| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It's a bit difficult to create an unsized array type in Rust, but if
you do, right now ptype will show something like "[u8; ]". It really
should print "[u8]", though, which is what this patch implements.
This is part of PR 21466.
Built and regtested on x86-64 Fedora 25. I'm checking this in.
ChangeLog
2017-05-21 Tom Tromey <tom@tromey.com>
PR rust/21466:
* rust-lang.c (rust_print_type) <TYPE_CODE_ARRAY>: Print unsized
arrays as "[T]", not "[T; ]".
testsuite/ChangeLog
2017-05-21 Tom Tromey <tom@tromey.com>
PR rust/21466:
* gdb.rust/unsized.exp: New file.
* gdb.rust/unsized.rs: New file.
|
|
PR rust/21484 notes that watch -location does not work with Rust:
(gdb) watch -location a
syntax error in expression, near `) 0x00007fffffffe0f4'.
update_watchpoint tries to tell gdb that the new expression it creates
has C syntax:
/* The above expression is in C. */
b->language = language_c;
However, update_watchpoint doesn't actually use this language when
re-parsing the expression.
Originally I was going to fix this by saving and restoring the
language in update_watchpoint, but this regressed
gdb.dlang/watch-loc.exp, because the constructed expression actually
has D syntax (specifically the name is not parseable by C).
Next I looked at directly constructing an expression, and not relying
on the parser at all; but it seemed to me that upon a re-set, we'd
want to reparse the type, and there is no existing API to do this
correctly.
So, in the end I made a hook to let each language choose what
expression to use. I made all the languages other than Rust use the C
expression, because that is the status quo ante. However, this is
probably not truly correct. After this patch, at least, it is easy to
correct by someone who knows the language(s) in question.
Regtested by the buildbot.
ChangeLog
2017-05-19 Tom Tromey <tom@tromey.com>
PR rust/21484:
* rust-lang.c (exp_descriptor_rust): New function.
(rust_language_defn): Use it.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn)
<la_watch_location_expression>: New member.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* go-lang.c (go_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* d-lang.c (d_language_defn): Update.
* c-lang.h (c_watch_location_expression): Declare.
* c-lang.c (c_watch_location_expression): New function.
(c_language_defn, cplus_language_defn, asm_language_defn)
(minimal_language_defn): Use it.
* breakpoint.c (watch_command_1): Call
la_watch_location_expression.
* ada-lang.c (ada_language_defn): Update.
testsuite/ChangeLog
2017-05-19 Tom Tromey <tom@tromey.com>
PR rust/21484:
* gdb.rust/watch.exp: New file.
* gdb.rust/watch.rs: New file.
|
|
With Rust 1.18 and 1.19, I saw some test suite failures. They were
all of the same form -- Box seems to be qualified in the output now,
like:
print box_some
$64 = core::option::Option<alloc::boxed::Box<u8>>::Some(0x7ffff6c21018 "\001\000")
... where the test was expecting Option<Box<u8>>.
This patch fixes the problem in a way that should work with earlier
versions of Rust.
gdb/testsuite/ChangeLog
2017-05-18 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Allow Box to be qualified.
|
|
2017-05-18 Thomas Preud'homme <thomas.preudhomme@arm.com>
gdb/testsuite/
* gdb.base/float.exp: Expect GDB prompt for targets without FPU.
|
|
src/gdb/testsuite/gdb.base/fileio.c: In function ‘test_write’:
src/gdb/testsuite/gdb.base/fileio.c:158:5: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
printf ("write 1: ret = %d, errno = %d\n", ret, errno);
^
gdb/ChangeLog:
2017-05-18 Pedro Alves <palves@redhat.com>
* gdb.base/fileio.c (test_write, test_read, test_close)
(test_fstat): Don't print 'ret' in the fail path.
|
|
All the "test_" functions warn like:
src/gdb/testsuite/gdb.base/fileio.c: In function ‘test_close’:
src/gdb/testsuite/gdb.base/fileio.c:280:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
Nothing looks at the return of these functions, so just make them
return void. While at it, "()" is not the same as "(void)" in C - fix
that too.
gdb/ChangeLog:
2017-05-18 Pedro Alves <palves@redhat.com>
* gdb.base/fileio.c (stop, test_open, test_write, test_read)
(test_lseek, test_close, test_stat, test_fstat, test_isatty)
(test_system, test_rename, test_unlink, test_time): Change
prototypes.
* gdb.base/fileio.exp (stop_msg): Adjust.
|
|
... and quiet -Wnonnull in a different way.
gdb/testsuite/ChangeLog:
2017-05-18 Pedro Alves <palves@redhat.com>
* gdb.base/fileio.c (null_str): New global.
(test_stat): Use it.
* gdb.base/fileio.exp: Remove nowarnings.
|
|
I see the following warning in gdb.base/fileio.c,
testsuite/gdb.base/fileio.c:297:3: warning: null argument where non-null required (argument 1) [-Wnonnull]
ret = stat (NULL, &st);
^
This patch adds "nowarnings" to the list passed to gdb_compile.
gdb/testsuite:
2017-05-17 Yao Qi <yao.qi@linaro.org>
* gdb.base/fileio.exp: Pass nowarnings to gdb_compile.
|
|
When we add alias command, we call add_alias_cmd and pass the alias name
and command name. This implicitly requires the command and its prefix
commands are already added to cmdlist. This may not be true, for example,
add_com_alias ("tty", "set inferior-tty", class_alias, 0);
"inferior-tty" command is added to setlist, but setlist may not be added
to cmdlist (It depends on the order of related _initialize_XXX functions
called) so that we can't find "set inferior-tty" from cmdlist.
This patch fixes this problem by passing cmd_list_element of "inferior-tty"
to add_alias_cmd, so that cmd_list_element of "inferior-tty" doesn't have
to be reachable from cmdlist at that moment.
gdb:
2017-05-17 Yao Qi <yao.qi@linaro.org>
* cli/cli-decode.c (add_alias_cmd): New function.
* command.h (add_alias_cmd): Declare.
* infcmd.c (_initialize_infcmd): Don't call add_com_alias,
instead call add_alias_cmd.
gdb/testsuite:
2017-05-17 Simon Marchi <simon.marchi@ericsson.com>
* gdb.base/set-inferior-tty.exp (test_set_inferior_tty): Add
argument command.
(top-level): Invoke test_set_inferior_tty.
|
|
Fix several instances of:
...
python print not f1calls
File "<string>", line 1
print not f1calls
^
SyntaxError: Missing parentheses in call to 'print'
Error while executing Python code.
(gdb) FAIL: gdb.python/py-record-btrace-threads.exp: thread=1: checking thread 1: python print not f1calls
...
gdb/testsuite/ChangeLog:
2017-05-04 Pedro Alves <palves@redhat.com>
* gdb.python/py-record-btrace-threads.exp (check_insn_for_thread):
Add parens to print call for Python 3.
|
|
On some platforms, e.g., arm-eabi-none, we need to make certain that
malloc is linked into the program because the test suite uses function
calls requiring malloc:
(gdb) p foo101("abc")
evaluation of this expression requires the program to have a function "malloc".
gdb/testsuite/ChangeLog
* gdb.cp/oranking.cc (dummy): New function to grab malloc.
(main): Call it.
|
|
Remove gdb.BtraceFunctionCall and replace by gdb.FunctionSegment. Additionally,
rename prev_segment and next_segment to prev and next.
|
|
As discussed here: https://sourceware.org/ml/gdb-patches/2017-04/msg00157.html
A gap is not an instruction and it should not pretend to be one.
gdb.Record.instruction_history is now a list of gdb.RecordInstruction and
gdb.RecordGap objects. This allows the user to deal with Gaps in the record
in a more sane way.
|
|
As discussed here: https://sourceware.org/ml/gdb-patches/2017-04/msg00166.html
|
|
The user would always get the instruction_history and function_call_history
objects of the current thread, not the thread for which the gdb.Record object
was created.
The attached testcase fails without this patch and passes with the patch.
|
|
This has been on my TODO list for a while. There's a really old bug
about this (PR testsuite/8595), and there was no reason for
environ.exp to be specific for hppa* targets. So this patch removes
this constraint, modernizes the testcase, and cleans up some things.
Most of the tests remained, and some were rewritten (especially the
one that checks if "show environment" works, which is something kind
of hard to do).
As a bonus, I'm adding a separated info-program.exp file containing
all the tests related to "info program" that were present on
environ.exp.
Tested locally, everything still passes.
gdb/testsuite/ChangeLog:
2017-04-28 Sergio Durigan Junior <sergiodj@redhat.com>
PR testsuite/8595
* gdb.base/environ.exp: Make test available in all architectures.
Move bits related to "info program" testing to
gdb.base/info-program.exp. Rewrite tests to use the two new
procedures mentione below.
(test_set_show_env_var) New procedure.
(test_set_show_env_var_equal): Likewise.
* gdb.base/info-program.exp: New file.
|
|
The following patch fixes several outstanding overload resolution problems
with rvalue references and cv qualifiers in the test suite. The tests for
these problems typically passed with one compiler version and failed with
another. This behavior occurs because of the ordering of the overloaded
functions in the debug info. So the first best match "won out" over the
a subsequent better match.
One of the bugs addressed by this patch is the failure of rank_one_type to
account for type equality of two overloads based on CV qualifiers. This was
leading directly to problems evaluating rvalue reference overload quality,
but it is also highlighted in gdb.cp/oranking.exp, where two test KFAIL as
a result of this shortcoming.
I found the overload resolution code committed with the rvalue reference
patch (f9aeb8d49) needlessly over-complicated, and I have greatly simplified
it. This fixes some KFAILing tests in gdb.exp/rvalue-ref-overload.exp.
gdb/ChangeLog
* gdbtypes.c (LVALUE_REFERENCE_TO_RVALUE_BINDING_BADNESS)
DIFFERENT_REFERENCE_TYPE_BADNESS): Remove.
(CV_CONVERSION_BADNESS): Define.
(rank_one_type): Remove overly restrictive rvalue reference
rank checks.
Add cv-qualifier checks and subranks for type equality.
* gdbtypes.h (REFERENCE_CONVERSION_RVALUE,
REFERENCE_CONVERSION_CONST_LVALUE, CV_CONVERSION_BADNESS,
CV_CONVERSION_CONST, CV_CONVERSION_VOLATILE): Declare.
gdb/testsuite/ChangeLog
* gdb.cp/oranking.cc (test15): New function.
(main): Call test15 and declare additional variables for testing.
* gdb.cp/oranking.exp: Remove kfail status for "p foo4(&a)" and
"p foo101('abc')" tests.
* gdb.cp/rvalue-ref-overloads.exp: Remove kfail status for
"lvalue reference overload" test.
* gdb.cp/rvalue-ref-params.exp: Remove kfail status for
"print value of f1 on Child&& in f2" test.
|
|
This patch fixes an internal error exposed by a test that does
something like:
define kill-and-remove
kill inferiors 2
remove-inferiors 2
end
# Start one inferior.
start
# Start another inferior.
add-inferior 2
inferior 2
start
# Kill and remove inferior 1 while inferior 2 is selected.
thread apply 1.1 kill-and-remove
The internal error looks like this:
Thread 1.1 (Thread 0x7ffff7fc2700 (LWP 20677)):
[Switching to inferior 1 [process 20677] (gdb/testsuite/outputs/gdb.threads/threadapply/threadapply)]
[Switching to thread 1.1 (Thread 0x7ffff7fc2700 (LWP 20677))]
#0 main () at src/gdb/testsuite/gdb.threads/threadapply.c:38
38 for (i = 0; i < NUM; i++)
src/gdb/inferior.c:66: internal-error: void set_current_inferior(inferior*): Assertion `inf != NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/threadapply.exp: kill_and_remove_inferior: try kill-and-remove: thread apply 1.1 kill-and-remove (GDB internal error)
There are several problems around this area of the code. One is that
in do_restore_current_thread_cleanup, we do a look up of inferior by
ptid, which can find the wrong inferior if the previously selected
inferior exited and some other inferior was started with a reused pid
(rare, but still...).
The other problem is that the "remove-inferiors" command rejects
attempts to remove the current inferior, but when we get to
"remove-inferiors" in a "thread apply THR remove-inferiors 2" command,
the current inferior is the inferior of thread THR, not the previously
selected inferior, so if the previously selected inferior was inferior
2, that command still manages to wipe it, and then gdb restores the
old selected inferior, which is now a dangling pointer...
So the fix here is:
- Make make_cleanup_restore_current_thread store a pointer to the
previously selected inferior directly, and use it directly instead
of doing ptid look ups.
- Add a refcount to inferiors, very similar to thread_info's refcount,
that is incremented/decremented by
make_cleanup_restore_current_thread, and checked before deleting an
inferior. To avoid duplication, a new refcounted_object type is
added, that both thread_info and inferior inherit from.
gdb/ChangeLog:
2017-04-19 Pedro Alves <palves@redhat.com>
* common/refcounted-object.h: New file.
* gdbthread.h: Include "common/refcounted-object.h".
(thread_info): Inherit from refcounted_object and add comments.
(thread_info::incref, thread_info::decref)
(thread_info::m_refcount): Delete.
(thread_info::deletable): Use the refcounted_object::refcount()
method.
* inferior.c (current_inferior_): Add comment.
(set_current_inferior): Increment/decrement refcounts.
(prune_inferiors, remove_inferior_command): Skip inferiors marked
not-deletable instead of comparing with the current inferior.
(initialize_inferiors): Increment the initial inferior's refcount.
* inferior.h (struct inferior): Forward declare.
Include "common/refcounted-object.h".
(current_inferior, set_current_inferior): Move declaration to
before struct inferior's definition, and fix comment.
(inferior): Inherit from refcounted_object. Add comments.
* thread.c (switch_to_thread_no_regs): Reference the thread's
inferior pointer directly instead of doing a ptid lookup.
(switch_to_no_thread): New function.
(switch_to_thread(thread_info *)): New function, factored out
from ...
(switch_to_thread(ptid_t)): ... this.
(restore_current_thread): Delete.
(current_thread_cleanup): Remove 'inf_id' and 'was_removable'
fields, and add 'inf' field.
(do_restore_current_thread_cleanup): Check whether old->inf is
alive instead of looking up an inferior by ptid. Use
switch_to_thread and switch_to_no_thread.
(restore_current_thread_cleanup_dtor): Use old->inf directly
instead of lookup up an inferior by id. Decref the inferior.
Don't restore 'removable'.
(make_cleanup_restore_current_thread): Same the inferior pointer
in old, instead of the inferior number. Incref the inferior.
Don't save/clear 'removable'.
gdb/testsuite/ChangeLog:
2017-04-19 Pedro Alves <palves@redhat.com>
* gdb.threads/threadapply.exp (kill_and_remove_inferior): New
procedure.
(top level): Call it.
* lib/gdb.exp (gdb_define_cmd): New procedure.
|
|
ChangeLog entries were left unstaged in my previous commit on March 30th.
|
|
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
|
|
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
|
|
This commit adds a test for the fix of PR 21352.
gdb/testsuite/ChangeLog:
2017-04-05 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21352
* gdb.trace/tsv.exp: Add test for "tsave -r".
|
|
$ gdb rustc
Reading symbols from rustc...Reading symbols from /usr/lib/debug/usr/bin/rustc.debug...done.
done.
warning: Invalid entry in .debug_gdb_scripts section
/usr/bin/rustc
Section Headers:
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[15] .debug_gdb_scripts PROGBITS 00000000000008ed 0008ed 000022 00 AMS 0 0 1
/usr/lib/debug/usr/bin/rustc.debug
Section Headers:
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[15] .debug_gdb_scripts NOBITS 00000000000008ed 000280 000022 00 AMS 0 0 1
There remains questionable whether bfd_get_section_by_name() should not return
an error for !SEC_LOAD but I haven't investigated that.
gdb/ChangeLog
2017-03-29 Jan Kratochvil <jan.kratochvil@redhat.com>
* auto-load.c (auto_load_section_scripts): Check SEC_HAS_CONTENTS.
gdb/testsuite/ChangeLog
2017-03-29 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.python/py-section-script.exp (sepdebug): New testcases.
|
|
Add a prologue analysis that recognizes all instructions that may happen in
compiler-generated prologue, including various stores, core register moves,
subtraction and ENTER_S instruction that does a lot of prologue actions through
microcode.
Testcases cover various prologue scenarios, including instructions that are
spread across multiple 16-bit encodings (for example there are 7 encodings of
store instruction).
gdb/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* arc-tdep.c (arc_frame_cache): Add support for prologue analysis.
(arc_skip_prologue): Likewise.
(arc_make_frame_cache): Likewise.
(arc_pv_get_operand): New function.
(arc_is_in_prologue): Likewise.
(arc_analyze_prologue): Likewise.
(arc_print_frame_cache): Likewise.
(MAX_PROLOGUE_LENGTH): New constant.
gdb/doc/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* gdb.texinfo (Synopsys ARC): Document "set debug arc 2".
gdb/testsuite/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* gdb.arch/arc-analyze-prologue.S: New file.
* gdb.arch/arc-analyze-prologue.exp: Likewise.
|
|
Add disassembler helper for GDB, that uses opcodes structure arc_instruction
and adds convenience functions to handle instruction operands. This interface
solves at least those problems with arc_instruction:
* Some instructions, like "push_s", have implicit operands which are not
directly present in arc_instruction.
* Operands of particular meaning, like branch/jump targets, have various
locations and meaning depending on type of branch/target.
* Access to operand value is abstracted into a separate function, so callee
code shouldn't bother if operand value is an immediate value or in a
register.
Testcases included in this commit are fairly limited - they test exclusively
branch instructions, something that will be used in software single stepping.
Most of the other parts of this disassembler helper are tested during prologue
analysis testing.
gdb/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* configure.tgt: Add arc-insn.o.
* arc-tdep.c (arc_delayed_print_insn): Make non-static.
(dump_arc_instruction_command): New function.
(arc_fprintf_disasm): Likewise.
(arc_disassemble_info): Likewise.
(arc_insn_get_operand_value): Likewise.
(arc_insn_get_operand_value_signed): Likewise.
(arc_insn_get_memory_base_reg): Likewise.
(arc_insn_get_memory_offset): Likewise.
(arc_insn_get_branch_target): Likewise.
(arc_insn_dump): Likewise.
(arc_insn_get_linear_next_pc): Likewise.
* arc-tdep.h (arc_delayed_print_insn): Add function declaration.
(arc_disassemble_info): Likewise.
(arc_insn_get_branch_target): Likewise.
(arc_insn_get_linear_next_pc): Likewise.
* NEWS: Mention new "maint print arc arc-instruction".
gdb/doc/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* gdb.texinfo (Synopsys ARC): Add "maint print arc arc-instruction".
gdb/testsuite/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* gdb.arch/arc-decode-insn.S: New file.
* gdb.arch/arc-decode-insn.exp: Likewise.
|
|
While at it, decode also properly one-bit flags for %fsr (accrued and
current exception flags were mixed up).
ChangeLog entry:
2017-03-21 Ivo Raisr <ivo.raisr@oracle.com>
PR tdep/20928
* gdb/sparc-tdep.h (gdbarch_tdep) <sparc64_ccr_type>: New field.
* gdb/sparc64-tdep.c (sparc64_ccr_type): New function.
(sparc64_fsr_type): Fix %fsr decoding.
ChangeLog entry for testsuite:
2017-03-21 Ivo Raisr <ivo.raisr@oracle.com>
PR tdep/20928
* gdb.arch/sparc64-regs.exp: New file.
* gdb.arch/sparc64-regs.S: Likewise.
|
|
This changes the return type of "gdb.BtraceInstruction.data ()" from
"memoryview" to "buffer" on Python 2.7 and below, similar to what
"gdb.Inferior.read_memory ()" does.
|
|
This patch adds tests for the initial rvalue reference support patchset. All
of the new tests are practically mirrored regular references tests and, except
for the demangler ones, are introduced in new files, which are set to be
compiled with -std=gnu++11. Tested are printing of rvalue reference types and
values, rvalue reference parameters in function overloading, demangling of
function names containing rvalue reference parameters, casts to rvalue
reference types, application of the sizeof operator to rvalue reference types
and values, and support for rvalue references within the gdb python module.
gdb/ChnageLog
PR gdb/14441
* NEWS: Mention support for rvalue references in GDB and python.
* doc/gdb.texinfo (C Plus Plus Expressions): Mention that GDB
supports both lvalue and rvalue references.
gdb/testsuite/ChangeLog
PR gdb/14441
* gdb.cp/demangle.exp: Add rvalue reference tests.
* gdb.cp/rvalue-ref-casts.cc: New file.
* gdb.cp/rvalue-ref-casts.exp: New file.
* gdb.cp/rvalue-ref-overload.cc: New file.
* gdb.cp/rvalue-ref-overload.exp: New file.
* gdb.cp/rvalue-ref-params.cc: New file.
* gdb.cp/rvalue-ref-params.exp: New file.
* gdb.cp/rvalue-ref-sizeof.cc: New file.
* gdb.cp/rvalue-ref-sizeof.exp: New file.
* gdb.cp/rvalue-ref-types.cc: New file.
* gdb.cp/rvalue-ref-types.exp: New file.
* gdb.python/py-rvalue-ref-value-cc.cc: New file.
* gdb.python/py-rvalue-ref-value-cc.exp: New file.
|
|
This change adds the MI equivalent for the "info sharedlibrary"
command. The command was already partially documented but ignored as
it was not implemented. The new MI command works similarly to the CLI
command, taking an optional regular expression as an argument and
outputting the library information.
I included a test for the new command in mi-solib.exp.
gdb/doc/ChangeLog:
* gdb.texinfo (gdb/mi Symbol Query Commands): Document new MI
command file-list-shared-libraries
(GDB/MI Async Records): Update documentation of library-loaded with new
field.
gdb/ChangeLog:
* NEWS: Add an entry about new '-file-list-shared-libraries' command.
* mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries):
New function definition.
* mi/mi-cmds.c (mi_cmds): Add -file-list-shared-libraries command.
* mi/mi-cmds.h (mi_cmd_file_list_shared_libraries):
New function declaration.
* mi/mi-interp.c (mi_output_solib_attribs): New Function.
* mi/mi-interp.h: New file.
* solib.c (info_sharedlibrary_command): Replace for loop with
ALL_SO_LIBS macro
* solib.h (update_solib_list): New function declaration.
(so_list_head): Move macro.
* solist.h (ALL_SO_LIBS): New macro.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-solib.exp (test_file_list_shared_libraries):
New procedure.
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
|
|
When using mi_gdb_test, if it fails because of the presence of
unexpected output, the error message is only the message passed as
the argument with no indication that there was an unexpected output.
This change adds an additional text to the failure message to
indicate that there was an unexpected output.
gdb/testsuite/ChangeLog:
* lib/mi-support.exp (mi_gdb_test): Add additional message
for unexpected output.
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
|
|
The test case examine-backward.exp issues the command "x/-s" after the end
of the first string in TestStrings, but without making sure that this
string is preceded by a string terminator. Thus GDB may spuriously print
some random characters from before that string, and then the test fails.
This patch assures that TestStrings is preceded by a string terminator.
gdb/testsuite/ChangeLog:
* gdb.base/examine-backward.c (Barrier): New character array
constant, to ensure that TestStrings is preceded by a string
terminator.
|
|
Recently I fixed a bug that caused a DW_OP_implicit_pointer with non-zero
offset into a DW_OP_implicit_value to be handled incorrectly on big-endian
targets. GDB ignored the offset and copied the wrong bytes:
https://sourceware.org/ml/gdb-patches/2017-01/msg00251.html
But there is still a similar issue when a DW_OP_implicit_pointer points
into a DW_OP_stack_value instead; and again, the offset is ignored. There
is an important difference, though: While implicit values are treated like
blocks of data and anchored at the lowest-addressed byte, stack values
traditionally contain integer numbers and are anchored at the *least
significant* byte. Also, stack values do not come in varying sizes, but
are cut down appropriately when used. Thus, on big-endian targets the
scenario looks like this (higher addresses shown right):
|<- - - - - Stack value - - - - - - ->|
| |
|<- original object ->|
|
| offset ->|####|
^^^^
de-referenced
implicit pointer
(Note how the original object's size influences the position of the
de-referenced implicit pointer within the stack value. This is not the
case for little-endian targets, where the original object starts at offset
zero within the stack value.)
This patch implements the logic indicated in the above diagram and adds an
appropriate test case. A new function dwarf2_fetch_die_type_sect_off is
added; it is used for retrieving the original object's type, so its size
can be determined. That type is passed to dwarf2_evaluate_loc_desc_full
via a new parameter.
gdb/ChangeLog:
* dwarf2loc.c (indirect_synthetic_pointer): Get data type of
pointed-to DIE and pass it to dwarf2_evaluate_loc_desc_full.
(dwarf2_evaluate_loc_desc_full): New parameter subobj_type; rename
byte_offset to subobj_byte_offset. Fix the handling of
DWARF_VALUE_STACK on big-endian targets when coming via an
implicit pointer.
(dwarf2_evaluate_loc_desc): Adjust call to
dwarf2_evaluate_loc_desc_full.
* dwarf2loc.h (dwarf2_fetch_die_type_sect_off): New declaration.
* dwarf2read.c (dwarf2_fetch_die_type_sect_off): New function.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp: Add support for DW_OP_implicit_pointer.
* gdb.dwarf2/nonvar-access.exp: Add test for stack value location
and implicit pointer into such a location.
|
|
Somehow got dropped in earlier commit.
gdb/testsuite/ChangeLog:
* gdb.python/py-lazy-string (pointer): Really add new typedef.
|
|
|
|
This patch keeps the Scheme side of lazy string handling in sync
with the python size, bringing over fixes for
PRs python/17728, python/18439, python/18779.
gdb/ChangeLog:
* guile/scm-lazy-string.c (lazy_string_smob): Clarify use of LENGTH
member. Change type of TYPE member to SCM. All uses updated.
(lsscm_make_lazy_string_smob): Add assert.
(lsscm_make_lazy_string): Flag bad length values.
(lsscm_elt_type): New function.
(gdbscm_lazy_string_to_value): Rewrite to use
lsscm_safe_lazy_string_to_value.
(lsscm_safe_lazy_string_to_value): Fix handling of TYPE_CODE_PTR.
* guile/scm-value.c (gdbscm_value_to_lazy_string): Flag bad length
values. Fix TYPE_CODE_PTR. Handle TYPE_CODE_ARRAY. Handle typedefs
in incoming type.
* guile/guile-internal.h (tyscm_scm_to_type): Declare.
* guile/scm-type.c (tyscm_scm_to_type): New function.
gdb/testsuite/ChangeLog:
* gdb.guile/scm-value.c (main) Delete locals sptr, sn.
* gdb.guile/scm-lazy-string.c: New file.
* gdb.guile/scm-value.exp: Move lazy string tests to ...
* gdb.guile/scm-lazy-string.exp: ... here, new file. Add more tests
for pointer, array, typedef lazy strings.
|
|
gdb/ChangeLog:
PR python/17728, python/18439, python/18779
* python/py-lazy-string.c (lazy_string_object): Clarify use of LENGTH
member. Change type of TYPE member to PyObject *. All uses updated.
(stpy_convert_to_value): Fix handling of TYPE_CODE_PTR.
(gdbpy_create_lazy_string_object): Flag bad length values.
Handle TYPE_CODE_ARRAY with possibly different user-provided length.
Handle typedefs in incoming type.
(stpy_lazy_string_elt_type): New function.
(gdbpy_extract_lazy_string): Call it.
* python/py-value.c (valpy_lazy_string): Flag bad length values.
Fix handling of TYPE_CODE_PTR. Handle TYPE_CODE_ARRAY. Handle
typedefs in incoming type.
gdb/testsuite/ChangeLog:
PR python/17728, python/18439, python/18779
* gdb.python/py-value.c (main) Delete locals sptr, sn.
* gdb.python/py-lazy-string.c (pointer): New typedef.
(main): New locals ptr, array, typedef_ptr.
* gdb.python/py-value.exp: Move lazy string tests to ...
* gdb.python/py-lazy-string.exp: ... here. Add more tests for pointer,
array, typedef lazy strings.
|
|
The expectation in gdb.cp/m-static.exp for the ptype of
single_constructor is to get in the result of destructor with the
following prototype: ~single_constructor(int).
Yet, m-static.cc declares the destructor as ~single_constructor(). This
commit fixes the expectation.
2017-03-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
gdb/testsuite/
* gdb.cp/m-static.exp: Fix expectation for prototype of
test5.single_constructor and single_constructor::single_constructor.
|
|
An optional parameter TEST has been added to get_hexadecimal_valueof in commit:
https://sourceware.org/ml/gdb-patches/2016-06/msg00469.html
This patch adds a similar optional parameter to other related methods that
retrieve expression values: get_valueof, get_integer_valueof and get_sizeof.
Thus tests that evaluate same expression multiple times can provide custom
test names, ensuring that test names will be unique.
gdb/testsuite/ChangeLog:
2017-03-14 Anton Kolesov <anton.kolesov@synopsys.com>
* lib/gdb.exp (get_valueof, get_integer_valueof, get_sizeof):
Add optional 'test' parameter.
|
|
I noticed that backslash_in_multi_line_command_test in
gdb.base/commands.exp failed on our RHEL6 servers. I traced it to the
old version of DejaGnu (1.4.4). I have found that instead of receiving
the expected:
"print \\\nargc\n"
gdb received:
"print argc\n"
thus breaking the test and its purpose. Versionof DejaGnu < 1.5 mess
up sending "\\\n", it somehow gets replaced with a space. I found that
the following commit in DejaGnu fixed the issue:
http://git.savannah.gnu.org/cgit/dejagnu.git/commit/lib/remote.exp?id=3f39294f5cd6802858838d3bcc0ccce847ae17f2
Even though the commit is almost 10 years old, the following release of
DejaGnu was only in 2013, which is why we still have systems with the
old code.
If the DejaGnu version is < 1.5, we just skip the test.
gdb/testsuite/ChangeLog:
* gdb.base/commands.exp (backslash_in_multi_line_command_test):
Skip for versions of DejaGnu < 1.5.
|
|
The next patch will require checking the DejaGnu version. There is
already a test that does this,
gdb.threads/attach-many-short-lived-threads.exp. This patch introduces
a new procedure, dejagnu_version, and makes that test use it.
The version number is "right-padded" with zeroes, to make sure that we
always return a triplet (major, minor, patch).
The procedure does not consider the DejaGnu versions from git. For
example, if you used DejaGnu from its current master branch, the version
would be "1.6.1-git", meaning that 1.6.1 will be the next release. I
figured we'll cross that bridge when (and if) we get there.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (dejagnu_version): New proc.
* gdb.threads/attach-many-short-lived-threads.exp (bad_dejagnu):
Use dejagnu_version.
|
|
For a long time now, c++/8218 has noted that GDB is printing argument types
for destructors:
(gdb) ptype A
type = class A {
public:
~A(int);
}
This happens because cp_type_print_method_args doesn't ignore artificial
arguments. [It ignores the first `this' pointer because it simply skips
the first argument for any non-static function.]
This patch fixes this:
(gdb) ptype A
type = class A {
public:
~A();
}
I've adjusted gdb.cp/templates.exp to account for this and added a new
passing regexp.
gdb/ChangeLog
PR c++/8218
* c-typeprint.c (cp_type_print_method_args): Skip artificial arguments.
gdb/testsuite/ChangeLog
PR c++/8128
* gdb.cp/templates.exp (test_ptype_of_templates): Remove argument
type from destructor regexps.
Add a branch which actually passes the test.
Adjust "ptype t5i" test names.
|
|
Currently diffing testrun results shows:
-PASS: gdb.base/step-over-exit.exp: break *0x7ffff77e18c6 if main == 0
+PASS: gdb.base/step-over-exit.exp: break *0x2aaaab0988c6 if main == 0
gdb/testsuite/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
* gdb.base/step-over-exit.exp: Add explicit test message.
|
|
If you do "interrupt -a" just while some thread is stepping over a
breakpoint, gdb trips on an internal error.
The test added by this patch manages to trigger this consistently by
spawning a few threads that are constantly tripping on a conditional
breakpoint whose condition always evaluates to false. With current
gdb, you get:
~~~
interrupt -a
.../src/gdb/inline-frame.c:343: internal-error: void skip_inline_frames(ptid_t): Assertion `find_inline_frame_state (ptid) == NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=on: iter=0: interrupt -a (GDB internal error)
[...]
.../src/gdb/inline-frame.c:343: internal-error: void skip_inline_frames(ptid_t): Assertion `find_inline_frame_state (ptid) == NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=0: wait for stops (GDB internal error)
~~~
The assertion triggers because we're processing a stop for a thread
that had already stopped before and thus had already its inline-frame
state filled in.
Calling handle_inferior_event_1 directly within a
"thread_stop_requested" observer is something that I've wanted to get
rid of before, for being fragile. Nowadays, infrun is aware of
threads with pending events, so we can use that instead, and let the
normal fetch_inferior_event -> handle_inferior_event code path handle
the forced stop.
The change to finish_step_over is necessary because sometimes a thread
that was told to PTRACE_SINGLESTEP reports back a SIGSTOP instead of a
SIGTRAP (i.e., we tell it to single-step, and then interrupt it quick
enough that on the kernel side the thread dequeues the SIGTOP before
ever having had a chance of executing the instruction to be stepped).
SIGSTOP gets translated to a GDB_SIGNAL_0. And then finish_step_over
would miss calling clear_step_over_info, and thus miss restarting the
other threads (which in this case of threads with pending events,
means setting their "resumed" flag, so their pending events can be
consumed).
And now that we always restart threads in finish_step_over, we no
longer need to do that in handle_signal_stop.
Tested on x86_64 Fedora 23, native and gdbserver.
gdb/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
PR gdb/18360
* infrun.c (start_step_over, do_target_resume, resume)
(restart_threads): Assert we're not resuming a thread that is
meant to be stopped.
(infrun_thread_stop_requested_callback): Delete.
(infrun_thread_stop_requested): If the thread is internally
stopped, queue a pending stop event and clear the thread's
inline-frame state.
(handle_stop_requested): New function.
(handle_syscall_event, handle_inferior_event_1): Use
handle_stop_requested.
(handle_stop_requested): New function.
(handle_signal_stop): Set the thread's stop_signal here instead of
at caller.
(finish_step_over): Clear step over info unconditionally.
(handle_signal_stop): If the user had interrupted the event
thread, consider the stop a random signal.
(handle_signal_stop) <signal arrived while stepping over
breakpoint>: Don't restart threads here.
(stop_waiting): Don't clear step-over info here.
gdb/testsuite/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
PR gdb/18360
* gdb.threads/interrupt-while-step-over.c: New file.
* gdb.threads/interrupt-while-step-over.exp: New file.
|
|
gdb/testsuite/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
* gdb.arch/amd64-entry-value-param-dwarf5.exp: Use with_test_prefix.
* gdb.arch/amd64-entry-value-param.exp: Use with_test_prefix.
|
|
Currently I get:
(gdb) print have_pkru()
$1 = 0
(gdb) FAIL: gdb.arch/i386-pkru.exp: probe PKRU support
UNSUPPORTED: gdb.arch/i386-pkru.exp: processor does not support protection key feature.
Probing suceeded, so that should be a PASS -> UNSUPPORTED.
gdb/testsuite/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
* gdb.arch/i386-pkru.exp (probe PKRU support): Handle detecting
PKRU as not supported as a PASS.
|
|
Avoid putting unstable path names in test messages, in order to avoid
spurious testrun result diffs like:
[....]
-PASS: gdb.base/break-fun-addr.exp: /home/pedro/gdb/test-build1/gdb/testsuite/outputs/gdb.base/break-fun-addr/break-fun-addr1: break *main
+PASS: gdb.base/break-fun-addr.exp: /home/pedro/gdb/test-build2/gdb/testsuite/outputs/gdb.base/break-fun-addr/break-fun-addr1: break *main
[....]
gdb/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
* gdb.base/break-fun-addr.exp: Use $testfile1/$testfile2 for test
prefix instead of $binfile1/$binfile2.
* gdb.btrace/gcore.exp: Use "core" instead of unstable path name
in test message.
* gdb.python/py-completion.exp: Use "load python file" as test
messages instead of unstable path names.
|
|
With commit 3b12939dfc2399 ("Replace the sync_execution global with a
new enum prompt_state tristate"), GDB started aborting if you try
splitting an input line with a continuation char (backslash) while in
a multi-line command:
(gdb) commands
Type commands for breakpoint(s) 1, one per line.
End with a line saying just "end".
>print \
(gdb) 1 # note "(gdb)" incorrectly printed here.
>end
readline: readline_callback_read_char() called with no handler!
$
That abort is actually a symptom of an old problem introduced when
gdb_readline_wrapper was rewritten to use asynchronous readline, back
in 2007. Note how the "(gdb)" prompt is printed above in the "(gdb)
1" line. Clearly it shouldn't be there, but it already was before the
commit mentioned above. Fixing that also fixes the readline abort
shown above.
The problem starts when command_line_input passes a NULL prompt to
gdb_readline_wrapper when it finds previous incomplete input due to a
backslash, trying to fetch more input without printing another ">"
secondary prompt. That itself should not be a problem, because
passing NULL to gdb_readline_wrapper has the same meaning as passing a
pointer to empty string, since gdb_readline_wrapper exposes the same
interface as 'readline(char *)'. However, gdb_readline_wrapper passes
the prompt argument directly to display_gdb_prompt, and for the
latter, a NULL prompt argument has a different meaning - it requests
printing the primary prompt.
Before commit 782a7b8ef9c096 (which rewrote gdb_readline_wrapper to
use asynchronous readline), GDB behaved like this:
(gdb) commands
[....]
>print \
1
>end
(gdb)
The above is what this commit restores GDB back to.
New test included.
gdb/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
PR cli/21218
* top.c (gdb_readline_wrapper): Avoid passing NULL to
display_gdb_prompt.
(command_line_input): Add comment.
gdb/testsuite/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
PR cli/21218
* gdb.base/commands.exp (backslash_in_multi_line_command_test):
New proc.
(top level): Call it.
|
|
Commit d7e747318f4d04 ("Eliminate make_cleanup_ui_file_delete / make
ui_file a class hierarchy") regressed the TUI's command window.
Newlines miss doing a "carriage return", resulting in output like:
~~~~~~~~~~~~~~~~~~
(gdb) helpList of classes of commands:
aliases -- Aliases of other commands
breakpoints -- Making program stop at certain points
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Before the commit mentioned above, the default ui_file->to_write
implementation had a hack that would defer into the ui_file->to_fputs
method. The TUI's ui_file did not implement the to_write method, so
all writes would end up going to the ncurses window via tui_file_fputs
-> tui_puts.
After the commit above, the hack is gone, but the TUI's ui_file still
does not implement the ui_file::write method. Since tui_file inherits
from stdio_file, writing to a tui_file ends up doing fwrite on the
FILE stream the TUI is "associated" with, via stdio_file::write,
instead of writing to the ncurses window.
The fix is to have tui_file override the "write" method.
New test included.
gdb/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
PR tui/21216
* tui/tui-file.c (tui_file::write): New.
* tui/tui-file.h (tui_file): Override "write".
* tui/tui-io.c (do_tui_putc, update_start_line): New functions,
factored out from ...
(tui_puts): ... here.
(tui_putc): Use them.
(tui_write): New function.
* tui/tui-io.h (tui_write): Declare.
gdb/testsuite/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
PR tui/21216
* gdb.tui/tui-nl-filtered-output.exp: New file.
|
|
gdb/testsuite/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
* gdb.base/completion.exp: Move TUI completion tests to ...
* gdb.tui/completion.exp: ... this new file.
|
|
Let's start putting TUI tests in their own dir.
gdb/testsuite/
2017-03-08 Pedro Alves <palves@redhat.com>
* gdb.base/tui-disasm-long-lines.c,
gdb.base/tui-disasm-long-lines.exp, gdb.base/tui-layout.c,
gdb.base/tui-layout.exp: Move to ...
* gdb.tui/: ... this new directory.
|
