| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch adds a new "event" struct serial type, that is an
abstraction specifically for waking up blocking waits/selects,
implemented on top of a pipe on POSIX, and on top of a native Windows
event (CreateEvent, etc.) on Windows.
This will be used to plug signal handler / mainline code races.
For example, GDB can indefinitely delay handling a quit request if the
user presses Ctrl-C between the last QUIT call and the next (blocking)
gdb_select call in the event loop:
QUIT;
<<< press ctrl-c here and end up blocked in gdb_select
indefinitely.
gdb_select (...); // whoops, SIGINT was already handled, no EINTR.
A global alone (either the quit flag, or the "ready" flag of the async
signal handlers in the event loop) is not sufficient.
To plug races such as these on POSIX systems, we have to register some
waitable file descriptor in the set of files gdb_select waits on, and
write to it from the signal handler. This is classically a pipe, and
the pattern called the self-pipe trick. On Linux, it could be a more
efficient eventfd instead, but I'm sticking with a pipe for
simplifity, as we need it for portability anyway.
(Alternatively, we could use pselect/ppoll, and block signals until
the pselect. The latter is not a design I think GDB could use,
because we want the QUIT macro to be super cheap, as it is used in
loops. Plus, Windows.)
This is a "struct serial" because Windows's gdb_select relies on that.
Windows's gdb_select, our "select" replacement, knows how to wait on
all kinds of handles (regular files, pipes, sockets, console, etc.)
unlike the native Windows "select" function, which can only wait on
sockets. Each file descriptor for a "serial" type that is not
normally waitable with WaitForMultipleObjects must have a
corresponding struct serial instance. gdb_select then internally
looks up the struct serial instance that wraps each file descriptor,
and asks it for the corresponding Windows waitable handle.
We could use serial_pipe() to create a "struct serial"-wrapped pipe
that is usable everywhere, including Windows. That's what currently
python/python.c uses for cross-thread posting of events.
However, serial_write and serial_readchar are not designed to be
async-signal-safe on POSIX hosts. It's easier to bypass those when
setting/clearing the event source.
And writing and a serial pipe is a bit heavy weight on Windows.
gdb_select requires an extra thread to wait on the pipe and several
Windows events, when a single manual-reset Windows event, with no
extra thread is sufficient.
The intended usage is simply:
- Call make_serial_event to create a serial event object.
- From the signal handler call serial_event_set to set the event.
- From mainline code, have select/poll wait for serial_event_fd(), in
addition to whatever other files you're about to wait for.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add ser-event.c.
(HFILES_NO_SRCDIR): Add ser-event.h.
(COMMON_OBS): Add ser-event.o.
* ser-event.c, ser-event.h: New files.
* serial.c (new_serial): New function, factored out from
(serial_fdopen_ops): ... this.
(serial_open_ops_1): New function, factored out from
(serial_open): ... this.
(serial_open_ops): New function.
* serial.h (struct serial): Forware declare.
(serial_open_ops): New declaration.
|
|
Not used by anything.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* serial.c (serial_open, serial_fdopen_ops, do_serial_close):
Remove references to name.
* serial.h (struct serial) <name>: Delete.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
See previous patch's description.
gdb/ChangeLog:
* macrocmd.c (print_macro_callback): Add cast(s).
* macrotab.c (macro_bcache_str): Likewise.
(new_macro_definition): Likewise.
* main.c (captured_main): Likewise.
* maint.c (print_bfd_section_info): Likewise.
* mdebugread.c (mdebug_build_psymtabs): Likewise.
(basic_type): Likewise.
* memattr.c (mem_region_cmp): Likewise.
* memory-map.c (memory_map_start_memory): Likewise.
(memory_map_end_memory): Likewise.
(memory_map_start_property): Likewise.
(memory_map_end_property): Likewise.
(clear_result): Likewise.
* memrange.c (compare_mem_ranges): Likewise.
* mep-tdep.c (mep_analyze_frame_prologue): Likewise.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Likewise.
* mi/mi-console.c (mi_console_file_delete): Likewise.
(mi_console_file_fputs): Likewise.
(mi_console_raw_packet): Likewise.
(mi_console_file_flush): Likewise.
(mi_console_set_raw): Likewise.
* mi/mi-interp.c (mi_interpreter_resume): Likewise.
(mi_new_thread): Likewise.
(mi_thread_exit): Likewise.
(mi_record_changed): Likewise.
(mi_inferior_added): Likewise.
(mi_inferior_appeared): Likewise.
(mi_inferior_exit): Likewise.
(mi_inferior_removed): Likewise.
(mi_interp_data): Likewise.
(mi_on_normal_stop): Likewise.
(mi_traceframe_changed): Likewise.
(mi_tsv_created): Likewise.
(mi_tsv_deleted): Likewise.
(mi_tsv_modified): Likewise.
(mi_breakpoint_created): Likewise.
(mi_breakpoint_deleted): Likewise.
(mi_breakpoint_modified): Likewise.
(mi_output_running_pid): Likewise.
(mi_inferior_count): Likewise.
(mi_solib_loaded): Likewise.
(mi_solib_unloaded): Likewise.
(mi_command_param_changed): Likewise.
(mi_memory_changed): Likewise.
(report_initial_inferior): Likewise.
(mi_ui_out): Likewise.
(mi_set_logging): Likewise.
* mi/mi-main.c (collect_cores): Likewise.
(print_one_inferior): Likewise.
(free_vector_of_ints): Likewise.
(free_splay_tree): Likewise.
(mi_execute_command): Likewise.
* mi/mi-out.c (mi_table_body): Likewise.
(mi_table_end): Likewise.
(mi_table_header): Likewise.
(mi_begin): Likewise.
(mi_end): Likewise.
(mi_field_int): Likewise.
(mi_field_string): Likewise.
(mi_field_fmt): Likewise.
(mi_flush): Likewise.
(mi_redirect): Likewise.
(field_separator): Likewise.
(mi_open): Likewise.
(mi_close): Likewise.
(mi_out_buffered): Likewise.
(mi_out_rewind): Likewise.
(mi_out_put): Likewise.
(mi_version): Likewise.
(mi_out_data_dtor): Likewise.
* mi/mi-parse.c (mi_parse_cleanup): Likewise.
* microblaze-tdep.c (microblaze_frame_cache): Likewise.
* minidebug.c (lzma_open): Likewise.
(lzma_pread): Likewise.
(lzma_close): Likewise.
(lzma_stat): Likewise.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* mips-sde-tdep.c (mips_sde_frame_cache): Likewise.
(mips_sde_elf_osabi_sniff_abi_tag_sections): Likewise.
* mips-tdep.c (mips_insn16_frame_cache): Likewise.
(mips_micro_frame_cache): Likewise.
(mips_insn32_frame_cache): Likewise.
(mips_stub_frame_cache): Likewise.
(gdb_print_insn_mips): Likewise.
(value_of_mips_user_reg): Likewise.
(mips_gdbarch_init): Likewise.
* mips64obsd-tdep.c (mips64obsd_supply_gregset): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_supply_fpregset): Likewise.
(mipsnbsd_supply_gregset): Likewise.
* mn10300-linux-tdep.c (am33_supply_fpregset_method): Likewise.
(am33_collect_gregset_method): Likewise.
(am33_collect_fpregset_method): Likewise.
* mn10300-tdep.c (mn10300_analyze_frame_prologue): Likewise.
* moxie-tdep.c (moxie_frame_cache): Likewise.
* msp430-tdep.c (msp430_get_opcode_byte): Likewise.
(msp430_analyze_frame_prologue): Likewise.
* mt-tdep.c (mt_frame_unwind_cache): Likewise.
* nios2-linux-tdep.c (nios2_supply_gregset): Likewise.
(nios2_collect_gregset): Likewise.
* nios2-tdep.c (nios2_frame_unwind_cache): Likewise.
(nios2_stub_frame_cache): Likewise.
* objc-lang.c (find_methods): Likewise.
* objfiles.c (objfiles_pspace_data_cleanup): Likewise.
(get_objfile_pspace_data): Likewise.
(get_objfile_bfd_data): Likewise.
(objfile_bfd_data_free): Likewise.
(add_to_objfile_sections): Likewise.
(do_free_objfile_cleanup): Likewise.
(resume_section_map_updates_cleanup): Likewise.
* opencl-lang.c (builtin_opencl_type): Likewise.
* osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise.
* osdata.c (osdata_start_osdata): Likewise.
(osdata_start_item): Likewise.
(osdata_start_column): Likewise.
(osdata_end_column): Likewise.
(clear_parsing_data): Likewise.
(osdata_free_cleanup): Likewise.
* parse.c (type_stack_cleanup): Likewise.
(exp_uses_objfile_iter): Likewise.
* ppc-linux-tdep.c (ppc_linux_supply_gregset): Likewise.
(ppc_linux_collect_gregset): Likewise.
(ppu2spu_prev_arch): Likewise.
(ppu2spu_this_id): Likewise.
(ppu2spu_prev_register): Likewise.
(ppu2spu_unwind_register): Likewise.
(ppu2spu_sniffer): Likewise.
(ppu2spu_dealloc_cache): Likewise.
(ppc_linux_init_abi): Likewise.
* ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise.
* progspace.c (restore_program_space): Likewise.
* psymtab.c (find_pc_sect_psymtab): Likewise.
(compare_psymbols): Likewise.
(psymbol_bcache_full): Likewise.
(allocate_psymtab): Likewise.
(discard_psymtabs_upto): Likewise.
* python/py-block.c (set_block): Likewise.
(del_objfile_blocks): Likewise.
* python/py-breakpoint.c (build_bp_list): Likewise.
* python/py-inferior.c (inferior_to_inferior_object): Likewise.
(build_inferior_list): Likewise.
(py_free_inferior): Likewise.
* python/py-objfile.c (py_free_objfile): Likewise.
(objfile_to_objfile_object): Likewise.
* python/py-prettyprint.c (py_restore_tstate): Likewise.
* python/py-progspace.c (py_free_pspace): Likewise.
(pspace_to_pspace_object): Likewise.
* python/py-symbol.c (set_symbol): Likewise.
(del_objfile_symbols): Likewise.
* python/py-symtab.c (set_sal): Likewise.
(set_symtab): Likewise.
(del_objfile_symtab): Likewise.
(del_objfile_sal): Likewise.
* python/py-type.c (save_objfile_types): Likewise.
(set_type): Likewise.
* python/py-unwind.c (pyuw_prev_register): Likewise.
(pyuw_on_new_gdbarch): Likewise.
* python/py-utils.c (py_decref): Likewise.
(py_xdecref): Likewise.
(gdb_py_generic_dict): Likewise.
* python/py-xmethods.c (gdbpy_free_xmethod_worker_data): Likewise.
(gdbpy_clone_xmethod_worker_data): Likewise.
(gdbpy_get_xmethod_arg_types): Likewise.
(gdbpy_get_xmethod_result_type): Likewise.
(gdbpy_invoke_xmethod): Likewise.
* python/python.c (gdbpy_apply_type_printers): Likewise.
(gdbpy_free_type_printers): Likewise.
* record-btrace.c (record_btrace_disable_callback): Likewise.
(bfcache_hash): Likewise.
(bfcache_eq): Likewise.
(btrace_get_frame_function): Likewise.
(record_btrace_frame_unwind_stop_reason): Likewise.
(record_btrace_frame_this_id): Likewise.
(record_btrace_frame_prev_register): Likewise.
(record_btrace_frame_dealloc_cache): Likewise.
* record-full.c (record_full_message_wrapper): Likewise.
(record_full_save_cleanups): Likewise.
* regcache.c (regcache_descr): Likewise.
(do_regcache_xfree): Likewise.
(do_regcache_invalidate): Likewise.
(do_cooked_read): Likewise.
(regcache_transfer_regset): Likewise.
* reggroups.c (reggroup_add): Likewise.
(reggroup_next): Likewise.
(reggroup_prev): Likewise.
* remote-fileio.c (do_remote_fileio_request): Likewise.
* remote-notif.c (remote_async_get_pending_events_handler): Likewise.
(do_notif_event_xfree): Likewise.
* remote.c (get_remote_arch_state): Likewise.
(remote_pspace_data_cleanup): Likewise.
(get_remote_exec_file): Likewise.
(set_pspace_remote_exec_file): Likewise.
(compare_pnums): Likewise.
(clear_threads_listing_context): Likewise.
(remote_newthread_step): Likewise.
(start_thread): Likewise.
(end_thread): Likewise.
(remove_child_of_pending_fork): Likewise.
(remove_stop_reply_for_inferior): Likewise.
(remove_stop_reply_of_remote_state): Likewise.
(remote_notif_remove_once_on_match): Likewise.
(stop_reply_match_ptid_and_ws): Likewise.
(kill_child_of_pending_fork): Likewise.
(register_remote_g_packet_guess): Likewise.
(remote_read_description_p): Likewise.
(remote_read_description): Likewise.
(free_actions_list_cleanup_wrapper): Likewise.
(remote_async_serial_handler): Likewise.
* rl78-tdep.c (rl78_get_opcode_byte): Likewise.
(rl78_analyze_frame_prologue): Likewise.
* rs6000-tdep.c (ppc_supply_gregset): Likewise.
(ppc_supply_fpregset): Likewise.
(ppc_supply_vsxregset): Likewise.
(ppc_supply_vrregset): Likewise.
(ppc_collect_gregset): Likewise.
(ppc_collect_fpregset): Likewise.
(ppc_collect_vsxregset): Likewise.
(ppc_collect_vrregset): Likewise.
(e500_move_ev_register): Likewise.
(do_regcache_raw_write): Likewise.
(rs6000_frame_cache): Likewise.
(rs6000_epilogue_frame_cache): Likewise.
(rs6000_gdbarch_init): Likewise.
* rx-tdep.c (rx_get_opcode_byte): Likewise.
(rx_analyze_frame_prologue): Likewise.
(rx_frame_type): Likewise.
(rx_frame_sniffer_common): Likewise.
* s390-linux-tdep.c (s390_check_for_saved): Likewise.
(s390_frame_unwind_cache): Likewise.
(s390_stub_frame_unwind_cache): Likewise.
(s390_sigtramp_frame_unwind_cache): Likewise.
* score-tdep.c (score_make_prologue_cache): Likewise.
* sentinel-frame.c (sentinel_frame_prev_register): Likewise.
(sentinel_frame_prev_arch): Likewise.
* ser-base.c (fd_event): Likewise.
(push_event): Likewise.
(ser_base_write): Likewise.
* ser-pipe.c (pipe_close): Likewise.
* serial.c (serial_write): Likewise.
* sh-tdep.c (sh_frame_cache): Likewise.
(sh_stub_this_id): Likewise.
* sh64-tdep.c (sh64_frame_cache): Likewise.
* solib-aix.c (get_solib_aix_inferior_data): Likewise.
(library_list_start_library): Likewise.
(library_list_start_list): Likewise.
(solib_aix_free_library_list): Likewise.
* solib-darwin.c (get_darwin_info): Likewise.
* solib-dsbt.c (get_dsbt_info): Likewise.
* solib-spu.c (append_ocl_sos): Likewise.
* solib-svr4.c (svr4_pspace_data_cleanup): Likewise.
(get_svr4_info): Likewise.
(library_list_start_library): Likewise.
(svr4_library_list_start_list): Likewise.
(hash_probe_and_action): Likewise.
(equal_probe_and_action): Likewise.
(svr4_update_solib_event_breakpoint): Likewise.
(set_solib_svr4_fetch_link_map_offsets): Likewise.
(svr4_fetch_link_map_offsets): Likewise.
(svr4_have_link_map_offsets): Likewise.
* solib-target.c (library_list_start_segment): Likewise.
(library_list_start_section): Likewise.
(library_list_start_library): Likewise.
(library_list_end_library): Likewise.
(library_list_start_list): Likewise.
(solib_target_free_library_list): Likewise.
* solib.c (solib_ops): Likewise.
(set_solib_ops): Likewise.
* sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise.
* sparc-tdep.c (sparc_frame_cache): Likewise.
(sparc32_frame_cache): Likewise.
(sparc32_supply_gregset): Likewise.
(sparc32_collect_gregset): Likewise.
(sparc32_supply_fpregset): Likewise.
(sparc32_collect_fpregset): Likewise.
* sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise.
* sparc64-tdep.c (sparc64_supply_gregset): Likewise.
(sparc64_collect_gregset): Likewise.
(sparc64_supply_fpregset): Likewise.
(sparc64_collect_fpregset): Likewise.
* sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_cache): Likewise.
* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_cache): Likewise.
* sparc64obsd-tdep.c (sparc64obsd_frame_cache): Likewise.
(sparc64obsd_trapframe_cache): Likewise.
* sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_cache): Likewise.
* sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_cache): Likewise.
* spu-multiarch.c (spu_gdbarch): Likewise.
* spu-tdep.c (spu_frame_unwind_cache): Likewise.
(spu2ppu_prev_arch): Likewise.
(spu2ppu_this_id): Likewise.
(spu2ppu_prev_register): Likewise.
(spu2ppu_dealloc_cache): Likewise.
(spu_dis_asm_print_address): Likewise.
(gdb_print_insn_spu): Likewise.
(spu_get_overlay_table): Likewise.
* stabsread.c (rs6000_builtin_type): Likewise.
* stack.c (do_print_variable_and_value): Likewise.
* stap-probe.c (get_stap_base_address_1): Likewise.
* symfile-debug.c (debug_qf_has_symbols): Likewise.
(debug_qf_find_last_source_symtab): Likewise.
(debug_qf_forget_cached_source_info): Likewise.
(debug_qf_map_symtabs_matching_filename): Likewise.
(debug_qf_lookup_symbol): Likewise.
(debug_qf_print_stats): Likewise.
(debug_qf_dump): Likewise.
(debug_qf_relocate): Likewise.
(debug_qf_expand_symtabs_for_function): Likewise.
(debug_qf_expand_all_symtabs): Likewise.
(debug_qf_expand_symtabs_with_fullname): Likewise.
(debug_qf_map_matching_symbols): Likewise.
(debug_qf_expand_symtabs_matching): Likewise.
(debug_qf_find_pc_sect_compunit_symtab): Likewise.
(debug_qf_map_symbol_filenames): Likewise.
(debug_sym_get_probes): Likewise.
(debug_sym_new_init): Likewise.
(debug_sym_init): Likewise.
(debug_sym_read): Likewise.
(debug_sym_read_psymbols): Likewise.
(debug_sym_finish): Likewise.
(debug_sym_offsets): Likewise.
(debug_sym_read_linetable): Likewise.
(debug_sym_relocate): Likewise.
(uninstall_symfile_debug_logging): Likewise.
* symfile-mem.c (symbol_file_add_from_memory_wrapper): Likewise.
* symfile.c (place_section): Likewise.
(add_section_size_callback): Likewise.
(load_progress): Likewise.
(load_section_callback): Likewise.
(clear_memory_write_data): Likewise.
(allocate_symtab): Likewise.
* symmisc.c (maintenance_expand_file_matcher): Likewise.
* symtab.c (lookup_symtab_callback): Likewise.
(hash_demangled_name_entry): Likewise.
(eq_demangled_name_entry): Likewise.
(get_symbol_cache): Likewise.
(symbol_cache_cleanup): Likewise.
(set_symbol_cache_size): Likewise.
(symbol_cache_flush): Likewise.
(maintenance_print_symbol_cache): Likewise.
(maintenance_print_symbol_cache_statistics): Likewise.
(delete_filename_seen_cache): Likewise.
(output_partial_symbol_filename): Likewise.
(search_symbols_file_matches): Likewise.
(search_symbols_name_matches): Likewise.
(do_free_completion_list): Likewise.
(maybe_add_partial_symtab_filename): Likewise.
(get_main_info): Likewise.
(main_info_cleanup): Likewise.
* target-dcache.c (target_dcache_cleanup): Likewise.
(target_dcache_init_p): Likewise.
(target_dcache_invalidate): Likewise.
(target_dcache_get): Likewise.
(target_dcache_get_or_init): Likewise.
* target-descriptions.c (target_find_description): Likewise.
(tdesc_find_type): Likewise.
(tdesc_data_cleanup): Likewise.
(tdesc_find_arch_register): Likewise.
(tdesc_register_name): Likewise.
(tdesc_register_type): Likewise.
(tdesc_register_reggroup_p): Likewise.
(set_tdesc_pseudo_register_name): Likewise.
(set_tdesc_pseudo_register_type): Likewise.
(set_tdesc_pseudo_register_reggroup_p): Likewise.
(tdesc_use_registers): Likewise.
(free_target_description): Likewise.
* target-memory.c (compare_block_starting_address): Likewise.
(cleanup_request_data): Likewise.
(cleanup_write_requests_vector): Likewise.
* target.c (open_target): Likewise.
(cleanup_restore_target_terminal): Likewise.
(free_memory_read_result_vector): Likewise.
* thread.c (disable_thread_stack_temporaries): Likewise.
(finish_thread_state_cleanup): Likewise.
(do_restore_current_thread_cleanup): Likewise.
(restore_current_thread_cleanup_dtor): Likewise.
(set_thread_refcount): Likewise.
(tp_array_compar): Likewise.
(do_captured_thread_select): Likewise.
* tic6x-tdep.c (tic6x_frame_unwind_cache): Likewise.
(tic6x_stub_this_id): Likewise.
* tilegx-tdep.c (tilegx_frame_cache): Likewise.
* top.c (do_restore_instream_cleanup): Likewise.
(gdb_readline_wrapper_cleanup): Likewise.
(kill_or_detach): Likewise.
(print_inferior_quit_action): Likewise.
* tracefile-tfile.c (match_blocktype): Likewise.
(build_traceframe_info): Likewise.
* tracefile.c (trace_file_writer_xfree): Likewise.
* tracepoint.c (memrange_cmp): Likewise.
(do_collect_symbol): Likewise.
(do_clear_collection_list): Likewise.
(do_restore_current_traceframe_cleanup): Likewise.
(restore_current_traceframe_cleanup_dtor): Likewise.
(free_current_marker): Likewise.
(traceframe_info_start_memory): Likewise.
(traceframe_info_start_tvar): Likewise.
(free_result): Likewise.
* tramp-frame.c (tramp_frame_cache): Likewise.
* tui/tui-file.c (tui_file_delete): Likewise.
(tui_fileopen): Likewise.
(tui_sfileopen): Likewise.
(tui_file_isatty): Likewise.
(tui_file_rewind): Likewise.
(tui_file_put): Likewise.
(tui_file_fputs): Likewise.
(tui_file_get_strbuf): Likewise.
(tui_file_adjust_strbuf): Likewise.
(tui_file_flush): Likewise.
* tui/tui-layout.c (make_command_window): Likewise.
(make_data_window): Likewise.
(show_source_disasm_command): Likewise.
(show_data): Likewise.
(make_source_or_disasm_window): Likewise.
(show_source_or_disasm_and_command): Likewise.
* tui/tui-out.c (tui_field_int): Likewise.
(tui_field_string): Likewise.
(tui_field_fmt): Likewise.
(tui_text): Likewise.
* typeprint.c (hash_typedef_field): Likewise.
(eq_typedef_field): Likewise.
(do_free_typedef_hash): Likewise.
(copy_typedef_hash_element): Likewise.
(do_free_global_table): Likewise.
(find_global_typedef): Likewise.
(find_typedef_in_hash): Likewise.
* ui-file.c (ui_file_write_for_put): Likewise.
(do_ui_file_xstrdup): Likewise.
(mem_file_delete): Likewise.
(mem_file_rewind): Likewise.
(mem_file_put): Likewise.
(mem_file_write): Likewise.
(stdio_file_delete): Likewise.
(stdio_file_flush): Likewise.
(stdio_file_read): Likewise.
(stdio_file_write): Likewise.
(stdio_file_write_async_safe): Likewise.
(stdio_file_fputs): Likewise.
(stdio_file_isatty): Likewise.
(stdio_file_fseek): Likewise.
(tee_file_delete): Likewise.
(tee_file_flush): Likewise.
(tee_file_write): Likewise.
(tee_file_fputs): Likewise.
(tee_file_isatty): Likewise.
* ui-out.c (do_cleanup_table_end): Likewise.
(do_cleanup_end): Likewise.
* user-regs.c (user_reg_add): Likewise.
(user_reg_map_name_to_regnum): Likewise.
(usernum_to_user_reg): Likewise.
(maintenance_print_user_registers): Likewise.
* utils.c (do_bfd_close_cleanup): Likewise.
(do_fclose_cleanup): Likewise.
(do_obstack_free): Likewise.
(do_ui_file_delete): Likewise.
(do_ui_out_redirect_pop): Likewise.
(do_free_section_addr_info): Likewise.
(restore_integer): Likewise.
(do_unpush_target): Likewise.
(do_htab_delete_cleanup): Likewise.
(do_restore_ui_file): Likewise.
(do_value_free): Likewise.
(do_free_so): Likewise.
(free_current_contents): Likewise.
(do_regfree_cleanup): Likewise.
(core_addr_hash): Likewise.
(core_addr_eq): Likewise.
(do_free_char_ptr_vec): Likewise.
* v850-tdep.c (v850_frame_cache): Likewise.
* varobj.c (do_free_variable_cleanup): Likewise.
* vax-tdep.c (vax_supply_gregset): Likewise.
(vax_frame_cache): Likewise.
* vaxobsd-tdep.c (vaxobsd_sigtramp_frame_cache): Likewise.
* xml-support.c (gdb_xml_body_text): Likewise.
(gdb_xml_values_cleanup): Likewise.
(gdb_xml_start_element): Likewise.
(gdb_xml_start_element_wrapper): Likewise.
(gdb_xml_end_element): Likewise.
(gdb_xml_end_element_wrapper): Likewise.
(gdb_xml_cleanup): Likewise.
(gdb_xml_fetch_external_entity): Likewise.
(gdb_xml_parse_attr_enum): Likewise.
(xinclude_start_include): Likewise.
(xinclude_end_include): Likewise.
(xml_xinclude_default): Likewise.
(xml_xinclude_start_doctype): Likewise.
(xml_xinclude_end_doctype): Likewise.
(xml_xinclude_cleanup): Likewise.
(xml_fetch_content_from_file): Likewise.
* xml-syscall.c (free_syscalls_info): Likewise.
(syscall_start_syscall): Likewise.
* xml-tdesc.c (tdesc_end_arch): Likewise.
(tdesc_end_osabi): Likewise.
(tdesc_end_compatible): Likewise.
(tdesc_start_target): Likewise.
(tdesc_start_feature): Likewise.
(tdesc_start_reg): Likewise.
(tdesc_start_union): Likewise.
(tdesc_start_struct): Likewise.
(tdesc_start_flags): Likewise.
(tdesc_start_field): Likewise.
(tdesc_start_vector): Likewise.
(fetch_available_features_from_target): Likewise.
* xstormy16-tdep.c (xstormy16_frame_cache): Likewise.
* xtensa-tdep.c (xtensa_supply_gregset): Likewise.
(xtensa_frame_cache): Likewise.
(xtensa_frame_prev_register): Likewise.
(xtensa_extract_return_value): Likewise.
|
|
The "set serial parity" command allows the user to control which
parity to use when communicating over a serial connection, rather
than having the parity hardcoded to none.
gdb/ChangeLog:
* NEWS: Mention set/show serial parity command.
* monitor.c (monitor_open): Call serial_setparity.
* remote.c (remote_open_1): Likewise.
* ser-base.c (ser_base_serparity): New function.
* ser-base.h (ser_base_setparity): Add declaration.
* ser-go32.c (dos_ops): Set "setparity" field.
* ser-mingw.c (ser_windows_raw): Do not set state.fParity and
state.Parity.
(ser_windows_setparity): New function.
(hardwire_ops): Add ser_windows_setparity.
(tty_ops): Add NULL for setparity field.
(pipe_ops): Add ser_base_setparity.
(tcp_ops): Likewise.
* ser-pipe.c (pipe_ops): Likewise.
* ser-tcp.c (tcp_ops): Likewise.
* ser-unix.c (hardwire_setparity): Add declaration.
(hardwire_raw): Don't reset PARENB flag.
(hardwire_setparity): New function.
(hardwire_ops): Add hardwire_setparity.
* serial.c (serial_setparity): New function.
(serial_parity): New global.
(parity_none, parity_odd, parity_even, parity_enums, parity):
New static globals.
(set_parity): New function.
(_initialize_serial): Add set/show serial parity commands.
* serial.h (GDBPARITY_NONE): Define.
(GDBPARITY_ODD): Define.
(GDBPARITY_EVEN): Define.
(serial_setparity) Add declaration.
(struct serial_ops): Add setparity field.
* target.h (serial_parity): Add declaration.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote configuration): Document "set/show
serial parity" command.
|
|
This commit introduces a new inline common function "startswith"
which takes two string arguments and returns nonzero if the first
string starts with the second. It also updates the 295 places
where this logic was written out longhand to use the new function.
gdb/ChangeLog:
* common/common-utils.h (startswith): New inline function.
All places where this logic was used updated to use the above.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
This commit includes string.h in common-defs.h and removes all other
inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include string.h.
* aarch64-tdep.c: Do not include string.h.
* ada-exp.y: Likewise.
* ada-lang.c: Likewise.
* ada-lex.l: Likewise.
* ada-typeprint.c: Likewise.
* ada-valprint.c: Likewise.
* aix-thread.c: Likewise.
* alpha-linux-tdep.c: Likewise.
* alpha-mdebug-tdep.c: Likewise.
* alpha-nat.c: Likewise.
* alpha-osf1-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* alphanbsd-tdep.c: Likewise.
* amd64-dicos-tdep.c: Likewise.
* amd64-linux-tdep.c: Likewise.
* amd64-nat.c: Likewise.
* amd64-sol2-tdep.c: Likewise.
* amd64fbsd-tdep.c: Likewise.
* amd64obsd-tdep.c: Likewise.
* arch-utils.c: Likewise.
* arm-linux-nat.c: Likewise.
* arm-linux-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* arm-wince-tdep.c: Likewise.
* armbsd-tdep.c: Likewise.
* armnbsd-nat.c: Likewise.
* armnbsd-tdep.c: Likewise.
* armobsd-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* ax-gdb.c: Likewise.
* ax-general.c: Likewise.
* bcache.c: Likewise.
* bfin-tdep.c: Likewise.
* breakpoint.c: Likewise.
* build-id.c: Likewise.
* buildsym.c: Likewise.
* c-exp.y: Likewise.
* c-lang.c: Likewise.
* c-typeprint.c: Likewise.
* c-valprint.c: Likewise.
* charset.c: Likewise.
* cli-out.c: Likewise.
* cli/cli-cmds.c: Likewise.
* cli/cli-decode.c: Likewise.
* cli/cli-dump.c: Likewise.
* cli/cli-interp.c: Likewise.
* cli/cli-logging.c: Likewise.
* cli/cli-script.c: Likewise.
* cli/cli-setshow.c: Likewise.
* cli/cli-utils.c: Likewise.
* coffread.c: Likewise.
* common/agent.c: Likewise.
* common/buffer.c: Likewise.
* common/buffer.h: Likewise.
* common/common-utils.c: Likewise.
* common/filestuff.c: Likewise.
* common/filestuff.c: Likewise.
* common/format.c: Likewise.
* common/print-utils.c: Likewise.
* common/rsp-low.c: Likewise.
* common/signals.c: Likewise.
* common/vec.h: Likewise.
* common/xml-utils.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-name-parser.y: Likewise.
* cp-support.c: Likewise.
* cp-valprint.c: Likewise.
* cris-tdep.c: Likewise.
* d-exp.y: Likewise.
* darwin-nat.c: Likewise.
* dbxread.c: Likewise.
* dcache.c: Likewise.
* demangle.c: Likewise.
* dicos-tdep.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dsrec.c: Likewise.
* dummy-frame.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* elfread.c: Likewise.
* environ.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* exceptions.c: Likewise.
* exec.c: Likewise.
* expprint.c: Likewise.
* f-exp.y: Likewise.
* f-lang.c: Likewise.
* f-typeprint.c: Likewise.
* f-valprint.c: Likewise.
* fbsd-nat.c: Likewise.
* findcmd.c: Likewise.
* findvar.c: Likewise.
* fork-child.c: Likewise.
* frame.c: Likewise.
* frv-linux-tdep.c: Likewise.
* frv-tdep.c: Likewise.
* gdb.c: Likewise.
* gdb_bfd.c: Likewise.
* gdbarch.c: Likewise.
* gdbarch.sh: Likewise.
* gdbtypes.c: Likewise.
* gnu-nat.c: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-exp.y: Likewise.
* go-lang.c: Likewise.
* go32-nat.c: Likewise.
* guile/guile.c: Likewise.
* guile/scm-auto-load.c: Likewise.
* hppa-hpux-tdep.c: Likewise.
* hppa-linux-nat.c: Likewise.
* hppanbsd-tdep.c: Likewise.
* hppaobsd-tdep.c: Likewise.
* i386-cygwin-tdep.c: Likewise.
* i386-dicos-tdep.c: Likewise.
* i386-linux-tdep.c: Likewise.
* i386-nto-tdep.c: Likewise.
* i386-sol2-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* i386bsd-tdep.c: Likewise.
* i386gnu-nat.c: Likewise.
* i386nbsd-tdep.c: Likewise.
* i386obsd-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* ia64-libunwind-tdep.c: Likewise.
* ia64-linux-nat.c: Likewise.
* inf-child.c: Likewise.
* inf-ptrace.c: Likewise.
* inf-ttrace.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* inflow.c: Likewise.
* infrun.c: Likewise.
* interps.c: Likewise.
* iq2000-tdep.c: Likewise.
* irix5-nat.c: Likewise.
* jv-exp.y: Likewise.
* jv-lang.c: Likewise.
* jv-typeprint.c: Likewise.
* jv-valprint.c: Likewise.
* language.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Likewise.
* lm32-tdep.c: Likewise.
* m2-exp.y: Likewise.
* m2-typeprint.c: Likewise.
* m32c-tdep.c: Likewise.
* m32r-linux-nat.c: Likewise.
* m32r-linux-tdep.c: Likewise.
* m32r-rom.c: Likewise.
* m32r-tdep.c: Likewise.
* m68hc11-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m68kbsd-tdep.c: Likewise.
* m68klinux-nat.c: Likewise.
* m68klinux-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* machoread.c: Likewise.
* macrocmd.c: Likewise.
* main.c: Likewise.
* mdebugread.c: Likewise.
* mem-break.c: Likewise.
* memattr.c: Likewise.
* memory-map.c: Likewise.
* mep-tdep.c: Likewise.
* mi/mi-cmd-break.c: Likewise.
* mi/mi-cmd-disas.c: Likewise.
* mi/mi-cmd-env.c: Likewise.
* mi/mi-cmd-stack.c: Likewise.
* mi/mi-cmd-var.c: Likewise.
* mi/mi-cmds.c: Likewise.
* mi/mi-console.c: Likewise.
* mi/mi-getopt.c: Likewise.
* mi/mi-interp.c: Likewise.
* mi/mi-main.c: Likewise.
* mi/mi-parse.c: Likewise.
* microblaze-rom.c: Likewise.
* microblaze-tdep.c: Likewise.
* mingw-hdep.c: Likewise.
* minidebug.c: Likewise.
* minsyms.c: Likewise.
* mips-irix-tdep.c: Likewise.
* mips-linux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* mips64obsd-tdep.c: Likewise.
* mipsnbsd-tdep.c: Likewise.
* mipsread.c: Likewise.
* mn10300-linux-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* monitor.c: Likewise.
* moxie-tdep.c: Likewise.
* mt-tdep.c: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-procfs.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/linux-waitpid.c: Likewise.
* nbsd-tdep.c: Likewise.
* nios2-linux-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* nto-tdep.c: Likewise.
* objc-lang.c: Likewise.
* objfiles.c: Likewise.
* opencl-lang.c: Likewise.
* osabi.c: Likewise.
* osdata.c: Likewise.
* p-exp.y: Likewise.
* p-lang.c: Likewise.
* p-typeprint.c: Likewise.
* parse.c: Likewise.
* posix-hdep.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* ppcfbsd-tdep.c: Likewise.
* ppcnbsd-tdep.c: Likewise.
* ppcobsd-tdep.c: Likewise.
* printcmd.c: Likewise.
* procfs.c: Likewise.
* prologue-value.c: Likewise.
* python/py-auto-load.c: Likewise.
* python/py-gdb-readline.c: Likewise.
* ravenscar-thread.c: Likewise.
* regcache.c: Likewise.
* registry.c: Likewise.
* remote-fileio.c: Likewise.
* remote-m32r-sdi.c: Likewise.
* remote-mips.c: Likewise.
* remote-notif.c: Likewise.
* remote-sim.c: Likewise.
* remote.c: Likewise.
* reverse.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* ser-base.c: Likewise.
* ser-go32.c: Likewise.
* ser-mingw.c: Likewise.
* ser-pipe.c: Likewise.
* ser-tcp.c: Likewise.
* ser-unix.c: Likewise.
* serial.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* shnbsd-tdep.c: Likewise.
* skip.c: Likewise.
* sol-thread.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-frv.c: Likewise.
* solib-osf.c: Likewise.
* solib-som.c: Likewise.
* solib-spu.c: Likewise.
* solib-target.c: Likewise.
* solib.c: Likewise.
* somread.c: Likewise.
* source.c: Likewise.
* sparc-nat.c: Likewise.
* sparc-sol2-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* sparc64fbsd-tdep.c: Likewise.
* sparc64nbsd-tdep.c: Likewise.
* sparcnbsd-tdep.c: Likewise.
* spu-linux-nat.c: Likewise.
* spu-multiarch.c: Likewise.
* spu-tdep.c: Likewise.
* stabsread.c: Likewise.
* stack.c: Likewise.
* std-regs.c: Likewise.
* symfile.c: Likewise.
* symmisc.c: Likewise.
* symtab.c: Likewise.
* target.c: Likewise.
* thread.c: Likewise.
* tilegx-linux-nat.c: Likewise.
* tilegx-tdep.c: Likewise.
* top.c: Likewise.
* tracepoint.c: Likewise.
* tui/tui-command.c: Likewise.
* tui/tui-data.c: Likewise.
* tui/tui-disasm.c: Likewise.
* tui/tui-file.c: Likewise.
* tui/tui-layout.c: Likewise.
* tui/tui-out.c: Likewise.
* tui/tui-regs.c: Likewise.
* tui/tui-source.c: Likewise.
* tui/tui-stack.c: Likewise.
* tui/tui-win.c: Likewise.
* tui/tui-windata.c: Likewise.
* tui/tui-winsource.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* ui-out.c: Likewise.
* user-regs.c: Likewise.
* utils.c: Likewise.
* v850-tdep.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* vax-tdep.c: Likewise.
* vaxnbsd-tdep.c: Likewise.
* vaxobsd-tdep.c: Likewise.
* windows-nat.c: Likewise.
* xcoffread.c: Likewise.
* xml-support.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-linux-nat.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include string.h.
* event-loop.c: Likewise.
* linux-low.c: Likewise.
* regcache.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
|
|
Currently there are many calls to help_list that pass the constant -1
as the "class" value. However, the parameter is declared as being of
type enum command_class, and uses of the constant violate this
abstraction.
This patch fixes the error everywhere it occurs in the gdb sources.
Tested by rebuilding.
2014-06-13 Tom Tromey <tromey@redhat.com>
* cp-support.c (maint_cplus_command): Pass all_commands, not -1,
to help_list.
* guile/guile.c (info_guile_command): Pass all_commands, not -1,
to help_list.
* tui/tui-win.c (tui_command): Pass all_commands, not -1, to
help_list.
* tui/tui-regs.c (tui_reg_command): Pass all_commands, not -1, to
help_list.Pass all_commands, not -1, to help_list.
* cli/cli-dump.c (dump_command, append_command)
(srec_dump_command, ihex_dump_command, tekhex_dump_command)
(binary_dump_command, binary_append_command): Pass all_commands,
not -1, to help_list.
* cli/cli-cmds.c (info_command, set_debug): Pass all_commands, not
-1, to help_list.
* valprint.c (set_print, set_print_raw): Pass all_commands, not
-1, to help_list.
* typeprint.c (set_print_type): Pass all_commands, not -1, to
help_list.
* top.c (set_history): Pass all_commands, not -1, to help_list.
* target-descriptions.c (set_tdesc_cmd, unset_tdesc_cmd): Pass
all_commands, not -1, to help_list.
* symfile.c (overlay_command): Pass all_commands, not -1, to
help_list.
* spu-tdep.c (info_spu_command): Pass all_commands, not -1, to
help_list.
* serial.c (serial_set_cmd): Pass all_commands, not -1, to
help_list.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Pass all_commands, not
-1, to help_list.
* remote.c (remote_command, set_remote_cmd): Pass all_commands,
not -1, to help_list.
* ravenscar-thread.c (set_ravenscar_command): Pass all_commands,
not -1, to help_list.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_print_command, maintenance_set_cmd): Pass
all_commands, not -1, to help_list.
* macrocmd.c (macro_command): Pass all_commands, not -1, to
help_list.
* language.c (set_check): Pass all_commands, not -1, to help_list.
* infcmd.c (unset_command): Pass all_commands, not -1, to
help_list.
* frame.c (set_backtrace_cmd): Pass all_commands, not -1, to
help_list.
* dwarf2read.c (set_dwarf2_cmd): Pass all_commands, not -1, to
help_list.
* dcache.c (set_dcache_command): Pass all_commands, not -1, to
help_list.
* breakpoint.c (save_command): Pass all_commands, not -1, to
help_list.
* ada-lang.c (maint_set_ada_cmd, set_ada_command): Pass
all_commands, not -1, to help_list.
|
|
I noticed that, when using 'set debug serial 1', the "write" traces
would always be NUL characters:
[
w \x00][\x00][\x00][\x00][\x00][etc]
This is due to a small thinko in the loop that output each character,
where we accidently used the loop boundary instead of the loop index
to index the character to be printed.
After this patch is applied, the output now becomes:
[
w $][v][C][o][n][t][?][#][4][9]
gdb/ChangeLog:
* serial.c (serial_write): Fix index of character to be printed
in call to serial_logchar when serial debug traces are enabled.
|
|
This patch removes support for the "set/show remotebaud" command,
which were deprecated in GDB 7.7, and should be now be removed
ahead of cutting the GDB 7.8 branch.
gdb/ChangeLog:
* serial.c (_initialize_serial): Remove support for
the "set remotebaud" and "show remotebaud" commands.
* NEWS: Add entry documenting the removal of that command.
gdb/testsuite/ChangeLog:
* config/monitor.exp (gdb_target_monitor): Replace use of
"set remotebaud" by "set serial baud".
|
|
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_log_command>: Add argument.
(target_log_command): Add argument.
* serial.h (serial_log_command): Add 'self' argument.
* serial.c (serial_log_command): Add 'self' argument.
|
|
This removes XCALLOC and replaces it either with XCNEWVEC, or, if the
number of elements being requested was 1, with XCNEW.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XCALLOC): Remove.
* bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
(print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_symfile_segments): Likewise.
* gdbtypes.c (copy_type_recursive): Likewise.
* i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
* jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
* minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
XCALLOC.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
XCALLOC.
* psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
* regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
* registry.c (registry_alloc_data): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* serial.c (serial_fdopen_ops): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
XCALLOC.
* spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
* symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
not XCALLOC.
|
|
This replaces XMALLOC with XNEW, and removes XMALLOC. The only
non-mechanical bit here was remembering to edit gdbarch.sh.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XMALLOC): Remove.
* avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* cli-out.c (struct ui_out *): Likewise.
* cli/cli-dump.c (add_dump_command): Likewise.
(add_dump_command): Likewise.
* complaints.c (get_complaints): Likewise.
(find_complaint): Likewise.
* dwarf2-frame.c (execute_cfa_program): Likewise.
* dwarf2read.c (abbrev_table_read_table): Likewise.
* gdbarch.sh: Likewise.
* gdbarch.c: Rebuild.
* inf-ttrace.c (inf_ttrace_add_page): Likewise.
* interps.c (interp_new): Likewise.
* lm32-tdep.c (lm32_gdbarch_init): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* mi/mi-console.c (mi_console_file_new): Likewise.
* mi/mi-interp.c (mi_interpreter_init): Likewise.
* mi/mi-out.c (mi_out_new): Likewise.
* mi/mi-parse.c (mi_parse): Likewise.
* microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* observer.c (xalloc_observer_list_node): Likewise.
* regcache.c (regcache_xmalloc_1): Likewise.
* reggroups.c (reggroup_new): Likewise.
(_initialize_reggroup): Likewise.
* registry.c (register_data_with_cleanup): Likewise.
* remote.c (remote_notif_stop_alloc_reply): Likewise.
* ser-base.c (serial_ttystate): Likewise.
* ser-mingw.c (make_pipe_state): Likewise.
* ser-pipe.c (pipe_open): Likewise.
* serial.c (serial_open): Likewise.
* sh64-tdep.c (sh64_gdbarch_init): Likewise.
* tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
(tui_alloc_win_info): Likewise.
(tui_add_content_elements): Likewise.
* tui/tui-file.c (tui_file_new): Likewise.
* tui/tui-out.c (tui_out_new): Likewise.
* ui-file.c (mem_file_new): Likewise.
* ui-out.c (push_level): Likewise.
(make_cleanup_ui_out_end): Likewise.
(append_header_to_list): Likewise.
(ui_out_new): Likewise.
* user-regs.c (user_reg_add_builtin): Likewise.
|
|
|
|
I noticed that the serial_ops vtable is not const, but really it ought
to be.
This patch constifies it, removing the only mutable field in the
process.
Tested by rebuilding on x86-64 Fedora 18, both natively and using the
mingw cross tools.
2013-12-19 Tom Tromey <tromey@redhat.com>
* serial.c (serial_ops_p): New typedef.
(serial_ops_list): Now a VEC.
(serial_interface_lookup): Return const. Use VEC_iterate.
(serial_add_interface): Make parameter const.
(serial_open): Update.
(serial_fdopen_ops): Make 'ops' const.
(serial_pipe): Update.
* ser-tcp.c (_initialize_ser_tcp): Update.
* ser-pipe.c (_initialize_ser_pipe): Update.
* ser-unix.c (_initialize_ser_hardwire): Update.
* ser-mingw.c (_initialize_ser_windows): Update.
* ser-go32.c (dos_ops): Now const. Update.
* serial.h (struct serial) <ops>: Now const.
(struct serial_ops) <next>: Remove.
(serial_add_interface): Make parameter const.
|
|
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
|
|
This patch renames the "set/show remotebaud" commands into
"set/show serial baud", and moves its implementation into serial.c.
It also moves the "baud_rate" global from top.c to serial.c, where
the new code is being added (the alternative was to add an include
of target.h).
And to facilitate the transition to the new setting name, this
patch also preserves the old commands, and marks them as deprecated
to alert the users of the change.
gdb/ChangeLog:
* cli/cli-cmds.c (show_baud_rate): Moved to serial.c as
serial_baud_show_cmd.
(_initialize_cli_cmds): Delete the code creating the
"set/show remotebaud" commands.
* serial.c (baud_rate): Move here from top.c.
(serial_baud_show_cmd): Move here from cli/cli-cmds.c.
(_initialize_serial): Create "set/show serial baud" commands.
Add "set/show remotebaud" command aliases.
* top.c (baud_rate): Moved to serial.c.
* NEWS: Document the new "set/show serial baud" commands,
replacing "set/show remotebaud".
gdb/doc/ChangeLog:
* gdb.texinfo: Replace "set remotebaud" and "show remotebaud"
by "set serial baud" and "show serial baud" (resp) throughout.
|
|
While remote.c works with "char *" buffers most of the time, other
remote targets have binary-ish-er protocols, and choose to use
"unsigned char" throughout, like e.g., remote-mips.c or
remote-m32r-sdi.c. That results in -Wpointer-sign warnings in those
targets, unless we add casts in calls to serial_write. Since
serial_write is only concerned about sending raw host bytes out, and
serial_ops->write_prim already works with "void *"/"size_t", a similar
interface to the "write" or "send" system calls, I find it natural to
change serial_write's prototype accordingly, avoiding the need for
casts.
Tested on x86_64 Fedora 17, and also by building x86_64-mingw32
and DJGPP/go32 -hosted gdbs.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* ser-base.c (ser_base_write): Change prototype -- take 'void *'
buffer and size_t size. Adjust.
* ser-base.h (ser_base_write): Adjust.
* ser-go32.c (cnts): Change type to size_t.
(dos_write): Change prototype -- take 'void *'
buffer and size_t size. Adjust.
(dos_info): Print elements of 'cnts' as unsigned long.
* serial.c (serial_write): Likewise.
* serial.h (serial_write): Adjust.
(struct serial_ops) <write>: Change prototype -- take 'void *'
buffer and size_t size. Adjust.
|
|
(trace_pass_command): Likewise.
* cli/cli-cmds.c: Include cli/cli-utils.h.
(source_command): Use skip-spaces.
(disassemble_command): Likewise.
* findcmd.c: Include cli/cli-utils.h.
(parse_find_args): Use skip_spaces.
* go32-nat.c: Include cli/cli-utils.h.
(go32_sldt): Use skip_spaces.
(go32_sgdt): Likewise.
(go32_sidt): Likewise.
(go32_pde): Likewise.
(go32_pte): Likewise.
(go32_pte_for_address): Likewise.
* infcmd.c: Include cli/cli-utils.h.
(registers_info): Use skip_spaces.
* linux-tdep.c (read_mapping): Use skip_spaces_const.
(linux_info_proc): Likewise.
* linux-thread-db.c: Include cli/cli-utils.h.
(info_auto_load_libthread_db): Use skip_spaces_const.
* m32r-rom.c: Include cli/cli-utils.h.
(m32r_upload_command): Use skip_spaces.
* maint.c: Include cli/cli-utils.h.
(maintenance_translate_address): Use skip_spaces.
* mi/mi-parse.c: Include cli/cli-utils.h.
(mi_parse_argv): Use skip_spaces.
(mi_parse): Likewise.
* minsyms.c: Include cli/cli-utils.h.
(msymbol_hash_iw): Use skip_spaces_const.
* objc-lang.c: Include cli/cli-utils.h.
(parse_selector): Use skip_spaces.
(parse_method): Likewise.
* python/python.c: Include cli/cli-utils.h.
(python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
(python_command)[HAVE_PYTHON]: Likewise.
(python_interactive_command)[!HAVE_PYTHON]: Likewise.
* remote-m32r-sdi.c: Include cli/cli-utils.h.
(m32r_load): Use skip_spaces.
* serial.c: Include cli/cli-utils.h.
(serial_open): Use skip_spaces_const.
* stack.c: Include cli/cli-utils.h.
(parse_frame_specification_1): Use skip_spaces_const.
* symfile.c: Include cli/cli-utils.h.
(set_ext_lang_command): Use skip_spaces.
* symtab.c: Include cli/cli-utils.h.
(rbreak_command): Use skip_spaces.
* thread.c (thread_name_command): Use skip_spaces.
* tracepoint.c (validate_actionline): Use skip_spaces.
(encode_actions_1): Likewise.
(trace_find_range_command): Likewise.
(trace_find_outside_command): Likewise.
(trace_dump_actions): Likewise.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
* serial.h (deprecated_serial_fd): Remove.
|
|
* dwarf2loc.c (entry_values_debug): Add 'unsigned'.
(_initialize_dwarf2loc): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* dwarf2loc.h: Update the declaration of 'entry_values_debug'.
* dwarf2read.c (dwarf2_die_debug): Add 'unsigned'.
(_initialize_dwarf2_read): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* darwin-nat.c (dwarwin_debug_flag): Add 'unsigned'.
(_initialize_darwin_inferior): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* frame.c (frame_debug): Add 'unsigned'.
(_intialize_frame): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* frame.h: Update the declaration of 'frame_debug'.
* gdbtypes.c (overload_debug): Add 'unsigned'.
(_initialize_gdbtypes): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* inferior.h: Update declaration of 'debug_infrun'.
* infrun.c (debug_infrun): Add 'unsigned'.
(_initialize_infrun): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* jit.c (jit_debug): Add 'unsigned'.
(_initialize_jit): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* linux-nat.c (debug_linux_nat): Add 'unsigned'.
(_initialize_linux_nat): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* linux-thread-db.c (libthread_db_debug): Add 'unsigned'.
(_initialize_thread_db): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* machoread.c (mach_o_debug_level): Add 'unsigned'.
(_initialize_machoread): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* mi/mi-cmd-var.c: Update the declaration of 'varobjdebug'.
* microblaze-tdep.c (microblaze_debug_flag): Add 'unsigned'.
(_initialize_microblaze_tdep): Call add_setshow_zuinteger_cmd
intead of add_setshow_zinteger_cmd.
* mips-tdep.c (mips_debug): Add 'unsigned'.
(_initialize_mips_tdep): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* monitor.c (monitor_debug): Add 'unsigned'.
(_initialize_remote_monitors): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* observer.c (observer_debug): Add 'unsigned'.
(_initialize_observer): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* parse.c (expressiondebug): Add 'unsigned'.
(_initialize_parse): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* record.c (record_debug): Add 'unsigned'.
(_initialize_record): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* record.h: Update the declaration of 'record_debug'.
* stap-probe.c (stap_expression_debug): Add 'unsigned'.
(_initialize_stap_probe): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* serial.c (global_serial_debug_p): Add 'unsigned'.
(_initialize_serial): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* solib-dsbt.c (solib_dsbt_debug): Add 'unsigned'.
(_initialize_dsbt_solib): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* solib-frv.c (solib_frv_debug): Add 'unsigned'.
(_initialize_frv_solib): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* target.c (targetdebug): Add 'unsigned'.
(initialize_targets): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* valops.c (overload_debug): Add 'unsigned'.
* varobj.c (varobjdebug): Add 'unsigned'.
(_initialize_varobj): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* xtensa-tdep.c (xtensa_debug_level): Add 'unsigned'.
(_initialize_xtensa_tdep): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* arch-utils.h: Remove the declaration of 'gdbarch_debug'.
* gdbarch.sh (gdbarch_debug): Add 'unsigned'.
(extern void _initialize_gdbarch): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* gdbarch.c, gdbarch.h: Re-generated.
|
|
Partial revert of previous change.
* serial.c (scb_base): New global.
(serial_for_fd): New.
(serial_open, serial_fdopen_ops): Link new serial in open serials
chain.
(do_serial_close): Unlink serial from the open serials chain.
|
|
* ser-base.c (run_async_handler_and_reschedule): New.
(fd_event, push_event): Use it.
* serial.c (serial_open, serial_fdopen_ops): Set the initial
reference count to 1.
(do_serial_close): Set the bufp field to NULL. Use serial_unref
instead of xfree.
(serial_is_open, serial_ref, serial_unref): New.
* serial.h (serial_open): Adjust comment.
(serial_is_open): Declare.
(serial_close): Adjust comment.
(serial_ref, serial_unref) Declare.
(struct serial): New field 'refcnt'.
|
|
Remove #if 0'd "connect" command, and unnecessary associated
refcounting and serial reuse bits.
* serial.h (struct serial): Remove fields 'next' and 'refcnt'.
* serial.c (last_serial_opened): Delete.
(scb_base): Delete.
(serial_open): Adjust.
(serial_for_fd): Delete.
(serial_fdopen_ops, do_serial_close): Adjust.
(serial_fdopen_ops): Adjust.
|
|
* serial.c (do_serial_close): Remove early return when SCB is
null.
|
|
Code cleanup: Make 1440 bytes of data segment read-only.
* arch-utils.c (endian_enum): Make it const char *const [].
* arm-tdep.c (fp_model_strings, arm_abi_strings, arm_mode_strings):
Likewise.
* breakpoint.c (always_inserted_enums): Likewise.
* cli/cli-cmds.c (script_ext_enums): Likewise.
* cli/cli-decode.c (add_setshow_enum_cmd, complete_on_enum): Make the
enumlist parameter const char *const *.
* cli/cli-decode.h (struct cmd_list_element): Make the enums field
const char *const *.
* command.h (complete_on_enum, add_setshow_enum_cmd): Make the enumlist
parameter const char *const *.
* cris-tdep.c (cris_modes): Make it const char *const [].
* filesystem.c (target_file_system_kinds): Likewise.
* i386-tdep.c (valid_flavors, valid_conventions): Likewise.
* infrun.c (follow_fork_mode_kind_names, follow_exec_mode_names)
(can_use_displaced_stepping_enum, scheduler_enums)
(exec_direction_names): Likewise.
* language.c (_initialize_language): Make the type_or_range_names and
case_sensitive_names variables const char *const [].
* mips-tdep.c (mips_abi_strings): Make it const char *const [].
* python/python.c (python_excp_enums): Likewise.
* remote.c (interrupt_sequence_modes): Likewise.
* rs6000-tdep.c (powerpc_vector_strings): Likewise.
* serial.c (logbase_enums): Likewise.
* sh-tdep.c (sh_cc_enum): Likewise.
* stack.c (print_frame_arguments_choices, print_entry_values_choices):
Likewise.
* symtab.c (multiple_symbols_modes): Likewise.
* tui/tui-win.c (tui_border_kind_enums, tui_border_mode_enums):
Likewise.
* utils.c (internal_problem_modes): Likewise.
|
|
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
(terminal_save_ours): Remove misleading comment.
(inflow_inferior_data_cleanup): Free ttystate.
(inflow_inferior_exit): Likewise.
(copy_terminal_info): Copy ttystate.
* serial.c (serial_copy_tty_state): New function.
* serial.h (serial_copy_tty_state): Add prototype.
(struct serial_ops): Add copy_tty_state callback.
* ser-base.c (ser_base_copy_tty_state): New function.
* ser-base.h (ser_base_copy_tty_state): Add prototype.
* ser-go32.c (dos_copy_tty_state): New function.
(dos_ops): Install copy_tty_state callback.
* ser-mingw.c (_initialize_ser_windows): Likewise.
* ser-pipe.c (_initialize_ser_pipe): Likewise.
* ser-unix.c (hardwire_copy_tty_state): New function.
(_initialize_ser_hardwire): Install it.
|
|
* darwin-nat-info.c: Fix comment typo.
* dwarf2expr.h: Ditto.
* fbsd-nat.c: Ditto.
* fbsd-nat.h: Ditto.
* frame-unwind.h: Ditto.
* frame.h: Ditto.
* hppa-hpux-tdep.c: Ditto.
* i386-linux-nat.c: Ditto.
* linux-nat.c: Ditto.
* nbsd-nat.c: Ditto.
* nbsd-nat.h: Ditto.
* ppc-linux-tdep.c: Ditto.
* serial.c: Ditto.
* ui-file.h: Ditto.
* tui/tui-winsource.c: Ditto.
|
|
* s390-tdep.c: Comment cleanup, mostly periods and spaces.
* score-tdep.c: Ditto.
* score-tdep.h: Ditto.
* ser-base.c: Ditto.
* ser-go32.c: Ditto.
* serial.c: Ditto.
* serial.h: Ditto.
* ser-mingw.c: Ditto.
* ser-pipe.c: Ditto.
* ser-tcp.c: Ditto.
* ser-unix.c: Ditto.
* sh64-tdep.c: Ditto.
* shnbsd-nat.c: Ditto.
* sh-tdep.c: Ditto.
* sh-tdep.h: Ditto.
* solib.c: Ditto.
* solib-darwin.c: Ditto.
* solib-frv.c: Ditto.
* solib.h: Ditto.
* solib-irix.c: Ditto.
* solib-osf.c: Ditto.
* solib-pa64.c: Ditto.
* solib-som.c: Ditto.
* solib-spu.c: Ditto.
* solib-sunos.c: Ditto.
* solib-svr4.c: Ditto.
* solist.h: Ditto.
* sol-thread.c: Ditto.
* somread.c: Ditto.
* source.c: Ditto.
* source.h: Ditto.
* sparc64-linux-tdep.c: Ditto.
* sparc64-tdep.c: Ditto.
* sparc-linux-nat.c: Ditto.
* sparc-linux-tdep.c: Ditto.
* sparc-sol2-nat.c: Ditto.
* sparc-sol2-tdep.c: Ditto.
* sparc-tdep.c: Ditto.
* sparc-tdep.h: Ditto.
* spu-tdep.c: Ditto.
* stabsread.c: Ditto.
* stabsread.h: Ditto.
* stack.c: Ditto.
* symfile.c: Ditto.
* symfile.h: Ditto.
* symmisc.c: Ditto.
* symtab.c: Ditto.
* symtab.h: Ditto.
* target.c: Ditto.
* target-descriptions.c: Ditto.
* target-descriptions.h: Ditto.
* target.h: Ditto.
* target-memory.c: Ditto.
* terminal.h: Ditto.
* thread.c: Ditto.
* top.c: Ditto.
* tracepoint.c: Ditto.
* tracepoint.h: Ditto.
* trad-frame.h: Ditto.
* typeprint.c: Ditto.
|
|
* addrmap.c: Shorten lines of >= 80 columns.
* arch-utils.c: Ditto.
* arch-utils.h: Ditto.
* ax-gdb.c: Ditto.
* ax-general.c: Ditto.
* bcache.c: Ditto.
* blockframe.c: Ditto.
* breakpoint.c: Ditto.
* buildsym.c: Ditto.
* c-lang.c: Ditto.
* c-typeprint.c: Ditto.
* charset.c: Ditto.
* coffread.c: Ditto.
* command.h: Ditto.
* corelow.c: Ditto.
* cp-abi.c: Ditto.
* cp-namespace.c: Ditto.
* cp-support.c: Ditto.
* dbug-rom.c: Ditto.
* dbxread.c: Ditto.
* defs.h: Ditto.
* dfp.c: Ditto.
* dfp.h: Ditto.
* dictionary.c: Ditto.
* disasm.c: Ditto.
* doublest.c: Ditto.
* dwarf2-frame.c: Ditto.
* dwarf2expr.c: Ditto.
* dwarf2loc.c: Ditto.
* dwarf2read.c: Ditto.
* elfread.c: Ditto.
* eval.c: Ditto.
* event-loop.c: Ditto.
* event-loop.h: Ditto.
* exceptions.h: Ditto.
* exec.c: Ditto.
* expprint.c: Ditto.
* expression.h: Ditto.
* f-lang.c: Ditto.
* f-valprint.c: Ditto.
* findcmd.c: Ditto.
* frame-base.c: Ditto.
* frame-unwind.c: Ditto.
* frame-unwind.h: Ditto.
* frame.c: Ditto.
* frame.h: Ditto.
* gcore.c: Ditto.
* gdb-stabs.h: Ditto.
* gdb_assert.h: Ditto.
* gdb_dirent.h: Ditto.
* gdb_obstack.h: Ditto.
* gdbcore.h: Ditto.
* gdbtypes.c: Ditto.
* gdbtypes.h: Ditto.
* inf-ttrace.c: Ditto.
* infcall.c: Ditto.
* infcmd.c: Ditto.
* inflow.c: Ditto.
* infrun.c: Ditto.
* inline-frame.h: Ditto.
* language.c: Ditto.
* language.h: Ditto.
* libunwind-frame.c: Ditto.
* libunwind-frame.h: Ditto.
* linespec.c: Ditto.
* linux-nat.c: Ditto.
* linux-nat.h: Ditto.
* linux-thread-db.c: Ditto.
* machoread.c: Ditto.
* macroexp.c: Ditto.
* macrotab.c: Ditto.
* main.c: Ditto.
* maint.c: Ditto.
* mdebugread.c: Ditto.
* memattr.c: Ditto.
* minsyms.c: Ditto.
* monitor.c: Ditto.
* monitor.h: Ditto.
* objfiles.c: Ditto.
* objfiles.h: Ditto.
* osabi.c: Ditto.
* p-typeprint.c: Ditto.
* p-valprint.c: Ditto.
* parse.c: Ditto.
* printcmd.c: Ditto.
* proc-events.c: Ditto.
* procfs.c: Ditto.
* progspace.c: Ditto.
* progspace.h: Ditto.
* psympriv.h: Ditto.
* psymtab.c: Ditto.
* record.c: Ditto.
* regcache.c: Ditto.
* regcache.h: Ditto.
* remote-fileio.c: Ditto.
* remote.c: Ditto.
* ser-mingw.c: Ditto.
* ser-tcp.c: Ditto.
* ser-unix.c: Ditto.
* serial.c: Ditto.
* serial.h: Ditto.
* solib-frv.c: Ditto.
* solib-irix.c: Ditto.
* solib-osf.c: Ditto.
* solib-pa64.c: Ditto.
* solib-som.c: Ditto.
* solib-sunos.c: Ditto.
* solib-svr4.c: Ditto.
* solib-target.c: Ditto.
* solib.c: Ditto.
* somread.c: Ditto.
* source.c: Ditto.
* stabsread.c: Ditto.
* stabsread.c: Ditto.
* stack.c: Ditto.
* stack.h: Ditto.
* symfile-mem.c: Ditto.
* symfile.c: Ditto.
* symfile.h: Ditto.
* symmisc.c: Ditto.
* symtab.c: Ditto.
* symtab.h: Ditto.
* target-descriptions.c: Ditto.
* target-memory.c: Ditto.
* target.c: Ditto.
* target.h: Ditto.
* terminal.h: Ditto.
* thread.c: Ditto.
* top.c: Ditto.
* tracepoint.c: Ditto.
* tracepoint.h: Ditto.
* ui-file.c: Ditto.
* ui-file.h: Ditto.
* ui-out.h: Ditto.
* user-regs.c: Ditto.
* user-regs.h: Ditto.
* utils.c: Ditto.
* valarith.c: Ditto.
* valops.c: Ditto.
* valprint.c: Ditto.
* valprint.h: Ditto.
* value.c: Ditto.
* varobj.c: Ditto.
* varobj.h: Ditto.
* vec.h: Ditto.
* xcoffread.c: Ditto.
* xcoffsolib.c: Ditto.
* xcoffsolib.h: Ditto.
* xml-syscall.c: Ditto.
* xml-tdesc.c: Ditto.
|
|
|
|
* serial.c (serial_interface_lookup): Take a const char pointer.
(serial_fdopen): Rename to ...
(serial_fdopen_ops): ... this. Add an OPS parameter and use it.
Call the OPS' fdopen function if there is one.
(serial_fdopen): Rewrite as wrapper to serial_fdopen_ops.
(serial_pipe): New.
(struct serial_ops) <fdopen>: New field.
* ser-mingw.c (free_pipe_state):
(free_pipe_state): Close output on non-pex pipes.
(pipe_windows_fdopen): New.
(gdb_pipe): New.
(_initialize_ser_windows): Register pipe_windows_fdopen.
* ser-go32.c (gdb_pipe): New.
* ser-pipe.c (pipe_close): Close file descriptor even if there's
no state pointer.
(pipe_ops): Delete.
(gdb_pipe): New.
|
|
* scm-exp.c: White space.
* scm-lang.c: White space.
* scm-valprint.c: White space.
* sentinel-frame.c: White space.
* ser-base.c: White space.
* ser-go32.c: White space.
* serial.c: White space.
* ser-mingw.c: White space.
* ser-pipe.c: White space.
* ser-tcp.c: White space.
* ser-unix.c: White space.
* solib.c: White space.
* solib-darwin.c: White space.
* solib-frv.c: White space.
* solib-irix.c: White space.
* solib-osf.c: White space.
* solib-pa64.c: White space.
* solib-som.c: White space.
* solib-spu.c: White space.
* solib-svr4.c: White space.
* solib-target.c: White space.
* source.c: White space.
* stabsread.c: White space.
* stack.c: White space.
* std-regs.c: White space.
* symfile.c: White space.
* symmisc.c: White space.
* symtab.c: White space.
|
|
* serial.c (serial_for_fd): Delete unused variable.
* mdebugread.c (psymtab_to_symtab_1): Delete unused variable.
* top.c (execute_command): Delete unused variable.
(init_main): Delete unused variable.
* utils.c (do_fclose_cleanup): Delete unused variable.
(do_all_inferior_continuations): Delete unused variable.
(initialize_utils): Delete unused variable.
(internal_problem_mode): Delete unused global.
* frame.c (get_prev_frame): Delete unused global.
(get_frame_locals_address): Delete unused global.
(get_frame_args_address): Delete unused global.
|
|
|
|
Automatic update by copyright.sh.
|
|
|
|
* serial.c (serial_async): Set the
handler function before enabling async
mode.
|
|
|
|
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
|
|
* serial.c (serial_open): Fix the OPEN parameter macro expansion.
|
|
via gdb_stderr.
* serial.c (serial_open): Set error_fd to -1.
* serial.h (struct serial): New field error_fd.
(struct serial_opts): New field avail.
* ser-pipe.c (pipe_open): Create another pair
of sockets. Pass stderr to gdb.
* ser-mingw.c (pipe_windows_open): Pass
PEX_STDERR_TO_PIPE to pex_run. Initialize
sd->error_fd.
(pipe_avail): New.
(_initialize_ser_windows): Hook pipe_avail.
* ser-base.c (generic_readchar): Check if there's
anything in stderr channel and route that to gdb_stderr.
|
|
|
|
* serial.c (serial_open): Strip leading spaces from program
name when opening pipe.
|
|
(struct ser_console_state, struct net_windows_state): Add exit_select,
have_stopped, thread.
(pipe_select_thread, console_select_thread)
(net_windows_select_thread): Don't create a local state copy or
close stop_select. Exit on exit_select instead of stop_select. Set
have_stopped.
(console_select_thread): Don't report control keypresses as pending
input.
(pipe_select_thread): Allow stop_select to interrupt sleeping.
(set_console_wait_handle): Create exit_select and have_stopped.
Save the thread handle. Check _kbhit before starting a thread.
(ser_console_done_wait_handle): New.
(ser_console_close): Close new handles. Wait for the thread to
exit.
(new_windows_select_thread): Assert that an event occurred.
(net_windows_wait_handle): Check for pending input before starting
a thread.
(net_windows_done_wait_handle): New.
(net_windows_open): Create exit_select and have_stopped.
Save the thread handle.
(net_windows_close): Close new handles. Wait for the thread to
exit.
(_intiialize_ser_windows): Register done_wait_handle methods.
* serial.c [USE_WIN32API] (serial_done_wait_handle): New.
* serial.h [USE_WIN32API] (struct serial_ops): Add done_wait_handle.
[USE_WIN32API] (serial_done_wait_handle): New prototype.
* mingw-hdep.c (gdb_select): Use serial_done_wait_handle.
|
|
2006-04-11 Jim Blandy <jimb@codesourcery.com>
* serial.c (serial_open): Check for special cases at the front of
the "device" name before scanning for the ':' that would indicate
an IP-based connection.
|
|
* Makefile.in (gdb_select_h, ser_tcp_h): New.
(ALLDEPFILES): Add ser-mingw.c.
(event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o)
(ser-tcp.o, ser-unix.o): Update.
(ser-mingw.o): New rule.
* configure: Regenerated.
* configure.ac: Add ser-mingw.o for mingw32.
* ser-mingw.c: New file.
* event-loop.c: Include "gdb_select.h".
(gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c.
* ser-base.c: Include "gdb_select.h".
(ser_base_wait_for): Use gdb_select.
* serial.c (serial_for_fd): New function.
(serial_fdopen): Try "terminal" before "hardwire". Initialize
the allocated struct serial.
(serial_wait_handle): New function.
* serial.h (serial_for_fd, serial_wait_handle): New prototypes.
(struct serial_ops) [USE_WIN32API]: Add wait_handle.
* gdb_select.h: New file.
* ser-tcp.c: Include "ser-tcp.h". Remove unused "ser-unix.h" include.
(net_close, net_read_prim, net_write_prim): Make global.
(net_open): Likewise. Pass an exception set to select. Whitespace fix.
Document why we can not use gdb_select.
(_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here.
* ser-tcp.h: New file.
* inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here.
(handle_sigio): Use gdb_select.
(initialize_stdin_serial): New function.
* terminal.h (initialize_stdin_serial): New prototype.
* top.c (gdb_init): Call initialize_stdin_serial.
* mingw-hdep.c (gdb_select): New function, moved from gdb_select in
event-loop.c. Add exception condition support. Use serial_for_fd
and serial_wait_handle. Fix timeout handling.
* posix-hdep.c: Include "gdb_select.h".
(gdb_select): New function.
* remote-st.c (connect_command): Use gdb_select.
* ser-unix.c: Include "gdb_select.h".
(hardwire_send_break, wait_for): Use gdb_select.
|
