aboutsummaryrefslogtreecommitdiff
path: root/gdb/target.h
AgeCommit message (Collapse)AuthorFilesLines
2000-11-21 * target.h (TARGET_SIGNAL_REALTIME_64): Added for IRIX 6.Peter Schauer1-0/+2
* target.c (target_signal_from_host, do_target_signal_to_host): Handle TARGET_SIGNAL_REALTIME_64.
2000-11-03* TODO: Note abstraction layer violation where "ocd reset" commandJ.T. Conklin1-5/+16
must invalidate the dcache, and how this might be fixed. * monitor.c (#include "dcache.h"): Removed. (remote_dcache): Removed. (monitor_open): Removed code that created local dcache. (flush_monitor_dcache): Removed (unused function). (monitor_resume): Removed call to dcache_invd(). (monitor_load): Likewise. (monitor_xfer_memory): Changed to call monitor_write_memory(), monitor_write_memory_block(), and monitor_read_memory() instead of dcache_xfer_memory(). * monitor.h (flush_monitor_dcache): Removed (unused function). * ocd.c (#include "dcache.h"): Removed. (ocd_dcache): Removed. (ocd_open): Removed code that created local dcache. (ocd_resume): Removed call to dcache_invd(). (ocd_xfer_memory): Changed to call ocd_write_bytes() and ocd_read_bytes() instead of dcache_xfer_memory(). (bdm_reset_command): Invalidate target dcache. * remote-bug.c (bug_load): Remove call to dcache_invd(). (bug_resume): Likewise. (bug_settings): Remove dcache, readfunc, and writefunc fields from initializer. (bug_xfer_memory): Changed to call bug_read_memory() and bug_write_memory() instead of dcache_xfer_memory(). * remote-nindy.c (#include "dcache.h"): Removed. (nindy_dcache): Removed. (nindy_open): Removed code that created local dcache. (nindy_resume): Removed call to dcache_invd(). (nindy_load): Likewise. (nindy_xfer_inferior_memory): Changed to call ninMemPut() and ninMemGet() instead of dcache_xfer_memory(). * remote-sds.c (#include "dcache.h"): Removed. (sds_dcache): Removed. (sds_open): Removed code that created local dcache. (sds_resume): Removed call to dcache_invd(). (sds_xfer_memory): Changed to call sds_write_bytes() and sds_read_bytes() instead of dcache_xfer_memory(). * remote-utils.c (gr_open): Removed code that created local dcache. * remote-utils.h (#include "dcache.h"): Removed. (struct gr_settings): Removed dcache, readfunc, and writefunc fields. (gr_get_dcache, gr_set_dcache): Removed macro definitions. * remote.c (#include "dcache.h"): Removed. (remote_dcache): Removed. (remote_open_1): Removed code that created local dcache. (remote_async_open_1): Likewise. (remote_resume): Removed call to dcache_invd(). (remote_async_resume): Likewise. (remote_xfer_memory): Changed to call remote_write_bytes() and remote_read_bytes() instead of dcache_xfer_memory(). * wince.c (#include "dcache.h"): Removed. (remote_dcache): Removed. (child_create_inferior): Removed code that created local dcache. (child_xfer_memory): Changed to call remote_write_bytes() and remote_read_bytes() instead of dcache_xfer_memory(). (child_resume): Removed call to dcache_invd(). * target.c (target_dcache): Added. (target_load): Invalidate target_dcache. (do_xfer_memory): New function. (target_xfer_memory): Reimplement in terms of dcache_xfer_memory(). (target_xfer_memory_partial): Likewise. (initialize_targets): Create target_dcache. * target.h (#include "dcache.h"): Added. (target_open): Invalidate target_dcache. (target_resume): Likewise. (do_xfer_memory): New declaration. * dcache.c (dcache_init): Removed reading and writing arguments. (dcache_struct): Removed read_memory and write_memory fields. (dcache_write_line): Call do_xfer_memory. (dcache_read_line): Likewise. (dcache_xfer_memory): Likewise. (dcache_invalidate): Renamed from dcache_invd. (dcache_init): Updated. (dcache_xfer_memory): Updated. * dcache.h (memxferfunc): Removed definition.
2000-09-02Corrected spelling in comment: dependant -> dependent.David Anderson1-2/+2
2000-06-04Eliminate PARAMS from function pointer declarations.Kevin Buettner1-65/+66
2000-05-28PARAMS removal.Kevin Buettner1-109/+63
2000-05-20* target.h (target_memory_bfd_section): Removed declaration.J.T. Conklin1-5/+0
* target.c (target_memory_bfd_section): Removed. * exec.c (xfer_memory): Removed #if'ed-out code which referenced target_memory_bfd_section. * target.h (target_read_memory_section): Removed declaration. * target.c (target_read_memory_section): Removed. (target_xfer_memory): Update, removed bfd_section argument. (target_read_string, target_read_memory, target_write_memory): Update for above change. * gdbcore.h (read_memory_section): Removed declaration. * corefile.c (read_memory_section): Removed. * jv-lang.c (get_java_utf8_name): Changed calls to read_memory_section to read_memory. * printcmd.c (printf_command): Likewise. * valops.c (value_at, value_fetch_lazy): Likewise.
2000-04-17* remote.c (REMOTE_TRANSLATE_XFER_ADDRESS), mem-break.cAndrew Cagney1-4/+0
(MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT), target.h (BREAKPOINT_FROM_PC), valops.c (COERCE_FLOAT_TO_DOUBLE), gdbarch.sh (D10V_MAKE_DADDR, D10V_MAKE_IADDR, FRAMELESS_FUNCTION_INVOCATION, REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, REGISTER_NAME), findvar.c (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Delete default definition. Handled by gdbarch. * gdbarch.sh: Make multi-arch defaults, defaults for non- multi-arch targets. (REGISTER_NAME, COERCE_FLOAT_TO_DOUBLE, REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, D10V_MAKE_DADDR, D10V_MAKE_IADDR, BREAKPOINT_FROM_PC, MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT, REMOTE_TRANSLATE_XFER_ADDRESS, FRAMELESS_FUNCTION_INVOCATION): Provide default/legacy implementation. (REGISTER_NAMES, CALL_DUMMY): Allow legacy definition. * gdbarch.h, gdbarch.c: Re-generate.
2000-03-15Deal with the inferior unloading shared objects.Jim Blandy1-0/+3
* solib.c (current_sos): New function, replacing find_solib. (find_solib): Deleted. (free_so): New function. (clear_solib): Call free_so, instead of writing it out. (solib_add): Rewritten: compare the inferior's current list of shared objects with GDB's list, and do the required loads and unloads. (info_sharedlibrary_command, solib_address): Don't use find_solib to walk the list of shared libraries: call solib_add, and then walk the list at so_list_head normally. * objfiles.c (free_objfile): Don't call CLEAR_SOLIB, and don't detach the core target. These tasks are taken care of elsewhere. * target.c (remove_target_sections): New function. * target.h (remove_target_sections): New declaration. * solib.c (symbol_add_stub): Check whether we've already created an objfile for this shared object first, before doing all that work to compute section addresses, etc. * objfiles.c (unlink_objfile): Report an internal error if objfile doesn't occur in the object_files list. * solib.c (special_symbol_handling): Delete argument; it's not used. * solib.c (SOLIB_EXTRACT_ADDRESS): New macro to extract addresses from solib structures. Use it throughout solib.c, get rid of all CORE_ADDR casts. (struct so_list): Change type of lmaddr to CORE_ADDR. (first_link_map_member): Change return value type to CORE_ADDR, update callers. (solib_add_common_symbols): Change parameter type to CORE_ADDR, update callers. (open_symbol_file_object, find_solib): Change type of lm variable to CORE_ADDR.
2000-02-02import gdb-2000-02-01 snapshotJason Molenda1-2/+2
2000-01-11import gdb-2000-01-10 snapshotJason Molenda1-178/+192
1999-12-22import gdb-1999-12-21 snapshotJason Molenda1-18/+44
1999-12-14import gdb-1999-12-13 snapshotJason Molenda1-1/+12
1999-12-07import gdb-1999-12-06 snapshotJason Molenda1-2/+23
1999-11-09import gdb-1999-11-08 snapshotJason Molenda1-6/+25
1999-10-19import gdb-1999-10-18 snapshotJason Molenda1-3/+14
1999-10-05import gdb-1999-10-04 snapshotJason Molenda1-1/+18
1999-09-28import gdb-1999-09-28 snapshotJason Molenda1-4/+15
1999-09-09import gdb-1999-09-08 snapshotStan Shebs1-1/+8
1999-08-09import gdb-1999-08-09 snapshotJason Molenda1-0/+9
1999-07-07import gdb-1999-07-07 post reformatJason Molenda1-329/+338
1999-07-05import gdb-1999-07-05 snapshotJason Molenda1-0/+5
1999-05-11import gdb-1999-05-10Stan Shebs1-2/+11
1999-05-05import gdb-19990504 snapshotStan Shebs1-0/+9
1999-04-26import gdb-19990422 snapshotStan Shebs1-6/+10
1999-04-16Initial creation of sourceware repositorygdb-4_18-branchpointStan Shebs1-0/+1264
1999-04-16Initial creation of sourceware repositoryStan Shebs1-1264/+0
1999-01-19only declare child_post_attach if CHILD_POST_ATTACH is defined.David Taylor1-0/+2
1999-01-151999-01-15 Fernando Nasser <fnasser@totem.to.cygnus.com>Fernando Nasser1-0/+11
* target.h: added entry for target queries (to_query) target.c: ditto.
1999-01-13Wed Jan 13 14:59:02 1999 Michael Snyder <msnyder@cleaver.cygnus.com>Michael Snyder1-0/+17
* infrun.c (set/show scheduler-locking) New command. Set a mode bit that will control how GDB attempts to control thread scheduling for step, continue, etc. (resume): make use of the schedule-locking mode. * target.h (struct target_ops): new field to_has_thread_control. * sol-thread.c: initialize target_ops to_has_thread_control. * procfs.c: ditto. * target.c: ditto. * m3-nat.c: ditto. * remote.c: ditto. * hpux-thread.c: ditto.
1998-12-28hp merge changes -- too numerous to mention here; see ChangeLog andDavid Taylor1-15/+452
ChangeLog-gdbtk for details.
1998-02-12Add a new target specific protocol `target d10v' implemented inAndrew Cagney1-3/+7
remote-d10v.c. It has an xfer_mem function that can translate a d10v GDB address into a d10v monitor address.
1997-04-28 * breakpoint.c (remove_breakpoint): Pass correct type toMark Alexander1-16/+30
target_remove_watchpoint. * target.h: Improve comment for target_{remove,insert}_breakpoint.
1996-07-17Changes from the FSF for Hurd thread support.Stu Grossman1-0/+8
1996-06-28 * remote-e7000.c,remote.c,target.h,top.c:Dawn Perchik1-1/+62
Add set option "remote_timeout" for setting remote_timeout. Add set option "use_hard_breakpoints" for setting hardware .vs. memory breakpoints.
1995-05-22 * breakpoint.c, target.h: Move defaults of watchpoint relatedJim Kingdon1-33/+105
macros back to breakpoint.c. Required to get GDB compiling on Solaris again.
1994-05-13 gcc -Wall lint:Jim Kingdon1-4/+4
* breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-03-03 * breakpoint.c, breakpoint.h, c-valprint.c, ch-valprint.c,Jim Kingdon1-1/+6
cp-valprint.c, eval.c, expprint.c, findvar.c, language.c, objfiles.h, infcmd.c, printcmd.c, stack.c, typeprint.c, valarith.c, valops.c, valprint.c, value.h, values.c: Replace value with value_ptr. This is for the ptx compiler. * objfiles.h, target.h: Don't declare a "sec_ptr" field using a "sec_ptr" typedef. * symm-nat.c: Add a bunch of stuff for symmetry's ptrace stuff. #if 0 i386_float_info. * symm-tdep.c (round): Remove. Also remove sgttyb. * symm-tdep.c: Remove lots of stuff which duplicates stuff from i386-tdep.c. Remove register_addr and ptx_coff_regno_to_gdb. * i386-tdep.c (i386_frame_find_saved_regs): Put in I386_REGNO_TO_SYMMETRY check in case it is needed for Dynix someday. * config/i386/nm-symmetry.h: Change KERNEL_U_ADDR. Move stuff from PTRACE_READ_REGS, PTRACE_WRITE_REGS macros to symm-nat.c. Define CHILD_WAIT and declare child_wait(). * config/i386/tm-symmetry.h: Remove call function stuff; stuff in tm-i386v.h is apparently OK. * config/i386/xm-symmetry.h [_SEQUENT_]: Define HAVE_TERMIOS not HAVE_TERMIO. Define MEM_FNS_DECLARED, NEED_POSIX_SETPGID, and USE_O_NOCTTY.
1994-03-01 * target.c, target.h (target_read_string): Provide error detection toJim Kingdon1-2/+1
caller. Put string in malloc'd space, so caller need not impose arbitrary limits. * solib.c (find_solib): Update to use new interface. * irix5-nat.c (find_solib): Read o_path from inferior (clear_solib): Free storage for o_path. * valprint.c (val_print_string): Add comments.
1994-02-26 * remote.c, remote-mon.c, remote-utils.c, remote-utils.h,Jim Kingdon1-4/+29
target.h, remote-es.c, remote-nindy.c: Don't set baud rate if baud_rate is -1. Remove sr_get_baud_rate and sr_set_baud_rate; just use the global variable itself. When printing baud rate, don't print a baud rate if baud_rate is -1.
1994-01-06 * target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS.Jim Kingdon1-4/+18
* target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook. * infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with code which looks for those two waitkinds. Use switch statement. * config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with CHILD_SPECIAL_WAITSTATUS.
1994-01-04 * target.h: Add enum target_waitkind, enum target_signal, andJim Kingdon1-9/+140
struct target_waitstatus. Change status argument to target_wait to be struct target_waitstatus * instead of int *. * target.h, infrun.c, all targets: Change type of signal arguments to resume(), proceed(), and target_resume() from int to enum target_signal. * All targets (*_wait, *_resume): Change accordingly. * infcmd.c (program_info, signal_command), throughout infrun.c, * fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff. * convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex signal code stuff right with the new signals would be non-trivial). * inferior.h (stop_signal): Make it enum target_signal not int. * target.c, target.h (target_signal_to_string, target_signal_to_name, target_signal_from_name): New functions. * inftarg.c, target.h (target_signal_to_host, target_signal_from_host, store_waitstatus): New functions. * procfs.c (procfs_notice_signals): Use them. * i960-tdep.c (i960_fault_to_signal): New function, to replace print_fault. * config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
1993-10-08 * config/h8300/tm-h8300.h: Don't define sr_get_debug.Jim Kingdon1-22/+71
* remote-sim.c: Include remote-utils.h. * target.h: Add comment about target_has_execution.
1992-09-26Split non-target-dependent code out of target_attach routines.John Gilmore1-1/+19
* target.h: Comments on target_attach args and results. * infcmd.c (attach_command): Check for existing execution, call target_attach, set up terminal status and wait_for_inferior, wait for the attach status, and do normal_stop. * inftarg.c (child_attach): Remove target independent stuff. * remote-adapt.c (adapt_attach): Ditto. * remote-mm.c (mm_attach): Ditto. * remote-udi.c (udi_attach): Ditto. * remote-vx.c (vx_attach): Ditto. Cleanup. * remote-hms.c (hms_attach): Remove completely, it was useless. * remote-mm.c, remote-hms.c, remote-udi.c, remote-adapt.c: Remove commented-out start_remote calls. * remote-hms.c, remote-adapt.c, remote-mm.c, remote-udi.c: Remove DENTER and DEXIT macros and their calls. Use a real debugger -- like gdb -- to see what functions are being called when.
1992-09-18* target.h (struct target_ops): removed to_convert_to_virtual andJohn Gilmore1-22/+5
to_convert_from_virtual elements. Initializations removed from all static initializations. (target_convert_to_virtual, target_convert_from_virtual): removed. (host_convert_to_virtual, host_convert_from_virtual): Removed forward declarations. * target.c (cleanup_target): removed default assignments for to_convert_to_virtual and to_convert_from_virtual. * inftarg.c (host_convert_to_virtual, host_convert_from_virtual): removed. * findvar.c (value_of_register, value_from_register): target_convert_to_virtual inlined. * infcmd.c (do_registers_info): target_convert_to_virtual inlined. * valops.c (value_assign): target_convert_from_virtual inlined.
1992-02-21* environ.h, expression.h, frame.h, gdbcmd.h, gdbcore.h,John Gilmore1-138/+137
inferior.h, language.h, signame.h, target.h, terminal.h, tm-68k.h, tm-i386v.h, tm-sparc.h, tm-sun386.h, tm-symmetry.h, xm-i386v.h, xm-sparc.h: Prototypes for all external functions. Lint.
1991-04-19*** empty log message ***Jim Kingdon1-1/+10
1991-03-28Initial revisionK. Richard Pixley1-0/+406
generated by cgit v1.1 at 2025-01-08 06:09:38 +0000