aboutsummaryrefslogtreecommitdiff
path: root/gdb/tui
AgeCommit message (Collapse)AuthorFilesLines
2014-11-23Specify SA_RESTART when registering the SIGWINCH signal handlerPatrick Palka1-0/+3
SA_RESTART allows system calls to be restarted across a signal handler. By specifying this flag we fix the issue where if the user is being prompted to answer yes or no, and the terminal gets resized in the meantime, the prompt will think that the user sent an EOF and so it will take the default action for that prompt (in the case of the quit prompt, it will quit GDB). gdb/ChangeLog: * tui/tui-win.c (tui_initialize_win): Specify SA_RESTART when registering the signal handler.
2014-11-23Fix the processing of Meta-key commands in TUIPatrick Palka1-1/+27
This patch fixes the annoying bug where key sequences such as Alt_F or Alt_B (go forward or backwards by a word) do not behave promptly in TUI. You have to press a third key in order for the key sequence to register. This is mostly ncurses' fault. Calling wgetch() normally causes ncurses to read only a single key from stdin. However if the key read is the start-sequence key (^[ a.k.a. ESC) then wgetch() reads TWO keys from stdin, storing the 2nd key into an internal FIFO buffer and returning the start-sequence key. The extraneous read of the 2nd key makes us miss its corresponding stdin event, so the event loop blocks until a third key is pressed. This explains why such key sequences do not behave promptly in TUI. To fix this issue, we must somehow compensate for the missed stdin event corresponding to the 2nd byte of a key sequence. This patch achieves this by hacking up the stdin event handler to conditionally execute the readline callback multiple times in a row. This is done via a new global variable, call_stdin_event_handler_again_p, which is set from tui_getc() when we receive a start-sequence key and notice extra pending input in the ncurses buffer. Tested on x86_64-unknown-linux-gnu. gdb/ChangeLog: * event-top.h (call_stdin_event_handler_again_p): Declare. * event-top.c (call_stdin_event_handler_again_p): Define. (stdin_event_handler): Use it. * tui/tui-io.c (tui_getc): Prepare to call the stdin event handler again if there is pending input following a start sequence.
2014-11-18SYMTAB_OBJFILE: New macro.Doug Evans2-3/+3
gdb/ChangeLog: * symtab.h (SYMTAB_OBJFILE): New macro. All uses of member symtab.objfile updated to use it.
2014-11-15PR symtab/17559Doug Evans5-9/+9
Basically the problem is that "symtab" is ambiguous. Is it the primary symtab (where we canonically think of blockvectors as being stored) or is it for a specific file (where each file's line table is stored) ? gdb_disassembly wants the symtab that contains the line table but is instead getting the primary symtab. gdb/ChangeLog: PR symtab/17559 * symtab.c (find_pc_line_symtab): New function. * symtab.h (find_pc_line_symtab): Declare. * disasm.c (gdb_disassembly): Call find_pc_line_symtab instead of find_pc_symtab. * tui/tui-disasm.c (tui_set_disassem_content): Ditto. * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Ditto. * tui/tui-source.c (tui_vertical_source_scroll): Ditto. * tui/tui-win.c (make_visible_with_new_height): Ditto. * tui/tui-winsource.c (tui_horizontal_source_scroll): Ditto. (tui_display_main): Call find_pc_line_symtab instead of find_pc_line. gdb/testsuite/ChangeLog: PR symtab/17559 * gdb.base/line-symtabs.exp: New file. * gdb.base/line-symtabs.c: New file. * gdb.base/line-symtabs.h: New file.
2014-11-04tui: Fix newterm call for older ncursesSimon Marchi1-1/+1
Older versions of ncurses' newterm can't take NULL for their ofp and ifp parameters. Newer versions can, and they fall back on stdout/stdin if that is the case. This patch explicitly passes stdout/stdin to the call to newterm to avoid segfaulting with older ncurses. gdb/Changelog: 2014-11-04 Simon Marchi <simon.marchi@ericsson.com> * tui/tui.c (tui_enable): Pass stdout and stdin to newterm.
2014-10-29TUI: don't let exceptions escape while handling readline key bindingsPedro Alves1-6/+21
I noticed that with: $ TERM=dumb ./gdb -q -nx <c-x,a> Cannot enable the TUI: terminal doesn't support cursor addressing [TERM=dumb] (gdb) The next key the user types is silently eaten. The problem is that we're throwing an exception while in a readline callback that isn't prepared for that: (top-gdb) bt #0 tui_enable () at /home/pedro/gdb/mygit/build/../src/gdb/tui/tui.c:388 #1 0x000000000051f47b in tui_rl_switch_mode (notused1=1, notused2=1) at /home/pedro/gdb/mygit/build/../src/gdb/tui/tui.c:101 #2 0x0000000000768d6f in _rl_dispatch_subseq (key=1, map=0xd069c0 <emacs_ctlx_keymap>, got_subseq=0) at /home/pedro/gdb/mygit/build/../src/readline/readline.c:774 #3 0x0000000000768acb in _rl_dispatch_callback (cxt=0x1ce6190) at /home/pedro/gdb/mygit/build/../src/readline/readline.c:686 #4 0x000000000078120b in rl_callback_read_char () at /home/pedro/gdb/mygit/build/../src/readline/callback.c:170 #5 0x0000000000619445 in rl_callback_read_char_wrapper (client_data=0x0) at /home/pedro/gdb/mygit/build/../src/gdb/event-top.c:166 #6 0x000000000061981b in stdin_event_handler (error=0, client_data=0x0) at /home/pedro/gdb/mygit/build/../src/gdb/event-top.c:372 #7 0x000000000061840e in handle_file_event (data=...) at /home/pedro/gdb/mygit/build/../src/gdb/event-loop.c:762 #8 0x00000000006178f5 in process_event () at /home/pedro/gdb/mygit/build/../src/gdb/event-loop.c:339 #9 0x00000000006179bc in gdb_do_one_event () at /home/pedro/gdb/mygit/build/../src/gdb/event-loop.c:403 #10 0x0000000000617a0c in start_event_loop () at /home/pedro/gdb/mygit/build/../src/gdb/event-loop.c:428 Here, in _rl_dispatch_subseq: 769 770 rl_executing_keymap = map; 771 772 rl_dispatching = 1; 773 RL_SETSTATE(RL_STATE_DISPATCHING); 774 (*map[key].function)(rl_numeric_arg * rl_arg_sign, key); 775 RL_UNSETSTATE(RL_STATE_DISPATCHING); 776 rl_dispatching = 0; 777 778 /* If we have input pending, then the last command was a prefix 779 command. Don't change the state of rl_last_func. Otherwise, GDB is called from line 774, but longjmp'ing at that point leaves rl_dispatching and RL_STATE_DISPATCHING set. Fix this by wrapping tui_rl_switch_mode in a TRY_CATCH. gdb/ 2014-10-29 Pedro Alves <palves@redhat.com> * tui/tui.c (tui_rl_switch_mode): Wrap tui_enable/tui_disable in TRY_CATCH.
2014-10-29PR tui/16138, PR tui/17519, and misc failures to initialize the terminalPedro Alves3-25/+49
PR tui/16138 is about failure to initialize curses resulting in GDB exiting instead of throwing an error. E.g.: $ TERM=foo gdb (gdb) layout asm Error opening terminal: foo. $ The problem is that we're calling initscr to initialize the screen. As mentioned in http://pubs.opengroup.org/onlinepubs/7908799/xcurses/initscr.html: If errors occur, initscr() writes an appropriate error message to standard error and exits. ^^^^^ Instead, we should use newterm: "A program that needs an indication of error conditions, so it can continue to run in a line-oriented mode if the terminal cannot support a screen-oriented program, would also use this function." After the patch: $ TERM=foo gdb -q -nx (gdb) layout asm Cannot enable the TUI: error opening terminal [TERM=foo] (gdb) And then PR tui/17519 is about GDB not validating whether the terminal has the necessary capabilities when enabling the TUI. If one tries to enable the TUI with TERM=dumb (and e.g., from a shell within emacs), GDB ends up with a clear screen, the cursor is placed at the bottom/right corner of the screen, there's no prompt, typing shows no echo, and there's no indication of what's going on. c-x,a gets you out of the TUI, but it's completely non-obvious. After the patch, we get: $ TERM=dumb gdb -q -nx (gdb) layout asm Cannot enable the TUI: terminal doesn't support cursor addressing [TERM=dumb] (gdb) While at it, I've moved all the tui_allowed_p validation to tui_enable, and expanded the error messages. Previously we'd get: $ gdb -q -nx -i=mi (gdb) layout asm &"layout asm\n" &"TUI mode not allowed\n" ^error,msg="TUI mode not allowed" and: $ gdb -q -nx -ex "layout asm" > foo TUI mode not allowed While now we get: $ gdb -q -nx -i=mi (gdb) layout asm &"layout asm\n" &"Cannot enable the TUI when the interpreter is 'mi'\n" ^error,msg="Cannot enable the TUI when the interpreter is 'mi'" (gdb) and: $ gdb -q -nx -ex "layout asm" > foo Cannot enable the TUI when output is not a terminal Tested on x86_64 Fedora 20. gdb/ 2014-10-29 Pedro Alves <palves@redhat.com> PR tui/16138 PR tui/17519 * tui/tui-interp.c (tui_is_toplevel): Delete global. (tui_allowed_p): Delete function. * tui/tui.c: Include "interps.h". (tui_enable): Don't use tui_allowed_p. Error out here with detailed error messages if the TUI is the top level interpreter, or if output is not a terminal. Use newterm instead of initscr, and error out if initializing the terminal fails. Also error out if the terminal doesn't support cursor addressing. * tui/tui.h (tui_allowed_p): Delete declaration.
2014-10-08Remove spurious exceptions.h inclusionsGary Benson1-1/+0
defs.h includes utils.h, and utils.h includes exceptions.h. All GDB .c files include defs.h as their first line, so no file other than utils.h needs to include exceptions.h. This commit removes all such inclusions. gdb/ChangeLog: * ada-lang.c: Do not include exceptions.h. * ada-valprint.c: Likewise. * amd64-tdep.c: Likewise. * auto-load.c: Likewise. * block.c: Likewise. * break-catch-throw.c: Likewise. * breakpoint.c: Likewise. * btrace.c: Likewise. * c-lang.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-script.c: Likewise. * completer.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * darwin-nat.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * event-top.c: Likewise. * f-valprint.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * gdbtypes.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * guile/scm-auto-load.c: Likewise. * guile/scm-breakpoint.c: Likewise. * guile/scm-cmd.c: Likewise. * guile/scm-frame.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-param.c: Likewise. * guile/scm-symbol.c: Likewise. * guile/scm-type.c: Likewise. * hppa-hpux-tdep.c: Likewise. * i386-tdep.c: Likewise. * inf-loop.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * interps.h: Likewise. * jit.c: Likewise. * linespec.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32r-rom.c: Likewise. * main.c: Likewise. * memory-map.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * monitor.c: Likewise. * nto-procfs.c: Likewise. * objc-lang.c: Likewise. * p-valprint.c: Likewise. * parse.c: Likewise. * ppc-linux-tdep.c: Likewise. * printcmd.c: Likewise. * probe.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-breakpoint.c: Likewise. * python/py-cmd.c: Likewise. * python/py-finishbreakpoint.c: Likewise. * python/py-frame.c: Likewise. * python/py-framefilter.c: Likewise. * python/py-function.c: Likewise. * python/py-gdb-readline.c: Likewise. * python/py-inferior.c: Likewise. * python/py-infthread.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-linetable.c: Likewise. * python/py-param.c: Likewise. * python/py-prettyprint.c: Likewise. * python/py-symbol.c: Likewise. * python/py-type.c: Likewise. * python/py-value.c: Likewise. * python/python-internal.h: Likewise. * python/python.c: Likewise. * record-btrace.c: Likewise. * record-full.c: Likewise. * regcache.c: Likewise. * remote-fileio.c: Likewise. * remote-mips.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-nat.c: Likewise. * skip.c: Likewise. * solib-darwin.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-ia64-hpux.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * solib.c: Likewise. * spu-tdep.c: Likewise. * stack.c: Likewise. * stap-probe.c: Likewise. * symfile-mem.c: Likewise. * symmisc.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-interp.c: Likewise. * typeprint.c: Likewise. * utils.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * windows-nat.c: Likewise. * xml-support.c: Likewise.
2014-08-29Replace hardwired error handlers in tui_initialize_ioGary Benson1-8/+4
tui_initialize_io contains a pair of hardwired fprintf/exit error handlers. I was unable to find any documentation as to why they're hardwired (the code appeared in a monolithic block back in 2001: https://sourceware.org/ml/gdb-patches/2001-07/msg00490.html) and I was also unable to come up with a situation where error would not be suitable, so I have replaced both handlers with calls to error. gdb/ChangeLog: * tui/tui-io.c (tui_initialize_io): Replace two fprintf/exit pairs with calls to error. Wrap the message with _().
2014-08-27Fix terminal state corruption when starting a program from within TUIPatrick Palka1-2/+3
The TUI terminal state becomes corrupted (e.g. key sequences such as Alt_F and Alt_B no longer work) when one attaches to an inferior process (via "run" or "attach") from within TUI. This terminal corruption remains until you switch out of TUI mode. This happens because the terminal state is not properly saved when switching to and out from TUI mode. Although the functions tui_enable() and tui_disable() both call the function target_terminal_save_ours() to save the terminal state, this function is a no-op unless GDB has already attached to an inferior process. This is because only the "native" target has a useful implementation of target_terminal_save_ours() (namely child_terminal_save_ours()) and we only have the "native" target in our target vector if GDB has already attached to an inferior process. So without an inferior process, switching to and from TUI mode does not actually save the terminal state. Therefore when you attach to an inferior process from within TUI mode, the proper terminal state is not restored (after swapping from the inferior's terminal back to the GDB terminal). To fix this we just have to ensure that the terminal state is always being properly saved when switching from and to TUI mode. To achieve this, this patch removes the polymorphic function target_terminal_save_ours() and replaces it with a regular function gdb_save_tty_state() that always saves the terminal state. Tested on x86_64-unknown-linux-gnu by running "make check", no new regressions. gdb/ChangeLog: * target.h (struct target_ops::to_terminal_save_ours): Remove declaration. (target_terminal_save_ours): Remove macro. * target-delegates.c: Regenerate. * inf-child.c (inf_child_target): Don't set the nonexistent field to_terminal_save_ours. * inferior.h (child_terminal_save_ours): Remove declaration. * terminal.h (gdb_save_tty_state): New declaration. * inflow.c (child_terminal_save_ours): Rename to ... (gdb_save_tty_state): ... this. * tui/tui.c: Include terminal.h. (tui_enable): Use gdb_save_tty_state instead of target_terminal_save_ours. (tui_disable): Likewise.
2014-08-07Include string.h in common-defs.hGary Benson12-22/+0
This commit includes string.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include string.h. * aarch64-tdep.c: Do not include string.h. * ada-exp.y: Likewise. * ada-lang.c: Likewise. * ada-lex.l: Likewise. * ada-typeprint.c: Likewise. * ada-valprint.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alpha-nat.c: Likewise. * alpha-osf1-tdep.c: Likewise. * alpha-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-dicos-tdep.c: Likewise. * amd64-linux-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-sol2-tdep.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-linux-nat.c: Likewise. * arm-linux-tdep.c: Likewise. * arm-tdep.c: Likewise. * arm-wince-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * armnbsd-nat.c: Likewise. * armnbsd-tdep.c: Likewise. * armobsd-tdep.c: Likewise. * avr-tdep.c: Likewise. * ax-gdb.c: Likewise. * ax-general.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * breakpoint.c: Likewise. * build-id.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * c-typeprint.c: Likewise. * c-valprint.c: Likewise. * charset.c: Likewise. * cli-out.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-setshow.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/agent.c: Likewise. * common/buffer.c: Likewise. * common/buffer.h: Likewise. * common/common-utils.c: Likewise. * common/filestuff.c: Likewise. * common/filestuff.c: Likewise. * common/format.c: Likewise. * common/print-utils.c: Likewise. * common/rsp-low.c: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * common/xml-utils.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * cris-tdep.c: Likewise. * d-exp.y: Likewise. * darwin-nat.c: Likewise. * dbxread.c: Likewise. * dcache.c: Likewise. * demangle.c: Likewise. * dicos-tdep.c: Likewise. * disasm.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * elfread.c: Likewise. * environ.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * exec.c: Likewise. * expprint.c: Likewise. * f-exp.y: Likewise. * f-lang.c: Likewise. * f-typeprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findcmd.c: Likewise. * findvar.c: Likewise. * fork-child.c: Likewise. * frame.c: Likewise. * frv-linux-tdep.c: Likewise. * frv-tdep.c: Likewise. * gdb.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * go-exp.y: Likewise. * go-lang.c: Likewise. * go32-nat.c: Likewise. * guile/guile.c: Likewise. * guile/scm-auto-load.c: Likewise. * hppa-hpux-tdep.c: Likewise. * hppa-linux-nat.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-cygwin-tdep.c: Likewise. * i386-dicos-tdep.c: Likewise. * i386-linux-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-sol2-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-linux-nat.c: Likewise. * inf-child.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * iq2000-tdep.c: Likewise. * irix5-nat.c: Likewise. * jv-exp.y: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * jv-valprint.c: Likewise. * language.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * lm32-tdep.c: Likewise. * m2-exp.y: Likewise. * m2-typeprint.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-linux-tdep.c: Likewise. * m32r-rom.c: Likewise. * m32r-tdep.c: Likewise. * m68hc11-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-tdep.c: Likewise. * m68klinux-nat.c: Likewise. * m68klinux-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macrocmd.c: Likewise. * main.c: Likewise. * mdebugread.c: Likewise. * mem-break.c: Likewise. * memattr.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-disas.c: Likewise. * mi/mi-cmd-env.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-cmd-var.c: Likewise. * mi/mi-cmds.c: Likewise. * mi/mi-console.c: Likewise. * mi/mi-getopt.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * mi/mi-parse.c: Likewise. * microblaze-rom.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * minidebug.c: Likewise. * minsyms.c: Likewise. * mips-irix-tdep.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mipsread.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * monitor.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-procfs.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-waitpid.c: Likewise. * nbsd-tdep.c: Likewise. * nios2-linux-tdep.c: Likewise. * nto-procfs.c: Likewise. * nto-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * osdata.c: Likewise. * p-exp.y: Likewise. * p-lang.c: Likewise. * p-typeprint.c: Likewise. * parse.c: Likewise. * posix-hdep.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-gdb-readline.c: Likewise. * ravenscar-thread.c: Likewise. * regcache.c: Likewise. * registry.c: Likewise. * remote-fileio.c: Likewise. * remote-m32r-sdi.c: Likewise. * remote-mips.c: Likewise. * remote-notif.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * reverse.c: Likewise. * rs6000-aix-tdep.c: Likewise. * ser-base.c: Likewise. * ser-go32.c: Likewise. * ser-mingw.c: Likewise. * ser-pipe.c: Likewise. * ser-tcp.c: Likewise. * ser-unix.c: Likewise. * serial.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * shnbsd-tdep.c: Likewise. * skip.c: Likewise. * sol-thread.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-osf.c: Likewise. * solib-som.c: Likewise. * solib-spu.c: Likewise. * solib-target.c: Likewise. * solib.c: Likewise. * somread.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * spu-linux-nat.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * std-regs.c: Likewise. * symfile.c: Likewise. * symmisc.c: Likewise. * symtab.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-command.c: Likewise. * tui/tui-data.c: Likewise. * tui/tui-disasm.c: Likewise. * tui/tui-file.c: Likewise. * tui/tui-layout.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-regs.c: Likewise. * tui/tui-source.c: Likewise. * tui/tui-stack.c: Likewise. * tui/tui-win.c: Likewise. * tui/tui-windata.c: Likewise. * tui/tui-winsource.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-tdep.c: Likewise. * vaxnbsd-tdep.c: Likewise. * vaxobsd-tdep.c: Likewise. * windows-nat.c: Likewise. * xcoffread.c: Likewise. * xml-support.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include string.h. * event-loop.c: Likewise. * linux-low.c: Likewise. * regcache.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise.
2014-08-07Include gdb_assert.h in common-defs.hGary Benson2-2/+0
This commit includes gdb_assert.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include gdb_assert.h. * aarch64-tdep.c: Do not include gdb_assert.h. * addrmap.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-tdep.c: Likewise. * amd64bsd-nat.c: Likewise. * amd64fbsd-nat.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64nbsd-nat.c: Likewise. * amd64nbsd-tdep.c: Likewise. * amd64obsd-nat.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * auxv.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * blockframe.c: Likewise. * breakpoint.c: Likewise. * bsd-kvm.c: Likewise. * bsd-uthread.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * charset.c: Likewise. * cleanups.c: Likewise. * cli-out.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/common-utils.c: Likewise. * common/queue.h: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * complaints.c: Likewise. * completer.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-namespace.c: Likewise. * cp-support.c: Likewise. * cris-tdep.c: Likewise. * dbxread.c: Likewise. * dictionary.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2expr.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * expprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findvar.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * frv-tdep.c: Likewise. * gcore.c: Likewise. * gdb-dlfcn.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v3-abi.c: Likewise. * go-lang.c: Likewise. * guile/scm-exception.c: Likewise. * guile/scm-gsmob.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-math.c: Likewise. * guile/scm-pretty-print.c: Likewise. * guile/scm-safe-call.c: Likewise. * guile/scm-utils.c: Likewise. * guile/scm-value.c: Likewise. * h8300-tdep.c: Likewise. * hppa-hpux-nat.c: Likewise. * hppa-tdep.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-darwin-nat.c: Likewise. * i386-darwin-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-nat.c: Likewise. * i386fbsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-tdep.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * inline-frame.c: Likewise. * interps.c: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-nat.c: Likewise. * m68kbsd-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macroexp.c: Likewise. * macrotab.c: Likewise. * maint.c: Likewise. * mdebugread.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-common.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * mips-linux-nat.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/mips-linux-watch.c: Likewise. * nios2-linux-tdep.c: Likewise. * nios2-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * obsd-nat.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * parse.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-nat.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-nat.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-nat.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * psymtab.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-value.c: Likewise. * regcache.c: Likewise. * reggroups.c: Likewise. * registry.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-tdep.c: Likewise. * s390-linux-tdep.c: Likewise. * score-tdep.c: Likewise. * ser-base.c: Likewise. * ser-mingw.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * solib-darwin.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-sol2-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparc64obsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * sparcobsd-tdep.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * symfile.c: Likewise. * symtab.c: Likewise. * target-descriptions.c: Likewise. * target-memory.c: Likewise. * target.c: Likewise. * tic6x-linux-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tramp-frame.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-winsource.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valops.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-nat.c: Likewise. * xml-syscall.c: Likewise. * xml-tdesc.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. * xtensa-tdep.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include gdb_assert.h.
2014-08-07Move stdlib.h to common-defs.hGary Benson1-1/+0
This commit moves the inclusion of stdlib.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include stdlib.h. * defs.h: Do not include stdlib.h. * addrmap.c: Likewise. * bcache.c: Likewise. * common/buffer.c: Likewise. * common/common-utils.c: Likewise. * cp-name-parser.y: Likewise. * go32-nat.c: Likewise. * mn10300-linux-tdep.c: Likewise. * nat/linux-osdata.c: Likewise. * tui/tui.c: Likewise. * windows-nat.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include stdlib.h. * inferiors.c: Likewise. * linux-low.c: Likewise. * regcache.c: Likewise. * spu-low.c: Likewise. * tracepoint.c: Likewise. * utils.c: Likewise.
2014-08-07Move stdio.h to common-defs.hGary Benson2-2/+0
This commit moves the inclusion of stdio.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include stdio.h. * defs.h: Do not include stdio.h. * ada-lang.c: Likewise. * common/buffer.c: Likewise. * common/common-utils.c: Likewise. * cp-name-parser.y: Likewise. * gnu-nat.c: Likewise. * go32-nat.c: Likewise. * i386gnu-nat.c: Likewise. * proc-api.c: Likewise. * proc-events.c: Likewise. * proc-flags.c: Likewise. * proc-why.c: Likewise. * python/python-internal.h: Likewise. * target-memory.c: Likewise. * tui/tui-io.c: Likewise. * tui/tui.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include stdio.h. * linux-low.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise. * wincecompat.c: Likewise.
2014-07-24Fix pagination crash when the TUI is activePedro Alves1-1/+1
The TUI currently crashes when the user types <return> in response to a pagination prompt: $ gdb --tui ... *the TUI is now active* (gdb) set height 2 (gdb) help List of classes of commands: Program received signal SIGSEGV, Segmentation fault. strlen () at ../sysdeps/x86_64/strlen.S:106 106 movdqu (%rax), %xmm12 (top-gdb) bt #0 strlen () at ../sysdeps/x86_64/strlen.S:106 #1 0x000000000086be5f in xstrdup (s=0x0) at ../src/libiberty/xstrdup.c:33 #2 0x00000000005163f9 in tui_prep_terminal (notused1=1) at ../src/gdb/tui/tui-io.c:296 #3 0x000000000077a7ee in _rl_callback_newline () at ../src/readline/callback.c:82 #4 0x000000000077a853 in rl_callback_handler_install (prompt=0x0, linefunc=0x618b60 <command_line_handler>) at ../src/readline/callback.c:102 #5 0x0000000000718a5c in gdb_readline_wrapper_cleanup (arg=0xfd14d0) at ../src/gdb/top.c:788 #6 0x0000000000596d08 in do_my_cleanups (pmy_chain=0xcf0b38 <cleanup_chain>, old_chain=0x1043d10) at ../src/gdb/cleanups.c:155 #7 0x0000000000596d75 in do_cleanups (old_chain=0x1043d10) at ../src/gdb/cleanups.c:177 #8 0x0000000000718bd9 in gdb_readline_wrapper (prompt=0x7fffffffcfa0 "---Type <return> to continue, or q <return> to quit---") at ../src/gdb/top.c:835 #9 0x000000000071cf74 in prompt_for_continue () at ../src/gdb/utils.c:1894 #10 0x000000000071d434 in fputs_maybe_filtered (linebuffer=0x1043db0 "List of classes of commands:\n\n", stream=0xf72e20, filter=1) at ../src/gdb/utils.c:2111 #11 0x000000000071da0f in vfprintf_maybe_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n", args=0x7fffffffd118, filter=1) at ../src/gdb/utils.c:2339 #12 0x000000000071da4a in vfprintf_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n", args=0x7fffffffd118) at ../src/gdb/utils.c:2347 #13 0x000000000071dc72 in fprintf_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n") at ../src/gdb/utils.c:2399 #14 0x00000000004f90ab in help_list (list=0xe6d100, cmdtype=0x89ad8c "", class=all_classes, stream=0xf72e20) at ../src/gdb/cli/cli-decode.c:1038 #15 0x00000000004f8dba in help_cmd (arg=0x0, stream=0xf72e20) at ../src/gdb/cli/cli-decode.c:946 Git 0017922 added: @@ -776,6 +777,12 @@ gdb_readline_wrapper_cleanup (void *arg) gdb_assert (input_handler == gdb_readline_wrapper_line); input_handler = cleanup->handler_orig; + + /* Reinstall INPUT_HANDLER in readline, without displaying a + prompt. */ + if (async_command_editing_p) + rl_callback_handler_install (NULL, input_handler); and tui_prep_terminal simply misses handling the case of a NULL rl_prompt. I also checked that readline's sources do similar checks. gdb/ 2014-07-24 Pedro Alves <palves@redhat.com> * tui/tui-io.c (tui_prep_terminal): Handle NULL rl_prompt.
2014-06-20Fix --with-system-readline with readline-6.3 patch 5Jan Kratochvil1-4/+4
I have filed now: --with-system-readline uses bundled readline include files https://sourceware.org/bugzilla/show_bug.cgi?id=17077 To see any effect of the patch below you have to do: rm -rf readline Otherwise readline include files get used the bundled ones from GDB which are currently 6.2 while system readline may be 6.3 already. You also have to use system readline-6.3 including its upstream patch: [Bug-readline] Readline-6.3 Official Patch 5 http://lists.gnu.org/archive/html/bug-readline/2014-04/msg00018.html Message-ID: <140415125618.AA57598.SM@caleb.ins.cwru.edu> In short it happens on Fedora Rawhide since: readline-6.3-1.fc21 https://koji.fedoraproject.org/koji/buildinfo?buildID=538941 The error is: ../../gdb/tui/tui-io.c:132:1: error: 'Function' is deprecated [-Werror=deprecated-declarations] static Function *tui_old_rl_getc_function; ^ ../../gdb/tui/tui-io.c:133:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations] static VFunction *tui_old_rl_redisplay_function; ^ ../../gdb/tui/tui-io.c:134:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations] static VFunction *tui_old_rl_prep_terminal; ^ ../../gdb/tui/tui-io.c:135:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations] static VFunction *tui_old_rl_deprep_terminal; ^ It is since bash change: lib/readline/rltypedefs.h - remove old Function/VFunction/CPFunction/CPPFunction typedefs as suggested by Tom Tromey <tromey@redhat.com> The new typedefs used below are present in readline/rltypedefs.h since: git://git.savannah.gnu.org/bash.git commit 28ef6c316f1aff914bb95ac09787a3c83c1815fd Date: Fri Apr 6 19:14:31 2001 +0000 gdb/ 2014-06-20 Jan Kratochvil <jan.kratochvil@redhat.com> Fix --with-system-readline with readline-6.3 patch 5. * tui/tui-io.c (tui_old_rl_getc_function, tui_old_rl_redisplay_function) (tui_old_rl_prep_terminal, tui_old_rl_deprep_terminal): Use rl_*_t types. Message-ID: <20140620105004.GA22236@host2.jankratochvil.net>
2014-06-13make calls to help_list use enumeratorTom Tromey2-2/+2
Currently there are many calls to help_list that pass the constant -1 as the "class" value. However, the parameter is declared as being of type enum command_class, and uses of the constant violate this abstraction. This patch fixes the error everywhere it occurs in the gdb sources. Tested by rebuilding. 2014-06-13 Tom Tromey <tromey@redhat.com> * cp-support.c (maint_cplus_command): Pass all_commands, not -1, to help_list. * guile/guile.c (info_guile_command): Pass all_commands, not -1, to help_list. * tui/tui-win.c (tui_command): Pass all_commands, not -1, to help_list. * tui/tui-regs.c (tui_reg_command): Pass all_commands, not -1, to help_list.Pass all_commands, not -1, to help_list. * cli/cli-dump.c (dump_command, append_command) (srec_dump_command, ihex_dump_command, tekhex_dump_command) (binary_dump_command, binary_append_command): Pass all_commands, not -1, to help_list. * cli/cli-cmds.c (info_command, set_debug): Pass all_commands, not -1, to help_list. * valprint.c (set_print, set_print_raw): Pass all_commands, not -1, to help_list. * typeprint.c (set_print_type): Pass all_commands, not -1, to help_list. * top.c (set_history): Pass all_commands, not -1, to help_list. * target-descriptions.c (set_tdesc_cmd, unset_tdesc_cmd): Pass all_commands, not -1, to help_list. * symfile.c (overlay_command): Pass all_commands, not -1, to help_list. * spu-tdep.c (info_spu_command): Pass all_commands, not -1, to help_list. * serial.c (serial_set_cmd): Pass all_commands, not -1, to help_list. * ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Pass all_commands, not -1, to help_list. * remote.c (remote_command, set_remote_cmd): Pass all_commands, not -1, to help_list. * ravenscar-thread.c (set_ravenscar_command): Pass all_commands, not -1, to help_list. * maint.c (maintenance_command, maintenance_info_command) (maintenance_print_command, maintenance_set_cmd): Pass all_commands, not -1, to help_list. * macrocmd.c (macro_command): Pass all_commands, not -1, to help_list. * language.c (set_check): Pass all_commands, not -1, to help_list. * infcmd.c (unset_command): Pass all_commands, not -1, to help_list. * frame.c (set_backtrace_cmd): Pass all_commands, not -1, to help_list. * dwarf2read.c (set_dwarf2_cmd): Pass all_commands, not -1, to help_list. * dcache.c (set_dcache_command): Pass all_commands, not -1, to help_list. * breakpoint.c (save_command): Pass all_commands, not -1, to help_list. * ada-lang.c (maint_set_ada_cmd, set_ada_command): Pass all_commands, not -1, to help_list.
2014-05-29Make display_gdb_prompt CLI-only.Pedro Alves1-12/+20
Enabling target-async by default will require implementing sync execution on top of an async target, much like foreground command are implemented on the CLI in async mode. In order to do that, we will need better control of when to print the MI prompt. Currently the interp->display_prompt_p hook is all we have, and MI just always returns false, meaning, make display_gdb_prompt a no-op. We'll need to be able to know to print the MI prompt in some of the conditions that display_gdb_prompt is called from the core, but not all. This is all a litte twisted currently. As we can see, display_gdb_prompt is really CLI specific, so make the console interpreters (console/tui) themselves call it. To be able to do that, and add a few different observers that the interpreters can use to distinguish when or why the the prompt is being printed: #1 - one called whenever a command is cancelled due to an error. #2 - another for when a foreground command just finished. In both cases, CLI wants to print the prompt, while MI doesn't. MI will want to print the prompt in the second case when in a special MI mode. The display_gdb_prompt call in interp_set made me pause. The comment there reads: /* Finally, put up the new prompt to show that we are indeed here. Also, display_gdb_prompt for the console does some readline magic which is needed for the console interpreter, at least... */ But, that looks very much like a no-op to me currently: - the MI interpreter always return false in the prompt hook, meaning actually display no prompt. - the interpreter used at that point is still quiet. And the console/tui interpreters return false in the prompt hook if they're quiet, meaning actually display no prompt. The only remaining possible use would then be the readline magic. But whatever that might have been, it's not reacheable today either, because display_gdb_prompt returns early, before touching readline if the interpreter returns false in the display_prompt_p hook. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interpreter_display_prompt_p): Delete. (_initialize_cli_interp): Adjust. * event-loop.c: Include "observer.h". (start_event_loop): Notify 'command_error' observers instead of calling display_gdb_prompt. Remove FIXME comment. * event-top.c (display_gdb_prompt): Remove call into the interpreters. * inf-loop.c: Include "observer.h". (inferior_event_handler): Notify 'command_error' observers instead of calling display_gdb_prompt. * infrun.c (fetch_inferior_event): Notify 'sync_execution_done' observers instead of calling display_gdb_prompt. * interps.c (interp_set): Don't call display_gdb_prompt. (current_interp_display_prompt_p): Delete. * interps.h (interp_prompt_p): Delete declaration. (interp_prompt_p_ftype): Delete. (struct interp_procs) <prompt_proc_p>: Delete field. (current_interp_display_prompt_p): Delete declaration. * mi-interp.c (mi_interpreter_prompt_p): Delete. (_initialize_mi_interp): Adjust. * tui-interp.c (tui_init): Install 'sync_execution_done' and 'command_error' observers. (tui_on_sync_execution_done, tui_on_command_error): New functions. (tui_display_prompt_p): Delete. (_initialize_tui_interp): Adjust. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> * observer.texi (sync_execution_done, command_error): New subjects.
2014-05-29PR gdb/13860 - Make MI sync vs async output (closer to) the same.Pedro Alves1-1/+63
Ignoring expected and desired differences like whether the prompt is output after *stoppped records, GDB MI output is still different in sync and async modes. In sync mode, when a CLI execution command is entered, the "reason" field is missing in the *stopped async record. And in async mode, for some events, like program exits, the corresponding CLI output is missing in the CLI channel. Vis, diff between sync vs async modes: run ^running *running,thread-id="1" (gdb) ... - ~"[Inferior 1 (process 15882) exited normally]\n" =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" si ... (gdb) ~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n" - *stopped,frame=...,thread-id="1",stopped-threads="all",core="0" + *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0" (gdb) In addition, in both cases, when a MI execution command is entered, and a breakpoint triggers, the event is sent to the console too. But some events like program exits have the CLI output missing in the CLI channel: -exec-run ^running *running,thread-id="1" (gdb) ... =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" We'll want to make background commands always possible by default. IOW, make target-async be the default. But, in order to do that, we'll need to emulate MI sync on top of an async target. That means we'll have yet another combination to care for in the testsuite. Rather than making the testsuite cope with all these differences, I thought it better to just fix GDB to always have the complete output, no matter whether it's in sync or async mode. This is all related to interpreter-exec, and the corresponding uiout switching. (Typing a CLI command directly in MI is shorthand for running it through -interpreter-exec console.) In sync mode, when a CLI command is active, normal_stop is called when the current interpreter and uiout are CLI's. So print_XXX_reason prints the stop reason to CLI uiout (only), and we don't show it in MI. In async mode the stop event is processed when we're back in the MI interpreter, so the stop reason is printed directly to the MI uiout. Fix this by making run control event printing roughly independent of whatever is the current interpreter or uiout. That is, move these prints to interpreter observers, that know whether to print or be quiet, and if printing, which uiout to print to. In the case of the console/tui interpreters, only print if the top interpreter. For MI, always print. Breakpoint hits / normal stops are already handled similarly -- MI has a normal_stop observer that prints the event to both MI and the CLI, though that could be cleaned up further in the direction of this patch. This also makes all of: (gdb) foo and (gdb) interpreter-exec MI "-exec-foo" and (gdb) -exec-foo and (gdb) -interpreter-exec console "foo" print as expected. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * cli/cli-interp.c: Include infrun.h and observer.h. (cli_uiout, cli_interp): New globals. (cli_on_signal_received, cli_on_end_stepping_range) (cli_on_signal_exited, cli_on_exited, cli_on_no_history): New functions. (cli_interpreter_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_cli_interp): Remove cli_interp local. * infrun.c (handle_inferior_event): Call the several stop reason observers instead of printing the stop reason directly. (end_stepping_range): New function. (print_end_stepping_range_reason, print_signal_exited_reason) (print_exited_reason, print_signal_received_reason) (print_no_history_reason): Make static, and add an uiout parameter. Print to that instead of to CURRENT_UIOUT. * infrun.h (print_end_stepping_range_reason) (print_signal_exited_reason, print_exited_reason) (print_signal_received_reason print_no_history_reason): New declarations. * mi/mi-common.h (struct mi_interp): Rename 'uiout' field to 'mi_uiout'. <cli_uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new uiout for CLI output. Install 'signal_received', 'end_stepping_range', 'signal_exited', 'exited' and 'no_history' observers. (find_mi_interpreter, mi_interp_data, mi_on_signal_received) (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited) (mi_on_no_history): New functions. (ui_out_free_cleanup): Delete function. (mi_on_normal_stop): Don't allocate a new uiout for CLI output, instead use the one already stored in the MI interpreter data. (mi_ui_out): Adjust. * tui/tui-interp.c: Include infrun.h and observer.h. (tui_interp): New global. (tui_on_signal_received, tui_on_end_stepping_range) (tui_on_signal_exited, tui_on_exited) (tui_on_no_history): New functions. (tui_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_tui_interp): Delete tui_interp local. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * observer.texi (signal_received, end_stepping_range) (signal_exited, exited, no_history): New observer subjects. gdb/testsuite/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop reason, even in sync mode.
2014-02-26start change to progspace independenceTom Tromey1-6/+7
This patch starts changing minimal symbols to be independent of the program space. Specifically, it adds a new objfile parameter to MSYMBOL_VALUE_ADDRESS and changes all the code to use it. This is needed so we can change gdb to apply the section offset when a minsym's address is computed, as opposed to baking the offsets into the symbol itself. A few spots still need the unrelocated address. For these, we introduce MSYMBOL_VALUE_RAW_ADDRESS. As a convenience, we also add the new macro BMSYMBOL_VALUE_ADDRESS, which computes the address of a bound minimal symbol. This just does the obvious thing with the fields. Note that this change does not actually enable program space independence. That requires more changes to gdb. However, to ensure that these changes compile properly, this patch does add the needed section lookup code to MSYMBOL_VALUE_ADDRESS -- it just ensures it has no effect at runtime by multiplying the offset by 0. 2014-02-26 Tom Tromey <tromey@redhat.com> * ada-lang.c (ada_main_name): Update. (ada_add_standard_exceptions): Update. * ada-tasks.c (ada_tasks_inferior_data_sniffer): Update. * aix-thread.c (pdc_symbol_addrs, pd_enable): Update. * arm-tdep.c (skip_prologue_function, arm_skip_stub): Update. * auxv.c (ld_so_xfer_auxv): Update. * avr-tdep.c (avr_scan_prologue): Update. * ax-gdb.c (gen_var_ref): Update. * blockframe.c (get_pc_function_start) (find_pc_partial_function_gnu_ifunc): Update. * breakpoint.c (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint): Update. * bsd-uthread.c (bsd_uthread_lookup_address): Update. * c-valprint.c (c_val_print): Update. * coff-pe-read.c (add_pe_forwarded_sym): Update. * common/agent.c (agent_look_up_symbols): Update. * dbxread.c (find_stab_function_addr, end_psymtab): Update. * dwarf2loc.c (call_site_to_target_addr): Update. * dwarf2read.c (dw2_find_pc_sect_symtab): Update. * elfread.c (elf_gnu_ifunc_record_cache) (elf_gnu_ifunc_resolve_by_got): Update. * findvar.c (default_read_var_value): Update. * frame.c (inside_main_func): Update. * frv-tdep.c (frv_frame_this_id): Update. * glibc-tdep.c (glibc_skip_solib_resolver): Update. * gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline): Update. * hppa-hpux-tdep.c (hppa64_hpux_search_dummy_call_sequence) (hppa_hpux_find_dummy_bpaddr): Update. * hppa-tdep.c (hppa_symbol_address): Update. * infcmd.c (until_next_command): Update. * jit.c (jit_read_descriptor, jit_breakpoint_re_set_internal): Update. * linespec.c (minsym_found, add_minsym): Update. * linux-nat.c (get_signo): Update. * linux-thread-db.c (inferior_has_bug): Update. * m32c-tdep.c (m32c_return_value) (m32c_m16c_address_to_pointer): Update. * m32r-tdep.c (m32r_frame_this_id): Update. * m68hc11-tdep.c (m68hc11_get_register_info): Update. * machoread.c (macho_resolve_oso_sym_with_minsym): Update. * maint.c (maintenance_translate_address): Update. * minsyms.c (lookup_minimal_symbol_by_pc_name): Update. (frob_address): New function. (lookup_minimal_symbol_by_pc_section_1): Use raw addresses, frob_address. Rename parameter to "pc_in". (compare_minimal_symbols, compact_minimal_symbols): Use raw addresses. (find_solib_trampoline_target, minimal_symbol_upper_bound): Update. * mips-linux-tdep.c (mips_linux_skip_resolver): Update. * mips-tdep.c (mips_skip_pic_trampoline_code): Update. * objc-lang.c (find_objc_msgsend): Update. * objfiles.c (objfile_relocate1): Update. * obsd-tdep.c (obsd_skip_solib_resolver): Update. * p-valprint.c (pascal_val_print): Update. * parse.c (write_exp_msymbol): Update. * ppc-linux-tdep.c (ppc_linux_spe_context_lookup) (ppc_elfv2_skip_entrypoint): Update. * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update. * printcmd.c (build_address_symbolic, msym_info) (address_info): Update. * proc-service.c (ps_pglobal_lookup): Update. * psymtab.c (find_pc_sect_psymtab_closer) (find_pc_sect_psymtab, find_pc_sect_symtab_from_partial): Change msymbol parameter to bound_minimal_symbol. * ravenscar-thread.c (get_running_thread_id): Update. * remote.c (remote_check_symbols): Update. * sh64-tdep.c (sh64_elf_make_msymbol_special): Use raw address. * sol2-tdep.c (sol2_skip_solib_resolver): Update. * solib-dsbt.c (lm_base): Update. * solib-frv.c (lm_base, main_got): Update. * solib-irix.c (locate_base): Update. * solib-som.c (som_solib_create_inferior_hook) (link_map_start): Update. * solib-spu.c (spu_enable_break, ocl_enable_break): Update. * solib-svr4.c (elf_locate_base, enable_break): Update. * spu-tdep.c (spu_get_overlay_table, spu_catch_start) (flush_ea_cache): Update. * stabsread.c (define_symbol, scan_file_globals): Update. * stack.c (find_frame_funname): Update. * symfile-debug.c (debug_qf_expand_symtabs_matching) (debug_qf_find_pc_sect_symtab): Update. * symfile.c (simple_read_overlay_table) (simple_overlay_update): Update. * symfile.h (struct quick_symbol_functions) <find_pc_sect_symtab>: Change type of msymbol to bound_minimal_symbol. * symmisc.c (dump_msymbols): Update. * symtab.c (find_pc_sect_symtab_via_partial) (find_pc_sect_psymtab, find_pc_sect_line, skip_prologue_sal) (search_symbols, print_msymbol_info): Update. * symtab.h (MSYMBOL_VALUE_RAW_ADDRESS): New macro. (MSYMBOL_VALUE_ADDRESS): Redefine. (BMSYMBOL_VALUE_ADDRESS): New macro. * tracepoint.c (scope_info): Update. * tui/tui-disasm.c (tui_find_disassembly_address) (tui_get_begin_asm_address): Update. * valops.c (find_function_in_inferior): Update. * value.c (value_static_field, value_fn_field): Update.
2014-02-26use bound_minsym as result for lookup_minimal_symbol et alTom Tromey1-5/+5
This patch changes a few minimal symbol lookup functions to return a bound_minimal_symbol rather than a pointer to the minsym. This change helps prepare gdb for computing a minimal symbol's address at the point of use. Note that this changes even those functions that ostensibly search a single objfile. That was necessary because, in fact, those functions can search an objfile and its separate debug objfiles; and it is important for the caller to know in which objfile the minimal symbol was actually found. The bulk of this patch is mechanical. 2014-02-26 Tom Tromey <tromey@redhat.com> * ada-lang.c (ada_update_initial_language): Update. (ada_main_name, ada_has_this_exception_support): Update. * ada-tasks.c (ada_tasks_inferior_data_sniffer): Update. * aix-thread.c (pdc_symbol_addrs, pd_enable): Update. * arm-tdep.c (arm_skip_stub): Update. * auxv.c (ld_so_xfer_auxv): Update. * avr-tdep.c (avr_scan_prologue): Update. * ax-gdb.c (gen_var_ref): Update. * breakpoint.c (struct breakpoint_objfile_data) <overlay_msym, longjmp_msym, terminate_msym, exception_msym>: Change type to bound_minimal_symbol. (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint): Update. * bsd-uthread.c (bsd_uthread_lookup_address): Update. * c-exp.y (classify_name): Update. * coffread.c (coff_symfile_read): Update. * common/agent.c (agent_look_up_symbols): Update. * d-lang.c (d_main_name): Update. * dbxread.c (find_stab_function_addr, end_psymtab): Update. * dec-thread.c (enable_dec_thread): Update. * dwarf2loc.c (call_site_to_target_addr): Update. * elfread.c (elf_gnu_ifunc_resolve_by_got): Update. * eval.c (evaluate_subexp_standard): Update. * findvar.c (struct minsym_lookup_data) <result>: Change type to bound_minimal_symbol. <objfile>: Remove. (minsym_lookup_iterator_cb, default_read_var_value): Update. * frame.c (inside_main_func): Update. * frv-tdep.c (frv_frame_this_id): Update. * gcore.c (call_target_sbrk): Update. * glibc-tdep.c (glibc_skip_solib_resolver): Update. * gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline): Update. * go-lang.c (go_main_name): Update. * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code) (hppa_hpux_find_import_stub_for_addr): Update. * hppa-tdep.c (hppa_extract_17, hppa_lookup_stub_minimal_symbol): Update. Change return type. * hppa-tdep.h (hppa_lookup_stub_minimal_symbol): Change return type. * jit.c (jit_breakpoint_re_set_internal): Update. * linux-fork.c (inferior_call_waitpid, checkpoint_command): Update. * linux-nat.c (get_signo): Update. * linux-thread-db.c (inferior_has_bug): Update * m32c-tdep.c (m32c_return_value) (m32c_m16c_address_to_pointer): Update. * m32r-tdep.c (m32r_frame_this_id): Update. * m68hc11-tdep.c (m68hc11_get_register_info): Update. * machoread.c (macho_resolve_oso_sym_with_minsym): Update. * minsyms.c (lookup_minimal_symbol_internal): Rename to lookup_minimal_symbol. Change return type. (lookup_minimal_symbol): Remove. (lookup_bound_minimal_symbol): Update. (lookup_minimal_symbol_text): Change return type. (lookup_minimal_symbol_solib_trampoline): Change return type. * minsyms.h (lookup_minimal_symbol, lookup_minimal_symbol_text) (lookup_minimal_symbol_solib_trampoline): Change return type. * mips-linux-tdep.c (mips_linux_skip_resolver): Update. * objc-lang.c (lookup_objc_class, lookup_child_selector) (value_nsstring, find_imps): Update. * obsd-tdep.c (obsd_skip_solib_resolver): Update. * p-lang.c (pascal_main_name): Update. * ppc-linux-tdep.c (ppc_linux_spe_context_lookup): Update. * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update. * proc-service.c (ps_pglobal_lookup): Update. * ravenscar-thread.c (get_running_thread_msymbol): Change return type. (has_ravenscar_runtime, get_running_thread_id): Update. * remote.c (remote_check_symbols): Update. * sol-thread.c (ps_pglobal_lookup): Update. * sol2-tdep.c (sol2_skip_solib_resolver): Update. * solib-dsbt.c (lm_base): Update. * solib-frv.c (lm_base, frv_relocate_section_addresses): Update. * solib-irix.c (locate_base): Update. * solib-som.c (som_solib_create_inferior_hook) (som_solib_desire_dynamic_linker_symbols, link_map_start): Update. * solib-spu.c (spu_enable_break): Update. * solib-svr4.c (elf_locate_base, enable_break): Update. * spu-tdep.c (spu_get_overlay_table, spu_catch_start) (flush_ea_cache): Update. * stabsread.c (define_symbol): Update. * symfile.c (simple_read_overlay_table): Update. * symtab.c (find_pc_sect_line): Update. * tracepoint.c (scope_info): Update. * tui-disasm.c (tui_get_begin_asm_address): Update. * value.c (value_static_field): Update.
2014-02-26change minsym representationTom Tromey1-2/+2
In a later patch we're going to change the minimal symbol address calculation to apply section offsets at the point of use. To make it simpler to catch potential problem spots, this patch changes the representation of minimal symbols and introduces new minimal-symbol-specific variants of the various accessors. This is necessary because it would be excessively ambitious to try to convert all the symbol types at once. The core of this change is just renaming a field in minimal_symbol; the rest is just a fairly mechanical rewording. 2014-02-26 Tom Tromey <tromey@redhat.com> * symtab.h (struct minimal_symbol) <mginfo>: Rename from ginfo. (MSYMBOL_VALUE, MSYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_BYTES) (MSYMBOL_BLOCK_VALUE, MSYMBOL_VALUE_CHAIN, MSYMBOL_LANGUAGE) (MSYMBOL_SECTION, MSYMBOL_OBJ_SECTION, MSYMBOL_NATURAL_NAME) (MSYMBOL_LINKAGE_NAME, MSYMBOL_PRINT_NAME, MSYMBOL_DEMANGLED_NAME) (MSYMBOL_SET_LANGUAGE, MSYMBOL_SEARCH_NAME) (MSYMBOL_MATCHES_SEARCH_NAME, MSYMBOL_SET_NAMES): New macros. * ada-lang.c (ada_main_name): Update. (ada_lookup_simple_minsym): Update. (ada_make_symbol_completion_list): Update. (ada_add_standard_exceptions): Update. * ada-tasks.c (read_atcb, ada_tasks_inferior_data_sniffer): Update. * aix-thread.c (pdc_symbol_addrs, pd_enable): Update. * amd64-windows-tdep.c (amd64_skip_main_prologue): Update. * arm-tdep.c (skip_prologue_function): Update. (arm_skip_stack_protector, arm_skip_stub): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. (arm_wince_skip_main_prologue): Update. * auxv.c (ld_so_xfer_auxv): Update. * avr-tdep.c (avr_scan_prologue): Update. * ax-gdb.c (gen_var_ref): Update. * block.c (call_site_for_pc): Update. * blockframe.c (get_pc_function_start): Update. (find_pc_partial_function_gnu_ifunc): Update. * breakpoint.c (create_overlay_event_breakpoint): Update. (create_longjmp_master_breakpoint): Update. (create_std_terminate_master_breakpoint): Update. (create_exception_master_breakpoint): Update. (resolve_sal_pc): Update. * bsd-uthread.c (bsd_uthread_lookup_address): Update. * btrace.c (ftrace_print_function_name, ftrace_function_switched): Update. * c-valprint.c (c_val_print): Update. * coff-pe-read.c (add_pe_forwarded_sym): Update. * coffread.c (coff_symfile_read): Update. * common/agent.c (agent_look_up_symbols): Update. * dbxread.c (find_stab_function_addr): Update. (end_psymtab): Update. * dwarf2loc.c (call_site_to_target_addr): Update. (func_verify_no_selftailcall): Update. (tailcall_dump): Update. (call_site_find_chain_1): Update. (dwarf_expr_reg_to_entry_parameter): Update. * elfread.c (elf_gnu_ifunc_record_cache): Update. (elf_gnu_ifunc_resolve_by_got): Update. * f-valprint.c (info_common_command): Update. * findvar.c (read_var_value): Update. * frame.c (get_prev_frame_1): Update. (inside_main_func): Update. * frv-tdep.c (frv_skip_main_prologue): Update. (frv_frame_this_id): Update. * glibc-tdep.c (glibc_skip_solib_resolver): Update. * gnu-v2-abi.c (gnuv2_value_rtti_type): Update. * gnu-v3-abi.c (gnuv3_rtti_type): Update. (gnuv3_skip_trampoline): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline): Update. (hppa64_hpux_in_solib_call_trampoline): Update. (hppa_hpux_skip_trampoline_code): Update. (hppa64_hpux_search_dummy_call_sequence): Update. (hppa_hpux_find_import_stub_for_addr): Update. (hppa_hpux_find_dummy_bpaddr): Update. * hppa-tdep.c (hppa_symbol_address) (hppa_lookup_stub_minimal_symbol): Update. * i386-tdep.c (i386_skip_main_prologue): Update. (i386_pe_skip_trampoline_code): Update. * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Update. * infcall.c (get_function_name): Update. * infcmd.c (until_next_command): Update. * jit.c (jit_breakpoint_re_set_internal): Update. (jit_inferior_init): Update. * linespec.c (minsym_found): Update. (add_minsym): Update. * linux-fork.c (info_checkpoints_command): Update. * linux-nat.c (get_signo): Update. * linux-thread-db.c (inferior_has_bug): Update. * m32c-tdep.c (m32c_return_value): Update. (m32c_m16c_address_to_pointer): Update. (m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_frame_this_id): Update. * m68hc11-tdep.c (m68hc11_get_register_info): Update. * machoread.c (macho_resolve_oso_sym_with_minsym): Update. * maint.c (maintenance_translate_address): Update. * minsyms.c (add_minsym_to_hash_table): Update. (add_minsym_to_demangled_hash_table): Update. (msymbol_objfile): Update. (lookup_minimal_symbol): Update. (iterate_over_minimal_symbols): Update. (lookup_minimal_symbol_text): Update. (lookup_minimal_symbol_by_pc_name): Update. (lookup_minimal_symbol_solib_trampoline): Update. (lookup_minimal_symbol_by_pc_section_1): Update. (lookup_minimal_symbol_and_objfile): Update. (prim_record_minimal_symbol_full): Update. (compare_minimal_symbols): Update. (compact_minimal_symbols): Update. (build_minimal_symbol_hash_tables): Update. (install_minimal_symbols): Update. (terminate_minimal_symbol_table): Update. (find_solib_trampoline_target): Update. (minimal_symbol_upper_bound): Update. * mips-linux-tdep.c (mips_linux_skip_resolver): Update. * mips-tdep.c (mips_stub_frame_sniffer): Update. (mips_skip_pic_trampoline_code): Update. * msp430-tdep.c (msp430_skip_trampoline_code): Update. * objc-lang.c (selectors_info): Update. (classes_info): Update. (find_methods): Update. (find_imps): Update. (find_objc_msgsend): Update. * objfiles.c (objfile_relocate1): Update. * objfiles.h (ALL_OBJFILE_MSYMBOLS): Update. * obsd-tdep.c (obsd_skip_solib_resolver): Update. * p-valprint.c (pascal_val_print): Update. * parse.c (write_exp_msymbol): Update. * ppc-linux-tdep.c (powerpc_linux_in_dynsym_resolve_code) (ppc_linux_spe_context_lookup, ppc_elfv2_skip_entrypoint): Update. * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update. * printcmd.c (build_address_symbolic): Update. (sym_info): Update. (address_info): Update. * proc-service.c (ps_pglobal_lookup): Update. * psymtab.c (find_pc_sect_psymtab_closer): Update. (find_pc_sect_psymtab): Update. * python/py-framefilter.c (py_print_frame): Update. * ravenscar-thread.c (get_running_thread_id): Update. * record-btrace.c (btrace_call_history, btrace_get_bfun_name): Update. * remote.c (remote_check_symbols): Update. * rs6000-tdep.c (rs6000_skip_main_prologue): Update. (rs6000_skip_trampoline_code): Update. * sh64-tdep.c (sh64_elf_make_msymbol_special): Update. * sol2-tdep.c (sol2_skip_solib_resolver): Update. * solib-dsbt.c (lm_base): Update. * solib-frv.c (lm_base): Update. (main_got): Update. * solib-irix.c (locate_base): Update. * solib-som.c (som_solib_create_inferior_hook): Update. (som_solib_desire_dynamic_linker_symbols): Update. (link_map_start): Update. * solib-spu.c (spu_enable_break): Update. (ocl_enable_break): Update. * solib-svr4.c (elf_locate_base): Update. (enable_break): Update. * spu-tdep.c (spu_get_overlay_table): Update. (spu_catch_start): Update. (flush_ea_cache): Update. * stabsread.c (define_symbol): Update. (scan_file_globals): Update. * stack.c (find_frame_funname): Update. (frame_info): Update. * symfile.c (simple_read_overlay_table): Update. (simple_overlay_update): Update. * symmisc.c (dump_msymbols): Update. * symtab.c (fixup_section): Update. (find_pc_sect_line): Update. (skip_prologue_sal): Update. (search_symbols): Update. (print_msymbol_info): Update. (rbreak_command): Update. (MCOMPLETION_LIST_ADD_SYMBOL): New macro. (completion_list_objc_symbol): Update. (default_make_symbol_completion_list_break_on): Update. * tracepoint.c (scope_info): Update. * tui/tui-disasm.c (tui_find_disassembly_address): Update. (tui_get_begin_asm_address): Update. * valops.c (find_function_in_inferior): Update. * value.c (value_static_field): Update. (value_fn_field): Update.
2014-01-13replace XMALLOC with XNEWTom Tromey3-5/+5
This replaces XMALLOC with XNEW, and removes XMALLOC. The only non-mechanical bit here was remembering to edit gdbarch.sh. 2014-01-13 Tom Tromey <tromey@redhat.com> * defs.h (XMALLOC): Remove. * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cli-out.c (struct ui_out *): Likewise. * cli/cli-dump.c (add_dump_command): Likewise. (add_dump_command): Likewise. * complaints.c (get_complaints): Likewise. (find_complaint): Likewise. * dwarf2-frame.c (execute_cfa_program): Likewise. * dwarf2read.c (abbrev_table_read_table): Likewise. * gdbarch.sh: Likewise. * gdbarch.c: Rebuild. * inf-ttrace.c (inf_ttrace_add_page): Likewise. * interps.c (interp_new): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * mi/mi-console.c (mi_console_file_new): Likewise. * mi/mi-interp.c (mi_interpreter_init): Likewise. * mi/mi-out.c (mi_out_new): Likewise. * mi/mi-parse.c (mi_parse): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * observer.c (xalloc_observer_list_node): Likewise. * regcache.c (regcache_xmalloc_1): Likewise. * reggroups.c (reggroup_new): Likewise. (_initialize_reggroup): Likewise. * registry.c (register_data_with_cleanup): Likewise. * remote.c (remote_notif_stop_alloc_reply): Likewise. * ser-base.c (serial_ttystate): Likewise. * ser-mingw.c (make_pipe_state): Likewise. * ser-pipe.c (pipe_open): Likewise. * serial.c (serial_open): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_add_content_elements): Likewise. * tui/tui-file.c (tui_file_new): Likewise. * tui/tui-out.c (tui_out_new): Likewise. * ui-file.c (mem_file_new): Likewise. * ui-out.c (push_level): Likewise. (make_cleanup_ui_out_end): Likewise. (append_header_to_list): Likewise. (ui_out_new): Likewise. * user-regs.c (user_reg_add_builtin): Likewise.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker32-32/+32
2013-11-18remove gdb_string.hTom Tromey12-12/+12
This removes gdb_string.h. This patch is purely mechanical. I created it by running the two commands: git rm common/gdb_string.h perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl] 2013-11-18 Tom Tromey <tromey@redhat.com> * common/gdb_string.h: Remove. * aarch64-tdep.c: Use string.h, not gdb_string.h. * ada-exp.y: Use string.h, not gdb_string.h. * ada-lang.c: Use string.h, not gdb_string.h. * ada-lex.l: Use string.h, not gdb_string.h. * ada-typeprint.c: Use string.h, not gdb_string.h. * ada-valprint.c: Use string.h, not gdb_string.h. * aix-thread.c: Use string.h, not gdb_string.h. * alpha-linux-tdep.c: Use string.h, not gdb_string.h. * alpha-mdebug-tdep.c: Use string.h, not gdb_string.h. * alpha-nat.c: Use string.h, not gdb_string.h. * alpha-osf1-tdep.c: Use string.h, not gdb_string.h. * alpha-tdep.c: Use string.h, not gdb_string.h. * alphanbsd-tdep.c: Use string.h, not gdb_string.h. * amd64-dicos-tdep.c: Use string.h, not gdb_string.h. * amd64-linux-nat.c: Use string.h, not gdb_string.h. * amd64-linux-tdep.c: Use string.h, not gdb_string.h. * amd64-nat.c: Use string.h, not gdb_string.h. * amd64-sol2-tdep.c: Use string.h, not gdb_string.h. * amd64fbsd-tdep.c: Use string.h, not gdb_string.h. * amd64obsd-tdep.c: Use string.h, not gdb_string.h. * arch-utils.c: Use string.h, not gdb_string.h. * arm-linux-nat.c: Use string.h, not gdb_string.h. * arm-linux-tdep.c: Use string.h, not gdb_string.h. * arm-tdep.c: Use string.h, not gdb_string.h. * arm-wince-tdep.c: Use string.h, not gdb_string.h. * armbsd-tdep.c: Use string.h, not gdb_string.h. * armnbsd-nat.c: Use string.h, not gdb_string.h. * armnbsd-tdep.c: Use string.h, not gdb_string.h. * armobsd-tdep.c: Use string.h, not gdb_string.h. * avr-tdep.c: Use string.h, not gdb_string.h. * ax-gdb.c: Use string.h, not gdb_string.h. * ax-general.c: Use string.h, not gdb_string.h. * bcache.c: Use string.h, not gdb_string.h. * bfin-tdep.c: Use string.h, not gdb_string.h. * breakpoint.c: Use string.h, not gdb_string.h. * build-id.c: Use string.h, not gdb_string.h. * buildsym.c: Use string.h, not gdb_string.h. * c-exp.y: Use string.h, not gdb_string.h. * c-lang.c: Use string.h, not gdb_string.h. * c-typeprint.c: Use string.h, not gdb_string.h. * c-valprint.c: Use string.h, not gdb_string.h. * charset.c: Use string.h, not gdb_string.h. * cli-out.c: Use string.h, not gdb_string.h. * cli/cli-cmds.c: Use string.h, not gdb_string.h. * cli/cli-decode.c: Use string.h, not gdb_string.h. * cli/cli-dump.c: Use string.h, not gdb_string.h. * cli/cli-interp.c: Use string.h, not gdb_string.h. * cli/cli-logging.c: Use string.h, not gdb_string.h. * cli/cli-script.c: Use string.h, not gdb_string.h. * cli/cli-setshow.c: Use string.h, not gdb_string.h. * cli/cli-utils.c: Use string.h, not gdb_string.h. * coffread.c: Use string.h, not gdb_string.h. * common/common-utils.c: Use string.h, not gdb_string.h. * common/filestuff.c: Use string.h, not gdb_string.h. * common/linux-procfs.c: Use string.h, not gdb_string.h. * common/linux-ptrace.c: Use string.h, not gdb_string.h. * common/signals.c: Use string.h, not gdb_string.h. * common/vec.h: Use string.h, not gdb_string.h. * core-regset.c: Use string.h, not gdb_string.h. * corefile.c: Use string.h, not gdb_string.h. * corelow.c: Use string.h, not gdb_string.h. * cp-abi.c: Use string.h, not gdb_string.h. * cp-support.c: Use string.h, not gdb_string.h. * cp-valprint.c: Use string.h, not gdb_string.h. * cris-tdep.c: Use string.h, not gdb_string.h. * d-lang.c: Use string.h, not gdb_string.h. * dbxread.c: Use string.h, not gdb_string.h. * dcache.c: Use string.h, not gdb_string.h. * demangle.c: Use string.h, not gdb_string.h. * dicos-tdep.c: Use string.h, not gdb_string.h. * disasm.c: Use string.h, not gdb_string.h. * doublest.c: Use string.h, not gdb_string.h. * dsrec.c: Use string.h, not gdb_string.h. * dummy-frame.c: Use string.h, not gdb_string.h. * dwarf2-frame.c: Use string.h, not gdb_string.h. * dwarf2loc.c: Use string.h, not gdb_string.h. * dwarf2read.c: Use string.h, not gdb_string.h. * elfread.c: Use string.h, not gdb_string.h. * environ.c: Use string.h, not gdb_string.h. * eval.c: Use string.h, not gdb_string.h. * event-loop.c: Use string.h, not gdb_string.h. * exceptions.c: Use string.h, not gdb_string.h. * exec.c: Use string.h, not gdb_string.h. * expprint.c: Use string.h, not gdb_string.h. * f-exp.y: Use string.h, not gdb_string.h. * f-lang.c: Use string.h, not gdb_string.h. * f-typeprint.c: Use string.h, not gdb_string.h. * f-valprint.c: Use string.h, not gdb_string.h. * fbsd-nat.c: Use string.h, not gdb_string.h. * findcmd.c: Use string.h, not gdb_string.h. * findvar.c: Use string.h, not gdb_string.h. * fork-child.c: Use string.h, not gdb_string.h. * frame.c: Use string.h, not gdb_string.h. * frv-linux-tdep.c: Use string.h, not gdb_string.h. * frv-tdep.c: Use string.h, not gdb_string.h. * gdb.c: Use string.h, not gdb_string.h. * gdb_bfd.c: Use string.h, not gdb_string.h. * gdbarch.c: Use string.h, not gdb_string.h. * gdbtypes.c: Use string.h, not gdb_string.h. * gnu-nat.c: Use string.h, not gdb_string.h. * gnu-v2-abi.c: Use string.h, not gdb_string.h. * gnu-v3-abi.c: Use string.h, not gdb_string.h. * go-exp.y: Use string.h, not gdb_string.h. * go-lang.c: Use string.h, not gdb_string.h. * go32-nat.c: Use string.h, not gdb_string.h. * hppa-hpux-tdep.c: Use string.h, not gdb_string.h. * hppa-linux-nat.c: Use string.h, not gdb_string.h. * hppanbsd-tdep.c: Use string.h, not gdb_string.h. * hppaobsd-tdep.c: Use string.h, not gdb_string.h. * i386-cygwin-tdep.c: Use string.h, not gdb_string.h. * i386-dicos-tdep.c: Use string.h, not gdb_string.h. * i386-linux-nat.c: Use string.h, not gdb_string.h. * i386-linux-tdep.c: Use string.h, not gdb_string.h. * i386-nto-tdep.c: Use string.h, not gdb_string.h. * i386-sol2-tdep.c: Use string.h, not gdb_string.h. * i386-tdep.c: Use string.h, not gdb_string.h. * i386bsd-tdep.c: Use string.h, not gdb_string.h. * i386gnu-nat.c: Use string.h, not gdb_string.h. * i386nbsd-tdep.c: Use string.h, not gdb_string.h. * i386obsd-tdep.c: Use string.h, not gdb_string.h. * i387-tdep.c: Use string.h, not gdb_string.h. * ia64-libunwind-tdep.c: Use string.h, not gdb_string.h. * ia64-linux-nat.c: Use string.h, not gdb_string.h. * inf-child.c: Use string.h, not gdb_string.h. * inf-ptrace.c: Use string.h, not gdb_string.h. * inf-ttrace.c: Use string.h, not gdb_string.h. * infcall.c: Use string.h, not gdb_string.h. * infcmd.c: Use string.h, not gdb_string.h. * inflow.c: Use string.h, not gdb_string.h. * infrun.c: Use string.h, not gdb_string.h. * interps.c: Use string.h, not gdb_string.h. * iq2000-tdep.c: Use string.h, not gdb_string.h. * irix5-nat.c: Use string.h, not gdb_string.h. * jv-exp.y: Use string.h, not gdb_string.h. * jv-lang.c: Use string.h, not gdb_string.h. * jv-typeprint.c: Use string.h, not gdb_string.h. * jv-valprint.c: Use string.h, not gdb_string.h. * language.c: Use string.h, not gdb_string.h. * linux-fork.c: Use string.h, not gdb_string.h. * linux-nat.c: Use string.h, not gdb_string.h. * lm32-tdep.c: Use string.h, not gdb_string.h. * m2-exp.y: Use string.h, not gdb_string.h. * m2-typeprint.c: Use string.h, not gdb_string.h. * m32c-tdep.c: Use string.h, not gdb_string.h. * m32r-linux-nat.c: Use string.h, not gdb_string.h. * m32r-linux-tdep.c: Use string.h, not gdb_string.h. * m32r-rom.c: Use string.h, not gdb_string.h. * m32r-tdep.c: Use string.h, not gdb_string.h. * m68hc11-tdep.c: Use string.h, not gdb_string.h. * m68k-tdep.c: Use string.h, not gdb_string.h. * m68kbsd-tdep.c: Use string.h, not gdb_string.h. * m68klinux-nat.c: Use string.h, not gdb_string.h. * m68klinux-tdep.c: Use string.h, not gdb_string.h. * m88k-tdep.c: Use string.h, not gdb_string.h. * macrocmd.c: Use string.h, not gdb_string.h. * main.c: Use string.h, not gdb_string.h. * mdebugread.c: Use string.h, not gdb_string.h. * mem-break.c: Use string.h, not gdb_string.h. * memattr.c: Use string.h, not gdb_string.h. * memory-map.c: Use string.h, not gdb_string.h. * mep-tdep.c: Use string.h, not gdb_string.h. * mi/mi-cmd-break.c: Use string.h, not gdb_string.h. * mi/mi-cmd-disas.c: Use string.h, not gdb_string.h. * mi/mi-cmd-env.c: Use string.h, not gdb_string.h. * mi/mi-cmd-stack.c: Use string.h, not gdb_string.h. * mi/mi-cmd-var.c: Use string.h, not gdb_string.h. * mi/mi-cmds.c: Use string.h, not gdb_string.h. * mi/mi-console.c: Use string.h, not gdb_string.h. * mi/mi-getopt.c: Use string.h, not gdb_string.h. * mi/mi-interp.c: Use string.h, not gdb_string.h. * mi/mi-main.c: Use string.h, not gdb_string.h. * mi/mi-parse.c: Use string.h, not gdb_string.h. * microblaze-rom.c: Use string.h, not gdb_string.h. * microblaze-tdep.c: Use string.h, not gdb_string.h. * mingw-hdep.c: Use string.h, not gdb_string.h. * minidebug.c: Use string.h, not gdb_string.h. * minsyms.c: Use string.h, not gdb_string.h. * mips-irix-tdep.c: Use string.h, not gdb_string.h. * mips-linux-tdep.c: Use string.h, not gdb_string.h. * mips-tdep.c: Use string.h, not gdb_string.h. * mips64obsd-tdep.c: Use string.h, not gdb_string.h. * mipsnbsd-tdep.c: Use string.h, not gdb_string.h. * mipsread.c: Use string.h, not gdb_string.h. * mn10300-linux-tdep.c: Use string.h, not gdb_string.h. * mn10300-tdep.c: Use string.h, not gdb_string.h. * monitor.c: Use string.h, not gdb_string.h. * moxie-tdep.c: Use string.h, not gdb_string.h. * mt-tdep.c: Use string.h, not gdb_string.h. * nbsd-tdep.c: Use string.h, not gdb_string.h. * nios2-linux-tdep.c: Use string.h, not gdb_string.h. * nto-procfs.c: Use string.h, not gdb_string.h. * nto-tdep.c: Use string.h, not gdb_string.h. * objc-lang.c: Use string.h, not gdb_string.h. * objfiles.c: Use string.h, not gdb_string.h. * opencl-lang.c: Use string.h, not gdb_string.h. * osabi.c: Use string.h, not gdb_string.h. * osdata.c: Use string.h, not gdb_string.h. * p-exp.y: Use string.h, not gdb_string.h. * p-lang.c: Use string.h, not gdb_string.h. * p-typeprint.c: Use string.h, not gdb_string.h. * parse.c: Use string.h, not gdb_string.h. * posix-hdep.c: Use string.h, not gdb_string.h. * ppc-linux-nat.c: Use string.h, not gdb_string.h. * ppc-sysv-tdep.c: Use string.h, not gdb_string.h. * ppcfbsd-tdep.c: Use string.h, not gdb_string.h. * ppcnbsd-tdep.c: Use string.h, not gdb_string.h. * ppcobsd-tdep.c: Use string.h, not gdb_string.h. * printcmd.c: Use string.h, not gdb_string.h. * procfs.c: Use string.h, not gdb_string.h. * prologue-value.c: Use string.h, not gdb_string.h. * python/py-auto-load.c: Use string.h, not gdb_string.h. * python/py-gdb-readline.c: Use string.h, not gdb_string.h. * ravenscar-thread.c: Use string.h, not gdb_string.h. * regcache.c: Use string.h, not gdb_string.h. * registry.c: Use string.h, not gdb_string.h. * remote-fileio.c: Use string.h, not gdb_string.h. * remote-m32r-sdi.c: Use string.h, not gdb_string.h. * remote-mips.c: Use string.h, not gdb_string.h. * remote-sim.c: Use string.h, not gdb_string.h. * remote.c: Use string.h, not gdb_string.h. * reverse.c: Use string.h, not gdb_string.h. * rs6000-aix-tdep.c: Use string.h, not gdb_string.h. * ser-base.c: Use string.h, not gdb_string.h. * ser-go32.c: Use string.h, not gdb_string.h. * ser-mingw.c: Use string.h, not gdb_string.h. * ser-pipe.c: Use string.h, not gdb_string.h. * ser-tcp.c: Use string.h, not gdb_string.h. * ser-unix.c: Use string.h, not gdb_string.h. * serial.c: Use string.h, not gdb_string.h. * sh-tdep.c: Use string.h, not gdb_string.h. * sh64-tdep.c: Use string.h, not gdb_string.h. * shnbsd-tdep.c: Use string.h, not gdb_string.h. * skip.c: Use string.h, not gdb_string.h. * sol-thread.c: Use string.h, not gdb_string.h. * solib-dsbt.c: Use string.h, not gdb_string.h. * solib-frv.c: Use string.h, not gdb_string.h. * solib-osf.c: Use string.h, not gdb_string.h. * solib-spu.c: Use string.h, not gdb_string.h. * solib-target.c: Use string.h, not gdb_string.h. * solib.c: Use string.h, not gdb_string.h. * somread.c: Use string.h, not gdb_string.h. * source.c: Use string.h, not gdb_string.h. * sparc-nat.c: Use string.h, not gdb_string.h. * sparc-sol2-tdep.c: Use string.h, not gdb_string.h. * sparc-tdep.c: Use string.h, not gdb_string.h. * sparc64-tdep.c: Use string.h, not gdb_string.h. * sparc64fbsd-tdep.c: Use string.h, not gdb_string.h. * sparc64nbsd-tdep.c: Use string.h, not gdb_string.h. * sparcnbsd-tdep.c: Use string.h, not gdb_string.h. * spu-linux-nat.c: Use string.h, not gdb_string.h. * spu-multiarch.c: Use string.h, not gdb_string.h. * spu-tdep.c: Use string.h, not gdb_string.h. * stabsread.c: Use string.h, not gdb_string.h. * stack.c: Use string.h, not gdb_string.h. * std-regs.c: Use string.h, not gdb_string.h. * symfile.c: Use string.h, not gdb_string.h. * symmisc.c: Use string.h, not gdb_string.h. * symtab.c: Use string.h, not gdb_string.h. * target.c: Use string.h, not gdb_string.h. * thread.c: Use string.h, not gdb_string.h. * tilegx-linux-nat.c: Use string.h, not gdb_string.h. * tilegx-tdep.c: Use string.h, not gdb_string.h. * top.c: Use string.h, not gdb_string.h. * tracepoint.c: Use string.h, not gdb_string.h. * tui/tui-command.c: Use string.h, not gdb_string.h. * tui/tui-data.c: Use string.h, not gdb_string.h. * tui/tui-disasm.c: Use string.h, not gdb_string.h. * tui/tui-file.c: Use string.h, not gdb_string.h. * tui/tui-layout.c: Use string.h, not gdb_string.h. * tui/tui-out.c: Use string.h, not gdb_string.h. * tui/tui-regs.c: Use string.h, not gdb_string.h. * tui/tui-source.c: Use string.h, not gdb_string.h. * tui/tui-stack.c: Use string.h, not gdb_string.h. * tui/tui-win.c: Use string.h, not gdb_string.h. * tui/tui-windata.c: Use string.h, not gdb_string.h. * tui/tui-winsource.c: Use string.h, not gdb_string.h. * typeprint.c: Use string.h, not gdb_string.h. * ui-file.c: Use string.h, not gdb_string.h. * ui-out.c: Use string.h, not gdb_string.h. * user-regs.c: Use string.h, not gdb_string.h. * utils.c: Use string.h, not gdb_string.h. * v850-tdep.c: Use string.h, not gdb_string.h. * valarith.c: Use string.h, not gdb_string.h. * valops.c: Use string.h, not gdb_string.h. * valprint.c: Use string.h, not gdb_string.h. * value.c: Use string.h, not gdb_string.h. * varobj.c: Use string.h, not gdb_string.h. * vax-tdep.c: Use string.h, not gdb_string.h. * vaxnbsd-tdep.c: Use string.h, not gdb_string.h. * vaxobsd-tdep.c: Use string.h, not gdb_string.h. * windows-nat.c: Use string.h, not gdb_string.h. * xcoffread.c: Use string.h, not gdb_string.h. * xml-support.c: Use string.h, not gdb_string.h. * xstormy16-tdep.c: Use string.h, not gdb_string.h. * xtensa-linux-nat.c: Use string.h, not gdb_string.h.
2013-09-06OBVIOUS: Remove legacy comment referring to deprecated_init_ui_hook.Andrew Burgess1-2/+1
gdb/ChangeLog * tui/tui-io.c (tui_initialize_io): Remove legacy comment referring to deprecated_init_ui_hook.
2013-09-06Give every interpreter a command_loop_proc.Andrew Burgess1-0/+2
https://sourceware.org/ml/gdb-patches/2013-09/msg00179.html gdb/ChangeLog * cli/cli-interp.c (_initialize_cli_interp): Add a command_loop_proc to interp_procs. * event-top.c (cli_command_loop): Change signature to match interp_command_loop_ftype. * event-top.h (cli_command_loop): Same. * interps.c (interp_new): Require every interpreter to have a command_loop_proc. (current_interp_command_loop): Just call the command_loop_proc on the current interpreter. * tui/tui-interp.c (_initialize_tui_interp): Add a command_loop_proc to interp_procs.
2013-09-05[TUI] Rewrite register-changed decision bits.Pedro Alves1-40/+15
I stumbled on the TUI's register-changed decision code before (used to decided whether the register should be highlighted in the register window), for it is trying to compare all the different possible states and contents or previous/current register contents, and as such may need updating whenever the value machinery changes to have more state. It's just much simpler and more future proof to compare the previous/current printable representation instead. The bit in tui_register_format that returns early if the register has no name gets a bit in the way of the new prototype (what to return in that case? NULL, empty string, etc.?). Fortunately, that check isn't really necessary. All the callers will have already skipped unnamed registers. gdb/ 2013-09-05 Pedro Alves <palves@redhat.com> * tui/tui-regs.c (tui_register_format): Don't look at the register's name here. Return string representing register value instead of storing it in the data element. (tui_get_register): Compare register string representations instead of register value states and contents.
2013-09-05[PR tui/15933] TUI shows registers of the wrong frame the first timePedro Alves1-1/+1
I've stumbled on this by inspection. When the TUI's register window is first displayed, it always shows the registers of the current frame, instead of of the selected frame, which is obviously bogus. E.g., (gdb) step # into "function" (gdb) up (gdb) tui reg general # or C-x 2, C-x 2 shows the registers of "function", rather than the caller's. A subsequent: (gdb) frame or (gdb) down (gdb) up can be used as workaround to "fix" it. gdb/ 2013-09-05 Pedro Alves <palves@redhat.com> PR tui/15933 * tui/tui-regs.c (tui_show_registers): Show registers of the selected frame, not the current frame.
2013-07-01Delete pagination_enabled extern declaration in tui/tui-regs.c.Pedro Alves1-2/+0
It's declared in utils.h. gdb/ 2013-07-01 Pedro Alves <palves@redhat.com> * tui/tui-regs.c (pagination_enabled): Delete declaration.
2013-06-28[PR tui/14880] Fetch values before comparing their contents.Pedro Alves1-0/+7
PR tui/14880 shows a reproducer that triggers this assertion: int value_available_contents_eq (const struct value *val1, int offset1, const struct value *val2, int offset2, int length) { int idx1 = 0, idx2 = 0; /* This routine is used by printing routines, where we should already have read the value. Note that we only know whether a value chunk is available if we've tried to read it. */ gdb_assert (!val1->lazy && !val2->lazy); (top-gdb) bt #0 internal_error (file=0x88a26c "../../src/gdb/value.c", line=549, string=0x88a220 "%s: Assertion `%s' failed.") at ../../src/gdb/utils.c:844 #1 0x000000000057b9cd in value_available_contents_eq (val1=0x10fa900, offset1=0, val2=0x10f9e10, offset2=0, length=8) at ../../src/gdb/value.c:549 #2 0x00000000004fd756 in tui_get_register (frame=0xd5c430, data=0x109a548, regnum=0, changedp=0x109a560) at ../../src/gdb/tui/tui-regs.c:736 #3 0x00000000004fd111 in tui_check_register_values (frame=0xd5c430) at ../../src/gdb/tui/tui-regs.c:521 #4 0x0000000000501884 in tui_check_data_values (frame=0xd5c430) at ../../src/gdb/tui/tui-windata.c:234 #5 0x00000000004f976f in tui_selected_frame_level_changed_hook (level=1) at ../../src/gdb/tui/tui-hooks.c:222 #6 0x00000000006f0681 in select_frame (fi=0xd5c430) at ../../src/gdb/frame.c:1490 #7 0x00000000005dd94b in up_silently_base (count_exp=0x0) at ../../src/gdb/stack.c:2268 #8 0x00000000005dd985 in up_command (count_exp=0x0, from_tty=1) at ../../src/gdb/stack.c:2280 #9 0x00000000004dc5cf in do_cfunc (c=0xd3f720, args=0x0, from_tty=1) at ../../src/gdb/cli/cli-decode.c:113 #10 0x00000000004df664 in cmd_func (cmd=0xd3f720, args=0x0, from_tty=1) at ../../src/gdb/cli/cli-decode.c:1888 #11 0x00000000006e43e1 in execute_command (p=0xc7e6c2 "", from_tty=1) at ../../src/gdb/top.c:489 The fix is to fetch the value before comparing the contents. The comment additions to value.h explain why it can't be value_available_contents_eq itself that fetches the contents. Tested on x86_64 Fedora 17. gdb/ 2013-06-28 Pedro Alves <palves@redhat.com> PR tui/14880 * tui/tui-regs.c (tui_get_register): Fetch register value contents before checking whether they're available. * value.c (value_available_contents_eq): Change comment. * value.h (value_available_contents_eq): Expand comment.
2013-04-22 PR gdb/7912:Tom Tromey1-1/+2
* Makefile.in (SFILES): Add filestuff.c (COMMON_OBS): Add filestuff.o. (filestuff.o): New target. * auto-load.c (auto_load_objfile_script_1): Use gdb_fopen_cloexec. * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec. * cli/cli-cmds.c (shell_escape): Call close_most_fds. * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec. * common/agent.c (gdb_connect_sync_socket): Use gdb_socket_cloexec. * common/filestuff.c: New file. * common/filestuff.h: New file. * common/linux-osdata.c (linux_common_core_of_thread) (command_from_pid, commandline_from_pid, print_source_lines) (linux_xfer_osdata_shm, linux_xfer_osdata_sem) (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use gdb_fopen_cloexec. * common/linux-procfs.c (linux_proc_get_int) (linux_proc_pid_has_state): Use gdb_fopen_cloexec. * config.in, configure: Rebuild. * configure.ac: Don't check for sys/socket.h. Check for fdwalk, pipe2. * corelow.c (core_open): Use gdb_open_cloexec. * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec. * fork-child.c (fork_inferior): Call close_most_fds. * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec. * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec. * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals): Use gdb_fopen_cloexec. (linux_proc_xfer_partial, linux_proc_xfer_spu): Use gdb_open_cloexec. (linux_async_pipe): Use gdb_pipe_cloexec. * remote-fileio.c (remote_fileio_func_open): Use gdb_open_cloexec. * remote.c (remote_file_put, remote_file_get): Use gdb_fopen_cloexec. * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec, close_most_fds. * ser-tcp.c (net_open): Use gdb_socket_cloexec. * ser-unix.c (hardwire_open): Use gdb_open_cloexec. * solib.c (solib_find): Use gdb_open_cloexec. * source.c (openp, find_and_open_source): Use gdb_open_cloexec. * tracepoint.c (tfile_start): Use gdb_fopen_cloexec. (tfile_open): Use gdb_open_cloexec. * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec. * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec. * xml-support.c (xml_fetch_content_from_file): Use gdb_fopen_cloexec. * main.c (captured_main): Call notice_open_fds. gdbserver * Makefile.in (SFILES): Add filestuff.c. (OBS): Add filestuff.o. (filestuff.o): New target. * config.in, configure: Rebuild. * configure.ac: Check for fdwalk, pipe2.
2013-04-08 * minsyms.h (struct bound_minimal_symbol): New.Tom Tromey1-1/+1
(lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol. Remove objfile argument. (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc): Return bound_minimal_symbol. * minsyms.c (lookup_minimal_symbol_by_pc_1) (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc): Return bound_minimal_symbol. (in_gnu_ifunc_stub): Update. (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol. Remove 'objfile_p' argument. (lookup_solib_trampoline_symbol_by_pc): Update. * ada-tasks.c, amd64-windows-tdep.c, arm-tdep.c, arm-wince-tdep.c, block.c, blockframe.c, breakpoint.c, btrace.c, c-valprint.c, dwarf2loc.c, elfread.c, frame.c, frv-tdep.c, glibc-tdep.c, gnu-v2-abi.c, gnu-v3-abi.c, hppa-hpux-tdep.c, i386-tdep.c, ia64-tdep.c, infcall.c, infcmd.c, jit.c, linux-fork.c, m32c-tdep.c, m68hc11-tdep.c, maint.c, mips-tdep.c, p-valprint.c, parse.c, ppc-linux-tdep.c, ppc-sysv-tdep.c, printcmd.c, rs6000-tdep.c, sh64-tdep.c, stack.c, symtab.c, tui/tui-disasm.c: Update.
2013-02-03gdb/Jan Kratochvil10-30/+33
* source.c (print_source_lines_base): Print for TUI also "fullname". * tui/tui-data.c (init_content_element): Change tui_locator_element field to full_name. * tui/tui-data.h (struct tui_locator_element): Likewise. * tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename tui_update_locator_filename calls to tui_update_locator_fullname. Replace symtab->filename refererence by symtab_to_fullname call. * tui/tui-out.c (tui_field_string): Check for "fullname" now. * tui/tui-source.c (tui_set_source_content): Change tui_locator_element field to full_name. Replace symtab->filename refererence by symtab_to_fullname call. (tui_show_symtab_source): Rename parameter to fullname. Change tui_locator_element field to full_name. * tui/tui-stack.c: Include source.h. (tui_set_locator_filename): Rename the declaration to ... (tui_set_locator_fullname): ... here. Rename its parameter to fullname, updates its comment. (tui_set_locator_info): Rename its parameter to fullname. (tui_set_locator_filename): Rename the definition to ... (tui_set_locator_fullname): ... here. Rename its parameter to fullname, updates its comment. Change tui_locator_element field to full_name. (tui_set_locator_info): Rename its parameter to fullname. (tui_set_locator_info): Rename callee to tui_set_locator_fullname. (tui_update_locator_filename): Rename to ... (tui_update_locator_fullname): ... here. Rename callee to tui_set_locator_fullname. (tui_show_frame_info): Replace symtab->filename refererence by symtab_to_fullname call. * tui/tui-stack.h (tui_update_locator_filename): Rename to ... (tui_update_locator_fullname): ... here. * tui/tui-winsource.c (tui_display_main): Rename the callee to tui_update_locator_fullname. Replace symtab->filename refererence by symtab_to_fullname call. * tui/tui.c (tui_show_source): Rename its parameter to fullname. Rename the callee to tui_update_locator_fullname. * tui/tui.h (tui_show_source): Rename its parameter to fullname.
2013-02-03gdb/Jan Kratochvil1-7/+11
* ada-lang.c (user_select_syms): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise. (clear_command): New variable sal_fullname, initialize it. Replace compare_filenames_for_search by filename_cmp with sal_fullname. (say_where, update_static_tracepoint): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec): Likewise. * dwarf2read.c: Include source.h. (fixup_go_packaging): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * linespec.c (add_sal_to_sals): Rename variable filename to fullname. Replace symtab->filename refererences by symtab_to_filename_for_display calls. (create_sals_line_offset, convert_linespec_to_sals): New variable fullname, initialize it, replace symtab->filename reference by the variable. * linux-fork.c: Include source.h. (info_checkpoints_command): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * macroscope.c (sal_macro_scope): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * mdebugread.c: Include source.h. (psymtab_to_symtab_1): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file) (mi_cmd_file_list_exec_source_files): Likewise. * printcmd.c: Include source.h. (build_address_symbolic): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * psymtab.c (partial_map_symtabs_matching_filename) (read_psymtabs_with_fullname): Call compare_filenames_for_search also with psymtab_to_fullname. * python/py-symtab.c (stpy_str): Replace symtab->filename refererences by symtab_to_filename_for_display calls. (stpy_get_filename): New variable filename, initialize it, use instead of symtab->filename refererences. (salpy_str): Make variable filename const char *. Replace symtab->filename refererences by symtab_to_filename_for_display calls. * skip.c: Include source.h and filenames.h. (skip_file_command): Remove const from the symtab variable. Replace symtab->filename refererences by symtab_to_fullname call. (function_name_is_marked_for_skip): New variables searched_for_fullname and fullname. Use them to search also with symtab's fullname. * source.c (find_source_lines): Replace symtab->filename refererences by symtab_to_filename_for_display calls. (print_source_lines_base): New variable filename, use it instead of symtab->filename. Replace symtab->filename refererences by symtab_to_filename_for_display calls. (line_info, forward_search_command): Replace symtab->filename refererences by symtab_to_filename_for_display calls. (reverse_search_command): Replace symtab->filename refererences by symtab_to_filename_for_display calls. New variable filename for it. * stack.c (frame_info): Likewise. * symmisc.c: Include source.h. (dump_objfile, dump_symtab_1, maintenance_print_symbols) (maintenance_info_symtabs): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * symtab.c (iterate_over_some_symtabs): Call compare_filenames_for_search also with symtab_to_fullname. (lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace symtab->filename refererences by symtab_to_filename_for_display calls. (find_line_symtab): Replace symtab->filename refererences by symtab_to_filename_for_display calls. (file_matches): Replace filename_cmp by compare_filenames_for_search. (print_symbol_info): Make the last parameter const char *. New variable s_filename. Use it in the function. (symtab_symbol_info): Make the last_filename variable const char *. Replace symtab->filename refererences by symtab_to_filename_for_display calls. (rbreak_command): New variable fullname. Use it. Replace symtab->filename refererence by symtab_to_filename_for_display call. * tracepoint.c (set_traceframe_context, trace_find_line_command) (print_one_static_tracepoint_marker): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * tui/tui-source.c (tui_set_source_content): New variables filename and s_filename. Replace symtab->filename refererences by this variable. Replace other symtab->filename refererences by symtab_to_filename_for_display calls.
2013-02-03gdb/Jan Kratochvil4-12/+15
* tui/tui-data.c (init_win_info, tui_del_window, tui_free_window): Rename field reference filename to fullname. * tui/tui-data.h (struct tui_source_info): Rename field filename to fullname. New comment for it. * tui/tui-source.c (tui_set_source_content): Rename field reference filename to fullname. Initialize field by symtab_to_fullname now. * tui/tui-winsource.c (tui_update_breakpoint_info): Rename field reference filename to fullname. Use symtab_to_fullname during comparison.
2013-02-03gdb/Jan Kratochvil1-2/+2
Code cleanup. * breakpoint.c (print_breakpoint_location): Replace bp_location field source_file references by symtab field references. Remove variables sal and fullname. (momentary_breakpoint_from_master, add_location_to_breakpoint): (clear_command, say_where): Replace bp_location field source_file references by symtab field references. (bp_location_dtor): Remove the source_file reference. (update_static_tracepoint): Replace bp_location field source_file references by symtab field references. (breakpoint_free_objfile): New function. * breakpoint.h (struct bp_location): Extend the comment for line_number. Replace the field source_file by field symtab, extend its comment. (breakpoint_free_objfile): New declaration. * objfiles.c (free_objfile): Call breakpoint_free_objfile. * tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location field source_file references by symtab field references.
2013-01-312013-01-31 Aleksandar Ristovski <aristovski@qnx.com>Aleksandar Ristovski1-3/+1
* charset.c (intermediate_encoding): Remove unused i. * completer.c (signal_completer): Remove unused i. * continuations.c (discard_my_continuations_1): Remove unused continuation_ptr. * corelow.c (core_close): Remove unuseD name. (get_core_siginfo): Remove unused pid. * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused i, cps. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset. (loclist_describe_location): Remove unused first. * event-top.c (command_line_handler): Remove unused got_eof. * exec.c (exec_close_1): Remove unused need_symtab_cleanup. (resize_section_table): Remove unused old_value. * gdb_bfd.c (gdb_bfd_map_section): Remove unused header. * gnu-v3-abi.c (compute_vtable_size): Remove unused addr. * i386-tdep.c (i386_process_record): Remove unused rex. * infcmd.c (get_return_value): Remove unused uiout. * jv-lang.c (type_from_class): Remove unused is_array. * jv-valprint.c (java_val_print): Remove unused i. * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid. * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid. * m2-typeprint.c (m2_print_type): Remove unused code. * macroexp.c (get_character_constant): Remove unused body_start. (macro_stringify): Remove unused result. * objc-lang.c (find_methods): Remove unused gdbarch. * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2. * regcache.c (regcache_cooked_read): Remove unused gdbarch. * stack.c (print_frame_args): Remove unused summary. * thread.c (thread_apply_command): Remove unused p. * valarith.c (value_x_unop): Remove unused mangle_ptr. * valops.c (search_struct_method): Remove unused skip. * valprint.c (generic_val_print): Remove unused byte_order. * varobj.c (varobj_update): Remove unused changed. * cli/cli-cmds.c (complete_command): Remove unused next_item. (alias_command): Remove unused c. * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c. * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused format. (mi_cmd_data_write_memory): Remove unused word_format. (mi_cmd_data_write_memory_bytes): Remove unused r. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused p_start, p_end. * python/python.c (_initialize_python): Remove unused cmd_name, cmd. * tui/tui-disasm.c (tui_set_disassem_content): Remove unused line_width. Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00766.html
2013-01-10gdb/Jan Kratochvil2-2/+2
Code cleanup. * psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return type const char *. * tui/tui-source.c (tui_source_is_displayed): Make the parameter fname const char *. * tui/tui-source.h (tui_source_is_displayed): Likewise.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker32-46/+32
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-12-24gdb/Jan Kratochvil1-1/+1
Code cleanup. * dwarf2read.c (fixup_go_packaging): Do not check symtab->FILENAME for NULL. * linespec.c (add_sal_to_sals): Likewise. * psympriv.h (allocate_psymtab): Add ATTRIBUTE_NONNULL. * stack.c (print_frame): Do not check symtab->FILENAME for NULL. * symfile.h (allocate_symtab): Add ATTRIBUTE_NONNULL. * symtab.h (struct symtab): Add comment it is never NULL for filename. * tracepoint.c (set_traceframe_context): Do not check symtab->FILENAME for NULL. * tui/tui-source.c (tui_set_source_content): Likewise.
2012-11-20 ARI fixes: sprintf rule.Pierre Muller3-4/+5
Replace sprintf function calls for char arrays by calls to xsnprintf calls. * arm-tdep.c (arm_push_dummy_call): Replace sprintf by xsnprintf. (arm_dwarf_reg_to_regnum, arm_return_value): Ditto. (arm_neon_quad_read, arm_pseudo_read): Ditto. (arm_neon_quad_write, arm_pseudo_write): Ditto. * breakpoint.c (condition_completer): Ditto. (create_tracepoint_from_upload): Ditto. * dwarf2read.c (file_full_name): Ditto. * gcore.c (gcore_command): Ditto. * gnu-nat.c (proc_string, gnu_pid_to_str): Ditto. * go32-nat.c (go32_sysinfo): Ditto. * interps.c (interp_set): Ditto. * m32c-tdep.c (make_types): Ditto. * ppc-linux-nat.c (fetch_register, store_register): Ditto. * remote-m32r-sdi.c (m32r_open): Ditto. * sol-thread.c (td_err_string): Ditto. (td_state_string, solaris_pid_to_str): Ditto. * symtab.c (gdb_mangle_name): Ditto. * cli/cli-script.c (execute_control_command): Ditto. (define_command, document_command): Ditto. * tui/tui-io.c (tui_rl_display_match_list): Ditto. * tui/tui-stack.c (tui_make_status_line): Ditto. * tui/tui-win.c (tui_update_gdb_sizes): Ditto.
2012-11-10* tui/tui.c (tui_rl_command_key): Switch to TUI_ONE_COMMAND_MODEStephane Carrez2-3/+10
while executing the gdb command. (tui_rl_startup_hook): Do not switch back to TUI_SINGLE_KEY_MODE if we are called from prompt_for_continue. * tui/tui-io.c (tui_redisplay_readline): Likewise.
2012-11-10PR tui/9584Stephane Carrez1-6/+7
* tui/tui.c (tui_rl_command_key): Do not call execute_command but insert the command to execute in readline's buffer.
2012-11-08* tui/tui-hooks.c (tui_about_to_proceed): New function.Stephane Carrez1-16/+9
(tui_target_wait_hook): Remove. (tui_install_hooks): Install the about_to_proceed observer. (tui_remove_hooks): And remove it here.
2012-11-08* tui/tui-hooks.c (tui_inferior_exit): New function.Stephane Carrez1-5/+11
(tui_detach_hook): Remove. (tui_install_hooks): Install the inferior exit observer. (tui_remove_hooks): Remove it.
2012-08-27Check if TUI_SRC_WIN is not NULL before referencing itH.J. Lu1-1/+2
PR tui/14486 * tui/tui-source.c (tui_source_is_displayed): Check if TUI_SRC_WIN is not NULL before referencing it.
2012-05-242012-05-24 Pedro Alves <palves@redhat.com>Pedro Alves1-1/+10
PR tui/14159 * tui/tui-hooks.c (tui_query_hook): Pre-compute the question string, instead of reusing the va_list argument.
2012-04-25avoid a few strncpy-induced buffer overrunsJim Meyering1-0/+1
* procfs.c (procfs_make_note_section): Be sure to NUL-terminate fname and psargs before trying to concatenate. * tui/tui-stack.c (tui_get_function_from_frame): NUL-terminate "name" before applying strchr.
2012-03-162012-03-16 Chris January <chris.january@allinea.com>Tom Tromey1-4/+7
* tui-tui.win.c (tui_resize_all): Use erase and clearok instead of clear.
generated by cgit v1.1 at 2024-11-29 09:27:50 +0000