| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Constify the input parameters of the various auxv parse functions, they
don't need to modify the raw auxv data.
Change-Id: I13eacd5ab8e925ec2b5c1f7722cbab39c41516ec
|
|
The target_ops parameters here can be made const.
Change-Id: Ibc18b17d6b21d06145251a03e68aca90538117d6
|
|
Converting from free-form macros to an enum gives a bit of type-safety.
This caught places where we would assign host error numbers to what
should contain a target fileio error number, for instance in
target_fileio_pread.
I added the FILEIO_SUCCESS enumerator, because
remote.c:remote_hostio_parse_result initializes the remote_errno output
variable to 0. It seems better to have an explicit enumerator than to
assign a value for which there is no enumerator. I considered
initializing this variable to FILEIO_EUNKNOWN instead, such that if the
remote side replies with an error and omits the errno value, we'll get
an errno that represents an error instead of 0 (which reprensents no
error). But it's not clear what the consequences of that change would
be, so I prefer to err on the side of caution and just keep the existing
behavior (there is no intended change in behavior with this patch).
Note that remote_hostio_parse_resul still reads blindly what the remote
side sends as a target errno into this variable, so we can still end up
with a nonsensical value here. It's not good, but out of the scope of
this patch.
Convert host_to_fileio_error and fileio_errno_to_host to return / accept
a fileio_error instead of an int, and cascade the change in the whole
chain that uses that.
Change-Id: I454b0e3fcf0732447bc872252fa8e57d138b0e03
|
|
This changes the parameter of target_ops::async from int to bool.
Regression tested on x86-64 Fedora 34.
|
|
This changes target_pid_to_exec_file and target_ops::pid_to_exec_file
to return a "const char *". I couldn't build many of these targets,
but did examine the code by hand -- also, as this only affects the
return type, it's normally pretty safe. This brings gdb and gdbserver
a bit closer, and allows for the removal of a const_cast as well.
|
|
The current target_resume interface is a bit odd & non-intuitive.
I've found myself explaining it a couple times the recent past, while
reviewing patches that assumed STEP/SIGNAL always applied to the
passed in PTID. It goes like this today:
- if the passed in PTID is a thread, then the step/signal request is
for that thread.
- otherwise, if PTID is a wildcard (all threads or all threads of
process), the step/signal request is for inferior_ptid, and PTID
indicates which set of threads run free.
Because GDB always switches the current thread to "leader" thread
being resumed/stepped/signalled, we can simplify this a bit to:
- step/signal are always for inferior_ptid.
- PTID indicates the set of threads that run free.
Still not ideal, but it's a minimal change and at least there are no
special cases this way.
That's what this patch does. It renames the PTID parameter to
SCOPE_PTID, adds some assertions to target_resume, and tweaks
target_resume's description. In addition, it also renames PTID to
SCOPE_PTID in the remote and linux-nat targets, and simplifies their
implementation a little bit. Other targets could do the same, but
they don't have to.
Change-Id: I02a2ec2ab3a3e9b191de1e9a84f55c17cab7daaf
|
|
This moves the two overloads of target_read_string to a new file,
target/target.c, and updates both gdb and gdbserver to build this.
|
|
While working on the disassembler I was getting frustrated. Every
time I touched disasm.h it seemed like every file in GDB would need to
be rebuilt. Surely the disassembler can't be required by that many
parts of GDB, right?
Turns out that disasm.h is included in target.h, so pretty much every
file was being rebuilt!
The only thing from disasm.h that target.h needed is the
gdb_disassembly_flag enum, as this is part of the target_ops api.
In this commit I move gdb_disassembly_flag into its own file. This is
then included in target.h and disasm.h, after which, the number of
files that depend on disasm.h is much reduced.
I also audited all the other includes of disasm.h and found that the
includes in mep-tdep.c and python/py-registers.c are no longer needed,
so I've removed these.
Now, after changing disasm.h, GDB rebuilds much quicker.
There should be no user visible changes after this commit.
|
|
The enable_btrace target method takes a ptid_t to identify the thread on
which tracing shall be enabled.
Change this to thread_info * to avoid translating back and forth between
the two. This will be used in a subsequent patch.
|
|
This introduces target_announce_attach, by analog with
target_announce_detach. Then it converts existing targets to use
this, rather than emitting their own output by hand.
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
While working on a later patch that required me to understand how GDB
starts up inferiors, I was confused by the
target_ops::post_startup_inferior method.
The post_startup_inferior target function is only called from
inf_ptrace_target::create_inferior.
Part of the target class hierarchy looks like this:
inf_child_target
|
'-- inf_ptrace_target
|
|-- linux_nat_target
|
|-- fbsd_nat_target
|
|-- nbsd_nat_target
|
|-- obsd_nat_target
|
'-- rs6000_nat_target
Every sub-class of inf_ptrace_target, except rs6000_nat_target,
implements ::post_startup_inferior. The rs6000_nat_target picks up
the implementation of ::post_startup_inferior not from
inf_ptrace_target, but from inf_child_target.
No descendent of inf_child_target, outside the inf_ptrace_target
sub-tree, implements ::post_startup_inferior, which isn't really
surprising, as they would never see the method called (remember, the
method is only called from inf_ptrace_target::create_inferior).
What I find confusing is the role inf_child_target plays in
implementing, what is really a helper function for just one of its
descendents.
In this commit I propose that we formally make ::post_startup_inferior
a helper function of inf_ptrace_target. To do this I will remove the
::post_startup_inferior from the target_ops API, and instead make this
a protected, pure virtual function on inf_ptrace_target.
I'll remove the empty implementation of ::post_startup_inferior from
the inf_child_target class, and add a new empty implementation to the
rs6000_nat_target class.
All the other descendents of inf_ptrace_target already provide an
implementation of this method and so don't need to change beyond
making the method protected within their class declarations.
To me, this makes much more sense now. The helper function, which is
only called from within the inf_ptrace_target class, is now a part of
the inf_ptrace_target class.
The only way in which this change is visible to a user is if the user
turns on 'set debug target 1'. With this debug flag on, prior to this
patch the user would see something like:
-> native->post_startup_inferior (...)
<- native->post_startup_inferior (2588939)
After this patch these lines are no longer present, as the
post_startup_inferior is no longer a top level target method. For me,
this is an acceptable change.
|
|
There are a few places where we call the target_ops::can_async_p
member function directly, instead of using the target_can_async_p
wrapper.
In some of these places this is because we need to ask before the
target has been pushed, and in another location (in target.c) it seems
unnecessary to go through the wrapper when we are already in target.c
code.
However, in the next commit I'd like to hoist some common checks out
of target specific code into target.c. To achieve this, in this
commit, I introduce a new overload of target_can_async_p which takes a
target_ops pointer, and calls the ::can_async_p method directly. I
then make use of the new overload where appropriate.
There should be no user visible changes after this commit.
|
|
This started out as changing thread_info::name to a unique_xmalloc_ptr.
That showed that almost all users of that field had the same logic to
get a thread's name: use thread_info::name if non-nullptr, else ask the
target. Factor out this logic in a new thread_name free function. Make
the field private (rename to m_name) and add some accessors.
Change-Id: Iebdd95f4cd21fbefc505249bd1d05befc466a2fc
|
|
get_ada_task_ptid currently takes a 'long' as its 'thread' parameter
type. However, on some platforms this is actually a pointer, and
using 'long' can sometimes end up with the value being sign-extended.
This sign extension can cause problems later, if the tid is then later
used as an address again.
This patch changes the parameter type to ULONGEST and updates all the
uses. This approach preserves sign extension on the targets where it
is apparently intended, while avoiding it on others.
Co-Authored-By: John Baldwin <jhb@FreeBSD.org>
|
|
In the context of ROCm-gdb [1], the ROCm target sits on top of the
linux-nat target. when a process forks, it needs to carry over some
data from the forking inferior to the fork child inferior. Ideally, the
ROCm target would implement the follow_fork target_ops method, but there
are some small problems. This patch fixes these, which helps the ROCm
target, but also makes things more consistent and a bit nicer in
general, I believe.
The main problem is: when follow-fork-mode is "parent",
target_follow_fork is called with the parent as the current inferior.
When it's "child", target_follow_fork is called with the child as the
current inferior. This means that target_follow_fork is sometimes
called on the parent's target stack and sometimes on the child's target
stack.
The parent's target stack may contain targets above the process target,
such as the ROCm target. So if follow-fork-child is "parent", the ROCm
target would get notified of the fork and do whatever is needed. But
the child's target stack, at that moment, only contains the exec and
process target copied over from the parent. The child's target stack is
set up by follow_fork_inferior, before calling target_follow_fork. In
that case, the ROCm target wouldn't get notified of the fork.
For consistency, I think it would be good to always call
target_follow_fork on the parent inferior's target stack. I think it
makes sense as a way to indicate "this inferior has called fork, do
whatever is needed". The desired outcome of the fork (whether an
inferior is created for the child, do we need to detach from the child)
can be indicated by passed parameter.
I therefore propose these changes:
- make follow_fork_inferior always call target_follow_fork with the
parent as the current inferior. That lets all targets present on the
parent's target stack do some fork-related handling and push
themselves on the fork child's target stack if needed.
For this purpose, pass the child inferior down to target_follow_fork
and follow_fork implementations. This is nullptr if no inferior is
created for the child, because we want to detach from it.
- as a result, in follow_fork_inferior, detach from the parent inferior
(if needed) only after the target_follow_fork call. This is needed
because we want to call target_follow_fork before the parent's
target stack is torn down.
- hand over to the targets in the parent's target stack (including the
process target) the responsibility to push themselves, if needed, to
the child's target stack. Also hand over the responsibility to the
process target, at the same time, to create the child's initial
thread (just like we do for follow_exec).
- pass the child inferior to exec_on_vfork, so we don't need to swap
the current inferior between parent and child. Nothing in
exec_on_vfork depends on the current inferior, after this change.
Although this could perhaps be replaced with just having the exec
target implement follow_fork and push itself in the child's target
stack, like the process target does... We would just need to make
sure the process target calls beneath()->follow_fork(...). I'm not
sure about this one.
gdb/ChangeLog:
* target.h (struct target_ops) <follow_fork>: Add inferior*
parameter.
(target_follow_fork): Likewise.
* target.c (default_follow_fork): Likewise.
(target_follow_fork): Likewise.
* fbsd-nat.h (class fbsd_nat_target) <follow_fork>: Likewise.
(fbsd_nat_target::follow_fork): Likewise, and call
inf_ptrace_target::follow_fork.
* linux-nat.h (class linux_nat_target) <follow_fork>: Likewise.
* linux-nat.c (linux_nat_target::follow_fork): Likewise, and
call inf_ptrace_target::follow_fork.
* obsd-nat.h (obsd_nat_target) <follow_fork>: Likewise.
* obsd-nat.c (obsd_nat_target::follow_fork): Likewise, and call
inf_ptrace_target::follow_fork.
* remote.c (class remote_target) <follow_fork>: Likewise.
(remote_target::follow_fork): Likewise, and call
process_stratum_target::follow_fork.
* process-stratum-target.h (class process_stratum_target)
<follow_fork>: New.
* process-stratum-target.c
(process_stratum_target::follow_fork): New.
* target-delegates.c: Re-generate.
[1] https://github.com/ROCm-Developer-Tools/ROCgdb
Change-Id: I460bd0af850f0485e8aed4b24c6d8262a4c69929
|
|
This is a small cleanup I think would be nice, that I spotted while
doing the following patch.
gdb/ChangeLog:
* target.h (struct target_ops) <follow_fork>: Add ptid and
target_waitkind parameters.
(target_follow_fork): Likewise.
* target.c (default_follow_fork): Likewise.
(target_follow_fork): Likewise.
* fbsd-nat.h (class fbsd_nat_target) <follow_fork>: Likewise.
* fbsd-nat.c (fbsd_nat_target::follow_fork): Likewise.
* linux-nat.h (class linux_nat_target) <follow_fork>: Likewise.
* linux-nat.c (linux_nat_target::follow_fork): Likewise.
* obsd-nat.h (class obsd_nat_target) <follow_fork>: Likewise.
* obsd-nat.c (obsd_nat_target::follow_fork): Likewise.
* remote.c (class remote_target) <follow_fork>: Likewise.
* target-debug.h (target_debug_print_target_waitkind): New.
* target-delegates.c: Re-generate.
Change-Id: I5421a542f2e19100a22b74cc333d2b235d0de3c8
|
|
Commit 408f66864a1a823591b26420410c982174c239a2 ("detach in all-stop
with threads running") regressed "detach" with "target remote":
(gdb) detach
Detaching from program: target:/any/program, process 3671843
Detaching from process 3671843
Ending remote debugging.
[Inferior 1 (process 3671843) detached]
In main
terminate called after throwing an instance of 'gdb_exception_error'
Aborted (core dumped)
Here's the exception above being thrown:
(top-gdb) bt
#0 throw_error (error=TARGET_CLOSE_ERROR, fmt=0x555556035588 "Remote connection closed") at src/gdbsupport/common-exceptions.cc:222
#1 0x0000555555bbaa46 in remote_target::readchar (this=0x555556a11040, timeout=10000) at src/gdb/remote.c:9440
#2 0x0000555555bbb9e5 in remote_target::getpkt_or_notif_sane_1 (this=0x555556a11040, buf=0x555556a11058, forever=0, expecting_notif=0, is_notif=0x0) at src/gdb/remote.c:9928
#3 0x0000555555bbbda9 in remote_target::getpkt_sane (this=0x555556a11040, buf=0x555556a11058, forever=0) at src/gdb/remote.c:10030
#4 0x0000555555bc0e75 in remote_target::remote_hostio_send_command (this=0x555556a11040, command_bytes=13, which_packet=14, remote_errno=0x7fffffffcfd0, attachment=0x0, attachment_len=0x0) at src/gdb/remote.c:12137
#5 0x0000555555bc1b6c in remote_target::remote_hostio_close (this=0x555556a11040, fd=8, remote_errno=0x7fffffffcfd0) at src/gdb/remote.c:12455
#6 0x0000555555bc1bb4 in remote_target::fileio_close (During symbol reading: .debug_line address at offset 0x64f417 is 0 [in module build/gdb/gdb]
this=0x555556a11040, fd=8, remote_errno=0x7fffffffcfd0) at src/gdb/remote.c:12462
#7 0x0000555555c9274c in target_fileio_close (fd=3, target_errno=0x7fffffffcfd0) at src/gdb/target.c:3365
#8 0x000055555595a19d in gdb_bfd_iovec_fileio_close (abfd=0x555556b9f8a0, stream=0x555556b11530) at src/gdb/gdb_bfd.c:439
#9 0x0000555555e09e3f in opncls_bclose (abfd=0x555556b9f8a0) at src/bfd/opncls.c:599
#10 0x0000555555e0a2c7 in bfd_close_all_done (abfd=0x555556b9f8a0) at src/bfd/opncls.c:847
#11 0x0000555555e0a27a in bfd_close (abfd=0x555556b9f8a0) at src/bfd/opncls.c:814
#12 0x000055555595a9d3 in gdb_bfd_close_or_warn (abfd=0x555556b9f8a0) at src/gdb/gdb_bfd.c:626
#13 0x000055555595ad29 in gdb_bfd_unref (abfd=0x555556b9f8a0) at src/gdb/gdb_bfd.c:715
#14 0x0000555555ae4730 in objfile::~objfile (this=0x555556515540, __in_chrg=<optimized out>) at src/gdb/objfiles.c:573
#15 0x0000555555ae955a in std::_Sp_counted_ptr<objfile*, (__gnu_cxx::_Lock_policy)2>::_M_dispose (this=0x555556c20db0) at /usr/include/c++/9/bits/shared_ptr_base.h:377
#16 0x000055555572b7c8 in std::_Sp_counted_base<(__gnu_cxx::_Lock_policy)2>::_M_release (this=0x555556c20db0) at /usr/include/c++/9/bits/shared_ptr_base.h:155
#17 0x00005555557263c3 in std::__shared_count<(__gnu_cxx::_Lock_policy)2>::~__shared_count (this=0x555556bf0588, __in_chrg=<optimized out>) at /usr/include/c++/9/bits/shared_ptr_base.h:730
#18 0x0000555555ae745e in std::__shared_ptr<objfile, (__gnu_cxx::_Lock_policy)2>::~__shared_ptr (this=0x555556bf0580, __in_chrg=<optimized out>) at /usr/include/c++/9/bits/shared_ptr_base.h:1169
#19 0x0000555555ae747e in std::shared_ptr<objfile>::~shared_ptr (this=0x555556bf0580, __in_chrg=<optimized out>) at /usr/include/c++/9/bits/shared_ptr.h:103
#20 0x0000555555b1c1dc in __gnu_cxx::new_allocator<std::_List_node<std::shared_ptr<objfile> > >::destroy<std::shared_ptr<objfile> > (this=0x5555564cdd60, __p=0x555556bf0580) at /usr/include/c++/9/ext/new_allocator.h:153
#21 0x0000555555b1bb1d in std::allocator_traits<std::allocator<std::_List_node<std::shared_ptr<objfile> > > >::destroy<std::shared_ptr<objfile> > (__a=..., __p=0x555556bf0580) at /usr/include/c++/9/bits/alloc_traits.h:497
#22 0x0000555555b1b73e in std::__cxx11::list<std::shared_ptr<objfile>, std::allocator<std::shared_ptr<objfile> > >::_M_erase (this=0x5555564cdd60, __position=std::shared_ptr<objfile> (expired, weak count 1) = {get() = 0x555556515540}) at /usr/include/c++/9/bits/stl_list.h:1921
#23 0x0000555555b1afeb in std::__cxx11::list<std::shared_ptr<objfile>, std::allocator<std::shared_ptr<objfile> > >::erase (this=0x5555564cdd60, __position=std::shared_ptr<objfile> (expired, weak count 1) = {get() = 0x555556515540}) at /usr/include/c++/9/bits/list.tcc:158
#24 0x0000555555b19576 in program_space::remove_objfile (this=0x5555564cdd20, objfile=0x555556515540) at src/gdb/progspace.c:210
#25 0x0000555555ae4502 in objfile::unlink (this=0x555556515540) at src/gdb/objfiles.c:487
#26 0x0000555555ae5a12 in objfile_purge_solibs () at src/gdb/objfiles.c:875
#27 0x0000555555c09686 in no_shared_libraries (ignored=0x0, from_tty=1) at src/gdb/solib.c:1236
#28 0x00005555559e3f5f in detach_command (args=0x0, from_tty=1) at src/gdb/infcmd.c:2769
So frame #28 already detached the remote process, and then we're
purging the shared libraries. GDB had opened remote shared libraries
via the target: sysroot, so it tries closing them. GDBserver is
tearing down already, so remote communication breaks down and we close
the remote target and throw TARGET_CLOSE_ERROR.
Note frame #14:
#14 0x0000555555ae4730 in objfile::~objfile (this=0x555556515540, __in_chrg=<optimized out>) at src/gdb/objfiles.c:573
That's a dtor, thus noexcept. That's the reason for the
std::terminate.
Stepping back a bit, why do we still have open remote files if we've
managed to detach already, and, we're debugging with "target remote"?
The reason is that commit 408f66864a1a823591b26420410c982174c239a2
makes detach_command hold a reference to the target, so the remote
target won't be finally closed until frame #28 returns. It's closing
the target that invalidates target file I/O handles.
This commit fixes the issue by not relying on target_close to
invalidate the target file I/O handles, instead invalidate them
immediately in remote_unpush_target. So when GDB purges the solibs,
and we end up in target_fileio_close (frame #7 above), there's nothing
to do, and we don't try to talk with the remote target anymore.
The regression isn't seen when testing with
--target_board=native-gdbserver, because that does "set sysroot" to
disable the "target:" sysroot, for test run speed reasons. So this
commit adds a testcase that explicitly tests detach with "set sysroot
target:".
gdb/ChangeLog:
yyyy-mm-dd Pedro Alves <pedro@palves.net>
PR gdb/28080
* remote.c (remote_unpush_target): Invalidate file I/O target
handles.
* target.c (fileio_handles_invalidate_target): Make extern.
* target.h (fileio_handles_invalidate_target): Declare.
gdb/testsuite/ChangeLog:
yyyy-mm-dd Pedro Alves <pedro@palves.net>
PR gdb/28080
* gdb.base/detach-sysroot-target.exp: New.
* gdb.base/detach-sysroot-target.c: New.
Reported-By: Jonah Graham <jonah@kichwacoders.com>
Change-Id: I851234910172f42a1b30e731161376c344d2727d
|
|
In a linux kernel mailing list discussion, it was mentioned that "gdb has
this odd thing where it takes the 64-bit vs 32-bit data for the whole process
from one thread, and picks the worst possible thread to do it (ie explicitly
not even the main thread, ...)" [1].
The picking of the thread is done here in
x86_linux_nat_target::read_description:
...
/* GNU/Linux LWP ID's are process ID's. */
tid = inferior_ptid.lwp ();
if (tid == 0)
tid = inferior_ptid.pid (); /* Not a threaded program. */
...
To understand what this code does, let's investigate a scenario in which
inferior_ptid.lwp () != inferior_ptid.pid ().
Say we start exec jit-attach-pie, identified with pid x. The main thread
starts another thread that sleeps, and then the main thread waits for the
sleeping thread. So we have two threads, identified with LWP IDs x and x+1:
...
PID LWP CMD
x x ./jit-attach-pie
x x+1 ./jit-attach-pie
...
[ The thread with LWP x is known as the thread group leader. ]
When attaching to this exec using the pid, gdb does a stop_all_threads which
iterates over all the threads, first LWP x, and then LWP x+1.
So the state we arrive with at x86_linux_nat_target::read_description is:
...
(gdb) p inferior_ptid
$1 = {m_pid = x, m_lwp = x+1, m_tid = 0}
...
and consequently we probe 64/32-bitness from thread LWP x+1.
[ Note that this is different from when gdb doesn't attach but instead
launches the exec itself, in which case there's just one thread to begin with,
and consequently the probed thread is LWP x. ]
According to aforementioned remark, a better choice would have been the main
thread, that is, LWP x.
This patch implement that choice, by simply doing:
...
tid = inferior_ptid.pid ();
...
The fact that gdb makes a per-process permanent choice for 64/32-bitness is a
problem in itself: each thread can be in either 64 or 32 bit mode, and change
forth and back. That is a problem that this patch doesn't fix.
Now finally: why does this matter in the context of the linux kernel
discussion? The discussion was related to a patch that exposed io_uring
threads to user-space. This made it possible that one of those threads would
be picked out to select 64/32-bitness. Given that such threads are atypical
user-space threads in the sense that they don't return to user-space and don't
have a userspace register state, reading their registers returns garbage, and
so it could f.i. occur that in a 64-bit process with all normal user-space
threads in 64-bit mode, the probing would return 32-bit.
It may be that this is worked-around on the kernel side by providing userspace
register state in those threads such that current gdb is happy. Nevertheless,
it seems prudent to fix this on the gdb size as well.
Tested on x86_64-linux.
[1] https://lore.kernel.org/io-uring/CAHk-=wh0KoEZXPYMGkfkeVEerSCEF1AiCZSvz9TRrx=Kj74D+Q@mail.gmail.com/
gdb/ChangeLog:
2021-05-23 Tom de Vries <tdevries@suse.de>
PR tdep/27822
* target.h (struct target_ops): Mention target_thread_architecture in
read_description comment.
* x86-linux-nat.c (x86_linux_nat_target::read_description): Use
pid to determine if process is 64-bit or 32-bit.
* aarch64-linux-nat.c (aarch64_linux_nat_target::read_description):
Same.
* ppc-linux-nat.c (ppc_linux_nat_target::read_description): Same.
* riscv-linux-nat.c (riscv_linux_nat_target::read_description): Same.
* s390-linux-nat.c (s390_linux_nat_target::read_description): Same.
* arm-linux-nat.c (arm_linux_nat_target::read_description): Same.
Likewise, use pid to determine if kernel supports reading VFP
registers.
|
|
target_ops::follow_exec
On "exec", some targets need to unpush themselves from the inferior,
and do some bookkeeping, like forgetting the data associated to the
exec'ing inferior.
One such example is the thread-db target. It does so in
a special case in thread_db_target::wait, just before returning the
TARGET_WAITKIND_EXECD event to its caller.
We have another such case in the context of rocm-gdb [1], where the
"rocm" target is pushed on top of the linux-nat target. When an exec
happens, we want to unpush the rocm target from the exec'ing inferior to
close some file descriptors that refer to the pre-exec address space and
forget about that inferior. We then want to push the target on the
inferior in which execution continues, to open the file descriptors for
the post-exec address space.
I think that a good way to address this cleanly is to do all this in the
target_ops::follow_exec implementations. Make the
process_stratum_target::follow_exec implementation have the default
behavior of pushing itself to the new inferior's target stack (if
execution continues in a new inferior) and add the initial thread.
remote_target::follow_exec is an example of process target that wants to
do a bit more than the default behavior. So it calls
process_stratum_target::follow_exec first and does the extra work
second.
linux-thread-db (a non-process target) implements follow_exec to do some
bookeeping (forget about that process' data), before handing down the
event down to the process target (which hits
process_stratum_target::follow_exec).
gdb/ChangeLog:
* target.h (struct target_ops) <follow_exec>: Add ptid_t
parameter.
(target_follow_exec): Likewise.
* target.c (target_follow_exec): Add ptid_t parameter.
* infrun.c (follow_exec): Adjust call to target_follow_exec,
don't push target nor create thread.
* linux-thread-db.c (class thread_db_target) <follow_exec>: New.
(thread_db_target::wait): Just return on TARGET_WAITKIND_EXECD.
(thread_db_target::follow_exec): New.
* remote.c (class remote_target) <follow_exec>: Add ptid_t parameter.
(remote_target::follow_exec): Call
process_stratum_target::follow_exec.
* target-delegates.c: Re-generate.
Change-Id: I3f96d0ba3ea0dde6540b7e1b4d5cdb01635088c8
|
|
target_follow_exec is currently only called in the "follow-exec-mode ==
new" branch of follow_exec, not the "follow-exec-mode == same" branch.
I think it would make sense to call it regardless of the mode to let
targets do some necessary handling.
This is needed in the context of rocm-gdb [1], where a target is pushed
on top of the linux-nat target. On exec, it needs to do some
bookkeeping, close some file descriptors / handles that were related to
the process pre-exec and open some new ones for the process post-exec.
However, by looking at the only in-tree implementation of
target_ops::follow_exec, remote_target::follow_exec, I found that it
would be useful for the extended-remote target too, to align its
behavior with native debugging (although I think that behavior is not
very user-friendly, see PR 27745 [2]).
Using two programs, one (let's call it "execer") that execs the other
(let's call it "execee"), with native:
$ ./gdb -q -nx --data-directory=data-directory ./execer
Reading symbols from ./execer...
(gdb) r
Starting program: /home/simark/build/binutils-gdb/gdb/execer
I am execer
process 1495622 is executing new program: /home/simark/build/binutils-gdb/gdb/execee
I am execee
[Inferior 1 (process 1495622) exited normally]
(gdb) r
Starting program: /home/simark/build/binutils-gdb/gdb/execee
I am execee
[Inferior 1 (process 1495626) exited normally]
And now with gdbserver (some irrelevant output lines removed for brevity):
$ ./gdbserver --once --multi :1234
...
$ ./gdb -q -nx --data-directory=data-directory ./execer -ex "set remote exec-file /home/simark/build/binutils-gdb/gdb/execer" -ex "tar ext :1234"
Reading symbols from ./execer...
Remote debugging using :1234
(gdb) r
Starting program: /home/simark/build/binutils-gdb/gdb/execer
process 1495724 is executing new program: /home/simark/build/binutils-gdb/gdb/execee
[Inferior 1 (process 1495724) exited normally]
(gdb) r
`target:/home/simark/build/binutils-gdb/gdb/execee' has disappeared; keeping its symbols.
Starting program: target:/home/simark/build/binutils-gdb/gdb/execee
warning: Build ID mismatch between current exec-file target:/home/simark/build/binutils-gdb/gdb/execee
and automatically determined exec-file target:/home/simark/build/binutils-gdb/gdb/execer
exec-file-mismatch handling is currently "ask"
Reading /home/simark/build/binutils-gdb/gdb/execer from remote target...
Load new symbol table from "target:/home/simark/build/binutils-gdb/gdb/execer"? (y or n)
When handling the exec, GDB updates the exec-file of the inferior to be
the execee. This means that a subsequent "run" will run the execee, not
the original executable (execer).
remote_target::follow_exec is meant to update the "remote exec-file",
which is the file on the remote system that will be executed if you
"run" the inferior, to the execee as well. However, this is not called
when follow-exec-mode is same, because target_follow_exec is not called
in this branch. As a result, GDB thinks the inferior is executing
execee but the remote side is really executing execer, hence the
mismatch message.
By calling target_follow_exec in the "same" branch of the follow_exec
function, we ensure that everybody agrees, and we get the same behavior
with the extended-remote target as we get with the native target, the
execee is executed on the second run:
$ ./gdbserver --once --multi :1234
...
$ ./gdb -q -nx --data-directory=data-directory ./execer -ex "set remote exec-file /home/simark/build/binutils-gdb/gdb/execer" -ex "tar ext :1234"
Reading symbols from ./execer...
Remote debugging using :1234
(gdb) r
Starting program: /home/simark/build/binutils-gdb/gdb/execer
process 1501445 is executing new program: /home/simark/build/binutils-gdb/gdb/execee
[Inferior 1 (process 1501445) exited normally]
(gdb) r
`target:/home/simark/build/binutils-gdb/gdb/execee' has disappeared; keeping its symbols.
Starting program: target:/home/simark/build/binutils-gdb/gdb/execee
[Inferior 1 (process 1501447) exited normally]
(gdb)
This scenario is tested in gdb.base/foll-exec-mode.exp, and in fact this
patch fixes the test for me when using
--target_board=native-extended-gdbserver.
gdb/ChangeLog:
* infrun.c (follow_exec): Call target_follow_fork when
follow-exec-mode is same.
* target.h (target_follow_fork): Improve doc.
[1] https://github.com/ROCm-Developer-Tools/ROCgdb
[2] https://sourceware.org/bugzilla/show_bug.cgi?id=27745
Change-Id: I4ee84a875e39bf3f8eaf3e6789a4bfe23a2a430e
|
|
I noticed that all implementations return false, so
target_ops::follow_fork doesn't really need to return a value. Change
it to return void.
gdb/ChangeLog:
* target.h (struct target_ops) <follow_fork>: Return void.
(target_follow_fork): Likewise.
* target.c (default_follow_fork): Likewise.
(target_follow_fork): Likewise.
* infrun.c (follow_fork_inferior): Adjust.
* fbsd-nat.h (class fbsd_nat_target) <follow_fork>: Return void.
* fbsd-nat.c (fbsd_nat_target:::follow_fork): Likewise.
* linux-nat.h (class linux_nat_target) <follow_fork>: Likewise.
* linux-nat.c (linux_nat_target::follow_fork): Return void.
* obsd-nat.h (class obsd_nat_target) <follow_fork>: Return void.
* obsd-nat.c (obsd_nat_target::follow_fork): Likewise.
* remote.c (class remote_target) <follow_fork>: Likewise.
(remote_target::follow_fork): Likewise.
* target-delegates.c: Re-generate.
Change-Id: If908c2f68b29fa275be2b0b9deb41e4c6a1b7879
|
|
Rationale
---------
Let's say you have multiple threads hitting a conditional breakpoint
at the same time, and all of these are going to evaluate to false.
All these threads will need to be resumed.
Currently, GDB fetches one target event (one SIGTRAP representing the
breakpoint hit) and decides that the thread should be resumed. It
calls resume and commit_resume immediately. It then fetches the
second target event, and does the same, until it went through all
threads.
The result is therefore something like:
- consume event for thread A
- resume thread A
- commit resume (affects thread A)
- consume event for thread B
- resume thread B
- commit resume (affects thread B)
- consume event for thread C
- resume thread C
- commit resume (affects thread C)
For targets where it's beneficial to group resumptions requests (most
likely those that implement target_ops::commit_resume), it would be
much better to have:
- consume event for thread A
- resume thread A
- consume event for thread B
- resume thread B
- consume event for thread C
- resume thread C
- commit resume (affects threads A, B and C)
Implementation details
----------------------
To achieve this, this patch adds another check in
maybe_set_commit_resumed_all_targets to avoid setting the
commit-resumed flag of targets that readily have events to provide to
infrun.
To determine if a target has events readily available to report, this
patch adds an `has_pending_events` target_ops method. The method
returns a simple bool to say whether or not it has pending events to
report.
Testing
=======
To test this, I start GDBserver with a program that spawns multiple
threads:
$ ../gdbserver/gdbserver --once :1234 ~/src/many-threads-stepping-over-breakpoints/many-threads-stepping-over-breakpoints
I then connect with GDB and install a conditional breakpoint that always
evaluates to false (and force the evaluation to be done by GDB):
$ ./gdb -nx --data-directory=data-directory \
/home/simark/src/many-threads-stepping-over-breakpoints/many-threads-stepping-over-breakpoints \
-ex "set breakpoint condition-evaluation host" \
-ex "set pag off" \
-ex "set confirm off" \
-ex "maint set target-non-stop on" \
-ex "tar rem :1234" \
-ex "tb main" \
-ex "b 13 if 0" \
-ex c \
-ex "set debug infrun" \
-ex "set debug remote 1" \
-ex "set debug displaced"
I then do "continue" and look at the log.
The remote target receives a bunch of stop notifications for all
threads that have hit the breakpoint. infrun consumes and processes
one event, decides it should not cause a stop, prepares a displaced
step, after which we should see:
[infrun] maybe_set_commit_resumed_all_process_targets: not requesting commit-resumed for target remote, target has pending events
Same for a second thread (since we have 2 displaced step buffers).
For the following threads, their displaced step is deferred since
there are no more buffers available.
After consuming the last event the remote target has to offer, we get:
[infrun] maybe_set_commit_resumed_all_process_targets: enabling commit-resumed for target remote
[infrun] maybe_call_commit_resumed_all_process_targets: calling commit_resumed for target remote
[remote] Sending packet: $vCont;s:p14d16b.14d1b1;s:p14d16b.14d1b2#55
[remote] Packet received: OK
Without the patch, there would have been one vCont;s just after each
prepared displaced step.
gdb/ChangeLog:
yyyy-mm-dd Simon Marchi <simon.marchi@efficios.com>
Pedro Alves <pedro@palves.net>
* async-event.c (async_event_handler_marked): New.
* async-event.h (async_event_handler_marked): Declare.
* infrun.c (maybe_set_commit_resumed_all_targets): Switch to
inferior before calling target method. Don't commit-resumed if
target_has_pending_events is true.
* remote.c (remote_target::has_pending_events): New.
* target-delegates.c: Regenerate.
* target.c (target_has_pending_events): New.
* target.h (target_ops::has_pending_events): New target method.
(target_has_pending_events): New.
Change-Id: I18112ba19a1ff4986530c660f530d847bb4a1f1d
|
|
pending statuses
The rationale for this patch comes from the ROCm port [1], the goal
being to reduce the number of back and forths between GDB and the
target when doing successive operations. I'll start with explaining
the rationale and then go over the implementation. In the ROCm / GPU
world, the term "wave" is somewhat equivalent to a "thread" in GDB.
So if you read if from a GPU stand point, just s/thread/wave/.
ROCdbgapi, the library used by GDB [2] to communicate with the GPU
target, gives the illusion that it's possible for the debugger to
control (start and stop) individual threads. But in reality, this is
not how it works. Under the hood, all threads of a queue are
controlled as a group. To stop one thread in a group of running ones,
the state of all threads is retrieved from the GPU, all threads are
destroyed, and all threads but the one we want to stop are re-created
from the saved state. The net result, from the point of view of GDB,
is that the library stopped one thread. The same thing goes if we
want to resume one thread while others are running: the state of all
running threads is retrieved from the GPU, they are all destroyed, and
they are all re-created, including the thread we want to resume.
This leads to some inefficiencies when combined with how GDB works,
here are two examples:
- Stopping all threads: because the target operates in non-stop mode,
when the user interface mode is all-stop, GDB must stop all threads
individually when presenting a stop. Let's suppose we have 1000
threads and the user does ^C. GDB asks the target to stop one
thread. Behind the scenes, the library retrieves 1000 thread
states and restores the 999 others still running ones. GDB asks
the target to stop another one. The target retrieves 999 thread
states and restores the 998 remaining ones. That means that to
stop 1000 threads, we did 1000 back and forths with the GPU. It
would have been much better to just retrieve the states once and
stop there.
- Resuming with pending events: suppose the 1000 threads hit a
breakpoint at the same time. The breakpoint is conditional and
evaluates to true for the first thread, to false for all others.
GDB pulls one event (for the first thread) from the target, decides
that it should present a stop, so stops all threads using
stop_all_threads. All these other threads have a breakpoint event
to report, which is saved in `thread_info::suspend::waitstatus` for
later. When the user does "continue", GDB resumes that one thread
that did hit the breakpoint. It then processes the pending events
one by one as if they just arrived. It picks one, evaluates the
condition to false, and resumes the thread. It picks another one,
evaluates the condition to false, and resumes the thread. And so
on. In between each resumption, there is a full state retrieval
and re-creation. It would be much nicer if we could wait a little
bit before sending those threads on the GPU, until it processed all
those pending events.
To address this kind of performance issue, ROCdbgapi has a concept
called "forward progress required", which is a boolean state that
allows its user (i.e. GDB) to say "I'm doing a bunch of operations,
you can hold off putting the threads on the GPU until I'm done" (the
"forward progress not required" state). Turning forward progress back
on indicates to the library that all threads that are supposed to be
running should now be really running on the GPU.
It turns out that GDB has a similar concept, though not as general,
commit_resume. One difference is that commit_resume is not stateful:
the target can't look up "does the core need me to schedule resumed
threads for execution right now". It is also specifically linked to
the resume method, it is not used in other contexts. The target
accumulates resumption requests through target_ops::resume calls, and
then commits those resumptions when target_ops::commit_resume is
called. The target has no way to check if it's ok to leave resumed
threads stopped in other target methods.
To bridge the gap, this patch generalizes the commit_resume concept in
GDB to match the forward progress concept of ROCdbgapi. The current
name (commit_resume) can be interpreted as "commit the previous resume
calls". I renamed the concept to "commit_resumed", as in "commit the
threads that are resumed".
In the new version, we have two things:
- the commit_resumed_state field in process_stratum_target: indicates
whether GDB requires target stacks using this target to have
resumed threads committed to the execution target/device. If
false, an execution target is allowed to leave resumed threads
un-committed at the end of whatever method it is executing.
- the commit_resumed target method: called when commit_resumed_state
transitions from false to true. While commit_resumed_state was
false, the target may have left some resumed threads un-committed.
This method being called tells it that it should commit them back
to the execution device.
Let's take the "Stopping all threads" scenario from above and see how
it would work with the ROCm target with this change. Before stopping
all threads, GDB would set the target's commit_resumed_state field to
false. It would then ask the target to stop the first thread. The
target would retrieve all threads' state from the GPU and mark that
one as stopped. Since commit_resumed_state is false, it leaves all
the other threads (still resumed) stopped. GDB would then proceed to
call target_stop for all the other threads. Since resumed threads are
not committed, this doesn't do any back and forth with the GPU.
To simplify the implementation of targets, this patch makes it so that
when calling certain target methods, the contract between the core and
the targets guarantees that commit_resumed_state is false. This way,
the target doesn't need two paths, one for commit_resumed_state ==
true and one for commit_resumed_state == false. It can just assert
that commit_resumed_state is false and work with that assumption.
This also helps catch places where we forgot to disable
commit_resumed_state before calling the method, which represents a
probable optimization opportunity. The commit adds assertions in the
target method wrappers (target_resume and friends) to have some
confidence that this contract between the core and the targets is
respected.
The scoped_disable_commit_resumed type is used to disable the commit
resumed state of all process targets on construction, and selectively
re-enable it on destruction (see below for criteria). Note that it
only sets the process_stratum_target::commit_resumed_state flag. A
subsequent call to maybe_call_commit_resumed_all_targets is necessary
to call the commit_resumed method on all target stacks with process
targets that got their commit_resumed_state flag turned back on. This
separation is because we don't want to call the commit_resumed methods
in scoped_disable_commit_resumed's destructor, as they may throw.
On destruction, commit-resumed is not re-enabled for a given target
if:
1. this target has no threads resumed, or
2. this target has at least one resumed thread with a pending status
known to the core (saved in thread_info::suspend::waitstatus).
The first point is not technically necessary, because a proper
commit_resumed implementation would be a no-op if the target has no
resumed threads. But since we have a flag do to a quick check, it
shouldn't hurt.
The second point is more important: together with the
scoped_disable_commit_resumed instance added in fetch_inferior_event,
it makes it so the "Resuming with pending events" described above is
handled efficiently. Here's what happens in that case:
1. The user types "continue".
2. Upon destruction, the scoped_disable_commit_resumed in the
`proceed` function does not enable commit-resumed, as it sees some
threads have pending statuses.
3. fetch_inferior_event is called to handle another event, the
breakpoint hit evaluates to false, and that thread is resumed.
Because there are still more threads with pending statuses, the
destructor of scoped_disable_commit_resumed in
fetch_inferior_event still doesn't enable commit-resumed.
4. Rinse and repeat step 3, until the last pending status is handled
by fetch_inferior_event. In that case,
scoped_disable_commit_resumed's destructor sees there are no more
threads with pending statues, so it asks the target to commit
resumed threads.
This allows us to avoid all unnecessary back and forths, there is a
single commit_resumed call once all pending statuses are processed.
This change required remote_target::remote_stop_ns to learn how to
handle stopping threads that were resumed but pending vCont. The
simplest example where that happens is when using the remote target in
all-stop, but with "maint set target-non-stop on", to force it to
operate in non-stop mode under the hood. If two threads hit a
breakpoint at the same time, GDB will receive two stop replies. It
will present the stop for one thread and save the other one in
thread_info::suspend::waitstatus.
Before this patch, when doing "continue", GDB first resumes the thread
without a pending status:
Sending packet: $vCont;c:p172651.172676#f3
It then consumes the pending status in the next fetch_inferior_event
call:
[infrun] do_target_wait_1: Using pending wait status status->kind = stopped, signal = GDB_SIGNAL_TRAP for Thread 1517137.1517137.
[infrun] target_wait (-1.0.0, status) =
[infrun] 1517137.1517137.0 [Thread 1517137.1517137],
[infrun] status->kind = stopped, signal = GDB_SIGNAL_TRAP
It then realizes it needs to stop all threads to present the stop, so
stops the thread it just resumed:
[infrun] stop_all_threads: Thread 1517137.1517137 not executing
[infrun] stop_all_threads: Thread 1517137.1517174 executing, need stop
remote_stop called
Sending packet: $vCont;t:p172651.172676#04
This is an unnecessary resume/stop. With this patch, we don't commit
resumed threads after proceeding, because of the pending status:
[infrun] maybe_commit_resumed_all_process_targets: not requesting commit-resumed for target extended-remote, a thread has a pending waitstatus
When GDB handles the pending status and stop_all_threads runs, we stop a
resumed but pending vCont thread:
remote_stop_ns: Enqueueing phony stop reply for thread pending vCont-resume (1520940, 1520976, 0)
That thread was never actually resumed on the remote stub / gdbserver,
so we shouldn't send a packet to the remote side asking to stop the
thread.
Note that there are paths that resume the target and then do a
synchronous blocking wait, in sort of nested event loop, via
wait_sync_command_done. For example, inferior function calls, or any
run control command issued from a breakpoint command list. We handle
that making wait_sync_command_one a "sync" point -- force forward
progress, or IOW, force-enable commit-resumed state.
gdb/ChangeLog:
yyyy-mm-dd Simon Marchi <simon.marchi@efficios.com>
Pedro Alves <pedro@palves.net>
* infcmd.c (run_command_1, attach_command, detach_command)
(interrupt_target_1): Use scoped_disable_commit_resumed.
* infrun.c (do_target_resume): Remove
target_commit_resume call.
(commit_resume_all_targets): Remove.
(maybe_set_commit_resumed_all_targets): New.
(maybe_call_commit_resumed_all_targets): New.
(enable_commit_resumed): New.
(scoped_disable_commit_resumed::scoped_disable_commit_resumed)
(scoped_disable_commit_resumed::~scoped_disable_commit_resumed)
(scoped_disable_commit_resumed::reset)
(scoped_disable_commit_resumed::reset_and_commit)
(scoped_enable_commit_resumed::scoped_enable_commit_resumed)
(scoped_enable_commit_resumed::~scoped_enable_commit_resumed):
New.
(proceed): Use scoped_disable_commit_resumed and
maybe_call_commit_resumed_all_targets.
(fetch_inferior_event): Use scoped_disable_commit_resumed.
* infrun.h (struct scoped_disable_commit_resumed): New.
(maybe_call_commit_resumed_all_process_targets): New.
(struct scoped_enable_commit_resumed): New.
* mi/mi-main.c (exec_continue): Use scoped_disable_commit_resumed.
* process-stratum-target.h (class process_stratum_target):
<commit_resumed_state>: New.
* record-full.c (record_full_wait_1): Change commit_resumed_state
around calling commit_resumed.
* remote.c (class remote_target) <commit_resume>: Rename to...
<commit_resumed>: ... this.
(struct stop_reply): Move up.
(remote_target::commit_resume): Rename to...
(remote_target::commit_resumed): ... this. Check if there is any
thread pending vCont resume.
(remote_target::remote_stop_ns): Generate stop replies for resumed
but pending vCont threads.
(remote_target::wait_ns): Add gdb_assert.
* target-delegates.c: Regenerate.
* target.c (target_wait, target_resume): Assert that the current
process_stratum target isn't in commit-resumed state.
(defer_target_commit_resume): Remove.
(target_commit_resume): Remove.
(target_commit_resumed): New.
(make_scoped_defer_target_commit_resume): Remove.
(target_stop): Assert that the current process_stratum target
isn't in commit-resumed state.
* target.h (struct target_ops) <commit_resume>: Rename to ...
<commit_resumed>: ... this.
(target_commit_resume): Remove.
(target_commit_resumed): New.
(make_scoped_defer_target_commit_resume): Remove.
* top.c (wait_sync_command_done): Use
scoped_enable_commit_resumed.
[1] https://github.com/ROCm-Developer-Tools/ROCgdb/
[2] https://github.com/ROCm-Developer-Tools/ROCdbgapi
Change-Id: I836135531a29214b21695736deb0a81acf8cf566
|
|
The current_top_target function is a hidden dependency on the current
inferior. Since I'd like to slowly move towards reducing our dependency
on the global current state, remove this function and make callers use
current_inferior ()->top_target ()
There is no expected change in behavior, but this one step towards
making those callers use the inferior from their context, rather than
refer to the global current inferior.
gdb/ChangeLog:
* target.h (current_top_target): Remove, make callers use the
current inferior instead.
* target.c (current_top_target): Remove.
Change-Id: Iccd457036f84466cdaa3865aa3f9339a24ea001d
|
|
The following patch removes the current_top_target function, replacing
uses with `current_inferior ()->top_target ()`. This is a problem for
uses in target.h, because they don't have access to the current_inferior
function and the inferior structure: target.h can't include inferior.h,
otherwise that would make a cyclic inclusion.
Avoid this by moving all implementations of the wrappers that call
target methods with the current target to target.c. Many of them are
changed from a macro to a function, which is an improvement for
readability and debuggability, IMO.
target_shortname and target_longname were not function-like macros, so a
few adjustments are needed.
gdb/ChangeLog:
* target.h (target_shortname): Change to function declaration.
(target_longname): Likewise.
(target_attach_no_wait): Likewise.
(target_post_attach): Likewise.
(target_prepare_to_store): Likewise.
(target_supports_enable_disable_tracepoint): Likewise.
(target_supports_string_tracing): Likewise.
(target_supports_evaluation_of_breakpoint_conditions): Likewise.
(target_supports_dumpcore): Likewise.
(target_dumpcore): Likewise.
(target_can_run_breakpoint_commands): Likewise.
(target_files_info): Likewise.
(target_post_startup_inferior): Likewise.
(target_insert_fork_catchpoint): Likewise.
(target_remove_fork_catchpoint): Likewise.
(target_insert_vfork_catchpoint): Likewise.
(target_remove_vfork_catchpoint): Likewise.
(target_insert_exec_catchpoint): Likewise.
(target_remove_exec_catchpoint): Likewise.
(target_set_syscall_catchpoint): Likewise.
(target_rcmd): Likewise.
(target_can_lock_scheduler): Likewise.
(target_can_async_p): Likewise.
(target_is_async_p): Likewise.
(target_execution_direction): Likewise.
(target_extra_thread_info): Likewise.
(target_pid_to_exec_file): Likewise.
(target_thread_architecture): Likewise.
(target_find_memory_regions): Likewise.
(target_make_corefile_notes): Likewise.
(target_get_bookmark): Likewise.
(target_goto_bookmark): Likewise.
(target_stopped_by_watchpoint): Likewise.
(target_stopped_by_sw_breakpoint): Likewise.
(target_supports_stopped_by_sw_breakpoint): Likewise.
(target_stopped_by_hw_breakpoint): Likewise.
(target_supports_stopped_by_hw_breakpoint): Likewise.
(target_have_steppable_watchpoint): Likewise.
(target_can_use_hardware_watchpoint): Likewise.
(target_region_ok_for_hw_watchpoint): Likewise.
(target_can_do_single_step): Likewise.
(target_insert_watchpoint): Likewise.
(target_remove_watchpoint): Likewise.
(target_insert_hw_breakpoint): Likewise.
(target_remove_hw_breakpoint): Likewise.
(target_can_accel_watchpoint_condition): Likewise.
(target_can_execute_reverse): Likewise.
(target_get_ada_task_ptid): Likewise.
(target_filesystem_is_local): Likewise.
(target_trace_init): Likewise.
(target_download_tracepoint): Likewise.
(target_can_download_tracepoint): Likewise.
(target_download_trace_state_variable): Likewise.
(target_enable_tracepoint): Likewise.
(target_disable_tracepoint): Likewise.
(target_trace_start): Likewise.
(target_trace_set_readonly_regions): Likewise.
(target_get_trace_status): Likewise.
(target_get_tracepoint_status): Likewise.
(target_trace_stop): Likewise.
(target_trace_find): Likewise.
(target_get_trace_state_variable_value): Likewise.
(target_save_trace_data): Likewise.
(target_upload_tracepoints): Likewise.
(target_upload_trace_state_variables): Likewise.
(target_get_raw_trace_data): Likewise.
(target_get_min_fast_tracepoint_insn_len): Likewise.
(target_set_disconnected_tracing): Likewise.
(target_set_circular_trace_buffer): Likewise.
(target_set_trace_buffer_size): Likewise.
(target_set_trace_notes): Likewise.
(target_get_tib_address): Likewise.
(target_set_permissions): Likewise.
(target_static_tracepoint_marker_at): Likewise.
(target_static_tracepoint_markers_by_strid): Likewise.
(target_traceframe_info): Likewise.
(target_use_agent): Likewise.
(target_can_use_agent): Likewise.
(target_augmented_libraries_svr4_read): Likewise.
(target_log_command): Likewise.
* target.c (target_shortname): New.
(target_longname): New.
(target_attach_no_wait): New.
(target_post_attach): New.
(target_prepare_to_store): New.
(target_supports_enable_disable_tracepoint): New.
(target_supports_string_tracing): New.
(target_supports_evaluation_of_breakpoint_conditions): New.
(target_supports_dumpcore): New.
(target_dumpcore): New.
(target_can_run_breakpoint_commands): New.
(target_files_info): New.
(target_post_startup_inferior): New.
(target_insert_fork_catchpoint): New.
(target_remove_fork_catchpoint): New.
(target_insert_vfork_catchpoint): New.
(target_remove_vfork_catchpoint): New.
(target_insert_exec_catchpoint): New.
(target_remove_exec_catchpoint): New.
(target_set_syscall_catchpoint): New.
(target_rcmd): New.
(target_can_lock_scheduler): New.
(target_can_async_p): New.
(target_is_async_p): New.
(target_execution_direction): New.
(target_extra_thread_info): New.
(target_pid_to_exec_file): New.
(target_thread_architecture): New.
(target_find_memory_regions): New.
(target_make_corefile_notes): New.
(target_get_bookmark): New.
(target_goto_bookmark): New.
(target_stopped_by_watchpoint): New.
(target_stopped_by_sw_breakpoint): New.
(target_supports_stopped_by_sw_breakpoint): New.
(target_stopped_by_hw_breakpoint): New.
(target_supports_stopped_by_hw_breakpoint): New.
(target_have_steppable_watchpoint): New.
(target_can_use_hardware_watchpoint): New.
(target_region_ok_for_hw_watchpoint): New.
(target_can_do_single_step): New.
(target_insert_watchpoint): New.
(target_remove_watchpoint): New.
(target_insert_hw_breakpoint): New.
(target_remove_hw_breakpoint): New.
(target_can_accel_watchpoint_condition): New.
(target_can_execute_reverse): New.
(target_get_ada_task_ptid): New.
(target_filesystem_is_local): New.
(target_trace_init): New.
(target_download_tracepoint): New.
(target_can_download_tracepoint): New.
(target_download_trace_state_variable): New.
(target_enable_tracepoint): New.
(target_disable_tracepoint): New.
(target_trace_start): New.
(target_trace_set_readonly_regions): New.
(target_get_trace_status): New.
(target_get_tracepoint_status): New.
(target_trace_stop): New.
(target_trace_find): New.
(target_get_trace_state_variable_value): New.
(target_save_trace_data): New.
(target_upload_tracepoints): New.
(target_upload_trace_state_variables): New.
(target_get_raw_trace_data): New.
(target_get_min_fast_tracepoint_insn_len): New.
(target_set_disconnected_tracing): New.
(target_set_circular_trace_buffer): New.
(target_set_trace_buffer_size): New.
(target_set_trace_notes): New.
(target_get_tib_address): New.
(target_set_permissions): New.
(target_static_tracepoint_marker_at): New.
(target_static_tracepoint_markers_by_strid): New.
(target_traceframe_info): New.
(target_use_agent): New.
(target_can_use_agent): New.
(target_augmented_libraries_svr4_read): New.
(target_log_command): New.
* bfin-tdep.c (bfin_sw_breakpoint_from_kind): Adjust.
* infrun.c (set_schedlock_func): Adjust.
* mi/mi-main.c (exec_reverse_continue): Adjust.
* reverse.c (exec_reverse_once): Adjust.
* sh-tdep.c (sh_sw_breakpoint_from_kind): Adjust.
* tui/tui-stack.c (tui_locator_window::make_status_line): Adjust.
* remote-sim.c (gdbsim_target::detach): Adjust.
(gdbsim_target::files_info): Adjust.
Change-Id: I72ef56e9a25adeb0b91f1ad05e34c89f77ebeaa8
|
|
This patch starts adding some of the generic pieces to accomodate memory
tagging.
We have three new target methods:
- supports_memory_tagging: Checks if the target supports memory tagging. This
defaults to false for targets that don't support memory tagging.
- fetch_memtags: Fetches the allocation tags associated with a particular
memory range [address, address + length).
The default is to return 0 without returning any tags. This should only
be called if memory tagging is supported.
- store_memtags: Stores a set of allocation tags for a particular memory
range [address, address + length).
The default is to return 0. This should only
be called if memory tagging is supported.
gdb/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* remote.c (remote_target) <supports_memory_tagging>: New method
override.
<fetch_memtags>: New method override.
<store_memtags>: New method override.
(remote_target::supports_memory_tagging): New method.
(remote_target::fetch_memtags): New method.
(remote_target::store_memtags): New method.
* target-delegates.c: Regenerate.
* target.h (struct target_ops) <supports_memory_tagging>: New virtual
method.
<fetch_memtags>: New virtual method.
<store_memtags>: New virtual method.
(target_supports_memory_tagging): Define.
(target_fetch_memtags): Define.
(target_store_memtags): Define.
* target-debug.h (target_debug_print_size_t)
(target_debug_print_const_gdb_byte_vector_r)
(target_debug_print_gdb_byte_vector_r): New functions.
|
|
I noticed it was unused.
gdb/ChangeLog:
* target.h (target_longname): Remove.
Change-Id: Id4f514ea038a6d8d40e11179db587b11793cbbd8
|
|
Same principle as the previous patches.
gdb/ChangeLog:
* target.h (target_is_pushed): Remove, update callers to use
inferior::target_is_pushed instead.
* target.c (target_is_pushed): Remove.
Change-Id: I9862e6205acc65672da807cbe4b46cde009e7b9d
|
|
Same as the previous patch, but for the push_target functions.
The implementation of the move variant is moved to a new overload of
inferior::push_target.
gdb/ChangeLog:
* target.h (push_target): Remove, update callers to use
inferior::push_target.
* target.c (push_target): Remove.
* inferior.h (class inferior) <push_target>: New overload.
Change-Id: I5a95496666278b8f3965e5e8aecb76f54a97c185
|
|
unpush_target unpushes the passed-in target from the current inferior's
target stack. Calling it is therefore an implicit dependency on the
current global inferior. Remove that function and make the callers use
the inferior::unpush_target method directly. This sometimes allows
using the inferior from the context rather than the global current
inferior.
target_unpusher::operator() now needs to be implemented in target.c,
otherwise target.h and inferior.h both need to include each other, and
that wouldn't work.
gdb/ChangeLog:
* target.h (unpush_target): Remove, update all callers
to use `inferior::unpush_target` instead.
(struct target_unpusher) <operator()>: Just declare.
* target.c (unpush_target): Remove.
(target_unpusher::operator()): New.
Change-Id: Ia5172dfb3f373e0a75b991885b50322ca2142a8c
|
|
The only target that implements target_ops::get_section_table in a
meaningful way is exec_target. This target calls back into the
program space to return the current global section_table.
The global section table is populated whenever the user provides GDB
with an executable, or when a symbol file is loaded, e.g. when a
dynamic library is loaded, or when the user does add-symbol-file.
I recently ran into a situation where a user, debugging a remote
target, was not supplying GDB with a main executable at all. Instead
the user attached to the target then did add-symbol-file, and then
proceeded to debug the target.
This works fine, but it was noticed that even when
trust-readonly-sections was on GDB was still accessing the target to
get the contents of readonly sections.
The problem is that by not providing an executable there was no
exec_target in the target stack, and so when GDB calls the
target_ops::get_section_table function GDB ends up in
dummy_target::get_section_table, which just returns NULL.
What I want is that even when GDB doesn't have an exec_target in the
target stack, a call to target_ops::get_section_table will still
return the section_table from the current program space.
When considering how to achieve this my first though was, why is the
request for the section table going via the target stack at all? The
set of sections loaded is a property of the program space, not the
target. This is, after all, why the data is being stored in the
program space.
So I initially tried changing target_get_section_table so that,
instead of calling into the target it just returns
current_program_space->target_sections ().
This would be fine except for one issue, target_bfd (from
bfd-target.c). This code is used from solib-svr4.c to create a
temporary target_ops structure that implements two functions
target_bfd::xfer_partial and target_bfd::get_section_table.
The purpose behind the code is to enable two targets, ppc64 and frv to
decode function descriptors from the dynamic linker, based on the
non-relocated addresses from within the dynamic linker bfd object.
Both of the implemented functions in target_bfd rely on the target_bfd
object holding a section table, and the ppc64 target requires that the
target_bfd implement ::get_section_table.
The frv target doesn't require ::get_section_table, instead it
requires the ::xfer_partial. We could in theory change the ppc64
target to use the same approach as frv, however, this would be a bad
idea. I believe that the frv target approach is broken. I'll
explain:
The frv target calls get_target_memory_unsigned to read the function
descriptor. The address being read is the non-relocated address read
from the dynamic linker in solib-srv4.c:enable_break. Calling
get_target_memory_unsigned eventually ends up in target_xfer_partial
with an object type of TARGET_OBJECT_RAW_MEMORY. This will then call
memory_xfer_check_region. I believe that it is quite possible that a
the non-relocated addresses pulled from the dynamic linker could be in
a memory region that is not readable, while the relocated addresses
are in a readable memory region. If this was ever the case for the
frv target then GDB would reject the attempt to read the non-relocated
function pointer.
In contrast the ppc64 target calls target_section_by_addr, which calls
target_get_section_table, which then calls the ::get_section_table
function on the target.
Thus, when reflecting on target_bfd we see two functions,
::xfer_partial and ::get_section_table. The former is required by the
frv target, but that target is (I think) potentially broken. While
the latter is required by the ppc64 target, but this forces
::get_section_table to exist as a target_ops member function.
So my original plan, have target_get_section_table NOT call a
target_ops member function appears to be flawed.
My next idea was to remove exec_target::get_section_table, and instead
move the implementation into dummy_target::get_section_table.
Currently the dummy_target implementation always returns NULL
indicating no section table, but plenty of other dummy_target member
functions do more than just return null values.
So now, dummy_target::get_section_table returns the section table from
the current program space. This allows target_bfd to remain
unchanged, so ppc64 and frv should not be affected.
Making this change removes the requirement for the user to provide an
executable, GDB can now always access the section_table, as the
dummy_target always exists in the target stack.
Finally, there's a test that the target_section table is not empty in
the case where the user does add-symbol-file without providing an
executable.
gdb/ChangeLog:
* exec.c (exec_target::get_section_table): Delete member function.
(section_table_read_available_memory): Use current_top_target, not
just the exec_ops target.
* target-delegates.c: Regenerate.
* target.c (default_get_section_table): New function.
* target.h (target_ops::get_section_table): Change default
behaviour to call default_get_section_table.
(default_get_section_table): Declare.
|
|
The code to access the target section table can be made more const, so
lets do that. There should be no user visible changes after this
commit.
gdb/ChangeLog:
* gdb/bfd-target.c (class target_bfd) <get_section_table>: Make
return type const.
* gdb/exec.c (struct exec_target) <get_section_table>: Likewise.
(section_table_read_available_memory): Make local const.
(exec_target::xfer_partial): Make local const.
(print_section_info): Make parameter const.
* gdb/exec.h (print_section_info): Likewise.
* gdb/ppc64-tdep.c (ppc64_convert_from_func_ptr_addr): Make local
const.
* gdb/record-btrace.c (record_btrace_target::xfer_partial):
Likewise.
* gdb/remote.c (remote_target::remote_xfer_live_readonly_partial):
Likewise.
* gdb/s390-tdep.c (s390_load): Likewise.
* gdb/solib-dsbt.c (scan_dyntag): Likewise.
* gdb/solib-svr4.c (scan_dyntag): Likewise.
* gdb/target-debug.h (target_debug_print_target_section_table_p):
Rename to...
(target_debug_print_const_target_section_table_p): ...this.
* gdb/target-delegates.c: Regenerate.
* gdb/target.c (target_get_section_table): Make return type const.
(target_section_by_addr): Likewise. Also make some locals const.
(memory_xfer_partial_1): Make some locals const.
* gdb/target.h (struct target_ops) <get_section_table>: Make
return type const.
(target_section_by_addr): Likewise.
(target_get_section_table): Likewise.
|
|
Since this is a GDB 9 -> 10 regression, I would like to push it to
gdb-10-branch.
This is a follow-up to:
https://sourceware.org/pipermail/gdb-patches/2021-February/176202.html
This patch fixes a segfault seen when attaching to a process on Solaris.
The steps leading to the segfault are:
- procfs_target::attach calls do_attach, at this point the inferior's
process slot in the target stack is empty.
- do_attach adds a thread with `add_thread (&the_procfs_target, ptid)`
- in add_thread_silent, the passed target (&the_procfs_target) is
passed to find_inferior_ptid
- find_inferior_ptid returns nullptr, as there is no inferior with this
ptid that has &the_procfs_target as its process target
- the nullptr `inf` is passed to find_thread_ptid, which dereferences
it, causing a segfault
- back in procfs_target::attach, after do_attach, we push the
the_procfs_target on the inferior's target stack, although we never
reach this because the segfault happens before.
To fix this, I think we need to do the same as is done in
inf_ptrace_target::attach: push the target early and unpush it in case
the attach fails (and keep it if the attach succeeds).
Implement it by moving target_unpush_up to target.h, so it can be
re-used here. Make procfs_target::attach use it. Note that just like
is mentioned in inf_ptrace_target::attach, we should push the target
before calling target_pid_to_str, so that calling target_pid_to_str ends
up in procfs_target::pid_to_str.
Tested by trying to attach on a process on gcc211 on the gcc compile
farm.
gdb/ChangeLog:
PR gdb/27435
* inf-ptrace.c (struct target_unpusher): Move to target.h.
(target_unpush_up): Likewise.
* procfs.c (procfs_target::attach): Push target early. Use
target_unpush_up to unpush target in case of error.
* target.h (struct target_unpusher): Move here.
(target_unpush_up): Likewise.
Change-Id: I88aff8b20204e1ca1d792e27ac6bc34fc1aa0d52
|
|
gdb/ChangeLog:
* target.c (target_is_non_stop_p): Return bool.
* target.h (target_is_non_stop_p): Return bool.
Change-Id: Icdb37ffe917798e59b822976794d4b1b7aafd709
|
|
A following patch will add a testcase that has a number of threads
constantly stepping over a breakpoint, and then has GDB detach the
process. That testcase sometimes fails with the inferior crashing
with SIGTRAP after the detach because of the bug fixed by this patch,
when tested with the native target.
The problem is that target_detach removes breakpoints from the target
immediately, and that does not work with the native GNU/Linux target
(and probably no other native target) currently. The test wouldn't
fail with this issue when testing against gdbserver, because gdbserver
does allow accessing memory while the current thread is running, by
transparently pausing all threads temporarily, without GDB noticing.
Implementing that in gdbserver was a lot of work, so I'm not looking
forward right now to do the same in the native target. Instead, I
came up with a simpler solution -- push the breakpoints removal down
to the targets. The Linux target conveniently already pauses all
threads before detaching them, since PTRACE_DETACH only works with
stopped threads, so we move removing breakpoints to after that. Only
the remote and GNU/Linux targets support support async execution, so
no other target should really need this.
gdb/ChangeLog:
* linux-nat.c (linux_nat_target::detach): Remove breakpoints
here...
* remote.c (remote_target::remote_detach_1): ... and here ...
* target.c (target_detach): ... instead of here.
* target.h (target_ops::detach): Add comment.
|
|
remote_debug is currently declared in target.h and defined in top.c.
Move them to remote.h and remote.c.
Include remote.h in remote-sim.c, as it uses remote_debug.
gdb/ChangeLog:
* target.h (remote_debug): Move to...
* remote.h (remote_debug): ... here.
* top.c (remote_debug): Move to...
* remote.c (remote_debug): ... here.
* remote-sim.c: Include remote.h.
Change-Id: Iae632d12ff8900b23eee6b2529d6a3cd339a8caa
|
|
They are currently in target.h, it would make more sense to have them in
serial.h, since they are defined in serial.c.
gdb/ChangeLog:
* target.h (baud_rate, serial_parity): Move declarations...
* serial.h: ... here.
* main.c: Include serial.h.
* serial.c (baud_rate, serial_parity): Update doc.
Change-Id: Idc983c154c80ccc29b07ce68df3483cefe03fb71
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
Many spots incorrectly use only spaces for indentation (for example,
there are a lot of spots in ada-lang.c). I've always found it awkward
when I needed to edit one of these spots: do I keep the original wrong
indentation, or do I fix it? What if the lines around it are also
wrong, do I fix them too? I probably don't want to fix them in the same
patch, to avoid adding noise to my patch.
So I propose to fix as much as possible once and for all (hopefully).
One typical counter argument for this is that it makes code archeology
more difficult, because git-blame will show this commit as the last
change for these lines. My counter counter argument is: when
git-blaming, you often need to do "blame the file at the parent commit"
anyway, to go past some other refactor that touched the line you are
interested in, but is not the change you are looking for. So you
already need a somewhat efficient way to do this.
Using some interactive tool, rather than plain git-blame, makes this
trivial. For example, I use "tig blame <file>", where going back past
the commit that changed the currently selected line is one keystroke.
It looks like Magit in Emacs does it too (though I've never used it).
Web viewers of Github and Gitlab do it too. My point is that it won't
really make archeology more difficult.
The other typical counter argument is that it will cause conflicts with
existing patches. That's true... but it's a one time cost, and those
are not conflicts that are difficult to resolve. I have also tried "git
rebase --ignore-whitespace", it seems to work well. Although that will
re-introduce the faulty indentation, so one needs to take care of fixing
the indentation in the patch after that (which is easy).
gdb/ChangeLog:
* aarch64-linux-tdep.c: Fix indentation.
* aarch64-ravenscar-thread.c: Fix indentation.
* aarch64-tdep.c: Fix indentation.
* aarch64-tdep.h: Fix indentation.
* ada-lang.c: Fix indentation.
* ada-lang.h: Fix indentation.
* ada-tasks.c: Fix indentation.
* ada-typeprint.c: Fix indentation.
* ada-valprint.c: Fix indentation.
* ada-varobj.c: Fix indentation.
* addrmap.c: Fix indentation.
* addrmap.h: Fix indentation.
* agent.c: Fix indentation.
* aix-thread.c: Fix indentation.
* alpha-bsd-nat.c: Fix indentation.
* alpha-linux-tdep.c: Fix indentation.
* alpha-mdebug-tdep.c: Fix indentation.
* alpha-nbsd-tdep.c: Fix indentation.
* alpha-obsd-tdep.c: Fix indentation.
* alpha-tdep.c: Fix indentation.
* amd64-bsd-nat.c: Fix indentation.
* amd64-darwin-tdep.c: Fix indentation.
* amd64-linux-nat.c: Fix indentation.
* amd64-linux-tdep.c: Fix indentation.
* amd64-nat.c: Fix indentation.
* amd64-obsd-tdep.c: Fix indentation.
* amd64-tdep.c: Fix indentation.
* amd64-windows-tdep.c: Fix indentation.
* annotate.c: Fix indentation.
* arc-tdep.c: Fix indentation.
* arch-utils.c: Fix indentation.
* arch/arm-get-next-pcs.c: Fix indentation.
* arch/arm.c: Fix indentation.
* arm-linux-nat.c: Fix indentation.
* arm-linux-tdep.c: Fix indentation.
* arm-nbsd-tdep.c: Fix indentation.
* arm-pikeos-tdep.c: Fix indentation.
* arm-tdep.c: Fix indentation.
* arm-tdep.h: Fix indentation.
* arm-wince-tdep.c: Fix indentation.
* auto-load.c: Fix indentation.
* auxv.c: Fix indentation.
* avr-tdep.c: Fix indentation.
* ax-gdb.c: Fix indentation.
* ax-general.c: Fix indentation.
* bfin-linux-tdep.c: Fix indentation.
* block.c: Fix indentation.
* block.h: Fix indentation.
* blockframe.c: Fix indentation.
* bpf-tdep.c: Fix indentation.
* break-catch-sig.c: Fix indentation.
* break-catch-syscall.c: Fix indentation.
* break-catch-throw.c: Fix indentation.
* breakpoint.c: Fix indentation.
* breakpoint.h: Fix indentation.
* bsd-uthread.c: Fix indentation.
* btrace.c: Fix indentation.
* build-id.c: Fix indentation.
* buildsym-legacy.h: Fix indentation.
* buildsym.c: Fix indentation.
* c-typeprint.c: Fix indentation.
* c-valprint.c: Fix indentation.
* c-varobj.c: Fix indentation.
* charset.c: Fix indentation.
* cli/cli-cmds.c: Fix indentation.
* cli/cli-decode.c: Fix indentation.
* cli/cli-decode.h: Fix indentation.
* cli/cli-script.c: Fix indentation.
* cli/cli-setshow.c: Fix indentation.
* coff-pe-read.c: Fix indentation.
* coffread.c: Fix indentation.
* compile/compile-cplus-types.c: Fix indentation.
* compile/compile-object-load.c: Fix indentation.
* compile/compile-object-run.c: Fix indentation.
* completer.c: Fix indentation.
* corefile.c: Fix indentation.
* corelow.c: Fix indentation.
* cp-abi.h: Fix indentation.
* cp-namespace.c: Fix indentation.
* cp-support.c: Fix indentation.
* cp-valprint.c: Fix indentation.
* cris-linux-tdep.c: Fix indentation.
* cris-tdep.c: Fix indentation.
* darwin-nat-info.c: Fix indentation.
* darwin-nat.c: Fix indentation.
* darwin-nat.h: Fix indentation.
* dbxread.c: Fix indentation.
* dcache.c: Fix indentation.
* disasm.c: Fix indentation.
* dtrace-probe.c: Fix indentation.
* dwarf2/abbrev.c: Fix indentation.
* dwarf2/attribute.c: Fix indentation.
* dwarf2/expr.c: Fix indentation.
* dwarf2/frame.c: Fix indentation.
* dwarf2/index-cache.c: Fix indentation.
* dwarf2/index-write.c: Fix indentation.
* dwarf2/line-header.c: Fix indentation.
* dwarf2/loc.c: Fix indentation.
* dwarf2/macro.c: Fix indentation.
* dwarf2/read.c: Fix indentation.
* dwarf2/read.h: Fix indentation.
* elfread.c: Fix indentation.
* eval.c: Fix indentation.
* event-top.c: Fix indentation.
* exec.c: Fix indentation.
* exec.h: Fix indentation.
* expprint.c: Fix indentation.
* f-lang.c: Fix indentation.
* f-typeprint.c: Fix indentation.
* f-valprint.c: Fix indentation.
* fbsd-nat.c: Fix indentation.
* fbsd-tdep.c: Fix indentation.
* findvar.c: Fix indentation.
* fork-child.c: Fix indentation.
* frame-unwind.c: Fix indentation.
* frame-unwind.h: Fix indentation.
* frame.c: Fix indentation.
* frv-linux-tdep.c: Fix indentation.
* frv-tdep.c: Fix indentation.
* frv-tdep.h: Fix indentation.
* ft32-tdep.c: Fix indentation.
* gcore.c: Fix indentation.
* gdb_bfd.c: Fix indentation.
* gdbarch.sh: Fix indentation.
* gdbarch.c: Re-generate
* gdbarch.h: Re-generate.
* gdbcore.h: Fix indentation.
* gdbthread.h: Fix indentation.
* gdbtypes.c: Fix indentation.
* gdbtypes.h: Fix indentation.
* glibc-tdep.c: Fix indentation.
* gnu-nat.c: Fix indentation.
* gnu-nat.h: Fix indentation.
* gnu-v2-abi.c: Fix indentation.
* gnu-v3-abi.c: Fix indentation.
* go32-nat.c: Fix indentation.
* guile/guile-internal.h: Fix indentation.
* guile/scm-cmd.c: Fix indentation.
* guile/scm-frame.c: Fix indentation.
* guile/scm-iterator.c: Fix indentation.
* guile/scm-math.c: Fix indentation.
* guile/scm-ports.c: Fix indentation.
* guile/scm-pretty-print.c: Fix indentation.
* guile/scm-value.c: Fix indentation.
* h8300-tdep.c: Fix indentation.
* hppa-linux-nat.c: Fix indentation.
* hppa-linux-tdep.c: Fix indentation.
* hppa-nbsd-nat.c: Fix indentation.
* hppa-nbsd-tdep.c: Fix indentation.
* hppa-obsd-nat.c: Fix indentation.
* hppa-tdep.c: Fix indentation.
* hppa-tdep.h: Fix indentation.
* i386-bsd-nat.c: Fix indentation.
* i386-darwin-nat.c: Fix indentation.
* i386-darwin-tdep.c: Fix indentation.
* i386-dicos-tdep.c: Fix indentation.
* i386-gnu-nat.c: Fix indentation.
* i386-linux-nat.c: Fix indentation.
* i386-linux-tdep.c: Fix indentation.
* i386-nto-tdep.c: Fix indentation.
* i386-obsd-tdep.c: Fix indentation.
* i386-sol2-nat.c: Fix indentation.
* i386-tdep.c: Fix indentation.
* i386-tdep.h: Fix indentation.
* i386-windows-tdep.c: Fix indentation.
* i387-tdep.c: Fix indentation.
* i387-tdep.h: Fix indentation.
* ia64-libunwind-tdep.c: Fix indentation.
* ia64-libunwind-tdep.h: Fix indentation.
* ia64-linux-nat.c: Fix indentation.
* ia64-linux-tdep.c: Fix indentation.
* ia64-tdep.c: Fix indentation.
* ia64-tdep.h: Fix indentation.
* ia64-vms-tdep.c: Fix indentation.
* infcall.c: Fix indentation.
* infcmd.c: Fix indentation.
* inferior.c: Fix indentation.
* infrun.c: Fix indentation.
* iq2000-tdep.c: Fix indentation.
* language.c: Fix indentation.
* linespec.c: Fix indentation.
* linux-fork.c: Fix indentation.
* linux-nat.c: Fix indentation.
* linux-tdep.c: Fix indentation.
* linux-thread-db.c: Fix indentation.
* lm32-tdep.c: Fix indentation.
* m2-lang.c: Fix indentation.
* m2-typeprint.c: Fix indentation.
* m2-valprint.c: Fix indentation.
* m32c-tdep.c: Fix indentation.
* m32r-linux-tdep.c: Fix indentation.
* m32r-tdep.c: Fix indentation.
* m68hc11-tdep.c: Fix indentation.
* m68k-bsd-nat.c: Fix indentation.
* m68k-linux-nat.c: Fix indentation.
* m68k-linux-tdep.c: Fix indentation.
* m68k-tdep.c: Fix indentation.
* machoread.c: Fix indentation.
* macrocmd.c: Fix indentation.
* macroexp.c: Fix indentation.
* macroscope.c: Fix indentation.
* macrotab.c: Fix indentation.
* macrotab.h: Fix indentation.
* main.c: Fix indentation.
* mdebugread.c: Fix indentation.
* mep-tdep.c: Fix indentation.
* mi/mi-cmd-catch.c: Fix indentation.
* mi/mi-cmd-disas.c: Fix indentation.
* mi/mi-cmd-env.c: Fix indentation.
* mi/mi-cmd-stack.c: Fix indentation.
* mi/mi-cmd-var.c: Fix indentation.
* mi/mi-cmds.c: Fix indentation.
* mi/mi-main.c: Fix indentation.
* mi/mi-parse.c: Fix indentation.
* microblaze-tdep.c: Fix indentation.
* minidebug.c: Fix indentation.
* minsyms.c: Fix indentation.
* mips-linux-nat.c: Fix indentation.
* mips-linux-tdep.c: Fix indentation.
* mips-nbsd-tdep.c: Fix indentation.
* mips-tdep.c: Fix indentation.
* mn10300-linux-tdep.c: Fix indentation.
* mn10300-tdep.c: Fix indentation.
* moxie-tdep.c: Fix indentation.
* msp430-tdep.c: Fix indentation.
* namespace.h: Fix indentation.
* nat/fork-inferior.c: Fix indentation.
* nat/gdb_ptrace.h: Fix indentation.
* nat/linux-namespaces.c: Fix indentation.
* nat/linux-osdata.c: Fix indentation.
* nat/netbsd-nat.c: Fix indentation.
* nat/x86-dregs.c: Fix indentation.
* nbsd-nat.c: Fix indentation.
* nbsd-tdep.c: Fix indentation.
* nios2-linux-tdep.c: Fix indentation.
* nios2-tdep.c: Fix indentation.
* nto-procfs.c: Fix indentation.
* nto-tdep.c: Fix indentation.
* objfiles.c: Fix indentation.
* objfiles.h: Fix indentation.
* opencl-lang.c: Fix indentation.
* or1k-tdep.c: Fix indentation.
* osabi.c: Fix indentation.
* osabi.h: Fix indentation.
* osdata.c: Fix indentation.
* p-lang.c: Fix indentation.
* p-typeprint.c: Fix indentation.
* p-valprint.c: Fix indentation.
* parse.c: Fix indentation.
* ppc-linux-nat.c: Fix indentation.
* ppc-linux-tdep.c: Fix indentation.
* ppc-nbsd-nat.c: Fix indentation.
* ppc-nbsd-tdep.c: Fix indentation.
* ppc-obsd-nat.c: Fix indentation.
* ppc-ravenscar-thread.c: Fix indentation.
* ppc-sysv-tdep.c: Fix indentation.
* ppc64-tdep.c: Fix indentation.
* printcmd.c: Fix indentation.
* proc-api.c: Fix indentation.
* producer.c: Fix indentation.
* producer.h: Fix indentation.
* prologue-value.c: Fix indentation.
* prologue-value.h: Fix indentation.
* psymtab.c: Fix indentation.
* python/py-arch.c: Fix indentation.
* python/py-bpevent.c: Fix indentation.
* python/py-event.c: Fix indentation.
* python/py-event.h: Fix indentation.
* python/py-finishbreakpoint.c: Fix indentation.
* python/py-frame.c: Fix indentation.
* python/py-framefilter.c: Fix indentation.
* python/py-inferior.c: Fix indentation.
* python/py-infthread.c: Fix indentation.
* python/py-objfile.c: Fix indentation.
* python/py-prettyprint.c: Fix indentation.
* python/py-registers.c: Fix indentation.
* python/py-signalevent.c: Fix indentation.
* python/py-stopevent.c: Fix indentation.
* python/py-stopevent.h: Fix indentation.
* python/py-threadevent.c: Fix indentation.
* python/py-tui.c: Fix indentation.
* python/py-unwind.c: Fix indentation.
* python/py-value.c: Fix indentation.
* python/py-xmethods.c: Fix indentation.
* python/python-internal.h: Fix indentation.
* python/python.c: Fix indentation.
* ravenscar-thread.c: Fix indentation.
* record-btrace.c: Fix indentation.
* record-full.c: Fix indentation.
* record.c: Fix indentation.
* reggroups.c: Fix indentation.
* regset.h: Fix indentation.
* remote-fileio.c: Fix indentation.
* remote.c: Fix indentation.
* reverse.c: Fix indentation.
* riscv-linux-tdep.c: Fix indentation.
* riscv-ravenscar-thread.c: Fix indentation.
* riscv-tdep.c: Fix indentation.
* rl78-tdep.c: Fix indentation.
* rs6000-aix-tdep.c: Fix indentation.
* rs6000-lynx178-tdep.c: Fix indentation.
* rs6000-nat.c: Fix indentation.
* rs6000-tdep.c: Fix indentation.
* rust-lang.c: Fix indentation.
* rx-tdep.c: Fix indentation.
* s12z-tdep.c: Fix indentation.
* s390-linux-tdep.c: Fix indentation.
* score-tdep.c: Fix indentation.
* ser-base.c: Fix indentation.
* ser-mingw.c: Fix indentation.
* ser-uds.c: Fix indentation.
* ser-unix.c: Fix indentation.
* serial.c: Fix indentation.
* sh-linux-tdep.c: Fix indentation.
* sh-nbsd-tdep.c: Fix indentation.
* sh-tdep.c: Fix indentation.
* skip.c: Fix indentation.
* sol-thread.c: Fix indentation.
* solib-aix.c: Fix indentation.
* solib-darwin.c: Fix indentation.
* solib-frv.c: Fix indentation.
* solib-svr4.c: Fix indentation.
* solib.c: Fix indentation.
* source.c: Fix indentation.
* sparc-linux-tdep.c: Fix indentation.
* sparc-nbsd-tdep.c: Fix indentation.
* sparc-obsd-tdep.c: Fix indentation.
* sparc-ravenscar-thread.c: Fix indentation.
* sparc-tdep.c: Fix indentation.
* sparc64-linux-tdep.c: Fix indentation.
* sparc64-nbsd-tdep.c: Fix indentation.
* sparc64-obsd-tdep.c: Fix indentation.
* sparc64-tdep.c: Fix indentation.
* stabsread.c: Fix indentation.
* stack.c: Fix indentation.
* stap-probe.c: Fix indentation.
* stubs/ia64vms-stub.c: Fix indentation.
* stubs/m32r-stub.c: Fix indentation.
* stubs/m68k-stub.c: Fix indentation.
* stubs/sh-stub.c: Fix indentation.
* stubs/sparc-stub.c: Fix indentation.
* symfile-mem.c: Fix indentation.
* symfile.c: Fix indentation.
* symfile.h: Fix indentation.
* symmisc.c: Fix indentation.
* symtab.c: Fix indentation.
* symtab.h: Fix indentation.
* target-float.c: Fix indentation.
* target.c: Fix indentation.
* target.h: Fix indentation.
* tic6x-tdep.c: Fix indentation.
* tilegx-linux-tdep.c: Fix indentation.
* tilegx-tdep.c: Fix indentation.
* top.c: Fix indentation.
* tracefile-tfile.c: Fix indentation.
* tracepoint.c: Fix indentation.
* tui/tui-disasm.c: Fix indentation.
* tui/tui-io.c: Fix indentation.
* tui/tui-regs.c: Fix indentation.
* tui/tui-stack.c: Fix indentation.
* tui/tui-win.c: Fix indentation.
* tui/tui-winsource.c: Fix indentation.
* tui/tui.c: Fix indentation.
* typeprint.c: Fix indentation.
* ui-out.h: Fix indentation.
* unittests/copy_bitwise-selftests.c: Fix indentation.
* unittests/memory-map-selftests.c: Fix indentation.
* utils.c: Fix indentation.
* v850-tdep.c: Fix indentation.
* valarith.c: Fix indentation.
* valops.c: Fix indentation.
* valprint.c: Fix indentation.
* valprint.h: Fix indentation.
* value.c: Fix indentation.
* value.h: Fix indentation.
* varobj.c: Fix indentation.
* vax-tdep.c: Fix indentation.
* windows-nat.c: Fix indentation.
* windows-tdep.c: Fix indentation.
* xcoffread.c: Fix indentation.
* xml-syscall.c: Fix indentation.
* xml-tdesc.c: Fix indentation.
* xstormy16-tdep.c: Fix indentation.
* xtensa-config.c: Fix indentation.
* xtensa-linux-nat.c: Fix indentation.
* xtensa-linux-tdep.c: Fix indentation.
* xtensa-tdep.c: Fix indentation.
gdbserver/ChangeLog:
* ax.cc: Fix indentation.
* dll.cc: Fix indentation.
* inferiors.h: Fix indentation.
* linux-low.cc: Fix indentation.
* linux-nios2-low.cc: Fix indentation.
* linux-ppc-ipa.cc: Fix indentation.
* linux-ppc-low.cc: Fix indentation.
* linux-x86-low.cc: Fix indentation.
* linux-xtensa-low.cc: Fix indentation.
* regcache.cc: Fix indentation.
* server.cc: Fix indentation.
* tracepoint.cc: Fix indentation.
gdbsupport/ChangeLog:
* common-exceptions.h: Fix indentation.
* event-loop.cc: Fix indentation.
* fileio.cc: Fix indentation.
* filestuff.cc: Fix indentation.
* gdb-dlfcn.cc: Fix indentation.
* gdb_string_view.h: Fix indentation.
* job-control.cc: Fix indentation.
* signals.cc: Fix indentation.
Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
|
|
Since we converted gdbarch_make_corefile_notes to returning a
gdb::unique_xmalloc_ptr, I figured it would make sense to converted
target_ops::make_corefile_notes as well.
The only implementation of that is in procfs.c, and it should ideally be
re-written as a gdbarch method (see comment in write_gcore_file_1), but
in the mean time I guess it doesn't hurt to throw some unique pointer at
it.
I tested that it builds on Solaris 11 (gcc compile farm machine gcc211),
but I am not able to test it, because I can't get GDB to start a
process (I'll look at that separately).
gdb/ChangeLog:
* target.h (struct target_ops) <make_corefile_notes>:
Change return type to unique pointer.
* target.c (dummy_make_corefile_notes): Likewise.
* exec.c (struct exec_target) <make_corefile_notes>:
Likewise.
(exec_target::make_corefile_notes): Likewise.
* procfs.c (class procfs_target) <make_corefile_notes>:
Likewise.
(procfs_do_thread_registers): Adjust to unique pointer.
(struct procfs_corefile_thread_data): Add constructor.
<note_data>: Change type to unique pointer.
(procfs_corefile_thread_callback): Adjust to unique pointer.
(procfs_target::make_corefile_notes): Change return type to
unique pointer.
* target-delegates.c: Re-generate.
* gcore.c (write_gcore_file_1): Adjust.
* target-debug.h (target_debug_print_gdb_unique_xmalloc_ptr_char):
New.
Change-Id: I768fb17ac0f7adc67d2fe95e952c784fe0ac37ab
|
|
Because target_section_table only holds a vector, and because it is
used in an "open" way, this patch makes it just be an alias for the
std::vector specialization. This makes the code less wordy. If we do
ever want to add more specialized behavior to this type, it's simple
enough to convert it back to a struct with the few needed methods
implied by this change.
gdb/ChangeLog
2020-10-12 Tom Tromey <tom@tromey.com>
* target.h (struct target_ops) <get_section_table>: Update.
(target_get_section_table): Update.
* target.c (target_get_section_table, target_section_by_addr)
(memory_xfer_partial_1): Update.
* target-section.h (target_section_table): Now an alias.
* target-delegates.c: Rebuild.
* target-debug.h (target_debug_print_target_section_table_p):
Rename from target_debug_print_struct_target_section_table_p.
* symfile.c (build_section_addr_info_from_section_table): Update.
* solib.c (solib_map_sections, solib_contains_address_p): Update.
* solib-svr4.c (scan_dyntag): Update.
* solib-dsbt.c (scan_dyntag): Update.
* remote.c (remote_target::remote_xfer_live_readonly_partial):
Update.
* record-full.c (record_full_core_target::xfer_partial): Update.
* progspace.h (struct program_space) <target_sections>: Update.
* exec.h (print_section_info): Update.
* exec.c (exec_target::close, build_section_table)
(add_target_sections, add_target_sections_of_objfile)
(remove_target_sections, exec_on_vfork)
(section_table_available_memory)
(section_table_xfer_memory_partial)
(exec_target::get_section_table, exec_target::xfer_partial)
(print_section_info, set_section_command)
(exec_set_section_address, exec_target::has_memory): Update.
* corelow.c (core_target::build_file_mappings)
(core_target::xfer_partial, core_target::info_proc_mappings)
(core_target::info_proc_mappings): Update.
* bfd-target.c (class target_bfd): Update
|
|
This introduces a new target-section.h file. This makes some of the
later patches in this series a bit cleaner, because new includes of
target.h won't be required. Also I think it's better to have small
header files for each separate data structure.
gdb/ChangeLog
2020-10-12 Tom Tromey <tom@tromey.com>
* target.h (struct target_section, struct target_section_table):
Move to target-section.h.
* target-section.h: New file.
|
|
This moves the simple_search_memory function to a new file,
gdbsupport/search.cc. The API is slightly changed to make it more
general. This generality is useful for wiring it to gdbserver, and
also for unit testing.
gdb/ChangeLog
2020-10-07 Tom Tromey <tromey@adacore.com>
* target.h (simple_search_memory): Don't declare.
* target.c (simple_search_memory): Move to gdbsupport.
(default_search_memory): Update.
* remote.c (remote_target::search_memory): Update.
gdbsupport/ChangeLog
2020-10-07 Tom Tromey <tromey@adacore.com>
* Makefile.in: Rebuild.
* Makefile.am (libgdbsupport_a_SOURCES): Add search.cc.
* search.h: New file.
* search.cc: New file.
|
|
This changes the object-like macro target_have_steppable_watchpoint
into an inline function.
gdb/ChangeLog
2020-09-28 Tom Tromey <tom@tromey.com>
* infrun.c (displaced_step_fixup, thread_still_needs_step_over)
(handle_signal_stop): Update.
* procfs.c (procfs_target::insert_watchpoint): Update.
* target.h (target_have_steppable_watchpoint): Now a function.
|
|
This changes the object-like macro target_can_lock_scheduler into an
inline function.
gdb/ChangeLog
2020-09-28 Tom Tromey <tom@tromey.com>
* infrun.c (set_schedlock_func): Update.
* target.h (target_can_lock_scheduler): Now a function.
|
|
This removes the object-like macro target_has_execution, replacing it
with a function call. target_has_execution_current is also now
handled by this function.
gdb/ChangeLog
2020-09-28 Tom Tromey <tom@tromey.com>
* inferior.h (class inferior) <has_execution>: Update.
* windows-tdep.c (windows_solib_create_inferior_hook): Update.
* valops.c (find_function_in_inferior)
(value_allocate_space_in_inferior): Update.
* top.c (kill_or_detach): Update.
* target.c (target_preopen, set_target_permissions): Update.
(target_has_execution_current): Remove.
* sparc64-tdep.c (adi_examine_command, adi_assign_command):
Update.
* solib.c (update_solib_list, reload_shared_libraries): Update.
* solib-svr4.c (svr4_solib_create_inferior_hook): Update.
* solib-dsbt.c (enable_break): Update.
* score-tdep.c (score7_fetch_inst): Update.
* rs6000-nat.c (rs6000_nat_target::xfer_shared_libraries):
Update.
* remote.c (remote_target::start_remote)
(remote_target::remote_check_symbols, remote_target::open_1)
(remote_target::remote_detach_1, remote_target::verify_memory)
(remote_target::xfer_partial, remote_target::read_description)
(remote_target::get_min_fast_tracepoint_insn_len): Update.
* record-full.c (record_full_open_1): Update.
* record-btrace.c (record_btrace_target_open): Update.
* objc-lang.c (lookup_objc_class, lookup_child_selector)
(value_nsstring): Update.
* linux-thread-db.c (add_thread_db_info)
(thread_db_find_new_threads_silently, check_thread_db_callback)
(try_thread_db_load_1, record_thread): Update.
* linux-tdep.c (linux_info_proc, linux_vsyscall_range_raw):
Update.
* linux-fork.c (checkpoint_command): Update.
* infrun.c (set_non_stop, set_observer_mode)
(check_multi_target_resumption, for_each_just_stopped_thread)
(maybe_remove_breakpoints, normal_stop)
(class infcall_suspend_state): Update.
* infcmd.c (ERROR_NO_INFERIOR, kill_if_already_running)
(info_program_command, attach_command): Update.
* infcall.c (call_function_by_hand_dummy): Update.
* inf-loop.c (inferior_event_handler): Update.
* gcore.c (gcore_command, derive_heap_segment): Update.
* exec.c (exec_file_command): Update.
* eval.c (evaluate_subexp): Update.
* compile/compile.c (compile_to_object): Update.
* cli/cli-dump.c (restore_command): Update.
* breakpoint.c (update_watchpoint)
(update_inserted_breakpoint_locations)
(insert_breakpoint_locations, get_bpstat_thread): Update.
* target.h (target_has_execution): Remove macro.
(target_has_execution_current): Don't declare.
(target_has_execution): Rename from target_has_execution_1. Add
argument default.
|
|
This changes target_can_execute_reverse from an object-like macro to
an inline function.
gdb/ChangeLog
2020-09-28 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (exec_reverse_continue)
(mi_cmd_list_target_features): Update.
* infrun.c (set_exec_direction_func): Update.
* target.c (default_execution_direction): Update.
* reverse.c (exec_reverse_once): Update.
* target.h (target_can_execute_reverse): Now a function.
|
|
This removes the target_has_registers object-like macro, replacing it
with the underlying function.
gdb/ChangeLog
2020-09-28 Tom Tromey <tom@tromey.com>
* tui/tui-regs.c (tui_get_register)
(tui_data_window::show_registers): Update.
* thread.c (scoped_restore_current_thread::restore)
(scoped_restore_current_thread::scoped_restore_current_thread):
Update.
* regcache-dump.c (regcache_print): Update.
* python/py-finishbreakpoint.c (bpfinishpy_detect_out_scope_cb):
Update.
* mi/mi-main.c (mi_cmd_data_write_register_values): Update.
* mep-tdep.c (current_me_module, current_options): Update.
* linux-thread-db.c (thread_db_load): Update.
* infcmd.c (registers_info, info_vector_command)
(info_float_command): Update.
* ia64-tdep.c (ia64_frame_prev_register)
(ia64_sigtramp_frame_prev_register): Update.
* ia64-libunwind-tdep.c (libunwind_frame_prev_register): Update.
* gcore.c (derive_stack_segment): Update.
* frame.c (get_current_frame, has_stack_frames): Update.
* findvar.c (language_defn::read_var_value): Update.
* arm-tdep.c (arm_pc_is_thumb): Update.
* target.c (target_has_registers): Rename from
target_has_registers_1.
* target.h (target_has_registers): Remove macro.
(target_has_registers): Rename from target_has_registers_1.
|
|
This removes the target_has_stack object-like macro, replacing it with
the underlying function.
gdb/ChangeLog
2020-09-28 Tom Tromey <tom@tromey.com>
* windows-tdep.c (tlb_make_value): Update.
* tui/tui-regs.c (tui_data_window::show_registers): Update.
* thread.c (scoped_restore_current_thread::restore)
(scoped_restore_current_thread::scoped_restore_current_thread)
(thread_command): Update.
* stack.c (backtrace_command_1, frame_apply_level_command)
(frame_apply_all_command, frame_apply_command): Update.
* infrun.c (siginfo_make_value, restore_infcall_control_state):
Update.
* gcore.c (derive_stack_segment): Update.
* frame.c (get_current_frame, has_stack_frames): Update.
* auxv.c (info_auxv_command): Update.
* ada-tasks.c (ada_build_task_list): Update.
* target.c (target_has_stack): Rename from target_has_stack_1.
* target.h (target_has_stack): Remove macro.
(target_has_stack): Rename from target_has_stack_1.
|
