| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
|
|
gdb/ChangeLog
* stack.c (return_command): Markup warning message with _.
|
|
Add a flag field is_noreturn to struct func_type. Make calling_convention
a small bit field to not increase the size of the struct. Set is_noreturn
if the new GCC5/DWARF5 DW_AT_noreturn is set on a DW_TAG_subprogram.
Use this information to warn the user before doing a finish or return from
a function that does not return normally to its caller.
(gdb) finish
warning: Function endless does not return normally.
Try to finish anyway? (y or n)
(gdb) return
warning: Function does not return normally to caller.
Make endless return now? (y or n)
gdb/ChangeLog
* dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
DW_AT_noreturn.
* gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
calling_convention an 8 bit bit field.
(TYPE_NO_RETURN): New macro.
* infcmd.c (finish_command): Query if function does not return
normally.
* stack.c (return_command): Likewise.
gdb/testsuite/ChangeLog
* gdb.base/noreturn-return.c: New file.
* gdb.base/noreturn-return.exp: New file.
* gdb.base/noreturn-finish.c: New file.
* gdb.base/noreturn-finish.exp: New file.
include/ChangeLog
* dwarf2.def (DW_AT_noreturn): New DWARF5 attribute.
The dwarf2.h addition and the code to emit the new attribute is already in
the gcc tree.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
Currently "symtabs" in gdb are stored as a single linked list of
struct symtab that contains both symbol symtabs (the blockvectors)
and file symtabs (the linetables).
This has led to confusion, bugs, and performance issues.
This patch is conceptually very simple: split struct symtab into
two pieces: one part containing things common across the entire
compilation unit, and one part containing things specific to each
source file.
Example.
For the case of a program built out of these files:
foo.c
foo1.h
foo2.h
bar.c
foo1.h
bar.h
Today we have a single list of struct symtabs:
objfile -> foo.c -> foo1.h -> foo2.h -> bar.c -> foo1.h -> bar.h -> NULL
where "->" means the "next" pointer in struct symtab.
With this patch, that turns into:
objfile -> foo.c(cu) -> bar.c(cu) -> NULL
| |
v v
foo.c bar.c
| |
v v
foo1.h foo1.h
| |
v v
foo2.h bar.h
| |
v v
NULL NULL
where "foo.c(cu)" and "bar.c(cu)" are struct compunit_symtab objects,
and the files foo.c, etc. are struct symtab objects.
So now, for example, when we want to iterate over all blockvectors
we can now just iterate over the compunit_symtab list.
Plus a lot of the data that was either unused or replicated for each
symtab in a compilation unit now lives in struct compunit_symtab.
E.g., the objfile pointer, the producer string, etc.
I thought of moving "language" out of struct symtab but there is
logic to try to compute the language based on previously seen files,
and I think that's best left as is for now.
With my standard monster benchmark with -readnow (which I can't actually
do, but based on my calculations), whereas today the list requires
77MB to store all the struct symtabs, it now only requires 37MB.
A modest space savings given the gigabytes needed for all the debug info,
etc. Still, it's nice. Plus, whereas today we create a copy of dirname
for each source file symtab in a compilation unit, we now only create one
for the compunit.
So this patch is basically just a data structure reorg,
I don't expect significant performance improvements from it.
Notes:
1) A followup patch can do a similar split for struct partial_symtab.
I have left that until after I get the changes I want in to
better utilize .gdb_index (it may affect how we do partial syms).
2) Another followup patch *could* rename struct symtab.
The term "symtab" is ambiguous and has been a source of confusion.
In this patch I'm leaving it alone, calling it the "historical" name
of "filetabs", which is what they are now: just the file-name + line-table.
gdb/ChangeLog:
Split struct symtab into two: struct symtab and compunit_symtab.
* amd64-tdep.c (amd64_skip_xmm_prologue): Fetch producer from compunit.
* block.c (blockvector_for_pc_sect): Change "struct symtab *" argument
to "struct compunit_symtab *". All callers updated.
(set_block_compunit_symtab): Renamed from set_block_symtab. Change
"struct symtab *" argument to "struct compunit_symtab *".
All callers updated.
(get_block_compunit_symtab): Renamed from get_block_symtab. Change
result to "struct compunit_symtab *". All callers updated.
(find_iterator_compunit_symtab): Renamed from find_iterator_symtab.
Change result to "struct compunit_symtab *". All callers updated.
* block.h (struct global_block) <compunit_symtab>: Renamed from symtab.
hange type to "struct compunit_symtab *". All uses updated.
(struct block_iterator) <d.compunit_symtab>: Renamed from "d.symtab".
Change type to "struct compunit_symtab *". All uses updated.
* buildsym.c (struct buildsym_compunit): New struct.
(subfiles, buildsym_compdir, buildsym_objfile, main_subfile): Delete.
(buildsym_compunit): New static global.
(finish_block_internal): Update to fetch objfile from
buildsym_compunit.
(make_blockvector): Delete objfile argument.
(start_subfile): Rewrite to use buildsym_compunit. Don't initialize
debugformat, producer.
(start_buildsym_compunit): New function.
(free_buildsym_compunit): Renamed from free_subfiles_list.
All callers updated.
(patch_subfile_names): Rewrite to use buildsym_compunit.
(get_compunit_symtab): New function.
(get_macro_table): Delete argument comp_dir. All callers updated.
(start_symtab): Change result to "struct compunit_symtab *".
All callers updated. Create the subfile of the main source file.
(watch_main_source_file_lossage): Rewrite to use buildsym_compunit.
(reset_symtab_globals): Update.
(end_symtab_get_static_block): Update to use buildsym_compunit.
(end_symtab_without_blockvector): Rewrite.
(end_symtab_with_blockvector): Change result to
"struct compunit_symtab *". All callers updated.
Update to use buildsym_compunit. Don't set symtab->dirname,
instead set it in the compunit.
Explicitly make sure main symtab is first in its list.
Set debugformat, producer, blockvector, block_line_section, and
macrotable in the compunit.
(end_symtab_from_static_block): Change result to
"struct compunit_symtab *". All callers updated.
(end_symtab, end_expandable_symtab): Ditto.
(set_missing_symtab): Change symtab argument to
"struct compunit_symtab *". All callers updated.
(augment_type_symtab): Ditto.
(record_debugformat): Update to use buildsym_compunit.
(record_producer): Update to use buildsym_compunit.
* buildsym.h (struct subfile) <dirname>: Delete.
<producer, debugformat>: Delete.
<buildsym_compunit>: New member.
(get_compunit_symtab): Declare.
* dwarf2read.c (struct type_unit_group) <compunit_symtab>: Renamed
from primary_symtab. Change type to "struct compunit_symtab *".
All uses updated.
(dwarf2_start_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dwarf_decode_macros): Delete comp_dir argument. All callers updated.
(struct dwarf2_per_cu_quick_data) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
(dw2_instantiate_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dw2_find_last_source_symtab): Ditto.
(dw2_lookup_symbol): Ditto.
(recursively_find_pc_sect_compunit_symtab): Renamed from
recursively_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(dw2_find_pc_sect_compunit_symtab): Renamed from
dw2_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(get_compunit_symtab): Renamed from get_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(recursively_compute_inclusions): Change type of immediate_parent
argument to "struct compunit_symtab *". All callers updated.
(compute_compunit_symtab_includes): Renamed from
compute_symtab_includes. All callers updated. Rewrite to compute
includes of compunit_symtabs and not symtabs.
(process_full_comp_unit): Update to work with struct compunit_symtab.
(process_full_type_unit): Ditto.
(dwarf_decode_lines_1): Delete argument comp_dir. All callers updated.
(dwarf_decode_lines): Remove special case handling of main subfile.
(macro_start_file): Delete argument comp_dir. All callers updated.
(dwarf_decode_macro_bytes): Ditto.
* guile/scm-block.c (bkscm_print_block_syms_progress_smob): Update to
use struct compunit_symtab.
* i386-tdep.c (i386_skip_prologue): Fetch producer from compunit.
* jit.c (finalize_symtab): Build compunit_symtab.
* jv-lang.c (get_java_class_symtab): Change result to
"struct compunit_symtab *". All callers updated.
* macroscope.c (sal_macro_scope): Fetch macro table from compunit.
* macrotab.c (struct macro_table) <compunit_symtab>: Renamed from
comp_dir. Change type to "struct compunit_symtab *".
All uses updated.
(new_macro_table): Change comp_dir argument to cust,
"struct compunit_symtab *". All callers updated.
* maint.c (struct cmd_stats) <nr_compunit_symtabs>: Renamed from
nr_primary_symtabs. All uses updated.
(count_symtabs_and_blocks): Update to handle compunits.
(report_command_stats): Update output, "primary symtabs" renamed to
"compunits".
* mdebugread.c (new_symtab): Change result to
"struct compunit_symtab *". All callers updated.
(parse_procedure): Change type of search_symtab argument to
"struct compunit_symtab *". All callers updated.
* objfiles.c (objfile_relocate1): Loop over blockvectors in a
separate loop.
* objfiles.h (struct objfile) <compunit_symtabs>: Renamed from
symtabs. Change type to "struct compunit_symtab *". All uses updated.
(ALL_OBJFILE_FILETABS): Renamed from ALL_OBJFILE_SYMTABS.
All uses updated.
(ALL_OBJFILE_COMPUNITS): Renamed from ALL_OBJFILE_PRIMARY_SYMTABS.
All uses updated.
(ALL_FILETABS): Renamed from ALL_SYMTABS. All uses updated.
(ALL_COMPUNITS): Renamed from ALL_PRIMARY_SYMTABS. All uses updated.
* psympriv.h (struct partial_symtab) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
* psymtab.c (psymtab_to_symtab): Change result type to
"struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab_from_partial): Renamed from
find_pc_sect_symtab_from_partial. Change result type to
"struct compunit_symtab *". All callers updated.
(lookup_symbol_aux_psymtabs): Change result type to
"struct compunit_symtab *". All callers updated.
(find_last_source_symtab_from_partial): Ditto.
* python/py-symtab.c (stpy_get_producer): Fetch producer from compunit.
* source.c (forget_cached_source_info_for_objfile): Fetch debugformat
and macro_table from compunit.
* symfile-debug.c (debug_qf_find_last_source_symtab): Change result
type to "struct compunit_symtab *". All callers updated.
(debug_qf_lookup_symbol): Ditto.
(debug_qf_find_pc_sect_compunit_symtab): Renamed from
debug_qf_find_pc_sect_symtab, change result type to
"struct compunit_symtab *". All callers updated.
* symfile.c (allocate_symtab): Delete objfile argument.
New argument cust.
(allocate_compunit_symtab): New function.
(add_compunit_symtab_to_objfile): New function.
* symfile.h (struct quick_symbol_functions) <lookup_symbol>:
Change result type to "struct compunit_symtab *". All uses updated.
<find_pc_sect_compunit_symtab>: Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All uses updated.
* symmisc.c (print_objfile_statistics): Compute blockvector count in
separate loop.
(dump_symtab_1): Update test for primary source symtab.
(maintenance_info_symtabs): Update to handle compunit symtabs.
(maintenance_check_symtabs): Ditto.
* symtab.c (set_primary_symtab): Delete.
(compunit_primary_filetab): New function.
(compunit_language): New function.
(iterate_over_some_symtabs): Change type of arguments "first",
"after_last" to "struct compunit_symtab *". All callers updated.
Update to loop over symtabs in each compunit.
(error_in_psymtab_expansion): Rename symtab argument to cust,
and change type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab): Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_compunit_symtab): Renamed from find_pc_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_line): Only loop over symtabs within selected compunit
instead of all symtabs in the objfile.
* symtab.h (struct symtab) <blockvector>: Moved to compunit_symtab.
<compunit_symtab> New member.
<block_line_section>: Moved to compunit_symtab.
<locations_valid>: Ditto.
<epilogue_unwind_valid>: Ditto.
<macro_table>: Ditto.
<dirname>: Ditto.
<debugformat>: Ditto.
<producer>: Ditto.
<objfile>: Ditto.
<call_site_htab>: Ditto.
<includes>: Ditto.
<user>: Ditto.
<primary>: Delete
(SYMTAB_COMPUNIT): New macro.
(SYMTAB_BLOCKVECTOR): Update definition.
(SYMTAB_OBJFILE): Update definition.
(SYMTAB_DIRNAME): Update definition.
(struct compunit_symtab): New type. Common members among all source
symtabs within a compilation unit moved here. All uses updated.
(COMPUNIT_OBJFILE): New macro.
(COMPUNIT_FILETABS): New macro.
(COMPUNIT_DEBUGFORMAT): New macro.
(COMPUNIT_PRODUCER): New macro.
(COMPUNIT_DIRNAME): New macro.
(COMPUNIT_BLOCKVECTOR): New macro.
(COMPUNIT_BLOCK_LINE_SECTION): New macro.
(COMPUNIT_LOCATIONS_VALID): New macro.
(COMPUNIT_EPILOGUE_UNWIND_VALID): New macro.
(COMPUNIT_CALL_SITE_HTAB): New macro.
(COMPUNIT_MACRO_TABLE): New macro.
(ALL_COMPUNIT_FILETABS): New macro.
(compunit_symtab_ptr): New typedef.
(DEF_VEC_P (compunit_symtab_ptr)): New vector type.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update expected output.
|
|
This patch just renames one function.
Its only caller is in stack.c where we're printing a backtrace
with non-zero info_verbose and we want to make sure all the needed
symtabs are expanded before printing the backtrace
so that debug symbol reading messages don't pollute the backtrace.
I think the new name of the function makes clearer to the reader
what is going on.
gdb/ChangeLog:
* symtab.c (expand_symtab_containing_pc): Renamed from
find_pc_sect_symtab_via_partial. All callers updated.
|
|
defs.h includes utils.h, and utils.h includes exceptions.h. All GDB
.c files include defs.h as their first line, so no file other than
utils.h needs to include exceptions.h. This commit removes all such
inclusions.
gdb/ChangeLog:
* ada-lang.c: Do not include exceptions.h.
* ada-valprint.c: Likewise.
* amd64-tdep.c: Likewise.
* auto-load.c: Likewise.
* block.c: Likewise.
* break-catch-throw.c: Likewise.
* breakpoint.c: Likewise.
* btrace.c: Likewise.
* c-lang.c: Likewise.
* cli/cli-cmds.c: Likewise.
* cli/cli-interp.c: Likewise.
* cli/cli-script.c: Likewise.
* completer.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-support.c: Likewise.
* cp-valprint.c: Likewise.
* darwin-nat.c: Likewise.
* dwarf2-frame-tailcall.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* event-top.c: Likewise.
* f-valprint.c: Likewise.
* frame-unwind.c: Likewise.
* frame.c: Likewise.
* gdbtypes.c: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* guile/scm-auto-load.c: Likewise.
* guile/scm-breakpoint.c: Likewise.
* guile/scm-cmd.c: Likewise.
* guile/scm-frame.c: Likewise.
* guile/scm-lazy-string.c: Likewise.
* guile/scm-param.c: Likewise.
* guile/scm-symbol.c: Likewise.
* guile/scm-type.c: Likewise.
* hppa-hpux-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* inf-loop.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* interps.c: Likewise.
* interps.h: Likewise.
* jit.c: Likewise.
* linespec.c: Likewise.
* linux-nat.c: Likewise.
* linux-thread-db.c: Likewise.
* m32r-rom.c: Likewise.
* main.c: Likewise.
* memory-map.c: Likewise.
* mi/mi-cmd-break.c: Likewise.
* mi/mi-cmd-stack.c: Likewise.
* mi/mi-interp.c: Likewise.
* mi/mi-main.c: Likewise.
* monitor.c: Likewise.
* nto-procfs.c: Likewise.
* objc-lang.c: Likewise.
* p-valprint.c: Likewise.
* parse.c: Likewise.
* ppc-linux-tdep.c: Likewise.
* printcmd.c: Likewise.
* probe.c: Likewise.
* python/py-auto-load.c: Likewise.
* python/py-breakpoint.c: Likewise.
* python/py-cmd.c: Likewise.
* python/py-finishbreakpoint.c: Likewise.
* python/py-frame.c: Likewise.
* python/py-framefilter.c: Likewise.
* python/py-function.c: Likewise.
* python/py-gdb-readline.c: Likewise.
* python/py-inferior.c: Likewise.
* python/py-infthread.c: Likewise.
* python/py-lazy-string.c: Likewise.
* python/py-linetable.c: Likewise.
* python/py-param.c: Likewise.
* python/py-prettyprint.c: Likewise.
* python/py-symbol.c: Likewise.
* python/py-type.c: Likewise.
* python/py-value.c: Likewise.
* python/python-internal.h: Likewise.
* python/python.c: Likewise.
* record-btrace.c: Likewise.
* record-full.c: Likewise.
* regcache.c: Likewise.
* remote-fileio.c: Likewise.
* remote-mips.c: Likewise.
* remote.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* rs6000-nat.c: Likewise.
* skip.c: Likewise.
* solib-darwin.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-frv.c: Likewise.
* solib-ia64-hpux.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* solib.c: Likewise.
* spu-tdep.c: Likewise.
* stack.c: Likewise.
* stap-probe.c: Likewise.
* symfile-mem.c: Likewise.
* symmisc.c: Likewise.
* target.c: Likewise.
* thread.c: Likewise.
* top.c: Likewise.
* tracepoint.c: Likewise.
* tui/tui-interp.c: Likewise.
* typeprint.c: Likewise.
* utils.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* windows-nat.c: Likewise.
* xml-support.c: Likewise.
|
|
This fixes PR symtab/14604, PR symtab/14605, and Jan's test at
https://sourceware.org/ml/gdb-patches/2014-07/msg00158.html, in a tree
with bddbbed reverted:
2014-07-22 Pedro Alves <palves@redhat.com>
* value.c (allocate_optimized_out_value): Don't mark value as
non-lazy.
The PRs are about variables described by the DWARF as being split over
multiple registers using DWARF piece information, but some of those
registers being marked as optimised out (not saved) by a later frame.
GDB currently incorrectly mishandles these partially-optimized-out
values.
Even though we can usually tell from the debug info whether a local or
global is optimized out, handling the case of a local living in a
register that was not saved in a frame requires fetching the variable.
GDB also needs to fetch a value to tell whether parts of it are
"<unavailable>". Given this, it's not worth it to try to avoid
fetching lazy optimized-out values based on debug info alone.
So this patch makes GDB track which chunks of a value's contents are
optimized out like it tracks <unavailable> contents. That is, it
makes value->optimized_out be a bit range vector instead of a boolean,
and removes the struct lval_funcs check_validity and check_any_valid
hooks.
Unlike Andrew's series which this is based on (at
https://sourceware.org/ml/gdb-patches/2013-08/msg00300.html, note some
pieces have gone in since), this doesn't merge optimized out and
unavailable contents validity/availability behind a single interface,
nor does it merge the bit range vectors themselves (at least yet).
While it may be desirable to have a single entry point that returns
existence of contents irrespective of what may make them
invalid/unavailable, several places want to treat optimized out /
unavailable / etc. differently, so each spot that potentially could
use it will need to be careful considered on case-by-case basis, and
best done as a separate change.
This fixes Jan's test, because value_available_contents_eq wasn't
considering optimized out value contents. It does now, and because of
that it's been renamed to value_contents_eq.
A new intro comment is added to value.h describing "<optimized out>",
"<not saved>" and "<unavailable>" values.
gdb/
PR symtab/14604
PR symtab/14605
* ada-lang.c (coerce_unspec_val_to_type): Use
value_contents_copy_raw.
* ada-valprint.c (val_print_packed_array_elements): Adjust.
* c-valprint.c (c_val_print): Use value_bits_any_optimized_out.
* cp-valprint.c (cp_print_value_fields): Let the common printing
code handle optimized out values.
(cp_print_value_fields_rtti): Use value_bits_any_optimized_out.
* d-valprint.c (dynamic_array_type): Use
value_bits_any_optimized_out.
* dwarf2loc.c (entry_data_value_funcs): Remove check_validity and
check_any_valid fields.
(check_pieced_value_bits): Delete and inline ...
(check_pieced_synthetic_pointer): ... here.
(check_pieced_value_validity): Delete.
(check_pieced_value_invalid): Delete.
(pieced_value_funcs): Remove check_validity and check_any_valid
fields.
(read_pieced_value): Use mark_value_bits_optimized_out.
(write_pieced_value): Switch to use
mark_value_bytes_optimized_out.
(dwarf2_evaluate_loc_desc_full): Copy the value contents instead
of assuming the whole value is optimized out.
* findvar.c (read_frame_register_value): Remove special handling
of optimized out registers.
(value_from_register): Use mark_value_bytes_optimized_out.
* frame-unwind.c (frame_unwind_got_optimized): Use
mark_value_bytes_optimized_out.
* jv-valprint.c (java_value_print): Adjust.
(java_print_value_fields): Let the common printing code handle
optimized out values.
* mips-tdep.c (mips_print_register): Remove special handling of
optimized out registers.
* opencl-lang.c (lval_func_check_validity): Delete.
(lval_func_check_any_valid): Delete.
(opencl_value_funcs): Remove check_validity and check_any_valid
fields.
* p-valprint.c (pascal_object_print_value_fields): Let the common
printing code handle optimized out values.
* stack.c (read_frame_arg): Remove special handling of optimized
out values. Fetch both VAL and ENTRYVAL before comparing
contents. Adjust to value_available_contents_eq rename.
* valprint.c (valprint_check_validity)
(val_print_scalar_formatted): Use value_bits_any_optimized_out.
(val_print_array_elements): Adjust.
* value.c (struct value) <optimized_out>: Now a VEC(range_s).
(value_bits_any_optimized_out): New function.
(value_entirely_covered_by_range_vector): New function, factored
out from value_entirely_unavailable.
(value_entirely_unavailable): Reimplement.
(value_entirely_optimized_out): New function.
(insert_into_bit_range_vector): New function, factored out from
mark_value_bits_unavailable.
(mark_value_bits_unavailable): Reimplement.
(struct ranges_and_idx): New struct.
(find_first_range_overlap_and_match): New function, factored out
from value_available_contents_bits_eq.
(value_available_contents_bits_eq): Rename to ...
(value_contents_bits_eq): ... this. Check both unavailable
contents and optimized out contents.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this.
(allocate_value_lazy): Remove reference to the old optimized_out
boolean.
(allocate_optimized_out_value): Use
mark_value_bytes_optimized_out.
(require_not_optimized_out): Adjust to check whether the
optimized_out vec is empty.
(ranges_copy_adjusted): New function, factored out from
value_contents_copy_raw.
(value_contents_copy_raw): Also copy the optimized out ranges.
Assert the destination ranges aren't optimized out.
(value_contents_copy): Update comment, remove call to
require_not_optimized_out.
(value_contents_equal): Adjust to check whether the optimized_out
vec is empty.
(set_value_optimized_out, value_optimized_out_const): Delete.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New functions.
(value_entirely_optimized_out, value_bits_valid): Delete.
(value_copy): Take a VEC copy of the 'optimized_out' field.
(value_primitive_field): Remove special handling of optimized out.
(value_fetch_lazy): Assert that lazy values have no unavailable
regions. Use value_bits_any_optimized_out. Remove some special
handling for optimized out values.
* value.h: Add intro comment about <optimized out> and
<unavailable>.
(struct lval_funcs): Remove check_validity and check_any_valid
fields.
(set_value_optimized_out, value_optimized_out_const): Remove.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New declarations.
(value_bits_any_optimized_out): New declaration.
(value_bits_valid): Delete declaration.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this, and extend comments.
gdb/testsuite/
PR symtab/14604
PR symtab/14605
* gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
gdb_test.
|
|
This commit includes string.h in common-defs.h and removes all other
inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include string.h.
* aarch64-tdep.c: Do not include string.h.
* ada-exp.y: Likewise.
* ada-lang.c: Likewise.
* ada-lex.l: Likewise.
* ada-typeprint.c: Likewise.
* ada-valprint.c: Likewise.
* aix-thread.c: Likewise.
* alpha-linux-tdep.c: Likewise.
* alpha-mdebug-tdep.c: Likewise.
* alpha-nat.c: Likewise.
* alpha-osf1-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* alphanbsd-tdep.c: Likewise.
* amd64-dicos-tdep.c: Likewise.
* amd64-linux-tdep.c: Likewise.
* amd64-nat.c: Likewise.
* amd64-sol2-tdep.c: Likewise.
* amd64fbsd-tdep.c: Likewise.
* amd64obsd-tdep.c: Likewise.
* arch-utils.c: Likewise.
* arm-linux-nat.c: Likewise.
* arm-linux-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* arm-wince-tdep.c: Likewise.
* armbsd-tdep.c: Likewise.
* armnbsd-nat.c: Likewise.
* armnbsd-tdep.c: Likewise.
* armobsd-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* ax-gdb.c: Likewise.
* ax-general.c: Likewise.
* bcache.c: Likewise.
* bfin-tdep.c: Likewise.
* breakpoint.c: Likewise.
* build-id.c: Likewise.
* buildsym.c: Likewise.
* c-exp.y: Likewise.
* c-lang.c: Likewise.
* c-typeprint.c: Likewise.
* c-valprint.c: Likewise.
* charset.c: Likewise.
* cli-out.c: Likewise.
* cli/cli-cmds.c: Likewise.
* cli/cli-decode.c: Likewise.
* cli/cli-dump.c: Likewise.
* cli/cli-interp.c: Likewise.
* cli/cli-logging.c: Likewise.
* cli/cli-script.c: Likewise.
* cli/cli-setshow.c: Likewise.
* cli/cli-utils.c: Likewise.
* coffread.c: Likewise.
* common/agent.c: Likewise.
* common/buffer.c: Likewise.
* common/buffer.h: Likewise.
* common/common-utils.c: Likewise.
* common/filestuff.c: Likewise.
* common/filestuff.c: Likewise.
* common/format.c: Likewise.
* common/print-utils.c: Likewise.
* common/rsp-low.c: Likewise.
* common/signals.c: Likewise.
* common/vec.h: Likewise.
* common/xml-utils.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-name-parser.y: Likewise.
* cp-support.c: Likewise.
* cp-valprint.c: Likewise.
* cris-tdep.c: Likewise.
* d-exp.y: Likewise.
* darwin-nat.c: Likewise.
* dbxread.c: Likewise.
* dcache.c: Likewise.
* demangle.c: Likewise.
* dicos-tdep.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dsrec.c: Likewise.
* dummy-frame.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* elfread.c: Likewise.
* environ.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* exceptions.c: Likewise.
* exec.c: Likewise.
* expprint.c: Likewise.
* f-exp.y: Likewise.
* f-lang.c: Likewise.
* f-typeprint.c: Likewise.
* f-valprint.c: Likewise.
* fbsd-nat.c: Likewise.
* findcmd.c: Likewise.
* findvar.c: Likewise.
* fork-child.c: Likewise.
* frame.c: Likewise.
* frv-linux-tdep.c: Likewise.
* frv-tdep.c: Likewise.
* gdb.c: Likewise.
* gdb_bfd.c: Likewise.
* gdbarch.c: Likewise.
* gdbarch.sh: Likewise.
* gdbtypes.c: Likewise.
* gnu-nat.c: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-exp.y: Likewise.
* go-lang.c: Likewise.
* go32-nat.c: Likewise.
* guile/guile.c: Likewise.
* guile/scm-auto-load.c: Likewise.
* hppa-hpux-tdep.c: Likewise.
* hppa-linux-nat.c: Likewise.
* hppanbsd-tdep.c: Likewise.
* hppaobsd-tdep.c: Likewise.
* i386-cygwin-tdep.c: Likewise.
* i386-dicos-tdep.c: Likewise.
* i386-linux-tdep.c: Likewise.
* i386-nto-tdep.c: Likewise.
* i386-sol2-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* i386bsd-tdep.c: Likewise.
* i386gnu-nat.c: Likewise.
* i386nbsd-tdep.c: Likewise.
* i386obsd-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* ia64-libunwind-tdep.c: Likewise.
* ia64-linux-nat.c: Likewise.
* inf-child.c: Likewise.
* inf-ptrace.c: Likewise.
* inf-ttrace.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* inflow.c: Likewise.
* infrun.c: Likewise.
* interps.c: Likewise.
* iq2000-tdep.c: Likewise.
* irix5-nat.c: Likewise.
* jv-exp.y: Likewise.
* jv-lang.c: Likewise.
* jv-typeprint.c: Likewise.
* jv-valprint.c: Likewise.
* language.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Likewise.
* lm32-tdep.c: Likewise.
* m2-exp.y: Likewise.
* m2-typeprint.c: Likewise.
* m32c-tdep.c: Likewise.
* m32r-linux-nat.c: Likewise.
* m32r-linux-tdep.c: Likewise.
* m32r-rom.c: Likewise.
* m32r-tdep.c: Likewise.
* m68hc11-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m68kbsd-tdep.c: Likewise.
* m68klinux-nat.c: Likewise.
* m68klinux-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* machoread.c: Likewise.
* macrocmd.c: Likewise.
* main.c: Likewise.
* mdebugread.c: Likewise.
* mem-break.c: Likewise.
* memattr.c: Likewise.
* memory-map.c: Likewise.
* mep-tdep.c: Likewise.
* mi/mi-cmd-break.c: Likewise.
* mi/mi-cmd-disas.c: Likewise.
* mi/mi-cmd-env.c: Likewise.
* mi/mi-cmd-stack.c: Likewise.
* mi/mi-cmd-var.c: Likewise.
* mi/mi-cmds.c: Likewise.
* mi/mi-console.c: Likewise.
* mi/mi-getopt.c: Likewise.
* mi/mi-interp.c: Likewise.
* mi/mi-main.c: Likewise.
* mi/mi-parse.c: Likewise.
* microblaze-rom.c: Likewise.
* microblaze-tdep.c: Likewise.
* mingw-hdep.c: Likewise.
* minidebug.c: Likewise.
* minsyms.c: Likewise.
* mips-irix-tdep.c: Likewise.
* mips-linux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* mips64obsd-tdep.c: Likewise.
* mipsnbsd-tdep.c: Likewise.
* mipsread.c: Likewise.
* mn10300-linux-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* monitor.c: Likewise.
* moxie-tdep.c: Likewise.
* mt-tdep.c: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-procfs.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/linux-waitpid.c: Likewise.
* nbsd-tdep.c: Likewise.
* nios2-linux-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* nto-tdep.c: Likewise.
* objc-lang.c: Likewise.
* objfiles.c: Likewise.
* opencl-lang.c: Likewise.
* osabi.c: Likewise.
* osdata.c: Likewise.
* p-exp.y: Likewise.
* p-lang.c: Likewise.
* p-typeprint.c: Likewise.
* parse.c: Likewise.
* posix-hdep.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* ppcfbsd-tdep.c: Likewise.
* ppcnbsd-tdep.c: Likewise.
* ppcobsd-tdep.c: Likewise.
* printcmd.c: Likewise.
* procfs.c: Likewise.
* prologue-value.c: Likewise.
* python/py-auto-load.c: Likewise.
* python/py-gdb-readline.c: Likewise.
* ravenscar-thread.c: Likewise.
* regcache.c: Likewise.
* registry.c: Likewise.
* remote-fileio.c: Likewise.
* remote-m32r-sdi.c: Likewise.
* remote-mips.c: Likewise.
* remote-notif.c: Likewise.
* remote-sim.c: Likewise.
* remote.c: Likewise.
* reverse.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* ser-base.c: Likewise.
* ser-go32.c: Likewise.
* ser-mingw.c: Likewise.
* ser-pipe.c: Likewise.
* ser-tcp.c: Likewise.
* ser-unix.c: Likewise.
* serial.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* shnbsd-tdep.c: Likewise.
* skip.c: Likewise.
* sol-thread.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-frv.c: Likewise.
* solib-osf.c: Likewise.
* solib-som.c: Likewise.
* solib-spu.c: Likewise.
* solib-target.c: Likewise.
* solib.c: Likewise.
* somread.c: Likewise.
* source.c: Likewise.
* sparc-nat.c: Likewise.
* sparc-sol2-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* sparc64fbsd-tdep.c: Likewise.
* sparc64nbsd-tdep.c: Likewise.
* sparcnbsd-tdep.c: Likewise.
* spu-linux-nat.c: Likewise.
* spu-multiarch.c: Likewise.
* spu-tdep.c: Likewise.
* stabsread.c: Likewise.
* stack.c: Likewise.
* std-regs.c: Likewise.
* symfile.c: Likewise.
* symmisc.c: Likewise.
* symtab.c: Likewise.
* target.c: Likewise.
* thread.c: Likewise.
* tilegx-linux-nat.c: Likewise.
* tilegx-tdep.c: Likewise.
* top.c: Likewise.
* tracepoint.c: Likewise.
* tui/tui-command.c: Likewise.
* tui/tui-data.c: Likewise.
* tui/tui-disasm.c: Likewise.
* tui/tui-file.c: Likewise.
* tui/tui-layout.c: Likewise.
* tui/tui-out.c: Likewise.
* tui/tui-regs.c: Likewise.
* tui/tui-source.c: Likewise.
* tui/tui-stack.c: Likewise.
* tui/tui-win.c: Likewise.
* tui/tui-windata.c: Likewise.
* tui/tui-winsource.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* ui-out.c: Likewise.
* user-regs.c: Likewise.
* utils.c: Likewise.
* v850-tdep.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* vax-tdep.c: Likewise.
* vaxnbsd-tdep.c: Likewise.
* vaxobsd-tdep.c: Likewise.
* windows-nat.c: Likewise.
* xcoffread.c: Likewise.
* xml-support.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-linux-nat.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include string.h.
* event-loop.c: Likewise.
* linux-low.c: Likewise.
* regcache.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
|
|
This commit includes gdb_assert.h in common-defs.h and removes all
other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include gdb_assert.h.
* aarch64-tdep.c: Do not include gdb_assert.h.
* addrmap.c: Likewise.
* aix-thread.c: Likewise.
* alpha-linux-tdep.c: Likewise.
* alpha-mdebug-tdep.c: Likewise.
* alphanbsd-tdep.c: Likewise.
* amd64-nat.c: Likewise.
* amd64-tdep.c: Likewise.
* amd64bsd-nat.c: Likewise.
* amd64fbsd-nat.c: Likewise.
* amd64fbsd-tdep.c: Likewise.
* amd64nbsd-nat.c: Likewise.
* amd64nbsd-tdep.c: Likewise.
* amd64obsd-nat.c: Likewise.
* amd64obsd-tdep.c: Likewise.
* arch-utils.c: Likewise.
* arm-tdep.c: Likewise.
* armbsd-tdep.c: Likewise.
* auxv.c: Likewise.
* bcache.c: Likewise.
* bfin-tdep.c: Likewise.
* blockframe.c: Likewise.
* breakpoint.c: Likewise.
* bsd-kvm.c: Likewise.
* bsd-uthread.c: Likewise.
* buildsym.c: Likewise.
* c-exp.y: Likewise.
* c-lang.c: Likewise.
* charset.c: Likewise.
* cleanups.c: Likewise.
* cli-out.c: Likewise.
* cli/cli-decode.c: Likewise.
* cli/cli-dump.c: Likewise.
* cli/cli-logging.c: Likewise.
* cli/cli-script.c: Likewise.
* cli/cli-utils.c: Likewise.
* coffread.c: Likewise.
* common/common-utils.c: Likewise.
* common/queue.h: Likewise.
* common/signals.c: Likewise.
* common/vec.h: Likewise.
* complaints.c: Likewise.
* completer.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-name-parser.y: Likewise.
* cp-namespace.c: Likewise.
* cp-support.c: Likewise.
* cris-tdep.c: Likewise.
* dbxread.c: Likewise.
* dictionary.c: Likewise.
* doublest.c: Likewise.
* dsrec.c: Likewise.
* dummy-frame.c: Likewise.
* dwarf2-frame-tailcall.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2expr.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* exceptions.c: Likewise.
* expprint.c: Likewise.
* f-valprint.c: Likewise.
* fbsd-nat.c: Likewise.
* findvar.c: Likewise.
* frame-unwind.c: Likewise.
* frame.c: Likewise.
* frv-tdep.c: Likewise.
* gcore.c: Likewise.
* gdb-dlfcn.c: Likewise.
* gdb_bfd.c: Likewise.
* gdbarch.c: Likewise.
* gdbarch.sh: Likewise.
* gdbtypes.c: Likewise.
* gnu-nat.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-lang.c: Likewise.
* guile/scm-exception.c: Likewise.
* guile/scm-gsmob.c: Likewise.
* guile/scm-lazy-string.c: Likewise.
* guile/scm-math.c: Likewise.
* guile/scm-pretty-print.c: Likewise.
* guile/scm-safe-call.c: Likewise.
* guile/scm-utils.c: Likewise.
* guile/scm-value.c: Likewise.
* h8300-tdep.c: Likewise.
* hppa-hpux-nat.c: Likewise.
* hppa-tdep.c: Likewise.
* hppanbsd-tdep.c: Likewise.
* hppaobsd-tdep.c: Likewise.
* i386-darwin-nat.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i386-nto-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* i386bsd-nat.c: Likewise.
* i386fbsd-tdep.c: Likewise.
* i386gnu-nat.c: Likewise.
* i386nbsd-tdep.c: Likewise.
* i386obsd-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* ia64-libunwind-tdep.c: Likewise.
* ia64-tdep.c: Likewise.
* inf-ptrace.c: Likewise.
* inf-ttrace.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* inline-frame.c: Likewise.
* interps.c: Likewise.
* jv-lang.c: Likewise.
* jv-typeprint.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Likewise.
* linux-thread-db.c: Likewise.
* m32c-tdep.c: Likewise.
* m32r-linux-nat.c: Likewise.
* m32r-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m68kbsd-nat.c: Likewise.
* m68kbsd-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* machoread.c: Likewise.
* macroexp.c: Likewise.
* macrotab.c: Likewise.
* maint.c: Likewise.
* mdebugread.c: Likewise.
* memory-map.c: Likewise.
* mep-tdep.c: Likewise.
* mi/mi-common.c: Likewise.
* microblaze-tdep.c: Likewise.
* mingw-hdep.c: Likewise.
* mips-linux-nat.c: Likewise.
* mips-linux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* mips64obsd-tdep.c: Likewise.
* mipsnbsd-tdep.c: Likewise.
* mn10300-linux-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* moxie-tdep.c: Likewise.
* mt-tdep.c: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/mips-linux-watch.c: Likewise.
* nios2-linux-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* objc-lang.c: Likewise.
* objfiles.c: Likewise.
* obsd-nat.c: Likewise.
* opencl-lang.c: Likewise.
* osabi.c: Likewise.
* parse.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* ppcfbsd-nat.c: Likewise.
* ppcfbsd-tdep.c: Likewise.
* ppcnbsd-nat.c: Likewise.
* ppcnbsd-tdep.c: Likewise.
* ppcobsd-nat.c: Likewise.
* ppcobsd-tdep.c: Likewise.
* printcmd.c: Likewise.
* procfs.c: Likewise.
* prologue-value.c: Likewise.
* psymtab.c: Likewise.
* python/py-lazy-string.c: Likewise.
* python/py-value.c: Likewise.
* regcache.c: Likewise.
* reggroups.c: Likewise.
* registry.c: Likewise.
* remote-sim.c: Likewise.
* remote.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* rs6000-tdep.c: Likewise.
* s390-linux-tdep.c: Likewise.
* score-tdep.c: Likewise.
* ser-base.c: Likewise.
* ser-mingw.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* solib-darwin.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* source.c: Likewise.
* sparc-nat.c: Likewise.
* sparc-sol2-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-sol2-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* sparc64fbsd-tdep.c: Likewise.
* sparc64nbsd-tdep.c: Likewise.
* sparc64obsd-tdep.c: Likewise.
* sparcnbsd-tdep.c: Likewise.
* sparcobsd-tdep.c: Likewise.
* spu-multiarch.c: Likewise.
* spu-tdep.c: Likewise.
* stabsread.c: Likewise.
* stack.c: Likewise.
* symfile.c: Likewise.
* symtab.c: Likewise.
* target-descriptions.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* tic6x-linux-tdep.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-linux-nat.c: Likewise.
* tilegx-tdep.c: Likewise.
* top.c: Likewise.
* tramp-frame.c: Likewise.
* tui/tui-out.c: Likewise.
* tui/tui-winsource.c: Likewise.
* ui-out.c: Likewise.
* user-regs.c: Likewise.
* utils.c: Likewise.
* v850-tdep.c: Likewise.
* valops.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* vax-nat.c: Likewise.
* xml-syscall.c: Likewise.
* xml-tdesc.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-linux-nat.c: Likewise.
* xtensa-tdep.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include gdb_assert.h.
|
|
This constifies a couple of functions in stack.c.
2014-07-24 Tom Tromey <tromey@redhat.com>
* stack.c (up_silently_base, down_silently_base): Make argument
const.
|
|
gdb/
2014-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* stack.c (read_frame_arg): Verify value_optimized_out before calling
value_available_contents_eq.
gdb/testsuite/
2014-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/amd64-entry-value-paramref.S: New file.
* gdb.arch/amd64-entry-value-paramref.cc: New file.
* gdb.arch/amd64-entry-value-paramref.exp: New file.
* gdb.arch/amd64-optimout-repeat.S: New file.
* gdb.arch/amd64-optimout-repeat.c: New file.
* gdb.arch/amd64-optimout-repeat.exp: New file.
Message-ID: <20140720150727.GA18488@host2.jankratochvil.net>
Message-ID: <20140711153757.GA452@host2.jankratochvil.net>
|
|
This makes some spots in gdb, particularly general_symbol_info, use a
"const struct block", then fixes the fallout.
The justification is that, ordinarily, blocks ought to be readonly.
Note though that we can't add "const" in the blockvector due to block
relocation. This can be done once blocks are made independent of the
program space.
2014-06-18 Tom Tromey <tromey@redhat.com>
* varobj.c (varobj_create): Update.
* valops.c (value_of_this): Update.
* tracepoint.c (add_local_symbols, scope_info): Update.
* symtab.h (struct general_symbol_info) <block>: Now const.
* symtab.c (skip_prologue_sal)
(default_make_symbol_completion_list_break_on)
(skip_prologue_using_sal): Update.
* stack.h (iterate_over_block_locals)
(iterate_over_block_local_vars): Update.
* stack.c (print_frame_args): Update.
(iterate_over_block_locals, iterate_over_block_local_vars): Make
parameter const.
(get_selected_block): Make return type const.
* python/py-frame.c (frapy_block): Update.
* python/py-block.c (gdbpy_block_for_pc): Update.
* p-exp.y (%union) <bval>: Now const.
* mi/mi-cmd-stack.c (list_args_or_locals): Update.
* mdebugread.c (mylookup_symbol, parse_procedure): Update.
* m2-exp.y (%union) <bval>: Now const.
* linespec.c (get_current_search_block): Make return type const.
(create_sals_line_offset, find_label_symbols): Update.
* inline-frame.c (inline_frame_sniffer, skip_inline_frames):
Update.
(block_starting_point_at): Make "block" const.
* infrun.c (insert_exception_resume_breakpoint): Make "b" const.
(check_exception_resume): Update.
* guile/scm-frame.c (gdbscm_frame_block): Update.
* guile/scm-block.c (gdbscm_lookup_block): Update.
* frame.h (get_frame_block): Update.
(get_selected_block): Make return type const.
* frame.c (frame_id_inner): Update.
* f-valprint.c (info_common_command_for_block)
(info_common_command): Update.
* dwarf2loc.c (dwarf2_find_location_expression)
(dwarf_expr_frame_base, dwarf2_compile_expr_to_ax)
(locexpr_describe_location_piece): Update.
* c-exp.y (%union) <bval>: Now const.
* breakpoint.c (resolve_sal_pc): Update.
* blockframe.c (get_frame_block):Make return type const.
(get_pc_function_start, get_frame_function, find_pc_sect_function)
(block_innermost_frame): Update.
* block.h (blockvector_for_pc, blockvector_for_pc_sect)
(block_for_pc, block_for_pc_sect): Update.
* block.c (blockvector_for_pc_sect, blockvector_for_pc): Make
'pblock' const.
(block_for_pc_sect, block_for_pc): Make return type const.
* ax-gdb.c (gen_expr): Update.
* alpha-mdebug-tdep.c (find_proc_desc): Update.
* ada-lang.c (ada_read_renaming_var_value): Make 'block' const.
(ada_make_symbol_completion_list, ada_add_exceptions_from_frame)
(ada_read_var_value): Update.
* ada-exp.y (struct name_info) <block>: Now const.
(%union): Likewise.
(block_lookup): Constify.
|
|
https://sourceware.org/ml/gdb-patches/2014-05/msg00737.html
Currently a MEMORY_ERROR raised during unwinding a frame will cause the
unwind to stop with an error message, for example:
(gdb) bt
#0 breakpt () at amd64-invalid-stack-middle.c:27
#1 0x00000000004008f0 in func5 () at amd64-invalid-stack-middle.c:32
#2 0x0000000000400900 in func4 () at amd64-invalid-stack-middle.c:38
#3 0x0000000000400910 in func3 () at amd64-invalid-stack-middle.c:44
#4 0x0000000000400928 in func2 () at amd64-invalid-stack-middle.c:50
Cannot access memory at address 0x2aaaaaab0000
However, frame #4 is marked as being the end of the stack unwind, so a
subsequent request for the backtrace looses the error message, such as:
(gdb) bt
#0 breakpt () at amd64-invalid-stack-middle.c:27
#1 0x00000000004008f0 in func5 () at amd64-invalid-stack-middle.c:32
#2 0x0000000000400900 in func4 () at amd64-invalid-stack-middle.c:38
#3 0x0000000000400910 in func3 () at amd64-invalid-stack-middle.c:44
#4 0x0000000000400928 in func2 () at amd64-invalid-stack-middle.c:50
When fetching the backtrace, or requesting the stack depth using the MI
interface the situation is even worse, the first time a request is made
we encounter the memory error and so the MI returns an error instead of
the correct result, for example:
(gdb) -stack-info-depth
^error,msg="Cannot access memory at address 0x2aaaaaab0000"
Or,
(gdb) -stack-list-frames
^error,msg="Cannot access memory at address 0x2aaaaaab0000"
However, once one of these commands has been used gdb has, internally,
walked the stack and figured that out that frame #4 is the bottom of the
stack, so the second time an MI command is tried you'll get the "expected"
result:
(gdb) -stack-info-depth
^done,depth="5"
Or,
(gdb) -stack-list-frames
^done,stack=[frame={level="0", .. snip lots .. }]
After this patch the MEMORY_ERROR encountered during the frame unwind is
attached to frame #4 as the stop reason, and is displayed in the CLI each
time the backtrace is requested. In the MI, catching the error means that
the "expected" result is returned the first time the MI command is issued.
So, from the CLI the results of the backtrace will be:
(gdb) bt
#0 breakpt () at amd64-invalid-stack-middle.c:27
#1 0x00000000004008f0 in func5 () at amd64-invalid-stack-middle.c:32
#2 0x0000000000400900 in func4 () at amd64-invalid-stack-middle.c:38
#3 0x0000000000400910 in func3 () at amd64-invalid-stack-middle.c:44
#4 0x0000000000400928 in func2 () at amd64-invalid-stack-middle.c:50
Backtrace stopped: Cannot access memory at address 0x2aaaaaab0000
Each and every time that the backtrace is requested, while the MI output
will similarly be consistently:
(gdb) -stack-info-depth
^done,depth="5"
Or,
(gdb) -stack-list-frames
^done,stack=[frame={level="0", .. snip lots .. }]
gdb/ChangeLog:
* frame.c (struct frame_info): Add stop_string field.
(get_prev_frame_always_1): Renamed from get_prev_frame_always.
(get_prev_frame_always): Old content moved into
get_prev_frame_always_1. Call get_prev_frame_always_1 inside
TRY_CATCH, handle MEMORY_ERROR exceptions.
(frame_stop_reason_string): New function definition.
* frame.h (unwind_stop_reason_to_string): Extend comment to
mention frame_stop_reason_string.
(frame_stop_reason_string): New function declaration.
* stack.c (frame_info): Switch to frame_stop_reason_string.
(backtrace_command_1): Switch to frame_stop_reason_string.
* unwind_stop_reason.def: Add UNWIND_MEMORY_ERROR.
(LAST_ENTRY): Changed to UNWIND_MEMORY_ERROR.
* guile/lib/gdb.scm: Add FRAME_UNWIND_MEMORY_ERROR to export list.
gdb/doc/ChangeLog:
* guile.texi (Frames In Guile): Mention FRAME_UNWIND_MEMORY_ERROR.
* python.texi (Frames In Python): Mention
gdb.FRAME_UNWIND_MEMORY_ERROR.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-invalid-stack-middle.exp: Update expected results.
* gdb.arch/amd64-invalid-stack-top.exp: Likewise.
|
|
https://sourceware.org/ml/gdb-patches/2014-05/msg00721.html
This function is confusingly named, the "frame_" in the name implies it
somehow is frame dependent, when in reality the function just converts an
'enum unwind_stop_reason' value to a string.
gdb/ChangeLog:
* frame.c (frame_stop_reason_string): Rename to ...
(unwind_stop_reason_to_string): this.
* frame.h (frame_stop_reason_string): Rename to ...
(unwind_stop_reason_to_string): this.
* stack.c (frame_info): Update call to frame_stop_reason_string.
(backtrace_command_1): Likewise.
* guile/scm-frame.c (gdbscm_unwind_stop_reason_string): Likewise.
* python/py-frame.c (gdbpy_frame_stop_reason_string): Likewise.
|
|
I noticed that "list" behaves differently in CLI vs MI. Particularly:
$ ./gdb -nx -q ./testsuite/gdb.mi/mi-cli
Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli...done.
(gdb) start
Temporary breakpoint 1 at 0x40054d: file ../../../src/gdb/testsuite/gdb.mi/basics.c, line 62.
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli
Temporary breakpoint 1, main () at ../../../src/gdb/testsuite/gdb.mi/basics.c:62
62 callee1 (2, "A string argument.", 3.5);
(gdb) list
57 {
58 }
59
60 main ()
61 {
62 callee1 (2, "A string argument.", 3.5);
63 callee1 (2, "A string argument.", 3.5);
64
65 do_nothing (); /* Hello, World! */
66
(gdb)
Note the list started at line 57. IOW, the program stopped at line
62, and GDB centered the list on that.
compare with:
$ ./gdb -nx -q ./testsuite/gdb.mi/mi-cli -i=mi
=thread-group-added,id="i1"
~"Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli..."
~"done.\n"
(gdb)
start
&"start\n"
...
~"\nTemporary breakpoint "
~"1, main () at ../../../src/gdb/testsuite/gdb.mi/basics.c:62\n"
~"62\t callee1 (2, \"A string argument.\", 3.5);\n"
*stopped,reason="breakpoint-hit",disp="del",bkptno="1",frame={addr="0x000000000040054d",func="main",args=[],file="../../../src/gdb/testsuite/gdb.mi/basics.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.mi/basics.c",line="62"},thread-id="1",stopped-threads="all",core="0"
=breakpoint-deleted,id="1"
(gdb)
-interpreter-exec console list
~"62\t callee1 (2, \"A string argument.\", 3.5);\n"
~"63\t callee1 (2, \"A string argument.\", 3.5);\n"
~"64\t\n"
~"65\t do_nothing (); /* Hello, World! */\n"
~"66\t\n"
~"67\t callme (1);\n"
~"68\t callme (2);\n"
~"69\t\n"
~"70\t return 0;\n"
~"71\t}\n"
^done
(gdb)
Here the list starts at line 62, where the program was stopped.
This happens because print_stack_frame, called from both normal_stop
and mi_on_normal_stop, is the function responsible for setting the
current sal from the selected frame, overrides the PRINT_WHAT
argument, and only after that does it decide whether to center the
current sal line or not, based on the overridden value, and it will
always decide false.
(The print_stack_frame call in mi_on_normal_stop is a little different
from the call in normal_stop, in that it is an unconditional
SRC_AND_LOC call. A future patch will make those uniform.)
A previous version of this patch made MI uniform with CLI here, by
making print_stack_frame also center when MI is active. That changed
the output of a "list" command in mi-cli.exp, to expect line 57
instead of 62, as per the example above.
However, looking deeper, that list in question is the first "list"
after the program stops, and right after the stop, before the "list",
the test did "set listsize 1". Let's try the same thing with the CLI:
(gdb) start
62 callee1 (2, "A string argument.", 3.5);
(gdb) set listsize 1
(gdb) list
57 {
Huh, that's unexpected. Why the 57? It's because print_stack_frame,
called in reaction to the breakpoint stop, expecting the next "list"
to show 10 lines (the listsize at the time) around line 62, sets the
lines listed range to 57-67 (62 +/- 5). If the user changes the
listsize before "list", why would we still show that range? Looks
bogus to me.
So the fix for this whole issue should be delay trying to center the
listing to until actually listing, so that the correct listsize can be
taken into account. This makes MI and CLI uniform too, as it deletes
the center code from print_stack_frame.
A series of tests are added to list.exp to cover this. mi-cli.exp was
after all correct all along, but it now gains an additional test that
lists lines with listsize 10, to ensure the centering is consistent
with CLI's.
One related Python test changed related output -- it's a test that
prints the line number after stopping for a breakpoint, similar to the
new list.exp tests. Previously we'd print the stop line minus 5 (due
to the premature centering), now we print the stop line. I think
that's a good change.
Tested on x86_64 Fedora 20.
gdb/
2014-05-21 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (list_command): Handle the first "list" after the
current source line having changed.
* frame.h (set_current_sal_from_frame): Remove 'center' parameter.
* infrun.c (normal_stop): Adjust call to
set_current_sal_from_frame.
* source.c (clear_lines_listed_range): New function.
(set_current_source_symtab_and_line, identify_source_line): Clear
the lines listed range.
(line_info): Handle the first "info line" after the current source
line having changed.
* stack.c (print_stack_frame): Remove center handling.
(set_current_sal_from_frame): Remove 'center' parameter. Don't
center sal.line.
gdb/testsuite/
2014-05-21 Pedro Alves <palves@redhat.com>
* gdb.base/list.exp (build_pattern, test_list): New procedures.
Use them to test variations of "list" after reaching a breakpoint.
* gdb.mi/mi-cli.exp (line_main_callme_2): New global.
Test "list" with listsize 10 after reaching a breakpoint.
* gdb.python/python.exp (decode_line current location line
number): Adjust expected line number.
|
|
SIGTRAMP_FRAME and ARCH_FRAME
When GDB debug DUMMY_FRAME, SIGTRAMP_FRAME and ARCH_FRAME, even if
"set disassemble-next-line on", it will not output the asm code:
(gdb) set disassemble-next-line on
(gdb) si
<signal handler called>
(gdb)
<signal handler called>
(gdb)
<signal handler called>
So make this patch make they can work together, it will become:
(gdb) si
<signal handler called>
=> 0xffffffff816bfb09 <int_with_check+0>: 65 48 8b 0c 25 c8 c7 00 00 mov %gs:0xc7c8,%rcx
(gdb)
<signal handler called>
=> 0xffffffff816bfb12 <int_with_check+9>: 48 81 e9 d8 1f 00 00 sub $0x1fd8,%rcx
(gdb)
<signal handler called>
=> 0xffffffff816bfb19 <int_with_check+16>: 8b 51 10 mov 0x10(%rcx),%edx
2014-04-27 Hui Zhu <hui@codesourcery.com>
* stack.c (print_frame_info): Call do_gdb_disassembly with
DUMMY_FRAME, SIGTRAMP_FRAME and ARCH_FRAME.
|
|
This patch starts changing minimal symbols to be independent of the
program space.
Specifically, it adds a new objfile parameter to MSYMBOL_VALUE_ADDRESS
and changes all the code to use it. This is needed so we can change
gdb to apply the section offset when a minsym's address is computed,
as opposed to baking the offsets into the symbol itself.
A few spots still need the unrelocated address. For these, we
introduce MSYMBOL_VALUE_RAW_ADDRESS.
As a convenience, we also add the new macro BMSYMBOL_VALUE_ADDRESS,
which computes the address of a bound minimal symbol. This just does
the obvious thing with the fields.
Note that this change does not actually enable program space
independence. That requires more changes to gdb. However, to ensure
that these changes compile properly, this patch does add the needed
section lookup code to MSYMBOL_VALUE_ADDRESS -- it just ensures it has
no effect at runtime by multiplying the offset by 0.
2014-02-26 Tom Tromey <tromey@redhat.com>
* ada-lang.c (ada_main_name): Update.
(ada_add_standard_exceptions): Update.
* ada-tasks.c (ada_tasks_inferior_data_sniffer): Update.
* aix-thread.c (pdc_symbol_addrs, pd_enable): Update.
* arm-tdep.c (skip_prologue_function, arm_skip_stub): Update.
* auxv.c (ld_so_xfer_auxv): Update.
* avr-tdep.c (avr_scan_prologue): Update.
* ax-gdb.c (gen_var_ref): Update.
* blockframe.c (get_pc_function_start)
(find_pc_partial_function_gnu_ifunc): Update.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint): Update.
* bsd-uthread.c (bsd_uthread_lookup_address): Update.
* c-valprint.c (c_val_print): Update.
* coff-pe-read.c (add_pe_forwarded_sym): Update.
* common/agent.c (agent_look_up_symbols): Update.
* dbxread.c (find_stab_function_addr, end_psymtab): Update.
* dwarf2loc.c (call_site_to_target_addr): Update.
* dwarf2read.c (dw2_find_pc_sect_symtab): Update.
* elfread.c (elf_gnu_ifunc_record_cache)
(elf_gnu_ifunc_resolve_by_got): Update.
* findvar.c (default_read_var_value): Update.
* frame.c (inside_main_func): Update.
* frv-tdep.c (frv_frame_this_id): Update.
* glibc-tdep.c (glibc_skip_solib_resolver): Update.
* gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline):
Update.
* hppa-hpux-tdep.c (hppa64_hpux_search_dummy_call_sequence)
(hppa_hpux_find_dummy_bpaddr): Update.
* hppa-tdep.c (hppa_symbol_address): Update.
* infcmd.c (until_next_command): Update.
* jit.c (jit_read_descriptor, jit_breakpoint_re_set_internal):
Update.
* linespec.c (minsym_found, add_minsym): Update.
* linux-nat.c (get_signo): Update.
* linux-thread-db.c (inferior_has_bug): Update.
* m32c-tdep.c (m32c_return_value)
(m32c_m16c_address_to_pointer): Update.
* m32r-tdep.c (m32r_frame_this_id): Update.
* m68hc11-tdep.c (m68hc11_get_register_info): Update.
* machoread.c (macho_resolve_oso_sym_with_minsym): Update.
* maint.c (maintenance_translate_address): Update.
* minsyms.c (lookup_minimal_symbol_by_pc_name): Update.
(frob_address): New function.
(lookup_minimal_symbol_by_pc_section_1): Use raw addresses,
frob_address. Rename parameter to "pc_in".
(compare_minimal_symbols, compact_minimal_symbols): Use raw
addresses.
(find_solib_trampoline_target, minimal_symbol_upper_bound):
Update.
* mips-linux-tdep.c (mips_linux_skip_resolver): Update.
* mips-tdep.c (mips_skip_pic_trampoline_code): Update.
* objc-lang.c (find_objc_msgsend): Update.
* objfiles.c (objfile_relocate1): Update.
* obsd-tdep.c (obsd_skip_solib_resolver): Update.
* p-valprint.c (pascal_val_print): Update.
* parse.c (write_exp_msymbol): Update.
* ppc-linux-tdep.c (ppc_linux_spe_context_lookup)
(ppc_elfv2_skip_entrypoint): Update.
* ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update.
* printcmd.c (build_address_symbolic, msym_info)
(address_info): Update.
* proc-service.c (ps_pglobal_lookup): Update.
* psymtab.c (find_pc_sect_psymtab_closer)
(find_pc_sect_psymtab, find_pc_sect_symtab_from_partial):
Change msymbol parameter to bound_minimal_symbol.
* ravenscar-thread.c (get_running_thread_id): Update.
* remote.c (remote_check_symbols): Update.
* sh64-tdep.c (sh64_elf_make_msymbol_special): Use raw
address.
* sol2-tdep.c (sol2_skip_solib_resolver): Update.
* solib-dsbt.c (lm_base): Update.
* solib-frv.c (lm_base, main_got): Update.
* solib-irix.c (locate_base): Update.
* solib-som.c (som_solib_create_inferior_hook)
(link_map_start): Update.
* solib-spu.c (spu_enable_break, ocl_enable_break): Update.
* solib-svr4.c (elf_locate_base, enable_break): Update.
* spu-tdep.c (spu_get_overlay_table, spu_catch_start)
(flush_ea_cache): Update.
* stabsread.c (define_symbol, scan_file_globals): Update.
* stack.c (find_frame_funname): Update.
* symfile-debug.c (debug_qf_expand_symtabs_matching)
(debug_qf_find_pc_sect_symtab): Update.
* symfile.c (simple_read_overlay_table)
(simple_overlay_update): Update.
* symfile.h (struct quick_symbol_functions)
<find_pc_sect_symtab>: Change type of msymbol to
bound_minimal_symbol.
* symmisc.c (dump_msymbols): Update.
* symtab.c (find_pc_sect_symtab_via_partial)
(find_pc_sect_psymtab, find_pc_sect_line, skip_prologue_sal)
(search_symbols, print_msymbol_info): Update.
* symtab.h (MSYMBOL_VALUE_RAW_ADDRESS): New macro.
(MSYMBOL_VALUE_ADDRESS): Redefine.
(BMSYMBOL_VALUE_ADDRESS): New macro.
* tracepoint.c (scope_info): Update.
* tui/tui-disasm.c (tui_find_disassembly_address)
(tui_get_begin_asm_address): Update.
* valops.c (find_function_in_inferior): Update.
* value.c (value_static_field, value_fn_field): Update.
|
|
In a later patch we're going to change the minimal symbol address
calculation to apply section offsets at the point of use. To make it
simpler to catch potential problem spots, this patch changes the
representation of minimal symbols and introduces new
minimal-symbol-specific variants of the various accessors. This is
necessary because it would be excessively ambitious to try to convert
all the symbol types at once.
The core of this change is just renaming a field in minimal_symbol;
the rest is just a fairly mechanical rewording.
2014-02-26 Tom Tromey <tromey@redhat.com>
* symtab.h (struct minimal_symbol) <mginfo>: Rename from ginfo.
(MSYMBOL_VALUE, MSYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_BYTES)
(MSYMBOL_BLOCK_VALUE, MSYMBOL_VALUE_CHAIN, MSYMBOL_LANGUAGE)
(MSYMBOL_SECTION, MSYMBOL_OBJ_SECTION, MSYMBOL_NATURAL_NAME)
(MSYMBOL_LINKAGE_NAME, MSYMBOL_PRINT_NAME, MSYMBOL_DEMANGLED_NAME)
(MSYMBOL_SET_LANGUAGE, MSYMBOL_SEARCH_NAME)
(MSYMBOL_MATCHES_SEARCH_NAME, MSYMBOL_SET_NAMES): New macros.
* ada-lang.c (ada_main_name): Update.
(ada_lookup_simple_minsym): Update.
(ada_make_symbol_completion_list): Update.
(ada_add_standard_exceptions): Update.
* ada-tasks.c (read_atcb, ada_tasks_inferior_data_sniffer): Update.
* aix-thread.c (pdc_symbol_addrs, pd_enable): Update.
* amd64-windows-tdep.c (amd64_skip_main_prologue): Update.
* arm-tdep.c (skip_prologue_function): Update.
(arm_skip_stack_protector, arm_skip_stub): Update.
* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
(arm_wince_skip_main_prologue): Update.
* auxv.c (ld_so_xfer_auxv): Update.
* avr-tdep.c (avr_scan_prologue): Update.
* ax-gdb.c (gen_var_ref): Update.
* block.c (call_site_for_pc): Update.
* blockframe.c (get_pc_function_start): Update.
(find_pc_partial_function_gnu_ifunc): Update.
* breakpoint.c (create_overlay_event_breakpoint): Update.
(create_longjmp_master_breakpoint): Update.
(create_std_terminate_master_breakpoint): Update.
(create_exception_master_breakpoint): Update.
(resolve_sal_pc): Update.
* bsd-uthread.c (bsd_uthread_lookup_address): Update.
* btrace.c (ftrace_print_function_name, ftrace_function_switched):
Update.
* c-valprint.c (c_val_print): Update.
* coff-pe-read.c (add_pe_forwarded_sym): Update.
* coffread.c (coff_symfile_read): Update.
* common/agent.c (agent_look_up_symbols): Update.
* dbxread.c (find_stab_function_addr): Update.
(end_psymtab): Update.
* dwarf2loc.c (call_site_to_target_addr): Update.
(func_verify_no_selftailcall): Update.
(tailcall_dump): Update.
(call_site_find_chain_1): Update.
(dwarf_expr_reg_to_entry_parameter): Update.
* elfread.c (elf_gnu_ifunc_record_cache): Update.
(elf_gnu_ifunc_resolve_by_got): Update.
* f-valprint.c (info_common_command): Update.
* findvar.c (read_var_value): Update.
* frame.c (get_prev_frame_1): Update.
(inside_main_func): Update.
* frv-tdep.c (frv_skip_main_prologue): Update.
(frv_frame_this_id): Update.
* glibc-tdep.c (glibc_skip_solib_resolver): Update.
* gnu-v2-abi.c (gnuv2_value_rtti_type): Update.
* gnu-v3-abi.c (gnuv3_rtti_type): Update.
(gnuv3_skip_trampoline): Update.
* hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline): Update.
(hppa64_hpux_in_solib_call_trampoline): Update.
(hppa_hpux_skip_trampoline_code): Update.
(hppa64_hpux_search_dummy_call_sequence): Update.
(hppa_hpux_find_import_stub_for_addr): Update.
(hppa_hpux_find_dummy_bpaddr): Update.
* hppa-tdep.c (hppa_symbol_address)
(hppa_lookup_stub_minimal_symbol): Update.
* i386-tdep.c (i386_skip_main_prologue): Update.
(i386_pe_skip_trampoline_code): Update.
* ia64-tdep.c (ia64_convert_from_func_ptr_addr): Update.
* infcall.c (get_function_name): Update.
* infcmd.c (until_next_command): Update.
* jit.c (jit_breakpoint_re_set_internal): Update.
(jit_inferior_init): Update.
* linespec.c (minsym_found): Update.
(add_minsym): Update.
* linux-fork.c (info_checkpoints_command): Update.
* linux-nat.c (get_signo): Update.
* linux-thread-db.c (inferior_has_bug): Update.
* m32c-tdep.c (m32c_return_value): Update.
(m32c_m16c_address_to_pointer): Update.
(m32c_m16c_pointer_to_address): Update.
* m32r-tdep.c (m32r_frame_this_id): Update.
* m68hc11-tdep.c (m68hc11_get_register_info): Update.
* machoread.c (macho_resolve_oso_sym_with_minsym): Update.
* maint.c (maintenance_translate_address): Update.
* minsyms.c (add_minsym_to_hash_table): Update.
(add_minsym_to_demangled_hash_table): Update.
(msymbol_objfile): Update.
(lookup_minimal_symbol): Update.
(iterate_over_minimal_symbols): Update.
(lookup_minimal_symbol_text): Update.
(lookup_minimal_symbol_by_pc_name): Update.
(lookup_minimal_symbol_solib_trampoline): Update.
(lookup_minimal_symbol_by_pc_section_1): Update.
(lookup_minimal_symbol_and_objfile): Update.
(prim_record_minimal_symbol_full): Update.
(compare_minimal_symbols): Update.
(compact_minimal_symbols): Update.
(build_minimal_symbol_hash_tables): Update.
(install_minimal_symbols): Update.
(terminate_minimal_symbol_table): Update.
(find_solib_trampoline_target): Update.
(minimal_symbol_upper_bound): Update.
* mips-linux-tdep.c (mips_linux_skip_resolver): Update.
* mips-tdep.c (mips_stub_frame_sniffer): Update.
(mips_skip_pic_trampoline_code): Update.
* msp430-tdep.c (msp430_skip_trampoline_code): Update.
* objc-lang.c (selectors_info): Update.
(classes_info): Update.
(find_methods): Update.
(find_imps): Update.
(find_objc_msgsend): Update.
* objfiles.c (objfile_relocate1): Update.
* objfiles.h (ALL_OBJFILE_MSYMBOLS): Update.
* obsd-tdep.c (obsd_skip_solib_resolver): Update.
* p-valprint.c (pascal_val_print): Update.
* parse.c (write_exp_msymbol): Update.
* ppc-linux-tdep.c (powerpc_linux_in_dynsym_resolve_code)
(ppc_linux_spe_context_lookup, ppc_elfv2_skip_entrypoint): Update.
* ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update.
* printcmd.c (build_address_symbolic): Update.
(sym_info): Update.
(address_info): Update.
* proc-service.c (ps_pglobal_lookup): Update.
* psymtab.c (find_pc_sect_psymtab_closer): Update.
(find_pc_sect_psymtab): Update.
* python/py-framefilter.c (py_print_frame): Update.
* ravenscar-thread.c (get_running_thread_id): Update.
* record-btrace.c (btrace_call_history, btrace_get_bfun_name):
Update.
* remote.c (remote_check_symbols): Update.
* rs6000-tdep.c (rs6000_skip_main_prologue): Update.
(rs6000_skip_trampoline_code): Update.
* sh64-tdep.c (sh64_elf_make_msymbol_special): Update.
* sol2-tdep.c (sol2_skip_solib_resolver): Update.
* solib-dsbt.c (lm_base): Update.
* solib-frv.c (lm_base): Update.
(main_got): Update.
* solib-irix.c (locate_base): Update.
* solib-som.c (som_solib_create_inferior_hook): Update.
(som_solib_desire_dynamic_linker_symbols): Update.
(link_map_start): Update.
* solib-spu.c (spu_enable_break): Update.
(ocl_enable_break): Update.
* solib-svr4.c (elf_locate_base): Update.
(enable_break): Update.
* spu-tdep.c (spu_get_overlay_table): Update.
(spu_catch_start): Update.
(flush_ea_cache): Update.
* stabsread.c (define_symbol): Update.
(scan_file_globals): Update.
* stack.c (find_frame_funname): Update.
(frame_info): Update.
* symfile.c (simple_read_overlay_table): Update.
(simple_overlay_update): Update.
* symmisc.c (dump_msymbols): Update.
* symtab.c (fixup_section): Update.
(find_pc_sect_line): Update.
(skip_prologue_sal): Update.
(search_symbols): Update.
(print_msymbol_info): Update.
(rbreak_command): Update.
(MCOMPLETION_LIST_ADD_SYMBOL): New macro.
(completion_list_objc_symbol): Update.
(default_make_symbol_completion_list_break_on): Update.
* tracepoint.c (scope_info): Update.
* tui/tui-disasm.c (tui_find_disassembly_address): Update.
(tui_get_begin_asm_address): Update.
* valops.c (find_function_in_inferior): Update.
* value.c (value_static_field): Update.
(value_fn_field): Update.
|
|
* configure.ac (libpython checking): Remove all but python.o from
CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
* configure: Regenerate.
* Makefile.in (SFILES): Add extension.c.
(HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
(COMMON_OBS): Add extension.o.
* extension.h: New file.
* extension-priv.h: New file.
* extension.c: New file.
* python/python-internal.h: #include "extension.h".
(gdbpy_auto_load_enabled): Declare.
(gdbpy_apply_val_pretty_printer): Declare.
(gdbpy_apply_frame_filter): Declare.
(gdbpy_preserve_values): Declare.
(gdbpy_breakpoint_cond_says_stop): Declare.
(gdbpy_breakpoint_has_cond): Declare.
(void source_python_script_for_objfile): Delete.
* python/python.c: #include "extension-priv.h".
Delete inclusion of "observer.h".
(extension_language_python): Moved here and renamed from
script_language_python in py-auto-load.c.
Redefined to be of type extension_language_defn.
(python_extension_script_ops): New global.
(python_extension_ops): New global.
(struct python_env): New member previous_active.
(restore_python_env): Call restore_active_ext_lang.
(ensure_python_env): Call set_active_ext_lang.
(gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
New arg extlang.
(gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
New arg extlang.
(gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
New arg extlang.
(gdbpy_eval_from_control_command): Renamed from
eval_python_from_control_command, made static. New arg extlang.
(gdbpy_source_script) Renamed from source_python_script, made static.
New arg extlang.
(gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
result to int. New arg extlang.
(gdbpy_source_objfile_script): Renamed from
source_python_script_for_objfile, made static. New arg extlang.
(gdbpy_start_type_printers): Renamed from start_type_printers, made
static. New args extlang, extlang_printers. Change result type to
"void".
(gdbpy_apply_type_printers): Renamed from apply_type_printers, made
static. New arg extlang. Rename arg printers to extlang_printers
and change type to ext_lang_type_printers *.
(gdbpy_free_type_printers): Renamed from free_type_printers, made
static. Replace argument arg with extlang, extlang_printers.
(!HAVE_PYTHON, eval_python_from_control_command): Delete.
(!HAVE_PYTHON, source_python_script): Delete.
(!HAVE_PYTHON, gdbpy_should_stop): Delete.
(!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
(!HAVE_PYTHON, start_type_printers): Delete.
(!HAVE_PYTHON, apply_type_printers): Delete.
(!HAVE_PYTHON, free_type_printers): Delete.
(_initialize_python): Delete call to observer_attach_before_prompt.
(finalize_python): Set/restore active extension language.
(gdbpy_finish_initialization) Renamed from
finish_python_initialization, made static. New arg extlang.
(gdbpy_initialized): New function.
* python/python.h: #include "extension.h". Delete #include
"value.h", "mi/mi-cmds.h".
(extension_language_python): Declare.
(GDBPY_AUTO_FILE_NAME): Delete.
(enum py_bt_status): Moved to extension.h and renamed to
ext_lang_bt_status.
(enum frame_filter_flags): Moved to extension.h.
(enum py_frame_args): Moved to extension.h and renamed to
ext_lang_frame_args.
(finish_python_initialization): Delete.
(eval_python_from_control_command): Delete.
(source_python_script): Delete.
(apply_val_pretty_printer): Delete.
(apply_frame_filter): Delete.
(preserve_python_values): Delete.
(gdbpy_script_language_defn): Delete.
(gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
(start_type_printers, apply_type_printers, free_type_printers): Delete.
* auto-load.c: #include "extension.h".
(GDB_AUTO_FILE_NAME): Delete.
(auto_load_gdb_scripts_enabled): Make public. New arg extlang.
(script_language_gdb): Delete, moved to extension.c and renamed to
extension_language_gdb.
(source_gdb_script_for_objfile): Delete.
(auto_load_pspace_info): New member unsupported_script_warning_printed.
(loaded_script): Change type of language member to
struct extension_language_defn *.
(init_loaded_scripts_info): Initialize
unsupported_script_warning_printed.
(maybe_add_script): Make static. Change type of language arg to
struct extension_language_defn *.
(clear_section_scripts): Reset unsupported_script_warning_printed.
(auto_load_objfile_script_1): Rewrite to use extension language API.
(auto_load_objfile_script): Make public. Remove support-compiled-in
and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
(source_section_scripts): Rewrite to use extension language API.
(load_auto_scripts_for_objfile): Rewrite to use
auto_load_scripts_for_objfile.
(collect_matching_scripts_data): Change type of language member to
struct extension_language_defn *.
(auto_load_info_scripts): Change type of language arg to
struct extension_language_defn *.
(unsupported_script_warning_print): New function.
(script_not_found_warning_print): Make static.
(_initialize_auto_load): Rewrite construction of scripts-directory
help.
* auto-load.h (struct objfile): Add forward decl.
(struct script_language): Delete.
(struct auto_load_pspace_info): Add forward decl.
(struct extension_language_defn): Add forward decl.
(maybe_add_script): Delete.
(auto_load_objfile_script): Declare.
(script_not_found_warning_print): Delete.
(auto_load_info_scripts): Update prototype.
(auto_load_gdb_scripts_enabled): Declare.
* python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
auto_load_python_scripts_enabled and made public.
(script_language_python): Delete, moved to python.c.
(gdbpy_script_language_defn): Delete.
(info_auto_load_python_scripts): Update to use
extension_language_python.
* breakpoint.c (condition_command): Replace call to
gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
(bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
with call to breakpoint_ext_lang_cond_says_stop.
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
from gdbpy_should_stop. Change result type to enum scr_bp_stop.
New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
(gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
New arg slang.
(local_setattro): Print name of extension language with existing
stop condition.
* valprint.c (val_print, value_print): Update to call
apply_ext_lang_val_pretty_printer.
* cp-valprint.c (cp_print_value): Update call to
apply_ext_lang_val_pretty_printer.
* python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_apply_val_pretty_printer): Renamed from
apply_val_pretty_printer. New arg extlang.
(!HAVE_PYTHON, apply_val_pretty_printer): Delete.
* cli/cli-cmds.c (source_script_from_stream): Rewrite to use
extension language API.
* cli/cli-script.c (execute_control_command): Update to call
eval_ext_lang_from_control_command.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
enum ext_lang_bt_status values. Update call to
apply_ext_lang_frame_filter.
(mi_cmd_stack_list_locals): Ditto.
(mi_cmd_stack_list_args): Ditto.
(mi_cmd_stack_list_variables): Ditto.
* mi/mi-main.c: Delete #include "python/python-internal.h".
Add #include "extension.h".
(mi_cmd_list_features): Replace reference to python internal variable
gdb_python_initialized with call to ext_lang_initialized_p.
* stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
Update to use enum ext_lang_frame_args. Update to call
apply_ext_lang_frame_filter.
* python/py-framefilter.c (extract_sym): Update to use enum
ext_lang_bt_status.
(extract_value, py_print_type, py_print_value): Ditto.
(py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
(py_mi_print_variables, py_print_locals, py_print_args): Ditto.
(py_print_frame): Ditto.
(gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
New arg extlang. Update to use enum ext_lang_bt_status.
* top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
finish_python_initialization. Replace with call to
finish_ext_lang_initialization.
* typeprint.c (do_free_global_table): Update to call
free_ext_lang_type_printers.
(create_global_typedef_table): Update to call
start_ext_lang_type_printers.
(find_global_typedef): Update to call apply_ext_lang_type_printers.
* typeprint.h (struct ext_lang_type_printers): Add forward decl.
(type_print_options): Change type of global_printers from "void *"
to "struct ext_lang_type_printers *".
* value.c (preserve_values): Update to call preserve_ext_lang_values.
* python/py-value.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_preserve_values): Renamed from preserve_python_values.
New arg extlang.
(!HAVE_PYTHON, preserve_python_values): Delete.
* utils.c (quit_flag): Delete, moved to extension.c.
(clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
extension.c.
* eval.c: Delete #include "python/python.h".
* main.c: Delete #include "python/python.h".
* defs.h: Update comment.
testsuite/
* gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
output.
* gdb.gdb/python-interrupts.exp: New file.
|
|
|
|
Hi,
I see such warning below on one compiler I am using.
cc1: warnings being treated as errors
../../workspace/gdb/stack.c: In function 'frame_info':
../../workspace/gdb/stack.c:1519:20: error: 'caller_pc' may be used uninitialized in this function
Go through the gdb-patches archives and find the "canonical" way to
fix this warning is to initialize the variable.
gdb:
2013-12-08 Yao Qi <yao@codesourcery.com>
* stack.c (frame_info): Initialize variable caller_pc.
|
|
Doing "info frame" in the outermost frame, when that was indicated by
the next frame saying the unwound PC is undefined/not saved, results
in error and incomplete output:
(gdb) bt
#0 thread_function0 (arg=0x0) at threads.c:63
#1 0x00000034cf407d14 in start_thread (arg=0x7ffff7fcb700) at pthread_create.c:309
#2 0x000000323d4f168d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:115
(gdb) frame 2
#2 0x000000323d4f168d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:115
115 call *%rax
(gdb) info frame
Stack level 2, frame at 0x0:
rip = 0x323d4f168d in clone (../sysdeps/unix/sysv/linux/x86_64/clone.S:115); saved rip Register 16 was not saved
(gdb)
Not saved register values are treated as optimized out values
internally throughout. stack.c:frame_info is handing unvailable
values, but not optimized out ones. The patch deletes the
frame_unwind_caller_pc_if_available wrapper function and instead lets
errors propagate to frame_info (it's only user).
As frame_unwind_pc now needs to be able to handle and cache two
different error scenarios, the prev_pc.p variable is replaced with an
enumeration.
(FWIW, I looked into making gdbarch_unwind_pc or a variant return
struct value's instead, but it results in lots of boxing and unboxing
for no real gain -- e.g., the mips and arm implementations need to do
computation on the unboxed PC value. Might as well throw an error on
first attempt to get at invalid contents.)
After the patch, we get:
(gdb) info frame
Stack level 2, frame at 0x0:
rip = 0x323d4f168d in clone (../sysdeps/unix/sysv/linux/x86_64/clone.S:115); saved rip = <not saved>
Outermost frame: outermost
caller of frame at 0x7ffff7fcafc0
source language asm.
Arglist at 0x7ffff7fcafb8, args:
Locals at 0x7ffff7fcafb8, Previous frame's sp is 0x7ffff7fcafc8
(gdb)
A new test is added. It's based off dw2-reg-undefined.exp, and tweaked to
mark the return address (rip) of "stop_frame" as undefined.
Tested on x86_64 Fedora 17.
gdb/
2013-12-06 Pedro Alves <palves@redhat.com>
* frame.c (enum cached_copy_status): New enum.
(struct frame_info) <prev_pc.p>: Change type to enum
cached_copy_status.
(fprint_frame): Handle not saved and unavailable prev_pc values.
(frame_unwind_pc_if_available): Delete and merge contents into ...
(frame_unwind_pc): ... here. Handle OPTIMIZED_OUT_ERROR. Adjust
to use enum cached_copy_status.
(frame_unwind_caller_pc_if_available): Delete.
(create_new_frame): Adjust.
* frame.h (frame_unwind_caller_pc_if_available): Delete
declaration.
* stack.c (frame_info): Use frame_unwind_caller_pc instead of
frame_unwind_caller_pc_if_available, and handle
NOT_AVAILABLE_ERROR and OPTIMIZED_OUT_ERROR errors.
* valprint.c (val_print_optimized_out): Use val_print_not_saved.
(val_print_not_saved): New function.
* valprint.h (val_print_not_saved): Declare.
gdb/testsuite/
2013-12-06 Pedro Alves <palves@redhat.com>
* gdb.dwarf2/dw2-undefined-ret-addr.S: New file.
* gdb.dwarf2/dw2-undefined-ret-addr.c: New file.
* gdb.dwarf2/dw2-undefined-ret-addr.exp: New file.
|
|
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
|
|
"break", "list")
"info threads" changes the default source for "break" and "list", to
whatever the location of the first/bottom thread in the thread list
is...
(gdb) b start
(gdb) c
...
(gdb) list
*lists "start"*
(gdb) b 23
Breakpoint 3 at 0x400614: file test.c, line 23.
(gdb) info threads
Id Target Id Frame
* 2 Thread 0x7ffff7fcb700 (LWP 1760) "test" start (arg=0x0) at test.c:23
1 Thread 0x7ffff7fcc740 (LWP 1748) "test" 0x000000323dc08e60 in pthread_join (threadid=140737353922304, thread_return=0x0) at pthread_join.c:93
(gdb) b 23
Breakpoint 4 at 0x323dc08d90: file pthread_join.c, line 23.
^^^^^^^^^^^^^^^
(gdb) list
93 lll_wait_tid (pd->tid);
94
95
96 /* Restore cancellation mode. */
97 CANCEL_RESET (oldtype);
98
99 /* Remove the handler. */
100 pthread_cleanup_pop (0);
101
102
The issue is that print_stack_frame always sets the current sal to the
frame's sal. print_frame_info (which print_stack_frame calls to do
most of the work) also sets the last displayed sal, but only if
print_what isn't LOCATION. Now the call in question, from within
thread.c:print_thread_info, does pass in LOCATION as print_what, but
print_stack_frame doesn't have the same check print_frame_info has.
We could consider adding it, but setting these globals depending on
print_what isn't very clean, IMO. What we have is two logically
distinct operations mixed in the same function(s):
#1 - print frame, in the format specified by {print_what,
print_level and print_args}.
#2 - We're displaying a frame to the user, and I want the default
sal to point here, because the program stopped here, or the user
did some context-changing command (up, down, etc.).
So I added a new parameter to print_stack_frame & friends for point
#2, and went through all calls in the tree adjusting as necessary.
Tested on x86_64 Fedora 17.
gdb/
2013-09-17 Pedro Alves <palves@redhat.com>
PR gdb/15911
* ada-tasks.c (task_command_1): Adjust call to print_stack_frame.
* bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
* corelow.c (core_open):
* frame.h (print_stack_frame, print_frame_info): New
'set_current_sal' parameter.
* infcmd.c (finish_command, kill_command): Adjust call to
print_stack_frame.
* inferior.c (inferior_command): Likewise.
* infrun.c (normal_stop): Likewise.
* linux-fork.c (linux_fork_context): Likewise.
* record-full.c (record_full_goto_entry, record_full_restore):
Likewise.
* remote-mips.c (common_open): Likewise.
* stack.c (print_stack_frame): New 'set_current_sal' parameter.
Use it.
(print_frame_info): New 'set_current_sal' parameter. Set the last
displayed sal depending on the new paremeter instead of looking at
print_what.
(backtrace_command_1, select_and_print_frame, frame_command)
(current_frame_command, up_command, down_command): Adjust call to
print_stack_frame.
* thread.c (print_thread_info, restore_selected_frame)
(do_captured_thread_select): Adjust call to print_stack_frame.
* tracepoint.c (tfind_1): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
(mi_cmd_stack_info_frame): Likewise.
* mi/mi-interp.c (mi_on_normal_stop): Likewise.
* mi/mi-main.c (mi_cmd_exec_return, mi_cmd_trace_find): Likewise.
gdb/testsuite/
* gdb.threads/info-threads-cur-sal-2.c: New file.
* gdb.threads/info-threads-cur-sal.c: New file.
* gdb.threads/info-threads-cur-sal.exp: New file.
|
|
* cp-support.c: Ditto.
* source.c: Ditto.
* stack.c: Ditto.
|
|
* stack.c (read_frame_arg): Set 'entryval_error' to NULL if
'entryval' is set.
gdb/testsuite/
* gdb.trace/collection.exp (gdb_collect_args_test): Set
"only" and "both" to 'print entry-values' before selecting
trace frame.
|
|
* frame.h (read_frame_local): Declare.
* mi/mi-cmd-stack.c (list_args_or_locals): Call
read_frame_local.
* stack.c (read_frame_local): New.
gdb/testsuite/
* gdb.trace/mi-trace-unavailable.exp: Don't set
"print entry-values" to "no".
(test_trace_unavailable): Set various values to
"print entry-values" to test that the output of
'-stack-list-locals' is not affected, and then set
set "print entry-values" to "no".
|
|
* gdbcmd.h (setprintrawlist, showprintrawlist): Declare.
* stack.c (print_raw_frame_arguments): New static global.
(print_frame_arg): Set opts.raw from print_raw_frame_arguments.
(_initialize_stack): New command "set/show print raw frame-arguments".
* valprint.c (setprintrawlist, showprintrawlist): New globals.
(set_print_raw, show_print_raw): New functions.
(_initialize_valprint): New prefix command "set/show print raw".
* valprint.h (value_print_options): Improve comments.
doc/
* gdb.texinfo (Print Settings): Document "print raw frame-arguments".
testsuite/
* gdb.python/py-frame-args.c: New file.
* gdb.python/py-frame-args.py: New file.
* gdb.python/py-frame-args.exp New file.
|
|
Enum values rename as well. All uses updated.
* valprint.h (value_print_options): Rename member pretty to
pretty format. Rename member prettyprint_arrays to
prettyformat_arrays. Rename member prettyprint_structs to
prettyformat_structs. All uses updated.
(get_no_prettyformat_print_options): Renamed from
get_raw_print_options.
* valprint.c (get_no_prettyformat_print_options): Renamed from
get_raw_print_options. All callers updated.
(show_prettyformat_structs): Renamed from show_prettyprint_structs.
All callers updated.
(show_prettyformat_arrays): Renamed from show_prettyprint_arrays.
All callers updated.
(_initialize_valprint): Improve help text for "set print pretty" and
"set print arrays".
testsuite/
* gdb.base/default.exp: Update expected output of "show print array"
and "show print pretty".
|
|
gdb/ChangeLog
* stack.c (read_frame_arg): No longer fetch lazy values.
* value.c (value_optimized_out): If the value is not already
marked optimized out, and is lazy then fetch it.
(value_primitive_field): Move optimized out check to later in the
function, after we have loaded any lazy values.
(value_fetch_lazy): Use optimized out flag directly rather than
calling optimized_out method.
gdb/testsuite/ChangeLog
* gdb.dwarf2/dw2-reg-undefined.exp: New file.
* gdb.dwarf2/dw2-reg-undefined.c: Likewise.
* gdb.dwarf2/dw2-reg-undefined.S: Likewise.
|
|
* stack.c (backtrace_command_1): Fix indentation.
|
|
'func_name' from find_frame_funname.
(ada_unhandled_exception_name_addr_from_raise): Add cleanups
for func_name from find_frame_funname.
* python/py-frame.c (frapy_name): Add explicit free of
'name' from find_frame_funname.
* stack.c (find_frame_funname): Add comment explaining that
funcp must be freed by the caller.
Return copy of symbol names instead of pointers.
(print_frame): Add a cleanup for 'funname' from
find_frame_funname.
* stack.h (find_frame_funname): Remove "const" from
'funname' parameter.
|
|
* stack.c (backtrace_command_1): Add "no-filters", and Python frame
filter logic.
(backtrace_command): Add "no-filters" option parsing.
(_initialize_stack): Alter help to reflect "no-filters" option.
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-framefilter.o
(SUBDIR_PYTHON_SRCS): Add py-framefilter.c
(py-frame.o): Add target
* data-directory/Makefile.in (PYTHON_DIR): Add Python frame
filter files.
* python/python.h: Add new frame filter constants, and flag enum.
(apply_frame_filter): Add definition.
* python/python.c (apply_frame_filter): New non-Python
enabled function.
* python/py-utils.c (py_xdecref): New function.
(make_cleanup_py_xdecref): Ditto.
* python/py-objfile.c: Declare frame_filters dictionary.
(objfpy_dealloc): Add frame_filters dealloc.
(objfpy_new): Initialize frame_filters attribute.
(objfile_to_objfile_object): Ditto.
(objfpy_get_frame_filters): New function.
(objfpy_set_frame_filters): New function.
* python/py-progspace.c: Declare frame_filters dictionary.
(pspy_dealloc): Add frame_filters dealloc.
(pspy_new): Initialize frame_filters attribute.
(pspacee_to_pspace_object): Ditto.
(pspy_get_frame_filters): New function.
(pspy_set_frame_filters): New function.
* python/py-framefilter.c: New file.
* python/lib/gdb/command/frame_filters.py: New file.
* python/lib/gdb/frames.py: New file.
* python/lib/gdb/__init__.py: Initialize global frame_filters
dictionary
* python/lib/gdb/FrameDecorator.py: New file.
* python/lib/gdb/FrameIterator.py: New file.
* mi/mi-cmds.c (mi_cmds): Add frame filters command.
* mi/mi-cmds.h: Declare.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Add
--no-frame-filter logic, and Python frame filter logic.
(stack_enable_frame_filters): New function.
(parse_no_frame_option): Ditto.
(mi_cmd_stack_list_frames): Add --no-frame-filter and Python frame
filter logic.
(mi_cmd_stack_list_locals): Ditto.
(mi_cmd_stack_list_args): Ditto.
(mi_cmd_stack_list_variables): Ditto.
* NEWS: Add frame filter note.
2013-05-10 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-framefilter.py: New File.
* gdb.python/py-framefilter-mi.exp: Ditto.
* gdb.python/py-framefilter.c: Ditto.
* gdb.python/py-framefilter-mi.exp: Ditto.
* gdb.python/py-framefilter-mi.c: Ditto,
* gdb.python/py-framefilter-gdb.py.in: Ditto.
2013-05-10 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Backtrace): Add "no-filter" argument.
(Python API): Add Frame Filters API, Frame Wrapper API,
Writing a Frame Filter/Wrapper, Managing Management of Frame
Filters chapter entries.
(Frame Filters API): New Node.
(Frame Wrapper API): New Node.
(Writing a Frame Filter): New Node.
(Managing Frame Filters): New Node.
(Progspaces In Python): Add note about frame_filters attribute.
(Objfiles in Python): Ditto.
(GDB/MI Stack Manipulation): Add -enable-frame-filters command,
@anchors and --no-frame-filters option to -stack-list-variables,
-stack-list-frames, -stack-list-locals and -stack-list-arguments
commands.
|
|
... using the target_so_ops framework.
gdb/ChangeLog:
* target.h (TARGET_OBJECT_AIX_LIBRARIES): New target_object enum.
* features/library-list-aix.dtd: New file.
* solib-aix.h, solib-aix.c: New file.
* rs6000-aix-tdep.c: #include "solib.h" and "solib-aix.h".
(rs6000_find_toc_address_hook): Delete.
(rs6000_push_dummy_call): Rewrite code setting the TOC value.
(rs6000_aix_init_osabi): Register solib_aix_so_ops.
* rs6000-nat.c: Remove "xcoffsolib.h" include. Include
"xml-utils.h".
(map_vmap, vmap_exec, vmap_ldinfo, add_vmap, objfile_symbol_add)
(vmap_symtab, fixup_breakpoints): Delete.
(rs6000_xfer_shared_libraries): New function.
(rs6000_xfer_partial): Add TARGET_OBJECT_AIX_LIBRARIES handling.
(vmap_secs, bss_data_overlap, vmap_add_symbols): Delete.
(xcoff_relocate_symtab, xcoff_relocate_core): Delete.
(rs6000_ptrace_ldinfo, rs6000_core_ldinfo)
(rs6000_xfer_shared_library): New function.
(find_toc_address): Delete.
(_initialize_rs6000_nat): Do not set rs6000_find_toc_address_hook.
* rs6000-tdep.h (rs6000_find_toc_address_hook): Remove.
* xcoffread.c (record_minimal_symbol): Reloate symbol address
before creating minimal symbol. Adjust function description
accordingly.
(scan_xcoff_symtab): Replace call to
prim_record_minimal_symbol_and_info by call to
record_minimal_symbol.
(xcoff_symfile_offsets): Reimplement mostly as a wrapper
around default_symfile_offsets.
* configure.tgt: Add solib-aix.o to gdb_target_obs for
powerpc-aix targets.
* config/rs6000/nm-rs6000.h: Delete.
* config/powerpc/aix.mh (NAT_FILE): Delete.
(NATDEPFILES): Remove xcoffsolib.o.
* Makefile.in (XMLFILES): Add library-list-aix.dtd.
(ALL_TARGET_OBS): Add solib-aix.o.
(HFILES_NO_SRCDIR): Remove xcoffsolib.h and
config/rs6000/nm-rs6000.h. Add solib-aix.h.
(ALLDEPFILES): Add solib-aix.c. Remove xcoffsolib.c.
* xcoffsolib.h, xcoffsolib.c: Delete.
* solib.c (reload_shared_libraries): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK.
* breakpoint.c (handle_solib_event): Remove reference to SOLIB_ADD.
(disable_breakpoints_in_shlibs): Remove reference to PC_SOLIB.
(momentary_bkpt_re_set): Replace SOLIB_ADD by solib_add in
comment.
* corelow.c (deprecated_core_resize_section_table): Delete.
* exec.c: Remove include of xcoffsolib.h".
(map_vmap, vmap): Delete.
(exec_close_1): Remove references to vmap.
(exec_file_attach): Remove vmap handling code, and reference
to DEPRECATED_IBM6000_TARGET.
(bfdsec_to_vmap): Delete.
(exec_files_info): Remove block of code handling VMAP.
* infcmd.c (post_create_inferior): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK and SOLIB_ADD.
* infrun.c (follow_exec): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK.
* stack.c (print_frame): Remove reference to PC_SOLIB.
* solib-dsbt.c (dsbt_current_sos): Adjust comment.
(dsbt_relocate_main_executable): Likewise.
* solib-frv.c (frv_current_sos): Likewise.
gdb/doc/ChangeLog:
* gdbint.texinfo (Algorithms): Remove entries documenting
DEPRECATED_IBM6000_TARGET, SOLIB_ADD, and
SOLIB_CREATE_INFERIOR_HOOK.
|
|
(lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
Remove objfile argument.
(lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
Return bound_minimal_symbol.
* minsyms.c (lookup_minimal_symbol_by_pc_1)
(lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
Return bound_minimal_symbol.
(in_gnu_ifunc_stub): Update.
(lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
Remove 'objfile_p' argument.
(lookup_solib_trampoline_symbol_by_pc): Update.
* ada-tasks.c, amd64-windows-tdep.c, arm-tdep.c,
arm-wince-tdep.c, block.c, blockframe.c, breakpoint.c, btrace.c,
c-valprint.c, dwarf2loc.c, elfread.c, frame.c, frv-tdep.c,
glibc-tdep.c, gnu-v2-abi.c, gnu-v3-abi.c, hppa-hpux-tdep.c,
i386-tdep.c, ia64-tdep.c, infcall.c, infcmd.c, jit.c,
linux-fork.c, m32c-tdep.c, m68hc11-tdep.c, maint.c,
mips-tdep.c, p-valprint.c, parse.c, ppc-linux-tdep.c,
ppc-sysv-tdep.c, printcmd.c, rs6000-tdep.c, sh64-tdep.c,
stack.c, symtab.c, tui/tui-disasm.c: Update.
|
|
if possible.
* dwarf2read.c (read_func_scope): Remove old FIXME.
* eval.c (evaluate_subexp_standard): Check SYMBOL_COMPUTED_OPS,
not LOC_COMPUTED.
* findvar.c (symbol_read_needs_frame, default_read_var_value):
Unconditionally call via computed ops, if possible.
* printcmd.c (address_info): Unconditionally call via computed ops,
if possible.
* stack.c (read_frame_arg): Unconditionally call via computed ops,
if possible.
* symtab.c (register_symbol_computed_impl): Sanity check 'ops'.
* tracepoint.c (scope_info): Unconditionally call via computed ops,
if possible.
|
|
(trace_pass_command): Likewise.
* cli/cli-cmds.c: Include cli/cli-utils.h.
(source_command): Use skip-spaces.
(disassemble_command): Likewise.
* findcmd.c: Include cli/cli-utils.h.
(parse_find_args): Use skip_spaces.
* go32-nat.c: Include cli/cli-utils.h.
(go32_sldt): Use skip_spaces.
(go32_sgdt): Likewise.
(go32_sidt): Likewise.
(go32_pde): Likewise.
(go32_pte): Likewise.
(go32_pte_for_address): Likewise.
* infcmd.c: Include cli/cli-utils.h.
(registers_info): Use skip_spaces.
* linux-tdep.c (read_mapping): Use skip_spaces_const.
(linux_info_proc): Likewise.
* linux-thread-db.c: Include cli/cli-utils.h.
(info_auto_load_libthread_db): Use skip_spaces_const.
* m32r-rom.c: Include cli/cli-utils.h.
(m32r_upload_command): Use skip_spaces.
* maint.c: Include cli/cli-utils.h.
(maintenance_translate_address): Use skip_spaces.
* mi/mi-parse.c: Include cli/cli-utils.h.
(mi_parse_argv): Use skip_spaces.
(mi_parse): Likewise.
* minsyms.c: Include cli/cli-utils.h.
(msymbol_hash_iw): Use skip_spaces_const.
* objc-lang.c: Include cli/cli-utils.h.
(parse_selector): Use skip_spaces.
(parse_method): Likewise.
* python/python.c: Include cli/cli-utils.h.
(python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
(python_command)[HAVE_PYTHON]: Likewise.
(python_interactive_command)[!HAVE_PYTHON]: Likewise.
* remote-m32r-sdi.c: Include cli/cli-utils.h.
(m32r_load): Use skip_spaces.
* serial.c: Include cli/cli-utils.h.
(serial_open): Use skip_spaces_const.
* stack.c: Include cli/cli-utils.h.
(parse_frame_specification_1): Use skip_spaces_const.
* symfile.c: Include cli/cli-utils.h.
(set_ext_lang_command): Use skip_spaces.
* symtab.c: Include cli/cli-utils.h.
(rbreak_command): Use skip_spaces.
* thread.c (thread_name_command): Use skip_spaces.
* tracepoint.c (validate_actionline): Use skip_spaces.
(encode_actions_1): Likewise.
(trace_find_range_command): Likewise.
(trace_find_outside_command): Likewise.
(trace_dump_actions): Likewise.
|
|
warning.
|
|
gdb/
* sparc-tdep.c (sparc32_return_value): Handle writing return value when
using RETURN_VALUE_ABI_PRESERVES_ADDRESS.
* value.c (struct_return_convention): New function.
(using_struct_return): Implement in terms of struct_return_convention.
* value.h (struct_return_convention): Declare.
* stack.c (return_command): Allow successful overriding of the return
value when RETURN_VALUE_ABI_PRESERVES_ADDRESS.
|
|
* ada-lang.c (user_select_syms): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
* breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
(clear_command): New variable sal_fullname, initialize it. Replace
compare_filenames_for_search by filename_cmp with sal_fullname.
(say_where, update_static_tracepoint): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
* cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
Likewise.
* dwarf2read.c: Include source.h.
(fixup_go_packaging): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* linespec.c (add_sal_to_sals): Rename variable filename to fullname.
Replace symtab->filename refererences by symtab_to_filename_for_display
calls.
(create_sals_line_offset, convert_linespec_to_sals): New variable
fullname, initialize it, replace symtab->filename reference by the
variable.
* linux-fork.c: Include source.h.
(info_checkpoints_command): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* macroscope.c (sal_macro_scope): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
* mdebugread.c: Include source.h.
(psymtab_to_symtab_1): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
(mi_cmd_file_list_exec_source_files): Likewise.
* printcmd.c: Include source.h.
(build_address_symbolic): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* psymtab.c (partial_map_symtabs_matching_filename)
(read_psymtabs_with_fullname): Call compare_filenames_for_search also
with psymtab_to_fullname.
* python/py-symtab.c (stpy_str): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
(stpy_get_filename): New variable filename, initialize it, use instead
of symtab->filename refererences.
(salpy_str): Make variable filename const char *. Replace
symtab->filename refererences by symtab_to_filename_for_display calls.
* skip.c: Include source.h and filenames.h.
(skip_file_command): Remove const from the symtab variable. Replace
symtab->filename refererences by symtab_to_fullname call.
(function_name_is_marked_for_skip): New variables searched_for_fullname
and fullname. Use them to search also with symtab's fullname.
* source.c (find_source_lines): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
(print_source_lines_base): New variable filename, use it instead of
symtab->filename. Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
(line_info, forward_search_command): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
(reverse_search_command): Replace symtab->filename refererences by
symtab_to_filename_for_display calls. New variable filename for it.
* stack.c (frame_info): Likewise.
* symmisc.c: Include source.h.
(dump_objfile, dump_symtab_1, maintenance_print_symbols)
(maintenance_info_symtabs): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* symtab.c (iterate_over_some_symtabs): Call
compare_filenames_for_search also with symtab_to_fullname.
(lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
symtab->filename refererences by symtab_to_filename_for_display calls.
(find_line_symtab): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
(file_matches): Replace filename_cmp by compare_filenames_for_search.
(print_symbol_info): Make the last parameter const char *. New
variable s_filename. Use it in the function.
(symtab_symbol_info): Make the last_filename variable const char *.
Replace symtab->filename refererences by symtab_to_filename_for_display
calls.
(rbreak_command): New variable fullname. Use it. Replace
symtab->filename refererence by symtab_to_filename_for_display call.
* tracepoint.c (set_traceframe_context, trace_find_line_command)
(print_one_static_tracepoint_marker): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
* tui/tui-source.c (tui_set_source_content): New variables filename and
s_filename. Replace symtab->filename refererences by this variable.
Replace other symtab->filename refererences by
symtab_to_filename_for_display calls.
|
|
Add a new variable that controls a way in which filenames are
displayed.
* NEWS (set filename-display): New entry.
* source.c (filename_display_basename, filename_display_relative)
(filename_display_absolute, filename_display_kind_names)
(filename_display_string, show_filename_display_string)
(symtab_to_filename_for_display): New.
(_initialize_source): Added initialization of 'filename-display'
variable.
* source.h (symtab_to_filename_for_display): Added declaration.
* stack.c (print_frame): Added new variable and calling of a new
function and condition with this variable. Changed third argument of
calling of a function.
gdb/doc/
* gdb.texinfo (Backtrace): Added description of 'filename-display'
variable in 'set/show backtrace' section.
gdb/testsuite/
* gdb.dwarf2/dw2-dir-file-name.exp: New file.
* gdb.dwarf2/dw2-dir-file-name.c: New file.
|
|
* charset.c (intermediate_encoding): Remove unused i.
* completer.c (signal_completer): Remove unused i.
* continuations.c (discard_my_continuations_1): Remove unused
continuation_ptr.
* corelow.c (core_close): Remove unuseD name.
(get_core_siginfo): Remove unused pid.
* cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
i, cps.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
(loclist_describe_location): Remove unused first.
* event-top.c (command_line_handler): Remove unused got_eof.
* exec.c (exec_close_1): Remove unused need_symtab_cleanup.
(resize_section_table): Remove unused old_value.
* gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
* gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
* i386-tdep.c (i386_process_record): Remove unused rex.
* infcmd.c (get_return_value): Remove unused uiout.
* jv-lang.c (type_from_class): Remove unused is_array.
* jv-valprint.c (java_val_print): Remove unused i.
* linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
* linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
* m2-typeprint.c (m2_print_type): Remove unused code.
* macroexp.c (get_character_constant): Remove unused body_start.
(macro_stringify): Remove unused result.
* objc-lang.c (find_methods): Remove unused gdbarch.
* objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
* regcache.c (regcache_cooked_read): Remove unused gdbarch.
* stack.c (print_frame_args): Remove unused summary.
* thread.c (thread_apply_command): Remove unused p.
* valarith.c (value_x_unop): Remove unused mangle_ptr.
* valops.c (search_struct_method): Remove unused skip.
* valprint.c (generic_val_print): Remove unused byte_order.
* varobj.c (varobj_update): Remove unused changed.
* cli/cli-cmds.c (complete_command): Remove unused next_item.
(alias_command): Remove unused c.
* mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
* mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
format.
(mi_cmd_data_write_memory): Remove unused word_format.
(mi_cmd_data_write_memory_bytes): Remove unused r.
* python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
p_start, p_end.
* python/python.c (_initialize_python): Remove unused cmd_name, cmd.
* tui/tui-disasm.c (tui_set_disassem_content): Remove unused
line_width.
Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00766.html
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
* ada-lang.c (is_known_support_routine): New variable fullname. Use
access call to verify the symtab_to_fullname result.
* breakpoint.c (print_breakpoint_location, update_static_tracepoint):
Remove NULL check of symtab_to_fullname result.
* cli/cli-cmds.c (edit_command): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
(mi_cmd_file_list_exec_source_files): Likewise.
* python/py-symtab.c (stpy_fullname): Likewise.
* source.c (symtab_to_fullname): Update function comment. Rename
variable r to fd, move it to inner block. Always provide non-NULL
result.
(print_source_lines_base): Remove NULL check of symtab_to_fullname
result.
* stack.c (print_frame): Likewise.
* symtab.c (iterate_over_some_symtabs, find_line_symtab, sources_info):
Likewise.
* tracepoint.c (print_one_static_tracepoint_marker): Likewise.
gdb/doc/
* gdb.texinfo (GDB/MI Data Manipulation) (fullname): Make it always
present.
(GDB/MI File Commands) (-file-list-exec-source-files): Make the
fullname output always present.
gdb/testsuite/
* gdb.mi/mi-fullname-deleted.exp: New file.
|
|
Code cleanup.
* dwarf2read.c (fixup_go_packaging): Do not check symtab->FILENAME for
NULL.
* linespec.c (add_sal_to_sals): Likewise.
* psympriv.h (allocate_psymtab): Add ATTRIBUTE_NONNULL.
* stack.c (print_frame): Do not check symtab->FILENAME for NULL.
* symfile.h (allocate_symtab): Add ATTRIBUTE_NONNULL.
* symtab.h (struct symtab): Add comment it is never NULL for filename.
* tracepoint.c (set_traceframe_context): Do not check symtab->FILENAME
for NULL.
* tui/tui-source.c (tui_set_source_content): Likewise.
|
|
Tom Tromey <tromey@redhat.com>
* dwarf2read.c (read_common_block): Rewrite.
(new_symbol_full): Handle DW_TAG_common_block.
* f-lang.c (head_common_list, find_common_for_function):
Remove.
* f-lang.h (struct common_entry, struct saved_f77_common,
SAVED_F77_COMMON, SAVED_F77_COMMON_PTR, COMMON_ENTRY,
COMMON_ENTRY_PTR, head_common_list, find_common_for_function,
BLANK_COMMON_NAME_LOCAL): Remove.
(struct common_block): New.
* f-valprint.c (list_all_visible_commons): Remove.
(info_common_command_for_block): New function.
(info_common_command): Use it.
* stack.c (iterate_over_block_locals): Special case for
COMMON_BLOCK_DOMAIN.
* symtab.h (enum domain_enum_tag) <COMMON_BLOCK_DOMAIN>: New
constant.
(struct general_symbol_info) <value.common_block>: New field.
(SYMBOL_VALUE_COMMON_BLOCK): New define.
gdb/testsuite
2012-09-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.fortran/common-block.exp: New file.
* gdb.fortran/common-block.f90: New file.
|
|
variable LEN.
* alpha-tdep.c (alpha_extract_return_value): Use TYPE_LENGTH
directly.
(alpha_store_return_value): Likewise.
* amd64-tdep.c (amd64_classify_aggregate): Likewise.
(amd64_push_arguments): Likewise.
* ax-gdb.c (gen_trace_static_fields): Likewise.
(gen_traced_pop): Likewise.
* bfin-tdep.c (bfin_push_dummy_call): Likewise.
* breakpoint.c (update_watchpoint): Likewise.
* findcmd.c (parse_find_args): Use local variable for type
instead of length.
* findvar.c (default_read_var_value): Use TYPE_LENGTH directly.
* h8300-tdep.c (h8300h_extract_return_value): Likewise.
(h8300_store_return_value): Likewise.
* i386-darwin-tdep.c (i386_darwin_push_dummy_call): Likewise.
Use i386_darwin_arg_type_alignment directly.
* infcall.c (call_function_by_hand): Use TYPE_LENGTH directly.
* lm32-tdep.c (lm32_push_dummy_call): Likewise.
* m68hc11-tdep.c (m68hc11_push_dummy_call): Likewise.
(m68hc11_extract_return_value): Likewise.
* mep-tdep.c (mep_push_dummy_call): Likewise.
* printcmd.c (float_type_from_length): Likewise.
* s390-tdep.c (s390_value_from_register): Likewise.
* stack.c (read_frame_arg): Likewise.
* tracepoint.c (encode_actions_1): Likewise.
* valops.c (value_fetch_lazy): Use local variable for type
instead of length. Use TYPE_LENGTH directly.
* value.c (value_contents_equal): Use TYPE_LENGTH directly.
|
|
* breakpoint.c (watchpoint_exp_is_const): Handle UNOP_CAST_TYPE,
UNOP_REINTERPRET_CAST, UNOP_DYNAMIC_CAST.
* c-exp.y (exp): Emit UNOP_MEMVAL_TYPE, UNOP_CAST_TYPE. Update
for changes to UNOP_REINTERPRET_CAST, UNOP_DYNAMIC_CAST. Use
type_exp production where appropriate.
* eval.c (evaluate_subexp_standard) <UNOP_CAST_TYPE>: New case.
<UNOP_DYNAMIC_CAST, UNOP_REINTERPRET_CAST>: Update.
<UNOP_MEMVAL_TYPE>: New case.
(evaluate_subexp_for_address) <UNOP_MEMVAL_TYPE>: New case.
(evaluate_subexp_for_sizeof) <UNOP_MEMVAL_TYPE>: New case.
* expprint.c (print_subexp_standard) <UNOP_CAST_TYPE>: New case.
<UNOP_MEMVAL_TYPE>: New case.
(dump_subexp_body_standard) <UNOP_DYNAMIC_CAST,
UNOP_REINTERPRET_CAST>: Update.
<UNOP_CAST_TYPE, UNOP_MEMVAL_TYPE>: New cases.
* parse.c (operator_length_standard) <UNOP_DYNAMIC_CAST,
UNOP_REINTERPRET_CAST>: Update.
<UNOP_CAST_TYPE, UNOP_MEMVAL_TYPE>: New cases.
* stack.c (return_command): Also check for UNOP_CAST_TYPE.
* std-operator.def (UNOP_CAST_TYPE, UNOP_MEMVAL_TYPE): New
constants.
|
|
PR 11914
* f-valprint.c (info_common_command): New variable frame_id.
Reinitialize FI form FRAME_ID after each print_variable_and_value.
* printcmd.c (print_variable_and_value): Extend function comment.
Add comment for invalidated FRAME.
* stack.c (backtrace_command_1): New variable frame_id. Reinitialize
FI form FRAME_ID after each print_frame_local_vars.
(struct print_variable_and_value_data): Change frame to frame_id.
(do_print_variable_and_value): New variable frame, initialize it from
p->frame_id. Add comment for invalidated FRAME.
(print_frame_local_vars, print_frame_arg_vars): New function comment.
Update CB_DATA.FRAME to CB_DATA.FRAME_ID initialization. Add comment
for invalidated FRAME.
gdb/testsuite/
PR 11914
* gdb.python/py-prettyprint.c (eval_func, eval_sub): New.
(main): Call eval_sub.
* gdb.python/py-prettyprint.exp:
(python execfile ('py-prettyprint.py')): Move it earlier.
New breakpoint for eval-break.
(continue to breakpoint: eval-break, info locals): New test.
(python execfile ('py-prettyprint.py')): Move it from here.
* gdb.python/py-prettyprint.py (class pp_eval_type): New.
(register_pretty_printers): Register pp_eval_type.
|
