aboutsummaryrefslogtreecommitdiff
path: root/gdb/serial.c
AgeCommit message (Collapse)AuthorFilesLines
2013-10-10Rename "set/show remotebaud" command into "set/show serial baud"Joel Brobecker1-0/+53
This patch renames the "set/show remotebaud" commands into "set/show serial baud", and moves its implementation into serial.c. It also moves the "baud_rate" global from top.c to serial.c, where the new code is being added (the alternative was to add an include of target.h). And to facilitate the transition to the new setting name, this patch also preserves the old commands, and marks them as deprecated to alert the users of the change. gdb/ChangeLog: * cli/cli-cmds.c (show_baud_rate): Moved to serial.c as serial_baud_show_cmd. (_initialize_cli_cmds): Delete the code creating the "set/show remotebaud" commands. * serial.c (baud_rate): Move here from top.c. (serial_baud_show_cmd): Move here from cli/cli-cmds.c. (_initialize_serial): Create "set/show serial baud" commands. Add "set/show remotebaud" command aliases. * top.c (baud_rate): Moved to serial.c. * NEWS: Document the new "set/show serial baud" commands, replacing "set/show remotebaud". gdb/doc/ChangeLog: * gdb.texinfo: Replace "set remotebaud" and "show remotebaud" by "set serial baud" and "show serial baud" (resp) throughout.
2013-04-19serial_write: change prototype to take a void-pointer buffer.Pedro Alves1-7/+9
While remote.c works with "char *" buffers most of the time, other remote targets have binary-ish-er protocols, and choose to use "unsigned char" throughout, like e.g., remote-mips.c or remote-m32r-sdi.c. That results in -Wpointer-sign warnings in those targets, unless we add casts in calls to serial_write. Since serial_write is only concerned about sending raw host bytes out, and serial_ops->write_prim already works with "void *"/"size_t", a similar interface to the "write" or "send" system calls, I find it natural to change serial_write's prototype accordingly, avoiding the need for casts. Tested on x86_64 Fedora 17, and also by building x86_64-mingw32 and DJGPP/go32 -hosted gdbs. gdb/ 2013-04-19 Pedro Alves <palves@redhat.com> * ser-base.c (ser_base_write): Change prototype -- take 'void *' buffer and size_t size. Adjust. * ser-base.h (ser_base_write): Adjust. * ser-go32.c (cnts): Change type to size_t. (dos_write): Change prototype -- take 'void *' buffer and size_t size. Adjust. (dos_info): Print elements of 'cnts' as unsigned long. * serial.c (serial_write): Likewise. * serial.h (serial_write): Adjust. (struct serial_ops) <write>: Change prototype -- take 'void *' buffer and size_t size. Adjust.
2013-03-07 * breakpoint.c (catch_syscall_split_args): Use skip_spaces.Keith Seitz1-2/+2
(trace_pass_command): Likewise. * cli/cli-cmds.c: Include cli/cli-utils.h. (source_command): Use skip-spaces. (disassemble_command): Likewise. * findcmd.c: Include cli/cli-utils.h. (parse_find_args): Use skip_spaces. * go32-nat.c: Include cli/cli-utils.h. (go32_sldt): Use skip_spaces. (go32_sgdt): Likewise. (go32_sidt): Likewise. (go32_pde): Likewise. (go32_pte): Likewise. (go32_pte_for_address): Likewise. * infcmd.c: Include cli/cli-utils.h. (registers_info): Use skip_spaces. * linux-tdep.c (read_mapping): Use skip_spaces_const. (linux_info_proc): Likewise. * linux-thread-db.c: Include cli/cli-utils.h. (info_auto_load_libthread_db): Use skip_spaces_const. * m32r-rom.c: Include cli/cli-utils.h. (m32r_upload_command): Use skip_spaces. * maint.c: Include cli/cli-utils.h. (maintenance_translate_address): Use skip_spaces. * mi/mi-parse.c: Include cli/cli-utils.h. (mi_parse_argv): Use skip_spaces. (mi_parse): Likewise. * minsyms.c: Include cli/cli-utils.h. (msymbol_hash_iw): Use skip_spaces_const. * objc-lang.c: Include cli/cli-utils.h. (parse_selector): Use skip_spaces. (parse_method): Likewise. * python/python.c: Include cli/cli-utils.h. (python_interactive_command)[HAVE_PYTHON]: Use skip_spaces. (python_command)[HAVE_PYTHON]: Likewise. (python_interactive_command)[!HAVE_PYTHON]: Likewise. * remote-m32r-sdi.c: Include cli/cli-utils.h. (m32r_load): Use skip_spaces. * serial.c: Include cli/cli-utils.h. (serial_open): Use skip_spaces_const. * stack.c: Include cli/cli-utils.h. (parse_frame_specification_1): Use skip_spaces_const. * symfile.c: Include cli/cli-utils.h. (set_ext_lang_command): Use skip_spaces. * symtab.c: Include cli/cli-utils.h. (rbreak_command): Use skip_spaces. * thread.c (thread_name_command): Use skip_spaces. * tracepoint.c (validate_actionline): Use skip_spaces. (encode_actions_1): Likewise. (trace_find_range_command): Likewise. (trace_find_outside_command): Likewise. (trace_dump_actions): Likewise.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker1-1/+1
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-12-20 * serial.c (deprecated_serial_fd): Remove.Tom Tromey1-13/+0
* serial.h (deprecated_serial_fd): Remove.
2012-08-02gdb/Yao Qi1-6/+6
* dwarf2loc.c (entry_values_debug): Add 'unsigned'. (_initialize_dwarf2loc): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * dwarf2loc.h: Update the declaration of 'entry_values_debug'. * dwarf2read.c (dwarf2_die_debug): Add 'unsigned'. (_initialize_dwarf2_read): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * darwin-nat.c (dwarwin_debug_flag): Add 'unsigned'. (_initialize_darwin_inferior): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * frame.c (frame_debug): Add 'unsigned'. (_intialize_frame): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * frame.h: Update the declaration of 'frame_debug'. * gdbtypes.c (overload_debug): Add 'unsigned'. (_initialize_gdbtypes): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * inferior.h: Update declaration of 'debug_infrun'. * infrun.c (debug_infrun): Add 'unsigned'. (_initialize_infrun): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * jit.c (jit_debug): Add 'unsigned'. (_initialize_jit): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * linux-nat.c (debug_linux_nat): Add 'unsigned'. (_initialize_linux_nat): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * linux-thread-db.c (libthread_db_debug): Add 'unsigned'. (_initialize_thread_db): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * machoread.c (mach_o_debug_level): Add 'unsigned'. (_initialize_machoread): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * mi/mi-cmd-var.c: Update the declaration of 'varobjdebug'. * microblaze-tdep.c (microblaze_debug_flag): Add 'unsigned'. (_initialize_microblaze_tdep): Call add_setshow_zuinteger_cmd intead of add_setshow_zinteger_cmd. * mips-tdep.c (mips_debug): Add 'unsigned'. (_initialize_mips_tdep): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * monitor.c (monitor_debug): Add 'unsigned'. (_initialize_remote_monitors): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * observer.c (observer_debug): Add 'unsigned'. (_initialize_observer): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * parse.c (expressiondebug): Add 'unsigned'. (_initialize_parse): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * record.c (record_debug): Add 'unsigned'. (_initialize_record): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * record.h: Update the declaration of 'record_debug'. * stap-probe.c (stap_expression_debug): Add 'unsigned'. (_initialize_stap_probe): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * serial.c (global_serial_debug_p): Add 'unsigned'. (_initialize_serial): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * solib-dsbt.c (solib_dsbt_debug): Add 'unsigned'. (_initialize_dsbt_solib): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * solib-frv.c (solib_frv_debug): Add 'unsigned'. (_initialize_frv_solib): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * target.c (targetdebug): Add 'unsigned'. (initialize_targets): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * valops.c (overload_debug): Add 'unsigned'. * varobj.c (varobjdebug): Add 'unsigned'. (_initialize_varobj): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * xtensa-tdep.c (xtensa_debug_level): Add 'unsigned'. (_initialize_xtensa_tdep): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * arch-utils.h: Remove the declaration of 'gdbarch_debug'. * gdbarch.sh (gdbarch_debug): Add 'unsigned'. (extern void _initialize_gdbarch): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * gdbarch.c, gdbarch.h: Re-generated.
2012-06-132012-06-13 Pedro Alves <palves@redhat.com>Pedro Alves1-0/+35
Partial revert of previous change. * serial.c (scb_base): New global. (serial_for_fd): New. (serial_open, serial_fdopen_ops): Link new serial in open serials chain. (do_serial_close): Unlink serial from the open serials chain.
2012-06-112012-06-11 Pedro Alves <palves@redhat.com>Pedro Alves1-1/+26
* ser-base.c (run_async_handler_and_reschedule): New. (fd_event, push_event): Use it. * serial.c (serial_open, serial_fdopen_ops): Set the initial reference count to 1. (do_serial_close): Set the bufp field to NULL. Use serial_unref instead of xfree. (serial_is_open, serial_ref, serial_unref): New. * serial.h (serial_open): Adjust comment. (serial_is_open): Declare. (serial_close): Adjust comment. (serial_ref, serial_unref) Declare. (struct serial): New field 'refcnt'.
2012-06-112012-06-11 Pedro Alves <palves@redhat.com>Pedro Alves1-188/+0
Remove #if 0'd "connect" command, and unnecessary associated refcounting and serial reuse bits. * serial.h (struct serial): Remove fields 'next' and 'refcnt'. * serial.c (last_serial_opened): Delete. (scb_base): Delete. (serial_open): Adjust. (serial_for_fd): Delete. (serial_fdopen_ops, do_serial_close): Adjust. (serial_fdopen_ops): Adjust.
2012-06-112012-06-11 Pedro Alves <palves@redhat.com>Pedro Alves1-6/+0
* serial.c (do_serial_close): Remove early return when SCB is null.
2012-01-28gdb/Jan Kratochvil1-1/+1
Code cleanup: Make 1440 bytes of data segment read-only. * arch-utils.c (endian_enum): Make it const char *const []. * arm-tdep.c (fp_model_strings, arm_abi_strings, arm_mode_strings): Likewise. * breakpoint.c (always_inserted_enums): Likewise. * cli/cli-cmds.c (script_ext_enums): Likewise. * cli/cli-decode.c (add_setshow_enum_cmd, complete_on_enum): Make the enumlist parameter const char *const *. * cli/cli-decode.h (struct cmd_list_element): Make the enums field const char *const *. * command.h (complete_on_enum, add_setshow_enum_cmd): Make the enumlist parameter const char *const *. * cris-tdep.c (cris_modes): Make it const char *const []. * filesystem.c (target_file_system_kinds): Likewise. * i386-tdep.c (valid_flavors, valid_conventions): Likewise. * infrun.c (follow_fork_mode_kind_names, follow_exec_mode_names) (can_use_displaced_stepping_enum, scheduler_enums) (exec_direction_names): Likewise. * language.c (_initialize_language): Make the type_or_range_names and case_sensitive_names variables const char *const []. * mips-tdep.c (mips_abi_strings): Make it const char *const []. * python/python.c (python_excp_enums): Likewise. * remote.c (interrupt_sequence_modes): Likewise. * rs6000-tdep.c (powerpc_vector_strings): Likewise. * serial.c (logbase_enums): Likewise. * sh-tdep.c (sh_cc_enum): Likewise. * stack.c (print_frame_arguments_choices, print_entry_values_choices): Likewise. * symtab.c (multiple_symbols_modes): Likewise. * tui/tui-win.c (tui_border_kind_enums, tui_border_mode_enums): Likewise. * utils.c (internal_problem_modes): Likewise.
2012-01-04Copyright year update in most files of the GDB Project.Joel Brobecker1-3/+1
gdb/ChangeLog: Copyright year update in most files of the GDB Project.
2011-03-04 * inflow.c (terminal_init_inferior_with_pgrp): Copy ttystate.Ulrich Weigand1-0/+6
(terminal_save_ours): Remove misleading comment. (inflow_inferior_data_cleanup): Free ttystate. (inflow_inferior_exit): Likewise. (copy_terminal_info): Copy ttystate. * serial.c (serial_copy_tty_state): New function. * serial.h (serial_copy_tty_state): Add prototype. (struct serial_ops): Add copy_tty_state callback. * ser-base.c (ser_base_copy_tty_state): New function. * ser-base.h (ser_base_copy_tty_state): Add prototype. * ser-go32.c (dos_copy_tty_state): New function. (dos_ops): Install copy_tty_state callback. * ser-mingw.c (_initialize_ser_windows): Likewise. * ser-pipe.c (_initialize_ser_pipe): Likewise. * ser-unix.c (hardwire_copy_tty_state): New function. (_initialize_ser_hardwire): Install it.
2011-02-272011-02-27 Michael Snyder <msnyder@vmware.com>Michael Snyder1-1/+1
* darwin-nat-info.c: Fix comment typo. * dwarf2expr.h: Ditto. * fbsd-nat.c: Ditto. * fbsd-nat.h: Ditto. * frame-unwind.h: Ditto. * frame.h: Ditto. * hppa-hpux-tdep.c: Ditto. * i386-linux-nat.c: Ditto. * linux-nat.c: Ditto. * nbsd-nat.c: Ditto. * nbsd-nat.h: Ditto. * ppc-linux-tdep.c: Ditto. * serial.c: Ditto. * ui-file.h: Ditto. * tui/tui-winsource.c: Ditto.
2011-01-112011-01-11 Michael Snyder <msnyder@vmware.com>Michael Snyder1-14/+14
* s390-tdep.c: Comment cleanup, mostly periods and spaces. * score-tdep.c: Ditto. * score-tdep.h: Ditto. * ser-base.c: Ditto. * ser-go32.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * ser-mingw.c: Ditto. * ser-pipe.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * sh64-tdep.c: Ditto. * shnbsd-nat.c: Ditto. * sh-tdep.c: Ditto. * sh-tdep.h: Ditto. * solib.c: Ditto. * solib-darwin.c: Ditto. * solib-frv.c: Ditto. * solib.h: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-spu.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solist.h: Ditto. * sol-thread.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * source.h: Ditto. * sparc64-linux-tdep.c: Ditto. * sparc64-tdep.c: Ditto. * sparc-linux-nat.c: Ditto. * sparc-linux-tdep.c: Ditto. * sparc-sol2-nat.c: Ditto. * sparc-sol2-tdep.c: Ditto. * sparc-tdep.c: Ditto. * sparc-tdep.h: Ditto. * spu-tdep.c: Ditto. * stabsread.c: Ditto. * stabsread.h: Ditto. * stack.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target.c: Ditto. * target-descriptions.c: Ditto. * target-descriptions.h: Ditto. * target.h: Ditto. * target-memory.c: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * trad-frame.h: Ditto. * typeprint.c: Ditto.
2011-01-052011-01-05 Michael Snyder <msnyder@vmware.com>Michael Snyder1-4/+9
* addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-01run copyright.sh for 2011.Joel Brobecker1-1/+1
2010-08-20 * serial.h (gdb_pipe, serial_pipe): Declare.Pedro Alves1-15/+51
* serial.c (serial_interface_lookup): Take a const char pointer. (serial_fdopen): Rename to ... (serial_fdopen_ops): ... this. Add an OPS parameter and use it. Call the OPS' fdopen function if there is one. (serial_fdopen): Rewrite as wrapper to serial_fdopen_ops. (serial_pipe): New. (struct serial_ops) <fdopen>: New field. * ser-mingw.c (free_pipe_state): (free_pipe_state): Close output on non-pex pipes. (pipe_windows_fdopen): New. (gdb_pipe): New. (_initialize_ser_windows): Register pipe_windows_fdopen. * ser-go32.c (gdb_pipe): New. * ser-pipe.c (pipe_close): Close file descriptor even if there's no state pointer. (pipe_ops): Delete. (gdb_pipe): New.
2010-05-162010-05-16 Michael Snyder <msnyder@vmware.com>Michael Snyder1-0/+1
* scm-exp.c: White space. * scm-lang.c: White space. * scm-valprint.c: White space. * sentinel-frame.c: White space. * ser-base.c: White space. * ser-go32.c: White space. * serial.c: White space. * ser-mingw.c: White space. * ser-pipe.c: White space. * ser-tcp.c: White space. * ser-unix.c: White space. * solib.c: White space. * solib-darwin.c: White space. * solib-frv.c: White space. * solib-irix.c: White space. * solib-osf.c: White space. * solib-pa64.c: White space. * solib-som.c: White space. * solib-spu.c: White space. * solib-svr4.c: White space. * solib-target.c: White space. * source.c: White space. * stabsread.c: White space. * stack.c: White space. * std-regs.c: White space. * symfile.c: White space. * symmisc.c: White space. * symtab.c: White space.
2010-05-072010-05-06 Michael Snyder <msnyder@vmware.com>Michael Snyder1-1/+0
* serial.c (serial_for_fd): Delete unused variable. * mdebugread.c (psymtab_to_symtab_1): Delete unused variable. * top.c (execute_command): Delete unused variable. (init_main): Delete unused variable. * utils.c (do_fclose_cleanup): Delete unused variable. (do_all_inferior_continuations): Delete unused variable. (initialize_utils): Delete unused variable. (internal_problem_mode): Delete unused global. * frame.c (get_prev_frame): Delete unused global. (get_frame_locals_address): Delete unused global. (get_frame_args_address): Delete unused global.
2010-04-26 * serial.c (serial_write): Handle serial_debug_p akin to serial_read.Doug Evans1-0/+12
2010-01-01Update copyright year in most headers.Joel Brobecker1-1/+2
Automatic update by copyright.sh.
2009-01-03 Updated copyright notices for most files.Joel Brobecker1-1/+1
2008-02-23 Unbreak 'target async'.Vladimir Prus1-4/+4
* serial.c (serial_async): Set the handler function before enabling async mode.
2008-01-01 Updated copyright notices for most files.Daniel Jacobowitz1-1/+1
2007-08-23 Switch the license of all .c files to GPLv3.Joel Brobecker1-4/+2
Switch the license of all .h files to GPLv3. Switch the license of all .cc files to GPLv3.
2007-08-082007-08-08 Jan Kratochvil <jan.kratochvil@redhat.com>Jan Kratochvil1-1/+2
* serial.c (serial_open): Fix the OPEN parameter macro expansion.
2007-04-08 Pass stderr of program run with "target remote |"Vladimir Prus1-0/+1
via gdb_stderr. * serial.c (serial_open): Set error_fd to -1. * serial.h (struct serial): New field error_fd. (struct serial_opts): New field avail. * ser-pipe.c (pipe_open): Create another pair of sockets. Pass stderr to gdb. * ser-mingw.c (pipe_windows_open): Pass PEX_STDERR_TO_PIPE to pex_run. Initialize sd->error_fd. (pipe_avail): New. (_initialize_ser_windows): Hook pipe_avail. * ser-base.c (generic_readchar): Check if there's anything in stderr channel and route that to gdb_stderr.
2007-01-09Copyright updates for 2007.Daniel Jacobowitz1-2/+2
2006-11-042006-11-04 Vladimir Prus <vladimir@codesourcery.com>Vladimir Prus1-1/+4
* serial.c (serial_open): Strip leading spaces from program name when opening pipe.
2006-04-24 * ser-mingw.c: Include <conio.h>.Daniel Jacobowitz1-0/+7
(struct ser_console_state, struct net_windows_state): Add exit_select, have_stopped, thread. (pipe_select_thread, console_select_thread) (net_windows_select_thread): Don't create a local state copy or close stop_select. Exit on exit_select instead of stop_select. Set have_stopped. (console_select_thread): Don't report control keypresses as pending input. (pipe_select_thread): Allow stop_select to interrupt sleeping. (set_console_wait_handle): Create exit_select and have_stopped. Save the thread handle. Check _kbhit before starting a thread. (ser_console_done_wait_handle): New. (ser_console_close): Close new handles. Wait for the thread to exit. (new_windows_select_thread): Assert that an event occurred. (net_windows_wait_handle): Check for pending input before starting a thread. (net_windows_done_wait_handle): New. (net_windows_open): Create exit_select and have_stopped. Save the thread handle. (net_windows_close): Close new handles. Wait for the thread to exit. (_intiialize_ser_windows): Register done_wait_handle methods. * serial.c [USE_WIN32API] (serial_done_wait_handle): New. * serial.h [USE_WIN32API] (struct serial_ops): Add done_wait_handle. [USE_WIN32API] (serial_done_wait_handle): New prototype. * mingw-hdep.c (gdb_select): Use serial_done_wait_handle.
2006-04-11src/gdb/ChangeLog:Jim Blandy1-2/+5
2006-04-11 Jim Blandy <jimb@codesourcery.com> * serial.c (serial_open): Check for special cases at the front of the "device" name before scanning for the ':' that would indicate an IP-based connection.
2006-02-10 * NEWS: Mention native Windows support.Daniel Jacobowitz1-3/+34
* Makefile.in (gdb_select_h, ser_tcp_h): New. (ALLDEPFILES): Add ser-mingw.c. (event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o) (ser-tcp.o, ser-unix.o): Update. (ser-mingw.o): New rule. * configure: Regenerated. * configure.ac: Add ser-mingw.o for mingw32. * ser-mingw.c: New file. * event-loop.c: Include "gdb_select.h". (gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c. * ser-base.c: Include "gdb_select.h". (ser_base_wait_for): Use gdb_select. * serial.c (serial_for_fd): New function. (serial_fdopen): Try "terminal" before "hardwire". Initialize the allocated struct serial. (serial_wait_handle): New function. * serial.h (serial_for_fd, serial_wait_handle): New prototypes. (struct serial_ops) [USE_WIN32API]: Add wait_handle. * gdb_select.h: New file. * ser-tcp.c: Include "ser-tcp.h". Remove unused "ser-unix.h" include. (net_close, net_read_prim, net_write_prim): Make global. (net_open): Likewise. Pass an exception set to select. Whitespace fix. Document why we can not use gdb_select. (_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here. * ser-tcp.h: New file. * inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here. (handle_sigio): Use gdb_select. (initialize_stdin_serial): New function. * terminal.h (initialize_stdin_serial): New prototype. * top.c (gdb_init): Call initialize_stdin_serial. * mingw-hdep.c (gdb_select): New function, moved from gdb_select in event-loop.c. Add exception condition support. Use serial_for_fd and serial_wait_handle. Fix timeout handling. * posix-hdep.c: Include "gdb_select.h". (gdb_select): New function. * remote-st.c (connect_command): Use gdb_select. * ser-unix.c: Include "gdb_select.h". (hardwire_send_break, wait_for): Use gdb_select.
2005-12-17 * breakpoint.c:Eli Zaretskii1-3/+3
* arm-tdep.c: * ia64-tdep.c: * i386-tdep.c: * hpread.c: * hppa-tdep.c: * hppa-hpux-tdep.c: * gnu-nat.c: * gdbtypes.c: * gdbarch.h: * gdbarch.c: * eval.c: * dwarf2read.c: * dbxread.c: * copying: * symfile.c: * stabsread.c: * sh64-tdep.c: * sh-tdep.c: * s390-tdep.c: * rs6000-tdep.c: * remote.c: * remote-mips.c: * mips-tdep.c: * mdebugread.c: * linux-nat.c: * infrun.c: * xcoffread.c: * win32-nat.c: * valops.c: * utils.c: * tracepoint.c: * target.c: * symtab.c: * c-exp.y: * ada-valprint.c: * ada-typeprint.c: * ada-lex.l: * ada-lang.h: * ada-lang.c: * ada-exp.y: * alphafbsd-tdep.c: * alphabsd-tdep.h: * alphabsd-tdep.c: * alphabsd-nat.c: * alpha-tdep.h: * alpha-tdep.c: * alpha-osf1-tdep.c: * alpha-nat.c: * alpha-mdebug-tdep.c: * alpha-linux-tdep.c: * alpha-linux-nat.c: * aix-thread.c: * abug-rom.c: * arch-utils.c: * annotate.h: * annotate.c: * amd64obsd-tdep.c: * amd64obsd-nat.c: * amd64nbsd-tdep.c: * amd64nbsd-nat.c: * amd64fbsd-tdep.c: * amd64fbsd-nat.c: * amd64bsd-nat.c: * amd64-tdep.h: * amd64-tdep.c: * amd64-sol2-tdep.c: * amd64-nat.h: * amd64-nat.c: * amd64-linux-tdep.c: * amd64-linux-nat.c: * alphanbsd-tdep.c: * block.h: * block.c: * bfd-target.h: * bfd-target.c: * bcache.h: * bcache.c: * ax.h: * ax-general.c: * ax-gdb.h: * ax-gdb.c: * avr-tdep.c: * auxv.h: * auxv.c: * armnbsd-tdep.c: * armnbsd-nat.c: * arm-tdep.h: * arm-linux-nat.c: * arch-utils.h: * charset.c: * call-cmds.h: * c-valprint.c: * c-typeprint.c: * c-lang.h: * c-lang.c: * buildsym.h: * buildsym.c: * bsd-uthread.h: * bsd-uthread.c: * bsd-kvm.h: * bsd-kvm.c: * breakpoint.h: * core-regset.c: * core-aout.c: * completer.h: * completer.c: * complaints.h: * complaints.c: * command.h: * coffread.c: * coff-solib.h: * coff-solib.c: * coff-pe-read.h: * coff-pe-read.c: * cli-out.h: * cli-out.c: * charset.h: * dink32-rom.c: * dictionary.h: * dictionary.c: * demangle.c: * defs.h: * dcache.h: * dcache.c: * d10v-tdep.c: * cpu32bug-rom.c: * cp-valprint.c: * cp-support.h: * cp-support.c: * cp-namespace.c: * cp-abi.h: * cp-abi.c: * corelow.c: * corefile.c: * environ.c: * elfread.c: * dwarfread.c: * dwarf2loc.c: * dwarf2expr.h: * dwarf2expr.c: * dwarf2-frame.h: * dwarf2-frame.c: * dve3900-rom.c: * dummy-frame.h: * dummy-frame.c: * dsrec.c: * doublest.h: * doublest.c: * disasm.h: * disasm.c: * fork-child.c: * findvar.c: * fbsd-nat.h: * fbsd-nat.c: * f-valprint.c: * f-typeprint.c: * f-lang.h: * f-lang.c: * expression.h: * expprint.c: * exec.h: * exec.c: * exceptions.h: * exceptions.c: * event-top.h: * event-top.c: * event-loop.h: * event-loop.c: * gdb.c: * gdb-stabs.h: * gdb-events.h: * gdb-events.c: * gcore.c: * frv-tdep.h: * frv-tdep.c: * frv-linux-tdep.c: * frame.h: * frame.c: * frame-unwind.h: * frame-unwind.c: * frame-base.h: * frame-base.c: * gdb_vfork.h: * gdb_thread_db.h: * gdb_string.h: * gdb_stat.h: * gdb_regex.h: * gdb_ptrace.h: * gdb_proc_service.h: * gdb_obstack.h: * gdb_locale.h: * gdb_dirent.h: * gdb_curses.h: * gdb_assert.h: * gdbarch.sh: * gdb.h: * hpux-thread.c: * hppabsd-nat.c: * hppa-tdep.h: * hpacc-abi.c: * h8300-tdep.c: * gregset.h: * go32-nat.c: * gnu-v3-abi.c: * gnu-v2-abi.h: * gnu-v2-abi.c: * gnu-nat.h: * glibc-tdep.c: * gdbtypes.h: * gdbcore.h: * gdbcmd.h: * i386nbsd-tdep.c: * i386nbsd-nat.c: * i386gnu-tdep.c: * i386gnu-nat.c: * i386fbsd-tdep.c: * i386fbsd-nat.c: * i386bsd-tdep.c: * i386bsd-nat.h: * i386bsd-nat.c: * i386-tdep.h: * i386-sol2-nat.c: * i386-nto-tdep.c: * i386-nat.c: * i386-linux-tdep.h: * i386-linux-tdep.c: * i386-linux-nat.c: * i386-cygwin-tdep.c: * inf-ttrace.c: * inf-ptrace.h: * inf-ptrace.c: * inf-loop.h: * inf-loop.c: * inf-child.h: * inf-child.c: * ia64-tdep.h: * ia64-linux-nat.c: * i387-tdep.h: * i387-tdep.c: * i386v4-nat.c: * i386v-nat.c: * i386obsd-tdep.c: * i386obsd-nat.c: * kod.c: * jv-valprint.c: * jv-typeprint.c: * jv-lang.h: * jv-lang.c: * irix5-nat.c: * iq2000-tdep.c: * interps.h: * interps.c: * inftarg.c: * inflow.h: * inflow.c: * inferior.h: * infcmd.c: * infcall.h: * infcall.c: * inf-ttrace.h: * m32r-tdep.h: * m32r-tdep.c: * m32r-rom.c: * m32r-linux-tdep.c: * m32r-linux-nat.c: * m2-valprint.c: * m2-typeprint.c: * m2-lang.h: * m2-lang.c: * lynx-nat.c: * linux-thread-db.c: * linux-nat.h: * linespec.c: * libunwind-frame.h: * libunwind-frame.c: * language.h: * language.c: * macroexp.c: * macrocmd.c: * m88kbsd-nat.c: * m88k-tdep.h: * m88k-tdep.c: * m68klinux-tdep.c: * m68klinux-nat.c: * m68kbsd-tdep.c: * m68kbsd-nat.c: * m68k-tdep.h: * m68k-tdep.c: * mips-linux-nat.c: * mips-irix-tdep.c: * minsyms.c: * memattr.h: * memattr.c: * mem-break.c: * mdebugread.h: * main.h: * main.c: * macrotab.h: * macrotab.c: * macroscope.h: * macroscope.c: * macroexp.h: * nbsd-tdep.c: * mt-tdep.c: * monitor.h: * monitor.c: * mn10300-tdep.h: * mn10300-tdep.c: * mn10300-linux-tdep.c: * mipsv4-nat.c: * mipsread.c: * mipsnbsd-tdep.h: * mipsnbsd-tdep.c: * mipsnbsd-nat.c: * mips64obsd-tdep.c: * mips64obsd-nat.c: * mips-tdep.h: * mips-mdebug-tdep.c: * mips-linux-tdep.c: * osabi.h: * osabi.c: * ocd.h: * ocd.c: * observer.c: * objfiles.h: * objfiles.c: * objc-lang.h: * objc-lang.c: * objc-exp.y: * nto-tdep.h: * nto-tdep.c: * nto-procfs.c: * nlmread.c: * nbsd-tdep.h: * ppcobsd-tdep.c: * ppcobsd-nat.c: * ppcnbsd-tdep.h: * ppcnbsd-tdep.c: * ppcnbsd-nat.c: * ppcbug-rom.c: * ppc-tdep.h: * ppc-sysv-tdep.c: * ppc-linux-tdep.c: * ppc-linux-nat.c: * ppc-bdm.c: * parser-defs.h: * parse.c: * p-valprint.c: * p-typeprint.c: * p-lang.h: * p-lang.c: * remote-fileio.h: * remote-fileio.c: * remote-est.c: * remote-e7000.c: * regset.h: * regset.c: * reggroups.h: * reggroups.c: * regcache.h: * regcache.c: * proc-why.c: * proc-service.c: * proc-events.c: * printcmd.c: * ppcobsd-tdep.h: * sentinel-frame.h: * sentinel-frame.c: * scm-valprint.c: * scm-tags.h: * scm-lang.h: * scm-lang.c: * scm-exp.c: * s390-tdep.h: * rom68k-rom.c: * remote.h: * remote-utils.c: * remote-st.c: * remote-sim.c: * remote-sds.c: * remote-rdp.c: * remote-rdi.c: * remote-hms.c: * sim-regno.h: * shnbsd-tdep.h: * shnbsd-tdep.c: * shnbsd-nat.c: * sh-tdep.h: * serial.h: * serial.c: * ser-unix.h: * ser-unix.c: * ser-tcp.c: * ser-pipe.c: * ser-go32.c: * ser-e7kpc.c: * ser-base.h: * ser-base.c: * solib.c: * solib-svr4.h: * solib-svr4.c: * solib-sunos.c: * solib-som.h: * solib-som.c: * solib-pa64.h: * solib-pa64.c: * solib-osf.c: * solib-null.c: * solib-legacy.c: * solib-irix.c: * solib-frv.c: * solib-aix5.c: * sol-thread.c: * sparc64-linux-tdep.c: * sparc64-linux-nat.c: * sparc-tdep.h: * sparc-tdep.c: * sparc-sol2-tdep.c: * sparc-sol2-nat.c: * sparc-nat.h: * sparc-nat.c: * sparc-linux-tdep.c: * sparc-linux-nat.c: * source.h: * source.c: * somread.c: * solist.h: * solib.h: * std-regs.c: * stack.h: * stack.c: * stabsread.h: * sparcobsd-tdep.c: * sparcnbsd-tdep.c: * sparcnbsd-nat.c: * sparc64obsd-tdep.c: * sparc64nbsd-tdep.c: * sparc64nbsd-nat.c: * sparc64fbsd-tdep.c: * sparc64fbsd-nat.c: * sparc64-tdep.h: * sparc64-tdep.c: * sparc64-sol2-tdep.c: * sparc64-nat.c: * ui-file.c: * typeprint.h: * typeprint.c: * tramp-frame.h: * tramp-frame.c: * trad-frame.h: * trad-frame.c: * tracepoint.h: * top.c: * tobs.inc: * thread.c: * terminal.h: * target.h: * symfile.h: * stop-gdb.c: * vaxbsd-nat.c: * vax-tdep.h: * vax-tdep.c: * vax-nat.c: * varobj.h: * varobj.c: * value.h: * value.c: * valprint.h: * valprint.c: * v850-tdep.c: * uw-thread.c: * user-regs.c: * ui-out.h: * ui-out.c: * ui-file.h: * xcoffsolib.h: * xcoffsolib.c: * wrapper.c: * wince.c: * wince-stub.h: * wince-stub.c: * vaxobsd-tdep.c: * vaxnbsd-tdep.c: * gdb_gcore.sh: * copying.c: * configure.ac: * aclocal.m4: * acinclude.m4: * reply_mig_hack.awk: * observer.sh: * gdb_mbuild.sh: * arm-linux-tdep.c: * blockframe.c: * dbug-rom.c: * environ.h: * dwarf2loc.h: * gdb-events.sh: * glibc-tdep.h: * gdb_wait.h: * gdbthread.h: * i386-sol2-tdep.c: * hppabsd-tdep.c: * hppa-linux-nat.c: * hppa-hpux-nat.c: * ia64-linux-tdep.c: * infptrace.c: * linespec.h: * maint.c: * mips-mdebug-tdep.h: * remote-m32r-sdi.c: * s390-nat.c: * rs6000-nat.c: * remote-utils.h: * sh3-rom.c: * sh-linux-tdep.c: * top.h: * symtab.h: * symmisc.c: * symfile-mem.c: * srec.h: * user-regs.h: * version.h: * valarith.c: * xstormy16-tdep.c: * wrapper.h: * Makefile.in: * f-exp.y: * cris-tdep.c: * cp-name-parser.y: * procfs.c: * proc-utils.h: * proc-flags.c: * proc-api.c: * p-exp.y: * m68hc11-tdep.c: * m2-exp.y: * kod.h: * kod-cisco.c: * jv-exp.y: * hppa-linux-tdep.c: Add (c) after Copyright. Update the FSF address.
2005-02-212005-02-20 Andrew Cagney <cagney@gnu.org>Andrew Cagney1-6/+7
Use add_setshow_enum_cmd through out. * arch-utils.c, charset.c, demangle.c, i386-tdep.c: Update. * infrun.c, mips-tdep.c, osabi.c, serial.c, tui/tui-win.c: Update.
2005-02-182005-02-18 Andrew Cagney <cagney@gnu.org>Andrew Cagney1-8/+8
Use add_setshow_zinteger_cmd through out. Re-sync gdbarch.sh and gdbarch.c. * breakpoint.c, frame.c, gdb-events.sh, gdbarch.sh: Update. * gdbtypes.c, infrun.c, linux-nat.c, maint.c, monitor.c: Update. * pa64solib.c, parse.c, remote-mips.c, ser-go32.c: Update. * serial.c, solib-frv.c, somsolib.c, target.c, top.c: Update. * varobj.c, cli/cli-cmds.c: Update. * gdbarch.c, gdb-events.c: Regenerate.
2005-02-172005-02-17 Andrew Cagney <cagney@gnu.org>Andrew Cagney1-7/+7
* cli/cli-decode.c (add_setshow_filename_cmd): Set the completer to filename_completer. * solib.c (_initialize_solib, reload_shared_libraries): Use add_setshow_filename_cmd. * serial.c (_initialize_serial): Ditto. * remote-utils.c (_initialize_sr_support): Ditto.
2005-02-152005-02-15 Andrew Cagney <cagney@gnu.org>Andrew Cagney1-7/+7
Mark up add_com, add_info and add_prefix_cmd. * breakpoint.c, cp-support.c, dcache.c, dwarf2read.c: Update. * exec.c, f-valprint.c, frame.c, gcore.c, gnu-nat.c: Update. * go32-nat.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update. * kod.c, language.c, linux-nat.c, m32r-rom.c, macrocmd.c: Update. * maint.c, memattr.c, mips-tdep.c, nto-procfs.c, objc-lang.c: Update. * ocd.c, pa64solib.c, printcmd.c, procfs.c, regcache.c: Update. * remote-e7000.c, remote-m32r-sdi.c, remote-mips.c: Update. * remote-sds.c, remote-sim.c, remote-st.c, remote-utils.c: Update. * remote.c, rs6000-tdep.c, ser-go32.c, serial.c: Update. * sh-tdep.c, solib.c, somsolib.c, source.c, stack.c: Update. * symfile.c, symtab.c, target.c, thread.c, top.c: Update. * tracepoint.c, typeprint.c, utils.c, valprint.c: Update. * win32-nat.c, xcoffsolib.c, cli/cli-cmds.c, cli/cli-dump.c: Update. * cli/cli-logging.c, tui/tui-layout.c, tui/tui-regs.c: Update. * tui/tui-stack.c, tui/tui-win.c: Update.
2005-02-112005-02-11 Andrew Cagney <cagney@gnu.org>Andrew Cagney1-4/+4
Mark up error_no_arg, query, perror_with_name, complaint, and internal_error. * breakpoint.c, cp-abi.c, cp-namespace.c, cp-support.c: Update. * cris-tdep.c, dbxread.c, dictionary.c, dsrec.c: Update. * dummy-frame.c, dve3900-rom.c, dwarf2-frame.c, dwarf2expr.c: Update. * dwarf2read.c, dwarfread.c, elfread.c, event-loop.c: Update. * exceptions.c, exec.c, f-lang.c, findvar.c, fork-child.c: Update. * frame-unwind.c, frame.c, frv-linux-tdep.c, frv-tdep.c: Update. * gdb_assert.h, gdbarch.c, gdbtypes.c, gnu-nat.c: Update. * go32-nat.c, hppa-tdep.c, hppabsd-nat.c, hpread.c: Update. * i386-linux-nat.c, i386-nat.c, i386-tdep.c, i386bsd-nat.c: Update. * i386fbsd-nat.c, inf-ptrace.c, inf-ttrace.c, infcall.c: Update. * infcmd.c, inflow.c, infptrace.c, infrun.c, inftarg.c: Update. * interps.c, language.c, linespec.c, linux-nat.c: Update. * m32r-linux-nat.c, m68k-tdep.c, m68kbsd-nat.c: Update. * m68klinux-nat.c, m88kbsd-nat.c, macroexp.c, macroscope.c: Update. * macrotab.c, maint.c, mdebugread.c, memattr.c: Update. * mips-linux-tdep.c, mips-tdep.c, mips64obsd-nat.c: Update. * mipsnbsd-nat.c, mn10300-tdep.c, monitor.c, nto-procfs.c: Update. * objc-lang.c, objfiles.c, objfiles.h, ocd.c, osabi.c: Update. * parse.c, ppc-bdm.c, ppc-linux-nat.c, ppc-sysv-tdep.c: Update. * ppcnbsd-nat.c, ppcobsd-nat.c, printcmd.c, procfs.c: Update. * regcache.c, reggroups.c, remote-e7000.c, remote-mips.c: Update. * remote-rdp.c, remote-sds.c, remote-sim.c, remote-st.c: Update. * remote-utils.c, remote.c, rs6000-nat.c, rs6000-tdep.c: Update. * s390-nat.c, s390-tdep.c, sentinel-frame.c, serial.c: Update. * sh-tdep.c, sh3-rom.c, sh64-tdep.c, shnbsd-nat.c: Update. * solib-aix5.c, solib-svr4.c, solib.c, source.c: Update. * sparc-nat.c, stabsread.c, stack.c, symfile.c, symtab.c: Update. * symtab.h, target.c, tracepoint.c, ui-file.c, ui-out.c: Update. * utils.c, valops.c, valprint.c, vax-nat.c, vaxbsd-nat.c: Update. * win32-nat.c, xcoffread.c, xstormy16-tdep.c: Update. * cli/cli-cmds.c, cli/cli-logging.c, cli/cli-script.c: Update. * cli/cli-setshow.c, mi/mi-cmd-break.c, mi/mi-cmds.c: Update. * mi/mi-console.c, mi/mi-getopt.c, mi/mi-out.c: Update. * tui/tui-file.c, tui/tui-interp.c: Update.
2004-07-262004-07-26 Andrew Cagney <cagney@gnu.org>Andrew Cagney1-8/+9
* cli/cli-decode.c (deprecated_add_show_from_set): Deprecate. * xcoffsolib.c (_initialize_xcoffsolib): Update. * wince.c (_initialize_wince): Update. * win32-nat.c (_initialize_win32_nat): Update. * varobj.c (_initialize_varobj): Update. * valops.c (_initialize_valops): Update. * utils.c (initialize_utils, initialize_utils): Update. * tui/tui-win.c (_initialize_tui_win): Update. * top.c (init_main): Update. * symfile.c (_initialize_symfile): Update. * source.c (_initialize_source): Update. * somsolib.c (_initialize_som_solib): Update. * solib.c (_initialize_solib): Update. * solib-frv.c (_initialize_frv_solib): Update. * serial.c (_initialize_serial): Update. * ser-go32.c (_initialize_ser_dos, _initialize_ser_dos): Update. * remote.c (_initialize_remote, _initialize_remote): Update. * remote-vx.c (_initialize_vx): Update. * remote-utils.c (_initialize_sr_support): Update. * remote-sds.c (_initialize_remote_sds): Update. * remote-mips.c (_initialize_remote_mips): Update. * remote-e7000.c (_initialize_remote_e7000): Update. * proc-api.c (_initialize_proc_api): Update. * printcmd.c: Update. * parse.c (_initialize_parse): Update. * pa64solib.c (_initialize_pa64_solib): Update. * p-valprint.c (_initialize_pascal_valprint): Update. * monitor.c (_initialize_remote_monitors): Update. * mips-tdep.c (_initialize_mips_tdep): Update. * mcore-tdep.c (_initialize_mcore_tdep): Update. * maint.c (_initialize_maint_cmds): Update. * lin-lwp.c (_initialize_lin_lwp): Update. * language.c (_initialize_language): Update. * kod.c (_initialize_kod): Update. * infrun.c (set_schedlock_func, _initialize_infrun): Update. * i386-tdep.c (_initialize_i386_tdep): Update. * gdbtypes.c (build_gdbtypes, _initialize_gdbtypes): Update. * gdbarch.sh: Update. * gdbarch.c: Re-generate. * gdb-events.sh: Update. * gdb-events.c: Re-generate. * frame.c (_initialize_frame): Update. * exec.c: Update. * demangle.c (_initialize_demangler): Update. * dcache.c (_initialize_dcache): Update. * cris-tdep.c (_initialize_cris_tdep, cris_version_update): Update. * cp-valprint.c (_initialize_cp_valprint): Update. * corefile.c (_initialize_core): Update. * command.h: Update. * cli/cli-decode.h: Update. * cli/cli-cmds.c (init_cli_cmds): Update. * charset.c (_initialize_charset): Update. * breakpoint.c (_initialize_breakpoint): Update. * arm-tdep.c (_initialize_arm_tdep_initialize_arm_tdep): Update. * alpha-tdep.c (_initialize_alpha_tdep): Update. * aix-thread.c (_initialize_aix_thread): Update.
2004-06-292004-06-28 Andrew Cagney <cagney@gnu.org>Andrew Cagney1-1/+1
* defs.h (xstrvprintf): Declare. * utils.c (xstrvprintf): New function. (internal_vproblem, xstrprintf, xasprintf) (vfprintf_maybe_filtered, vfprintf_unfiltered): Use xstrvprintf. * serial.c (serial_printf): Ditto. * complaints.c (vcomplaint): Ditto.
2002-03-19* defs.h (XMALLOC): Define.Andrew Cagney1-5/+2
* gdb-events.sh (XMALLOC): Delete macro. * gdb-events.c, gdb-events.h: Regenerate. * gdbarch.sh (XMALLOC): Delete macro. * gdbarch.c: Regenerate. * serial.c (XMALLOC): Delete macro. * ui-file.c (XMALLOC): Ditto. * ser-unix.h (XMALLOC): Ditto. * sh-tdep.c (XMALLOC): Ditto. * ui-out.c (XMALLOC): Ditto. * utils.c (XMALLOC): Ditto. * i386-tdep.c (XMALLOC): Ditto. * gdb-events.c (XMALLOC): Ditto. * d10v-tdep.c (XMALLOC): Ditto. * cli-out.c (XMALLOC): Ditto. * cli-out.c, d10v-tdep.c, gdb-events.c: Update copyright. * gdb-events.sh, i386-tdep.c, ser-unix.h, serial.c: Ditto. * ui-file.c, ui-out.c: Ditto.
2002-02-24* ocd.c (ocd_open): Do not try to open the "ocd" device.Andrew Cagney1-3/+1
* serial.c (serial_open): Delete check for "ocd". Fix PR gdb/349.
2001-09-26Add framework for ``set/show serial ...''.Andrew Cagney1-0/+31
2001-07-15* serial.h (SERIAL_ASYNC): Delete.Andrew Cagney1-14/+14
(DEPRECATED_SERIAL_FD): Delete. (SERIAL_DEBUG): Delete. (SERIAL_DEBUG_P): Delete. (SERIAL_DRAIN_OUTPUT): Delete. (SERIAL_FLUSH_OUTPUT): Delete. (SERIAL_FLUSH_INPUT): Delete. (SERIAL_SEND_BREAK): Delete. (SERIAL_RAW): Delete. (SERIAL_GET_TTY_STATE): Delete. (SERIAL_SET_TTY_STATE): Delete. (SERIAL_PRINT_TTY_STATE): Delete. (SERIAL_NOFLUSH_SET_TTY_STATE): Delete. (SERIAL_SETBAUDRATE): Delete. (SERIAL_SETSTOPBITS): Delete. (SERIAL_CAN_ASYNC_P): Delete. (SERIAL_IS_ASYNC_P): Delete. (SERIAL_UN_FDOPEN): Delete. (SERIAL_READCHAR): Delete. (SERIAL_CLOSE): Delete. (SERIAL_FDOPEN): Delete. (SERIAL_OPEN): Delete.
2001-07-11s/typedef serial_t/struct serial */Andrew Cagney1-39/+36
2001-07-09s/struct _serial_t/struct serial/Andrew Cagney1-2/+5
2001-03-06Update/correct copyright notices.Kevin Buettner1-2/+2
2001-02-08Add __FILE__ and __LINE__ parameter to internal_error() /Andrew Cagney1-2/+4
internal_verror().
2001-01-31Replace strsave() with xstrdup().Andrew Cagney1-2/+4
generated by cgit v1.1 at 2024-11-20 06:40:00 +0000