| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* doc/gdbint.texinfo: Update GET_LONGJMP_TARGET, L_SET doc.
* irix4-nat.c, mips-nat.c (JB_ELEMENT_SIZE, get_longjmp_target):
Move from mips-tdep.c and tm-{irix3,mips}.h.
* mips-nat.c: Remove a bunch of code that was ifdef'd out of
native MIPS ports.
* nm-irix3.h, nm-mips.h (GET_LONGJMP_TARGET): Move from tm-irix3.h
and tm-mips.h.
* ultra3-nat.c (register_addr): Move from ultra3-xdep.c.
(fetch_core_registers): Fix bfd_seek arguments.
|
|
symbol. #define MIPS_EFI_SYMBOL_NAME instead. Use different
value so that demangler won't be invoked. This greatly speeds up
stepping.
* mips-tdep.c (mips_pop_frame): Rewrite handling of
linked_proc_info so that it properly deallocates the appropriate
item after it is done with it instead of before.
* Don't pass bogus frame pointer to create_new_frame(). Just
leave it as zero so that lower level code will figure out the
correct value.
|
|
* blockframe.c (get_prev_frame_info): If INIT_FRAME_PC_FIRST is
set, run it before INIT_EXTRA_FRAME_INFO.
* stack.c (frame_info): If PRINT_EXTRA_FRAME_INFO defined, call it.
* mips-tdep.c (init_extra_frame_info): Only clobber the `frame'
(FP) value in the frame_info struct if it is zero (as from top of
execution stack).
(setup_arbitrary_frame): Implement FRAME_SPECIFICATION_DYADIC.
* mips-xdep.c (fetch_inferior_registers): ZERO_REGNUM always
comes back as zero. So does FP_REGNUM, as a trigger for
init_extra_frame_info.
* tm-mips.h (INIT_FRAME_PC_FIRST): Kludge, FIXME, defined to get
the program counter set before INIT_EXTRA_FRAME_INFO is run.
(INIT_FRAME_PC): Defined to null.
(PRINT_EXTRA_FRAME_INFO): print frame pointer location via symtab.
(FRAME_SPECIFICATION_DYADIC): Ask for two args in frame command.
Briefly explain MIPS stacks in GDB.
|
|
* tm-mips.h (REGISTER_VIRTUAL_TYPE): Float regs are float type.
* mips-tdep.c (mips_print_register): Alloc enough space for two regs.
|
|
* tm-mips.h (GDB_TARGET_IS_MIPS): Define for mips-xdep.c.
(READ_MIPS_FORMAT, COFF_FORMAT): Remove, unused now.
* mips-xdep.c: Remove most include files (unused, caused errs).
(fetch_core_registers): Use right parameters in dummy fn.
|
|
(VERSION): Bump to 4.4.85.
* mipsread.c: Update for new include files. Lint.
* tm-irix3.h, tm-mips.h: Use new include files for ECOFF symtab.
* config/{bigmips.mt, littlemips.mt, irix3.mt, decstation.mt}:
Don't need to bring in mipsread.o specially any more.
|
|
routine (for Irix-4.x). Make many funcs static and void.
* mips-tdep.c (mips-frame-chain): Clean up, simplify.
* (init_extra_frame_info): Don't trash cached value of frame
pointer register. This fixes backtracing through routines that use
alloca(). Generally clean up declarations of functions, and use
typedefs and macros to reference data structures as appropriate.
* tm-irix3.h, tm-mips.h (EXTRA_FRAME_INFO): use proper type for
proc_desc element.
|
|
.gdbinfo. symbols are created. Move creation from parse_procedure
to parse_symbol, where it is fairly easy to grow the symtab. This
also fixes a symtab trashing bug on all mips-based systems.
* (got_numargs, lookup_numargs, free_numargs): Delete. Not
needed anymore.
* tm-mips.h, tm-iris3.h, mips-tdep.c, mipsread.c: Re-do struct
mips_extra_func_info, and all the PROC_xxx macros that look at it.
|
|
basis. See comments in objfiles.h and details in ChangeLog. Also remove
redundant definitions of FRAME_CHAIN_VALID from most of the tm-* files and
use a default definition in frame.h.
|
|
gdb/.Sanitize gdb/configure.in gdb/mips-tdep.c gdb/mipsread.c
gdb/procfs.c gdb/signame.h gdb/tm-irix3.h gdb/tm-mips.h
gdb/xm-irix4.h gdb/config/.Sanitize gdb/config/mt-irix3
gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
|
|
size, and use throughout. Round buffer size up if too many regs.
Support baud rate setting and try for an 8-bit path. If
interrupted while waiting for target, send a ^C down the wire.
Avoid single-byte reads.
* tm-mips.h: Add more embedded-system registers to REGISTER_NAMES
and NUM_REGS.
* mips-xdep.h: Avoid the embedded regs when on Unix.
|
|
breakpoint.h, tm-sun4os4.h, tm-sparc.h, sparc-tdep.c, tm-mips.h,
mips-tdep.h, tm-sun3.h, tm-68k.h, m68k-tdep.h: Add support for
stepping (and nexting) through longjmp(). Also, cleanup
breakpoint handling quite a bit by creating explicit breakpoint
types instead of using magic breakpoint numbers.
Makefile.in: Update version to 4.4.3
|
|
|
|
mips-tfile has been hacked to act more "traditionally."
* dbxread.c: Fixed typo in comment.
|
|
encapsulated in mips ecoff. See ChangeLog for the gory details.
|
|
since it was always defined exactly the same in all of them.
|
|
READ_MIPS_FORMAT, which have been unused since BFD. Still
remaining is COFF_NO_LONG_FILE_NAMES.
* tm-sun3.h, tm-altos.h: Remove detritus accidentally left from
function calling code moved to m68k-tdep.c.
|
|
* utils.c: All the v*fprintf emulation is now in libiberty,
so we can get rid of some junk.
* xm-sun3os4.h, xm-sun4os4.h, xconfig/decstation, xconfig/i386sco,
xconfig/sun3os4, xconfig/sun4os4: Don`t need HAVE_STRSTR any more.
* m68k-pinsn.c (print_insn_arg): Support BB/BW/BL
type operands, as used by branch instructions.
* gmalloc.c: Fix prototype of memcpy.
* elfread.c: Comment out register_addr, since it conflicts
with the one in coredep.c.
* buildsym.h: Remove extern declarations of two functions
that are really static in buildsym.c.
* tm-mips.h: Add symbolic names for more registers.
* mips-xdep.c (store_inferior_registers): Use new register names.
* xm-mips.h: Simplify REGISTER_U_ADDR, since it is now
only used for core files, not ptrace. Therefore,
the KERNEL_U_ADDR hack is no longer needed.
The mapping to ptrace number is now in in mips-xdep.c.
* mips-xdep.c: Define REGISTER_PTRACE_ADDR (using the
mapping from the old REGISTER_U_ADDR), and use it
in {fetch,store}_inferior_registers.
* mipsread.c: Rename #include ecoff.h to new name coff-mips.h.
* mips-tdep.c (mips_push_dummy_frame, mips_pop_frame):
Save/restore FP regs correctly (?).
* dbxread.c: Remove duplicate define_symbol and type_synonym_name
(these had been previously moved to buildsym.c).
Hence, define_symbol becomes extern instead of static.
* buildsym.c (read_struct_type): Comment out bogus handling
of C++ operator methods. Minor hacking of reading of class
contexts. Make define_symbol non-static, so dbxread.c can call it.
|
|
* tm-29k.h, tm-88k.h, tm-i960.h, tm-irix3.h, tm-mips.h, tm-pyr.h,
tm-sparc.h: Accept fromleaf parameter.
|
|
REGISTER_U_ADDR to corresponding xm- file. Sugg. by Peter Schauer.
|
|
* blockframe.c (get_prev_frame_info): If FRAME_CHAIN_COMBINE
returns 0, there is no previous frame.
* breakpoint.c (commands_command): If !from_tty, don't call
input_from_terminal_p().
* dbxread.c (record_misc_function): Speed up slightly.
(compare_psymbols): Ditto.
* infcmd.c (do_registers_info): Take a second argument to
determine whether to print float registers. "info registers"
does not do so anymore. "info all-registers" does, now.
* mips-tdep.c, pyr-tdep.c (xxx_do_registers_info): Take second
arg and ignore it.
* tm-mips.h, tm-pyr.h (DO_REGISTERS_INFO): Pass second arg.
* inflow.c (initialize_inflow): Set tflags_ours correctly.
|
|
|
|
|
