| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit f99d1d37496f ("Remove gdb/testsuite/configure") removed
gdb/testsuite/configure, as anything gdb/testsuite/configure did could
be done by gdb/configure.
There is however one use case that popped up when this changed
propagated to downstream consumers, to run the testsuite on an already
built GDB. In the workflow of ROCm-GDB at AMD, a GDB package is built
in a CI job. This GDB package is then tested on different machines /
hardware configurations as part of other CI jobs. To achieve this,
those CI jobs only configure the testsuite directory and run "make
check" with an appropriate board file.
In light of this use case, the way I see it is that gdb/testsuite could
be considered its own project. It could be stored in a completely
different repo if we want to, it just happens to be stored inside gdb/.
Since the only downside of having gdb/testsuite/configure is that it
takes a few more seconds to run, but on the other hand it's quite useful
for some people, I propose re-adding it.
In a sense, this is revert of f99d1d37496f, but it's not a direct
git-revert, as some things have changed since.
gdb/ChangeLog:
* configure.ac: Remove things that were moved from
testsuite/configure.ac.
* configure: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Restore.
* configure: Re-generate.
* aclocal.m4: Re-generate.
* Makefile.in (distclean): Add config.status.
(Makefile): Adjust paths.
(lib/pdtrace): Adjust paths.
(config.status): Add.
Change-Id: Ic38c79485e1835712d9c99649c9dfb59667254f1
|
|
I didn't see a strong reason to have a separate configure script in
gdb/testsuite, so this patch removes it. The few relevant configury
bits are moved into gdb's configure script. Some of the old
testsuite/configure script (e.g., the header check) is dead code.
This also adds a Makefile rule to rebuild lib/pdtrace. This was
missing from the old code.
'read1' is now a dependency of check-read1, rather than extra code at
configure time.
Finally, the old "ENABLE_LIBCTF" subst in gdb/configure was not used;
nor was the variable defined, so this was always empty. However, the
lower-case variant was used by the testsuite, so this patch renames
the subst.
gdb/ChangeLog
2021-06-01 Tom Tromey <tromey@adacore.com>
* configure.ac: Copy some code from testsuite/configure.ac.
(enable_libctf): Subst this, not ENABLE_LIBCTF.
* configure: Rebuild.
gdb/testsuite/ChangeLog
2021-06-01 Tom Tromey <tromey@adacore.com>
* aclocal.m4, configure.ac, configure: Remove.
* Makefile.in (EXTRA_RULES): Remove.
($(abs_builddir)/site.exp site.exp): Don't depend on
config.status.
(distclean maintainer-clean realclean, Makefile): Update.
(config.status): Remove target.
(lib/pdtrace): New target.
(all): Don't depend on EXTRA_RULES.
(check-read1): Depend on read1.so, expect-read1.
|
|
This fixes test runs and compilation when --disable-libctf,
--disable-static, or --enable-shared are passed.
Changes since v2: Use GCC_ENABLE and fix indentation. Fix prototype
using 'void'. Use 'unsupported' and gdb_caching_proc.
Changes since v3: Adapt to upstream changes providing skip_ctf_tests.
Changes since v4: Adapt to upstream changes in the seven months (!)
since I last looked at this.
gdb/ChangeLog
* configure.ac: Add --enable-libctf: handle --disable-static
properly.
* acinclude.m4: sinclude ../config/enable.m4.
* Makefile.in (aclocal_m4_deps): Adjust accordingly.
(LIBCTF): Substitute in.
(CTF_DEPS): New, likewise.
(CLIBS): libctf needs symbols from libbfd: move earlier.
(CDEPS): Use CTF_DEPS, not LIBCTF, now LIBCTF can include rpath
flags.
* ctfread.c: Surround in ENABLE_LIBCTF.
(elfctf_build_psymtabs) [!ENABLE_LIBCTF]: New stub.
* configure: Regenerate.
* config.in: Likewise.
gdb/testsuite/ChangeLog
* configure.ac: Add --enable-libctf.
* aclocal.m4: sinclude ../config/enable.m4.
* Makefile.in (site.exp): Add enable_libctf to site.exp.
* lib/gdb.exp (skip_ctf_tests): Use it.
* gdb.base/ctf-constvars.exp: Error message tweak.
* gdb.base/ctf-ptype.exp: Likewise.
* configure: Regenerate.
|
|
Pedro pointed out that sinclude does not error if a file is missing.
This patch changes gdb to only use m4_include, which seems more
correct.
gdb/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* acinclude.m4: Use m4_include, not sinclude.
gdb/gdbserver/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* acinclude.m4: Use m4_include, not sinclude.
gdb/testsuite/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* aclocal.m4: Use m4_include, not sinclude.
Change-Id: I970362e0af7875f9f72796401126acf0ff6dba11
|
|
This patch introduces a new M4 macro GDB_AC_TRANSFORM to avoid repeating
the common idiom which is the transformation of target program names,
i.e. from gdb to sparc64-linux-gnu-gdb. It also makes gdb/configure.ac
and gdb/testsuite/configure.ac to use the new macro.
gdb/ChangeLog:
2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure: Regenerated.
* configure.ac: Use GDB_AC_TRANSFORM.
* Makefile.in (aclocal_m4_deps): Added transform.m4.
* acinclude.m4: sinclude transform.m4.
* transform.m4: New file.
(GDB_AC_TRANSFORM): New macro.
gdb/testsuite/ChangeLog:
2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure: Regenerated.
* configure.ac: Use GDB_AC_TRANSFORM.
* aclocal.m4: sinclude ../transform.m4.
|
|
* README: Mention parallel check.
gdb/testsuite
* dg-extract-results.sh: New file.
* Makefile.in (FORCE_PARALLEL): New variable.
(CHECK_TARGET): New conditional variable.
(check): Use CHECK_TARGET.
(DO_RUNTEST): New variable.
(check-single): New target.
(TEST_DIRS): New variable.
(TEST_TARGETS): Likewise.
(check-parallel): New target.
(check-gdb.%): New pattern.
(BASE1_FILES): New variable.
(BASE2_FILES): Likewise.
(check-gdb.base%): New pattern.
(%/.dir): New pattern.
* configure: Rebuild.
* aclocal.m4 (AM_CONDITIONAL): New defun.
* configure.ac: Check whether user is using GNU make.
(GMAKE): New conditional.
|
|
2008-04-23 Paolo Bonzini <bonzini@gnu.org>
* acinclude.m4: Add override.m4.
* configure: Regenerate.
gdb/gdbserver:
2008-04-23 Paolo Bonzini <bonzini@gnu.org>
* acinclude.m4: Add override.m4.
* configure: Regenerate.
gdb/testsuite:
2008-04-23 Paolo Bonzini <bonzini@gnu.org>
* aclocal.m4: Add override.m4.
* configure: Regenerate.
|
|
* NEWS: Mention qSupported.
* remote.c (struct remote_state): Add explicit_packet_size.
(get_remote_packet_size): Check explicit_packet_size.
(get_memory_packet_size): Likewise.
(PACKET_qSupported): New enum value.
(struct protocol_feature, remote_supported_packet)
(remote_packet_size, remote_protocol_features)
(remote_query_supported): New.
(remote_open_1): Reset explicit_packet_size. Call
remote_query_supported.
(_initialize_remote): Register qSupported.
gdb/doc/
* gdb.texinfo (Remote configuration): Document set / show
remote supported-packets.
(General Query Packets): Document qSupported packet.
gdb/gdbserver/
* server.c (handle_query): Handle qSupported.
|
|
|
