| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Implement a "generate-core-file" command in gdb, save target state.
* gcore.c: New file. Implement new command 'generate-core-file'.
Save a corefile image of the current state of the inferior.
* linux-proc.c: Add linux-specific code for saving corefiles.
* target.h (struct target_ops): Add new target vectors for saving
corefiles; to_find_memory_regions and to_make_corefile_notes.
(target_find_memory_regions): New macro.
(target_make_corefile_notes): New macro.
* target.c (update_current_target): Inherit new target methods.
(dummy_find_memory_regions): New place-holder method.
(dummy_make_corefile_notes): New place-holder method.
(init_dummy_target): Initialize new dummy target vectors.
* exec.c (exec_set_find_memory_regions): New function.
Allow the exec_ops vector for memory regions to be taken over.
(exec_make_note_section): New function, target vector method.
* defs.h (exec_set_find_memory_regions): Export prototype.
* procfs.c (proc_find_memory_regions): New function, corefile method.
(procfs_make_note_section): New function, corefile method.
(init_procfs_ops): Set new target vector pointers.
(find_memory_regions_callback): New function.
(procfs_do_thread_registers): New function.
(procfs_corefile_thread_callback): New function.
* sol-thread.c (sol_find_memory_regions): New function.
(sol_make_note_section): New function.
(init_sol_thread_ops): Initialize new target vectors.
* inftarg.c (inftarg_set_find_memory_regions): New function.
Allow to_find_memory_regions vector to be taken over.
(inftarg_set_make_corefile_notes): New function.
Allow to_make_corefile_notes vector to be taken over.
* thread-db.c (thread_db_new_objfile): Don't activate thread-db
interface layer if not target_has_execution (may be a corefile).
* config/i386/linux.mh: Add gcore.o to NATDEPFILES.
* config/sparc/sun4sol2.mh: Ditto.
* config/alpha/alpha-linux.mh: Ditto.
* config/arm/linux.mh: Ditto.
* config/i386/x86-64linux.mh: Ditto.
* config/ia64/linux.mh: Ditto.
* config/m68k/linux.mh: Ditto.
* config/mips/linux.mh: Ditto.
* config/powerpc/linux.mh: Ditto.
* config/sparc/linux.mh: Ditto.
|
|
return_zero.
|
|
* Makefile.in: Add signals.o.
* target.c (struct signals, target_signal_to_name)
(target_signal_from_name, target_signal_from_host)
(do_target_signal_to_host, target_signal_to_host_p)
(target_signal_to_host, target_signal_from_command): Move to
signals.c.
(initialize_targets): Move check of struct signals to...
* signals.c (_initialize_signals): Here.
|
|
* defs.h (enum target_signal): Add TARGET_SIGNAL_REALTIME_65
to TARGET_SIGNAL_REALTIME_127.
* target.c (struct signals): Add SIG63 to SIG127.
(target_signal_from_host): Handle up to 127 signals.
(do_target_signal_to_host): Likewise.
|
|
|
|
* target.c (normal_pid_to_str): Get rid of an ancient hack.
* remote.c (remote_pid_to_str): New function for remote target.
|
|
function.
* corelow.c (core_ops): Updated for above change.
* gnu-nat.c (core_ops): Likewise.
* inftarg.c (child_ops): Likewise.
* monitor.c (monitor_ops): Likewise.
* ppc-bdm.c (bdm_ppc_ops): Likewise.
* remote-adapt.c (adapt_ops): Likewise.
* remote-bug.c (bug_ops): Likewise.
* remote-e7000.c (e7000_ops): Likewise.
* remote-eb.c (eb_ops): Likewise.
* remote-es.c (es1800_ops, es1800_child_ops): Likewise.
* remote-mm.c (mm_ops): Likewise.
* remote-nindy.c (nindy_ops): Likewise.
* remote-nrom.c (nrom_ops): Likewise.
* remote-os9k.c (rombug_ops): Likewise.
* remote-rdp.c (remote_rdp_ops): Likewise.
* remote-sim.c (gdbsim_ops): Likewise.
* remote-st.c (st2000_ops): Likewise.
* v850ice.c (v850ice_ops): Likewise.
* target.c (cleanup_target): Likewise
(update_current_target): Likewise.
(setup_target_debug): Likewise
(debug_to_core_file_to_sym_file): Removed.
* corefile.c (core_file_command) [HPUXHPPA]: Removed code that
sets symbol file from information obtained from the core file.
* corelow.c (core_file_to_sym_file): Removed.
|
|
* symtab.h (decode_line_1): Removed declaration.
* symfile.c (#include <assert.h>): Removed.
* arch-utils.c (#include <ctype.h>): Removed.
* c-typeprint.c: Likewise.
* dbxread.c: Likewise.
* gdbtypes.c: Likewise.
* target.c: Likewise.
* os9kread.c: Likewise.
* c-valprint.c (#include "demangle.h"): Removed.
* ch-typeprint.c: Likewise.
* eval.c: Likewise.
* f-typeprint.c: Likewise.
* f-valprint.c: Likewise.
* m2-typeprint.c: Likewise.
* typeprint.c: Likewise.
* p-typeprint.c: Likewise.
* valarith.c: Likewise.
* valprint.c: Likewise.
* m2-typeprint.c (#include "gdb_string.h"): Removed.
* nlmread.c: Likewise.
* mdebugread.c (#include "gdb-stabs.h"): Removed.
* minsyms.c: Likewise.
* mipsread.c: Likewise.
* nlmread.c: Likewise.
* m2-typeprint.c (#include "obstack.h"): Removed.
* m2-valprint.c: Likewise.
* event-loop.c (#include <setjmp.h>): Removed.
|
|
|
|
|
|
|
|
to invalid access mode attribute.
|
|
* infptrace.c (child_xfer_memory): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
* remote-adapt.c (adapt_xfer_inferior_memory): Likewise.
* remote-array.c (array_xfer_memory): Likewise.
* remote-bug.c (bug_xfer_memory): Likewise.
* remote-e7000.c (e7000_xfer_inferior_memory): Likewise.
* remote-eb.c (eb_xfer_inferior_memory): Likewise.
* remote-es.c (es1800_xfer_inferior_memory): Likewise.
* remote-mips.c (mips_xfer_memory): Likewise.
* remote-mm.c (mm_xfer_inferior_memory): Likewise.
* remote-nindy.c (nindy_xfer_inferior_memory): Likewise.
* remote-os9k.c (rombug_xfer_inferior_memory): Likewise.
* remote-rdi.c (arm_rdi_xfer_memory): Likewise.
* remote-rdp.c (remote_rdp_xfer_inferior_memory): Likewise.
* remote-sds.c (sds_xfer_memory): Likewise.
* remote-sim.c (gdbsim_xfer_inferior_memory): Likewise.
* remote-st.c (st2000_xfer_inferior_memory): Likewise.
* remote-udi.c (udi_xfer_inferior_memory): Likewise.
* remote-vx.c (vx_xfer_memory): Likewise.
* remote.c (remote_xfer_memory): Likewise.
* target.c (debug_to_xfer_memory, do_xfer_memory): Likewise.
* target.h (child_xfer_memory, do_xfer_memory, xfer_memory): Likewise.
* target.h (#include "memattr.h"): Added.
(target_ops.to_xfer_memory): Add attrib argument.
* wince.c (_initialize_inftarg): Removed call to set_dcache_state.
* dcache.h (set_dcache_state): Removed declaration.
* dcache.c (set_dcache_state): Removed definition
* dcache.c: Update module comment, as dcache is now enabled and
disabled with memory region attributes instead of by the global
variable "remotecache". Add comment describing the interaction
between dcache and memory region attributes.
(dcache_xfer_memory): Add comment describing benefits of moving
cache writeback to a higher level.
(dcache_struct): Removed cache_has_stuff field. This was used to
record whether the cache had been accessed in order to invalidate
it when it was disabled. However, this is not needed because the
cache is write through and the code that enables, disables, and
deletes memory regions invalidate the cache. Add comment which
suggests that we could be more selective and only invalidate those
cache lines containing data from those memory regions.
(dcache_invalidate): Updated.
(dcache_xfer_memory): Updated.
(dcache_alloc): Don't abort() if dcache_enabled_p is clear.
(dcache_xfer_memory): Removed code that called do_xfer_memory() to
perform a uncached transfer if dcache_enabled_p was clear. This
function is now only called if caching is enabled for the memory
region.
(dcache_info): Always print cache info.
* target.c (do_xfer_memory): Add attrib argument.
(target_xfer_memory, target_xfer_memory_partial): Break transfer
into chunks defined by memory regions, pass region attributes to
do_xfer_memory().
* dcache.c (dcache_read_line, dcache_write_line): Likewise.
* Makefile.in (SFILES): Add memattr.c.
(COMMON_OBS): Add memattr.o.
(dcache.o): Add target.h to dependencies.
* memattr.c: New file.
* memattr.h: Likewise.
|
|
|
|
* target.c (target_signal_from_host, do_target_signal_to_host):
Handle TARGET_SIGNAL_REALTIME_64.
|
|
* target.c (do_xfer_memory): Only perform a single memory transfer
instead of iterating to tranfer the entire region. Higher layers
are expected to call this function multiple times for partial
transfers.
(target_xfer_memory_partial): Remove unused local variables.
2000-11-10 Nick Duffek <nsd@redhat.com>
* target.c (target_xfer_memory_partial): Return bytes transferred
instead of 0.
|
|
must invalidate the dcache, and how this might be fixed.
* monitor.c (#include "dcache.h"): Removed.
(remote_dcache): Removed.
(monitor_open): Removed code that created local dcache.
(flush_monitor_dcache): Removed (unused function).
(monitor_resume): Removed call to dcache_invd().
(monitor_load): Likewise.
(monitor_xfer_memory): Changed to call monitor_write_memory(),
monitor_write_memory_block(), and monitor_read_memory() instead
of dcache_xfer_memory().
* monitor.h (flush_monitor_dcache): Removed (unused function).
* ocd.c (#include "dcache.h"): Removed.
(ocd_dcache): Removed.
(ocd_open): Removed code that created local dcache.
(ocd_resume): Removed call to dcache_invd().
(ocd_xfer_memory): Changed to call ocd_write_bytes() and
ocd_read_bytes() instead of dcache_xfer_memory().
(bdm_reset_command): Invalidate target dcache.
* remote-bug.c (bug_load): Remove call to dcache_invd().
(bug_resume): Likewise.
(bug_settings): Remove dcache, readfunc, and writefunc fields
from initializer.
(bug_xfer_memory): Changed to call bug_read_memory() and
bug_write_memory() instead of dcache_xfer_memory().
* remote-nindy.c (#include "dcache.h"): Removed.
(nindy_dcache): Removed.
(nindy_open): Removed code that created local dcache.
(nindy_resume): Removed call to dcache_invd().
(nindy_load): Likewise.
(nindy_xfer_inferior_memory): Changed to call ninMemPut() and
ninMemGet() instead of dcache_xfer_memory().
* remote-sds.c (#include "dcache.h"): Removed.
(sds_dcache): Removed.
(sds_open): Removed code that created local dcache.
(sds_resume): Removed call to dcache_invd().
(sds_xfer_memory): Changed to call sds_write_bytes() and
sds_read_bytes() instead of dcache_xfer_memory().
* remote-utils.c (gr_open): Removed code that created local dcache.
* remote-utils.h (#include "dcache.h"): Removed.
(struct gr_settings): Removed dcache, readfunc, and writefunc fields.
(gr_get_dcache, gr_set_dcache): Removed macro definitions.
* remote.c (#include "dcache.h"): Removed.
(remote_dcache): Removed.
(remote_open_1): Removed code that created local dcache.
(remote_async_open_1): Likewise.
(remote_resume): Removed call to dcache_invd().
(remote_async_resume): Likewise.
(remote_xfer_memory): Changed to call remote_write_bytes() and
remote_read_bytes() instead of dcache_xfer_memory().
* wince.c (#include "dcache.h"): Removed.
(remote_dcache): Removed.
(child_create_inferior): Removed code that created local dcache.
(child_xfer_memory): Changed to call remote_write_bytes() and
remote_read_bytes() instead of dcache_xfer_memory().
(child_resume): Removed call to dcache_invd().
* target.c (target_dcache): Added.
(target_load): Invalidate target_dcache.
(do_xfer_memory): New function.
(target_xfer_memory): Reimplement in terms of dcache_xfer_memory().
(target_xfer_memory_partial): Likewise.
(initialize_targets): Create target_dcache.
* target.h (#include "dcache.h"): Added.
(target_open): Invalidate target_dcache.
(target_resume): Likewise.
(do_xfer_memory): New declaration.
* dcache.c (dcache_init): Removed reading and writing arguments.
(dcache_struct): Removed read_memory and write_memory fields.
(dcache_write_line): Call do_xfer_memory.
(dcache_read_line): Likewise.
(dcache_xfer_memory): Likewise.
(dcache_invalidate): Renamed from dcache_invd.
(dcache_init): Updated.
(dcache_xfer_memory): Updated.
* dcache.h (memxferfunc): Removed definition.
|
|
gdbarch.{c,sh} removed a word from a comment.
|
|
* target.c (generic_mourn_inferior): Notify GUI that inferior is gone
by calling detach_hook, if defined.
|
|
Add support for Solaris realtime signals.
|
|
|
|
|
|
|
|
* target.c (target_memory_bfd_section): Removed.
* exec.c (xfer_memory): Removed #if'ed-out code which referenced
target_memory_bfd_section.
* target.h (target_read_memory_section): Removed declaration.
* target.c (target_read_memory_section): Removed.
(target_xfer_memory): Update, removed bfd_section argument.
(target_read_string, target_read_memory, target_write_memory):
Update for above change.
* gdbcore.h (read_memory_section): Removed declaration.
* corefile.c (read_memory_section): Removed.
* jv-lang.c (get_java_utf8_name): Changed calls to
read_memory_section to read_memory.
* printcmd.c (printf_command): Likewise.
* valops.c (value_at, value_fetch_lazy): Likewise.
|
|
|
|
|
|
* solib.c (current_sos): New function, replacing find_solib.
(find_solib): Deleted.
(free_so): New function.
(clear_solib): Call free_so, instead of writing it out.
(solib_add): Rewritten: compare the inferior's current list of
shared objects with GDB's list, and do the required loads and
unloads.
(info_sharedlibrary_command, solib_address): Don't use find_solib
to walk the list of shared libraries: call solib_add, and then
walk the list at so_list_head normally.
* objfiles.c (free_objfile): Don't call CLEAR_SOLIB, and don't
detach the core target. These tasks are taken care of elsewhere.
* target.c (remove_target_sections): New function.
* target.h (remove_target_sections): New declaration.
* solib.c (symbol_add_stub): Check whether we've already created
an objfile for this shared object first, before doing all that
work to compute section addresses, etc.
* objfiles.c (unlink_objfile): Report an internal error if objfile
doesn't occur in the object_files list.
* solib.c (special_symbol_handling): Delete argument; it's not
used.
* solib.c (SOLIB_EXTRACT_ADDRESS): New macro to extract addresses
from solib structures. Use it throughout solib.c, get rid of all
CORE_ADDR casts.
(struct so_list): Change type of lmaddr to CORE_ADDR.
(first_link_map_member): Change return value type to CORE_ADDR,
update callers.
(solib_add_common_symbols): Change parameter type to CORE_ADDR,
update callers.
(open_symbol_file_object, find_solib): Change type of lm variable
to CORE_ADDR.
|
|
* target.c (do_target_signal_to_host): Do not use REALTIME_LO in
the conversion of the signal number. TARGET_SIGNAL_REALTIME_33 is
33 by definition, whereas REALTIME_LO might be 32 on systems that
have SIG32 such as Linux. Make sure that the signal number
returned is within the range specified by REALTIME_LO and
REALTIME_HI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
