| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Many test cases had a few lines in the beginning that look like:
if { condition } {
continue
}
Where conditions varied, but were mostly in the form of ![runto_main] or
[skip_*_tests], making it quite clear that this code block was supposed
to finish the test if it entered the code block. This generates TCL
errors, as most of these tests are not inside loops. All cases on which
this was an obvious mistake are changed in this patch.
|
|
Commit c67f4e538 ("gdb/testsuite: make gdb.ada/mi_prot.exp stop at
expected location") introduced some DUPLICATEs in MI tests using
mi_continue_to_line, for example:
DUPLICATE: gdb.ada/mi_ref_changeable.exp: mi_continue_to_line: set temporary breakpoint
These test names were previously differentiated by the location passed
to mi_continue_to_line. Since the location can contain a path, that
commit removed the location from the test name, in favor of a hardcoded
string "set temporary breakpoint", hence removing the differentiator.
mi_continue_to_line receives a "test" parameter, containing a test
name. Add a "with_test_prefix" with that name, so that all tests
recorded during mi_continue_to_line have this in their name.
mi_continue_to_line passes that "test" string to mi_get_stop_line, that
is a bit superfluous. mi_get_stop_line only uses that string in case of
failures (it doesn't record a pass if everything goes fine). Since it's
not crucial, just remove it, and adjust all callers.
Adjust three gdb.mi/mi-var-*.exp tests to use prefixes to differentiate
the multiple calls to mi_run_inline_test (which calls
mi_continue_to_line).
Change-Id: I511c6caa70499f8657b1cde37d71068d74d56a74
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
On OBS I ran into:
...
PASS: gdb.mi/mi-var-cp.exp: run to mi-var-cp.cc:81 (set breakpoint)
UNRESOLVED: gdb.mi/mi-var-cp.exp: unable to start target
...
followed by 81 FAILs and two more UNRESOLVEDs.
I didn't manage to reproduce this, but I did notice that the initial
problem causing the UNRESOLVED caused all subsequent UNRESOLVEDs and FAILs.
I emulated the problem by commenting out the send_gdb "run\n" in
mi_run_cmd_full.
Fix this by:
- handling mi_run_cmd failure in mi_get_inline_test
- handling mi_run_inline_test failure in gdb.mi/mi-var-cp.exp, and
other test-cases using mi_get_inline_test
Tested on x86_64-linux.
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
|
|
* config/monitor.exp (gdb_target_cmd): Remove semicolon after
'return'.
(gdb_target_monitor, gdb_load): Likewise.
* config/sid.exp (gdb_load): Likewise.
* config/slite.exp (gdb_load): Likewise.
* config/vx.exp (gdb_start, spawn_vxgdb): Likewise.
* gdb.ada/arrayidx.exp, gdb.ada/null_array.exp: Likewise.
* gdb.arch/mips-octeon-bbit.exp (single_step): Likewise.
(single_step_until): Likewise.
* gdb.arch/powerpc-d128-regs.exp: Likewise.
* gdb.arch/system-gcore.exp: Likewise.
* gdb.base/bigcore.exp (extract_heap): Likewise.
* gdb.base/break-on-linker-gcd-function.exp: Likewise.
* gdb.base/call-ar-st.exp: Likewise.
* gdb.base/call-rt-st.exp: Likewise.
* gdb.base/call-sc.exp, gdb.base/call-strs.exp: Likewise.
* gdb.base/callfuncs.exp, gdb.base/completion.exp: Likewise.
* gdb.base/condbreak.exp, gdb.base/constvars.exp: Likewise.
* gdb.base/corefile.exp: Likewise.
* gdb.base/dbx.exp (gdb_file_cmd): Likewise.
* gdb.base/exprs.exp, gdb.base/fileio.exp: Likewise.
* gdb.base/fixsection.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/gcore-buffer-overflow.exp: Likewise.
* gdb.base/gcore-relro.exp: Likewise.
* gdb.base/gcore.exp, gdb.base/gdb11530.exp: Likewise.
* gdb.base/gdb11531.exp, gdb.base/gnu-ifunc.exp: Likewise.
* gdb.base/info-os.exp, gdb.base/info-proc.exp: Likewise.
* gdb.base/interp.exp, gdb.base/langs.exp:: Likewise.
* gdb.base/list.exp: Likewise.
(set_listsize): Likewise.
* gdb.base/logical.exp, gdb.base/mips_pro.exp: Likewise.
* gdb.base/miscexprs.exp, gdb.base/nodebug.exp: Likewise.
* gdb.base/opaque.exp, gdb.base/pointers.exp: Likewise.
* gdb.base/psymtab.exp, gdb.base/ptype.exp: Likewise.
* gdb.base/relational.exp, gdb.base/scope.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
(test_set): Likewise.
* gdb.base/signals.exp, gdb.base/sizeof.exp: Likewise.
* gdb.base/solib-overlap.exp: Likewise.
* gdb.base/store.exp, gdb.base/structs.exp: Likewise.
* gdb.base/structs2.exp, gdb.base/volatile.exp: Likewise.
* gdb.base/watchpoint.exp (initialize): Likewise.
(test_simple_watchpoint): Likewise.
(test_disabling_watchpoints): Likewise.
(test_watchpoint_triggered_in_syscall): Likewise.
* gdb.base/whatis.exp, gdb.cp/ambiguous.exp: Likewise.
* gdb.cp/casts.exp, gdb.cp/ctti.exp: Likewise.
* gdb.cp/namespace.exp, gdb.cp/nsdecl.exp: Likewise.
* gdb.cp/psmang.exp, gdb.dwarf2/dw2-ranges.exp: Likewise.
* gdb.hp/gdb.aCC/optimize.exp: Likewise.
* gdb.hp/gdb.aCC/watch-cmd.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.hp/gdb.base-hp/pxdb.exp: Likewise.
* gdb.hp/gdb.compat/xdb1.exp: Likewise.
* gdb.hp/gdb.compat/xdb2.exp: Likewise.
* gdb.hp/gdb.compat/xdb3.exp: Likewise.
* gdb.hp/gdb.defects/bs14602.exp: Likewise.
* gdb.hp/gdb.defects/solib-d.exp: Likewise.
* gdb.mi/gdb792.exp: Likewise.
* gdb.mi/mi-inheritance-syntax-error.exp: Likewise.
* gdb.mi/mi-logging.exp, gdb.mi/mi-var-cp.exp : Likewise.
* gdb.mi/mi-var-rtti.exp, gdb.python/py-type.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
(load_core): Likewise.
* gdb.threads/pthreads.exp (all_threads_running): Likewise.
(test_startup, check_control_c): Likewise.
* gdb.threads/sigstep-threads.exp: Likewise.
* gdb.threads/thread_check.exp: Likewise.
* gdb.trace/backtrace.exp, gdb.trace/change-loc.exp: Likewise.
* gdb.trace/circ.exp (run_trace_experiment): Likewise.
(set_a_tracepoint, trace_buffer_normal): Likewise.
(gdb_trace_circular_tests): Likewise.
* gdb.trace/collection.exp: Likewise.
* gdb.trace/disconnected-tracing.exp: Likewise.
* gdb.trace/infotrace.exp: Likewise.
* gdb.trace/mi-traceframe-changed.exp: Likewise.
* gdb.trace/mi-tracepoint-changed.exp: Likewise.
* gdb.trace/mi-tsv-changed.exp (test_create_delete_modify_tsv): Likewise.
* gdb.trace/packetlen.exp, gdb.trace/passc-dyn.exp: Likewise.
* gdb.trace/pending.exp, gdb.trace/report.exp: Likewise.
* gdb.trace/stap-trace.exp: Likewise.
* gdb.trace/status-stop.exp,gdb.trace/strace.exp: Likewise.
* gdb.trace/tfind.exp, gdb.trace/trace-break.exp: Likewise.
* gdb.trace/trace-buffer-size.exp: Likewise.
* gdb.trace/tspeed.exp, gdb.trace/tsv.exp: Likewise.
* gdb.trace/unavailable.exp: Likewise.
* gdb.trace/while-dyn.exp: Likewise.
* lib/fortran.exp (set_lang_fortran): Likewise.
* lib/gdb.exp (default_gdb_version, gdb_start_cmd): Likewise.
(gdb_breakpoint, gdb_reinitialize_dir): Likewise.
(default_gdb_start, get_compiler_info): Likewise.
(gdb_compile, gdb_compile_objc, gdb_reload, gdb_init): Likewise.
(get_debug_format, setup_xfail_format): Likewise.
(rerun_to_main, gdb_skip_float_test): Likewise.
(build_id_debug_filename_get, get_remotetimeout): Likewise.
* lib/java.exp (set_lang_java): Likewise.
* lib/mi-support.exp (default_mi_gdb_start): Likewise.
(mi_gdb_reinitialize_dir, mi_gdb_target_cmd): Likewise.
(mi_gdb_file_cmd, mi_gdb_test): Likewise.
(mi_run_cmd_full, mi_expect_interrupt): Likewise.
* lib/objc.exp (set_lang_objc): Likewise.
* lib/pascal.exp (set_lang_pascal): Likewise.
* lib/prompt.exp (default_prompt_gdb_start): Likewise.
* lib/trace-support.exp (gdb_trace_setactions, gdb_tfind_test): Likewise.
(gdb_readexpr, gdb_gettpnum, gdb_find_recursion_test_baseline): Likewise.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
* cli/cli-decode.c (set_cmd_prefix): New.
(lookup_cmd_for_prefixlist): New.
(add_prefix_cmd): Call set_cmd_prefix and update field 'prefix'
of each cmd_list_element in *prefixlist.
(add_setshow_cmd_full): set_cmd_prefix.
(add_alias_cmd): Likewise.
* cli/cli-decode.h (struct cmd_list_element) <prefix>: New field.
Declare 'auto_boolean_enums'.
* cli/cli-setshow.c: Include "observer.h".
(notify_command_param_changed_p): New.
(add_setshow_auto_boolean_cmd): Move auto_boolean_enums out.
Remove 'static'.
(do_setshow_command): Split it to ...
(do_set_command, do_show_command): ... them. New.
(do_set_command): Call observer_notify_command_param_changed if
notify_command_param_changed_p returns true.
(cmd_show_list): Caller update.
* auto-load.c (set_auto_load_cmd): Likewise.
* remote.c (show_remote_cmd): Likewise.
* cli/cli-setshow.h: Update declarations.
* top.c (execute_command): Call do_set_command and do_show_command.
* NEWS: Mention new MI notification.
* mi/mi-interp.c: Declare mi_command_param_changed.
(mi_interpreter_init): Attach mi_command_param_changed to
observer command_param_changed.
(mi_command_param_changed): New.
Remove mi_suppress_breakpoint_notifications.
Define global variable mi_suppress_notification.
(mi_breakpoint_created): Update.
(mi_breakpoint_deleted): Likewise.
(mi_breakpoint_modified): Likewise.
* mi/mi-main.c (mi_cmd_execute): Likewise. Check command
'gdb-set' and set mi_suppress_notification.
* mi/mi-main.h: (mi_suppress_notification): New struct.
gdb/doc/
* observer.texi: New observer command_param_changed.
* gdb.texinfo (GDB/MI Async Records): Doc for '=cmd-param-changed'.
gdb/testsuite/
* gdb.mi/mi-cmd-param-changed.exp: New.
* gdb.mi/mi-cli.exp: Update for MI notification "=cmd-param-changed".
* gdb.mi/mi-var-rtti.exp, gdb.mi/mi2-cli.exp: Likewise.
* gdb.mi/mi2-prompt.exp: Likewise.
|
|
standard_output_file.
* gdb.mi/gdb2549.exp: Use standard_testfile.
* gdb.mi/gdb669.exp: Use standard_testfile.
* gdb.mi/gdb701.exp: Use standard_testfile.
* gdb.mi/gdb792.exp: Use standard_testfile.
* gdb.mi/mi-async.exp: Use standard_testfile.
* gdb.mi/mi-basics.exp: Use standard_testfile.
* gdb.mi/mi-break.exp: Use standard_testfile.
* gdb.mi/mi-cli.exp: Use standard_testfile.
* gdb.mi/mi-console.exp: Use standard_testfile.
* gdb.mi/mi-disassemble.exp: Use standard_testfile.
* gdb.mi/mi-eval.exp: Use standard_testfile.
* gdb.mi/mi-file-transfer.exp: Use standard_testfile.
* gdb.mi/mi-file.exp: Use standard_testfile.
* gdb.mi/mi-inheritance-syntax-error.exp: Use standard_testfile.
* gdb.mi/mi-logging.exp: Use standard_testfile.
* gdb.mi/mi-nonstop-exit.exp: Use standard_testfile.
* gdb.mi/mi-nonstop.exp: Use standard_testfile.
* gdb.mi/mi-ns-stale-regcache.exp: Use standard_testfile.
* gdb.mi/mi-nsintrall.exp: Use standard_testfile.
* gdb.mi/mi-nsmoribund.exp: Use standard_testfile.
* gdb.mi/mi-nsthrexec.exp: Use standard_testfile.
* gdb.mi/mi-pending.exp: Use standard_testfile,
standard_output_file.
* gdb.mi/mi-pthreads.exp: Use standard_testfile.
* gdb.mi/mi-read-memory.exp: Use standard_testfile.
* gdb.mi/mi-regs.exp: Use standard_testfile.
* gdb.mi/mi-return.exp: Use standard_testfile.
* gdb.mi/mi-reverse.exp: Use standard_testfile.
* gdb.mi/mi-simplerun.exp: Use standard_testfile.
* gdb.mi/mi-solib.exp: Use standard_testfile,
standard_output_file.
* gdb.mi/mi-stack.exp: Use standard_testfile.
* gdb.mi/mi-stepi.exp: Use standard_testfile.
* gdb.mi/mi-stepn.exp: Use standard_testfile.
* gdb.mi/mi-syn-frame.exp: Use standard_testfile.
* gdb.mi/mi-until.exp: Use standard_testfile.
* gdb.mi/mi-var-block.exp: Use standard_testfile.
* gdb.mi/mi-var-child-f.exp: Use standard_testfile.
* gdb.mi/mi-var-child.exp: Use standard_testfile.
* gdb.mi/mi-var-cmd.exp: Use standard_testfile.
* gdb.mi/mi-var-cp.exp: Use standard_testfile.
* gdb.mi/mi-var-display.exp: Use standard_testfile.
* gdb.mi/mi-var-invalidate.exp: Use standard_testfile,
standard_output_file.
* gdb.mi/mi-var-rtti.exp: Use standard_testfile.
* gdb.mi/mi-watch-nonstop.exp: Use standard_testfile.
* gdb.mi/mi-watch.exp: Use standard_testfile.
* gdb.mi/mi2-amd64-entry-value.exp: Use standard_testfile.
* gdb.mi/mi2-basics.exp: Use standard_testfile.
* gdb.mi/mi2-break.exp: Use standard_testfile.
* gdb.mi/mi2-cli.exp: Use standard_testfile.
* gdb.mi/mi2-console.exp: Use standard_testfile.
* gdb.mi/mi2-disassemble.exp: Use standard_testfile.
* gdb.mi/mi2-eval.exp: Use standard_testfile.
* gdb.mi/mi2-file.exp: Use standard_testfile.
* gdb.mi/mi2-pthreads.exp: Use standard_testfile.
* gdb.mi/mi2-read-memory.exp: Use standard_testfile.
* gdb.mi/mi2-regs.exp: Use standard_testfile.
* gdb.mi/mi2-return.exp: Use standard_testfile.
* gdb.mi/mi2-simplerun.exp: Use standard_testfile.
* gdb.mi/mi2-stack.exp: Use standard_testfile.
* gdb.mi/mi2-stepi.exp: Use standard_testfile.
* gdb.mi/mi2-syn-frame.exp: Use standard_testfile.
* gdb.mi/mi2-until.exp: Use standard_testfile.
* gdb.mi/mi2-var-block.exp: Use standard_testfile.
* gdb.mi/mi2-var-child.exp: Use standard_testfile.
* gdb.mi/mi2-var-cmd.exp: Use standard_testfile.
* gdb.mi/mi2-var-display.exp: Use standard_testfile.
* gdb.mi/mi2-watch.exp: Use standard_testfile.
|
|
2012-04-14 Anton Gorenkov <xgsa@yandex.ru>
PR mi/13393
* gdb.texinfo (Print Settings): Extend the description for "set print
object".
(GDB/MI Variable Objects): Extend the description for -var-create and
-var-list-children.
gdb/testsuite/ChangeLog:
2012-04-14 Anton Gorenkov <xgsa@yandex.ru>
PR mi/13393
* gdb.mi/mi-var-rtti.cc: New file.
* gdb.mi/mi-var-rtti.exp: New file.
* lib/mi-support.exp (mi_varobj_update_with_child_type_change): New
function.
(mi_varobj_update_with_type_change): updated to avoid code duplication.
gdb/ChangeLog:
2012-04-14 Anton Gorenkov <xgsa@yandex.ru>
PR mi/13393
* value.c (value_actual_type): New function.
* value.h (value_actual_type): New declaration.
* varobj.c (update_type_if_necessary): New function.
(varobj_create): Call value_actual_type instead of
value_type.
(install_dynamic_child): distinct changed and type changed MI variable
objects.
(update_dynamic_varobj_children): Updated for install_dynamic_child
change. All callers updated.
(varobj_update): Support for MI variable object type change if
the value changed and RTTI is used to determine the type.
(create_child_with_value): Call value_actual_type instead of
value_type.
(adjust_value_for_child_access): Extended with a new parameter which
specify whether the given value should be casted to enclosing type.
All callers updated.
|
