aboutsummaryrefslogtreecommitdiff
path: root/gdb/testsuite/gdb.mi/mi-cli.exp
AgeCommit message (Collapse)AuthorFilesLines
2017-01-01update copyright year range in GDB filesJoel Brobecker1-1/+1
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-12-23Fix more cases of improper test namesLuis Machado1-1/+1
I noticed more occurrences of improper test names. The rather mechanical, tedious and large patch below addresses, hopefully, most of the leftover cases. As usual, another pair of eyes is welcome to check if missed something or did an invalid substitution. This patch also fixes the prepare_for_testing calls to pass proper test names. gdb/testsuite/ChangeLog: 2016-12-23 Luis Machado <lgustavo@codesourcery.com> Fix test names for the following files: * gdb.ada/exec_changed.exp * gdb.ada/info_types.exp * gdb.arch/aarch64-atomic-inst.exp * gdb.arch/aarch64-fp.exp * gdb.arch/altivec-abi.exp * gdb.arch/altivec-regs.exp * gdb.arch/amd64-byte.exp * gdb.arch/amd64-disp-step.exp * gdb.arch/amd64-dword.exp * gdb.arch/amd64-entry-value-inline.exp * gdb.arch/amd64-entry-value-param.exp * gdb.arch/amd64-entry-value-paramref.exp * gdb.arch/amd64-entry-value.exp * gdb.arch/amd64-i386-address.exp * gdb.arch/amd64-invalid-stack-middle.exp * gdb.arch/amd64-invalid-stack-top.exp * gdb.arch/amd64-optimout-repeat.exp * gdb.arch/amd64-prologue-skip.exp * gdb.arch/amd64-prologue-xmm.exp * gdb.arch/amd64-stap-special-operands.exp * gdb.arch/amd64-stap-wrong-subexp.exp * gdb.arch/amd64-tailcall-cxx.exp * gdb.arch/amd64-tailcall-noret.exp * gdb.arch/amd64-tailcall-ret.exp * gdb.arch/amd64-tailcall-self.exp * gdb.arch/amd64-word.exp * gdb.arch/arm-bl-branch-dest.exp * gdb.arch/arm-disp-step.exp * gdb.arch/arm-neon.exp * gdb.arch/arm-single-step-kernel-helper.exp * gdb.arch/avr-flash-qualifier.exp * gdb.arch/disp-step-insn-reloc.exp * gdb.arch/e500-abi.exp * gdb.arch/e500-regs.exp * gdb.arch/ftrace-insn-reloc.exp * gdb.arch/i386-avx512.exp * gdb.arch/i386-bp_permanent.exp * gdb.arch/i386-byte.exp * gdb.arch/i386-cfi-notcurrent.exp * gdb.arch/i386-disp-step.exp * gdb.arch/i386-dr3-watch.exp * gdb.arch/i386-float.exp * gdb.arch/i386-gnu-cfi.exp * gdb.arch/i386-mpx-map.exp * gdb.arch/i386-mpx-sigsegv.exp * gdb.arch/i386-mpx-simple_segv.exp * gdb.arch/i386-mpx.exp * gdb.arch/i386-permbkpt.exp * gdb.arch/i386-prologue.exp * gdb.arch/i386-signal.exp * gdb.arch/i386-size-overlap.exp * gdb.arch/i386-unwind.exp * gdb.arch/i386-word.exp * gdb.arch/mips-fcr.exp * gdb.arch/powerpc-d128-regs.exp * gdb.arch/powerpc-stackless.exp * gdb.arch/ppc64-atomic-inst.exp * gdb.arch/s390-stackless.exp * gdb.arch/s390-tdbregs.exp * gdb.arch/s390-vregs.exp * gdb.arch/sparc-sysstep.exp * gdb.arch/thumb-bx-pc.exp * gdb.arch/thumb-singlestep.exp * gdb.arch/thumb2-it.exp * gdb.arch/vsx-regs.exp * gdb.asm/asm-source.exp * gdb.base/a2-run.exp * gdb.base/advance.exp * gdb.base/all-bin.exp * gdb.base/anon.exp * gdb.base/args.exp * gdb.base/arithmet.exp * gdb.base/async-shell.exp * gdb.base/async.exp * gdb.base/attach-pie-noexec.exp * gdb.base/attach-twice.exp * gdb.base/auto-load.exp * gdb.base/bang.exp * gdb.base/bitfields.exp * gdb.base/break-always.exp * gdb.base/break-caller-line.exp * gdb.base/break-entry.exp * gdb.base/break-inline.exp * gdb.base/break-on-linker-gcd-function.exp * gdb.base/break-probes.exp * gdb.base/break.exp * gdb.base/breakpoint-shadow.exp * gdb.base/call-ar-st.exp * gdb.base/call-sc.exp * gdb.base/call-signal-resume.exp * gdb.base/call-strs.exp * gdb.base/callfuncs.exp * gdb.base/catch-fork-static.exp * gdb.base/catch-gdb-caused-signals.exp * gdb.base/catch-load.exp * gdb.base/catch-signal-fork.exp * gdb.base/catch-signal.exp * gdb.base/catch-syscall.exp * gdb.base/charset.exp * gdb.base/checkpoint.exp * gdb.base/chng-syms.exp * gdb.base/code-expr.exp * gdb.base/code_elim.exp * gdb.base/commands.exp * gdb.base/completion.exp * gdb.base/complex.exp * gdb.base/cond-expr.exp * gdb.base/condbreak.exp * gdb.base/consecutive.exp * gdb.base/continue-all-already-running.exp * gdb.base/coredump-filter.exp * gdb.base/corefile.exp * gdb.base/dbx.exp * gdb.base/debug-expr.exp * gdb.base/define.exp * gdb.base/del.exp * gdb.base/disabled-location.exp * gdb.base/disasm-end-cu.exp * gdb.base/disasm-optim.exp * gdb.base/display.exp * gdb.base/duplicate-bp.exp * gdb.base/ena-dis-br.exp * gdb.base/ending-run.exp * gdb.base/enumval.exp * gdb.base/environ.exp * gdb.base/eu-strip-infcall.exp * gdb.base/eval-avoid-side-effects.exp * gdb.base/eval-skip.exp * gdb.base/exitsignal.exp * gdb.base/expand-psymtabs.exp * gdb.base/filesym.exp * gdb.base/find-unmapped.exp * gdb.base/finish.exp * gdb.base/float.exp * gdb.base/foll-exec-mode.exp * gdb.base/foll-exec.exp * gdb.base/foll-fork.exp * gdb.base/fortran-sym-case.exp * gdb.base/freebpcmd.exp * gdb.base/func-ptr.exp * gdb.base/func-ptrs.exp * gdb.base/funcargs.exp * gdb.base/gcore-buffer-overflow.exp * gdb.base/gcore-relro-pie.exp * gdb.base/gcore-relro.exp * gdb.base/gcore.exp * gdb.base/gdb1090.exp * gdb.base/gdb11530.exp * gdb.base/gdb11531.exp * gdb.base/gdb1821.exp * gdb.base/gdbindex-stabs.exp * gdb.base/gdbvars.exp * gdb.base/hbreak.exp * gdb.base/hbreak2.exp * gdb.base/included.exp * gdb.base/infcall-input.exp * gdb.base/inferior-died.exp * gdb.base/infnan.exp * gdb.base/info-macros.exp * gdb.base/info-os.exp * gdb.base/info-proc.exp * gdb.base/info-shared.exp * gdb.base/info-target.exp * gdb.base/infoline.exp * gdb.base/interp.exp * gdb.base/interrupt.exp * gdb.base/jit-reader.exp * gdb.base/jit-simple.exp * gdb.base/kill-after-signal.exp * gdb.base/kill-detach-inferiors-cmd.exp * gdb.base/label.exp * gdb.base/langs.exp * gdb.base/ldbl_e308.exp * gdb.base/line-symtabs.exp * gdb.base/linespecs.exp * gdb.base/list.exp * gdb.base/long_long.exp * gdb.base/longest-types.exp * gdb.base/maint.exp * gdb.base/max-value-size.exp * gdb.base/memattr.exp * gdb.base/mips_pro.exp * gdb.base/morestack.exp * gdb.base/moribund-step.exp * gdb.base/multi-forks.exp * gdb.base/nested-addr.exp * gdb.base/nextoverexit.exp * gdb.base/noreturn-finish.exp * gdb.base/noreturn-return.exp * gdb.base/nostdlib.exp * gdb.base/offsets.exp * gdb.base/opaque.exp * gdb.base/pc-fp.exp * gdb.base/permissions.exp * gdb.base/print-symbol-loading.exp * gdb.base/prologue-include.exp * gdb.base/psymtab.exp * gdb.base/ptype.exp * gdb.base/random-signal.exp * gdb.base/randomize.exp * gdb.base/range-stepping.exp * gdb.base/readline-ask.exp * gdb.base/recpar.exp * gdb.base/recurse.exp * gdb.base/relational.exp * gdb.base/restore.exp * gdb.base/return-nodebug.exp * gdb.base/return.exp * gdb.base/run-after-attach.exp * gdb.base/save-bp.exp * gdb.base/scope.exp * gdb.base/sect-cmd.exp * gdb.base/set-lang-auto.exp * gdb.base/set-noassign.exp * gdb.base/setvar.exp * gdb.base/sigall.exp * gdb.base/sigbpt.exp * gdb.base/siginfo-addr.exp * gdb.base/siginfo-infcall.exp * gdb.base/siginfo-obj.exp * gdb.base/siginfo.exp * gdb.base/signals-state-child.exp * gdb.base/signest.exp * gdb.base/sigstep.exp * gdb.base/sizeof.exp * gdb.base/skip.exp * gdb.base/solib-corrupted.exp * gdb.base/solib-nodir.exp * gdb.base/solib-search.exp * gdb.base/stack-checking.exp * gdb.base/stale-infcall.exp * gdb.base/stap-probe.exp * gdb.base/start.exp * gdb.base/step-break.exp * gdb.base/step-bt.exp * gdb.base/step-line.exp * gdb.base/step-over-exit.exp * gdb.base/step-over-syscall.exp * gdb.base/step-resume-infcall.exp * gdb.base/step-test.exp * gdb.base/store.exp * gdb.base/structs3.exp * gdb.base/sym-file.exp * gdb.base/symbol-without-target_section.exp * gdb.base/term.exp * gdb.base/testenv.exp * gdb.base/ui-redirect.exp * gdb.base/until.exp * gdb.base/unwindonsignal.exp * gdb.base/value-double-free.exp * gdb.base/vla-datatypes.exp * gdb.base/vla-ptr.exp * gdb.base/vla-sideeffect.exp * gdb.base/volatile.exp * gdb.base/watch-cond-infcall.exp * gdb.base/watch-cond.exp * gdb.base/watch-non-mem.exp * gdb.base/watch-read.exp * gdb.base/watch-vfork.exp * gdb.base/watchpoint-cond-gone.exp * gdb.base/watchpoint-delete.exp * gdb.base/watchpoint-hw-hit-once.exp * gdb.base/watchpoint-hw.exp * gdb.base/watchpoint-stops-at-right-insn.exp * gdb.base/watchpoints.exp * gdb.base/wchar.exp * gdb.base/whatis-exp.exp * gdb.btrace/buffer-size.exp * gdb.btrace/data.exp * gdb.btrace/delta.exp * gdb.btrace/dlopen.exp * gdb.btrace/enable.exp * gdb.btrace/exception.exp * gdb.btrace/function_call_history.exp * gdb.btrace/gcore.exp * gdb.btrace/instruction_history.exp * gdb.btrace/nohist.exp * gdb.btrace/reconnect.exp * gdb.btrace/record_goto-step.exp * gdb.btrace/record_goto.exp * gdb.btrace/rn-dl-bind.exp * gdb.btrace/segv.exp * gdb.btrace/step.exp * gdb.btrace/stepi.exp * gdb.btrace/tailcall-only.exp * gdb.btrace/tailcall.exp * gdb.btrace/tsx.exp * gdb.btrace/unknown_functions.exp * gdb.btrace/vdso.exp * gdb.compile/compile-ifunc.exp * gdb.compile/compile-ops.exp * gdb.compile/compile-print.exp * gdb.compile/compile-setjmp.exp * gdb.cp/abstract-origin.exp * gdb.cp/ambiguous.exp * gdb.cp/annota2.exp * gdb.cp/annota3.exp * gdb.cp/anon-ns.exp * gdb.cp/anon-struct.exp * gdb.cp/anon-union.exp * gdb.cp/arg-reference.exp * gdb.cp/baseenum.exp * gdb.cp/bool.exp * gdb.cp/breakpoint.exp * gdb.cp/bs15503.exp * gdb.cp/call-c.exp * gdb.cp/casts.exp * gdb.cp/chained-calls.exp * gdb.cp/class2.exp * gdb.cp/classes.exp * gdb.cp/cmpd-minsyms.exp * gdb.cp/converts.exp * gdb.cp/cp-relocate.exp * gdb.cp/cpcompletion.exp * gdb.cp/cpexprs.exp * gdb.cp/cplabel.exp * gdb.cp/cplusfuncs.exp * gdb.cp/cpsizeof.exp * gdb.cp/ctti.exp * gdb.cp/derivation.exp * gdb.cp/destrprint.exp * gdb.cp/dispcxx.exp * gdb.cp/enum-class.exp * gdb.cp/exception.exp * gdb.cp/exceptprint.exp * gdb.cp/expand-psymtabs-cxx.exp * gdb.cp/expand-sals.exp * gdb.cp/extern-c.exp * gdb.cp/filename.exp * gdb.cp/formatted-ref.exp * gdb.cp/fpointer.exp * gdb.cp/gdb1355.exp * gdb.cp/gdb2495.exp * gdb.cp/hang.exp * gdb.cp/impl-this.exp * gdb.cp/infcall-dlopen.exp * gdb.cp/inherit.exp * gdb.cp/iostream.exp * gdb.cp/koenig.exp * gdb.cp/local.exp * gdb.cp/m-data.exp * gdb.cp/m-static.exp * gdb.cp/mb-ctor.exp * gdb.cp/mb-inline.exp * gdb.cp/mb-templates.exp * gdb.cp/member-name.exp * gdb.cp/member-ptr.exp * gdb.cp/meth-typedefs.exp * gdb.cp/method.exp * gdb.cp/method2.exp * gdb.cp/minsym-fallback.exp * gdb.cp/misc.exp * gdb.cp/namelessclass.exp * gdb.cp/namespace-enum.exp * gdb.cp/namespace-nested-import.exp * gdb.cp/namespace.exp * gdb.cp/nextoverthrow.exp * gdb.cp/no-dmgl-verbose.exp * gdb.cp/non-trivial-retval.exp * gdb.cp/noparam.exp * gdb.cp/nsdecl.exp * gdb.cp/nsimport.exp * gdb.cp/nsnested.exp * gdb.cp/nsnoimports.exp * gdb.cp/nsrecurs.exp * gdb.cp/nsstress.exp * gdb.cp/nsusing.exp * gdb.cp/operator.exp * gdb.cp/oranking.exp * gdb.cp/overload-const.exp * gdb.cp/overload.exp * gdb.cp/ovldbreak.exp * gdb.cp/ovsrch.exp * gdb.cp/paren-type.exp * gdb.cp/parse-lang.exp * gdb.cp/pass-by-ref.exp * gdb.cp/pr-1023.exp * gdb.cp/pr-1210.exp * gdb.cp/pr-574.exp * gdb.cp/pr10687.exp * gdb.cp/pr12028.exp * gdb.cp/pr17132.exp * gdb.cp/pr17494.exp * gdb.cp/pr9067.exp * gdb.cp/pr9167.exp * gdb.cp/pr9631.exp * gdb.cp/printmethod.exp * gdb.cp/psmang.exp * gdb.cp/psymtab-parameter.exp * gdb.cp/ptype-cv-cp.exp * gdb.cp/ptype-flags.exp * gdb.cp/re-set-overloaded.exp * gdb.cp/ref-types.exp * gdb.cp/rtti.exp * gdb.cp/scope-err.exp * gdb.cp/shadow.exp * gdb.cp/smartp.exp * gdb.cp/static-method.exp * gdb.cp/static-print-quit.exp * gdb.cp/temargs.exp * gdb.cp/templates.exp * gdb.cp/try_catch.exp * gdb.cp/typedef-operator.exp * gdb.cp/typeid.exp * gdb.cp/userdef.exp * gdb.cp/using-crash.exp * gdb.cp/var-tag.exp * gdb.cp/virtbase.exp * gdb.cp/virtfunc.exp * gdb.cp/virtfunc2.exp * gdb.cp/vla-cxx.exp * gdb.disasm/t01_mov.exp * gdb.disasm/t02_mova.exp * gdb.disasm/t03_add.exp * gdb.disasm/t04_sub.exp * gdb.disasm/t05_cmp.exp * gdb.disasm/t06_ari2.exp * gdb.disasm/t07_ari3.exp * gdb.disasm/t08_or.exp * gdb.disasm/t09_xor.exp * gdb.disasm/t10_and.exp * gdb.disasm/t11_logs.exp * gdb.disasm/t12_bit.exp * gdb.disasm/t13_otr.exp * gdb.dlang/circular.exp * gdb.dwarf2/arr-stride.exp * gdb.dwarf2/arr-subrange.exp * gdb.dwarf2/atomic-type.exp * gdb.dwarf2/bad-regnum.exp * gdb.dwarf2/bitfield-parent-optimized-out.exp * gdb.dwarf2/callframecfa.exp * gdb.dwarf2/clztest.exp * gdb.dwarf2/corrupt.exp * gdb.dwarf2/data-loc.exp * gdb.dwarf2/dup-psym.exp * gdb.dwarf2/dw2-anon-mptr.exp * gdb.dwarf2/dw2-anonymous-func.exp * gdb.dwarf2/dw2-bad-mips-linkage-name.exp * gdb.dwarf2/dw2-bad-unresolved.exp * gdb.dwarf2/dw2-basic.exp * gdb.dwarf2/dw2-canonicalize-type.exp * gdb.dwarf2/dw2-case-insensitive.exp * gdb.dwarf2/dw2-common-block.exp * gdb.dwarf2/dw2-compdir-oldgcc.exp * gdb.dwarf2/dw2-compressed.exp * gdb.dwarf2/dw2-const.exp * gdb.dwarf2/dw2-cp-infcall-ref-static.exp * gdb.dwarf2/dw2-cu-size.exp * gdb.dwarf2/dw2-dup-frame.exp * gdb.dwarf2/dw2-entry-value.exp * gdb.dwarf2/dw2-icycle.exp * gdb.dwarf2/dw2-ifort-parameter.exp * gdb.dwarf2/dw2-inline-break.exp * gdb.dwarf2/dw2-inline-param.exp * gdb.dwarf2/dw2-intercu.exp * gdb.dwarf2/dw2-intermix.exp * gdb.dwarf2/dw2-lexical-block-bare.exp * gdb.dwarf2/dw2-linkage-name-trust.exp * gdb.dwarf2/dw2-minsym-in-cu.exp * gdb.dwarf2/dw2-noloc.exp * gdb.dwarf2/dw2-op-call.exp * gdb.dwarf2/dw2-op-out-param.exp * gdb.dwarf2/dw2-opt-structptr.exp * gdb.dwarf2/dw2-param-error.exp * gdb.dwarf2/dw2-producer.exp * gdb.dwarf2/dw2-ranges-base.exp * gdb.dwarf2/dw2-ref-missing-frame.exp * gdb.dwarf2/dw2-reg-undefined.exp * gdb.dwarf2/dw2-regno-invalid.exp * gdb.dwarf2/dw2-restore.exp * gdb.dwarf2/dw2-restrict.exp * gdb.dwarf2/dw2-single-line-discriminators.exp * gdb.dwarf2/dw2-strp.exp * gdb.dwarf2/dw2-undefined-ret-addr.exp * gdb.dwarf2/dw2-unresolved.exp * gdb.dwarf2/dw2-var-zero-addr.exp * gdb.dwarf2/dw4-sig-types.exp * gdb.dwarf2/dwz.exp * gdb.dwarf2/dynarr-ptr.exp * gdb.dwarf2/enum-type.exp * gdb.dwarf2/gdb-index.exp * gdb.dwarf2/implptr-64bit.exp * gdb.dwarf2/implptr-optimized-out.exp * gdb.dwarf2/implptr.exp * gdb.dwarf2/implref-array.exp * gdb.dwarf2/implref-const.exp * gdb.dwarf2/implref-global.exp * gdb.dwarf2/implref-struct.exp * gdb.dwarf2/mac-fileno.exp * gdb.dwarf2/main-subprogram.exp * gdb.dwarf2/member-ptr-forwardref.exp * gdb.dwarf2/method-ptr.exp * gdb.dwarf2/missing-sig-type.exp * gdb.dwarf2/nonvar-access.exp * gdb.dwarf2/opaque-type-lookup.exp * gdb.dwarf2/pieces-optimized-out.exp * gdb.dwarf2/pieces.exp * gdb.dwarf2/pr10770.exp * gdb.dwarf2/pr13961.exp * gdb.dwarf2/staticvirtual.exp * gdb.dwarf2/subrange.exp * gdb.dwarf2/symtab-producer.exp * gdb.dwarf2/trace-crash.exp * gdb.dwarf2/typeddwarf.exp * gdb.dwarf2/valop.exp * gdb.dwarf2/watch-notconst.exp * gdb.fortran/array-element.exp * gdb.fortran/charset.exp * gdb.fortran/common-block.exp * gdb.fortran/complex.exp * gdb.fortran/derived-type-function.exp * gdb.fortran/derived-type.exp * gdb.fortran/logical.exp * gdb.fortran/module.exp * gdb.fortran/multi-dim.exp * gdb.fortran/nested-funcs.exp * gdb.fortran/print-formatted.exp * gdb.fortran/subarray.exp * gdb.fortran/vla-alloc-assoc.exp * gdb.fortran/vla-datatypes.exp * gdb.fortran/vla-history.exp * gdb.fortran/vla-ptr-info.exp * gdb.fortran/vla-ptype-sub.exp * gdb.fortran/vla-ptype.exp * gdb.fortran/vla-sizeof.exp * gdb.fortran/vla-type.exp * gdb.fortran/vla-value-sub-arbitrary.exp * gdb.fortran/vla-value-sub-finish.exp * gdb.fortran/vla-value-sub.exp * gdb.fortran/vla-value.exp * gdb.fortran/whatis_type.exp * gdb.go/chan.exp * gdb.go/handcall.exp * gdb.go/hello.exp * gdb.go/integers.exp * gdb.go/methods.exp * gdb.go/package.exp * gdb.go/strings.exp * gdb.go/types.exp * gdb.go/unsafe.exp * gdb.guile/scm-arch.exp * gdb.guile/scm-block.exp * gdb.guile/scm-breakpoint.exp * gdb.guile/scm-cmd.exp * gdb.guile/scm-disasm.exp * gdb.guile/scm-equal.exp * gdb.guile/scm-frame-args.exp * gdb.guile/scm-frame-inline.exp * gdb.guile/scm-frame.exp * gdb.guile/scm-iterator.exp * gdb.guile/scm-math.exp * gdb.guile/scm-objfile.exp * gdb.guile/scm-ports.exp * gdb.guile/scm-symbol.exp * gdb.guile/scm-symtab.exp * gdb.guile/scm-value-cc.exp * gdb.guile/types-module.exp * gdb.linespec/break-ask.exp * gdb.linespec/cpexplicit.exp * gdb.linespec/explicit.exp * gdb.linespec/keywords.exp * gdb.linespec/linespec.exp * gdb.linespec/ls-dollar.exp * gdb.linespec/ls-errs.exp * gdb.linespec/skip-two.exp * gdb.linespec/thread.exp * gdb.mi/mi-async.exp * gdb.mi/mi-basics.exp * gdb.mi/mi-break.exp * gdb.mi/mi-catch-load.exp * gdb.mi/mi-cli.exp * gdb.mi/mi-cmd-param-changed.exp * gdb.mi/mi-console.exp * gdb.mi/mi-detach.exp * gdb.mi/mi-disassemble.exp * gdb.mi/mi-eval.exp * gdb.mi/mi-file-transfer.exp * gdb.mi/mi-file.exp * gdb.mi/mi-fill-memory.exp * gdb.mi/mi-inheritance-syntax-error.exp * gdb.mi/mi-linespec-err-cp.exp * gdb.mi/mi-logging.exp * gdb.mi/mi-memory-changed.exp * gdb.mi/mi-read-memory.exp * gdb.mi/mi-record-changed.exp * gdb.mi/mi-reg-undefined.exp * gdb.mi/mi-regs.exp * gdb.mi/mi-return.exp * gdb.mi/mi-reverse.exp * gdb.mi/mi-simplerun.exp * gdb.mi/mi-solib.exp * gdb.mi/mi-stack.exp * gdb.mi/mi-stepi.exp * gdb.mi/mi-syn-frame.exp * gdb.mi/mi-until.exp * gdb.mi/mi-var-block.exp * gdb.mi/mi-var-child.exp * gdb.mi/mi-var-cmd.exp * gdb.mi/mi-var-cp.exp * gdb.mi/mi-var-display.exp * gdb.mi/mi-var-invalidate.exp * gdb.mi/mi-var-list-children-invalid-grandchild.exp * gdb.mi/mi-vla-fortran.exp * gdb.mi/mi-watch.exp * gdb.mi/mi2-var-child.exp * gdb.mi/user-selected-context-sync.exp * gdb.modula2/unbounded-array.exp * gdb.multi/dummy-frame-restore.exp * gdb.multi/multi-arch-exec.exp * gdb.multi/multi-arch.exp * gdb.multi/tids.exp * gdb.multi/watchpoint-multi.exp * gdb.opencl/callfuncs.exp * gdb.opencl/convs_casts.exp * gdb.opencl/datatypes.exp * gdb.opencl/operators.exp * gdb.opencl/vec_comps.exp * gdb.opt/clobbered-registers-O2.exp * gdb.opt/inline-break.exp * gdb.opt/inline-bt.exp * gdb.opt/inline-cmds.exp * gdb.opt/inline-locals.exp * gdb.pascal/case-insensitive-symbols.exp * gdb.pascal/floats.exp * gdb.pascal/gdb11492.exp * gdb.python/lib-types.exp * gdb.python/py-arch.exp * gdb.python/py-as-string.exp * gdb.python/py-bad-printers.exp * gdb.python/py-block.exp * gdb.python/py-breakpoint-create-fail.exp * gdb.python/py-breakpoint.exp * gdb.python/py-caller-is.exp * gdb.python/py-cmd.exp * gdb.python/py-explore-cc.exp * gdb.python/py-explore.exp * gdb.python/py-finish-breakpoint.exp * gdb.python/py-finish-breakpoint2.exp * gdb.python/py-frame-args.exp * gdb.python/py-frame-inline.exp * gdb.python/py-frame.exp * gdb.python/py-framefilter-mi.exp * gdb.python/py-infthread.exp * gdb.python/py-lazy-string.exp * gdb.python/py-linetable.exp * gdb.python/py-mi-events.exp * gdb.python/py-mi-objfile.exp * gdb.python/py-mi.exp * gdb.python/py-objfile.exp * gdb.python/py-pp-integral.exp * gdb.python/py-pp-maint.exp * gdb.python/py-pp-re-notag.exp * gdb.python/py-pp-registration.exp * gdb.python/py-recurse-unwind.exp * gdb.python/py-strfns.exp * gdb.python/py-symbol.exp * gdb.python/py-symtab.exp * gdb.python/py-sync-interp.exp * gdb.python/py-typeprint.exp * gdb.python/py-unwind-maint.exp * gdb.python/py-unwind.exp * gdb.python/py-value-cc.exp * gdb.python/py-xmethods.exp * gdb.reverse/amd64-tailcall-reverse.exp * gdb.reverse/break-precsave.exp * gdb.reverse/break-reverse.exp * gdb.reverse/consecutive-precsave.exp * gdb.reverse/consecutive-reverse.exp * gdb.reverse/finish-precsave.exp * gdb.reverse/finish-reverse-bkpt.exp * gdb.reverse/finish-reverse.exp * gdb.reverse/fstatat-reverse.exp * gdb.reverse/getresuid-reverse.exp * gdb.reverse/i386-precsave.exp * gdb.reverse/i386-reverse.exp * gdb.reverse/i386-sse-reverse.exp * gdb.reverse/i387-env-reverse.exp * gdb.reverse/i387-stack-reverse.exp * gdb.reverse/insn-reverse.exp * gdb.reverse/machinestate-precsave.exp * gdb.reverse/machinestate.exp * gdb.reverse/next-reverse-bkpt-over-sr.exp * gdb.reverse/pipe-reverse.exp * gdb.reverse/readv-reverse.exp * gdb.reverse/recvmsg-reverse.exp * gdb.reverse/rerun-prec.exp * gdb.reverse/s390-mvcle.exp * gdb.reverse/step-precsave.exp * gdb.reverse/step-reverse.exp * gdb.reverse/time-reverse.exp * gdb.reverse/until-precsave.exp * gdb.reverse/until-reverse.exp * gdb.reverse/waitpid-reverse.exp * gdb.reverse/watch-precsave.exp * gdb.reverse/watch-reverse.exp * gdb.rust/generics.exp * gdb.rust/methods.exp * gdb.rust/modules.exp * gdb.rust/simple.exp * gdb.server/connect-with-no-symbol-file.exp * gdb.server/ext-attach.exp * gdb.server/ext-restart.exp * gdb.server/ext-wrapper.exp * gdb.server/file-transfer.exp * gdb.server/server-exec-info.exp * gdb.server/server-kill.exp * gdb.server/server-mon.exp * gdb.server/wrapper.exp * gdb.stabs/exclfwd.exp * gdb.stabs/gdb11479.exp * gdb.threads/clone-new-thread-event.exp * gdb.threads/corethreads.exp * gdb.threads/current-lwp-dead.exp * gdb.threads/dlopen-libpthread.exp * gdb.threads/gcore-thread.exp * gdb.threads/sigstep-threads.exp * gdb.threads/watchpoint-fork.exp * gdb.trace/actions-changed.exp * gdb.trace/backtrace.exp * gdb.trace/change-loc.exp * gdb.trace/circ.exp * gdb.trace/collection.exp * gdb.trace/disconnected-tracing.exp * gdb.trace/ftrace.exp * gdb.trace/mi-trace-frame-collected.exp * gdb.trace/mi-trace-unavailable.exp * gdb.trace/mi-traceframe-changed.exp * gdb.trace/mi-tsv-changed.exp * gdb.trace/no-attach-trace.exp * gdb.trace/passc-dyn.exp * gdb.trace/qtro.exp * gdb.trace/range-stepping.exp * gdb.trace/read-memory.exp * gdb.trace/save-trace.exp * gdb.trace/signal.exp * gdb.trace/status-stop.exp * gdb.trace/tfile.exp * gdb.trace/trace-break.exp * gdb.trace/trace-buffer-size.exp * gdb.trace/trace-condition.exp * gdb.trace/tracefile-pseudo-reg.exp * gdb.trace/tstatus.exp * gdb.trace/unavailable.exp * gdb.trace/while-dyn.exp * gdb.trace/while-stepping.exp
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-09-18Generalize breakpoint pattern in gdb.mi/mi-cli.exp.Sandra Loosemore1-1/+1
2015-09-18 Sandra Loosemore <sandra@codesourcery.com> gdb/testsuite/ * gdb.mi/mi-cli.exp: Don't require directory prefix in breakpoint filename pattern.
2015-09-09Replace "struct continuation" mechanism by something more extensiblePedro Alves1-0/+18
This adds an object oriented replacement for the "struct continuation" mechanism, and converts the stepping commands (step, next, stepi, nexti) and the "finish" commands to use it. It adds a new thread "class" (struct thread_fsm) that contains the necessary info and callbacks to manage the state machine of a thread's execution command. This allows getting rid of some hacks. E.g., in fetch_inferior_event and normal_stop we no longer need to know whether a thread is doing a multi-step (e.g., step N). This effectively makes the intermediate_continuations unused -- they'll be garbage collected in a separate patch. (They were never a proper abstraction, IMO. See how fetch_inferior_event needs to check step_multi before knowing whether to call INF_EXEC_CONTINUE or INF_EXEC_COMPLETE.) The target async vs !async uiout hacks in mi_on_normal_stop go away too. print_stop_event is no longer called from normal_stop. Instead it is now called from within each interpreter's normal_stop observer. This clears the path to make each interpreter print a stop event the way it sees fit. Currently we have some hacks in common code to differenciate CLI vs TUI vs MI around this area. The "finish" command's FSM class stores the return value plus that value's position in the value history, so that those can be printed to both MI and CLI's streams. This fixes the CLI "finish" command when run from MI -- it now also includes the function's return value in the CLI stream: (gdb) ~"callee3 (strarg=0x400730 \"A string argument.\") at src/gdb/testsuite/gdb.mi/basics.c:35\n" ~"35\t}\n" +~"Value returned is $1 = 0\n" *stopped,reason="function-finished",frame=...,gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0" -FAIL: gdb.mi/mi-cli.exp: CLI finish: check CLI output +PASS: gdb.mi/mi-cli.exp: CLI finish: check CLI output gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_OBS): Add thread-fsm.o. * breakpoint.c (handle_jit_event): Print debug output. (bpstat_what): Split event callback handling to ... (bpstat_run_callbacks): ... this new function. (momentary_bkpt_print_it): No longer handle bp_finish here. * breakpoint.h (bpstat_run_callbacks): Declare. * gdbthread.h (struct thread_info) <step_multi>: Delete field. <thread_fsm>: New field. (thread_cancel_execution_command): Declare. * infcmd.c: Include thread-fsm.h. (struct step_command_fsm): New. (step_command_fsm_ops): New global. (new_step_command_fsm, step_command_fsm_prepare): New functions. (step_1): Adjust to use step_command_fsm_prepare and prepare_one_step. (struct step_1_continuation_args): Delete. (step_1_continuation): Delete. (step_command_fsm_should_stop): New function. (step_once): Delete. (step_command_fsm_clean_up, step_command_fsm_async_reply_reason) (prepare_one_step): New function, based on step_once. (until_next_command): Remove step_multi reference. (struct return_value_info): New. (print_return_value): Rename to ... (print_return_value_1): ... this. New struct return_value_info parameter. Adjust. (print_return_value): Reimplement as wrapper around print_return_value_1. (struct finish_command_fsm): New. (finish_command_continuation): Delete. (finish_command_fsm_ops): New global. (new_finish_command_fsm, finish_command_fsm_should_stop): New functions. (finish_command_fsm_clean_up, finish_command_fsm_return_value): New. (finish_command_continuation_free_arg): Delete. (finish_command_fsm_async_reply_reason): New. (finish_backward, finish_forward): Change symbol parameter to a finish_command_fsm. Adjust. (finish_command): Create a finish_command_fsm. Adjust. * infrun.c: Include "thread-fsm.h". (clear_proceed_status_thread): Delete the thread's FSM. (infrun_thread_stop_requested_callback): Cancel the thread's execution command. (clean_up_just_stopped_threads_fsms): New function. (fetch_inferior_event): Handle the event_thread's should_stop method saying the command isn't done yet. (process_event_stop_test): Run breakpoint callbacks here. (print_stop_event): Rename to ... (print_stop_location): ... this. (restore_current_uiout_cleanup): New function. (print_stop_event): Reimplement. (normal_stop): No longer notify the end_stepping_range observers here handle "step N" nor "finish" here. No longer call print_stop_event here. * infrun.h (struct return_value_info): Forward declare. (print_return_value): Declare. (print_stop_event): Change prototype. * thread-fsm.c: New file. * thread-fsm.h: New file. * thread.c: Include "thread-fsm.h". (thread_cancel_execution_command): New function. (clear_thread_inferior_resources): Call it. * cli/cli-interp.c (cli_on_normal_stop): New function. (cli_interpreter_init): Install cli_on_normal_stop as normal_stop observer. * mi/mi-interp.c: Include "thread-fsm.h". (restore_current_uiout_cleanup): Delete. (mi_on_normal_stop): If the thread has an FSM associated, and it finished, ask it for the async-reply-reason to print. Always call print_stop_event here, regardless of the top-level interpreter. Check bpstat_what to tell whether an asynchronous breakpoint hit triggered. * tui/tui-interp.c (tui_on_normal_stop): New function. (tui_init): Install tui_on_normal_stop as normal_stop observer. gdb/testsuite/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * gdb.mi/mi-cli.exp: Add CLI finish tests.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-05-29PR gdb/13860 - Make MI sync vs async output (closer to) the same.Pedro Alves1-21/+2
Ignoring expected and desired differences like whether the prompt is output after *stoppped records, GDB MI output is still different in sync and async modes. In sync mode, when a CLI execution command is entered, the "reason" field is missing in the *stopped async record. And in async mode, for some events, like program exits, the corresponding CLI output is missing in the CLI channel. Vis, diff between sync vs async modes: run ^running *running,thread-id="1" (gdb) ... - ~"[Inferior 1 (process 15882) exited normally]\n" =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" si ... (gdb) ~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n" - *stopped,frame=...,thread-id="1",stopped-threads="all",core="0" + *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0" (gdb) In addition, in both cases, when a MI execution command is entered, and a breakpoint triggers, the event is sent to the console too. But some events like program exits have the CLI output missing in the CLI channel: -exec-run ^running *running,thread-id="1" (gdb) ... =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" We'll want to make background commands always possible by default. IOW, make target-async be the default. But, in order to do that, we'll need to emulate MI sync on top of an async target. That means we'll have yet another combination to care for in the testsuite. Rather than making the testsuite cope with all these differences, I thought it better to just fix GDB to always have the complete output, no matter whether it's in sync or async mode. This is all related to interpreter-exec, and the corresponding uiout switching. (Typing a CLI command directly in MI is shorthand for running it through -interpreter-exec console.) In sync mode, when a CLI command is active, normal_stop is called when the current interpreter and uiout are CLI's. So print_XXX_reason prints the stop reason to CLI uiout (only), and we don't show it in MI. In async mode the stop event is processed when we're back in the MI interpreter, so the stop reason is printed directly to the MI uiout. Fix this by making run control event printing roughly independent of whatever is the current interpreter or uiout. That is, move these prints to interpreter observers, that know whether to print or be quiet, and if printing, which uiout to print to. In the case of the console/tui interpreters, only print if the top interpreter. For MI, always print. Breakpoint hits / normal stops are already handled similarly -- MI has a normal_stop observer that prints the event to both MI and the CLI, though that could be cleaned up further in the direction of this patch. This also makes all of: (gdb) foo and (gdb) interpreter-exec MI "-exec-foo" and (gdb) -exec-foo and (gdb) -interpreter-exec console "foo" print as expected. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * cli/cli-interp.c: Include infrun.h and observer.h. (cli_uiout, cli_interp): New globals. (cli_on_signal_received, cli_on_end_stepping_range) (cli_on_signal_exited, cli_on_exited, cli_on_no_history): New functions. (cli_interpreter_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_cli_interp): Remove cli_interp local. * infrun.c (handle_inferior_event): Call the several stop reason observers instead of printing the stop reason directly. (end_stepping_range): New function. (print_end_stepping_range_reason, print_signal_exited_reason) (print_exited_reason, print_signal_received_reason) (print_no_history_reason): Make static, and add an uiout parameter. Print to that instead of to CURRENT_UIOUT. * infrun.h (print_end_stepping_range_reason) (print_signal_exited_reason, print_exited_reason) (print_signal_received_reason print_no_history_reason): New declarations. * mi/mi-common.h (struct mi_interp): Rename 'uiout' field to 'mi_uiout'. <cli_uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new uiout for CLI output. Install 'signal_received', 'end_stepping_range', 'signal_exited', 'exited' and 'no_history' observers. (find_mi_interpreter, mi_interp_data, mi_on_signal_received) (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited) (mi_on_no_history): New functions. (ui_out_free_cleanup): Delete function. (mi_on_normal_stop): Don't allocate a new uiout for CLI output, instead use the one already stored in the MI interpreter data. (mi_ui_out): Adjust. * tui/tui-interp.c: Include infrun.h and observer.h. (tui_interp): New global. (tui_on_signal_received, tui_on_end_stepping_range) (tui_on_signal_exited, tui_on_exited) (tui_on_no_history): New functions. (tui_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_tui_interp): Delete tui_interp local. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * observer.texi (signal_received, end_stepping_range) (signal_exited, exited, no_history): New observer subjects. gdb/testsuite/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop reason, even in sync mode.
2014-05-21PR gdb/13860: don't lose '-interpreter-exec console EXECUTION_COMMAND''s ↵Pedro Alves1-7/+45
output in async mode. The other part of PR gdb/13860 is about console execution commands in MI getting their output half lost. E.g., take the finish command, executed on a frontend's GDB console: sync: finish &"finish\n" ~"Run till exit from #0 usleep (useconds=10) at ../sysdeps/unix/sysv/linux/usleep.c:27\n" ^running *running,thread-id="1" (gdb) ~"0x00000000004004d7 in foo () at stepinf.c:6\n" ~"6\t usleep (10);\n" ~"Value returned is $1 = 0\n" *stopped,reason="function-finished",frame={addr="0x00000000004004d7",func="foo",args=[],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="6"},thread-id="1",stopped-threads="all",core="1" async: finish &"finish\n" ~"Run till exit from #0 usleep (useconds=10) at ../sysdeps/unix/sysv/linux/usleep.c:27\n" ^running *running,thread-id="1" (gdb) *stopped,reason="function-finished",frame={addr="0x00000000004004d7",func="foo",args=[],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="6"},gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0" Note how all the "Value returned" etc. output is missing in async mode. The same happens with e.g., catchpoints: =breakpoint-modified,bkpt={number="1",type="catchpoint",disp="keep",enabled="y",what="22016",times="1"} ~"\nCatchpoint " ~"1 (forked process 22016), 0x0000003791cbd8a6 in __libc_fork () at ../nptl/sysdeps/unix/sysv/linux/fork.c:131\n" ~"131\t pid = ARCH_FORK ();\n" *stopped,reason="fork",disp="keep",bkptno="1",newpid="22016",frame={addr="0x0000003791cbd8a6",func="__libc_fork",args=[],file="../nptl/sysdeps/unix/sysv/linux/fork.c",fullname="/usr/src/debug/glibc-2.14-394-g8f3b1ff/nptl/sysdeps/unix/sysv/linux/fork.c",line="131"},thread-id="1",stopped-threads="all",core="0" where all those ~ lines are missing in async mode, or just the "step" current line indication: s &"s\n" ^running *running,thread-id="all" (gdb) ~"13\t foo ();\n" *stopped,frame={addr="0x00000000004004ef",func="main",args=[{name="argc",value="1"},{name="argv",value="0x7fffffffdd78"}],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="13"},thread-id="1",stopped-threads="all",core="3" (gdb) Or in the case of the PRs example, the "Stopped due to shared library event" note: start &"start\n" ~"Temporary breakpoint 1 at 0x400608: file ../../../src/gdb/testsuite/gdb.mi/solib-main.c, line 21.\n" =breakpoint-created,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x0000000000400608",func="main",file="../../../src/gdb/testsuite/gdb.mi/solib-main.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.mi/solib-main.c",line="21",times="0",original-location="main"} ~"Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/solib-main \n" =thread-group-started,id="i1",pid="21990" =thread-created,id="1",group-id="i1" ^running *running,thread-id="all" (gdb) =library-loaded,id="/lib64/ld-linux-x86-64.so.2",target-name="/lib64/ld-linux-x86-64.so.2",host-name="/lib64/ld-linux-x86-64.so.2",symbols-loaded="0",thread-group="i1" ~"Stopped due to shared library event (no libraries added or removed)\n" *stopped,reason="solib-event",thread-id="1",stopped-threads="all",core="3" (gdb) IMO, if you're typing execution commands in a frontend's console, you expect to see their output. Indeed it's what you get in sync mode. I think async mode should do the same. Deciding what to mirror to the console wrt to breakpoints and random stops gets messy real fast. E.g., say "s" trips on a breakpoint. We'd clearly want to mirror the event to the console in this case. But what about more complicated cases like "s&; thread n; s&", and one of those steps spawning a new thread, and that thread hitting a breakpoint? It's impossible in general to track whether the thread had any relation to the commands that had been executed. So I think we should just simplify and always mirror breakpoints and random events to the console. Notes: - mi->out is the same as gdb_stdout when MI is the current interpreter. I think that referring to that directly is cleaner. An earlier revision of this patch made the changes that are now done in mi_on_normal_stop directly in infrun.c:normal_stop, and so not having an obvious place to put the new uiout by then, and not wanting to abuse CLI's uiout, I made a temporary uiout when necessary. - Hopefuly the rest of the patch is more or less obvious given the comments added. Tested on x86_64 Fedora 20, no regressions. 2014-05-21 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdbthread.h (struct thread_control_state): New field `command_interp'. * infrun.c (follow_fork): Copy the new thread control field to the child fork thread. (clear_proceed_status_thread): Clear the new thread control field. (proceed): Set the new thread control field. * interps.h (command_interp): Declare. * interps.c (command_interpreter): New global. (command_interp): New function. (interp_exec): Set `command_interpreter' while here. * cli-out.c (cli_uiout_dtor): New function. (cli_ui_out_impl): Install it. * mi/mi-interp.c: Include cli-out.h. (mi_cmd_interpreter_exec): Add comment. (restore_current_uiout_cleanup): New function. (ui_out_free_cleanup): New function. (mi_on_normal_stop): If finishing an execution command started by a CLI command, or any kind of breakpoint-like event triggered, print the stop event to the output (CLI) stream. * mi/mi-out.c (mi_ui_out_impl): Install NULL `dtor' handler. 2014-05-21 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp (line_callee4_next_step): New global. (top level): Test that output related to execution commands is sent to the console with CLI commands, but not with MI commands. Test that breakpoint events are always mirrored to the console. Also expect the new source line to be output after a "next" in async mode too. Make it a pass/fail test. * gdb.mi/mi-solib.exp: Test that the CLI solib event note is output. * lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure.
2014-05-21PR gdb/13860: make -interpreter-exec console "list" behave more like "list".Pedro Alves1-0/+20
I noticed that "list" behaves differently in CLI vs MI. Particularly: $ ./gdb -nx -q ./testsuite/gdb.mi/mi-cli Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli...done. (gdb) start Temporary breakpoint 1 at 0x40054d: file ../../../src/gdb/testsuite/gdb.mi/basics.c, line 62. Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli Temporary breakpoint 1, main () at ../../../src/gdb/testsuite/gdb.mi/basics.c:62 62 callee1 (2, "A string argument.", 3.5); (gdb) list 57 { 58 } 59 60 main () 61 { 62 callee1 (2, "A string argument.", 3.5); 63 callee1 (2, "A string argument.", 3.5); 64 65 do_nothing (); /* Hello, World! */ 66 (gdb) Note the list started at line 57. IOW, the program stopped at line 62, and GDB centered the list on that. compare with: $ ./gdb -nx -q ./testsuite/gdb.mi/mi-cli -i=mi =thread-group-added,id="i1" ~"Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli..." ~"done.\n" (gdb) start &"start\n" ... ~"\nTemporary breakpoint " ~"1, main () at ../../../src/gdb/testsuite/gdb.mi/basics.c:62\n" ~"62\t callee1 (2, \"A string argument.\", 3.5);\n" *stopped,reason="breakpoint-hit",disp="del",bkptno="1",frame={addr="0x000000000040054d",func="main",args=[],file="../../../src/gdb/testsuite/gdb.mi/basics.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.mi/basics.c",line="62"},thread-id="1",stopped-threads="all",core="0" =breakpoint-deleted,id="1" (gdb) -interpreter-exec console list ~"62\t callee1 (2, \"A string argument.\", 3.5);\n" ~"63\t callee1 (2, \"A string argument.\", 3.5);\n" ~"64\t\n" ~"65\t do_nothing (); /* Hello, World! */\n" ~"66\t\n" ~"67\t callme (1);\n" ~"68\t callme (2);\n" ~"69\t\n" ~"70\t return 0;\n" ~"71\t}\n" ^done (gdb) Here the list starts at line 62, where the program was stopped. This happens because print_stack_frame, called from both normal_stop and mi_on_normal_stop, is the function responsible for setting the current sal from the selected frame, overrides the PRINT_WHAT argument, and only after that does it decide whether to center the current sal line or not, based on the overridden value, and it will always decide false. (The print_stack_frame call in mi_on_normal_stop is a little different from the call in normal_stop, in that it is an unconditional SRC_AND_LOC call. A future patch will make those uniform.) A previous version of this patch made MI uniform with CLI here, by making print_stack_frame also center when MI is active. That changed the output of a "list" command in mi-cli.exp, to expect line 57 instead of 62, as per the example above. However, looking deeper, that list in question is the first "list" after the program stops, and right after the stop, before the "list", the test did "set listsize 1". Let's try the same thing with the CLI: (gdb) start 62 callee1 (2, "A string argument.", 3.5); (gdb) set listsize 1 (gdb) list 57 { Huh, that's unexpected. Why the 57? It's because print_stack_frame, called in reaction to the breakpoint stop, expecting the next "list" to show 10 lines (the listsize at the time) around line 62, sets the lines listed range to 57-67 (62 +/- 5). If the user changes the listsize before "list", why would we still show that range? Looks bogus to me. So the fix for this whole issue should be delay trying to center the listing to until actually listing, so that the correct listsize can be taken into account. This makes MI and CLI uniform too, as it deletes the center code from print_stack_frame. A series of tests are added to list.exp to cover this. mi-cli.exp was after all correct all along, but it now gains an additional test that lists lines with listsize 10, to ensure the centering is consistent with CLI's. One related Python test changed related output -- it's a test that prints the line number after stopping for a breakpoint, similar to the new list.exp tests. Previously we'd print the stop line minus 5 (due to the premature centering), now we print the stop line. I think that's a good change. Tested on x86_64 Fedora 20. gdb/ 2014-05-21 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (list_command): Handle the first "list" after the current source line having changed. * frame.h (set_current_sal_from_frame): Remove 'center' parameter. * infrun.c (normal_stop): Adjust call to set_current_sal_from_frame. * source.c (clear_lines_listed_range): New function. (set_current_source_symtab_and_line, identify_source_line): Clear the lines listed range. (line_info): Handle the first "info line" after the current source line having changed. * stack.c (print_stack_frame): Remove center handling. (set_current_sal_from_frame): Remove 'center' parameter. Don't center sal.line. gdb/testsuite/ 2014-05-21 Pedro Alves <palves@redhat.com> * gdb.base/list.exp (build_pattern, test_list): New procedures. Use them to test variations of "list" after reaching a breakpoint. * gdb.mi/mi-cli.exp (line_main_callme_2): New global. Test "list" with listsize 10 after reaching a breakpoint. * gdb.python/python.exp (decode_line current location line number): Adjust expected line number.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker1-1/+1
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-10-14gdb/testsuite/Yao Qi1-0/+204
* gdb.mi/mi2-cli.exp: Move to mi-cli.exp. * gdb.mi/mi-cli.exp: New. * gdb.mi/mi2-basics.exp: Remove. * gdb.mi/mi2-break.exp: Remove. * gdb.mi/mi2-console.exp: Remove. * gdb.mi/mi2-disassemble.exp: Remove. * gdb.mi/mi2-eval.exp: Remove. * gdb.mi/mi2-file.exp: Remove. * gdb.mi/mi2-hack-cli.exp: Remove. * gdb.mi/mi2-pthreads.exp: Remove. * gdb.mi/mi2-read-memory.exp: Remove. * gdb.mi/mi2-regs.exp: Remove. * gdb.mi/mi2-return.exp: Remove. * gdb.mi/mi2-simplerun.exp: Remove. * gdb.mi/mi2-stack.exp: Remove. * gdb.mi/mi2-stepi.exp: Remove. * gdb.mi/mi2-syn-frame.exp: Remove. * gdb.mi/mi2-until.exp: Remove. * gdb.mi/mi2-watch.exp: Remove. * gdb.mi/mi2-var-block.exp: Remove. * gdb.mi/mi2-var-cmd.exp: Remove. * gdb.mi/mi2-var-display.exp: Remove.
2012-09-21gdb/testsuite:Yao Qi1-215/+0
* gdb.mi/mi-cli.exp: Remove. * gdb.mi/mi2-cli.exp: Merged from mi-cli.exp.
2012-08-09gdb/Yao Qi1-2/+2
* cli/cli-decode.c (set_cmd_prefix): New. (lookup_cmd_for_prefixlist): New. (add_prefix_cmd): Call set_cmd_prefix and update field 'prefix' of each cmd_list_element in *prefixlist. (add_setshow_cmd_full): set_cmd_prefix. (add_alias_cmd): Likewise. * cli/cli-decode.h (struct cmd_list_element) <prefix>: New field. Declare 'auto_boolean_enums'. * cli/cli-setshow.c: Include "observer.h". (notify_command_param_changed_p): New. (add_setshow_auto_boolean_cmd): Move auto_boolean_enums out. Remove 'static'. (do_setshow_command): Split it to ... (do_set_command, do_show_command): ... them. New. (do_set_command): Call observer_notify_command_param_changed if notify_command_param_changed_p returns true. (cmd_show_list): Caller update. * auto-load.c (set_auto_load_cmd): Likewise. * remote.c (show_remote_cmd): Likewise. * cli/cli-setshow.h: Update declarations. * top.c (execute_command): Call do_set_command and do_show_command. * NEWS: Mention new MI notification. * mi/mi-interp.c: Declare mi_command_param_changed. (mi_interpreter_init): Attach mi_command_param_changed to observer command_param_changed. (mi_command_param_changed): New. Remove mi_suppress_breakpoint_notifications. Define global variable mi_suppress_notification. (mi_breakpoint_created): Update. (mi_breakpoint_deleted): Likewise. (mi_breakpoint_modified): Likewise. * mi/mi-main.c (mi_cmd_execute): Likewise. Check command 'gdb-set' and set mi_suppress_notification. * mi/mi-main.h: (mi_suppress_notification): New struct. gdb/doc/ * observer.texi: New observer command_param_changed. * gdb.texinfo (GDB/MI Async Records): Doc for '=cmd-param-changed'. gdb/testsuite/ * gdb.mi/mi-cmd-param-changed.exp: New. * gdb.mi/mi-cli.exp: Update for MI notification "=cmd-param-changed". * gdb.mi/mi-var-rtti.exp, gdb.mi/mi2-cli.exp: Likewise. * gdb.mi/mi2-prompt.exp: Likewise.
2012-07-10 * gdb.mi/dw2-ref-missing-frame.exp: Use standard_testfile,Tom Tromey1-3/+2
standard_output_file. * gdb.mi/gdb2549.exp: Use standard_testfile. * gdb.mi/gdb669.exp: Use standard_testfile. * gdb.mi/gdb701.exp: Use standard_testfile. * gdb.mi/gdb792.exp: Use standard_testfile. * gdb.mi/mi-async.exp: Use standard_testfile. * gdb.mi/mi-basics.exp: Use standard_testfile. * gdb.mi/mi-break.exp: Use standard_testfile. * gdb.mi/mi-cli.exp: Use standard_testfile. * gdb.mi/mi-console.exp: Use standard_testfile. * gdb.mi/mi-disassemble.exp: Use standard_testfile. * gdb.mi/mi-eval.exp: Use standard_testfile. * gdb.mi/mi-file-transfer.exp: Use standard_testfile. * gdb.mi/mi-file.exp: Use standard_testfile. * gdb.mi/mi-inheritance-syntax-error.exp: Use standard_testfile. * gdb.mi/mi-logging.exp: Use standard_testfile. * gdb.mi/mi-nonstop-exit.exp: Use standard_testfile. * gdb.mi/mi-nonstop.exp: Use standard_testfile. * gdb.mi/mi-ns-stale-regcache.exp: Use standard_testfile. * gdb.mi/mi-nsintrall.exp: Use standard_testfile. * gdb.mi/mi-nsmoribund.exp: Use standard_testfile. * gdb.mi/mi-nsthrexec.exp: Use standard_testfile. * gdb.mi/mi-pending.exp: Use standard_testfile, standard_output_file. * gdb.mi/mi-pthreads.exp: Use standard_testfile. * gdb.mi/mi-read-memory.exp: Use standard_testfile. * gdb.mi/mi-regs.exp: Use standard_testfile. * gdb.mi/mi-return.exp: Use standard_testfile. * gdb.mi/mi-reverse.exp: Use standard_testfile. * gdb.mi/mi-simplerun.exp: Use standard_testfile. * gdb.mi/mi-solib.exp: Use standard_testfile, standard_output_file. * gdb.mi/mi-stack.exp: Use standard_testfile. * gdb.mi/mi-stepi.exp: Use standard_testfile. * gdb.mi/mi-stepn.exp: Use standard_testfile. * gdb.mi/mi-syn-frame.exp: Use standard_testfile. * gdb.mi/mi-until.exp: Use standard_testfile. * gdb.mi/mi-var-block.exp: Use standard_testfile. * gdb.mi/mi-var-child-f.exp: Use standard_testfile. * gdb.mi/mi-var-child.exp: Use standard_testfile. * gdb.mi/mi-var-cmd.exp: Use standard_testfile. * gdb.mi/mi-var-cp.exp: Use standard_testfile. * gdb.mi/mi-var-display.exp: Use standard_testfile. * gdb.mi/mi-var-invalidate.exp: Use standard_testfile, standard_output_file. * gdb.mi/mi-var-rtti.exp: Use standard_testfile. * gdb.mi/mi-watch-nonstop.exp: Use standard_testfile. * gdb.mi/mi-watch.exp: Use standard_testfile. * gdb.mi/mi2-amd64-entry-value.exp: Use standard_testfile. * gdb.mi/mi2-basics.exp: Use standard_testfile. * gdb.mi/mi2-break.exp: Use standard_testfile. * gdb.mi/mi2-cli.exp: Use standard_testfile. * gdb.mi/mi2-console.exp: Use standard_testfile. * gdb.mi/mi2-disassemble.exp: Use standard_testfile. * gdb.mi/mi2-eval.exp: Use standard_testfile. * gdb.mi/mi2-file.exp: Use standard_testfile. * gdb.mi/mi2-pthreads.exp: Use standard_testfile. * gdb.mi/mi2-read-memory.exp: Use standard_testfile. * gdb.mi/mi2-regs.exp: Use standard_testfile. * gdb.mi/mi2-return.exp: Use standard_testfile. * gdb.mi/mi2-simplerun.exp: Use standard_testfile. * gdb.mi/mi2-stack.exp: Use standard_testfile. * gdb.mi/mi2-stepi.exp: Use standard_testfile. * gdb.mi/mi2-syn-frame.exp: Use standard_testfile. * gdb.mi/mi2-until.exp: Use standard_testfile. * gdb.mi/mi2-var-block.exp: Use standard_testfile. * gdb.mi/mi2-var-child.exp: Use standard_testfile. * gdb.mi/mi2-var-cmd.exp: Use standard_testfile. * gdb.mi/mi2-var-display.exp: Use standard_testfile. * gdb.mi/mi2-watch.exp: Use standard_testfile.
2012-07-09gdb/testsuite:Yao Qi1-1/+1
* gdb.mi/gdb2549.exp: Remove -DFAKEARGV from compilation flags. * gdb.mi/mi-async.exp, gdb.mi/mi-basics.exp: Likewise. * gdb.mi/mi-break.exp, gdb.mi/mi-cli.exp: Likewise. * gdb.mi/mi-console.exp, gdb.mi/mi-disassemble.exp: Likewise. * gdb.mi/mi-eval.exp, gdb.mi/mi-file.exp: Likewise. * gdb.mi/mi-read-memory.exp, gdb.mi/mi-regs.exp: Likewise. * gdb.mi/mi-return.exp, gdb.mi/mi-reverse.exp: Likewise. * gdb.mi/mi-simplerun.exp, gdb.mi/mi-stack.exp: Likewise. * gdb.mi/mi-stepi.exp, gdb.mi/mi-syn-frame.exp: Likewise. * gdb.mi/mi-until.exp, gdb.mi/mi-var-block.exp: Likewise. * gdb.mi/mi-var-child.exp, gdb.mi/mi-var-cmd.exp: Likewise. * gdb.mi/mi-var-display.exp: Likewise. * gdb.mi/mi-var-invalidate.exp: Likewise. * gdb.mi/mi-watch.exp, gdb.mi/mi2-basics.exp: Likewise. * gdb.mi/mi2-break.exp, gdb.mi/mi2-cli.exp: Likewise. * gdb.mi/mi2-console.exp: Likewise. * gdb.mi/mi2-disassemble.exp: Likewise. * gdb.mi/mi2-eval.exp, gdb.mi/mi2-file.exp: Likewise. * gdb.mi/mi2-read-memory.exp: Likewise. * gdb.mi/mi2-regs.exp, gdb.mi/mi2-return.exp: Likewise. * gdb.mi/mi2-simplerun.exp: Likewise. * gdb.mi/mi2-stack.exp, gdb.mi/mi2-stepi.exp: Likewise. * gdb.mi/mi2-syn-frame.exp: Likewise. * gdb.mi/mi2-until.exp, gdb.mi/mi2-var-block.exp: Likewise. * gdb.mi/mi2-var-child.exp, gdb.mi/mi2-var-cmd.exp: Likewise. * gdb.mi/mi2-var-display.exp, gdb.mi/mi2-watch.exp: Likewise.
2012-01-04Copyright year update in most files of the GDB Project.Joel Brobecker1-2/+1
gdb/ChangeLog: Copyright year update in most files of the GDB Project.
2011-04-27 MI breakpoint notifications.Vladimir Prus1-1/+1
* annotate.c (breakpoint_changed): Adjust parameter type. * breakpoint.c (set_breakpoint_condition): Adjust to change in breakpoint_modified type. (breakpoint_set_commands): Likewise. (do_map_commands_command): Likewise. (bpstat_check_breakpoint_conditions): Notify that breakpoint has changed after bumping hit count. (bpstat_stop_status): Likewise. (print_one_breakpoint_location): Don't wrap in tuple here. (print_one_breakpoint): Always print individual locations. For locations, use unnamed tuple. (disable_breakpoints_in_unloaded_shlib): Notify that breakpoint has changed. (create_catchpoint, create_syscall_event_catchpoint): Call breakpoint_created obsever. (mention): Don't call breakpoint_created observer. (create_breakpoint_sal): Call breakpoint_created observer. (create_breakpoint, watch_command_1): Likewise. (create_ada_exception_breakpoint): Likewise. (delete_breakpoint): Call breakpoint_deleted breakpoint. (locations_are_equal): New. (update_breakpoint_locations): If locations were changed, notify. (set_ignore_count, disable_breakpoint, do_enable_breakpoint): Call breakpoint_modified observer. * mi/mi-cmd-break.c (breakpoint_notify): Adjust. (mi_cmd_break_insert): Don't set observers for modify and delete. * mi/mi-interp.c (mi_suppress_breakpoint_notifications): New. (mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified): New. (mi_interpreter_init): Hook the above. * mi/mi-main.c (mi_cmd_execute): Disable breakpoint notifications while -break-* commands are executing. * mi/mi-main.h (mi_suppress_breakpoint_notifications): New. * mi/mi-out.c (struct ui_out_data): New field original_buffer. (mi_redirect): New. (mi_ui_out_impl): Hook in mi_redirect. (mi_field_skip): True to the name, skip the field, don't output a field with an empty value. * python/py-breakpoint.c (gdbpy_breakpoint_created) (gdbpy_breakpoint_deleted): Adjust. * tui/tui-hooks.c (tui_event_create_breakpoint) (tui_event_delete_breakpoint, tui_event_modify_breakpoint): Adjust.
2011-01-12gdbTom Tromey1-3/+3
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error messages. * mi/mi-main.c (mi_cmd_thread_select): Fix error messages. (mi_cmd_thread_list_ids): Likewise. (mi_cmd_data_list_changed_registers): Likewise. (mi_cmd_data_list_register_values): Likewise. (mi_cmd_data_write_register_values): Likewise. (mi_cmd_data_evaluate_expression): Likewise. (mi_cmd_data_read_memory): Likewise. (mi_cmd_data_read_memory_bytes): Likewise. (mi_cmd_data_write_memory): Likewise. (mi_cmd_enable_timings): Likewise. * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages. * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages. (mi_cmd_var_delete): Likewise. (mi_cmd_var_set_format): Likewise. (mi_cmd_var_show_format): Likewise. (mi_cmd_var_info_num_children): Likewise. (mi_cmd_var_list_children): Likewise. (mi_cmd_var_info_type): Likewise. (mi_cmd_var_info_expression): Likewise. (mi_cmd_var_show_attributes): Likewise. (mi_cmd_var_assign): Likewise. (mi_cmd_var_update): Likewise. (mi_cmd_enable_pretty_printing): Likewise. (mi_cmd_var_set_update_range): Likewise. * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error messages. (mi_cmd_target_file_put): Likewise. (mi_cmd_target_file_delete): Likewise. * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error messages. (mi_cmd_stack_info_depth): Likewise. (mi_cmd_stack_list_locals): Likewise. (mi_cmd_stack_list_args): Likewise. (mi_cmd_stack_select_frame): Likewise. (mi_cmd_stack_select_frame): Likewise. (mi_cmd_stack_info_frame): Likewise. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error messages. (mi_cmd_file_list_exec_source_files): Likewise. * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages. (mi_cmd_env_cd): Likewise. (mi_cmd_env_path): Likewise. (mi_cmd_env_dir): Likewise. (mi_cmd_inferior_tty_show): Likewise. * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages. * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages. (mi_cmd_break_watch): Likewise. gdb/testsuite * gdb.mi/gdb2549.exp: Update for error message changes. * gdb.mi/mi-cli.exp: Likewise. * gdb.mi/mi-disassemble.exp: Likewise. * gdb.mi/mi-pthreads.exp: Likewise. * gdb.mi/mi-regs.exp: Likewise. * gdb.mi/mi-stack.exp: Likewise. * gdb.mi/mi-var-block.exp: Likewise. * gdb.mi/mi-var-cmd.exp: Likewise. * gdb.mi/mi2-cli.exp: Likewise. * gdb.mi/mi2-disassemble.exp: Likewise. * gdb.mi/mi2-pthreads.exp: Likewise. * gdb.mi/mi2-regs.exp: Likewise. * gdb.mi/mi2-stack.exp: Likewise. * gdb.mi/mi2-var-block.exp: Likewise. * gdb.mi/mi2-var-cmd.exp: Likewise.
2011-01-01run copyright.sh for 2011.Joel Brobecker1-1/+1
2010-01-19gdb/testsuite/Jan Kratochvil1-6/+9
* gdb.mi/mi-break.exp (set line_callme_head, set line_callme_body): New. (test_ignore_count): Declare line_callme_body global. (run to breakpoint with ignore count): Use line_callme_body. * gdb.mi/mi-cli.exp (set line_main_head, set line_main_body) (set line_main_hello, set line_main_return): Reindent. (set line_callee4_head, set line_callee4_body, set line_callee4_next): New. (continue to callee4): Use line_callee4_body. (check *stopped from CLI command): Use line_callee4_next. * gdb.mi/mi2-cli.exp (set line_main_head, set line_main_body) (set line_main_hello, set line_main_return): Reindent. (set line_callee4_head, set line_callee4_body): New. (continue to callee4): Use line_callee4_body.
2010-01-01Update copyright year in most headers.Joel Brobecker1-1/+1
Automatic update by copyright.sh.
2009-06-09 * gdb.mi/mi-async.exp, gdb.mi/mi-basics.exp,Daniel Jacobowitz1-2/+2
gdb.mi/mi-break.exp, gdb.mi/mi-cli.exp, gdb.mi/mi-disassemble.exp, gdb.mi/mi-eval.exp, gdb.mi/mi-file-transfer.exp, gdb.mi/mi-file.exp, gdb.mi/mi-regs.exp, gdb.mi/mi-return.exp, gdb.mi/mi-simplerun.exp, gdb.mi/mi-stepi.exp, gdb.mi/mi-var-block.exp, gdb.mi/mi-var-cmd.exp, gdb.mi/mi-var-display.exp, gdb.mi/mi-var-invalidate.exp, gdb.mi/mi-watch.exp, gdb.mi/mi2-basics.exp, gdb.mi/mi2-break.exp, gdb.mi/mi2-cli.exp, gdb.mi/mi2-disassemble.exp, gdb.mi/mi2-eval.exp, gdb.mi/mi2-file.exp, gdb.mi/mi2-regs.exp, gdb.mi/mi2-return.exp, gdb.mi/mi2-simplerun.exp, gdb.mi/mi2-stepi.exp, gdb.mi/mi2-var-block.exp, gdb.mi/mi2-var-child.exp, gdb.mi/mi2-var-cmd.exp, gdb.mi/mi2-var-display.exp, gdb.mi/mi2-watch.exp, gdb.server/ext-run.exp, gdb.server/file-transfer.exp, gdb.server/server-mon.exp, gdb.server/server-run.exp, gdb.trace/actions.exp, gdb.trace/backtrace.exp, gdb.trace/deltrace.exp, gdb.trace/infotrace.exp, gdb.trace/packetlen.exp, gdb.trace/passc-dyn.exp, gdb.trace/passcount.exp, gdb.trace/report.exp, gdb.trace/save-trace.exp, gdb.trace/tfind.exp, gdb.trace/tracecmd.exp, gdb.trace/while-dyn.exp, gdb.trace/while-stepping.exp: Use a unique name for the compiled executable.
2009-03-13 * gdb.mi/mi-cli.exp: Adjust for output difference inVladimir Prus1-4/+21
sync and async modes.
2009-03-12 * gdb.mi/mi-cli.exp: Remove debug print.Vladimir Prus1-1/+0
2009-03-12 Include token in ^running notification for CLI commands.Vladimir Prus1-2/+18
* mi/mi-main.c (mi_execute_command): Set current_token here. (mi_cmd_execute): Do not set current_token here.
2009-02-14 Include frame information for *stopped due to CLI commands.Vladimir Prus1-0/+3
* ada-tasks.c (ada_normal_stop_observer): Adjust prototype. * infcmd.c (finish_command_continuation): Pass '1' for 'print_frame' parameter to the observer. * infrun.c (normal_stop): Don't print mi-specific information here. Pass 'stop_print_frame' to the 'print_frame' parameter of the observer. * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype. If we need to print frame, and current uiout is not the MI one, print frame again.
2009-01-03 Updated copyright notices for most files.Joel Brobecker1-1/+2
2008-06-13 Robustify mi-simplerun.Vladimir Prus1-1/+1
* gdb.mi/basics.c (main): Add a call to sleep. * gdb.mi/mi-cli.exp: Adjust for change in line numbers. * gdb.mi/mi2-cli.exp: Likewise. * gdb.mi/mi-break.exp: Likewise.
2008-04-15 * gdb.base/attach.exp (do_attach_tests): Matching pattern forAleksandar Ristovski1-3/+4
temporary breakpoint to match "Temporary breakpoint". * gdb.base/break.exp (delete_breakpoints): Likewise. * gdb.base/call-ar-st.exp (get_debug_format): Likewise. * gdb.base/commands.exp (temporary_breakpoint_commands): Likewise. * gdb.base/display.exp: Likewise. * gdb.base/foll-exec.exp (do_exec_tests): Likewise. * gdb.base/foll-fork.exp (catch_fork_child_follow): Likewise. * gdb.base/restore.exp (restore_tests): Likewise. * gdb.base/sepdebug.exp: Likewise. * gdb.base/watchpoint.exp: Likewise. * gdb.mi/mi-cli.exp: Added argument for new "disp" field. * gdb.mi/mi-pending.exp: Likewise. * gdb.mi/mi-simplerun.exp (test_running_the_program): Likewise. * gdb.mi/mi-until.exp (test_runnint_to_foo): Likewise. * gdb.mi/mi-var-cmd.exp: Likewise. * gdb.mi/mi-var-display.exp: Likewise. * gdb.mi/mi2-cli.exp: Likewise. * gdb.mi/mi2-simplerun.exp (test_running_the_program): Likewise. * gdb.mi/mi2-until.exp (test_running_to_foo): Likewise. * gdb.mi/mi2-var-display.exp: Likewise. * lib/gdb.exp (gdb_breakpoint): Pattern for temporary breakpoint. * lib/mi-support.exp (mi_runto_helper): Use "after_reason" argument for new "disp" field. (mi_expect_stop): Move after_reason argument to be really after reason. This is to support fix for PR2424.
2008-04-05 * lib/mi-support.exp (mi_expect_stop): New.Vladimir Prus1-38/+6
(mi_run_cmd): Change the token. Use mi_send_resuming_command, use mi_expect_stop. (mi_execute_to_helper): Rename to mi_execute_to. (mi_send_resuming_command): Add more error patterns. (mi_wait_for_stop): Renamed to... (mi_get_stop_line): ...this. (mi_run_inline_test): Adjust. * gdb.mi/mi-cli.exp: Use mi_execute_to/mi_expect_stop. * gdb.mi/mi-console.exp: Likewise. * gdb.mi/mi-pending.exp: Likewise. * gdb.mi/mi-simplerun.exp: Likewise. * gdb.mi/mi-stack.exp: Likewise. * gdb.mi/mi-stepi.exp: Likewise. * gdb.mi/mi-syn-frame.exp: Add comment. * gdb.mi/mi-until.exp: Likewise. * gdb.mi/mi-var-display.exp: Likewise. * gdb.mi/mi-watch.exp: Likewise. * gdb.mi/mi2-cli.exp: Likewise. * gdb.mi/mi2-console.exp: Likewise. * gdb.mi/mi2-simplerun.exp: Likewise. * gdb.mi/mi2-stack.exp: Likewise. * gdb.mi/mi2-stepi.exp: Likewise. * gdb.mi/mi2-until.exp: Likewise. * gdb.mi/mi2-var-display.exp: Likewise. * gdb.mi/mi2-watch.exp: Likewise.
2008-01-22 * breakpoint.c (break_command_really): New parameterVladimir Prus1-1/+1
ignore_count. (break_command_1): Pass 0 as ignore_count to break_command_really. (gdb_breakpoint): Pass ignore_count to break_command_really.
2008-01-01 Updated copyright notices for most files.Daniel Jacobowitz1-1/+1
2007-08-23 Switch the license of all .exp files to GPLv3.Joel Brobecker1-5/+4
Switch the license of all .f and .f90 files to GPLv3. Switch the license of all .s and .S files to GPLv3.
2007-05-142007-05-14 Denis Pilat <denis.pilat@st.com>Denis Pilat1-2/+0
* gdb.mi/mi-console.exp, gdb.mi/gdb669.exp, gdb.mi/mi-cli.exp, gdb.mi/mi-regs.exp, gdb.mi/mi-stepi.exp, gdb.mi/mi-syn-frame.exp, gdb.mi/mi2-cli.exp, gdb.mi/mi2-console.exp, gdb.mi/mi2-disassemble.exp, gdb.mi/mi2-regs.exp, gdb.mi/mi2-stepi.exp, gdb.mi/mi-disassemble.exp, gdb.mi/mi2-syn-frame.exp: Remove commands already run in mi_run_to_main.
2007-01-09Copyright updates for 2007.Daniel Jacobowitz1-1/+1
2006-08-10 * gdb.arch/altivec-abi.exp: Replace gdb_suppress_entire_file withJoel Brobecker1-1/+2
untested followed by return combination. * gdb.arch/altivec-regs.exp: Likewise. * gdb.arch/e500-abi.exp: Likewise. * gdb.arch/e500-regs.exp: Likewise. * gdb.arch/gdb1291.exp: Likewise. * gdb.arch/gdb1431.exp: Likewise. * gdb.arch/gdb1558.exp: Likewise. * gdb.arch/i386-prologue.exp: Likewise. * gdb.arch/i386-unwind.exp: Likewise. * gdb.asm/asm-source.exp: Likewise. * gdb.base/a2-run.exp: Likewise. * gdb.base/advance.exp: Likewise. * gdb.base/all-bin.exp: Likewise. * gdb.base/annota1.exp: Likewise. * gdb.base/annota3.exp: Likewise. * gdb.base/args.exp: Likewise. * gdb.base/arithmet.exp: Likewise. * gdb.base/assign.exp: Likewise. * gdb.base/async.exp: Likewise. * gdb.base/attach.exp: Likewise. * gdb.base/bang.exp: Likewise. * gdb.base/bigcore.exp: Likewise. * gdb.base/bitfields.exp: Likewise. * gdb.base/bitfields2.exp: Likewise. * gdb.base/break.exp: Likewise. * gdb.base/call-sc.exp: Likewise. * gdb.base/call-strs.exp: Likewise. * gdb.base/callfuncs.exp: Likewise. * gdb.base/checkpoint.exp: Likewise. * gdb.base/chng-syms.exp: Likewise. * gdb.base/code-expr.exp: Likewise. * gdb.base/commands.exp: Likewise. * gdb.base/completion.exp: Likewise. * gdb.base/cond-expr.exp: Likewise. * gdb.base/condbreak.exp: Likewise. * gdb.base/consecutive.exp: Likewise. * gdb.base/constvars.exp: Likewise. * gdb.base/corefile.exp: Likewise. * gdb.base/cvexpr.exp: Likewise. * gdb.base/dbx.exp: Likewise. * gdb.base/define.exp: Likewise. * gdb.base/detach.exp: Likewise. * gdb.base/display.exp: Likewise. * gdb.base/dump.exp: Likewise. * gdb.base/ena-dis-br.exp: Likewise. * gdb.base/ending-run.exp: Likewise. * gdb.base/environ.exp: Likewise. * gdb.base/eval-skip.exp: Likewise. * gdb.base/exprs.exp: Likewise. * gdb.base/fileio.exp: Likewise. * gdb.base/finish.exp: Likewise. * gdb.base/float.exp: Likewise. * gdb.base/foll-exec.exp: Likewise. * gdb.base/foll-fork.exp: Likewise. * gdb.base/foll-vfork.exp: Likewise. * gdb.base/freebpcmd.exp: Likewise. * gdb.base/funcargs.exp: Likewise. * gdb.base/gcore.exp: Likewise. * gdb.base/gdb1090.exp: Likewise. * gdb.base/gdb1250.exp: Likewise. * gdb.base/huge.exp: Likewise. * gdb.base/info-proc.exp: Likewise. * gdb.base/interrupt.exp: Likewise. * gdb.base/jump.exp: Likewise. * gdb.base/langs.exp: Likewise. * gdb.base/lineinc.exp: Likewise. * gdb.base/list.exp: Likewise. * gdb.base/logical.exp: Likewise. * gdb.base/long_long.exp: Likewise. * gdb.base/macscp.exp: Likewise. * gdb.base/maint.exp: Likewise. * gdb.base/mips_pro.exp: Likewise. * gdb.base/miscexprs.exp: Likewise. * gdb.base/multi-forks.exp: Likewise. * gdb.base/opaque.exp: Likewise. * gdb.base/overlays.exp: Likewise. * gdb.base/pc-fp.exp: Likewise. * gdb.base/pointers.exp: Likewise. * gdb.base/printcmds.exp: Likewise. * gdb.base/psymtab.exp: Likewise. * gdb.base/ptype.exp: Likewise. * gdb.base/recurse.exp: Likewise. * gdb.base/relational.exp: Likewise. * gdb.base/relocate.exp: Likewise. * gdb.base/remote.exp: Likewise. * gdb.base/reread.exp: Likewise. * gdb.base/restore.exp: Likewise. * gdb.base/return.exp: Likewise. * gdb.base/return2.exp: Likewise. * gdb.base/scope.exp: Likewise. * gdb.base/sect-cmd.exp: Likewise. * gdb.base/sep.exp: Likewise. * gdb.base/sepdebug.exp: Likewise. * gdb.base/setshow.exp: Likewise. * gdb.base/setvar.exp: Likewise. * gdb.base/sigall.exp: Likewise. * gdb.base/sigbpt.exp: Likewise. * gdb.base/signals.exp: Likewise. * gdb.base/signull.exp: Likewise. * gdb.base/sizeof.exp: Likewise. * gdb.base/solib.exp: Likewise. * gdb.base/step-line.exp: Likewise. * gdb.base/step-test.exp: Likewise. * gdb.base/structs.exp: Likewise. * gdb.base/structs2.exp: Likewise. * gdb.base/term.exp: Likewise. * gdb.base/twice.exp: Likewise. * gdb.base/until.exp: Likewise. * gdb.base/varargs.exp: Likewise. * gdb.base/volatile.exp: Likewise. * gdb.base/watchpoint.exp: Likewise. * gdb.base/whatis-exp.exp: Likewise. * gdb.base/whatis.exp: Likewise. * gdb.cp/ambiguous.exp: Likewise. * gdb.cp/annota2.exp: Likewise. * gdb.cp/annota3.exp: Likewise. * gdb.cp/bool.exp: Likewise. * gdb.cp/breakpoint.exp: Likewise. * gdb.cp/casts.exp: Likewise. * gdb.cp/class2.exp: Likewise. * gdb.cp/classes.exp: Likewise. * gdb.cp/cplusfuncs.exp: Likewise. * gdb.cp/ctti.exp: Likewise. * gdb.cp/derivation.exp: Likewise. * gdb.cp/exception.exp: Likewise. * gdb.cp/gdb1355.exp: Likewise. * gdb.cp/hang.exp: Likewise. * gdb.cp/inherit.exp: Likewise. * gdb.cp/local.exp: Likewise. * gdb.cp/m-data.exp: Likewise. * gdb.cp/m-static.exp: Likewise. * gdb.cp/member-ptr.exp: Likewise. * gdb.cp/method.exp: Likewise. * gdb.cp/misc.exp: Likewise. * gdb.cp/namespace.exp: Likewise. * gdb.cp/overload.exp: Likewise. * gdb.cp/ovldbreak.exp: Likewise. * gdb.cp/pr-1023.exp: Likewise. * gdb.cp/pr-1210.exp: Likewise. * gdb.cp/pr-574.exp: Likewise. * gdb.cp/printmethod.exp: Likewise. * gdb.cp/psmang.exp: Likewise. * gdb.cp/ref-params.exp: Likewise. * gdb.cp/ref-types.exp: Likewise. * gdb.cp/rtti.exp: Likewise. * gdb.cp/templates.exp: Likewise. * gdb.cp/try_catch.exp: Likewise. * gdb.cp/userdef.exp: Likewise. * gdb.cp/virtfunc.exp: Likewise. * gdb.disasm/am33.exp: Likewise. * gdb.disasm/h8300s.exp: Likewise. * gdb.disasm/mn10300.exp: Likewise. * gdb.disasm/sh3.exp: Likewise. * gdb.disasm/t01_mov.exp: Likewise. * gdb.disasm/t02_mova.exp: Likewise. * gdb.disasm/t03_add.exp: Likewise. * gdb.disasm/t04_sub.exp: Likewise. * gdb.disasm/t05_cmp.exp: Likewise. * gdb.disasm/t06_ari2.exp: Likewise. * gdb.disasm/t07_ari3.exp: Likewise. * gdb.disasm/t08_or.exp: Likewise. * gdb.disasm/t09_xor.exp: Likewise. * gdb.disasm/t10_and.exp: Likewise. * gdb.disasm/t11_logs.exp: Likewise. * gdb.disasm/t12_bit.exp: Likewise. * gdb.disasm/t13_otr.exp: Likewise. * gdb.hp/gdb.aCC/optimize.exp: Likewise. * gdb.hp/gdb.aCC/watch-cmd.exp: Likewise. * gdb.hp/gdb.base-hp/callfwmall.exp: Likewise. * gdb.hp/gdb.base-hp/dollar.exp: Likewise. * gdb.hp/gdb.base-hp/hwwatchbus.exp: Likewise. * gdb.hp/gdb.base-hp/pxdb.exp: Likewise. * gdb.hp/gdb.base-hp/reg-pa64.exp: Likewise. * gdb.hp/gdb.base-hp/reg.exp: Likewise. * gdb.hp/gdb.base-hp/sized-enum.exp: Likewise. * gdb.hp/gdb.compat/xdb1.exp: Likewise. * gdb.hp/gdb.compat/xdb3.exp: Likewise. * gdb.hp/gdb.objdbg/objdbg01.exp: Likewise. * gdb.hp/gdb.objdbg/objdbg02.exp: Likewise. * gdb.hp/gdb.objdbg/objdbg03.exp: Likewise. * gdb.hp/gdb.objdbg/objdbg04.exp: Likewise. * gdb.mi/gdb701.exp: Likewise. * gdb.mi/gdb792.exp: Likewise. * gdb.mi/mi-basics.exp: Likewise. * gdb.mi/mi-break.exp: Likewise. * gdb.mi/mi-cli.exp: Likewise. * gdb.mi/mi-console.exp: Likewise. * gdb.mi/mi-disassemble.exp: Likewise. * gdb.mi/mi-eval.exp: Likewise. * gdb.mi/mi-file.exp: Likewise. * gdb.mi/mi-read-memory.exp: Likewise. * gdb.mi/mi-regs.exp: Likewise. * gdb.mi/mi-return.exp: Likewise. * gdb.mi/mi-simplerun.exp: Likewise. * gdb.mi/mi-stack.exp: Likewise. * gdb.mi/mi-stepi.exp: Likewise. * gdb.mi/mi-syn-frame.exp: Likewise. * gdb.mi/mi-until.exp: Likewise. * gdb.mi/mi-var-block.exp: Likewise. * gdb.mi/mi-var-child.exp: Likewise. * gdb.mi/mi-var-cmd.exp: Likewise. * gdb.mi/mi-var-display.exp: Likewise. * gdb.mi/mi-watch.exp: Likewise. * gdb.mi/mi2-basics.exp: Likewise. * gdb.mi/mi2-break.exp: Likewise. * gdb.mi/mi2-cli.exp: Likewise. * gdb.mi/mi2-console.exp: Likewise. * gdb.mi/mi2-disassemble.exp: Likewise. * gdb.mi/mi2-eval.exp: Likewise. * gdb.mi/mi2-file.exp: Likewise. * gdb.mi/mi2-read-memory.exp: Likewise. * gdb.mi/mi2-regs.exp: Likewise. * gdb.mi/mi2-return.exp: Likewise. * gdb.mi/mi2-simplerun.exp: Likewise. * gdb.mi/mi2-stack.exp: Likewise. * gdb.mi/mi2-stepi.exp: Likewise. * gdb.mi/mi2-syn-frame.exp: Likewise. * gdb.mi/mi2-until.exp: Likewise. * gdb.mi/mi2-var-block.exp: Likewise. * gdb.mi/mi2-var-child.exp: Likewise. * gdb.mi/mi2-var-cmd.exp: Likewise. * gdb.mi/mi2-var-display.exp: Likewise. * gdb.mi/mi2-watch.exp: Likewise. * gdb.stabs/exclfwd.exp: Likewise. * gdb.stabs/weird.exp: Likewise. * gdb.threads/gcore-thread.exp: Likewise. * gdb.trace/actions.exp: Likewise. * gdb.trace/backtrace.exp: Likewise. * gdb.trace/circ.exp: Likewise. * gdb.trace/collection.exp: Likewise. * gdb.trace/deltrace.exp: Likewise. * gdb.trace/infotrace.exp: Likewise. * gdb.trace/limits.exp: Likewise. * gdb.trace/packetlen.exp: Likewise. * gdb.trace/passc-dyn.exp: Likewise. * gdb.trace/passcount.exp: Likewise. * gdb.trace/report.exp: Likewise. * gdb.trace/save-trace.exp: Likewise. * gdb.trace/tfind.exp: Likewise. * gdb.trace/tracecmd.exp: Likewise. * gdb.trace/while-dyn.exp: Likewise. * gdb.trace/while-stepping.exp: Likewise.
2005-09-272005-09-27 Bob Rossi <bob@brasko.net>Bob Rossi1-4/+4
* gdb.mi/mi-disassemble.exp, gdb.mi/mi2-disassemble.exp: Remove .* from test. Escape the | in mi_gdb_test call. * gdb.mi/mi-basics.exp, gdb.mi/mi-cli.exp, gdb.mi/mi-disassemble.exp, gdb.mi/mi-pthreads.exp, gdb.mi/mi-stack.exp, gdb.mi/mi2-basics.exp, gdb.mi/mi2-cli.exp, gdb.mi/mi2-disassemble.exp, gdb.mi/mi2-pthreads.exp, gdb.mi/mi2-stack.exp: Add extra details to expected regex's in mi_gdb_test calls. * lib/mi-support.exp: Remove arbitrary .* from tests. (mi_gdb_test): Add string_regex variable. Add anchor to main -re. Fully anchor GDB/MI expected results in mi_gdb_test. * lib/gdb.exp (string_to_regexp): Escape the ] character. * gdb.base/sizeof.exp: Remove escape character. Correct test.
2005-05-182005-05-17 Daniel Jacobowitz <dan@codesourcery.com>Daniel Jacobowitz1-6/+6
Dennis Brueni <dennis@slickedit.com> gdb/ * stack.c (print_frame): In MI mode, output a fullname attribute with the stack frame. gdb/doc/ * gdb.texinfo (GDB/MI Breakpoint Table Commands) (GDB/MI Data Manipulation, GDB/MI Program Control) (GDB/MI Stack Manipulation): Update examples to include the fullname attribute in stack frames. gdb/testsuite/ * gdb.mi/mi-cli.exp, gdb.mi/mi-return.exp, gdb.mi/mi-stack.exp, gdb.mi/mi-stepi.exp, gdb.mi/mi-syn-frame.exp, gdb.mi/mi-until.exp, gdb.mi/mi-var-display.exp, gdb.mi/mi-watch.exp, gdb.mi/mi2-cli.exp, gdb.mi/mi2-return.exp, gdb.mi/mi2-stack.exp, gdb.mi/mi2-syn-frame.exp, gdb.mi/mi2-until.exp, gdb.mi/mi2-var-display.exp: Expect fullname field in stack frames. * lib/mi-support.exp (mi_runto, mi_execute_to_helper): Likewise.
2004-08-152004-08-15 Michael Chastain <mec.gnu@mindspring.com>Michael Chastain1-21/+24
* gdb.mi/mi-cli.exp: Use gdb_get_line_number. Remove reference to bug-gnu@prep.ai.mit.edu. * gdb.mi/mi-disassemble.exp: Likewise. * gdb.mi/mi-eval.exp: Likewise. * gdb.mi/mi-file.exp: Likewise. Also, add comment about the default line number. * gdb.mi/mi-return.exp: Likewise. * gdb.mi/mi-simplerun.exp: Likewise. * gdb.mi/mi-stack.exp: Likewise. * gdb.mi/mi-stepi.exp: Likewise. Also, replace wildcarded line number with explicit range test. * gdb.mi/mi-watch.exp: Likewise. * gdb.mi/mi2-break.exp: Likewise. * gdb.mi/mi2-cli.exp: Likewise. * gdb.mi/mi2-disassemble.exp: Likewise. * gdb.mi/mi2-eval.exp: Likewise. * gdb.mi/mi2-file.exp: Likewise. Also, add comment about the default line number. * gdb.mi/mi2-return.exp: Likewise. * gdb.mi/mi2-simplerun.exp: Likewise. * gdb.mi/mi2-stack.exp: Likewise. * gdb.mi/mi2-stepi.exp: Likewise. Also, replace wildcarded line number with explicit range test. * gdb.mi/mi2-watch.exp: Likewise.
2003-02-062003-02-05 Keith Seitz <keiths@redhat.com>Andrew Cagney1-0/+208
Andrew Cagney <ac131313@redhat.com> * gdb.mi/mi-cli.exp: New file.
generated by cgit v1.1 at 2024-12-23 23:33:45 +0000