| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
While debugging gdb, I printed the target stack and got:
(top-gdb) p g_target_stack
$10 = {
m_top = thread_stratum,
m_stack = {0x142b0b0, 0x13da600 <exec_ops>, 0x1c70690, 0x13d63b0 <ravenscar_ops>, 0x0, 0x0, 0x0}
}
(This is clearly from before the change to make ravenscar
multi-target-capable.)
Here, 0x142b0b0 is the singleton dummy target. It seems to me that
since this is always a singleton, it would be a bit nicer if it were a
global, so that it would be noted in the above.
This patch implements this idea, and now I get:
(top-gdb) p g_target_stack
$2 = {
m_top = dummy_stratum,
m_stack = {0x1f1b040 <the_dummy_target>, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}
}
I did not do the same for the debug target. It didn't seem as useful
to me.
gdb/ChangeLog
2019-03-05 Tom Tromey <tromey@adacore.com>
* target.c (the_dummy_target): Move later. Change type to
"dummy_target".
(initialize_targets): Don't initialize the_dummy_target.
|
|
A customer noticed some mildly odd MI output, where CLI output was
split into multiple MI strings at unusual boundaries, like this:
~"$1 = (b => true"
~", p => 0x407260"
This is technically correct according to the MI spec, but still
unusual, in that there's no particular reason for the string to be
split where it is.
I tracked this down to a call to gdb_flush in generic_val_print.
Then, I went through all calls to gdb_flush and removed the ones I
thought were superfluous. In particular:
* Any call in the value-printing code;
* Likewise the type-printing code (just a single call); and
* Any call that immediately followed a printf that obviously
ended with a newline, my belief being that gdb's standard output
streams are line buffered (by inheriting the behavior from stdio)
Regression tested on x86-64 Fedora 29.
I didn't add a new test case. I tend to think we don't necessarily
want to specify this behavior in the tests. Let me know what you
think of this.
gdb/ChangeLog
2019-03-05 Tom Tromey <tromey@adacore.com>
* windows-nat.c (windows_nat_target::attach)
(windows_nat_target::detach): Don't call gdb_flush.
* valprint.c (generic_val_print, val_print, val_print_string):
Don't call gdb_flush.
* utils.c (defaulted_query): Don't call gdb_flush.
* typeprint.c (print_type_scalar): Don't call gdb_flush.
* target.c (target_announce_detach): Don't call gdb_flush.
* sparc64-tdep.c (adi_print_versions): Don't call gdb_flush.
* remote.c (extended_remote_target::attach): Don't call
gdb_flush.
* procfs.c (procfs_target::detach): Don't call gdb_flush.
* printcmd.c (do_examine): Don't call gdb_flush.
(info_display_command): Don't call gdb_flush.
* p-valprint.c (pascal_val_print): Don't call gdb_flush.
* nto-procfs.c (nto_procfs_target::attach): Don't call gdb_flush.
* memattr.c (info_mem_command): Don't call gdb_flush.
* mdebugread.c (mdebug_build_psymtabs): Don't call gdb_flush.
* m2-valprint.c (m2_val_print): Don't call gdb_flush.
* infrun.c (follow_exec, handle_command): Don't call gdb_flush.
* inf-ptrace.c (inf_ptrace_target::attach): Don't call gdb_flush.
* hppa-tdep.c (unwind_command): Don't call gdb_flush.
* gnu-nat.c (gnu_nat_target::attach): Don't call gdb_flush.
(gnu_nat_target::detach): Don't call gdb_flush.
* f-valprint.c (f_val_print): Don't call gdb_flush.
* darwin-nat.c (darwin_nat_target::attach): Don't call gdb_flush.
* cli/cli-script.c (read_command_lines): Don't call gdb_flush.
* cli/cli-cmds.c (shell_escape, print_disassembly): Don't call
gdb_flush.
* c-valprint.c (c_val_print): Don't call gdb_flush.
* ada-valprint.c (ada_print_scalar): Don't call gdb_flush.
|
|
Valgrind reports leaks like the below in various tests,
e.g. gdb.threads/attach-slow-waitpid.exp, gdb.ada/task_switch_in_core.exp, ...
Fix the leak by clearing the regcache when detaching from an inferior.
Note that these leaks are 'created' when GDB exits,
when the regcache::current_regcache is destroyed : the elements
of the forward_list are pointers, and the 'pointed to' memory is not
deleted by the forward_list destructor.
Nevertheless, fixing this leak is good as it makes a bunch of
tests 'leak clean'.
Also, it seems strange to keep a register cache for a process from
which GDB detached : it is not clear if this cache is still valid
after detach. And effectively, when clearing only the regcache,
(and not the frame cache), then the frame cache was still 'pointing'
at this regcache and was used when switching to the child process
in the test gdb.threads/watchpoint-fork.exp, which seems strange.
So, we solve the leak and avoid possible accesses to the regcache
and frame cache of the detached inferior, by clearing both the
regcache and the frame cache.
Tested on debian/amd64, natively, under Valgrind,
and with make check RUNTESTFLAGS="--target_board=native-gdbserver".
==27679== VALGRIND_GDB_ERROR_BEGIN
==27679== 1,123 (72 direct, 1,051 indirect) bytes in 1 blocks are definitely lost in loss record 2,942 of 3,400
==27679== at 0x4C2C4CC: operator new(unsigned long) (vg_replace_malloc.c:344)
==27679== by 0x5CDF71: get_thread_arch_aspace_regcache(ptid_t, gdbarch*, address_space*) (regcache.c:330)
==27679== by 0x5CE12A: get_thread_regcache (regcache.c:366)
==27679== by 0x5CE12A: get_current_regcache() (regcache.c:372)
==27679== by 0x4FF63D: post_create_inferior(target_ops*, int) (infcmd.c:452)
==27679== by 0x43AF62: core_target_open(char const*, int) (corelow.c:458)
==27679== by 0x408B68: cmd_func(cmd_list_element*, char const*, int) (cli-decode.c:1892)
...
gdb/ChangeLog
2019-02-27 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* target.c (target_detach): Clear the regcache and the
frame cache.
|
|
This adds a push_target overload that takes a "target_ops_up &&".
This removes some calls to release a target_ops_up, and makes the
intent here clearer.
gdb/ChangeLog
2019-02-15 Tom Tromey <tromey@adacore.com>
* target.h (push_target): Declare new overload.
* target.c (push_target): New overload, taking an rvalue reference.
* remote.c (remote_target::open_1): Use push_target overload.
* corelow.c (core_target_open): Use push_target overload.
|
|
I noticed that target_stack::unpush first uses the target "t", then
later asserts that it is non-NULL:
strata stratum = t->stratum ();
[...]
gdb_assert (t != NULL);
This is backwards, though, as the assertion must come first.
gdb/ChangeLog
2019-02-05 Tom Tromey <tom@tromey.com>
* target.c (target_stack::unpush): Move assertion earlier.
|
|
This changes all includes to use the form "common/filename.h" rather
than just "filename.h". This was written by a script.
gdb/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* xtensa-linux-nat.c: Fix common/ includes.
* xml-support.h: Fix common/ includes.
* xml-support.c: Fix common/ includes.
* x86-linux-nat.c: Fix common/ includes.
* windows-nat.c: Fix common/ includes.
* varobj.h: Fix common/ includes.
* varobj.c: Fix common/ includes.
* value.c: Fix common/ includes.
* valops.c: Fix common/ includes.
* utils.c: Fix common/ includes.
* unittests/xml-utils-selftests.c: Fix common/ includes.
* unittests/utils-selftests.c: Fix common/ includes.
* unittests/unpack-selftests.c: Fix common/ includes.
* unittests/tracepoint-selftests.c: Fix common/ includes.
* unittests/style-selftests.c: Fix common/ includes.
* unittests/string_view-selftests.c: Fix common/ includes.
* unittests/scoped_restore-selftests.c: Fix common/ includes.
* unittests/scoped_mmap-selftests.c: Fix common/ includes.
* unittests/scoped_fd-selftests.c: Fix common/ includes.
* unittests/rsp-low-selftests.c: Fix common/ includes.
* unittests/parse-connection-spec-selftests.c: Fix common/
includes.
* unittests/optional-selftests.c: Fix common/ includes.
* unittests/offset-type-selftests.c: Fix common/ includes.
* unittests/observable-selftests.c: Fix common/ includes.
* unittests/mkdir-recursive-selftests.c: Fix common/ includes.
* unittests/memrange-selftests.c: Fix common/ includes.
* unittests/memory-map-selftests.c: Fix common/ includes.
* unittests/lookup_name_info-selftests.c: Fix common/ includes.
* unittests/function-view-selftests.c: Fix common/ includes.
* unittests/environ-selftests.c: Fix common/ includes.
* unittests/copy_bitwise-selftests.c: Fix common/ includes.
* unittests/common-utils-selftests.c: Fix common/ includes.
* unittests/cli-utils-selftests.c: Fix common/ includes.
* unittests/array-view-selftests.c: Fix common/ includes.
* ui-file.c: Fix common/ includes.
* tui/tui-io.c: Fix common/ includes.
* tracepoint.h: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* tracefile-tfile.c: Fix common/ includes.
* top.h: Fix common/ includes.
* top.c: Fix common/ includes.
* thread.c: Fix common/ includes.
* target/waitstatus.h: Fix common/ includes.
* target/waitstatus.c: Fix common/ includes.
* target.h: Fix common/ includes.
* target.c: Fix common/ includes.
* target-memory.c: Fix common/ includes.
* target-descriptions.c: Fix common/ includes.
* symtab.h: Fix common/ includes.
* symfile.c: Fix common/ includes.
* stap-probe.c: Fix common/ includes.
* spu-linux-nat.c: Fix common/ includes.
* sparc-nat.c: Fix common/ includes.
* source.c: Fix common/ includes.
* solib.c: Fix common/ includes.
* solib-target.c: Fix common/ includes.
* ser-unix.c: Fix common/ includes.
* ser-tcp.c: Fix common/ includes.
* ser-pipe.c: Fix common/ includes.
* ser-base.c: Fix common/ includes.
* selftest-arch.c: Fix common/ includes.
* s12z-tdep.c: Fix common/ includes.
* rust-exp.y: Fix common/ includes.
* rs6000-aix-tdep.c: Fix common/ includes.
* riscv-tdep.c: Fix common/ includes.
* remote.c: Fix common/ includes.
* remote-notif.h: Fix common/ includes.
* remote-fileio.h: Fix common/ includes.
* remote-fileio.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* record-btrace.c: Fix common/ includes.
* python/python.c: Fix common/ includes.
* python/py-type.c: Fix common/ includes.
* python/py-inferior.c: Fix common/ includes.
* progspace.h: Fix common/ includes.
* producer.c: Fix common/ includes.
* procfs.c: Fix common/ includes.
* proc-api.c: Fix common/ includes.
* printcmd.c: Fix common/ includes.
* ppc-linux-nat.c: Fix common/ includes.
* parser-defs.h: Fix common/ includes.
* osdata.c: Fix common/ includes.
* obsd-nat.c: Fix common/ includes.
* nat/x86-linux.c: Fix common/ includes.
* nat/x86-linux-dregs.c: Fix common/ includes.
* nat/x86-dregs.h: Fix common/ includes.
* nat/x86-dregs.c: Fix common/ includes.
* nat/ppc-linux.c: Fix common/ includes.
* nat/mips-linux-watch.h: Fix common/ includes.
* nat/mips-linux-watch.c: Fix common/ includes.
* nat/linux-waitpid.c: Fix common/ includes.
* nat/linux-ptrace.h: Fix common/ includes.
* nat/linux-ptrace.c: Fix common/ includes.
* nat/linux-procfs.c: Fix common/ includes.
* nat/linux-personality.c: Fix common/ includes.
* nat/linux-osdata.c: Fix common/ includes.
* nat/linux-namespaces.c: Fix common/ includes.
* nat/linux-btrace.h: Fix common/ includes.
* nat/linux-btrace.c: Fix common/ includes.
* nat/fork-inferior.c: Fix common/ includes.
* nat/amd64-linux-siginfo.c: Fix common/ includes.
* nat/aarch64-sve-linux-ptrace.c: Fix common/ includes.
* nat/aarch64-linux.c: Fix common/ includes.
* nat/aarch64-linux-hw-point.h: Fix common/ includes.
* nat/aarch64-linux-hw-point.c: Fix common/ includes.
* namespace.h: Fix common/ includes.
* mips-linux-tdep.c: Fix common/ includes.
* minsyms.c: Fix common/ includes.
* mi/mi-parse.h: Fix common/ includes.
* mi/mi-main.c: Fix common/ includes.
* mi/mi-cmd-env.c: Fix common/ includes.
* memrange.h: Fix common/ includes.
* memattr.c: Fix common/ includes.
* maint.h: Fix common/ includes.
* maint.c: Fix common/ includes.
* main.c: Fix common/ includes.
* machoread.c: Fix common/ includes.
* location.c: Fix common/ includes.
* linux-thread-db.c: Fix common/ includes.
* linux-nat.c: Fix common/ includes.
* linux-fork.c: Fix common/ includes.
* inline-frame.c: Fix common/ includes.
* infrun.c: Fix common/ includes.
* inflow.c: Fix common/ includes.
* inferior.h: Fix common/ includes.
* inferior.c: Fix common/ includes.
* infcmd.c: Fix common/ includes.
* inf-ptrace.c: Fix common/ includes.
* inf-child.c: Fix common/ includes.
* ia64-linux-nat.c: Fix common/ includes.
* i387-tdep.c: Fix common/ includes.
* i386-tdep.c: Fix common/ includes.
* i386-linux-tdep.c: Fix common/ includes.
* i386-linux-nat.c: Fix common/ includes.
* i386-go32-tdep.c: Fix common/ includes.
* i386-fbsd-tdep.c: Fix common/ includes.
* i386-fbsd-nat.c: Fix common/ includes.
* guile/scm-type.c: Fix common/ includes.
* guile/guile.c: Fix common/ includes.
* go32-nat.c: Fix common/ includes.
* gnu-nat.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbarch-selftests.c: Fix common/ includes.
* gdb_usleep.c: Fix common/ includes.
* gdb_select.h: Fix common/ includes.
* gdb_bfd.c: Fix common/ includes.
* gcore.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* findvar.c: Fix common/ includes.
* fbsd-nat.c: Fix common/ includes.
* event-top.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* dwarf2read.c: Fix common/ includes.
* dwarf2loc.c: Fix common/ includes.
* dwarf2-frame.c: Fix common/ includes.
* dwarf-index-cache.c: Fix common/ includes.
* dtrace-probe.c: Fix common/ includes.
* disasm-selftests.c: Fix common/ includes.
* defs.h: Fix common/ includes.
* csky-tdep.c: Fix common/ includes.
* cp-valprint.c: Fix common/ includes.
* cp-support.h: Fix common/ includes.
* cp-support.c: Fix common/ includes.
* corelow.c: Fix common/ includes.
* completer.h: Fix common/ includes.
* completer.c: Fix common/ includes.
* compile/compile.c: Fix common/ includes.
* compile/compile-loc2c.c: Fix common/ includes.
* compile/compile-cplus-types.c: Fix common/ includes.
* compile/compile-cplus-symbols.c: Fix common/ includes.
* command.h: Fix common/ includes.
* cli/cli-dump.c: Fix common/ includes.
* cli/cli-cmds.c: Fix common/ includes.
* charset.c: Fix common/ includes.
* build-id.c: Fix common/ includes.
* btrace.h: Fix common/ includes.
* btrace.c: Fix common/ includes.
* breakpoint.h: Fix common/ includes.
* breakpoint.c: Fix common/ includes.
* ax.h:
(enum agent_op): Fix common/ includes.
* ax-general.c (struct aop_map): Fix common/ includes.
* ax-gdb.c: Fix common/ includes.
* auxv.c: Fix common/ includes.
* auto-load.c: Fix common/ includes.
* arm-tdep.c: Fix common/ includes.
* arch/riscv.c: Fix common/ includes.
* arch/ppc-linux-common.c: Fix common/ includes.
* arch/i386.c: Fix common/ includes.
* arch/arm.c: Fix common/ includes.
* arch/arm-linux.c: Fix common/ includes.
* arch/arm-get-next-pcs.c: Fix common/ includes.
* arch/amd64.c: Fix common/ includes.
* arch/aarch64.c: Fix common/ includes.
* arch/aarch64-insn.c: Fix common/ includes.
* arch-utils.c: Fix common/ includes.
* amd64-windows-tdep.c: Fix common/ includes.
* amd64-tdep.c: Fix common/ includes.
* amd64-sol2-tdep.c: Fix common/ includes.
* amd64-obsd-tdep.c: Fix common/ includes.
* amd64-nbsd-tdep.c: Fix common/ includes.
* amd64-linux-tdep.c: Fix common/ includes.
* amd64-linux-nat.c: Fix common/ includes.
* amd64-fbsd-tdep.c: Fix common/ includes.
* amd64-fbsd-nat.c: Fix common/ includes.
* amd64-dicos-tdep.c: Fix common/ includes.
* amd64-darwin-tdep.c: Fix common/ includes.
* agent.c: Fix common/ includes.
* ada-lang.h: Fix common/ includes.
* ada-lang.c: Fix common/ includes.
* aarch64-tdep.c: Fix common/ includes.
gdb/gdbserver/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* win32-low.c: Fix common/ includes.
* win32-i386-low.c: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* thread-db.c: Fix common/ includes.
* target.h: Fix common/ includes.
* symbol.c: Fix common/ includes.
* spu-low.c: Fix common/ includes.
* server.h: Fix common/ includes.
* server.c: Fix common/ includes.
* remote-utils.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* nto-x86-low.c: Fix common/ includes.
* notif.h: Fix common/ includes.
* mem-break.h: Fix common/ includes.
* lynx-low.c: Fix common/ includes.
* lynx-i386-low.c: Fix common/ includes.
* linux-x86-tdesc-selftest.c: Fix common/ includes.
* linux-x86-low.c: Fix common/ includes.
* linux-low.c: Fix common/ includes.
* inferiors.h: Fix common/ includes.
* i387-fp.c: Fix common/ includes.
* hostio.c: Fix common/ includes.
* hostio-errno.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbreplay.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* ax.c:
(enum gdb_agent_op): Fix common/ includes.
|
|
This replaces the pointer and length parameters of target_pass_signals
and target_program_signals with a gdb::array_view parameter, and fixes
the fallout.
In infrun.c, the signal_stop, signal_print, signal_program,
signal_catch, signal_pass globals are currently pointers to
heap-allocated memory. I see no point in that, so I converted them to
arrays. This allows simplifying the calls to
target_pass_signals/target_program_signals, since we can pass the
array directly, which can implicitly convert to gdb::array_view.
gdb/ChangeLog:
2019-01-24 Pedro Alves <palves@redhat.com>
* infrun.c (signal_stop, signal_print, signal_program)
(signal_catch, signal_pass): Now arrays instead of pointers.
(update_signals_program_target, do_target_resume)
(signal_catch_update, handle_command, _initialize_infrun): Adjust.
* linux-nat.c (linux_nat_target::pass_signals)
(linux_nat_target::create_inferior, linux_nat_target::attach):
Adjust.
* linux-nat.h (linux_nat_target::pass_signals): Adjust.
* nto-procfs.c (nto_procfs_target::pass_signals): Adjust.
* procfs.c (procfs_target::pass_signals): Adjust.
* record-full.c (record_full_target::resume): Adjust.
* remote.c (remote_target::pass_signals)
(remote_target::program_signals): Adjust.
* target-debug.h (target_debug_print_signals): Now takes a
gdb::array_view as parameter. Adjust.
* target.h (target_ops) <pass_signals, program_signals>: Replace
pointer and length parameters with gdb::array_view.
(target_pass_signals, target_program_signals): Likewise.
* target-delegates.c: Regenerate.
|
|
I wrote a little script to detect duplicate or commented-out #includes
and ran it on gdb. This patch is the result. Tested by rebuilding.
gdb/ChangeLog
2019-01-21 Tom Tromey <tom@tromey.com>
* ui-out.c: Fix includes.
* tui/tui-source.c: Fix includes.
* target.c: Fix includes.
* remote.c: Fix includes.
* regcache.c: Fix includes.
* python/py-block.c: Fix includes.
* printcmd.c: Fix includes.
* or1k-tdep.c: Fix includes.
* mi/mi-main.c: Fix includes.
* m32r-tdep.c: Fix includes.
* csky-tdep.c: Fix includes.
* compile/compile-cplus-types.c: Fix includes.
* cli/cli-interp.c: Fix includes.
gdb/gdbserver/ChangeLog
2019-01-21 Tom Tromey <tom@tromey.com>
* tracepoint.c: Fix includes.
* remote-utils.c: Fix includes.
* linux-x86-low.c: Fix includes.
gdb/stubs/ChangeLog
2019-01-21 Tom Tromey <tom@tromey.com>
* ia64vms-stub.c: Fix includes.
|
|
This constifies the final parameter to target_pass_signals and
target_program_signals and updates the rest of gdb.
Note that I have no way to test the nto-procfs.c change.
gdb/ChangeLog
2019-01-14 Tom Tromey <tom@tromey.com>
* target-debug.h (target_debug_print_signals): Constify.
* nto-procfs.c (nto_procfs_target::pass_signals): Update.
* procfs.c (procfs_target::pass_signals): Update.
* linux-nat.c (linux_nat_target::pass_signals): Update.
* linux-nat.h (class linux_nat_target) <pass_signals>: Update.
* target-delegates.c: Rebuild.
* remote.c (remote_target::program_signals): Update.
(remote_target::pass_signals): Update.
* target.c (target_pass_signals): Constify argument.
(target_program_signals): Likewise.
* target.h (struct target_ops) <pass_signals, program_signals>:
Constify argument.
(target_pass_signals, target_program_signals): Constify argument.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
I get this when compiling with a gcc 6.3.0-based cross-compiler:
CXX target.o
/home/simark/src/binutils-gdb/gdb/target.c: In static member function 'static void target_terminal::restore_inferior()':
/home/simark/src/binutils-gdb/gdb/target.c:396:10: error: types may not be defined in a for-range-declaration [-Werror]
for (struct inferior *inf : all_inferiors ())
^~~~~~
Accomodate it by dropping the unnecessary struct keyword. Actually, I used
"::inferior", otherwise it resolves to the inferior method of the
target_terminal class.
gdb/ChangeLog:
* target.c (target_terminal::restore_inferior): Remove struct keyword.
|
|
Running `info os someUnknownOsType` is crashing when gdb is built with
-D_GLIBCXX_DEBUG:
/usr/include/c++/5/debug/vector:439:error: attempt to
access an element in an empty container.
In target_read_stralloc from target.c, the call to
target_read_alloc_1 can return an empty vector, we then call vector::back on
this vector, which is invalid.
This commit adds a check for emptiness before trying to call
vector::back on it. It also adds test to check for `info os <unknown>`
to return the proper error message.
This is a regression in gdb 8.2 and this patch restores the behavior of
previous versions.
gdb/ChangeLog:
PR gdb/23974
* target.c (target_read_stralloc): Check for empty vector.
gdb/testsuite/ChangeLog:
PR gdb/23974
* gdb.base/info-os.exp: Check return for unknown "info os" type.
|
|
Given that a target's stratum is a property of the type, and not of an
instance of the type, get rid of to_stratum data field and replace it
with a virtual method.
I.e., when we have e.g., 10 target remote instances active, there's no
need for each of the instances to have their own to_stratum copy.
gdb/ChangeLog:
2018-11-30 Pedro Alves <palves@redhat.com>
* aix-thread.c (aix_thread_target) <aix_thread_target>: Delete.
<stratum>: New override.
* bfd-target.c (aix_thread_target) <aix_thread_target>: Delete.
<stratum>: New override.
* bsd-uthread.c (bsd_uthread_target) <bsd_uthread_target>: Delete.
<stratum>: New override.
* exec.c (exec_target) <exec_target>: Delete.
<stratum>: New override.
* gdbarch-selftests.c (register_to_value_test): Adjust to use the
stratum method instead of the to_stratum field.
* linux-thread-db.c (thread_db_target) <thread_db_target>: Delete.
<stratum>: New override.
(thread_db_target::thread_db_target): Delete.
* make-target-delegates (print_class): Don't print a ctor
declaration. Print a stratum method override declaration.
* process-stratum-target.h (process_stratum_target)
<process_stratum_target>: Delete.
<stratum>: New override.
* ravenscar-thread.c (ravenscar_thread_target)
<ravenscar_thread_target>: Delete.
<stratum>: New override.
* record-btrace.c (record_btrace_target)
<record_btrace_target>: Delete.
<stratum>: New override.
* record-full.c (record_full_base_target)
<record_full_base_target>: Delete.
<stratum>: New override.
* record.c (record_disconnect, record_detach)
(record_mourn_inferior, record_kill): Adjust to use the stratum
method instead of the to_stratum field.
* regcache.c (cooked_read_test, cooked_write_test): Likewise.
* sol-thread.c (sol_thread_target)
<sol_thread_target>: Delete.
<stratum>: New override.
* spu-multiarch.c (spu_multiarch_target)
<spu_multiarch_target>: Delete.
<stratum>: New override.
* target-delegates.c: Regenerate.
* target.c (target_stack::push, target_stack::unpush)
(pop_all_targets_above, pop_all_targets_at_and_above)
(info_target_command, target_require_runnable)
(target_stack::find_beneath): Adjust to use the stratum method
instead of the to_stratum field.
(dummy_target::dummy_target): Delete.
(dummy_target::stratum): New.
(debug_target::debug_target): Delete.
(debug_target::stratum): New.
(maintenance_print_target_stack): Adjust to use the stratum method
instead of the to_stratum field.
* target.h (struct target_ops) <stratum>: New method.
<to_stratum>: Delete.
<is_pushed>: Adjust to use the stratum method
instead of the to_stratum field.
|
|
This patch converts the default_child_has_foo functions to
process_stratum_target methods. This simplifies "regular"
non-inf_child process_stratum targets, since they no longer have to
override the target_ops::has_foo methods to call the default_child_foo
functions. A couple targets need to override the new defaults
(corelow and tracefiles), but it still seems like a good tradeoff,
since those are expected to be little different (target doesn't run).
gdb/ChangeLog:
2018-11-30 Pedro Alves <palves@redhat.com>
* corelow.c (core_target) <has_all_memory, has_execution>: New
overrides.
* inf-child.c (inf_child_target::has_all_memory)
(inf_child_target::has_memory, inf_child_target::has_stack)
(inf_child_target::has_registers)
(inf_child_target::has_execution): Delete.
* inf-child.h (inf_child_target) <has_all_memory, has_memory,
has_stack, has_registers, has_execution>: Delete.
* process-stratum-target.c
(process_stratum_target::has_all_memory)
(process_stratum_target::has_memory)
(process_stratum_target::has_stack)
(process_stratum_target::has_registers)
(process_stratum_target::has_execution): New.
* process-stratum-target.h (process_stratum_target)
<has_all_memory, has_memory, has_stack, has_registers,
has_execution>: New method overrides.
* ravenscar-thread.c (ravenscar_thread_target) <has_all_memory,
has_memory, has_stack, has_registers, has_execution>: Delete.
* remote-sim.c (gdbsim_target) <has_stack, has_registers,
has_execution>: Delete.
* remote.c (remote_target) <has_all_memory, has_memory, has_stack,
has_registers, has_execution>: Delete.
* target.c (default_child_has_all_memory)
(default_child_has_memory, default_child_has_stack)
(default_child_has_registers, default_child_has_execution):
Delete.
* target.h (default_child_has_all_memory)
(default_child_has_memory, default_child_has_stack)
(default_child_has_registers, default_child_has_execution):
Delete.
* tracefile.h (tracefile_target) <has_execution>: New override.
|
|
This adds a base class that all process_stratum targets inherit from.
default_thread_address_space/default_thread_architecture only make
sense for process_stratum targets, so they are transformed to
process_stratum_target methods/overrides.
gdb/ChangeLog:
2018-11-30 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add process-stratum-target.c.
* bsd-kvm.c: Include "process-stratum-target.h".
(bsd_kvm_target): Now inherits from process_stratum_target.
(bsd_kvm_target::bsd_kvm_target): Default it.
* corelow.c: Include "process-stratum-target.h".
(core_target): Now inherits from process_stratum_target.
(core_target::core_target): Don't set to_stratum here.
* inf-child.c (inf_child_target::inf_child_target): Delete.
* inf-child.h: Include "process-stratum-target.h".
(inf_child_target): Inherit from process_stratum_target.
(inf_child_target) <inf_child_target>: Default it.
<can_async_p, supports_non_stop, supports_disable_randomization>:
Delete overrides.
* process-stratum-target.c: New file.
* process-stratum-target.h: New file.
* remote-sim.c: Include "process-stratum-target.h".
(gdbsim_target): Inherit from process_stratum_target.
<gdbsim_target>: Default it.
* remote.c: Include "process-stratum-target.h".
(remote_target): Inherit from process_stratum_target.
<remote_target>: Default it.
* target.c (default_thread_address_space)
(default_thread_architecture): Delete.
* target.h (target_ops) <thread_architecture>: Now returns NULL by
default.
<thread_address_space>: Ditto.
* test-target.h: Include "process-stratum-target.h" instead of
"target.h".
(test_target_ops): Inherit from process_stratum_target.
<test_target_ops>: Default it.
* tracefile.c (tracefile_target::tracefile_target): Delete.
* tracefile.h: Include "process-stratum-target.h".
(tracefile_target): Inherit from process_stratum_target.
<tracefile_target>: Default it.
* target-delegates.c: Regenerate.
|
|
There's no need to have all target.h users seeing this type.
Also helps with a follow up patch.
gdb/ChangeLog:
2018-11-30 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add test-target.c.
* gdbarch-selftests.c: Include "test-target.h".
* regcache.c: Include "test-target.h".
* target.c (test_target_info, test_target_ops::info): Move to ...
* test-target.c: ... this new file.
* target.h (test_target_ops): Move to ...
* test-target.h: ... this new file.
|
|
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
|
|
I noticed that if you pass the name of an existing file (not a
directory) as the argument to --data-directory, gdb will crash:
$ ./gdb -nx --data-directory ./gdb
../../binutils-gdb/gdb/target.c:590:56: runtime error: member call on null pointer of type 'struct target_ops'
This was later reported as PR gdb/23838.
This happens because warning ends up calling
target_supports_terminal_ours, which calls current_top_target, which
returns nullptr this early.
This fixes the problem by handling this case specially in
target_supports_terminal_ours. I also changed
target_supports_terminal_ours to return bool.
gdb/ChangeLog
2018-11-08 Tom Tromey <tom@tromey.com>
PR gdb/23555:
PR gdb/23838:
* target.h (target_supports_terminal_ours): Return bool.
* target.c (target_supports_terminal_ours): Handle case where
current_top_target returns nullptr. Return bool.
gdb/testsuite/ChangeLog
2018-11-08 Tom Tromey <tom@tromey.com>
PR gdb/23555:
PR gdb/23838:
* gdb.base/warning.exp: New file.
|
|
Fix a typo and add a missing one.
gdb/ChangeLog:
* target.c (str_comma_list_concat_elem): Fix typo in comment.
(target_options_to_string): Add comment.
|
|
Consider the following GDB session:
(gdb) target extended-remote :2347
(gdb) file /path/to/exe
(gdb) set remote exec-file /path/to/exe
(gdb) set detach-on-fork off
(gdb) break breakpt
(gdb) run
# ... hits breakpoint
(gdb) info inferiors
Num Description Executable
* 1 process 17001 /path/to/exe
2 process 17002 /path/to/exe
(gdb) kill
(gdb) info inferiors
Num Description Executable
* 1 <null> /path/to/exe
2 process 17002 /path/to/exe
(gdb) target extended-remote :2348
../../src/gdb/thread.c:660: internal-error: thread_info* any_thread_of_process(int): Assertion `pid != 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Or, from bug PR gdb/18050:
(gdb) start
(gdb) add-inferior -exec /path/to/exe
(gdb) target extended-remote :2347
../../src/gdb/thread.c:660: internal-error: thread_info* any_thread_of_process(int): Assertion `pid != 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
The issue is calling target.c:dispose_inferior with a killed inferior in
the inferior list. This assertion is fixed in this commit.
The new test for this issue only runs on platforms that support
'detach-on-fork', and when using
'--target_board=native-extended-gdbserver'.
gdb/ChangeLog:
PR gdb/18050:
* target.c (dispose_inferior): Don't dispose of inferiors that are
already killed.
gdb/testsuite/ChangeLog:
PR gdb/18050:
* gdb.server/extended-remote-restart.c: New file.
* gdb.server/extended-remote-restart.exp: New file.
|
|
Return an std::string instead of a char *, saving some manual freeing.
I only manually tested with "set debug target 1" and "set debug lin-lwp
1", since this only deals with debug output.
gdb/ChangeLog:
* target.h (target_options_to_string): Return an std::string.
* target.c (str_comma_list_concat_elem): Return void, use
std::string.
(do_option): Likewise.
(target_options_to_string): Return an std::string.
* linux-nat.c (linux_nat_target::wait): Adjust.
* target-debug.h (target_debug_print_options): Adjust.
|
|
This patch holds all the straightforward unused variable deletions.
gdb/ChangeLog
2018-07-22 Tom Tromey <tom@tromey.com>
* guile/scm-value.c (gdbscm_value_call): Remove unused variables.
* guile/scm-math.c (vlscm_unop_gdbthrow, vlscm_binop_gdbthrow)
(vlscm_convert_typed_value_from_scheme): Remove unused variable.
* buildsym-legacy.c (get_macro_table): Remove unused variable.
* stack.c (frame_apply_level_command): Remove unused variable.
* tic6x-tdep.c (tic6x_push_dummy_call): Remove unused variable.
* sparc64-tdep.c (adi_examine_command): Remove unused variable.
* rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Remove
unused variable.
* nios2-tdep.c (nios2_push_dummy_call): Remove unused variable.
* mep-tdep.c (mep_push_dummy_call): Remove unused variable.
* ada-lang.c (ada_lookup_symbol_list_worker): Remove unused
variable.
* amd64-tdep.c (amd64_supply_xsave): Remove unused variable.
* arm-tdep.c (arm_record_data_proc_misc_ld_str): Remove unused
variable.
* breakpoint.c (check_no_tracepoint_commands, update_watchpoint):
Remove unused variable.
* cli/cli-script.c (recurse_read_control_structure): Remove unused
variable.
* common/tdesc.c (print_xml_feature::visit): Remove unused
variable.
* compile/compile-object-load.c (store_regs): Remove unused
variables.
* complaints.c (clear_complaints): Remove unused variable.
* corelow.c (core_target_open): Remove unused variable.
* fbsd-tdep.c (fbsd_core_info_proc_status): Remove unused
variable.
* guile/scm-frame.c (gdbscm_frame_read_var): Remove unused
variable.
* guile/scm-symtab.c (stscm_print_sal_smob): Remove unused
variable.
* guile/scm-type.c (gdbscm_field_baseclass_p): Remove unused
variable.
* guile/scm-utils.c (gdbscm_parse_function_args): Remove unused
variable.
* hppa-tdep.c (hppa_stub_frame_unwind_cache): Remove unused
variable.
* ia64-tdep.c (examine_prologue): Remove unused variable.
* infcall.c (run_inferior_call): Remove unused variable.
* inferior.c (exit_inferior): Remove unused variable.
* infrun.c (infrun_thread_ptid_changed): Remove unused variable.
* linespec.c (decode_line_2): Remove unused variable.
* linux-nat.c (super_close): Remove.
* linux-tdep.c (linux_info_proc): Remove unused variable.
* mi/mi-main.c (mi_execute_command): Remove unused variable.
* microblaze-linux-tdep.c (microblaze_linux_sigtramp_cache):
Remove unused variable.
* parse.c (find_minsym_type_and_address): Remove unused variable.
* printcmd.c (info_symbol_command, printf_floating): Remove unused
variable.
* python/py-breakpoint.c (bppy_set_commands): Remove unused
variable.
* python/py-unwind.c (unwind_infopy_dealloc): Remove unused
variables.
* record-btrace.c (record_btrace_target::store_registers): Remove
unused variable.
(cmd_show_record_btrace_cpu): Remove unused variable.
* riscv-tdep.c (riscv_register_reggroup_p)
(riscv_push_dummy_call, riscv_return_value): Remove unused
variable.
* rust-exp.y (literal): Remove unused variable.
* rust-lang.c (rust_evaluate_subexp) <OP_RUST_ARARAY>: Remove
unused variable.
<STRUCTOP_ANONYMOUS>: Likewise.
* s390-linux-tdep.c (s390_linux_init_abi_31)
(s390_linux_init_abi_64): Remove unused variable.
* ser-ming2.c (ser_windows_read_prim, pipe_select_thread)
(file_select_thread, net_windows_open, _initialize_ser_windows):
Remove unused variables.
* symtab.c (find_pc_sect_line): Remove unused variable.
* target-memory.c (compute_garbled_blocks): Remove unused
variable.
(target_write_memory_blocks): Remove unused variable.
* target.c (target_stack::unpush): Remove unused variables.
* tracepoint.c (start_tracing, all_tracepoint_actions)
(merge_uploaded_trace_state_variables)
(print_one_static_tracepoint_marker): Remove unused variable.
* unittests/basic_string_view/element_access/char/1.cc (test01):
Remove unused variable.
* windows-nat.c (windows_continue, windows_add_all_dlls)
(do_initial_windows_stuff, windows_nat_target::create_inferior):
Remove unused variables.
|
|
Remove ptid_equal in favor of using "==".
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_equal): Remove.
* common/ptid.h (ptid_equal): Don't declare.
* ada-tasks.c: Update.
* breakpoint.c: Update.
* common/agent.c: Update.
* corelow.c: Update.
* darwin-nat-info.c: Update.
* darwin-nat.c: Update.
* dcache.c: Update.
* dtrace-probe.c: Update.
* dummy-frame.c: Update.
* fbsd-nat.c: Update.
* frame.c: Update.
* gdbthread.h: Update.
* gnu-nat.c: Update.
* go32-nat.c: Update.
* inf-loop.c: Update.
* inf-ptrace.c: Update.
* infcall.c: Update.
* infcmd.c: Update.
* inflow.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-thread-db.c: Update.
* mi/mi-cmd-var.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* nto-procfs.c: Update.
* ppc-linux-tdep.c: Update.
* procfs.c: Update.
* python/py-inferior.c: Update.
* python/py-record-btrace.c: Update.
* python/py-record.c: Update.
* ravenscar-thread.c: Update.
* regcache.c: Update.
* remote-sim.c: Update.
* remote.c: Update.
* sol-thread.c: Update.
* solib.c: Update.
* target.c: Update.
* tui/tui-stack.c: Update.
* varobj.c: Update.
* windows-nat.c: Update.
* windows-tdep.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* lynx-low.c: Update.
* mem-break.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* server.c: Update.
* spu-low.c: Update.
* target.c: Update.
* win32-low.c: Update.
|
|
This removes ptid_get_pid in favor of calling the ptid_t::pid method.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_get_pid): Remove.
* common/ptid.h (ptid_get_pid): Don't declare.
* aarch64-linux-nat.c: Update.
* ada-lang.c: Update.
* aix-thread.c: Update.
* alpha-bsd-nat.c: Update.
* amd64-fbsd-nat.c: Update.
* amd64-linux-nat.c: Update.
* arm-linux-nat.c: Update.
* arm-nbsd-nat.c: Update.
* auxv.c: Update.
* break-catch-syscall.c: Update.
* breakpoint.c: Update.
* bsd-uthread.c: Update.
* corelow.c: Update.
* ctf.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* fbsd-tdep.c: Update.
* gcore.c: Update.
* gnu-nat.c: Update.
* hppa-nbsd-nat.c: Update.
* hppa-obsd-nat.c: Update.
* i386-fbsd-nat.c: Update.
* ia64-linux-nat.c: Update.
* inf-ptrace.c: Update.
* infcmd.c: Update.
* inferior.c: Update.
* inferior.h: Update.
* inflow.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* m68k-bsd-nat.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* mips-linux-nat.c: Update.
* mips-nbsd-nat.c: Update.
* mips64-obsd-nat.c: Update.
* nat/aarch64-linux-hw-point.c: Update.
* nat/aarch64-linux.c: Update.
* nat/linux-btrace.c: Update.
* nat/linux-osdata.c: Update.
* nat/linux-procfs.c: Update.
* nat/x86-linux-dregs.c: Update.
* nto-procfs.c: Update.
* obsd-nat.c: Update.
* ppc-linux-nat.c: Update.
* ppc-nbsd-nat.c: Update.
* ppc-obsd-nat.c: Update.
* proc-service.c: Update.
* procfs.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* ravenscar-thread.c: Update.
* record.c: Update.
* remote-sim.c: Update.
* remote.c: Update.
* rs6000-nat.c: Update.
* s390-linux-nat.c: Update.
* sh-nbsd-nat.c: Update.
* sol-thread.c: Update.
* sparc-nat.c: Update.
* sparc64-tdep.c: Update.
* spu-linux-nat.c: Update.
* spu-tdep.c: Update.
* target-debug.h: Update.
* target.c: Update.
* thread.c: Update.
* tid-parse.c: Update.
* tracefile-tfile.c: Update.
* vax-bsd-nat.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* x86-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* linux-mips-low.c: Update.
* lynx-low.c: Update.
* mem-break.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* server.c: Update.
* spu-low.c: Update.
* target.c: Update.
* tracepoint.c: Update.
|
|
This removes pid_to_ptid in favor of calling the ptid_t constructor
directly.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (pid_to_ptid): Remove.
* common/ptid.h (pid_to_ptid): Don't declare.
* aix-thread.c: Update.
* arm-linux-nat.c: Update.
* common/ptid.c: Update.
* common/ptid.h: Update.
* corelow.c: Update.
* ctf.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* fork-child.c: Update.
* gnu-nat.c: Update.
* go32-nat.c: Update.
* inf-ptrace.c: Update.
* infcmd.c: Update.
* inferior.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* nat/aarch64-linux-hw-point.c: Update.
* nat/fork-inferior.c: Update.
* nat/x86-linux-dregs.c: Update.
* nto-procfs.c: Update.
* obsd-nat.c: Update.
* procfs.c: Update.
* progspace.c: Update.
* remote.c: Update.
* rs6000-nat.c: Update.
* s390-linux-nat.c: Update.
* sol-thread.c: Update.
* spu-linux-nat.c: Update.
* target.c: Update.
* top.c: Update.
* tracefile-tfile.c: Update.
* windows-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* linux-ppc-low.c: Update.
* linux-x86-low.c: Update.
* proc-service.c: Update.
* server.c: Update.
* spu-low.c: Update.
* thread-db.c: Update.
* win32-low.c: Update.
|
|
This removes ptid_build in favor of simply calling the ptid_t
constructor directly.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.h (ptid_build): Don't declare.
* common/ptid.c (ptid_build): Remove.
* aix-thread.c: Update.
* bsd-kvm.c: Update.
* bsd-uthread.c: Update.
* common/agent.c: Update.
* common/ptid.c: Update.
* common/ptid.h: Update.
* corelow.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* gnu-nat.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-thread-db.c: Update.
* nat/linux-osdata.c: Update.
* nat/linux-procfs.c: Update.
* nto-procfs.c: Update.
* obsd-nat.c: Update.
* proc-service.c: Update.
* procfs.c: Update.
* ravenscar-thread.c: Update.
* remote-sim.c: Update.
* remote.c: Update.
* sol-thread.c: Update.
* target.c: Update.
* windows-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* lynx-low.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* spu-low.c: Update.
* thread-db.c: Update.
* win32-low.c: Update.
|
|
In my multi-target work, I need to add a few more
scoped_restore_current_thread and switch_to_thread calls in some
places, and in some lower-level places I was fighting against the fact
that switch_to_thread reads/refreshes the stop_pc global.
Instead of piling on workarounds, let's just finally eliminate the
stop_pc global. We already have the per-thread
thread_info->suspend.stop_pc field, so it's mainly a matter of using
that more/instead.
gdb/ChangeLog:
2018-06-28 Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_suspend_state) <stop_pc>: Extend
comments.
(switch_to_thread_no_regs): Adjust comment.
* infcmd.c (stop_pc): Delete.
(post_create_inferior, info_program_command): Replace references
to stop_pc with references to thread_info->suspend.stop_pc.
* inferior.h (stop_pc): Delete declaration.
* infrun.c (proceed, handle_syscall_event, fill_in_stop_func)
(handle_inferior_event_1, handle_signal_stop)
(process_event_stop_test, keep_going_stepped_thread)
(handle_step_into_function, handle_step_into_function_backward)
(print_stop_location): Replace references to stop_pc with
references to thread_info->suspend.stop_pc.
(struct infcall_suspend_state) <stop_pc>: Delete field.
(save_infcall_suspend_state, restore_infcall_suspend_state):
Remove references to inf_stat->stop_pc.
* linux-fork.c (fork_load_infrun_state): Likewise.
* record-btrace.c (record_btrace_set_replay): Likewise.
* record-full.c (record_full_goto_entry): Likewise.
* remote.c (print_one_stopped_thread): Likewise.
* target.c (target_resume): Extend comment.
* thread.c (set_executing_thread): New.
(set_executing): Use it.
(switch_to_thread_no_regs, switch_to_no_thread, switch_to_thread):
Remove references to stop_pc.
|
|
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
|
|
Currently, the target stack is represented by a singly linked list,
with target_ops having a pointer to the target beneath. This poses a
problem for multi-process / multi-target debugging. In that case, we
will naturally want multiple instances of target stacks. E.g., one
stack for inferior 1 which is debugging a core file, and another
target stack for inferior 2 which is debugging a remote process. The
problem then is in finding a target's "beneath" target, if we consider
that for some target_ops types, we'll be sharing a single target_ops
instance between several inferiors. For example, so far, I found no
need to have multiple instances of the spu_multiarch_target /
exec_target / dummy_target targets.
Thus this patch, which changes the target stack representation to an
array of pointers. For now, there's still a single global instance of
this new target_stack class, though further down in the multi-target
work, each inferior will have its own instance.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (target_ops) <beneath>: Now a method. All references
updated.
(class target_stack): New.
* target.c (g_target_stack): New.
(g_current_top_target): Delete.
(current_top_target): Get the top target out of g_target_stack.
(target_stack::push, target_stack::unpush): New.
(push_target, unpush_target): Reimplement.
(target_is_pushed): Reimplement in terms of g_target_stack.
(target_ops::beneath, target_stack::find_beneath): New.
|
|
Call target_ops::beneath() throughout instead.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (find_target_beneath): Delete declaration.
* target.c (find_target_beneath): Delete definition.
* aix-thread.c: All callers of find_target_beneath adjusted to
call target_ops::beneath instead.
* bsd-uthread.c: Likewise.
* linux-thread-db.c: Likewise.
* ravenscar-thread.c: Likewise.
* sol-thread.c: Likewise.
* spu-multiarch.c: Likewise.
|
|
This changes target_ops::beneath from a pointer to a method, and
adjusts all references throughout. The idea here is to make it easier
to change the target stack representation from an intrusive singly
linked list to something else without leaking implementation details
throughout.
The commit does not change the representation yet, that will be done
in a following patch. That is why a new target_ops::m_beneath field
appears here. That new field isn't really documented properly or made
private, simply because it will be removed shortly.
Note that target_ops::beneath() is essentially the same as the current
find_target_beneath routine. The following patch will eliminate the
latter.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (target_ops) <beneath>: Now a method. All references
updated.
(target_ops) <m_beneath>: New.
* target.c (target_ops::beneath): New.
* corelow.c: Adjust all references to target_ops::beneath.
* linux-thread-db.c: Likewise.
* make-target-delegates: Likewise.
* record-btrace.c: Likewise.
* record-full.c: Likewise.
* remote.c: Likewise.
* target.c: Likewise.
* target-delegates.c: Regenerate.
|
|
The recent C++ification of target_ops replaced references to the old
"current_target" squashed target throughout with references to a
"target_stack" pointer. I had picked the "target_stack" name very
early in the multi-target work, and managed to stick with it, even
though it's a bit of a misnomer, since it isn't really a "target
stack" object, but a pointer into the current top target in the stack.
As I'm splitting more pieces off of the multi-target branch, I've come
to think that it's better to rename it now. A following patch will
introduce a new class to represent a target stack, and "target_stack"
would be _its_ ideal name. (In the branch, the class is called
a_target_stack to work around the clash.)
Thus this commit renames target_stack to current_top_target and
replaces all references throughout. Also, while at it,
current_top_target is made a function instead of a pointer, to make it
possible to change its internal implementation without leaking
implementation details out. In a couple patches, the implementation
of the function will change to refer to a target stack object, and
then further down the multi-target work, it'll change again to find
the right target stack for the current inferior.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (target_stack): Delete.
(current_top_target): Declare function.
* target.c (target_stack): Delete.
(g_current_top_target): New.
(current_top_target): New function.
* auxv.c: Use current_top_target instead of target_stack
throughout.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* corefile.c: Likewise.
* elfread.c: Likewise.
* eval.c: Likewise.
* exceptions.c: Likewise.
* frame.c: Likewise.
* gdbarch-selftests.c: Likewise.
* gnu-v3-abi.c: Likewise.
* ia64-tdep.c: Likewise.
* ia64-vms-tdep.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* linespec.c: Likewise.
* linux-tdep.c: Likewise.
* minsyms.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-linux-tdep.c: Likewise.
* procfs.c: Likewise.
* regcache.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-tdep.c: Likewise.
* solib-aix.c: Likewise.
* solib-darwin.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* solib-target.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* spu-tdep.c: Likewise.
* symfile.c: Likewise.
* symtab.c: Likewise.
* target-descriptions.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* target.h: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* windows-tdep.c: Likewise.
* mi/mi-main.c: Likewise.
|
|
Currently, to open a target, with "target TARGET_NAME", GDB finds the
target_ops instance with "TARGET_NAME" as short name, and then calls
its target_ops::open virtual method. In reality, there's no actual
target/name lookup, a pointer to the target_ops object was associated
with the "target TARGET_NAME" command at add_target time (when GDB is
initialized), as the command's context.
This creates a chicken and egg situation. Consider the case of
wanting to open multiple remote connections. We want to be able to
have one remote target_ops instance per connection, but, if we're not
connected yet, so we don't yet have an instance to call target->open()
on...
This patch fixes this by separating out common info about a target_ops
to a separate structure (shortname, longname, doc), and changing the
add_target routine to take a reference to such an object instead of a
pointer to a target_ops, and a pointer to a factory function that is
responsible to open an instance of the corresponding target when the
user types "target TARGET_NAME".
-extern void add_target (struct target_ops *);
+extern void add_target (const target_info &info, target_open_ftype *func);
I.e. this factory function replaces the target_ops::open virtual
method.
For static/singleton targets, nothing changes, the target_open_ftype
function pushes the global target_ops instance on the target stack.
At target_close time, the connection is tor down, but the global
target_ops object remains live.
However, targets that support being open multiple times will make
their target_open_ftype routine allocate a new target_ops instance on
the heap [e.g., new remote_target()], and push that on the stack. At
target_close time, the new object is destroyed (by the
target_ops::close virtual method).
Both the core target and the remote targets will support being open
multiple times (others could/should too, but those were my stopping
point), but not in this patch yet. We need to get rid of more globals
first before that'd be useful.
Native targets are somewhat special, given find_default_run_target &
friends. Those routines also expect to return a target_ops pointer,
even before we've open the target. However, we'll never need more
than one instance of the native target, so we can assume/require that
native targets are global/simpletons, and have the backends register a
pointer to the native target_ops. Since all native targets inherit
inf_child_target, we can centralize that registration. See
add_inf_child_target, get_native_target/set_native_target and
find_default_run_target.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Use
add_inf_child_target.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Use
add_inf_child_target.
* aix-thread.c (aix_thread_target_info): New.
(aix_thread_target) <shortname, longname, doc>: Delete.
<info>: New.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Use
add_inf_child_target.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Use
add_inf_child_target.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Use
add_inf_child_target.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Use
add_inf_child_target.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Use
add_inf_child_target.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Use
add_inf_child_target.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Use
add_inf_child_target.
* arm-linux-nat.c (_initialize_arm_linux_nat): Use
add_inf_child_target.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Use
add_inf_child_target.
* bfd-target.c (target_bfd_target_info): New.
(target_bfd) <shortname, longname, doc>: Delete.
<info>: New.
* bsd-kvm.c (bsd_kvm_target_info): New.
(bsd_kvm_target) <shortname, longname, doc>: Delete.
<info>: New.
(bsd_kvm_target::open): Rename to ...
(bsd_kvm_target_open): ... this. Adjust.
* bsd-uthread.c (bsd_uthread_target_info): New.
(bsd_uthread_target) <shortname, longname, doc>: Delete.
<info>: New.
* corefile.c (core_file_command): Adjust.
* corelow.c (core_target_info): New.
(core_target) <shortname, longname, doc>: Delete.
<info>: New.
(core_target::open): Rename to ...
(core_target_open): ... this. Adjust.
* ctf.c (ctf_target_info): New.
(ctf_target) <shortname, longname, doc>: Delete.
<info>: New.
(ctf_target::open): Rename to ...
(ctf_target_open): ... this.
(_initialize_ctf): Adjust.
* exec.c (exec_target_info): New.
(exec_target) <shortname, longname, doc>: Delete.
<info>: New.
(exec_target::open): Rename to ...
(exec_target_open): ... this.
* gdbcore.h (core_target_open): Declare.
* go32-nat.c (_initialize_go32_nat): Use add_inf_child_target.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Use
add_inf_child_target.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Use
add_inf_child_target.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Use
add_inf_child_target.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Use
add_inf_child_target.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Use
add_inf_child_target.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Use
add_inf_child_target.
* i386-linux-nat.c (_initialize_i386_linux_nat): Use
add_inf_child_target.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Use
add_inf_child_target.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Use
add_inf_child_target.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Use
add_inf_child_target.
* inf-child.c (inf_child_target_info): New.
(inf_child_target::info): New.
(inf_child_open_target): Remove 'target' parameter. Use
get_native_target instead.
(inf_child_target::open): Delete.
(add_inf_child_target): New.
* inf-child.h (inf_child_target) <shortname, longname, doc, open>:
Delete.
<info>: New.
(add_inf_child_target): Declare.
(inf_child_open_target): Declare.
* linux-thread-db.c (thread_db_target_info): New.
(thread_db_target) <shortname, longname, doc>: Delete.
<info>: New.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Use
add_inf_child_target.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Use
add_inf_child_target.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Use
add_inf_child_target.
* m88k-bsd-nat.c (_initialize_m88kbsd_nat): Use
add_inf_child_target.
* make-target-delegates (print_class): Adjust.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Use
add_inf_child_target.
* mips-linux-nat.c (_initialize_mips_linux_nat): Use
add_inf_child_target.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Use
add_inf_child_target.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Use
add_inf_child_target.
* nto-procfs.c (nto_native_target_info): New.
(nto_procfs_target_native) <shortname, longname, doc>:
Delete.
<info>: New.
(nto_procfs_target_info): New.
(nto_procfs_target_procfs) <shortname, longname, doc>:
Delete.
<info>: New.
(init_procfs_targets): Adjust.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Use
add_inf_child_target.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Use
add_inf_child_target.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Use
add_inf_child_target.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Use
add_inf_child_target.
* ravenscar-thread.c (ravenscar_target_info): New.
(ravenscar_thread_target) <shortname, longname, doc>:
Delete.
<info>: New.
* record-btrace.c (record_btrace_target_info):
(record_btrace_target) <shortname, longname, doc>: Delete.
<info>: New.
(record_btrace_target::open): Rename to ...
(record_btrace_target_open): ... this. Adjust.
* record-full.c (record_longname, record_doc): New.
(record_full_base_target) <shortname, longname, doc>: Delete.
<info>: New.
(record_full_target_info): New.
(record_full_target): <shortname>: Delete.
<info>: New.
(record_full_core_open_1, record_full_open_1): Update comments.
(record_full_base_target::open): Rename to ...
(record_full_open): ... this.
(cmd_record_full_restore): Update.
(_initialize_record_full): Update.
* remote-sim.c (remote_sim_target_info): New.
(gdbsim_target) <shortname, longname, doc>: Delete.
<info>: New.
(gdbsim_target::open): Rename to ...
(gdbsim_target_open): ... this.
(_initialize_remote_sim): Adjust.
* remote.c (remote_doc): New.
(remote_target_info): New.
(remote_target) <shortname, longname, doc>: Delete.
<info>: New.
(extended_remote_target_info): New.
(extended_remote_target) <shortname, longname, doc>: Delete.
<info>: New.
(remote_target::open_1): Make static. Adjust.
* rs6000-nat.c (_initialize_rs6000_nat): Use add_inf_child_target.
* s390-linux-nat.c (_initialize_s390_nat): Use
add_inf_child_target.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Use
add_inf_child_target.
* sol-thread.c (thread_db_target_info): New.
(sol_thread_target) <shortname, longname, doc>: Delete.
<info>: New.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Use
add_inf_child_target.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Use
add_inf_child_target.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Use
add_inf_child_target.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Use
add_inf_child_target.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Use
add_inf_child_target.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Use
add_inf_child_target.
* spu-linux-nat.c (_initialize_spu_nat): Use
add_inf_child_target.
* spu-multiarch.c (spu_multiarch_target_info): New.
(spu_multiarch_target) <shortname, longname, doc>: Delete.
<info>: New.
* target-delegates.c: Regenerate.
* target.c: Include <unordered_map>.
(target_ops_p): Delete.
(DEF_VEC_P(target_ops_p)): Delete.
(target_factories): New.
(test_target_info): New.
(test_target_ops::info): New.
(open_target): Adjust to use target_factories.
(add_target_with_completer): Rename to ...
(add_target): ... this. Change prototype. Register target_info
and open callback in target_factories. Register target_info in
command context instead of target_ops.
(add_target): Delete old implementation.
(add_deprecated_target_alias): Change prototype. Adjust.
(the_native_target): New.
(set_native_target, get_native_target): New.
(find_default_run_target): Use the_native_target.
(find_attach_target, find_run_target): Simplify.
(target_ops::open): Delete.
(dummy_target_info): New.
(dummy_target::shortname, dummy_target::longname)
(dummy_target::doc): Delete.
(dummy_target::info): New.
(debug_target::shortname, debug_target::longname)
(debug_target::doc): Delete.
(debug_target::info): New.
* target.h (struct target_info): New.
(target_ops::~target_ops): Add comment.
(target_ops::info): New.
(target_ops::shortname, target_ops::longname, target_ops::doc): No
longer virtual. Implement in terms of target_info.
(set_native_target, get_native_target): Declare.
(target_open_ftype): New.
(add_target, add_target_with_completer)
(add_deprecated_target_alias): Change prototype.
(test_target) <shortname, longname, doc>: Delete.
<info>: New.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Use
add_inf_child_target.
* tracefile-tfile.c (tfile_target_info): New.
(tfile_target) <shortname, longname, doc>: Delete.
<info>: New.
(tfile_target::open): Rename to ...
(tfile_target_open): ... this.
(_initialize_tracefile_tfile): Adjust.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Use
add_inf_child_target.
* windows-nat.c (_initialize_windows_nat): Use
add_inf_child_target.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Use
add_inf_child_target.
|
|
After the previous target_ops/C++ patches are all squashed and merged,
this one can go in separately.
This patch adjusts all the target methods to return bool instead of int
when they're returning a boolean.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* target.h (target_ops)
<stopped_by_sw_breakpoint, supports_stopped_by_sw_breakpoint,
stopped_by_hw_breakpoint, supports_stopped_by_hw_breakpoint,
stopped_by_watchpoint, have_continuable_watchpoint,
stopped_data_address, watchpoint_addr_within_range,
can_accel_watchpoint_condition, can_run, thread_alive,
has_all_memory, has_memory, has_stack, has_registers,
has_execution, can_async_p, is_async_p, supports_non_stop,
always_non_stop_p, can_execute_reverse, supports_multi_process,
supports_enable_disable_tracepoint,
supports_disable_randomization, supports_string_tracing,
supports_evaluation_of_breakpoint_conditions,
can_run_breakpoint_commands, filesystem_is_local,
can_download_tracepoint, get_trace_state_variable_value,
set_trace_notes, get_tib_address, use_agent, can_use_agent,
record_is_replaying, record_will_replay,
augmented_libraries_svr4_read>: Adjust to return bool.
* aarch64-linux-nat.c: All implementations adjusted.
* aix-thread.c: All implementations adjusted.
* arm-linux-nat.c: All implementations adjusted.
* breakpoint.c: All implementations adjusted.
* bsd-kvm.c: All implementations adjusted.
* bsd-uthread.c: All implementations adjusted.
* corelow.c: All implementations adjusted.
* ctf.c: All implementations adjusted.
* darwin-nat.c: All implementations adjusted.
* darwin-nat.h: All implementations adjusted.
* exec.c: All implementations adjusted.
* fbsd-nat.c: All implementations adjusted.
* fbsd-nat.h: All implementations adjusted.
* gnu-nat.c: All implementations adjusted.
* gnu-nat.h: All implementations adjusted.
* go32-nat.c: All implementations adjusted.
* ia64-linux-nat.c: All implementations adjusted.
* inf-child.c: All implementations adjusted.
* inf-child.h: All implementations adjusted.
* inf-ptrace.c: All implementations adjusted.
* inf-ptrace.h: All implementations adjusted.
* linux-nat.c: All implementations adjusted.
* linux-nat.h: All implementations adjusted.
* mips-linux-nat.c: All implementations adjusted.
* nto-procfs.c: All implementations adjusted.
* ppc-linux-nat.c: All implementations adjusted.
* procfs.c: All implementations adjusted.
* ravenscar-thread.c: All implementations adjusted.
* record-btrace.c: All implementations adjusted.
* record-full.c: All implementations adjusted.
* remote-sim.c: All implementations adjusted.
* remote.c: All implementations adjusted.
* s390-linux-nat.c: All implementations adjusted.
* sol-thread.c: All implementations adjusted.
* spu-multiarch.c: All implementations adjusted.
* target-delegates.c: All implementations adjusted.
* target.c: All implementations adjusted.
* target.h: All implementations adjusted.
* tracefile-tfile.c: All implementations adjusted.
* tracefile.c: All implementations adjusted.
* tracefile.h: All implementations adjusted.
* windows-nat.c: All implementations adjusted.
* x86-linux-nat.h: All implementations adjusted.
* x86-nat.h: All implementations adjusted.
|
|
I.e., use C++ virtual methods and inheritance instead of tables of
function pointers.
Unfortunately, there's no way to do a smooth transition. ALL native
targets in the tree must be converted at the same time. I've tested
all I could with cross compilers and with help from GCC compile farm,
but naturally I haven't been able to test many of the ports. Still, I
made a best effort to port everything over, and while I expect some
build problems due to typos and such, which should be trivial to fix,
I don't expect any design problems.
* Implementation notes:
- The flattened current_target is gone. References to current_target
or current_target.beneath are replaced with references to
target_stack (the top of the stack) directly.
- To keep "set debug target" working, this adds a new debug_stratum
layer that sits on top of the stack, prints the debug, and delegates
to the target beneath.
In addition, this makes the shortname and longname properties of
target_ops be virtual methods instead of data fields, and makes the
debug target defer those to the target beneath. This is so that
debug code sprinkled around that does "if (debugtarget) ..." can
transparently print the name of the target beneath.
A patch later in the series actually splits out the
shortname/longname methods to a separate structure, but I preferred
to keep that chance separate as it is associated with changing a bit
the design of how targets are registered and open.
- Since you can't check whether a C++ virtual method is overridden,
the old method of checking whether a target_ops implements a method
by comparing the function pointer must be replaced with something
else.
Some cases are fixed by adding a parallel "can_do_foo" target_ops
methods. E.g.,:
+ for (t = target_stack; t != NULL; t = t->beneath)
{
- if (t->to_create_inferior != NULL)
+ if (t->can_create_inferior ())
break;
}
Others are fixed by changing void return type to bool or int return
type, and have the default implementation return false or -1, to
indicate lack of support.
- make-target-delegates was adjusted to generate C++ classes and
methods.
It needed tweaks to grok "virtual" in front of the target method
name, and for the fact that methods are no longer function pointers.
(In particular, the current code parsing the return type was simple
because it could simply parse up until the '(' in '(*to_foo)'.
It now generates a couple C++ classes that inherit target_ops:
dummy_target and debug_target.
Since we need to generate the class declarations as well, i.e., we
need to emit methods twice, we now generate the code in two passes.
- The core_target global is renamed to avoid conflict with the
"core_target" class.
- ctf/tfile targets
init_tracefile_ops is replaced by a base class that is inherited by
both ctf and tfile.
- bsd-uthread
The bsd_uthread_ops_hack hack is gone. It's not needed because
nothing was extending a target created by bsd_uthread_target.
- remote/extended-remote targets
This is a first pass, just enough to C++ify target_ops.
A later pass will convert more free functions to methods, and make
remote_state be truly per remote instance, allowing multiple
simultaneous instances of remote targets.
- inf-child/"native" is converted to an actual base class
(inf_child_target), that is inherited by all native targets.
- GNU/Linux
The old weird double-target linux_ops mechanism in linux-nat.c, is
gone, replaced by adding a few virtual methods to linux-nat.h's
target_ops, called low_XXX, that the concrete linux-nat
implementations override. Sort of like gdbserver's
linux_target_ops, but simpler, for requiring only one
target_ops-like hierarchy, which spares implementing the same method
twice when we need to forward the method to a low implementation.
The low target simply reimplements the target_ops method directly in
that case.
There are a few remaining linux-nat.c hooks that would be better
converted to low_ methods like above too. E.g.:
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
linux_nat_set_forget_process
That'll be done in a follow up patch.
- We can no longer use functions like x86_use_watchpoints to install
custom methods on an arbitrary base target.
The patch replaces instances of such a pattern with template mixins.
For example memory_breakpoint_target defined in target.h, or
x86_nat_target in x86-nat.h.
- linux_trad_target, MIPS and Alpha GNU/Linux
The code in the new linux-nat-trad.h/c files which was split off of
inf-ptrace.h/c recently, is converted to a C++ base class, and used
by the MIPS and Alpha GNU/Linux ports.
- BSD targets
The
$architecture x NetBSD/OpenBSD/FreeBSD
support matrix complicates things a bit. There's common BSD target
code, and there's common architecture-specific code shared between
the different BSDs. Currently, all that is stiched together to form
a final target, via the i386bsd_target, x86bsd_target,
fbsd_nat_add_target functions etc.
This introduces new fbsd_nat_target, obsd_nat_target and
nbsd_nat_target classes that serve as base/prototype target for the
corresponding BSD variant.
And introduces generic i386/AMD64 BSD targets, to be used as
template mixin to build a final target. Similarly, a generic SPARC
target is added, used by both BSD and Linux ports.
- bsd_kvm_add_target, BSD libkvm target
I considered making bsd_kvm_supply_pcb a virtual method, and then
have each port inherit bsd_kvm_target and override that method, but
that was resulting in lots of unjustified churn, so I left the
function pointer mechanism alone.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@freebsd.org>
* target.h (enum strata) <debug_stratum>: New.
(struct target_ops) <all delegation methods>: Replace by C++
virtual methods, and drop "to_" prefix. All references updated
throughout.
<to_shortname, to_longname, to_doc, to_data,
to_have_steppable_watchpoint, to_have_continuable_watchpoint,
to_has_thread_control, to_attach_no_wait>: Delete, replaced by
virtual methods. All references updated throughout.
<can_attach, supports_terminal_ours, can_create_inferior,
get_thread_control_capabilities, attach_no_wait>: New
virtual methods.
<insert_breakpoint, remove_breakpoint>: Now
TARGET_DEFAULT_NORETURN methods.
<info_proc>: Now returns bool.
<to_magic>: Delete.
(OPS_MAGIC): Delete.
(current_target): Delete. All references replaced by references
to ...
(target_stack): ... this. New.
(target_shortname, target_longname): Adjust.
(target_can_run): Now a function declaration.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(memory_breakpoint_target): New template class.
(test_target_ops): Refactor as a C++ class with virtual methods.
* make-target-delegates (NAME_PART): Tighten.
(POINTER_PART, CP_SYMBOL): New.
(SIMPLE_RETURN_PART): Reimplement.
(VEC_RETURN_PART): Expect less.
(RETURN_PART, VIRTUAL_PART): New.
(METHOD): Adjust to C++ virtual methods.
(scan_target_h): Remove reference to C99.
(dname): Output "target_ops::" prefix.
(write_function_header): Adjust to output a C++ class method.
(write_declaration): New.
(write_delegator): Adjust to output a C++ class method.
(tdname): Output "dummy_target::" prefix.
(write_tdefault, write_debugmethod): Adjust to output a C++ class
method.
(tdefault_names, debug_names): Delete.
(return_types, tdefaults, styles, argtypes_array): New.
(top level): All methods are delegators.
(print_class): New.
(top level): Print dummy_target and debug_target classes.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_info_proc_what)
(target_debug_print_thread_control_capabilities)
(target_debug_print_thread_info_p): New.
* target.c (dummy_target): Delete.
(the_dummy_target, the_debug_target): New.
(target_stack): Now extern.
(set_targetdebug): Push/unpush debug target.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(add_target_with_completer): No longer call
complete_target_initialization.
(target_supports_terminal_ours): Use regular delegation.
(update_current_target): Delete.
(push_target): No longer check magic number. Don't call
update_current_target.
(unpush_target): Don't call update_current_target.
(target_is_pushed): No longer check magic number.
(target_require_runnable): Skip for all stratums over
process_stratum.
(target_ops::info_proc): New.
(target_info_proc): Use find_target_at and
find_default_run_target.
(target_supports_disable_randomization): Use regular delegation.
(target_get_osdata): Use find_target_at.
(target_ops::open, target_ops::close, target_ops::can_attach)
(target_ops::attach, target_ops::can_create_inferior)
(target_ops::create_inferior, target_ops::can_run)
(target_can_run): New.
(default_fileio_target): Use regular delegation.
(target_ops::fileio_open, target_ops::fileio_pwrite)
(target_ops::fileio_pread, target_ops::fileio_fstat)
(target_ops::fileio_close, target_ops::fileio_unlink)
(target_ops::fileio_readlink): New.
(target_fileio_open_1, target_fileio_unlink)
(target_fileio_readlink): Always call the target method. Handle
FILEIO_ENOSYS.
(return_zero, return_zero_has_execution): Delete.
(init_dummy_target): Delete.
(dummy_target::dummy_target, dummy_target::shortname)
(dummy_target::longname, dummy_target::doc)
(debug_target::debug_target, debug_target::shortname)
(debug_target::longname, debug_target::doc): New.
(target_supports_delete_record): Use regular delegation.
(setup_target_debug): Delete.
(maintenance_print_target_stack): Skip debug_stratum.
(initialize_targets): Instantiate the_dummy_target and
the_debug_target.
* auxv.c (target_auxv_parse): Remove 'ops' parameter. Adjust to
use target_stack.
(target_auxv_search, fprint_target_auxv): Adjust.
(info_auxv_command): Adjust to use target_stack.
* auxv.h (target_auxv_parse): Remove 'ops' parameter.
* exceptions.c (print_flush): Handle a NULL target_stack.
* regcache.c (target_ops_no_register): Refactor as class with
virtual methods.
* exec.c (exec_target): New class.
(exec_ops): Now an exec_target.
(exec_open, exec_close_1, exec_get_section_table)
(exec_xfer_partial, exec_files_info, exec_has_memory)
(exec_make_note_section): Refactor as exec_target methods.
(exec_file_clear, ignore, exec_remove_breakpoint, init_exec_ops):
Delete.
(exec_target::find_memory_regions): New.
(_initialize_exec): Don't call init_exec_ops.
* gdbcore.h (exec_file_clear): Delete.
* corefile.c (core_target): Delete.
(core_file_command): Adjust.
* corelow.c (core_target): New class.
(the_core_target): New.
(core_close): Remove target_ops parameter.
(core_close_cleanup): Adjust.
(core_target::close): New.
(core_open, core_detach, get_core_registers, core_files_info)
(core_xfer_partial, core_thread_alive, core_read_description)
(core_pid_to_str, core_thread_name, core_has_memory)
(core_has_stack, core_has_registers, core_info_proc): Rework as
core_target methods.
(ignore, core_remove_breakpoint, init_core_ops): Delete.
(_initialize_corelow): Initialize the_core_target.
* gdbcore.h (core_target): Delete.
(the_core_target): New.
* ctf.c: (ctf_target): New class.
(ctf_ops): Now a ctf_target.
(ctf_open, ctf_close, ctf_files_info, ctf_fetch_registers)
(ctf_xfer_partial, ctf_get_trace_state_variable_value)
(ctf_trace_find, ctf_traceframe_info): Refactor as ctf_target
methods.
(init_ctf_ops): Delete.
(_initialize_ctf): Don't call it.
* tracefile-tfile.c (tfile_target): New class.
(tfile_ops): Now a tfile_target.
(tfile_open, tfile_close, tfile_files_info)
(tfile_get_tracepoint_status, tfile_trace_find)
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value, tfile_traceframe_info):
Refactor as tfile_target methods.
(tfile_xfer_partial_features): Remove target_ops parameter.
(init_tfile_ops): Delete.
(_initialize_tracefile_tfile): Don't call it.
* tracefile.c (tracefile_has_all_memory, tracefile_has_memory)
(tracefile_has_stack, tracefile_has_registers)
(tracefile_thread_alive, tracefile_get_trace_status): Refactor as
tracefile_target methods.
(init_tracefile_ops): Delete.
(tracefile_target::tracefile_target): New.
* tracefile.h: Include "target.h".
(tracefile_target): New class.
(init_tracefile_ops): Delete.
* spu-multiarch.c (spu_multiarch_target): New class.
(spu_ops): Now a spu_multiarch_target.
(spu_thread_architecture, spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Refactor as
spu_multiarch_target methods.
(init_spu_ops): Delete.
(_initialize_spu_multiarch): Remove references to init_spu_ops,
complete_target_initialization.
* ravenscar-thread.c (ravenscar_thread_target): New class.
(ravenscar_ops): Now a ravenscar_thread_target.
(ravenscar_resume, ravenscar_wait, ravenscar_update_thread_list)
(ravenscar_thread_alive, ravenscar_pid_to_str)
(ravenscar_fetch_registers, ravenscar_store_registers)
(ravenscar_prepare_to_store, ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint)
(ravenscar_stopped_by_watchpoint, ravenscar_stopped_data_address)
(ravenscar_mourn_inferior, ravenscar_core_of_thread)
(ravenscar_get_ada_task_ptid): Refactor as ravenscar_thread_target
methods.
(init_ravenscar_thread_ops): Delete.
(_initialize_ravenscar): Remove references to
init_ravenscar_thread_ops and complete_target_initialization.
* bsd-uthread.c (bsd_uthread_ops_hack): Delete.
(bsd_uthread_target): New class.
(bsd_uthread_ops): Now a bsd_uthread_target.
(bsd_uthread_activate): Adjust to refer to bsd_uthread_ops.
(bsd_uthread_close, bsd_uthread_mourn_inferior)
(bsd_uthread_fetch_registers, bsd_uthread_store_registers)
(bsd_uthread_wait, bsd_uthread_resume, bsd_uthread_thread_alive)
(bsd_uthread_update_thread_list, bsd_uthread_extra_thread_info)
(bsd_uthread_pid_to_str): Refactor as bsd_uthread_target methods.
(bsd_uthread_target): Delete function.
(_initialize_bsd_uthread): Remove reference to
complete_target_initialization.
* bfd-target.c (target_bfd_data): Delete. Fields folded into ...
(target_bfd): ... this new class.
(target_bfd_xfer_partial, target_bfd_get_section_table)
(target_bfd_close): Refactor as target_bfd methods.
(target_bfd::~target_bfd): New.
(target_bfd_reopen): Adjust.
(target_bfd::close): New.
* record-btrace.c (record_btrace_target): New class.
(record_btrace_ops): Now a record_btrace_target.
(record_btrace_open, record_btrace_stop_recording)
(record_btrace_disconnect, record_btrace_close)
(record_btrace_async, record_btrace_info)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from, record_btrace_call_history)
(record_btrace_call_history_range)
(record_btrace_call_history_from, record_btrace_record_method)
(record_btrace_is_replaying, record_btrace_will_replay)
(record_btrace_xfer_partial, record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store)
(record_btrace_to_get_unwinder)
(record_btrace_to_get_tailcall_unwinder, record_btrace_resume)
(record_btrace_commit_resume, record_btrace_wait)
(record_btrace_stop, record_btrace_can_execute_reverse)
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint)
(record_btrace_update_thread_list, record_btrace_thread_alive)
(record_btrace_goto_begin, record_btrace_goto_end)
(record_btrace_goto, record_btrace_stop_replaying_all)
(record_btrace_execution_direction)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): Refactor as
record_btrace_target methods.
(init_record_btrace_ops): Delete.
(_initialize_record_btrace): Remove reference to
init_record_btrace_ops.
* record-full.c (RECORD_FULL_IS_REPLAY): Adjust to always refer to
the execution_direction global.
(record_full_base_target, record_full_target)
(record_full_core_target): New classes.
(record_full_ops): Now a record_full_target.
(record_full_core_ops): Now a record_full_core_target.
(record_full_target::detach, record_full_target::disconnect)
(record_full_core_target::disconnect)
(record_full_target::mourn_inferior, record_full_target::kill):
New.
(record_full_open, record_full_close, record_full_async): Refactor
as methods of the record_full_base_target class.
(record_full_resume, record_full_commit_resume): Refactor
as methods of the record_full_target class.
(record_full_wait, record_full_stopped_by_watchpoint)
(record_full_stopped_data_address)
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): Refactor as
methods of the record_full_base_target class.
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint):
Refactor as methods of the record_full_target class.
(record_full_can_execute_reverse, record_full_get_bookmark)
(record_full_goto_bookmark, record_full_execution_direction)
(record_full_record_method, record_full_info, record_full_delete)
(record_full_is_replaying, record_full_will_replay)
(record_full_goto_begin, record_full_goto_end, record_full_goto)
(record_full_stop_replaying): Refactor as methods of the
record_full_base_target class.
(record_full_core_resume, record_full_core_kill)
(record_full_core_fetch_registers)
(record_full_core_prepare_to_store)
(record_full_core_store_registers, record_full_core_xfer_partial)
(record_full_core_insert_breakpoint)
(record_full_core_remove_breakpoint)
(record_full_core_has_execution): Refactor
as methods of the record_full_core_target class.
(record_full_base_target::supports_delete_record): New.
(init_record_full_ops): Delete.
(init_record_full_core_ops): Delete.
(record_full_save): Refactor as method of the
record_full_base_target class.
(_initialize_record_full): Remove references to
init_record_full_ops and init_record_full_core_ops.
* remote.c (remote_target, extended_remote_target): New classes.
(remote_ops): Now a remote_target.
(extended_remote_ops): Now an extended_remote_target.
(remote_insert_fork_catchpoint, remote_remove_fork_catchpoint)
(remote_insert_vfork_catchpoint, remote_remove_vfork_catchpoint)
(remote_insert_exec_catchpoint, remote_remove_exec_catchpoint)
(remote_pass_signals, remote_set_syscall_catchpoint)
(remote_program_signals, )
(remote_thread_always_alive): Remove target_ops parameter.
(remote_thread_alive, remote_thread_name)
(remote_update_thread_list, remote_threads_extra_info)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(remote_get_ada_task_ptid, remote_close, remote_start_remote)
(remote_open): Refactor as methods of remote_target.
(extended_remote_open, extended_remote_detach)
(extended_remote_attach, extended_remote_post_attach):
(extended_remote_supports_disable_randomization)
(extended_remote_create_inferior): : Refactor as method of
extended_remote_target.
(remote_set_permissions, remote_open_1, remote_detach)
(remote_follow_fork, remote_follow_exec, remote_disconnect)
(remote_resume, remote_commit_resume, remote_stop)
(remote_interrupt, remote_pass_ctrlc, remote_terminal_inferior)
(remote_terminal_ours, remote_wait, remote_fetch_registers)
(remote_prepare_to_store, remote_store_registers)
(remote_flash_erase, remote_flash_done, remote_files_info)
(remote_kill, remote_mourn, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_watchpoint_addr_within_range)
(remote_remove_watchpoint, remote_region_ok_for_hw_watchpoint)
(remote_check_watch_resources, remote_stopped_by_sw_breakpoint)
(remote_supports_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint)
(remote_supports_stopped_by_hw_breakpoint)
(remote_stopped_by_watchpoint, remote_stopped_data_address)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory): Refactor as methods of remote_target.
(remote_write_qxfer, remote_read_qxfer): Remove target_ops
parameter.
(remote_xfer_partial, remote_get_memory_xfer_limit)
(remote_search_memory, remote_rcmd, remote_memory_map)
(remote_pid_to_str, remote_get_thread_local_address)
(remote_get_tib_address, remote_read_description): Refactor as
methods of remote_target.
(remote_target::fileio_open, remote_target::fileio_pwrite)
(remote_target::fileio_pread, remote_target::fileio_close): New.
(remote_hostio_readlink, remote_hostio_fstat)
(remote_filesystem_is_local, remote_can_execute_reverse)
(remote_supports_non_stop, remote_supports_disable_randomization)
(remote_supports_multi_process, remote_supports_cond_breakpoints)
(remote_supports_enable_disable_tracepoint)
(remote_supports_string_tracing)
(remote_can_run_breakpoint_commands, remote_trace_init)
(remote_download_tracepoint, remote_can_download_tracepoint)
(remote_download_trace_state_variable, remote_enable_tracepoint)
(remote_disable_tracepoint, remote_trace_set_readonly_regions)
(remote_trace_start, remote_get_trace_status)
(remote_get_tracepoint_status, remote_trace_stop)
(remote_trace_find, remote_get_trace_state_variable_value)
(remote_save_trace_data, remote_get_raw_trace_data)
(remote_set_disconnected_tracing, remote_core_of_thread)
(remote_set_circular_trace_buffer, remote_traceframe_info)
(remote_get_min_fast_tracepoint_insn_len)
(remote_set_trace_buffer_size, remote_set_trace_notes)
(remote_use_agent, remote_can_use_agent, remote_enable_btrace)
(remote_disable_btrace, remote_teardown_btrace)
(remote_read_btrace, remote_btrace_conf)
(remote_augmented_libraries_svr4_read, remote_load)
(remote_pid_to_exec_file, remote_can_do_single_step)
(remote_execution_direction, remote_thread_handle_to_thread_info):
Refactor as methods of remote_target.
(init_remote_ops, init_extended_remote_ops): Delete.
(remote_can_async_p, remote_is_async_p, remote_async)
(remote_thread_events, remote_upload_tracepoints)
(remote_upload_trace_state_variables): Refactor as methods of
remote_target.
(_initialize_remote): Remove references to init_remote_ops and
init_extended_remote_ops.
* remote-sim.c (gdbsim_target): New class.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_kill)
(gdbsim_load, gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume, gdbsim_interrupt)
(gdbsim_wait, gdbsim_prepare_to_store, gdbsim_xfer_partial)
(gdbsim_files_info, gdbsim_mourn_inferior, gdbsim_thread_alive)
(gdbsim_pid_to_str, gdbsim_has_all_memory, gdbsim_has_memory):
Refactor as methods of gdbsim_target.
(gdbsim_ops): Now a gdbsim_target.
(init_gdbsim_ops): Delete.
(gdbsim_cntrl_c): Adjust.
(_initialize_remote_sim): Remove reference to init_gdbsim_ops.
* amd64-linux-nat.c (amd64_linux_nat_target): New class.
(the_amd64_linux_nat_target): New.
(amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Refactor as methods of
amd64_linux_nat_target.
(_initialize_amd64_linux_nat): Adjust. Set linux_target.
* i386-linux-nat.c: Don't include "linux-nat.h".
(i386_linux_nat_target): New class.
(the_i386_linux_nat_target): New.
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers, i386_linux_resume): Refactor
as methods of i386_linux_nat_target.
(_initialize_i386_linux_nat): Adjust. Set linux_target.
* inf-child.c (inf_child_ops): Delete.
(inf_child_fetch_inferior_registers)
(inf_child_store_inferior_registers): Delete.
(inf_child_post_attach, inf_child_prepare_to_store): Refactor as
methods of inf_child_target.
(inf_child_target::supports_terminal_ours)
(inf_child_target::terminal_init)
(inf_child_target::terminal_inferior)
(inf_child_target::terminal_ours_for_output)
(inf_child_target::terminal_ours, inf_child_target::interrupt)
(inf_child_target::pass_ctrlc, inf_child_target::terminal_info):
New.
(inf_child_open, inf_child_disconnect, inf_child_close)
(inf_child_mourn_inferior, inf_child_maybe_unpush_target)
(inf_child_post_startup_inferior, inf_child_can_run)
(inf_child_pid_to_exec_file): Refactor as methods of
inf_child_target.
(inf_child_follow_fork): Delete.
(inf_child_target::can_create_inferior)
(inf_child_target::can_attach): New.
(inf_child_target::has_all_memory, inf_child_target::has_memory)
(inf_child_target::has_stack, inf_child_target::has_registers)
(inf_child_target::has_execution): New.
(inf_child_fileio_open, inf_child_fileio_pwrite)
(inf_child_fileio_pread, inf_child_fileio_fstat)
(inf_child_fileio_close, inf_child_fileio_unlink)
(inf_child_fileio_readlink, inf_child_use_agent)
(inf_child_can_use_agent): Refactor as methods of
inf_child_target.
(return_zero, inf_child_target): Delete.
(inf_child_target::inf_child_target): New.
* inf-child.h: Include "target.h".
(inf_child_target): Delete function prototype.
(inf_child_target): New class.
(inf_child_open_target, inf_child_mourn_inferior)
(inf_child_maybe_unpush_target): Delete.
* inf-ptrace.c (inf_ptrace_target::~inf_ptrace_target): New.
(inf_ptrace_follow_fork, inf_ptrace_insert_fork_catchpoint)
(inf_ptrace_remove_fork_catchpoint, inf_ptrace_create_inferior)
(inf_ptrace_post_startup_inferior, inf_ptrace_mourn_inferior)
(inf_ptrace_attach, inf_ptrace_post_attach, inf_ptrace_detach)
(inf_ptrace_detach_success, inf_ptrace_kill, inf_ptrace_resume)
(inf_ptrace_wait, inf_ptrace_xfer_partial)
(inf_ptrace_thread_alive, inf_ptrace_files_info)
(inf_ptrace_pid_to_str, inf_ptrace_auxv_parse): Refactor as
methods of inf_ptrace_target.
(inf_ptrace_target): Delete function.
* inf-ptrace.h: Include "inf-child.h".
(inf_ptrace_target): Delete function declaration.
(inf_ptrace_target): New class.
(inf_ptrace_trad_target, inf_ptrace_detach_success): Delete.
* linux-nat.c (linux_target): New.
(linux_ops, linux_ops_saved, super_xfer_partial): Delete.
(linux_nat_target::~linux_nat_target): New.
(linux_child_post_attach, linux_child_post_startup_inferior)
(linux_child_follow_fork, linux_child_insert_fork_catchpoint)
(linux_child_remove_fork_catchpoint)
(linux_child_insert_vfork_catchpoint)
(linux_child_remove_vfork_catchpoint)
(linux_child_insert_exec_catchpoint)
(linux_child_remove_exec_catchpoint)
(linux_child_set_syscall_catchpoint, linux_nat_pass_signals)
(linux_nat_create_inferior, linux_nat_attach, linux_nat_detach)
(linux_nat_resume, linux_nat_stopped_by_watchpoint)
(linux_nat_stopped_data_address)
(linux_nat_stopped_by_sw_breakpoint)
(linux_nat_supports_stopped_by_sw_breakpoint)
(linux_nat_stopped_by_hw_breakpoint)
(linux_nat_supports_stopped_by_hw_breakpoint, linux_nat_wait)
(linux_nat_kill, linux_nat_mourn_inferior)
(linux_nat_xfer_partial, linux_nat_thread_alive)
(linux_nat_update_thread_list, linux_nat_pid_to_str)
(linux_nat_thread_name, linux_child_pid_to_exec_file)
(linux_child_static_tracepoint_markers_by_strid)
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_supports_non_stop, linux_nat_always_non_stop_p)
(linux_nat_supports_multi_process)
(linux_nat_supports_disable_randomization, linux_nat_async)
(linux_nat_stop, linux_nat_close, linux_nat_thread_address_space)
(linux_nat_core_of_thread, linux_nat_filesystem_is_local)
(linux_nat_fileio_open, linux_nat_fileio_readlink)
(linux_nat_fileio_unlink, linux_nat_thread_events): Refactor as
methods of linux_nat_target.
(linux_nat_wait_1, linux_xfer_siginfo, linux_proc_xfer_partial)
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Remove target_ops
parameter.
(check_stopped_by_watchpoint): Adjust.
(linux_xfer_partial): Delete.
(linux_target_install_ops, linux_target, linux_nat_add_target):
Delete.
(linux_nat_target::linux_nat_target): New.
* linux-nat.h: Include "inf-ptrace.h".
(linux_nat_target): New.
(linux_target, linux_target_install_ops, linux_nat_add_target):
Delete function declarations.
(linux_target): Declare global.
* linux-thread-db.c (thread_db_target): New.
(thread_db_target::thread_db_target): New.
(thread_db_ops): Delete.
(the_thread_db_target): New.
(thread_db_detach, thread_db_wait, thread_db_mourn_inferior)
(thread_db_update_thread_list, thread_db_pid_to_str)
(thread_db_extra_thread_info)
(thread_db_thread_handle_to_thread_info)
(thread_db_get_thread_local_address, thread_db_get_ada_task_ptid)
(thread_db_resume): Refactor as methods of thread_db_target.
(init_thread_db_ops): Delete.
(_initialize_thread_db): Remove reference to init_thread_db_ops.
* x86-linux-nat.c: Don't include "linux-nat.h".
(super_post_startup_inferior): Delete.
(x86_linux_nat_target::~x86_linux_nat_target): New.
(x86_linux_child_post_startup_inferior)
(x86_linux_read_description, x86_linux_enable_btrace)
(x86_linux_disable_btrace, x86_linux_teardown_btrace)
(x86_linux_read_btrace, x86_linux_btrace_conf): Refactor as
methods of x86_linux_nat_target.
(x86_linux_create_target): Delete. Bits folded ...
(x86_linux_add_target): ... here. Now takes a linux_nat_target
pointer.
* x86-linux-nat.h: Include "linux-nat.h" and "x86-nat.h".
(x86_linux_nat_target): New class.
(x86_linux_create_target): Delete.
(x86_linux_add_target): Now takes a linux_nat_target pointer.
* x86-nat.c (x86_insert_watchpoint, x86_remove_watchpoint)
(x86_region_ok_for_watchpoint, x86_stopped_data_address)
(x86_stopped_by_watchpoint, x86_insert_hw_breakpoint)
(x86_remove_hw_breakpoint, x86_can_use_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): Remove target_ops parameter and
make extern.
(x86_use_watchpoints): Delete.
* x86-nat.h: Include "breakpoint.h" and "target.h".
(x86_use_watchpoints): Delete.
(x86_can_use_hw_breakpoint, x86_region_ok_for_hw_watchpoint)
(x86_stopped_by_watchpoint, x86_stopped_data_address)
(x86_insert_watchpoint, x86_remove_watchpoint)
(x86_insert_hw_breakpoint, x86_remove_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): New declarations.
(x86_nat_target): New template class.
* ppc-linux-nat.c (ppc_linux_nat_target): New class.
(the_ppc_linux_nat_target): New.
(ppc_linux_fetch_inferior_registers)
(ppc_linux_can_use_hw_breakpoint)
(ppc_linux_region_ok_for_hw_watchpoint)
(ppc_linux_ranged_break_num_registers)
(ppc_linux_insert_hw_breakpoint, ppc_linux_remove_hw_breakpoint)
(ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_can_accel_watchpoint_condition)
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint)
(ppc_linux_stopped_data_address, ppc_linux_stopped_by_watchpoint)
(ppc_linux_watchpoint_addr_within_range)
(ppc_linux_masked_watch_num_registers)
(ppc_linux_store_inferior_registers, ppc_linux_auxv_parse)
(ppc_linux_read_description): Refactor as methods of
ppc_linux_nat_target.
(_initialize_ppc_linux_nat): Adjust. Set linux_target.
* procfs.c (procfs_xfer_partial): Delete forward declaration.
(procfs_target): New class.
(the_procfs_target): New.
(procfs_target): Delete function.
(procfs_auxv_parse, procfs_attach, procfs_detach)
(procfs_fetch_registers, procfs_store_registers, procfs_wait)
(procfs_xfer_partial, procfs_resume, procfs_pass_signals)
(procfs_files_info, procfs_kill_inferior, procfs_mourn_inferior)
(procfs_create_inferior, procfs_update_thread_list)
(procfs_thread_alive, procfs_pid_to_str)
(procfs_can_use_hw_breakpoint, procfs_stopped_by_watchpoint)
(procfs_stopped_data_address, procfs_insert_watchpoint)
(procfs_remove_watchpoint, procfs_region_ok_for_hw_watchpoint)
(proc_find_memory_regions, procfs_info_proc)
(procfs_make_note_section): Refactor as methods of procfs_target.
(_initialize_procfs): Adjust.
* sol-thread.c (sol_thread_target): New class.
(sol_thread_ops): Now a sol_thread_target.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers)
(sol_thread_xfer_partial, sol_thread_mourn_inferior)
(sol_thread_alive, solaris_pid_to_str, sol_update_thread_list)
(sol_get_ada_task_ptid): Refactor as methods of sol_thread_target.
(init_sol_thread_ops): Delete.
(_initialize_sol_thread): Adjust. Remove references to
init_sol_thread_ops and complete_target_initialization.
* windows-nat.c (windows_nat_target): New class.
(windows_fetch_inferior_registers)
(windows_store_inferior_registers, windows_resume, windows_wait)
(windows_attach, windows_detach, windows_pid_to_exec_file)
(windows_files_info, windows_create_inferior)
(windows_mourn_inferior, windows_interrupt, windows_kill_inferior)
(windows_close, windows_pid_to_str, windows_xfer_partial)
(windows_get_tib_address, windows_get_ada_task_ptid)
(windows_thread_name, windows_thread_alive): Refactor as
windows_nat_target methods.
(do_initial_windows_stuff): Adjust.
(windows_target): Delete function.
(_initialize_windows_nat): Adjust.
* darwin-nat.c (darwin_resume, darwin_wait_to, darwin_interrupt)
(darwin_mourn_inferior, darwin_kill_inferior)
(darwin_create_inferior, darwin_attach, darwin_detach)
(darwin_pid_to_str, darwin_thread_alive, darwin_xfer_partial)
(darwin_pid_to_exec_file, darwin_get_ada_task_ptid)
(darwin_supports_multi_process): Refactor as darwin_nat_target
methods.
(darwin_resume_to, darwin_files_info): Delete.
(_initialize_darwin_inferior): Rename to ...
(_initialize_darwin_nat): ... this. Adjust to C++ification.
* darwin-nat.h: Include "inf-child.h".
(darwin_nat_target): New class.
(darwin_complete_target): Delete.
* i386-darwin-nat.c (i386_darwin_nat_target): New class.
(darwin_target): New.
(i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Refactor as methods of
darwin_nat_target.
(darwin_complete_target): Delete, with ...
(_initialize_i386_darwin_nat): ... bits factored out here.
* alpha-linux-nat.c (alpha_linux_nat_target): New class.
(the_alpha_linux_nat_target): New.
(alpha_linux_register_u_offset): Refactor as
alpha_linux_nat_target method.
(_initialize_alpha_linux_nat): Adjust.
* linux-nat-trad.c (inf_ptrace_register_u_offset): Delete.
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers): Refact as
methods of linux_nat_trad_target.
(linux_trad_target): Delete.
* linux-nat-trad.h (linux_trad_target): Delete function.
(linux_nat_trad_target): New class.
* mips-linux-nat.c (mips_linux_nat_target): New class.
(super_fetch_registers, super_store_registers, super_close):
Delete.
(the_mips_linux_nat_target): New.
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers)
(mips64_linux_fetch_registers, mips64_linux_store_registers)
(mips_linux_register_u_offset, mips_linux_read_description)
(mips_linux_can_use_hw_breakpoint)
(mips_linux_stopped_by_watchpoint)
(mips_linux_stopped_data_address)
(mips_linux_region_ok_for_hw_watchpoint)
(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
(mips_linux_close): Refactor as methods of mips_linux_nat.
(_initialize_mips_linux_nat): Adjust to C++ification.
* aix-thread.c (aix_thread_target): New class.
(aix_thread_ops): Now an aix_thread_target.
(aix_thread_detach, aix_thread_resume, aix_thread_wait)
(aix_thread_fetch_registers, aix_thread_store_registers)
(aix_thread_xfer_partial, aix_thread_mourn_inferior)
(aix_thread_thread_alive, aix_thread_pid_to_str)
(aix_thread_extra_thread_info, aix_thread_get_ada_task_ptid):
Refactor as methods of aix_thread_target.
(init_aix_thread_ops): Delete.
(_initialize_aix_thread): Remove references to init_aix_thread_ops
and complete_target_initialization.
* rs6000-nat.c (rs6000_xfer_shared_libraries): Delete.
(rs6000_nat_target): New class.
(the_rs6000_nat_target): New.
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers)
(rs6000_xfer_partial, rs6000_wait, rs6000_create_inferior)
(rs6000_xfer_shared_libraries): Refactor as rs6000_nat_target methods.
(super_create_inferior): Delete.
(_initialize_rs6000_nat): Adjust to C++ification.
* arm-linux-nat.c (arm_linux_nat_target): New class.
(the_arm_linux_nat_target): New.
(arm_linux_fetch_inferior_registers)
(arm_linux_store_inferior_registers, arm_linux_read_description)
(arm_linux_can_use_hw_breakpoint, arm_linux_insert_hw_breakpoint)
(arm_linux_remove_hw_breakpoint)
(arm_linux_region_ok_for_hw_watchpoint)
(arm_linux_insert_watchpoint, arm_linux_remove_watchpoint)
(arm_linux_stopped_data_address, arm_linux_stopped_by_watchpoint)
(arm_linux_watchpoint_addr_within_range): Refactor as methods of
arm_linux_nat_target.
(_initialize_arm_linux_nat): Adjust to C++ification.
* aarch64-linux-nat.c (aarch64_linux_nat_target): New class.
(the_aarch64_linux_nat_target): New.
(aarch64_linux_fetch_inferior_registers)
(aarch64_linux_store_inferior_registers)
(aarch64_linux_child_post_startup_inferior)
(aarch64_linux_read_description)
(aarch64_linux_can_use_hw_breakpoint)
(aarch64_linux_insert_hw_breakpoint)
(aarch64_linux_remove_hw_breakpoint)
(aarch64_linux_insert_watchpoint, aarch64_linux_remove_watchpoint)
(aarch64_linux_region_ok_for_hw_watchpoint)
(aarch64_linux_stopped_data_address)
(aarch64_linux_stopped_by_watchpoint)
(aarch64_linux_watchpoint_addr_within_range)
(aarch64_linux_can_do_single_step): Refactor as methods of
aarch64_linux_nat_target.
(super_post_startup_inferior): Delete.
(_initialize_aarch64_linux_nat): Adjust to C++ification.
* hppa-linux-nat.c (hppa_linux_nat_target): New class.
(the_hppa_linux_nat_target): New.
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Refactor as methods of
hppa_linux_nat_target.
(_initialize_hppa_linux_nat): Adjust to C++ification.
* ia64-linux-nat.c (ia64_linux_nat_target): New class.
(the_ia64_linux_nat_target): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
(ia64_linux_stopped_data_address)
(ia64_linux_stopped_by_watchpoint, ia64_linux_fetch_registers)
(ia64_linux_store_registers, ia64_linux_xfer_partial): Refactor as
ia64_linux_nat_target methods.
(super_xfer_partial): Delete.
(_initialize_ia64_linux_nat): Adjust to C++ification.
* m32r-linux-nat.c (m32r_linux_nat_target): New class.
(the_m32r_linux_nat_target): New.
(m32r_linux_fetch_inferior_registers)
(m32r_linux_store_inferior_registers): Refactor as
m32r_linux_nat_target methods.
(_initialize_m32r_linux_nat): Adjust to C++ification.
* m68k-linux-nat.c (m68k_linux_nat_target): New class.
(the_m68k_linux_nat_target): New.
(m68k_linux_fetch_inferior_registers)
(m68k_linux_store_inferior_registers): Refactor as
m68k_linux_nat_target methods.
(_initialize_m68k_linux_nat): Adjust to C++ification.
* s390-linux-nat.c (s390_linux_nat_target): New class.
(the_s390_linux_nat_target): New.
(s390_linux_fetch_inferior_registers)
(s390_linux_store_inferior_registers, s390_stopped_by_watchpoint)
(s390_insert_watchpoint, s390_remove_watchpoint)
(s390_can_use_hw_breakpoint, s390_insert_hw_breakpoint)
(s390_remove_hw_breakpoint, s390_region_ok_for_hw_watchpoint)
(s390_auxv_parse, s390_read_description): Refactor as methods of
s390_linux_nat_target.
(_initialize_s390_nat): Adjust to C++ification.
* sparc-linux-nat.c (sparc_linux_nat_target): New class.
(the_sparc_linux_nat_target): New.
(_initialize_sparc_linux_nat): Adjust to C++ification.
* sparc-nat.c (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc64-linux-nat.c (sparc64_linux_nat_target): New class.
(the_sparc64_linux_nat_target): New.
(_initialize_sparc64_linux_nat): Adjust to C++ification.
* spu-linux-nat.c (spu_linux_nat_target): New class.
(the_spu_linux_nat_target): New.
(spu_child_post_startup_inferior, spu_child_post_attach)
(spu_child_wait, spu_fetch_inferior_registers)
(spu_store_inferior_registers, spu_xfer_partial)
(spu_can_use_hw_breakpoint): Refactor as spu_linux_nat_target
methods.
(_initialize_spu_nat): Adjust to C++ification.
* tilegx-linux-nat.c (tilegx_linux_nat_target): New class.
(the_tilegx_linux_nat_target): New.
(fetch_inferior_registers, store_inferior_registers):
Refactor as methods.
(_initialize_tile_linux_nat): Adjust to C++ification.
* xtensa-linux-nat.c (xtensa_linux_nat_target): New class.
(the_xtensa_linux_nat_target): New.
(xtensa_linux_fetch_inferior_registers)
(xtensa_linux_store_inferior_registers): Refactor as
xtensa_linux_nat_target methods.
(_initialize_xtensa_linux_nat): Adjust to C++ification.
* fbsd-nat.c (USE_SIGTRAP_SIGINFO): Delete.
(fbsd_pid_to_exec_file, fbsd_find_memory_regions)
(fbsd_find_memory_regions, fbsd_info_proc, fbsd_xfer_partial)
(fbsd_thread_alive, fbsd_pid_to_str, fbsd_thread_name)
(fbsd_update_thread_list, fbsd_resume, fbsd_wait)
(fbsd_stopped_by_sw_breakpoint)
(fbsd_supports_stopped_by_sw_breakpoint, fbsd_follow_fork)
(fbsd_insert_fork_catchpoint, fbsd_remove_fork_catchpoint)
(fbsd_insert_vfork_catchpoint, fbsd_remove_vfork_catchpoint)
(fbsd_post_startup_inferior, fbsd_post_attach)
(fbsd_insert_exec_catchpoint, fbsd_remove_exec_catchpoint)
(fbsd_set_syscall_catchpoint)
(super_xfer_partial, super_resume, super_wait)
(fbsd_supports_stopped_by_hw_breakpoint): Delete.
(fbsd_handle_debug_trap): Remove target_ops parameter.
(fbsd_nat_add_target): Delete.
* fbsd-nat.h: Include "inf-ptrace.h".
(fbsd_nat_add_target): Delete.
(USE_SIGTRAP_SIGINFO): Define.
(fbsd_nat_target): New class.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Remove target_ops parameter.
(amd64bsd_target): Delete.
* amd64-bsd-nat.h: New file.
* amd64-fbsd-nat.c: Include "amd64-bsd-nat.h" instead of
"x86-bsd-nat.h".
(amd64_fbsd_nat_target): New class.
(the_amd64_fbsd_nat_target): New.
(amd64fbsd_read_description): Refactor as method of
amd64_fbsd_nat_target.
(amd64_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_amd64fbsd_nat): Adjust to C++ification.
* amd64-nat.h (amd64bsd_target): Delete function declaration.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Remove target_ops parameter.
(i386bsd_target): Delete.
* i386-bsd-nat.h (i386bsd_target): Delete function declaration.
(i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Declare.
(i386_bsd_nat_target): New class.
* i386-fbsd-nat.c (i386_fbsd_nat_target): New class.
(the_i386_fbsd_nat_target): New.
(i386fbsd_resume, i386fbsd_read_description): Refactor as
i386_fbsd_nat_target methods.
(i386_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_i386fbsd_nat): Adjust to C++ification.
* x86-bsd-nat.c (super_mourn_inferior): Delete.
(x86bsd_mourn_inferior, x86bsd_target): Delete.
(_initialize_x86_bsd_nat): Adjust to C++ification.
* x86-bsd-nat.h: Include "x86-nat.h".
(x86bsd_target): Delete declaration.
(x86bsd_nat_target): New class.
* aarch64-fbsd-nat.c (aarch64_fbsd_nat_target): New class.
(the_aarch64_fbsd_nat_target): New.
(aarch64_fbsd_fetch_inferior_registers)
(aarch64_fbsd_store_inferior_registers): Refactor as methods of
aarch64_fbsd_nat_target.
(_initialize_aarch64_fbsd_nat): Adjust to C++ification.
* alpha-bsd-nat.c (alpha_bsd_nat_target): New class.
(the_alpha_bsd_nat_target): New.
(alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Refactor as
alpha_bsd_nat_target methods.
(_initialize_alphabsd_nat): Refactor as methods of
alpha_bsd_nat_target.
* amd64-nbsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_nbsd_nat_target): New.
(_initialize_amd64nbsd_nat): Adjust to C++ification.
* amd64-obsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_obsd_nat_target): New.
(_initialize_amd64obsd_nat): Adjust to C++ification.
* arm-fbsd-nat.c (arm_fbsd_nat_target): New.
(the_arm_fbsd_nat_target): New.
(arm_fbsd_fetch_inferior_registers)
(arm_fbsd_store_inferior_registers, arm_fbsd_read_description):
(_initialize_arm_fbsd_nat): Refactor as methods of
arm_fbsd_nat_target.
(_initialize_arm_fbsd_nat): Adjust to C++ification.
* arm-nbsd-nat.c (arm_netbsd_nat_target): New class.
(the_arm_netbsd_nat_target): New.
(armnbsd_fetch_registers, armnbsd_store_registers): Refactor as
arm_netbsd_nat_target.
(_initialize_arm_netbsd_nat): Adjust to C++ification.
* hppa-nbsd-nat.c (hppa_nbsd_nat_target): New class.
(the_hppa_nbsd_nat_target): New.
(hppanbsd_fetch_registers, hppanbsd_store_registers): Refactor as
hppa_nbsd_nat_target methods.
(_initialize_hppanbsd_nat): Adjust to C++ification.
* hppa-obsd-nat.c (hppa_obsd_nat_target): New class.
(the_hppa_obsd_nat_target): New.
(hppaobsd_fetch_registers, hppaobsd_store_registers): Refactor as
methods of hppa_obsd_nat_target.
(_initialize_hppaobsd_nat): Adjust to C++ification. Use
add_target.
* i386-nbsd-nat.c (the_i386_nbsd_nat_target): New.
(_initialize_i386nbsd_nat): Adjust to C++ification. Use
add_target.
* i386-obsd-nat.c (the_i386_obsd_nat_target): New.
(_initialize_i386obsd_nat): Use add_target.
* m68k-bsd-nat.c (m68k_bsd_nat_target): New class.
(the_m68k_bsd_nat_target): New.
(m68kbsd_fetch_inferior_registers)
(m68kbsd_store_inferior_registers): Refactor as methods of
m68k_bsd_nat_target.
(_initialize_m68kbsd_nat): Adjust to C++ification.
* mips-fbsd-nat.c (mips_fbsd_nat_target): New class.
(the_mips_fbsd_nat_target): New.
(mips_fbsd_fetch_inferior_registers)
(mips_fbsd_store_inferior_registers): Refactor as methods of
mips_fbsd_nat_target.
(_initialize_mips_fbsd_nat): Adjust to C++ification. Use
add_target.
* mips-nbsd-nat.c (mips_nbsd_nat_target): New class.
(the_mips_nbsd_nat_target): New.
(mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Refactor as methods of
mips_nbsd_nat_target.
(_initialize_mipsnbsd_nat): Adjust to C++ification.
* mips64-obsd-nat.c (mips64_obsd_nat_target): New class.
(the_mips64_obsd_nat_target): New.
(mips64obsd_fetch_inferior_registers)
(mips64obsd_store_inferior_registers): Refactor as methods of
mips64_obsd_nat_target.
(_initialize_mips64obsd_nat): Adjust to C++ification. Use
add_target.
* nbsd-nat.c (nbsd_pid_to_exec_file): Refactor as method of
nbsd_nat_target.
* nbsd-nat.h: Include "inf-ptrace.h".
(nbsd_nat_target): New class.
* obsd-nat.c (obsd_pid_to_str, obsd_update_thread_list)
(obsd_wait): Refactor as methods of obsd_nat_target.
(obsd_add_target): Delete.
* obsd-nat.h: Include "inf-ptrace.h".
(obsd_nat_target): New class.
* ppc-fbsd-nat.c (ppc_fbsd_nat_target): New class.
(the_ppc_fbsd_nat_target): New.
(ppcfbsd_fetch_inferior_registers)
(ppcfbsd_store_inferior_registers): Refactor as methods of
ppc_fbsd_nat_target.
(_initialize_ppcfbsd_nat): Adjust to C++ification. Use
add_target.
* ppc-nbsd-nat.c (ppc_nbsd_nat_target): New class.
(the_ppc_nbsd_nat_target): New.
(ppcnbsd_fetch_inferior_registers)
(ppcnbsd_store_inferior_registers): Refactor as methods of
ppc_nbsd_nat_target.
(_initialize_ppcnbsd_nat): Adjust to C++ification.
* ppc-obsd-nat.c (ppc_obsd_nat_target): New class.
(the_ppc_obsd_nat_target): New.
(ppcobsd_fetch_registers, ppcobsd_store_registers): Refactor as
methods of ppc_obsd_nat_target.
(_initialize_ppcobsd_nat): Adjust to C++ification. Use
add_target.
* sh-nbsd-nat.c (sh_nbsd_nat_target): New class.
(the_sh_nbsd_nat_target): New.
(shnbsd_fetch_inferior_registers)
(shnbsd_store_inferior_registers): Refactor as methods of
sh_nbsd_nat_target.
(_initialize_shnbsd_nat): Adjust to C++ification.
* sparc-nat.c (sparc_xfer_wcookie): Make extern.
(inf_ptrace_xfer_partial): Delete.
(sparc_xfer_partial, sparc_target): Delete.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers, sparc_xfer_wcookie): Declare.
(sparc_target): Delete function declaration.
(sparc_target): New template class.
* sparc-nbsd-nat.c (the_sparc_nbsd_nat_target): New.
(_initialize_sparcnbsd_nat): Adjust to C++ification.
* sparc64-fbsd-nat.c (the_sparc64_fbsd_nat_target): New.
(_initialize_sparc64fbsd_nat): Adjust to C++ification. Use
add_target.
* sparc64-nbsd-nat.c (the_sparc64_nbsd_nat_target): New.
(_initialize_sparc64nbsd_nat): Adjust to C++ification.
* sparc64-obsd-nat.c (the_sparc64_obsd_nat_target): New.
(_initialize_sparc64obsd_nat): Adjust to C++ification. Use
add_target.
* vax-bsd-nat.c (vax_bsd_nat_target): New class.
(the_vax_bsd_nat_target): New.
(vaxbsd_fetch_inferior_registers)
(vaxbsd_store_inferior_registers): Refactor as vax_bsd_nat_target
methods.
(_initialize_vaxbsd_nat): Adjust to C++ification.
* bsd-kvm.c (bsd_kvm_target): New class.
(bsd_kvm_ops): Now a bsd_kvm_target.
(bsd_kvm_open, bsd_kvm_close, bsd_kvm_xfer_partial)
(bsd_kvm_files_info, bsd_kvm_fetch_registers)
(bsd_kvm_thread_alive, bsd_kvm_pid_to_str): Refactor as methods of
bsd_kvm_target.
(bsd_kvm_return_one): Delete.
(bsd_kvm_add_target): Adjust to C++ification.
* nto-procfs.c (nto_procfs_target, nto_procfs_target_native)
(nto_procfs_target_procfs): New classes.
(procfs_open_1, procfs_thread_alive, procfs_update_thread_list)
(procfs_files_info, procfs_pid_to_exec_file, procfs_attach)
(procfs_post_attach, procfs_wait, procfs_fetch_registers)
(procfs_xfer_partial, procfs_detach, procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint, procfs_resume)
(procfs_mourn_inferior, procfs_create_inferior, procfs_interrupt)
(procfs_kill_inferior, procfs_store_registers)
(procfs_pass_signals, procfs_pid_to_str, procfs_can_run): Refactor
as methods of nto_procfs_target.
(nto_procfs_ops): Now an nto_procfs_target_procfs.
(nto_native_ops): Delete.
(procfs_open, procfs_native_open): Delete.
(nto_native_ops): Now an nto_procfs_target_native.
(init_procfs_targets): Adjust to C++ification.
(procfs_can_use_hw_breakpoint, procfs_remove_hw_watchpoint)
(procfs_insert_hw_watchpoint, procfs_stopped_by_watchpoint):
Refactor as methods of nto_procfs_target.
* go32-nat.c (go32_nat_target): New class.
(the_go32_nat_target): New.
(go32_attach, go32_resume, go32_wait, go32_fetch_registers)
(go32_store_registers, go32_xfer_partial, go32_files_info)
(go32_kill_inferior, go32_create_inferior, go32_mourn_inferior)
(go32_terminal_init, go32_terminal_info, go32_terminal_inferior)
(go32_terminal_ours, go32_pass_ctrlc, go32_thread_alive)
(go32_pid_to_str): Refactor as methods of go32_nat_target.
(go32_target): Delete.
(_initialize_go32_nat): Adjust to C++ification.
* gnu-nat.c (gnu_wait, gnu_resume, gnu_kill_inferior)
(gnu_mourn_inferior, gnu_create_inferior, gnu_attach, gnu_detach)
(gnu_stop, gnu_thread_alive, gnu_xfer_partial)
(gnu_find_memory_regions, gnu_pid_to_str): Refactor as methods of
gnu_nat_target.
(gnu_target): Delete.
* gnu-nat.h (gnu_target): Delete.
(gnu_nat_target): New class.
* i386-gnu-nat.c (gnu_base_target): New.
(i386_gnu_nat_target): New class.
(the_i386_gnu_nat_target): New.
(_initialize_i386gnu_nat): Adjust to C++ification.
gdb/testsuite/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.exp: Adjust to to_resume and
to_log_command renames.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
|
|
In the multi-target branch, I found no need for the target_close vs
target_xclose distinction. Heap-allocated targets simply delete
themselves in their target_close implementation, while
singleton/static targets don't.
The target_ops C++ification patches will add more commentary around
target_ops's destructor, but there's no destructor yet...
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* bfd-target.c (target_bfd_xclose): Rename to ...
(target_bfd_close): ... this.
(target_bfd_reopen): Adjust.
* target.c (target_close): Remove references to to_xclose.
* target.h (target_ops::to_xclose): Delete.
(target_ops::to_close): Update comments.
|
|
A future patch will propose making the remote target's target_ops be
heap-allocated (to make it possible to have multiple instances of
remote targets, for multiple simultaneous connections), and will
delete/destroy the remote target at target_close time.
That change trips on a latent problem, though. File I/O handles
remain open even after the target is gone, with a dangling pointer to
a target that no longer exists. This results in GDB crashing when it
calls the target_ops backend associated with the file handle:
(gdb) Disconnect
Ending remote debugging.
* GDB crashes deferencing a dangling pointer
Backtrace:
#0 0x00007f79338570a0 in main_arena () at /lib64/libc.so.6
#1 0x0000000000858bfe in target_fileio_close(int, int*) (fd=1, target_errno=0x7ffe0499a4c8)
at src/gdb/target.c:2980
#2 0x00000000007088bd in gdb_bfd_iovec_fileio_close(bfd*, void*) (abfd=0x1a631b0, stream=0x223c9d0)
at src/gdb/gdb_bfd.c:353
#3 0x0000000000930906 in opncls_bclose (abfd=0x1a631b0) at src/bfd/opncls.c:528
#4 0x0000000000930cf9 in bfd_close_all_done (abfd=0x1a631b0) at src/bfd/opncls.c:768
#5 0x0000000000930cb3 in bfd_close (abfd=0x1a631b0) at src/bfd/opncls.c:735
#6 0x0000000000708dc5 in gdb_bfd_close_or_warn(bfd*) (abfd=0x1a631b0) at src/gdb/gdb_bfd.c:511
#7 0x00000000007091a2 in gdb_bfd_unref(bfd*) (abfd=0x1a631b0) at src/gdb/gdb_bfd.c:615
#8 0x000000000079ed8e in objfile::~objfile() (this=0x2154730, __in_chrg=<optimized out>)
at src/gdb/objfiles.c:682
#9 0x000000000079fd1a in objfile_purge_solibs() () at src/gdb/objfiles.c:1065
#10 0x00000000008162ca in no_shared_libraries(char const*, int) (ignored=0x0, from_tty=1)
at src/gdb/solib.c:1251
#11 0x000000000073b89b in disconnect_command(char const*, int) (args=0x0, from_tty=1)
at src/gdb/infcmd.c:3035
This goes unnoticed in current master, because the current remote
target's target_ops is never destroyed nowadays, so we end up calling:
remote_hostio_close -> remote_hostio_send_command
which gracefully fails with FILEIO_ENOSYS if remote_desc is NULL
(because the target is closed).
Fix this by invalidating a target's file I/O handles when the target
is closed.
With this change, remote_hostio_send_command no longer needs to handle the
case of being called with a closed remote target, originally added here:
<https://sourceware.org/ml/gdb-patches/2008-08/msg00359.html>.
gdb/ChangeLog:
2018-04-11 Pedro Alves <palves@redhat.com>
* target.c (fileio_fh_t::t): Add comment.
(target_fileio_pwrite, target_fileio_pread, target_fileio_fstat)
(target_fileio_close): Handle a NULL target.
(invalidate_fileio_fh): New.
(target_close): Call it.
* remote.c (remote_hostio_send_command): No longer check whether
remote_desc is open.
|
|
Preparation for the next patch.
- Replace VEC with std::vector.
- Rewrite a couple macros as methods/functions.
- While at it, rename fileio_fh_t::fd as fileio_fh_t::target_fd to
avoid confusion between target and host file descriptors.
gdb/ChangeLog:
2018-04-11 Pedro Alves <palves@redhat.com>
* target.c (fileio_fh_t): Make it a named struct instead of a
typedef.
(fileio_fh_t::is_closed): New method.
(DEF_VEC_O (fileio_fh_t)): Remove.
(fileio_fhandles): Now a std::vector.
(is_closed_fileio_fh): Delete.
(acquire_fileio_fd): Adjust. Rename parameters.
(release_fileio_fd): Adjust.
(fileio_fd_to_fh): Reimplement as a function instead of a macro.
(target_fileio_pwrite, target_fileio_pread, target_fileio_fstat)
(target_fileio_close): Adjust.
|
|
This patch started by changing target_read_alloc_1 to return a
byte_vector, to avoid manual memory management (in target_read_alloc_1
and in the callers). To communicate failures to the callers, it
actually returns a gdb::optional<gdb::byte_vector>.
Adjusting target_read_stralloc was a bit more tricky, since it wants to
return a buffer of char, and not gdb_byte. Since you can't just cast a
gdb::byte_vector into a gdb::def_vector<char>, I made
target_read_alloc_1 templated, so both versions (that return vectors of
gdb_byte and char) are generated. Since target_read_stralloc now
returns a gdb::char_vector instead of a gdb::unique_xmalloc_ptr<char>, a
few callers need to be adjusted.
gdb/ChangeLog:
* common/byte-vector.h (char_vector): New type.
* target.h (target_read_alloc): Return
gdb::optional<byte_vector>.
(target_read_stralloc): Return gdb::optional<char_vector>.
(target_get_osdata): Return gdb::optional<char_vector>.
* target.c (target_read_alloc_1): Templatize. Replacement
manual memory management with vector.
(target_read_alloc): Change return type, adjust.
(target_read_stralloc): Change return type, adjust.
(target_get_osdata): Change return type, adjust.
* auxv.c (struct auxv_info) <length>: Remove.
<data>: Change type to gdb::optional<byte_vector>.
(auxv_inferior_data_cleanup): Free auxv_info with delete.
(get_auxv_inferior_data): Allocate auxv_info with new, adjust.
(target_auxv_search): Adjust.
(fprint_target_auxv): Adjust.
* avr-tdep.c (avr_io_reg_read_command): Adjust.
* linux-tdep.c (linux_spu_make_corefile_notes): Adjust.
(linux_make_corefile_notes): Adjust.
* osdata.c (get_osdata): Adjust.
* remote.c (remote_get_threads_with_qxfer): Adjust.
(remote_memory_map): Adjust.
(remote_traceframe_info): Adjust.
(btrace_read_config): Adjust.
(remote_read_btrace): Adjust.
(remote_pid_to_exec_file): Adjust.
* solib-aix.c (solib_aix_get_library_list): Adjust.
* solib-dsbt.c (decode_loadmap): Don't free buf.
(dsbt_get_initial_loadmaps): Adjust.
* solib-svr4.c (svr4_current_sos_via_xfer_libraries): Adjust.
* solib-target.c (solib_target_current_sos): Adjust.
* tracepoint.c (sdata_make_value): Adjust.
* xml-support.c (xinclude_start_include): Adjust.
(xml_fetch_content_from_file): Adjust.
* xml-support.h (xml_fetch_another): Change return type.
(xml_fetch_content_from_file): Change return type.
* xml-syscall.c (xml_init_syscalls_info): Adjust.
* xml-tdesc.c (file_read_description_xml): Adjust.
(fetch_available_features_from_target): Change return type.
(target_fetch_description_xml): Adjust.
(target_read_description_xml): Adjust.
|
|
This changes the out parameter of target_read_string to be a
unique_xmalloc_ptr. This avoids a cleanup and sets the stage for more
cleanup removals.
This patch also removes a seemingly needless alloca from
print_subexp_standard.
gdb/ChangeLog
2018-03-30 Tom Tromey <tom@tromey.com>
* windows-nat.c (handle_output_debug_string, handle_exception):
Update.
* target.h (target_read_string): Update.
* target.c (target_read_string): Change "string" to
unique_xmalloc_ptr.
* solib-svr4.c (open_symbol_file_object, svr4_read_so_list):
Update.
* solib-frv.c (frv_current_sos): Update.
* solib-dsbt.c (dsbt_current_sos): Update.
* solib-darwin.c (darwin_current_sos): Update.
* linux-thread-db.c (inferior_has_bug): Update.
* expprint.c (print_subexp_standard) <case OP_OBJC_MSGCALL>:
Update. Remove alloca.
* ada-lang.c (ada_main_name): Update.
|
|
This removes target_fileio_close_cleanup in favor of a new RAII class.
The new class is similar to scoped_fd but calls
target_fileio_close_cleanup rather than close.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-17 Tom Tromey <tom@tromey.com>
* target.c (class scoped_target_fd): New.
(target_fileio_close_cleanup): Remove.
(target_fileio_read_alloc_1): Use scoped_target_fd.
|
|
This changes to_fileio_readlink and target_fileio_readlink to return a
gdb::optional<std::sring>, and then fixes up the callers and
implementations. This allows the removal of some cleanups.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-07 Tom Tromey <tom@tromey.com>
* linux-tdep.c (linux_info_proc): Update.
* target.h (struct target_ops) <to_fileio_readlink>: Return
optional<string>.
(target_fileio_readlink): Return optional<string>.
* remote.c (remote_hostio_readlink): Return optional<string>.
* inf-child.c (inf_child_fileio_readlink): Return
optional<string>.
* target.c (target_fileio_readlink): Return optional<string>.
|
|
These flags are returned as an int by get_call_history_modifiers, and
get cast back to record_print_flags in the btrace code. Instead, we can
make the arguments of that type from start to end.
gdb/ChangeLog:
* record.c (get_call_history_modifiers): Return a
record_print_flags.
(cmd_record_call_history): Adjust.
* record-btrace.c (record_btrace_call_history): Adjust.
(record_btrace_call_history_range): Adjust.
(record_btrace_call_history_from): Adjust.
* target-debug.h (target_debug_print_record_print_flags): New.
* target-delegates.c: Re-generate.
* target.c (target_call_history): Change flags type.
(target_call_history_from): Likewise.
(target_call_history_range): Likewise.
* target.h (struct target_ops) <target_call_history>: Likewise.
(target_call_history_from): Likewise.
(target_call_history_range): Likewise.
|
|
Remove the to_supports_btrace target method and instead rely on detecting errors
when trying to enable recording. This will also provide a suitable error
message explaining why recording is not possible.
For remote debugging, gdbserver will now always advertise branch tracing related
packets. When talking to an older GDB, this will cause GDB to try to enable
branch tracing and gdbserver to report a suitable error message every time.
An older gdbserver will not advertise branch tracing related packets if the
one-time check failed, so a newer GDB with this patch will fail to enable branch
tracing at remote_enable_btrace() rather than at btrace_enable(). The error
message is the same in both cases so there should be no user-visible change.
gdb/
* btrace.c (btrace_enable): Remove target_supports_btrace call.
* nat/linux-btrace.c (perf_event_pt_event_type): Move.
(kernel_supports_bts, kernel_supports_pt, linux_supports_bts)
(linux_supports_pt, linux_supports_btrace): Remove.
(linux_enable_bts): Call cpu_supports_bts.
* nat/linux-btrace.h (linux_supports_btrace): Remove.
* remote.c (remote_supports_btrace): Remove.
(init_remote_ops): Remove remote_supports_btrace.
* target-delegates.c: Regenerated.
* target.c (target_supports_btrace): Remove.
* target.h (target_ops) <to_supports_btrace>: Remove
(target_supports_btrace): Remove.
* x86-linux-nat.c (x86_linux_create_target): Remove
linux_supports_btrace.
gdbserver/
* linux-low.c (linux_target_ops): Remove linux_supports_btrace.
* nto-low.c (nto_target_ops): Remove NULL for supports_btrace.
* spu-low.c (spu_target_ops): Likewise.
* win32-low.c (win32_target_ops): Likewise.
* server.c (supported_btrace_packets): Report packets unconditionally.
* target.h (target_ops) <supports_btrace>: Remove.
(target_supports_btrace): Remove.
|
|
In my multi-target branch I ran into problems with GDB's terminal
handling that exist in master as well, with multi-inferior debugging.
This patch adds a testcase for said problems
(gdb.multi/multi-term-settings.exp), fixes the problems, fixes PR
gdb/13211 as well (and adds a testcase for that too,
gdb.base/interrupt-daemon.exp).
The basis of the problem I ran into is the following. Consider a
scenario where you have:
- inferior 1 - started with "attach", process is running on some
other terminal.
- inferior 2 - started with "run", process is sharing gdb's terminal.
In this scenario, when you stop/resume both inferiors, you want GDB to
save/restore the terminal settings of inferior 2, the one that is
sharing GDB's terminal. I.e., you want inferior 2 to "own" the
terminal (in target_terminal::is_ours/target_terminal::is_inferior
sense).
Unfortunately, that's not what you get currently. Because GDB doesn't
know whether an attached inferior is actually sharing GDB's terminal,
it tries to save/restore its settings anyway, ignoring errors. In
this case, this is pointless, because inferior 1 is running on a
different terminal, but GDB doesn't know better.
And then, because it is only possible to have the terminal settings of
a single inferior be in effect at a time, or make one inferior/pgrp be
the terminal's foreground pgrp (aka, only one inferior can "own" the
terminal, ignoring fork children here), if GDB happens to try to
restore the terminal settings of inferior 1 first, then GDB never
restores the terminal settings of inferior 2.
This patch fixes that and a few things more along the way:
- Moves enum target_terminal::terminal_state out of the
target_terminal class (it's currently private) and makes it a
scoped enum so that it can be easily used elsewhere.
- Replaces the inflow.c:terminal_is_ours boolean with a
target_terminal_state variable. This allows distinguishing is_ours
and is_ours_for_output states. This allows finally making
child_terminal_ours_1 do something with its "output_only"
parameter.
- Makes each inferior have its own copy of the
is_ours/is_ours_for_output/is_inferior state.
- Adds a way for GDB to tell whether the inferior is sharing GDB's
terminal. Works best on Linux and Solaris; the fallback works just
as well as currently.
- With that, we can remove the inf->attach_flag tests from
child_terminal_inferior/child_terminal_ours.
- Currently target_ops.to_ours is responsible for both saving the
current inferior's terminal state, and restoring gdb's state.
Because each inferior has its own terminal state (possibly handled
by different targets in a multi-target world, even), we need to
split the inferior-saving part from the gdb-restoring part. The
patch adds a new target_ops.to_save_inferior target method for
that.
- Adds a new target_terminal::save_inferior() function, so that
sequences like:
scoped_restore_terminal_state save_state;
target_terminal::ours_for_output ();
... restore back inferiors that were
target_terminal_state::is_inferior before back to is_inferior, and
leaves inferiors that were is_ours alone.
- Along the way, this adds a default implementation of
target_pass_ctrlc to inflow.c (for inf-child.c), that handles
passing the Ctrl-C to a process running on GDB's terminal or to
some other process otherwise.
- Similarly, adds a new target default implementation of
target_interrupt, for the "interrupt" command. The current
implementation of this hook in inf-ptrace.c kills the whole process
group, but that's incorrect/undesirable because we may not be
attached to all processes in the process group. And also, it's
incorrect because inferior_process_group() doesn't really return
the inferior's real process group id if the inferior is not a
process group leader... This is the cause of PR gdb/13211 [1],
which this patch fixes. While at it, that target method's "ptid"
parameter is eliminated, because it's not really used.
- A new test is included that exercises and fixes PR gdb/13211, and
also fixes a GDB issue reported on stackoverflow that I ran into
while working on this [2]. The problem is similar to PR gdb/13211,
except that it also triggers with Ctrl-C. When debugging a daemon
(i.e., a process that disconnects from the controlling terminal and
is not a process group leader, then Ctrl-C doesn't work, you just
can't interrupt the inferior at all, resulting in a hung debug
session. The problem is that since the inferior is no longer
associated with gdb's session / controlling terminal, then trying
to put the inferior in the foreground fails. And so Ctrl-C never
reaches the inferior directly. pass_signal is only used when the
inferior is attached, but that is not the case here. This is fixed
by the new child_pass_ctrlc. Without the fix, the new
interrupt-daemon.exp testcase fails with timeout waiting for a
SIGINT that never arrives.
[1] PR gdb/13211 - Async / Process group and interrupt not working
https://sourceware.org/bugzilla/show_bug.cgi?id=13211
[2] GDB not reacting Ctrl-C when after fork() and setsid()
https://stackoverflow.com/questions/46101292/gdb-not-reacting-ctrl-c-when-after-fork-and-setsid
Note this patch does _not_ fix:
- PR gdb/14559 - The 'interrupt' command does not work if sigwait is in use
https://sourceware.org/bugzilla/show_bug.cgi?id=14559
- PR gdb/9425 - When using "sigwait" GDB doesn't trap SIGINT. Ctrl+C terminates program when should break gdb.
https://sourceware.org/bugzilla/show_bug.cgi?id=9425
The only way to fix that that I know of (without changing the kernel)
is to make GDB put inferiors in a separate session (create a
pseudo-tty master/slave pair, make the inferior run with the slave as
its terminal, and have gdb pump output/input on the master end).
gdb/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* config.in, configure: Regenerate.
* configure.ac: Check for getpgid.
* go32-nat.c (go32_pass_ctrlc): New.
(go32_target): Install it.
* inf-child.c (inf_child_target): Install
child_terminal_save_inferior, child_pass_ctrlc and
child_interrupt.
* inf-ptrace.c (inf_ptrace_interrupt): Delete.
(inf_ptrace_target): No longer install it.
* infcmd.c (interrupt_target_1): Adjust.
* inferior.h (child_terminal_save_inferior, child_pass_ctrlc)
(child_interrupt): Declare.
(inferior::terminal_state): New.
* inflow.c (struct terminal_info): Update comments.
(inferior_process_group): Delete.
(terminal_is_ours): Delete.
(gdb_tty_state): New.
(child_terminal_init): Adjust.
(is_gdb_terminal, sharing_input_terminal_1)
(sharing_input_terminal): New functions.
(child_terminal_inferior): Adjust. Use sharing_input_terminal.
Set the process's actual process group in the foreground if
possible. Handle is_ours_for_output/is_ours distinction. Don't
mark terminal as the inferior's if not sharing GDB's terminal.
Don't check attach_flag.
(child_terminal_ours_for_output, child_terminal_ours): Adjust to
pass down a target_terminal_state.
(child_terminal_save_inferior): New, factored out from ...
(child_terminal_ours_1): ... this. Handle
target_terminal_state::is_ours_for_output.
(child_interrupt, child_pass_ctrlc): New.
(inflow_inferior_exit): Clear the inferior's terminal_state.
(copy_terminal_info): Copy the inferior's terminal state.
(_initialize_inflow): Remove reference to terminal_is_ours.
* inflow.h (inferior_process_group): Delete.
* nto-procfs.c (nto_handle_sigint, procfs_interrupt): Adjust.
* procfs.c (procfs_target): Don't install procfs_interrupt.
(procfs_interrupt): Delete.
* remote.c (remote_serial_quit_handler): Adjust.
(remote_interrupt): Remove ptid parameter. Adjust.
* target-delegates.c: Regenerate.
* target.c: Include "terminal.h".
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
(target_terminal::init): Adjust.
(target_terminal::inferior): Adjust to per-inferior
terminal_state.
(target_terminal::restore_inferior, target_terminal_is_ours_kind): New.
(target_terminal::ours, target_terminal::ours_for_output): Use
target_terminal_is_ours_kind.
(target_interrupt): Remove ptid parameter. Adjust.
(default_target_pass_ctrlc): Adjust.
* target.h (target_ops::to_terminal_save_inferior): New field.
(target_ops::to_interrupt): Remove ptid_t parameter.
(target_interrupt): Remove ptid_t parameter. Update comment.
(target_pass_ctrlc): Update comment.
* target/target.h (target_terminal_state): New scoped enum,
factored out of ...
(target_terminal::terminal_state): ... here.
(target_terminal::inferior): Update comments.
(target_terminal::restore_inferior): New.
(target_terminal::is_inferior, target_terminal::is_ours)
(target_terminal::is_ours_for_output): Adjust.
(target_terminal::scoped_restore_terminal_state): Adjust to
rename, and call restore_inferior() instead of inferior().
(target_terminal::scoped_restore_terminal_state::m_state): Change
type.
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this and change type.
gdb/gdbserver/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* target.c (target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
gdb/testsuite/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* gdb.base/interrupt-daemon.c: New.
* gdb.base/interrupt-daemon.exp: New.
* gdb.multi/multi-term-settings.c: New.
* gdb.multi/multi-term-settings.exp: New.
|
|
The to_detach target_ops method implementations are currently expected
to work on current_inferior/inferior_ptid. In order to make things more
explicit, and remove some "shadow" parameter passing through globals,
this patch adds an "inferior" parameter to to_detach. Implementations
will be expected to use this instead of relying on the global. However,
to keep things simple, this patch only does the minimum that is
necessary to add the parameter. The following patch gives an example of
how one such implementation would be adapted. If the approach is deemed
good, we can then look into adapting more implementations. Until then,
they'll continue to work as they do currently.
gdb/ChangeLog:
* target.h (struct target_ops) <to_detach>: Add inferior
parameter.
(target_detach): Likewise.
* target.c (dispose_inferior): Pass inferior down.
(target_detach): Pass inferior down. Assert that it is equal to
the current inferior.
* aix-thread.c (aix_thread_detach): Pass inferior down.
* corefile.c (core_file_command): Pass current_inferior() down.
* corelow.c (core_detach): Add inferior parameter.
* darwin-nat.c (darwin_detach): Likewise.
* gnu-nat.c (gnu_detach): Likewise.
* inf-ptrace.c (inf_ptrace_detach): Likewise.
* infcmd.c (detach_command): Pass current_inferior() down to
target_detach.
* infrun.c (follow_fork_inferior): Pass parent_inf to
target_detach.
(handle_vfork_child_exec_or_exit): Pass inf->vfork_parent to
target_detach.
* linux-nat.c (linux_nat_detach): Add inferior parameter.
* linux-thread-db.c (thread_db_detach): Likewise.
* nto-procfs.c (procfs_detach): Likewise.
* procfs.c (procfs_detach): Likewise.
* record.c (record_detach): Likewise.
* record.h (struct inferior): Forward-declare.
(record_detach): Add inferior parameter.
* remote-sim.c (gdbsim_detach): Likewise.
* remote.c (remote_detach_1): Likewise.
(remote_detach): Likewise.
(extended_remote_detach): Likewise.
* sol-thread.c (sol_thread_detach): Likewise.
* target-debug.h (target_debug_print_inferior_p): New macro.
* target-delegates.c: Re-generate.
* top.c (kill_or_detach): Pass inferior down to target_detach.
* windows-nat.c (windows_detach): Add inferior parameter.
|
|
I was looking into adding a parameter to target_detach, and was
wondering what the args parameter was. It seems like in the distant
past, it was possible to specify a signal number when detaching. That
signal was injected in the process before it was detached. There is an
example of code handling this in linux_nat_detach. With today's GDB, I
can't get this to work. Doing "detach 15" (15 == SIGTERM) doesn't work,
because detach is a prefix command and doesn't recognize the sub-command
15. Doing "detach inferiors 15" doesn't work because it expects a list
of inferior id to detach. Therefore, I don't think there's a way of
invoking detach_command with a non-NULL args. I also didn't find any
documentation related to this feature.
I assume that this feature stopped working when detach was made a prefix
command, which is in f73adfeb8bae36885e6ea248d12223ab0d5eb9cb (sorry,
there's no commit title) from 2006. Given that this feature was broken
for such a long time and we haven't heard anything (AFAIK, I did not
find any related bug), I think it's safe to remove it, as well as the
args parameter to target_detach. If someone wants to re-introduce it, I
would suggest rethinking the user interface, and in particular would
suggest using signal name instead of numbers.
I tried to fix all the impacted code, but I might have forgotten some
spots. It shouldn't be hard to fix if that's the case. I also couldn't
build-test everything I changed, especially the nto and solaris stuff.
gdb/ChangeLog:
* target.h (struct target_ops) <to_detach>: Remove args
parameter.
(target_detach): Likewise.
* target.c (dispose_inferior): Adjust.
(target_detach): Remove args parameter, adjust.
* aix-thread.c (aix_thread_detach): Adjust.
* corefile.c (core_file_command): Adjust.
* corelow.c (core_detach): Adjust.
* darwin-nat.c (darwin_detach): Adjust.
* gnu-nat.c (gnu_detach): Adjust.
* inf-ptrace.c (inf_ptrace_detach): Adjust.
* infcmd.c (detach_command): Adjust
* infrun.c (follow_fork_inferior): Adjust.
(handle_vfork_child_exec_or_exit): Adjust.
* linux-fork.c (linux_fork_detach): Remove args parameter.
* linux-fork.h (linux_fork_detach): Likewise.
* linux-nat.c (linux_nat_detach): Likewise, and adjust.
* linux-thread-db.c (thread_db_detach): Likewise.
* nto-procfs.c (procfs_detach): Likewise.
* procfs.c (procfs_detach): Likewise.
(do_detach): Remove signo parameter.
* record.c (record_detach): Remove args parameter.
* record.h (record_detach): Likewise.
* remote-sim.c (gdbsim_detach): Likewise.
* remote.c (remote_detach_1): Likewise.
(remote_detach): Likewise.
(extended_remote_detach): Likewise.
* sol-thread.c (sol_thread_detach): Likewise.
* target-delegates.c: Re-generate.
* top.c (struct qt_args) <args>: Remove field.
(kill_or_detach): Don't pass args.
(quit_force): Don't set args.
* windows-nat.c (windows_detach): Remove args parameter.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
ARMv8 supports tagged address, that is, the top one byte in address
is ignored. It is always enabled on aarch64-linux. See
https://www.kernel.org/doc/Documentation/arm64/tagged-pointers.txt
The tag in the tagged address is modeled as non-significant bits in
address, so this patch adds a new gdbarch method significant_addr_bit and
clear the non-significant bits (the top byte in ARMv8) of the virtual
address at the point before passing address to target cache layer. IOW,
the address used in the target cache layer is already cleared.
Before this patch,
(gdb) x/x 0x0000000000411030
0x411030 <global>: 0x00000000
(gdb) x/x 0xf000000000411030
0xf000000000411030: Cannot access memory at address 0xf000000000411030
After this patch,
(gdb) x/x 0x0000000000411030
0x411030 <global>: 0x00000000
(gdb) x/x 0xf000000000411030
0xf000000000411030: 0x00000000
Note that I used address_significant in paddress, but it causes a
regression gdb.base/long_long.exp, because gdb clears the non-significant
bits in address, but test still expects them.
p/a val.oct^M
$24 = 0x2ee53977053977^M
(gdb) FAIL: gdb.base/long_long.exp: p/a val.oct
so I defer the change there.
gdb:
2017-12-08 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdbarch_init): Install gdbarch
significant_addr_bit.
* gdbarch.sh (significant_addr_bit): New.
* gdbarch.c, gdbarch.h: Re-generated.
* target.c (memory_xfer_partial): Call address_significant.
* utils.c (address_significant): New function.
* utils.h (address_significant): Declare.
2017-12-08 Yao Qi <yao.qi@linaro.org>
gdb/testsuite:
* gdb.arch/aarch64-tagged-pointer.c: New file.
* gdb.arch/aarch64-tagged-pointer.exp: New file.
|
|
This patch removes some unused variables, found with -Wunused. I have
not removed everything reported by -Wunused, because some expressions
such as
struct type *arg_type = check_typedef (value_type);
in bfin-tdep.c could have an unexpected but important side-effect. I
removed others that I considered more low-risk, such as:
struct gdbarch *gdbarch = get_objfile_arch (objfile);
I tested building with Python 2/Python 3/no Python, with/without expat,
with/without libipt and with/without babeltrace.
gdb/ChangeLog:
* ada-lang.c (ada_collect_symbol_completion_matches): Remove
unused variables.
(ada_is_redundant_range_encoding): Likewise.
* ada-varobj.c (ada_varobj_get_value_of_array_variable):
Likewise.
* alpha-tdep.c (alpha_software_single_step): Likewise.
* arm-tdep.c (_initialize_arm_tdep): Likewise.
* auto-load.c (info_auto_load_cmd): Likewise.
* break-catch-syscall.c (insert_catch_syscall): Likewise.
(remove_catch_syscall): Likewise.
* breakpoint.c (condition_completer): Likewise.
(clear_command): Likewise.
(update_breakpoint_locations): Likewise.
* btrace.c (btrace_disable): Likewise.
(btrace_teardown): Likewise.
(btrace_maint_update_pt_packets): Likewise.
(maint_btrace_clear_cmd): Likewise.
* cli/cli-decode.c (lookup_cmd_1): Likewise.
(lookup_cmd_composition): Likewise.
* cli/cli-dump.c (scan_filename): Likewise.
(restore_command): Likewise.
* compile/compile-loc2c.c (compute_stack_depth): Likewise.
* compile/compile-object-load.c (compile_object_load): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* compile/compile.c (compile_to_object): Likewise.
* completer.c (filename_completer): Likewise.
(complete_files_symbols): Likewise.
(complete_expression): Likewise.
* corelow.c (core_open): Likewise.
* ctf.c (ctf_start): Likewise.
(ctf_write_status): Likewise.
(ctf_write_uploaded_tsv): Likewise.
(ctf_write_definition_end): Likewise.
(ctf_open_dir): Likewise.
(ctf_xfer_partial): Likewise.
(ctf_trace_find): Likewise.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Likewise.
* dwarf2loc.c (allocate_piece_closure): Likewise.
(indirect_pieced_value): Likewise.
(dwarf2_evaluate_loc_desc_full): Likewise.
* dwarf2read.c (dw2_expand_marked_cus): Likewise.
(dw2_expand_symtabs_matching): Likewise.
(dw2_map_symbol_filenames): Likewise.
(read_and_check_comp_unit_head): Likewise.
(read_cutu_die_from_dwo): Likewise.
(lookup_dwo_unit): Likewise.
(read_comp_units_from_section): Likewise.
(dwarf2_compute_name): Likewise.
(handle_DW_AT_stmt_list): Likewise.
(create_cus_hash_table): Likewise.
(create_dwp_v2_section): Likewise.
(dwarf2_rnglists_process): Likewise.
(dwarf2_ranges_process): Likewise.
(dwarf2_record_block_ranges): Likewise.
(is_vtable_name): Likewise.
(read_formatted_entries): Likewise.
(skip_form_bytes): Likewise.
* elfread.c (elf_symtab_read): Likewise.
* exec.c (exec_file_command): Likewise.
* f-valprint.c (f_val_print): Likewise.
(info_common_command_for_block): Likewise.
* guile/guile.c (initialize_scheme_side): Likewise.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise.
* guile/scm-cmd.c (cmdscm_completer): Likewise.
(gdbscm_register_command_x): Likewise.
* guile/scm-frame.c (gdbscm_frame_read_var): Likewise.
* guile/scm-param.c (gdbscm_parameter_value): Likewise.
* guile/scm-ports.c (file_port_magic): Likewise.
* guile/scm-pretty-print.c (ppscm_search_pp_list): Likewise.
(ppscm_pretty_print_one_value): Likewise.
(ppscm_print_children): Likewise.
* guile/scm-string.c (gdbscm_string_to_argv): Likewise.
* guile/scm-symtab.c (gdbscm_sal_symtab): Likewise.
* guile/scm-type.c (gdbscm_type_next_field_x): Likewise.
* guile/scm-utils.c (gdbscm_parse_function_args): Likewise.
* i386-tdep.c (i386_register_reggroup_p): Likewise.
* infcmd.c (run_command_1): Likewise.
(until_next_fsm_clean_up): Likewise.
* linespec.c (linespec_complete): Likewise.
(find_label_symbols): Likewise.
* m2-valprint.c (m2_val_print): Likewise.
* memattr.c (require_user_regions): Likewise.
(lookup_mem_region): Likewise.
(disable_mem_command): Likewise.
(mem_delete): Likewise.
* mep-tdep.c (mep_register_name): Likewise.
(mep_analyze_prologue): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Likewise.
* mi/mi-interp.c (mi_on_sync_execution_done): Likewise.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
* microblaze-linux-tdep.c (microblaze_linux_init_abi): Likewise.
* minidebug.c (lzma_open): Likewise.
* minsyms.c (lookup_minimal_symbol): Likewise.
* mips-linux-tdep.c (mips64_fill_fpregset): Likewise.
* mips-tdep.c (mips_stub_frame_sniffer): Likewise.
(mips_o64_return_value): Likewise.
(mips_single_step_through_delay): Likewise.
(_initialize_mips_tdep): Likewise.
* nios2-tdep.c (nios2_push_dummy_call): Likewise.
(nios2_software_single_step): Likewise.
* parse.c (find_minsym_type_and_address): Likewise.
* psymtab.c (psym_relocate): Likewise.
* python/py-breakpoint.c (bppy_get_commands): Likewise.
(gdbpy_breakpoint_modified): Likewise.
* python/py-infevents.c (create_inferior_call_event_object):
Likewise.
* python/py-record-btrace.c (btpy_list_item): Likewise.
* python/py-type.c (typy_str): Likewise.
* python/py-value.c (valpy_call): Likewise.
* python/python.c (do_start_initialization): Likewise.
* record-btrace.c (record_btrace_insn_history_range): Likewise.
(record_btrace_call_history_range): Likewise.
(record_btrace_record_method): Likewise.
(record_btrace_xfer_partial): Likewise.
(btrace_get_frame_function): Likewise.
* record-full.c (record_full_open): Likewise.
* record.c (get_context_size): Likewise.
* registry.h (DEFINE_REGISTRY): Likewise.
* remote-fileio.c (remote_fileio_request): Likewise.
* remote.c (remote_update_thread_list): Likewise.
(remote_check_symbols): Likewise.
(remote_commit_resume): Likewise.
(remote_interrupt): Likewise.
(remote_insert_breakpoint): Likewise.
(compare_sections_command): Likewise.
* rust-exp.y (super_name): Likewise.
(lex_string): Likewise.
(convert_ast_to_type): Likewise.
(convert_ast_to_expression): Likewise.
* rust-lang.c (rust_print_struct_def): Likewise.
(rust_print_type): Likewise.
(rust_evaluate_subexp): Likewise.
* rx-tdep.c (rx_register_type): Likewise.
* ser-event.c (serial_event_clear): Likewise.
* serial.c (serial_open): Likewise.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
* symfile.c (section_is_overlay): Likewise.
(overlay_unmapped_address): Likewise.
(overlay_mapped_address): Likewise.
(simple_overlay_update_1): Likewise.
(simple_overlay_update): Likewise.
* symtab.c (symbol_find_demangled_name): Likewise.
(search_symbols): Likewise.
* target-descriptions.c (tdesc_predefined_type): Likewise.
* target.c (target_commit_resume): Likewise.
* thread.c (print_selected_thread_frame): Likewise.
* top.c (new_ui_command): Likewise.
(gdb_readline_no_editing): Likewise.
* tracefile-tfile.c (tfile_open): Likewise.
* tracepoint.c (create_tsv_from_upload): Likewise.
* utils.c (quit): Likewise.
(defaulted_query): Likewise.
* valarith.c (value_concat): Likewise.
* xml-syscall.c (xml_list_syscalls_by_group): Likewise.
* xml-tdesc.c (target_fetch_description_xml): Likewise.
* xtensa-tdep.c (xtensa_pseudo_register_read): Likewise.
(xtensa_pseudo_register_write): Likewise.
gdb/gdbserver/ChangeLog:
* regcache.c (registers_to_string): Remove unused variable.
|
