| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
I was curious why updating readline caused so much to be to rebuilt,
so I look at all the uses of the readline headers. Most are included
for valid reasons (either readline directory or for tilde_expand); but
the includes in tracepoint.c didn't seem to be used.
This patch removes them. Tested by rebuilding.
gdb/ChangeLog
2019-08-13 Tom Tromey <tromey@adacore.com>
* tracepoint.c: Don't include readline.h or history.h.
|
|
With this patch, the help docs now respect 2 invariants:
* The first line of a command help is terminated by a '.' character.
* The last character of a command help is not a newline character.
Note that the changes for the last invariant were done by Tom, as part of :
[PATCH] Remove trailing newlines from help text
https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html
but some occurrences have been re-introduced since then.
Some help docs had to be rephrased/restructured to respect the above
invariants.
Before this patch, print_doc_line was printing the first line
of a command help documentation, but stopping at the first '.'
or ',' character.
This was giving inconsistent results :
* The first line of command helps was sometimes '.' terminated,
sometimes not.
* The first line of command helps was not always designed to be
readable/understandable/unambiguous when stopping at the first
'.' or ',' character.
This e.g. created the following inconsistencies/problems:
< catch exception -- Catch Ada exceptions
< catch handlers -- Catch Ada exceptions
< catch syscall -- Catch system calls by their names
< down-silently -- Same as the `down' command
while the new help is:
> catch exception -- Catch Ada exceptions, when raised.
> catch handlers -- Catch Ada exceptions, when handled.
> catch syscall -- Catch system calls by their names, groups and/or numbers.
> down-silently -- Same as the `down' command, but does not print anything.
Also, the command help doc should not be terminated by a newline
character, but this was not respected by all commands.
The cli-option -OPT framework re-introduced some occurences.
So, the -OPT build help framework was changed to not output newlines at the
end of %OPTIONS% replacement.
This patch changes the help documentations to ensure the 2 invariants
given above.
It implied to slightly rephrase or restructure some help docs.
Based on the above invariants, print_doc_line (called by
'apropos' and 'help' commands to print the first line of a command
help) now outputs the full first line of a command help.
This all results in a lot of small changes in the produced help docs.
There are less code changes than changes in the help docs, as a lot
of docs are produced by some code (e.g. the remote packet usage settings).
gdb/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-decode.h (print_doc_line): Add for_value_prefix argument.
* cli/cli-decode.c (print_doc_line): Likewise. It now prints
the full first line, except when FOR_VALUE_PREFIX. In this case,
the trailing '.' is not output, and the first character is uppercased.
(print_help_for_command): Update call to print_doc_line.
(print_doc_of_command): Likewise.
* cli/cli-setshow.c (deprecated_show_value_hack): Likewise.
* cli/cli-option.c (append_indented_doc): Do not append newline.
(build_help_option): Append newline after first appended_indented_doc
only if a second call is done.
(build_help): Append 2 new lines before each option, except the first
one.
* compile/compile.c (_initialize_compile): Add new lines after
%OPTIONS%, when not at the end of the help.
Change help doc or code
producing the help doc to respect the invariants.
* maint-test-options.c (_initialize_maint_test_options): Likewise.
Also removed the new line after 'Options:', as all other commands
do not put an empty line between 'Options:' and the first option.
* printcmd.c (_initialize_printcmd): Likewise.
* stack.c (_initialize_stack): Likewise.
* interps.c (interpreter_exec_cmd): Fix "Usage:" line that was
incorrectly telling COMMAND is optional.
* ada-lang.c (_initialize_ada_language): Change help doc or code
producing the help doc to respect the invariants.
* ada-tasks.c (_initialize_ada_tasks): Likewise.
* breakpoint.c (_initialize_breakpoint): Likewise.
* cli/cli-cmds.c (_initialize_cli_cmds): Likewise.
* cli/cli-logging.c (_initialize_cli_logging): Likewise.
* cli/cli-setshow.c (_initialize_cli_setshow): Likewise.
* cli/cli-style.c (cli_style_option::add_setshow_commands,
_initialize_cli_style): Likewise.
* corelow.c (core_target_info): Likewise.
* dwarf-index-cache.c (_initialize_index_cache): Likewise.
* dwarf2read.c (_initialize_dwarf2_read): Likewise.
* filesystem.c (_initialize_filesystem): Likewise.
* frame.c (_initialize_frame): Likewise.
* gnu-nat.c (add_task_commands): Likewise.
* infcall.c (_initialize_infcall): Likewise.
* infcmd.c (_initialize_infcmd): Likewise.
* interps.c (_initialize_interpreter): Likewise.
* language.c (_initialize_language): Likewise.
* linux-fork.c (_initialize_linux_fork): Likewise.
* maint-test-settings.c (_initialize_maint_test_settings): Likewise.
* maint.c (_initialize_maint_cmds): Likewise.
* memattr.c (_initialize_mem): Likewise.
* printcmd.c (_initialize_printcmd): Likewise.
* python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq,
_RegEx): Likewise.
* ravenscar-thread.c (_initialize_ravenscar): Likewise.
* record-btrace.c (_initialize_record_btrace): Likewise.
* record-full.c (_initialize_record_full): Likewise.
* record.c (_initialize_record): Likewise.
* regcache-dump.c (_initialize_regcache_dump): Likewise.
* regcache.c (_initialize_regcache): Likewise.
* remote.c (add_packet_config_cmd, init_remote_threadtests,
_initialize_remote): Likewise.
* ser-tcp.c (_initialize_ser_tcp): Likewise.
* serial.c (_initialize_serial): Likewise.
* skip.c (_initialize_step_skip): Likewise.
* source.c (_initialize_source): Likewise.
* stack.c (_initialize_stack): Likewise.
* symfile.c (_initialize_symfile): Likewise.
* symtab.c (_initialize_symtab): Likewise.
* target-descriptions.c (_initialize_target_descriptions): Likewise.
* top.c (init_main): Likewise.
* tracefile-tfile.c (tfile_target_info): Likewise.
* tracepoint.c (_initialize_tracepoint): Likewise.
* tui/tui-win.c (_initialize_tui_win): Likewise.
* utils.c (add_internal_problem_command): Likewise.
* valprint.c (value_print_option_defs): Likewise.
gdb/testsuite/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/style.exp: Update tests for help doc new invariants.
* gdb.base/help.exp: Likewise.
|
|
This renames ui_out::field_int to field_signed, and field_fmt_int to
field_fmt_signed; and changes the type of the "value" parameter from
int to LONGEST.
Tested by the buildbot.
gdb/ChangeLog
2019-07-17 Tom Tromey <tromey@adacore.com>
* ui-out.h (class ui_out) <field_signed, field_fmt_signed,
do_field_signed>: Rename. Change type of "value".
* ui-out.c (ui_out::field_signed): Rename from field_int.
Change type of "value".
(ui_out::field_fmt_signed): Rename from field_fmt_int. Change
type of "value".
* tui/tui-out.h (class tui_ui_out) <do_field_signed>: Rename from
do_field_int. Change type of "value".
* tui/tui-out.c (tui_ui_out::do_field_signed): Rename from
do_field_int. Change type of "value".
* tracepoint.c (trace_status_mi, tfind_1)
(print_one_static_tracepoint_marker): Update.
* thread.c (print_thread_info_1, print_selected_thread_frame):
Update.
* stack.c (print_frame, print_frame_info): Update.
* spu-tdep.c (info_spu_signal_command, info_spu_dma_cmdlist):
Update.
* source.c (print_source_lines_base): Update.
* skip.c (info_skip_command): Update.
* record-btrace.c (btrace_ui_out_decode_error)
(btrace_call_history_src_line): Update.
* python/py-framefilter.c (py_print_single_arg, py_print_frame):
Update.
* progspace.c (print_program_space): Update.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Update.
* mi/mi-out.h (class mi_ui_out) <do_field_signed>: Rename from
do_field_int. Change type of "value".
* mi/mi-out.c (mi_ui_out::do_table_begin)
(mi_ui_out::do_table_header): Update.
(mi_ui_out::do_field_signed): Rename from do_field_int. Change
type of "value".
* mi/mi-main.c (mi_cmd_thread_list_ids, print_one_inferior)
(mi_cmd_data_list_changed_registers, output_register)
(mi_cmd_data_read_memory, mi_load_progress)
(mi_cmd_trace_frame_collected): Update.
* mi/mi-interp.c (mi_on_normal_stop_1, mi_output_solib_attribs):
Update.
* mi/mi-cmd-var.c (print_varobj, mi_cmd_var_create)
(mi_cmd_var_delete, mi_cmd_var_info_num_children)
(mi_cmd_var_list_children, varobj_update_one): Update.
* mi/mi-cmd-stack.c (mi_cmd_stack_info_depth)
(mi_cmd_stack_list_args, list_arg_or_local): Update.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Update.
* inferior.c (print_inferior): Update.
* gdb_bfd.c (print_one_bfd): Update.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Update.
* darwin-nat-info.c (darwin_debug_regions_recurse): Update.
* cli-out.h (class cli_ui_out) <do_field_signed>: Rename from
do_field_int. Change type of "value".
* cli-out.c (cli_ui_out::do_field_signed): Rename from
do_field_int. Change type of "value".
* breakpoint.c (watchpoint_check, print_breakpoint_location)
(print_one_breakpoint_location, print_it_catch_fork)
(print_one_catch_fork, print_it_catch_vfork)
(print_one_catch_vfork, print_it_catch_solib)
(print_it_catch_exec, print_it_ranged_breakpoint)
(print_mention_watchpoint, print_mention_masked_watchpoint)
(bkpt_print_it, update_static_tracepoint): Update.
* break-catch-throw.c (print_it_exception_catchpoint): Update.
* break-catch-syscall.c (print_it_catch_syscall): Update.
* ada-tasks.c (print_ada_task_info): Update.
* ada-lang.c (print_it_exception, print_mention_exception):
Update.
|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
I noticed recently that some command had a trailing newline in its
"help" output. So, I temporarily hacked cli-decode.c to print
something when a new command was installed that had a trailing newline
in its help message, and wrote this patch, which removes all the ones
I could find this way. (There could still be a few more in *-nat
files.)
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-06-11 Tom Tromey <tromey@adacore.com>
* infcall.c (_initialize_infcall): Remove trailing newline from
help.
* user-regs.c (_initialize_user_regs): Remove trailing newline
from help.
* typeprint.c (_initialize_typeprint): Remove trailing newline
from help.
* reverse.c (_initialize_reverse): Remove trailing newlines from
help.
* tracepoint.c (_initialize_tracepoint): Remove trailing newlines
from help.
* language.c (add_set_language_command): Remove trailing newline
from help.
* infcmd.c (_initialize_infcmd): Remove trailing newlines from
help.
* disasm.c (_initialize_disasm): Remove trailing newline from
help.
* top.c (init_main): Remove trailing newline from help.
* interps.c (_initialize_interpreter): Remove trailing newline
from help.
* btrace.c (_initialize_btrace): Remove trailing newlines from
help.
* breakpoint.c (_initialize_breakpoint): Remove trailing newline
from help.
* python/python.c (_initialize_python): Remove trailing newline
from help.
* spu-tdep.c (_initialize_spu_tdep): Remove trailing newlines from
help.
* tui/tui-win.c (_initialize_tui_win): Remove trailing newlines
from help. Reformat some text.
* tui/tui-stack.c (_initialize_tui_stack): Remove trailing newline
from help.
* tui/tui-layout.c (_initialize_tui_layout): Remove trailing
newline from help.
|
|
This series is revisit of Siddhesh Poyarekar's patch from back in
2012. The last status on the patch is in the following gdb-patches
thread:
https://sourceware.org/ml/gdb-patches/2012-08/msg00562.html
It appears that Tom approved the patch, but Jan had some issues
with a compiler error that made the test fail on -m32 test runs.
He wrote up a hand-tweaked .S file to deal with it. Siddesh said
he would update tests. Then nothing.
Siddesh and Jan have both moved on since.
The patch originally required a large precursor patch to work.
I have whittled this down to/rewritten the bare minimum, and this
first patch is the result, changing the type of TYPE_LENGTH
to ULONGEST from unsigned int.
The majority of the changes involve changing printf format
strings to use %s and pulongest instead of %d.
gdb/ChangeLog:
* ada-lang.c (ada_template_to_fixed_record_type_1): Use
%s/pulongest for TYPE_LENGTH instead of %d in format
strings.
* ada-typerint.c (ada_print_type): Likewise.
* amd64-windows-tdep.c (amd64_windows_store_arg_in_reg): Likewise.
* compile/compile-c-support.c (generate_register_struct): Likewise.
* gdbtypes.c (recursive_dump_type): Likewise.
* gdbtypes.h (struct type) <length>: Change type to ULONGEST.
* m2-typeprint.c (m2_array): Use %s/pulongest for TYPE_LENGTH
instead of %d in format strings.
* riscv-tdep.c (riscv_type_alignment): Cast second argument
to std::min to ULONGEST.
* symmisc.c (print_symbol): Use %s/pulongest for TYPE_LENGTH
instead of %d in format strings.
* tracepoint.c (info_scope_command): Likewise.
* typeprint.c (print_offset_data::update)
(print_offset_data::finish): Likewise.
* xtensa-tdep.c (xtensa_store_return_value)
(xtensa_push_dummy_call): Likewise.
|
|
This changes all includes to use the form "common/filename.h" rather
than just "filename.h". This was written by a script.
gdb/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* xtensa-linux-nat.c: Fix common/ includes.
* xml-support.h: Fix common/ includes.
* xml-support.c: Fix common/ includes.
* x86-linux-nat.c: Fix common/ includes.
* windows-nat.c: Fix common/ includes.
* varobj.h: Fix common/ includes.
* varobj.c: Fix common/ includes.
* value.c: Fix common/ includes.
* valops.c: Fix common/ includes.
* utils.c: Fix common/ includes.
* unittests/xml-utils-selftests.c: Fix common/ includes.
* unittests/utils-selftests.c: Fix common/ includes.
* unittests/unpack-selftests.c: Fix common/ includes.
* unittests/tracepoint-selftests.c: Fix common/ includes.
* unittests/style-selftests.c: Fix common/ includes.
* unittests/string_view-selftests.c: Fix common/ includes.
* unittests/scoped_restore-selftests.c: Fix common/ includes.
* unittests/scoped_mmap-selftests.c: Fix common/ includes.
* unittests/scoped_fd-selftests.c: Fix common/ includes.
* unittests/rsp-low-selftests.c: Fix common/ includes.
* unittests/parse-connection-spec-selftests.c: Fix common/
includes.
* unittests/optional-selftests.c: Fix common/ includes.
* unittests/offset-type-selftests.c: Fix common/ includes.
* unittests/observable-selftests.c: Fix common/ includes.
* unittests/mkdir-recursive-selftests.c: Fix common/ includes.
* unittests/memrange-selftests.c: Fix common/ includes.
* unittests/memory-map-selftests.c: Fix common/ includes.
* unittests/lookup_name_info-selftests.c: Fix common/ includes.
* unittests/function-view-selftests.c: Fix common/ includes.
* unittests/environ-selftests.c: Fix common/ includes.
* unittests/copy_bitwise-selftests.c: Fix common/ includes.
* unittests/common-utils-selftests.c: Fix common/ includes.
* unittests/cli-utils-selftests.c: Fix common/ includes.
* unittests/array-view-selftests.c: Fix common/ includes.
* ui-file.c: Fix common/ includes.
* tui/tui-io.c: Fix common/ includes.
* tracepoint.h: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* tracefile-tfile.c: Fix common/ includes.
* top.h: Fix common/ includes.
* top.c: Fix common/ includes.
* thread.c: Fix common/ includes.
* target/waitstatus.h: Fix common/ includes.
* target/waitstatus.c: Fix common/ includes.
* target.h: Fix common/ includes.
* target.c: Fix common/ includes.
* target-memory.c: Fix common/ includes.
* target-descriptions.c: Fix common/ includes.
* symtab.h: Fix common/ includes.
* symfile.c: Fix common/ includes.
* stap-probe.c: Fix common/ includes.
* spu-linux-nat.c: Fix common/ includes.
* sparc-nat.c: Fix common/ includes.
* source.c: Fix common/ includes.
* solib.c: Fix common/ includes.
* solib-target.c: Fix common/ includes.
* ser-unix.c: Fix common/ includes.
* ser-tcp.c: Fix common/ includes.
* ser-pipe.c: Fix common/ includes.
* ser-base.c: Fix common/ includes.
* selftest-arch.c: Fix common/ includes.
* s12z-tdep.c: Fix common/ includes.
* rust-exp.y: Fix common/ includes.
* rs6000-aix-tdep.c: Fix common/ includes.
* riscv-tdep.c: Fix common/ includes.
* remote.c: Fix common/ includes.
* remote-notif.h: Fix common/ includes.
* remote-fileio.h: Fix common/ includes.
* remote-fileio.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* record-btrace.c: Fix common/ includes.
* python/python.c: Fix common/ includes.
* python/py-type.c: Fix common/ includes.
* python/py-inferior.c: Fix common/ includes.
* progspace.h: Fix common/ includes.
* producer.c: Fix common/ includes.
* procfs.c: Fix common/ includes.
* proc-api.c: Fix common/ includes.
* printcmd.c: Fix common/ includes.
* ppc-linux-nat.c: Fix common/ includes.
* parser-defs.h: Fix common/ includes.
* osdata.c: Fix common/ includes.
* obsd-nat.c: Fix common/ includes.
* nat/x86-linux.c: Fix common/ includes.
* nat/x86-linux-dregs.c: Fix common/ includes.
* nat/x86-dregs.h: Fix common/ includes.
* nat/x86-dregs.c: Fix common/ includes.
* nat/ppc-linux.c: Fix common/ includes.
* nat/mips-linux-watch.h: Fix common/ includes.
* nat/mips-linux-watch.c: Fix common/ includes.
* nat/linux-waitpid.c: Fix common/ includes.
* nat/linux-ptrace.h: Fix common/ includes.
* nat/linux-ptrace.c: Fix common/ includes.
* nat/linux-procfs.c: Fix common/ includes.
* nat/linux-personality.c: Fix common/ includes.
* nat/linux-osdata.c: Fix common/ includes.
* nat/linux-namespaces.c: Fix common/ includes.
* nat/linux-btrace.h: Fix common/ includes.
* nat/linux-btrace.c: Fix common/ includes.
* nat/fork-inferior.c: Fix common/ includes.
* nat/amd64-linux-siginfo.c: Fix common/ includes.
* nat/aarch64-sve-linux-ptrace.c: Fix common/ includes.
* nat/aarch64-linux.c: Fix common/ includes.
* nat/aarch64-linux-hw-point.h: Fix common/ includes.
* nat/aarch64-linux-hw-point.c: Fix common/ includes.
* namespace.h: Fix common/ includes.
* mips-linux-tdep.c: Fix common/ includes.
* minsyms.c: Fix common/ includes.
* mi/mi-parse.h: Fix common/ includes.
* mi/mi-main.c: Fix common/ includes.
* mi/mi-cmd-env.c: Fix common/ includes.
* memrange.h: Fix common/ includes.
* memattr.c: Fix common/ includes.
* maint.h: Fix common/ includes.
* maint.c: Fix common/ includes.
* main.c: Fix common/ includes.
* machoread.c: Fix common/ includes.
* location.c: Fix common/ includes.
* linux-thread-db.c: Fix common/ includes.
* linux-nat.c: Fix common/ includes.
* linux-fork.c: Fix common/ includes.
* inline-frame.c: Fix common/ includes.
* infrun.c: Fix common/ includes.
* inflow.c: Fix common/ includes.
* inferior.h: Fix common/ includes.
* inferior.c: Fix common/ includes.
* infcmd.c: Fix common/ includes.
* inf-ptrace.c: Fix common/ includes.
* inf-child.c: Fix common/ includes.
* ia64-linux-nat.c: Fix common/ includes.
* i387-tdep.c: Fix common/ includes.
* i386-tdep.c: Fix common/ includes.
* i386-linux-tdep.c: Fix common/ includes.
* i386-linux-nat.c: Fix common/ includes.
* i386-go32-tdep.c: Fix common/ includes.
* i386-fbsd-tdep.c: Fix common/ includes.
* i386-fbsd-nat.c: Fix common/ includes.
* guile/scm-type.c: Fix common/ includes.
* guile/guile.c: Fix common/ includes.
* go32-nat.c: Fix common/ includes.
* gnu-nat.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbarch-selftests.c: Fix common/ includes.
* gdb_usleep.c: Fix common/ includes.
* gdb_select.h: Fix common/ includes.
* gdb_bfd.c: Fix common/ includes.
* gcore.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* findvar.c: Fix common/ includes.
* fbsd-nat.c: Fix common/ includes.
* event-top.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* dwarf2read.c: Fix common/ includes.
* dwarf2loc.c: Fix common/ includes.
* dwarf2-frame.c: Fix common/ includes.
* dwarf-index-cache.c: Fix common/ includes.
* dtrace-probe.c: Fix common/ includes.
* disasm-selftests.c: Fix common/ includes.
* defs.h: Fix common/ includes.
* csky-tdep.c: Fix common/ includes.
* cp-valprint.c: Fix common/ includes.
* cp-support.h: Fix common/ includes.
* cp-support.c: Fix common/ includes.
* corelow.c: Fix common/ includes.
* completer.h: Fix common/ includes.
* completer.c: Fix common/ includes.
* compile/compile.c: Fix common/ includes.
* compile/compile-loc2c.c: Fix common/ includes.
* compile/compile-cplus-types.c: Fix common/ includes.
* compile/compile-cplus-symbols.c: Fix common/ includes.
* command.h: Fix common/ includes.
* cli/cli-dump.c: Fix common/ includes.
* cli/cli-cmds.c: Fix common/ includes.
* charset.c: Fix common/ includes.
* build-id.c: Fix common/ includes.
* btrace.h: Fix common/ includes.
* btrace.c: Fix common/ includes.
* breakpoint.h: Fix common/ includes.
* breakpoint.c: Fix common/ includes.
* ax.h:
(enum agent_op): Fix common/ includes.
* ax-general.c (struct aop_map): Fix common/ includes.
* ax-gdb.c: Fix common/ includes.
* auxv.c: Fix common/ includes.
* auto-load.c: Fix common/ includes.
* arm-tdep.c: Fix common/ includes.
* arch/riscv.c: Fix common/ includes.
* arch/ppc-linux-common.c: Fix common/ includes.
* arch/i386.c: Fix common/ includes.
* arch/arm.c: Fix common/ includes.
* arch/arm-linux.c: Fix common/ includes.
* arch/arm-get-next-pcs.c: Fix common/ includes.
* arch/amd64.c: Fix common/ includes.
* arch/aarch64.c: Fix common/ includes.
* arch/aarch64-insn.c: Fix common/ includes.
* arch-utils.c: Fix common/ includes.
* amd64-windows-tdep.c: Fix common/ includes.
* amd64-tdep.c: Fix common/ includes.
* amd64-sol2-tdep.c: Fix common/ includes.
* amd64-obsd-tdep.c: Fix common/ includes.
* amd64-nbsd-tdep.c: Fix common/ includes.
* amd64-linux-tdep.c: Fix common/ includes.
* amd64-linux-nat.c: Fix common/ includes.
* amd64-fbsd-tdep.c: Fix common/ includes.
* amd64-fbsd-nat.c: Fix common/ includes.
* amd64-dicos-tdep.c: Fix common/ includes.
* amd64-darwin-tdep.c: Fix common/ includes.
* agent.c: Fix common/ includes.
* ada-lang.h: Fix common/ includes.
* ada-lang.c: Fix common/ includes.
* aarch64-tdep.c: Fix common/ includes.
gdb/gdbserver/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* win32-low.c: Fix common/ includes.
* win32-i386-low.c: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* thread-db.c: Fix common/ includes.
* target.h: Fix common/ includes.
* symbol.c: Fix common/ includes.
* spu-low.c: Fix common/ includes.
* server.h: Fix common/ includes.
* server.c: Fix common/ includes.
* remote-utils.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* nto-x86-low.c: Fix common/ includes.
* notif.h: Fix common/ includes.
* mem-break.h: Fix common/ includes.
* lynx-low.c: Fix common/ includes.
* lynx-i386-low.c: Fix common/ includes.
* linux-x86-tdesc-selftest.c: Fix common/ includes.
* linux-x86-low.c: Fix common/ includes.
* linux-low.c: Fix common/ includes.
* inferiors.h: Fix common/ includes.
* i387-fp.c: Fix common/ includes.
* hostio.c: Fix common/ includes.
* hostio-errno.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbreplay.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* ax.c:
(enum gdb_agent_op): Fix common/ includes.
|
|
Coverity points out that gdb/tracepoint.c:parse_tracepoint_definition
can leak 'cond' in this line:
cond = (char *) xmalloc (2 * xlen + 1);
That can leak because we're in a loop and 'cond' may have already been
xmalloc'ed into in a previous iteration. That won't normally happen,
because we don't expect to see a tracepoint definition with multiple
conditions listed, but, it doesn't hurt to be pedantically correct,
in case some stub manages to send something odd back to GDB.
At first I thought I'd just replace the xmalloc call with:
cond = (char *) xrealloc (cond, 2 * xlen + 1);
and be done with it. However, my pedantic self realizes that
warning() can throw as well (due to pagination + Ctrl-C), so I fixed
it using gdb::unique_xmalloc_ptr instead.
While doing this, I noticed that these vectors in struct uploaded_tp:
std::vector<char *> actions;
std::vector<char *> step_actions;
hold heap-allocated strings, but nothing is freeing the strings,
AFAICS.
So I ended up switching all the heap-allocated strings in uploaded_tp
to unique pointers. This patch is the result of that.
I also wrote an alternative, but similar patch that uses std::string
throughout instead of gdb::unique_xmalloc_ptr, but in the end reverted
it because the code didn't look that much better, and I kind of
dislike replacing pointers with fat std::string's (3 or 4 times the
size of a pointer) in structures.
gdb/ChangeLog:
2019-01-10 Pedro Alves <palves@redhat.com>
* breakpoint.c (read_uploaded_action)
(create_tracepoint_from_upload): Adjust to use
gdb::unique_xmalloc_ptr.
* ctf.c (ctf_write_uploaded_tp):
(SET_ARRAY_FIELD): Use emplace_back.
(SET_STRING_FIELD): Adjust to use gdb::unique_xmalloc_ptr.
* tracefile-tfile.c (tfile_write_uploaded_tp):
* tracepoint.c (parse_tracepoint_definition): Adjust to use
gdb::unique_xmalloc_ptr.
* tracepoint.h (struct uploaded_tp) <cond, actions, step_actions,
at_string, cond_string, cmd_strings>: Replace char pointers
with gdb::unique_xmalloc_ptr.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This adds some output styling to the CLI.
A style is currently a foreground color, a background color, and an
intensity (dim or bold). (This list could be expanded depending on
terminal capabilities.)
A style can be applied while printing. For ui-out, this is done by
passing the style constant as an argument. For low-level cases,
fprintf_styled and fputs_styled are provided.
Users can control the style via a number of new set/show commands. In
the interest of not typing many nearly-identical documentation
strings, I automated this. On the down side, this is not very
i18n-friendly.
I've chose some default colors to use. I think it would be good to
enable this by default, so that when users start the new gdb, they
will see the new feature.
Stylizing is done if TERM is set and is not "dumb". This could be
improved when the TUI is available by using the curses has_colors
call. That is, the lowest layer could call this without committing to
using curses everywhere; see my other patch for TUI colorizing.
I considered adding a new "set_style" method to ui_file. However,
because the implementation had to interact with the pager code, I
didn't take this approach. But, one idea might be to put the isatty
check there and then have it defer to the lower layers.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* utils.h (set_output_style, fprintf_styled)
(fputs_styled): Declare.
* utils.c (applied_style, desired_style): New globals.
(emit_style_escape, set_output_style): New function.
(prompt_for_continue): Emit style escapes.
(fputs_maybe_filtered): Likewise.
(fputs_styled, fprintf_styled): New functions.
* ui-out.h (enum class ui_out_style_kind): New.
(class ui_out) <field_string, field_stream, do_field_string>: Add
style parameter.
* ui-out.c (ui_out::field_stream, ui_out::field_string): Add style
parameter.
* tui/tui-out.h (class tui_ui_out) <do_field_string>: Add style
parameter.
* tui/tui-out.c (tui_ui_out::do_field_string): Add style
parameter.
(tui_ui_out::do_field_string): Update.
* tracepoint.c (print_one_static_tracepoint_marker): Style
output.
* stack.c (print_frame_info, print_frame): Style output.
* source.c (print_source_lines_base): Style output.
* skip.c (info_skip_command): Style output.
* record-btrace.c (btrace_call_history_src_line): Style output.
(btrace_call_history): Likewise.
* python/py-framefilter.c (py_print_frame): Style output.
* mi/mi-out.h (class mi_ui_out) <do_field_string>: Add style
parameter.
* mi/mi-out.c (mi_ui_out::do_table_header)
(mi_ui_out::do_field_int): Update.
(mi_ui_out::do_field_string): Update.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Style output.
* cli/cli-style.h: New file.
* cli/cli-style.c: New file.
* cli-out.h (class cli_ui_out) <do_field_string>: Add style
parameter.
* cli-out.c (cli_ui_out::do_table_header)
(cli_ui_out::do_field_int, cli_ui_out::do_field_skip): Update.
(cli_ui_out::do_field_string): Add style parameter. Style the
output.
* breakpoint.c (print_breakpoint_location): Style output.
(update_static_tracepoint): Likewise.
* Makefile.in (SUBDIR_CLI_SRCS): Add cli-style.c.
(HFILES_NO_SRCDIR): Add cli-style.h.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: New file.
* gdb.base/style.c: New file.
|
|
This fixes all the straightforward -Wshadow=local warnings in gdb. A
few standard approaches are used here:
* Renaming an inner (or outer, but more commonly inner) variable;
* Lowering a declaration to avoid a clash;
* Moving a declaration into a more inner scope to avoid a clash,
including the special case of moving a declaration into a loop header.
I did not consider any of the changes in this patch to be particularly
noteworthy, though of course they should all still be examined.
gdb/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* ctf.c (SET_ARRAY_FIELD): Rename "u32".
* p-valprint.c (pascal_val_print): Split inner "i" variable.
* xtensa-tdep.c (xtensa_push_dummy_call): Declare "i" in loop
header.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Declare "val" in
more inner scope.
* xcoffread.c (read_xcoff_symtab): Rename inner "symbol".
* varobj.c (varobj_update): Rename inner "newobj",
"type_changed".
* valprint.c (generic_emit_char): Rename inner "buf".
* valops.c (find_overload_match): Rename inner "temp".
(value_struct_elt_for_reference): Declare "v" in more inner
scope.
* v850-tdep.c (v850_push_dummy_call): Rename "len".
* unittests/array-view-selftests.c (run_tests): Rename inner
"vec".
* tui/tui-stack.c (tui_show_frame_info): Declare "i" in loop
header.
* tracepoint.c (merge_uploaded_trace_state_variables): Declare
"tsv" in more inner scope.
(print_one_static_tracepoint_marker): Rename inner
"tuple_emitter".
* tic6x-tdep.c (tic6x_analyze_prologue): Declare "inst" lower.
(tic6x_push_dummy_call): Don't redeclare "addr".
* target-float.c: Declare "dto" lower.
* symtab.c (lookup_local_symbol): Rename inner "sym".
(find_pc_sect_line): Rename inner "pc".
* stack.c (print_frame): Don't redeclare "gdbarch".
(return_command): Rename inner "gdbarch".
* s390-tdep.c (s390_prologue_frame_unwind_cache): Renam inner
"sp".
* rust-lang.c (rust_internal_print_type): Declare "i" in loop
header.
* rs6000-tdep.c (ppc_process_record): Rename inner "addr".
* riscv-tdep.c (riscv_push_dummy_call): Declare "info" in inner
scope.
* remote.c (remote_target::update_thread_list): Don't redeclare
"tp".
(remote_target::process_initial_stop_replies): Rename inner
"thread".
(remote_target::remote_parse_stop_reply): Don't redeclare "p".
(remote_target::wait_as): Don't redeclare "stop_reply".
(remote_target::get_thread_local_address): Rename inner
"result".
(remote_target::get_tib_address): Likewise.
|
|
Since commit
56bcdbea2bed ("Let gdb.execute handle multi-line commands")
trying to use a command like gdb.execute("show commands") in Python
fails. GDB ends up trying to run the "commands" command.
The reason is that GDB gets confused with the special "commands"
command. In process_next_line, the lookup_cmd_1 function returns the
cmd_list_element representing the "commands" sub-command of "show".
Lower, we check the cmd_list_element to see if it matches various
control commands by name, including the "commands" command. This is
where we wrongfully conclude that the executed command must be
"commands", when in reality it was "show commands".
The fix proposed in this patch removes the comparisons by name, instead
comparing the cmd_list_element object by pointer with the objects
created at initialization time.
Tested on the buildbot, though on a single builder (Fedora-x86_64-m64).
gdb/ChangeLog:
PR python/23669
* breakpoint.c (commands_cmd_element): New.
(_initialize_breakpoint): Assign commands_cmd_element.
* breakpoint.h (commands_cmd_element): New.
* cli/cli-script.c (while_cmd_element, if_command,
define_cmd_element): New.
(command_name_equals): Remove.
(process_next_line): Compare commands by pointer, not by name.
(_initialize_cli_script): Assign the various cmd_list_element
variables.
* compile/compile.c (compile_cmd_element): New.
(_initialize_compile): Assign compile_cmd_element.
* compile/compile.h (compile_cmd_element): New.
* guile/guile.c (guile_cmd_element): New.
(install_gdb_commands): Assign guile_cmd_element.
* guile/guile.h (guile_cmd_element): New.
* python/python.c (python_cmd_element): New.
(_initialize_python): Assign python_cmd_element.
* python/python.h (python_cmd_element): New.
* tracepoint.c (while_stepping_cmd_element): New.
(_initialize_tracepoint): Assign while_stepping_cmd_element.
* tracepoint.h (while_stepping_cmd_element): New.
gdb/testsuite/ChangeLog:
PR python/23669
* gdb.python/python.exp: Test gdb.execute("show commands").
|
|
I searched for other spots that did not use the GNU style for
metasyntactic syntactic variables. This patch fixes most of the ones
I found in gdb proper. There are a few remaining in MI, but I was
unsure whether those should be touched.
gdb/ChangeLog
2018-09-16 Tom Tromey <tom@tromey.com>
* top.c (new_ui_command): Use GNU style for metasyntactic
variables.
* breakpoint.c (stopat_command): Use GNU style for metasyntactic
variables.
* maint.c (maintenance_translate_address): Remove "<>" around
text.
* interps.c (interpreter_exec_cmd): Use GNU style for
metasyntactic variables.
* nto-procfs.c (nto_procfs_target_info): Use GNU style for
metasyntactic variables.
* tracepoint.c (tfind_range_command): Use GNU style for
metasyntactic variables.
(tfind_outside_command): Likewise.
(_initialize_tracepoint): Likewise.
* remote.c (extended_remote_target::create_inferior): Use GNU
style for metasyntactic variables.
* sparc64-tdep.c (adi_examine_command): Use GNU style for
metasyntactic variables.
(adi_assign_command): Likewise.
gdb/testsuite/ChangeLog
2018-09-16 Tom Tromey <tom@tromey.com>
* gdb.base/new-ui.exp (do_execution_tests): Update.
* gdb.base/dbx.exp (test_breakpoints): Update.
|
|
This change/patch substitues BLOCK_ENTRY_PC for BLOCK_START in
places where BLOCK_START is used to obtain the address at which
execution should enter the block. Since blocks can now contain
non-contiguous ranges, the BLOCK_START - which is still be the
very lowest address in the block - might not be the same as
BLOCK_ENTRY_PC.
There is a change to infrun.c which is less obvious and less mechanical.
I'm posting it as a separate patch.
gdb/ChangeLog:
* ax-gdb.c (gen_var_ref): Use BLOCK_ENTRY_PC in place of
BLOCK_START.
* blockframe.c (get_pc_function_start): Likewise.
* compile/compile-c-symbols.c (convert_one_symbol): Likewise.
(gcc_symbol_address): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* compile/compile.c (get_expr_block_and_pc): Likewise.
* dwarf2loc.c (dwarf2_find_location_expression): Likewise.
(func_addr_to_tail_call_list): Likewise.
* findvar.c (default_read_var_value): Likewise.
* inline-frame.c (inline_frame_this_id): Likewise.
(skip-inline_frames): Likewise.
* infcmd.c (until_next_command): Likewise.
* linespec.c (convert_linespec_to_sals): Likewise.
* parse.c (parse_exp_in_context_1): Likewise.
* printcmd.c (build_address_symbolic): likewise.
(info_address_command): Likewise.
symtab.c (find_function_start_sal): Likewise.
(skip_prologue_sal): Likewise.
(find_function_alias_target): Likewise.
(find_gnu_ifunc): Likewise.
* stack.c (find_frame_funname): Likewise.
* symtab.c (fixup_symbol_section): Likewise.
(find_function_start_sal): Likewise.
(skip_prologue_sal): Likewsie.
(find_function_alias_target): Likewise.
(find_gnu_ifunc): Likewise.
* tracepoint.c (info_scope_command): Likewise.
* value.c (value_fn_field): Likewise.
|
|
This patch changes collection_list to allow larger register masks.
The mask is changed from an array to a vector and is initialized to
hold the maximum possible remote register number. The stringify
method is updated to resize temp_buf if needed.
gdb/ChangeLog:
2018-08-06 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* tracepoint.h (collection_list) <m_regs_mask>: Change type to
std::vector<unsigned char>.
* tracepoint.c (collection_list::collection_list): Remove
m_regs_mask initializer from initializer list. Resize
m_regs_mask using the largest remote register number.
(collection_list::add_remote_register): Remove size check on
m_regs_mask. Use at to access element.
(collection_list::stringify): Change type of temp_buf to
gdb::char_vector. Update uses of temp_buf. Resize if needed to
stringify the register mask. Use pack_hex_byte for the register
mask.
|
|
Currently, tracepoint register masks in the QTDP packets include both
internal and remote register numbers, as well as pseudo-register
numbers.
This patch changes this so that the mask only includes remote register
numbers.
Register numbers from agent expressions are already set in the mask
using remote numbers. Other tracepoint actions used internal numbers,
e.g. "collect $regs" or "collect $<pseudoreg>". To handle pseudoreg
numbers, an empty agent expression is created and ax_reg_mask is
called for this expression and the pseudoreg. This will cause the ax
to set its mask with the corresponding remote raw register
numbers (using ax_regs_mask, which calls
gdbarch_ax_pseudo_register_collect).
If ax_regs_mask and gdbarch_ax_pseudo_register_collect also generate
more ax bytecode, the ax is also appended to the collection list. It
isn't clear that this was the original intent for
gdbarch_ax_pseudo_register_collect, and none of the arches seem to do
this, but if this changes in the future, it should work.
The patch also refactors the code used by validate_action line to
validate axs into a function that is now called from every place that
generates axs. Previously, some parts of tracepoint.c that generated
axs didn't check if the ax length was greater than MAX_AGENT_EXPR_LEN.
gdb/ChangeLog:
2018-08-06 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* tracepoint.h (class collection_list) <add_register>: Remove.
<add_remote_register, add_ax_registers, add_local_register>:
Declare.
<add_memrange>: Add scope parameter.
* tracepoint.c (encode_actions_1): Likewise.
(collection_list::add_register): Rename to ...
(collection_list::add_remote_register): ... this. Update
comment.
(collection_list::add_ax_registers, add_local_register): New
methods.
(collection_list::add_memrange): Add scope parameter. Call
add_local_register instead of add_register.
(finalize_tracepoint_aexpr): New function.
(collection_list::collect_symbol): Update calls to add_memrange.
Call add_local_register instead of add_register. Call
add_ax_registers. Call finalize_tracepoint_aexpr.
(encode_actions_1): Get remote regnos for $reg action. Call
add_remote_register, add_ax_registers, and add_local_register.
Update call to add_memrange. Call finalize_tracepoint_aexpr.
(validate_actionline): Call finalize_tracepoint_aexpr.
|
|
This patch holds all the straightforward unused variable deletions.
gdb/ChangeLog
2018-07-22 Tom Tromey <tom@tromey.com>
* guile/scm-value.c (gdbscm_value_call): Remove unused variables.
* guile/scm-math.c (vlscm_unop_gdbthrow, vlscm_binop_gdbthrow)
(vlscm_convert_typed_value_from_scheme): Remove unused variable.
* buildsym-legacy.c (get_macro_table): Remove unused variable.
* stack.c (frame_apply_level_command): Remove unused variable.
* tic6x-tdep.c (tic6x_push_dummy_call): Remove unused variable.
* sparc64-tdep.c (adi_examine_command): Remove unused variable.
* rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Remove
unused variable.
* nios2-tdep.c (nios2_push_dummy_call): Remove unused variable.
* mep-tdep.c (mep_push_dummy_call): Remove unused variable.
* ada-lang.c (ada_lookup_symbol_list_worker): Remove unused
variable.
* amd64-tdep.c (amd64_supply_xsave): Remove unused variable.
* arm-tdep.c (arm_record_data_proc_misc_ld_str): Remove unused
variable.
* breakpoint.c (check_no_tracepoint_commands, update_watchpoint):
Remove unused variable.
* cli/cli-script.c (recurse_read_control_structure): Remove unused
variable.
* common/tdesc.c (print_xml_feature::visit): Remove unused
variable.
* compile/compile-object-load.c (store_regs): Remove unused
variables.
* complaints.c (clear_complaints): Remove unused variable.
* corelow.c (core_target_open): Remove unused variable.
* fbsd-tdep.c (fbsd_core_info_proc_status): Remove unused
variable.
* guile/scm-frame.c (gdbscm_frame_read_var): Remove unused
variable.
* guile/scm-symtab.c (stscm_print_sal_smob): Remove unused
variable.
* guile/scm-type.c (gdbscm_field_baseclass_p): Remove unused
variable.
* guile/scm-utils.c (gdbscm_parse_function_args): Remove unused
variable.
* hppa-tdep.c (hppa_stub_frame_unwind_cache): Remove unused
variable.
* ia64-tdep.c (examine_prologue): Remove unused variable.
* infcall.c (run_inferior_call): Remove unused variable.
* inferior.c (exit_inferior): Remove unused variable.
* infrun.c (infrun_thread_ptid_changed): Remove unused variable.
* linespec.c (decode_line_2): Remove unused variable.
* linux-nat.c (super_close): Remove.
* linux-tdep.c (linux_info_proc): Remove unused variable.
* mi/mi-main.c (mi_execute_command): Remove unused variable.
* microblaze-linux-tdep.c (microblaze_linux_sigtramp_cache):
Remove unused variable.
* parse.c (find_minsym_type_and_address): Remove unused variable.
* printcmd.c (info_symbol_command, printf_floating): Remove unused
variable.
* python/py-breakpoint.c (bppy_set_commands): Remove unused
variable.
* python/py-unwind.c (unwind_infopy_dealloc): Remove unused
variables.
* record-btrace.c (record_btrace_target::store_registers): Remove
unused variable.
(cmd_show_record_btrace_cpu): Remove unused variable.
* riscv-tdep.c (riscv_register_reggroup_p)
(riscv_push_dummy_call, riscv_return_value): Remove unused
variable.
* rust-exp.y (literal): Remove unused variable.
* rust-lang.c (rust_evaluate_subexp) <OP_RUST_ARARAY>: Remove
unused variable.
<STRUCTOP_ANONYMOUS>: Likewise.
* s390-linux-tdep.c (s390_linux_init_abi_31)
(s390_linux_init_abi_64): Remove unused variable.
* ser-ming2.c (ser_windows_read_prim, pipe_select_thread)
(file_select_thread, net_windows_open, _initialize_ser_windows):
Remove unused variables.
* symtab.c (find_pc_sect_line): Remove unused variable.
* target-memory.c (compute_garbled_blocks): Remove unused
variable.
(target_write_memory_blocks): Remove unused variable.
* target.c (target_stack::unpush): Remove unused variables.
* tracepoint.c (start_tracing, all_tracepoint_actions)
(merge_uploaded_trace_state_variables)
(print_one_static_tracepoint_marker): Remove unused variable.
* unittests/basic_string_view/element_access/char/1.cc (test01):
Remove unused variable.
* windows-nat.c (windows_continue, windows_add_all_dlls)
(do_initial_windows_stuff, windows_nat_target::create_inferior):
Remove unused variables.
|
|
This removes a use of VEC from breakpoint.h, also removing the
now-unnecessary breakpoint_p typedef.
This patch fixes a latent memory leak in
find_matching_tracepoint_location, which neglected to free the vector
returned by all_tracepoints.
Tested by the buildbot.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* tracepoint.c (process_tracepoint_on_disconnect, start_tracing)
(stop_tracing, tstatus_command)
(find_matching_tracepoint_location, merge_uploaded_tracepoints)
(print_one_static_tracepoint_marker): Update.
* breakpoint.c (static_tracepoints_here, all_tracepoints): Return
std::vector.
* breakpoint.h (breakpoint_p): Remove typedef. Don't declare
VEC.
(all_tracepoints, static_tracepoints_here): Return std::vector.
|
|
The recent C++ification of target_ops replaced references to the old
"current_target" squashed target throughout with references to a
"target_stack" pointer. I had picked the "target_stack" name very
early in the multi-target work, and managed to stick with it, even
though it's a bit of a misnomer, since it isn't really a "target
stack" object, but a pointer into the current top target in the stack.
As I'm splitting more pieces off of the multi-target branch, I've come
to think that it's better to rename it now. A following patch will
introduce a new class to represent a target stack, and "target_stack"
would be _its_ ideal name. (In the branch, the class is called
a_target_stack to work around the clash.)
Thus this commit renames target_stack to current_top_target and
replaces all references throughout. Also, while at it,
current_top_target is made a function instead of a pointer, to make it
possible to change its internal implementation without leaking
implementation details out. In a couple patches, the implementation
of the function will change to refer to a target stack object, and
then further down the multi-target work, it'll change again to find
the right target stack for the current inferior.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (target_stack): Delete.
(current_top_target): Declare function.
* target.c (target_stack): Delete.
(g_current_top_target): New.
(current_top_target): New function.
* auxv.c: Use current_top_target instead of target_stack
throughout.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* corefile.c: Likewise.
* elfread.c: Likewise.
* eval.c: Likewise.
* exceptions.c: Likewise.
* frame.c: Likewise.
* gdbarch-selftests.c: Likewise.
* gnu-v3-abi.c: Likewise.
* ia64-tdep.c: Likewise.
* ia64-vms-tdep.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* linespec.c: Likewise.
* linux-tdep.c: Likewise.
* minsyms.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-linux-tdep.c: Likewise.
* procfs.c: Likewise.
* regcache.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-tdep.c: Likewise.
* solib-aix.c: Likewise.
* solib-darwin.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* solib-target.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* spu-tdep.c: Likewise.
* symfile.c: Likewise.
* symtab.c: Likewise.
* target-descriptions.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* target.h: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* windows-tdep.c: Likewise.
* mi/mi-main.c: Likewise.
|
|
This changes the help text of a couple of commands in tracepoint.c to
follow the GNU style.
ChangeLog
2018-04-29 Tom Tromey <tom@tromey.com>
* tracepoint.c (_initialize_tracepoint): Update help text.
testsuite/ChangeLog
2018-04-30 Tom Tromey <tom@tromey.com>
* gdb.trace/tfind.exp: Update help tests.
|
|
I happened to notice that output_command_const still exists, but is
not needed any more -- commands are always const-correct now. This
patch removes this leftover.
2018-05-21 Tom Tromey <tom@tromey.com>
* printcmd.c (output_command): Remove.
(output_command_const): Rename to output_command.
* valprint.h (output_command): Rename from output_command_const.
* tracepoint.c (trace_dump_actions): Call output_command.
|
|
This changes trace_dump_actions to use std::string, removing a
cleanup.
Tested by the buildbot.
ChangeLog
2018-05-21 Tom Tromey <tom@tromey.com>
* tracepoint.c (trace_dump_actions): Use std::string.
|
|
This changes some functions in cli-script.c to use function_view
rather than a function pointer and closure argument. This simplifies
the code a bit and is useful in a subsequent patch.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* tracepoint.c (actions_command): Update.
* mi/mi-cmd-break.c (mi_command_line_array)
(mi_command_line_array_cnt, mi_command_line_array_ptr)
(mi_read_next_line): Remove.
(mi_cmd_break_commands): Update.
* cli/cli-script.h (read_command_lines, read_command_lines_1): Use
function_view.
* cli/cli-script.c (get_command_line): Update.
(process_next_line): Use function_view. Constify.
(recurse_read_control_structure, read_command_lines)
(read_command_lines_1): Change argument types to function_view.
(do_define_command, document_command): Update.
* breakpoint.h (check_tracepoint_command): Don't declare.
* breakpoint.c (check_tracepoint_command): Remove.
(commands_command_1, create_tracepoint_from_upload): Update.
|
|
The prompt argument to read_command_lines can be const. This patch
makes this change, and also removes some fixed-sized buffers in favor
of using string_printf.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* tracepoint.c (actions_command): Update.
* cli/cli-script.h (read_command_lines): Update.
* cli/cli-script.c (read_command_lines): Constify prompt_arg.
(MAX_TMPBUF): Remove define.
(define_command): Use string_printf.
(document_command): Likewise.
* breakpoint.c (commands_command_1): Update.
|
|
Currently command lines are reference counted using shared_ptr only
when attached to breakpoints. This patch changes gdb to use
shared_ptr in commands as well. This allows for the removal of
copy_command_lines.
Note that the change to execute_user_command explicitly makes a new
reference to the command line. This will be used in a later patch.
This simplifies struct command_line based on the observation that a
given command can have at most two child bodies: an "if" can have both
"then" and "else" parts. Perhaps the names I've chosen for the
replacements here are not very good -- your input requested.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* tracepoint.c (all_tracepoint_actions): Rename from
all_tracepoint_actions_and_cleanup. Change return type.
(actions_command, encode_actions_1, encode_actions)
(trace_dump_actions, tdump_command): Update.
* remote.c (remote_download_command_source): Update.
* python/python.c (gdbpy_eval_from_control_command)
(python_command, python_interactive_command): Update.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Update.
* guile/guile.c (guile_command)
(gdbscm_eval_from_control_command, guile_command): Update.
* compile/compile.c (compile_code_command)
(compile_print_command, compile_to_object): Update.
* cli/cli-script.h (struct command_lines_deleter): New.
(counted_command_line): New typedef.
(struct command_line): Add constructor, destructor.
<body_list>: Remove.
<body_list_0, body_list_1>: New members.
(command_line_up): Remove typedef.
(read_command_lines, read_command_lines_1, get_command_line):
Update.
(copy_command_lines): Don't declare.
* cli/cli-script.c (build_command_line): Use "new".
(get_command_line): Return counted_command_line.
(print_command_lines, execute_user_command)
(execute_control_command_1, while_command, if_command): Update.
(realloc_body_list): Remove.
(process_next_line, recurse_read_control_structure): Update.
(read_command_lines, read_command_lines_1): Return counted_command_line.
(free_command_lines): Use "delete".
(copy_command_lines): Remove.
(define_command, document_command, show_user_1): Update.
* cli/cli-decode.h (struct cmd_list_element) <user_commands>: Now
a counted_command_line.
* breakpoint.h (counted_command_line): Remove typedef.
(breakpoint_set_commands): Update.
* breakpoint.c (check_no_tracepoint_commands)
(validate_commands_for_breakpoint): Update.
(breakpoint_set_commands): Change commands to be a
counted_command_line.
(commands_command_1, update_dprintf_command_list)
(create_tracepoint_from_upload): Update.
|
|
I.e., use C++ virtual methods and inheritance instead of tables of
function pointers.
Unfortunately, there's no way to do a smooth transition. ALL native
targets in the tree must be converted at the same time. I've tested
all I could with cross compilers and with help from GCC compile farm,
but naturally I haven't been able to test many of the ports. Still, I
made a best effort to port everything over, and while I expect some
build problems due to typos and such, which should be trivial to fix,
I don't expect any design problems.
* Implementation notes:
- The flattened current_target is gone. References to current_target
or current_target.beneath are replaced with references to
target_stack (the top of the stack) directly.
- To keep "set debug target" working, this adds a new debug_stratum
layer that sits on top of the stack, prints the debug, and delegates
to the target beneath.
In addition, this makes the shortname and longname properties of
target_ops be virtual methods instead of data fields, and makes the
debug target defer those to the target beneath. This is so that
debug code sprinkled around that does "if (debugtarget) ..." can
transparently print the name of the target beneath.
A patch later in the series actually splits out the
shortname/longname methods to a separate structure, but I preferred
to keep that chance separate as it is associated with changing a bit
the design of how targets are registered and open.
- Since you can't check whether a C++ virtual method is overridden,
the old method of checking whether a target_ops implements a method
by comparing the function pointer must be replaced with something
else.
Some cases are fixed by adding a parallel "can_do_foo" target_ops
methods. E.g.,:
+ for (t = target_stack; t != NULL; t = t->beneath)
{
- if (t->to_create_inferior != NULL)
+ if (t->can_create_inferior ())
break;
}
Others are fixed by changing void return type to bool or int return
type, and have the default implementation return false or -1, to
indicate lack of support.
- make-target-delegates was adjusted to generate C++ classes and
methods.
It needed tweaks to grok "virtual" in front of the target method
name, and for the fact that methods are no longer function pointers.
(In particular, the current code parsing the return type was simple
because it could simply parse up until the '(' in '(*to_foo)'.
It now generates a couple C++ classes that inherit target_ops:
dummy_target and debug_target.
Since we need to generate the class declarations as well, i.e., we
need to emit methods twice, we now generate the code in two passes.
- The core_target global is renamed to avoid conflict with the
"core_target" class.
- ctf/tfile targets
init_tracefile_ops is replaced by a base class that is inherited by
both ctf and tfile.
- bsd-uthread
The bsd_uthread_ops_hack hack is gone. It's not needed because
nothing was extending a target created by bsd_uthread_target.
- remote/extended-remote targets
This is a first pass, just enough to C++ify target_ops.
A later pass will convert more free functions to methods, and make
remote_state be truly per remote instance, allowing multiple
simultaneous instances of remote targets.
- inf-child/"native" is converted to an actual base class
(inf_child_target), that is inherited by all native targets.
- GNU/Linux
The old weird double-target linux_ops mechanism in linux-nat.c, is
gone, replaced by adding a few virtual methods to linux-nat.h's
target_ops, called low_XXX, that the concrete linux-nat
implementations override. Sort of like gdbserver's
linux_target_ops, but simpler, for requiring only one
target_ops-like hierarchy, which spares implementing the same method
twice when we need to forward the method to a low implementation.
The low target simply reimplements the target_ops method directly in
that case.
There are a few remaining linux-nat.c hooks that would be better
converted to low_ methods like above too. E.g.:
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
linux_nat_set_forget_process
That'll be done in a follow up patch.
- We can no longer use functions like x86_use_watchpoints to install
custom methods on an arbitrary base target.
The patch replaces instances of such a pattern with template mixins.
For example memory_breakpoint_target defined in target.h, or
x86_nat_target in x86-nat.h.
- linux_trad_target, MIPS and Alpha GNU/Linux
The code in the new linux-nat-trad.h/c files which was split off of
inf-ptrace.h/c recently, is converted to a C++ base class, and used
by the MIPS and Alpha GNU/Linux ports.
- BSD targets
The
$architecture x NetBSD/OpenBSD/FreeBSD
support matrix complicates things a bit. There's common BSD target
code, and there's common architecture-specific code shared between
the different BSDs. Currently, all that is stiched together to form
a final target, via the i386bsd_target, x86bsd_target,
fbsd_nat_add_target functions etc.
This introduces new fbsd_nat_target, obsd_nat_target and
nbsd_nat_target classes that serve as base/prototype target for the
corresponding BSD variant.
And introduces generic i386/AMD64 BSD targets, to be used as
template mixin to build a final target. Similarly, a generic SPARC
target is added, used by both BSD and Linux ports.
- bsd_kvm_add_target, BSD libkvm target
I considered making bsd_kvm_supply_pcb a virtual method, and then
have each port inherit bsd_kvm_target and override that method, but
that was resulting in lots of unjustified churn, so I left the
function pointer mechanism alone.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@freebsd.org>
* target.h (enum strata) <debug_stratum>: New.
(struct target_ops) <all delegation methods>: Replace by C++
virtual methods, and drop "to_" prefix. All references updated
throughout.
<to_shortname, to_longname, to_doc, to_data,
to_have_steppable_watchpoint, to_have_continuable_watchpoint,
to_has_thread_control, to_attach_no_wait>: Delete, replaced by
virtual methods. All references updated throughout.
<can_attach, supports_terminal_ours, can_create_inferior,
get_thread_control_capabilities, attach_no_wait>: New
virtual methods.
<insert_breakpoint, remove_breakpoint>: Now
TARGET_DEFAULT_NORETURN methods.
<info_proc>: Now returns bool.
<to_magic>: Delete.
(OPS_MAGIC): Delete.
(current_target): Delete. All references replaced by references
to ...
(target_stack): ... this. New.
(target_shortname, target_longname): Adjust.
(target_can_run): Now a function declaration.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(memory_breakpoint_target): New template class.
(test_target_ops): Refactor as a C++ class with virtual methods.
* make-target-delegates (NAME_PART): Tighten.
(POINTER_PART, CP_SYMBOL): New.
(SIMPLE_RETURN_PART): Reimplement.
(VEC_RETURN_PART): Expect less.
(RETURN_PART, VIRTUAL_PART): New.
(METHOD): Adjust to C++ virtual methods.
(scan_target_h): Remove reference to C99.
(dname): Output "target_ops::" prefix.
(write_function_header): Adjust to output a C++ class method.
(write_declaration): New.
(write_delegator): Adjust to output a C++ class method.
(tdname): Output "dummy_target::" prefix.
(write_tdefault, write_debugmethod): Adjust to output a C++ class
method.
(tdefault_names, debug_names): Delete.
(return_types, tdefaults, styles, argtypes_array): New.
(top level): All methods are delegators.
(print_class): New.
(top level): Print dummy_target and debug_target classes.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_info_proc_what)
(target_debug_print_thread_control_capabilities)
(target_debug_print_thread_info_p): New.
* target.c (dummy_target): Delete.
(the_dummy_target, the_debug_target): New.
(target_stack): Now extern.
(set_targetdebug): Push/unpush debug target.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(add_target_with_completer): No longer call
complete_target_initialization.
(target_supports_terminal_ours): Use regular delegation.
(update_current_target): Delete.
(push_target): No longer check magic number. Don't call
update_current_target.
(unpush_target): Don't call update_current_target.
(target_is_pushed): No longer check magic number.
(target_require_runnable): Skip for all stratums over
process_stratum.
(target_ops::info_proc): New.
(target_info_proc): Use find_target_at and
find_default_run_target.
(target_supports_disable_randomization): Use regular delegation.
(target_get_osdata): Use find_target_at.
(target_ops::open, target_ops::close, target_ops::can_attach)
(target_ops::attach, target_ops::can_create_inferior)
(target_ops::create_inferior, target_ops::can_run)
(target_can_run): New.
(default_fileio_target): Use regular delegation.
(target_ops::fileio_open, target_ops::fileio_pwrite)
(target_ops::fileio_pread, target_ops::fileio_fstat)
(target_ops::fileio_close, target_ops::fileio_unlink)
(target_ops::fileio_readlink): New.
(target_fileio_open_1, target_fileio_unlink)
(target_fileio_readlink): Always call the target method. Handle
FILEIO_ENOSYS.
(return_zero, return_zero_has_execution): Delete.
(init_dummy_target): Delete.
(dummy_target::dummy_target, dummy_target::shortname)
(dummy_target::longname, dummy_target::doc)
(debug_target::debug_target, debug_target::shortname)
(debug_target::longname, debug_target::doc): New.
(target_supports_delete_record): Use regular delegation.
(setup_target_debug): Delete.
(maintenance_print_target_stack): Skip debug_stratum.
(initialize_targets): Instantiate the_dummy_target and
the_debug_target.
* auxv.c (target_auxv_parse): Remove 'ops' parameter. Adjust to
use target_stack.
(target_auxv_search, fprint_target_auxv): Adjust.
(info_auxv_command): Adjust to use target_stack.
* auxv.h (target_auxv_parse): Remove 'ops' parameter.
* exceptions.c (print_flush): Handle a NULL target_stack.
* regcache.c (target_ops_no_register): Refactor as class with
virtual methods.
* exec.c (exec_target): New class.
(exec_ops): Now an exec_target.
(exec_open, exec_close_1, exec_get_section_table)
(exec_xfer_partial, exec_files_info, exec_has_memory)
(exec_make_note_section): Refactor as exec_target methods.
(exec_file_clear, ignore, exec_remove_breakpoint, init_exec_ops):
Delete.
(exec_target::find_memory_regions): New.
(_initialize_exec): Don't call init_exec_ops.
* gdbcore.h (exec_file_clear): Delete.
* corefile.c (core_target): Delete.
(core_file_command): Adjust.
* corelow.c (core_target): New class.
(the_core_target): New.
(core_close): Remove target_ops parameter.
(core_close_cleanup): Adjust.
(core_target::close): New.
(core_open, core_detach, get_core_registers, core_files_info)
(core_xfer_partial, core_thread_alive, core_read_description)
(core_pid_to_str, core_thread_name, core_has_memory)
(core_has_stack, core_has_registers, core_info_proc): Rework as
core_target methods.
(ignore, core_remove_breakpoint, init_core_ops): Delete.
(_initialize_corelow): Initialize the_core_target.
* gdbcore.h (core_target): Delete.
(the_core_target): New.
* ctf.c: (ctf_target): New class.
(ctf_ops): Now a ctf_target.
(ctf_open, ctf_close, ctf_files_info, ctf_fetch_registers)
(ctf_xfer_partial, ctf_get_trace_state_variable_value)
(ctf_trace_find, ctf_traceframe_info): Refactor as ctf_target
methods.
(init_ctf_ops): Delete.
(_initialize_ctf): Don't call it.
* tracefile-tfile.c (tfile_target): New class.
(tfile_ops): Now a tfile_target.
(tfile_open, tfile_close, tfile_files_info)
(tfile_get_tracepoint_status, tfile_trace_find)
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value, tfile_traceframe_info):
Refactor as tfile_target methods.
(tfile_xfer_partial_features): Remove target_ops parameter.
(init_tfile_ops): Delete.
(_initialize_tracefile_tfile): Don't call it.
* tracefile.c (tracefile_has_all_memory, tracefile_has_memory)
(tracefile_has_stack, tracefile_has_registers)
(tracefile_thread_alive, tracefile_get_trace_status): Refactor as
tracefile_target methods.
(init_tracefile_ops): Delete.
(tracefile_target::tracefile_target): New.
* tracefile.h: Include "target.h".
(tracefile_target): New class.
(init_tracefile_ops): Delete.
* spu-multiarch.c (spu_multiarch_target): New class.
(spu_ops): Now a spu_multiarch_target.
(spu_thread_architecture, spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Refactor as
spu_multiarch_target methods.
(init_spu_ops): Delete.
(_initialize_spu_multiarch): Remove references to init_spu_ops,
complete_target_initialization.
* ravenscar-thread.c (ravenscar_thread_target): New class.
(ravenscar_ops): Now a ravenscar_thread_target.
(ravenscar_resume, ravenscar_wait, ravenscar_update_thread_list)
(ravenscar_thread_alive, ravenscar_pid_to_str)
(ravenscar_fetch_registers, ravenscar_store_registers)
(ravenscar_prepare_to_store, ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint)
(ravenscar_stopped_by_watchpoint, ravenscar_stopped_data_address)
(ravenscar_mourn_inferior, ravenscar_core_of_thread)
(ravenscar_get_ada_task_ptid): Refactor as ravenscar_thread_target
methods.
(init_ravenscar_thread_ops): Delete.
(_initialize_ravenscar): Remove references to
init_ravenscar_thread_ops and complete_target_initialization.
* bsd-uthread.c (bsd_uthread_ops_hack): Delete.
(bsd_uthread_target): New class.
(bsd_uthread_ops): Now a bsd_uthread_target.
(bsd_uthread_activate): Adjust to refer to bsd_uthread_ops.
(bsd_uthread_close, bsd_uthread_mourn_inferior)
(bsd_uthread_fetch_registers, bsd_uthread_store_registers)
(bsd_uthread_wait, bsd_uthread_resume, bsd_uthread_thread_alive)
(bsd_uthread_update_thread_list, bsd_uthread_extra_thread_info)
(bsd_uthread_pid_to_str): Refactor as bsd_uthread_target methods.
(bsd_uthread_target): Delete function.
(_initialize_bsd_uthread): Remove reference to
complete_target_initialization.
* bfd-target.c (target_bfd_data): Delete. Fields folded into ...
(target_bfd): ... this new class.
(target_bfd_xfer_partial, target_bfd_get_section_table)
(target_bfd_close): Refactor as target_bfd methods.
(target_bfd::~target_bfd): New.
(target_bfd_reopen): Adjust.
(target_bfd::close): New.
* record-btrace.c (record_btrace_target): New class.
(record_btrace_ops): Now a record_btrace_target.
(record_btrace_open, record_btrace_stop_recording)
(record_btrace_disconnect, record_btrace_close)
(record_btrace_async, record_btrace_info)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from, record_btrace_call_history)
(record_btrace_call_history_range)
(record_btrace_call_history_from, record_btrace_record_method)
(record_btrace_is_replaying, record_btrace_will_replay)
(record_btrace_xfer_partial, record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store)
(record_btrace_to_get_unwinder)
(record_btrace_to_get_tailcall_unwinder, record_btrace_resume)
(record_btrace_commit_resume, record_btrace_wait)
(record_btrace_stop, record_btrace_can_execute_reverse)
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint)
(record_btrace_update_thread_list, record_btrace_thread_alive)
(record_btrace_goto_begin, record_btrace_goto_end)
(record_btrace_goto, record_btrace_stop_replaying_all)
(record_btrace_execution_direction)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): Refactor as
record_btrace_target methods.
(init_record_btrace_ops): Delete.
(_initialize_record_btrace): Remove reference to
init_record_btrace_ops.
* record-full.c (RECORD_FULL_IS_REPLAY): Adjust to always refer to
the execution_direction global.
(record_full_base_target, record_full_target)
(record_full_core_target): New classes.
(record_full_ops): Now a record_full_target.
(record_full_core_ops): Now a record_full_core_target.
(record_full_target::detach, record_full_target::disconnect)
(record_full_core_target::disconnect)
(record_full_target::mourn_inferior, record_full_target::kill):
New.
(record_full_open, record_full_close, record_full_async): Refactor
as methods of the record_full_base_target class.
(record_full_resume, record_full_commit_resume): Refactor
as methods of the record_full_target class.
(record_full_wait, record_full_stopped_by_watchpoint)
(record_full_stopped_data_address)
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): Refactor as
methods of the record_full_base_target class.
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint):
Refactor as methods of the record_full_target class.
(record_full_can_execute_reverse, record_full_get_bookmark)
(record_full_goto_bookmark, record_full_execution_direction)
(record_full_record_method, record_full_info, record_full_delete)
(record_full_is_replaying, record_full_will_replay)
(record_full_goto_begin, record_full_goto_end, record_full_goto)
(record_full_stop_replaying): Refactor as methods of the
record_full_base_target class.
(record_full_core_resume, record_full_core_kill)
(record_full_core_fetch_registers)
(record_full_core_prepare_to_store)
(record_full_core_store_registers, record_full_core_xfer_partial)
(record_full_core_insert_breakpoint)
(record_full_core_remove_breakpoint)
(record_full_core_has_execution): Refactor
as methods of the record_full_core_target class.
(record_full_base_target::supports_delete_record): New.
(init_record_full_ops): Delete.
(init_record_full_core_ops): Delete.
(record_full_save): Refactor as method of the
record_full_base_target class.
(_initialize_record_full): Remove references to
init_record_full_ops and init_record_full_core_ops.
* remote.c (remote_target, extended_remote_target): New classes.
(remote_ops): Now a remote_target.
(extended_remote_ops): Now an extended_remote_target.
(remote_insert_fork_catchpoint, remote_remove_fork_catchpoint)
(remote_insert_vfork_catchpoint, remote_remove_vfork_catchpoint)
(remote_insert_exec_catchpoint, remote_remove_exec_catchpoint)
(remote_pass_signals, remote_set_syscall_catchpoint)
(remote_program_signals, )
(remote_thread_always_alive): Remove target_ops parameter.
(remote_thread_alive, remote_thread_name)
(remote_update_thread_list, remote_threads_extra_info)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(remote_get_ada_task_ptid, remote_close, remote_start_remote)
(remote_open): Refactor as methods of remote_target.
(extended_remote_open, extended_remote_detach)
(extended_remote_attach, extended_remote_post_attach):
(extended_remote_supports_disable_randomization)
(extended_remote_create_inferior): : Refactor as method of
extended_remote_target.
(remote_set_permissions, remote_open_1, remote_detach)
(remote_follow_fork, remote_follow_exec, remote_disconnect)
(remote_resume, remote_commit_resume, remote_stop)
(remote_interrupt, remote_pass_ctrlc, remote_terminal_inferior)
(remote_terminal_ours, remote_wait, remote_fetch_registers)
(remote_prepare_to_store, remote_store_registers)
(remote_flash_erase, remote_flash_done, remote_files_info)
(remote_kill, remote_mourn, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_watchpoint_addr_within_range)
(remote_remove_watchpoint, remote_region_ok_for_hw_watchpoint)
(remote_check_watch_resources, remote_stopped_by_sw_breakpoint)
(remote_supports_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint)
(remote_supports_stopped_by_hw_breakpoint)
(remote_stopped_by_watchpoint, remote_stopped_data_address)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory): Refactor as methods of remote_target.
(remote_write_qxfer, remote_read_qxfer): Remove target_ops
parameter.
(remote_xfer_partial, remote_get_memory_xfer_limit)
(remote_search_memory, remote_rcmd, remote_memory_map)
(remote_pid_to_str, remote_get_thread_local_address)
(remote_get_tib_address, remote_read_description): Refactor as
methods of remote_target.
(remote_target::fileio_open, remote_target::fileio_pwrite)
(remote_target::fileio_pread, remote_target::fileio_close): New.
(remote_hostio_readlink, remote_hostio_fstat)
(remote_filesystem_is_local, remote_can_execute_reverse)
(remote_supports_non_stop, remote_supports_disable_randomization)
(remote_supports_multi_process, remote_supports_cond_breakpoints)
(remote_supports_enable_disable_tracepoint)
(remote_supports_string_tracing)
(remote_can_run_breakpoint_commands, remote_trace_init)
(remote_download_tracepoint, remote_can_download_tracepoint)
(remote_download_trace_state_variable, remote_enable_tracepoint)
(remote_disable_tracepoint, remote_trace_set_readonly_regions)
(remote_trace_start, remote_get_trace_status)
(remote_get_tracepoint_status, remote_trace_stop)
(remote_trace_find, remote_get_trace_state_variable_value)
(remote_save_trace_data, remote_get_raw_trace_data)
(remote_set_disconnected_tracing, remote_core_of_thread)
(remote_set_circular_trace_buffer, remote_traceframe_info)
(remote_get_min_fast_tracepoint_insn_len)
(remote_set_trace_buffer_size, remote_set_trace_notes)
(remote_use_agent, remote_can_use_agent, remote_enable_btrace)
(remote_disable_btrace, remote_teardown_btrace)
(remote_read_btrace, remote_btrace_conf)
(remote_augmented_libraries_svr4_read, remote_load)
(remote_pid_to_exec_file, remote_can_do_single_step)
(remote_execution_direction, remote_thread_handle_to_thread_info):
Refactor as methods of remote_target.
(init_remote_ops, init_extended_remote_ops): Delete.
(remote_can_async_p, remote_is_async_p, remote_async)
(remote_thread_events, remote_upload_tracepoints)
(remote_upload_trace_state_variables): Refactor as methods of
remote_target.
(_initialize_remote): Remove references to init_remote_ops and
init_extended_remote_ops.
* remote-sim.c (gdbsim_target): New class.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_kill)
(gdbsim_load, gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume, gdbsim_interrupt)
(gdbsim_wait, gdbsim_prepare_to_store, gdbsim_xfer_partial)
(gdbsim_files_info, gdbsim_mourn_inferior, gdbsim_thread_alive)
(gdbsim_pid_to_str, gdbsim_has_all_memory, gdbsim_has_memory):
Refactor as methods of gdbsim_target.
(gdbsim_ops): Now a gdbsim_target.
(init_gdbsim_ops): Delete.
(gdbsim_cntrl_c): Adjust.
(_initialize_remote_sim): Remove reference to init_gdbsim_ops.
* amd64-linux-nat.c (amd64_linux_nat_target): New class.
(the_amd64_linux_nat_target): New.
(amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Refactor as methods of
amd64_linux_nat_target.
(_initialize_amd64_linux_nat): Adjust. Set linux_target.
* i386-linux-nat.c: Don't include "linux-nat.h".
(i386_linux_nat_target): New class.
(the_i386_linux_nat_target): New.
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers, i386_linux_resume): Refactor
as methods of i386_linux_nat_target.
(_initialize_i386_linux_nat): Adjust. Set linux_target.
* inf-child.c (inf_child_ops): Delete.
(inf_child_fetch_inferior_registers)
(inf_child_store_inferior_registers): Delete.
(inf_child_post_attach, inf_child_prepare_to_store): Refactor as
methods of inf_child_target.
(inf_child_target::supports_terminal_ours)
(inf_child_target::terminal_init)
(inf_child_target::terminal_inferior)
(inf_child_target::terminal_ours_for_output)
(inf_child_target::terminal_ours, inf_child_target::interrupt)
(inf_child_target::pass_ctrlc, inf_child_target::terminal_info):
New.
(inf_child_open, inf_child_disconnect, inf_child_close)
(inf_child_mourn_inferior, inf_child_maybe_unpush_target)
(inf_child_post_startup_inferior, inf_child_can_run)
(inf_child_pid_to_exec_file): Refactor as methods of
inf_child_target.
(inf_child_follow_fork): Delete.
(inf_child_target::can_create_inferior)
(inf_child_target::can_attach): New.
(inf_child_target::has_all_memory, inf_child_target::has_memory)
(inf_child_target::has_stack, inf_child_target::has_registers)
(inf_child_target::has_execution): New.
(inf_child_fileio_open, inf_child_fileio_pwrite)
(inf_child_fileio_pread, inf_child_fileio_fstat)
(inf_child_fileio_close, inf_child_fileio_unlink)
(inf_child_fileio_readlink, inf_child_use_agent)
(inf_child_can_use_agent): Refactor as methods of
inf_child_target.
(return_zero, inf_child_target): Delete.
(inf_child_target::inf_child_target): New.
* inf-child.h: Include "target.h".
(inf_child_target): Delete function prototype.
(inf_child_target): New class.
(inf_child_open_target, inf_child_mourn_inferior)
(inf_child_maybe_unpush_target): Delete.
* inf-ptrace.c (inf_ptrace_target::~inf_ptrace_target): New.
(inf_ptrace_follow_fork, inf_ptrace_insert_fork_catchpoint)
(inf_ptrace_remove_fork_catchpoint, inf_ptrace_create_inferior)
(inf_ptrace_post_startup_inferior, inf_ptrace_mourn_inferior)
(inf_ptrace_attach, inf_ptrace_post_attach, inf_ptrace_detach)
(inf_ptrace_detach_success, inf_ptrace_kill, inf_ptrace_resume)
(inf_ptrace_wait, inf_ptrace_xfer_partial)
(inf_ptrace_thread_alive, inf_ptrace_files_info)
(inf_ptrace_pid_to_str, inf_ptrace_auxv_parse): Refactor as
methods of inf_ptrace_target.
(inf_ptrace_target): Delete function.
* inf-ptrace.h: Include "inf-child.h".
(inf_ptrace_target): Delete function declaration.
(inf_ptrace_target): New class.
(inf_ptrace_trad_target, inf_ptrace_detach_success): Delete.
* linux-nat.c (linux_target): New.
(linux_ops, linux_ops_saved, super_xfer_partial): Delete.
(linux_nat_target::~linux_nat_target): New.
(linux_child_post_attach, linux_child_post_startup_inferior)
(linux_child_follow_fork, linux_child_insert_fork_catchpoint)
(linux_child_remove_fork_catchpoint)
(linux_child_insert_vfork_catchpoint)
(linux_child_remove_vfork_catchpoint)
(linux_child_insert_exec_catchpoint)
(linux_child_remove_exec_catchpoint)
(linux_child_set_syscall_catchpoint, linux_nat_pass_signals)
(linux_nat_create_inferior, linux_nat_attach, linux_nat_detach)
(linux_nat_resume, linux_nat_stopped_by_watchpoint)
(linux_nat_stopped_data_address)
(linux_nat_stopped_by_sw_breakpoint)
(linux_nat_supports_stopped_by_sw_breakpoint)
(linux_nat_stopped_by_hw_breakpoint)
(linux_nat_supports_stopped_by_hw_breakpoint, linux_nat_wait)
(linux_nat_kill, linux_nat_mourn_inferior)
(linux_nat_xfer_partial, linux_nat_thread_alive)
(linux_nat_update_thread_list, linux_nat_pid_to_str)
(linux_nat_thread_name, linux_child_pid_to_exec_file)
(linux_child_static_tracepoint_markers_by_strid)
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_supports_non_stop, linux_nat_always_non_stop_p)
(linux_nat_supports_multi_process)
(linux_nat_supports_disable_randomization, linux_nat_async)
(linux_nat_stop, linux_nat_close, linux_nat_thread_address_space)
(linux_nat_core_of_thread, linux_nat_filesystem_is_local)
(linux_nat_fileio_open, linux_nat_fileio_readlink)
(linux_nat_fileio_unlink, linux_nat_thread_events): Refactor as
methods of linux_nat_target.
(linux_nat_wait_1, linux_xfer_siginfo, linux_proc_xfer_partial)
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Remove target_ops
parameter.
(check_stopped_by_watchpoint): Adjust.
(linux_xfer_partial): Delete.
(linux_target_install_ops, linux_target, linux_nat_add_target):
Delete.
(linux_nat_target::linux_nat_target): New.
* linux-nat.h: Include "inf-ptrace.h".
(linux_nat_target): New.
(linux_target, linux_target_install_ops, linux_nat_add_target):
Delete function declarations.
(linux_target): Declare global.
* linux-thread-db.c (thread_db_target): New.
(thread_db_target::thread_db_target): New.
(thread_db_ops): Delete.
(the_thread_db_target): New.
(thread_db_detach, thread_db_wait, thread_db_mourn_inferior)
(thread_db_update_thread_list, thread_db_pid_to_str)
(thread_db_extra_thread_info)
(thread_db_thread_handle_to_thread_info)
(thread_db_get_thread_local_address, thread_db_get_ada_task_ptid)
(thread_db_resume): Refactor as methods of thread_db_target.
(init_thread_db_ops): Delete.
(_initialize_thread_db): Remove reference to init_thread_db_ops.
* x86-linux-nat.c: Don't include "linux-nat.h".
(super_post_startup_inferior): Delete.
(x86_linux_nat_target::~x86_linux_nat_target): New.
(x86_linux_child_post_startup_inferior)
(x86_linux_read_description, x86_linux_enable_btrace)
(x86_linux_disable_btrace, x86_linux_teardown_btrace)
(x86_linux_read_btrace, x86_linux_btrace_conf): Refactor as
methods of x86_linux_nat_target.
(x86_linux_create_target): Delete. Bits folded ...
(x86_linux_add_target): ... here. Now takes a linux_nat_target
pointer.
* x86-linux-nat.h: Include "linux-nat.h" and "x86-nat.h".
(x86_linux_nat_target): New class.
(x86_linux_create_target): Delete.
(x86_linux_add_target): Now takes a linux_nat_target pointer.
* x86-nat.c (x86_insert_watchpoint, x86_remove_watchpoint)
(x86_region_ok_for_watchpoint, x86_stopped_data_address)
(x86_stopped_by_watchpoint, x86_insert_hw_breakpoint)
(x86_remove_hw_breakpoint, x86_can_use_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): Remove target_ops parameter and
make extern.
(x86_use_watchpoints): Delete.
* x86-nat.h: Include "breakpoint.h" and "target.h".
(x86_use_watchpoints): Delete.
(x86_can_use_hw_breakpoint, x86_region_ok_for_hw_watchpoint)
(x86_stopped_by_watchpoint, x86_stopped_data_address)
(x86_insert_watchpoint, x86_remove_watchpoint)
(x86_insert_hw_breakpoint, x86_remove_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): New declarations.
(x86_nat_target): New template class.
* ppc-linux-nat.c (ppc_linux_nat_target): New class.
(the_ppc_linux_nat_target): New.
(ppc_linux_fetch_inferior_registers)
(ppc_linux_can_use_hw_breakpoint)
(ppc_linux_region_ok_for_hw_watchpoint)
(ppc_linux_ranged_break_num_registers)
(ppc_linux_insert_hw_breakpoint, ppc_linux_remove_hw_breakpoint)
(ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_can_accel_watchpoint_condition)
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint)
(ppc_linux_stopped_data_address, ppc_linux_stopped_by_watchpoint)
(ppc_linux_watchpoint_addr_within_range)
(ppc_linux_masked_watch_num_registers)
(ppc_linux_store_inferior_registers, ppc_linux_auxv_parse)
(ppc_linux_read_description): Refactor as methods of
ppc_linux_nat_target.
(_initialize_ppc_linux_nat): Adjust. Set linux_target.
* procfs.c (procfs_xfer_partial): Delete forward declaration.
(procfs_target): New class.
(the_procfs_target): New.
(procfs_target): Delete function.
(procfs_auxv_parse, procfs_attach, procfs_detach)
(procfs_fetch_registers, procfs_store_registers, procfs_wait)
(procfs_xfer_partial, procfs_resume, procfs_pass_signals)
(procfs_files_info, procfs_kill_inferior, procfs_mourn_inferior)
(procfs_create_inferior, procfs_update_thread_list)
(procfs_thread_alive, procfs_pid_to_str)
(procfs_can_use_hw_breakpoint, procfs_stopped_by_watchpoint)
(procfs_stopped_data_address, procfs_insert_watchpoint)
(procfs_remove_watchpoint, procfs_region_ok_for_hw_watchpoint)
(proc_find_memory_regions, procfs_info_proc)
(procfs_make_note_section): Refactor as methods of procfs_target.
(_initialize_procfs): Adjust.
* sol-thread.c (sol_thread_target): New class.
(sol_thread_ops): Now a sol_thread_target.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers)
(sol_thread_xfer_partial, sol_thread_mourn_inferior)
(sol_thread_alive, solaris_pid_to_str, sol_update_thread_list)
(sol_get_ada_task_ptid): Refactor as methods of sol_thread_target.
(init_sol_thread_ops): Delete.
(_initialize_sol_thread): Adjust. Remove references to
init_sol_thread_ops and complete_target_initialization.
* windows-nat.c (windows_nat_target): New class.
(windows_fetch_inferior_registers)
(windows_store_inferior_registers, windows_resume, windows_wait)
(windows_attach, windows_detach, windows_pid_to_exec_file)
(windows_files_info, windows_create_inferior)
(windows_mourn_inferior, windows_interrupt, windows_kill_inferior)
(windows_close, windows_pid_to_str, windows_xfer_partial)
(windows_get_tib_address, windows_get_ada_task_ptid)
(windows_thread_name, windows_thread_alive): Refactor as
windows_nat_target methods.
(do_initial_windows_stuff): Adjust.
(windows_target): Delete function.
(_initialize_windows_nat): Adjust.
* darwin-nat.c (darwin_resume, darwin_wait_to, darwin_interrupt)
(darwin_mourn_inferior, darwin_kill_inferior)
(darwin_create_inferior, darwin_attach, darwin_detach)
(darwin_pid_to_str, darwin_thread_alive, darwin_xfer_partial)
(darwin_pid_to_exec_file, darwin_get_ada_task_ptid)
(darwin_supports_multi_process): Refactor as darwin_nat_target
methods.
(darwin_resume_to, darwin_files_info): Delete.
(_initialize_darwin_inferior): Rename to ...
(_initialize_darwin_nat): ... this. Adjust to C++ification.
* darwin-nat.h: Include "inf-child.h".
(darwin_nat_target): New class.
(darwin_complete_target): Delete.
* i386-darwin-nat.c (i386_darwin_nat_target): New class.
(darwin_target): New.
(i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Refactor as methods of
darwin_nat_target.
(darwin_complete_target): Delete, with ...
(_initialize_i386_darwin_nat): ... bits factored out here.
* alpha-linux-nat.c (alpha_linux_nat_target): New class.
(the_alpha_linux_nat_target): New.
(alpha_linux_register_u_offset): Refactor as
alpha_linux_nat_target method.
(_initialize_alpha_linux_nat): Adjust.
* linux-nat-trad.c (inf_ptrace_register_u_offset): Delete.
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers): Refact as
methods of linux_nat_trad_target.
(linux_trad_target): Delete.
* linux-nat-trad.h (linux_trad_target): Delete function.
(linux_nat_trad_target): New class.
* mips-linux-nat.c (mips_linux_nat_target): New class.
(super_fetch_registers, super_store_registers, super_close):
Delete.
(the_mips_linux_nat_target): New.
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers)
(mips64_linux_fetch_registers, mips64_linux_store_registers)
(mips_linux_register_u_offset, mips_linux_read_description)
(mips_linux_can_use_hw_breakpoint)
(mips_linux_stopped_by_watchpoint)
(mips_linux_stopped_data_address)
(mips_linux_region_ok_for_hw_watchpoint)
(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
(mips_linux_close): Refactor as methods of mips_linux_nat.
(_initialize_mips_linux_nat): Adjust to C++ification.
* aix-thread.c (aix_thread_target): New class.
(aix_thread_ops): Now an aix_thread_target.
(aix_thread_detach, aix_thread_resume, aix_thread_wait)
(aix_thread_fetch_registers, aix_thread_store_registers)
(aix_thread_xfer_partial, aix_thread_mourn_inferior)
(aix_thread_thread_alive, aix_thread_pid_to_str)
(aix_thread_extra_thread_info, aix_thread_get_ada_task_ptid):
Refactor as methods of aix_thread_target.
(init_aix_thread_ops): Delete.
(_initialize_aix_thread): Remove references to init_aix_thread_ops
and complete_target_initialization.
* rs6000-nat.c (rs6000_xfer_shared_libraries): Delete.
(rs6000_nat_target): New class.
(the_rs6000_nat_target): New.
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers)
(rs6000_xfer_partial, rs6000_wait, rs6000_create_inferior)
(rs6000_xfer_shared_libraries): Refactor as rs6000_nat_target methods.
(super_create_inferior): Delete.
(_initialize_rs6000_nat): Adjust to C++ification.
* arm-linux-nat.c (arm_linux_nat_target): New class.
(the_arm_linux_nat_target): New.
(arm_linux_fetch_inferior_registers)
(arm_linux_store_inferior_registers, arm_linux_read_description)
(arm_linux_can_use_hw_breakpoint, arm_linux_insert_hw_breakpoint)
(arm_linux_remove_hw_breakpoint)
(arm_linux_region_ok_for_hw_watchpoint)
(arm_linux_insert_watchpoint, arm_linux_remove_watchpoint)
(arm_linux_stopped_data_address, arm_linux_stopped_by_watchpoint)
(arm_linux_watchpoint_addr_within_range): Refactor as methods of
arm_linux_nat_target.
(_initialize_arm_linux_nat): Adjust to C++ification.
* aarch64-linux-nat.c (aarch64_linux_nat_target): New class.
(the_aarch64_linux_nat_target): New.
(aarch64_linux_fetch_inferior_registers)
(aarch64_linux_store_inferior_registers)
(aarch64_linux_child_post_startup_inferior)
(aarch64_linux_read_description)
(aarch64_linux_can_use_hw_breakpoint)
(aarch64_linux_insert_hw_breakpoint)
(aarch64_linux_remove_hw_breakpoint)
(aarch64_linux_insert_watchpoint, aarch64_linux_remove_watchpoint)
(aarch64_linux_region_ok_for_hw_watchpoint)
(aarch64_linux_stopped_data_address)
(aarch64_linux_stopped_by_watchpoint)
(aarch64_linux_watchpoint_addr_within_range)
(aarch64_linux_can_do_single_step): Refactor as methods of
aarch64_linux_nat_target.
(super_post_startup_inferior): Delete.
(_initialize_aarch64_linux_nat): Adjust to C++ification.
* hppa-linux-nat.c (hppa_linux_nat_target): New class.
(the_hppa_linux_nat_target): New.
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Refactor as methods of
hppa_linux_nat_target.
(_initialize_hppa_linux_nat): Adjust to C++ification.
* ia64-linux-nat.c (ia64_linux_nat_target): New class.
(the_ia64_linux_nat_target): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
(ia64_linux_stopped_data_address)
(ia64_linux_stopped_by_watchpoint, ia64_linux_fetch_registers)
(ia64_linux_store_registers, ia64_linux_xfer_partial): Refactor as
ia64_linux_nat_target methods.
(super_xfer_partial): Delete.
(_initialize_ia64_linux_nat): Adjust to C++ification.
* m32r-linux-nat.c (m32r_linux_nat_target): New class.
(the_m32r_linux_nat_target): New.
(m32r_linux_fetch_inferior_registers)
(m32r_linux_store_inferior_registers): Refactor as
m32r_linux_nat_target methods.
(_initialize_m32r_linux_nat): Adjust to C++ification.
* m68k-linux-nat.c (m68k_linux_nat_target): New class.
(the_m68k_linux_nat_target): New.
(m68k_linux_fetch_inferior_registers)
(m68k_linux_store_inferior_registers): Refactor as
m68k_linux_nat_target methods.
(_initialize_m68k_linux_nat): Adjust to C++ification.
* s390-linux-nat.c (s390_linux_nat_target): New class.
(the_s390_linux_nat_target): New.
(s390_linux_fetch_inferior_registers)
(s390_linux_store_inferior_registers, s390_stopped_by_watchpoint)
(s390_insert_watchpoint, s390_remove_watchpoint)
(s390_can_use_hw_breakpoint, s390_insert_hw_breakpoint)
(s390_remove_hw_breakpoint, s390_region_ok_for_hw_watchpoint)
(s390_auxv_parse, s390_read_description): Refactor as methods of
s390_linux_nat_target.
(_initialize_s390_nat): Adjust to C++ification.
* sparc-linux-nat.c (sparc_linux_nat_target): New class.
(the_sparc_linux_nat_target): New.
(_initialize_sparc_linux_nat): Adjust to C++ification.
* sparc-nat.c (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc64-linux-nat.c (sparc64_linux_nat_target): New class.
(the_sparc64_linux_nat_target): New.
(_initialize_sparc64_linux_nat): Adjust to C++ification.
* spu-linux-nat.c (spu_linux_nat_target): New class.
(the_spu_linux_nat_target): New.
(spu_child_post_startup_inferior, spu_child_post_attach)
(spu_child_wait, spu_fetch_inferior_registers)
(spu_store_inferior_registers, spu_xfer_partial)
(spu_can_use_hw_breakpoint): Refactor as spu_linux_nat_target
methods.
(_initialize_spu_nat): Adjust to C++ification.
* tilegx-linux-nat.c (tilegx_linux_nat_target): New class.
(the_tilegx_linux_nat_target): New.
(fetch_inferior_registers, store_inferior_registers):
Refactor as methods.
(_initialize_tile_linux_nat): Adjust to C++ification.
* xtensa-linux-nat.c (xtensa_linux_nat_target): New class.
(the_xtensa_linux_nat_target): New.
(xtensa_linux_fetch_inferior_registers)
(xtensa_linux_store_inferior_registers): Refactor as
xtensa_linux_nat_target methods.
(_initialize_xtensa_linux_nat): Adjust to C++ification.
* fbsd-nat.c (USE_SIGTRAP_SIGINFO): Delete.
(fbsd_pid_to_exec_file, fbsd_find_memory_regions)
(fbsd_find_memory_regions, fbsd_info_proc, fbsd_xfer_partial)
(fbsd_thread_alive, fbsd_pid_to_str, fbsd_thread_name)
(fbsd_update_thread_list, fbsd_resume, fbsd_wait)
(fbsd_stopped_by_sw_breakpoint)
(fbsd_supports_stopped_by_sw_breakpoint, fbsd_follow_fork)
(fbsd_insert_fork_catchpoint, fbsd_remove_fork_catchpoint)
(fbsd_insert_vfork_catchpoint, fbsd_remove_vfork_catchpoint)
(fbsd_post_startup_inferior, fbsd_post_attach)
(fbsd_insert_exec_catchpoint, fbsd_remove_exec_catchpoint)
(fbsd_set_syscall_catchpoint)
(super_xfer_partial, super_resume, super_wait)
(fbsd_supports_stopped_by_hw_breakpoint): Delete.
(fbsd_handle_debug_trap): Remove target_ops parameter.
(fbsd_nat_add_target): Delete.
* fbsd-nat.h: Include "inf-ptrace.h".
(fbsd_nat_add_target): Delete.
(USE_SIGTRAP_SIGINFO): Define.
(fbsd_nat_target): New class.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Remove target_ops parameter.
(amd64bsd_target): Delete.
* amd64-bsd-nat.h: New file.
* amd64-fbsd-nat.c: Include "amd64-bsd-nat.h" instead of
"x86-bsd-nat.h".
(amd64_fbsd_nat_target): New class.
(the_amd64_fbsd_nat_target): New.
(amd64fbsd_read_description): Refactor as method of
amd64_fbsd_nat_target.
(amd64_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_amd64fbsd_nat): Adjust to C++ification.
* amd64-nat.h (amd64bsd_target): Delete function declaration.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Remove target_ops parameter.
(i386bsd_target): Delete.
* i386-bsd-nat.h (i386bsd_target): Delete function declaration.
(i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Declare.
(i386_bsd_nat_target): New class.
* i386-fbsd-nat.c (i386_fbsd_nat_target): New class.
(the_i386_fbsd_nat_target): New.
(i386fbsd_resume, i386fbsd_read_description): Refactor as
i386_fbsd_nat_target methods.
(i386_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_i386fbsd_nat): Adjust to C++ification.
* x86-bsd-nat.c (super_mourn_inferior): Delete.
(x86bsd_mourn_inferior, x86bsd_target): Delete.
(_initialize_x86_bsd_nat): Adjust to C++ification.
* x86-bsd-nat.h: Include "x86-nat.h".
(x86bsd_target): Delete declaration.
(x86bsd_nat_target): New class.
* aarch64-fbsd-nat.c (aarch64_fbsd_nat_target): New class.
(the_aarch64_fbsd_nat_target): New.
(aarch64_fbsd_fetch_inferior_registers)
(aarch64_fbsd_store_inferior_registers): Refactor as methods of
aarch64_fbsd_nat_target.
(_initialize_aarch64_fbsd_nat): Adjust to C++ification.
* alpha-bsd-nat.c (alpha_bsd_nat_target): New class.
(the_alpha_bsd_nat_target): New.
(alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Refactor as
alpha_bsd_nat_target methods.
(_initialize_alphabsd_nat): Refactor as methods of
alpha_bsd_nat_target.
* amd64-nbsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_nbsd_nat_target): New.
(_initialize_amd64nbsd_nat): Adjust to C++ification.
* amd64-obsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_obsd_nat_target): New.
(_initialize_amd64obsd_nat): Adjust to C++ification.
* arm-fbsd-nat.c (arm_fbsd_nat_target): New.
(the_arm_fbsd_nat_target): New.
(arm_fbsd_fetch_inferior_registers)
(arm_fbsd_store_inferior_registers, arm_fbsd_read_description):
(_initialize_arm_fbsd_nat): Refactor as methods of
arm_fbsd_nat_target.
(_initialize_arm_fbsd_nat): Adjust to C++ification.
* arm-nbsd-nat.c (arm_netbsd_nat_target): New class.
(the_arm_netbsd_nat_target): New.
(armnbsd_fetch_registers, armnbsd_store_registers): Refactor as
arm_netbsd_nat_target.
(_initialize_arm_netbsd_nat): Adjust to C++ification.
* hppa-nbsd-nat.c (hppa_nbsd_nat_target): New class.
(the_hppa_nbsd_nat_target): New.
(hppanbsd_fetch_registers, hppanbsd_store_registers): Refactor as
hppa_nbsd_nat_target methods.
(_initialize_hppanbsd_nat): Adjust to C++ification.
* hppa-obsd-nat.c (hppa_obsd_nat_target): New class.
(the_hppa_obsd_nat_target): New.
(hppaobsd_fetch_registers, hppaobsd_store_registers): Refactor as
methods of hppa_obsd_nat_target.
(_initialize_hppaobsd_nat): Adjust to C++ification. Use
add_target.
* i386-nbsd-nat.c (the_i386_nbsd_nat_target): New.
(_initialize_i386nbsd_nat): Adjust to C++ification. Use
add_target.
* i386-obsd-nat.c (the_i386_obsd_nat_target): New.
(_initialize_i386obsd_nat): Use add_target.
* m68k-bsd-nat.c (m68k_bsd_nat_target): New class.
(the_m68k_bsd_nat_target): New.
(m68kbsd_fetch_inferior_registers)
(m68kbsd_store_inferior_registers): Refactor as methods of
m68k_bsd_nat_target.
(_initialize_m68kbsd_nat): Adjust to C++ification.
* mips-fbsd-nat.c (mips_fbsd_nat_target): New class.
(the_mips_fbsd_nat_target): New.
(mips_fbsd_fetch_inferior_registers)
(mips_fbsd_store_inferior_registers): Refactor as methods of
mips_fbsd_nat_target.
(_initialize_mips_fbsd_nat): Adjust to C++ification. Use
add_target.
* mips-nbsd-nat.c (mips_nbsd_nat_target): New class.
(the_mips_nbsd_nat_target): New.
(mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Refactor as methods of
mips_nbsd_nat_target.
(_initialize_mipsnbsd_nat): Adjust to C++ification.
* mips64-obsd-nat.c (mips64_obsd_nat_target): New class.
(the_mips64_obsd_nat_target): New.
(mips64obsd_fetch_inferior_registers)
(mips64obsd_store_inferior_registers): Refactor as methods of
mips64_obsd_nat_target.
(_initialize_mips64obsd_nat): Adjust to C++ification. Use
add_target.
* nbsd-nat.c (nbsd_pid_to_exec_file): Refactor as method of
nbsd_nat_target.
* nbsd-nat.h: Include "inf-ptrace.h".
(nbsd_nat_target): New class.
* obsd-nat.c (obsd_pid_to_str, obsd_update_thread_list)
(obsd_wait): Refactor as methods of obsd_nat_target.
(obsd_add_target): Delete.
* obsd-nat.h: Include "inf-ptrace.h".
(obsd_nat_target): New class.
* ppc-fbsd-nat.c (ppc_fbsd_nat_target): New class.
(the_ppc_fbsd_nat_target): New.
(ppcfbsd_fetch_inferior_registers)
(ppcfbsd_store_inferior_registers): Refactor as methods of
ppc_fbsd_nat_target.
(_initialize_ppcfbsd_nat): Adjust to C++ification. Use
add_target.
* ppc-nbsd-nat.c (ppc_nbsd_nat_target): New class.
(the_ppc_nbsd_nat_target): New.
(ppcnbsd_fetch_inferior_registers)
(ppcnbsd_store_inferior_registers): Refactor as methods of
ppc_nbsd_nat_target.
(_initialize_ppcnbsd_nat): Adjust to C++ification.
* ppc-obsd-nat.c (ppc_obsd_nat_target): New class.
(the_ppc_obsd_nat_target): New.
(ppcobsd_fetch_registers, ppcobsd_store_registers): Refactor as
methods of ppc_obsd_nat_target.
(_initialize_ppcobsd_nat): Adjust to C++ification. Use
add_target.
* sh-nbsd-nat.c (sh_nbsd_nat_target): New class.
(the_sh_nbsd_nat_target): New.
(shnbsd_fetch_inferior_registers)
(shnbsd_store_inferior_registers): Refactor as methods of
sh_nbsd_nat_target.
(_initialize_shnbsd_nat): Adjust to C++ification.
* sparc-nat.c (sparc_xfer_wcookie): Make extern.
(inf_ptrace_xfer_partial): Delete.
(sparc_xfer_partial, sparc_target): Delete.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers, sparc_xfer_wcookie): Declare.
(sparc_target): Delete function declaration.
(sparc_target): New template class.
* sparc-nbsd-nat.c (the_sparc_nbsd_nat_target): New.
(_initialize_sparcnbsd_nat): Adjust to C++ification.
* sparc64-fbsd-nat.c (the_sparc64_fbsd_nat_target): New.
(_initialize_sparc64fbsd_nat): Adjust to C++ification. Use
add_target.
* sparc64-nbsd-nat.c (the_sparc64_nbsd_nat_target): New.
(_initialize_sparc64nbsd_nat): Adjust to C++ification.
* sparc64-obsd-nat.c (the_sparc64_obsd_nat_target): New.
(_initialize_sparc64obsd_nat): Adjust to C++ification. Use
add_target.
* vax-bsd-nat.c (vax_bsd_nat_target): New class.
(the_vax_bsd_nat_target): New.
(vaxbsd_fetch_inferior_registers)
(vaxbsd_store_inferior_registers): Refactor as vax_bsd_nat_target
methods.
(_initialize_vaxbsd_nat): Adjust to C++ification.
* bsd-kvm.c (bsd_kvm_target): New class.
(bsd_kvm_ops): Now a bsd_kvm_target.
(bsd_kvm_open, bsd_kvm_close, bsd_kvm_xfer_partial)
(bsd_kvm_files_info, bsd_kvm_fetch_registers)
(bsd_kvm_thread_alive, bsd_kvm_pid_to_str): Refactor as methods of
bsd_kvm_target.
(bsd_kvm_return_one): Delete.
(bsd_kvm_add_target): Adjust to C++ification.
* nto-procfs.c (nto_procfs_target, nto_procfs_target_native)
(nto_procfs_target_procfs): New classes.
(procfs_open_1, procfs_thread_alive, procfs_update_thread_list)
(procfs_files_info, procfs_pid_to_exec_file, procfs_attach)
(procfs_post_attach, procfs_wait, procfs_fetch_registers)
(procfs_xfer_partial, procfs_detach, procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint, procfs_resume)
(procfs_mourn_inferior, procfs_create_inferior, procfs_interrupt)
(procfs_kill_inferior, procfs_store_registers)
(procfs_pass_signals, procfs_pid_to_str, procfs_can_run): Refactor
as methods of nto_procfs_target.
(nto_procfs_ops): Now an nto_procfs_target_procfs.
(nto_native_ops): Delete.
(procfs_open, procfs_native_open): Delete.
(nto_native_ops): Now an nto_procfs_target_native.
(init_procfs_targets): Adjust to C++ification.
(procfs_can_use_hw_breakpoint, procfs_remove_hw_watchpoint)
(procfs_insert_hw_watchpoint, procfs_stopped_by_watchpoint):
Refactor as methods of nto_procfs_target.
* go32-nat.c (go32_nat_target): New class.
(the_go32_nat_target): New.
(go32_attach, go32_resume, go32_wait, go32_fetch_registers)
(go32_store_registers, go32_xfer_partial, go32_files_info)
(go32_kill_inferior, go32_create_inferior, go32_mourn_inferior)
(go32_terminal_init, go32_terminal_info, go32_terminal_inferior)
(go32_terminal_ours, go32_pass_ctrlc, go32_thread_alive)
(go32_pid_to_str): Refactor as methods of go32_nat_target.
(go32_target): Delete.
(_initialize_go32_nat): Adjust to C++ification.
* gnu-nat.c (gnu_wait, gnu_resume, gnu_kill_inferior)
(gnu_mourn_inferior, gnu_create_inferior, gnu_attach, gnu_detach)
(gnu_stop, gnu_thread_alive, gnu_xfer_partial)
(gnu_find_memory_regions, gnu_pid_to_str): Refactor as methods of
gnu_nat_target.
(gnu_target): Delete.
* gnu-nat.h (gnu_target): Delete.
(gnu_nat_target): New class.
* i386-gnu-nat.c (gnu_base_target): New.
(i386_gnu_nat_target): New class.
(the_i386_gnu_nat_target): New.
(_initialize_i386gnu_nat): Adjust to C++ification.
gdb/testsuite/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.exp: Adjust to to_resume and
to_log_command renames.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
|
|
This removes a use of is_mi_like_p and changes a printf_filtered into
a call to ui_out::text.
ChangeLog
2018-04-30 Tom Tromey <tom@tromey.com>
* tracepoint.c (tvariables_info_1): Remove use of is_mi_like_p.
|
|
This patch removes VEC(tsv_s), using an std::vector instead. I C++ified
trace_state_variable a bit in the process, using std::string for the
name. I also thought it would be nicer to pass a const reference to
target_download_trace_state_variable, since we know it will never be
NULL. This highlighted that the make-target-delegates script didn't
handle references well, so I adjusted this as well. It will surely be
useful in the future.
gdb/ChangeLog:
* tracepoint.h (struct trace_state_variable): Add constructor.
<name>: Change type to std::string.
* tracepoint.c (tsv_s): Remove.
(DEF_VEC_O(tsv_s)): Remove.
(tvariables): Change to std::vector.
(create_trace_state_variable): Adjust to std::vector.
(find_trace_state_variable): Likewise.
(find_trace_state_variable_by_number): Likewise.
(delete_trace_state_variable): Likewise.
(trace_variable_command): Adjust to std::string.
(delete_trace_variable_command): Likewise.
(tvariables_info_1): Adjust to std::vector.
(save_trace_state_variables): Likewise.
(start_tracing): Likewise.
(merge_uploaded_trace_state_variables): Adjust to std::vector
and std::string.
* target.h (struct target_ops)
<to_download_trace_state_variable>: Pass reference to
trace_state_variable.
* target-debug.h (target_debug_print_const_trace_state_variable_r): New.
* target-delegates.c: Re-generate.
* mi/mi-interp.c (mi_tsv_created): Adjust to std::string.
(mi_tsv_deleted): Likewise.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
* remote.c (remote_download_trace_state_variable): Change
pointer to reference and adjust.
* make-target-delegates (parse_argtypes): Handle references.
(write_function_header): Likewise.
(munge_type): Likewise.
|
|
I put the constructor in tracepoint.c because it needs to read
traceframe_number, and I prefer to do that than to expose
traceframe_number.
gdb/ChangeLog:
* tracepoint.c (struct current_traceframe_cleanup): Remove.
(do_restore_current_traceframe_cleanup): Remove.
(restore_current_traceframe_cleanup_dtor): Remove.
(make_cleanup_restore_current_traceframe): Remove.
(scoped_restore_current_traceframe::scoped_restore_current_traceframe):
New.
* tracepoint.h (struct scoped_restore_current_traceframe): New.
* infrun.c (fetch_inferior_event): Use
scoped_restore_current_traceframe.
|
|
This patch started by changing target_read_alloc_1 to return a
byte_vector, to avoid manual memory management (in target_read_alloc_1
and in the callers). To communicate failures to the callers, it
actually returns a gdb::optional<gdb::byte_vector>.
Adjusting target_read_stralloc was a bit more tricky, since it wants to
return a buffer of char, and not gdb_byte. Since you can't just cast a
gdb::byte_vector into a gdb::def_vector<char>, I made
target_read_alloc_1 templated, so both versions (that return vectors of
gdb_byte and char) are generated. Since target_read_stralloc now
returns a gdb::char_vector instead of a gdb::unique_xmalloc_ptr<char>, a
few callers need to be adjusted.
gdb/ChangeLog:
* common/byte-vector.h (char_vector): New type.
* target.h (target_read_alloc): Return
gdb::optional<byte_vector>.
(target_read_stralloc): Return gdb::optional<char_vector>.
(target_get_osdata): Return gdb::optional<char_vector>.
* target.c (target_read_alloc_1): Templatize. Replacement
manual memory management with vector.
(target_read_alloc): Change return type, adjust.
(target_read_stralloc): Change return type, adjust.
(target_get_osdata): Change return type, adjust.
* auxv.c (struct auxv_info) <length>: Remove.
<data>: Change type to gdb::optional<byte_vector>.
(auxv_inferior_data_cleanup): Free auxv_info with delete.
(get_auxv_inferior_data): Allocate auxv_info with new, adjust.
(target_auxv_search): Adjust.
(fprint_target_auxv): Adjust.
* avr-tdep.c (avr_io_reg_read_command): Adjust.
* linux-tdep.c (linux_spu_make_corefile_notes): Adjust.
(linux_make_corefile_notes): Adjust.
* osdata.c (get_osdata): Adjust.
* remote.c (remote_get_threads_with_qxfer): Adjust.
(remote_memory_map): Adjust.
(remote_traceframe_info): Adjust.
(btrace_read_config): Adjust.
(remote_read_btrace): Adjust.
(remote_pid_to_exec_file): Adjust.
* solib-aix.c (solib_aix_get_library_list): Adjust.
* solib-dsbt.c (decode_loadmap): Don't free buf.
(dsbt_get_initial_loadmaps): Adjust.
* solib-svr4.c (svr4_current_sos_via_xfer_libraries): Adjust.
* solib-target.c (solib_target_current_sos): Adjust.
* tracepoint.c (sdata_make_value): Adjust.
* xml-support.c (xinclude_start_include): Adjust.
(xml_fetch_content_from_file): Adjust.
* xml-support.h (xml_fetch_another): Change return type.
(xml_fetch_content_from_file): Change return type.
* xml-syscall.c (xml_init_syscalls_info): Adjust.
* xml-tdesc.c (file_read_description_xml): Adjust.
(fetch_available_features_from_target): Change return type.
(target_fetch_description_xml): Adjust.
(target_read_description_xml): Adjust.
|
|
Now that all instances of VEC(char_ptr) are gone, we can remove the
typedef. There is just one usage left, that is trivial to replace.
Tested by rebuilding on an enable-targets=all build.
gdb/ChangeLog:
* common/gdb_vecs.h (char_ptr): Remove.
* tracepoint.c (encode_actions_1): Remove usage of char_ptr.
|
|
This patch changes the VEC(char_ptr) fields in uploaded_tp to use
std::vector<char *>. At first, I wanted to creep in more changes, like
using std::string, but it was making the patch too big and less focused,
so I decided to keep it to just that.
It also looks like the strings in those vectors are never free'd. If
so, we can fix that in another patch.
gdb/ChangeLog:
* tracepoint.h (struct uploaded_tp): Initialize fields.
<actions, step_actions, cmd_strings>: Change type to
std::vector<char *>.
* tracepoint.c (get_uploaded_tp): Allocate with new.
(free_uploaded_tps): Free with delete.
(parse_tracepoint_definition): Adjust to std::vector change.
* breakpoint.c (read_uploaded_action): Likewise.
(create_tracepoint_from_upload): Likewise.
* ctf.c (ctf_write_uploaded_tp): Likewise.
(SET_ARRAY_FIELD): Likewise.
* tracefile-tfile.c (tfile_write_uploaded_tp): Likewise.
|
|
This patch replaces VEC(static_tracepoint_marker_p) with std::vector,
and does some c++ification around that. I thought a new overload of
hex2str was useful, so I added it as well as corresponding unit tests.
I also added an overload of ui_out::field_string that takes an
std::string directly.
gdb/ChangeLog:
* tracepoint.h (struct static_tracepoint_marker): Initialize
fields, define default constructor, move constructor and move
assignment, disable the rest.
<str_id, extra>: Make std::string.
(release_static_tracepoint_marker): Remove.
(free_current_marker): Remove.
* tracepoint.c (free_current_marker): Remove.
(parse_static_tracepoint_marker_definition): Adjust to
std::string, use new hex2str overload.
(release_static_tracepoint_marker): Remove.
(print_one_static_tracepoint_marker): Get marker by reference
and adjust to std::string.
(info_static_tracepoint_markers_command): Adjust to std::vector
changes
* target.h (static_tracepoint_marker_p): Remove typedef.
(DEF_VEC_P(static_tracepoint_marker_p)): Remove.
(struct target_ops) <to_static_tracepoint_marker_at>: Return
bool.
<to_static_tracepoint_markers_by_strid>: Return std::vector.
* target-debug.h
(target_debug_print_VEC_static_tracepoint_marker_p_p): Remove.
(target_debug_print_std_vector_static_tracepoint_marker): New.
(target_debug_print_struct_static_tracepoint_marker_p): Rename
to...
(target_debug_print_static_tracepoint_marker_p): ... this.
* target-delegates.c: Re-generate.
* breakpoint.h (struct tracepoint) <static_trace_marker_id>:
Make std::string.
* breakpoint.c (init_breakpoint_sal): Adjust to std::string.
(decode_static_tracepoint_spec): Adjust to std::vector.
(tracepoint_print_one_detail): Adjust to std::string.
(strace_marker_decode_location): Adjust to std::string.
(update_static_tracepoint): Adjust to std::string, remove call
to release_static_tracepoint_marker.
* linux-nat.c (linux_child_static_tracepoint_markers_by_strid):
Adjust to std::vector.
* remote.c (remote_static_tracepoint_marker_at): Return bool.
(remote_static_tracepoint_markers_by_strid): Adjust to
std::vector.
* common/rsp-low.h (hex2str): New overload with explicit count
of bytes.
* common/rsp-low.c (hex2str): New overload with explicit count
of bytes.
* unittests/rsp-low-selftests.c (test_hex2str): New function.
(_initialize_rsp_low_selftests): Add test_hex2str test.
* unittests/tracepoint-selftests.c
(test_parse_static_tracepoint_marker_definition): Adjust to
std::string.
|
|
tracepoint definitions
Since I modify the parse_static_tracepoint_marker_definition function in
the next patch, I wanted to write a unit test for it. Doing so showed
that it doesn't handle multiple consecutive static tracepoint
definitions separated by commas. However, the RSP documentation [1]
states that servers may return multiple definitions, like:
1234:6d61726b657231:6578747261207374756666,abba:6d61726b657232:
The problem is that the function uses strlen to compute the length of
the last field (the extra field). If there are additional definitions
in addition to the one we are currently parsing, the returned length
will include those definitions, and we'll try to hex-decode past the
extra field.
This patch changes parse_static_tracepoint_marker_definition to consider
the case where the current definition is followed by a comma and more
definitions. It also adds the unit test that found the issue in the
first place.
I don't think this causes any backwards compatibility issues, because
the previous code only handled single static tracepoint definitions, and
the new code handles that correctly.
gdb/ChangeLog:
* tracepoint.c (parse_static_tracepoint_marker_definition):
Consider case where the definition is followed by more
definitions.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
tracepoint-selftests.c.
* unittests/tracepoint-selftests.c: New.
[1] https://sourceware.org/gdb/onlinedocs/gdb/Tracepoint-Packets.html#qTfSTM
|
|
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
|
|
This patch replaces VEC(gdb_xml_value_s), which is passed to XML
visitors, with an std::vector. In order to be able to remove the
cleanup in gdb_xml_parser::start_element, the gdb_xml_parser structure
is made to own the value with a gdb::unique_xmalloc_ptr.
This patch has been tested on the buildbot.
gdb/ChangeLog:
* xml-support.h (struct gdb_xml_value): Add constructor.
<value>: Change type to unique_xmalloc_ptr.
(gdb_xml_value_s): Remove typedef.
(DEF_VEC_O (gdb_xml_value_s)): Remove.
(gdb_xml_element_start_handler): Change parameter type to
std::vector.
(xml_find_attribute): Likewise.
* xml-support.c (xml_find_attribute): Change parameter type to
std::vector and adjust.
(gdb_xml_values_cleanup): Remove.
(gdb_xml_parser::start_element): Adjust to std::vector.
(xinclude_start_include): Change paraeter type to std::vector
and adjust.
* btrace.c (check_xml_btrace_version): Likewise.
(parse_xml_btrace_block): Likewise.
(parse_xml_btrace_pt_config_cpu): Likewise.
(parse_xml_btrace_pt): Likewise.
(parse_xml_btrace_conf_bts): Likewise.
(parse_xml_btrace_conf_pt): Likewise.
* memory-map.c (memory_map_start_memory): Likewise.
(memory_map_start_property): Likewise.
* osdata.c (osdata_start_osdata): Likewise.
(osdata_start_item): Likewise.
(osdata_start_column): Likewise.
* remote.c (start_thread): Likewise.
* solib-aix.c (library_list_start_library): Likewise.
(library_list_start_list): Likewise.
* solib-svr4.c (library_list_start_library): Likewise.
(svr4_library_list_start_list): Likewise.
* solib-target.c (library_list_start_segment): Likewise.
(library_list_start_section): Likewise.
(library_list_start_library): Likewise.
(library_list_start_list): Likewise.
* tracepoint.c (traceframe_info_start_memory): Likewise.
(traceframe_info_start_tvar): Likewise.
* xml-syscall.c (syscall_start_syscall): Likewise.
* xml-tdesc.c (tdesc_start_target): Likewise.
(tdesc_start_feature): Likewise.
(tdesc_start_reg): Likewise.
(tdesc_start_union): Likewise.
(tdesc_start_struct): Likewise.
(tdesc_start_flags): Likewise.
(tdesc_start_enum): Likewise.
(tdesc_start_field): Likewise.
(tdesc_start_enum_value): Likewise.
(tdesc_start_vector): Likewise.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
This patch removes some unused variables, found with -Wunused. I have
not removed everything reported by -Wunused, because some expressions
such as
struct type *arg_type = check_typedef (value_type);
in bfin-tdep.c could have an unexpected but important side-effect. I
removed others that I considered more low-risk, such as:
struct gdbarch *gdbarch = get_objfile_arch (objfile);
I tested building with Python 2/Python 3/no Python, with/without expat,
with/without libipt and with/without babeltrace.
gdb/ChangeLog:
* ada-lang.c (ada_collect_symbol_completion_matches): Remove
unused variables.
(ada_is_redundant_range_encoding): Likewise.
* ada-varobj.c (ada_varobj_get_value_of_array_variable):
Likewise.
* alpha-tdep.c (alpha_software_single_step): Likewise.
* arm-tdep.c (_initialize_arm_tdep): Likewise.
* auto-load.c (info_auto_load_cmd): Likewise.
* break-catch-syscall.c (insert_catch_syscall): Likewise.
(remove_catch_syscall): Likewise.
* breakpoint.c (condition_completer): Likewise.
(clear_command): Likewise.
(update_breakpoint_locations): Likewise.
* btrace.c (btrace_disable): Likewise.
(btrace_teardown): Likewise.
(btrace_maint_update_pt_packets): Likewise.
(maint_btrace_clear_cmd): Likewise.
* cli/cli-decode.c (lookup_cmd_1): Likewise.
(lookup_cmd_composition): Likewise.
* cli/cli-dump.c (scan_filename): Likewise.
(restore_command): Likewise.
* compile/compile-loc2c.c (compute_stack_depth): Likewise.
* compile/compile-object-load.c (compile_object_load): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* compile/compile.c (compile_to_object): Likewise.
* completer.c (filename_completer): Likewise.
(complete_files_symbols): Likewise.
(complete_expression): Likewise.
* corelow.c (core_open): Likewise.
* ctf.c (ctf_start): Likewise.
(ctf_write_status): Likewise.
(ctf_write_uploaded_tsv): Likewise.
(ctf_write_definition_end): Likewise.
(ctf_open_dir): Likewise.
(ctf_xfer_partial): Likewise.
(ctf_trace_find): Likewise.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Likewise.
* dwarf2loc.c (allocate_piece_closure): Likewise.
(indirect_pieced_value): Likewise.
(dwarf2_evaluate_loc_desc_full): Likewise.
* dwarf2read.c (dw2_expand_marked_cus): Likewise.
(dw2_expand_symtabs_matching): Likewise.
(dw2_map_symbol_filenames): Likewise.
(read_and_check_comp_unit_head): Likewise.
(read_cutu_die_from_dwo): Likewise.
(lookup_dwo_unit): Likewise.
(read_comp_units_from_section): Likewise.
(dwarf2_compute_name): Likewise.
(handle_DW_AT_stmt_list): Likewise.
(create_cus_hash_table): Likewise.
(create_dwp_v2_section): Likewise.
(dwarf2_rnglists_process): Likewise.
(dwarf2_ranges_process): Likewise.
(dwarf2_record_block_ranges): Likewise.
(is_vtable_name): Likewise.
(read_formatted_entries): Likewise.
(skip_form_bytes): Likewise.
* elfread.c (elf_symtab_read): Likewise.
* exec.c (exec_file_command): Likewise.
* f-valprint.c (f_val_print): Likewise.
(info_common_command_for_block): Likewise.
* guile/guile.c (initialize_scheme_side): Likewise.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise.
* guile/scm-cmd.c (cmdscm_completer): Likewise.
(gdbscm_register_command_x): Likewise.
* guile/scm-frame.c (gdbscm_frame_read_var): Likewise.
* guile/scm-param.c (gdbscm_parameter_value): Likewise.
* guile/scm-ports.c (file_port_magic): Likewise.
* guile/scm-pretty-print.c (ppscm_search_pp_list): Likewise.
(ppscm_pretty_print_one_value): Likewise.
(ppscm_print_children): Likewise.
* guile/scm-string.c (gdbscm_string_to_argv): Likewise.
* guile/scm-symtab.c (gdbscm_sal_symtab): Likewise.
* guile/scm-type.c (gdbscm_type_next_field_x): Likewise.
* guile/scm-utils.c (gdbscm_parse_function_args): Likewise.
* i386-tdep.c (i386_register_reggroup_p): Likewise.
* infcmd.c (run_command_1): Likewise.
(until_next_fsm_clean_up): Likewise.
* linespec.c (linespec_complete): Likewise.
(find_label_symbols): Likewise.
* m2-valprint.c (m2_val_print): Likewise.
* memattr.c (require_user_regions): Likewise.
(lookup_mem_region): Likewise.
(disable_mem_command): Likewise.
(mem_delete): Likewise.
* mep-tdep.c (mep_register_name): Likewise.
(mep_analyze_prologue): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Likewise.
* mi/mi-interp.c (mi_on_sync_execution_done): Likewise.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
* microblaze-linux-tdep.c (microblaze_linux_init_abi): Likewise.
* minidebug.c (lzma_open): Likewise.
* minsyms.c (lookup_minimal_symbol): Likewise.
* mips-linux-tdep.c (mips64_fill_fpregset): Likewise.
* mips-tdep.c (mips_stub_frame_sniffer): Likewise.
(mips_o64_return_value): Likewise.
(mips_single_step_through_delay): Likewise.
(_initialize_mips_tdep): Likewise.
* nios2-tdep.c (nios2_push_dummy_call): Likewise.
(nios2_software_single_step): Likewise.
* parse.c (find_minsym_type_and_address): Likewise.
* psymtab.c (psym_relocate): Likewise.
* python/py-breakpoint.c (bppy_get_commands): Likewise.
(gdbpy_breakpoint_modified): Likewise.
* python/py-infevents.c (create_inferior_call_event_object):
Likewise.
* python/py-record-btrace.c (btpy_list_item): Likewise.
* python/py-type.c (typy_str): Likewise.
* python/py-value.c (valpy_call): Likewise.
* python/python.c (do_start_initialization): Likewise.
* record-btrace.c (record_btrace_insn_history_range): Likewise.
(record_btrace_call_history_range): Likewise.
(record_btrace_record_method): Likewise.
(record_btrace_xfer_partial): Likewise.
(btrace_get_frame_function): Likewise.
* record-full.c (record_full_open): Likewise.
* record.c (get_context_size): Likewise.
* registry.h (DEFINE_REGISTRY): Likewise.
* remote-fileio.c (remote_fileio_request): Likewise.
* remote.c (remote_update_thread_list): Likewise.
(remote_check_symbols): Likewise.
(remote_commit_resume): Likewise.
(remote_interrupt): Likewise.
(remote_insert_breakpoint): Likewise.
(compare_sections_command): Likewise.
* rust-exp.y (super_name): Likewise.
(lex_string): Likewise.
(convert_ast_to_type): Likewise.
(convert_ast_to_expression): Likewise.
* rust-lang.c (rust_print_struct_def): Likewise.
(rust_print_type): Likewise.
(rust_evaluate_subexp): Likewise.
* rx-tdep.c (rx_register_type): Likewise.
* ser-event.c (serial_event_clear): Likewise.
* serial.c (serial_open): Likewise.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
* symfile.c (section_is_overlay): Likewise.
(overlay_unmapped_address): Likewise.
(overlay_mapped_address): Likewise.
(simple_overlay_update_1): Likewise.
(simple_overlay_update): Likewise.
* symtab.c (symbol_find_demangled_name): Likewise.
(search_symbols): Likewise.
* target-descriptions.c (tdesc_predefined_type): Likewise.
* target.c (target_commit_resume): Likewise.
* thread.c (print_selected_thread_frame): Likewise.
* top.c (new_ui_command): Likewise.
(gdb_readline_no_editing): Likewise.
* tracefile-tfile.c (tfile_open): Likewise.
* tracepoint.c (create_tsv_from_upload): Likewise.
* utils.c (quit): Likewise.
(defaulted_query): Likewise.
* valarith.c (value_concat): Likewise.
* xml-syscall.c (xml_list_syscalls_by_group): Likewise.
* xml-tdesc.c (target_fetch_description_xml): Likewise.
* xtensa-tdep.c (xtensa_pseudo_register_read): Likewise.
(xtensa_pseudo_register_write): Likewise.
gdb/gdbserver/ChangeLog:
* regcache.c (registers_to_string): Remove unused variable.
|
|
This patch converts the generic probe interface (gdb/probe.[ch]) to
C++, and also performs some cleanups that were on my TODO list for a
while.
The main changes were the conversion of 'struct probe' to 'class
probe', and 'struct probe_ops' to 'class static_probe_ops'. The
former now contains all the "dynamic", generic methods that act on a
probe + the generic data related to it; the latter encapsulates a
bunch of "static" methods that relate to the probe type, but not to a
specific probe itself.
I've had to do a few renamings (e.g., on 'struct bound_probe' the
field is called 'probe *prob' now, instead of 'struct probe *probe')
because GCC was complaining about naming the field using the same name
as the class. Nothing major, though. Generally speaking, the logic
behind and the design behind the code are the same.
Even though I'm sending a series of patches, they need to be tested
and committed as a single unit, because of inter-dependencies. But it
should be easier to review in separate logical units.
I've regtested this patch on BuildBot, no regressions found.
gdb/ChangeLog:
2017-11-22 Sergio Durigan Junior <sergiodj@redhat.com>
* break-catch-throw.c (fetch_probe_arguments): Use
'probe.prob' instead of 'probe.probe'.
* breakpoint.c (create_longjmp_master_breakpoint): Call
'can_evaluate_arguments' and 'get_relocated_address' methods
from probe.
(create_exception_master_breakpoint): Likewise.
(add_location_to_breakpoint): Use 'sal->prob' instead of
'sal->probe'.
(bkpt_probe_insert_location): Call 'set_semaphore' method from
probe.
(bkpt_probe_remove_location): Likewise, for 'clear_semaphore'.
* elfread.c (elf_get_probes): Use 'static_probe_ops' instead
of 'probe_ops'.
(probe_key_free): Call 'delete' on probe.
(check_exception_resume): Use 'probe.prob' instead of
'probe.probe'.
* location.c (string_to_event_location_basic): Call
'probe_linespec_to_static_ops'.
* probe.c (class any_static_probe_ops): New class.
(any_static_probe_ops any_static_probe_ops): New variable.
(parse_probes_in_pspace): Receive 'static_probe_ops' as
argument. Adjust code to reflect change.
(parse_probes): Use 'static_probe_ops' instead of
'probe_ops'. Adjust code to reflect change.
(find_probes_in_objfile): Call methods to get name and
provider from probe.
(find_probe_by_pc): Use 'result.prob' instead of
'result.probe'. Call 'get_relocated_address' method from
probe.
(collect_probes): Adjust comment and argument list to receive
'static_probe_ops' instead of 'probe_ops'. Adjust code to
reflect change. Call necessary methods from probe.
(compare_probes): Call methods to get name and provider from
probes.
(gen_ui_out_table_header_info): Receive 'static_probe_ops'
instead of 'probe_ops'. Use 'std::vector' instead of VEC,
adjust code accordingly.
(print_ui_out_not_applicables): Likewise.
(info_probes_for_ops): Rename to...
(info_probes_for_spops): ...this. Receive 'static_probe_ops'
as argument instead of 'probe_ops'. Adjust code. Call
necessary methods from probe.
(info_probes_command): Use 'info_probes_for_spops'.
(enable_probes_command): Pass correct argument to
'collect_probes'. Call methods from probe.
(disable_probes_command): Likewise.
(get_probe_address): Move to 'any_static_probe_ops::get_address'.
(get_probe_argument_count): Move to
'any_static_probe_ops::get_argument_count'.
(can_evaluate_probe_arguments): Move to
'any_static_probe_ops::can_evaluate_arguments'.
(evaluate_probe_argument): Move to
'any_static_probe_ops::evaluate_argument'.
(probe_safe_evaluate_at_pc): Use 'probe.prob' instead of
'probe.probe'.
(probe_linespec_to_ops): Rename to...
(probe_linespec_to_static_ops): ...this. Adjust code.
(probe_any_is_linespec): Rename to...
(any_static_probe_ops::is_linespec): ...this.
(probe_any_get_probes): Rename to...
(any_static_probe_ops::get_probes): ...this.
(any_static_probe_ops::type_name): New method.
(any_static_probe_ops::gen_info_probes_table_header): New
method.
(compute_probe_arg): Use 'pc_probe.prob' instead of
'pc_probe.probe'. Call methods from probe.
(compile_probe_arg): Likewise.
(std::vector<const probe_ops *> all_probe_ops): Delete.
(std::vector<const static_probe_ops *> all_static_probe_ops):
New variable.
(_initialize_probe): Use 'all_static_probe_ops' instead of
'all_probe_ops'.
* probe.h (struct info_probe_column) <field_name>: Delete
extraneous newline
(info_probe_column_s): Delete type and VEC.
(struct probe_ops): Delete. Replace with...
(class static_probe_ops): ...this and...
(clas probe): ...this.
(struct bound_probe) <bound_probe>: Delete extraneous
newline. Adjust constructor to receive 'probe' instead of
'struct probe'.
<probe>: Rename to...
<prob>: ...this. Delete extraneous newline.
<objfile>: Delete extraneous newline.
(register_probe_ops): Delete unused prototype.
(info_probes_for_ops): Rename to...
(info_probes_for_spops): ...this. Adjust comment.
(get_probe_address): Move to 'probe::get_address'.
(get_probe_argument_count): Move to
'probe::get_argument_count'.
(can_evaluate_probe_arguments): Move to
'probe::can_evaluate_arguments'.
(evaluate_probe_argument): Move to 'probe::evaluate_argument'.
* solib-svr4.c (struct svr4_info): Adjust comment.
(struct probe_and_action) <probe>: Rename to...
<prob>: ...this.
(register_solib_event_probe): Receive 'probe' instead of
'struct probe' as argument. Use 'prob' instead of 'probe'
when applicable.
(solib_event_probe_action): Call 'get_argument_count' method
from probe. Adjust comment.
(svr4_handle_solib_event): Adjust comment. Call
'evaluate_argument' method from probe.
(svr4_create_probe_breakpoints): Call 'get_relocated_address'
from probe.
(svr4_create_solib_event_breakpoints): Use 'probe' instead of
'struct probe'. Call 'can_evaluate_arguments' from probe.
* symfile.h: Forward declare 'class probe' instead of 'struct
probe'.
* symtab.h: Likewise.
(struct symtab_and_line) <probe>: Rename to...
<prob>: ...this.
* tracepoint.c (start_tracing): Use 'prob' when applicable.
Call probe methods.
(stop_tracing): Likewise.
|
|
Currently, encode_actions_rsp returns two malloc'ed arrays of malloc'ed
strings (char *) by pointer. Change this to use
std::vector<std::string>. This eliminates some cleanups in remote.c.
Regtested on the buildbot.
gdb/ChangeLog:
* tracepoint.h (class collection_list) <stringify>: Return
std::vector<std::string>.
(encode_actions_rsp): Change parameters to
std::vector<std::string> *.
* tracepoint.c (collection_list::stringify): Return
std::vector<std::string> and adjust accordingly.
(encode_actions_rsp): Changee parameters to
std::vector<std::string> and adjust accordingly.
* remote.c (free_actions_list),
free_actions_list_cleanup_wrapper): Remove.
(remote_download_tracepoint): Adjust to std::vector.
|
|
This constifies the add_setshow_* family of functions, and then fixes
up the fallout. The bulk of this patch was written by script.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* ada-lang.c (catch_ada_exception_command): Constify.
(catch_assert_command): Constify.
* break-catch-throw.c (catch_catch_command, catch_throw_command)
(catch_rethrow_command): Constify.
(catch_exception_command_1): Constify.
* breakpoint.h (add_catch_command): Constify.
* break-catch-syscall.c (catch_syscall_command_1): Constify.
(catch_syscall_split_args): Constify.
* break-catch-sig.c (catch_signal_command): Constify.
(catch_signal_split_args): Constify.
* cli/cli-decode.h (struct cmd_list_element) <function>: Use
cmd_const_sfunc_ftype.
* cli/cli-decode.c (add_setshow_cmd_full): Constify.
(add_setshow_enum_cmd, add_setshow_auto_boolean_cmd)
(add_setshow_boolean_cmd, add_setshow_filename_cmd)
(add_setshow_string_cmd, struct cmd_list_element)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd):
Constify.
(set_cmd_sfunc): Constify.
(empty_sfunc): Constify.
* command.h (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd)
(add_setshow_boolean_cmd, add_setshow_filename_cmd)
(add_setshow_string_cmd, add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
Constify.
(set_cmd_sfunc): Constify.
(cmd_sfunc_ftype): Remove.
* compile/compile.c (set_compile_args): Constify.
* infrun.c (set_disable_randomization): Constify.
* infcmd.c (set_args_command, set_cwd_command): Constify.
* breakpoint.c (set_condition_evaluation_mode): Constify.
(add_catch_command): Constify.
(catch_fork_command_1, catch_exec_command_1)
(catch_load_command_1, catch_unload_command_1): Constify.
(catch_load_or_unload): Constify.
* guile/scm-param.c (pascm_set_func): Constify.
(add_setshow_generic): Constify.
* python/py-param.c (get_set_value): Constify.
* top.h (set_verbose): Constify.
* tui/tui-win.c (tui_set_var_cmd): Constify.
* mi/mi-main.c (set_mi_async_command): Constify.
* cli/cli-logging.c (set_logging_overwrite)
(set_logging_redirect): Constify.
* value.c (set_max_value_size): Constify.
* valprint.c (set_input_radix, set_output_radix): Constify.
* utils.c (set_width_command, set_height_command): Constify.
* typeprint.c (set_print_type_methods, set_print_type_typedefs): Constify.
* tracepoint.c (set_disconnected_tracing)
(set_circular_trace_buffer, set_trace_buffer_size)
(set_trace_user, set_trace_notes, set_trace_stop_notes): Constify.
* top.c (set_history_size_command, set_verbose, set_editing)
(set_gdb_datadir, set_history_filename): Constify.
* target.c (set_targetdebug, maint_set_target_async_command)
(maint_set_target_non_stop_command, set_target_permissions)
(set_write_memory_permission): Constify.
(open_target): Constify.
* target-descriptions.c (set_tdesc_filename_cmd): Constify.
* target-dcache.c (set_stack_cache, set_code_cache): Constify.
* symtab.c (set_symbol_cache_size_handler): Constify.
* symfile.c (set_ext_lang_command): Constify.
* symfile-debug.c (set_debug_symfile): Constify.
* source.c (set_directories_command): Constify.
* solib.c (reload_shared_libraries, gdb_sysroot_changed): Constify.
* serial.c (set_parity): Constify.
* rs6000-tdep.c (powerpc_set_soft_float, powerpc_set_vector_abi): Constify.
* remote.c (set_remote_exec_file, set_remotebreak)
(set_remote_protocol_Z_packet_cmd, set_range_stepping): Constify.
* record.c (set_record_insn_history_size)
(set_record_call_history_size): Constify.
* record-full.c (set_record_full_insn_max_num): Constify.
* proc-api.c (set_procfs_trace_cmd, set_procfs_file_cmd): Constify.
* osabi.c (set_osabi): Constify.
* mips-tdep.c (set_mips64_transfers_32bit_regs)
(reinit_frame_cache_sfunc, mips_abi_update): Constify.
* maint.c (maintenance_set_profile_cmd): Constify.
* linux-thread-db.c (set_libthread_db_search_path): Constify.
* language.c (set_language_command, set_range_command)
(set_case_command): Constify.
* infrun.c (set_non_stop, set_observer_mode)
(set_stop_on_solib_events, set_schedlock_func)
(set_exec_direction_func): Constify.
* infcmd.c (set_inferior_tty_command): Constify.
* disasm.c (set_disassembler_options_sfunc): Constify.
* demangle.c (set_demangling_command): Constify.
* dcache.c (set_dcache_size, set_dcache_line_size): Constify.
* cris-tdep.c (set_cris_version, set_cris_mode)
(set_cris_dwarf2_cfi): Constify.
* corefile.c (set_gnutarget_command): Constify.
* charset.c (set_host_charset_sfunc, set_target_charset_sfunc)
(set_target_wide_charset_sfunc): Constify.
* breakpoint.c (update_dprintf_commands): Constify.
* auto-load.c (set_auto_load_dir, set_auto_load_safe_path): Constify.
* arm-tdep.c (set_fp_model_sfunc, arm_set_abi)
(set_disassembly_style_sfunc): Constify.
* arch-utils.c (set_endian, set_architecture): Constify.
* alpha-tdep.c (reinit_frame_cache_sfunc): Constify.
* agent.c (set_can_use_agent): Constify.
|
|
This patch constifies add_info and updates all the info commands. The
bulk of this patch was written using a script; and then I did a manual
pass to fix up the remaining compilation errors.
I could not compile every changed file; in particular nto-procfs.c,
gnu-nat.c, and darwin-nat-info.c; but I at least tried to check the
correctness by inspection.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* frame.h (info_locals_command, info_args_command): Constify.
* auto-load.h (auto_load_info_scripts): Constify.
* inferior.h (registers_info): Constify.
* copying.c: Rebuild.
* copying.awk: Constify generated commands.
* auto-load.c (auto_load_info_scripts)
(info_auto_load_gdb_scripts): Constify.
* cli/cli-decode.c (struct cmd_list_element): Take a
cmd_const_cfunc_ftype.
* command.h (add_info): Take a cmd_const_cfunc_ftype.
* tui/tui-win.c (tui_all_windows_info): Constify.
* python/py-auto-load.c (info_auto_load_python_scripts):
Constify.
* cli/cli-cmds.c (show_command): Remove non-const overload.
* tracepoint.c (info_tvariables_command, info_scope_command):
Constify.
(info_static_tracepoint_markers_command): Constify.
* thread.c (info_threads_command): Constify.
(print_thread_info_1): Constify.
* target.c (info_target_command): Constify.
* symtab.c (info_sources_command, info_functions_command)
(info_types_command): Constify.
(info_variables_command): Remove non-const overload.
* symfile.c (info_ext_lang_command): Constify.
* stack.c (info_frame_command, info_locals_command)
(info_args_command): Constify.
(backtrace_command): Remove non-const overload.
* source.c (info_source_command, info_line_command): Constify.
* solib.c (info_sharedlibrary_command): Constify.
* skip.c (info_skip_command): Constify.
* ser-go32.c (info_serial_command): Constify.
* reverse.c (info_bookmarks_command): Constify.
* printcmd.c (info_symbol_command, info_address_command)
(info_display_command): Constify.
* osdata.c (info_osdata_command): Constify.
* objc-lang.c (info_selectors_command, info_classes_command):
Constify.
* nto-procfs.c (procfs_pidlist, procfs_meminfo): Constify.
* memattr.c (info_mem_command): Constify.
* macrocmd.c (info_macro_command, info_macros_command): Constify.
* linux-fork.c (info_checkpoints_command): Constify.
* infrun.c (info_signals_command): Constify.
* inflow.c (info_terminal_command): Constify.
* inferior.c (info_inferiors_command): Constify.
(print_inferior): Constify.
* infcmd.c (info_program_command, info_all_registers_command)
(info_registers_command, info_vector_command)
(info_float_command): Constify.
(registers_info): Constify.
* gnu-nat.c (info_send_rights_cmd, info_recv_rights_cmd)
(info_port_sets_cmd, info_dead_names_cmd, info_port_rights_cmd):
Constify.
* f-valprint.c (info_common_command): Constify.
* dcache.c (info_dcache_command): Constify.
(dcache_info_1): Constify.
* darwin-nat-info.c (info_mach_tasks_command)
(info_mach_task_command, info_mach_ports_command)
(info_mach_port_command, info_mach_threads_command)
(info_mach_thread_command, info_mach_regions_command)
(info_mach_regions_recurse_command, info_mach_region_command)
(info_mach_exceptions_command): Constify.
(get_task_from_args): Constify.
* cp-support.c (info_vtbl_command): Constify.
* breakpoint.c (info_watchpoints_command)
(info_tracepoints_command): Constify.
(info_breakpoints_command): Remove non-const overload.
* avr-tdep.c (avr_io_reg_read_command): Constify.
* auxv.c (info_auxv_command): Constify.
* ada-tasks.c (info_tasks_command): Constify.
(info_task): Constify.
* ada-lang.c (info_exceptions_command): Constify.
|
|
This changes add_com to take a cmd_const_cfunc_ftype, and then fixes
up all the command implementations.
In most cases this is trivial.
In a couple of places I had to again introduce a temporary non-const
overload. These overloads will be removed when add_info is
constified.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* solib.h (no_shared_libraries): Constify.
* frame.h (return_command): Constify.
* cli/cli-cmds.h (quit_command): Constify.
* top.h (quit_command, execute_command): Constify.
* target.h (flash_erase_command): Constify.
* inferior.h (set_inferior_args, attach_command): Constify.
* tracepoint.h (start_tracing, stop_tracing): Constify.
* breakpoint.h (break_command, tbreak_command)
(hbreak_command_wrapper, thbreak_command_wrapper)
(rbreak_command_wrapper, watch_command_wrapper)
(awatch_command_wrapper, rwatch_command_wrapper)
(get_tracepoint_by_number): Constify.
* symtab.c (info_variables_command, rbreak_command)
(symtab_symbol_info): Constify.
(info_variables_command): Add non-const overload.
* top.c (dont_repeat_command): Constify.
* breakpoint.c (ignore_command, commands_command)
(condition_command, tbreak_command, hbreak_command)
(thbreak_command, clear_command, break_command)
(info_breakpoints_command, watch_command, rwatch_command)
(awatch_command, trace_command, ftrace_command, strace_command)
(trace_pass_command, break_range_command, dprintf_command)
(agent_printf_command, get_tracepoint_by_number)
(watch_maybe_just_location, trace_pass_command): Constify.
(info_breakpoints_command): Add non-const overload.
* tracefile.c (tsave_command): Constify.
* infcmd.c (attach_command, disconnect_command, signal_command)
(queue_signal_command, stepi_command, nexti_command)
(finish_command, next_command, step_command, until_command)
(advance_command, jump_command, continue_command, run_command)
(start_command, starti_command, interrupt_command)
(run_command_1, set_inferior_args, step_1): Constify.
* inferior.c (add_inferior_command, remove_inferior_command)
(clone_inferior_command): Constify.
* linux-fork.c (checkpoint_command, restart_command): Constify.
* windows-nat.c (signal_event_command): Constify.
* guile/guile.c (guile_repl_command, guile_command): Constify.
* printcmd.c (x_command, display_command, printf_command)
(output_command, set_command, call_command, print_command)
(eval_command): Constify.
(non_const_set_command): Remove.
(_initialize_printcmd): Update.
* source.c (forward_search_command, reverse_search_command):
Constify.
* jit.c (jit_reader_load_command, jit_reader_unload_command):
Constify.
* infrun.c (handle_command): Constify.
* memattr.c (mem_command): Constify.
* stack.c (return_command, up_command, up_silently_command)
(down_command, down_silently_command, frame_command)
(backtrace_command, func_command, backtrace_command_1): Constify.
(backtrace_command): Add non-const overload.
* remote-sim.c (simulator_command): Constify.
* exec.c (set_section_command): Constify.
* tracepoint.c (tdump_command, trace_variable_command)
(tstatus_command, tstop_command, tstart_command)
(end_actions_pseudocommand, while_stepping_pseudocommand)
(collect_pseudocommand, teval_pseudocommand, actions_command)
(start_tracing, stop_tracing): Constify.
* value.c (init_if_undefined_command): Constify.
* tui/tui-stack.c (tui_update_command): Constify.
* tui/tui-win.c (tui_refresh_all_command)
(tui_set_tab_width_command, tui_set_win_height_command)
(tui_set_focus_command, tui_scroll_forward_command)
(tui_scroll_backward_command, tui_scroll_left_command)
(tui_scroll_right_command, parse_scrolling_args, tui_set_focus)
(tui_set_win_height): Constify.
* tui/tui-layout.c (tui_layout_command): Constify.
* procfs.c (proc_trace_syscalls, proc_trace_sysentry_cmd)
(proc_trace_sysexit_cmd, proc_untrace_sysentry_cmd)
(proc_untrace_sysexit_cmd): Constify.
* remote.c (threadlist_test_cmd, threadinfo_test_cmd)
(threadset_test_cmd, threadlist_update_test_cmd)
(threadalive_test): Constify.
* objc-lang.c (print_object_command): Constify.
* command.h (add_com): Constify.
* cli/cli-dump.c (restore_command): Constify.
* cli/cli-cmds.c (pwd_command, echo_command, quit_command)
(help_command, complete_command, shell_command, edit_command)
(list_command, disassemble_command, make_command)
(apropos_command, alias_command): Constify.
* cli/cli-script.c (document_command, define_command)
(while_command, if_command, validate_comname): Constify.
* cli/cli-decode.c (struct cmd_list_element): Change type of
"fun".
* target.c (do_monitor_command, flash_erase_command): Constify.
* regcache.c (reg_flush_command): Constify.
* reverse.c (reverse_step, reverse_next, reverse_stepi)
(reverse_nexti, reverse_continue, reverse_finish)
(save_bookmark_command, goto_bookmark_command)
(exec_reverse_once): Constify.
* python/python.c (python_interactive_command, python_command):
Constify.
* typeprint.c (ptype_command, whatis_command, whatis_exp):
Constify.
* solib.c (sharedlibrary_command, no_shared_libraries): Constify.
* gcore.c (gcore_command): Constify.
|
|
We are passing a const char * to a const char * parameter, the
const_cast is not necessary.
gdb/ChangeLog:
* tracepoint.c (tfind_command): Remove const_cast.
|
|
This patch replaces the last usages of VEC(mem_range_s) with
std::vector<mem_range>. This allows getting rid of a few cleanups and
of the DEF_VEC_O(mem_range_s).
I added a test for normalize_mem_ranges to make sure I didn't break
anything there.
Regtested on the buildbot.
gdb/ChangeLog:
* memrange.h (struct mem_range): Define operator< and operator==.
(mem_range_s): Remove.
(DEF_VEC_O (mem_range_s)): Remove.
(normalize_mem_ranges): Change parameter type to std::vector.
* memrange.c (compare_mem_ranges): Remove.
(normalize_mem_ranges): Change parameter type to std::vector,
adjust to vector change.
* exec.c (section_table_available_memory): Return vector, remove
parameter.
(section_table_read_available_memory): Adjust to std::vector
change.
* remote.c (remote_read_bytes): Adjust to std::vector
change.
* tracepoint.h (traceframe_available_memory): Change parameter
type to std::vector.
* tracepoint.c (traceframe_available_memory): Change parameter
type to std::vector, adjust.
* gdb/mi/mi-main.c (mi_cmd_trace_frame_collected): Adjust to
std::vector change.
* gdb/Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/memrange-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add memrange-selftests.o.
* gdb/unittests/memrange-selftests.c: New file.
|
|
An earlier patch of mine changed parse_traceframe_info to make it return
a unique_ptr. I forgot to update the version of the function used in an
expat-less build, this patch fixes it.
gdb/ChangeLog:
* tracepoint.c (parse_traceframe_info): Return a unique_ptr
(the !HAVE_LIBEXPAT version).
|
|
Since this target method returns an allocated object, return a
unique_ptr. It allows getting rid a some cleanups here and there.
I had to shuffle the includes around. First, target.h now needs to
include tracepoint.h, to get the definition of traceframe_info_up.
However, the definition of enum trace_find_type was later in target, so
I had to move it to tracepoint.h, so that the declaration of tfind_1
could know about it. I then had to remove the include of target.h from
tracepoint.h, which caused a circular dependency (it was probably
included to get enum trace_find_type in the first place anyway).
Regression tested on the buildbot.
gdb/ChangeLog:
* target.h: Include tracepoint.h.
(enum trace_find_type): Move to tracepoint.h.
(struct target_ops) <to_traceframe_info>: Return a unique ptr.
* tracepoint.h: Don't include target.h
(enum trace_find_type): Move from target.h.
(parse_traceframe_info): Return a unique ptr.
* tracepoint.c (current_traceframe_info): Change type to unique
ptr.
(free_traceframe_info): Remove.
(clear_traceframe_info): Don't manually free
current_traceframe_info.
(free_result): Remove.
(parse_traceframe_info): Return a unique ptr.
(get_traceframe_info): Adjust to unique ptr.
* ctf.c (ctf_traceframe_info): Return a unique ptr.
* remote.c (remote_traceframe_info): Return a unique ptr.
* tracefile-tfile.c (tfile_traceframe_info): Return a unique
ptr.
* target-debug.h (target_debug_print_traceframe_info_up): New
macro.
* target-delegates.c: Regenerate.
|
|
Straightforward change from a VEC to std::vector. This allows making
the destruction of a traceframe_info trivial.
I added a constructor with parameters to mem_range to be able to
emplace_back directly with the values. It is necessary to leave a
default constructor there because mem_range is still used in a VEC.
gdb/ChangeLog:
* memrange.h (struct mem_range): Add constructors.
* tracepoint.h (struct traceframe_info) <memory>: Change type to
std::vector<mem_range>.
* tracepoint.c (free_traceframe_info): Don't manually free
vector.
(traceframe_info_start_memory): Adjust to vector change.
(traceframe_available_memory): Likewise.
* tracefile-tfile.c (build_traceframe_info): Likewise.
* ctf.c (ctf_traceframe_info): Likewise.
|
|
Straightforward change to get rid of a VEC. We need to new/delete
traceframe_info instead of malloc/free it. I found three places that
allocate a traceframe_info (ctf_traceframe_info, tfile_traceframe_info
and parse_traceframe_info) and only one that frees it
(free_traceframe_info).
gdb/ChangeLog:
* tracepoint.h (struct traceframe_info) <tvars>: Change type to
std::vector<int>.
* tracepoint.c (free_traceframe_info): Deallocate with delete.
(traceframe_info_start_tvar): Adjust to vector change.
(parse_traceframe_info): Allocate with new.
* ctf.c (ctf_traceframe_info): Allocate with new, adjust to
vector change.
* tracefile-tfile.c (build_traceframe_info): Adjust to vector
change.
tfile_traceframe_info): Allocate with new.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Adjust to vector
change.
|
|
... so it doesn't shadow the traceframe_info type. It think it's a
clearer name anyway.
gdb/ChangeLog:
* tracepoint.c (traceframe_info): Rename to...
(current_traceframe_info): ...this.
(clear_traceframe_info): Adjust.
(get_traceframe_info): Adjust.
|
