| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
gdb 7.12 doesn't compile as C++ (tried with g++ 4.9) on Solaris (tried
10 and 12, sparc and x86). The following patch (relative to the 7.12
release, though I expect most if not all issues to be present on trunk,
too) fixes this.
Only a few of the changes bear explanation:
* Initially, compilation failed whereever defs.h. was included:
In file included from /vol/src/gnu/gdb/gdb-7.12/gdb/gdb.c:19:0:
/vol/src/gnu/gdb/gdb-7.12/gdb/defs.h:630:33: error: 'double atof(const char*)' conflicts with a previous declaration
extern double atof (const char *); /* X3.159-1989 4.10.1.1 */
^
In file included from /usr/include/stdlib.h:17:0,
from build-gnulib/import/stdlib.h:36,
from /vol/src/gnu/gdb/gdb-7.12/gdb/common/common-defs.h:32,
from /vol/src/gnu/gdb/gdb-7.12/gdb/defs.h:28,
from /vol/src/gnu/gdb/gdb-7.12/gdb/gdb.c:19:
/vol/gcc-4.9/lib/gcc/i386-pc-solaris2.10/4.9.0/include-fixed/iso/stdlib_iso.h:119:15: note: previous declaration 'double std::atof(const char*)'
extern double atof(const char *);
^
This is due to this gem in gdb/defs.h which seems to have been present
like forever:
#ifndef atof
extern double atof (const char *); /* X3.159-1989 4.10.1.1 */
#endif
In the Solaris headers, the appropriate functions are in namespace std,
thus the conflict. I've wrapped the defs.h declaration in !__cplusplus
to avoid this; perhaps it can go completely instead.
* All the casts are necessary to appease g++ and should be pretty
obvious.
* The sol-thread.c changes are here to handle
/vol/src/gnu/gdb/gdb-7.12/gdb/sol-thread.c: In function 'void _initialize_sol_thread()':
/vol/src/gnu/gdb/gdb-7.12/gdb/sol-thread.c:1252:36: error: invalid conversion from 'void*' to 'void (*)(int)' [-fpermissive]
if (!(p_##X = dlsym (dlhandle, #X))) \
^
/vol/src/gnu/gdb/gdb-7.12/gdb/sol-thread.c:1255:3: note: in expansion of macro 'resolve'
resolve (td_log);
^
and are modeled after linux-thread-db.c (try_thread_db_load_1).
The patch allowed both 32 and 64-bit C++ builds on sparc-sun-solaris2.10
and i386-pc-solaris2.10 to complete. The resulting binary hasn't seen
more than a smoke test (invoke it on itself, b main, run) yet.
When investigating the failure to detect -static-libstdc++
support (more below), I found two more issues which only show up with
-Werror:
/vol/src/gnu/gdb/gdb/local/gdb/procfs.c: In function 'ssd* proc_get_LDT_entry(procinfo*, int)':
/vol/src/gnu/gdb/gdb/local/gdb/procfs.c:2487:19: error: variable 'old_chain' set but not used [-Werror=unused-but-set-variable]
struct cleanup *old_chain = NULL;
^
Unless I'm mistaken, you need to run do_cleanups on every return from
the function.
Afterwards, I ran a 32-bit compilation, which (after adding
--disable-largefile to avoid
In file included from /usr/include/sys/procfs.h:28:0,
from /vol/src/gnu/gdb/gdb/local/gdb/i386-sol2-nat.c:23:
/usr/include/sys/old_procfs.h:39:2: error: #error "Cannot use procfs in the large file compilation environment"
#error "Cannot use procfs in the large file compilation environment"
^
and two more instances) revealed
/vol/src/gnu/gdb/gdb/local/gdb/top.c: In function 'void gdb_safe_append_history()':
/vol/src/gnu/gdb/gdb/local/gdb/top.c:1170:59: error: format '%d' expects argument of type 'int', but argument 3 has type 'pid_t {aka long int}' [-Werror=format=]
= xstrprintf ("%s-gdb%d~", history_filename, getpid ());
^
Fixed by casting pid_t to long and printing it as such.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
When GDB wants to sync the thread list with the target's (e.g., due to
"info threads"), it calls update_thread_list:
update_thread_list (void)
{
prune_threads ();
target_find_new_threads ();
update_threads_executing ();
}
And then prune_threads does:
prune_threads (void)
{
struct thread_info *tp, *next;
for (tp = thread_list; tp; tp = next)
{
next = tp->next;
if (!thread_alive (tp))
delete_thread (tp->ptid);
}
}
Calling thread_live on each thread one by one is expensive.
E.g., on Linux, it ends up doing kill(SIG0) once for each thread. Not
a big deal, but still a bunch of syscalls...
With the remote target, it's cumbersome. That thread_alive call ends
up generating one T packet per thread:
Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
That seems a bit silly when target_find_new_threads method
implementations will always fetch the whole current set of target
threads, and then add those that are not in GDB's thread list, to
GDB's thread list.
This patch thus pushes down the responsibility of pruning dead threads
to the target_find_new_threads method instead, so a target may
implement pruning dead threads however it wants.
Once we do that, target_find_new_threads becomes a misnomer, so the
patch renames it to target_update_thread_list.
The patch doesn't attempt to do any optimization to any target yet.
It simply exports prune_threads, and makes all implementations of
target_update_thread_list call that. It's meant to be a no-op.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* ada-tasks.c (print_ada_task_info, task_command_1): Adjust.
* bsd-uthread.c (bsd_uthread_find_new_threads): Rename to ...
(bsd_uthread_update_thread_list): ... this. Call prune_threads.
(bsd_uthread_target): Adjust.
* corelow.c (core_open): Adjust.
* dec-thread.c (dec_thread_find_new_threads): Update comment.
(dec_thread_update_thread_list): New function.
(init_dec_thread_ops): Adjust.
* gdbthread.h (prune_threads): New declaration.
* linux-thread-db.c (thread_db_find_new_threads): Rename to ...
(thread_db_update_thread_list): ... this. Call prune_threads.
(init_thread_db_ops): Adjust.
* nto-procfs.c (procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
(procfs_attach, procfs_create_inferior, init_procfs_targets):
Adjust.
* obsd-nat.c (obsd_find_new_threads): Rename to ...
(obsd_update_thread_list): ... this. Call prune_threads.
(obsd_add_target): Adjust.
* procfs.c (procfs_target): Adjust.
(procfs_notice_thread): Update comment.
(procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
* ravenscar-thread.c (ravenscar_update_inferior_ptid): Update
comment.
(ravenscar_wait): Adjust.
(ravenscar_find_new_threads): Rename to ...
(ravenscar_update_thread_list): ... this. Call prune_threads.
(init_ravenscar_thread_ops): Adjust.
* record-btrace.c (record_btrace_find_new_threads): Rename to ...
(record_btrace_update_thread_list): ... this. Adjust comment.
(init_record_btrace_ops): Adjust.
* remote.c (remote_threads_info): Rename to ...
(remote_update_thread_list): ... this. Call prune_threads.
(remote_start_remote, extended_remote_attach_1, init_remote_ops):
Adjust.
* sol-thread.c (check_for_thread_db): Adjust.
(sol_find_new_threads_callback): Rename to ...
(sol_update_thread_list_callback): ... this.
(sol_find_new_threads): Rename to ...
(sol_update_thread_list): ... this. Call prune_threads. Adjust.
(sol_get_ada_task_ptid, init_sol_thread_ops): Adjust.
* target-delegates.c: Regenerate.
* target.c (target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* target.h (struct target_ops): Rename to_find_new_threads field
to to_update_thread_list.
(target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* thread.c (prune_threads): Make extern.
(update_thread_list): Adjust.
|
|
This commit includes string.h in common-defs.h and removes all other
inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include string.h.
* aarch64-tdep.c: Do not include string.h.
* ada-exp.y: Likewise.
* ada-lang.c: Likewise.
* ada-lex.l: Likewise.
* ada-typeprint.c: Likewise.
* ada-valprint.c: Likewise.
* aix-thread.c: Likewise.
* alpha-linux-tdep.c: Likewise.
* alpha-mdebug-tdep.c: Likewise.
* alpha-nat.c: Likewise.
* alpha-osf1-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* alphanbsd-tdep.c: Likewise.
* amd64-dicos-tdep.c: Likewise.
* amd64-linux-tdep.c: Likewise.
* amd64-nat.c: Likewise.
* amd64-sol2-tdep.c: Likewise.
* amd64fbsd-tdep.c: Likewise.
* amd64obsd-tdep.c: Likewise.
* arch-utils.c: Likewise.
* arm-linux-nat.c: Likewise.
* arm-linux-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* arm-wince-tdep.c: Likewise.
* armbsd-tdep.c: Likewise.
* armnbsd-nat.c: Likewise.
* armnbsd-tdep.c: Likewise.
* armobsd-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* ax-gdb.c: Likewise.
* ax-general.c: Likewise.
* bcache.c: Likewise.
* bfin-tdep.c: Likewise.
* breakpoint.c: Likewise.
* build-id.c: Likewise.
* buildsym.c: Likewise.
* c-exp.y: Likewise.
* c-lang.c: Likewise.
* c-typeprint.c: Likewise.
* c-valprint.c: Likewise.
* charset.c: Likewise.
* cli-out.c: Likewise.
* cli/cli-cmds.c: Likewise.
* cli/cli-decode.c: Likewise.
* cli/cli-dump.c: Likewise.
* cli/cli-interp.c: Likewise.
* cli/cli-logging.c: Likewise.
* cli/cli-script.c: Likewise.
* cli/cli-setshow.c: Likewise.
* cli/cli-utils.c: Likewise.
* coffread.c: Likewise.
* common/agent.c: Likewise.
* common/buffer.c: Likewise.
* common/buffer.h: Likewise.
* common/common-utils.c: Likewise.
* common/filestuff.c: Likewise.
* common/filestuff.c: Likewise.
* common/format.c: Likewise.
* common/print-utils.c: Likewise.
* common/rsp-low.c: Likewise.
* common/signals.c: Likewise.
* common/vec.h: Likewise.
* common/xml-utils.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-name-parser.y: Likewise.
* cp-support.c: Likewise.
* cp-valprint.c: Likewise.
* cris-tdep.c: Likewise.
* d-exp.y: Likewise.
* darwin-nat.c: Likewise.
* dbxread.c: Likewise.
* dcache.c: Likewise.
* demangle.c: Likewise.
* dicos-tdep.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dsrec.c: Likewise.
* dummy-frame.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* elfread.c: Likewise.
* environ.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* exceptions.c: Likewise.
* exec.c: Likewise.
* expprint.c: Likewise.
* f-exp.y: Likewise.
* f-lang.c: Likewise.
* f-typeprint.c: Likewise.
* f-valprint.c: Likewise.
* fbsd-nat.c: Likewise.
* findcmd.c: Likewise.
* findvar.c: Likewise.
* fork-child.c: Likewise.
* frame.c: Likewise.
* frv-linux-tdep.c: Likewise.
* frv-tdep.c: Likewise.
* gdb.c: Likewise.
* gdb_bfd.c: Likewise.
* gdbarch.c: Likewise.
* gdbarch.sh: Likewise.
* gdbtypes.c: Likewise.
* gnu-nat.c: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-exp.y: Likewise.
* go-lang.c: Likewise.
* go32-nat.c: Likewise.
* guile/guile.c: Likewise.
* guile/scm-auto-load.c: Likewise.
* hppa-hpux-tdep.c: Likewise.
* hppa-linux-nat.c: Likewise.
* hppanbsd-tdep.c: Likewise.
* hppaobsd-tdep.c: Likewise.
* i386-cygwin-tdep.c: Likewise.
* i386-dicos-tdep.c: Likewise.
* i386-linux-tdep.c: Likewise.
* i386-nto-tdep.c: Likewise.
* i386-sol2-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* i386bsd-tdep.c: Likewise.
* i386gnu-nat.c: Likewise.
* i386nbsd-tdep.c: Likewise.
* i386obsd-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* ia64-libunwind-tdep.c: Likewise.
* ia64-linux-nat.c: Likewise.
* inf-child.c: Likewise.
* inf-ptrace.c: Likewise.
* inf-ttrace.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* inflow.c: Likewise.
* infrun.c: Likewise.
* interps.c: Likewise.
* iq2000-tdep.c: Likewise.
* irix5-nat.c: Likewise.
* jv-exp.y: Likewise.
* jv-lang.c: Likewise.
* jv-typeprint.c: Likewise.
* jv-valprint.c: Likewise.
* language.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Likewise.
* lm32-tdep.c: Likewise.
* m2-exp.y: Likewise.
* m2-typeprint.c: Likewise.
* m32c-tdep.c: Likewise.
* m32r-linux-nat.c: Likewise.
* m32r-linux-tdep.c: Likewise.
* m32r-rom.c: Likewise.
* m32r-tdep.c: Likewise.
* m68hc11-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m68kbsd-tdep.c: Likewise.
* m68klinux-nat.c: Likewise.
* m68klinux-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* machoread.c: Likewise.
* macrocmd.c: Likewise.
* main.c: Likewise.
* mdebugread.c: Likewise.
* mem-break.c: Likewise.
* memattr.c: Likewise.
* memory-map.c: Likewise.
* mep-tdep.c: Likewise.
* mi/mi-cmd-break.c: Likewise.
* mi/mi-cmd-disas.c: Likewise.
* mi/mi-cmd-env.c: Likewise.
* mi/mi-cmd-stack.c: Likewise.
* mi/mi-cmd-var.c: Likewise.
* mi/mi-cmds.c: Likewise.
* mi/mi-console.c: Likewise.
* mi/mi-getopt.c: Likewise.
* mi/mi-interp.c: Likewise.
* mi/mi-main.c: Likewise.
* mi/mi-parse.c: Likewise.
* microblaze-rom.c: Likewise.
* microblaze-tdep.c: Likewise.
* mingw-hdep.c: Likewise.
* minidebug.c: Likewise.
* minsyms.c: Likewise.
* mips-irix-tdep.c: Likewise.
* mips-linux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* mips64obsd-tdep.c: Likewise.
* mipsnbsd-tdep.c: Likewise.
* mipsread.c: Likewise.
* mn10300-linux-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* monitor.c: Likewise.
* moxie-tdep.c: Likewise.
* mt-tdep.c: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-procfs.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/linux-waitpid.c: Likewise.
* nbsd-tdep.c: Likewise.
* nios2-linux-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* nto-tdep.c: Likewise.
* objc-lang.c: Likewise.
* objfiles.c: Likewise.
* opencl-lang.c: Likewise.
* osabi.c: Likewise.
* osdata.c: Likewise.
* p-exp.y: Likewise.
* p-lang.c: Likewise.
* p-typeprint.c: Likewise.
* parse.c: Likewise.
* posix-hdep.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* ppcfbsd-tdep.c: Likewise.
* ppcnbsd-tdep.c: Likewise.
* ppcobsd-tdep.c: Likewise.
* printcmd.c: Likewise.
* procfs.c: Likewise.
* prologue-value.c: Likewise.
* python/py-auto-load.c: Likewise.
* python/py-gdb-readline.c: Likewise.
* ravenscar-thread.c: Likewise.
* regcache.c: Likewise.
* registry.c: Likewise.
* remote-fileio.c: Likewise.
* remote-m32r-sdi.c: Likewise.
* remote-mips.c: Likewise.
* remote-notif.c: Likewise.
* remote-sim.c: Likewise.
* remote.c: Likewise.
* reverse.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* ser-base.c: Likewise.
* ser-go32.c: Likewise.
* ser-mingw.c: Likewise.
* ser-pipe.c: Likewise.
* ser-tcp.c: Likewise.
* ser-unix.c: Likewise.
* serial.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* shnbsd-tdep.c: Likewise.
* skip.c: Likewise.
* sol-thread.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-frv.c: Likewise.
* solib-osf.c: Likewise.
* solib-som.c: Likewise.
* solib-spu.c: Likewise.
* solib-target.c: Likewise.
* solib.c: Likewise.
* somread.c: Likewise.
* source.c: Likewise.
* sparc-nat.c: Likewise.
* sparc-sol2-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* sparc64fbsd-tdep.c: Likewise.
* sparc64nbsd-tdep.c: Likewise.
* sparcnbsd-tdep.c: Likewise.
* spu-linux-nat.c: Likewise.
* spu-multiarch.c: Likewise.
* spu-tdep.c: Likewise.
* stabsread.c: Likewise.
* stack.c: Likewise.
* std-regs.c: Likewise.
* symfile.c: Likewise.
* symmisc.c: Likewise.
* symtab.c: Likewise.
* target.c: Likewise.
* thread.c: Likewise.
* tilegx-linux-nat.c: Likewise.
* tilegx-tdep.c: Likewise.
* top.c: Likewise.
* tracepoint.c: Likewise.
* tui/tui-command.c: Likewise.
* tui/tui-data.c: Likewise.
* tui/tui-disasm.c: Likewise.
* tui/tui-file.c: Likewise.
* tui/tui-layout.c: Likewise.
* tui/tui-out.c: Likewise.
* tui/tui-regs.c: Likewise.
* tui/tui-source.c: Likewise.
* tui/tui-stack.c: Likewise.
* tui/tui-win.c: Likewise.
* tui/tui-windata.c: Likewise.
* tui/tui-winsource.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* ui-out.c: Likewise.
* user-regs.c: Likewise.
* utils.c: Likewise.
* v850-tdep.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* vax-tdep.c: Likewise.
* vaxnbsd-tdep.c: Likewise.
* vaxobsd-tdep.c: Likewise.
* windows-nat.c: Likewise.
* xcoffread.c: Likewise.
* xml-support.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-linux-nat.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include string.h.
* event-loop.c: Likewise.
* linux-low.c: Likewise.
* regcache.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
|
|
This patch cleans up some minor inconsistencies in target delegation.
It's primary purpose is to avoid confusion in the code. A few spots
were checking the "beneath" target; however this can only be NULL for
the dummy target, so such tests are not needed. Some other spots were
iterating over the beneath targets, looking for a method
implementation. This is not needed for methods handled by
make-target-delegates, as there is always an implementation.
2014-07-18 Tom Tromey <tromey@redhat.com>
PR gdb/17130:
* spu-multiarch.c (spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Simplify delegation.
* linux-thread-db.c (thread_db_pid_to_str): Always delegate.
* windows-nat.c (windows_xfer_partial): Always delegate.
* record-btrace.c (record_btrace_xfer_partial): Simplify
delegation.
(record_btrace_fetch_registers, record_btrace_store_registers)
(record_btrace_prepare_to_store, record_btrace_resume)
(record_btrace_wait, record_btrace_find_new_threads)
(record_btrace_thread_alive): Likewise.
* procfs.c (procfs_xfer_partial): Always delegate.
* corelow.c (core_xfer_partial): Always delegate.
* sol-thread.c (sol_find_new_threads): Simplify delegation.
|
|
Some updates where needed after the minimal symbol handling got changed
a little. This patch makes those changes.
gdb/ChangeLog:
* sol-thread.c: #include "symtab.h", "minsym.h" and "objfiles.h".
(ps_pglobal_lookup): Use BMSYMBOL_VALUE_ADDRESS instead of
SYMBOL_VALUE_ADDRESS.
(info_cb): MSYMBOL_PRINT_NAME instead of SYMBOL_PRINT_NAME.
|
|
This patch changes a few minimal symbol lookup functions to return a
bound_minimal_symbol rather than a pointer to the minsym. This change
helps prepare gdb for computing a minimal symbol's address at the
point of use.
Note that this changes even those functions that ostensibly search a
single objfile. That was necessary because, in fact, those functions
can search an objfile and its separate debug objfiles; and it is
important for the caller to know in which objfile the minimal symbol
was actually found.
The bulk of this patch is mechanical.
2014-02-26 Tom Tromey <tromey@redhat.com>
* ada-lang.c (ada_update_initial_language): Update.
(ada_main_name, ada_has_this_exception_support): Update.
* ada-tasks.c (ada_tasks_inferior_data_sniffer): Update.
* aix-thread.c (pdc_symbol_addrs, pd_enable): Update.
* arm-tdep.c (arm_skip_stub): Update.
* auxv.c (ld_so_xfer_auxv): Update.
* avr-tdep.c (avr_scan_prologue): Update.
* ax-gdb.c (gen_var_ref): Update.
* breakpoint.c (struct breakpoint_objfile_data)
<overlay_msym, longjmp_msym, terminate_msym, exception_msym>: Change
type to bound_minimal_symbol.
(create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint): Update.
* bsd-uthread.c (bsd_uthread_lookup_address): Update.
* c-exp.y (classify_name): Update.
* coffread.c (coff_symfile_read): Update.
* common/agent.c (agent_look_up_symbols): Update.
* d-lang.c (d_main_name): Update.
* dbxread.c (find_stab_function_addr, end_psymtab): Update.
* dec-thread.c (enable_dec_thread): Update.
* dwarf2loc.c (call_site_to_target_addr): Update.
* elfread.c (elf_gnu_ifunc_resolve_by_got): Update.
* eval.c (evaluate_subexp_standard): Update.
* findvar.c (struct minsym_lookup_data) <result>: Change type
to bound_minimal_symbol.
<objfile>: Remove.
(minsym_lookup_iterator_cb, default_read_var_value): Update.
* frame.c (inside_main_func): Update.
* frv-tdep.c (frv_frame_this_id): Update.
* gcore.c (call_target_sbrk): Update.
* glibc-tdep.c (glibc_skip_solib_resolver): Update.
* gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline):
Update.
* go-lang.c (go_main_name): Update.
* hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code)
(hppa_hpux_find_import_stub_for_addr): Update.
* hppa-tdep.c (hppa_extract_17, hppa_lookup_stub_minimal_symbol):
Update. Change return type.
* hppa-tdep.h (hppa_lookup_stub_minimal_symbol): Change return
type.
* jit.c (jit_breakpoint_re_set_internal): Update.
* linux-fork.c (inferior_call_waitpid, checkpoint_command):
Update.
* linux-nat.c (get_signo): Update.
* linux-thread-db.c (inferior_has_bug): Update
* m32c-tdep.c (m32c_return_value)
(m32c_m16c_address_to_pointer): Update.
* m32r-tdep.c (m32r_frame_this_id): Update.
* m68hc11-tdep.c (m68hc11_get_register_info): Update.
* machoread.c (macho_resolve_oso_sym_with_minsym): Update.
* minsyms.c (lookup_minimal_symbol_internal): Rename to
lookup_minimal_symbol. Change return type.
(lookup_minimal_symbol): Remove.
(lookup_bound_minimal_symbol): Update.
(lookup_minimal_symbol_text): Change return type.
(lookup_minimal_symbol_solib_trampoline): Change return type.
* minsyms.h (lookup_minimal_symbol, lookup_minimal_symbol_text)
(lookup_minimal_symbol_solib_trampoline): Change return type.
* mips-linux-tdep.c (mips_linux_skip_resolver): Update.
* objc-lang.c (lookup_objc_class, lookup_child_selector)
(value_nsstring, find_imps): Update.
* obsd-tdep.c (obsd_skip_solib_resolver): Update.
* p-lang.c (pascal_main_name): Update.
* ppc-linux-tdep.c (ppc_linux_spe_context_lookup): Update.
* ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update.
* proc-service.c (ps_pglobal_lookup): Update.
* ravenscar-thread.c (get_running_thread_msymbol): Change
return type.
(has_ravenscar_runtime, get_running_thread_id): Update.
* remote.c (remote_check_symbols): Update.
* sol-thread.c (ps_pglobal_lookup): Update.
* sol2-tdep.c (sol2_skip_solib_resolver): Update.
* solib-dsbt.c (lm_base): Update.
* solib-frv.c (lm_base, frv_relocate_section_addresses):
Update.
* solib-irix.c (locate_base): Update.
* solib-som.c (som_solib_create_inferior_hook)
(som_solib_desire_dynamic_linker_symbols, link_map_start):
Update.
* solib-spu.c (spu_enable_break): Update.
* solib-svr4.c (elf_locate_base, enable_break): Update.
* spu-tdep.c (spu_get_overlay_table, spu_catch_start)
(flush_ea_cache): Update.
* stabsread.c (define_symbol): Update.
* symfile.c (simple_read_overlay_table): Update.
* symtab.c (find_pc_sect_line): Update.
* tracepoint.c (scope_info): Update.
* tui-disasm.c (tui_get_begin_asm_address): Update.
* value.c (value_static_field): Update.
|
|
2014-02-19 Tom Tromey <tromey@redhat.com>
* windows-nat.c (windows_get_ada_task_ptid): Add 'self' argument.
* target.h (struct target_ops) <to_get_ada_task_ptid>: Add
argument.
(target_get_ada_task_ptid): Add argument.
* target.c (update_current_target): Update.
(default_get_ada_task_ptid): Add 'self' argument.
* sol-thread.c (sol_get_ada_task_ptid): Add 'self' argument.
* remote.c (remote_get_ada_task_ptid): Add 'self' argument.
* ravenscar-thread.c (ravenscar_get_ada_task_ptid): Add 'self'
argument.
* linux-thread-db.c (thread_db_get_ada_task_ptid): Add 'self'
argument.
* inf-ttrace.c (inf_ttrace_get_ada_task_ptid): Add 'self'
argument.
* dec-thread.c (dec_thread_get_ada_task_ptid): Add 'self'
argument.
* darwin-nat.c (darwin_get_ada_task_ptid): Add 'self' argument.
* aix-thread.c (aix_thread_get_ada_task_ptid): Add 'self'
argument.
|
|
This patch does the conversion of to_xfer_partial from
LONGEST (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len);
to
enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);
It changes to_xfer_partial return the transfer status and the transfered
length by *XFERED_LEN. Generally, the return status has three stats,
- TARGET_XFER_OK,
- TARGET_XFER_EOF,
- TARGET_XFER_E_XXXX,
See the comments to them in 'enum target_xfer_status'. Note that
Pedro suggested not name TARGET_XFER_DONE, as it is confusing,
compared with "TARGET_XFER_OK". We finally name it TARGET_XFER_EOF.
With this change, GDB core can handle unavailable data in a convenient
way.
The rationale behind this change was mentioned here
https://sourceware.org/ml/gdb-patches/2013-10/msg00761.html
Consider an object/value like this:
0 100 150 200 512
DDDDDDDDDDDxxxxxxxxxDDDDDD...DDIIIIIIIIIIII..III
where D is valid data, and xxx is unavailable data, and I is beyond
the end of the object (Invalid). Currently, if we start the
xfer at 0, requesting, say 512 bytes, we'll first get back 100 bytes.
The xfer machinery then retries fetching [100,512), and gets back
TARGET_XFER_E_UNAVAILABLE. That's sufficient when you're either
interested in either having the whole of the 512 bytes available,
or erroring out. But, in this scenario, we're interested in
the data at [150,512). The problem is that the last
TARGET_XFER_E_UNAVAILABLE gives us no indication where to
start the read next. We'd need something like:
get me [0,512) >>>
<<< here's [0,100), *xfered_len is 100, returns TARGET_XFER_OK
get me [100,512) >>> (**1)
<<< [100,150) is unavailable, *xfered_len is 50, return TARGET_XFER_E_UNAVAILABLE.
get me [150,512) >>>
<<< here's [150,200), *xfered_len is 50, return TARGET_XFER_OK.
get me [200,512) >>>
<<< no more data, return TARGET_XFER_EOF.
This naturally implies pushing down the decision of whether
to return TARGET_XFER_E_UNAVAILABLE or something else
down to the target. (Which kinds of leads back to tfile
itself reading from RO memory from file (though we could
export a function in exec.c for that that tfile delegates to,
instead of re-adding the old code).
Beside this change, we also add a macro TARGET_XFER_STATUS_ERROR_P to
check whether a status is an error or not, to stop using "status < 0".
This patch also eliminates the comparison between status and 0.
No target implementations to to_xfer_partial adapts this new
interface. The interface still behaves as before.
gdb:
2014-02-11 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_error): Rename to ...
(enum target_xfer_status): ... it. New. All users updated.
(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
New.
(TARGET_XFER_STATUS_ERROR_P): New macro.
(target_xfer_error_to_string): Remove declaration.
(target_xfer_status_to_string): Declare.
(target_xfer_partial_ftype): Adjust it.
(struct target_ops) <to_xfer_partial>: Return
target_xfer_status. Add argument xfered_len. Update
comments.
* target.c (target_xfer_error_to_string): Rename to ...
(target_xfer_status_to_string): ... it. New. All callers
updated.
(target_read_live_memory): Likewise. Call target_xfer_partial
instead of target_read.
(memory_xfer_live_readonly_partial): Return
target_xfer_status. Add argument xfered_len.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1): Likewise.
(memory_xfer_partial): Likewise.
(target_xfer_partial): Likewise. Check *XFERED_LEN is set
properly. Update debug message.
(default_xfer_partial, current_xfer_partial): Likewise.
(target_write_partial): Likewise.
(target_read_partial): Likewise. All callers updated.
(read_whatever_is_readable): Likewise.
(target_write_with_progress): Likewise.
(target_read_alloc_1): Likewise.
* aix-thread.c (aix_thread_xfer_partial): Likewise.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
* corefile.c (read_memory): Adjust.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
updated.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise. All
callers updated.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
negative.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
type of 'partial_len' to ULONGEST.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo ): Likewise.
(linux_nat_xfer_partial): Likewise.
(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_bytes_aux): Likewise. All callers
updated.
(remote_write_bytes, remote_read_bytes): Likewise. All
callers updated.
(remote_flash_erase): Likewise. All callers updated.
(remote_write_qxfer): Likewise. All callers updated.
(remote_read_qxfer): Likewise. All callers updated.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
(sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
updated.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise.
(windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
* valprint.c: Replace 'target_xfer_error' with
'target_xfer_status' in comments.
|
|
This patch changes to_xfer_partial's len's type to ULONGEST, and
adjust its implementations.
gdb:
2014-01-14 Yao Qi <yao@codesourcery.com>
* target.h (target_xfer_partial_ftype): Update.
(struct target_ops) <to_xfer_partial>: Change 'len' type to
ULONGEST.
* aix-thread.c (aix_thread_xfer_partial): Change type of
argument 'len' to ULONGEST.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv): Likewise.
(memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_write_inferior): Likewise. Use
'%u'.
(darwin_read_dyld_info): Likewise.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
instead of plongest.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
(ia64_hpux_xfer_partial): Likewise.
* ia64-linux-nat.c (ia64_linux_xfer_partial):
* inf-ptrace.c (inf_ptrace_xfer_partial):
* inf-ttrace.c (inf_ttrace_xfer_partial):
* linux-nat.c (linux_xfer_siginfo): Likewise.
(linux_nat_xfer_partial): Likewise.
(spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
(linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
instead of plongest.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_xfer_partial): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
* rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
declaration.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* target.c (target_read_live_memory): Likewise.
(memory_xfer_live_readonly_partial): Likewise.
(memory_xfer_partial, memory_xfer_partial_1): Likewise.
(target_xfer_partial, default_xfer_partial): Likewise.
(current_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise. Call
pulongest instead of plongest.
(windows_xfer_partial): Likewise.
(windows_xfer_shared_libraries): Likewise.
|
|
|
|
Like on GNU/Linux (linux-thread-db.c), the Solaris solaris-threads
target (handles libthread_db.so) shouldn't be pushed when remote
debugging.
This uses the same predicate used by linux-thread-db.c.
gdb/
2013-12-16 Pedro Alves <palves@redhat.com>
PR 16329
* sol-thread.c (check_for_thread_db): If the target can't run or
isn't a core, return without pushing.
|
|
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
|
|
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
|
|
This patch constifies the target_ops method to_detach.
This is a small cleanup, but also, I think, a bug-prevention fix,
since gdb already acts as if the "args" argument here was const.
In particular, top.c:quit_force calls kill_or_detach via
iterate_over_inferiors. kill_or_detach calls target_detach, passing
the same argument each time. So, if one of these methods was not
const-correct, then kill_or_detach would change its behavior in a
strange way.
I could not build every target I modified in this patch. I've
inspected them all by hand, though. Many targets do not use the
"args" parameter; a couple pass it to atoi; and a few pass it on to
the to_detach method of the target beneath. The only code that
required a real change was in linux-nat.c, and that only needed the
introduction of a temporary variable for const-correctness.
2013-11-08 Tom Tromey <tromey@redhat.com>
* aix-thread.c (aix_thread_detach): Update.
* corelow.c (core_detach): Update.
* darwin-nat.c (darwin_detach): Update.
* dec-thread.c (dec_thread_detach): Update.
* gnu-nat.c (gnu_detach): Update.
* go32-nat.c (go32_detach): Update.
* inf-ptrace.c (inf_ptrace_detach): Update.
* inf-ttrace.c (inf_ttrace_detach): Update.
* linux-fork.c (linux_fork_detach): Update.
* linux-fork.h (linux_fork_detach): Update.
* linux-nat.c (linux_nat_detach): Update. Introduce "tem"
local for const-correctness.
* linux-thread-db.c (thread_db_detach): Update.
* monitor.c (monitor_detach): Update.
* nto-procfs.c (procfs_detach): Update.
* procfs.c (procfs_detach): Update.
* record.c (record_detach): Update.
* record.h (record_detach): Update.
* remote-m32r-sdi.c (m32r_detach): Update.
* remote-mips.c (mips_detach): Update.
* remote-sim.c (gdbsim_detach): Update.
* remote.c (remote_detach_1, remote_detach)
(extended_remote_detach): Update.
* sol-thread.c (sol_thread_detach): Update.
* target.c (target_detach): Make "args" const.
(init_dummy_target): Update.
* target.h (struct target_ops) <to_detach>: Make argument const.
(target_detach): Likewise.
* windows-nat.c (windows_detach): Update.
|
|
Replace TIDGET with ptid_get_lwp.
Replace GET_LWP with ptid_get_lwp.
* aix-thread.c (BUILD_THREAD, BUILD_LWP): Remove.
Replace BUILD_THREAD with ptid_build.
Replace BUILD_LWP with ptid_build.
Replace PIDGET with ptid_get_pid.
Replace TIDGET with ptid_get_lwp.
* alphabsd-nat.c: Replace PIDGET with ptid_get_pid.
* amd64-linux-nat.c: Replace PIDGET with ptid_get_pid.
Replace TIDGET with ptid_get_lwp.
* amd64bsd-nat.c: Replace PIDGET with ptid_get_pid.
* arm-linux-nat.c: Replace PIDGET with ptid_get_pid.
Replace TIDGET with ptid_get_lwp.
Replace GET_LWP with ptid_get_lwp.
* armnbsd-nat.c: Replace PIDGET with ptid_get_pid.
* auxv.c: Likewise.
* breakpoint.c: Likewise.
* common/ptid.c (ptid_is_pid): Condense check for
null_ptid and minus_one_ptid.
(ptid_lwp_p): New function.
(ptid_tid_p): New function.
* common/ptid.h: Update comments for accessors.
(ptid_lwp_p): New prototype.
(ptid_tid_p): New prototype.
* defs.h (PIDGET, TIDGET, MERGEPID): Do not define.
* gcore.c: Replace PIDGET with ptid_get_pid.
* gdbthread.h: Likewise.
* gnu-nat.c: Likewise.
* hppa-linux-nat.c: Replace PIDGET with ptid_get_pid.
Replace TIDGET with ptid_get_lwp.
* hppabsd-nat.c: Replace PIDGET with ptid_get_pid.
* hppanbsd-nat.c: Likewise.
* i386-linux-nat.c: Replace PIDGET with ptid_get_pid.
Replace TIDGET with ptid_get_lwp.
* i386bsd-nat.c: Replace PIDGET with ptid_get_pid.
* ia64-linux-nat.c: Replace PIDGET with ptid_get_pid.
* infcmd.c: Likewise.
* inferior.h: Likewise.
* inflow.c: Likewise.
* infrun.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Replace PIDGET with ptid_get_pid.
Replace GET_PID with ptid_get_pid.
Replace is_lwp with ptid_lwp_p.
Replace GET_LWP with ptid_get_lwp.
Replace BUILD_LWP with ptid_build.
|
|
This removes a few more erroneous calls to add_target. These calls
end up installing the target in a user-visible way; but these targets
are all auto-activated and, I think, should never be explicitly
requested.
I have no way to test these.
* aix-thread.c (_initialize_aix_thread): Use
complete_target_initialization.
* bsd-uthread.c (_initialize_bsd_uthread): Use
complete_target_initialization.
* dec-thread.c (_initialize_dec_thread): Use
complete_target_initialization.
* ravenscar-thread.c (_initialize_ravenscar): Use
complete_target_initialization.
* sol-thread.c (_initialize_sol_thread): Use
complete_target_initialization.
* spu-multiarch.c (_initialize_spu_multiarch): Use
complete_target_initialization.
|
|
The routines in sparc-sol-thread used to be SPARC-specific (and
documented as such in the ptrace man page), and therefore hosting them
in a sparc-specific file made sense. However, newer versions of
Solaris now use those callbacks (Solaris 10 Update 10, apparently),
and thus the note about these callbacks being specific to SPARC
was removed.
So this patch deletes sparc-sol-thread.c and moves the code back
inside sol-thread.c.
gdb/ChangeLog:
PR tdep/15420:
* sol-thread.c (ps_lgetxregsize, ps_lgetxregs, ps_lsetxregs):
New functions, directly copied from sparc-sol-thread.c.
* sparc-sol-thread.c: Delete.
* configure.ac: Remove code handling sparc-solaris-thread.c.
* configure: Regenerate.
|
|
This is a minor cleanup that helps avoiding duplicating the output
of a command when handling alternative situations.
gdb/ChangeLog:
* sol-thread.c (info_cb): Factorize the code a little.
|
|
This patch does the following:
- Puts the startfunc and "Sleep func" info on the same line;
- Renames "Sleep func" into "sleepfunc" to be consistent with
"startfunc"
- Avoids the use of a '-' as a separate before the "sleepfunc"
output, because the '-' looks odd and out of place when the
"startfunc" field is not printed (ti.ti_startfunc is nul).
- Use a '=' instead of ':' and avoids the space between
the name of the value and its value, mostly to help group
the value with its name.
For the record, this is how the new outout now looks like:
(gdb) maintenance info sol-threads
user thread #1, lwp 1, (active)
system thread #2, lwp 2, (active)
system thread #3, lwp 0, (asleep) sleepfunc=0xff32d9e0
user thread #4, lwp 4, (asleep) startfunc=[...].task_wrapper sleepfunc=0xff3290f0
system thread #5, lwp 7, (active) startfunc=_co_timerset
user thread #6, lwp 8, (active) startfunc=[...].task_wrapper
gdb/ChangeLog:
* sol-thread.c (info_cb): Rework the output of the "maintenance
info sol-threads" command a bit.
|
|
gdb/ChangeLog:
* sol-thread.c (info_cb) [ti.ti_state == TD_THR_SLEEP]:
Replace ti.ti_startfunc by ti.ti_pc.
Probably OK to commit without approval, so will likely do so in the
next few days.
|
|
gdb/ChangeLog:
* sol-thread.c (rw_common): Cast BUF to "gdb_byte *" in calls
to target_write_memory and target_read_memory.
|
|
This fixes a couple of compiler warnings in rw_common when calling
target_read_memory/target_write_memory due to the type of parameter
"buf" (char *) not matching what these function expect (gdb_byte *).
gdb/ChangeLog:
* sol-thread.c (rw_common): Change type of parameter "buf"
to "gdb_byte *".
(ps_pdwrite, ps_ptwrite): Cast parameter "buf" in call to
rw_common to "gdb_byte *" instead of "char *".
|
|
gdb/ChangeLog:
* sol-thread.c (info_cb) [ti.ti_startfunc != 0]: Change type
of local variable msym to const struct bound_minimal_symbol.
Adjust use accordingly.
[ti.ti_state == TD_THR_SLEEP]: Likewise.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
Replace sprintf function calls for char arrays by
calls to xsnprintf calls.
* arm-tdep.c (arm_push_dummy_call): Replace sprintf by xsnprintf.
(arm_dwarf_reg_to_regnum, arm_return_value): Ditto.
(arm_neon_quad_read, arm_pseudo_read): Ditto.
(arm_neon_quad_write, arm_pseudo_write): Ditto.
* breakpoint.c (condition_completer): Ditto.
(create_tracepoint_from_upload): Ditto.
* dwarf2read.c (file_full_name): Ditto.
* gcore.c (gcore_command): Ditto.
* gnu-nat.c (proc_string, gnu_pid_to_str): Ditto.
* go32-nat.c (go32_sysinfo): Ditto.
* interps.c (interp_set): Ditto.
* m32c-tdep.c (make_types): Ditto.
* ppc-linux-nat.c (fetch_register, store_register): Ditto.
* remote-m32r-sdi.c (m32r_open): Ditto.
* sol-thread.c (td_err_string): Ditto.
(td_state_string, solaris_pid_to_str): Ditto.
* symtab.c (gdb_mangle_name): Ditto.
* cli/cli-script.c (execute_control_command): Ditto.
(define_command, document_command): Ditto.
* tui/tui-io.c (tui_rl_display_match_list): Ditto.
* tui/tui-stack.c (tui_make_status_line): Ditto.
* tui/tui-win.c (tui_update_gdb_sizes): Ditto.
|
|
(get_target_gdbarch): Rename to target_gdbarch.
* gdbarch.c, gdbarch.h: Rebuild.
* ada-tasks.c, aix-thread.c, amd64-linux-nat.c, arch-utils.c,
arm-tdep.c, auxv.c, breakpoint.c, bsd-uthread.c, corefile.c,
darwin-nat-info.c, dcache.c, dsrec.c, exec.c, fbsd-nat.c,
filesystem.c, gcore.c, gnu-nat.c, i386-darwin-nat.c, i386-nat.c,
ia64-vms-tdep.c, inf-ptrace.c, infcmd.c, jit.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, m32r-rom.c, memattr.c,
mep-tdep.c, microblaze-tdep.c, mips-linux-nat.c,
mips-linux-tdep.c, mips-tdep.c, monitor.c, moxie-tdep.c,
nto-procfs.c, nto-tdep.c, ppc-linux-nat.c, proc-service.c,
procfs.c, progspace.c, ravenscar-thread.c, record.c,
remote-m32r-sdi.c, remote-mips.c, remote-sim.c, remote.c,
rl78-tdep.c, rs6000-nat.c, rx-tdep.c, s390-nat.c, sol-thread.c,
solib-darwin.c, solib-dsbt.c, solib-frv.c, solib-ia64-hpux.c,
solib-irix.c, solib-pa64.c, solib-som.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, solib.c, spu-linux-nat.c,
spu-multiarch.c, spu-tdep.c, symfile-mem.c, symfile.c, symtab.c,
target-descriptions.c, target.c, target.h, tracepoint.c,
windows-nat.c, windows-tdep.c, xcoffsolib.c, cli/cli-dump.c,
common/agent.c, mi/mi-interp.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/python.c: Update.
|
|
gdb/ChangeLog:
* sol-thread.c (sol_thread_fetch_registers)
(sol_thread_store_registers): Delete commented out code.
|
|
Moving some sparc-specific routines out of sol-thread.c into their
own (new) file.
gdb/ChangeLog:
* sol-thread.c (ps_lgetxregsize, ps_lgetxregs, ps_lsetxregs):
Move these functions to sparc-sol-thread.c.
* sparc-sol-thread.c: New file.
* configure.ac: Add sparc-sol-thread.o to CONFIG_OBS and
sparc-sol-thread.c to CONFIG_SRCS for sparc-solaris native
configurations.
* configure: Regenerate.
|
|
gdb/ChangeLog:
* sol-thread.c (ps_lgetxregsize, ps_lgetxregs, ps_lsetxregs):
Remove commented-out code.
|
|
gdb/ChangeLog:
* sol-thread.c (ps_lgetxregsize, ps_lgetxregs, ps_lsetxregs):
Enable this code for sparc hosts only.
|
|
Add a declaration for procfs_find_LDT_entry in order to prevent
a compiler warning about this function missing one. This also
helps making sure that declaration and definition remain consistent.
gdb/ChangeLog:
* procfs.h (procfs_find_LDT_entry): Add declaration.
* sol-thread.c (ps_lgetLDT): Delete local declaration of
function procfs_find_LDT_entry.
|
|
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
gdb/gdbserver/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
include/gdb/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
sim/common/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
|
|
gdb/ChangeLog:
* sol-thread.c (solaris_pid_to_str): Make static.
(_initialize_sol_thread): Add prototype.
|
|
gdb/ChangeLog:
* sol-thread.c (procfs_pid_to_str): Delete extern declaration.
|
|
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
* arm-tdep.c: Fix typos in comments.
* bsd-uthread.c: Ditto.
* completer.c: Ditto.
* corelow.c: Ditto.
* cp-namespace.c: Ditto.
* cp-support.c: Ditto.
* cris-tdep.c: Ditto.
* dbxread.c: Ditto.
* dwarf2read.c: Ditto.
* frame.h: Ditto.
* gdbtypes.h: Ditto.
* inferior.h: Ditto.
* mdebugread.c: Ditto.
* mips-tdep.c: Ditto.
* ppc-linux-nat.c: Ditto.
* ppc-linux-tdep.c: Ditto.
* printcmd.c: Ditto.
* sol-thread.c: Ditto.
* solib-frv.c: Ditto.
* solist.h: Ditto.
* sparc64-tdep.c: Ditto.
* spu-tdep.c: Ditto.
* stabsread.c: Ditto.
* symfile.c: Ditto.
* valops.c: Ditto.
* varobj.c: Ditto.
* vax-nat.c: Ditto.
* python/py-block.c: Ditto.
* python/py-symbol.c: Ditto.
* python/py-symtab.c: Ditto.
* python/py-value.c: Ditto.
* tui/tui-win.c: Ditto.
|
|
* s390-tdep.c: Comment cleanup, mostly periods and spaces.
* score-tdep.c: Ditto.
* score-tdep.h: Ditto.
* ser-base.c: Ditto.
* ser-go32.c: Ditto.
* serial.c: Ditto.
* serial.h: Ditto.
* ser-mingw.c: Ditto.
* ser-pipe.c: Ditto.
* ser-tcp.c: Ditto.
* ser-unix.c: Ditto.
* sh64-tdep.c: Ditto.
* shnbsd-nat.c: Ditto.
* sh-tdep.c: Ditto.
* sh-tdep.h: Ditto.
* solib.c: Ditto.
* solib-darwin.c: Ditto.
* solib-frv.c: Ditto.
* solib.h: Ditto.
* solib-irix.c: Ditto.
* solib-osf.c: Ditto.
* solib-pa64.c: Ditto.
* solib-som.c: Ditto.
* solib-spu.c: Ditto.
* solib-sunos.c: Ditto.
* solib-svr4.c: Ditto.
* solist.h: Ditto.
* sol-thread.c: Ditto.
* somread.c: Ditto.
* source.c: Ditto.
* source.h: Ditto.
* sparc64-linux-tdep.c: Ditto.
* sparc64-tdep.c: Ditto.
* sparc-linux-nat.c: Ditto.
* sparc-linux-tdep.c: Ditto.
* sparc-sol2-nat.c: Ditto.
* sparc-sol2-tdep.c: Ditto.
* sparc-tdep.c: Ditto.
* sparc-tdep.h: Ditto.
* spu-tdep.c: Ditto.
* stabsread.c: Ditto.
* stabsread.h: Ditto.
* stack.c: Ditto.
* symfile.c: Ditto.
* symfile.h: Ditto.
* symmisc.c: Ditto.
* symtab.c: Ditto.
* symtab.h: Ditto.
* target.c: Ditto.
* target-descriptions.c: Ditto.
* target-descriptions.h: Ditto.
* target.h: Ditto.
* target-memory.c: Ditto.
* terminal.h: Ditto.
* thread.c: Ditto.
* top.c: Ditto.
* tracepoint.c: Ditto.
* tracepoint.h: Ditto.
* trad-frame.h: Ditto.
* typeprint.c: Ditto.
|
|
|
|
* sol-thread.c (thread_db_find_thread_from_tid)
(sol_get_ada_task_ptid): New functions.
(init_sol_thread_ops): Set sol_thread_ops.to_get_ada_task_ptid.
|
|
Automatic update by copyright.sh.
|
|
(paddress): Add GDBARCH parameter.
* utils.c (strlen_paddr, paddr, paddr_nz): Remove.
(paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
* ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
* ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
use it instead of current_gdbarch.
Update calls to ui_out_field_core_addr to pass architecture:
* ada-lang.c (print_one_exception): Update.
* breakpoint.c (print_one_breakpoint_location,
print_one_exception_catchpoint): Update.
* disasm.c (dump_insns): Update.
* darwin-nat-info.c (darwin_debug_regions_recurse): Update.
* mi/mi-main.c (mi_cmd_data_read_memory): Update.
* mi/mi-symbol-cmds.c: Include "objfiles.h".
(mi_cmd_symbol_list_lines): Update.
* stack.c (print_frame_info, print_frame): Update.
Update callers of paddress to pass architecture:
* ada-tasks.c (info_task): Update.
* ada-valprint.c (ada_val_print_1): Update.
* annotate.c (annotate_source, annotate_frame_begin): Update.
* breakpoint.c (insert_bp_location, describe_other_breakpoints,
mention): Update.
* cli/cli-cmds.c (edit_command, list_command, print_disassembly):
Update.
* corefile.c (memory_error): Update.
* c-valprint.c (print_function_pointer_address, c_val_print): Update.
* disasm.c (dis_asm_print_address): Update.
* exec.c (print_section_info): Update.
* f-valprint.c (f_val_print): Update.
* infcmd.c: Include "arch-utils.h".
(jump_command, program_info): Update.
* linux-fork.c: Include "arch-utils.h".
(info_forks_command): Update.
* m2-valprint.c (print_function_pointer_address,
print_unpacked_pointer, print_variable_at_address,
m2_val_print): Update.
* m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
Update.
* printcmd.c (print_address, print_address_demangle, address_info):
Update.
* p-valprint.c (pascal_val_print): Update.
* source.c: Include "arch-utils.h".
(line_info): Update.
* stack.c (frame_info, print_block_frame_labels): Update.
* symfile.c (add_symbol_file_command, list_overlays_command): Update.
* symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
print_symbol, print_partial_symbols, maintenance_info_psymtabs,
maintenance_check_symtabs): Update.
* symtab.c (find_pc_sect_symtab): Update.
* target.c (deprecated_debug_xfer_memory): Update.
* tracepoint.c (scope_info): Update.
* tui/tui-stack.c (tui_make_status_line): Update.
* valprint.c (val_print_string): Update.
Update callers of paddr_nz to use paddress instead (keeping
user-visible output identical):
* alpha-tdep.c (alpha_heuristic_proc_start): Update.
* amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
amd64_displaced_step_fixup): Update.
* arch-utils.c (simple_displaced_step_copy_insn): Update.
* auxv.c (fprint_target_auxv): Update.
* breakpoint.c (insert_single_step_breakpoint): Update.
* buildsym.c (finish_block): Update.
* cli/cli-dump.c (restore_section_callback): Update.
* fbsd-nat.c (fbsd_find_memory_regions): Update.
* frame.c (frame_unwind_register_value): Update.
* gcore.c (gcore_create_callback): Update.
* hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
* i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
i386_record_lea_modrm_addr, i386_record_lea_modrm,
i386_process_record): Update.
* ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
* infrun.c (displaced_step_prepare, displaced_step_fixup,
handle_inferior_event, insert_step_resume_breakpoint_at_sal,
insert_longjmp_resume_breakpoint): Update.
* linux-nat.c (linux_nat_find_memory_regions): Update.
* linux-record.c (record_linux_system_call): Update.
* mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
mips_o64_push_dummy_call): Update.
* monitor.c (monitor_error, monitor_remove_breakpoint): Update.
* record.c (record_arch_list_add_mem, record_wait,
record_xfer_partial): Update.
* remote-mips.c (mips_fetch_word, mips_check_lsi_error,
mips_common_breakpoint): Update.
* remote-sim.c (gdbsim_xfer_inferior_memory): Update.
* rs6000-tdep.c (ppc_displaced_step_fixup): Update.
* solib-som.c (som_current_sos): Update.
* symfile.c (load_progress, generic_load): Update.
* symfile-mem.c (add_vsyscall_page): Update.
* valops.c (value_fetch_lazy): Update.
* windows-tdep.c (windows_xfer_shared_library): Update.
Update callers of paddr_nz to use paddress instead (changing
user-visible output to make it more correct):
* dwarf2loc.c (locexpr_describe_location): Update.
* ia64-tdep.c (ia64_memory_insert_breakpoint,
ia64_memory_remove_breakpoint): Update.
* jv-valprint.c (java_value_print): Update.
* m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
* monitor.c (monitor_read_memory): Update.
Update callers of paddr to use paddress instead (changing
user-visible output to make it more correct):
* arm-tdep.c (arm_push_dummy_call): Update.
* breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
create_breakpoint): Update.
* darwin-nat-info.c (darwin_debug_regions): Update.
* dcache.c (dcache_info): Update.
* dsrec.c (load_srec, make_srec): Update.
* dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
dwarf2_frame_cache): Update.
* gcore.c (gcore_copy_callback): Update.
* gnu-nat.c (gnu_xfer_memory): Update.
* mips-linux-nat.c (mips_show_dr): Update.
* monitor.c (monitor_write_memory, monitor_insert_breakpoint,
monitor_remove_breakpoint): Update.
* remote.c (compare_sections_command): Update.
* remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
m32r_remove_breakpoint, m32r_insert_watchpoint,
m32r_remove_watchpoint): Update.
* sol-thread.c (info_cb): Update.
* symfile.c (load_progress): Update.
Update callers of paddress or paddr_nz to use hex_string instead
(changes output of internal/error/debug messages only):
* dwarf2read.c (dump_die_shallow): Update.
* frame.c (fprint_field, fprint_frame, frame_pc_unwind,
get_frame_func, create_new_frame): Update.
* hppa-tdep.c (find_unwind_entry, unwind_command): Update.
* ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
ia64_get_dyn_info_list): Update.
* maint.c (maintenance_translate_address): Update.
* mi/mi-cmd-var.c (mi_cmd_var_create): Update.
* target.c (target_flash_erase): Update.
Update callers of paddr/paddr_nz to use phex/phex_nz instead,
using an appropriate address size. Remove use of strlen_paddr.
* exec.c (exec_files_info): Update.
* i386-nat.c (i386_show_dr): Update.
* remote.c (remote_flash_erase): Update.
* m32r-rom.c (m32r_load_section): Update.
* monitor.c (monitor_vsprintf, monitor_store_register): Update.
* remote.c (remote_check_symbols, remote_search_memory): Update.
* remote-mips.c (mips_request, mips_common_breakpoint): Update.
* scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
* sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
sh_dsp_show_regs): Update.
* xcoffsolib.c (sharedlibrary_command): Update.
* maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
Use hex_string_custom instead of paddr.
(print_bfd_section_info): Pass address size.
(print_objfile_section_info): Likewise.
* annotate.h (annotate_source): Add GDBARCH parameter.
(annotate_frame_begin): Likewise.
* annotate.c (annotate_source): Add GDBARCH parameter.
(annotate_frame_begin): Likewise.
* source.c (identify_source_line): Update call to annotate_source.
* stack.c (print_frame_info, print_frame): Update call to
annotate_frame_begin.
* breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
(create_breakpoint, create_ada_exception_breakpoint): Update call.
* stack.c (print_block_frame_labels): Add GDBARCH parameter.
(print_frame_label_vars): Update call.
* symmisc.c (print_partial_symbols): Add GDBARCH parameter.
(dump_psymtab): Update call to print_partial_symbols.
(struct print_symbol_args): Add GDBARCH member.
(dump_symtab_1): Set print_symbol_args architecture member.
(print_symbol): Use it.
* windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
parameter.
* windows-tdep.c (windows_xfer_shared_library): Likewise.
* i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
(core_process_module_section): Pass architecture from cpms_data to
windows_xfer_shared_library.
(windows_core_xfer_shared_libraries): Initialize cmps_data
architecture member.
* windows-nat.c (windows_xfer_shared_libraries): Pass architecture
to windows_xfer_shared_library.
* defs.h (print_address): Add GDBARCH parameter.
* printcmd.c (print_address): Add GDBARCH parameter.
(print_scalar_formatted, do_examine): Update call.
* findcmd.c (find_command): Update call.
* tracepoint.c: Include "arch-utils.h".
(trace_find_line_command): Update call.
* tui/tui-disasm.c (tui_disassemble): Update call.
* value.h (print_address_demangle): Add GDBARCH parameter.
* printcmd.c (print_address_demangle): Add GDBARCH parameter.
* c-valprint.c (print_function_pointer_address, c_val_print):
Update call.
* f-valprint.c (f_val_print): Update call.
* gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
* jv-valprint.c (java_val_print): Update call.
* m2-valprint.c (print_function_pointer_address, m2_val_print):
Update call.
* p-valprint.c (pascal_val_print): Update call.
* disasm.c (gdb_disassemble_info): Install architecture into
di.application_data field.
testsuite/ChangeLog:
* gdb.threads/tls-shared.exp: Update to locexpr_describe_location
change to prefix TLS offset in hex with 0x.
doc/ChangeLog:
* gdbint.texinfo (Item Output Functions): Update signature
for ui_out_field_core_addr.
|
|
(target_thread_architecture): New macro.
* target.c (update_current_target): Inherit to_thread_architecture.
(default_thread_architecture): New function.
(debug_to_thread_architecture): New function.
(setup_target_debug): Handle to_thread_architecture.
* regcache.h (get_thread_arch_regcache): New.
* regcache.c (struct regcache_list): New data type.
(current_regcache): Hold regcache list instead of single regcache.
(current_thread_ptid, current_thread_arch): New static variables.
(get_thread_arch_regcache): New function.
(get_thread_regcache): Use it. Call target_thread_architecture.
(regcache_thread_ptid_changed): Update to current_regcache changes.
(registers_changed): Likewise. Reset current_thread_arch and
current_thread_ptid.
* remote.c (remote_wait): Access target registers in target_gdbarch.
* linux-nat.c (linux_nat_do_thread_registers): Likewise.
* proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
* sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
* solib-svr4.c (enable_break): Likewise.
(svr4_relocate_main_executable): Likewise.
|
|
* procfs.h: New.
* proc-utils.h (procfs_first_available): Don't declare here.
* sol-thread.c: Include procfs.h instead of sys/procfs.h and
proc-utils.h.
* procfs.c: Include procfs.h.
(procfs_target): Make it public. Don't register
procfs_can_use_hw_breakpoint here.
(proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
(procfs_can_use_hw_breakpoint): Remove check of
TARGET_HAS_HARDWARE_WATCHPOINTS.
(procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
here.
(_initialize_procfs): Don't add the procfs target here.
* i386-sol2-nat.c: Include target.h and procfs.h.
(_initialize_amd64_sol2_nat): Install the procfs target here,
customized with watchpoints support.
* irix5-nat.c: Include target.h.
(_initialize_core_irix5): Rename to ...
(_initialize_irix5_nat): ... this. Install the procfs target
here, customized with watchpoints support.
* alpha-nat.c: Include procfs.h.
(_initialize_core_alpha): Rename to...
(_initialize_alpha_nat): ... this. Install the procfs target
here, customized with watchpoints support.
* sparc-sol2-nat.c: Include target.h and procfs.h.
(_initialize_sparc_sol2_nat): New.
* config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
* config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
* config/mips/irix5.mh (NAT_FILE): Delete.
* config/mips/irix6.mh (NAT_FILE): Delete.
* config/mips/nm-irix5.h: Delete.
2009-06-07 Pedro Alves <pedro@codesourcery.com>
* gdbint.texinfo (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete all
references.
|
|
* proc-utils.h: ... here.
* sol-thread.c: Include procfs.h and proc-utils.h.
|
|
* target.c (target_wait): Add `options' argument. Adjust.
(struct target_ops) <to_wait>: Add `options' argument.
(target_wait): Add `options' argument.
* infrun.c (wait_for_inferior): Pass 0 as options to
target_wait (blocking wait).
(fetch_inferior_event): Pass TARGET_WNOHANG as options to
target_wait.
* fork-child.c (startup_inferior): Pass 0 as options to
target_wait (blocking wait).
* linux-nat.c (linux_nat_create_inferior): Remove async masking.
(linux_nat_wait_1): Add `target_options' argument. Use it instead
of checking on target_can_async_p.
(linux_nat_wait): Add `target_options' argument. Adjust.
* remote.c (remote_wait_ns): Add `options' argument. Adjust to
check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
(remote_wait_as): Add `options' argument. Adjust to check on
TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
a blocking wait, keep waiting until an interesting event comes
out.
(remote_wait): Add `options' argument. Don't loop here if the
target is in async mode, and a blocking wait has been requested.
* top.c (deprecated_target_wait_hook): Add `options' argument.
* linux-thread-db.c (thread_db_wait): Add `options' argument, and
pass it down to the layer beneath.
* inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
* record.c (record_beneath_to_wait): Add `options' argument.
(record_wait): Add `options' argument, and pass it down to the
layer beneath.
* bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
* darwin-nat.c (darwin_wait): Likewise.
* defs.h (deprecated_target_wait_hook): Likewise.
* gnu-nat.c (gnu_wait): Add `options' argument.
* go32-nat.c (go32_wait): Likewise.
* hpux-thread.c (hpux_thread_wait): Add `options' argument, and
pass it down to the layer beneath.
* inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
* monitor.c (monitor_wait): Likewise.
* nto-procfs.c (procfs_wait): Likewise.
* remote-mips.c (mips_wait): Add `options' argument.
* remote-sim.c (gdbsim_wait): Likewise.
* rs6000-nat.c (rs6000_wait): Add `options' argument.
* sol-thread.c (sol_thread_wait): Add `options' argument, and pass
it down to the layer beneath.
* spu-linux-nat.c (spu_child_wait): Add `options' argument.
* windows-nat.c (windows_wait): Likewise.
* tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
|
|
(core_file_thread_alive): Rename to...
(core_thread_alive): ... this.
(core_pid_to_str): Try gdbarch_core_pid_to_str first.
(init_core_ops): Adjust.
(coreops_suppress_target): Delete.
(_initialize_corelow): Unconditionally add core_ops.
* procfs.c: Include "inf-child.h".
(procfs_ops): Delete.
(init_procfs_ops): Delete. Reimplement as...
(procfs_target): ... this, inheriting from inf-child.
(procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
(procfs_prepare_to_store): Delete.
(procfs_store_registers, procfs_resume): Adjust.
(procfs_open): Delete.
(procfs_suppress_run): Delete.
(procfs_can_run): Delete.
(procfs_mourn_inferior): Adjust.
(procfs_init_inferior): Add target_ops parameter. Adjust.
(procfs_create_inferior): Don't pass procfs_init_inferior to
fork_inferior. Instead call it after fork_inferior returns.
(procfs_find_new_threads): Adjust.
(_initialize_procfs): Adjust to use procfs_target instead of
init_procfs_ops.
* sol-thread.c (orig_core_ops, sol_core_ops): Delete.
(lwp_to_thread): Use target_thread_alive.
(sol_thread_open): Delete.
(sol_thread_attach): Delete.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers): Adjust
to use find_target_beneath.
(sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
(sol_thread_xfer_partial): Adjust to use find_target_beneath.
(sol_thread_files_info, sol_thread_kill_inferior): Delete.
(check_for_thread_db): New.
(sol_thread_notice_signals, sol_thread_create_inferior): Delete.
(sol_thread_new_objfile): Call check_for_thread_db.
(sol_thread_mourn_inferior): Adjust to use find_target_beneath.
(sol_thread_can_run): Delete.
(sol_thread_alive): Adjust to use find_target_beneath.
(sol_thread_stop): Delete.
(rw_common): Use target_write_memory or target_read_memory.
(ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
(ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
(solaris_pid_to_str): Remove check for libthread_db initialization
failing.
(sol_find_new_threads): Remove check for libthread_db
initialization failing, or for an invalid inferior_ptid. Adjust
to use find_target_beneath.
(sol_core_open, sol_core_close, sol_core_detach,
sol_core_files_info, sol_find_memory_regions,
sol_make_note_section, ignore): Delete.
(init_sol_thread_ops): Make it a thread_stratum target. Remove
unneeded callback settings.
(init_sol_core_ops): Delete.
(_initialize_sol_thread): No longer call init_sol_core_ops, set
procfs_suppress_run, or hack with core_ops.
* target.h (struct target_ops): Add a target_ops * parameter to
to_resume, to_fetch_registers, to_store_registers, to_thread_alive
and to_find_new_threads.
(target_fetch_registers, target_store_registers)
(target_thread_alive, target_find_new_threads): Redeclare as
function.
* target.c (update_current_target): Do not inherit or de_fault
to_resume, to_fetch_registers, to_store_registers,
to_thread_alive, to_find_new_threads.
(target_resume): Adjust.
(target_thread_alive, target_find_new_threads): New.
(debug_to_resume, debug_to_fetch_registers): Delete.
(target_fetch_registers): New.
(debug_to_store_registers): Delete.
(target_store_registers): New.
(debug_to_thread_alive, debug_to_find_new_threads): Delete.
(setup_target_debug): Adjust.
* gdbcore.h (core_ops): Delete declaration.
* inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
* gdbarch.sh (core_pid_to_str): New gdbarch callback.
* gdbarch.h, gdbarch.c: Regenerate.
* sol2-tdep.c: Include "inferior.h".
(sol2_core_pid_to_str): New.
* sol2-tdep.h (sol2_core_pid_to_str): Declare.
* amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
* i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
|
|
(linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
* linux-nat.h (thread_db_init): Delete declaration.
* linux-thread-db.c (target_beneath): Delete.
(thread_db_init): Delete.
(thread_db_detach): Use find_target_beneath.
(thread_db_wait): Adjust interface. Use find_target_beneath.
(thread_db_mourn_inferior): Use find_target_beneath.
(thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
(thread_db_async_mask): Delete.
(thread_db_pid_to_str): Adjust interface. Use
find_target_beneath.
(thread_db_get_thread_local_address): Adjust interface. Use
find_target_beneath.
(init_thread_db_ops): Delete references to delete functions.
* target.c (update_current_target): Don't inherit or default
to_wait. Don't inherit to_pid_to_str and
to_get_thread_local_address.
(target_translate_tls_address): Look for a pushed target that
implements to_get_thread_local_address, and use it instead of
checking for target_get_thread_local_address_p.
(target_wait, target_pid_to_str): Reimplement as functions.
(dummy_pid_to_str): New.
(init_dummy_target): Register it.
(debug_to_wait): Delete.
* target.h (struct target_ops): Make to_wait, to_pid_to_str and
to_get_thread_local_address accept a pointer to struct target_ops.
(target_wait): Delete macro, and declare as function.
(target_pid_to_str): Likewise.
(target_get_thread_local_address)
(target_get_thread_local_address_p): Delete.
(noprocess): Add NORETURN and ATTR_NORETURN tags.
* inf-ptrace.c (inf_ptrace_wait): Adjust.
(inf_ptrace_pid_to_str): New.
(inf_ptrace_target): Use inf_ptrace_pid_to_str.
* aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
* bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
* bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
Adjust.
* corelow.c (core_pid_to_str): Adjust.
* darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
* dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
* gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
* go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
* hpux-thread.c (hpux_thread_wait): Adjust.
* inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
* monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
* nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
* procfs.c (procfs_pid_to_str): Adjust.
* remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
* remote-mips.c (mips_wait): Adjust.
* remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
* remote.c (remote_wait, remote_pid_to_str)
(remote_get_thread_local_address): Adjust.
* rs6000-nat.c (rs6000_wait): Adjust.
* sol-thread.c (procfs_pid_to_str): Adjust declaration.
(sol_thread_wait, solaris_pid_to_str): Adjust.
* spu-linux-nat.c (spu_child_wait): Adjust.
* windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
|
|
|
