source_window_base.
This call isn't needed because this function already calls the
'refill' method if the state changed.
gdb/ChangeLog
2020-09-27 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c
(tui_source_window_base::set_is_exec_point_at): Don't call
show_source_line.
|
|
PR tui/26638 notes that the C-x o binding can put the focus on the
locator window. However, this is not useful and did not happen
historically. This patch changes the TUI to skip this window when
switching focus.
gdb/ChangeLog
2020-09-24 Tom Tromey <tromey@adacore.com>
PR tui/26638:
* tui/tui-stack.h (struct tui_locator_window) <can_focus>: New
method.
* tui/tui-data.h (struct tui_win_info) <can_focus>: New method.
* tui/tui-data.c (tui_next_win): Exclude non-focusable windows.
(tui_prev_win): Rewrite.
gdb/testsuite/ChangeLog
2020-09-24 Tom Tromey <tromey@adacore.com>
PR tui/26638:
* gdb.tui/list.exp: Check output of "focus next".
|
|
When compiling with CFLAGS/CXXFLAGS="-O0 -g -Wall" and using g++ 11.0.0, we
run into:
...
src/gdb/tui/tui-winsource.c: In function \
'void tui_update_all_breakpoint_info(breakpoint*)':
src/gdb/tui/tui-winsource.c:427:58: warning: '<unknown>' may be used \
uninitialized [-Wmaybe-uninitialized]
427 | for (tui_source_window_base *win : tui_source_windows ())
| ^
In file included from src/gdb/tui/tui-winsource.c:38:
src/gdb/tui/tui-winsource.h:236:30: note: by argument 1 of type \
'const tui_source_windows*' to 'tui_source_window_iterator \
tui_source_windows::begin() const' declared here
236 | tui_source_window_iterator begin () const
| ^~~~~
src/gdb/tui/tui-winsource.c:427:58: note: '<anonymous>' declared here
427 | for (tui_source_window_base *win : tui_source_windows ())
| ^
...
The warning doesn't make sense for an empty struct, PR gcc/96295 has been
filed about that.
For now, work around the warning by defining a default constructor.
Build on x86_64-linux.
gdb/ChangeLog:
2020-07-23 Tom de Vries <tdevries@suse.de>
PR tui/26282
* tui/tui-winsource.h (struct tui_source_windows::tui_source_windows):
New default constructor.
|
|
When building gdb with CFLAGS=-std=gnu17 and CXXFLAGS=-std=gnu++17 and running
test-case gdb.tui/new-layout.exp, we run into:
...
UNRESOLVED: gdb.tui/new-layout.exp: left window box after shrink (ll corner)
FAIL: gdb.tui/new-layout.exp: right window box after shrink (ll corner)
...
In a minimal form, we run into an abort when issuing a winheight command:
...
$ gdb -tui -ex "winheight src - 5"
<tui stuff>
Aborted (core dumped)
$
...
with this backtrace at the abort:
...
\#0 0x0000000000438db0 in std::char_traits<char>::length (__s=0x0)
at /usr/include/c++/9/bits/char_traits.h:335
\#1 0x000000000043b72e in std::basic_string_view<char, \
std::char_traits<char> >::basic_string_view (this=0x7fffffffd4f0, \
__str=0x0) at /usr/include/c++/9/string_view:124
\#2 0x000000000094971b in tui_partial_win_by_name (name="src")
at src/gdb/tui/tui-win.c:663
...
due to a NULL comparison which constructs a string_view object from NULL:
...
657 /* Answer the window represented by name. */
658 static struct tui_win_info *
659 tui_partial_win_by_name (gdb::string_view name)
660 {
661 struct tui_win_info *best = nullptr;
662
663 if (name != NULL)
...
In gdbsupport/gdb_string_view.h, we either use:
- gdb's copy of libstdc++-v3/include/experimental/string_view, or
- the standard implementation of string_view, when built with C++17 or later
(which in gcc's case comes from libstdc++-v3/include/std/string_view)
In the first case, there's support for constructing a string_view from a NULL
pointer:
...
/*constexpr*/ basic_string_view(const _CharT* __str)
: _M_len{__str == nullptr ? 0 : traits_type::length(__str)},
_M_str{__str}
{ }
...
but in the second case, there's not:
...
__attribute__((__nonnull__)) constexpr
basic_string_view(const _CharT* __str) noexcept
: _M_len{traits_type::length(__str)},
_M_str{__str}
{ }
...
Fix this by removing the NULL comparison altogether.
Build on x86_64-linux with CFLAGS=-std=gnu17 and CXXFLAGS=-std=gnu++17, and
tested.
gdb/ChangeLog:
2020-07-06 Tom de Vries <tdevries@suse.de>
PR tui/26205
* tui/tui-win.c (tui_partial_win_by_name): Don't test for NULL name.
|
|
It seemed cleaner to me for tui_win_info::name to be pure virtual.
This meant adding a name method to the locator window; but this too
seems like an improvement.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
* tui/tui-data.h (struct tui_win_info) <name>: Now pure virtual.
* tui/tui-stack.h (struct tui_locator_window) <name>: New method.
|
|
This merges the tui_gen_win_info base class with tui_win_info;
renaming the resulting class to tui_win_info.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
* tui/tui-wingeneral.c (tui_win_info::refresh_window): Move from
tui_gen_win_info.
(tui_win_info::make_window): Merge with
tui_gen_win_info::make_window.
(tui_win_info::make_visible): Move from tui_gen_win_info.
* tui/tui-win.c (tui_win_info::max_width): Move from
tui_gen_win_info.
* tui/tui-layout.h (class tui_layout_window) <m_window>: Change
type.
<window_factory>: Likewise.
* tui/tui-layout.c (tui_win_info::resize): Move from
tui_gen_win_info.
(make_standard_window): Change return type.
(get_locator_window, tui_get_window_by_name): Likewise.
(tui_layout_window::apply): Remove a cast.
* tui/tui-data.h (MIN_WIN_HEIGHT): Move earlier.
(struct tui_win_info): Merge with tui_gen_win_info.
(struct tui_gen_win_info): Remove.
|
|
tui_locator_window is the last remaining concrete child class of
tui_gen_win_info. It seems a bit cleaner to me to flatten the
hierarchy a bit; this patch prepares for that by changing
tui_locator_window to derive from tui_win_info.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
* tui/tui-stack.h (struct tui_locator_window): Derive from
tui_win_info.
<do_scroll_horizontal, do_scroll_vertical>: New methods.
<can_box>: New method.
|
|
The tui_locator_window constructor initializes the first character of
two of its members. However, this is actually an error, since these
were changed to be std::string. This removes the erroneous code.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
* tui/tui-stack.h (struct tui_locator_window): Remove body.
|
|
There's no deep reason that tui_data_item_window should derive from
tui_gen_win_info -- it currently uses a curses window to render, but
that isn't truly needed, and it adds some hacks to other parts of the
TUI.
This patch changes tui_data_item_window so that it doesn't have a base
class, and updates the register window. This simplifies the code and
enables a subsequent cleanup.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
* tui/tui-regs.c (tui_data_window::display_registers_from)
(tui_data_window::display_registers_from)
(tui_data_window::first_data_item_displayed)
(tui_data_window::delete_data_content_windows): Update.
(tui_data_window::refresh_window, tui_data_window::no_refresh):
Remove.
(tui_data_window::check_register_values): Update.
(tui_data_item_window::rerender): Add parameters. Update.
(tui_data_item_window::refresh_window): Remove.
* tui/tui-data.h (struct tui_gen_win_info) <no_refresh>: No longer
virtual.
* tui/tui-regs.h (struct tui_data_item_window): Don't derive from
tui_gen_win_info.
<refresh_window, max_height, min_height>: Remove.
<rerender>: Add parameters.
<x, y, visible>: New members.
(struct tui_data_window) <refresh_window, no_refresh>: Remove.
<m_item_width>: New member.
|
|
tui_data_item_window::item_no is misnamed -- it only can be used for a
register, but it references a "display" number as well. (Based on
other comments I've seen in the past -- most since deleted -- I think
there were plans at one point to display variables in this window as
well. However, this was never implemented.)
This patch renames this member to be more correct.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
* tui/tui-regs.c (tui_data_window::show_register_group)
(tui_data_window::check_register_values): Update.
* tui/tui-regs.h (struct tui_data_item_window) <regno>: Rename
from item_no.
|
|
tui_data_window::show_register_group had a useless "if" -- the
condition could never be false. This patch removes it.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
* tui/tui-regs.c (tui_data_window::show_register_group): Remove
useless "if".
|
|
The "name" member of tui_data_window was set, but never used. This
removes it.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
* tui/tui-regs.c (tui_data_window::show_register_group): Update.
* tui/tui-regs.h (struct tui_data_item_window) <name>: Remove.
|
|
This moves some code out of tui-data.h, to more closely related
places. Some unused forward declarations are also removed.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
* tui/tui-stack.c (SINGLE_KEY): Move from tui-data.h
* tui/tui-winsource.h (enum tui_line_or_address_kind)
(struct tui_line_or_address): Move from tui-data.h.
* tui/tui-win.c (DEFAULT_TAB_LEN): Move from tui-data.h.
* tui/tui-data.h (DEFAULT_TAB_LEN): Move to tui-win.c.
(tui_cmd_window, tui_source_window_base, tui_source_window)
(tui_disasm_window): Don't declare.
(enum tui_line_or_address_kind, struct tui_line_or_address): Move
to tui-winsource.h.
(SINGLE_KEY): Move to tui-stack.c.
|
|
tui_expand_tabs only has a single caller. This patch removes this
function, in favor of a tab-expanding variant of string_file. This
simplifies the code somewhat.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
* tui/tui-regs.h (struct tui_data_item_window) <content>: Now a
std::string.
* tui/tui-regs.c (class tab_expansion_file): New.
(tab_expansion_file::write): New method.
(tui_register_format): Change return type. Use
tab_expansion_file.
(tui_get_register, tui_data_window::display_registers_from)
(tui_data_item_window::rerender): Update.
* tui/tui-io.h (tui_expand_tabs): Don't declare.
* tui/tui-io.c (tui_expand_tabs): Remove.
|
|
tui_reggroup_completer has an "XXXX" comment suggesting the use of
complete_on_enum. This patch implements this suggestion.
gdb/ChangeLog
2020-07-01 Tom Tromey <tom@tromey.com>
* tui/tui-regs.c (tui_reggroup_completer): Use complete_on_enum.
|
|
I found some unnecessary declarations (and one unused macro) in the
TUI. This patch removes them.
gdb/ChangeLog
2020-06-17 Tom Tromey <tom@tromey.com>
* tui/tui-win.h (tui_scroll_forward, tui_scroll_backward)
(tui_scroll_left, tui_scroll_right, struct tui_win_info): Don't
declare.
* tui/tui-data.h (MIN_CMD_WIN_HEIGHT): Remove.
|
|
Christian pointed out that tui-layout.c hard-codes various window
names. This patch changes the code to use the macros from tui-data.h
instead. For each window, I searched for uses of the name; but I only
found any in tui-layout.c. This also adds a new macro to account for
the "status" window.
gdb/ChangeLog
2020-06-16 Tom Tromey <tom@tromey.com>
* tui/tui-data.h (STATUS_NAME): New macro.
* tui/tui-layout.c (tui_remove_some_windows)
(initialize_known_windows, tui_register_window)
(tui_layout_split::remove_windows, initialize_layouts)
(tui_new_layout_command): Don't use hard-coded window names.
|
|
PR tui/25348 points out that, when "gdb -tui" is used, then exiting
the TUI will cause a crash.
This happens because tui_setup_io stashes some readline variables --
but because this happens before readline is initialized, some of these
are NULL. Then, when exiting the TUI, the NULL values are "restored",
causing a crash in readline.
This patch fixes the problem by ensuring that readline is initialized
first. Back in commit 11061048d ("Give a name to the TUI SingleKey
keymap"), a call to rl_initialize was removed from
tui_initialize_readline; this patch resurrects the call, but moves it
to the end of the function, so as not to remove the ability to modify
the SingleKey map from .inputrc.
gdb/ChangeLog
2020-06-16 Tom Tromey <tom@tromey.com>
PR tui/25348:
* tui/tui.c (tui_ensure_readline_initialized): Rename from
tui_initialize_readline. Only run once. Call rl_initialize.
* tui/tui.h (tui_ensure_readline_initialized): Rename from
tui_initialize_readline.
* tui/tui-io.c (tui_setup_io): Call
tui_ensure_readline_initialized.
* tui/tui-interp.c (tui_interp::init): Update.
|
|
Pedro pointed out on irc that C-x 1 from the gdb prompt will cause a
crash. This happened because of a bug in remove_windows -- it would
always remove all the windows from the layout. This patch fixes this
bug, and also arranges to have C-x 1 preserve the status window.
gdb/ChangeLog
2020-06-16 Tom Tromey <tom@tromey.com>
* tui/tui-layout.c (tui_layout_split::remove_windows): Fix logic.
Also preserve the status window.
|
|
I looked at all the calls to add_prefix_cmd, and replaced them with
calls to add_basic_prefix_cmd or add_show_prefix_cmd when appropriate.
This makes gdb's command language a bit more regular. I don't think
there's a significant downside.
Note that this patch removes a couple of tests. The removed ones are
completely redundant.
gdb/ChangeLog
2020-05-03 Tom Tromey <tom@tromey.com>
* breakpoint.c (catch_command, tcatch_command): Remove.
(_initialize_breakpoint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(set_breakpoint_cmd, show_breakpoint_cmd): Remove
* utils.c (set_internal_problem_cmd, show_internal_problem_cmd):
Remove.
(add_internal_problem_command): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* mips-tdep.c (set_mipsfpu_command): Remove.
(_initialize_mips_tdep): Use add_basic_prefix_cmd.
* dwarf2/index-cache.c (set_index_cache_command): Remove.
(_initialize_index_cache): Use add_basic_prefix_cmd.
* memattr.c (dummy_cmd): Remove.
(_initialize_mem): Use add_basic_prefix_cmd, add_show_prefix_cmd.
* tui/tui-win.c (set_tui_cmd, show_tui_cmd): Remove.
(_initialize_tui_win): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-logging.c (set_logging_command): Remove.
(_initialize_cli_logging): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(show_logging_command): Remove.
* target.c (target_command): Remove.
(add_target): Use add_basic_prefix_cmd.
gdb/testsuite/ChangeLog
2020-05-03 Tom Tromey <tom@tromey.com>
* gdb.base/sepdebug.exp: Remove "catch" test.
* gdb.base/break.exp: Remove "catch" test.
* gdb.base/default.exp: Update expected output.
|
|
This changes get_objfile_arch to be a new inline method,
objfile::arch.
To my surprise, this function came up while profiling DWARF psymbol
reading. Making this change improved performance from 1.986 seconds
to 1.869 seconds. Both measurements were done by taking the mean of
10 runs on a fixed copy of the gdb executable.
gdb/ChangeLog
2020-04-18 Tom Tromey <tom@tromey.com>
* xcoffread.c (enter_line_range, scan_xcoff_symtab): Update.
* value.c (value_fn_field): Update.
* valops.c (find_function_in_inferior)
(value_allocate_space_in_inferior): Update.
* tui/tui-winsource.c (tui_update_source_windows_with_line):
Update.
* tui/tui-source.c (tui_source_window::set_contents): Update.
* symtab.c (lookup_global_or_static_symbol)
(find_function_start_sal_1, skip_prologue_sal)
(print_msymbol_info, find_gnu_ifunc, symbol_arch): Update.
* symmisc.c (dump_msymbols, dump_symtab_1)
(maintenance_print_one_line_table): Update.
* symfile.c (init_entry_point_info, section_is_mapped)
(list_overlays_command, simple_read_overlay_table)
(simple_overlay_update_1): Update.
* stap-probe.c (handle_stap_probe): Update.
* stabsread.c (dbx_init_float_type, define_symbol)
(read_one_struct_field, read_enum_type, read_range_type): Update.
* source.c (info_line_command): Update.
* python/python.c (gdbpy_source_objfile_script)
(gdbpy_execute_objfile_script): Update.
* python/py-type.c (save_objfile_types): Update.
* python/py-objfile.c (py_free_objfile): Update.
* python/py-inferior.c (python_new_objfile): Update.
* psymtab.c (psym_find_pc_sect_compunit_symtab, dump_psymtab)
(dump_psymtab_addrmap_1, maintenance_info_psymtabs)
(maintenance_check_psymtabs): Update.
* printcmd.c (info_address_command): Update.
* objfiles.h (struct objfile) <arch>: New method, from
get_objfile_arch.
(get_objfile_arch): Don't declare.
* objfiles.c (get_objfile_arch): Remove.
(filter_overlapping_sections): Update.
* minsyms.c (msymbol_is_function): Update.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines)
(output_nondebug_symbol): Update.
* mdebugread.c (parse_symbol, basic_type, parse_partial_symbols)
(mdebug_expand_psymtab): Update.
* machoread.c (macho_add_oso_symfile): Update.
* linux-tdep.c (linux_infcall_mmap, linux_infcall_munmap):
Update.
* linux-fork.c (checkpoint_command): Update.
* linespec.c (convert_linespec_to_sals): Update.
* jit.c (finalize_symtab): Update.
* infrun.c (insert_exception_resume_from_probe): Update.
* ia64-tdep.c (ia64_find_unwind_table): Update.
* hppa-tdep.c (internalize_unwinds): Update.
* gdbtypes.c (get_type_arch, init_float_type, objfile_type):
Update.
* gcore.c (call_target_sbrk): Update.
* elfread.c (record_minimal_symbol, elf_symtab_read)
(elf_rel_plt_read, elf_gnu_ifunc_record_cache)
(elf_gnu_ifunc_resolve_by_got): Update.
* dwarf2/read.c (create_addrmap_from_index)
(create_addrmap_from_aranges, dw2_find_pc_sect_compunit_symtab)
(read_debug_names_from_section)
(process_psymtab_comp_unit_reader, add_partial_symbol)
(add_partial_subprogram, process_full_comp_unit)
(read_file_scope, read_func_scope, read_lexical_block_scope)
(read_call_site_scope, dwarf2_ranges_read)
(dwarf2_record_block_ranges, dwarf2_add_field)
(mark_common_block_symbol_computed, read_tag_pointer_type)
(read_tag_string_type, dwarf2_init_float_type)
(dwarf2_init_complex_target_type, read_base_type)
(partial_die_info::read, partial_die_info::read)
(read_attribute_value, dwarf_decode_lines_1, new_symbol)
(dwarf2_fetch_die_loc_sect_off): Update.
* dwarf2/loc.c (dwarf2_find_location_expression)
(class dwarf_evaluate_loc_desc, rw_pieced_value)
(dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval)
(dwarf2_loc_desc_get_symbol_read_needs)
(locexpr_describe_location_piece, locexpr_describe_location_1)
(loclist_describe_location): Update.
* dwarf2/index-write.c (write_debug_names): Update.
* dwarf2/frame.c (dwarf2_build_frame_info): Update.
* dtrace-probe.c (dtrace_process_dof): Update.
* dbxread.c (read_dbx_symtab, dbx_end_psymtab)
(process_one_symbol): Update.
* ctfread.c (ctf_init_float_type, read_base_type): Update.
* coffread.c (coff_symtab_read, enter_linenos, decode_base_type)
(coff_read_enum_type): Update.
* cli/cli-cmds.c (edit_command, list_command): Update.
* buildsym.c (buildsym_compunit::finish_block_internal): Update.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, get_sal_arch): Update.
* block.c (block_gdbarch): Update.
* annotate.c (annotate_source_line): Update.
|
|
Currently there are many prefix commands that do nothing but call
either help_list or cmd_show_list. I happened to notice that one such
call, for "set print type", used the wrong command list parameter,
causing incorrect output.
Rather than fix this bug in isolation, I decided to eliminate this
possibility by adding two new ways to add prefix commands, which
simply route the call to help_list or cmd_show_list, as appropriate.
This makes it impossible for a mismatch to occur.
In some cases, a bit of output was removed; however, I don't think
this output in general was very useful. It seemed redundant with
what's already printed by help_list. A representative example is this
hunk, removed from ada-lang.c:
- printf_unfiltered (_(\
-"\"set ada\" must be followed by the name of a setting.\n"));
This simplified the CLI style set/show commands quite a bit, and
allowed the deletion of a macro.
This also cleans up some unusual code in windows-tdep.c.
Tested on x86-64 Fedora 30. Note that I have no way to build the
go32-nat.c change.
gdb/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* auto-load.c (show_auto_load_cmd): Remove.
(auto_load_show_cmdlist_get): Use add_show_prefix_cmd.
* arc-tdep.c (_initialize_arc_tdep): Use add_show_prefix_cmd.
(maintenance_print_arc_command): Remove.
* tui/tui-win.c (tui_command): Remove.
(tui_get_cmd_list): Use add_basic_prefix_cmd.
* tui/tui-layout.c (tui_layout_command): Remove.
(_initialize_tui_layout): Use add_basic_prefix_cmd.
* python/python.c (user_set_python, user_show_python): Remove.
(_initialize_python): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* guile/guile.c (set_guile_command, show_guile_command): Remove.
(install_gdb_commands): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_guile_command): Remove.
* dwarf2/read.c (set_dwarf_cmd, show_dwarf_cmd): Remove.
(_initialize_dwarf2_read): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-style.h (class cli_style_option) <add_setshow_commands>:
Remove do_set and do_show parameters.
* cli/cli-style.c (set_style, show_style): Remove.
(_initialize_cli_style): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(cli_style_option::add_setshow_commands): Remove do_set and
do_show parameters.
(cli_style_option::add_setshow_commands): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
(STYLE_ADD_SETSHOW_COMMANDS): Remove macro.
(set_style_name): Remove.
* cli/cli-dump.c (dump_command, append_command): Remove.
(srec_dump_command, ihex_dump_command, verilog_dump_command)
(tekhex_dump_command, binary_dump_command)
(binary_append_command): Remove.
(_initialize_cli_dump): Use add_basic_prefix_cmd.
* windows-tdep.c (w32_prefix_command_valid): Remove global.
(init_w32_command_list): Remove; move into ...
(_initialize_windows_tdep): ... here. Use add_basic_prefix_cmd.
* valprint.c (set_print, show_print, set_print_raw)
(show_print_raw): Remove.
(_initialize_valprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* typeprint.c (set_print_type, show_print_type): Remove.
(_initialize_typeprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record.c (set_record_command, show_record_command): Remove.
(_initialize_record): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-cmds.c (_initialize_cli_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_command, show_command, set_debug, show_debug): Remove.
* top.h (set_history, show_history): Don't declare.
* top.c (set_history, show_history): Remove.
* target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd)
(unset_tdesc_cmd): Remove.
(_initialize_target_descriptions): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* symtab.c (info_module_command): Remove.
(_initialize_symtab): Use add_basic_prefix_cmd.
* symfile.c (overlay_command): Remove.
(_initialize_symfile): Use add_basic_prefix_cmd.
* sparc64-tdep.c (info_adi_command): Remove.
(_initialize_sparc64_adi_tdep): Use add_basic_prefix_cmd.
* sh-tdep.c (show_sh_command, set_sh_command): Remove.
(_initialize_sh_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* serial.c (serial_set_cmd, serial_show_cmd): Remove.
(_initialize_serial): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Remove.
(_initialize_ser_tcp): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* rs6000-tdep.c (set_powerpc_command, show_powerpc_command)
(_initialize_rs6000_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* riscv-tdep.c (show_riscv_command, set_riscv_command)
(show_debug_riscv_command, set_debug_riscv_command): Remove.
(_initialize_riscv_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* remote.c (remote_command, set_remote_cmd): Remove.
(_initialize_remote): Use add_basic_prefix_cmd.
* record-full.c (set_record_full_command)
(show_record_full_command): Remove.
(_initialize_record_full): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record-btrace.c (cmd_set_record_btrace)
(cmd_show_record_btrace, cmd_set_record_btrace_bts)
(cmd_show_record_btrace_bts, cmd_set_record_btrace_pt)
(cmd_show_record_btrace_pt): Remove.
(_initialize_record_btrace): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ravenscar-thread.c (set_ravenscar_command)
(show_ravenscar_command): Remove.
(_initialize_ravenscar): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* mips-tdep.c (show_mips_command, set_mips_command)
(_initialize_mips_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_check_command, maintenance_print_command)
(maintenance_set_cmd, maintenance_show_cmd): Remove.
(_initialize_maint_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(show_per_command_cmd): Remove.
* maint-test-settings.c (maintenance_set_test_settings_cmd):
Remove.
(maintenance_show_test_settings_cmd): Remove.
(_initialize_maint_test_settings): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint-test-options.c (maintenance_test_options_command):
Remove.
(_initialize_maint_test_options): Use add_basic_prefix_cmd.
* macrocmd.c (macro_command): Remove
(_initialize_macrocmd): Use add_basic_prefix_cmd.
* language.c (set_check, show_check): Remove.
(_initialize_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* infcmd.c (unset_command): Remove.
(_initialize_infcmd): Use add_basic_prefix_cmd.
* i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Remove.
(_initialize_i386_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* go32-nat.c (go32_info_dos_command): Remove.
(_initialize_go32_nat): Use add_basic_prefix_cmd.
* cli/cli-decode.c (do_prefix_cmd, add_basic_prefix_cmd)
(do_show_prefix_cmd, add_show_prefix_cmd): New functions.
* frame.c (set_backtrace_cmd, show_backtrace_cmd): Remove.
(_initialize_frame): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* dcache.c (set_dcache_command, show_dcache_command): Remove.
(_initialize_dcache): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cp-support.c (maint_cplus_command): Remove.
(_initialize_cp_support): Use add_basic_prefix_cmd.
* btrace.c (maint_btrace_cmd, maint_btrace_set_cmd)
(maint_btrace_show_cmd, maint_btrace_pt_set_cmd)
(maint_btrace_pt_show_cmd, _initialize_btrace): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
* breakpoint.c (save_command): Remove.
(_initialize_breakpoint): Use add_basic_prefix_cmd.
* arm-tdep.c (set_arm_command, show_arm_command): Remove.
(_initialize_arm_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ada-lang.c (maint_set_ada_cmd, maint_show_ada_cmd)
(set_ada_command, show_ada_command): Remove.
(_initialize_ada_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* command.h (add_basic_prefix_cmd, add_show_prefix_cmd): Declare.
gdb/testsuite/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* gdb.cp/maint.exp (test_help): Simplify multiple_help_body.
Update tests.
* gdb.btrace/cpu.exp: Update tests.
* gdb.base/maint.exp: Update tests.
* gdb.base/default.exp: Update tests.
* gdb.base/completion.exp: Update tests.
|
|
This moves event-loop.[ch] to gdbsupport/ and updates the uses in gdb.
gdb/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* run-on-main-thread.c: Update include.
* unittests/main-thread-selftests.c: Update include.
* tui/tui-win.c: Update include.
* tui/tui-io.c: Update include.
* tui/tui-interp.c: Update include.
* tui/tui-hooks.c: Update include.
* top.h: Update include.
* top.c: Update include.
* ser-base.c: Update include.
* remote.c: Update include.
* remote-notif.c: Update include.
* remote-fileio.c: Update include.
* record-full.c: Update include.
* record-btrace.c: Update include.
* python/python.c: Update include.
* posix-hdep.c: Update include.
* mingw-hdep.c: Update include.
* mi/mi-main.c: Update include.
* mi/mi-interp.c: Update include.
* main.c: Update include.
* linux-nat.c: Update include.
* interps.c: Update include.
* infrun.c: Update include.
* inf-loop.c: Update include.
* event-top.c: Update include.
* event-loop.c: Move to ../gdbsupport/.
* event-loop.h: Move to ../gdbsupport/.
* async-event.h: Update include.
* Makefile.in (COMMON_SFILES, HFILES_NO_SRCDIR): Update.
gdbsupport/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* event-loop.h: Move from ../gdb/.
* event-loop.cc: Move from ../gdb/.
|
|
This patch splits out some gdb-specific code from event-loop, into new
files async-event.[ch]. Strictly speaking this code could perhaps be
put into gdbsupport/, but because gdbserver does not currently use it,
it seemed better, for size reasons, to split it out.
gdb/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* tui/tui-win.c: Include async-event.h.
* remote.c: Include async-event.h.
* remote-notif.c: Include async-event.h.
* record-full.c: Include async-event.h.
* record-btrace.c: Include async-event.h.
* infrun.c: Include async-event.h.
* event-top.c: Include async-event.h.
* event-loop.h: Move some declarations to async-event.h.
* event-loop.c: Don't include ser-event.h or top.h. Move some
code to async-event.c.
* async-event.h: New file.
* async-event.c: New file.
* Makefile.in (COMMON_SFILES): Add async-event.c.
(HFILES_NO_SRCDIR): Add async-event.h.
|
|
With test-case gdb.gdb/unittest.exp, I run into:
...
(gdb) maintenance selftest^M
...
Running selftest help_doc_invariants.^M
help doc broken invariant: command 'layout next' help doc first line is \
not terminated with a '.' character^M
help doc broken invariant: command 'layout prev' help doc first line is \
not terminated with a '.' character^M
help doc broken invariant: command 'layout regs' help doc first line is \
not terminated with a '.' character^M
Self test failed: self-test failed at help-doc-selftests.c:95^M
...
Fix this by adding the missing '.' character.
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-02-24 Tom de Vries <tdevries@suse.de>
* tui/tui-layout.c (_initialize_tui_layout): Fix help messages for
commands layout next/prev/regs.
|
